You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » STD-EN 1XXXX Conti 2

STD-EN 1XXXX Conti 2

| 1 || 2 || 3 |

  • EN 1337-8:2007 Structural bearings – Part 8: Guide Bearings and Restraint Bearings

  • EN 1337-9:1997 Structural bearings – Part 9: Protection

  • EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members – Part 4: Applied passive protection to steel members

  • EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members – Part 6: Applied protection to concrete filled hollow steel columns

  • EN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members – Part 8: Applied reactive protection to steel members

  • EN 13385:2002 Transportable gas cylinders – Battery vehicles for permanent and liquefied gases (excluding acetylene) – Inspection at time of filling

  • EN 13395-1:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 1: Test for flow of thixotropic mortars

  • EN 13395-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 2: Test for flow of grout or mortar

  • EN 13395-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 3: Test for flow of repair concrete

  • EN 13395-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 4: Application of repair mortar overhead

  • EN 13396:2004 Products and systems for the protection and repair of concrete structures – Test methods – Measurement of chloride ion ingress

  • EN 13397:2001 Industrial valves – Diaphragm valves made of metallic materials

  • EN 134:1998 Respiratory protective devices – Nomenclature of components

  • EN 13411-7:2006+A1:2008 Terminations for steel wire ropes – Safety – Part 7: Symmetric wedge socket

  • EN 13411-8:2011 Terminations for steel wire ropes – Safety – Part 8: Swage terminals and swaging

  • EN 13412:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of modulus of elasticity in compression

  • EN 13413:2001 Resilient floor coverings – Polyvinyl chloride floor coverings on a filled fibrous backing – Specification

  • EN 13417-1:2001 Reinforcement – Specifications for woven fabrics – Part 1: Designation

  • EN 13417-2:2001 Reinforcement – Specifications for woven fabrics – Part 2: Methods of test and general requirements

  • EN 13417-3:2001 Reinforcement – Specifications for woven fabrics – Part 3: Specific requirements

  • EN 13420:2011 Windows – Behaviour between different climates – Test method

  • EN 13445-1:2009 Unfired pressure vessels – Part 1: General

  • EN 13445-2:2009 Unfired pressure vessels – Part 2: Materials

  • EN 13445-2:2009/A1:2012 Unfired pressure vessels – Part 2: Materials

  • EN 13445-2:2009/A2:2012 Unfired pressure vessels – Part 2: Materials

  • EN 13445-3:2009 Unfired pressure vessels – Part 3: Design

  • EN 13445-3:2009/A1:2012 Unfired pressure vessels – Part 3: Design

  • EN 13445-4:2009 Unfired pressure vessels – Part 4: Fabrication

  • EN 13445-4:2009/A1:2011 Unfired pressure vessels – Part 4: Fabrication

  • EN 13445-5:2009 Unfired pressure vessels – Part 5: Inspection and testing

  • EN 13445-5:2009/A1:2011 Unfired pressure vessels – Part 5: Inspection and testing

  • EN 13445-5:2009/A2:2011 Unfired pressure vessels – Part 5: Inspection and testing

  • EN 13445-5:2009/A3:2011 Unfired pressure vessels – Part 5: Inspection and testing

  • EN 13445-5:2009/A4:2013 Unfired pressure vessels – Part 5: Inspection and testing

  • EN 13445-6:2009 Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

  • EN 13445-8:2009 Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys

  • EN 13446:2002 Wood-based panels – Determination of withdrawal capacity of fasteners

  • EN 13451-1:2011 Swimming pool equipment – Part 1: General safety requirements and test methods

  • EN 13451-10:2004 Swimming pool equipment – Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment

  • EN 13451-11:2004 Swimming pool equipment – Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads

  • EN 13451-2:2001 Swimming pool equipment – Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends

  • EN 13451-2:2001/AC:2003 Swimming pool equipment – Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends

  • EN 13451-3:2011+A1:2013 Swimming pool equipment – Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features

  • EN 13451-4:2001 Swimming pool equipment – Part 4: Additional specific safety requirements and test methods for starting platforms

  • EN 13451-5:2001 Swimming pool equipment – Part 5: Additional specific safety requirements and test methods for lane lines

  • EN 13451-6:2001 Swimming pool equipment – Part 6: Additional specific safety requirements and test methods for turning boards

  • EN 13451-7:2001 Swimming pool equipment – Part 7: Additional specific safety requirements and test methods for water polo goals

  • EN 1346:2007 Adhesives for tiles – Determination of open time

  • EN 13467:2001 Thermal insulating products for building equipment and industrial installations – Determination of dimensions, squareness and linearity of preformed pipe insulation

  • EN 13468:2001 Thermal insulating products for building equipment and industrial installations – Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH

  • EN 13469:2012 Thermal insulating products for building equipment and industrial installations – Determination of water vapour transmission properties of preformed pipe insulation

  • EN 13470:2001 Thermal insulating products for building equipment and industrial installations – Determination of the apparent density of preformed pipe insulation

  • EN 13471:2001 Thermal insulating products for building equipment and industrial installations – Determination of the coefficient of thermal expansion

  • EN 13472:2012 Thermal insulating products for building equipment and industrial installations – Determination of short term water absorption by partial immersion of preformed pipe insulation

  • EN 13477-1:2001 Non-destructive testing – Acoustic emission – Equipment characterisation – Part 1: Equipment description

  • EN 13478:2001+A1:2008 Safety of machinery – Fire prevention and protection

  • EN 13479:2004 Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials

  • EN 1348:2007 Adhesives for tiles – Determination of tensile adhesion strength for cementitious adhesives

  • EN 13480-8:2012 Metallic industrial piping – Part 8: Additional requirements for aluminium and aluminium alloy piping

  • EN 13481-7:2012 Railway applications – Track – Performance requirements for fastening systems – Part 7: Special fastening systems for switches and crossings and check rails

  • EN 13487:2003 Heat exchangers – Forced convection air cooled refrigerant condensers and dry coolers – Sound measurement

  • EN 1349:2009 Industrial process control valves

  • EN 13494:2002 Thermal insulation products for building applications – Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

  • EN 13495:2002 Thermal insulation products for building applications – Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)

  • EN 13496:2013 Thermal insulation products for building applications – Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)

  • EN 13497:2002 Thermal insulation products for building applications – Determination of the resistance to impact of external thermal insulation composite systems (ETICS)

  • EN 13498:2002 Thermal insulation products for building applications – Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)

  • EN 13499:2003 Thermal insulation products for buildings – External thermal insulation composite systems (ETICS) based on expanded polystyrene – Specification

  • EN 135:1998 Respiratory protective devices – List of equivalent terms

  • EN 13500:2003 Thermal insulation products for buildings – External thermal insulation composite systems (ETICS) based on mineral wool – Specification

  • EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements – Part 1: Classification using data from reaction to fire tests

  • EN 13501-2:2007+A1:2009 Fire classification of construction products and building elements – Part 2: Classification using data from fire resistance tests, excluding ventilation services

  • EN 13501-3:2005+A1:2009 Fire classification of construction products and building elements – Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers

  • EN 13501-4:2007+A1:2009 Fire classification of construction products and building elements – Part 4: Classification using data from fire resistance tests on components of smoke control systems

  • EN 13501-5:2005+A1:2009 Fire classification of construction products and building elements – Part 5: Classification using data from external fire exposure to roofs tests

  • EN 13523-10:2010 Coil coated metals – Test methods – Part 10: Resistance to fluorescent UV radiation and water condensation

  • EN 13523-12:2004 Coil coated metals – Test methods – Part 12: Resistance to scratching

  • EN 13523-14:2001 Coil coated metals – Test methods – Part 14: Chalking (Helmen method)

  • EN 13523-15:2002 Coil coated metals – Test methods – Part 15: Metamerism

  • EN 13523-16:2004 Coil coated metals – Test methods – Part 16: Resistance to abrasion

  • EN 13523-17:2011 Coil coated metals – Test methods – Part 17: Adhesion of strippable films

  • EN 13523-18:2002 Coil coated metals – Test methods – Part 18: Resistance to staining

  • EN 13523-21:2010 Coil coated metals – Test methods – Part 21: Evaluation of outdoor exposed panels

  • EN 13523-22:2010 Coil coated metals – Test methods – Part 22: Colour difference – Visual comparison

  • EN 13523-23:2002 Coil coated metals – Test methods – Part 23: Colour stability in humid atmospheres containing sulfur dioxide

  • EN 13523-24:2004 Coil coated metals – Test methods – Part 24: Resistance to blocking and pressure marking

  • EN 13523-25:2006 Coil coated metals – Test methods – Part 25: Resistance to humidity

  • EN 13523-26:2006 Coil coated metals – Test methods – Part 26: Resistance to condensation of water

  • EN 13523-27:2009 Coil coated metals – Test methods – Part 27: Resistance to humid poultice (Cataplasm test)

  • EN 13523-29:2010 Coil coated metals – Test methods – Part 29: Resistance to environmental soiling (Dirt pick-up and striping)

  • EN 13523-7:2001 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)

  • EN 13523-8:2010 Coil coated metals – Test methods – Part 8: Resistance to salt spray (fog)

  • EN 13523-9:2001 Coil coated metals – Test methods – Part 9: Resistance to water immersion

  • EN 13527:1999 Shutters and blinds – Measurement of operating force – Test methods

  • EN 13529:2003 Products and systems for the protection and repair of concrete structures – Test methods – Resistance to severe chemical attack

  • EN 13537:2012 Requirements for sleeping bags

  • EN 13538-2:2002 Determination of dimensional characteristics of sleeping bags – Part 2: Thickness and elastic recovery

  • EN 13538-3:2002 Determination of dimensional characteristics of sleeping bags – Part 3: Volume under load and easiness of packing

  • EN 13541:2012 Glass in building – Security glazing – Testing and classification of resistance against explosion pressure

  • EN 13547:2013 Industrial valves – Copper alloy ball valves

  • EN 13551:2003 Inland navigation vessels – Vocabulary

  • EN 13553:2002 Resilient floor coverings – Polyvinyl chloride floor coverings for use in special wet areas – Specification

  • EN 13555:2004 Flanges and their joints – Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

  • EN 13561:2004+A1:2008 External blinds – Performance requirements including safety

  • EN 13573:2009 Inland navigation vessels – Anchoring, coupling, towing, hauling and mooring systems

  • EN 13574:2001 Inland navigation vessels – Permanently installed climbing devices with a length not exceeding 5 m

  • EN 13577:2007 Chemical attack on concrete – Determination of aggressive carbon dioxide content in water

  • EN 13578:2003 Products and systems for the protection and repair of concrete structure – Test Method – Compatibility on wet concrete

  • EN 13579:2002 Products and systems for the protection and repair of concrete structures – Test methods – Drying test for hydrophobic impregnation

  • EN 13580:2002 Products and systems for the protection and repair of concrete structures – Test Methods – Water absorption and resistance to alkali for hydrophobic impregnations

  • EN 13581:2002 Products and systems for the protection and repair of concrete structures – Test method – Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress

  • EN 13584:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of creep in compression for repair products

  • EN 13599:2002 Copper and copper alloys – Copper plate, sheet and strip for electrical purposes

  • EN 136:1998 Respiratory protective devices – Full face masks – Requirements, testing, marking

  • EN 136:1998/AC:2003 Respiratory protective devices – Full face masks – Requirements, testing, marking

  • EN 13600:2013 Copper and copper alloys – Seamless copper tubes for electrical purposes

  • EN 13601:2013 Copper and copper alloys – Copper rod, bar and wire for general electrical purposes

  • EN 13602:2013 Copper and copper alloys – Drawn, round copper wire for the manufacture of electrical conductors

  • EN 13603:2013 Copper and copper alloys – Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes

  • EN 13604:2013 Copper and copper alloys – Semiconductor devices, electronic and vacuum products made from high conductivity copper

  • EN 13605:2013 Copper and copper alloys – Copper profiles and profiled wire for electrical purposes

  • EN 13611:2007+A2:2011 Safety and control devices for gas burners and gas burning appliances – General requirements

  • EN 13613:2009 Roller sports equipment – Skateboards – Safety requirements and tests methods

  • EN 13622:2002 Gas welding equipment – Terminology – Terms used for gas welding equipment

  • EN 13625:2001 Non-destructive testing – Leak test – Guide to the selection of instrumentation for the measurement of gas leakage

  • EN 1363-1:2012 Fire resistance tests – Part 1: General Requirements

  • EN 1363-2:1999 Fire resistance tests – Part 2: Alternative and additional procedures

  • EN 13639:2002 Determination of total organic carbon in limestone

  • EN 13639:2002/AC:2004 Determination of total organic carbon in limestone

  • EN 1364-1:1999 Fire resistance tests for non-loadbearing elements – Part 1: Walls

  • EN 1364-2:1999 Fire resistance tests for non-loadbearing elements – Part 2: Ceilings

  • EN 1364-3:2006 Fire resistance tests for non-loadbearing elements – Part 3: Curtain walling – Full configuration (complete assembly)

  • EN 1364-4:2007 Fire resistance tests for non-loadbearing elements – Part 4: Curtain walling – Part configuration

  • EN 13645:2001 Installations and equipment for liquefied natural gas – Design of onshore installations with a storage capacity between 5 t and 200 t

  • EN 1365-1:2012 Fire resistance tests for loadbearing elements – Part 1: Walls

  • EN 1365-1:2012/AC:2013 Fire resistance tests for loadbearing elements – Part 1: Walls

  • EN 1365-2:1999 Fire resistance tests for loadbearing elements – Part 2: Floors and roofs

  • EN 1365-3:1999 Fire resistance tests for loadbearing elements – Part 3: Beams

  • EN 1365-4:1999 Fire resistance tests for loadbearing elements – Part 4: Columns

  • EN 13654-1:2001 Soil improvers and growing media – Determination of nitrogen – Part 1: Modified Kjeldahl method

  • EN 13654-2:2001 Soil improvers and growing media – Determination of nitrogen – Part 2: Dumas method

  • EN 1365-5:2004 Fire resistance tests for loadbearing elements – Part 5: Balconies and walkways

  • EN 1365-6:2004 Fire resistance tests for loadbearing elements – Part 6: Stairs

  • EN 13659:2004+A1:2008 Shutters – Performance requirements including safety

  • EN 1366-1:1999 Fire resistance tests for service installations – Part 1: Ducts

  • EN 1366-10:2011 Fire resistance tests for service installations – Part 10: Smoke control dampers

  • EN 1366-2:1999 Fire resistance tests for service installations – Part 2: Fire dampers

  • EN 1366-3:2009 Fire resistance tests for service installations – Part 3: Penetration seals

  • EN 1366-4:2006+A1:2010 Fire resistance tests for service installations – Part 4: Linear joint seals

  • EN 1366-5:2010 Fire resistance tests for service installations – Part 5: Service ducts and shafts

  • EN 1366-6:2004 Fire resistance tests for service installations – Part 6: Raised access and hollow core floors

  • EN 1366-7:2004 Fire resistance tests for service installations – Part 7: Conveyor systems and their closures

  • EN 1366-8:2004 Fire resistance tests for service installations – Part 8: Smoke extraction ducts

  • EN 1366-9:2008 Fire resistance tests for service installations – Part 9: Single compartment smoke extraction ducts

  • EN 13670:2009 Execution of concrete structures

  • EN 13687-1:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 1: Freeze-thaw cycling with de-icing salt immersion

  • EN 13687-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 2: Thunder-shower cycling (thermal shock)

  • EN 13687-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 3: Thermal cycling without de-icing salt impact

  • EN 13687-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 4: Dry thermal cycling

  • EN 13687-5:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 5: Resistance to temperature shock

  • EN 13698-1:2003 Pallet production specification – Part 1: Construction specification for 800 mm x 1200 mm flat wooden pallets

  • EN 13698-2:2009 Pallet production specification – Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets

  • EN 137:2006 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking

  • EN 13709:2010 Industrial valves – Steel globe and globe stop and check valves

  • EN 13711:2002 Inland navigation vessels – Winches for ship operation – Safety requirements

  • EN 13720:2002 Transportable gas cylinders – Filling conditions for acetylene battery vehicles

  • EN 13723:2002 Petroleum products – Determination of low lead contents in gasolines – Wavelength-dispersive X-ray fluorescence spectrometry (XRF)

  • EN 13733:2002 Products and systems for the protection and repair of concrete structures – Tests methods – Determination of the durability of structural bonding agents

  • EN 13741:2003 Thermal performance acceptance testing of mechanical draught series wet cooling towers

  • EN 13763-17:2003 Explosives for civil uses – Detonators and relays – Part 17: Determination of no-fire current of electric detonators

  • EN 13763-18:2003 Explosives for civil uses – Detonators and relays – Part 18: Determination of series firing current of electric detonators

  • EN 13763-21:2003 Explosives for civil uses – Detonators and relays – Part 21: Determination of flash-over voltage of electric detonators

  • EN 13763-22:2003 Explosives for civil uses – Detonators and relays – Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires

  • EN 13763-23:2002 Explosives for civil uses – Detonators and relays – Part 23: Determination of the shock-wave velocity of shock tube

  • EN 13763-24:2002 Explosives for civil uses – Detonators and relays – Part 24: Determination of the electrical non-conductivity of shock tube

  • EN 13763-25:2004 Explosives for civil uses – Detonators and relays – Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories

  • EN 13763-26:2004 Explosives for civil uses – Detonators and relays – Part 26: Definitions, methods, and requirements for devices and accessories for reliable and safe function of detonators and relays

  • EN 13771-1:2003 Compressors and condensing units for refrigeration – Performance testing and test methods – Part 1: Refrigerant compressors

  • EN 13771-2:2007 Compressors and condensing units for refrigeration – Performance testing and test methods – Part 2: Condensing units

  • EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar – Performance requirements

  • EN 13789:2010 Industrial valves – Cast iron globe valves

  • EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components

  • EN 13793:2003 Thermal insulating products for building applications – Determination of behaviour under cyclic loading

  • EN 13794:2002 Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking

  • EN 138:1994 Respiratory protective devices – Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly – Requirements, testing, marking

  • EN 1380:2009 Timber structures – Test methods – Load bearing nails, screws, dowels and bolts

  • EN 13807:2003 Transportable gas cylinders – Battery vehicles – Design, manufacture, identification and testing

  • EN 13807:2003/AC:2005 Transportable gas cylinders – Battery vehicles – Design, manufacture, identification and testing

  • EN 1381:1999 Timber structures – Test methods – Load bearing stapled joints

  • EN 13810-1:2002 Wood-based panels – Floating floors – Part 1: Performance specifications and requirements

  • EN 1382:1999 Timber structures – Test methods – Withdrawal capacity of timber fasteners

  • EN 13820:2003 Thermal insulating materials for building applications – Determination of organic content

  • EN 13823:2010 Reaction to fire tests for building products – Building products excluding floorings exposed to the thermal attack by a single burning item

  • EN 13829:2000 Thermal performance of buildings – Determination of air permeability of buildings – Fan pressurization method (ISO 9972:1996, modified)

  • EN 1383:1999 Timber structures – Test methods – Pull through resistance of timber fasteners

  • EN 13830:2003 Curtain walling – Product standard

  • EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water

  • EN 13836:2006 Gas fired central heating boilers – Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW

  • EN 13842:2004 Oil fired forced convection air heaters – Stationary and transportable for space heating

  • EN 13843:2009 Roller sports equipment – Inline-skates – Safety requirements and test methods

  • EN 13845:2005 Resilient floor coverings – Polyvinyl chloride floor coverings with particle based enhanced slip resistance – Specification

  • EN 1386:2007 Aluminium and aluminium alloys – Tread plate – Specifications

  • EN 13861:2011 Safety of machinery – Guidance for the application of ergonomics standards in the design of machinery

  • EN 13863-2:2003 Concrete pavements – Part 2: Test method for the determination of the bond between two layers

  • EN 13879:2002 Wood-based panels – Determination of edgewise bending properties

  • EN 13880-10:2003 Hot applied joint sealants – Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression

  • EN 13880-7:2003 Hot applied joint sealants – Part 7: Function testing of joint sealants

  • EN 13880-8:2003 Hot applied joint sealants – Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

  • EN 13880-9:2003 Hot applied joint sealants – Part 9: Test method for the determination of compatibility with asphalt pavements

  • EN 13888:2009 Grout for tiles – Requirements, evaluation of conformity, classification and designation

  • EN 13890:2009 Workplace exposure – Procedures for measuring metals and metalloids in airborne particles – Requirements and test methods

  • EN 13893:2002 Resilient, laminate and textile floor coverings – Measurement of dynamic coefficient of friction on dry floor surfaces

  • EN 13894-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of fatigue under dynamic loading – Part 1: During cure

  • EN 13894-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of fatigue under dynamic loading – Part 2: After hardening

  • EN 13899:2003 Roller sports equipment – Roller skates – Safety requirements and test methods

  • EN 1390:2006 Wood preservatives – Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae – Laboratory method

  • EN 13914-1:2005 Design, preparation and application of external rendering and internal plastering – External rendering

  • EN 13914-2:2005 Design, preparation and application of external rendering and internal plastering – Part 2: Design considerations and essential principles for internal plastering

  • EN 13920-1:2003 Aluminium and aluminium alloys – Scrap – Part 1: General requirements, sampling and tests

  • EN 13920-10:2003 Aluminium and aluminium alloys – Scrap – Part 10: Scrap consisting of used aluminium beverage cans

  • EN 13920-11:2003 Aluminium and aluminium alloys – Scrap – Part 11: Scrap consisting of aluminium-copper radiators

  • EN 13920-12:2003 Aluminium and aluminium alloys – Scrap – Part 12: Turnings consisting of one single alloy

  • EN 13920-13:2003 Aluminium and aluminium alloys – Scrap – Part 13: Mixed turnings consisting of two or more alloys

  • EN 13920-14:2003 Aluminium and aluminium alloys – Scrap – Part 14: Scrap from post-consumer aluminium packagings

  • EN 13920-15:2003 Aluminium and aluminium alloys – Scrap – Part 15: Decoated aluminium scrap from post-consumer aluminium packagings

  • EN 13920-16:2003 Aluminium and aluminium alloys – Scrap – Part 16: Scrap consisting of skimmings, drosses, spills and metallics

  • EN 13920-2:2003 Aluminium and aluminium alloys – Scrap – Part 2: Unalloyed aluminium scrap

  • EN 13920-3:2003 Aluminium and aluminium alloys – Scrap – Part 3: Wire and cable scrap

  • EN 13920-4:2003 Aluminium and aluminium alloys – Scrap – Part 4: Scrap consisting of one single wrought alloy

  • EN 13920-5:2003 Aluminium and aluminium alloys – Scrap – Part 5: Scrap consisting of two or more wrought alloys of the same series

  • EN 13920-6:2003 Aluminium and aluminium alloys – Scrap – Part 6: Scrap consisting of two or more wrought alloys

  • EN 13920-7:2003 Aluminium and aluminium alloys – Scrap – Part 7: Scrap consisting of castings

  • EN 13920-8:2003 Aluminium and aluminium alloys – Scrap – Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes

  • EN 13920-9:2003 Aluminium and aluminium alloys – Scrap – Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials

  • EN 13921:2007 Personal protective equipment – Ergonomic principles

  • EN 13925-1:2003 Non-destructive testing – X-ray diffraction from polycrystalline and amorphous material – Part 1: General principles

  • EN 13925-2:2003 Non-destructive testing – X-ray diffraction from polycrystalline and amorphous materials – Part 2: Procedures

  • EN 13925-3:2005 Non destructive testing – X ray diffraction from polycrystalline and amorphous materials – Part 3: Instruments

  • EN 13927:2003 Non-destructive testing – Visual testing – Equipment

  • EN 13941:2009+A1:2010 Design and installation of preinsulated bonded pipe systems for district heating

  • EN 13942:2009 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves (ISO 14313:2007 modified)

  • EN 13942:2009/AC:2009 Petroleum and natural gas industries – Pipeline transportation systems – Pipeline valves (ISO 14313:2007 modified/Cor 1:2009)

  • EN 13949:2003 Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking

  • EN 1395-7:2007 Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 7: Powder feed systems

  • EN 13957:2008 Aluminium and aluminium alloys – Extruded round, coiled tube for general applications – Specification

  • EN 13958:2008 Aluminium and aluminium alloys – Cold drawn, round, coiled tube for general applications – Specification

  • EN 1396:2007 Aluminium and aluminium alloys – Coil coated sheet and strip for general applications – Specifications

  • EN 1397:1998 Heat exchangers – Hydronic room fan coil units – Test procedures for establishing the performance

  • EN 1398:2009 Dock levellers – Safety requirements

  • EN 13981-1:2003 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 1: Extruded products

  • EN 13981-2:2004 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 2: Plates and sheets

  • EN 13981-3:2006 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 3: Castings

  • EN 13981-4:2006 Aluminium and aluminium alloys – Products for structural railway applications – Technical conditions for inspection and delivery – Part 4: Forgings

  • EN 13986:2004 Wood-based panels for use in construction – Characteristics, evaluation of conformity and marking

  • EN 1399:1997 Resilient floor coverings – Determination of resistance to stubbed and burning cigarettes

  • EN 1399:1997/AC:1998 Resilient floor coverings – Determination of resistance to stubbed and burning cigarettes

  • EN 140:1998 Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking

  • EN 140:1998/AC:1999 Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking

  • EN 14010:2003+A1:2009 Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages

  • EN 1401-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for pipes, fittings and the system

  • EN 14017:2005+A2:2009 Agricultural and forestry machinery – Solid fertilizer distributors – Safety

  • EN 14018:2005+A1:2009 Agricultural and forestry machinery – Seed drills – Safety

  • EN 14019:2004 Curtain Walling – Impact resistance – Performance requirements

  • EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods

  • EN 14024:2004 Metal profiles with thermal barrier – Mechanical performance – Requirements, proof and tests for assessment

  • EN 14031:2003 Workplace atmospheres – Determination of airborne endotoxins

  • EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds – Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

  • EN 14037-1:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C – Part 1: Technical specifications and requirements

  • EN 14037-2:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C – Part 2: Test method for thermal output

  • EN 14037-3:2003 Ceiling mounted radiant panels supplied with water at temperature below 120 °C – Part 3: Rating method and evaluation of radiant thermal output

  • EN 14041:2004 Resilient, textile and laminate floor coverings – Essential characteristics

  • EN 14041:2004/AC:2006 Resilient, textile and laminate floor coverings – Essential characteristics

  • EN 14042:2003 Workplace atmospheres – Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents

  • EN 14052:2012+A1:2012 High performance industrial helmets

  • EN 14055:2010 WC and urinal flushing cisterns

  • EN 14058:2004 Protective clothing – Garments for protection against cool environments

  • EN 14063-1:2004 Thermal insulation products for buildings – In-situ formed expanded clay lightweight aggregate products – Part 1: Specification for the loose-fill products before installation

  • EN 14063-1:2004/AC:2006 Thermal insulation products – In-situ formed expanded clay lightweight aggregate products – Part 1: Specification for the loose-fill products before installation

  • EN 14063-2:2013 Thermal insulation products for buildings – In-situ formed expanded clay lightweight aggregate products – Part 2: Specification for the installed products

  • EN 14064-1:2010 Thermal insulation products for buildings – In-situ formed loose-fill mineral wool (MW) products – Part 1: Specification for the loose-fill products before installation

  • EN 14064-2:2010 Thermal insulation products for buildings – In-situ formed loose-fill mineral wool (MW) products – Part 2: Specification for the installed products

  • EN 14067-4:2013 Railway applications – Aerodynamics – Part 4: Requirements and test procedures for aerodynamics on open track

  • EN 14068:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of watertightness of injected cracks without movement in concrete

  • EN 14070:2003+A1:2009 Safety of machine tools – Transfer and special-purpose machines

  • EN 14070:2003+A1:2009/AC:2010 Safety of machine tools – Transfer and special-purpose machines

  • EN 14077:2003 Petroleum products – Determination of organic halogen content – Oxidative microcoulometric method

  • EN 14078:2009 Liquid petroleum products – Determination of fatty acid methyl ester (FAME) content in middle distillates – Infrared spectrometry method

  • EN 14080:2013 Timber structures – Glued laminated timber and glued solid timber – Requirements

  • EN 14081-1:2005+A1:2011 Timber structures – Strength graded structural timber with rectangular cross section – Part 1: General requirements

  • EN 14081-2:2010+A1:2012 Timber structures – Strength graded structural timber with rectangular cross section – Part 2: Machine grading; additional requirements for initial type testing

  • EN 14081-3:2012 Timber structures – Strength graded structural timber with rectangular cross section – Part 3: Machine grading; additional requirements for factory production control

  • EN 14081-4:2009 Timber structures – Strength graded structural timber with rectangular cross section – Part 4: Machine grading – Grading machine settings for machine controlled systems

  • EN 14085:2010 Resilient floor coverings – Specification for floor panels for loose laying

  • EN 14096-1:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

  • EN 14096-2:2003 Non-destructive testing – Qualification of radiographic film digitisation systems – Part 2: Minimum requirements

  • EN 1411:1996 Plastics piping and ducting systems – Thermoplastics pipes – Determination of resistance to external blows by the staircase method

  • EN 14114:2002 Hygrothermal performance of building equipment and industrial installations – Calculation of water vapour diffusion – Cold pipe insulation systems

  • EN 14117:2004 Products systems for the protection and repair of concrete structures – Test methods – Determination of time of efflux of cementitious injection products

  • EN 1412:1995 Copper and copper alloys – European numbering system

  • EN 14120:2003+A1:2007 Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods

  • EN 14121:2009 Aluminium and aluminium alloys – Sheet, strip and plate for electrotechnical applications

  • EN 14124:2004 Inlet valves for flushing cisterns with internal overflow

  • EN 14126:2003 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents

  • EN 14126:2003/AC:2004 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents

  • EN 14127:2011 Non-destructive testing – Ultrasonic thickness measurement

  • EN 14128:2003 Durability of wood and wood-based products – Performance criteria for curative wood preservatives as determined by biological tests

  • EN 14134:2004 Ventilation for buildings – Performance testing and installation checks of residential ventilation systems

  • EN 14135:2004 Coverings – Determination of fire protection ability

  • EN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures

  • EN 14141:2013 Valves for natural gas transportation in pipelines – Performance requirements and tests

  • EN 14143:2013 Respiratory equipment – Self-contained re-breathing diving apparatus

  • EN 14144:2003 Lifebuoys – Requirements, tests

  • EN 14145:2003 Holders for lifebuoys

  • EN 14154-1:2005+A2:2011 Water meters – Part 1: General requirements

  • EN 14154-2:2005+A2:2011 Water meters – Part 2: Installation and conditions of use

  • EN 14154-3:2005+A2:2011 Water meters – Part 3: Test methods and equipment

  • EN 14161:2011 Petroleum and natural gas industries – Pipeline transportation systems (ISO 13623:2009 modified)

  • EN 14163:2001 Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines (ISO 13847:2000 modified)

  • EN 14163:2001/AC:2006 Petroleum and natural gas industries – Pipeline transportation systems – Welding of pipelines (ISO 13847:2000 modified)

  • EN 1417:1996+A1:2008 Plastics and rubber machines – Two roll mills – Safety requirements

  • EN 1417:1996+A1:2008/AC:2009 Plastics and rubber machines – Two roll mills – Safety requirements

  • EN 14178-1:2004 Glass in building – Basic alkaline earth silicate glass products – Part 1: Float glass

  • EN 14178-2:2004 Glass in building – Basic alkaline earth silicate glass products – Part 2: Evaluation of conformity/Product standard

  • EN 14179-1:2005 Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 1: Definition and description

  • EN 14179-2:2005 Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard

  • EN 14180:2003+A2:2009 Sterilizers for medical purposes – Low temperature steam and formaldehyde sterilizers – Requirements and testing

  • EN 14183:2003 Step stools

  • EN 14187-7:2003 Cold applied joint sealants – Part 7: Test method for the determination of the resistance to flame

  • EN 14187-8:2003 Cold applied joint sealants – Part 8: Test method for the determination of the artificial weathering by UV-irradiation

  • EN 14187-9:2006 Cold applied joint sealants – Test methods – Part 9: Function testing of joint sealants

  • EN 142:2002 Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking

  • EN 1420-1:1999 Influence of organic materials on water intended for human consumption – Determination of odour and flavour assessment of water in piping systems – Part 1: Test method

  • EN 14201:2004 Blinds and shutters – Resistance to repeated operations (mechanical endurance) – Methods of testing

  • EN 14202:2004 Blinds and shutters – Suitability for use of tubular and square motorizations – Requirements and test methods

  • EN 14203:2004 Blinds and shutters – Capability for use of gears with crank handle – Requirements and test methods

  • EN 14206:2003 Inland navigation vessels – Gangways for passenger vessels – Requirements, tests

  • EN 14208:2004 Transportable gas cylinders – Specification for welded pressure drums up to 1000 litre capacity for the transport of gases – Design and construction

  • EN 14214:2012 Liquid petroleum products – Fatty acid methyl esters (FAME) for use in diesel engines and heating applications – Requirements and test methods

  • EN 14215:2013 Textile floor coverings – Classification of machine-made pile rugs and runners

  • EN 14216:2004 Cement – Composition, specifications and conformity criteria for very low heat special cements

  • EN 1422:1997+A1:2009 Sterilizers for medical purposes – Ethylene oxide sterilizers – Requirements and test methods

  • EN 14225-1:2005 Diving suits – Part 1: Wet suits – Requirements and test methods

  • EN 14225-2:2005 Diving suits – Part 2: Dry suits – Requirements and test methods

  • EN 14225-3:2005 Diving suits – Part 3: Actively heated or cooled suits (systems) – Requirements and test methods

  • EN 14225-4:2005 Diving suits – Part 4: One atmosphere suits (ADS) – Human factors requirements and test methods

  • EN 14227-10:2006 Hydraulically bound mixtures – Specifications – Part 10: Soil treated by cement

  • EN 14229:2010 Structural timber – Wood poles for overhead lines

  • EN 14238:2004+A1:2009 Cranes – Manually controlled load manipulating devices

  • EN 14239:2004 Ventilation for buildings – Ductwork – Measurement of ductwork surface area

  • EN 14240:2004 Ventilation for buildings – Chilled ceilings – Testing and rating

  • EN 14242:2004 Aluminium and aluminium alloys – Chemical analysis – Inductively coupled plasma optical emission spectral analysis

  • EN 14250:2010 Timber structures – Product requirements for prefabricated structural members assembled with punched metal plate fasteners

  • EN 14251:2003 Structural round timber – Test methods

  • EN 14254:2004 In vitro diagnostic medical devices – Single-use receptacles for the collection of specimens, other than blood, from humans

  • EN 14272:2011 Plywood – Calculation method for some mechanical properties

  • EN 14274:2013 Automotive fuels – Assessment of petrol and diesel quality – Fuel quality monitoring system (FQMS)

  • EN 14274:2013/AC:2013 Automotive fuels – Assessment of petrol and diesel quality – Fuel quality monitoring system (FQMS)

  • EN 14275:2013 Automotive fuels – Assessment of petrol and diesel fuel quality – Sampling from retail site pumps and commercial site fuel dispensers

  • EN 14277:2006 Ventilation for buildings – Air terminal devices – Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes

  • EN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) – Definitions, classification and specifications

  • EN 14286:2008 Aluminium and aluminium alloys – Weldable rolled products for tanks for the storage and transportation of dangerous goods

  • EN 14287:2004 Aluminium and aluminium alloys – Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components

  • EN 14291:2004 Foam producing solutions for leak detection on gas installations

  • EN 14296:2005 Sanitary appliances – Communal washing troughs

  • EN 143:2000 Respiratory protective devices – Particle filters – Requirements, testing, marking

  • EN 143:2000/A1:2006 Respiratory protective devices – Particle filters – Requirements, testing, marking

  • EN 143:2000/AC:2005 Respiratory protective devices – Particle filters – Requirements, testing, marking

  • EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made mineral wool (MW) products – Specification

  • EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made flexible elastomeric foam (FEF) products – Specification

  • EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made cellular glass (CG) products – Specification

  • EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made calcium silicate (CS) products – Specification

  • EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made extruded polystyrene foam (XPS) products – Specification

  • EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products – Specification

  • EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made products of expanded polystyrene (EPS) – Specification

  • EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made polyethylene foam (PEF) products – Specification

  • EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations – Factory made phenolic foam (PF) products – Specification

  • EN 14315-1:2013 Thermal insulating products for buildings – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 1: Specification for the rigid foam spray system before installation

  • EN 14315-2:2013 Thermal insulating products for buildings – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 2: Specification for the installed insulation products

  • EN 14316-1:2004 Thermal insulation products for buildings – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 14316-2:2007 Thermal insulating products for buildings – In-situ thermal insulation formed from expanded perlite (EP) products – Part 2: Specification for the installed products

  • EN 14317-1:2004 Thermal insulation products for buildings – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 14317-2:2007 Thermal insulation products for buildings – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 2: Specification for the installed products

  • EN 14318-1:2013 Thermal insulating products for buildings – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 1: Specification for the rigid foam dispensed system before installation

  • EN 14318-2:2013 Thermal insulating products for buildings – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products – Part 2: Specification for the installed insulation products

  • EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 1: Specification for the rigid foam dispensed system before installation

  • EN 14319-2:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 2: Specification for the installed insulation products

  • EN 1432:1997 Swap bodies – Swap tanks – Dimensions, requirements, test methods, operation conditions

  • EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 1: Specification for the rigid foam spray system before installation

  • EN 14320-2:2013 Thermal insulating products for building equipment and industrial installations – In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products – Part 2: Specification for the installed insulation products

  • EN 14321-1:2005 Glass in building – Thermally toughened alkaline earth silicate safety glass – Part 1: Definition and description

  • EN 14321-2:2005 Glass in building – Thermally toughened alkaline earth silicate safety glass – Part 2: Evaluation of conformity/Product standard

  • EN 14322:2004 Wood-based panels – Melamine faced boards for interior uses – Definition, requirements and classification

  • EN 14323:2004 Wood-based panels – Melamine faced boards for interior uses – Test methods

  • EN 14324:2004 Brazing – Guidance on the application of brazed joints

  • EN 14325:2004 Protective clothing against chemicals – Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages

  • EN 14328:2005 Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods

  • EN 14329:2004 Inland navigation vessels – Installation of berths and loading areas

  • EN 14330:2003 Inland navigation vessels – Studless anchor chain – Round steel link chain

  • EN 14331:2004 Liquid petroleum products – Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates – Liquid chromatography (LC)/gas chromatography (GC) method

  • EN 14341:2006 Industrial valves – Steel check valves

  • EN 14351-1:2006+A1:2010 Windows and doors – Product standard, performance characteristics – Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

  • EN 14354:2004 Wood-based panels – Wood veneer floor covering

  • EN 14354:2004/AC:2006 Wood-based panels – Wood veneer floor covering

  • EN 14358:2006 Timber structures – Calculation of characteristic 5-percentile values and acceptance criteria for a sample

  • EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications

  • EN 14360:2004 Protective clothing against rain – Test method for ready made garments – Impact from above with high energy droplets

  • EN 14361:2004 Aluminium and aluminium alloys – Chemical analysis – Sampling from metal melts

  • EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Specifications for pipes, fittings and joints

  • EN 14366:2004 Laboratory measurement of noise from waste water installations

  • EN 14367:2005 Non controllable backflow preventer with different pressure zones – Family C, type A

  • EN 14374:2004 Timber structures – Structural laminated veneer lumber – Requirements

  • EN 14387:2004+A1:2008 Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking

  • EN 14390:2007 Fire test – Large-scale room reference test for surface products

  • EN 14392:2007 Aluminium and aluminium alloys – Requirements for anodised products for use in contact with foodstuff

  • EN 14394:2005+A1:2008 Heating boilers – Heating boilers with forced draught burners – Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C

  • EN 14395-1:2004 Influence of organic materials on water intended for human consumption – Organoleptic assessment of water in storage systems – Part 1: Test method

  • EN 14399-10:2009 High-strength structural bolting assemblies for preloading – Part 10: System HRC – Bolt and nut assemblies with calibrated preload

  • EN 14399-7:2007 High-strength structural bolting assemblies for preloading – Part 7: System HR – Countersunk head bolt and nut assemblies

  • EN 14399-8:2007 High-strength structural bolting assemblies for preloading – Part 8: System HV – Hexagon fit bolt and nut assemblies

  • EN 14399-9:2009 High-strength structural bolting assemblies for preloading – Part 9: System HR or HV – Direct tension indicators for bolt and nut assemblies

  • EN 14404:2004+A1:2010 Personal protective equipment – Knee protectors for work in the kneeling position

  • EN 14406:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the expansion ratio and expansion evolution

  • EN 144-1:2000 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

  • EN 144-1:2000/A1:2003 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

  • EN 144-1:2000/A2:2005 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

  • EN 14411:2012 Ceramic tiles – Definitions, classification, characteristics, evaluation of conformity and marking

  • EN 14419:2009 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Surveillance systems

  • EN 144-2:1998 Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections

  • EN 14420-7:2013 Hose fittings with clamp units – Part 7: Cam locking couplings

  • EN 14420-8:2013 Hose fittings with clamp units – Part 8: Symmetrical half coupling (Guillemin system)

  • EN 14428:2004+A1:2008 Shower enclosures – Functional requirements and test methods

  • EN 144-3:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen

  • EN 144-3:2003/AC:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen

  • EN 14435:2004 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking

  • EN 14436:2004 Copper and copper alloys – Electrolytically tinned strip

  • EN 14437:2004 Determination of the uplift resistance of installed clay or concrete tiles for roofing – Roof system test method

  • EN 14438:2006 Gas-fired insets for heating more than one room

  • EN 14439:2006+A2:2009 Cranes – Safety – Tower cranes

  • EN 1444:2000 Fibre-cement pipelines – Guide for laying and on-site work practices

  • EN 14449:2005 Glass in building – Laminated glass and laminated safety glass – Evaluation of conformity/Product standard

  • EN 14449:2005/AC:2005 Glass in building – Laminated glass and laminated safety glass – Evaluation of conformity/Product standard

  • EN 14451:2005 Devices to prevent pollution by backflow of potable water – In-line anti-vacuum valves DN 8 to DN 80 – Family D, type A

  • EN 14452:2005 Devices to prevent pollution by backflow of potable water – Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 – Family D, type B

  • EN 14453:2005 Devices to prevent pollution by backflow of potable water – Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 – Family D, type C

  • EN 14454:2005 Devices to prevent pollution by backflow of potable water – Hose union backflow preventer DN 15 to DN 32 – Family H, type A

  • EN 14455:2005 Devices to prevent pollution by backflow of potable water – Presssurised air inlet valves DN 15 to DN 50 – Family L, type A and type B

  • EN 14458:2004 Personal eye-equipment – Faceshields and visors for use with firefighters’ and high performance industrial safety helmets used by firefighters, ambulance and emergency services

  • EN 14459:2007 Control functions in electronic systems for gas burners and gas burning appliances – Methods for classification and assessment

  • EN 14459:2007/AC:2009 Control functions in electronic systems for gas burners and gas burning appliances – Methods for classification and assessment

  • EN 14468-1:2004 Table tennis – Part 1: Table tennis tables, functional and safety requirements, test methods

  • EN 14468-2:2005 Table tennis – Part 2: Posts for net assemblies – Requirements and test methods

  • EN 1447:2009+A1:2010 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of long-term resistance to internal pressure

  • EN 14487-1:2005 Sprayed concrete – Part 1: Definitions, specifications and conformity

  • EN 14487-2:2006 Sprayed concrete – Part 2: Execution

  • EN 14488-1:2005 Testing sprayed concrete – Sampling fresh and hardened concrete

  • EN 14488-2:2006 Testing sprayed concrete – Part 2: Compressive strength of young sprayed concrete

  • EN 14488-3:2006 Testing sprayed concrete – Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

  • EN 14488-4:2005+A1:2008 Testing sprayed concrete – Part 4: Bond strength of cores by direct tension

  • EN 14488-5:2006 Testing sprayed concrete – Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens

  • EN 14488-6:2006 Testing sprayed concrete – Part 6: Thickness of concrete on a substrate

  • EN 14488-7:2006 Testing sprayed concrete – Part 7: Fibre content of fibre reinforced concrete

  • EN 14492-1:2006+A1:2009 Cranes – Power driven winches and hoists – Part 1: Power driven winches

  • EN 14492-1:2006+A1:2009/AC:2010 Cranes – Power driven winches and hoists – Part 1: Power driven winches

  • EN 14492-2:2006+A1:2009 Cranes – Power driven winches and hoists – Part 2: Power driven hoists

  • EN 14492-2:2006+A1:2009/AC:2010 Cranes – Power driven winches and hoists – Part 2: Power driven hoists

  • EN 14497:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the filtration stability

  • EN 14497:2004/AC:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the filtration stability

  • EN 14498:2004 Products and systems for the protection and repair of concrete structures – Test methods – Volume and weight changes of injection products after air drying and water storage cycles

  • EN 14499:2004 Textile floor coverings – Minimum requirements for carpet underlays

  • EN 145:1997 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking

  • EN 145:1997/A1:2000 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking

  • EN 14500:2008 Blinds and shutters – Thermal and visual comfort – Test and calculation methods

  • EN 14501:2005 Blinds and shutters – Thermal and visual comfort – Performance characteristics and classification

  • EN 14502-1:2010 Cranes – Equipment for the lifting of persons – Part 1: Suspended baskets

  • EN 14502-2:2005+A1:2008 Cranes – Equipment for the lifting of persons – Part 2: Elevating control stations

  • EN 14503:2003 Inland navigation vessels – Harbours for inland navigation

  • EN 14504:2009 Inland navigation vessels – Floating landing stages – Requirements, tests

  • EN 14509:2013 Self-supporting double skin metal faced insulating panels – Factory made products – Specifications

  • EN 1451-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) – Part 1: Specifications for pipes, fittings and the system

  • EN 14511-1:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 1: Terms, definitions and classification

  • EN 14511-2:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 2: Test conditions

  • EN 14511-3:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 3: Test methods

  • EN 14511-4:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling – Part 4: Operating requirements, marking and instructions

  • EN 14513:2005 Transportable gas cylinders – Bursting disc pressure relief devices (excluding acetylene gas cylinders)

  • EN 14516:2006+A1:2010 Baths for domestic purposes

  • EN 14518:2005 Ventilation for buildings – Chilled beams – Testing and rating of passive chilled beams

  • EN 14521:2004 Resilient floor coverings – Specification for smooth rubber floor coverings with or without foam backing with a decorative layer

  • EN 14527:2006+A1:2010 Shower trays for domestic purposes

  • EN 14528:2007 Bidets – Functional requirements and test methods

  • EN 14529:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

  • EN 14530:2004 Workplace atmospheres – Determination of diesel particulate matter – General requirements

  • EN 1453-1:2000 Plastics piping systems with structured wall-pipes for soil and waste discharge (low and high temperature) inside buildings – Unplasticized poly(vinyl chloride) (PVC-U) – Part 1: Specifications for pipes and the system

  • EN 14532-1:2004 Welding consumables – Test methods and quality requirements – Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys

  • EN 14532-2:2004 Welding consumables – Test methods and quality requirements – Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys

  • EN 14532-3:2004 Welding consumables – Test methods and quality requirements – Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys

  • EN 14538:2006 Fat and oil derivatives – Fatty acid methyl ester (FAME) – Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)

  • EN 14545:2008 Timber structures – Connectors – Requirements

  • EN 1455-1:1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Acrylonitrile-butadiene-styrene (ABS) – Part 1: Requirements for pipes, fittings and the system

  • EN 14565:2004 Resilient floor coverings – Floor coverings based upon synthetic thermoplastic polymers – Specification

  • EN 14583:2004 Workplace atmospheres – Volumetric bioaerosol sampling devices – Requirements and test methods

  • EN 14584:2013 Non-destructive testing – Acoustic emission testing – Examination of metallic pressure equipment during proof testing – Planar location of AE sources

  • EN 1459:1998+A3:2012 Safety of industrial trucks – Self-propelled variable reach trucks

  • EN 14592:2008+A1:2012 Timber structures – Dowel-type fasteners – Requirements

  • EN 14593-1:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking

  • EN 14593-2:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 2: Apparatus with a half mask at positive pressure – Requirements, testing, marking

  • EN 14593-2:2005/AC:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 2: Apparatus with a half mask at positive pressure – Requirements, testing, marking

  • EN 14594:2005 Respiratory protective devices – Continuous flow compressed air line breathing apparatus – Requirements, testing, marking

  • EN 14594:2005/AC:2005 Respiratory protective devices – Continuous flow compressed air line breathing apparatus – Requirements, testing, marking

  • EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics – Requirements and classification

  • EN 14604:2005 Smoke alarm devices

  • EN 14604:2005/AC:2008 Smoke alarm devices

  • EN 14605:2005+A1:2009 Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

  • EN 14606:2004 Inland navigation vessels – Studless anchor chain – Accessories

  • EN 14608:2004 Windows – Determination of the resistance to racking

  • EN 14609:2004 Windows – Determination of the resistance to static torsion

  • EN 14610:2004 Welding and allied processes – Definitions of metal welding processes

  • EN 14617-16:2005 Agglomerated stone – Test methods – Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles

  • EN 14617-8:2007 Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)

  • EN 14617-9:2005 Agglomerated stone – Test methods – Part 9: Determination of impact resistance

  • EN 14619:2004 Roller sports equipment – Kick scooters – Safety requirements and test methods

  • EN 1462:2004 Brackets for eaves gutters – Requirements and testing

  • EN 14620-1:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C – Part 1: General

  • EN 14620-2:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C – Part 2: Metallic components

  • EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C – Part 3: Concrete components

  • EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C – Part 4: Insulation components

  • EN 14620-5:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C – Part 5: Testing, drying, purging and cool-down

  • EN 14629:2007 Products and systems for the protection and repair of concrete structures – Test methods – Determination of chloride content in hardened concrete

  • EN 14630:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of carbonation depth in hardened concrete by the phenolphthalein method

  • EN 14636-1:2009 Plastics piping systems for non-pressure drainage and sewerage – Polyester resin concrete (PRC) – Part 1: Pipes and fittings with flexible joints

  • EN 14636-2:2009 Plastics piping systems for non-pressure drainage and sewerage – Polyester resin concrete (PRC) – Part 2: Manholes and inspection chambers

  • EN 14637:2007 Building hardware – Electrically controlled hold-open systems for fire/smoke door assemblies – Requirements, test methods, application and maintenance

  • EN 14638-1:2006 Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods

  • EN 14638-3:2010 Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

  • EN 14638-3:2010/AC:2012 Transportable gas cylinders – Refillable welded receptacles of a capacity not exceeding 150 litres – Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

  • EN 14647:2005 Calcium aluminate cement – Composition, specifications and conformity criteria

  • EN 14647:2005/AC:2006 Calcium aluminate cement – Composition, specifications and conformity criteria

  • EN 14648:2007 Building hardware – Fittings for shutters – Requirements and test methods

  • EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support – Part 1: Product specifications

  • EN 14653-2:2005 Manually operated hydraulic shoring systems for groundwork support – Part 2: Assessment by calculation or test

  • EN 14655:2005+A1:2010 Food processing machinery – Baguette slicers – Safety and hygiene requirements

  • EN 14688:2006 Sanitary appliances – Wash basins – Functional requirements and test methods

  • EN 1470:2008 Textile floor coverings – Classification of needled floor coverings except for needled pile floor coverings

  • EN 14700:2005 Welding consumables – Welding consumables for hard-facing

  • EN 14705:2005 Heat exchangers – Method of measurement and evaluation of thermal performances of wet cooling towers

  • EN 14706:2012 Thermal insulating products for building equipment and industrial installations – Determination of maximum service temperature

  • EN 14707:2012 Thermal insulating products for building equipment and industrial installations – Determination of maximum service temperature for preformed pipe insulation

  • EN 1471:1996 Textile floor coverings – Assessment of changes in appearance

  • EN 1471:1996/A1:2003 Textile floor coverings – Assessment of changes in appearance

  • EN 14714:2005 Inland navigation vessels – Connection nozzle for equipment and devices at cargo tanks – Dimensions

  • EN 14717:2005 Welding and allied processes – Environmental check list

  • EN 14726:2005 Aluminium and aluminium alloys – Chemical analysis – Guideline for spark optical emission spectrometric analysis

  • EN 14741:2006 Thermoplastics piping and ducting systems – Joints for buried non-pressure applications – Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure

  • EN 14744:2005 Inland navigation vessels and sea-going vessels – Navigation light

  • EN 14744:2005/AC:2006 Inland navigation vessels and sea-going vessels – Navigation light

  • EN 14755:2005 Extruded particleboards – Specifications

  • EN 14758-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD) – Part 1: Specifications for pipes, fittings and the system

  • EN 14759:2005 Shutters – Acoustic insulation relative to airborne sound – Expression of performance

  • EN 14768:2005 Fibreboard drums – Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l

  • EN 14772:2005 Flanges and their joints – Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560

  • EN 14774-1:2009 Solid biofuels – Determination of moisture content – Oven dry method – Part 1: Total moisture – Reference method

  • EN 14774-2:2009 Solid biofuels – Determination of moisture content – Oven dry method – Part 2: Total moisture – Simplified method

  • EN 14774-3:2009 Solid biofuels – Determination of moisture content – Oven dry method – Part 3: Moisture in general analysis sample

  • EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining – Product specification and requirements

  • EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining – Product specification and requirements

  • EN 14784-1:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems

  • EN 14784-2:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 2: General principles for testing of metallic materials using X-rays and gamma rays

  • EN 14786:2006 Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions – Atomizer test

  • EN 14802:2005 Plastics piping systems – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of resistance against surface and traffic loading

  • EN 148-1:1999 Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection

  • EN 148-2:1999 Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection

  • EN 14820:2004 Single-use containers for human venous blood specimen collection

  • EN 14825:2013 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling – Testing and rating at part load conditions and calculation of seasonal performance

  • EN 14829:2007 Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

  • EN 148-3:1999 Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3

  • EN 14830:2006 Thermoplastics inspection chamber and manhole bases – Test methods for buckling resistance

  • EN 14832:2005 Petroleum and related products – Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids

  • EN 14833:2005 Petroleum and related products – Determination of the hydrolytic stability of fire-resistant phosphate ester fluids

  • EN 14845-1:2007 Test methods for fibres in concrete – Part 1: Reference concretes

  • EN 14845-2:2006 Test methods for fibres in concrete – Part 2: Effect on concrete

  • EN 14846:2008 Building hardware – Locks and latches – Electromechanically operated locks and striking plates – Requirements and test methods

  • EN 1486:2007 Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting

  • EN 1487:2000 Building valves – Hydraulic safety groups – Tests and requirements

  • EN 14870-1:2011 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 1: Induction bends (ISO 15590-1:2009 modified)

  • EN 14870-2:2004 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 2: Fittings (ISO 15590-2:2003 modified)

  • EN 14870-3:2006 Petroleum and natural gas industries – Induction bends, fittings and flanges for pipeline transportation systems – Part 3: Flanges (ISO 15590-3:2004, modified)

  • EN 14874:2005 Inland navigation vessels – Studless anchor chain – Cable lifter

  • EN 14876:2007 Transportable gas cylinders – Periodic inspection and testing of welded steel pressure drums

  • EN 1488:2000 Building valves – Expansion groups – Tests and requirements

  • EN 14886:2008 Plastics and rubber machines – Bandknife cutting machines for block foams – Safety requirements

  • EN 14889-1:2006 Fibres for concrete – Part 1: Steel fibres – Definitions, specifications and conformity

  • EN 14889-2:2006 Fibres for concrete – Part 2: Polymer fibres – Definitions, specifications and conformity

  • EN 1489:2000 Building valves – Pressure safety valves – Tests and requirements

  • EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives – Requirements, test methods, evaluation of conformity, classification and designation

  • EN 14891:2012/AC:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives – Requirements, test methods, evaluation of conformity, classification and designation

  • EN 14893:2006 LPG equipment and accessories – Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres

  • EN 14893:2006/AC:2007 LPG equipment and accessories – Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres

  • EN 149:2001+A1:2009 Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking

  • EN 1490:2000 Building valves – Combined temperature and pressure relief valves – Tests and requirements

  • EN 14900:2006 Textile floor coverings – Determination of the density of the textile fleece backing

  • EN 14908-1:2005 Open Data Communication in Building Automation, Controls and Building Management – Control Network Protocol – Part 1: Protocol Stack

  • EN 14908-2:2005 Open Data Communication in Building Automation, Controls and Building Management – Control Network Protocol – Part 2: Twisted Pair Communication

  • EN 14908-3:2006 Open Data Communication in Building Automation, Controls and Building Management – Control Network Protocol – Part 3: Power Line Channel Specification

  • EN 14908-4:2006 Open Data Communication in Building Automation, Controls and Building Management – Control Network Protocol – Part 4: IP Communication

  • EN 14908-5:2009 Open Data Communication in Building Automation, Controls and Building Management Implementation Guideline – Control Network Protocol – Part 5: Implementation

  • EN 1491:2000 Building valves – Expansion valves – Tests and requirements

  • EN 14910:2007+A1:2009 Garden equipment – Walk-behind combustion engine powered trimmers – Safety

  • EN 1492-1:2000+A1:2008 Textile slings – Safety – Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

  • EN 1493:2010 Vehicle lifts

  • EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment – Pedestrian controlled and hand-held machines – Determination of accessibility of hot surfaces

  • EN 14933:2007 Thermal insulation and light weight fill products for civil engineering applications – Factory made products of expanded polystyrene (EPS) – Specification

  • EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications – Factory made products of extruded polystyrene foam (XPS) – Specification

  • EN 14935:2006 Copper and copper alloys – Determination of impurities in pure copper – ET AAS method

  • EN 14936-1:2006 Copper and copper alloys – Determination of aluminium content – Part 1: Titrimetric method

  • EN 14936-2:2006 Copper and copper alloys – Determination of aluminium content – Part 2: FAAS method

  • EN 14937-1:2006 Copper and copper alloys – Determination of antimony content – Part 1: Spectrophotometric method

  • EN 14937-2:2006 Copper and copper alloys – Determination of antimony content – Part 2: FAAS method

  • EN 14938-2:2010 Copper and copper alloys – Determination of bismuth content – Part 2: Flame atomic absorption spectrometric method (FAAS)

  • EN 14939:2006 Copper and copper alloys – Determination of beryllium content – FAAS method

  • EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment

  • EN 14940-2:2006 Copper and copper alloys – Determination of chromium content – Part 2: FAAS method

  • EN 14941:2006 Copper and copper alloys – Determination of cobalt content – FAAS method

  • EN 14942-2:2006 Copper and copper alloys – Determination of arsenic content – Part 2: FAAS method

  • EN 1495:1997+A2:2009 Lifting platforms – Mast climbing work platforms

  • EN 1495:1997+A2:2009/AC:2010 Lifting platforms – Mast climbing work platforms

  • EN 14957:2006+A1:2010 Food processing machinery – Dishwashing machines with conveyor – Safety and hygiene requirements

  • EN 14958:2006+A1:2009 Food processing machinery – Machinery for grinding and processing flour and semolina – Safety and hygiene requirements

  • EN 1496:2006 Personal fall protection equipment – Rescue lifting devices

  • EN 14960:2013 Inflatable play equipment – Safety requirements and test methods

  • EN 14963:2006 Roof coverings – Continuous rooflights of plastics with or without upstands – Classification, requirements and test methods

  • EN 14964:2006 Rigid underlays for discontinuous roofing – Definitions and characteristics

  • EN 14965:2005 Inland navigation vessels – Flat bollards

  • EN 1497:2007 Personal fall protection equipment – Rescue harnesses

  • EN 14974:2006+A1:2010 Facilities for users of roller sports equipment – Safety requirements and test methods

  • EN 14975:2006+A1:2010 Loft ladders – Requirements, marking and testing

  • EN 14977:2006 Copper and copper alloys – Detection of tensile stress – 5 % ammonia test

  • EN 14978:2006 Laminate floor coverings – Elements with acrylic based surface layer, electron beam cured – Specifications, requirements and test methods

  • EN 1498:2006 Personal fall protection equipment – Rescue loops

  • EN 14982:2006+A1:2010 Plastics piping and ducting systems – Thermoplastics shafts or risers for inspection chambers and manholes – Determination of ring stiffness

  • EN 14985:2012 Cranes – Slewing jib cranes

  • EN 14988-1:2006+A1:2012 Children’s high chairs – Part 1: Safety requirements

  • EN 14988-2:2006+A1:2012 Children’s high chairs – Part 2: Test methods

  • EN 15000:2008 Safety of industrial trucks – Self propelled variable reach trucks – Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

  • EN 15004-10:2008 Fixed firefighting systems – Gas extinguishing systems – Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15:2005, modified)

  • EN 15004-7:2008 Fixed firefighting systems – Gas extinguishing systems – Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2005, modified)

  • EN 15004-8:2008 Fixed firefighting system – Gas extinguishing systems – Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2005, modified)

  • EN 15004-9:2008 Fixed firefighting systems – Gas extinguishing systems – Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2005, modified)

  • EN 15011:2011 Cranes – Bridge and gantry cranes

  • EN 15012:2007 Plastics piping systems – Soil and waste discharge systems within the building structure – Performance characteristics for pipes, fittings and their joints

  • EN 15014:2007 Plastics piping systems – Buried and above ground systems for water and other fluids under pressure – Performance characteristics for pipes, fittings and their joints

  • EN 15015:2007 Plastics piping systems – Systems for hot and cold water not intended for human consumption – Performance characteristics for pipes, fittings and their joints

  • EN 1502:1995 Inland navigation vessels – Boarding ladders

  • EN 15022-3:2006 Copper and copper alloys – Determination of tin content – Part 3: Low tin content – Flame atomic absorption spectrometry method (FAAS)

  • EN 15022-4:2011 Copper and copper alloys – Determination of tin content – Part 4: Medium tin content – Flame atomic absorption spectrometric method (FAAS)

  • EN 15023-3:2010 Copper and copper alloys – Determination of nickel content – Part 3: Flame atomic absorption spectrometric method (FAAS)

  • EN 15024-2:2006 Copper and copper alloys – Determination of zinc content – Part 2: Flame atomic absorption spectrometry method (FAAS)

  • EN 15025:2010 Copper and copper alloys – Determination of magnesium content – Flame atomic absorption spectrometric method (FAAS)

  • EN 15026:2007 Hygrothermal performance of building components and building elements – Assessment of moisture transfer by numerical simulation

  • EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site – Safety

  • EN 1503-1:2000 Valves – Materials for bodies, bonnets and covers – Part 1: Steels specified in European Standards

  • EN 1503-2:2000 Valves – Materials for bodies, bonnets and covers – Part 2: Steels other than those specified in European Standards

  • EN 1503-3:2000 Valves – Materials for bodies, bonnets and covers – Part 3: Cast irons specified in European Standards

  • EN 1503-3:2000/AC:2001 Valves – Materials for bodies, bonnets and covers – Part 3: Cast irons specified in European Standards

  • EN 1503-4:2002 Valves – Materials for bodies, bonnets and covers – Part 4: Copper alloys specified in European Standards

  • EN 15034:2006 Heating boilers – Condensing heating boilers for fuel oil

  • EN 15034:2006/AC:2008 Heating boilers – Condensing heating boilers for fuel oil

  • EN 15035:2006 Heating boilers – Special requirements for oil fired room sealed units up to 70 kW

  • EN 15036-1:2006 Heating boilers – Test regulations for airborne noise emissions from heat generators – Part 1: Airborne noise emissions from heat generators

  • EN 15036-2:2006 Heating boilers – Test regulations for airborne noise emissions from heat generators – Part 2: Flue gas noise emissions at the outlet of the heat generator

  • EN 1504-1:2005 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 1: Definitions

  • EN 1504-10:2003 Products and systems for the protection and repair of concrete structures – Definitions – Requirements – Quality control and evaluation of conformity – Part 10: Site application of products and systems and quality control of the works

  • EN 1504-10:2003/AC:2005 Products and systems for the protection and repair of concrete structures – Definitions – Requirements – Quality control and evaluation of conformity – Part 10: Site application of products and systems and quality control of the works

  • EN 1504-2:2004 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 2: Surface protection systems for concrete

  • EN 1504-3:2005 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 3: Structural and non-structural repair

  • EN 1504-4:2004 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 4: Structural bonding

  • EN 1504-5:2013 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 5: Concrete injection

  • EN 1504-6:2006 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 6: Anchoring of reinforcing steel bar

  • EN 1504-7:2006 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 7: Reinforcement corrosion protection

  • EN 1504-8:2004 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 8: Quality control and evaluation of conformity

  • EN 1504-9:2008 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 9: General principles for the use of products and systems

  • EN 15051:2006 Workplace atmospheres – Measurement of the dustiness of bulk materials – Requirements and reference test methods

  • EN 15056:2006+A1:2009 Cranes – Requirements for container handling spreaders

  • EN 15059:2009 Snow grooming equipment – Safety requirements

  • EN 15060:2006 Paints and varnishes – Guide for the classification and selection of coating systems for wood based materials in furniture for interior use

  • EN 15063-1:2006 Copper and copper alloys – Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) – Part 1: Guidelines to the routine method

  • EN 15063-2:2006 Copper and copper alloys – Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) – Part 2: Routine method

  • EN 15067:2007 Plastics and rubber machines – Film converting machines for bags and sacks – Safety requirements

  • EN 15079:2007 Copper and copper alloys – Analysis by spark source optical emission spectrometry (S-OES)

  • EN 15080-12:2011 Extended application of results from fire resistance tests – Part 12: Loadbearing masonry walls

  • EN 15080-8:2009 Extended application of results from fire resistance tests – Part 8: Beams

  • EN 15081:2007 Industrial valves – Mounting kits for part-turn valve actuator attachment

  • EN 15088:2005 Aluminium and aluminium alloys – Structural products for construction works – Technical conditions for inspection and delivery

  • EN 1509:2008 Playing field equipment – Badminton equipment – Functional and safety requirements, test methods

  • EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts – Safety requirements

  • EN 1510:2004 Playing field equipment – Tennis equipment – Functional and safety requirements, test methods

  • EN 15101-1:2013 Thermal insulation products for buildings – In-situ formed loose fill cellulose (LFCI) products – Part 1: Specification for the products before installation

  • EN 15101-2:2013 Thermal insulation products for buildings – In-situ formed loose fill cellulose (LFCI) products – Part 2: Specification for the installed products

  • EN 15102:2007+A1:2011 Decorative wall coverings – Roll and panel form

  • EN 15114:2006+A1:2008 Textile floor coverings – Classification of textile floor coverings without pile

  • EN 15115:2006 Textile floor coverings – Determination of sensitivity to spilled water

  • EN 1514-1:1997 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 1: Non-metallic flat gaskets with or without inserts

  • EN 1514-2:2005 Flanges and their joints – Gaskets for PN-designated flanges – Part 2: Spiral wound gaskets for use with steel flanges

  • EN 1514-3:1997 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 3: Non-metallic PTFE envelope gaskets

  • EN 1514-4:1997 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges

  • EN 1514-6:2003 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 6: Covered serrated metal gaskets for use with steel flanges

  • EN 1514-7:2004 Flanges and their joints – Gaskets for PN-designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges

  • EN 1514-8:2004 Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 8: Polymeric O-Ring gaskets for grooved flanges

  • EN 15149-1:2010 Solid biofuels – Determination of particle size distribution – Part 1: Oscillating screen method using sieve apertures of 1 mm and above

  • EN 15149-2:2010 Solid biofuels – Determination of particle size distribution – Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below

  • EN 1515-1:1999 Flanges and their joints – Bolting – Part 1: Selection of bolting

  • EN 15151-1:2012 Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods

  • EN 15151-2:2012 Mountaineering equipment – Braking devices – Part 2: Manual braking devices, safety requirements and test methods

  • EN 1515-2:2001 Flanges and their joints – Bolting – Part 2: Classification of bolt materials for steel flanges, PN designated

  • EN 1515-3:2005 Flanges and their joints – Bolting – Part 3: Classification of bolt materials for steel flanges, class designated

  • EN 1515-4:2009 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC

  • EN 15162:2008 Machines and plants for mining and tooling of natural stone – Safety requirements for gang saws

  • EN 15163:2008 Machines and installations for the exploitation and processing of natural stone – Safety – Requirements for diamond wire saws

  • EN 15164:2008 Machines and plants for mining and tooling of natural stone – Safety – Requirements for chain- and belt-slotting machines

  • EN 15166:2008 Food processing machinery – Automatic back splitting machines of butchery carcasses – Safety and hygiene requirements

  • EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout – Part 1: Definitions, specifications and conformity criteria

  • EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout – Part 2: Conformity evaluation

  • EN 1518:1998 Non-destructive testing – Leak testing – Characterization of mass spectrometer leak detectors

  • EN 15181:2008 Measuring method of the energy consumption of gas fired ovens

  • EN 15183:2006 Products and systems for the protection and repair of concrete structures – Test methods – Corrosion protection test

  • EN 15184:2006 Products and systems for the protection and repair of concrete structures – Test methods – Shear adhesion of coated steel to concrete (pull-out test)

  • EN 1519-1:1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylene (PE) – Part 1: Specifications for pipes, fittings and the system

  • EN 15195:2007 Liquid petroleum products – Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber

  • EN 15197:2007 Wood-based panels – Flaxboards – Specifications

  • EN 15199-1:2006 Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 1: Middle distillates and lubricating base oils

  • EN 15199-2:2006 Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 2: Heavy distillates and residual fuels

  • EN 15199-3:2008 Petroleum products – Determination of boiling range distribution by gas chromatography method – Part 3: Crude oil

  • EN 152:2011 Wood preservatives – Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service – Laboratory method

  • EN 15213-1:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 1: Reference architecture and terminology

  • EN 15213-2:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 2: Common status message elements

  • EN 15213-3:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 3: Interface and system requirements in terms of short range communication system

  • EN 15213-4:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 4: Interface and system requirements in terms of long range communication system

  • EN 15213-5:2013 Intelligent transport systems – After-theft systems for the recovery of stolen vehicles – Part 5: Messaging interface

  • EN 15217:2007 Energy performance of buildings – Methods for expressing energy performance and for energy certification of buildings

  • EN 15218:2013 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling – Terms, definitions, test conditions, test methods and requirements

  • EN 1522:1998 Windows, doors, shutters and blinds – Bullet resistance – Requirements and classification

  • EN 15224:2012 Health care services – Quality management systems – Requirements based on EN ISO 9001:2008

  • EN 15228:2009 Structural timber – Structural timber preservative treated against biological attack

  • EN 1523:1998 Windows, doors, shutters and blinds – Bullet resistance – Test method

  • EN 1525:1997 Safety of industrial trucks – Driverless trucks and their systems

  • EN 15254-5:2009 Extended application of results from fire resistance tests – Non-loadbearing walls – Part 5: Metal sandwich panel construction

  • EN 15254-7:2012 Extended application of results from fire resistance tests – Non-loadbearing ceilings – Part 7: Metal sandwich panel construction

  • EN 15255:2007 Energy performance of buildings – Sensible room cooling load calculation – General criteria and validation procedures

  • EN 1526:1997+A1:2008 Safety of industrial trucks – Additional requirements for automated functions on trucks

  • EN 15265:2007 Energy performance of buildings – Calculation of energy needs for space heating and cooling using dynamic methods – General criteria and validation procedures

  • EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware – Part 1: General requirements

  • EN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware – Part 10: Fire resistance of steel rolling shutter assemblies

  • EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware – Part 7: Fire resistance for steel sliding doorsets

  • EN 1527:2013 Building hardware – Hardware for sliding doors and folding doors – Requirements and test methods

  • EN 15270:2007 Pellet burners for small heating boilers – Definitions, requirements, testing, marking

  • EN 15271:2007 Inland navigation vessels – Studless anchor chain – Anchor equipment

  • EN 15272-1:2007 Inland navigation vessels – Equipment for rope leading – Part 1: General requirements

  • EN 15272-2:2007 Inland navigation vessels – Equipment for rope leading – Part 2: Fairlead

  • EN 15272-3:2007 Inland navigation vessels – Equipment for rope leading – Part 3: Roller fairleads

  • EN 15272-4:2007 Inland navigation vessels – Equipment for rope leading – Part 4: Rope lead

  • EN 15288-1:2008+A1:2010 Swimming pools – Part 1: Safety requirements for design

  • EN 15288-2:2008 Swimming pools – Part 2: Safety requirements for operation

  • EN 1529:1999 Doors leaves – Height, width, thickness and squareness – Tolerance classes

  • EN 153:2006 Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics

  • EN 1530:1999 Door leaves – General and local flatness – Tolerance classes

  • EN 15305:2008 Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction

  • EN 15305:2008/AC:2009 Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction

  • EN 15312:2007+A1:2010 Free access multi-sports equipment – Requirements, including safety and test methods

  • EN 15316-4-7:2008 Heating systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 4-7: Space heating generation systems, biomass combustion systems

  • EN 15316-4-8:2011 Heating systems in buildings – Method for calculation of system energy requirements and system efficiencies – Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems

  • EN 15317:2013 Non-destructive testing – Ultrasonic testing – Characterization and verification of ultrasonic thickness measuring equipment

  • EN 15332:2007 Heating boilers – Energy assessment of hot water storage systems

  • EN 15333-1:2008 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus

  • EN 15333-1:2008/AC:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus

  • EN 15333-2:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus

  • EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications – Definition, specifications and conformity criteria

  • EN 15376:2011 Automotive fuels – Ethanol as a blending component for petrol – Requirements and test methods

  • EN 15389:2008 Industrial valves – Performance characteristics of thermoplastic valves when used as construction products

  • EN 1540:2011 Workplace exposure – Terminology

  • EN 15414-3:2011 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample

  • EN 15415-1:2011 Solid recovered fuels – Determination of particle size distribution – Part 1: Screen method for small dimension particles

  • EN 15416-4:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 4: Determination of open assembly time for one component polyurethane adhesives

  • EN 15417:2006 Gas-fired central heating boilers – Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW

  • EN 1542:1999 Products and systems for the protection and repair of concrete structures – Test methods – Measurement of bond strength by pull-off

  • EN 1543:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of tensile strength development for polymers

  • EN 1544:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars

  • EN 15456:2008 Heating boilers – Electrical power consumption for heat generators – System boundaries – Measurements

  • EN 15457:2007 Paints and varnishes – Laboratory method for testing the efficacy of film preservatives in a coating against fungi

  • EN 15458:2007 Paints and varnishes – Laboratory method for testing the efficacy of film preservatives in a coating against algae

  • EN 15468:2007 Laminate floor coverings – Elements with directly applied printing and resin surface layer – Specifications, requirements and test methods

  • EN 15469:2007 Petroleum products – Test method for free water in liquefied petroleum gas by visual inspection

  • EN 15470:2007 Liquefied petroleum gases – Determination of dissolved residues – High temperature Gas chromatographic method

  • EN 15471:2007 Liquefied petroleum gases – Determination of dissolved residues – High-temperature gravimetric method

  • EN 15484:2007 Ethanol as a blending component for petrol – Determination of inorganic chloride – Potentiometric method

  • EN 15485:2007 Ethanol as a blending component for petrol – Determination of sulfur content – Wavelength dispersive X-ray fluorescence spectrometric method

  • EN 15486:2007 Ethanol as a blending component for petrol – Determination of sulfur content – Ultraviolet fluorescence method

  • EN 15487:2007 Ethanol as a blending component for petrol – Determination of phosphorus content – Ammonium molybdate spectrometric method

  • EN 15488:2007 Ethanol as a blending component for petrol – Determination of copper content – Graphite furnace atomic absorption spectrometric method

  • EN 15489:2007 Ethanol as a blending component for petrol – Determination of water content – Karl Fischer coulometric titration method

  • EN 15490:2007 Ethanol as a blending component for petrol – Determination of pHe

  • EN 15491:2007 Ethanol as a blending component for petrol – Determination of total acidity – Colour indicator titration method

  • EN 15492:2012 Ethanol as a blending component for petrol – Determination of inorganic chloride and sulfate content – Ion chromatographic method

  • EN 15495:2007 Non Destructive testing – Acoustic emission – Examination of metallic pressure equipment during proof testing – Zone location of AE sources

  • EN 1550:1997+A1:2008 Machine-tools safety – Safety requirements for the design and construction of work holding chucks

  • EN 15501:2013 Thermal insulation products for building equipment and industrial installations – Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products – Specification

  • EN 15502-1:2012 Gas-fired heating boilers – Part 1: General requirements and tests

  • EN 15502-2-1:2012 Gas-fired central heating boilers – Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW

  • EN 15503:2009+A1:2013 Garden equipment – Garden blowers, vacuums and blower/vacuums – Safety

  • EN 15530:2008 Aluminium and aluminium alloys – Environmental aspects of aluminium products – General guidelines for their inclusion in standards

  • EN 15553:2007 Petroleum products and related materials – Determination of hydrocarbon types – Fluorescent indicator adsorption method

  • EN 15567-1:2007 Sports and recreational facilities – Ropes courses – Part 1: Construction and safety requirements

  • EN 15567-2:2007 Sports- and recreational facilities – Ropes courses – Part 2: Operation requirements

  • EN 15573:2008 Earth-moving machinery – Design requirements for circulation on the road

  • EN 1559-4:1999 Founding – Technical conditions of delivery – Part 4: Additional requirements for aluminium alloy castings

  • EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from expanded perlite (EP) products – Part 2: Specification for the installed products

  • EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 15600-2:2010 Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 2: Specification for the installed products

  • EN 15605:2010 Copper and copper alloys – Inductively coupled plasma optical emission spectrometry

  • EN 15616:2012 Copper and copper alloys – Determination of cadmium content – Flame atomic absorption spectrometric method (FAAS)

  • EN 15622:2010 Copper and copper alloys – Determination of lead content – Flame atomic absorption spectrometric method (FAAS)

  • EN 15632-1:2009 District heating pipes – Pre-insulated flexible pipe systems – Part 1: Classification, general requirements and test methods

  • EN 15632-2:2010 District heating pipes – Pre-insulated flexible pipe systems – Part 2: Bonded plastic service pipes – Requirements and test methods

  • EN 15632-3:2010 District heating pipes – Pre-insulated flexible pipe systems – Part 3: Non bonded system with plastic service pipes; requirements and test methods

  • EN 15632-4:2009 District heating pipes – Pre-insulated flexible pipe systems – Part 4: Bonded system with metal service pipes; requirements and test methods

  • EN 15638:2009 Ice skates – Safety requirements and test methods

  • EN 15649-1:2009+A1:2012 Floating leisure articles for use on and in the water – Part 1: Classification, materials, general requirements and test methods

  • EN 15649-2:2009+A2:2013 Floating leisure articles for use on and in the water – Part 2: Consumer information

  • EN 15649-3:2009+A1:2012 Floating leisure articles for use on and in the water – Part 3: Additional specific safety requirements and test methods for Class A devices

  • EN 15649-4:2010+A1:2012 Floating leisure articles for use on and in the water – Part 4: Additional specific safety requirements and test methods for Class B devices

  • EN 15649-5:2009 Floating leisure articles for use on and in the water – Part 5: Additional specific safety requirements and test methods for Class C devices

  • EN 15649-6:2009 Floating leisure articles for use on and in the water – Part 6: Additional specific safety requirements and test methods for Class D devices

  • EN 15649-7:2009 Floating leisure articles for use on and in the water – Part 7: Additional specific safety requirements and test methods for class E devices

  • EN 1565-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Styrene copolymer blends (SAN+PVC) – Part 1: Specifications for pipes, fittings and the system

  • EN 15657-1:2009 Acoustic properties of building elements and of buildings – Laboratory measurement of airborne and structure borne sound from building equipment – Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example

  • EN 1566-1:1998 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Chlorinated poly(vinyl chloride) (PVC-C) – Part 1: Specifications for pipes, fittings and the system

  • EN 15684:2012 Building hardware – Mechatronic cylinders – Requirements and test methods

  • EN 15686:2010 Railway applications – Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G

  • EN 15690-2:2009 Copper and copper alloys – Determination of iron content – Part 2: Flame atomic absorption spectrometric method (FAAS)

  • EN 15691:2009 Ethanol as a blending component for petrol – Determination of dry residue (involatile material) – Gravimetric method

  • EN 15692:2009 Ethanol as a blending component for petrol – Determination of water content – Karl Fischer potentiometric titration method

  • EN 15694:2009 Agricultural and forestry tractors – Passenger seat – Requirements and test procedures

  • EN 15695-1:2009 Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 1: Cab classification, requirements and test procedures

  • EN 15695-2:2009 Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures

  • EN 15695-2:2009/AC:2011 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures

  • EN 15698-1:2009 District heating pipes – Preinsulated bonded twin pipe systems for directly buried hot water networks – Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene

  • EN 1570-1:2011 Safety requirements for lifting tables – Part 1: Lifting tables serving up to two fixed landings

  • EN 15714-1:2009 Industrial valves – Actuators – Part 1: Terminology and definitions

  • EN 15714-2:2009 Industrial valves – Actuators – Part 2: Electric actuators for industrial valves – Basic requirements

  • EN 15714-3:2009 Industrial valves – Actuators – Part 3: Pneumatic part-turn actuators for industrial valves – Basic requirements

  • EN 15714-4:2009 Industrial valves – Actuators – Part 4: Hydraulic part-turn actuators for industrial valves – Basic requirements

  • EN 15715:2009 Thermal insulation products – Instructions for mounting and fixing for reaction to fire testing – Factory made products

  • EN 15721:2013 Ethanol as a blending component for petrol – Determination of higher alcohols, methanol and other impurities – Gas chromatographic method

  • EN 15725:2010 Extended application reports on the fire performance of construction products and building elements

  • EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) – Expanded clay lightweight aggregate products (LWA)

  • EN 15736:2009 Timber Structures – Test methods – Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses

  • EN 15737:2009 Timber Structures – Test methods – Torsional resistance of driving in screws

  • EN 15743:2010 Supersulfated cement – Composition, specifications and conformity criteria

  • EN 15751:2009 Automotive fuels – Fatty acid methyl ester (FAME) fuel and blends with diesel fuel – Determination of oxidation stability by accelerated oxidation method

  • EN 15769:2009 Ethanol as a blending component of petrol – Determination of appearance – Visual method

  • EN 15772:2012 Textile floor coverings – Minimum requirements for needled floor coverings for single usage in events of limited duration

  • EN 15773:2009 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] – Specifications, recommendations and guidelines

  • EN 15774:2010 Food processing machinery – Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) – Safety and hygiene requirements

  • EN 15776:2011 Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %

  • EN 15779:2009+A1:2013 Petroleum products and fat and oil derivates – Fatty acid methyl esters (FAME) for diesel engines – Determination of polyunsaturated (=4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography

  • EN 15811:2009 Agricultural machinery – Guards for moving parts of power transmission – Guard opening with tool (ISO/TS 28923:2007 modified)

  • EN 15811:2009/AC:2010 Agricultural machinery – Guards for moving parts of power transmission – Guard opening with tool (ISO/TS 28923:2007 modified)

  • EN 15824:2009 Specifications for external renders and internal plasters based on organic binders

  • EN 15830:2012 Rough-terrain variable reach trucks – Visibility – Test methods and verification

  • EN 15837:2009 Ethanol as a blending component for petrol – Determination of phosphorus, copper and sulfur content – Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)

  • EN 15856:2010 Non-destructive testing – Acoustic emission – General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid

  • EN 15857:2010 Non-destructive testing – Acoustic emission – Testing of fibre-reinforced polymers – Specific methodology and general evaluation criteria

  • EN 15861:2012 Food processing machinery – Smokehouses – Safety and hygiene requirements

  • EN 15869-1:2010 Inland navigation vessels – Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz – Part 1: General requirements

  • EN 15869-2:2010 Inland navigation vessels – Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz – Part 2: Onshore unit, safety requirements

  • EN 15869-3:2010 Inland navigation vessels – Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz – Part 3: On-board unit, safety requirements

  • EN 15876-1:2010+A1:2012 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to EN 15509 – Part 1: Test suite structure and test purposes

  • EN 15876-2:2011 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to EN 15509 – Part 2: Abstract test suite

  • EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling – Part 1: Direct exchange-to-water heat pumps

  • EN 15882-1:2011 Extended application of results from fire resistance tests for service installations – Part 1: Ducts

  • EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations – Part 3: Penetration seals

  • EN 1591-1:2001+A1:2009 Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation method

  • EN 1591-1:2001+A1:2009/AC:2011 Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation method

  • EN 1591-2:2008 Flanges and their joints – Design rules for gasketed circular flange connections – Part 2: Gasket parameters

  • EN 1591-4:2013 Flanges and their joints – Part 4: Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems

  • EN 15915:2010 Copper and copper alloys – Determination of silver content – Flame atomic absorption spectrometric method (FAAS)

  • EN 15916-2:2010 Copper and copper alloys – Determination of tellurium content – Part 2: Medium tellurium content – Flame atomic absorption spectrometric method (FAAS)

  • EN 1592-4:1997 Aluminium and aluminium alloys – HF seam welded tubes – Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes

  • EN 1593:1999 Non-destructive testing – Leak testing – Bubble emission techniques

  • EN 1593:1999/A1:2003 Non-destructive testing – Leak testing – Bubble emission techniques

  • EN 15938:2010 Automotive fuels – Ethanol blending component and ethanol (E85) automotive fuel – Determination of electrical conductivity

  • EN 15944:2010 Liquid petroleum products – Determination of nickel and vanadium content – Inductively coupled plasma optical emission spectrometry method (ICP OES)

  • EN 15969-1:2011 Tanks for transport of dangerous goods – Digital interface for the data transfer between tank vehicle and with stationary facilities – Part 1: Protocol specification – Control, measurement and event data

  • EN 15969-2:2011 Tanks for transport of dangerous goods – Digital interface for the data transfer between tank vehicle and with stationary facilities – Part 2: Commercial and logistic data

  • EN 1598:2011 Health and safety in welding and allied processes – Transparent welding curtains, strips and screens for arc welding processes

  • EN 15984:2011 Petroleum industry and products – Determination of composition of refinery heating gas and calculation of carbon content and calorific value – Gas chromatography method

  • EN 16000:2010 Plastics piping systems – Systems within the building structure – Mounting and fixing of components in the test apparatus to thermal attack by a single burning item

  • EN 16002:2010 Flexible sheets for waterproofing – Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing

  • EN 16003:2011 Chemicals used for treatment of water intended for human consumption – Calcium magnesium carbonate

  • EN 16004:2011 Chemicals used for treatment of water intended for human consumption – Magnesium oxide

  • EN 16005:2012 Power operated pedestrian doorsets – Safety in use – Requirements and test methods

  • EN 16009:2011 Flameless explosion venting devices

  • EN 1601:1997 Liquid petroleum products – Unleaded petrol – Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID)

  • EN 16012:2012 Thermal insulation for buildings – Reflective insulation products – Determination of the declared thermal performance

  • EN 16014:2011 Hardware for furniture – Strength and durability of locking mechanisms

  • EN 16016-1:2011 Non destructive testing – Radiation methods – Computed tomography – Part 1: Terminology

  • EN 16016-2:2011 Non destructive testing – Radiation methods – Computed tomography – Part 2: Principle, equipment and samples

  • EN 16016-3:2011 Non destructive testing – Radiation methods – Computed Tomography – Part 3: Operation and interpretation

  • EN 16016-4:2011 Non destructive testing – Radiation methods – Computed tomography – Part 4: Qualification

  • EN 16018:2011 Non-destructive testing – Terminology – Terms used in ultrasonic testing with phased arrays

  • EN 1602:2013 Thermal insulating products for building applications – Determination of the apparent density

  • EN 16020:2011 Explosion diverters

  • EN 16024:2011 Fertilizers – Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea – Method using high-performance liquid chromatography (HPLC)

  • EN 16025-1:2013 Thermal and/or sound insulating products in building construction – Bound EPS ballastings – Part 1: Requirements for factory premixed EPS dry plaster

  • EN 16025-2:2013 Thermal and/ or sound insulating products in building construction – Bound EPS ballastings – Part 2: Processing of the factory premixed EPS dry plaster

  • EN 16027:2011 Protective clothing – Gloves with protective effect for association football goal keepers

  • EN 16028:2012 Railway applications – Wheel/rail friction management – Lubricants for trainborne and trackside applications

  • EN 1603:2013 Thermal insulating products for building applications – Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity)

  • EN 16031:2012 Adjustable telescopic aluminium props – Product specifications, design and assessment by calculation and tests

  • EN 16032:2011 Fertilizers – Extraction and determination of elemental sulfur

  • EN 16035:2012 Hardware performance sheet (HPS) – Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows

  • EN 16037:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydrogen sulfate

  • EN 16038:2012 Chemicals used for treatment of water for swimming pools – Sodium hydrogen sulfate

  • EN 16039:2011 Water quality – Guidance standard on assessing the hydromorphological features of lakes

  • EN 1604:2013 Thermal insulating products for building applications – Determination of dimensional stability under specified temperature and humidity conditions

  • EN 1605:2013 Thermal insulating products for building applications – Determination of deformation under specified compressive load and temperature conditions

  • EN 16051-1:2012 Inflation devices and accessories for inflatable consumer products – Part 1: Compatibility of valves and valve adapters

  • EN 16051-2:2012 Inflation devices and accessories for inflatable consumer products – Part 2: Safety requirements, durability, performance, compatibility and test methods of inflators

  • EN 16055:2012 Leather – Raw bovine hides and skins – Description, presentation and preservation

  • EN 16056:2012 Influence of metallic materials on water intended for human consumption – Method to evaluate the passive behaviour of stainless steels

  • EN 16057:2012 Influence of metallic materials on water intended for human consumption – Determination of residual surface lead (Pb) – Extraction method

  • EN 16058:2012 Influence of metallic materials on water intended for human consumption – Dynamic rig test for assessment of surface coatings with nickel layers – Long-term test method

  • EN 1606:2013 Thermal insulating products for building applications – Determination of compressive creep

  • EN 16062:2011 Intelligent transport systems – eSafety – eCall high level application requirements (HLAP)

  • EN 16063:2011 Packaging – Rigid plastic containers – Nomenclature of plastic finishes

  • EN 16064:2011 Packaging – Rigid plastic containers – PET finish 30/25 High (18,5)

  • EN 16065:2011 Packaging – Rigid plastic containers – PET finish 30/25 Low (16,8)

  • EN 16066:2011 Packaging – Rigid plastic containers – PET finish 26,7 (lead 6,35)

  • EN 16067:2011 Packaging – Rigid plastic containers – PET finish 26,7 (lead 9,00)

  • EN 16068:2011 Packaging – Rigid plastic containers – PET finish 38

  • EN 16069:2012 Thermal insulation products for buildings – Factory made products of polyethylene foam (PEF) – Specification

  • EN 1607:2013 Thermal insulating products for building applications – Determination of tensile strength perpendicular to faces

  • EN 16072:2011 Intelligent transport systems – eSafety – Pan-European eCall operating requirements

  • EN 16074:2011 Paints and varnishes – Determination of non-volatile-matter content and spreading rate of coil coating materials

  • EN 16075:2011 Fertilizers – Determination of N-(2-nitrophenyl)phosphoric triamide (2-NPT) in urea and fertilizers containing urea – Method using high-performance liquid chromatography (HPLC)

  • EN 16079:2011 Founding – Compacted (vermicular) graphite cast irons

  • EN 1608:2013 Thermal insulating products for building applications – Determination of tensile strength parallel to faces

  • EN 16083:2012 Paddles and oars for recreational boats – Safety requirements and test methods

  • EN 16084:2011 Refrigerating systems and heat pumps – Qualification of tightness of components and joints

  • EN 16086-1:2011 Soil improvers and growing media – Determination of plant response – Part 1: Pot growth test with Chinese cabbage

  • EN 16086-2:2011 Soil improvers and growing media – Determination of plant response – Part 2: Petri dish test using cress

  • EN 16087-1:2011 Soil improvers and growing media – Determination of the aerobic biological activity – Part 1: Oxygen uptake rate (OUR)

  • EN 16087-2:2011 Soil improvers and growing media – Determination of the aerobic biological activity – Part 2: Self heating test for compost

  • EN 1609:2013 Thermal insulating products for building applications – Determination of short term water absorption by partial immersion

  • EN 16090:2011 Copper and copper alloys – Estimation of average grain size by ultrasound

  • EN 16091:2011 Liquid petroleum products – Middle distillates and fatty acid methyl ester (FAME) fuels and blends – Determination of oxidation stability by rapid small scale oxidation method

  • EN 16094:2012 Laminate floor coverings – Test method for the determination of micro-scratch resistance

  • EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances

  • EN 1610:1997 Construction and testing of drains and sewers

  • EN 16101:2012 Water quality – Guidance standard on interlaboratory comparison studies for ecological assessment

  • EN 16102:2011 Intelligent transport systems – eCall – Operating requirements for third party support

  • EN 16105:2011 Paints and varnishes – Laboratory method for determination of release of substances from coatings in intermittent contact with water

  • EN 16109:2011 Fertilizers – Determination of complexed micro-nutrient ions in fertilizers – Identification of lignosulfonates

  • EN 1611-1:1999 Sawn timber – Appearance grading of softwoods – Part 1: European spruces, firs, pines and Douglas firs

  • EN 1611-1:1999/A1:2002 Sawn timber – Appearance grading of softwoods – Part 1: European spruces, firs, pines, Douglas fir and larches

  • EN 16116-1:2013 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 1: Passenger vehicles, luggage vans and locomotives

  • EN 16116-2:2013 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 2: Freight wagons

  • EN 16117-1:2011 Copper and copper alloys – Determination of copper content – Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %

  • EN 16117-2:2012 Copper and copper alloys – Determination of copper content – Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %

  • EN 16119:2013 LPG equipment and accessories – Sealing caps and plugs for LPG cylinder and pressure vessel valves – Specification and testing

  • EN 16120:2012 Child use and care articles – Chair mounted seat

  • EN 1612-1:1997+A1:2008 Plastics and rubber machines – Reaction moulding machines – Part 1: Safety requirements for metering and mixing units

  • EN 16121:2013 Non-domestic storage furniture – Requirements for safety, strength, durability and stability

  • EN 16122:2012 Domestic and non-domestic storage furniture – Test methods for the determination of strength, durability and stability

  • EN 16123:2013 Characterization of waste – Guidance on selection and application of screening methods

  • EN 16124:2011 Founding – Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications

  • EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin

  • EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures

  • EN 16135:2011 Automotive fuels – Determination of manganese content in unleaded petrol – Flame atomic absorption spectrometric method (FAAS)

  • EN 16136:2011 Automotive fuels – Determination of manganese content in unleaded petrol – Inductively coupled plasma optical emission spectrometry (ICP OES) method

  • EN 16139:2013 Furniture – Strength, durability and safety – Requirements for non-domestic seating

  • EN 16139:2013/AC:2013 Furniture – Strength, durability and safety – Requirements for non-domestic seating

  • EN 1614:2006 Health informatics – Representation of dedicated kinds of property in laboratory medicine

  • EN 16140:2011 Natural stone test methods – Determination of sensitivity to changes in appearance produced by thermal cycles

  • EN 16143:2013 Petroleum products – Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils – Procedure using double LC cleaning and GC/MS analysis

  • EN 16144:2012 Liquid petroleum products – Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels – Fixed range injection period, constant volume combustion chamber method

  • EN 16145:2012 Sanitary tapware – Extractable outlets for sink and basin mixers – General technical specification

  • EN 16146:2012 Sanitary tapware – Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 – General technical specification

  • EN 16147:2011 Heat pumps with electrically driven compressors – Testing and requirements for marking of domestic hot water units

  • EN 16147:2011/AC:2011 Heat pumps with electrically driven compressors – Testing and requirements for marking of domestic hot water units

  • EN 1615:2000 Enteral feeding catheters and enteral giving sets for single use and their connectors – Design and testing

  • EN 16150:2012 Water quality – Guidance on pro-rata Multi-Habitat sampling of benthic macro-invertebrates from wadeable rivers

  • EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings – Requirements and test methods

  • EN 16155:2012 Foodstuffs – Determination of sucralose – High performance liquid chromatographic method

  • EN 16159:2012 Animal feeding stuffs – Determination of selenium by hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion (digestion with 65 % nitric acid and 30 % hydrogen peroxide)

  • EN 1616:1997 Sterile urethral catheters for single use

  • EN 1616:1997/A1:1999 Sterile urethral catheters for single use

  • EN 16161:2012 Water quality – Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples

  • EN 16164:2013 Water quality – Guidance standard for designing and selecting taxonomic keys

  • EN 1617:1997 Sterile drainage catheters and accessory devices for single use

  • EN 1618:1997 Catheters other than intravascular catheters – Test methods for common properties

  • EN 1619:1996 Biotechnology – Large-scale process and production – General requirements for management and organization for strain conservation procedures

    • | 1 || 2 || 3 |

top

Company Info :

퍼포먼스네트워크(주)

강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
Tel : 02-980-9800(대표전화)
E-Mail: info @ anytest.co.kr (Technical,시험인증)

ALT_TEXT
QR Code Generator
  • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

    [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

  • MIL-Spec Documents2013년 December 11일 - 6:40 pm

    MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

  • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

    아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

  • IP Code2016년 April 12일 - 6:42 pm

    IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

  • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

    ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

November 2024
M T W T F S S
« Aug    
 123
45678910
11121314151617
18192021222324
252627282930  
© Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.