STD-EN 1XXXX Conti 3
- EN 16192:2011 Characterization of waste – Analysis of eluates
- EN 16194:2012 Mobile non-sewer-connected toilet cabins – Requirements of services and products relating to the deployment of cabins and sanitary products
- EN 16195:2012 Fertilizers – Determination of chlorides in the absence of organic material
- EN 16196:2012 Fertilizers – Manganimetric determination of extracted calcium following precipitation in the form of oxalate
- EN 16197:2012 Fertilizers – Determination of magnesium by atomic absorption spectrometry
- EN 16198:2012 Fertilizers – Determination of magnesium by complexometry
- EN 16199:2012 Fertilizers – Determination of the sodium extracted by flame-emission spectrometry
- EN 1620:1996 Biotechnology – Large-scale process and production – Plant building according to the degree of hazard
- EN 16204:2012 Foodstuffs – Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS
- EN 16205:2013 Laboratory measurement of walking noise on floors
- EN 16206:2012 Animal feeding stuffs – Determination of arsenic by hydride generation atomic absorption spectrometry (HGAAS) after microwave pressure digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)
- EN 16210:2013 Transportation loads – Measurement and evaluation of climatic and other loads – Data acquisition and general requirements for measuring equipment
- EN 1621-1:2012 Motorcyclists’ protective clothing against mechanical impact – Part 1: Motorcyclists’ limb joint impact protectors – Requirements and test methods
- EN 1621-2:2003 Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods
- EN 1621-2:2003/AC:2006 Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods
- EN 1621-4:2013 Motorcyclists’ protective clothing against mechanical impact – Part 4: Motorcyclists’ inflatable protectors – Requirements and test methods
- EN 1622:2006 Water quality – Determination of the threshold odour number (TON) and threshold flavour number (TFN)
- EN 16222:2012 Cathodic protection of ship hulls
- EN 16223:2012 Leather – Requirements for the designation and description of leather in upholstery and automotive interior applications
- EN 16232:2013 Child use and care articles – Infant swings
- EN 16235:2013 Railway application – Testing for the acceptance of running characteristics of railway vehicles – Freight wagons – Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363
- EN 16236:2013 Evaluation of conformity of aggregates – Initial Type Testing and Factory Production Control
- EN 16237:2013 Classification of non-electrical sources of incoherent optical radiation
- EN 1624:1999 Textiles and textile products – Burning behaviour of industrial and technical textiles – Procedure to determine the flame spread of vertically oriented specimens
- EN 16245-1:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 1: General requirements
- EN 16245-2:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 2: Specific requirements for resin, curing systems, additives and modifiers
- EN 16245-3:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 3: Specific requirements for fibre
- EN 16245-4:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 4: Specific requirements for fabrics
- EN 16245-5:2013 Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 5: Specific requirements for core materials
- EN 16246:2012 Agricultural machinery – Backhoes – Safety
- EN 16249:2013 Tanks for the transport of dangerous goods – Service equipment – Cap for the adaptor for bottom loading and unloading
- EN 1625:1999 Textiles and textile products – Burning behaviour of industrial and technical textiles – Procedure to determine the ignitability of vertically oriented specimens
- EN 16253:2013 Air quality – Atmospheric measurements near ground with active Differential Optical Absorption Spectroscopy (DOAS) – Ambient air and diffuse emission measurements
- EN 16254:2013 Adhesives – Emulsion polymerized isocyanate (EPI) for load-bearing timber structures – Classification and performance requirements
- EN 16256-1:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 1: Terminology
- EN 16256-2:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 2: Categories of theatrical pyrotechnic articles
- EN 16256-3:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 3: Requirements for construction and performance
- EN 16256-4:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 4: Minimum labelling requirements and instructions for use
- EN 16256-5:2012 Pyrotechnic articles – Theatrical pyrotechnic articles – Part 5: Test methods
- EN 16257:2012 Tanks for the transport of dangerous goods – Service equipment – Footvalve sizes other than 100 mm dia (nom)
- EN 1626:2008 Cryogenic vessels – Valves for cryogenic service
- EN 16260:2012 Water quality – Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data
- EN 16261-1:2012 Pyrotechnic articles – Fireworks, category 4 – Part 1: Terminology
- EN 16261-2:2013 Pyrotechnic articles – Fireworks, Category 4 – Part 2: Requirements
- EN 16261-3:2012 Pyrotechnic articles – Fireworks, Category 4 – Part 3: Test methods
- EN 16261-4:2012 Pyrotechnic articles – Fireworks, Category 4 – Part 4: Minimum labelling requirements and instructions for use
- EN 16268:2013 Perfomance of reflecting surfaces for luminaires
- EN 1627:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters – Burglar resistance – Requirements and classification
- EN 16270:2012 Automotive fuels – Determination of high-boiling components including fatty acid methyl esters in petrol – Gas chromatographic method
- EN 16271:2012 Value management – Functional expression of the need and functional performance specification – Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product
- EN 16272-1:2012 Railway applications – Track – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the acoustic performance – Part 1: Intrinsic characteristics – Sound absorption in the laboratory under diffuse sound field conditions
- EN 16272-2:2012 Railway applications – Track – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the acoustic performance – Part 2: Intrinsic characteristics – Airborne sound insulation in the laboratory under diffuse sound field conditions
- EN 16272-3-1:2012 Railway applications – Track – Noise barriers and related devices acting on airborne sound propagation – Test method for determining the acoustic performance – Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse field applications
- EN 16276:2013 Evacuation Lighting in Road Tunnels
- EN 16277:2012 Animal feeding stuffs – Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide)
- EN 1628:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters – Burglar resistance – Test method for the determination of resistance under static loading
- EN 16283:2013 Packaging – Flexible aluminium tubes – Test method to measure the force to pierce the membrane
- EN 16284:2013 Packaging – Flexible laminate and plastic tubes – Test method to determine the adhesive strength of the membrane
- EN 16285:2013 Packaging – Flexible aluminium tubes – Test method to measure the deformation of the aluminium tube body (Guillotine test)
- EN 16286-1:2013 Railway applications – Gangway systems between vehicles – Part 1: Main applications
- EN 16286-2:2013 Railway applications – Gangway systems between vehicles – Part 2: Acoustic measurements
- EN 16289:2013 Glass packaging – Screw finishes for pressure capsules – MCA 7,5 RF finish
- EN 1629:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters – Burglar resistance – Test method for the determination of resistance under dynamic loading
- EN 16291-1:2013 Glass packaging – Screw finishes for pressure capsules – Part 1: Returnable glass MCA 2 finish
- EN 16291-2:2013 Glass packaging – Screw finishes for pressure capsules – Part 2: One way glass MCA 2 finish
- EN 16292:2013 Glass packaging – Screw finishes – Depressed threads
- EN 16293:2013 Packaging – Glass Packaging – Deep BVS finishes for still wines
- EN 16294:2012 Petroleum products and fat and oil derivatives – Determination of phosphorus content in fatty acid methyl esters (FAME) – Optical emission spectral analysis with inductively coupled plasma (ICP OES)
- EN 16296:2012 Imperfections in thermoplastics welded joints – Quality levels
- EN 16297-1:2012 Pumps – Rotodynamic pumps – Glandless circulators – Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
- EN 16297-2:2012 Pumps – Rotodynamic pumps – Glandless circulators – Part 2: Calculation of energy efficiency index (EEI) for standalone circulators
- EN 16297-3:2012 Pumps – Rotodynamic pumps – Glandless circulators – Part 3: Energy efficiency index (EEI) for circulators integrated in products
- EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
- EN 1630:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters – Burglar resistance – Test method for the determination of resistance to manual burglary attempts
- EN 16300:2012 Automotive fuels – Determination of iodine value in fatty acid methyl esters (FAME) – Calculation method from gas chromatographic data
- EN 16301:2013 Natural stone test methods – Determination of sensitivity to accidental staining
- EN 16304:2013 Automatic vent valves for gas burners and gas burning appliances
- EN 16306:2013 Natural stone test methods – Determination of resistance of marble to thermal and moisture cycles
- EN 16307-1:2013 Industrial trucks – Safety requirements and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- EN 16307-5:2013 Industrial trucks – Safety requirements and verification – Part 5: Supplementary requirements for pedestrian-propelled trucks
- EN 16312:2013 Intelligent transport systems – Automatic Vehicle and Equipment Registration (AVI/AEI) – Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication
- EN 16313:2013 Connections for heating and cooling appliances – Detachable connection with outside threaded pipe G ¾ A and inside cone
- EN 16314:2013 Gas meters – Additional functionalities
- EN 16317:2013 Fertilizers – Determination of trace elements – Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
- EN 16318:2013 Fertilizers – Determination of trace elements – Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
- EN 16319:2013 Fertilizers – Determination of trace elements – Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution
- EN 16320:2013 Fertilizers – Determination of trace elements – Determination of mercury by vapour generation (VG) after aqua regia dissolution
- EN 16328:2012 Fertilizers – Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) – Method using high-performance liquid chromatography (HPLC)
- EN 16329:2013 Diesel and domestic heating fuels – Determination of cold filter plugging point – Linear cooling bath method
- EN 16337:2013 Hardware for furniture – Strength and loading capacity of shelf supports
- EN 16339:2013 Ambient air – Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
- EN 1634-1:2008 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware – Part 1: Fire resistance tests for doors, shutters and openable windows
- EN 1634-2:2008 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware – Part 2: Fire resistance characterisation test for elements of building hardware
- EN 1634-3:2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware – Part 3: Smoke control test for door and shutter assemblies
- EN 1634-3:2004/AC:2006 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware – Part 3: Smoke control test for door and shutter assemblies
- EN 16348:2013 Gas infrastructure – Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines – Functional requirements
- EN 16357:2013 Carbonate liming materials – Determination of reactivity – Automatic titration method with citric acid
- EN 16361:2013 Power operated pedestrian doors – Product standard, performance characteristics – Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics
- EN 16370:2013 Chemicals used for treatment of water intended for human consumption – Sodium chloride for on site electrochlorination using membrane cells
- EN 16377:2013 Characterization of waste – Determination of brominated flame retardants (BFR) in solid waste
- EN 1639:2009 Dentistry – Medical devices for dentistry – Instruments
- EN 1640:2009 Dentistry – Medical devices for dentistry – Equipment
- EN 16401:2013 Chemicals used for treatment of swimming pool water – Sodium chloride used for electrochlorinator systems
- EN 16402:2013 Paints and varnishes – Assessment of emissions of substances from coatings into indoor air – Sampling, conditioning and testing
- EN 1641:2009 Dentistry – Medical devices for dentistry – Materials
- EN 16416:2013 Geosynthetic clay barriers – Determination of water flux index – Flexible wall permeameter method at constant head
- EN 1642:2011 Dentistry – Medical devices for dentistry – Dental implants
- EN 16423:2013 Liquefied petroleum gases – Determination of dissolved residue – Gas chromatographic method using liquid, on-column injection
- EN 1643:2000 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
- EN 1644-1:1997 Test methods for nonwoven compresses for medical use – Part 1: Nonwovens used in the manufacture of compresses
- EN 1644-2:2000 Test methods for nonwoven compresses for medical use – Part 2: Finished compresses
- EN 16445:2013 Ventilation for buildings – Air diffusion – Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
- EN 1645-1:2012 Leisure accommodation vehicles – Caravans – Part 1: Habitation requirements relating to health and safety
- EN 1645-2:2008 Leisure accommodation vehicles – Caravans – Part 2: User payload
- EN 1646-1:2012 Leisure accommodation vehicles – Motor caravans – Part 1: Habitation requirements relating to health and safety
- EN 1646-2:2008 Leisure accommodation vehicles – Motor caravans – Part 2: User payload
- EN 1647:2012 Leisure accommodation vehicles – Caravan holiday homes – Habitation requirements relating to health and safety
- EN 1648-1:2012 Leisure accommodation vehicles – 12 V direct current extra low voltage electrical installations – Part 1: Caravans
- EN 1648-2:2012 Leisure accommodation vehicles – 12 V direct current extra low voltage electrical installations – Part 2: Motor caravans
- EN 1649:2004 AIDC technologies – Operational aspects affecting the reading of bar code symbols
- EN 1650:2008+A1:2013 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas – Test method and requirements (phase 2, step 1)
- EN 1651:1999 Paragliding equipment – Harnesses – Safety requirements and strength tests
- EN 1652:1997 Copper and copper alloys – Plate, sheet, strip and circles for general purposes
- EN 1652:1997/AC:2003 Copper and copper alloys – Plate, sheet, strip and circles for general purposes
- EN 1653:1997 Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units
- EN 1653:1997/A1:2000 Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units
- EN 1654:1997 Copper and copper alloys – Strip for springs and connectors
- EN 1654:1997/AC:2003 Copper and copper alloys – Strip for springs and connectors
- EN 1655:1997 Copper and copper alloys – Declarations of conformity
- EN 1656:2009 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (phase 2, step 1)
- EN 1656:2009/AC:2010 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (phase 2, step 1)
- EN 1657:2005 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (phase 2, step 1)
- EN 1657:2005/AC:2007 Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area – Test method and requirements (phase 2, step 1)
- EN 1659:1996 In vitro diagnostic systems – Culture media for microbiology – Terms and definitions
- EN 166:2001 Personal eye-protection – Specifications
- EN 1661:1997 Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
- EN 1661:1997/AC:1998 Hexagon nuts with flange (ISO/DIS 4161:1996, modified)
- EN 1662:1997 Hexagon bolts with flange – Small series (ISO/DIS 15071:1996, modified)
- EN 1662:1997/AC:2007 Hexagon bolts with flange – Small series (ISO/DIS 15071:1996, modified)
- EN 1663:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified)
- EN 1664:1997 Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified)
- EN 1665:1997 Hexagon bolts with flange – Heavy series
- EN 1665:1997/AC:2007 Hexagon bolts with flange – Heavy series
- EN 1666:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified)
- EN 1667:1997 Prevailing torque type all-metal hexagon nuts with flange metric fine pitch thread (ISO 12126:1997, modified)
- EN 1669:1996 Aluminium and aluminium alloys – Test methods – Earing test for sheet and strip
- EN 167:2001 Personal eye-protection – Optical test methods
- EN 1670:2007 Building hardware – Corrosion resistance – Requirements and test methods
- EN 1670:2007/AC:2008 Building hardware – Corrosion resistance – Requirements and test methods
- EN 1671:1997 Pressure sewerage systems outside buildings
- EN 1672-2:2005+A1:2009 Food processing machinery – Basic concepts – Part 2: Hygiene requirements
- EN 1673:2000+A1:2009 Food processing machinery – Rotary rack ovens – Safety and hygiene requirements
- EN 1674:2000+A1:2009 Food processing machinery – Dough and pastry brakes – Safety and hygiene requirements
- EN 1676:2010 Aluminium and aluminium alloys – Alloyed ingots for remelting – Specifications
- EN 1677-1:2000+A1:2008 Components for slings – Safety – Part 1: Forged steel components, Grade 8
- EN 1677-2:2000+A1:2008 Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, Grade 8
- EN 1677-3:2001+A1:2008 Components for slings – Safety – Part 3: Forged steel self-locking hooks – Grade 8
- EN 1677-4:2000+A1:2008 Components for slings – Safety – Part 4: Links, Grade 8
- EN 1677-5:2001+A1:2008 Components for slings – Safety – Part 5: Forged steel lifting hooks with latch – Grade 4
- EN 1677-6:2001+A1:2008 Components for slings – Safety – Part 6: Links – Grade 4
- EN 1678:1998+A1:2010 Food processing machinery – Vegetable cutting machines – Safety and hygiene requirements
- EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines
- EN 168:2001 Personal eye-protection – Non-optical test methods
- EN 1680:1997 Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanisms
- EN 169:2002 Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use
- EN 170:2002 Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use
- EN 1704:1997 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after temperature cycling under bending
- EN 1705:1996 Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow
- EN 1706:2010 Aluminium and aluminium alloys – Castings – Chemical composition and mechanical properties
- EN 1707:1996 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment – Lock fittings
- EN 1708-1:2010 Welding – Basic welded joint details in steel – Part 1: Pressurized components
- EN 1708-2:2000 Welding – Basic weld joint details in steel – Part 2: Non internal pressurized components
- EN 1708-3:2012 Welding – Basic weld joint details in steel – Part 3: Clad, buttered and lined pressurized components
- EN 1709:2004 Safety requirements for cableway installations designed to carry persons – Precommissioning inspection, maintenance, operational inspection and checks
- EN 171:2002 Personal eye-protection – Infrared filters – Transmittance requirements and recommended use
- EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines
- EN 1710:2005+A1:2008/AC:2010 Equipment and components intended for use in potentially explosive atmospheres in underground mines
- EN 1711:2000 Non-destructive examination of welds – Eddy current examination of welds by complex plane analysis
- EN 1711:2000/A1:2003 Non-destructive examination of welds – Eddy current examination of welds by complex plane analysis
- EN 1715-1:2008 Aluminium and aluminium alloys – Drawing stock – Part 1: General requirements and technical conditions for inspection and delivery
- EN 1715-2:2008 Aluminium and aluminium alloys – Drawing stock – Part 2: Specific requirements for electrical applications
- EN 1715-3:2008 Aluminium and aluminium alloys – Drawing stock – Part 3: Specific requirements for mechanical uses (excluding welding)
- EN 1715-4:2008 Aluminium and aluminium alloys – Drawing stock – Part 4: Specific requirements for welding applications
- EN 1716:1997 Plastics piping systems – Polyethylene (PE) tapping tees – Test method for impact resistance of an assembled tapping tee
- EN 1717:2000 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
- EN 1719:1998 Adhesives for paper and board, packaging and disposable sanitary products – Tack measurement for pressure sensitive adhesives – Determination of loop tack
- EN 172:1994 Personal eye protection – Sunglare filters for industrial use
- EN 172:1994/A1:2000 Personal eye-protection – Sunglare filters for industrial use
- EN 172:1994/A2:2001 Personal eye protection – Sunglare filters for industrial use
- EN 1720:1998 Adhesives for paper and board, packaging and disposable sanitary products – Determination of dispersability
- EN 1721:1998 Adhesives for paper and board, packaging and disposable sanitary products – Track measurement for pressure sensitive adhesives – Determination of rolling ball track
- EN 1725:1998 Domestic furniture – Beds and mattresses – Safety requirements and test methods
- EN 1726-2:2000 Safety of Industrial Trucks – Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N – Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
- EN 1728:2012 Furniture – Seating – Test methods for the determination of strength and durability
- EN 1728:2012/AC:2013 Furniture – Seating – Test methods for the determination of strength and durability
- EN 1729-1:2006 Furniture – Chairs and tables for educational institutions – Part 1: Functional dimensions
- EN 1729-2:2012 Furniture – Chairs and tables for educational institutions – Part 2: Safety requirements and test methods
- EN 1730:2012 Furniture – Tables – Test methods for the determination of stability, strength and durability
- EN 1731:2006 Personal eye protection – Mesh eye and face protectors
- EN 1734:1996 Rubber- or plastics coated fabrics – Determination of resistance to water penetration – Low pressure method
- EN 1735:1996 Rubber- or plastics coated fabrics – Determination of flexibility
- EN 1736:2008 Refrigerating systems and heat pumps – Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes – Requirements, design and installation
- EN 1737:1998 Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- EN 1738:1998 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
- EN 1739:2007 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- EN 174:2001 Personal eye-protection – Ski goggles for downhill skiing
- EN 1740:1998 Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
- EN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- EN 1742:1998 Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates – Part 1: Chemical analysis
- EN 1744-3:2002 Tests for chemical properties of aggregates – Part 3: Preparation of eluates by leaching of aggregates
- EN 1744-4:2005 Tests for chemical properties of aggregates – Part 4: Determination of water susceptibility of fillers for bituminous mixtures
- EN 1744-5:2006 Tests for chemical properties of aggregates – Part 5: Determination of acid soluble chloride salts
- EN 1744-6:2006 Tests for chemical properties of aggregates – Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
- EN 1744-7:2012 Tests for chemical properties of aggregates – Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
- EN 1744-8:2012 Tests for chemical properties of aggregates – Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
- EN 1745:2012 Masonry and masonry products – Methods for determining thermal properties
- EN 1746:1998 Safety of machinery – Guidance for the drafting of the noise clauses of safety standards
- EN 1748-1-1:2004 Glass in building – Special basic products -Borosilicate glasses – Part 1-1: Definition and general physical and mechanical properties
- EN 1748-1-2:2004 Glass in building – Special basic products – Borosilicate glasses – Part 1-2: Evaluation of conformity/Product standard
- EN 1748-2-1:2004 Glass in building – Special basic products – Glass ceramics – Part 2-1 Definitions and general physical and mechanical properties
- EN 1748-2-2:2004 Glass in building – Special basic products – Glass ceramics – Part 2-2: Evaluation of conformity/Product standard
- EN 175:1997 Personal protection – Equipment for eye and face protection during welding and allied processes
- EN 1751:1998 Ventilation for buildings – Air terminal devices – Aerodynamic testing of dampers and valves
- EN 1753:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings
- EN 1753:1997/AC:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings
- EN 1754:1997 Magnesium and magnesium alloys – Magnesium and magnesium alloy anodes, ingots and castings – Designation system
- EN 1755:2000+A2:2013 Safety of industrial trucks – Operation in potentially explosive atmospheres – Use in flammable gas, vapour, mist and dust
- EN 1756-1:2001+A1:2008 Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods
- EN 1756-2:2004+A1:2009 Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 2: Tail lifts for passengers
- EN 1757-3:2002 Safety of industrial trucks – Pedestrian controlled manual and semi-manual trucks – Part 3: Platform trucks
- EN 1758:1997 Copper and copper alloys – Strip for lead frames
- EN 1759-1:2004 Flanges and their joint – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 1: Steel flanges, NPS 1/2 to 24
- EN 1759-3:2003 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 3: Copper alloy flanges
- EN 1759-3:2003/AC:2004 Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 3: Copper alloy flanges
- EN 1759-4:2003 Flanges and their joint – Circular flanges for pipes, valves, fittings and accessories, class designated – Part 4: Aluminium alloy flanges
- EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery – Specification
- EN 1762:2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
- EN 1762:2003/AC:2007 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
- EN 1765:2004 Rubber hose assemblies for oil suction and discharge services – Specification for the assemblies
- EN 1766:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reference concretes for testing
- EN 1767:1999 Products and systems for the protection and repair of concrete structures – Test methods – Infrared analysis
- EN 1770:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the coefficient of thermal expansion
- EN 1771:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of injectability and splitting test
- EN 1771:2004/AC:2005 Products and systems for the protection and repair of concrete structures – Test methods – Determination of injectability and splitting test
- EN 1772:2000 Surface active agents – Determination of wetting power by immersion (ISO 8022:1990 modified)
- EN 1773:1996 Textiles – Fabrics – Determination of width and length
- EN 1774:1997 Zinc and zinc alloys – Alloys for foundry purposes – Ingot and liquid
- EN 1775:2007 Gas supply – Gas pipework for buildings – Maximum operating pressure less than or equal to 5 bar – Functional recommendations
- EN 1776:1998 Gas supply systems – Natural gas measuring stations – Functional requirements
- EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services – Safety requirements and testing
- EN 1778:1999 Characteristic values for welded thermoplastics constructions – Determination of allowable stresses and moduli for design of thermoplastics equipment
- EN 1779:1999 Non-destructive testing – Leak testing – Criteria for method and technique selection
- EN 1779:1999/A1:2003 Non-destructive testing – Leak testing – Criteria for method and technique selection
- EN 1780-1:2002 Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloys and castings – Part 1: Numerical designation system
- EN 1780-2:2002 Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloys and castings – Part 2: Chemical symbol based designation system
- EN 1780-3:2002 Aluminium and aluminium alloys – Designation of alloyed aluminium ingots for remelting, master alloys and castings – Part 3: Writing rules for chemical composition
- EN 1783:1997 Matches – Performance requirements, safety and classification
- EN 1783:1997/A1:2002 Matches – Performance requirements, safety and classification
- EN 1784:2003 Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic analysis of hydrocarbons
- EN 1785:2003 Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
- EN 1786:1996 Foodstuffs – Detection of irradiated food containing bone – Method by ESR spectroscopy
- EN 1787:2000 Foodstuffs – Detection of irradiated food containing cellulose by ESR spectroscopy
- EN 1788:2001 Foodstuffs – Thermoluminescence detection of irradiated food from which silicate minerals can be isolated
- EN 1789:2007+A1:2010 Medical vehicles and their equipment – Road ambulances
- EN 179:2008 Building hardware – Emergency exit devices operated by a lever handle or push pad, for use on escape routes – Requirements and test methods
- EN 1790:2013 Road marking materials – Preformed road markings
- EN 1791:1997 Surface active agents – Fatty alkyl dimethyl amine oxides – Determination of the amine oxide content
- EN 1792:2003 Welding – Multilingual list of terms for welding and related processes
- EN 1793-1:2012 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 1: Intrinsic characteristics of sound absorption
- EN 1793-2:2012 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
- EN 1793-3:1997 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 3: Normalized traffic noise spectrum
- EN 1793-6:2012 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 6: Intrinsic characteristics – In situ values of airborne sound insulation under direct sound field conditions
- EN 1794-1:2011 Road traffic noise reducing devices – Non-acoustic performance – Part 1: Mechanical performance and stability requirements
- EN 1794-2:2011 Road traffic noise reducing devices – Non-acoustic performance – Part 2: General safety and environmental requirements
- EN 1796:2013 Plastics piping systems for water supply with or without pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
- EN 1797:2001 Cryogenic vessels – Gas/material compatibility
- EN 1799:1998 Products and systems for the protection and repair of concrete structures – Test methods – Tests to measure the suitability of structural bonding agents for application to concrete surface
- EN 1802:2002 Transportable gas cylinders – Periodic inspection and testing of seamless aluminium alloy gas cylinders
- EN 1803:2002 Transportable gas cylinders – Periodic inspection and testing of welded carbon steel gas cylinders
- EN 1804-1:2001+A1:2010 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements
- EN 1804-2:2001+A1:2010 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams
- EN 1804-3:2006+A1:2010 Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 3: Hydraulic control systems
- EN 1806:2006 Chimneys – Clay/ceramic flue blocks for single wall chimneys – Requirements and test methods
- EN 1807-1:2013 Safety of woodworking machines – Band sawing machines – Part 1: Table band saws and band re-saws
- EN 1807-2:2013 Safety of woodworking machines – Band sawing machines – Part 2: Log sawing machines
- EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment – Design calculations, stability criteria, construction – Tests
- EN 1809:1997 Diving accessories – Buoyancy compensators – Functional and safety requirements, test methods
- EN 1811:2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
- EN 1811:2011/AC:2012 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
- EN 1814:2005 Textile floor coverings – Determination of resistance to damage at cut edges using the modified Vettermann drum test
- EN 1815:1997 Resilient and textile floor coverings – Assessment of static electrical propensity
- EN 1816:2010 Resilient floor coverings – Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
- EN 1817:2010 Resilient floor coverings – Specification for homogeneous and heterogeneous smooth rubber floor coverings
- EN 1818:1998 Resilient floor coverings – Determination of the effect of loaded heavy duty castors
- EN 1820:2005+A1:2009 Anaesthetic reservoir bags (ISO 5362:2000, modified)
- EN 1821-1:1996 Electrically propelled road vehicles – Measurement of road operating ability – Part 1: Pure electric vehicles
- EN 1821-2:1999 Electrically propelled road vehicles – Measurement of road operating ability – Part 2: Thermal electric hybrid vehicles
- EN 1822-1:2009 High efficiency air filters (EPA, HEPA and ULPA) – Part 1: Classification, performance testing, marking
- EN 1822-2:2009 High efficiency air filters (EPA, HEPA and ULPA) – Part 2: Aerosol production, measuring equipment, particle counting statistics
- EN 1822-3:2009 High efficiency air filters (EPA, HEPA and ULPA) – Part 3: Testing flat sheet filter media
- EN 1822-4:2009 High efficiency air filters (EPA, HEPA and ULPA) – Part 4: Determining leakage of filter elements (scan method)
- EN 1822-5:2009 High efficiency air filters (EPA, HEPA and ULPA) – Part 5: Determining the efficiency of filter elements
- EN 1824:2011 Road marking materials – Road trials
- EN 1825-1:2004 Grease separators – Part 1: Principles of design, performance and testing, marking and quality control
- EN 1825-1:2004/AC:2006 Grease separators – Part 1: Principles of design, performance and testing, marking and quality control
- EN 1825-2:2002 Grease separators – Part 2: Selection of nominal size, installation, operation and maintenance
- EN 1826:1996 Biotechnology – Large-scale process and production – Control procedures for raw materials
- EN 1827:1999+A1:2009 Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking
- EN 1829-1:2010 High pressure water jet machines – Safety requirements – Part 1: Machines
- EN 1829-2:2008 High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors
- EN 1829-2:2008/AC:2011 High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors
- EN 1834-1:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 1: Group II engines for use in flammable gas and vapour atmospheres
- EN 1834-2:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
- EN 1834-3:2000 Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 3: Group II engines for use in flammable dust atmospheres
- EN 1837:1999+A1:2009 Safety of machinery – Integral lighting of machines
- EN 1838:2013 Lighting applications – Emergency lighting
- EN 1839:2012 Determination of explosion limits of gases and vapours
- EN 1841:1998 Adhesives – Test methods for adhesives for floor coverings and wall coverings – Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
- EN 1842:1997 Plastics – Thermoset moulding compounds (SMC – BMC) – Determination of compression moulding shrinkage
- EN 1844:2013 Flexible sheets for waterproofing – Determination of resistance to ozone – Plastic and rubber sheets for roof waterproofing
- EN 1845:2007 Footwear manufacturing machines – Footwear moulding machines – Safety requirements
- EN 1846-1:2011 Firefighting and rescue service vehicles – Part 1: Nomenclature and designation
- EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance
- EN 1846-3:2013 Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance
- EN 1847:2009 Flexible sheets for waterproofing – Plastics and rubber sheets for roof waterproofing – Methods for exposure to liquid chemicals, including water
- EN 1848-1:1999 Flexible sheets for waterproofing – Determination of length, width and straightness – Part 1: Bitumen sheets for roof waterproofing
- EN 1848-2:2001 Flexible sheets for waterproofing – Determination of length, width, straightness and flatness – Part 2: Plastic and rubber sheets for roof waterproofing
- EN 1849-1:1999 Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 1: Bitumen sheets for roof waterproofing
- EN 1849-2:2009 Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 2: Plastic and rubber sheets
- EN 1850-1:1999 Flexible sheets for waterproofing – Determination of visible defects – Part 1: Bitumen sheets for roof waterproofing
- EN 1850-2:2001 Flexible sheets for waterproofing – Determination of visible defects – Part 2: Plastic and rubber sheets for roof waterproofing
- EN 1852-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 1: Specifications for pipes, fittings and the system
- EN 1853:1999+A1:2009 Agricultural machinery – Trailers with tipping body – Safety
- EN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances
- EN 1856-1:2009 Chimneys – Requirements for metal chimneys – Part 1: System chimney products
- EN 1856-2:2009 Chimneys – Requirements for metal chimneys – Part 2: Metal flue liners and connecting flue pipes
- EN 1857:2010 Chimneys – Components – Concrete flue liners
- EN 1858:2008+A1:2011 Chimneys – Components – Concrete flue blocks
- EN 1859:2009+A1:2013 Chimneys – Metal chimneys – Test methods
- EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing – Part 1: Barbecues burning solid fuels – Requirements and test methods
- EN 1860-2:2005 Appliances, solid fuels and firelighters for barbecueing – Part 2: Barbecue charcoal and barbecue charcoal briquettes – Requirements and test methods
- EN 1860-3:2003 Appliances, solid fuels and firelighters for barbecuing – Part 3 : Firelighters for igniting solid fuels for use in barbecue appliances – Requirements and test methods
- EN 1860-3:2003/A1:2006 Appliances, solid fuels and firelighters for barbecuing – Firelighters for igniting solid fuels for use in barbecue – Requirements and test methods
- EN 1860-4:2004 Appliances, solid fuels and firelighters for barbecueing – Part 4: Single use barbecues burning solid fuels – Requirements and test methods
- EN 1861:1998 Refrigerating systems and heat pumps – System flow diagrams and piping and instrument diagrams – Layout and symbols
- EN 1863-1:2011 Glass in building – Heat strengthened soda lime silicate glass – Part 1: Definition and description
- EN 1863-2:2004 Glass in building – Heat strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard
- EN 1864:2008 Inland navigation vessels – Wheelhouse – Ergonomic and safety requirements
- EN 1865-1:2010 Patient handling equipment used in road ambulances – Part 1: General stretcher systems and patient handling equipment
- EN 1865-2:2010 Patient handling equipment used in road ambulances – Part 2: Power assisted stretcher
- EN 1865-3:2012 Patient handling equipment used in road ambulances – Part 3: Heavy duty stretcher
- EN 1865-4:2012 Patient handling equipment used in road ambulances – Part 4: Foldable patient transfer chair
- EN 1865-5:2012 Patient handling equipment used in road ambulances – Part 5: Stretcher support
- EN 1866:2005 Mobile fire extinguishers
- EN 1866-1:2007 Mobile fire extinguishers – Part 1: Characteristics, performance and test methods
- EN 1866-3:2013 Mobile fire extinguishers – Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1
- EN 1867:1997 Machine-readable cards – Health care applications – Numbering system and registration procedure for issuer identifiers
- EN 1868:1997 Personal protective equipment against falls from a height – List of equivalent terms
- EN 1869:1997 Fire blankets
- EN 1870-10:2013 Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
- EN 1870-11:2013 Safety of woodworking machines – Circular sawing machines – Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
- EN 1870-12:2013 Safety of woodworking machines – Circular sawing machines – Part 12: Pendulum cross-cut sawing machines
- EN 1870-13:2007+A2:2012 Safety of woodworking machines – Circular sawing machines – Part 13: Horizontal beam panel sawing machines
- EN 1870-14:2007+A2:2012 Safety of woodworking machines – Circular sawing machines – Part 14: Vertical panel sawing machines
- EN 1870-15:2012 Safety of woodworking machines – Circular sawing machines – Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
- EN 1870-16:2012 Safety of woodworking machines – Circular sawing machines – Part 16: Double mitre sawing machines for V cutting
- EN 1870-17:2012 Safety of woodworking machines – Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
- EN 1870-18:2013 Safety of woodworking machines – Circular sawing machines – Part 18: Dimension saws
- EN 1870-3:2001+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
- EN 1870-4:2012 Safety of woodworking machines – Circular sawing machines – Part 4: Multiblade rip sawing machines with manual loading and/or unloading
- EN 1870-5:2002+A2:2012 Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross-cut sawing machines
- EN 1870-6:2002+A1:2009 Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
- EN 1870-7:2012 Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
- EN 1870-8:2012 Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
- EN 1870-9:2012 Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
- EN 1871:2000 Road marking materials – Physical properties
- EN 1873:2005 Prefabricated accessories for roofing – Individual roof lights of plastics – Product specification and test methods
- EN 1875-3:1997 Rubber- or plastics- coated fabrics – Determination of tear strength – Part 3: Trapezoidal method
- EN 1876-1:1997 Rubber- or plastics-coated fabrics – Low-temperature tests – Part 1: Bending test
- EN 1876-2:1997 Rubber- or plastics- coated fabrics – Low temperature tests – Part 2: Impact test on loop
- EN 1877-1:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reactive functions related to epoxy resins – Part 1: Determination of epoxy equivalent
- EN 1877-2:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reactive functions related to epoxy resins – Part 2: Determination of amine functions using the total basicity number
- EN 1881:2006 Products and systems for the protection and repair of concrete structures – Test methods – Testing of anchoring products by the pull-out method
- EN 1882:1998 Feather and down – Test methods – Determination of the commercial mass of a lot of feather and down
- EN 1883:1998 Feather and down – Sampling in view of tests
- EN 1884:1998 Feather and down – Test methods – Determination of microbiological state
- EN 1885:1998 Feather and down – Terms and definitions
- EN 1885:1998/A1:2003 Feather and down – Terms and definitions
- EN 1886:2007 Ventilation for buildings – Air handling units – Mechanical performance
- EN 1888:2012 Child care articles – Wheeled child conveyances – Safety requirements and test methods
- EN 1889-1:2011 Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles
- EN 1889-2:2003+A1:2009 Machines for underground mines – Mobile machines working underground – Safety – Part 2: Rail locomotives
- EN 1890:2006 Surface active agents – Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
- EN 1891:1998 Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes
- EN 1892:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature under inert atmosphere – Determination of tensile properties
- EN 1893:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure – Determination of tensile properties
- EN 1894:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at high temperature under inert atmosphere – Determination of shear strength by compression loading of notched specimens
- EN 1895:2001 Adhesives for paper and board, packaging and disposable sanitary products – 180° – “T” peel test for a flexible-to-flexible assembly
- EN 1895:2001/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products – 180°-”T” peel test for a flexible-to-flexible assembly
- EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products – Determination of tensile strength and elongation
- EN 1899-1:1998 Water quality – Determination of biochemical oxygen demand after n days (BODn) – Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815:1989, modified)
- EN 1899-2:1998 Water quality – Determination of biochemical oxygen demand after n days (BODn) – Part 2: Method for undiluted samples (ISO 5815:1989, modified)
- EN 19:2002 Industrial valves – Marking of metallic valves
- EN 1906:2012 Building hardware – Lever handles and knob furniture – Requirements and test methods
- EN 1912:2012 Structural Timber – Strength classes – Assignment of visual grades and species
- EN 1912:2012/AC:2013 Structural Timber – Strength classes – Assignment of visual grades and species
- EN 1914:2009 Inland navigation vessels – Work boats, ship’s boats and lifeboats
- EN 1919:2000 Transportable gas cylinders – Cylinders for liquefied gases (excluding acetylene and LPG) – Inspection at time of filling
- EN 1920:2000 Transportable gas cylinders – Cylinders for compressed gases (excluding acetylene) – Inspection at time of filling
- EN 1929-7:2005 Basket trolleys – Part 7: Requirements and tests for basket trolleys with baby and child carrying facilities
- EN 1932:2013 External blinds and shutters – Resistance to wind loads – Method of testing and performance criteria
- EN 1933:1998 Exterior blinds – Resistance to load due to water accumulation – Test method
- EN 1934:1998 Thermal performance of buildings – Determination of thermal resistance by hot box method using heat flow meter – Masonry
- EN 1935:2002 Building hardware – Single-axis hinges – Requirements and test methods
- EN 1935:2002/AC:2003 Building hardware – Single-axis hinges – Requirements and test methods
- EN 1938:2010 Personal eye protection – Goggles for motorcycle and moped users
- EN 1946-1:1999 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 1: Common criteria
- EN 1946-2:1999 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 2: Measurements by guarded hot plate method
- EN 1946-3:1999 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 3: Measurements by heat flow meter method
- EN 1946-4:2000 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 4: Measurements by hot box methods
- EN 1946-5:2000 Thermal performance of building products and components – Specific criteria for the assessment of laboratories measuring heat transfer properties – Part 5: Measurements by pipe test methods
- EN 196-1:2005 Methods of testing cement – Part 1: Determination of strength
- EN 196-10:2006 Methods of testing cement – Part 10: Determination of the water-soluble chromium (VI) content of cement
- EN 196-2:2013 Method of testing cement – Part 2: Chemical analysis of cement
- EN 196-3:2005+A1:2008 Methods of testing cement – Part 3: Determination of setting times and soundness
- EN 1964-3:2000 Transportable gas cylinders – Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres – Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa
- EN 196-5:2011 Methods of testing cement – Part 5: Pozzolanicity test for pozzolanic cement
- EN 196-6:2010 Methods of testing cement – Part 6: Determination of fineness
- EN 196-7:2007 Methods of testing cement – Part 7: Methods of taking and preparing samples of cement
- EN 1968:2002 Transportable gas cylinders – Periodic inspection and testing of seamless steel gas cylinders
- EN 1968:2002/A1:2005 Transportable gas cylinders – Periodic inspection and testing of seamless steel gas cylinders
- EN 196-8:2010 Methods of testing cement – Part 8: Heat of hydration – Solution method
- EN 196-9:2010 Methods of testing cement – Part 9: Heat of hydration – Semi-adiabatic method
- EN 197-1:2011 Cement – Part 1: Composition, specifications and conformity criteria for common cements
- EN 197-2:2000 Cement – Part 2: Conformity evaluation
- EN 1983:2013 Industrial valves – Steel ball valves
- EN 1984:2010 Industrial valves – Steel gate valves
- EN 1991-1-7:2006 Eurocode 1 – Actions on structures – Part 1-7: General actions – Accidental actions
- EN 1991-1-7:2006/AC:2010 Eurocode 1 – Actions on structures – Part 1-7: General actions – Accidental actions
- EN 1993-1-12:2007 Eurocode 3 – Design of steel structures – Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
- EN 1993-1-12:2007/AC:2009 Eurocode 3 – Design of steel structures – Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
- EN 1993-1-7:2007 Eurocode 3 – Design of steel structures – Part 1-7: Plated structures subject to out of plane loading
- EN 1993-1-7:2007/AC:2009 Eurocode 3 – Design of steel structures – Part 1-7: Plated structures subject to out of plane loading
- EN 1993-1-8:2005 Eurocode 3: Design of steel structures – Part 1-8: Design of joints
- EN 1993-1-8:2005/AC:2009 Eurocode 3: Design of steel structures – Part 1-8: Design of joints
- EN 1993-1-9:2005 Eurocode 3: Design of steel structures – Part 1-9: Fatigue
- EN 1993-1-9:2005/AC:2009 Eurocode 3: Design of steel structures – Part 1-9: Fatigue
- EN 1994-2:2005 Eurocode 4 – Design of composite steen and concrete structures – Part 2: General rules and rules for bridges
