STD-EN related CE Marking

-|1|- |2||3||4|

• EN 1:1998/A1:2007 ; EN 40-4:2005
• EN 10025-1:2004 ; Hot rolled products of structural steels – Part 1: General technical delivery conditions
• EN 10028-1:2007+A1:2009 ; Flat products made of steels for pressure purposes – Part 1: General requirements
• EN 10028-1:2007+A1:2009/AC:2009 ; EN 10028-2:2009
• EN 10028-2:2009 ; Flat products made of steels for pressure purposes – Part 2: Non-alloy and alloy steels with specified elevated temperature properties
• EN 10028-3:2009 ; Flat products made of steels for pressure purposes – Part 3: Weldable fine grain steels, normalized
• EN 10028-4:2009 ; Flat products made of steels for pressure purposes – Part 4: Nickel alloy steels with specified low temperature properties
• EN 10028-5:2009 ; Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels, thermomechanically rolled
• EN 10028-6:2009 ; Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenched and tempered
• EN 10028-7:2007 ; Flat products made of steels for pressure purposes – Part 7: Stainless steels
• EN 1005-1:2001+A1:2008 ; Safety of machinery – Human physical performance – Part 1: Terms and definitions
• EN 1005-2:2003+A1:2008 ; Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery
• EN 1005-3:2002+A1:2008 ; Safety of machinery – Human physical performance – Part 3: Recommended force limits for machinery operation
• EN 1005-4:2005+A1:2008 ; Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery
• EN 10088-4:2009 ; Stainless steels – Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
• EN 10088-5:2009 ; Stainless steels – Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
• EN 1010-1:2004+A1:2010 ; Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements
• EN 1010-2:2006+A1:2010 ; Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery
• EN 1010-3:2002+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 3: Cutting machines
• EN 1010-4:2004+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 4: Bookbinding, paper converting and finishing machines
• EN 1012-1:2010 ; Compressors and vacuum pumps – Safety requirements – Part 1: Air compressors
• EN 1012-2:1996+A1:2009 ; Compressors and vacuum pumps – Safety requirements – Part 2: Vacuum pumps
• EN 1020:2009 ; Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
• EN 10204:2004 ; Metallic products – Types of inspection documents
• EN 10207:2005 ; Steels for simple pressure vessels – Technical delivery requirements for plates, strips and bars
• EN 10210-1:2006 ; Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
• EN 10213:2007 ; Steel castings for pressure purposes
• EN 10213:2007/AC:2008 ; EN 10216-1:2002
• EN 10216-1:2002 ; Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties
• EN 10216-2:2002+A2:2007 ; Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
• EN 10216-3:2002 ; Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes
• EN 10216-4:2002 ; Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
• EN 10216-5:2004 ; Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 5: Stainless steel tubes
• EN 10216-5:2004/AC:2008 ; EN 10217-1:2002
• EN 10217-1:2002 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties
• EN 10217-2:2002 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
• EN 10217-3:2002 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes
• EN 10217-4:2002 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
• EN 10217-5:2002 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
• EN 10217-6:2002 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
• EN 10217-7:2005 ; Welded steel tubes for pressure purposes – Technical delivery conditions – Part 7: Stainless steel tubes
• EN 10219-1:2006 ; Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
• EN 10222-1:1998 ; Steel forgings for pressure purposes – Part 1: General requirements for open die forgings
• EN 10222-2:1999 ; Steel forgings for pressure purposes – Part 2: Ferritic and martensitic steels with specified elevated temperature properties
• EN 10222-2:1999/AC:2000 ; EN 10222-3:1998
• EN 10222-3:1998 ; Steel forgings for pressure purposes – Part 3: Nickel steels with specified low temperature properties
• EN 10222-4:1998 ; Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
• EN 10222-5:1999 ; Steel forgings for pressure purposes – Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
• EN 10222-5:1999/AC:2000 ; EN 10253-2:2007
• EN 10224:2002 ; Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption – Technical delivery conditions
• EN 10224:2002/A1:2005 ; EN 10255:2004+A1:2007
• EN 10253-2:2007 ; Butt-welding pipe fittings – Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
• EN 10253-4:2008 ; Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
• EN 10253-4:2008/AC:2009 ; EN 10269:1999
• EN 10255:2004+A1:2007 ; Non-Alloy steel tubes suitable for welding and threading – Technical delivery conditions
• EN 10269:1999 ; Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
• EN 10269:1999/A1:2006/AC:2008 ; EN 10272:2007
• EN 10272:2007 ; Stainless steel bars for pressure purposes
• EN 10273:2007 ; Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
• EN 1028-1:2002+A1:2008 ; Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 1: Classification – General and safety requirements
• EN 1028-2:2002+A1:2008 ; Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 2: Verification of general and safety requirements
• EN 10305-4:2011 ; Steel tubes for precision applications – Technical delivery conditions – Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
• EN 10305-6:2005 ; Steel tubes for precision applications – Technical delivery conditions – Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
• EN 10311:2005 ; Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
• EN 10312:2002 ; Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption – Technical delivery conditions
• EN 10312:2002/A1:2005 ; EN 10340:2007
• EN 1032:2003+A1:2008 ; Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value
• EN 10340:2007 ; Steel castings for structural uses
• EN 10340:2007/AC:2008 ; EN 10343:2009
• EN 1034-1:2000+A1:2010 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 1: Common requirements
• EN 1034-13:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 13: Machines for de-wiring bales and units
• EN 1034-14:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 14: Reel splitter
• EN 1034-16:2012 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 16: Paper and board making machines
• EN 1034-17:2012 (new) ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 17: Tissue making machines
• EN 1034-2:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 2: Barking drums
• EN 1034-21:2012 (new) ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 21: Coating machines
• EN 1034-22:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 22: Wood Grinders
• EN 1034-26:2012 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 26: Roll packaging machines
• EN 1034-27:2012 (new) ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 27: Roll handling systems
• EN 10343:2009 ; Steels for quenching and tempering for construction purposes – Technical delivery conditions
• EN 1034-3:2011 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Rereelers and winders
• EN 1034-4:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities
• EN 1034-5:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 5: Sheeters
• EN 1034-6:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 6: Calender
• EN 1034-7:2005+A1:2009 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 7: Chests
• EN 1034-8:2012 ; Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 8: Refining plants
• EN 1036-2:2008 ; Glass in building – Mirrors from silver-coated float glass for internal use – Part 2: Evaluation of conformity; product standard
• EN 1037:1995+A1:2008 ; Safety of machinery – Prevention of unexpected start-up
• EN 1041:2008 ; Information supplied by the manufacturer of medical devices
• EN 1051-2:2007 ; Glass in building – Glass blocks and glass pavers – Part 2: Evaluation of conformity/Product standard
• EN 1057:2006+A1:2010 ; Copper and copper alloys – Seamless, round copper tubes for water and gas in sanitary and heating applications
• EN 1060-3:1997+A2:2009 ; Non-invasive sphygmomanometers – Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems
• EN 1060-4:2004 ; Non-invasive sphygmomanometers – Part 4: Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers
• EN 1073-1:1998 ; Protective clothing against radioactive contamination – Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactivate contamination
• EN 1073-2:2002 ; Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
• EN 1077:2007 ; Helmets for alpine skiers and snowboarders
• EN 1078:2012+A1:2012 (new) ; Helmets for pedal cyclists and for users of skateboards and roller skates
• EN 1080:1997 ; Impact protection helmets for young children
• EN 1082-1:1996 ; Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards
• EN 1082-2:2000 ; Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail
• EN 1082-3:2000 ; Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 3: Impact cut test for fabric, leather and other materials
• EN 1088:1995+A2:2008 ; Safety of machinery – Interlocking devices associated with guards – Principles for design and selection
• EN 1090-1:2009+A1:2011 (new) ; Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
• EN 1092-1:2007 ; Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 1: Steel flanges
• EN 1092-3:2003 ; Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges
• EN 1092-3:2003/AC:2007 ; EN 1092-4:2002
• EN 1092-4:2002 ; Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges
• EN 1093-1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 1: Selection of test methods
• EN 1093-11:2001+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 11: Decontamination index
• EN 1093-2:2006+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
• EN 1093-3:2006+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 3: Test bench method for the measurement of the emission rate of a given pollutant
• EN 1093-4:1996+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 4: Capture efficiency of an exhaust system – Tracer method
• EN 1093-6:1998+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 6: Separation efficiency by mass, unducted outlet
• EN 1093-7:1998+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet
• EN 1093-8:1998+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 8: Pollutant concentration parameter, test bench method
• EN 1093-9:1998+A1:2008 ; Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 9: Pollutant concentration parameter, room method
• EN 1096-4:2004 ; Glass in building – Coated glass – Part 4: Evaluation of conformity/Product standard
• EN 1106:2010 (new) ; Manually operated taps for gas burning appliances
• EN 1114-1:2011 ; Plastics and rubber machines – Extruders and extrusion lines – Part 1: Safety requirements for extruders
• EN 1114-3:2001+A1:2008 ; Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs
• EN 1123-1:1999 ; Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems – Part 1: Requirements, testing, quality control
• EN 1123-1:1999/A1:2004 ; EN 1124-1:1999
• EN 1124-1:1999 ; Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems – Part 1: Requirements, testing, quality control
• EN 1124-1:1999/A1:2004 ; EN 1125:2008
• EN 1125:2008 ; Building hardware – Panic exit devices operated by a horizontal bar, for use on escape routes – Requirements and test methods
• EN 1127-1:2011 ; Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology
• EN 1127-2:2002+A1:2008 ; Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for mining
• EN 1129-1:1995 ; Furniture – Foldaway beds – Safety requirements and testing – Part 1: Safety requirements
• EN 1129-2:1995 ; Furniture – Foldaway beds – Safety requirements and testing – Part 2: Test methods
• EN 1130-1:1996 ; Furniture – Cribs and cradles for domestic use – Part 1: Safety requirements
• EN 1130-2:1996 ; Furniture – Cribs and cradles for domestic use – Part 2: Test methods
• EN 1146:2005 ; Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking
• EN 1149-1:2006 ; Protective clothing – Electrostatic properties – Part 1: Test method for measurement of surface resistivity
• EN 1149-2:1997 ; Protective clothing – Electrostatic properties – Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
• EN 1149-3:2004 ; Protective clothing – Electrostatic properties – Part 3: Test methods for measurement of charge decay
• EN 1149-5:2008 ; Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements
• EN 1150:1999 ; Protective clothing – Visibility clothing for non-professional use – Test methods and requirements
• EN 115-1:2008+A1:2010 ; Safety of escalators and moving walks – Part 1: Construction and installation
• EN 1154:1996 ; Building hardware – Controlled door closing devices – Requirements and test methods
• EN 1154:1996/A1:2002 ; EN 1154:1996/A1:2002/AC:2006
• EN 1154:1996/A1:2002/AC:2006 ; EN 1155:1997
• EN 1155:1997 ; Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods
• EN 1155:1997/A1:2002 ; EN 1155:1997/A1:2002/AC:2006
• EN 1155:1997/A1:2002/AC:2006 ; EN 1158:1997
• EN 1158:1997 ; Building hardware – Door coordinator devices – Requirements and test methods
• EN 1158:1997/A1:2002 ; EN 1158:1997/A1:2002/AC:2006
• EN 1158:1997/A1:2002/AC:2006 ; EN 1168:2005+A3:2011 (new)
• EN 1168:2005+A3:2011 (new) ; Precast concrete products – Hollow core slabs
• EN 1171:2002 ; Industrial valves – Cast iron gate valves
• EN 1175-1:1998+A1:2010 ; Safety of industrial trucks – Electrical requirements – Part 1: General requirements for battery powered trucks
• EN 1175-2:1998+A1:2010 ; Safety of industrial trucks – Electrical requirements – Part 2: General requirements of internal combustion engine powered trucks
• EN 1175-3:1998+A1:2010 ; Safety of industrial trucks – Electrical requirements – Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
• EN 1196:1998 ; Domestic and non-domestic gas-fired air heaters – Supplementary requirements for condensing air heaters
• EN 12001:2012 (new) ; Conveying, spraying and placing machines for concrete and mortar – Safety requirements
• EN 12004:2007 ; Adhesives for tiles – Requirements, evaluation of conformity, classification and designation
• EN 12006-2:1998+A1:2009 ; Non active surgical implants – Particular requirements for cardiac and vascular implants – Part 2: Vascular prostheses including cardiac valve conduits
• EN 12012-1:2007+A1:2008 ; Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators
• EN 12012-3:2001+A1:2008 ; Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders
• EN 12012-4:2006+A1:2008 ; Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators
• EN 12013:2000+A1:2008 ; Plastics and rubber machines – Internal mixers – Safety requirements
• EN 12015:2004 ; Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Emission
• EN 12016:2004+A1:2008 ; Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity
• EN 12041:2000+A1:2009 ; Food processing machinery – Moulders – Safety and hygiene requirements
• EN 12042:2005+A1:2010 ; Food processing machinery – Automatic dividers – Safety and hygiene requirements
• EN 12043:2000+A1:2010 ; Food processing machinery – Intermediate provers – Safety and hygiene requirements
• EN 12044:2005+A1:2009 ; Footwear, leather and imitation leather goods manufacturing machines – Cutting and punching machines – Safety requirements
• EN 12050-1:2001 ; Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 1: Lifting plants for wastewater containing faecal matter
• EN 12050-2:2000 ; Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 2: Lifting plants for faecal-free wastewater
• EN 12050-3:2000 ; Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 3: Lifting plants for wastewater containing faecal matter for limited applications
• EN 12050-4:2000 ; Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
• EN 12053:2001+A1:2008 ; Safety of industrial trucks – Test methods for measuring noise emissions
• EN 12057:2004 ; Natural stone products – Modular tiles – Requirements
• EN 12058:2004 ; Natural stone products – Slabs for floors and stairs – Requirements
• EN 12067-1:1998 ; Gas/air ratio controls for gas burners and gas burning appliances – Part 1: Pneumatic types
• EN 12067-2:2004 ; Gas/air ratio controls for gas burners and gas burning appliances – Part 2: Electronic types
• EN 12077-2:1998+A1:2008 ; Cranes safety – Requirements for health and safety – Part 2: Limiting and indicating devices
• EN 12078:1998 ; Zero governors for gas burners and gas burning appliances
• EN 12080:2007+A1:2010 ; Railway applications – Axleboxes – Rolling bearings
• EN 12081:2007+A1:2010 ; Railway applications – Axleboxes – Lubricating greases
• EN 12082:2007+A1:2010 ; Railway applications – Axleboxes – Performance testing
• EN 12083:1998 ; Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking
• EN 12083:1998/AC:2000 ; EN ISO 12127-2:2007
• EN 12094-1:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 1: Requirements and test methods for electrical automatic control and delay devices
• EN 12094-10:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 10: Requirements and test methods for pressure gauges and pressure switches
• EN 12094-11:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 11: Requirements and test methods for mechanical weighing devices
• EN 12094-12:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 12: Requirements and test methods for pneumatic alarm devices
• EN 12094-13:2001 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 13: Requirements and test methods for check valves and non-return valves
• EN 12094-13:2001/AC:2002 ; EN 12101-1:2005
• EN 12094-2:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 2: Requirements and test methods for non-electrical automatic control and delay devices
• EN 12094-3:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 3: Requirements and test methods for manual triggering and stop devices
• EN 12094-4:2004 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 4: Requirements and test methods for container valve assemblies and their actuators
• EN 12094-5:2006 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
• EN 12094-6:2006 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 6: Requirements and test methods for non-electrical disable devices
• EN 12094-7:2000 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 7: Requirements and test methods for nozzles for CO2 systems
• EN 12094-7:2000/A1:2005 ; EN 12094-8:2006
• EN 12094-8:2006 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 8: Requirements and test methods for connectors
• EN 12094-9:2003 ; Fixed firefighting systems – Components for gas extinguishing systems – Part 9: Requirements and test methods for special fire detectors
• EN 12101-1:2005 ; Smoke and heat control systems – Part 1: Specification for smoke barriers
• EN 12101-1:2005/A1:2006 ; EN 12101-2:2003
• EN 12101-10:2005 ; Smoke and heat control systems – Part 10: Power supplies
• EN 12101-10:2005/AC:2007 ; EN 12150-2:2004
• EN 12101-2:2003 ; Smoke and heat control systems – Part 2: Specification for natural smoke and heat exhaust ventilators
• EN 12101-3:2002 ; Smoke and heat control systems – Part 3: Specification for powered smoke and heat exhaust ventilators
• EN 12101-3:2002/AC:2005 ; EN 12101-6:2005
• EN 12101-6:2005 ; Smoke and heat control systems – Part 6: Specification for pressure differential systems – Kits
• EN 12101-6:2005/AC:2006 ; EN 12101-7:2011
• EN 12101-7:2011 ; Smoke and heat control systems – Part 7: Smoke duct sections
• EN 12101-8:2011 ; Smoke and heat control systems – Part 8: Smoke control dampers
• EN 12110:2002+A1:2008 ; Tunnelling machines – Air locks – Safety requirements
• EN 12111:2002+A1:2009 ; Tunnelling machines – Road headers, continuous miners and impact rippers – Safety requirements
• EN 12150-2:2004 ; Glass in building – Thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard
• EN 12158-1:2000+A1:2010 ; Builders’ hoists for goods – Part 1: Hoists with accessible platforms
• EN 12158-2:2000+A1:2010 ; Builders’ hoists for goods – Part 2: Inclined hoists with non-accessible load carrying devices
• EN 12159:2000+A1:2009 ; Builders hoists for persons and materials with vertically guided cages
• EN 12162:2001+A1:2009 ; Liquid pumps – Safety requirements – Procedure for hydrostatic testing
• EN 12178:2003 ; Refrigerating systems and heat pumps – Liquid level indicating devices – Requirements, testing and marking
• EN 1218-1:1999+A1:2009 ; Safety of woodworking machines – Tenoning machines – Part 1: Single end tenoning machines with sliding table
• EN 1218-2:2004+A1:2009 ; Safety of woodworking machines – Tenoning machines – Part 2: Double end tenoning and/or profiling machines fed by chain or chains
• EN 1218-3:2001+A1:2009 ; Safety of woodworking machines – Tenoning machines – Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
• EN 12183:2009 ; Manual wheelchairs – Requirements and test methods
• EN 1218-4:2004+A2:2009 ; Safety of woodworking machines – Tenoning machines – Part 4: Edge banding machines fed by chain(s)
• EN 12184:2009 ; Electrically powered wheelchairs, scooters and their chargers – Requirements and test methods
• EN 1218-5:2004+A1:2009 ; Safety of woodworking machines – Tenoning machines – Part 5: One side profiling machines with fixed table and feed rollers or feed chain
• EN 12196:2003 ; Gymnastic equipment – Horses and bucks – Functional and safety requirements, test methods
• EN 12197:1997 ; Gymnastic equipment – Horizontal bars – Safety requirements and test methods
• EN 12198-1:2000+A1:2008 ; Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 1: General principles
• EN 12198-2:2002+A1:2008 ; Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 2: Radiation emission measurement procedure
• EN 12198-3:2002+A1:2008 ; Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 3: Reduction of radiation by attenuation or screening
• EN 12203:2003+A1:2009 ; Footwear, leather and imitation leather goods manufacturing machines – Shoe and leather presses – Safety requirements
• EN 12209:2003 ; Building hardware – Locks and latches – Mechanically operated locks, latches and locking plates – Requirements and test methods
• EN 12209:2003/AC:2005 ; EN 12259-1:1999 + A1:2001
• EN 12244-1:1998 ; Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW – Part 1: Safety
• EN 12244-2:1998 ; Direct gas-fired washing machines of nominal heat input not exceeding 20 kW – Part 2: Rational use of energy
• EN 12254:2010 ; Screens for laser working places – Safety requirements and testing
• EN 12254:2010/AC:2011 ; EN 12267:2003+A1:2010
• EN 12259-1:1999 + A1:2001 ; Fixed firefighting systems – Components for sprinkler and water spray systems – Part 1: Sprinklers
• EN 12259-1:1999 + A1:2001/A2:2004 ; EN 12259-1:1999 + A1:2001/A3:2006
• EN 12259-1:1999 + A1:2001/A3:2006 ; EN 12259-2:1999
• EN 12259-2:1999 ; Fixed firefighting systems – Components for sprinkler and water spray systems – Part 2: Wet alarm valve assemblies
• EN 12259-2:1999/A1:2001 ; EN 12259-2:1999/A2:2005
• EN 12259-2:1999/A2:2005 ; EN 12259-2:1999/AC:2002
• EN 12259-2:1999/AC:2002 ; EN 12259-3:2000
• EN 12259-3:2000 ; Fixed firefighting systems – Components for automatic sprinkler and water spray systems – Part 3: Dry alarm valve assemblies
• EN 12259-3:2000/A1:2001 ; EN 12259-3:2000/A2:2005
• EN 12259-3:2000/A2:2005 ; EN 12259-4:2000
• EN 12259-4:2000 ; Fixed firefighting systems – Components for sprinkler and water spray systems – Part 4: Water motor alarms
• EN 12259-4:2000/A1:2001 ; EN 12259-5:2002
• EN 12259-5:2002 ; Fixed firefighting systems – Components for sprinkler and water spray systems – Part 5: Water flow detectors
• EN 12261:2002 ; Gas meters – Turbine gas meters
• EN 12261:2002/A1:2006 ; EN 12261:2002/AC:2003
• EN 12261:2002/AC:2003 ; EN 12405-1:2005+A2:2010
• EN 12263:1998 ; Refrigerating systems and heat pumps – Safety switching devices for limiting the pressure – Requirements and tests
• EN 12266-1:2012 (new) ; Industrial valves – Testing of metallic valves – Part 1: Pressure tests, test procedures and acceptance criteria – Mandatory requirements
• EN 12267:2003+A1:2010 ; Food processing machinery – Circular saw machines – Safety and hygiene requirements
• EN 12268:2003+A1:2010 ; Food processing machinery – Band saw machines – Safety and hygiene requirements
• EN 12270:1998 ; Mountaineering equipment – Chocks – Safety requirements and test methods
• EN 12271:2006 ; Surface dressing – Requirements
• EN 12273:2008 ; Slurry surfacing – Requirements
• EN 12275:1998 ; Mountaineering equipment – Connectors – Safety requirements and test methods
• EN 12276:1998 ; Mountaineering equipment – Frictional anchors – Safety requirements and test methods
• EN 12276:1998/AC:2000 ; EN 12277:2007
• EN 12277:2007 ; Mountaineering equipment – Harnesses – Safety requirements and test methods
• EN 12278:2007 ; Montaineering equipment – Pulleys – Safety requirements and test methods
• EN 12284:2003 ; Refrigerating systems and heat pumps – Valves – Requirements, testing and marking
• EN 12285-2:2005 ; Workshop fabricated steel tanks – Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
• EN 12288:2010 ; Industrial valves – Copper alloy gate valves
• EN 12301:2000+A1:2008 ; Plastics and rubber machines – Calenders – Safety requirements
• EN 12309-1:1999 ; Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW – Part 1: Safety
• EN 12309-2:2000 ; Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW – Part 2: Rational use of energy
• EN 12312-1:2001+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs
• EN 12312-10:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 10: Container/Pallet transfer transporters
• EN 12312-12:2002+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 12: Potable water service equipment
• EN 12312-13:2002+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 13: Lavatory service equipment
• EN 12312-14:2006+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 14: Disabled/incapacitated passenger boarding vehicles
• EN 12312-15:2006+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 15: Baggage and equipment tractors
• EN 12312-16:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 16: Air start equipment
• EN 12312-17:2004+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 17: Air conditioning equipment
• EN 12312-18:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 18: Nitrogen or Oxygen units
• EN 12312-19:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
• EN 12312-2:2002+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 2: Catering vehicles
• EN 12312-20:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 20: Electrical ground power units
• EN 12312-3:2003+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles
• EN 12312-4:2003+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding bridges
• EN 12312-5:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment
• EN 12312-6:2004+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 6: Deicers and deicing/antiicing equipment
• EN 12312-7:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 7: Air-craft movement equipment
• EN 12312-8:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms
• EN 12312-9:2005+A1:2009 ; Aircraft ground support equipment – Specific requirements – Part 9: Container/Pallet loaders
• EN 12321:2003+A1:2009 ; Underground mining machinery – Specification for the safety requirements of armoured face conveyors
• EN 12322:1999 ; In vitro diagnostic medical devices – Culture media for microbiology – Performance criteria for culture media
• EN 12326-1:2004 ; Slate and stone products for discontinuous roofing and cladding – Part 1: Product specification
• EN 12331:2003+A2:2010 ; Food processing machinery – Mincing machines – Safety and hygiene requirements
• EN 12334:2001 ; Industrial valves – Cast iron check valves
• EN 12334:2001/AC:2002 ; EN 12392:2000
• EN 12336:2005+A1:2008 ; Tunnelling machines – Shield machines, thrust boring machines, auger boring machines, lining erection equipment – Safety requirements
• EN 12337-2:2004 ; Glass in building – Chemically strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard
• EN 12342:1998+A1:2009 ; Breathing tubes intended for use with anaesthetic apparatus and ventilators
• EN 12346:1998 ; Gymnastic equipment – Wall bars, lattice ladders and climbing frames – Safety requirements and test methods
• EN 12348:2000+A1:2009 ; Core drilling machines on stand – Safety
• EN 12352:2006 ; Traffic control equipment – Warning and safety light devices
• EN 12355:2003+A1:2010 ; Food processing machinery – Derinding-, skinning- and membrane removal machines – Safety and hygiene requirements
• EN 12368:2006 ; Traffic control equipment – Signal heads
• EN 12380:2002 ; Air admittance valves for drainage systems – Requirements, tests methods and evaluation of conformity
• EN 12385-1:2002+A1:2008 ; Steel wire ropes – Safety – Part 1: General requirements
• EN 12385-10:2003+A1:2008 ; Steel wire ropes – Safety – Part 10: Spiral ropes for general structural applications
• EN 12385-2:2002+A1:2008 ; Steel wire ropes – Safety – Part 2: Definitions, designation and classification
• EN 12385-3:2004+A1:2008 ; Steel wire ropes – Safety – Part 3: Information for use and maintenance
• EN 12385-4:2002+A1:2008 ; Steel wire ropes – Safety – Part 4: Stranded ropes for general lifting applications
• EN 12385-5:2002 ; Steel wire ropes – Safety – Part 5: Stranded ropes for lifts
• EN 12385-5:2002/AC:2005 ; EN 13015:2001+A1:2008
• EN 12385-8:2002 ; Steel wire ropes – Safety – Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
• EN 12385-9:2002 ; Steel wire ropes – Safety – Part 9: Locked coil carrying ropes for cableway installations designed to carry persons
• EN 12387:2005+A1:2009 ; Footwear, leather and imitation leather goods manufacturing machines – Modular shoe repair equipment – Safety requirements
• EN 12392:2000 ; Aluminium and aluminium alloys – Wrought products – Special requirements for products intended for the production of pressure equipment
• EN 12397:2004 ; Safety requirements for cableway installations designed to carry persons – Operation
• EN 12405-1:2005+A2:2010 ; Gas meters – Conversion devices – Part 1: Volume conversion
• EN 12409:2008+A1:2011 ; Plastics and rubber machines – Thermoforming machines – Safety requirements
• EN 12417:2001+A2:2009 ; Machine tools – Safety – Machining centres
• EN 12417:2001+A2:2009/AC:2010 ; EN 12418:2000+A1:2009
• EN 12418:2000+A1:2009 ; Masonry and stone cutting-off machines for job site – Safety
• EN 12420:1999 ; Copper and copper alloys – Forgings
• EN 12432:1998 ; Gymnastic equipment – Balancing beams – Functional and safety requirements, test methods
• EN 12434:2000 ; Cryogenic vessels – Cryogenic flexible hoses
• EN 12434:2000/AC:2001 ; EN 12451:2012 (new)
• EN 12446:2011 ; Chimneys – Components – Concrete outer wall elements
• EN 12451:2012 (new) ; Copper and copper alloys – Seamless, round tubes for heat exchangers
• EN 12452:2012 (new) ; Copper and copper alloys – Rolled, finned, seamless tubes for heat exchangers
• EN 12463:2004+A1:2011 ; Food processing machinery – Filling machines and auxiliary machines – Safety and hygiene requirements
• EN 12467:2004 ; Fibre-cement flat sheets – Product specification and test methods
• EN 12467:2004/A1:2005 ; EN 12467:2004/A2:2006
• EN 12467:2004/A2:2006 ; EN 12566-1:2000
• EN 1247:2004+A1:2010 ; Foundry machinery – Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
• EN 12470-1:2000+A1:2009 ; Clinical thermometers – Part 1: Metallic liquid-in-glass thermometers with maximum device
• EN 12470-2:2000+A1:2009 ; Clinical thermometers – Part 2: Phase change type (dot matrix) thermometers
• EN 12470-3:2000+A1:2009 ; Clinical thermometers – Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
• EN 12470-4:2000+A1:2009 ; Clinical thermometers – Part 4: Performance of electrical thermometers for continuous measurement
• EN 12470-5:2003 ; Clinical thermometers – Part 5: Performance of infra-red ear thermometers (with maximum device)
• EN 12477:2001 ; Protective gloves for welders
• EN 1248:2001+A1:2009 ; Foundry machinery – Safety requirements for abrasive blasting equipment
• EN 12480:2002 ; Gas meters – Rotary displacement gas meters
• EN 12480:2002/A1:2006 ; EN 14154-1:2005+A2:2011
• EN 12491:2001 ; Paragliding equipment – Emergency parachutes – Safety requirements and test methods
• EN 12492:2012 (new) ; Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods
• EN 125:2010 (new) ; Flame supervision devices for gas burning appliances – Thermoelectric flame supervision devices
• EN 12505:2000+A1:2009 ; Food processing machinery – Centrifugal machines for processing edible oils and fats – Safety and hygiene requirements
• EN 12516-1:2005 ; Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells
• EN 12516-1:2005/AC:2007 ; EN 12516-2:2004
• EN 12516-2:2004 ; Industrial valves – Shell design strength – Part 2: Calculation method for steel valve shells
• EN 12516-3:2002 ; Valves – Shell design strength – Part 3: Experimental method
• EN 12516-3:2002/AC:2003 ; EN 12516-4:2008
• EN 12516-4:2008 ; Industrial valves – Shell design strength – Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
• EN 1252-1:1998 ; Cryogenic vessels – Materials – Part 1: Toughness requirements for temperatures below -80°C
• EN 1252-1:1998/AC:1998 ; EN 1252-2:2001
• EN 1252-2:2001 ; Cryogenic vessels – Materials – Part 2: Toughness requirements for temperatures between -80°C and -20°C
• EN 12525:2000+A2:2010 ; Agricultural machinery – Front loaders – Safety
• EN 12542:2010 ; LPG equipment and accessories – Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ – Design and manufacture
• EN 12545:2000+A1:2009 ; Footwear, leather and imitation leather goods manufacturing machines – Noise test code – Common requirements
• EN 12547:1999+A1:2009 ; Centrifuges – Common safety requirements
• EN 12549:1999+A1:2008 ; Acoustics – Noise test code for fastener driving tools – Engineering method
• EN 12566-1:2000 ; Small wastewater treatment systems for up to 50 PT – Part 1: Prefabricated septic tanks
• EN 12566-1:2000/A1:2003 ; EN 12566-3:2005+A1:2009
• EN 12566-3:2005+A1:2009 ; Small wastewater treatment systems for up to 50 PT – Part 3: Packaged and/or site assembled domestic wastewater treatment plants
• EN 12566-4:2007 ; Small wastewater treatment systems for up to 50 PT – Part 4: Septic tanks assembled in situ from prefabricated kits
• EN 12581:2005+A1:2010 ; Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements
• EN 12586:1999 ; Child care articles – Soother holder – Safety requirements and test methods
• EN 12586:1999/AC:2002 ; EN 12655:1998
• EN 12591:2009 ; Bitumen and bituminous binders – Specifications for paving grade bitumens
• EN 126:2004 ; Multifunctional controls for gas burning appliances
• EN 12601:2010 ; Reciprocating internal combustion engine driven generating sets – Safety
• EN 12620:2002+A1:2008 ; Aggregates for concrete
• EN 12621:2006+A1:2010 ; Machinery for the supply and circulation of coating materials under pressure – Safety requirements
• EN 12622:2009 ; Safety of machine tools – Hydraulic press brakes
• EN 12628:1999 ; Diving accessories – Combined buoyancy and rescue devices – Functional and safety requirements, test methods
• EN 12628:1999/AC:2000 ; EN 12841:2006
• EN 12629-1:2000+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 1: Common requirements
• EN 12629-2:2002+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 2: Block making machines
• EN 12629-3:2002+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 3: Slide and turntable machines
• EN 12629-4:2001+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 4:Concrete roof tile making machines
• EN 12629-5-1:2003+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis
• EN 12629-5-2:2003+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis
• EN 12629-5-3:2003+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines
• EN 12629-5-4:2003+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines
• EN 12629-6:2004+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
• EN 12629-7:2004+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
• EN 12629-8:2002+A1:2010 ; Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
• EN 12635:2002+A1:2008 ; Industrial, commercial and garage doors and gates – Installation and use
• EN 12643:1997+A1:2008 ; Earth-moving machinery – Rubber-tyred machines – Steering requirements (ISO 5010:1992 modified)
• EN 12644-1:2001+A1:2008 ; Cranes – Information for use and testing – Part 1: Instructions
• EN 12644-2:2000+A1:2008 ; Cranes – Information for use and testing – Part 2: Marking
• EN 12649:2008+A1:2011 ; Concrete compactors and smoothing machines – Safety
• EN 1265:1999+A1:2008 ; Safety of machinery – Noise test code for foundry machines and equipment
• EN 12653:1999+A2:2009 ; Footwear, leather and imitation leather manufacturing machines – Nailing machines – Safety requirements
• EN 12655:1998 ; Gymnastic equipment – Hanging rings – Functional and safety requirements, test methods
• EN 1266:2002 ; Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
• EN 12663-1:2010 ; Railway applications – Structural requirements of railway vehicle bodies – Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
• EN 12663-2:2010 ; Railway applications – Structural requirements of railway vehicle bodies – Part 2: Freight wagons
• EN 12669:2000 ; Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating
• EN 12676-1:2000 ; Anti-glare systems for roads – Part 1: Performance and characteristics
• EN 12676-1:2000/A1:2003 ; EN 12737:2004+A1:2007
• EN 12693:2008 ; Refrigerating systems and heat pumps – Safety and environmental requirements – Positive displacement refrigerant compressors
• EN 12717:2001+A1:2009 ; Safety of machine tools – Drilling machines
• EN 1273:2005 ; Child use and care articles – Baby walking frames – Safety requirements and test methods
• EN 12733:2001+A1:2009 ; Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety
• EN 12735-1:2010 ; Copper and copper alloys – Seamless, round copper tubes for air conditioning and refrigeration – Part 1: Tubes for piping systems
• EN 12735-2:2010 ; Copper and copper alloys – Seamless, round copper tubes for air conditioning and refrigeration – Part 2: Tubes for equipment
• EN 12737:2004+A1:2007 ; Precast concrete products – Floor slats for livestock
• EN 12750:2001+A1:2009 ; Safety of woodworking machines – Four-sided moulding machines
• EN 12752-1:1999 ; Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW – Part 1: Safety
• EN 12752-2:1999 ; Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW – Part 2: Rational use of energy
• EN 12753:2005+A1:2010 ; Thermal cleaning systems for exhaust gas from surface treatment equipment – Safety requirements
• EN 12757-1:2005+A1:2010 ; Mixing machinery for coating materials – Safety requirements – Part 1: Mixing machinery for use in vehicle refinishing
• EN 12764:2004+A1:2008 ; Sanitary appliances – Specification for whirlpool baths
• EN 12778:2002 ; Cookware – Pressure cookers for domestic use
• EN 12778:2002/AC:2003 ; EN 12952-1:2001
• EN 12779:2004+A1:2009 ; Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety related performances and safety requirements
• EN 12794:2005+A1:2007 ; Precast concrete products – Foundation piles
• EN 12794:2005+A1:2007/AC:2008 ; EN 12809:2001
• EN 1279-5:2005+A2:2010 ; Glass in building – Insulating glass units – Part 5: Evaluation of conformity
• EN 12809:2001 ; Residential independent boilers fired by solid fuel – Nominal heat output up to 50 kW – Requirements and test methods
• EN 12809:2001/A1:2004 ; EN 12809:2001/AC:2006
• EN 12809:2001/A1:2004/AC:2007 ; EN 12815:2001
• EN 12809:2001/AC:2006 ; EN 12809:2001/A1:2004/AC:2007
• EN 12815:2001 ; Residential cookers fired by solid fuel – Requirements and test methods
• EN 12815:2001/A1:2004 ; EN 12815:2001/AC:2006
• EN 12815:2001/A1:2004/AC:2007 ; EN 12839:2012 (new)
• EN 12815:2001/AC:2006 ; EN 12815:2001/A1:2004/AC:2007
• EN 1282-2:2005+A1:2009 ; Tracheostomy tubes – Part 2: Paediatric tubes (ISO 5366-3:2001, modified)
• EN 12839:2012 (new) ; Precast concrete products – Elements for fences
• EN 12841:2006 ; Personal fall protection equipment – Rope access systems – Rope adjustment devices
• EN 12843:2004 ; Precast concrete products – Masts and poles
• EN 12851:2005+A1:2010 ; Food processing machinery – Catering attachments for machines having an auxiliary drive hub – Safety and hygiene requirements
• EN 12852:2001+A1:2010 ; Food processing machinery – Food processors and blenders – Safety and hygiene requirements
• EN 12853:2001+A1:2010 ; Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements
• EN 12853:2001+A1:2010/AC:2010 ; EN 12854:2003+A1:2010
• EN 12854:2003+A1:2010 ; Food processing machinery – Beam mixers – Safety and hygiene requirements
• EN 12855:2003+A1:2010 ; Food processing machinery – Rotating bowl cutters – Safety and hygiene requirements
• EN 12859:2011 ; Gypsum blocks – Definitions, requirements and test methods
• EN 12860:2001 ; Gypsum based adhesives for gypsum blocks – Definitions, requirements and test methods
• EN 12860:2001/AC:2002 ; EN 12878:2005
• EN 12864:2001 ; Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
• EN 12878:2005 ; Pigments for the colouring of building materials based on cement and/or lime – Specifications and methods of test
• EN 12878:2005/AC:2006 ; EN 12899-1:2007
• EN 12881-1:2005+A1:2008 ; Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests
• EN 12881-2:2005+A1:2008 ; Conveyor belts – Fire simulation flammability testing – Part 2: Large scale fire test
• EN 12882:2008 ; Conveyor belts for general purpose use – Electrical and flammability safety requirements
• EN 12895:2000 ; Industrial trucks – Electromagnetic compatibility
• EN 12899-1:2007 ; Fixed, vertical road traffic signs – Part 1: Fixed signs
• EN 12899-2:2007 ; Fixed, vertical road traffic signs – Part 2: Transilluminated traffic bollards (TTB)
• EN 12899-3:2007 ; Fixed, vertical road traffic signs – Part 3: Delineator posts and retroreflectors
• EN 12921-1:2005+A1:2010 ; Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 1: Common safety requirements
• EN 12921-2:2005+A1:2008 ; Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 2: Safety of machines using water based cleaning liquids
• EN 12921-3:2005+A1:2008 ; Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 3: Safety of machines using flammable cleaning liquids
• EN 12921-4:2005+A1:2008 ; Machines for surface cleaning and pretreatment of industrial items using liquids and vapours – Part 4: Safety of machines using halogenated solvents
• EN 12927-1:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 1: Selection criteria for ropes and their end fixings
• EN 12927-2:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 2: Safety factors
• EN 12927-3:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes
• EN 12927-4:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 4: End fixings
• EN 12927-5:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 5: Storage, transportation, installation and tensioning
• EN 12927-6:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 6: Discard criteria
• EN 12927-7:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 7: Inspection, repair and maintenance
• EN 12927-8:2004 ; Safety requirements for cableway installations designed to carry persons – Ropes – Part 8: Magnetic rope testing (MRT)
• EN 12929-1:2004 ; Safety requirements for cableway installations designed to carry persons – General requirements – Part 1: Requirements for all installations
• EN 12929-2:2004 ; Safety requirements for cableway installations designed to carry persons – General requirements – Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
• EN 12930:2004 ; Safety requirements for cableway installations designed to carry persons – Calculations
• EN 12941:1998 ; Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking
• EN 12942:1998 ; Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking
• EN 12951:2004 ; Prefabricated accessories for roofing – Permanently fixed roof ladders – Product specification and test methods
• EN 12952-1:2001 ; Water-tube boilers and auxiliary installations – Part 1: General
• EN 12952-10:2002 ; Water-tube boilers and auxiliary installations – Part 10: Requirements for safeguards against excessive pressure
• EN 12952-11:2007 ; Water-tube boilers and auxiliary installations – Part 11: Requirements for limiting devices of the boiler and accessories
• EN 12952-14:2004 ; Water-tube boilers and auxiliary installations – Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution
• EN 12952-16:2002 ; Water-tube boilers and auxiliary installations – Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
• EN 12952-2:2011 ; Water-tube boilers and auxiliary installations – Part 2: Materials for pressure parts of boilers and accessories
• EN 12952-3:2011 ; Water-tube boilers and auxiliary installations – Part 3: Design and calculation for pressure parts of the boiler
• EN 12952-5:2011 ; Water-tube boilers and auxiliary installations – Part 5: Workmanship and construction of pressure parts of the boiler
• EN 12952-6:2011 ; Water-tube boilers and auxiliary installations – Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
• EN 12952-7:2002 ; Water-tube boilers and auxiliary installations – Part 7: Requirements for equipment for the boiler
• EN 12952-8:2002 ; Water-tube boilers and auxiliary installations – Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
• EN 12952-9:2002 ; Water-tube boilers and auxiliary installations – Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
• EN 12953-1:2012 (new) ; Shell boilers – Part 1: General
• EN 12953-12:2003 ; Shell boilers – Part 12: Requirements for grate firing systems for solid fuels for the boiler
• EN 12953-13:2012 (new) ; Shell boilers – Part 13: Operating instructions
• EN 12953-2:2012 (new) ; Shell boilers – Part 2: Materials for pressure parts of boilers and accessories
• EN 12953-3:2002 ; Shell boilers – Part 3: Design and calculation for pressure parts
• EN 12953-4:2002 ; Shell boilers – Part 4: Workmanship and construction of pressure parts of the boiler
• EN 12953-5:2002 ; Shell boilers – Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
• EN 12953-6:2011 ; Shell Boilers – Part 6: Requirements for equipment for the boiler
• EN 12953-7:2002 ; Shell boilers – Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
• EN 12953-8:2001 ; Shell boilers – Part 8: Requirements for safeguards against excessive pressure
• EN 12953-8:2001/AC:2002 ; EN 12953-9:2007
• EN 12953-9:2007 ; Shell boilers – Part 9: Requirements for limiting devices of the boiler and accessories
• EN 12957:2001+A1:2009 ; Machine tools – Safety – Electro discharge machines
• EN 12965:2003+A2:2009 ; Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety
• EN 12966-1:2005+A1:2009 ; Road vertical signs – Variable message traffic signs – Part 1: Product standard
• EN 12978:2003+A1:2009 ; Industrial, commercial and garage doors and gates – Safety devices for power operated doors and gates – Requirements and test methods
• EN 12981:2005+A1:2009 ; Coating plants – Spray booths for application of organic powder coating material – Safety requirements
• EN 12984:2005+A1:2010 ; Food processing machinery – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements
• EN 1299:1997+A1:2008 ; Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation
• EN 12999:2011+A1:2012 ; Cranes – Loader cranes
• EN 13000:2010 ; Cranes – Mobile cranes
• EN 13000:2010/AC:2010 ; EN 13001-1:2004+A1:2009
• EN 13001-1:2004+A1:2009 ; Cranes – General design – Part 1: General principles and requirements
• EN 13001-1:2004+A1:2009/AC:2009 ; EN 13001-2:2011
• EN 13001-2:2011 ; Crane safety – General design – Part 2: Load actions
• EN 13001-2:2011/AC:2012 ; EN 13001-3-1:2012
• EN 13001-3-1:2012 ; Cranes – General Design – Part 3-1: Limit States and proof competence of steel structure
• EN 13012:2012 ; Petrol filling stations – Construction and performance of automatic nozzles for use on fuel dispensers
• EN 13015:2001+A1:2008 ; Maintenance for lifts and escalators – Rules for maintenance instructions
• EN 13019:2001+A1:2008 ; Machines for road surface cleaning – Safety requirements
• EN 13020:2004+A1:2010 ; Road surface treatment machines – Safety requirements
• EN 13021:2003+A1:2008 ; Winter service machines – Safety requirements
• EN 13023:2003+A1:2010 ; Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3
• EN 13024-2:2004 ; Glass in building – Thermally toughened borosilicate safety glass – Part 2: Evaluation of conformity/Product standard
• EN 13034:2005+A1:2009 ; Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
• EN 13035-1:2008 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 1: Storage, handling and transportation equipment inside the factory
• EN 13035-11:2006+A1:2010 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 11: Drilling machines
• EN 13035-2:2008 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 2: Storage, handling and transportation equipment outside the factory
• EN 13035-3:2003+A1:2009 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 3: Cutting machines
• EN 13035-3:2003+A1:2009/AC:2010 ; EN 13035-4:2003+A1:2009
• EN 13035-4:2003+A1:2009 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 4: Tilting tables
• EN 13035-5:2006+A1:2009 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 5: Machines and installations for stacking and de-stacking
• EN 13035-6:2006+A1:2009 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 6: Machines for break-out
• EN 13035-7:2006+A1:2009 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 7: Cutting machines for laminated glass
• EN 13035-9:2006+A1:2010 ; Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 9: Washing installations
• EN 1304:2005 ; Clay roofing tiles and fittings – Product definitions and specifications
• EN 13042-1:2007+A1:2009 ; Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 1: Gob feeder
• EN 13042-2:2004+A1:2009 ; Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 2: Handling machines for feeding
• EN 13042-3:2007+A1:2009 ; Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 3: IS machines
• EN 13042-5:2003+A1:2009 ; Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 5: Presses
• EN 13043:2002 ; Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
• EN 13043:2002/AC:2004 ; EN 13055-1:2002
• EN 13055-1:2002 ; Lightweight aggregates – Part 1: Lightweight aggregates for concrete, mortar and grout
• EN 13055-1:2002/AC:2004 ; EN 13055-2:2004
• EN 13055-2:2004 ; Lightweight aggregates – Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
• EN 13059:2002+A1:2008 ; Safety of industrial trucks – Test methods for measuring vibration
• EN 13060:2004+A2:2010 ; Small steam sterilizers
• EN 13061:2009 ; Protective clothing – Shin guards for association football players – Requirements and test methods
• EN 13063-1:2005+A1:2007 ; Chimneys – System chimneys with clay/ceramic flue liners – Part 1: Requirements and test methods for sootfire resistance
• EN 13063-2:2005+A1:2007 ; Chimneys – System chimneys with clay/ceramic flue liners – Part 2: Requirements and test methods under wet conditions
• EN 13063-3:2007 ; Chimneys – System chimneys with clay/ceramic flue liners – Part 3: Requirements and test methods for air flue system chimneys
• EN 13069:2005 ; Chimneys – Clay/ceramic outer walls for system chimneys – Requirements and test methods
• EN 13084-5:2005 ; Free-standing chimneys – Part 5: Material for brick liners – Product specifications
• EN 13084-5:2005/AC:2006 ; EN 13084-7:2005
• EN 13084-7:2005 ; Free-standing chimneys – Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
• EN 13084-7:2005/AC:2009 ; EN 13101:2002
• EN 13087-1:2000 ; Protective helmets – Test methods – Part 1: Conditions and conditioning
• EN 13087-10:2012 (new) ; Protective helmets – Test methods – Part 10: Resistance to radiant heat
• EN 13087-2:2012 (new) ; Protective helmets – Test methods – Part 2: Shock absorption
• EN 13087-3:2000 ; Protective helmets – Test methods – Part 3: Resistance to penetration
• EN 13087-4:2012 (new) ; Protective helmets – Test methods – Part 4: Retention system effectiveness
• EN 13087-5:2012 (new) ; Protective helmets – Test methods – Part 5: Retention system strength
• EN 13087-6:2012 (new) ; Protective helmets – Test methods – Part 6: Field of vision
• EN 13087-7:2000 ; Protective helmets – Test methods – Part 7: Flame resistance
• EN 13087-8:2000 ; Protective helmets – Test methods – Part 8: Electrical properties
• EN 13089:2011 ; Mountaineering equipment – Ice-tools – Safety requirements and test methods
• EN 13101:2002 ; Steps for underground man entry chambers – Requirements, marking, testing and evaluation of conformity
• EN 13102:2005+A1:2008 ; Ceramic machines – Safety – Loading and unloading of fine clay tiles
• EN 13103:2009+A1:2010 ; Railway applications – Wheelsets and bogies – Non-powered axles – Design method
• EN 13104:2009+A1:2010 ; Railway applications – Wheelsets and bogies – Powered axles – Design method
• EN 13107:2004 ; Safety requirements for cableway installations designed to carry persons – Civil engineering works
• EN 13108-1:2006 ; Bituminous mixtures – Material specifications – Part 1: Asphalt Concrete
• EN 13108-1:2006/AC:2008 ; EN 13108-2:2006
• EN 13108-2:2006 ; Bituminous mixtures – Material specifications – Part 2: Asphalt Concrete for very thin layers
• EN 13108-2:2006/AC:2008 ; EN 13108-3:2006
• EN 13108-3:2006 ; Bituminous mixtures – Material specifications – Part 3: Soft Asphalt
• EN 13108-3:2006/AC:2008 ; EN 13108-4:2006
• EN 13108-4:2006 ; Bituminous mixtures – Material specifications – Part 4: Hot Rolled Asphalt
• EN 13108-4:2006/AC:2008 ; EN 13108-5:2006
• EN 13108-5:2006 ; Bituminous mixtures – Material specifications – Part 5: Stone Mastic Asphalt
• EN 13108-5:2006/AC:2008 ; EN 13108-6:2006
• EN 13108-6:2006 ; Bituminous mixtures – Material specifications – Part 6: Mastic Asphalt
• EN 13108-6:2006/AC:2008 ; EN 13108-7:2006
• EN 13108-7:2006 ; Bituminous mixtures – Material specifications – Part 7: Porous Asphalt
• EN 13108-7:2006/AC:2008 ; EN 13139:2002
• EN 13112:2002+A1:2009 ; Tannery machines – Splitting and bandknife shearing machines – Safety requirements
• EN 13113:2002+A1:2010 ; Tannery machines – Roller coating machines – Safety requirements
• EN 13114:2002+A1:2009 ; Tannery machines – Rotating process vessels – Safety requirements
• EN 13118:2000+A1:2009 ; Agricultural machinery – Potato harvesting equipment – Safety
• EN 13120:2009 ; Internal blinds – Performance requirements including safety
• EN 13121-1:2003 ; GRP tanks and vessels for use above ground – Part 1: Raw materials – Specification conditions and acceptance conditions
• EN 13121-2:2003 ; GRP tanks and vessels for use above ground – Part 2: Composite materials – Chemical resistance
• EN 13121-3:2008+A1:2010 ; GRP tanks and vessels for use above ground – Part 3: Design and workmanship
• EN 13121-3:2008+A1:2010/AC:2011 ; EN 13134:2000
• EN 13128:2001+A2:2009 ; Safety of machine tools – Milling machines (including boring machines)
• EN 13128:2001+A2:2009/AC:2010 ; EN 13135-1:2003+A1:2010
• EN 13134:2000 ; Brazing – Procedure approval
• EN 13135-1:2003+A1:2010 ; Cranes – Equipment – Part 1: Electrotechnical equipment
• EN 13135-2:2004+A1:2010 ; Cranes – Equipment – Part 2: Non-electrotechnical equipment
• EN 13136:2001 ; Refrigerating systems and heat pumps – Pressure relief devices and their associated piping – Methods for calculation
• EN 13138-1:2008 ; Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn
• EN 13138-2:2002 ; Buoyant aids for swimming instruction – Part 2: Safety requirements and test methods for buoyant aids to be held
• EN 13139:2002 ; Aggregates for mortar
• EN 13139:2002/AC:2004 ; EN 13160-1:2003
• EN 13140:2000+A1:2009 ; Agricultural machinery – Sugar beet and fodder beet harvesting equipment – Safety
• EN 13155:2003+A2:2009 ; Cranes – Safety – Non-fixed load lifting attachments
• EN 13157:2004+A1:2009 ; Cranes – Safety – Hand powered cranes
• EN 13158:2009 ; Protective clothing – Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers – Requirements and test methods
• EN 13160-1:2003 ; Leak detection systems – Part 1: General principles
• EN 13162:2008 ; Thermal insulation products for buildings – Factory made mineral wool (MW) products – Specification
• EN 13163:2008 ; Thermal insulation products for buildings – Factory made products of expanded polystyrene (EPS) – Specification
• EN 13164:2008 ; Thermal insulation products for buildings – Factory made products of extruded polystyrene foam (XPS) – Specification
• EN 13165:2008 ; Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products – Specification
• EN 13166:2008 ; Thermal insulation products for buildings – Factory made products of phenolic foam (PF) – Specification
• EN 13167:2008 ; Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification
• EN 13168:2008 ; Thermal insulation products for buildings – Factory made wood wool (WW) products – Specification
• EN 13169:2008 ; Thermal insulation products for buildings – Factory made products of expanded perlite (EPB) – Specification
• EN 13170:2008 ; Thermal insulation products for buildings – Factory made products of expanded cork (ICB) – Specification
• EN 13171:2008 ; Thermal insulating products for buildings – Factory made wood fibre (WF) products – Specification
• EN 13175:2003+A2:2007 ; LPG equipment and accessories – Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
• EN 1317-5:2007+A2:2012 (new) ; Road restraint systems – Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
• EN 13178:2000 ; Personal eye-protection – Eye protectors for snowmobile users
• EN 1319:2009 ; Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
• EN 132:1998 ; Respiratory protective devices – Definitions of terms and pictograms
• EN 13204:2004+A1:2012 ; Double acting hydraulic rescue tools for fire and rescue service use – Safety and performance requirements
• EN 13208:2003+A1:2010 ; Food processing machinery – Vegetable peelers – Safety and hygiene requirements
• EN 13209-1:2004 ; Child use and care articles – Baby carriers – Safety requirements and test methods – Part 1: Framed back carriers
• EN 13218:2002+A1:2008 ; Machine tools – Safety – Stationary grinding machines
• EN 13218:2002+A1:2008/AC:2010 ; EN 13241-1:2003+A1:2011
• EN 13223:2004 ; Safety requirements for cableway installations designed to carry persons – Drive systems and other mechanical equipment
• EN 13224:2011 (new) ; Precast concrete products – Ribbed floor elements
• EN 13225:2004 ; Precast concrete products – Linear structural elements
• EN 13225:2004/AC:2006 ; EN 13229:2001
• EN 13229:2001 ; Inset appliances including open fires fired by solid fuels – Requirements and test methods
• EN 13229:2001/A1:2003 ; EN 13229:2001/A2:2004
• EN 13229:2001/A2:2004 ; EN 13229:2001/AC:2006
• EN 13229:2001/A2:2004/AC:2007 ; EN 13240:2001
• EN 13229:2001/AC:2006 ; EN 13229:2001/A2:2004/AC:2007
• EN 13230-1:2009 ; Railway applications – Track – Concrete sleepers and bearers – Part 1: General requirements
• EN 13230-2:2009 ; Railway applications – Track – Concrete sleepers and bearers – Part 2: Prestressed monoblock sleepers
• EN 13230-3:2009 ; Railway applications – Track – Concrete sleepers and bearers – Part 3: Twin-block reinforced sleepers
• EN 13230-4:2009 ; Railway applications – Track – Concrete sleepers and bearers – Part 4: Prestressed bearers for switches and crossings
• EN 13237:2003 ; Potentially explosive atmospheres – Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
• EN 13240:2001 ; Roomheaters fired by solid fuel – Requirements and test methods
• EN 13240:2001/A2:2004 ; EN 13240:2001/AC:2006
• EN 13240:2001/A2:2004/AC:2007 ; EN 13241-1:2003+A1:2011
• EN 13240:2001/AC:2006 ; EN 13240:2001/A2:2004/AC:2007
• EN 13241-1:2003+A1:2011 ; Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics
• EN 13242:2002+A1:2007 ; Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
• EN 13243:2004 ; Safety requirements for cableway installations designed to carry persons – Electrical equipment other than for drive systems
• EN 13245-2:2008 ; Plastics – Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications – Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
• EN 13245-2:2008/AC:2009 ; EN 13249:2000
• EN 13249:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
• EN 13249:2000/A1:2005 ; EN 13250:2000
• EN 13250:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in the construction of railways
• EN 13250:2000/A1:2005 ; EN 13251:2000
• EN 13251:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in earthworks, foundations and retaining structures
• EN 13251:2000/A1:2005 ; EN 13252:2000
• EN 13252:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in drainage systems
• EN 13252:2000/A1:2005 ; EN 13253:2000
• EN 13253:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in erosion control works (coastal protection, bank revetments)
• EN 13253:2000/A1:2005 ; EN 13254:2000
• EN 13254:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in the construction of reservoirs and dams
• EN 13254:2000/A1:2005 ; EN 13254:2000/AC:2003
• EN 13254:2000/AC:2003 ; EN 13255:2000
• EN 13255:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in the construction of canals
• EN 13255:2000/A1:2005 ; EN 13255:2000/AC:2003
• EN 13255:2000/AC:2003 ; EN 13256:2000
• EN 13256:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in the construction of tunnels and underground structures
• EN 13256:2000/A1:2005 ; EN 13256:2000/AC:2003
• EN 13256:2000/AC:2003 ; EN 13257:2000
• EN 13257:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in solid waste disposals
• EN 13257:2000/A1:2005 ; EN 13257:2000/AC:2003
• EN 13257:2000/AC:2003 ; EN 13263-1:2005+A1:2009
• EN 13260:2009+A1:2010 ; Railway applications – Wheelsets and bogies – Wheelsets – Product requirements
• EN 13261:2009+A1:2010 ; Railway applications – Wheelsets and bogies – Axles – Product requirements
• EN 13262:2004+A2:2011 ; Railway applications – Wheelsets and bogies – Wheels – Product requirements
• EN 13263-1:2005+A1:2009 ; Silica fume for concrete – Part 1: Definitions, requirements and conformity criteria
• EN 13265:2000 ; Geotextiles and geotextile-related products – Characteristics required for use in liquid waste containment projects
• EN 13265:2000/A1:2005 ; EN 13265:2000/AC:2003
• EN 13265:2000/AC:2003 ; EN 13279-1:2008
• EN 13274-1:2001 ; Respiratory protective devices – Methods of test – Part 1: Determination of inward leakage and total inward leakage
• EN 13274-2:2001 ; Respiratory protective devices – Methods of test – Part 2: Practical performance tests
• EN 13274-3:2001 ; Respiratory protective devices – Methods of test – Part 3: Determination of breathing resistance
• EN 13274-4:2001 ; Respiratory protective devices – Methods of test – Part 4: Flame tests
• EN 13274-5:2001 ; Respiratory protective devices – Methods of test – Part 5: Climatic conditions
• EN 13274-6:2001 ; Respiratory protective devices – Methods of test – Part 6: Determination of carbon dioxide content of the inhalation air
• EN 13274-7:2008 ; Respiratory protective devices – Methods of test – Part 7: Determination of particle filter penetration
• EN 13274-8:2002 ; Respiratory protective devices – Methods of test – Part 8: Determination of dolomite dust clogging
• EN 13277-1:2000 ; Protective equipment for martial arts – Part 1: General requirements and test methods
• EN 13277-2:2000 ; Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
• EN 13277-3:2000 ; Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors
• EN 13277-4:2001 ; Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors
• EN 13277-5:2002 ; Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
• EN 13277-6:2003 ; Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females
• EN 13277-7:2009 ; Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors
• EN 13278:2003 ; Open fronted gas-fired independent space heaters
• EN 13279-1:2008 ; Gypsum binders and gypsum plasters – Part 1: Definitions and requirements
• EN 13288:2005+A1:2009 ; Food processing machinery – Bowl lifting and tilting machines – Safety and hygiene requirements
• EN 133:2001 ; Respiratory protective devices – Classification
• EN 13309:2010 ; Construction machinery – Electromagnetic compatibility of machines with internal power supply
• EN 13310:2003 ; Kitchen sinks – Functional requirements and test methods
• EN 13319:2000 ; Diving accessories – Depth gauges and combined depth and time measuring devices – Functional and safety requirements, test methods
• EN 13341:2005+A1:2011 ; Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels – Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 – Requirements and test methods
• EN 13348:2008 ; Copper and copper alloys – Seamless, round copper tubes for medical gases or vacuum
• EN 13355:2004+A1:2009 ; Coating plants – Combined booths – Safety requirements
• EN 13356:2001 ; Visibility accessories for non-professional use – Test methods and requirements
• EN 13361:2004 ; Geosynthetic barriers – Characteristics required for use in the construction of reservoirs and dams
• EN 13361:2004/A1:2006 ; EN 13362:2005
• EN 13362:2005 ; Geosynthetic Barriers – Characteristics required for use in the construction of canals
• EN 13367:2005+A1:2008 ; Ceramic machines – Safety – Transfer platforms and cars
• EN 13367:2005+A1:2008/AC:2009 ; EN 13389:2005+A1:2009
• EN 13371:2001 ; Cryogenic vessels – Couplings for cryogenic service
• EN 1337-3:2005 ; Structural bearings – Part 3: Elastomeric bearings
• EN 1337-4:2004 ; Structural bearings – Part 4: Roller bearings
• EN 1337-4:2004/AC:2007 ; EN 1337-5:2005
• EN 1337-5:2005 ; Structural bearings – Part 5: Pot bearings
• EN 1337-6:2004 ; Structural bearings – Part 6: Rocker bearings
• EN 1337-7:2004 ; Structural bearings – Part 7: Spherical and cylindrical PTFE bearings
• EN 1337-8:2007 ; Structural bearings – Part 8: Guide Bearings and Restraint Bearings
• EN 1338:2003 ; Concrete paving blocks – Requirements and test methods
• EN 1338:2003/AC:2006 ; EN 1339:2003
• EN 13383-1:2002 ; Armourstone – Part 1: Specification
• EN 13383-1:2002/AC:2004 ; EN 13407:2006
• EN 13389:2005+A1:2009 ; Food processing machinery – Mixers with horizontal shafts – Safety and hygiene requirements
• EN 1339:2003 ; Concrete paving flags – Requirements and test methods
• EN 1339:2003/AC:2006 ; EN 1340:2003
• EN 13390:2002+A1:2009 ; Food processing machinery – Pie and tart machines – Safety and hygiene requirements
• EN 13397:2001 ; Industrial valves – Diaphragm valves made of metallic materials
• EN 134:1998 ; Respiratory protective devices – Nomenclature of components
• EN 1340:2003 ; Concrete kerb units – Requirements and test methods
• EN 1340:2003/AC:2006 ; EN 1341:2001
• EN 13407:2006 ; Wall-hung urinals – Functional requirements and test methods
• EN 1341:2001 ; Slabs of natural stone for external paving – Requirements and test methods
• EN 13411-1:2002+A1:2008 ; Terminations for steel wire ropes – Safety – Part 1: Thimbles for steel wire rope slings
• EN 13411-2:2001+A1:2008 ; Terminations for steel wire ropes – Safety – Part 2: Splicing of eyes for wire rope slings
• EN 13411-3:2004+A1:2008 ; Terminations for steel wire ropes – Safety – Part 3: Ferrules and ferrule-securing
• EN 13411-4:2011 ; Terminations for steel wire ropes – Safety – Part 4: Metal and resin socketing
• EN 13411-5:2003+A1:2008 ; Terminations for steel wire ropes – Safety – Part 5: U-bolt wire rope grips
• EN 13411-6:2004+A1:2008 ; Terminations for steel wire ropes – Safety – Part 6: Asymmetric wedge socket
• EN 13411-7:2006+A1:2008 ; Terminations for steel wire ropes – Safety – Part 7: Symmetric wedge socket
• EN 13411-8:2011 ; Terminations for steel wire ropes – Safety – Part 8: Swage terminals and swaging
• EN 13414-1:2003+A2:2008 ; Steel wire rope slings – Safety – Part 1: Slings for general lifting service
• EN 13414-2:2003+A2:2008 ; Steel wire rope slings – Safety – Part 2: Specification for information for use and maintenance to be provided by the manufacturer
• EN 13414-3:2003+A1:2008 ; Steel wire rope slings – Safety – Part 3: Grommets and cable-laid slings
• EN 13418:2004+A1:2008 ; Plastics and rubber machines – Winding machines for film or sheet – Safety requirements
• EN 1342:2001 ; Setts of natural stone for external paving – Requirements and test methods
• EN 13427:2004 ; Packaging – Requirements for the use of European Standards in the field of packaging and packaging waste
• EN 13428:2004 ; Packaging – Requirements specific to manufacturing and composition – Prevention by source reduction
• EN 13429:2004 ; Packaging – Reuse
• EN 1343:2001 ; Kerbs of natural stone for external paving – Requirements and test methods
• EN 13430:2004 ; Packaging – Requirements for packaging recoverable by material recycling
• EN 13431:2004 ; Packaging – Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
• EN 13432:2000 ; Packaging – Requirements for packaging recoverable through composting and biodegradation – Test scheme and evaluation criteria for the final acceptance of packaging
• EN 1344:2002 ; Clay pavers – Requirements and test methods
• EN 13445-1:2009 ; Unfired pressure vessels – Part 1: General
• EN 13445-2:2009 ; Unfired pressure vessels – Part 2: Materials
• EN 13445-2:2009/A1:2012 (new) ; EN 13445-2:2009/A2:2012 (new)
• EN 13445-2:2009/A2:2012 (new) ; EN 13445-3:2009
• EN 13445-3:2009 ; Unfired pressure vessels – Part 3: Design
• EN 13445-3:2009/A1:2012 (new) ; EN 13445-4:2009
• EN 13445-4:2009 ; Unfired pressure vessels – Part 4: Fabrication
• EN 13445-5:2009 ; Unfired pressure vessels – Part 5: Inspection and testing
• EN 13445-6:2009 ; Unfired pressure vessels – Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
• EN 13445-8:2009 ; Unfired pressure vessels – Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
• EN 13448:2001+A1:2009 ; Agricultural and forestry machinery – Inter-row mowing units – Safety
• EN 13450:2002 ; Aggregates for railway ballast
• EN 13450:2002/AC:2004 ; EN 13454-1:2004
• EN 13454-1:2004 ; Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate – Part 1: Definitions and requirements
• EN 13457:2004+A1:2010 ; Footwear, leather and imitation leather goods manufacturing machines – Splitting, skiving, cutting, cementing and cement drying machines – Safety requirements
• EN 13458-1:2002 ; Cryogenic vessels – Static vacuum insulated vessels – Part 1: Fundamental requirements
• EN 13458-2:2002 ; Cryogenic vessels – Static vacuum insulated vessels – Part 2: Design, fabrication, inspection and testing
• EN 13458-2:2002/AC:2006 ; EN 13458-3:2003
• EN 13458-3:2003 ; Cryogenic vessels – Static vacuum insulated vessels – Part 3: Operational requirements
• EN 13463-1:2009 ; Non-electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method and requirements
• EN 13463-2:2004 ; Non-electrical equipment for use in potentially explosive atmospheres – Part 2: Protection by flow restricting enclosure ‘fr’
• EN 13463-3:2005 ; Non-electrical equipment for use in potentially explosive atmospheres – Part 3: Protection by flameproof enclosure ‘d’
• EN 13463-5:2011 ; Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection by constructional safety ‘c’
• EN 13463-6:2005 ; Non-electrical equipment for use in potentially explosive atmospheres – Part 6: Protection by control of ignition source ‘b’
• EN 13463-8:2003 ; Non-electrical equipment for potentially explosive atmospheres – Part 8: Protection by liquid immersion ‘k’
• EN 13478:2001+A1:2008 ; Safety of machinery – Fire prevention and protection
• EN 13479:2004 ; Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials
• EN 13480-1:2012 (new) ; Metallic industrial piping – Part 1: General
• EN 13480-2:2012 (new) ; Metallic industrial piping – Part 2: Materials
• EN 13480-3:2012 (new) ; Metallic industrial piping – Part 3: Design and calculation
• EN 13480-4:2012 (new) ; Metallic industrial piping – Part 4: Fabrication and installation
• EN 13480-5:2012 (new) ; Metallic industrial piping – Part 5: Inspection and testing
• EN 13480-6:2012 (new) ; Metallic industrial piping – Part 6: Additional requirements for buried piping
• EN 13480-8:2012 (new) ; Metallic industrial piping – Part 8: Additional requirements for aluminium and aluminium alloy piping
• EN 13484:2012 (new) ; Helmets for users of luges
• EN 1349:2009 ; Industrial process control valves
• EN 13490:2001+A1:2008 ; Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration
• EN 13491:2004 ; Geosynthetic barriers – Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
• EN 13491:2004/A1:2006 ; EN 13492:2004
• EN 13492:2004 ; Geosynthetic barriers – Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
• EN 13492:2004/A1:2006 ; EN 13493:2005
• EN 13493:2005 ; Geosynthetic barriers – Characteristics required for use in the construction of solid waste storage and disposal sites
• EN 135:1998 ; Respiratory protective devices – List of equivalent terms
• EN 13502:2002 ; Chimneys – Requirements and test methods for clay/ceramic flue terminals
• EN 13524:2003+A1:2009 ; Highway maintenance machines – Safety requirements
• EN 13525:2005+A2:2009 ; Forestry machinery – Wood chippers – Safety
• EN 13531:2001+A1:2008 ; Earth-moving machinery – Tip-over protection structure (TOPS) for compact excavators – Laboratory tests and performance requirements (ISO 12117:1997 modified)
• EN 13532:2002 ; General requirements for in vitro diagnostic medical devices for self-testing
• EN 13534:2006+A1:2010 ; Food processing machinery – Curing injection machines – Safety and hygiene requirements
• EN 13544-1:2007+A1:2009 ; Respiratory therapy equipment – Part 1: Nebulizing systems and their components
• EN 13544-2:2002+A1:2009 ; Respiratory therapy equipment – Part 2: Tubing and connectors
• EN 13544-3:2001+A1:2009 ; Respiratory therapy equipment – Part 3: Air entrainment devices
• EN 13546:2002+A1:2007 ; Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods
• EN 13557:2003+A2:2008 ; Cranes – Controls and control stations
• EN 13561:2004+A1:2008 ; External blinds – Performance requirements including safety
• EN 13564-1:2002 ; Anti-flooding devices for buildings – Part 1: Requirements
• EN 13567:2002+A1:2007 ; Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods
• EN 13570:2005+A1:2010 ; Food processing machinery – Mixing machines – Safety and hygiene requirements
• EN 13586:2004+A1:2008 ; Cranes – Access
• EN 1359:1998 ; Gas meters – Diaphragm gas meters
• EN 1359:1998/A1:2006 ; EN 1434-1:2007
• EN 13591:2005+A1:2009 ; Food processing machinery – Fixed deck oven loaders – Safety and hygiene requirements
• EN 13594:2002 ; Protective gloves for professional motorcycle riders – Requirements and test methods
• EN 13595-1:2002 ; Protective clothing for professional motorcycle riders – Jackets, trousers and one piece or divided suits – Part 1: General requirements
• EN 13595-2:2002 ; Protective clothing for professional motorcycle riders – Jackets, trousers and one-piece or divided suits – Part 2: Test method for determination of impact abrasion resistance
• EN 13595-3:2002 ; Protective clothing for professional motorcycle riders – Jackets, trousers and one-piece or divided suits – Part 3: Test method for determination of burst strength
• EN 13595-4:2002 ; Protective clothing for professional motorcycle riders – Jackets, trousers and one-piece or divided suits – Part 4: Test method for determination of impact cut resistance
• EN 136:1998 ; Respiratory protective devices – Full face masks – Requirements, testing, marking
• EN 136:1998/AC:2003 ; EN 137:2006
• EN 13611:2007 ; Safety and control devices for gas burners and gas burning appliances – General requirements
• EN 13611:2007+A2:2011 ; Safety and control devices for gas burners and gas burning appliances – General requirements
• EN 13612:2002 ; Performance evaluation of in vitro diagnostic medical devices
• EN 13612:2002/AC:2002 ; EN 13640:2002
• EN 13616:2004 ; Overfill prevention devices for static tanks for liquid petroleum fuels
• EN 13616:2004/AC:2006 ; EN 13617-1:2012
• EN 13616:2004/AC:2006 ; EN 13658-1:2005
• EN 13617-1:2012 ; Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
• EN 13617-2:2012 ; Petrol filling stations – Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
• EN 13617-3:2012 ; Petrol filling stations – Part 3: Safety requirements for construction and performance of shear valves
• EN 13619:2002 ; Postal services – Mail item processing – Optical characteristics for processing letters
• EN 13621:2004+A1:2010 ; Food processing machinery – Salad dryers – Safety and hygiene requirements
• EN 13624:2003 ; Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area – Test method and requirements (phase 2, step 1)
• EN 13630-1:2003 ; Explosives for civil uses – Detonating cords and safety fuses – Part 1: Requirements
• EN 13630-10:2005 ; Explosives for civil uses – Detonating cords and safety fuses – Part 10: Determination of initiating capability of detonating cords
• EN 13630-11:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 11: Determination of velocity of detonation of detonating cords
• EN 13630-12:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 12: Determination of burning duration of safety fuses
• EN 13630-2:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 2: Determination of thermal stability of detonating cords and safety fuses
• EN 13630-3:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 3: Determination of sensitiveness to friction of the core of detonating cords
• EN 13630-4:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 4: Determination of sensitiveness to impact of detonating cords
• EN 13630-5:2003 ; Explosives for civil uses – Detonating cords and safety fuses – Part 5: Determination of resistance to abrasion of detonating cords
• EN 13630-6:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 6: Determination of resistance to tension of detonating cords
• EN 13630-7:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 7: Determination of reliability of initiation of detonating cords
• EN 13630-8:2002 ; Explosives for civil uses – Detonating cords and safety fuses – Part 8: Determination of resistance to water of detonating cords and safety fuses
• EN 13630-9:2004 ; Explosives for civil uses – Detonating cords and safety fuses – Part 9: Determination of transmission of detonation from detonating cord to detonating cord
• EN 13631-1:2005 ; Explosives for civil uses – High explosives – Part 1: Requirements
• EN 13631-10:2003 ; Explosives for civil uses – High explosives – Part 10: Method for the verification of the means of initiation
• EN 13631-11:2003 ; Explosives for civil uses – High explosives – Part 11: Determination of transmission of detonation
• EN 13631-12:2004 ; Explosives for civil uses – High explosives – Part 12: Specifications of boosters with different initiating capability
• EN 13631-13:2003 ; Explosives for civil uses – High explosives – Part 13: Determination of density
• EN 13631-14:2003 ; Explosives for civil uses – High explosives – Part 14: Determination of velocity of detonation
• EN 13631-15:2005 ; Explosives for civil uses – High explosives – Part 15: Calculation of thermodynamic properties
• EN 13631-16:2004 ; Explosives for civil uses – High explosives – Part 16: Detection and measurement of toxic gases
• EN 13631-2:2002 ; Explosives for civil uses – High explosives – Part 2: Determination of thermal stability of explosives
• EN 13631-3:2004 ; Explosives for civil uses – High explosives – Part 3: Determination of sensitiveness to friction of explosives
• EN 13631-4:2002 ; Explosives for civil uses – High explosives – Part 4: Determination of sensitiveness to impact of explosives
• EN 13631-5:2002 ; Explosives for civil uses – High explosives – Part 5: Determination of resistance to water
• EN 13631-6:2002 ; Explosives for civil uses – High explosives – Part 6: Determination of resistance to hydrostatic pressure
• EN 13631-7:2003 ; Explosives for civil uses – High explosives – Part 7: Determination of safety and reliability at extreme temperatures
• EN 13634:2010 ; Protective footwear for motorcycle riders – Requirements and test methods
• EN 13640:2002 ; Stability testing of in vitro diagnostic reagents
• EN 13641:2002 ; Elimination or reduction of risk of infection related to in vitro diagnostic reagents
• EN 13648-1:2008 ; Cryogenic vessels – Safety devices for protection against excessive pressure – Part 1: Safety valves for cryogenic service
• EN 13648-2:2002 ; Cryogenic vessels – Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices for cryogenic service
• EN 13648-3:2002 ; Cryogenic vessels – Safety devices for protection against excessive pressure – Part 3: Determination of required discharge – Capacity and sizing
• EN 13658-1:2005 ; Metal lath and beads – Definitions, requirements and test methods – Part 1: Internal plastering
• EN 13658-2:2005 ; Metal lath and beads – Definitions, requirements and test methods – Part 2: External rendering
• EN 13659:2004+A1:2008 ; Shutters – Performance requirements including safety
• EN 13674-1:2011 ; Railway applications – Track – Rail – Part 1: Vignole railway rails 46 kg/m and above
• EN 13674-2:2006+A1:2010 ; Railway applications – Track – Rail – Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
• EN 13674-3:2006+A1:2010 ; Railway applications – Track – Rail – Part 3: Check rails
• EN 13675:2004+A1:2010 ; Safety of machinery – Safety requirements for tube forming and rolling mills and their finishing line equipment
• EN 13683:2003+A2:2011 ; Garden equipment – Integrally powered shredders/chippers – Safety
• EN 13684:2004+A3:2009 ; Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety
• EN 13693:2004+A1:2009 ; Precast concrete products – Special roof elements
• EN 137:2006 ; Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking
• EN 13707:2004+A2:2009 ; Flexible sheets for waterproofing – Reinforced bitumen sheets for roof waterproofing – Definitions and characteristics
• EN 13709:2010 ; Industrial valves – Steel globe and globe stop and check valves
• EN 13715:2006+A1:2010 ; Railway applications – Wheelsets and bogies – Wheels – Tread profile
• EN 13718-1:2008 ; Medical vehicles and their equipment – Air ambulances – Part 1: Requirements for medical devices used in air ambulances
• EN 13724:2002 ; Postal services – Apertures of private letter boxes and letter plates – Requirements and test methods
• EN 13726-1:2002 ; Test methods for primary wound dressings – Part 1: Aspects of absorbency
• EN 13726-1:2002/AC:2003 ; EN 13726-2:2002
• EN 13726-2:2002 ; Test methods for primary wound dressings – Part 2: Moisture vapour transmission rate of permeable film dressings
• EN 13727:2012 ; Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of bactericidal activity in the medical area – Test method and requirements (phase 2, step 1)
• EN 13731:2007 ; Lifting bag systems for fire and rescue service use – Safety and performance requirements
• EN 13732:2002+A2:2009 ; Food processing machinery – Bulk Milk Coolers on Farms – Requirements for construction, performance, suitability for use, safety and hygiene
• EN 13736:2003+A1:2009 ; Safety of machine tools – Pneumatic presses
• EN 1374:2000+A1:2010 ; Agricultural machinery – Silos stationary unloaders for round silos – Safety
• EN 13747:2005+A2:2010 ; Precast concrete products – Floor plates for floor systems
• EN 13748-1:2004 ; Terrazzo tiles – Part 1: Terrazzo tiles for internal use
• EN 13748-1:2004/A1:2005 ; EN 13748-1:2004/AC:2005
• EN 13748-1:2004/AC:2005 ; EN 13748-2:2004
• EN 13748-2:2004 ; Terrazzo tiles – Part 2: Terrazzo tiles for external use
• EN 13749:2011 ; Railway applications – Wheelsets and bogies – Method of specifying the structural requirements of bogie frames
• EN 13760:2003 ; Automotive LPG filling system for light and heavy duty vehicles – Nozzle, test requirements and dimensions
• EN 13763-1:2004 ; Explosives for civil uses – Detonators and relays – Part 1: Requirements
• EN 13763-11:2003 ; Explosives for civil uses – Detonators and relays – Part 11: Determination of resistance to damage by dropping of detonators and relays
• EN 13763-12:2003 ; Explosives for civil uses – Detonators and relays – Part 12:Determination of resistance to hydrostatic pressure
• EN 13763-13:2004 ; Explosives for civil uses – Detonators and relays – Part 13: Determination of resistance of electric detonators to electrostatic discharge
• EN 13763-15:2004 ; Explosives for civil uses – Detonators and relays – Part 15: Determination of equivalent initiating capability
• EN 13763-16:2003 ; Explosives for civil uses – Detonators and relays – Part 16: Determination of delay accuracy
• EN 13763-17:2003 ; Explosives for civil uses – Detonators and relays – Part 17: Determination of no-fire current of electric detonators
• EN 13763-18:2003 ; Explosives for civil uses – Detonators and relays – Part 18: Determination of series firing current of electric detonators
• EN 13763-19:2003 ; Explosives for civil uses – Detonators and relays – Part 19: Determination of firing impulse of electric detonators
• EN 13763-2:2002 ; Explosives for civil uses – Detonators and relays – Part 2: Determination of thermal stability
• EN 13763-20:2003 ; Explosives for civil uses – Detonators and relays – Part 20: Determination of total electrical resistance of electric detonators
• EN 13763-21:2003 ; Explosives for civil uses – Detonators and relays – Part 21: Determination of flash-over voltage of electric detonators
• EN 13763-22:2003 ; Explosives for civil uses – Detonators and relays – Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leading wires
• EN 13763-23:2002 ; Explosives for civil uses – Detonators and relays – Part 23: Determination of the shock-wave velocity of shock tube
• EN 13763-24:2002 ; Explosives for civil uses – Detonators and relays – Part 24: Determination of the electrical non-conductivity of shock tube
• EN 13763-25:2004 ; Explosives for civil uses – Detonators and relays – Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories
• EN 13763-3:2002 ; Explosives for civil uses – Detonators and relays – Part 3: Determination of sensitiveness to impact
• EN 13763-4:2003 ; Explosives for civil uses – Detonators and relays – Part 4: Determination of resistance to abrasion of leading wires and shock tubes
• EN 13763-5:2003 ; Explosives for civil uses – Detonators and relays – Part 5: Determination of resistance to cutting damage of leading wires and shock tubes
• EN 13763-6:2003 ; Explosives for civil uses – Detonators and relays – Part 6: Determination of resistance to cracking in low temperatures of leading wires
• EN 13763-7:2003 ; Explosives for civil uses – Detonators and relays – Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
• EN 13763-8:2003 ; Explosives for civil uses – Detonators and relays – Part 8: Determination of the resistance to vibration of plain detonators
• EN 13763-9:2003 ; Explosives for civil uses – Detonators and relays – Part 9: Determination of resistance to bending of detonators
• EN 13781:2012 (new) ; Protective helmets for drivers and passengers of snowmobiles and bobsleighs
• EN 13785:2005+A1:2008 ; Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
• EN 13786:2004+A1:2008 ; Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
• EN 13789:2010 ; Industrial valves – Cast iron globe valves
• EN 13794:2002 ; Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking
• EN 13796-1:2005 ; Safety requirements for cableway installations designed to carry persons – Carriers – Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
• EN 13796-2:2005 ; Safety requirements for cableway installations designed to carry persons – Carriers – Part 2: Slipping resistance test for grips
• EN 13796-3:2005 ; Safety requirements for cableway installations designed to carry persons – Carriers – Part 3: Fatigue tests
• EN 138:1994 ; Respiratory protective devices – Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly – Requirements, testing, marking
• EN 13803-1:2010 ; Railway applications – Track – Track alignment design parameters – Track gauges 1435 mm and wider – Part 1: Plain line
• EN 13803-2:2006+A1:2009 ; Railway applications – Track – Track alignment design parameters – Track gauges 1 435 mm and wider – Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature
• EN 13808:2005 ; Bitumen and bituminous binders – Framework for specifying cationic bituminous emulsions
• EN 13813:2002 ; Screed material and floor screeds – Screed material – Properties and requirements
• EN 13815:2006 ; Fibrous gypsum plaster casts – Definitions, requirements and test methods
• EN 13819-1:2002 ; Hearing protectors – Testing – Part 1: Physical test methods
• EN 13819-2:2002 ; Hearing protectors – Testing – Part 2: Acoustic test methods
• EN 13821:2002 ; Potentially explosive atmospheres – Explosion prevention and protection – Determination of minimum ignition energy of dust/air mixtures
• EN 13830:2003 ; Curtain walling – Product standard
• EN 13831:2007 ; Closed expansion vessels with built in diaphragm for installation in water
• EN 13832-1:2006 ; Footwear protecting against chemicals – Part 1: Terminology and test methods
• EN 13832-2:2006 ; Footwear protecting against chemicals – Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
• EN 13832-3:2006 ; Footwear protecting against chemicals – Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
• EN 13835:2012 (new) ; Founding – Austenitic cast irons
• EN 13836:2006 ; Gas fired central heating boilers – Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW
• EN 1384:2012 (new) ; Helmets for equestrian activities
• EN 13848-5:2008+A1:2010 ; Railway applications – Track – Track geometry quality – Part 5: Geometric quality levels – Plain line
• EN 1385:2012 (new) ; Helmets for canoeing and white water sports
• EN 13850:2002 ; Postal services – Quality of service – Measurement of the transit time of end-to-end services for single piece priority mail and first class mail
• EN 13857-1:2003 ; Explosives for civil uses – Part 1: Terminology
• EN 13857-3:2002 ; Explosives for civil uses – Part 3: Information to be provided by the manufacturer or his authorised representative to the user
• EN 13859-1:2010 ; Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 1: Underlays for discontinuous roofing
• EN 13859-2:2010 ; Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 2: Underlays for walls
• EN 13862:2001+A1:2009 ; Floor cutting-off machines – Safety
• EN 13867:2002+A1:2009 ; Concentrates for haemodialysis and related therapies
• EN 13870:2005+A1:2010 ; Food processing machinery – Chop cutting machines – Safety and hygiene requirements
• EN 13871:2005+A1:2010 ; Food processing machinery – Cubes cutting machinery – Safety and hygiene requirements
• EN 13877-3:2004 ; Concrete pavements – Part 3: Specifications for dowels to be used in concrete pavements
• EN 13885:2005+A1:2010 ; Food processing machinery – Clipping machines – Safety and hygiene requirements
• EN 13886:2005+A1:2010 ; Food processing machinery – Cooking kettles equipped with powered stirrer and/or mixer – Safety and hygiene requirements
• EN 13889:2003+A1:2008 ; Forged steel shackles for general lifting purposes – Dee shackles and bow shackles – Grade 6 – Safety
• EN 13898:2003+A1:2009 ; Machine tools – Safety – Sawing machines for cold metal
• EN 13898:2003+A1:2009/AC:2010 ; EN 13951:2012
• EN 13899:2003 ; Roller sports equipment – Roller skates – Safety requirements and test methods
• EN 13911:2004 ; Protective clothing for firefighters – Requirements and test methods for fire hoods for firefighters
• EN 13915:2007 ; Prefabricated gypsum plasterboard panels with a cellular paperboard core – Definitions, requirements and test methods
• EN 13921:2007 ; Personal protective equipment – Ergonomic principles
• EN 13923:2005 ; Filament-wound FRP pressure vessels – Materials, design, manufacturing and testing
• EN 13924:2006 ; Bitumen and bituminous binders – Specifications for hard paving grade bitumens
• EN 13924:2006/AC:2006 ; EN 13950:2005
• EN 13938-1:2004 ; Explosives for civil uses – Propellants and rocket propellants – Part 1: Requirements
• EN 13938-1:2004/AC:2006 ; EN 13938-2:2004
• EN 13938-2:2004 ; Explosives for civil uses – Propellants and rocket propellants – Part 2: Determination of resistance to electrostatic energy
• EN 13938-3:2003 ; Explosives for civil uses – Propellants and rocket propellants – Part 3: Determination of deflagration to detonation transition
• EN 13938-4:2003 ; Explosives for civil uses – Propellants and rocket propellants – Part 4: Determination of burning rate under ambient conditions
• EN 13938-5:2004 ; Explosives for civil uses – Propellants and rocket propellants – Part 5: Determination of voids and fissures
• EN 13938-7:2004 ; Explosives for civil uses – Propellants and rocket propellants – Part 7: Determination of properties of black powder
• EN 13949:2003 ; Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking
• EN 13950:2005 ; Gypsum plasterboard thermal/acoustic insulation composite panels – Definitions, requirements and test methods
• EN 13951:2012 ; Liquid pumps – Safety requirements – Agrifoodstuffs equipment; Design rules to ensure hygiene in use
• EN 13954:2005+A1:2010 ; Food processing machinery – Bread slicers – Safety and hygiene requirements
• EN 13956:2005 ; Flexible sheet for waterproofing – Plastic and rubber sheets for roof waterproofing – Definitions and characteristics
• EN 13956:2005/AC:2006 ; EN 13963:2005
• EN 13963:2005 ; Jointing materials for gypsum plasterboards – Definitions, requirements and test methods
• EN 13963:2005/AC:2006 ; EN 13964:2004
• EN 13964:2004 ; Suspended ceilings – Requirements and test methods
• EN 13964:2004/A1:2006 ; EN 13967:2004
• EN 13967:2004 ; Flexible sheets for waterproofing – Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet – Definitions and characteristics
• EN 13967:2004/A1:2006 ; EN 13969:2004
• EN 13969:2004 ; Flexible sheets for waterproofing – Bitumen damp proof sheets including bitumen basement tanking sheets – Definitions and characteristics
• EN 13969:2004/A1:2006 ; EN 13970:2004
• EN 13970:2004 ; Flexible sheets for waterproofing – Bitumen water vapour control layers – Definitions and characteristics
• EN 13970:2004/A1:2006 ; EN 13978-1:2005
• EN 13975:2003 ; Sampling procedures used for acceptance testing of in vitro diagnostic medical devices – Statistical aspects
• EN 13976-1:2011 ; Rescue systems – Transportation of incubators – Part 1: Interface conditions
• EN 13976-2:2011 ; Rescue systems – Transportation of incubators – Part 2: System requirements
• EN 13977:2011 ; Railway applications – Track – Safety requirements for portable machines and trolleys for construction and maintenance
• EN 13978-1:2005 ; Precast concrete products – Precast concrete garages – Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
• EN 13979-1:2003+A2:2011 ; Railway applications – Wheelsets and bogies – Monobloc wheels – Technical approval procedure – Part 1: Forged and rolled wheels
• EN 1398:2009 ; Dock levellers – Safety requirements
• EN 13984:2004 ; Flexible sheets for waterproofing – Plastic and rubber vapour control layers – Definitions and characteristics
• EN 13984:2004/A1:2006 ; EN 13986:2004
• EN 13985:2003+A1:2009 ; Machine tools – Safety – Guillotine shears
• EN 13986:2004 ; Wood-based panels for use in construction – Characteristics, evaluation of conformity and marking
• EN 140:1998 ; Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking
• EN 140:1998/AC:1999 ; EN 142:2002
• EN 1400-1:2002 ; Child use and care articles – Soothers for babies and young children – Part 1: General safety requirements and product information
• EN 1400-2:2002 ; Child use and care articles – Soothers for babies and young children – Part 2 : Mechanical requirements and tests
• EN 1400-3:2002 ; Child use and care articles – Soothers for babies and young children – Part 3 : Chemical requirements and tests

-|1|- |2||3||4|