You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » STD-EN related CE Marking Conti 2

STD-EN related CE Marking Conti 2

|1| -|2|- |3||4|

  • EN 14010:2003+A1:2009 ; Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages

  • EN 14012:2003 ; Postal services – Quality of service – Measurement of complaints and redress procedures

  • EN 14016-1:2004 ; Binders for magnesite screeds – Caustic magnesia and magnesium chloride – Part 1: Definitions, requirements

  • EN 14017:2005+A2:2009 ; Agricultural and forestry machinery – Solid fertilizer distributors – Safety

  • EN 14018:2005+A1:2009 ; Agricultural and forestry machinery – Seed drills – Safety

  • EN 14021:2003 ; Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods

  • EN 14023:2010 ; Bitumen and bituminous binders – Specification framework for polymer modified bitumens

  • EN 14033-1:2011 ; Railway applications – Track – Railbound construction and maintenance machines – Part 1: Technical requirements for running

  • EN 14033-3:2009+A1:2011 ; Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements

  • EN 14034-1:2004+A1:2011 ; Determination of explosion characteristics of dust clouds – Part 1: Determination of the maximum explosion pressure pmax of dust clouds

  • EN 14034-2:2006+A1:2011 ; Determination of explosion characteristics of dust clouds – Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds

  • EN 14034-3:2006+A1:2011 ; Determination of explosion characteristics of dust clouds – Part 3: Determination of the lower explosion limit LEL of dust clouds

  • EN 14034-4:2004+A1:2011 ; Determination of explosion characteristics of dust clouds – Part 4: Determination of the limiting oxygen concentration LOC of dust clouds

  • EN 14037-1:2003 ; Ceiling mounted radiant panels supplied with water at temperature below 120 °C – Part 1: Technical specifications and requirements

  • EN 14041:2004 ; Resilient, textile and laminate floor coverings – Essential characteristics

  • EN 14041:2004/AC:2006 ; EN 14055:2010

  • EN 14043:2005+A1:2009 ; High rise aerial appliances for fire service use – Turntable ladders with combined movements – Safety and performance requirements and test methods

  • EN 14044:2005+A1:2009 ; High rise aerial appliances for fire service use – Turntable ladders with sequential movements – Safety and performance requirements and test methods

  • EN 14052:2012+A1:2012 (new) ; High performance industrial helmets

  • EN 14055:2010 ; WC and urinal flushing cisterns

  • EN 14058:2004 ; Protective clothing – Garments for protection against cool environments

  • EN 14059:2002 ; Decorative oil lamps – Safety requirements and test methods

  • EN 14063-1:2004 ; Thermal insulation products for buildings – In-situ formed expanded clay lightweight aggregate products – Part 1: Specification for the loose-fill products before installation

  • EN 14063-1:2004/AC:2006 ; EN 14064-1:2010

  • EN 14064-1:2010 ; Thermal insulation products for buildings – In-situ formed loose-fill mineral wool (MW) products – Part 1: Specification for the loose-fill products before installation

  • EN 14067-4:2005+A1:2009 ; Railway applications – Aerodynamics – Part 4: Requirements and test procedures for aerodynamics on open track

  • EN 14067-5:2006+A1:2010 ; Railway applications – Aerodynamics – Part 5: Requirements and test procedures for aerodynamics in tunnels

  • EN 14067-6:2010 ; Railway applications – Aerodynamics – Part 6: Requirements and test procedures for cross wind assessment

  • EN 14070:2003+A1:2009 ; Safety of machine tools – Transfer and special-purpose machines

  • EN 14070:2003+A1:2009/AC:2010 ; EN ISO 14122-1:2001

  • EN 14071:2004 ; Pressure relief valves for LPG tanks – Ancillary equipment

  • EN 14079:2003 ; Non-active medical devices – Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze

  • EN 14080:2005 ; Timber structures – Glued laminated timber – Requirements

  • EN 14081-1:2005+A1:2011 ; Timber structures – Strength graded structural timber with rectangular cross section – Part 1: General requirements

  • EN 14120:2003+A1:2007 ; Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods

  • EN 14126:2003 ; Protective clothing – Performance requirements and tests methods for protective clothing against infective agents

  • EN 14126:2003/AC:2004 ; EN 14143:2003

  • EN 14129:2004 ; Pressure relief valves for LPG tanks

  • EN 14136:2004 ; Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures

  • EN 14137:2003 ; Postal services – Quality of service – Measurement of loss of registered mail and other types of postal service using a track and trace system

  • EN 14139:2010 ; Ophthalmic optics – Specifications for ready-to-wear spectacles

  • EN 14142-1:2003 ; Postal services – Address databases – Part 1: Components of postal addresses

  • EN 14143:2003 ; Respiratory equipment – Self-contained re-breathing diving apparatus

  • EN 14154-1:2005+A2:2011 ; Water meters – Part 1: General requirements

  • EN 14154-2:2005+A2:2011 ; Water meters – Part 2: Installation and conditions of use

  • EN 14154-3:2005+A2:2011 ; Water meters – Part 3: Test methods and equipment

  • EN 1417:1996+A1:2008 ; Plastics and rubber machines – Two roll mills – Safety requirements

  • EN 1417:1996+A1:2008/AC:2009 ; EN 1459:1998+A3:2012

  • EN 14178-2:2004 ; Glass in building – Basic alkaline earth silicate glass products – Part 2: Evaluation of conformity/Product standard

  • EN 14179-2:2005 ; Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard

  • EN 14180:2003+A2:2009 ; Sterilizers for medical purposes – Low temperature steam and formaldehyde sterilizers – Requirements and testing

  • EN 14188-1:2004 ; Joint fillers and sealants – Part 1: Specifications for hot applied sealants

  • EN 14188-2:2004 ; Joint fillers and sealants – Part 2: Specifications for cold applied sealants

  • EN 14188-3:2006 ; Joint fillers and sealants – Part 3: Specifications for preformed joint seals

  • EN 14190:2005 ; Gypsum plasterboard products from reprocessing – Definitions, requirements and test methods

  • EN 14195:2005 ; Metal framing components for gypsum plasterboard systems – Definitions, requirements and test methods

  • EN 14195:2005/AC:2006 ; EN 14209:2005

  • EN 14197-1:2003 ; Cryogenic vessels – Static non-vacuum insulated vessels – Part 1: Fundamental requirements

  • EN 14197-2:2003 ; Cryogenic vessels – Static non-vacuum insulated vessels – Part 2: Design, fabrication, inspection and testing

  • EN 14197-2:2003/AC:2006 ; EN 14197-3:2004

  • EN 14197-3:2004 ; Cryogenic vessels – Static non-vacuum insulated vessels – Part 3: Operational requirements

  • EN 14197-3:2004/AC:2004 ; EN 14222:2003

  • EN 142:2002 ; Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking

  • EN 14209:2005 ; Preformed plasterboard cornices – Definitions, requirements and test methods

  • EN 14216:2004 ; Cement – Composition, specifications and conformity criteria for very low heat special cements

  • EN 1422:1997+A1:2009 ; Sterilizers for medical purposes – Ethylene oxide sterilizers – Requirements and test methods

  • EN 14222:2003 ; Stainless steel shell boilers

  • EN 14225-1:2005 ; Diving suits – Part 1: Wet suits – Requirements and test methods

  • EN 14225-2:2005 ; Diving suits – Part 2: Dry suits – Requirements and test methods

  • EN 14225-3:2005 ; Diving suits – Part 3: Actively heated or cooled suits (systems) – Requirements and test methods

  • EN 14225-4:2005 ; Diving suits – Part 4: One atmosphere suits (ADS) – Human factors requirements and test methods

  • EN 14229:2010 ; Structural timber – Wood poles for overhead lines

  • EN 1423:2012 (new) ; Road marking materials – Drop on materials – Glass beads, antiskid aggregates and mixtures of the two

  • EN 14236:2007 ; Ultrasonic domestic gas meters

  • EN 14238:2004+A1:2009 ; Cranes – Manually controlled load manipulating devices

  • EN 14246:2006 ; Gypsum elements for suspended ceilings – Definitions, requirements and test methods

  • EN 14246:2006/AC:2007 ; EN 14250:2010

  • EN 14250:2010 ; Timber structures – Product requirements for prefabricated structural members assembled with punched metal plate fasteners

  • EN 14254:2004 ; In vitro diagnostic medical devices – Single-use receptacles for the collection of specimens, other than blood, from humans

  • EN 14276-1:2006+A1:2011 ; Pressure equipment for refrigerating systems and heat pumps – Part 1: Vessels – General requirements

  • EN 14276-2:2007+A1:2011 ; Pressure equipment for refrigerating systems and heat pumps – Part 2: Piping – General requirements

  • EN 14296:2005 ; Sanitary appliances – Communal washing troughs

  • EN 143:2000 ; Respiratory protective devices – Particle filters – Requirements, testing, marking

  • EN 143:2000/AC:2005 ; EN 144-1:2000

  • EN 14303:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made mineral wool (MW) products – Specification

  • EN 14304:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made flexible elastomeric foam (FEF) products – Specification

  • EN 14305:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made cellular glass (CG) products – Specification

  • EN 14306:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made calcium silicate (CS) products – Specification

  • EN 14307:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made extruded polystyrene foam (XPS) products – Specification

  • EN 14308:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products – Specification

  • EN 14309:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made products of expanded polystyrene (EPS) – Specification

  • EN 14313:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made polyethylene foam (PEF) products – Specification

  • EN 14314:2009 ; Thermal insulation products for building equipment and industrial installations – Factory made phenolic foam (PF) products – Specification

  • EN 14316-1:2004 ; Thermal insulation products for buildings – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 14317-1:2004 ; Thermal insulation products for buildings – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 14321-2:2005 ; Glass in building – Thermally toughened alkaline earth silicate safety glass – Part 2: Evaluation of conformity/Product standard

  • EN 14325:2004 ; Protective clothing against chemicals – Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages

  • EN 14328:2005 ; Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods

  • EN 1433:2002 ; Drainage channels for vehicular and pedestrian areas – Classification, design and testing requirements, marking and evaluation of conformity

  • EN 1433:2002/A1:2005 ; EN 1457-1:2012 (new)

  • EN 14339:2005 ; Underground fire hydrants

  • EN 14341:2006 ; Industrial valves – Steel check valves

  • EN 1434-1:2007 ; Heat meters – Part 1: General requirements

  • EN 14342:2005+A1:2008 ; Wood flooring – Characteristics, evaluation of conformity and marking

  • EN 1434-2:2007 ; Heat meters – Part 2: Constructional requirements

  • EN 1434-2:2007/AC:2007 ; EN 1434-4:2007

  • EN 14344:2004 ; Child use and care articles – Child seats for cycles – Safety requirements and test methods

  • EN 1434-4:2007 ; Heat meters – Part 4: Pattern approval tests

  • EN 1434-4:2007/AC:2007 ; EN 1434-5:2007

  • EN 1434-5:2007 ; Heat meters – Part 5: Initial verification tests

  • EN 14348:2005 ; Chemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants – Test methods and requirements (phase 2, step 1)

  • EN 14350-1:2004 ; Child use and care articles – Drinking equipment – Part 1: General and mechanical requirements and tests

  • EN 14351-1:2006+A1:2010 ; Windows and doors – Product standard, performance characteristics – Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

  • EN 14353:2007+A1:2010 ; Metal beads and feature profiles for use with gypsum plasterboards – Definitions, requirements and test methods

  • EN 14359:2006+A1:2010 ; Gas-loaded accumulators for fluid power applications

  • EN 14360:2004 ; Protective clothing against rain – Test method for ready made garments – Impact from above with high energy droplets

  • EN 14373:2005 ; Explosion suppression systems

  • EN 14374:2004 ; Timber structures – Structural laminated veneer lumber – Requirements

  • EN 14382:2005+A1:2009 ; Safety devices for gas pressure regulating stations and installations – Gas safety shut-off devices for inlet pressures up to 100 bar

  • EN 14382:2005+A1:2009/AC:2009 ; EN 14394:2005+A1:2008

  • EN 14384:2005 ; Pillar fire hydrants

  • EN 14387:2004+A1:2008 ; Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking

  • EN 14388:2005 ; Road traffic noise reducing devices – Specifications

  • EN 14388:2005/AC:2008 ; EN 14396:2004

  • EN 14394:2005+A1:2008 ; Heating boilers – Heating boilers with forced draught burners – Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C

  • EN 14396:2004 ; Fixed ladders for manholes

  • EN 14399-1:2005 ; High-strength structural bolting assemblies for preloading – Part 1: General requirements

  • EN 14404:2004+A1:2010 ; Personal protective equipment – Knee protectors for work in the kneeling position

  • EN 144-1:2000 ; Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector

  • EN 14411:2006 ; Ceramic tiles – Definitions, classification, characteristics and marking

  • EN 144-2:1998 ; Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections

  • EN 14428:2004+A1:2008 ; Shower enclosures – Functional requirements and test methods

  • EN 144-3:2003 ; Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen

  • EN 144-3:2003/AC:2003 ; EN 145:1997

  • EN 14435:2004 ; Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking

  • EN 14438:2006 ; Gas-fired insets for heating more than one room

  • EN 14439:2006+A2:2009 ; Cranes – Safety – Tower cranes

  • EN 14449:2005 ; Glass in building – Laminated glass and laminated safety glass – Evaluation of conformity/Product standard

  • EN 14449:2005/AC:2005 ; EN 14471:2005

  • EN 14458:2004 ; Personal eye-equipment – Faceshields and visors for use with firefighters’ and high performance industrial safety helmets used by firefighters, ambulance and emergency services

  • EN 14460:2006 ; Explosion resistant equipment

  • EN 14462:2005+A1:2009 ; Surface treatment equipment – Noise test code for surface treatment equipment including its ancillary handling equipment – Accuracy grades 2 and 3

  • EN 14466:2005+A1:2008 ; Fire-fighting pumps – Portable pumps – Safety and performance requirements, tests

  • EN 14471:2005 ; Chimneys – System chimneys with plastic flue liners – Requirements and test methods

  • EN 14491:2012 (new) ; Dust explosion venting protective systems

  • EN 14492-1:2006+A1:2009 ; Cranes – Power driven winches and hoists – Part 1: Power driven winches

  • EN 14492-1:2006+A1:2009/AC:2010 ; EN 14492-2:2006+A1:2009

  • EN 14492-2:2006+A1:2009 ; Cranes – Power driven winches and hoists – Part 2: Power driven hoists

  • EN 14492-2:2006+A1:2009/AC:2010 ; EN 14502-2:2005+A1:2008

  • EN 14492-2:2006+A1:2009/AC:2010 ; EN 14522:2005

  • EN 14496:2005 ; Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards – Definitions, requirements and test methods

  • EN 145:1997 ; Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking

  • EN 14502-2:2005+A1:2008 ; Cranes – Equipment for the lifting of persons – Part 2: Elevating control stations

  • EN 14508:2003 ; Postal services – Quality of service – Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail

  • EN 14509:2006 ; Self-supporting double skin metal faced insulating panels – Factory made products – Specifications

  • EN 14509:2006/AC:2008 ; EN 14516:2006+A1:2010

  • EN 14516:2006+A1:2010 ; Baths for domestic purposes

  • EN 14522:2005 ; Determination of the auto ignition temperature of gases and vapours

  • EN 14527:2006+A1:2010 ; Shower trays for domestic purposes

  • EN 14528:2007 ; Bidets – Functional requirements and test methods

  • EN 14529:2005 ; Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only

  • EN 14531-6:2009 ; Railway applications – Methods for calculation of stopping and slowing distances and immobilisation braking – Part 6: Step by step calculations for train sets or single vehicles

  • EN 14534:2003 ; Postal services – Quality of service – Measurement of the transit time of end-to-end services for bulk mail

  • EN 14543:2005+A1:2007 ; Specification for dedicated liquefied petroleum gas appliances – Parasol patio heaters – Flueless radiant heaters for outdoor or amply ventilated area use

  • EN 14545:2008 ; Timber structures – Connectors – Requirements

  • EN 14561:2006 ; Chemical disinfectants and antiseptics – Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area – Test method and requirements (phase 2, step 2)

  • EN 14562:2006 ; Chemical disinfectants and antiseptics – Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area – Test method and requirements (phase 2, step 2)

  • EN 14563:2008 ; Chemical disinfectants and antiseptics – Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area – Test method and requirements (phase 2, step 2)

  • EN 14566:2008+A1:2009 ; Mechanical fasteners for gypsum plasterboard systems – Definitions, requirements and test methods

  • EN 14570:2005 ; Equipping of LPG tanks, overground and underground

  • EN 1457-1:2012 (new) ; Chimneys – Clay/ceramic flue liners – Part 1: Flue liners operating under dry conditions – Requirements and test methods

  • EN 1457-2:2012 (new) ; Chimneys – Clay/ceramic flue liners – Part 2: Flue liners operating under wet conditions – Requirements and test methods

  • EN 1458-1:1999 ; Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW – Part 1: Safety

  • EN 1458-2:1999 ; Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6kW – Part 2: Rational use of energy

  • EN 14585-1:2006 ; Corrugated metal hose assemblies for pressure applications – Part 1: Requirements

  • EN 14587-2:2009 ; Railway applications – Track – Flash butt welding of rails – Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant

  • EN 1459:1998+A3:2012 ; Safety of industrial trucks – Self-propelled variable reach trucks

  • EN 14591-1:2004 ; Explosion prevention and protection in underground mines – Protective systems – Part 1: 2-bar explosion proof ventilation structure

  • EN 14591-1:2004/AC:2006 ; EN 14591-2:2007

  • EN 14591-2:2007 ; Explosion prevention and protection in underground mines – Protective systems – Part 2: Passive water trough barriers

  • EN 14591-2:2007/AC:2008 ; EN 14591-4:2007

  • EN 14591-4:2007 ; Explosion prevention and protection in underground mines – Protective systems – Part 4: Automatic extinguishing systems for road headers

  • EN 14591-4:2007/AC:2008 ; EN 14677:2008

  • EN 14592:2008 ; Timber structures – Dowel-type fasteners – Requirements

  • EN 14593-1:2005 ; Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking

  • EN 14593-2:2005 ; Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 2: Apparatus with a half mask at positive pressure – Requirements, testing, marking

  • EN 14593-2:2005/AC:2005 ; EN 14594:2005

  • EN 14594:2005 ; Respiratory protective devices – Continuous flow compressed air line breathing apparatus – Requirements, testing, marking

  • EN 14594:2005/AC:2005 ; EN 14605:2005+A1:2009

  • EN 14601:2005+A1:2010 ; Railway applications – Straight and angled end cocks for brake pipe and main reservoir pipe

  • EN 14604:2005 ; Smoke alarm devices

  • EN 14604:2005/AC:2008 ; EN 14647:2005

  • EN 14605:2005+A1:2009 ; Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

  • EN 1463-1:2009 ; Road marking materials – Retroreflecting road studs – Part 1: Initial performance requirements

  • EN 14647:2005 ; Calcium aluminate cement – Composition, specifications and conformity criteria

  • EN 14647:2005/AC:2006 ; EN 14680:2006

  • EN 14655:2005+A1:2010 ; Food processing machinery – Baguette slicers – Safety and hygiene requirements

  • EN 14656:2006+A1:2010 ; Safety of machinery – Safety requirements for extrusion presses for steel and non-ferrous metals

  • EN 14658:2005+A1:2010 ; Continuous handling equipment and systems – General safety requirements for continuous handling equipment for opencast lignite mining

  • EN 1466:2004 ; Child care articles – Carry cots and stands – Safety requirements and test methods

  • EN 14673:2006+A1:2010 ; Safety of machinery – Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

  • EN 14677:2008 ; Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel

  • EN 14678-1:2006+A1:2009 ; LPG equipment and accessories – Construction and performance of LPG equipment for automotive filling stations – Part 1: Dispensers

  • EN 14680:2006 ; Adhesives for non-pressure thermoplastic piping systems – Specifications

  • EN 14681:2006+A1:2010 ; Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces

  • EN 14682:2004 ; Safety of children’s clothing – Cords and drawstrings on children’s clothing – Specifications

  • EN 14683:2005 ; Surgical masks – Requirements and test methods

  • EN 14688:2006 ; Sanitary appliances – Wash basins – Functional requirements and test methods

  • EN 1469:2004 ; Natural stone products – Slabs for cladding – Requirements

  • EN 14695:2010 ; Flexible sheets for waterproofing – Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete – Definitions and characteristics

  • EN 14710-1:2005+A2:2008 ; Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 1: Classification, general and safety requirements

  • EN 14710-2:2005+A2:2008 ; Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 2: Verification of general and safety requirements

  • EN 14716:2004 ; Stretched ceilings – Requirements and test methods

  • EN 14753:2007 ; Safety of machinery – Safety requirements for machinery and equipment for continuous casting of steel

  • EN 14756:2006 ; Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours

  • EN 14764:2005 ; City and trekking bicycles – Safety requirements and test methods

  • EN 14766:2005 ; Mountain-bicycles – Safety requirements and test methods

  • EN 14781:2005 ; Racing bicycles – Safety requirements and test methods

  • EN 14782:2006 ; Self-supporting metal sheet for roofing, external cladding and internal lining – Product specification and requirements

  • EN 14783:2006 ; Fully supported metal sheet and strip for roofing, external cladding and internal lining – Product specification and requirements

  • EN 14785:2006 ; Residential space heating appliances fired by wood pellets – Requirements and test methods

  • EN 14786:2006 ; Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions – Atomizer test

  • EN 14797:2006 ; Explosion venting devices

  • EN 14800:2007 ; Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels

  • EN 148-1:1999 ; Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection

  • EN 14813-1:2006+A1:2010 ; Railway applications – Air conditioning for driving cabs – Part 1: Comfort parameters

  • EN 14813-2:2006+A1:2010 ; Railway applications – Air conditioning for driving cabs – Part 2: Type tests

  • EN 14814:2007 ; Adhesives for thermoplastic piping systems for fluids under pressure – Specifications

  • EN 148-2:1999 ; Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection

  • EN 14820:2004 ; Single-use containers for human venous blood specimen collection

  • EN 14829:2007 ; Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

  • EN 148-3:1999 ; Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3

  • EN 14843:2007 ; Precast concrete products – Stairs

  • EN 14844:2006+A2:2011 (new) ; Precast concrete products – Box culverts

  • EN 14846:2008 ; Building hardware – Locks and latches – Electromechanically operated locks and striking plates – Requirements and test methods

  • EN 1486:2007 ; Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting

  • EN 14865-1:2009+A1:2010 ; Railway applications – Axlebox lubricating greases – Part 1: Method to test the ability to lubricate

  • EN 14865-2:2006+A2:2010 ; Railway applications – Axlebox lubricating greases – Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h

  • EN 14872:2006 ; Bicycles – Accessories for bicycles – Luggage carriers

  • EN 14886:2008 ; Plastics and rubber machines – Bandknife cutting machines for block foams – Safety requirements

  • EN 14889-1:2006 ; Fibres for concrete – Part 1: Steel fibres – Definitions, specifications and conformity

  • EN 14889-2:2006 ; Fibres for concrete – Part 2: Polymer fibres – Definitions, specifications and conformity

  • EN 149:2001+A1:2009 ; Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking

  • EN 14904:2006 ; Surfaces for sports areas – Indoor surfaces for multi-sports use – Specification

  • EN 14909:2006 ; Flexible sheets for waterproofing – Plastic and rubber damp proof courses – Definitions and characteristics

  • EN 14910:2007+A1:2009 ; Garden equipment – Walk-behind combustion engine powered trimmers – Safety

  • EN 14915:2006 ; Solid wood panelling and cladding – Characteristics, evaluation of conformity and marking

  • EN 14915:2006/AC:2007 ; EN 14933:2007

  • EN 14917:2009+A1:2012 (new) ; Metal bellows expansion joints for pressure applications

  • EN 1492-1:2000+A1:2008 ; Textile slings – Safety – Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

  • EN 1492-2:2000+A1:2008 ; Textile slings – Safety – Part 2: Roundslings made of man-made fibres for general purpose use

  • EN 1492-4:2004+A1:2008 ; Textile slings – Safety – Part 4: Lifting slings for general service made from natural and man-made fibre ropes

  • EN 1493:2010 ; Vehicle lifts

  • EN 14930:2007+A1:2009 ; Agricultural and forestry machinery and gardening equipment – Pedestrian controlled and hand-held machines – Determination of accessibility of hot surfaces

  • EN 14931:2006 ; Pressure vessels for human occupancy (PVHO) – Multi-place pressure chamber systems for hyperbaric therapy – Performance, safety requirements and testing

  • EN 14933:2007 ; Thermal insulation and light weight fill products for civil engineering applications – Factory made products of expanded polystyrene (EPS) – Specification

  • EN 14934:2007 ; Thermal insulation and light weight fill products for civil engineering applications – Factory made products of extruded polystyrene foam (XPS) – Specification

  • EN 1494:2000+A1:2008 ; Mobile or movable jacks and associated lifting equipment

  • EN 1495:1997+A2:2009 ; Lifting platforms – Mast climbing work platforms

  • EN 14957:2006+A1:2010 ; Food processing machinery – Dishwashing machines with conveyor – Safety and hygiene requirements

  • EN 14958:2006+A1:2009 ; Food processing machinery – Machinery for grinding and processing flour and semolina – Safety and hygiene requirements

  • EN 14963:2006 ; Roof coverings – Continuous rooflights of plastics with or without upstands – Classification, requirements and test methods

  • EN 14964:2006 ; Rigid underlays for discontinuous roofing – Definitions and characteristics

  • EN 14967:2006 ; Flexible sheets for waterproofing – Bitumen damp proof courses – Definitions and characteristics

  • EN 1497:2007 ; Personal fall protection equipment – Rescue harnesses

  • EN 14973:2006+A1:2008 ; Conveyor belts for use in underground installations – Electrical and flammability safety requirements

  • EN 14983:2007 ; Explosion prevention and protection in underground mines – Equipment and protective systems for firedamp drainage

  • EN 14985:2012 ; Cranes – Slewing jib cranes

  • EN 14986:2007 ; Design of fans working in potentially explosive atmospheres

  • EN 14989-1:2007 ; Chimneys – Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications – Part 1: Vertical air/flue terminals for C6-type appliances

  • EN 14989-2:2007 ; Chimneys – Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications – Part 2: Flue and air supply ducts for room sealed appliances

  • EN 14991:2007 ; Precast concrete products – Foundation elements

  • EN 14992:2007 ; Precast concrete products – Wall elements

  • EN 14994:2007 ; Gas explosion venting protective systems

  • EN 15000:2008 ; Safety of industrial trucks – Self propelled variable reach trucks – Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

  • EN 15001-1:2009 ; Gas Infrastructure – Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations – Part 1: Detailed functional requirements for design, materials, construction, inspection and testing

  • EN 15011:2011 ; Cranes – Bridge and gantry cranes

  • EN 1501-1:2011 ; Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles

  • EN 1501-2:2005+A1:2009 ; Refuse collection vehicles and associated lifting devices – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles

  • EN 1501-3:2008 ; Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles

  • EN 1501-4:2007 ; Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 4: Noise test code for refuse collection vehicles

  • EN 1501-5:2011 ; Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles

  • EN 15020:2006+A1:2010 ; Railway applications – Rescue coupler – Performance requirements, specific interface geometry and test methods

  • EN 15027:2007+A1:2009 ; Transportable wall saw and wire saw equipment for job site – Safety

  • EN 15033:2006 ; Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats

  • EN 15033:2006/AC:2008 ; Reference and title of the harmonised standard

  • EN 15037-1:2008 ; Precast concrete products – Beam-and-block floor systems – Part 1: Beams

  • EN 15037-2:2009+A1:2011 ; Precast concrete products – Beam-and-block floor systems – Part 2: Concrete blocks

  • EN 15037-3:2009+A1:2011 ; Precast concrete products – Beam-and-block floor systems – Part 3: Clay blocks

  • EN 15037-4:2010 ; Precast concrete products – Beam-and-block floor systems – Part 4: Expanded polystyrene blocks

  • EN 1504-2:2004 ; Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 2: Surface protection systems for concrete

  • EN 1504-3:2005 ; Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 3: Structural and non-structural repair

  • EN 1504-4:2004 ; Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 4: Structural bonding

  • EN 1504-5:2004 ; Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 5: Concrete injection

  • EN 1504-6:2006 ; Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 6: Anchoring of reinforcing steel bar

  • EN 1504-7:2006 ; Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 7: Reinforcement corrosion protection

  • EN 15048-1:2007 ; Non-preloaded structural bolting assemblies – Part 1: General requirements

  • EN 15050:2007+A1:2012 (new) ; Precast concrete products – Bridge elements

  • EN 15056:2006+A1:2009 ; Cranes – Requirements for container handling spreaders

  • EN 15059:2009 ; Snow grooming equipment – Safety requirements

  • EN 15061:2007+A1:2008 ; Safety of machinery – Safety requirements for strip processing line machinery and equipment

  • EN 15067:2007 ; Plastics and rubber machines – Film converting machines for bags and sacks – Safety requirements

  • EN 15069:2008 ; Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel

  • EN 15088:2005 ; Aluminium and aluminium alloys – Structural products for construction works – Technical conditions for inspection and delivery

  • EN 15089:2009 ; Explosion isolation systems

  • EN 15090:2012 (new) ; Footwear for firefighters

  • EN 15093:2008 ; Safety of Machinery – Safety requirements for hot flat rolling mills

  • EN 15094:2008 ; Safety of Machinery – Safety requirements for cold flat rolling mills

  • EN 15095:2007+A1:2008 ; Power-operated mobile racking and shelving, carousels and storage lifts – Safety requirements

  • EN 15102:2007+A1:2011 (new) ; Decorative wall coverings – Roll and panel form

  • EN 15129:2009 ; Anti-seismic devices

  • EN 15151-1:2012 (new) ; Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods

  • EN 1515-4:2009 ; Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC

  • EN 15162:2008 ; Machines and plants for mining and tooling of natural stone – Safety requirements for gang saws

  • EN 15163:2008 ; Machines and installations for the exploitation and processing of natural stone – Safety – Requirements for diamond wire saws

  • EN 15164:2008 ; Machines and plants for mining and tooling of natural stone – Safety – Requirements for chain- and belt-slotting machines

  • EN 15166:2008 ; Food processing machinery – Automatic back splitting machines of butchery carcasses – Safety and hygiene requirements

  • EN 15167-1:2006 ; Ground granulated blast furnace slag for use in concrete, mortar and grout – Part 1: Definitions, specifications and conformity criteria

  • EN 15188:2007 ; Determination of the spontaneous ignition behaviour of dust accumulations

  • EN 15198:2007 ; Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres

  • EN 1520:2011 ; Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

  • EN 15227:2008+A1:2010 ; Railway applications – Crashworthiness requirements for railway vehicle bodies

  • EN 15233:2007 ; Methodology for functional safety assessment of protective systems for potentially explosive atmospheres

  • EN 15250:2007 ; Slow heat release appliances fired by solid fuel – Requirements and test methods

  • EN 15258:2008 ; Precast concrete products – Retaining wall elements

  • EN 1526:1997+A1:2008 ; Safety of industrial trucks – Additional requirements for automated functions on trucks

  • EN 15268:2008 ; Petrol filling stations – Safety requirements for the construction of submersible pump assemblies

  • EN 15273-2:2009 ; Railway applications – Gauges – Part 2: Rolling stock gauge

  • EN 15273-3:2009 ; Railway applications – Gauges – Part 3: Structure gauges

  • EN 15274:2007 ; General purpose adhesives for structural assembly – Requirements and test methods

  • EN 15275:2007 ; Structural adhesives – Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

  • EN 15275:2007/AC:2010 ; EN 15283-1:2008+A1:2009

  • EN 15283-1:2008+A1:2009 ; Gypsum boards with fibrous reinforcement – Definitions, requirements and test methods – Part 1: Gypsum boards with mat reinforcement

  • EN 15283-2:2008+A1:2009 ; Gypsum boards with fibrous reinforcement – Definitions, requirements and test methods – Part 2: Gypsum fibre boards

  • EN 15285:2008 ; Agglomerated stone – Modular tiles for flooring and stairs (internal and external)

  • EN 15285:2008/AC:2008 ; EN 15322:2009

  • EN 15302:2008+A1:2010 ; Railway applications – Method for determining the equivalent conicity

  • EN 15313:2010 ; Railway applications – In-service wheelset operation requirements – In-service and off-vehicle wheelset maintenance

  • EN 15322:2009 ; Bitumen and bituminous binders – Framework for specifying cut-back and fluxed bituminous binders

  • EN 15333-1:2008 ; Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus

  • EN 15333-1:2008/AC:2009 ; EN 15333-2:2009

  • EN 15333-2:2009 ; Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus

  • EN 15355:2008+A1:2010 ; Railway applications – Braking – Distributor valves and distributor-isolating devices

  • EN 15368:2008+A1:2010 ; Hydraulic binder for non-structural applications – Definition, specifications and conformity criteria

  • EN 15381:2008 ; Geotextiles and geotextile-related products – Characteristics required for use in pavements and asphalt overlays

  • EN 15382:2008 ; Geosynthetic barriers – Characteristics required for use in transportation infrastructure

  • EN 1539:2009 ; Dryers and ovens, in which flammable substances are released – Safety requirements

  • EN 15427:2008+A1:2010 ; Railway applications – Wheel/rail friction management – Flange lubrication

  • EN 15435:2008 ; Precast concrete products – Normal weight and lightweight concrete shuttering blocks – Product properties and performance

  • EN 15437-1:2009 ; Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 1: Track side equipment and rolling stock axlebox

  • EN 15461:2008+A1:2010 ; Railway applications – Noise emission – Characterisation of the dynamic properties of track sections for pass by noise measurements

  • EN 1547:2001+A1:2009 ; Industrial thermoprocessing equipment – Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

  • EN 15498:2008 ; Precast concrete products – Wood-chip concrete shuttering blocks – Product properties and performance

  • EN 1550:1997+A1:2008 ; Machine-tools safety – Safety requirements for the design and construction of work holding chucks

  • EN 15503:2009 ; Garden equipment – Garden blowers, vacuums and blower/vacuums – Safety

  • EN 1554:2012 ; Conveyor belts – Drum friction testing

  • EN 15551:2009+A1:2010 ; Railway applications – Railway rolling stock – Buffers

  • EN 15566:2009+A1:2010 ; Railway applications – Railway rolling stock – Draw gear and screw coupling

  • EN 15594:2009 ; Railway applications – Track – Restoration of rails by electric arc welding

  • EN 15599-1:2010 ; Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 15600-1:2010 ; Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation

  • EN 15609:2012 (new) ; LPG equipment and accessories – LPG propulsion systems for boats, yachts and other craft

  • EN 15610:2009 ; Railway applications – Noise emission – Rail roughness measurement related to rolling noise generation

  • EN 15611:2008+A1:2010 ; Railway applications – Braking – Relay valves

  • EN 15612:2008+A1:2010 ; Railway applications – Braking – Brake pipe accelerator valve

  • EN 15613:2008 ; Knee and elbow protectors for indoor sports – Safety requirements and test methods

  • EN 15614:2007 ; Protective clothing for firefighters – Laboratory test methods and performance requirements for wildland clothing

  • EN 1562:2012 (new) ; Founding – Malleable cast irons

  • EN 15624:2008+A1:2010 ; Railway applications – Braking – Empty-loaded changeover devices

  • EN 15625:2008+A1:2010 ; Railway applications – Braking – Automatic variable load sensing devices

  • EN 1563:2011 ; Founding – Spheroidal graphite cast irons

  • EN 1564:2011 ; Founding – Ausferritic spheroidal graphite cast irons

  • EN 15650:2010 ; Ventilation for buildings – Fire dampers

  • EN 15663:2009 ; Railway applications – Definition of vehicle reference masses

  • EN 15663:2009/AC:2010 ; EN 15686:2010

  • EN 15686:2010 ; Railway applications – Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G

  • EN 15687:2010 ; Railway applications – Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN

  • EN 15695-1:2009 ; Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 1: Cab classification, requirements and test procedures

  • EN 15695-2:2009 ; Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures

  • EN 15700:2011 ; Safety for conveyor belts for winter sport or leisure use

  • EN 1570-1:2011 ; Safety requirements for lifting tables – Part 1: Lifting tables serving up to two fixed landings

  • EN 15723:2010 ; Railway applications – Closing and locking devices for payload protecting devices against environmental influences – Requirements for durability, operation, indication, maintenance, recycling

  • EN 15734-1:2010 ; Railway applications – Braking systems of high speed trains – Part 1: Requirements and definitions

  • EN 15734-2:2010 ; Railway applications – Braking systems of high speed trains – Part 2: Test methods

  • EN 15743:2010 ; Supersulfated cement – Composition, specifications and conformity criteria

  • EN 15746-1:2010 ; Railway applications – Track – Road-rail machines and associated equipment – Part 1: Technical requirements for running and working

  • EN 15746-2:2010 ; Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements

  • EN 15746-2:2010+A1:2011 ; Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements

  • EN 15774:2010 ; Food processing machinery – Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) – Safety and hygiene requirements

  • EN 15776:2011 ; Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %

  • EN 15794:2009 ; Determination of explosion points of flammable liquids

  • EN 15806:2010 ; Railway applications – Braking – Static brake testing

  • EN 15807:2011 ; Railway applications – Pneumatic half couplings

  • EN 15811:2009 ; Agricultural machinery – Guards for moving parts of power transmission – Guard opening with tool (ISO/TS 28923:2007 modified)

  • EN 15811:2009/AC:2010 ; EN 15830:2012

  • EN 15821:2010 ; Multi-firing sauna stoves fired by natural wood logs – Requirements and test methods

  • EN 15824:2009 ; Specifications for external renders and internal plasters based on organic binders

  • EN 15827:2011 ; Railway applications – Requirements for bogies and running gears

  • EN 15830:2012 ; Rough-terrain variable reach trucks – Visibility – Test methods and verification

  • EN 15861:2012 ; Food processing machinery – Smokehouses – Safety and hygiene requirements

  • EN 15892:2011 ; Railway applications – Noise Emission – Measurement of noise inside driver’s cabs

  • EN 15895:2011 ; Cartridge operated hand-held tools – Safety requirements – Fixing and hard marking tools

  • EN 1591-1:2001+A1:2009 ; Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation method

  • EN 1591-1:2001+A1:2009/AC:2011 ; EN 1626:2008

  • EN 15947-1:2010 ; Pyrotechnic articles – Fireworks, Categories 1, 2, and 3 – Part 1: Terminology

  • EN 15947-2:2010 ; Pyrotechnic articles – Fireworks, Categories 1, 2, and 3 – Part 2: Categories and types of firework

  • EN 15947-3:2010 (new) ; Pyrotechnic articles – Fireworks, Categories 1, 2, and 3 – Part 3: Minimum labelling requirements

  • EN 15949:2012 ; Safety of machinery – Safety requirements for bar mills, structural steel mills and wire rod mills

  • EN 1596:1998 ; Specification for dedicated liquefied petroleum gas appliances – Mobile and portable non-domestic forced convection direct fired air heaters

  • EN 15967:2011 ; Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

  • EN 15986:2011 ; Symbol for use in the labelling of medical devices – Requirements for labelling of medical devices containing phthalates

  • EN 15997:2011 ; All terrain vehicles (ATVs – Quads) – Safety requirements and test methods

  • EN 16009:2011 ; Flameless explosion venting devices

  • EN 16020:2011 ; Explosion diverters

  • EN 16027:2011 ; Protective clothing – Gloves with protective effect for association football goal keepers

  • EN 16029:2012 ; Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads – Single-track two-wheel motor vehicles – Safety requirements and test methods

  • EN 161:2007 ; Automatic shut-off valves for gas burners and gas appliances

  • EN 1612-1:1997+A1:2008 ; Plastics and rubber machines – Reaction moulding machines – Part 1: Safety requirements for metering and mixing units

  • EN 16156:2010 ; Cigarettes – Assessment of the ignition propensity – Safety requirement

  • EN 1618:1997 ; Catheters other than intravascular catheters – Test methods for common properties

  • EN 1621-1:1997 ; Motorcyclists’ protective clothing against mechanical impact – Part 1: Requirements and test methods for impact protectors

  • EN 1621-2:2003 ; Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods

  • EN 1621-2:2003/AC:2006 ; EN 1731:2006

  • EN 1626:2008 ; Cryogenic vessels – Valves for cryogenic service

  • EN 1639:2009 ; Dentistry – Medical devices for dentistry – Instruments

  • EN 1640:2009 ; Dentistry – Medical devices for dentistry – Equipment

  • EN 1641:2009 ; Dentistry – Medical devices for dentistry – Materials

  • EN 1642:2011 ; Dentistry – Medical devices for dentistry – Dental implants

  • EN 1643:2000 ; Valve proving systems for automatic shut-off valves for gas burners and gas appliances

  • EN 1651:1999 ; Paragliding equipment – Harnesses – Safety requirements and strength tests

  • EN 1653:1997 ; Copper and copper alloys – Plate, sheet and circles for boilers, pressure vessels and hot water storage units

  • EN 166:2001 ; Personal eye-protection – Specifications

  • EN 167:2001 ; Personal eye-protection – Optical test methods

  • EN 1672-2:2005+A1:2009 ; Food processing machinery – Basic concepts – Part 2: Hygiene requirements

  • EN 1673:2000+A1:2009 ; Food processing machinery – Rotary rack ovens – Safety and hygiene requirements

  • EN 1674:2000+A1:2009 ; Food processing machinery – Dough and pastry brakes – Safety and hygiene requirements

  • EN 1677-1:2000+A1:2008 ; Components for slings – Safety – Part 1: Forged steel components, Grade 8

  • EN 1677-2:2000+A1:2008 ; Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, Grade 8

  • EN 1677-3:2001+A1:2008 ; Components for slings – Safety – Part 3: Forged steel self-locking hooks – Grade 8

  • EN 1677-4:2000+A1:2008 ; Components for slings – Safety – Part 4: Links, Grade 8

  • EN 1677-5:2001+A1:2008 ; Components for slings – Safety – Part 5: Forged steel lifting hooks with latch – Grade 4

  • EN 1677-6:2001+A1:2008 ; Components for slings – Safety – Part 6: Links – Grade 4

  • EN 1678:1998+A1:2010 ; Food processing machinery – Vegetable cutting machines – Safety and hygiene requirements

  • EN 1679-1:1998+A1:2011 ; Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines

  • EN 168:2001 ; Personal eye-protection – Non-optical test methods

  • EN 169:2002 ; Personal eye-protection – Filters for welding and related techniques – Transmittance requirements and recommended use

  • EN 170:2002 ; Personal eye-protection – Ultraviolet filters – Transmittance requirements and recommended use

  • EN 1707:1996 ; Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment – Lock fittings

  • EN 1709:2004 ; Safety requirements for cableway installations designed to carry persons – Precommissioning inspection, maintenance, operational inspection and checks

  • EN 171:2002 ; Personal eye-protection – Infrared filters – Transmittance requirements and recommended use

  • EN 1710:2005+A1:2008 ; Equipment and components intended for use in potentially explosive atmospheres in underground mines

  • EN 1710:2005+A1:2008/AC:2010 ; EN 1755:2000+A1:2009

  • EN 172:1994 ; Personal eye protection – Sunglare filters for industrial use

  • EN 1731:2006 ; Personal eye protection – Mesh eye and face protectors

  • EN 174:2001 ; Personal eye-protection – Ski goggles for downhill skiing

  • EN 1748-1-2:2004 ; Glass in building – Special basic products – Borosilicate glasses – Part 1-2: Evaluation of conformity/Product standard

  • EN 1748-2-2:2004 ; Glass in building – Special basic products – Glass ceramics – Part 2-2: Evaluation of conformity/Product standard

  • EN 175:1997 ; Personal protection – Equipment for eye and face protection during welding and allied processes

  • EN 1755:2000+A1:2009 ; Safety of industrial trucks – Operation in potentially explosive atmospheres – Use in flammable gas, vapour, mist and dust

  • EN 1756-1:2001+A1:2008 ; Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods

  • EN 1756-2:2004+A1:2009 ; Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 2: Tail lifts for passengers

  • EN 1759-3:2003 ; Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 3: Copper alloy flanges

  • EN 1759-3:2003/AC:2004 ; EN 1759-4:2003

  • EN 1759-4:2003 ; Flanges and their joint – Circular flanges for pipes, valves, fittings and accessories, class designated – Part 4: Aluminium alloy flanges

  • EN 1760-1:1997+A1:2009 ; Safety of machinery – Pressure sensitive protective devices – Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

  • EN 1760-2:2001+A1:2009 ; Safety of machinery – Pressure sensitive protective devices – Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars

  • EN 1760-3:2004+A1:2009 ; Safety of machinery – Pressure sensitive protective devices – Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices

  • EN 1777:2010 ; Hydraulic platforms (HPs) for fire fighting and rescue services – Safety requirements and testing

  • EN 1782:1998+A1:2009 ; Tracheal tubes and connectors

  • EN 1789:2007+A1:2010 ; Medical vehicles and their equipment – Road ambulances

  • EN 179:2008 ; Building hardware – Emergency exit devices operated by a lever handle or push pad, for use on escape routes – Requirements and test methods

  • EN 1797:2001 ; Cryogenic vessels – Gas/material compatibility

  • EN 1804-1:2001+A1:2010 ; Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements

  • EN 1804-2:2001+A1:2010 ; Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams

  • EN 1804-3:2006+A1:2010 ; Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 3: Hydraulic control systems

  • EN 1806:2006 ; Chimneys – Clay/ceramic flue blocks for single wall chimneys – Requirements and test methods

  • EN 1807:1999+A1:2009 ; Safety of woodworking machines – Band sawing machines

  • EN 1808:1999+A1:2010 ; Safety requirements on Suspended Access Equipment – Design calculations, stability criteria, construction – Tests

  • EN 1809:1997 ; Diving accessories – Buoyancy compensators – Functional and safety requirements, test methods

  • EN 1820:2005+A1:2009 ; Anaesthetic reservoir bags (ISO 5362:2000, modified)

  • EN 1825-1:2004 ; Grease separators – Part 1: Principles of design, performance and testing, marking and quality control

  • EN 1825-1:2004/AC:2006 ; EN 1856-1:2009

  • EN 1827:1999+A1:2009 ; Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking

  • EN 1829-1:2010 ; High pressure water jet machines – Safety requirements – Part 1: Machines

  • EN 1829-2:2008 ; High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors

  • EN 1829-2:2008/AC:2011 ; EN 1837:1999+A1:2009

  • EN 1834-1:2000 ; Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 1: Group II engines for use in flammable gas and vapour atmospheres

  • EN 1834-2:2000 ; Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust

  • EN 1834-3:2000 ; Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 3: Group II engines for use in flammable dust atmospheres

  • EN 1836:2005+A1:2007 ; Personal eye-equipment – Sunglasses and sunglare filters for general use and filters for direct observation of the sun

  • EN 1837:1999+A1:2009 ; Safety of machinery – Integral lighting of machines

  • EN 1839:2012 (new) ; Determination of explosion limits of gases and vapours

  • EN 1845:2007 ; Footwear manufacturing machines – Footwear moulding machines – Safety requirements

  • EN 1846-2:2009 ; Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance

  • EN 1846-3:2002+A1:2008 ; Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance

  • EN 1853:1999+A1:2009 ; Agricultural machinery – Trailers with tipping body – Safety

  • EN 1854:2010 (new) ; Pressure sensing devices for gas burners and gas burning appliances

  • EN 1856-1:2009 ; Chimneys – Requirements for metal chimneys – Part 1: System chimney products

  • EN 1856-2:2009 ; Chimneys – Requirements for metal chimneys – Part 2: Metal flue liners and connecting flue pipes

  • EN 1857:2010 ; Chimneys – Components – Concrete flue liners

  • EN 1858:2008+A1:2011 ; Chimneys – Components – Concrete flue blocks

  • EN 1860-1:2003 ; Appliances, solid fuels and firelighters for barbecuing – Part 1: Barbecues burning solid fuels – Requirements and test methods

  • EN 1863-2:2004 ; Glass in building – Heat strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard

  • EN 1865-3:2012 ; Patient handling equipment used in road ambulances – Part 3: Heavy duty stretcher

  • EN 1865-4:2012 ; Patient handling equipment used in road ambulances – Part 4: Foldable patient transfer chair

  • EN 1865-5:2012 ; Patient handling equipment used in road ambulances – Part 5: Stretcher support

  • EN 1866:2005 ; Mobile fire extinguishers

  • EN 1868:1997 ; Personal protective equipment against falls from a height – List of equivalent terms

  • EN 1870-1:2007+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

  • EN 1870-10:2003+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

  • EN 1870-11:2003+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

  • EN 1870-12:2003+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 12: Pendulum cross-cut sawing machines

  • EN 1870-13:2007+A2:2012 ; Safety of woodworking machines – Circular sawing machines – Part 13: Horizontal beam panel sawing machines

  • EN 1870-14:2007+A2:2012 ; Safety of woodworking machines – Circular sawing machines – Part 14: Vertical panel sawing machines

  • EN 1870-15:2004+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

  • EN 1870-16:2005+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 16: Double mitre sawing machines for V-cutting

  • EN 1870-17:2007+A2:2009 ; Safety of woodworking machines – Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)

  • EN 1870-3:2001+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

  • EN 1870-4:2012 ; Safety of woodworking machines – Circular sawing machines – Part 4: Multiblade rip sawing machines with manual loading and/or unloading

  • EN 1870-5:2002+A2:2012 (new) ; Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

  • EN 1870-6:2002+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading

  • EN 1870-7:2002+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

  • EN 1870-8:2001+A1:2009 ; Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

  • EN 1870-9:2012 (new) ; Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

  • EN 1873:2005 ; Prefabricated accessories for roofing – Individual roof lights of plastics – Product specification and test methods

  • EN 1889-1:2011 ; Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles

  • EN 1889-2:2003+A1:2009 ; Machines for underground mines – Mobile machines working underground – Safety – Part 2: Rail locomotives

  • EN 1891:1998 ; Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes

  • EN 19:2002 ; Industrial valves – Marking of metallic valves

  • EN 1908:2004 ; Safety requirements for cableway installations designed to carry persons – Tensioning devices

  • EN 1909:2004 ; Safety requirements for cableway installations designed to carry persons – Recovery and evacuation

  • EN 1915-1:2001+A1:2009 ; Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements

  • EN 1915-2:2001+A1:2009 ; Aircraft ground support equipment – General requirements – Part 2: Stability and strength requirements, calculations and test methods

  • EN 1915-3:2004+A1:2009 ; Aircraft ground support equipment – General requirements – Part 3: Vibration measurement methods and reduction

  • EN 1915-4:2004+A1:2009 ; Aircraft ground support equipment – General requirements – Part 4: Noise measurement methods and reduction

  • EN 1916:2002 ; Concrete pipes and fittings, unreinforced, steel fibre and reinforced

  • EN 1916:2002/AC:2008 ; EN 1917:2002

  • EN 1917:2002 ; Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

  • EN 1917:2002/AC:2008 ; EN 1935:2002

  • EN 1935:2002 ; Building hardware – Single-axis hinges – Requirements and test methods

  • EN 1935:2002/AC:2003 ; EN 10025-1:2004

  • EN 1938:2010 ; Personal eye protection – Goggles for motorcycle and moped users

  • EN 1953:1998+A1:2009 ; Atomising and spraying equipment for coating materials – Safety requirements

  • EN 197-1:2011 (new) ; Cement – Part 1: Composition, specifications and conformity criteria for common cements

  • EN 1974:1998+A1:2009 ; Food processing machinery – Slicing machines – Safety and hygiene requirements

  • EN 1983:2006 ; Industrial valves – Steel ball valves

  • EN 1984:2010 ; Industrial valves – Steel gate valves

  • EN 1985:1998 ; Walking aids – General requirements and test methods

  • EN 201:2009 ; Plastics and rubber machines – Injection moulding machines – Safety requirements

  • EN 203-1:2005+A1:2008 ; Gas heated catering equipment – Part 1: General safety rules

  • EN 203-2-1:2005 ; Gas heated catering equipment – Part 2-1: Specific requirements – Open burners and wok burners

  • EN 203-2-10:2007 ; Gas heated catering equipment – Part 2-10: Specific requirements – Chargrills

  • EN 203-2-11:2006 ; Gas heated catering equipment – Part 2-11: Specific requirements – Pasta cookers

  • EN 203-2-2:2006 ; Gas heated catering equipment – Part 2-2: Specific requirements – Ovens

  • EN 203-2-3:2005 ; Gas heated catering equipment – Part 2-3: Specific requirements – Boiling pans

  • EN 203-2-4:2005 ; Gas heated catering equipment – Part 2-4: Specific requirements – Fryers

  • EN 203-2-6:2005 ; Gas heated catering equipment – Part 2-6: Specific requirements – Hot water heaters for beverage

  • EN 203-2-7:2007 ; Gas heated catering equipment – Part 2-7: Specific requirements – Salamanders and rotisseries

  • EN 203-2-8:2005 ; Gas heated catering equipment – Part 2-8: Specific requirements – Brat pans and paëlla cookers

  • EN 203-2-9:2005 ; Gas heated catering equipment – Part 2-9: Specific requirements – Solid tops, warming plates and griddles

  • EN 203-3:2009 ; Gas heated catering equipment – Part 3: Materials and parts in contact with food and other sanitary aspects

  • EN 20594-1:1993 ; Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment – Part 1: General requirements (ISO 594-1:1986)

  • EN 20594-1:1993/AC:1996 ; EN ISO 21171:2006

  • EN 207:2009 ; Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)

  • EN 207:2009/AC:2011 ; EN 208:2009

  • EN 208:2009 ; Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)

  • EN 24869-1:1992 ; Acoustics – Hearing protectors – Subjective method for the measurement of sound attenuation (ISO 4869-1:1990)

  • EN 250:2000 ; Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing, marking

  • EN 257:2010 (new) ; Mechanical thermostats for gas-burning appliances

  • EN 26:1997 ; Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)

  • EN 26:1997/AC:1998 ; EN 30-1-1:2008+A1:2010 (new)

  • EN 267:2009+A1:2011 ; Automatic forced draught burners for liquid fuels

  • EN 269:1994 ; Respiratory protective devices – Powered fresh air hose breathing apparatus incorporating a hood – Requirements, testing, marking

  • EN 27740:1992 ; Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)

  • EN 27740:1992/AC:1996 ; EN ISO 81060-1:2012

  • EN 280:2001+A2:2009 ; Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests

  • EN 285:2006+A2:2009 ; Sterilization – Steam sterilizers – Large sterilizers

  • EN 286-1:1998 ; Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes

  • EN 286-1:1998/AC:2002 ; EN 286-2:1992

  • EN 286-2:1992 ; Simple unfired pressure vessels designed to contain air or nitrogen – Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers

  • EN 286-2:1992/AC:1992 ; EN 286-3:1994

  • EN 286-3:1994 ; Simple unfired pressure vessels designed to contain air or nitrogen – Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock

  • EN 286-4:1994 ; Simple unfired pressure vessels designed to contain air or nitrogen – Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock

  • EN 287-1:2011 ; Qualification test of welders – Fusion welding – Part 1: Steels

  • EN 287-1:2011 (new) ; Qualification test of welders – Fusion welding – Part 1: Steels

  • EN 28846:1993 ; Small craft – Electrical devices – Protection against ignition of surrounding flammable gases (ISO 8846:1990)

  • EN 28848:1993 ; Small craft – Remote steering systems (ISO 8848:1990)

  • EN 289:2004+A1:2008 ; Plastics and rubber machines – Presses – Safety requirements

  • EN 295-10:2005 ; Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 10: Performance requirements

  • EN 297:1994 ; Gas-fired central heating boilers – Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW

  • EN 297:1994/A2:1996/AC:2006 ; EN 298:2003

  • EN 29775:1993 ; Small craft – Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)

  • EN 298:2003 ; Automatic gas burner control systems for gas burners and gas burning appliances with or without fans

  • EN 300 065-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE directive

  • EN 300 065-3 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Part 3: Harmonized EN covering the essential requirements of article 3.3 (e) of the R&TTE directive

  • EN 300 086-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech;Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 086-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 113-2 V1.4.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 113-2 V1.5.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 135-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Citizens’ Band (CB) radio equipment; Angle-modulated Citizens’ Band radio equipment (PR 27 Radio Equipment);Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 152-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime Emergency Position Indicating Radio Beacons (EPIRBs) intended for use on the frequency 121,5 MHz or the frequencies 121,5 MHz and 243 MHz for homing purposes only; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 300 152-3 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime Emergency Position Indicating Radio Beacons (EPIRBs) intended for use on the frequency 121,5 MHz or the frequencies 121,5 MHz and 243 MHz for homing purposes only; Part 3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive

  • EN 300 219-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 220-2 V2.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 220-2 V2.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 220-2 V2.4.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 224-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 300 296-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 296-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 328 V1.7.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 328 V1.8.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 330-2 V1.5.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 341-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 300 373-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 373-3 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive; Equipment with integrated or associated equipment for Class E Digital Selective Calling (DSC)

  • EN 300 386 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

  • EN 300 386 V1.5.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

  • EN 300 386 V1.6.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

  • EN 300 390-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 422-2 V1.2.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 422-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 433-2 V1.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated citizen’s band radio equipment; Part 2: Harmonized EN covering essential requirements under article 3.2 of R&TTE Directive

  • EN 300 433-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Citizens’ Band (CB) radio equipment; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 440-2 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 454-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 300 471-2 V1.1.1 ; Electromagnetic Compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Rules for Access and the Sharing of common used channels by equipment complying with EN 300 113; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 300 609-4 V9.2.1 ; Global System for Mobile communications (GSM); Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 674-2-1 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive; Sub-part 1: Requirements for the Road Side Units (RSU)

  • EN 300 674-2-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive; Sub-part 2: Requirements for the On-Board Units (OBU)

  • EN 300 676-2 V1.4.1 ; Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 676-2 V1.5.1 ; Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation;Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 698-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 698-3 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Part 3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive

  • EN 300 718-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 300 718-3 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering the essential requirements of article 3.3e of the R&TTE Directive

  • EN 300 720-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 300 761-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2,45 GHz frequency range; Part 2: Harmonized standard covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 301 025-2 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class “D” Digital Selective Calling (DSC); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 025-3 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class “D” Digital Selective Calling (DSC); Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive

  • EN 301 091-2 V1.3.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 166-2 V1.2.3 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 178-2 V1.2.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 357-2 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 360 V1.2.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 301 406 V2.1.1 ; Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering the essential requirements under article 3.2 of the R&TTE Directive; Generic radio

  • EN 301 423 V1.1.1 ; Electromagnetic Compatibility and Radio spectrum Matters (ERM); Harmonized Standard for the Terrestrial Flight Telecommunications System under article 3.2 of the R&TTE Directive

  • EN 301 426 V1.2.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5/1,6 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 301 427 V1.2.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Low data rate Mobile satellite Earth Stations (MESs) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive

  • EN 301 428 V1.3.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive

  • EN 301 430 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11-12/13-14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 301 441 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,6/2,4 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under Article 3.2 of the R&TTE directive

  • EN 301 442 V1.2.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under article 3.2 of the R&TTE directive

  • EN 301 443 V1.3.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 301 444 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering essential requirements under Article 3.2 of the R&TTE Directive

  • EN 301 444 V1.2.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering essential requirements of article 3.2 of the R&TTE directive

  • EN 301 447 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements of article 3.2 of the R&TTE directive

  • EN 301 449 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized EN for CDMA spread spectrum base stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 459 V1.4.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit in the 29,5 GHz to 30,0 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 301 489-1 V1.8.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

  • EN 301 489-1 V1.9.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

  • EN 301 489-10 V1.3.1 ; ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment

  • EN 301 489-11 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters

  • EN 301 489-12 V2.2.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)

  • EN 301 489-13 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 13: Specific conditions for Citizens’ Band (CB) radio and ancillary equipment (speech and non-speech)

  • EN 301 489-14 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters

  • EN 301 489-15 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment

  • EN 301 489-16 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable

  • EN 301 489-17 V2.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems

  • EN 301 489-17 V2.2.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems

  • EN 301 489-18 V1.3.1 ; ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment

  • EN 301 489-19 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communication

  • EN 301 489-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment

  • EN 301 489-20 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)

  • EN 301 489-22 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific requirements for ground-based VHF aeronautical mobile and fixed radio equipment

  • EN 301 489-23 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment

  • EN 301 489-23 V1.5.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment

  • EN 301 489-24 V1.5.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24:Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment

  • EN 301 489-25 V2.3.2 ; Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 25: Specific conditions for CDMA 1x Spread Spectrum Mobile Stations and ancillary equipment

  • EN 301 489-26 V2.3.2 ; Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 26: Specific conditions for CDMA 1x spread spectrum base stations, repeaters and ancillary equipment

  • EN 301 489-27 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)

  • EN 301 489-28 V1.1.1 ; Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for wireless digital video links

  • EN 301 489-29 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands

  • EN 301 489-3 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz

  • EN 301 489-31 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)

  • EN 301 489-32 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 32: Specific conditions for Ground and Wall Probing Radar applications

  • EN 301 489-33 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 33: Specific conditions for Ultra Wide Band (UWB) communications devices

  • EN 301 489-34 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

  • EN 301 489-34 V1.3.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

  • EN 301 489-4 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links, Broadband Data Transmission System Base stations, ancillary equipment and services

  • EN 301 489-5 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)

  • EN 301 489-6 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment

  • EN 301 489-7 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)

  • EN 301 489-8 V1.2.1 ; ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations

  • EN 301 489-9 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices

  • EN 301 502 V9.2.1 ; Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 511 V9.0.2 ; Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)

  • EN 301 526 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum mobile stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 559-2 V1.1.2 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the frequency range 2 483,5 MHz to 2 500 MHz;Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 681 V1.3.2 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under Article 3.2 of the R&TTE directive

  • EN 301 681 V1.4.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,5/1,6 GHz bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 721 V1.2.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz covering essential requirements under Article 3.2 of the R&TTE Directive

  • EN 301 783-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 796 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT1 and CT1+ cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive

  • EN 301 797 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive

  • EN 301 839-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 840-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital wireless microphones operating in the CEPT harmonized band 1785 MHz to 1 800 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 301 841-3 V1.1.1 ; VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 843-1 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements

  • EN 301 843-1 V1.3.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements

  • EN 301 843-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for VHF radiotelephone transmitters and receivers

  • EN 301 843-4 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific conditions for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers

  • EN 301 843-5 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 5: Specific conditions for MF/HF radiotelephone transmitters and receivers

  • EN 301 843-6 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 6: Specific conditions for Earth Stations on board Vessels operating in frequency bands above 3 GHz

  • EN 301 893 V1.5.1 ; Broadband Radio Access Networks (BRAN);5 GHz high performance RLAN;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 893 V1.6.1 ; Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 893 V1.7.1 (new) ; Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-1 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-1 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements

  • EN 301 908-10 V4.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-11 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-11 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 11: CDMA Direct Spread (UTRA FDD) (Repeaters)

  • EN 301 908-12 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 12: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-13 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 13: Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-13 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)

  • EN 301 908-14 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 14: Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-14 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)

  • EN 301 908-15 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 15: Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (FDD Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-15 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters)

  • EN 301 908-16 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 16: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-17 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 17: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-18 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)

  • EN 301 908-19 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 19: OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)

  • EN 301 908-2 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-2 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)

  • EN 301 908-20 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 20: OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS)

  • EN 301 908-21 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 21: OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipment (UE)

  • EN 301 908-22 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 22: OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)

  • EN 301 908-3 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD and E-UTRA FDD) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-3 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)

  • EN 301 908-4 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-4 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)

  • EN 301 908-5 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) and Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-5 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 5: CDMA Multi-Carrier (cdma2000) Base Stations (BS)

  • EN 301 908-6 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-6 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 6: CDMA TDD (UTRA TDD) User Equipment (UE)

  • EN 301 908-7 V4.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD and E-UTRA TDD) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-7 V5.2.1 ; IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 7: CDMA TDD (UTRA TDD) Base Stations (BS)

  • EN 301 908-8 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 908-9 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 301 929-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 301 997-2 V1.1.1 ; Transmission and Multiplexing (TM); Multipoint equipment; Radio equipment for use in Multimedia Wireless Systems (MWS) in the frequency band 40,5 GHz to 43,5 GHz; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 30-1-1:2008+A1:2010 (new) ; Domestic cooking appliances burning gas – Part 1-1: Safety – General

  • EN 30-1-2:1999 ; Domestic cooking appliances burning gas – Part 1-2: Safety – Appliances having forced-convection ovens and/or grills

  • EN 30-1-3:2003+A1:2006 ; Domestic cooking appliances burning gas – Part 1-3: Safety – Appliances having a glass ceramic hotplate

  • EN 30-1-4:2002 ; Domestic cooking appliances burning gas – Part 1-4: Safety – Appliances having one or more burners with an automatic burner control system

  • EN 302 017-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 018-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 054-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 302 064-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 065 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band technology (UWB) for communications purposes; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 066-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 077-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial – Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 186 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft Earth Stations (AESs)operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive

  • EN 302 194-2 V1.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 195-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories;Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 208-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 208-2 V1.4.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 217-2-2 V1.3.1 ; Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas;Part 2-2: Digital systems operating in frequency bands where frequency co-ordination is applied;Harmonized EN covering the essential requirements of Article 3.2 of the R&TTE Directive

  • EN 302 217-2-2 V1.4.1 ; Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency co-ordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 217-3 V1.3.1 ; Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 3: Equipment operating in frequency bands where both frequency coordinated or uncoordinated deployment might be applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 217-4-2 V1.5.1 ; Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-2: Antennas; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 245-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service; Part 2: Harmonised EN under article 3.2 of the R&TTE Directive

  • EN 302 248 V1.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Navigation radar for use on non-SOLAS vessels;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 264-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 288-2 V1.3.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range;Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 288-2 V1.6.1 (new) ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 291-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Close Range Inductive Data Communication equipment operating at 13,56 MHz; Part 2: Harmonised EN under article 3.2 of the R&TTE Directive

  • EN 302 296 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 296-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 297 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the analogue television broadcasting service; Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 326-2 V1.2.2 ; Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment

  • EN 302 326-3 V1.3.1 ; Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas

  • EN 302 340 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements under article 3.2 of the R&TTE directive

  • EN 302 372-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detection and Movement; Tanks Level Probing Radar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61 GHz and 77 GHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

  • EN 302 372-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detection and Movement; Tanks Level Probing Radar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61 GHz and 77 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 426 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum repeaters operating in the 450 MHz cellular band (CDMA450) and the 410, 450 and 870 MHz PAMR bands (CDMA PAMR) covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 435-2 V1.3.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 448 V1.1.1 ; Satellite Earth Stations and Systems (SES);Harmonized EN for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive

  • EN 302 454-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 480 V1.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for the GSM onboard aircraft system covering the essential requirements of Article 3.2 of the R&TTE Directive

  • EN 302 498-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 500-2 V2.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 502 V1.2.1 ; Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 510-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 536-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 537-2 V1.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Medical Data Service Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 544-1 V1.1.2 ; Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 1: TDD Base Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 544-2 V1.1.1 ; Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 2: TDD User Equipment Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 561 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 567 V1.1.1 ; Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 567 V1.2.1 ; Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 571 V1.1.1 ; Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 574-1 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1: Complementary Ground Component (CGC) for wideband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 574-2 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 2: User Equipment (UE) for wideband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 574-3 V1.1.1 ; Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to- earth) frequency bands; Part 3: User Equipment (UE) for narrowband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 608 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Radio equipment for Eurobalise railway systems;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 609 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Radio equipment for Euroloop railway systems;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 617-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 623 V1.1.1 ; Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Mobile Terminal Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 625 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); 5 GHz BroadBand Disaster Relief applications (BBDR); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 645 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Global Navigation Satellite Systems (GNSS) Repeaters; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 686 V1.1.1 ; Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 729-2 V1.1.2 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 752 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 774 V1.1.1 ; Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Base Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 774 V1.2.1 (new) ; Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band;Base Stations;Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 858-2 V1.2.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24,05 GHz to 24,25 GHz frequency range for automotive application; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 885-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 302 885-3 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive

  • EN 302 977 V1.1.2 ; Satellite Earth Stations and Systems (SES); Harmonized EN for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE directive

  • EN 302 998-1 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for terrestrial mobile TV to provide multimedia multicast service; Part 1: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive, Common requirements

  • EN 302 998-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for terrestrial mobile TV to provide multimedia multicast service; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive, Test Arrangements for transmitters utilizing OFDM technology

  • EN 30-2-1:1998 ; Domestic cooking appliances burning gas – Part 2-1: Rational use of energy – General

  • EN 30-2-1:1998/A1:2003/AC:2004 ; EN 30-2-2:1999

  • EN 30-2-2:1999 ; Domestic cooking appliances burning gas – Part 2-2: Rational use of energy – Appliances having forced-convection ovens and/or grills

  • EN 303 035-1 V1.2.1 ; Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE directive; Part 1: Voice plus Data (V+D)

  • EN 303 035-2 V1.2.2 ; Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE directive; Part 2: Direct Mode Operation (DMO)

  • EN 303 213-6-1 V1.1.1 ; Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW

  • EN 30326-1:1994 ; Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1:1992)

  • EN 303-3:1998 ; Heating boilers – Part 3: Gas-fired central heating boilers – Assembly comprising a boiler body and a forced draught burner

  • EN 303-3:1998/AC:2006 ; EN 303-7:2006

  • EN 303-5:2012 ; Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking

  • EN 303-7:2006 ; Heating boilers – Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW

  • EN 305 550-2 V1.1.1 ; Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive

  • EN 331:1998 ; Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings

  • EN 331:1998/A1:2010 ; EN 413-1:2011

  • EN 334:2005+A1:2009 ; Gas pressure regulators for inlet pressures up to 100 bar

  • EN 340:2003 ; Protective clothing – General requirements

  • EN 342:2004 ; Protective clothing – Ensembles and garments for protection against cold

  • EN 342:2004/AC:2008 ; EN 343:2003+A1:2007

  • EN 343:2003+A1:2007 ; Protective clothing – Protection against rain

  • EN 343:2003+A1:2007/AC:2009 ; EN 348:1992

  • EN 348:1992 ; Protective clothing – Test method: Determination of behaviour of materials on impact of small splashes of molten metal

  • EN 348:1992/AC:1993 ; EN 352-1:2002

  • EN 349:1993+A1:2008 ; Safety of machinery – Minimum gaps to avoid crushing of parts of the human body

  • EN 352-1:2002 ; Hearing protectors – General requirements – Part 1: Ear-Muffs

  • EN 352-2:2002 ; Hearing protectors – General requirements – Part 2: Ear-plugs

  • EN 352-3:2002 ; Hearing protectors – General requirements – Part 3: Ear-muffs attached to an industrial safety helmet

  • EN 352-4:2001 ; Hearing protectors – Safety requirements and testing – Part 4: Level-dependent ear-muffs

  • EN 352-5:2002 ; Hearing protectors – Safety requirements and testing – Part 5: Active noise reduction ear-muffs

  • EN 352-6:2002 ; Hearing protectors – Safety requirements and testing – Part 6: Ear-muffs with electrical audio input

  • EN 352-7:2002 ; Hearing protectors – Safety requirements and testing – Part 7: Level-dependent ear-plugs

  • EN 352-8:2008 ; Hearing protectors – Safety requirements and testing – Part 8: Entertainment audio ear-muffs

  • EN 353-2:2002 ; Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line

  • EN 354:2010 ; Personal fall protection equipment – Lanyards

  • EN 355:2002 ; Personal protective equipment against falls from a height – Energy absorbers

  • EN 358:1999 ; Personal protective equipment for work positioning and prevention of falls from a height – Belts for work positioning and restraint and work positioning lanyards

  • EN 360:2002 ; Personal protective equipment against falls from a height – Retractable type fall arresters

  • EN 361:2002 ; Personal protective equipment against falls from a height – Full body harnesses

  • EN 362:2004 ; Personal protective equipment against falls from a height – Connectors

  • EN 363:2008 ; Personal fall protection equipment – Personal fall protection systems

  • EN 364:1992 ; Personal protective equipment against falls from a height – Test methods

  • EN 364:1992/AC:1993 ; EN 365:2004

  • EN 365:2004 ; Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

  • EN 365:2004/AC:2006 ; EN 367:1992

  • EN 367:1992 ; Protective clothing – Protection against heat and fire – Method of determining heat transmission on exposure to flame

  • EN 367:1992/AC:1992 ; EN 374-1:2003

  • EN 374-1:2003 ; Protective gloves against chemicals and micro-organisms – Part 1: Terminology and performance requirements

  • EN 374-2:2003 ; Protective gloves against chemicals and micro-organisms – Part 2: Determination of resistance to penetration

  • EN 374-3:2003 ; Protective gloves against chemicals and micro-organisms – Part 3: Determination of resistance to permeation by chemicals

  • EN 374-3:2003/AC:2006 ; EN 379:2003+A1:2009

  • EN 377:1993 ; Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes

  • EN 378-2:2008+A2:2012 ; Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation

  • EN 378-2:2008+A2:2012 (new) ; Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation

  • EN 379:2003+A1:2009 ; Personal eye-protection – Automatic welding filters

  • EN 3-8:2006 ; Portable fire extinguishers – Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar

  • EN 3-8:2006/AC:2007 ; EN 19:2002

  • EN 381-1:1993 ; Protective clothing for users of hand-held chainsaws – Part 1: Test rig for testing resistance to cutting by a chainsaw

  • EN 381-10:2002 ; Protective clothing for users of hand-held chainsaws – Part 10: Test method for upper body protectors

  • EN 381-11:2002 ; Protective clothing for users of hand-held chainsaws – Part 11: Requirements for upper body protectors

  • EN 381-2:1995 ; Protective clothing for users of hand-held chain saws – Part 2: Test methods for leg protectors

  • EN 381-3:1996 ; Protective clothing for users of hand-held chain-saws – Part 3: Test methods for footwear

  • EN 381-4:1999 ; Protective clothing for users of hand-held chainsaws – Part 4: Test methods for chainsaw protective gloves

  • EN 381-5:1995 ; Protective clothing for users of hand-held chain saws – Part 5: Requirements for leg protectors

  • EN 381-7:1999 ; Protective clothing for users of hand-held chainsaws – Part 7: Requirements for chainsaw protective gloves

  • EN 381-8:1997 ; Protective clothing for users of hand-held chain saws – Part 8: Test methods for chain saw protective gaiters

  • EN 381-9:1997 ; Protective clothing for users of hand-held chain saws – Part 9: Requirements for chain saw protective gaiters

  • EN 388:2003 ; Protective gloves against mechanical risks

  • EN 397:2012+A1:2012 (new) ; Industrial safety helmets

  • EN 402:2003 ; Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking

  • EN 403:2004 ; Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking

  • EN 40-4:2005 ; Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns

  • EN 404:2005 ; Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly

  • EN 40-4:2005/AC:2006 ; EN 40-5:2002

  • EN 405:2001+A1:2009 ; Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking

  • EN 40-5:2002 ; Lighting columns – Part 5: Requirements for steel lighting columns

  • EN 40-6:2002 ; Lighting columns – Part 6: Requirements for aluminium lighting columns

  • EN 40-7:2002 ; Lighting columns – Part 7: Requirements for fibre reinforced polymer composite lighting columns

  • EN 407:2004 ; Protective gloves against thermal risks (heat and/or fire)

  • EN 41003:2008 ; Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system

  • EN 413-1:2011 ; Masonry cement – Part 1: Composition, specifications and conformity criteria

  • EN 415-1:2000+A1:2009 ; Packaging machines safety – Part 1: Terminology and classification of packaging machines and associated equipment

  • EN 415-3:1999+A1:2009 ; Safety of packaging machines – Part 3: Form, fill and seal machines

  • EN 415-5:2006+A1:2009 ; Safety of packaging machines – Part 5: Wrapping machines

  • EN 415-6:2006+A1:2009 ; Safety of packaging machines – Part 6: Pallet wrapping machines

  • EN 415-7:2006+A1:2008 ; Safety of packaging machines – Part 7: Group and secondary packaging machines

  • EN 415-8:2008 ; Safety of packaging machines – Part 8: Strapping machines

  • EN 415-9:2009 ; Safety of packaging machines – Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3

  • EN 416-1:2009 ; Single burner gas-fired overhead radiant tube heaters for non-domestic use – Part 1: Safety

  • EN 416-2:2006 ; Single burner gas-fired overhead radiant tube heaters for non-domestic use – Part 2: Rational use of energy

  • EN 419-1:2009 ; Non-domestic gas-fired overhead luminous radiant heaters – Part 1: Safety

  • EN 419-2:2006 ; Non-domestic gas-fired overhead luminous radiant heaters – Part 2: Rational use of energy

  • EN 420:2003+A1:2009 ; Protective gloves – General requirements and test methods

  • EN 421:2010 ; Protective gloves against ionizing radiation and radioactive contamination

  • EN 422:2009 ; Plastics and rubber machines – Blow moulding machines – Safety requirements

  • EN 437:2003+A1:2009 ; Test gases – Test pressures – Appliance categories

  • EN 438-7:2005 ; High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes

  • EN 442-1:1995 ; Radiators and convectors – Part 1: Technical specifications and requirements

  • EN 442-1:1995/A1:2003 ; EN 450-1:2005+A1:2007

  • EN 443:2008 ; Helmets for fire fighting in buildings and other structures

  • EN 449:2002+A1:2007 ; Specification for dedicated liquefied petroleum gas appliances – Domestic flueless space heaters (including diffusive catalytic combustion heaters)

  • EN 450-1:2005+A1:2007 ; Fly ash for concrete – Part 1: Definition, specifications and conformity criteria

  • EN 45011:1998 ; General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)

  • EN 453:2000+A1:2009 ; Food processing machinery – Dough mixers – Safety and hygiene requirements

  • EN 454:2000+A1:2009 ; Food processing machinery – Planetary mixers – Safety and hygiene requirements

  • EN 45501:1992 ; AC:1993

  • EN 45502-1:1997 ; Active implantable medical devices – Part 1: General requirements for safety, marking and information to be provided by the manufacturer

  • EN 45502-1:1997 ; Active implantable medical devices — Part 1: General requirements for safety, marking and information to be provided by the manufacturer

  • EN 45502-2-1:2003 ; Active implantable medical devices — Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)

  • EN 45502-2-1:2004 ; Active implantable medical devices – Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)

  • EN 45502-2-2:2008 ; Active implantable medical devices — Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)

  • EN 45502-2-3:2010 ; Active implantable medical devices – Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems

  • EN 45502-2-3:2010 ; Active implantable medical devices — Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems

  • EN 455-1:2000 ; Medical gloves for single use – Part 1: Requirements and testing for freedom from holes

  • EN 455-3:2006 ; Medical gloves for single use – Part 3: Requirements and testing for biological evaluation

  • EN 455-4:2009 ; Medical gloves for single use – Part 4: Requirements and testing for shelf life determination

  • EN 458:2004 ; Hearing protectors – Recommendations for selection, use, care and maintenance – Guidance document

  • EN 459-1:2010 ; Building lime – Part 1: Definitions, specifications and conformity criteria

  • EN 461:1999 ; Specification for dedicated liquefied petroleum gas appliances – Flueless non-domestic space heaters not exceeding 10 kW

  • EN 464:1994 ; Protective clothing – Protection against liquid and gaseous chemicals, including aerosols and solid particles – Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)

  • EN 469:2005 ; Protective clothing for firefighters – Performance requirements for protective clothing for firefighting

  • EN 469:2005/AC:2006 ; EN 471:2003+A1:2007

  • EN 471:2003+A1:2007 ; High-visibility warning clothing for professional use – Test methods and requirements

  • EN 474-1:2006+A1:2009 ; Earth-moving machinery – Safety – Part 1: General requirements

  • EN 474-10:2006+A1:2009 ; Earth-moving machinery – Safety – Part 10: Requirements for trenchers

  • EN 474-11:2006+A1:2008 ; Earth-moving machinery – Safety – Part 11: Requirements for earth and landfill compactors

  • EN 474-12:2006+A1:2008 ; Earth-moving machinery – Safety – Part 12: Requirements for cable excavators

  • EN 474-2:2006+A1:2008 ; Earth-moving machinery – Safety – Part 2: Requirements for tractor-dozers

  • EN 474-3:2006+A1:2009 ; Earth-moving machinery – Safety – Part 3: Requirements for loaders

  • EN 474-4:2006+A2:2012 ; Earth-moving machinery – Safety – Part 4: Requirements for backhoe loaders

  • EN 474-5:2006+A2:2012 ; Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators

  • EN 474-6:2006+A1:2009 ; Earth-moving machinery – Safety – Part 6: Requirements for dumpers

  • EN 474-7:2006+A1:2009 ; Earth-moving machinery – Safety – Part 7: Requirements for scrapers

  • EN 474-8:2006+A1:2009 ; Earth-moving machinery – Safety – Part 8: Requirements for graders

  • EN 474-9:2006+A1:2009 ; Earth-moving machinery – Safety – Part 9: Requirements for pipelayers

  • EN 483:1999 ; Gas-fired central heating boilers – Type C boilers of nominal heat input not exceeding 70 kW

  • EN 483:1999/A2:2001/AC:2006 ; EN 484:1997

  • EN 484:1997 ; Specification for dedicated liquefied petroleum gas appliances – Independent hotplates, including those incorporating a grill for outdoor use

  • EN 490:2011 (new) ; Concrete roofing tiles and fittings for roof covering and wall cladding – Product specifications

  • EN 492:2004 ; Fibre-cement slates and fittings – Product specification and test methods

  • EN 492:2004/A1:2005 ; EN 492:2004/A2:2006

  • EN 492:2004/A2:2006 ; EN 494:2004+A3:2007

  • EN 494:2004+A3:2007 ; Fibre-cement profiled sheets and fittings – Product specification and test methods

  • EN 497:1997 ; Specification for dedicated liquefied petroleum gas appliances – Multi purpose boiling burners for outdoor use

  • EN 498:1997 ; Specification for dedicated liquefied petroleum gas appliances – Barbecues for outdoor use

  • EN 498:1997/AC:2000 ; EN 509:1999

  • EN 500-1:2006+A1:2009 ; Mobile road construction machinery – Safety – Part 1: Common requirements

  • EN 500-2:2006+A1:2008 ; Mobile road construction machinery – Safety – Part 2: Specific requirements for road-milling machines

  • EN 500-3:2006+A1:2008 ; Mobile road construction machinery – Safety – Part 3: Specific requirements for soil-stabilising machines and recycling machines

  • EN 500-4:2011 ; Mobile road construction machinery – Safety – Part 4: Specific requirements for compaction machines

  • EN 50050:2006 ; Electrical apparatus for potentially explosive atmospheres – Electrostatic hand-held spraying equipment

  • EN 500-6:2006+A1:2008 ; Mobile road construction machinery – Safety – Part 6: Specific requirements for paver-finishers

  • EN 50065-1:2001 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances

  • EN 50065-1:2001/A1:2010 ; EN 50065-1:2011

  • EN 50065-1:2011 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances

  • EN 50065-2-1:2003 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

  • EN 50065-2-1:2003/AC:2003 ; EN 50065-2-2:2003

  • EN 50065-2-2:2003 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

  • EN 50065-2-2:2003/A1:2005/AC:2006 ; EN 50065-2-2:2003/AC:2003

  • EN 50065-2-2:2003/AC:2003 ; EN 50065-2-3:2003

  • EN 50065-2-3:2003 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

  • EN 50065-2-3:2003/AC:2003 ; EN 50083-2:2006

  • EN 50065-4-2:2001 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-2: Low voltage decoupling filters – Safety requirements

  • EN 50065-4-7:2005 ; Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-7: Portable low voltage decoupling filters – Safety requirements

  • EN 50065-4-7:2005/AC:2006 ; EN 50085-1:1997

  • EN 50083-2:2006 ; Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment

  • EN 50083-2:2012 (new) ; Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment

  • EN 50085-1:1997 ; Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements

  • EN 50085-1:2005 ; Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements

  • EN 50085-2-1:2006 ; Cable trunking systems and cable ducting systems for electrical installations — Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings

  • EN 50085-2-1:2006/A1:2011 ; EN 50085-2-2:2008

  • EN 50085-2-2:2008 ; Cable trunking systems and cable ducting systems for electrical installations — Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor

  • EN 50085-2-3:1999 ; Cable trunking systems and cable ducting systems for electrical installations — Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets

  • EN 50085-2-3:2010 ; Cable trunking systems and cable ducting systems for electrical installations — Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets

  • EN 50085-2-4:2009 ; Cable trunking systems and cable ducting systems for electrical installations — Part 2-4: Particular requirements for service poles and service posts

  • EN 50086-2-4:1994 ; Conduit systems for cable management — Part 2-4: Particular requirements for conduit systems buried underground

  • EN 50086-2-4:1994/AC:2001 ; EN 50090-2-2:1996

  • EN 50090-2-2:1996 ; Home and Building Electronic Systems (HBES) — Part 2-2: System overview – General technical requirements

  • EN 50090-2-2:1996/AC:1997 ; EN 50106:2008

  • EN 50090-2-2:1996/AC:1997 ; EN 50121-1:2006

    • |1| -|2|- |3||4|

top

Company Info :

퍼포먼스네트워크(주)

강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
Tel : 02-980-9800(대표전화)
E-Mail: info @ anytest.co.kr (Technical,시험인증)

ALT_TEXT
QR Code Generator
  • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

    [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

  • MIL-Spec Documents2013년 December 11일 - 6:40 pm

    MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

  • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

    아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

  • IP Code2016년 April 12일 - 6:42 pm

    IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

  • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

    ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

November 2024
M T W T F S S
« Aug    
 123
45678910
11121314151617
18192021222324
252627282930  
© Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.