You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » STD-EN 1XXXX

STD-EN 1XXXX

| 1 || 2 || 3 |

  • EN 1:1998 Flued oil stoves with vaporizing burners

  • EN 1:1998/A1:2007 Flued oil stoves with vaporizing burners

  • EN 1001-1:2005 Durability of wood and wood-based products – Terminology – Part 1: List of equivalent terms

  • EN 1001-2:2005 Durability of wood and wood based products – Terminology – Part 2: Vocabulary

  • EN 1004:2004 Mobile access and working towers made of prefabricated elements – Materials, dimensions, design loads, safety and performance requirements

  • EN 1005-1:2001+A1:2008 Safety of machinery – Human physical performance – Part 1: Terms and definitions

  • EN 1005-2:2003+A1:2008 Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery

  • EN 1005-3:2002+A1:2008 Safety of machinery – Human physical performance – Part 3: Recommended force limits for machinery operation

  • EN 1005-4:2005+A1:2008 Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery

  • EN 1005-5:2007 Safety of machinery – Human physical performance – Part 5: Risk assessment for repetitive handling at high frequency

  • EN 1006:2009 Advanced technical ceramics – Monolithic ceramics – Guidance on the selection of test pieces for the evaluation of properties

  • EN 1007-1:2002 Advanced technical ceramics – Ceramic composites – Methods of test for reinforcement – Part 1: Determination of size content

  • EN 1007-2:2002 Advanced technical ceramics – Ceramics composites – Methods of test for reinforcement – Part 2: Determination of linear density

  • EN 1007-3:2002 Advanced technical ceramics – Ceramic composites – Methods of test for reinforcement – Part 3: Determination of filament diameter and cross-section area

  • EN 1007-4:2004 Advanced technical ceramics – Ceramic composites – Methods of test for reinforcement – Part 4: Determination of tensile properties of filaments at ambient temperature

  • EN 1007-4:2004/AC:2007 Advanced technical ceramics – Ceramic composites – Methods of test for reinforcement – Part 4: Determination of tensile properties of filaments at ambient temperature

  • EN 1007-5:2010 Advanced technical ceramics – Ceramic composites – Methods of test for reinforcements – Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

  • EN 1007-6:2007 Advanced technical ceramic – Ceramic composites – Methods of test for reinforcements – Part 6: Determination of tensile properties of filaments at high temperature

  • EN 1007-7:2010 Advanced technical ceramics – Ceramic composites – Methods of test for reinforcements – Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature

  • EN 1008:2002 Mixing water for concrete – Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete

  • EN 1010-1:2004+A1:2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements

  • EN 1010-2:2006+A1:2010 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery

  • EN 1010-3:2002+A1:2009 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 3: Cutting machines

  • EN 1010-4:2004+A1:2009 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 4: Bookbinding, paper converting and finishing machines

  • EN 1010-5:2005 Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board

  • EN 1011-1:2009 Welding – Recommendations for welding of metallic materials – Part 1: General guidance for arc welding

  • EN 1011-2:2001 Welding – Recommendations for welding of metallic materials – Part 2: Arc welding of ferritic steels

  • EN 1011-2:2001/A1:2003 Welding – Recommendations for welding of metallic materials – Part 2: Arc welding of ferritic steels

  • EN 1011-3:2000 Welding – Recommendations for welding of metallic materials – Part 3: Arc welding of stainless steels

  • EN 1011-3:2000/A1:2003 Welding – Recommendations for welding of metallic materials – Part 3: Arc welding of stainless steels

  • EN 1011-4:2000 Welding – Recommendations for welding of metallic materials – Part 4: Arc welding of aluminium and aluminium alloys

  • EN 1011-4:2000/A1:2003 Welding – Recommendations for welding of metallic materials – Part 4: Arc welding of aluminium and aluminium alloys

  • EN 1011-5:2003 Welding – Recommendations for welding of metallic materials – Part 5: Welding of clad steel

  • EN 1011-6:2005 Welding – Recommendation for welding of metallic materials – Part 6: Laser beam welding

  • EN 1011-7:2004 Welding – Recommendations for welding of metallic materials – Part 7: Electron beam welding

  • EN 1011-8:2004 Welding – Recommendations for welding of metallic materials – Part 8: Welding of cast irons

  • EN 1013:2012 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings – Requirements and test methods

  • EN 1014-1:2010 Wood preservatives – Creosote and creosoted timber – Methods of sampling and analysis – Part 1: Procedure for sampling creosote

  • EN 1014-2:2010 Wood preservatives – Creosote and creosoted timber – Methods of sampling and analysis – Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis

  • EN 1014-3:2010 Wood preservatives – Creosote and creosoted timber – Methods of sampling and analysis – Part 3: Determination of the benzo(a)pyrene content of creosote

  • EN 1014-4:2010 Wood preservatives – Creosote and creosoted timber – Methods of sampling and analysis – Part 4: Determination of the water-extractable phenols content of creosote

  • EN 1015-1:1998 Methods of test for mortar for masonry – Part 1: Determination of particle size distribution (by sieve analysis)

  • EN 1015-1:1998/A1:2006 Methods of test for mortar for masonry – Part 1: Determination of particle size distribution (by sieve analysis)

  • EN 1015-10:1999 Methods of test for mortar for masonry – Part 10: Determination of dry bulk density of hardened mortar

  • EN 1015-10:1999/A1:2006 Methods of test for mortar for masonry – Part 10: Determination of dry bulk density of hardened mortar

  • EN 1015-11:1999 Methods of test for mortar for masonary – Part 11: Determination of flexural and compressive strength of hardened mortar

  • EN 1015-11:1999/A1:2006 Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar

  • EN 1015-12:2000 Methods of test of mortar for masonry – Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates

  • EN 1015-17:2000 Methods of test for mortar for masonry – Part 17: Determination of water-soluble chloride content of fresh mortars

  • EN 1015-17:2000/A1:2004 Methods or test for mortar for masonry – Part 17: Determination of water-soluble chloride content of fresh mortars

  • EN 1015-18:2002 Methods of test for mortar for masonry – Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar

  • EN 1015-19:1998 Methods of test for mortar for masonry – Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

  • EN 1015-19:1998/A1:2004 Methods of test for mortar for masonry – Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

  • EN 1015-2:1998 Methods of test for mortar for masonry – Part 2: Bulk sampling of mortars and preparation of test mortars

  • EN 1015-2:1998/A1:2006 Methods of test for mortar for masonry – Part 2: Bulk sampling of mortars and preparation of test mortars

  • EN 1015-21:2002 Methods of test for mortar for masonry – Part 21: Determination of the compatibility of one-coat rendering mortars with substrates

  • EN 1015-3:1999 Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table)

  • EN 1015-3:1999/A1:2004 Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table)

  • EN 1015-3:1999/A2:2006 Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table)

  • EN 1015-4:1998 Methods of test for mortar for masonry – Part 4: Determination of consistence of fresh mortar (by plunger penetration)

  • EN 1015-6:1998 Methods of test for mortar for masonry – Part 6: Determination of bulk density of fresh mortar

  • EN 1015-6:1998/A1:2006 Methods of test for mortar for masonry – Part 6: Determination of bulk density of fresh mortar

  • EN 1015-7:1998 Methods of test for mortar for masonry – Part 7: Determination of air content of fresh mortar

  • EN 1015-9:1999 Methods of test for mortar for masonry – Part 9: Determination of workable life and correction time of fresh mortar

  • EN 1015-9:1999/A1:2006 Methods of test for mortar for masonry – Part 9: Determination of workable life and correction time of fresh mortar

  • EN 1017:2008 Chemicals used for treatment of water intended for human consumption – Half-burnt dolomite

  • EN 1017:2008/AC:2009 Chemicals used for treatment of water intended for human consumption – Half-burnt dolomite

  • EN 1018:2013 Chemicals used for treatment of water intended for human consumption – Calcium carbonate

  • EN 1019:2005 Chemicals used for treatment of water intended for human consumption – Sulfur dioxide

  • EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products

  • EN 1021-1:2006 Furniture – Assessment of the ignitability of upholstered furniture – Part 1: Ignition source smouldering cigarette

  • EN 1021-2:2006 Furniture – Assessment of the ignitability of upholstered furniture – Part 2: Ignition source match flame equivalent

  • EN 1022:2005 Domestic furniture – Seating – Determination of stability

  • EN 10222-1:1998 Steel forgings for pressure purposes – Part 1: General requirements for open die forgings

  • EN 10222-1:1998/A1:2002 Steel forgings for pressure purposes – Part 1 : General requirements for open die forgings

  • EN 10223-5:2012 Steel wire and wire products for fencing and netting – Part 5: Steel wire woven hinged joint and knotted mesh fencing

  • EN 1023-1:1996 Office furniture – Screens – Part 1: Dimensions

  • EN 1023-2:2000 Office furniture – Screens – Part 2: Mechanical safety requirements

  • EN 1023-3:2000 Office furniture – Screens – Part 3: Test methods

  • EN 1024:2012 Clay roofing tiles for discontinuous laying – Determination of geometric characteristics

  • EN 10250-1:1999 Open die steel forgings for general engineering purposes – Part 1: General requirements

  • EN 10250-2:1999 Open die steel forgings for general engineering purposes – Part 2: Non-alloy quality and special steels

  • EN 10250-3:1999 Open die steel forgings for general engineering purposes – Part 3: Alloy special steels

  • EN 10250-4:1999 Open die steel forgings for general engineering purposes – Part 4: Stainless steels

  • EN 1026:2000 Windows and doors – Air permeability – Test method

  • EN 1027:2000 Windows and doors – Watertightness – Test method

  • EN 10276-1:2000 Chemical analysis of ferrous materials – Determination of oxygen in steel and iron – Part 1: Sampling and preparation of steel samples for oxygen determination

  • EN 10276-2:2003 Chemical analysis of ferrous materials – Determination of oxygen content in steel and iron – Part 2: Infrared method after fusion under inert gas

  • EN 1028-1:2002+A1:2008 Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 1: Classification – General and safety requirements

  • EN 1028-2:2002+A1:2008 Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 2: Verification of general and safety requirements

  • EN 1034-1:2000+A1:2010 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 1: Common requirements

  • EN 1034-13:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 13: Machines for de-wiring bales and units

  • EN 1034-14:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 14: Reel splitter

  • EN 1034-16:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 16: Paper and board making machines

  • EN 1034-17:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 17: Tissue making machines

  • EN 1034-2:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 2: Barking drums

  • EN 1034-21:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 21: Coating machines

  • EN 1034-22:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 22: Wood Grinders

  • EN 1034-26:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 26: Roll packaging machines

  • EN 1034-27:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 27: Roll handling systems

  • EN 1034-3:2011 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Rereelers and winders

  • EN 1034-4:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities

  • EN 1034-5:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 5: Sheeters

  • EN 1034-6:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 6: Calender

  • EN 1034-7:2005+A1:2009 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 7: Chests

  • EN 1034-8:2012 Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 8: Refining plants

  • EN 1035:1998 Tannery machines – Moving platen machinery – Safety requirements

  • EN 1035:1998/AC:2002 Tannery machines – Moving platen machinery – Safety requirements

  • EN 1036-1:2007 Glass in building – Mirrors from silver-coated float glass for internal use – Part 1: Definitions, requirements and test methods

  • EN 1036-2:2008 Glass in building – Mirrors from silver-coated float glass for internal use – Part 2: Evaluation of conformity; product standard

  • EN 1037:1995+A1:2008 Safety of machinery – Prevention of unexpected start-up

  • EN 1038:1995 Identification card systems – Telecommunication applications – Integrated circuit(s) card payphone

  • EN 1040:2005 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics – Test method and requirements (phase 1)

  • EN 1045:1997 Brazing – Fluxes for brazing – Classification and technical delivery conditions

  • EN 1048:1998 Heat exchangers – Air-cooled liquid coolers “dry coolers” – Test procedure for establishing the performance

  • EN 1049-2:1993 Textiles – Woven fabrics – Construction – Methods of analysis – Part 2: Determination of number of threads per unit length (ISO 7211-2:1984 modified)

  • EN 1051-1:2003 Glass in building – Glass blocks and glass pavers – Part 1: Definitions and description

  • EN 1051-2:2007 Glass in building – Glass blocks and glass pavers – Part 2: Evaluation of conformity/Product standard

  • EN 1052-1:1998 Methods of test for masonry – Part 1: Determination of compressive strength

  • EN 1052-2:1999 Methods of test for masonry – Part 2: Determination of flexural strength

  • EN 1052-3:2002 Methods of test for masonry – Part 3: Determination of initial shear strength

  • EN 1052-3:2002/A1:2007 Methods of test for masonry – Part 3: Determination of initial shear strength

  • EN 1052-4:2000 Methods of test for masonry – Part 4: Determination of shear strength including damp proof course

  • EN 1052-5:2005 Methods of test for masonry – Part 5: Determination of bond strength by the bond wrench method

  • EN 1053:1995 Plastics piping systems – Thermoplastics piping systems for non-pressure applications – Test method for watertightness

  • EN 1054:1995 Plastics piping systems – Thermoplastics piping systems for soil and waste discharge – Test method for airtightness of joints

  • EN 1055:1996 Plastics piping systems – Thermoplastics piping systems for soil and waste discharge inside buildings – Test method for resistance to elevated temperature cycling

  • EN 1057:2006+A1:2010 Copper and copper alloys – Seamless, round copper tubes for water and gas in sanitary and heating applications

  • EN 1058:2009 Wood-based panels – Determination of characteristic 5-percentile values and characteristic mean values

  • EN 1060-3:1997+A2:2009 Non-invasive sphygmomanometers – Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems

  • EN 1060-4:2004 Non-invasive sphygmomanometers – Part 4: Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers

  • EN 1062-1:2004 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 1: Classification

  • EN 1062-11:2002 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 11: Methods of conditioning before testing

  • EN 1062-11:2002/AC:2005 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 11: Methods of conditioning before testing

  • EN 1062-3:2008 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 3: Determination of liquid water permeability

  • EN 1062-6:2002 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 6: Determination of carbon dioxide permeability

  • EN 1062-7:2004 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 7: Determination of crack bridging properties

  • EN 1063:1999 Glass in building – Security glazing – Testing and classification of resistance against bullet attack

  • EN 1065:1998 Adjustable telescopic steel props – Product specifications, design and assessment by calculation and tests

  • EN 1067:2005 Adhesives – Examination and preparation of samples for testing

  • EN 1069-1:2010 Water slides – Part 1: Safety requirements and test methods

  • EN 1069-1:2010/AC:2012 Water slides – Part 1: Safety requirements and test methods

  • EN 1069-2:2010 Water slides – Part 2: Instructions

  • EN 107:1980 Methods of testing windows – Mechanical test

  • EN 1071-1:2003 Advanced technical ceramics – Methods of test for ceramic coatings – Part 1: Determination of coating thickness by contact probe filometer

  • EN 1071-10:2009 Advanced technical ceramics – Methods of test for ceramic coatings – Part 10: Determination of coating thickness by cross sectioning

  • EN 1071-12:2010 Advanced technical ceramics – Methods of test for ceramic coatings – Part 12: Reciprocating wear test

  • EN 1071-13:2010 Advanced technical ceramics – Methods of test for ceramic coatings – Part 13: Determination of wear rate by the pin-on-disk method

  • EN 1071-2:2002 Advanced technical ceramics – Methods of test for ceramic coatings – Part 2: Determination of coating thickness by the crater grinding method

  • EN 1071-3:2005 Advanced technical ceramics – Methods of test for ceramic coatings – Part 3: Determination of adhesion and other mechanical failure modes by a scratch test

  • EN 1071-4:2006 Advanced technical ceramics – Methods of test for ceramic coatings – Part 4: Determination of chemical composition by electron probe microanalysis (EPMA)

  • EN 1071-6:2007 Advanced technical ceramics – Methods of test for ceramic coatings – Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test

  • EN 1071-9:2009 Advanced technical ceramics – Methods of test for ceramic coatings – Part 9: Determination of fracture strain

  • EN 1073-1:1998 Protective clothing against radioactive contamination – Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination

  • EN 1073-2:2002 Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination

  • EN 1074-1:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 1: General requirements

  • EN 1074-2:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 2: Isolating valves

  • EN 1074-2:2000/A1:2004 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 2: Isolating valves

  • EN 1074-3:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 3: Check valves

  • EN 1074-4:2000 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 4: Air valves

  • EN 1074-5:2001 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 5: Control valves

  • EN 1074-6:2008 Valves for water supply – Fitness for purpose requirements and appropriate verification tests – Part 6: Hydrants

  • EN 1075:1999 Timber structures – Test methods – Joints made with punched metal plate fasteners

  • EN 1076:2009 Workplace exposure – Procedures for measuring gases and vapours using pumped samplers – Requirements and test methods

  • EN 1077:2007 Helmets for alpine skiers and snowboarders

  • EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates

  • EN 1080:2013 Impact protection helmets for young children

  • EN 1081:1998 Resilient floor coverings – Determination of the electrical resistance

  • EN 1082-1:1996 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards

  • EN 1082-2:2000 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail

  • EN 1082-3:2000 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 3: Impact cut test for fabric, leather and other materials

  • EN 1083-1:1997 Power-driven brushes – Part 1: Definitions and nomenclature

  • EN 1083-2:1997 Power-driven brushes – Part 2: Safety requirements

  • EN 1085:2007 Wastewater treatment – Vocabulary

  • EN 1086:1995 Sacks for the transport of food aid – Recommendations on the selection of type of sack and the liner in relation to the product to be packed

  • EN 1087-1:1995 Particleboards – Determination of moisture resistance – Part 1: Boil test

  • EN 1089-3:2011 Transportable gas cylinders – Gas cylinder identification (excluding LPG) – Part 3: Colour coding

  • EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components

  • EN 1090-2:2008+A1:2011 Execution of steel structures and aluminium structures – Part 2: Technical requirements for steel structures

  • EN 1090-3:2008 Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures

  • EN 1091:1996 Vacuum sewerage systems outside buildings

  • EN 1092-1:2007+A1:2013 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 1: Steel flanges

  • EN 1092-2:1997 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 2: Cast iron flanges

  • EN 1092-3:2003 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges

  • EN 1092-3:2003/AC:2007 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges

  • EN 1092-4:2002 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges

  • EN 1093-1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 1: Selection of test methods

  • EN 1093-11:2001+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 11: Decontamination index

  • EN 1093-2:2006+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

  • EN 1093-3:2006+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 3: Test bench method for the measurement of the emission rate of a given pollutant

  • EN 1093-4:1996+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 4: Capture efficiency of an exhaust system – Tracer method

  • EN 1093-6:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 6: Separation efficiency by mass, unducted outlet

  • EN 1093-7:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet

  • EN 1093-8:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 8: Pollutant concentration parameter, test bench method

  • EN 1093-9:1998+A1:2008 Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 9: Pollutant concentration parameter, room method

  • EN 1094-1:2008 Insulating refractory products – Part 1: Terminology, classification and methods of test for high temperature insulation wool products

  • EN 1094-2:1998 Insulating refractory products – Part 2: Classification of shaped products (ISO 2245:1990 modified)

  • EN 1094-4:1995 Insulating refractory products – Part 4: Determination of bulk density and true porosity

  • EN 1094-6:1998 Insulating refractory products – Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987 modified)

  • EN 1096-1:2012 Glass in building – Coated glass – Part 1: Definitions and classification

  • EN 1096-2:2012 Glass in building – Coated glass – Part 2: Requirements and test methods for class A, B and S coatings

  • EN 1096-3:2012 Glass in building – Coated glass – Part 3: Requirements and test methods for class C and D coatings

  • EN 1096-4:2004 Glass in building – Coated glass – Part 4: Evaluation of conformity/Product standard

  • EN 1097-1:2011 Tests for mechanical and physical properties of aggregates – Part 1: Determination of the resistance to wear (micro-Deval)

  • EN 1097-10:2002 Tests for mechanical and physical properties of aggregates – Part 10: Determination of water suction height

  • EN 1097-11:2013 Tests for mechanical and physical properties of aggregates – Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates

  • EN 1097-2:2010 Tests for mechanical and physical properties of aggregates – Part 2: Methods for the determination of resistance to fragmentation

  • EN 1097-3:1998 Tests for mechanical and physical properties of aggregates – Part 3: Determination of loose bulk density and voids

  • EN 1097-4:2008 Tests for mechanical and physical properties of aggregates – Part 4: Determination of the voids of dry compacted filler

  • EN 1097-5:2008 Tests for mechanical and physical properties of aggregates – Part 5: Determination of the water content by drying in a ventilated oven

  • EN 1097-6:2013 Tests for mechanical and physical properties of aggregates – Part 6: Determination of particle density and water absorption

  • EN 1097-7:2008 Tests for mechanical and physical properties of aggregates – Part 7: Determination of the particle density of filler – Pyknometer method

  • EN 1097-8:2009 Tests for mechanical and physical properties of aggregates – Part 8: Determination of the polished stone value

  • EN 1097-9:1998 Tests for mechanical and physical properties of aggregate – Part 9: Determination of the resistance to wear by abrasion from studded tyres – Nordic test

  • EN 1097-9:1998/A1:2005 Tests for mechanical and physical properties of aggregates – Part 9: Determination of the resistance to wear by abrasion from studded tyres – Nordic test

  • EN 1106:2010 Manually operated taps for gas burning appliances

  • EN 1107-1:1999 Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of dimensional stability

  • EN 1117:1998 Heat exchangers – Liquid cooled refrigerant condensers – Test procedures for establishing the performance

  • EN 1117:1998/A1:2002 Heat exchangers – Liquid cooled refrigerant condensors – Test procedures for establishing the performance

  • EN 1118:1998 Heat exchangers – Refrigerant cooled liquid coolers – Test procedures for establishing the performance

  • EN 1118:1998/A1:2002 Heat exchangers – Refrigerant cooled liquid coolers – Test pocedure for establishing the performance

  • EN 1121:2000 Doors – Behaviour between two different climates – Test method

  • EN 1128:1995 Cement-bonded particleboards – Determination of hard body impact resistance

  • EN 113:1996 Wood preservatives – Test method for determining the protective effectiveness against wood destroying basidiomycetes – Determination of the toxic values

  • EN 113:1996/A1:2004 Wood preservatives – Test method for determining the protective effectiveness against wood destroying basidiomycetes – Determination of the toxic values

  • EN 1148:1998 Heat exchangers – Water to water heat exchangers for district heating – Test procedures for establishing the performance data

  • EN 1148:1998/A1:2005 Heat exchangers – Water to water heat exchangers for district heating – Test procedures for establishing the performance data

  • EN 115-1:2008+A1:2010 Safety of escalators and moving walks – Part 1: Construction and installation

  • EN 115-2:2010 Safety of escalators and moving walks – Part 2: Rules for the improvement of safety of existing escalators and moving walks

  • EN 1154:1996 Building hardware – Controlled door closing devices – Requirements and test methods

  • EN 1154:1996/A1:2002 Buiding hardware – Controlled door closing devices – Requirements and test methods

  • EN 1154:1996/A1:2002/AC:2006 Building hardware – Controlled door closing devices – Requirements and test methods

  • EN 1155:1997 Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods

  • EN 1155:1997/A1:2002 Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods

  • EN 1155:1997/A1:2002/AC:2006 Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods

  • EN 1158:1997 Building hardware – Door coordinator devices – Requirements and test methods

  • EN 1158:1997/A1:2002 Building hardware – Door cordinator devices – Requirements and test methods

  • EN 1158:1997/A1:2002/AC:2006 Building hardware – Door coordinator devices – Requirements and test methods

  • EN 116:1997 Diesel and domestic heating fuels – Determination of cold filter plugging point

  • EN 116:1997/AC:1999 Diesel and domestic heating fuels – Determination of cold filter plugging point

  • EN 1170-7:1997 Precast concrete products – Test method for glass-fibre reinforced cement – Part 7: Measurement of extremes of dimensional variations due to moisture content

  • EN 1170-8:2008 Test method for glass-fibre reinforced cement – Part 8: Cyclic weathering type test

  • EN 1176-10:2008 Playground equipment and surfacing – Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment

  • EN 1176-7:2008 Playground equipment and surfacing – Part 7: Guidance on installation, inspection, maintenance and operation

  • EN 1186-10:2002 Materials and articles in contact with foodstuffs – Plastics – Part 10: Test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil occurs)

  • EN 1186-7:2002 Materials and articles in contact with foodstuffs – Plastics – Part 7: Test methods for overall migration into aqueous food simulants using a pouch

  • EN 1186-8:2002 Materials and articles in contact with foodstuffs – Plastics – Part 8: Test methods for overall migration into olive oil by article filling

  • EN 1186-9:2002 Materials and articles in contact with foodstuffs – Plastics – Part 9: Test methods for overall migration into aqueous food simulants by article filling

  • EN 1192:1999 Doors – Classification of strength requirements

  • EN 1195:1997 Timber structures – Test methods – Performance of structural floor decking

  • EN 120:1992 Wood based panels – Determination of formaldehyde content – Extraction method called the perforator method

  • EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar – Safety requirements

  • EN 12002:2008 Adhesives for tiles – Determination of transverse deformation for cementitious adhesives and grouts

  • EN 12003:2008 Adhesive for tiles – Determination of shear adhesion strength of reaction resin adhesives

  • EN 12003:2008/AC:2009 Adhesive for tiles – Determination of shear adhesion strength of reaction resin adhesives

  • EN 12004:2007+A1:2012 Adhesives for tiles – Requirements, evaluation of conformity, classification and designation

  • EN 12012-1:2007+A1:2008 Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators

  • EN 12012-3:2001+A1:2008 Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders

  • EN 12012-4:2006+A1:2008 Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators

  • EN 12013:2000+A1:2008 Plastics and rubber machines – Internal mixers – Safety requirements

  • EN 12014-7:1998 Foodstuffs – Determination of nitrate and/or nitrite content – Part 7: Continuous flow method for the determination of nitrate content of vegetables and vegetable products after Cadmium reduction

  • EN 12015:2004 Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Emission

  • EN 12016:2013 Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity

  • EN 12020-1:2008 Aluminium and aluminium alloys – Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 – Part 1: Technical conditions for inspection and delivery

  • EN 12020-2:2008 Aluminium and aluminium alloys – Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 – Part 2: Tolerances on dimensions and form

  • EN 12021:1998 Respiratory protective devices – Compressed air for breathing apparatus

  • EN 12041:2000+A1:2009 Food processing machinery – Moulders – Safety and hygiene requirements

  • EN 12042:2005+A1:2010 Food processing machinery – Automatic dividers – Safety and hygiene requirements

  • EN 12043:2000+A1:2010 Food processing machinery – Intermediate provers – Safety and hygiene requirements

  • EN 12045:2000 Shutters and blinds power operated – Safety in use – Measurement of the transmitted force

  • EN 12046-1:2003 Operating forces – Test method – Part 1: Windows

  • EN 12046-2:2000 Operating forces – Test method – Part 2: Doors

  • EN 12051:1999 Building hardware – Door and window bolts – Requirements and test methods

  • EN 12053:2001+A1:2008 Safety of industrial trucks – Test methods for measuring noise emissions

  • EN 12061:1999 Plastics piping systems – Thermoplastics fittings – Test method for impact resistance

  • EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances – Part 2: Electronic types

  • EN 12074:2000 Welding consumables – Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes

  • EN 12077-2:1998+A1:2008 Cranes safety – Requirements for health and safety – Part 2: Limiting and indicating devices

  • EN 12083:1998 Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking

  • EN 12083:1998/AC:2000 Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking

  • EN 12085:2013 Thermal insulating products for building applications – Determination of linear dimensions of test specimens

  • EN 12086:2013 Thermal insulating products for building applications – Determination of water vapour transmission properties

  • EN 12087:2013 Thermal insulating products for building applications – Determination of long term water absorption by immersion

  • EN 12088:2013 Thermal insulating products for building applications – Determination of long term water absorption by diffusion

  • EN 12089:2013 Thermal insulating products for building applications – Determination of bending behaviour

  • EN 12090:2013 Thermal insulating products for building applications – Determination of shear behaviour

  • EN 12091:2013 Thermal insulating products for building applications – Determination of freeze-thaw resistance

  • EN 12094-10:2003 Fixed firefighting systems – Components for gas extinguishing systems – Part 10: Requirements and test methods for pressure gauges and pressure switches

  • EN 12094-16:2003 Fixed firefighting systems – Components for gas extinguishing systems – Part 16: Requirements and test methods for odorizing devices for CO2 low pressure systems

  • EN 12094-7:2000 Fixed firefighting systems – Components for gas extinguishing systems – Part 7: Requirements and test methods for nozzles for CO2 systems

  • EN 12094-7:2000/A1:2005 Fixed firefighting systems – Components for gas extinguishing systems – Part 7: Requirements and test methods for nozzles for CO2 systems

  • EN 12094-8:2006 Fixed firefighting systems – Components for gas extinguishing systems – Part 8: Requirements and test methods for connectors

  • EN 12094-9:2003 Fixed firefighting systems – Components for gas extinguishing systems – Part 9: Requirements and test methods for special fire detectors

  • EN 12095:1997 Plastics piping systems – Brackets for rainwater piping systems – Test method for bracket strength

  • EN 12099:1997 Plastics piping systems – Polyethylene piping materials and components – Determination of volatile content

  • EN 12101-10:2005 Smoke and heat control systems – Part 10: Power supplies

  • EN 12101-10:2005/AC:2007 Smoke and heat control systems – Part 10: Power supplies

  • EN 12101-7:2011 Smoke and heat control systems – Part 7: Smoke duct sections

  • EN 12101-8:2011 Smoke and heat control systems – Part 8: Smoke control dampers

  • EN 12102:2013 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling – Measurement of airborne noise – Determination of the sound power level

  • EN 12103:1999 Resilient floor coverings – Agglomerated cork underlays – Specification

  • EN 12104:2000 Resilient floor coverings – Cork floor tiles – Specification

  • EN 12105:1998 Resilient floor coverings – Determination of moisture content of agglomerated composition cork

  • EN 12106:1997 Plastics piping systems – Polyethylene (PE) pipes – Test method for the resistance to internal pressure after application of squeeze-off

  • EN 12110:2002+A1:2008 Tunnelling machines – Air locks – Safety requirements

  • EN 12111:2002+A1:2009 Tunnelling machines – Road headers, continuous miners and impact rippers – Safety requirements

  • EN 12114:2000 Thermal performance of buildings – Air permeability of building components and building elements – Laboratory test method

  • EN 12117:1997 Plastics piping systems – Fittings, valves and ancillaries – Determination of gaseous flow rate/pressure drop relationships

  • EN 12149:1997 Wallcoverings in roll form – Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release

  • EN 12150-1:2000 Glass in building – Thermally toughened soda lime silicate safety glass – Part 1: Definition and description

  • EN 12150-2:2004 Glass in building – Thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard

  • EN 12151:2007 Machinery and plants for the preparation of concrete and mortar – Safety requirements

  • EN 12152:2002 Curtain walling – Air permeability – Performance requirements and classification

  • EN 12153:2000 Curtain walling – Air permeability – Test method

  • EN 12154:1999 Curtain walling – Watertightness – Performance requirements and classification

  • EN 12155:2000 Curtain walling – Watertightness – Laboratory test under static pressure

  • EN 12158-1:2000+A1:2010 Builders’ hoists for goods – Part 1: Hoists with accessible platforms

  • EN 12158-2:2000+A1:2010 Builders’ hoists for goods – Part 2: Inclined hoists with non-accessible load carrying devices

  • EN 12159:2012 Builders hoists for persons and materials with vertically guided cages

  • EN 1216:1998 Heat exchangers – Forced circulation air-cooling and air-heating coils – Test procedures for establishing the performance

  • EN 1216:1998/A1:2002 Heat exchangers – Forced circulation air-cooling and air-heating coils – Test procedures for establishing the performance

  • EN 12163:2011 Copper and copper alloys – Rod for general purposes

  • EN 12164:2011 Copper and copper alloys – Rod for free machining purposes

  • EN 12165:2011 Copper and copper alloys – Wrought and unwrought forging stock

  • EN 12166:2011 Copper and copper alloys – Wire for general purposes

  • EN 12167:2011 Copper and copper alloys – Profiles and bars for general purposes

  • EN 12168:2011 Copper and copper alloys – Hollow rod for free machining purposes

  • EN 12177:1998 Liquid petroleum products – Unleaded petrol – Determination of benzene content by gas chromatography

  • EN 12177:1998/AC:2000 Liquid petroleum products – Unleaded petrol – Determination of benzene content by gas chromatography

  • EN 12179:2000 Curtain walling – Resistance to wind load – Test method

  • EN 1218-1:1999+A1:2009 Safety of woodworking machines – Tenoning machines – Part 1: Single end tenoning machines with sliding table

  • EN 1218-2:2004+A1:2009 Safety of woodworking machines – Tenoning machines – Part 2: Double end tenoning and/or profiling machines fed by chain or chains

  • EN 1218-3:2001+A1:2009 Safety of woodworking machines – Tenoning machines – Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

  • EN 1218-4:2004+A2:2009 Safety of woodworking machines – Tenoning machines – Part 4: Edge banding machines fed by chain(s)

  • EN 1218-5:2004+A1:2009 Safety of woodworking machines – Tenoning machines – Part 5: One side profiling machines with fixed table and feed rollers or feed chain

  • EN 12188:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of adhesion steel-to-steel for characterisation of structural bonding agents

  • EN 12189:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of open time

  • EN 12190:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of compressive strength of repair mortar

  • EN 12192-1:2002 Products and systems for the protection and repair of concrete structures – Granulometry analysis – Part 1: Test method for dry components of premixed mortar

  • EN 12192-2:1999 Products and systems for the protection and repair of concrete structures – Granulometry analysis – Part 2: Test method for fillers for polymer bonding agents

  • EN 12194:2000 Shutters, external and internal blinds – Misuse – Test methods

  • EN 12196:2003 Gymnastic equipment – Horses and bucks – Functional and safety requirements, test methods

  • EN 12197:1997 Gymnastic equipment – Horizontal bars – Safety requirements and test methods

  • EN 12198-1:2000+A1:2008 Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 1: General principles

  • EN 12198-2:2002+A1:2008 Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 2: Radiation emission measurement procedure

  • EN 12198-3:2002+A1:2008 Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 3: Reduction of radiation by attenuation or screening

  • EN 12199:2010 Resilient floor coverings – Specifications for homogeneous and heterogeneous relief rubber floor coverings

  • EN 12200-1:2000 Plastics rainwater piping systems for above ground external use – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for pipes, fittings and the system

  • EN 12205:2001 Transportable gas cylinders – Non-refillable metallic gas cylinders

  • EN 12206-1:2004 Paints and varnishes – Coating of aluminium and aluminium alloys for architectural purposes – Part 1: Coatings prepared from coating powder

  • EN 12207:1999 Windows and doors – Air permeability – Classification

  • EN 12208:1999 Windows and doors – Watertightness – Classification

  • EN 12209:2003 Building hardware – Locks and latches – Mechanically operated locks, latches and locking plates – Requirements and test methods

  • EN 12209:2003/AC:2005 Building hardware – Locks and latches – Mechanically operated locks, latches and locking plates – Requirements and test methods

  • EN 12210:1999 Windows and doors – Resistance to wind load – Classification

  • EN 12210:1999/AC:2002 Windows and doors – Resistance to wind load – Classification

  • EN 12211:2000 Windows and doors – Resistance to wind load – Test method

  • EN 12216:2002 Shutters, external blinds, internal blinds – Terminology, glossary and definitions

  • EN 12217:2003 Doors – Operating forces – Requirements and classification

  • EN 12219:1999 Doors – Climatic influences – Requirements and classification

  • EN 12245:2009+A1:2011 Transportable gas cylinders – Fully wrapped composite cylinders

  • EN 12254:2010 Screens for laser working places – Safety requirements and testing

  • EN 12254:2010/AC:2011 Screens for laser working places – Safety requirements and testing

  • EN 12255-10:2000 Wastewater treatment plants – Part 10: Safety principles

  • EN 12255-15:2003 Wastewater treatment plants – Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants

  • EN 12255-16:2005 Wastewater treatment plants – Part 16: Physical (mechanical) filtration

  • EN 12255-7:2002 Wastewater treatment plants – Part 7: Biological fixed-film reactors

  • EN 12255-8:2001 Wastewater treatment plants – Part 8: Sludge treatment and storage

  • EN 12255-9:2002 Wastewater treatment plants – Part 9: Odour control and ventilation

  • EN 12256:1998 Plastics piping systems – Thermoplastics fittings – Test method for mechanical strength or flexibility of fabricated fittings

  • EN 12257:2002 Transportable gas cylinders – Seamless, hoop-wrapped composite cylinders

  • EN 12258-1:2012 Aluminium and aluminium alloys – Terms and definitions – Part 1: General terms

  • EN 12258-2:2004 Aluminium and aluminium alloys – Terms and definitions – Part 2: Chemical analysis

  • EN 12258-3:2003 Aluminium and aluminium alloys – Terms and definitions – Part 3: Scrap

  • EN 12258-4:2004 Aluminium and aluminium alloys – Terms and definitions – Part 4: Residues of the aluminium industry

  • EN 12266-1:2012 Industrial valves – Testing of metallic valves – Part 1: Pressure tests, test procedures and acceptance criteria – Mandatory requirements

  • EN 12266-2:2012 Industrial valves – Testing of metallic valves – Part 2: Tests, test procedures and acceptance criteria – Supplementary requirements

  • EN 12267:2003+A1:2010 Food processing machinery – Circular saw machines – Safety and hygiene requirements

  • EN 12268:2003+A1:2010 Food processing machinery – Band saw machines – Safety and hygiene requirements

  • EN 12269-1:2000 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the “beam test” – Part 1: Short term test

  • EN 12269-2:2010 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test – Part 2: Long term test

  • EN 12270:1998 Mountaineering equipment – Chocks – Safety requirements and test methods

  • EN 12274-7:2005 Slurry surfacing – Test methods – Part 7: Shaking abrasion test

  • EN 12274-8:2005 Slurry surfacing – Test methods – Part 8: Visual assessment of defects

  • EN 12275:2013 Mountaineering equipment – Connectors – Safety requirements and test methods

  • EN 12276:1998 Mountaineering equipment – Frictional anchors – Safety requirements and test methods

  • EN 12276:1998/AC:2000 Mountaineering equipment – Frictional anchors – Safety requirements and test methods

  • EN 12277:2007 Mountaineering equipment – Harnesses – Safety requirements and test methods

  • EN 12278:2007 Montaineering equipment – Pulleys – Safety requirements and test methods

  • EN 1228:1996 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of initial specific ring stiffness

  • EN 12288:2010 Industrial valves – Copper alloy gate valves

  • EN 1229:1996 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Test methods to prove the leaktightness of the wall under short-term internal pressure

  • EN 12301:2000+A1:2008 Plastics and rubber machines – Calenders – Safety requirements

  • EN 1231:1996 Workplace atmospheres – Short term detector tube measurement systems – Requirements and test methods

  • EN 12310-1:1999 Flexible sheets for waterproofing – Part 1: Bitumen sheets for waterproofing – Determination of resistance to tearing (nail shank)

  • EN 12311-1:1999 Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of tensile properties

  • EN 12312-16:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 16: Air start equipment

  • EN 12312-17:2004+A1:2009 Aircraft ground support equipment – Specific requirements – Part 17: Air conditioning equipment

  • EN 12312-18:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 18: Nitrogen or Oxygen units

  • EN 12312-7:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 7: Air-craft movement equipment

  • EN 12312-8:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms

  • EN 12316-1:1999 Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of peel resistance of joints

  • EN 12317-1:1999 Flexible sheets for waterproofing – Part 1: Bitumen sheets for roof waterproofing – Determination of shear resistance of joints

  • EN 12320:2012 Building hardware – Padlocks and padlock fittings – Requirements and test methods

  • EN 12322:1999 In vitro diagnostic medical devices – Culture media for microbiology – Performance criteria for culture media

  • EN 12322:1999/A1:2001 In vitro diagnostic medical devices – Culture media for microbiology – Performance criteria for culture media

  • EN 12326-1:2004 Slate and stone products for discontinuous roofing and cladding – Part 1: Product specification

  • EN 12326-2:2011 Slate and stone for discontinuous roofing and external cladding – Part 2: Methods of test for slate and carbonate slate

  • EN 12331:2003+A2:2010 Food processing machinery – Mincing machines – Safety and hygiene requirements

  • EN 12334:2001 Industrial valves – Cast iron check valves

  • EN 12334:2001/A1:2004 Industrial valves – Cast iron check valves

  • EN 12334:2001/AC:2002 Industrial valves – Cast iron check valves

  • EN 12336:2005+A1:2008 Tunnelling machines – Shield machines, thrust boring machines, auger boring machines, lining erection equipment – Safety requirements

  • EN 12337-1:2000 Glass in building – Chemically strengthened soda lime silicate glass – Part 1: Definition and description

  • EN 12337-2:2004 Glass in building – Chemically strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard

  • EN 12339:1997 Inland navigation vessels – Rope tubs

  • EN 12346:1998 Gymnastic equipment – Wall bars, lattice ladders and climbing frames – Safety requirements and test methods

  • EN 12348:2000+A1:2009 Core drilling machines on stand – Safety

  • EN 12350-1:2009 Testing fresh concrete – Part 1: Sampling

  • EN 12350-10:2010 Testing fresh concrete – Part 10: Self-compacting concrete – L box test

  • EN 12350-11:2010 Testing fresh concrete – Part 11: Self-compacting concrete – Sieve segregation test

  • EN 12350-12:2010 Testing fresh concrete – Part 12: Self-compacting concrete – J-ring test

  • EN 12350-2:2009 Testing fresh concrete – Part 2: Slump-test

  • EN 12350-3:2009 Testing fresh concrete – Part 3: Vebe test

  • EN 12350-4:2009 Testing fresh concrete – Part 4: Degree of compactability

  • EN 12350-5:2009 Testing fresh concrete – Part 5: Flow table test

  • EN 12350-6:2009 Testing fresh concrete – Part 6: Density

  • EN 12350-7:2009 Testing fresh concrete – Part 7: Air content – Pressure methods

  • EN 12350-8:2010 Testing fresh concrete – Part 8: Self-compacting concrete – Slump-flow test

  • EN 12350-9:2010 Testing fresh concrete – Part 9: Self-compacting concrete – V-funnel test

  • EN 12351:2010 Industrial valves – Protective caps for valves with flanged connections

  • EN 12354-1:2000 Building Acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 1: Airborne sound insulation between rooms

  • EN 12354-2:2000 Building acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 2: Impact sound insulation between rooms

  • EN 12354-3:2000 Building acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 3: Airborne sound insulation against outdoor sound

  • EN 12354-4:2000 Building Acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 4: Transmission of indoor sound to the outside

  • EN 12354-5:2009 Building acoustics – Estimation of acoustic performance of building from the performance of elements – Part 5: Sounds levels due to the service equipment

  • EN 12354-5:2009/AC:2010 Building acoustics – Estimation of acoustic performance of building from the performance of elements – Part 5: Sounds levels due to the service equipment

  • EN 12354-6:2003 Building acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 6: Sound absorption in enclosed spaces

  • EN 12355:2003+A1:2010 Food processing machinery – Derinding-, skinning- and membrane removal machines – Safety and hygiene requirements

  • EN 12365-1:2003 Building hardware – Gasket and weatherstripping for doors, windows, shutters and curtain walling – Part 1: Performance requirements and classification

  • EN 12365-2:2003 Building hardware – Gasket and weatherstripping for doors, windows, shutters and curtain walling – Part 2: Linear compression force test methods

  • EN 12365-3:2003 Building hardware – Gasket and weatherstripping for doors, windows, shutters and curtain walling – Part 3: Deflection recovery test method

  • EN 12365-4:2003 Building hardware – Gasket and weatherstripping for doors, windows, shutters and curtain walling – Part 4: Recovery after accelerated ageing test method

  • EN 12369-1:2001 Wood-based panels – Characteristic values for structural design – Part 1: OSB, particleboards and fibreboards

  • EN 12369-2:2011 Wood-based panels – Characteristic values for structural design – Part 2: Plywood

  • EN 12369-3:2008 Wood-based panels – Characteristic values for structural design – Part 3: Solid-wood panels

  • EN 12384:1999 Copper and copper alloys – Determination of spring bending limit on strip

  • EN 12385-10:2003+A1:2008 Steel wire ropes – Safety – Part 10: Spiral ropes for general structural applications

  • EN 12385-7:2002 Steel wire ropes – Safety – Part 7: Locked coil ropes for mine shafts

  • EN 12385-8:2002 Steel wire ropes – Safety – Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons

  • EN 12385-9:2002 Steel wire ropes – Safety – Part 9: Locked coil carrying ropes for cableway installations designed to carry persons

  • EN 12390-1:2012 Testing hardened concrete – Part 1: Shape, dimensions and other requirements for specimens and moulds

  • EN 12390-13:2013 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression

  • EN 12390-2:2009 Testing hardened concrete – Part 2: Making and curing specimens for strength tests

  • EN 12390-3:2009 Testing hardened concrete – Part 3: Compressive strength of test specimens

  • EN 12390-3:2009/AC:2011 Testing hardened concrete – Part 3: Compressive strength of test specimens

  • EN 12390-4:2000 Testing hardened concrete – Part 4: Compressive strength – Specification for testing machines

  • EN 12390-5:2009 Testing hardened concrete – Part 5: Flexural strength of test specimens

  • EN 12390-6:2009 Testing hardened concrete – Part 6: Tensile splitting strength of test specimens

  • EN 12390-7:2009 Testing hardened concrete – Part 7: Density of hardened concrete

  • EN 12390-8:2009 Testing hardened concrete – Part 8: Depth of penetration of water under pressure

  • EN 12392:2000 Aluminium and aluminium alloys – Wrought products – Special requirements for products intended for the production of pressure equipment

  • EN 12400:2002 Windows and pedestrian doors – Mechanical durability – Requirements and classification

  • EN 12406:1999 Swap bodies – Thermal swap bodies of Class C – Dimensions and general requirements

  • EN 12409:2008+A1:2011 Plastics and rubber machines – Thermoforming machines – Safety requirements

  • EN 12410:1999 Swap bodies – Thermal swap bodies of Class A – Dimensions and general requirements

  • EN 12412-2:2003 Thermal performance of windows, doors and shutters – Determination of thermal transmittance by hot box method – Part 2: Frames

  • EN 12412-4:2003 Thermal performance of windows, doors and shutters – Determination of thermal transmittance by hot box method – Part 4: Roller shutter boxes

  • EN 12413:2007+A1:2011 Safety requirements for bonded abrasive products

  • EN 12417:2001+A2:2009 Machine tools – Safety – Machining centres

  • EN 12417:2001+A2:2009/AC:2010 Machine tools – Safety – Machining centres

  • EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site – Safety

  • EN 12420:1999 Copper and copper alloys – Forgings

  • EN 12424:2000 Industrial, commercial and garage doors and gates – Resistance to wind load – Classification

  • EN 12425:2000 Industrial, commercial and garage doors and gates – Resistance to water penetration – Classification

  • EN 12426:2000 Industrial, commercial and garage doors and gates – Air permeability – Classification

  • EN 12427:2000 Industrial, commercial and garage doors and gates – Air permeability – Test method

  • EN 12428:2013 Industrial, commercial and garage doors – Thermal transmittance – Requirements for the calculation

  • EN 12429:1998 Thermal insulating products for building applications – Conditioning to moisture equilibrium under specified temperature and humidity conditions

  • EN 12430:2013 Thermal insulating products for building applications – Determination of behaviour under point load

  • EN 12431:2013 Thermal insulating products for building applications – Determination of thickness for floating floor insulating products

  • EN 12432:1998 Gymnastic equipment – Balancing beams – Functional and safety requirements, test methods

  • EN 12433-1:1999 Industrial, commercial and garage doors and gates – Terminology – Part 1: Types of doors

  • EN 12433-2:1999 Industrial, commercial and garage doors and gates – Terminology – Part 2: Parts of doors

  • EN 12441-10:2004 Zinc and zinc alloys – Chemical analysis – Part 10: Determination of chromium and titanium in zinc alloys – Spectrophotometric method

  • EN 12441-7:2004 Zinc and zinc alloys – Chemical analysis – Part 7: Determination of tin – Flame atomic absorption spectrometric method after extraction

  • EN 12441-8:2004 Zinc and zinc alloys – Chemical analysis – Part 8: Determination of tin in secondary zinc – Flame atomic absorption spectrometric method

  • EN 12441-9:2004 Zinc and zinc alloys – Chemical analysis – Part 9: Determination of nickel in zinc alloys – Flame atomic absorption spectrometric method

  • EN 12444:2000 Industrial, commercial and garage doors and gates – Resistance to wind load – Testing and calculation

  • EN 12445:2000 Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Test methods

  • EN 12449:2012 Copper and copper alloys – Seamless, round tubes for general purposes

  • EN 12450:2012 Copper and copper alloys – Seamless, round copper capillary tubes

  • EN 12451:2012 Copper and copper alloys – Seamless, round tubes for heat exchangers

  • EN 12452:2012 Copper and copper alloys – Rolled, finned, seamless tubes for heat exchangers

  • EN 12453:2000 Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements

  • EN 12455:1999 Resilient floor coverings – Specification for corkment underlay

  • EN 12463:2004+A1:2011 Food processing machinery – Filling machines and auxiliary machines – Safety and hygiene requirements

  • EN 12466:1998 Resilient floor coverings – Vocabulary

  • EN 12467:2012 Fibre-cement flat sheets – Product specification and test methods

  • EN 12482-1:1998 Aluminium and aluminium alloys – Reroll stock for general applications – Part 1: Specifications for hot rolled reroll stock

  • EN 12482-2:1998 Aluminium and aluminium alloys – Reroll stock for general applications – Part 2: Specifications for cold rolled reroll stock

  • EN 12489:2000 Industrial, commercial and garage doors and gates – Resistance to water penetration – Test method

  • EN 12490:2010 Durability of wood and wood-based products – Preservative-treated solid wood – Determination of the penetration and retention of creosote in treated wood

  • EN 12491:2001 Paragliding equipment – Emergency parachutes – Safety requirements and test methods

  • EN 125:2010 Flame supervision devices for gas burning appliances – Thermoelectric flame supervision devices

  • EN 12503-1:2013 Sports mats – Part 1: Gymnastic mats, safety requirements

  • EN 12503-2:2001 Sports mats – Part 2: Pole vault and high jump mats, safety requirements

  • EN 12503-2:2001/AC:2002 Sports mats – Part 2: Pole vault and high jump mats, safety requirements

  • EN 12503-3:2001 Sports mats – Part 3: Judo mats, safety requirements

  • EN 12503-4:2013 Sports mats – Part 4: Determination of shock absorption

  • EN 12503-5:2001 Sports mats – Part 5: Determination of the base friction

  • EN 12503-6:2001 Sports mats – Part 6: Determination of the top friction

  • EN 12503-7:2001 Sports mats – Part 7: Determination of static stiffness

  • EN 12504-1:2009 Testing concrete in structures – Part 1: Cored specimens – Taking, examining and testing in compression

  • EN 12504-2:2012 Testing concrete in structures – Part 2: Non-destructive testing – Determination of rebound number

  • EN 12504-3:2005 Testing concrete in structures – Part 3: Determination of pull-out force

  • EN 12504-4:2004 Testing concrete – Part 4: Determination of ultrasonic pulse velocity

  • EN 12505:2000+A1:2009 Food processing machinery – Centrifugal machines for processing edible oils and fats – Safety and hygiene requirements

  • EN 12507:2005 Transportation services – Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries

  • EN 12512:2001 Timber structures – Test methods – Cyclic testing of joints made with mechanical fasteners

  • EN 12512:2001/A1:2005 Timber Structures – Test methods – Cyclic testing of joints made with mechanical fasteners

  • EN 12514-1:2000 Installations for oil supply systems for oil burners – Part 1: Safety requirements and tests – Parts, oil feed pumps, control and safety devices, supply tanks

  • EN 12514-2:2000 Installations for oil supply systems for oil burners – Part 2: Safety requirements and tests – Parts, valves, pipes, filters, oil de-aerators, meters

  • EN 12516-1:2005 Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells

  • EN 12516-1:2005/AC:2007 Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells

  • EN 12516-2:2004 Industrial valves – Shell design strength – Part 2: Calculation method for steel valve shells

  • EN 12516-3:2002 Valves – Shell design strength – Part 3: Experimental method

  • EN 12516-3:2002/AC:2003 Valves – Shell design strength – Part 3: Experimental method

  • EN 12516-4:2008 Industrial valves – Shell design strength – Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

  • EN 12519:2004 Windows and pedestrian doors – Terminology

  • EN 1252-2:2001 Cryogenic vessels – Materials – Part 2: Toughness requirements for temperatures between -80°C and -20°C

  • EN 12525:2000+A2:2010 Agricultural machinery – Front loaders – Safety

  • EN 12536:2000 Welding consumables – Rods for gas welding of non alloy and creep-resisting steels – Classification

  • EN 1254-1:1998 Copper and copper alloys – Plumbing fittings – Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes

  • EN 1254-2:1998 Copper and copper alloys – Plumbing fittings – Part 2: Fittings with compression ends for use with copper tubes

  • EN 1254-3:1998 Copper and copper alloys – Plumbing fittings – Part 3: Fittings with compression ends for use with plastics pipes

  • EN 12543-1:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 1: Scanning method

  • EN 12543-2:2008 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method

  • EN 12543-3:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 3: Slit camera radiographic method

  • EN 12543-4:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 4: Edge method

  • EN 12543-5:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes

  • EN 1254-4:1998 Copper and copper alloys – Plumbing fittings – Part 4: Fittings combining other end connections with capillary or compression ends

  • EN 1254-4:1998/AC:1999 Copper and copper alloys – Plumbing fittings – Part 4: Fittings combining other end connections with capillary or compression ends

  • EN 12544-1:1999 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 1: Voltage divider method

  • EN 12544-2:2000 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 2: Constancy check by the thick filter method

  • EN 12544-3:1999 Non-destructive testing – Measurement and evaluation of the X-ray tube voltage – Part 3: Spectrometric method

  • EN 1254-5:1998 Copper and copper alloys – Plumbing fittings – Part 5: Fittings with short ends for capillary brazing to copper tubes

  • EN 1254-6:2012 Copper and copper alloys – Plumbing fittings – Part 6: Fittings with push-fit ends

  • EN 1254-8:2012 Copper and copper alloys – Plumbing fittings – Part 8: Fittings with press ends for use with plastics and multilayer pipes

  • EN 1255:1995 Inland navigation vessels – Swing derricks

  • EN 1256:2006 Gas welding equipment – Specification for hose assemblies for equipment for welding, cutting and allied processes

  • EN 12560-1:2001 Flanges and their joints – Gaskets for Class-designated flanges – Part 1: Non-metallic flat gaskets with or without inserts

  • EN 12560-2:2013 Flanges and their joints – Dimensions of gaskets for Class-designated flanges – Part 2: Spiral wound gaskets for use with steel flanges

  • EN 12560-3:2001 Flanges and their joints – Gaskets for Class-designated flanges – Part 3: Non-metallic PTFE envelope gaskets

  • EN 12560-4:2001 Flanges and their joints – Gaskets for Class-designated flantes – Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges

  • EN 12560-5:2001 Flanges and their joints – Gaskets for Class-designated flanes – Part 5: Metallic ring joint gaskets for use with steel flanges

  • EN 12560-6:2003 Flanges and their joints – Gaskets for Class-designated flanges – Part 6: Covered serrated metal gaskets for use with steel flanges

  • EN 12560-7:2004 Flanges and their joints – Gaskets for Class-designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges

  • EN 12561-7:2011 Railway applications – Tank wagons – Part 7: Platforms and ladders

  • EN 12561-8:2011 Railway applications – Tank wagons – Part 8: Heating connections

  • EN 12566-7:2013 Small wastewater treatment systems for up to 50 PT – Part 7: Prefabricated tertiary treatment units

  • EN 12567:2000 Industrial valves – Isolating valves for LNG – Specification for suitability and appropriate verification tests

  • EN 12569:1999 Industrial valves – Valves for chemical and petrochemical process industry – Requirements and tests

  • EN 12569:1999/AC:2000 Industrial valves – Valves for chemical and petrochemical process industry – Requirements and tests

  • EN 12570:2000 Industrial valves – Method for sizing the operating element

  • EN 12572-1:2007 Artificial climbing structures – Part 1: Safety requirements and test methods for ACS with protection points

  • EN 12572-2:2008 Artificial climbing structures – Part 2: Safety requirements and test methods for bouldering walls

  • EN 12572-3:2008 Artificial climbing structures – Part 3: Safety requirements and test methods for climbing holds

  • EN 12584:1999 Imperfections in oxyfuel flame cuts, laser beams cuts and plasma cuts – Terminology

  • EN 126:2012 Multifunctional controls for gas burning appliances

  • EN 12600:2002 Glass in building – Pendulum test – Impact test method and classification for flat glass

  • EN 12603:2002 Glass in building – Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data

  • EN 12604:2000 Industrial, commercial and garage doors and gates – Mechanical aspects – Requirements

  • EN 12605:2000 Industrial, commercial and garage doors and gates – Mechanical aspects – Test methods

  • EN 12606-1:2007 Bitumen and bituminous binders – Determination of the paraffin wax content – Part 1: Method by distillation

  • EN 12606-2:1999 Bitumen and bituminous binders – Determination of the paraffin wax content – Part 2: Method of extraction

  • EN 12607-1:2007 Bitumen and bituminous binders – Determination of the resistance to hardening under the influence of heat and air – Part 1: RTFOT method

  • EN 12607-2:2007 Bitumen and bituminous binders – Determination of the resistance to hardening under the influence of heat and air – Part 2: TFOT Method.

  • EN 12607-3:2007 Bitumen and bituminous binders – Determination of the resistance to hardening under the influence of heat and air – Part 3: RFT Method

  • EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Classification, requirements and test methods

  • EN 12614:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of glass transition temperatures of polymers

  • EN 12615:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of slant shear strength

  • EN 12617-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)

  • EN 12617-2:2004 Products and systems for the protection and repair of concrete structures – Test methods – Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage

  • EN 12617-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Part 3: Determination of early age linear shrinkage for structural bonding agents

  • EN 12617-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Part 4: Determination of shrinkage and expansion

  • EN 12618-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Part 1: Adhesion and elongation capacity of injection products with limited ductility

  • EN 12618-2:2004 Products and systems for the protection and repair of concrete structures – Test methods – Part 2: Determination of the adhesion of injection products, with our without thermal cycling – Adhesion by tensile bond strength

  • EN 12618-3:2004 Products and systems for the protection and repair of concrete structures – Test methods – Part 3: Determination of the adhesion of injection products, with or without thermal cycling – Slant shear method

  • EN 12620:2013 Aggregates for concrete

  • EN 12622:2009+A1:2013 Safety of machine tools – Hydraulic press brakes

  • EN 12627:1999 Industrial valves – Butt welding ends for steel valves

  • EN 12628:1999 Diving accessories – Combined buoyancy and rescue devices – Functional and safety requirements, test methods

  • EN 12628:1999/AC:2000 Diving accessories – Combined buoyancy and rescue devices – Functional and safety requirements, test methods

  • EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 1: Common requirements

  • EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 2: Block making machines

  • EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 3: Slide and turntable machines

  • EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 4:Concrete roof tile making machines

  • EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis

  • EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis

  • EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines

  • EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines

  • EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

  • EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

  • EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

  • EN 1263-1:2002 Safety nets – Part 1: Safety requirements, test methods

  • EN 1263-2:2002 Safety nets – Part 2: Safety requirements for the positioning limits

  • EN 12634:1998 Petroleum products and lubricants – Determination of acid number – Non-aqueous potentiometric titration method

  • EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates – Installation and use

  • EN 12636:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of adhesion concrete to concrete

  • EN 12637-1:2004 Products and systems for the protection and repair of concrete structures – Test methods – Compatibility of injection products – Part 1: Compatibility with concrete

  • EN 12637-3:2003 Products and systems for the protection and repair of concrete structures – Test methods – Compatibility of injection products – Part 3: Effect of injection products on elastomers

  • EN 12640:2000 Securing of cargo on road vehicles – Lashing points on commercial vehicles for goods transportation – Minimum requirements and testing

  • EN 1264-1:2011 Water based surface embedded heating and cooling systems – Part 1: Definitions and symbols

  • EN 12641-1:2005 Swap bodies and commercial vehicles – Tarpaulins – Part 1: Minimum requirements

  • EN 12641-2:2006 Swap bodies and commercial vehicles – Tarpaulins – Part 2: Minimum requirements for curtainsiders

  • EN 12642:2006 Securing of cargo on road vehicles – Body structure of commercial vehicles – Minimum requirements

  • EN 1264-2:2008+A1:2012 Water based surface embedded heating and cooling systems – Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods

  • EN 12643:1997+A1:2008 Earth-moving machinery – Rubber-tyred machines – Steering requirements (ISO 5010:1992 modified)

  • EN 1264-3:2009 Water based surface embedded heating and cooling systems – Part 3: Dimensioning

  • EN 1264-4:2009 Water based surface embedded heating and cooling systems – Part 4: Installation

  • EN 12644-1:2001+A1:2008 Cranes – Information for use and testing – Part 1: Instructions

  • EN 12644-2:2000+A1:2008 Cranes – Information for use and testing – Part 2: Marking

  • EN 12645:1998 Pressure gauges – Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles – Metrology, requirements and testing

  • EN 1264-5:2008 Water based surface embedded heating and cooling systems – Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls – Determination of the thermal output

  • EN 12649:2008+A1:2011 Concrete compactors and smoothing machines – Safety

  • EN 12655:1998 Gymnastic equipment – Hanging rings – Functional and safety requirements, test methods

  • EN 1266:2002 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases

  • EN 1266:2002/A1:2005 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases

  • EN 12662:2008 Liquid petroleum products – Determination of contamination in middle distillates

  • EN 12664:2001 Thermal performance of building materials and products – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Dry and moist products of medium and low thermal resistance

  • EN 12667:2001 Thermal performance of building materials and products – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Products of high and medium thermal resistance

  • EN 12668-1:2010 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 1: Instruments

  • EN 12668-2:2010 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 2: Probes

  • EN 12668-3:2013 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 3: Combined equipment

  • EN 1267:2012 Industrial valves – Test of flow resistance using water as test fluid

  • EN 12679:1999 Non-destructive testing – Determination of the size of industrial radiographic sources – Radiographic method

  • EN 1269:1997 Textile floor coverings – Assessment of impregnations in needled floor coverings by means of a soiling test

  • EN 1269:1997/A1:2007 Textile floorcoverings – Assessment of impregnations in needled floorcoverings by means of a soiling test

  • EN 12697-10:2001 Bituminous mixtures – Test methods for hot mix asphalt – Part 10: Compactability

  • EN 12697-10:2001/AC:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 10: Compactibility

  • EN 12697-11:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 11: Determination of the affinity between aggregate and bitumen

  • EN 12697-16:2004 Bituminous mixtures – Test methods for hot mix asphalt – Part 16: Abrasion by studded tyres

  • EN 12697-17:2004+A1:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 17: Particle loss of porous asphalt specimen

  • EN 12697-18:2004 Bituminous mixtures – Test methods for hot mix asphalt – Part 18: Binder drainage

  • EN 12697-19:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 19: Permeability of specimen

  • EN 12697-21:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 21: Indentation using plate specimens

  • EN 12697-22:2003+A1:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 22: Wheel tracking

  • EN 12697-23:2003 Bituminous mixtures – Test methods for hot mix asphalt – Part 23: Determination of the indirect tensile strength of bituminous specimens

  • EN 12697-24:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 24: Resistance to fatigue

  • EN 12697-25:2005 Bituminous mixtures – Test methods for hot mix asphalt – Part 25: Cyclic compression test

  • EN 12697-26:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 26: Stiffness

  • EN 12697-27:2000 Bituminous mixtures – Test methods for hot mix asphalt – Part 27: Sampling

  • EN 12697-28:2000 Bituminous mixtures – Test methods for hot mix asphalt – Part 28: Preparation of samples for determining binder content, water content and grading

  • EN 12697-29:2002 Bituminous mixtures – Test method for hot mix asphalt – Part 29: Determination of the dimensions of a bituminous specimen

  • EN 12697-3:2013 Bituminous mixtures – Test methods for hot mix asphalt – Part 3: Bitumen recovery: Rotary evaporator

  • EN 12697-30:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 30: Specimen preparation by impact compactor

  • EN 12697-31:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 31: Specimen preparation by gyratory compactor

  • EN 12697-32:2003+A1:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

  • EN 12697-33:2003+A1:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 33: Specimen prepared by roller compactor

  • EN 12697-34:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 34: Marshall test

  • EN 12697-35:2004+A1:2007 Bituminous mixtures – Test methods for hot mix asphalt – Part 35: Laboratory mixing

  • EN 12697-36:2003 Bituminous mixtures – Test methods for hot mix asphalt – Part 36: Determination of the thickness of a bituminous pavement

  • EN 12697-37:2003 Bituminous mixtures – Test methods for hot mix asphalt – Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA

  • EN 12697-38:2004 Bituminous mixtures – Test methods for hot mix asphalt – Part 38: Common equipment and calibration

  • EN 12697-39:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 39: Binder content by ignition

  • EN 12697-4:2005 Bituminous mixtures – Test methods for hot mix asphalt – Part 4: Bitumen recovery: Fractionating column

  • EN 12697-40:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 40: In situ drainability

  • EN 12697-41:2005 Bituminous mixtures – Test methods for hot mix asphalt – Part 41: Resistance to de-icing fluids

  • EN 12697-45:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test

  • EN 12697-46:2012 Bituminous mixtures – Test methods for hot mix asphalt – Part 46: Low temperature cracking and properties by uniaxial tension tests

  • EN 12697-47:2010 Bituminous mixtures – Test methods for hot mix asphalt – Part 47: Determination of the ash content of natural asphalts

  • EN 12697-7:2002 Bituminous mixtures – Test methods for hot mix asphalt – Part 7: Determination of bulk density of bituminous specimens by gamma rays

  • EN 12697-8:2003 Bituminous mixtures – Test methods for hot mix asphalt – Part 8: Determination of void characteristics of bituminous specimens

  • EN 1270:2005 Playing field equipment – Basketball equipment – Functional and safety requirements, test methods

  • EN 1271:2004 Playing field equipment – Volleyball equipment – Functional and safety requirements, test methods

  • EN 1271:2004/AC:2005 Playing field equipment – Volleyball equipment – Functional and safety requirements, test methods

  • EN 12710:2006 Fibreboard drums – Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l

  • EN 12714:2009 Plastics drums – Removable head (open head) drums with a nominal capacity of 25 L to 60 L

  • EN 12717:2001+A1:2009 Safety of machine tools – Drilling machines

  • EN 12733:2001+A1:2009 Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety

  • EN 12735-1:2010 Copper and copper alloys – Seamless, round copper tubes for air conditioning and refrigeration – Part 1: Tubes for piping systems

  • EN 12735-2:2010 Copper and copper alloys – Seamless, round copper tubes for air conditioning and refrigeration – Part 2: Tubes for equipment

  • EN 12750:2013 Safety of woodworking machines – Four sided moulding machines

  • EN 12758:2011 Glass in building – Glazing and airborne sound insulation – Product descriptions and determination of properties

  • EN 12760:1999 Valves – Socket welding ends for steel valves

  • EN 12766-1:2000 Petroleum products and used oils – Determination of PCBs and related products – Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)

  • EN 12766-2:2001 Petroleum products and used oils – Determination of PCBs and related products – Part 2: Calculation of polychlorinated biphenyl (PCB) content

  • EN 12766-3:2004 Petroleum products and used oils – Determination of PCBs and related products – Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)

  • EN 12766-3:2004/AC:2007 Petroleum products and used oils – Determination of PCBs and related products – Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture detector (ECD)

  • EN 12775:2001 Solid wood panels – Classification and terminology

  • EN 12779:2004+A1:2009 Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety related performances and safety requirements

  • EN 12781:2001 Wallcoverings – Specification for cork panels

  • EN 1279-1:2004 Glass in Building – Insulating glass units – Part 1: Generalities, dimensional tolerances and rules for the system description

  • EN 1279-1:2004/AC:2006 Glass in Building – Insulating glass units – Part 1: Generalities, dimensional tolerances and rules for the system description

  • EN 1279-2:2002 Glass in building – Insulating glass units – Part 2: Long term test method and requirements for moisture penetration

  • EN 1279-3:2002 Glass in building – Insulating glass units – Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances

  • EN 1279-4:2002 Glass in building – Insulating glass units – Part 4: Methods of test for the physical attributes of edge seals

  • EN 1279-5:2005+A2:2010 Glass in building – Insulating glass units – Part 5: Evaluation of conformity

  • EN 1279-6:2002 Glass in building – Insulating glass units – Part 6: Factory production control and periodic tests

  • EN 12797:2000 Brazing – Destructive tests of brazed joints

  • EN 12797:2000/A1:2003 Brazing – Destructive tests of brazed joints

  • EN 12799:2000 Brazing – Non-destructive examination of brazed joints

  • EN 12799:2000/A1:2003 Brazing – Non-destructive examination of brazed joints

  • EN 12808-1:2008 Grouts for tiles – Part 1: Determination of chemical resistance of reaction resin mortars

  • EN 12808-2:2008 Grouts for tiles – Part 2: Determination of resistance to abrasion

  • EN 12808-3:2008 Grouts for tiles – Part 3: Determination of flexural and compressive strength

  • EN 12808-4:2009 Grouts for tiles – Part 4: Determination of shrinkage

  • EN 12808-4:2009/AC:2011 Grouts for tiles – Part 4: Determination of shrinkage

  • EN 12808-5:2008 Grouts for tiles – Part 5: Determination of water absorption

  • EN 12810-1:2003 Façade scaffolds made of prefabricated components – Part 1: Products specifications

  • EN 12810-2:2003 Façade scaffolds made of prefabricated components – Part 2: Particular methods of structural design

  • EN 12811-1:2003 Temporary works equipment – Part 1: Scaffolds – Performance requirements and general design

  • EN 12811-2:2004 Temporary works equipment – Part 2: Information on materials

  • EN 12811-3:2002 Temporary works equipment – Part 3: Load testing

  • EN 12811-3:2002/AC:2004 Temporary works equipment – Part 3: Load testing

  • EN 12812:2008 Falsework – Performance requirements and general design

  • EN 12813:2004 Temporary works equipment – Load bearing towers of prefabricated components – Particular methods of structural design

  • EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products – Part 7: Tensile test with waisted test specimens

  • EN 12814-8:2001 Testing of welded joints of thermoplastics semi-finished products – Part 8: Requirements

  • EN 12814-8:2001/AC:2003 Testing of welded joints of thermoplastics semi-finished products – Part 8: Requirements

  • EN 12827:1999 Inland navigation vessels – Connections for the transfer of diesel oil

  • EN 12830:1999 Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream – Tests, performance, suitability

  • EN 12833:2001 Skylight and conservatory roller shutters – Resistance to snow load – Test method

  • EN 12835:2000 Airtight shutters – Air permeability test

  • EN 12846-1:2011 Bitumen and bituminous binders – Determination of efflux time by the efflux viscometer – Part 1: Bituminous emulsions

  • EN 12846-2:2011 Bitumen and bituminous binders – Determination of efflux time by the efflux viscometer – Part 2: Cut-back and fluxed bituminous binders

  • EN 12851:2005+A1:2010 Food processing machinery – Catering attachments for machines having an auxiliary drive hub – Safety and hygiene requirements

  • EN 12852:2001+A1:2010 Food processing machinery – Food processors and blenders – Safety and hygiene requirements

  • EN 12853:2001+A1:2010 Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements

  • EN 12853:2001+A1:2010/AC:2010 Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements

  • EN 12854:2003+A1:2010 Food processing machinery – Beam mixers – Safety and hygiene requirements

  • EN 12855:2003+A1:2010 Food processing machinery – Rotating bowl cutters – Safety and hygiene requirements

  • EN 12861:1999 Copper and copper alloys – Scrap

  • EN 12862:2000 Transportable gas cylinders – Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders

  • EN 12863:2002 Transportable gas cylinders – Periodic inspection and maintenance of dissolved acetylene cylinders

  • EN 12863:2002/A1:2005 Transportable gas cylinders – Periodic inspection and maintenance of dissolved acetylene cylinders

  • EN 12865:2001 Hygrothermal performance of building components and building elements – Determination of the resistance of external wall systems to driving rain under pulsating air pressure

  • EN 12871:2013 Wood-based panels – Determination of performance characteristics for load bearing panels for use in floors, roofs and walls

  • EN 12877-3:1999 Colouring materials in plastics – Determination of colour stability to heat during processing of colouring materials in plastics – Part 3: Determination by oven test

  • EN 1288-1:2000 Glass in building – Determination of the bending strength of glass – Part 1: Fundamentals of testing glass

  • EN 1288-2:2000 Glass in building – Determination of bending strength of glass – Part 2: Coaxial double ring test on flat specimens with large test surface areas

  • EN 1288-3:2000 Glass in building – Determination of the bending strength of glass – Part 3: Test with specimen supported at two points (four point bending)

  • EN 1288-4:2000 Glass in building – Determination of the bending strength of glass – Part 4: Testing of channel shaped glass

  • EN 1288-5:2000 Glass in building – Determination of the bending strength of glass – Part 5: Coaxial double ring test on flat specimens with small test surface areas

  • EN 12893:2000 Copper and copper alloys – Determination of spiral elongation number

  • EN 12895:2000 Industrial trucks – Electromagnetic compatibility

  • EN 12898:2001 Glass in building – Determination of the emissivity

  • EN 12900:2013 Refrigerant compressors – Rating conditions, tolerances and presentation of manufacturer’s performance data

  • EN 12916:2006 Petroleum products – Determination of aromatic hydrocarbon types in middle distillates – High performance liquid chromatography method with refractive index detection

  • EN 12927-7:2004 Safety requirements for cableway installations designed to carry persons – Ropes – Part 7: Inspection, repair and maintenance

  • EN 12927-8:2004 Safety requirements for cableway installations designed to carry persons – Ropes – Part 8: Magnetic rope testing (MRT)

  • EN 12939:2000 Thermal performance of building materials and products – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Thick products of high and medium thermal resistance

  • EN 1294:2000 Door leaves – Determination of the behaviour under humidity variations in successive uniform climates

  • EN 12941:1998 Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking

  • EN 12941:1998/A1:2003 Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking

  • EN 12941:1998/A2:2008 Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking

  • EN 12942:1998 Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking

  • EN 12942:1998/A1:2002 Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking

  • EN 12942:1998/A2:2008 Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking

  • EN 12951:2004 Prefabricated accessories for roofing – Permanently fixed roof ladders – Product specification and test methods

  • EN 12952-16:2002 Water-tube boilers and auxiliary installations – Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler

  • EN 12952-18:2012 Water-tube boilers and auxiliary installations – Part 18: Operating instructions

  • EN 12952-7:2012 Water-tube boilers and auxiliary installations – Part 7: Requirements for equipment for the boiler

  • EN 12952-8:2002 Water-tube boilers and auxiliary installations – Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler

  • EN 12952-9:2002 Water-tube boilers and auxiliary installations – Part 9: Requirements for firing systems for pulverized solid fuels for the boiler

  • EN 12953-7:2002 Shell boilers – Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers

  • EN 12953-8:2001 Shell boilers – Part 8: Requirements for safeguards against excessive pressure

  • EN 12953-8:2001/AC:2002 Shell boilers – Part 8: Requirements for safeguards against excessive pressure

  • EN 12956:1999 Wallcoverings in roll form – Determination of dimensions, straightness, spongeability and washability

  • EN 12956:1999/A1:2001 Wallcoverings in roll form – Determination of dimensions, straightness, spongeability and washability

  • EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety

  • EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates – Safety devices for power operated doors and gates – Requirements and test methods

  • EN 1298:1996 Mobile access and working towers – Rules and guidelines for the preparation of an instruction manual

  • EN 12982:2009 Industrial valves – End-to-end and centre-to-end dimensions for butt welding end valves

  • EN 12984:2005+A1:2010 Food processing machinery – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements

  • EN 12999:2011+A1:2012 Cranes – Loader cranes

  • EN 130:1984 Methods of testing doors – Test for the change in stiffness of the door leaves by repeated torsion

  • EN 13008:1999 Steel drums – Removable head (open head) drums with a nominal capacity of 15 l to 62 l

  • EN 13009:2000 Hygrothermal performance of building materials and products – Determination of hygric expansion coefficient

  • EN 1301-1:2008 Aluminium and aluminium alloys – Drawn wire – Part 1: Technical conditions for inspection and delivery

  • EN 1301-2:2008 Aluminium and aluminium alloys – Drawn wire – Part 2: Mechanical properties

  • EN 1301-3:2008 Aluminium and aluminium alloys – Drawn wire – Part 3: Tolerances on dimensions

  • EN 13015:2001+A1:2008 Maintenance for lifts and escalators – Rules for maintenance instructions

  • EN 13016-1:2007 Liquid petroleum products – Vapour pressure – Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

  • EN 13016-2:2007 Liquid petroleum products – Vapour pressure – Part 2: Determination of absolute pressure (AVP) between 40 C and 100 C

  • EN 13017-1:2000 Solid wood panels – Classification by surface appearance – Part 1: Softwood

  • EN 13017-2:2000 Solid wood panels – Classification by surface appearance – Part 2: Hardwood

  • EN 13018:2001 Non-destructive testing – Visual testing – General principles

  • EN 13018:2001/A1:2003 Non-destructive testing – Visual testing – General principles

  • EN 13022-1:2006+A1:2010 Glass in building – Structural sealant glazing – Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

  • EN 13022-2:2006+A1:2010 Glass in building – Structural sealant glazing – Part 2: Assembly rules

  • EN 13024-1:2011 Glass in building – Thermally toughened borosilicate safety glass – Part 1: Definition and description

  • EN 13024-2:2004 Glass in building – Thermally toughened borosilicate safety glass – Part 2: Evaluation of conformity/Product standard

  • EN 13025-3:2005 Packaging – Light gauge metal containers – Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20 000 ml, 25 000 ml and 30 000 ml

  • EN 1303:2005 Building hardware – Cylinders for locks – Requirements and test methods

  • EN 1303:2005/AC:2008 Building hardware – Cylinders for locks – Requirements and test methods

  • EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 7: Cutting machines for laminated glass

  • EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 9: Washing installations

  • EN 13036-7:2003 Road and airfield surface characteristics – Test methods – Part 7: Irregularity measurement of pavement courses : the straightedge test

  • EN 13036-8:2008 Road and airfield surface characteristics – Test methods – Part 8: Determination of transverse unevenness indices

  • EN 1304:2013 Clay roofing tiles and fittings – Product definitions and specifications

  • EN 13044-1:2011 Intermodal Loading Units – Marking – Part 1: Markings for identification

  • EN 13044-2:2011 Intermodal Loading Units – Marking – Part 2: Markings of swap bodies related to rail operation

  • EN 13044-3:2011 Intermodal Loading Units – Marking – Part 3: Markings of semi-trailers related to rail operation

  • EN 13049:2003 Windows – Soft and heavy body impact – Test method, safety requirements and classification

  • EN 1305:1996 Inland navigation vessels – Connections for the discharge of oily mixture

  • EN 13050:2011 Curtain Walling – Watertightness – Laboratory test under dynamic condition of air pressure and water spray

  • EN 13051:2001 Curtain Walling – Watertightness – Site test

  • EN 13056:2000 Inland navigation vessels – Stairs with inclination angles of 30° to < 45° – Requirements, types

  • EN 13057:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of resistance of capillary absorption

  • EN 1306:1996 Inland navigation vessels – Connections for the discharge of waste water

  • EN 13060:2004+A2:2010 Small steam sterilizers

  • EN 13062:2003 Products and systems for the protection and repair of concrete structure – Test method – Determination of thixotropy of products for protection of reinforcement

  • EN 13068-1:1999 Non-destructive testing – Radioscopic testing – Part 1: Quantitative measurement of imaging properties

  • EN 13068-2:1999 Non-destructive testing – Radioscopic testing – Part 2: Check of long term stability of imaging devices

  • EN 13068-3:2001 Non-destructive testing – Radioscopic testing – Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays

  • EN 1307:2008 Textile floor coverings – Classification of pile carpets

  • EN 13074-1:2011 Bitumen and bituminous binders – Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders – Part 1: Recovery by evaporation

  • EN 13074-2:2011 Bitumen and bituminous binders – Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders – Part 2: Stabilisation after recovery by evaporation

  • EN 13075-1:2009 Bitumen and bituminous binders – Determination of breaking behaviour – Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

  • EN 13075-2:2009 Bitumen and bituminous binders – Determination of breaking behaviour – Part 2: Determination of fines mixing time of cationic bituminous emulsions

  • EN 1308:2007 Adhesives for tiles – Determination of slip

  • EN 13084-7:2012 Free-standing chimneys – Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

  • EN 13085:2001 Wallcoverings – Specification for cork rolls

  • EN 13087-10:2012 Protective helmets – Test methods – Part 10: Resistance to radiant heat

  • EN 13087-7:2000 Protective helmets – Test methods – Part 7: Flame resistance

  • EN 13087-7:2000/A1:2001 Protective helmets – Test methods – Part 7: Flame resistance

  • EN 13087-8:2000 Protective helmets – Test methods – Part 8: Electrical properties

  • EN 13087-8:2000/A1:2005 Protective helmets – Test methods – Part 8: Electrical properties

  • EN 13089:2011 Mountaineering equipment – Ice-tools – Safety requirements and test methods

  • EN 13090:2000 Means for resealing threaded joints of gas pipework in buildings

  • EN 13096:2003 Transportable gas cylinders – Conditions for filling gases into receptacles – Single component gases

  • EN 13096:2003/AC:2006 Transportable gas cylinders – Conditions for filling gases into receptacles – Single component gases

  • EN 13098:2000 Workplace atmosphere – Guidelines for measurement of airborne micro-organisms and endotoxin

  • EN 13099:2003 Transportable gas cylinders – Conditions for filling gas mixtures into receptacles

  • EN 13108-21:2006 Bituminous mixtures – Material specifications – Part 21: Factory Production Control

  • EN 13108-21:2006/AC:2008 Bituminous mixtures – Material specifications – Part 21: Factory Production Control

  • EN 13108-7:2006 Bituminous mixtures – Material specifications – Part 7: Porous Asphalt

  • EN 13108-7:2006/AC:2008 Bituminous mixtures – Material specifications – Part 7: Porous Asphalt

  • EN 13108-8:2005 Bituminous mixtures – Material specifications – Part 8: Reclaimed asphalt

  • EN 131-1:2007+A1:2011 Ladders – Part 1: Terms, types, functional sizes

  • EN 13115:2001 Windows – Classification of mechanical properties – Racking, torsion and operating forces

  • EN 13116:2001 Curtain walling – Resistance to wind load – Performance requirements

  • EN 13119:2007 Curtain walling – Terminology

  • EN 131-2:2010+A1:2012 Ladders – Part 2: Requirements, testing, marking

  • EN 13120:2009 Internal blinds – Performance requirements including safety

  • EN 13123-1:2001 Windows, doors and shutters – Explosion resistance – Requirements and classification – Part 1: Shock tube

  • EN 13123-2:2004 Windows, doors, and shutters – Explosion resistance – Requirements and classification – Part 2: Range test

  • EN 13124-1:2001 Windows, doors and shutters – Explosion resistance – Test method – Part 1: Shock tube

  • EN 13124-2:2004 Windows, doors and shutters – Explosion resistance – Test method – Part 2: Range test

  • EN 13125:2001 Shutters and blinds – Additional thermal resistance – Allocation of a class of air permeability to a product

  • EN 13126-1:2011 Building hardware – Hardware for windows and door height windows – Requirements and test methods – Part 1: Requirements common to all types of hardware

  • EN 13126-10:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 10: Arm-balancing systems

  • EN 13126-11:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 11: Top hung projecting reversible hardware

  • EN 13126-12:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 12: Side hung projecting reversible hardware

  • EN 13126-13:2012 Building hardware – Hardware for windows and balcony doors – Requirements and test methods – Part 13: Sash balances

  • EN 13126-14:2012 Building hardware – Hardware for windows and balcony doors – Requirements and test methods – Part 14: Sash fasteners

  • EN 13126-15:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 15: Rollers for horizontal sliding and sliding folding windows and doors

  • EN 13126-16:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 16: Hardware for Lift&Slide windows and doors

  • EN 13126-17:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 17: Hardware for Tilt&Slide windows and doors

  • EN 13126-19:2011 Building hardware – Requirements and test methods for windows and door height windows – Part 19: Sliding Closing Devices

  • EN 13126-2:2011 Building hardware – Requirements and test methods for windows and doors height windows – Part 2: Window fastener handles

  • EN 13126-3:2011 Building hardware – Hardware for windows and door-height windows – Requirements and test methods – Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware

  • EN 13126-4:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 4: Espagnolettes

  • EN 13126-5:2011 Building hardware – Hardware for windows and door height windows – Requirements and test methods – Part 5: Devices that restrict the opening of windows and door height windows

  • EN 13126-6:2008 Building hardware – Requirements and test methods for windows and doors height windows – Part 6: Variable geometry stay hinges (with or without a friction stay)

  • EN 13126-7:2007 Building hardware – Requirements and test methods for windows and door height windows – Part 7: Finger catches

  • EN 13126-8:2006 Building hardware – Requirements and test methods for windows and doors height windows – Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware

  • EN 13126-9:2013 Building hardware – Requirements and test methods for windows and door height windows – Part 9: Hardware for horizontal and vertical pivot windows

  • EN 131-3:2007 Ladders – Part 3: User Instructions

  • EN 13130-7:2004 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants

  • EN 13130-8:2004 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 8: Determination of isocyanates in plastics

  • EN 13131:2000 Liquid petroleum products – Determination of nickel and vanadium content – Atomic absorption spectrometric method

  • EN 13132:2000 Liquid petroleum products – Unleaded petrol – Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching

  • EN 13134:2000 Brazing – Procedure approval

  • EN 131-4:2007 Ladders – Part 4: Single or multiple hinge-joint ladders

  • EN 13141-10:2008 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 10: Humidity controlled extract air terminal device

  • EN 13141-7:2010 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings

  • EN 13141-8:2006 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room

  • EN 13141-9:2008 Ventilation for buildings – Performance testing of components/products for residential ventilation – Part 9: Externally mounted humidity controlled air transfer device

  • EN 13146-7:2012 Railway applications – Track – Test methods for fastening systems – Part 7: Determination of clamping force

  • EN 13146-8:2012 Railway applications – Track – Test methods for fastening systems – Part 8: In service testing

  • EN 13146-9:2009+A1:2011 Railway applications – Track – Test methods for fastening systems – Part 9: Determination of stiffness

  • EN 13147:2001 Copper and copper alloys – Determination of residual stresses in the border area of slit strip

  • EN 13148:2010 Copper and copper alloys – Hot-dip tinned strip

  • EN 13149-4:2004 Public transport – Road vehicle scheduling and control systems – Part 4: General application rules for CANopen transmission buses

  • EN 13149-5:2004 Public transport – Road vehicle scheduling and control systems – Part 5: CANopen cabling specifications

  • EN 13162:2012 Thermal insulation products for buildings – Factory made mineral wool (MW) products – Specification

  • EN 13163:2012 Thermal insulation products for buildings – Factory made expanded polystyrene (EPS) products – Specification

  • EN 13164:2012 Thermal insulation products for buildings – Factory made extruded polystyrene foam (XPS) products – Specification

  • EN 13165:2012 Thermal insulation products for buildings – Factory made rigid polyurethane foam (PU) products – Specification

  • EN 13166:2012 Thermal insulation products for buildings – Factory made phenolic foam (PF) products – Specification

  • EN 13167:2012 Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification

  • EN 13168:2012 Thermal insulation products for buildings – Factory made wood wool (WW) products – Specification

  • EN 13169:2012 Thermal insulation products for buildings – Factory made expanded perlite board (EPB) products – Specification

  • EN 131-7:2013 Ladders – Part 7: Mobile ladders with platform

  • EN 13170:2012 Thermal insulation products for buildings – Factory made products of expanded cork (ICB) – Specification

  • EN 13171:2012 Thermal insulation products for buildings – Factory made wood fibre (WF) products – Specification

  • EN 13172:2012 Thermal insulation products – Evaluation of conformity

  • EN 13178:2000 Personal eye-protection – Eye protectors for snowmobile users

  • EN 13179-2:2000 Tests for filler aggregate used in bituminous mixtures – Part 2: Bitumen number

  • EN 1318:2005 Textile floor coverings – Determination of the apparent effective thickness of the backing

  • EN 1318:2005/AC:2007 Textile floor coverings – Determination of the apparent effective thickness of the backing

  • EN 13183-1:2002 Moisture content of a piece of sawn timber – Part 1: Determination by oven dry method

  • EN 13183-1:2002/AC:2003 Moisture content of a piece of sawn timber – Part 1: Determination by oven dry method

  • EN 13184:2001 Non-destructive testing – Leak testing – Pressure change method

  • EN 13184:2001/A1:2003 Non-destructive testing – Leak testing – Pressure change method

  • EN 13185:2001 Non-destructive testing – Leak testing – Tracer gas method

  • EN 13185:2001/A1:2003 Non-destructive testing – Leak testing – Tracer gas method

  • EN 13187:1998 Thermal performance of buildings – Qualitative detection of thermal irregularities in building envelopes – Infrared method (ISO 6781:1983 modified)

  • EN 13192:2001 Non destructive testing – Leak testing – Calibration of reference leaks for gases

  • EN 13195:2013 Aluminium and aluminium alloys – Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)

  • EN 132:1998 Respiratory protective devices – Definitions of terms and pictograms

  • EN 13203-1:2006 Gas-fired domestic appliances producing hot water – Appliances not exceding 70 kW heat input and 300 l water storage capacity – Part 1: Assessment of performance of hot water deliveries

  • EN 13203-2:2006 Gas-fired domestic appliances producing hot water – Appliances not exceeding 70 kW heat input and 300 l water storage capacity – Part 2: Assessment of energy consumption

  • EN 13203-3:2010 Solar supported gas-fired domestic appliances producing hot water – Appliances not exceeding 70 kW heat input and 500 litres water storage capacity – Part 3: Assessment of energy consumption

  • EN 13205:2001 Workplace atmospheres – Assessment of performance of instruments for measurement of airborne particle concentrations

  • EN 13215:2000 Condensing units for refrigeration – Rating conditions, tolerances and presentation of manufacturer’s performance data

  • EN 13219:2008 Gymnastic equipment – Trampolines – Functional and safety requirements, test methods

  • EN 1323:2007 Adhesives for tiles – Concrete slabs for tests

  • EN 13232-7:2006+A1:2011 Railway applications – Track – Switches and crossings – Part 7: Crossings with moveable parts

  • EN 13232-8:2007+A1:2011 Railway applications – Track – Switches and crossings – Part 8: Expansion devices

  • EN 13232-9:2006+A1:2011 Railway applications – Track – Switches and crossings – Part 9: Layouts

  • EN 13238:2010 Reaction to fire tests for building products – Conditioning procedures and general rules for selection of substrates

  • EN 1324:2007 Adhesives for tiles – Determination of shear adhesion strength of dispersion adhesives

  • EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics

  • EN 1326:1996 Gas welding equipment – Small kits for gas brazing and welding

  • EN 13263-1:2005+A1:2009 Silica fume for concrete – Part 1: Definitions, requirements and conformity criteria

  • EN 13263-2:2005+A1:2009 Silica fume for concrete – Part 2: Conformity evaluation

  • EN 1327:1996 Gas welding equipment – Thermoplastic hoses for welding and allied processes

  • EN 13271:2001 Timber fasteners – Characteristic load-carrying capacities and slip-moduli for connector joints

  • EN 13271:2001/AC:2003 Timber fasteners – Characteristic load-carrying capacities and slip-moduli for connector joints

  • EN 13274-1:2001 Respiratory protective devices – Methods of test – Part 1: Determination of inward leakage and total inward leakage

  • EN 13274-2:2001 Respiratory protective devices – Methods of test – Part 2: Practical performance tests

  • EN 13274-3:2001 Respiratory protective devices – Methods of test – Part 3: Determination of breathing resistance

  • EN 13274-4:2001 Respiratory protective devices – Methods of test – Part 4: Flame tests

  • EN 13274-5:2001 Respiratory protective devices – Methods of test – Part 5: Climatic conditions

  • EN 13274-6:2001 Respiratory protective devices – Methods of test – Part 6: Determination of carbon dioxide content of the inhalation air

  • EN 13274-7:2008 Respiratory protective devices – Methods of test – Part 7: Determination of particle filter penetration

  • EN 13274-8:2002 Respiratory protective devices – Methods of test – Part 8: Determination of dolomite dust clogging

  • EN 13277-7:2009 Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors

  • EN 13278:2013 Open fronted gas-fired independent space heaters

  • EN 1328:1996 Cement bonded particleboards – Determination of frost resistance

  • EN 13281:2000 Inland navigation vessels – Safety requirements for walkways and working places

  • EN 13282-1:2013 Hydraulic road binders – Part 1: Rapid hardening hydraulic road binders – Composition, specifications and conformity criteria

  • EN 13282-3:2013 Hydraulic road binders – Part 3: Conformity evaluation

  • EN 13286-40:2003 Unbound and hydraulically bound mixtures – Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures

  • EN 13286-41:2003 Unbound and hydraulically bound mixtures – Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

  • EN 13286-45:2003 Unbound and hydraulically bound mixtures – Part 45: Test method for the determination of the workability period of hydraulically bound mixtures

  • EN 13286-46:2003 Unbound and hydraulically bound mixtures – Part 46: Test method for the determination of the moisture condition value

  • EN 13286-47:2012 Unbound and hydraulically bound mixtures – Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling

  • EN 13286-48:2005 Unbound and hydraulically bound mixtures – Part 48: Test method for the determination of degree of pulverisation

  • EN 13286-49:2004 Unbound and hydraulically bound mixtures – Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder

  • EN 13286-50:2004 Unbound and hydraulically bound mixtures – Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction

  • EN 13286-51:2004 Unbound and hydraulically bound mixtures – Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction

  • EN 13286-52:2004 Unbound and hydraulically bound mixtures – Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression

  • EN 13286-53:2004 Unbound and hydraulically bound mixtures – Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression

  • EN 13286-7:2004 Unbound and hydraulically bound mixtures – Part 7: Cyclic load triaxial test for unbound mixtures

  • EN 13293:2002 Transportable gas cylinders – Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide

  • EN 13294:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of stiffening time

  • EN 13295:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of resistance to carbonation

  • EN 13297:2007 Textile floor coverings – Classification of needled pile floor coverings

  • EN 13297:2007/AC:2008 Textile floor coverings – Classification of needled pile floor coverings

  • EN 133:2001 Respiratory protective devices – Classification

  • EN 1330-1:1998 Non destructive testing – Terminology – Part 1: List of general terms

  • EN 1330-10:2003 Non-destructive testing – Terminology – Part 10: Terms used in visual testing

  • EN 1330-11:2007 Non-destructive testing – Terminology – Terms used in X-ray diffraction from polycrystalline and amorphous materials

  • EN 1330-2:1998 Non destructive testing – Terminology – Part 2: Terms common to the non-destructive testing methods

  • EN 1330-3:1997 Non-destructive testing – Terminology – Part 3: Terms used in industrial radiographic testing

  • EN 1330-4:2010 Non-destructive testing – Terminology – Part 4: Terms used in ultrasonic testing

  • EN 1330-7:2005 Non-destructive testing – Terminology – Part 7: Terms used in magnetic particle testing

  • EN 1330-8:1998 Non-destructive testing – Terminology – Part 8: Terms used in leak tightness testing

  • EN 1330-9:2009 Non-destructive testing – Terminology – Part 9: Terms used in acoustic emission testing

  • EN 13319:2000 Diving accessories – Depth gauges and combined depth and time measuring devices – Functional and safety requirements, test methods

  • EN 13321-1:2012 Open data communication in building automation, controls and building management – Home and building electronic system – Part 1: Product and system requirements

  • EN 13321-2:2012 Open Data Communication in Building Automation, Controls and Building Management – Home and Building Electronic Systems – Part 2: KNXnet/IP Communication

  • EN 13322-1:2003 Transportable gas cylinders – Refillable welded steel gas cylinders – Design and construction – Part 1: Carbon steel

  • EN 13322-1:2003/A1:2006 Transportable gas cylinders – Refillable welded steel gas cylinders – Design and construction – Part 1: Carbon steel

  • EN 13322-2:2003 Transportable gas cylinders – Reffilable welded steel gas cylinders – Design and construction – Part 2: Stainless steel

  • EN 13322-2:2003/A1:2006 Transportable gas cylinders – Refillable welded steel gas cylinders – Design and construction – Part 2: Stainless steel

  • EN 13329:2006+A1:2008 Laminate floor coverings – Elements with a surface layer based on aminoplastic thermosetting resins – Specifications, requirements and test methods

  • EN 1333:2006 Flanges and their joints – Pipework components – Definition and selection of PN

  • EN 13330:2013 Shutters – Hard body impact and prevention of access – Test methods

  • EN 13331-1:2002 Trench lining systems – Part 1: Product specifications

  • EN 13331-2:2002 Trench lining systems – Part 2: Assessment by calculation or test

  • EN 13348:2008 Copper and copper alloys – Seamless, round copper tubes for medical gases or vacuum

  • EN 13349:2002 Copper and copper alloys – Pre-insulated copper tubes with solid covering

  • EN 13353:2008+A1:2011 Solid wood panels (SWP) – Requirements

  • EN 13354:2008 Solid wood panels (SWP) – Bonding quality – Test method

  • EN 13363-1:2003+A1:2007 Solar protection devices combined with glazing – Calculation of solar and light transmittance – Part 1: Simplified method

  • EN 13363-1:2003+A1:2007/AC:2008 Solar protection devices combined with glazing – Calculation of solar and light transmittance – Part 1: Simplified method

  • EN 13363-2:2005 Solar protection devices combined with glazing – Calculation of total solar energy transmittance and light transmittance – Part 2: Detailed calculation method

  • EN 13363-2:2005/AC:2006 Solar protection devices combined with glazing – Calculation of total solar energy transmittance and light transmittance – Part 2: Detailed calculation method

  • EN 13365:2002 Transportable gas cylinders – Cylinder bundles for permanent and liquefied gases (excluding acetylene) – Inspection at time of filling

  • EN 13365:2002/A1:2005 Transportable gas cylinders – Cylinder bundles for permanent and liquefied gases (excluding acetylene) – Inspection at time of filling

  • EN 1337-10:2003 Structural Bearings – Part 10: Inspection and maintenance

  • EN 13374:2013 Temporary edge protection systems – Product specification – Test methods

  • EN 13377:2002 Prefabricated timber formwork beams – Requirements, classification and assessment

  • EN 1337-7:2004 Structural bearings – Part 7: Spherical and cylindrical PTFE bearings

    • | 1 || 2 || 3 |

top

Company Info :

퍼포먼스네트워크(주)

강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
Tel : 02-980-9800(대표전화)
Tel : 070-4221-8620(해외)
E-Mail: info @ anytest.co.kr (Technical,시험인증)

ALT_TEXT
QR Code Generator
  • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

    [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

  • MIL-Spec Documents2013년 December 11일 - 6:40 pm

    MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

  • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

    아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

  • IP Code2016년 April 12일 - 6:42 pm

    IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

  • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

    ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

April 2024
M T W T F S S
« Aug    
1234567
891011121314
15161718192021
22232425262728
2930  
© Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.