STD-ASTM D XXXX Conti 7

ASTM A , ASTM B ,  ASTM C ,  ASTM D | 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 | , ASTM E , ASTM F , ASTM G

• ASTM D6140 : EN-Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
• ASTM D6141 : EN-Standard Guide for Screening the Clay Portion of a Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
• ASTM D6142 : EN-Standard Test Method for Analysis of Phenol by Capillary Gas Chromatograpy-Supersedes ASTM D 4961
• ASTM D6143 : EN-Standard Test Method for Iron Content of Bisphenol A (44′ – Isopropylidenediphenol)
• ASTM D6144 : EN-Standard Test Method for Analysis of AMS (a-Methylstyrene) by Capillary Gas Chromatography
• ASTM D6145 : EN-Standard Guide for Monitoring Sediment in Watersheds
• ASTM D6146 : EN-Standard Guide for Monitoring Aqueous Nutrients in Watersheds
• ASTM D6147 : EN-Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Force Decay (Stress Relaxation) in Compression
• ASTM D6148 : EN-Standard Practice for the Separation and Examination of Stickies
• ASTM D6149 : EN-Standard Specification for Newsprint Including Newsprint Manufactured from Recycled Fiber
• ASTM D615 : EN-Tentative Specifications for AVIATION GASOLINES
• ASTM D6150 : EN-Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
• ASTM D6151 : EN-Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
• ASTM D6152 : EN-Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
• ASTM D6153 : EN-Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
• ASTM D6154 : EN-Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
• ASTM D6155 : EN-Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
• ASTM D6156 : EN-Standard Practice for Use of Reversed-Phase High Performance Liquid Chromatographic Systems
• ASTM D6157 : EN-Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
• ASTM D6158 : EN-Standard Specification for Mineral Hydraulic Oils
• ASTM D6159 : EN-Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
• ASTM D6160 : EN-Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
• ASTM D6161 : EN-Standard Terminology Used for Microfiltration Ultrafiltration Nanofiltration and Reverse Osmosis Membrane Processes
• ASTM D6162 : EN-Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
• ASTM D6162 REV A : EN-Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
• ASTM D6163 : EN-Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
• ASTM D6163 REV A : EN-Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
• ASTM D6164 : EN-Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
• ASTM D6165 : EN-Standard Guide for the Comparison Detection and Identification of the Odors of Paints Inks and Related Materials
• ASTM D6166 : EN-Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color)
• ASTM D6167 : EN-Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
• ASTM D6168 : EN-Standard Guide for Selection of the Minimum Set of Data Elements Required to Identify Locations Chosen for the Field Collection of Information to Describe Soil Rock and Their Contained Fluids
• ASTM D6169 : EN-Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
• ASTM D617 : EN-Standard Test Method for Punching Quality of Phenolic Laminated Sheets
• ASTM D6170 : EN-Standard Guide for Selecting A Ground-Water Modeling Code
• ASTM D6171 : EN-Standard Guide for Documenting a Ground-Water Modeling Code
• ASTM D6172 : EN-Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
• ASTM D6173 : EN-Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
• ASTM D6174 : EN-Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration
• ASTM D6175 : EN-Standard Test Method for Radial Crush Strength of Extruded Catalyst Particles
• ASTM D6176 : EN-Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
• ASTM D6176M : EN-Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
• ASTM D6177 : EN-Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
• ASTM D6178 : EN-Standard Practice for Estimation of Short-Term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
• ASTM D6179 : EN-Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
• ASTM D618 : EN-Standard Practice for Conditioning Plastics for Testing
• ASTM D6180 : EN-Standard Test Method for Stability of Insulating Oils of Petroleum Origin under Electrical Discharge
• ASTM D6181 : EN-Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin
• ASTM D6182 : EN-Standard Test Method for Flexibility and Adhesion of Finish on Leather-Replaces D4925-89
• ASTM D6183 : EN-Standard Test Method for Tackiness of Finish on Leather-Replaces D4908-89
• ASTM D6184 : EN-Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
• ASTM D6185 : EN-Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
• ASTM D6186 : EN-Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
• ASTM D6187 : EN-Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
• ASTM D6188 : EN-Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
• ASTM D6189 : EN-Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
• ASTM D619 : EN-Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
• ASTM D6190 : EN-Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial
• ASTM D6191 : EN-Standard Test Methods for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
• ASTM D6192 : EN-Standard Tables of Body Measurements for Girls Sizes 7 to 16
• ASTM D6193 : EN-Standard Practice for Stitches and Seams
• ASTM D6194 : EN-Standard Test Method for Glow-Wire Ignition of Materials
• ASTM D6195 : EN-Standard Test Methods for Loop Tack
• ASTM D6196 : EN-Standard Practice for Selection of Sorbents Sampling and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
• ASTM D6197 : EN-Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests
• ASTM D6198 : EN-Standard Guide for Transport Packaging Design-E1:June 2002
• ASTM D6199 : EN-Standard Practice for Quality of Wood Members of Containers and Pallets
• ASTM D620 : EN-Tentative Meathod of Test for Colorfastness of Plastics to Light
• ASTM D6200 : EN-Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
• ASTM D6201 : EN-Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
• ASTM D6202 : EN-Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
• ASTM D6202 REV A : EN-Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
• ASTM D6203 : EN-Standard Test Method for Thermal Stability of Way Lubricants
• ASTM D6204 : EN-Standard Test Method for RubberMeasurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
• ASTM D6205 : EN-Standard Practice for Calibration of the James Static Coefficient of Friction Machine
• ASTM D6206 : EN-Standard Practice for Sampling of Coating Films
• ASTM D6207 : EN-Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
• ASTM D6208 : EN-Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
• ASTM D6209 : EN-Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
• ASTM D621 : EN-Standard Test Methods for Deformation of Plastics Under Load
• ASTM D6210 : EN-Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines-Supersedes ASTM D 6211 REV A
• ASTM D6210 REV A : EN-Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines
• ASTM D6211 : EN-Standard Specification for Fully-Formulated Propylene Glycol-Base Engine Coolant for Heavy-Duty Engines
• ASTM D6211 REV A : EN-Standard Specification for Fully-Formulated Propylene Glycol-Base Engine Coolant for Heavy-Duty Engines
• ASTM D6212 : EN-Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry
• ASTM D6213 : EN-Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
• ASTM D6214 : EN-Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
• ASTM D6215 : EN-Standard Guide for Removal of Oily Soils from Metal Surfaces
• ASTM D6215 REV A : EN-Standard Guide for Removal of Oily Soils from Metal Surfaces
• ASTM D6216 : EN-Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
• ASTM D6217 : EN-Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration-IP Designation: 415/98
• ASTM D622 : EN-Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System-*NOT CURRENT DOCUMENT; E1-1991; Withdrawn November 1997; IHS Notified 10/1998
• ASTM D6221 : EN-Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
• ASTM D6222 : EN-Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
• ASTM D6223 : EN-Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
• ASTM D6223/D6223M : EN-Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
• ASTM D6224 : EN-Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
• ASTM D6225 : EN-Standard Test Method for Granule Cover of Mineral Surfaced Roofing
• ASTM D6226 : EN-Standard Test Method for Open Cell Content of Rigid Cellular Plastics
• ASTM D6227 : EN-Standard Specification for Grade 82 Unleaded Aviation Gasoline
• ASTM D6227 REV A : EN-Standard Specification for Grade 82 Unleaded Aviation Gasoline
• ASTM D6228 : EN-Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
• ASTM D6229 : EN-Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
• ASTM D623 : EN-Standard Test Methods for Rubber Property – Heat Generation and Flexing Fatigue in Compression
• ASTM D6230 : EN-Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
• ASTM D6231 : EN-Standard Specification for HFC-125 (Pentafluoroethane C2HF5)
• ASTM D6232 : EN-Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
• ASTM D6233 : EN-Standard Guide for Data Assessment for Environmental Waste Management Activities
• ASTM D6234 : EN-Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
• ASTM D6235 : EN-Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites
• ASTM D6235 REV A : EN-Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites
• ASTM D6236 : EN-Standard Guide for Coring and Logging Cement – or Lime-Stabilized Soil
• ASTM D6237 : EN-Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
• ASTM D6238 : EN-Standard Test Method for Total Oxygen Demand in Water
• ASTM D6239 : EN-Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
• ASTM D6239 REV A : EN-Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
• ASTM D624 : EN-Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
• ASTM D6240 : EN-Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular
• ASTM D6241 : EN-Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
• ASTM D6242 : EN-Standard Test Method for Mass Unit Area of Nonwoven Fabrics
• ASTM D6243 : EN-Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
• ASTM D6244 : EN-Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
• ASTM D6245 : EN-Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
• ASTM D6246 : EN-Standard Practice for Evaluating the Performance of Diffusive Samplers
• ASTM D6247 : EN-Standard Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry
• ASTM D6248 : EN-Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
• ASTM D6249 : EN-Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
• ASTM D6250 : EN-Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
• ASTM D6251/D6251M : EN-Standard Specification for Wood-Cleated Panelboard Shipping Boxes
• ASTM D6252/D6252M : EN-Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90 Degree Angle
• ASTM D6253 : EN-Standard Practice for Treatment and/or Marking of Wood Packaging Materials
• ASTM D6253 REV A : EN-Standard Practice for Treatment and/or Marking of Wood Packaging Materials
• ASTM D6254/D6254M : EN-Standard Specification for Wirebound Pallet-Type Wood Boxes
• ASTM D6255/D6255M : EN-Standard Specification for Steel or Aluminum Slotted Angle Crates
• ASTM D6256/D6256M : EN-Standard Specification for Wood-Cleated Shipping Boxes with Skidded Load-Bearing Bases
• ASTM D6257 : EN-Standard Specification for Prediluted Aqueous Propylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
• ASTM D6258 : EN-Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
• ASTM D6259 : EN-Standard Practice for Determination of a Pooled Limit of Quantitation
• ASTM D6260 : EN-Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA)
• ASTM D6261 : EN-Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
• ASTM D6262 : EN-Standard Specification for Extruded Compression Molded and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
• ASTM D6263 : EN-Standard Specification for Extruded Rods and Bars Made from Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
• ASTM D6264 : EN-Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
• ASTM D6264/D6264M : EN-Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
• ASTM D6265 : EN-Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
• ASTM D6266 : EN-Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
• ASTM D6266 REV A : EN-Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
• ASTM D6267 : EN-Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
• ASTM D6268 : EN-Standard Practice for Handling Transportation and Storage of HFC-125 Pentafluoroethane (C2HF5)
• ASTM D6269 : EN-Test Method for Solidification Point of p-Xylene
• ASTM D6270 : EN-Standard Practice for Use of Scrap Tires in Civil Engineering Applications
• ASTM D6271 : EN-Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
• ASTM D6272 : EN-Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
• ASTM D6273 : EN-Standard Test Methods for Natural Gas Odor Intensity
• ASTM D6274 : EN-Standard Guide for Conducting Borehole Geophysical Logging – Gamma
• ASTM D6275 : EN-Standard Practice for Laboratory Testing of Bridge Decks
• ASTM D6276 : EN-Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
• ASTM D6276 REV A : EN-Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
• ASTM D6277 : EN-Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
• ASTM D6278 : EN-Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Appartus-Replaces D3945-93
• ASTM D6279 : EN-Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
• ASTM D628 : EN-Standard Specification for Asbestos Tubular Sleeving
• ASTM D628/D628M : EN-Standard Specification for Asbestos Tubular Sleeving
• ASTM D6280 : EN-Standard Specification for Zinc Phosphate Pigments
• ASTM D6281 : EN-Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
• ASTM D6282 : EN-Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
• ASTM D6283 : EN-Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
• ASTM D6284 : EN-Standard Test Method for Rubber Property-Effect of Aqueous Solutions with Available Chlorine and Chloramine
• ASTM D6285 : EN-Standard Guide for Locating Abandoned Wells
• ASTM D6286 : EN-Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
• ASTM D6287 : EN-Standard Practice for Cutting Film and Sheeting Test Specimens
• ASTM D6288 : EN-Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
• ASTM D6289 : EN-Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
• ASTM D629 : EN-Standard Test Methods for Quantitative Analysis of Textiles
• ASTM D6290 : EN-Standard Test Method for Color Determination of Plastic Pellets
• ASTM D6293 : EN-Standard Test Method for Oxygenates and Paraffin Olefin Naphthene Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography
• ASTM D6294 : EN-Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
• ASTM D6294/D6294M : EN-Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
• ASTM D6295/D6295M : EN-Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
• ASTM D6296 : EN-Standard Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multi-Dimensional Gas Chromatography
• ASTM D6297 : EN-Standard Specification for Asphaltic Plug Joints for Bridges
• ASTM D6298 : EN-Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
• ASTM D6299 : EN-Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
• ASTM D6299 REV A : EN-Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
• ASTM D6300 : EN-Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
• ASTM D6301 : EN-Standard Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
• ASTM D6302 : EN-Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
• ASTM D6303 : EN-Standard Test Method for Formaldehyde in Water
• ASTM D6304 : EN-Standard Test Method for Determination of Water in Petroleum Products Lubricating Oils and Additives by Coulometric Karl Fisher Titration
• ASTM D6304 REV A : EN-STANDARD TEST METHOD FOR DETERMINATION OF WATER IN PETROLEUM PRODUCTS LUBRICATING OILS AND ADDITIVES BY COULOMETRIC KARL FISHER TITRATION
• ASTM D6305 : EN-Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
• ASTM D6306 : EN-Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
• ASTM D6307 : EN-Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
• ASTM D6308 : EN-Standard Guide for Identification of Composite Materials in Computerized Material Property Databases
• ASTM D6309 : EN-Standard Guide for Development of Standard Data Records for Computerization of Mechanical Test Data for High-Modulus Fiber-Reinforced Composite Materials
• ASTM D6311 : EN-Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
• ASTM D6312 : EN-Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs
• ASTM D6313 : EN-Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry
• ASTM D6314 : EN-Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials
• ASTM D6315 : EN-Standard Practice for Manual Sampling of Coal from Tops of Barges
• ASTM D6316 : EN-Standard Test Method for Determination of Total Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
• ASTM D6316 REV A : EN-Standard Test Method for Determination of Total Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
• ASTM D6316 REV B : EN-Standard Test Method for Determination of Total Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
• ASTM D6317 : EN-Standard Test Method for Low Level Determination of Total Carbon Inorganic Carbon and Organic Carbon in Water by Ultraviolet Persulfate Oxidation and Membrane Conductivity Detection
• ASTM D6318 : EN-Standard Practice for Calibrating a Fathometer Using a Bar Check Method
• ASTM D6319 : EN-Standard Specification for Nitrile Examination Gloves for Medical Application
• ASTM D6319 REV A : EN-Standard Specification for Nitrile Examination Gloves for Medical Application
• ASTM D632 : EN-Standard Specification for Sodium Chloride
• ASTM D6320 : EN-Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
• ASTM D6320/D6320M : EN-Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
• ASTM D6321 : EN-Standard Practice for the Evaluation of Machine Washable T-Shirts
• ASTM D6322 : EN-Standard Guide to International Test Methods Associated with Textile Care Procedures
• ASTM D6323 : EN-Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
• ASTM D6324 : EN-Standard Test Methods for Male Condoms Made from Synthetic Materials
• ASTM D6324 REV A : EN-Standard Test Methods for Male Condoms Made from Synthetic Materials
• ASTM D6325 : EN-Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
• ASTM D6326 : EN-Standard Practice for the Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
• ASTM D6327 : EN-Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
• ASTM D6328 : EN-Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
• ASTM D6329 : EN-Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
• ASTM D633 : EN-Standard Volume Correction Table for Road Tar
• ASTM D6330 : EN-Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers under Defined Test Conditions
• ASTM D6331 : EN-Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
• ASTM D6332 : EN-Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
• ASTM D6333 : EN-Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
• ASTM D6334 : EN-Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
• ASTM D6335 : EN-Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
• ASTM D6335 REV A : EN-Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
• ASTM D6335 REV B : EN-Standard Test Method for Determination of High Temperature Deposits by Thermo- Oxidation Engine Oil Simulation Test
• ASTM D6336 : EN-Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
• ASTM D6337 : EN-Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
• ASTM D6338 : EN-Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs)
• ASTM D6339 : EN-Standard Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
• ASTM D6340 : EN-Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
• ASTM D6341 : EN-Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes between -30 and 140 Degrees F (-34.4 and 60 Degrees C)
• ASTM D6342 : EN-Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
• ASTM D6343 : EN-Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
• ASTM D6344 : EN-Standard Test Method for Concentrated Impacts to Transport Packages
• ASTM D6345 : EN-Standard Guide for Selection of Methods for Active Integrative Sampling of Volatile Organic Compounds in Air
• ASTM D6346 : EN-Standard Guide for Accepting Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
• ASTM D6347/D6347M : EN-Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
• ASTM D6348 : EN-Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
• ASTM D6349 : EN-Standard Test Method for Determination of Major and Minor Elements in Coal Coke and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
• ASTM D635 : EN-Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position
• ASTM D6350 : EN-Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
• ASTM D6351 : EN-Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
• ASTM D6352 : EN-Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
• ASTM D6353 : EN-Standard Guide for Sampling Plan and Core Sampling or Prebaked Anodes Used in Aluminum Production
• ASTM D6354 : EN-Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
• ASTM D6355 : EN-Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
• ASTM D6356 : EN-Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
• ASTM D6357 : EN-Standard Test Methods for Determination of Trace Elements in Coal Coke and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry Inductively Coupled Plasma
• ASTM D6357 REV A : EN-Standard Test Methods for Determination of Trace Elements in Coal Coke and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry Inductively Coupled Plasma
• ASTM D6358 : EN-Standard Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods
• ASTM D6359 : EN-Standard Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments
• ASTM D6360 : EN-Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
• ASTM D6361 : EN-Standard Guide for Selecting Cleaning Agents and Processes
• ASTM D6361/D6361M : EN-Standard Guide for Selecting Cleaning Agents and Processes
• ASTM D6362 : EN-Standard Practice for Certificates of Reference Materials for Water Analysis
• ASTM D6363 : EN-Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
• ASTM D6364 : EN-Standard Test Method for Determining the Short-Term Compression Behavior of Geosynthetics
• ASTM D6365 : EN-Standard Practice for the Nondestructive Testing of Geomembrane Seams Using the Spark Test
• ASTM D6366 : EN-Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection
• ASTM D6367 : EN-Standard Specification for AMS (a-Methylstyrene)
• ASTM D6368 : EN-Standard Specification for Vapor-Degreasing Grade and General Grade normal-Propyl Bromide
• ASTM D6369 : EN-Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes
• ASTM D637 : EN-Standard Test Method for Surface Irregularities of Flat Transparent Plastic Sheets
• ASTM D6370 : EN-Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
• ASTM D6371 : EN-Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
• ASTM D6372 : EN-Standard Practice for Design Testing and Construction of Micro-Surfacing
• ASTM D6372 REV A : EN-Standard Practice for Design Testing and Construction of Micro-Surfacing
• ASTM D6373 : EN-Standard Specification for Performance Graded Asphalt Binder
• ASTM D6374 : EN-Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
• ASTM D6375 : EN-Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
• ASTM D6375 REV A : EN-Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
• ASTM D6376 : EN-Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
• ASTM D6377 : EN-Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
• ASTM D6378 : EN-Standard Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products Hydrocarbons and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
• ASTM D6379 : EN-Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates – High Performance Liquid Chromatography Method with Refractive Index Detection-IP Designation: 436/01
• ASTM D638 : EN-Tentative methods of Tension Testing of Plastics
• ASTM D638 REV A : EN-Standard Test Method for Tensile Properties of Plastics
• ASTM D638 REV B : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS
• ASTM D6380 : EN-Standard Specification for Asphalt Roll Roofing (Organic Felt)
• ASTM D6381 : EN-Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
• ASTM D6381 REV A : EN-Standard Test Method for Measurement of Asphalt Shingle Tab Mechanical Uplift Resistance
• ASTM D6381 REV B : EN-Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
• ASTM D6382 : EN-Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
• ASTM D6383 : EN-Standard Practice for Time-To-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
• ASTM D6384 : EN-Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
• ASTM D6384 REV A : EN-Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
• ASTM D6385 : EN-Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
• ASTM D6386 : EN-Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
• ASTM D6387 : EN-Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography-Replaces D3009-93
• ASTM D6388 : EN-Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
• ASTM D6389 : EN-Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
• ASTM D638M : EN-Standard Test Method for Tensile Properties of Plastics (Metric)
• ASTM D638M REV A : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS (METRIC)
• ASTM D638M REV B : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS (METRIC)
• ASTM D639 : EN-Standard Methods of Testing Battery Containers Made from Hard Rubber or Equivalent Materials
• ASTM D6390 : EN-Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
• ASTM D6391 : EN-Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
• ASTM D6392 : EN-Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
• ASTM D6393 : EN-Standard Test Method for Bulk Solids Characterization by Carr Indices
• ASTM D6394 : EN-Standard Specification for Sulfone Plastics (SP)
• ASTM D6395 : EN-Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
• ASTM D6396 : EN-Standard Test Method for Testing of Pipe Thread Sealants on Pipes Tees
• ASTM D6398 : EN-Standard Practice to Enhance Indentification of Drug Names on Labels
• ASTM D6399 : EN-Standard Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
• ASTM D6399 REV A : EN-Standard Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
• ASTM D6400 : EN-Standard Specification for Compostable Plastics
• ASTM D6401 : EN-Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
• ASTM D6402 : EN-Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
• ASTM D6403 : EN-Standard Test Method for Determining Moisture in Raw and Spent Materials
• ASTM D6404 : EN-Standard Test Method for Sampling Vegetable Materials Containing Tannin
• ASTM D6405 : EN-Standard Practice for Extraction of Tannins from Raw and Spent Materials
• ASTM D6406 : EN-Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
• ASTM D6407 : EN-Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
• ASTM D6408 : EN-Standard Test Method for Analysis of Tannery Liquors
• ASTM D6409 : EN-Standard Practice for Color Tests with Sheepskin Skiver
• ASTM D6410 : EN-Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
• ASTM D6411/D6411M : EN-Standard Specification for Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
• ASTM D6412/D6412M : EN-Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
• ASTM D6413 : EN-Standard Test Method for Flame Resistance of Textiles (Vertical Test)
• ASTM D6414 : EN-Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
• ASTM D6415 : EN-Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
• ASTM D6415/D6415M : EN-Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
• ASTM D6415/D6415M REV A : EN-Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
• ASTM D6416 : EN-Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
• ASTM D6416/D 6416M : EN-Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
• ASTM D6416/D6416M : EN-Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
• ASTM D6417 : EN-Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
• ASTM D6418 : EN-Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis
• ASTM D6419 : EN-Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
• ASTM D642 : EN-Standard Test Method for Determining Compressive Resistance of Shipping Containers Components and Unit Loads
• ASTM D6420 : EN-Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
• ASTM D6421 : EN-Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
• ASTM D6421 REV A : EN-Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
• ASTM D6422 : EN-Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends
• ASTM D6423 : EN-Standard Test Method for Determination of pHe of Ethanol Denatured Fuel Ethanol and Fuel Ethanol (Ed75-Ed85)
• ASTM D6424 : EN-Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
• ASTM D6424 REV A : EN-Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
• ASTM D6425 : EN-Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
• ASTM D6426 : EN-Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
• ASTM D6426 REV A : EN-Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
• ASTM D6427 : EN-Standard Practice for Handling Transportation and Storage of HFC-236fa 111333-Hexafluoropropane (CF3CH2CF3)
• ASTM D6427/D6427M : EN-Standard Practice for Handling Transportation and Storage of HFC-236fa 111333-Hexafluoropropane (CF3CH2CF3)
• ASTM D6428 : EN-Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection
• ASTM D6429 : EN-Standard Guide for Selecting Surface Geophysical Methods
• ASTM D643 : EN-Standard Test Method for Folding Endurance of Paper by the Schopper Tester
• ASTM D6430 : EN-Standard Guide for Using the Gravity Method for Subsurface Investigation
• ASTM D6431 : EN-Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
• ASTM D6432 : EN-Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
• ASTM D6433 : EN-Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
• ASTM D6434 : EN-Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
• ASTM D6435 : EN-Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes
• ASTM D6436 : EN-Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
• ASTM D6437 : EN-Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
• ASTM D6438 : EN-Standard Test Method for Acetone Methyl Acetate and Parachlorobenzotrifluoride Content of Paints and Coatings by Solid Phase Microextraction-Gas Chromatography
• ASTM D6439 : EN-Standard Guide for Cleaning Flushing and Purification of Steam Gas and Hydroelectric Turbine Lubrication Systems
• ASTM D644 : EN-STANDARD TEST METHOD FOR MOISTURE CONTENT OF PAPER AND PAPERBOARD BY OVEN DRYING
• ASTM D6440 : EN-Standard Terminology Relating to Hydrocarbon Resins
• ASTM D6440 REV A : EN-Standard Terminology Relating to Hydrocarbon Resins
• ASTM D6441 : EN-Standard Test Methods for Measuring the Hiding Power of Powder Coatings
• ASTM D6441 REV A : EN-Standard Test Methods for Measuring the Hiding Power of Powder Coatings
• ASTM D6442 : EN-Standard Test Methods for Copper Release Rates of Antifouling Coating Systems in Seawater
• ASTM D6443 : EN-Standard Test Method for Determination of Calcium Chlorine Copper Magnesium Phosphorus Sulfur and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathemat
• ASTM D6445 : EN-Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
• ASTM D6446 : EN-Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels-IP Designation: 355/98
• ASTM D6447 : EN-Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
• ASTM D6448 : EN-Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
• ASTM D6449 : EN-Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
• ASTM D645 : EN-STANDARD TEST METHOD FOR THICKNESS OF PAPER AND PAPERBOARD
• ASTM D645/D645M : EN-Standard Test Method for Thickness of Paper and Paperboard
• ASTM D6450 : EN-Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
• ASTM D6451 : EN-Standard Guide for Application of Asphalt Based Protection Board
• ASTM D6452 : EN-Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
• ASTM D6453 : EN-Standard Guide for Format of Computerized Exchange of Soil and Rock Test Data
• ASTM D6454 : EN-Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
• ASTM D6455 : EN-Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
• ASTM D6456 : EN-Standard Specification for Finished Parts Made from Polyimide Resin
• ASTM D6457 : EN-Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
• ASTM D6458 : EN-Standard Tables of Body Measurements for Boys Sizes 8 to 14 Slim and 8 to 20 Regular
• ASTM D6459 : EN-Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
• ASTM D6479 : EN-Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
• ASTM D648 : EN-Standard Test Method for Deflection Temperature of Plastics under Flexural Load
• ASTM D648 REV A : EN-Standard Test Method for Deflection Temperature of Plastics under Flexural Load in the Edgewise Position
• ASTM D648 REV C : EN-Standard Test Method for Deflection Temperature of Plastics under Flexural Load in the Edgewise Position
• ASTM D6480 : EN-Standard Test Method for Wipe Sampling of Surfaces Indirect Preparation and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
• ASTM D6481 : EN-Standard Test Method for Determination of Phosphorus Sulfur Calcium and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
• ASTM D6482 : EN-Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
• ASTM D6483 : EN-Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine
• ASTM D6484 : EN-Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
• ASTM D6484/D6484M : EN-Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
• ASTM D6485 : EN-Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volitile Organic Chemicals Emitted from Bedding Sets
• ASTM D6486 : EN-Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
• ASTM D6487 : EN-Standard Practice for Preparing Prints of Paste Printing Inks with the Little Joe Offset Color Proofing Press
• ASTM D6488 : EN-Standard Terminology Relating to Print Problems
• ASTM D6489 : EN-Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated with a Water Repellent Coating
• ASTM D6490 : EN-Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
• ASTM D6491 : EN-Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
• ASTM D6492 : EN-Standard Practice for Detection of Hexavalent Chromium on Zinc and Zinc/Aluminum Alloy Coated Steel
• ASTM D6493 : EN-Standard Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
• ASTM D6494 : EN-Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
• ASTM D6495 : EN-Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
• ASTM D6496 : EN-Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
• ASTM D6496 REV A : EN-Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
• ASTM D6497 : EN-Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
• ASTM D6498 : EN-Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations
• ASTM D6499 : EN-Standard Test Method for the Immunological Measurement of Antigenic Protien in Natural Rubber and Its Products
• ASTM D6500 : EN-Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
• ASTM D6501 : EN-Standard Test Method for Phosphonate in Brines
• ASTM D6502 : EN-Standard Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Flourescence (XRF)
• ASTM D6503 : EN-Standard Test Method for Enterococci in Water Using Enterolert
• ASTM D6504 : EN-Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
• ASTM D6505 : EN-Standard Test Method for Assay of normal-Propyl Bromide Content
• ASTM D6506 : EN-Standard Specification for Asphalt Based Protection Board for Below-Grade Waterproofing
• ASTM D6507 : EN-Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
• ASTM D6508 : EN-Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
• ASTM D6509 : EN-Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
• ASTM D6509/D6509M : EN-Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
• ASTM D651 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF MOLDED ELECTRICAL INSULATING MATERIALS
• ASTM D6510 : EN-Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems
• ASTM D6511 : EN-Standard Test Method for Solvent Bearing Bituminous Compounds
• ASTM D6512 : EN-Standard Practice for Interlaboratory Quantitation Estimate
• ASTM D6513 : EN-Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
• ASTM D6514 : EN-Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
• ASTM D6515 : EN-Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
• ASTM D6517 : EN-Standard Guide for Field Preservation of Ground-Water Samples
• ASTM D6518 : EN-Standard Practice for Bias Testing a Mechanical Coal Sampling System
• ASTM D6518 REV A : EN-Standard Practice for Bias Testing a Mechanical Coal Sampling System
• ASTM D6519 : EN-Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
• ASTM D6520 : EN-Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and Its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
• ASTM D6521 : EN-Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
• ASTM D6521 REV A : EN-Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
• ASTM D6522 : EN-Standard Test Method for Determination of Nitrogen Oxides Carbon Monoxide and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines Combustion Turbines Boilers and Process Heaters Using
• ASTM D6523 : EN-Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
• ASTM D6524 : EN-Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
• ASTM D6525 : EN-Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products
• ASTM D6526 : EN-Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
• ASTM D6527 : EN-Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
• ASTM D6528 : EN-Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
• ASTM D6529 : EN-Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50-1000 MicroS/cm
• ASTM D653 : EN-STANDARD TERMS AND SYMBOLS RELATING TO SOIL AND ROCK
• ASTM D653 REV A : EN-Standard Terminology Relating to Soil Rock and Contained Fluids
• ASTM D653 REV B : EN-Standard Terminology Relating to Soil Rock and Contained Fluids
• ASTM D653 REV C : EN-Standard Terminology Relating to Soil Rock and Contained Fluids
• ASTM D653 REV D : EN-Standard Terminology Relating to Soil Rock and Contained Fluids
• ASTM D653 REV E : EN-Standard Terminology Relating to Soil Rock and Contained Fluids
• ASTM D653 REV F : EN-Standard Terminology Relating to Soil Rock and Contained Fluids
• ASTM D6530 : EN-Standard Test Method for Total Active Biomass in Cooling Towers Waters (Kool Kount Assay; KKA)
• ASTM D6531 : EN-Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
• ASTM D6532 : EN-Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
• ASTM D6534 : EN-Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
• ASTM D6535 : EN-Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
• ASTM D6536 : EN-Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
• ASTM D6537 : EN-Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance
• ASTM D6538 : EN-Standard Guide for Sampling Wastewater With Automatic Samplers
• ASTM D6539 : EN-Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
• ASTM D6540 : EN-Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
• ASTM D6541 : EN-Standard Specification for HFC-236fa 111333-Hexafluoropropane (CF3CH2CF3)1
• ASTM D6542 : EN-Standard Practice for Tonnage Calculation of Coal in a Stockpile
• ASTM D6543 : EN-Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers
• ASTM D6544 : EN-Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
• ASTM D6545 : EN-Standard Test Method for Flammability of Textiles Used in Children´s Sleepwear
• ASTM D6546 : EN-Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydrualic Fluid Applications
• ASTM D6547 : EN-Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
• ASTM D6548 : EN-Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure)
• ASTM D6549 : EN-Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
• ASTM D6550 : EN-Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
• ASTM D6551 : EN-Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
• ASTM D6551/D6551M : EN-Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
• ASTM D6552 : EN-Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
• ASTM D6553 : EN-Standard Test Method for Coolant Compatibility of Way Lubricants
• ASTM D6554 : EN-Standard Perormance Specification for 100% Cotton Denim Fabrics
• ASTM D6554/D6554M : EN-Standard Specification for 100 % Cotton Denim Fabrics
• ASTM D6555 : EN-Guide for Evaluating System Effects in Repetitive-Member Wood Assembiles
• ASTM D6555 REV A : EN-Guide for Evaluating System Effects in Repetitive-Member Wood Assembiles
• ASTM D6556 : EN-Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
• ASTM D6556 REV A : EN-Standard Test Method for Carbon Black – Total and External Surface Area by Nitrogen Adsorption
• ASTM D6557 : EN-Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
• ASTM D6558 : EN-Standard Test Method for Determination TGA CO Reactivity of Baked Carbon Anodes and Cathode Blocks
• ASTM D6558 REV A : EN-Standard Test Method for Determination TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
• ASTM D6558A : EN-Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
• ASTM D6559 : EN-Standard Test Method for Determination of TGA Air Reactivity of Baked Carbon Anodes and Cathode Blocks
• ASTM D6559 REV A : EN-Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
• ASTM D656 : EN-Standard Specification for Pure Toluidine Red Toner
• ASTM D6560 : EN-Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products-IP 143/01
• ASTM D6561 : EN-Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDI) in Air with (Methoxy-2-Phenyl-1) Piperazine (MOPIP) in the Workplace
• ASTM D6562 : EN-Standard Test Method for Determination of Gaseous Hexamethylene diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA)in the workplace
• ASTM D6563 : EN-Test Method for Benzene Toluene Xylene (BTX) Concentrates Analysis by Capillary Column Gas Chromatography
• ASTM D6564 : EN-Standard Guide for Field Filtration of Ground-Water Samples
• ASTM D6565 : EN-Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
• ASTM D6566 : EN-Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
• ASTM D6567 : EN-Standard Test Method for Measuring the Light Pentration of a Turf Reinforcement Mat (TRM)
• ASTM D6568 : EN-Standard Guide for Planning Carrying Out and Reporting Traceable Chemical Analyses of Water Samples
• ASTM D6569 : EN-Standard Test Method for On-Line Measurement of pH
• ASTM D6570 : EN-Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber
• ASTM D6570 REV A : EN-Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber
• ASTM D6571 : EN-Standard Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading
• ASTM D6572 : EN-Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
• ASTM D6573/D6573M : EN-Standard Specification for General Purpose Wirebound Shipping Boxes
• ASTM D6574 : EN-Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
• ASTM D6575 : EN-Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM’s)
• ASTM D6576 : EN-Standard Specification for Flexible Cellular Rubber Chemically Blown
• ASTM D6577 : EN-Standard Guide for Testing Industrial Protective Coatings
• ASTM D6577 REV A : EN-Standard Guide for Testing Industrial Protective Coatings
• ASTM D6578 : EN-Standard Practice for Determination of Graffiti Resistance
• ASTM D6579 : EN-Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
• ASTM D658 : EN-Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive
• ASTM D6580 : EN-Standard Test Method for the Determination of Metallic Zinc in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
• ASTM D6581 : EN-Standard Test Methods for Bromate Bromide Chlorate and Chlorite in Drinking Water by Suppressed Ion Chromatography
• ASTM D6582 : EN-Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
• ASTM D6583 : EN-Standard Test Method for Porosity of Paint Film
• ASTM D6584 : EN-Test Method for Determination of Free and Total Glycerine in B-100 Biodiesel Methyl Esters by Gas Chromatography
• ASTM D6585 : EN-Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
• ASTM D6586 : EN-Standard Practice for the Prediction of Contaminat Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests
• ASTM D6587 : EN-Standard Test Method for Yarn Number Using Automatic Tester
• ASTM D6588 : EN-Standard Test Method for Fatigue of Tire Cords
• ASTM D6588/D6588M : EN-Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
• ASTM D6588/D6588M REV A : EN-Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
• ASTM D6589 : EN-Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
• ASTM D659 : EN-Standard Method of Evaluating Degree of Chalking of Exterior Paints
• ASTM D6590/D6590M : EN-Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
• ASTM D6591 : EN-Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle DistillatesHigh Performance Liquid Chromatography Method with Refractive Index Detection-IP Designation 548/06
• ASTM D6592 : EN-Standard Test Method for Portable Chemiluminescent Water Quality Determination
• ASTM D6593 : EN-Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature Light-Duty Con
• ASTM D6593 REV A : EN-Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature Light-Duty Con
• ASTM D6594 : EN-Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C
• ASTM D6594 REV A : EN-Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C
• ASTM D6595 : EN-Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
• ASTM D6596 : EN-Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
• ASTM D6597 : EN-Standard Practice for Assessment of Attaining Clean Up Level for Site Closure
• ASTM D6598 : EN-Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
• ASTM D6599 : EN-Standard Practice for Construction of Live Fascines on Slopes
• ASTM D660 : EN-Standard Test Method for Evaluating Degree of Checking of Exterior Paints
• ASTM D6600 : EN-Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
• ASTM D6601 : EN-Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
• ASTM D6602 : EN-Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate or Both
• ASTM D6602 REV A : EN-Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate or Both
• ASTM D6602 REV B : EN-Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate or Both
• ASTM D6603 : EN-Standard Guide for Labeling of UV-Protective Textiles
• ASTM D6604 : EN-Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
• ASTM D6605 : EN-Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
• ASTM D6606 : EN-Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
• ASTM D6607 : EN-Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
• ASTM D6608 : EN-Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
• ASTM D6609 : EN-Standard Guide for Part-Stream Sampling of Coal
• ASTM D661 : EN-Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
• ASTM D6610 : EN-Standard Practice for Manual Sampling of Coal from Stockpiles
• ASTM D6610 REV A : EN-Standard Practice for Manual Sampling Coal from Surfaces of a Stockpiles
• ASTM D6611 : EN-Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
• ASTM D6612 : EN-Standard Test Method for Yarn Number and Yarn Number Variablility Using Automated Tester
• ASTM D6613 : EN-Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric
• ASTM D6614 : EN-Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
• ASTM D6615 : EN-Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
• ASTM D6615 REV A : EN-Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
• ASTM D6616 : EN-Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C
• ASTM D6616 REV A : EN-Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100°C
• ASTM D6617 : EN-Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
• ASTM D6618 : EN-Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
• ASTM D6619 : EN-Standard Practice for Incorporating Pigments by High Speed Dispersion
• ASTM D662 : EN-Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
• ASTM D6620 : EN-Standard Practice for Asbestos Detection Limit Based on Counts
• ASTM D6621 : EN-Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
• ASTM D6622 : EN-Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
• ASTM D6623 : EN-Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography
• ASTM D6624 : EN-Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
• ASTM D6625 : EN-Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
• ASTM D6626 : EN-Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
• ASTM D6627 : EN-Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
• ASTM D6628 : EN-Standard Specification for Color of Pavement Marking Materials
• ASTM D6629 : EN-Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
• ASTM D6630 : EN-Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
• ASTM D6631 : EN-Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
• ASTM D6632 : EN-Standard Test Method for Total Copper in Antilfouling Paints
• ASTM D6633 : EN-Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
• ASTM D6634 : EN-Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
• ASTM D6635 : EN-Standard Test Method for Performing the Flat Plate Dilatometer
• ASTM D6636 : EN-Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
• ASTM D6637 : EN-Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
• ASTM D6638 : EN-Standard Test Method for Determining Connection Strength between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
• ASTM D6639 : EN-Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
• ASTM D664 : EN-STANDARD TEST METHOD FOR NEUTRALIZATION NUMBER BY POTENTIOMETRIC TITRATION
• ASTM D664 REV A : EN-Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration-British Standard 4457; IP Designation: 177/96
• ASTM D6640 : EN-Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
• ASTM D6641 : EN-Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
• ASTM D6641/D6641M : EN-Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
• ASTM D6642 : EN-Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
• ASTM D6643 : EN-Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
• ASTM D6644 : EN-Standard Test Method for Tension Strength of Sew-Through Flange Buttons
• ASTM D6645 : EN-Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
• ASTM D6646 : EN-Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
• ASTM D6647 : EN-Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
• ASTM D6648 : EN-Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
• ASTM D665 : EN-Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water-IP Designation: 135/93; E1-1999
• ASTM D6650 : EN-Standard Test Method for Determining the Dynamic Wiping Efficiency Wet Particle Removal Ability and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
• ASTM D6651 : EN-Standard Test Method for Determining the Rate of Sorption and Sorptive Capacity of Nonwoven Fabrics
• ASTM D6652 : EN-Standard Test Method for Determining Fibrous Debris from Nonwoven Fabrics
• ASTM D6653 : EN-Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
• ASTM D6654 : EN-Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
• ASTM D6655 : EN-Standard Terminology Relating to Mechanical Pump Dispensers
• ASTM D6656 : EN-Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
• ASTM D6657 : EN-Standard Test Method for pH of Wet Blue
• ASTM D6658 : EN-Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
• ASTM D6659 : EN-Standard Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests
• ASTM D6660 : EN-Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
• ASTM D6661 : EN-Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
• ASTM D6662 : EN-Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
• ASTM D6663 : EN-Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
• ASTM D6664 : EN-Standard Specification for Woven Knitted and Flocked Bedspread Products for Institutional and Houshold Use
• ASTM D6665 : EN-Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
• ASTM D6666 : EN-Standard Guide for Evaluation of Aqueous Polymer Quenchants
• ASTM D6666 REV A : EN-Standard Guide for Evaluation of Aqueous Polymer Quenchants
• ASTM D6667 : EN-Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
• ASTM D6668 : EN-Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
• ASTM D6669 : EN-Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
• ASTM D6669 REV A : EN-Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
• ASTM D6670 : EN-Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
• ASTM D6671 : EN-Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
• ASTM D6671/D6671M : EN-Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
• ASTM D6672 : EN-Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines
• ASTM D6673 : EN-Standard Practice for Sewn Products Pattern Data Interchange-Data Format
• ASTM D6674 : EN-Standard Guide for Proficiency Test Programs for Fabrics
• ASTM D6675 : EN-Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
• ASTM D6676 : EN-Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
• ASTM D6677 : EN-Standard Test Method for Evaluating Adhesion by Knife
• ASTM D668 : EN-Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
• ASTM D6681 : EN-Standard Test Method for Evaluation of Engine Oils in a High Speed Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
• ASTM D6682 : EN-Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
• ASTM D6683 : EN-Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids
• ASTM D6684 : EN-Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
• ASTM D6685 : EN-Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
• ASTM D6686 : EN-Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
• ASTM D6687 : EN-Standard Guide for Testing Printing Ink Vehicles and Components Thereof
• ASTM D6688 : EN-Standard Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method
• ASTM D6689 : EN-Standard Guide for Optimizing Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
• ASTM D669 : EN-Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
• ASTM D6690 : EN-Standard Specification for Joint and Crack Sealants Hot Applied for Concrete and Asphalt Pavements
• ASTM D6690 REV A : EN-Standard Specification for Joint and Crack Sealants Hot Applied for Concrete and Asphalt Pavements
• ASTM D6691 : EN-Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium
• ASTM D6692 : EN-Standard Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater
• ASTM D6693 : EN-Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
• ASTM D6694 : EN-Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing
• ASTM D6695 : EN-Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
• ASTM D6695 REV A : EN-Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
• ASTM D6695 REV B : EN-Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
• ASTM D6696 : EN-Standard Guide for Understanding Cyanide Species
• ASTM D6697 : EN-Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water
• ASTM D6698 : EN-Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
• ASTM D6699 : EN-Standard Practice for Sampling Liquids Using Bailers
• ASTM D6700 : EN-Standard Practice for Use of Scrap Tire-Derived Fuel
• ASTM D6701 : EN-Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
• ASTM D6702 : EN-Standard Test Method for Determining the Dynamic Wiping Efficiency of Nonwoven Fabrics Not Used in Cleanrooms
• ASTM D6703 : EN-Standard Test Method for Automated Heithaus Titrimetry
• ASTM D6704 : EN-Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
• ASTM D6705 : EN-Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
• ASTM D6706 : EN-Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
• ASTM D6707 : EN-Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
• ASTM D6708 : EN-Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
• ASTM D6709 : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
• ASTM D6709 REV A : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
• ASTM D671 : EN-Standard Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-Of-Force
• ASTM D6710 : EN-Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
• ASTM D6711 : EN-Standard Practice for Specifying Rock to Fill GabionsRevet Mattresses and Gabion Mattresses
• ASTM D6712 : EN-Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PR) Solid Plastic Shapes
• ASTM D6713 : EN-Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
• ASTM D6714 : EN-Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
• ASTM D6715 : EN-Standard Practice for Sampling and Preparation of Salt Preserved (Cured) Hides and Skins for Chemical and Physical Tests
• ASTM D6716 : EN-Standard Test Method for Total Ash in Wet Blue
• ASTM D6717 : EN-Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
• ASTM D6718 : EN-Standard Practice for Writing Committee D 13 Standards
• ASTM D6719 : EN-Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
• ASTM D6720 : EN-Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
• ASTM D6721 : EN-Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
• ASTM D6722 : EN-Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
• ASTM D6723 : EN-Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
• ASTM D6724 : EN-Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
• ASTM D6725 : EN-Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
• ASTM D6726 : EN-Standard Guide for Conducting Borehole Geophysical LoggingElectromagnetic Induction
• ASTM D6727 : EN-Standard Guide for Conducting Borehole Geophysical Logging-Neutron
• ASTM D6728 : EN-Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
• ASTM D6729 : EN-Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
• ASTM D673 : EN-STANDARD TEST METHOD FOR MAR RESISTANCE OF PLASTICS
• ASTM D673 REV A : EN-Standard Test Method for Mar Resistance of Plastics
• ASTM D6730 : EN-Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
• ASTM D6731 : EN-Standard Test Method for Determining the Aerobic Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
• ASTM D6732 : EN-Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
• ASTM D6733 : EN-Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50 Meter Capillary High Resolution Gas Chromatography
• ASTM D6734 : EN-Standard Test Method for Low Levels of Coliphages in Water
• ASTM D6735 : EN-Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources-Impinger Method
• ASTM D6736 : EN-Standard Test Method for Burnish Resistance of Latex Paints
• ASTM D6737 : EN-Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
• ASTM D6738 : EN-Standard Test Method for Precipitated Silica – Volatile Content
• ASTM D6739 : EN-Standard Test Method for Silica – pH Value
• ASTM D6740 : EN-Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
• ASTM D6741 : EN-Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
• ASTM D6742/D6742M : EN-Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
• ASTM D6743 : EN-Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
• ASTM D6744 : EN-Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
• ASTM D6745 : EN-Standard Test Method for Linear Thermal Expansion of Electrode Carbons
• ASTM D6746 : EN-Standard Test Method for Raw Rubber or Unvulcanized CompoundsDetermination of Tensile Green Strength
• ASTM D6746 REV A : EN-Standard Test Method for Raw Rubber or Unvulcanized CompoundsDetermination of Tensile Green Strength
• ASTM D6747 : EN-Standard Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembrane
• ASTM D6748 : EN-Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
• ASTM D6748 REV A : EN-Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
• ASTM D6749 : EN-Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
• ASTM D6750 : EN-Standard Test Methods for Evaluation of Engine Oils in a High-Speed Single-Cylinder Diesel Engine-1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
• ASTM D6750 REV A : EN-Standard Test Methods for Evaluation of Engine Oils in a High-Speed Single-Cylinder Diesel Engine 1K Procedure (0.4% Fuel Sulfur) and 1N Procedure (0.04% Fuel Sulfur)
• ASTM D6751 : EN-Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
• ASTM D6751 REV A : EN-Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels-***D 5751-06B No Longer Available – D 5751-06A Most Current revision at this time***
• ASTM D6751 REV B : EN-Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels-REMOVED FROM PRODUCT PER ASTM – ASTM D 6751-06A IS NOW CURRENT AGAIN
• ASTM D6752 : EN-Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
• ASTM D6752 REV A : EN-Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
• ASTM D6753 : EN-Standard Specification for Coal Tar Adhesive
• ASTM D6753/D6753M : EN-Standard Specification for Coal Tar Adhesive
• ASTM D6754 : EN-Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
• ASTM D6754/D6754M : EN-Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
• ASTM D6756 : EN-Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
• ASTM D6756 REV A : EN-Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
• ASTM D6757 : EN-Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
• ASTM D6757 REV A : EN-Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
• ASTM D6758 : EN-Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method
• ASTM D6759 : EN-Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
• ASTM D6760 : EN-Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
• ASTM D6761 : EN-Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
• ASTM D6761 REV A : EN-Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
• ASTM D6762 : EN-Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
• ASTM D6762 REV A : EN-Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
• ASTM D6763 : EN-Standard Guide for Testing Exterior Wood Stains
• ASTM D6764 : EN-Standard Guide for Collection of Water Temperature Dissolved-Oxygen Concentrations Specific Electrical Conductance and pH Data from Open Channels
• ASTM D6765 : EN-Standard Practice for Live Staking
• ASTM D6766 : EN-Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
• ASTM D6766 REV A : EN-Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
• ASTM D6767 : EN-Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
• ASTM D6768 : EN-Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
• ASTM D6769 : EN-Standard Guide for Application of Fully Adhered Cold-Applied Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
• ASTM D6769/D6769M : EN-Standard Guide for Application of Fully Adhered Cold-Applied Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
• ASTM D6770 : EN-Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
• ASTM D6771 : EN-Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations
• ASTM D6772 : EN-Standard Test Method for Dimensional Stability of Sandwich Core Materials
• ASTM D6773 : EN-Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
• ASTM D6774 : EN-Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
• ASTM D6775 : EN-Standard Test Method for Breaking Strength and Elongation of Textile Webbing Tape and Braided Material
• ASTM D6776 : EN-Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment
• ASTM D6777 : EN-Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
• ASTM D6778 : EN-Standard Classification for Polyoxymethylene (POM Acetal) Molding and Extrusion Materials
• ASTM D6779 : EN-Standard Classification System for Polyamide Molding and Extrusion Materials (PA)
• ASTM D6779 REV A : EN-Standard Classification System for Polyamide Molding and Extrusion Materials (PA)
• ASTM D6780 : EN-Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
• ASTM D6781 : EN-Standard Guide for Carbon Reactivation
• ASTM D6782 : EN-Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
• ASTM D6783 : EN-Standard Specification for Polymer Concrete Pipe
• ASTM D6784 : EN-Standard Test Method for Elemental Oxidized Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
• ASTM D6785 : EN-Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
• ASTM D6786 : EN-Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
• ASTM D6787 : EN-Standard Specification for Repositionable Note Pad
• ASTM D6788 : EN-Standard Specification for Repositionable Pressure-Sensitive Flags
• ASTM D6789 : EN-Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus
• ASTM D6790 : EN-Standard Test Method for Determining Poisson’s Ratio of Honeycomb Cores
• ASTM D6791 : EN-Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
• ASTM D6792 : EN-Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
• ASTM D6792 REV A : EN-Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
• ASTM D6793 : EN-Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
• ASTM D6794 : EN-Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
• ASTM D6795 : EN-Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time
• ASTM D6796 : EN-Standard Practice for Production of Coal Coke and Coal Combustion Samples for Interlaboratory Studies
• ASTM D6797 : EN-Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
• ASTM D6798 : EN-Standard Terminology Relating to Flax and Linen
• ASTM D6799 : EN-Standard Terminology Relating to Inflatable Restraints-***Publication Released August 2006***
• ASTM D6800 : EN-Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
• ASTM D6801 : EN-Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art Materials
• ASTM D6801 REV A : EN-Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art Materials
• ASTM D6802 : EN-Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
• ASTM D6803 : EN-Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
• ASTM D6804 : EN-Standard Guide for Hand Hole Design in Corrugated Boxes
• ASTM D6805 : EN-Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
• ASTM D6806 : EN-Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
• ASTM D6807 : EN-Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from 2 to 100 S/cm1
• ASTM D6808 : EN-Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
• ASTM D6809 : EN-Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
• ASTM D681 : EN-Standard Specification for Jute Rove and Plied Yarn for Electrical and Packing Purposes
• ASTM D6810 : EN-Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
• ASTM D6811 : EN-Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)-IP Designation: 482/02
• ASTM D6812 : EN-Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
• ASTM D6812 REV A : EN-Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/ Supercharged Spark Ignition Aircraft Engines
• ASTM D6813 : EN-Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
• ASTM D6813 REV A : EN-Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps
• ASTM D6814 : EN-Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
• ASTM D6815 : EN-Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
• ASTM D6815 REV A : EN-Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
• ASTM D6816 : EN-Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
• ASTM D6817 : EN-Standard Specification for Rigid Cellular Polystyrene Geofoam
• ASTM D6817 REV A : EN-Standard Specification for Rigid Cellular Polystyrene Geofoam
• ASTM D6818 : EN-Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats
• ASTM D6819 : EN-Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
• ASTM D6820 : EN-Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
• ASTM D6821 : EN-Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
• ASTM D6822 : EN-Standard Test Method for Density Relative Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method-Designation: Manual of Petroleum Measurement Standards (MPMS) Chapter 9
• ASTM D6823 : EN-Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
• ASTM D6824 : EN-Standard Test Method for Determining Filterability of Aviation Turbine Fuel
• ASTM D6825 : EN-Standard Guide for Placement of Riprap Revetments
• ASTM D6826 : EN-Standard Specification for Sprayed Slurries Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
• ASTM D6826 REV A : EN-Standard Specification for Sprayed Slurries Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
• ASTM D6827 : EN-Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
• ASTM D6828 : EN-Standard Test Method for Stiffness of Fabric by the Blade/Slot Procedure
• ASTM D6829 : EN-Standard Tables of Body Measurements for Juniors Sizes 0 to 19
• ASTM D6830 : EN-Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
• ASTM D6831 : EN-Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack Inertial Microbalance
• ASTM D6831 REV A : EN-Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack Inertial Microbalance
• ASTM D6832 : EN-Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrometric Measurement Using 15-diphenylcarbazide
• ASTM D6833 : EN-Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper By Pollution Chamber Exposure Apparatus
• ASTM D6834 : EN-Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
• ASTM D6835 : EN-Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
• ASTM D6836 : EN-Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using Hanging Column Pressure Extractor Chilled Mirror Hygrometer and/or Centrifuge
• ASTM D6837 : EN-Standard Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIB Spark Ignition Engine
• ASTM D6837 REV A : EN-Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
• ASTM D6838 : EN-Standard Test Method for Cummins M11 High Soot Test
• ASTM D6839 : EN-Standard Test Method for Hydrocarbon Types Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
• ASTM D6840 : EN-Standard Test Method for Effect of Drycleaning on Buttons
• ASTM D6841 : EN-Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
• ASTM D6842 : EN-Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
• ASTM D6843 : EN-Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
• ASTM D6844 : EN-Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
• ASTM D6845 : EN-Standard Test Methods for Silica Precipitated Hydrated-CTAB (Cetyltrimethylammonium Bromide) Surface Area
• ASTM D6846 : EN-Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
• ASTM D6847 : EN-Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
• ASTM D6848 : EN-Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing
• ASTM D6849 : EN-Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
• ASTM D685 : EN-Standard Practice for Conditioning Paper and Paper Products for Testing-TAPPI T 402
• ASTM D685 REV A : EN-STANDARD METHOD FOR CONDITIONING PAPER AND PAPER PRODUCTS (TECHNICAL ASSOCIATION OF PULP AND PAPER INDUSTRY STANDARD METHOD T 402)
• ASTM D6850 : EN-Standard Guide for QC of Screening Methods in Water
• ASTM D6851 : EN-Standard Test Method for Determination of Contact pH with Activated Carbon
• ASTM D6852 : EN-Standard Guide for Determination of Biobased Content Resources Consumption and Environmental Profile of Materials and Products
• ASTM D6854 : EN-Standard Test Method for Silica-n-Dibutyl Phthalate Absorption Number
• ASTM D6855 : EN-Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
• ASTM D6856 : EN-Standard Guide for Testing Fabric-Reinforced -Textile- Composite Materials
• ASTM D6857 : EN-Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
• ASTM D6859 : EN-Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
• ASTM D686 : EN-Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper
• ASTM D6860 : EN-Proposed Standard Tables of Body Measurements for Boys Sizes 6 to 24 Husky
• ASTM D6860/D6860M : EN-Standard Tables of Body Measurements for Boys Sizes 6 to 24 Husky
• ASTM D6862 : EN-Standard Test Method for 90 Degree Peel Resistance of Adhesives
• ASTM D6864 : EN-Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
• ASTM D6864 REV A : EN-Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
• ASTM D6865 : EN-Standard Classification System for Acrylonitrile Styrene Acrylate (ASA) and Acrylonitrile EPDM Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
• ASTM D6866 : EN-Standard Test Methods for Determining the Biobased Content of Solid Liquid and Gaseous Samples Using Radiocarbon Analysis
• ASTM D6866 REV A : EN-Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
• ASTM D6867 : EN-Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
• ASTM D6868 : EN-Standard Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
• ASTM D6869 : EN-Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
• ASTM D6871 : EN-Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
• ASTM D6873 : EN-Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
• ASTM D6873/D6873M : EN-Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
• ASTM D6874 : EN-Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
• ASTM D6875 : EN-Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
• ASTM D6877 : EN-Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
• ASTM D6878 : EN-Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
• ASTM D6878 REV A : EN-Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
• ASTM D6880 : EN-Standard Specification for Wood Boxes
• ASTM D6881 : EN-Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
• ASTM D6881/D6881M : EN-Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
• ASTM D6883 : EN-Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars Barges Trucks or Stockpiles-Replaces D 4915
• ASTM D6883 REV A : EN-Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars Barges Trucks or Stockpiles
• ASTM D6886 : EN-Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
• ASTM D6887 : EN-Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
• ASTM D6888 : EN-Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM D6889 : EN-Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
• ASTM D689 : EN-STANDARD TEST METHOD FOR INTERNAL TEARING RESISTANCE OF PAPER
• ASTM D689 REV A : EN-Standard Test Method for Internal Tearing Resistance of Paper
• ASTM D6890 : EN-Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
• ASTM D6890 REV A : EN-Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
• ASTM D6890 REV B : EN-Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
• ASTM D6891 : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
• ASTM D6891 REV A : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
• ASTM D6892 : EN-Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
• ASTM D6894 : EN-Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
• ASTM D6895 : EN-Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C
• ASTM D6896 : EN-Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
• ASTM D6897 : EN-Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
• ASTM D6897 REV A : EN-Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
• ASTM D6898 : EN-Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
• ASTM D6899 : EN-Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel
• ASTM D69 : EN-Standard Test Methods for Friction Tapes
• ASTM D6900 : EN-Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
• ASTM D6901 : EN-Standard Specification for Artists- Colored Pencils
• ASTM D6902 : EN-Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
• ASTM D6903 : EN-Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
• ASTM D6904 : EN-Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
• ASTM D6905 : EN-Standard Test Method for Impact Flexibility of Organic Coatings
• ASTM D6906 : EN-Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
• ASTM D6907 : EN-Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
• ASTM D6908 : EN-Standard Practice for Integrity Testing of Water Filtration Membrane Systems
• ASTM D6909 : EN-Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
• ASTM D6910 : EN-Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
• ASTM D6910/D6910M : EN-Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
• ASTM D6911 : EN-Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
• ASTM D6913 : EN-Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D6914 : EN-Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
• ASTM D6915 : EN-Standard Practice for Carbon BlackEvaluation of Standard Reference Blacks
• ASTM D6915 REV A : EN-Standard Practice for Carbon BlackEvaluation of Standard Reference Blacks
• ASTM D6915 REV B : EN-Standard Practice for Carbon BlackEvaluation of Standard Reference Blacks
• ASTM D6916 : EN-Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
• ASTM D6916 REV A : EN-Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
• ASTM D6916 REV B : EN-Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
• ASTM D6916 REV C : EN-Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
• ASTM D6917 : EN-Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
• ASTM D6918 : EN-Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
• ASTM D6919 : EN-Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
• ASTM D692 : EN-STANDARD SPECIFICATION FOR COARSE AGGREGATE FOR BITUMINOUS PAVING MIXTURES
• ASTM D692 REV A : EN-Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
• ASTM D692/D692M : EN-Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
• ASTM D6920 : EN-Standard Test Method for Total Sulfur in Naphthas Distillates Reformulated Gasolines Diesels Biodiesels and Motor Fuels by Oxidative Combustion and Electrochemical Detection
• ASTM D6922 : EN-Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
• ASTM D6923 : EN-Standard Test Method for Evaluation of Engine Oils in a High Speed Single-Cylinder Diesel Engine-Caterpillar 1R Test Procedure
• ASTM D6924 : EN-Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
• ASTM D6925 : EN-Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
• ASTM D6926 : EN-Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
• ASTM D6927 : EN-Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
• ASTM D6928 : EN-Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
• ASTM D6929 : EN-Standard Practice for Freezing of Emulsified Asphalts
• ASTM D693 : EN-Standard Specification for Crushed Aggregate for Macadam Pavements
• ASTM D693 REV A : EN-Standard Specification for Crushed Aggregate for Macadam Pavements
• ASTM D6930 : EN-Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
• ASTM D6931 : EN-Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
• ASTM D6932 : EN-Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
• ASTM D6932/D6932M : EN-Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
• ASTM D6933 : EN-Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
• ASTM D6934 : EN-Standard Test Method for Residue by Evaporation of Emulsified Asphalt
• ASTM D6935 : EN-Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
• ASTM D6936 : EN-Standard Test Method for Determining Demulsibility of Emulsified Asphalt
• ASTM D6937 : EN-Standard Test Method for Determining Density of Emulsified Asphalt
• ASTM D6938 : EN-Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
• ASTM D6938 REV A : EN-Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
• ASTM D6939 : EN-Standard Practice for Brushmattressing
• ASTM D6940 : EN-Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
• ASTM D6941 : EN-Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
• ASTM D6942 : EN-Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
• ASTM D6943 : EN-Standard Practice for Immersion Testing of Industrial Protective Coatings
• ASTM D6944 : EN-Standard Test Method for Resistance of Cured Coatings to Thermal Cycling
• ASTM D6945 : EN-Standard Specification for Emulsified Refined Coal-Tar (Ready to Use Commercial Grade)
• ASTM D6946 : EN-Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer Ready to Use Primarily Residential Grade)
• ASTM D6947 : EN-Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
• ASTM D6948 : EN-Standard Practice for Application of Refined Coal Tar (Ready to Use Commercial Grade)
• ASTM D695 : EN-Standard Test Method for Compressive Properties of Rigid Plastics
• ASTM D695 REV A : EN-Standard Test Method for Compressive Properties of Rigid Plastics
• ASTM D6950 : EN-Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
• ASTM D6951 : EN-Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
• ASTM D6951/D6951M : EN-Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
• ASTM D6953 : EN-Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
• ASTM D6954 : EN-Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
• ASTM D6956 : EN-Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
• ASTM D6957 : EN-Standard Practice for Measuring Curl in Paint Brush Filling Material
• ASTM D6958 : EN-Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
• ASTM D6959 : EN-Standard Practice for Data Exchange Format for Sewn Product Plotting Devices
• ASTM D695M : EN-Standard Test Method for Compressive Properties of Rigid Plastics (Metric)
• ASTM D696 : EN-Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C with a Vitreous Silica Dilatometer
• ASTM D6960 : EN-Standard Table of Body Measurements Relating to Women s Plus Size Figure Type Sizes 14W 32W
• ASTM D6961 : EN-Standard Test Method for Color Measurement of Flax Fiber
• ASTM D6961/D6961M : EN-Standard Test Method for Color Measurement of Flax Fiber
• ASTM D6962 : EN-Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
• ASTM D6963 : EN-Standard Terminology Relating to Sewn Products Automation
• ASTM D6966 : EN-Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
• ASTM D6968 : EN-Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
• ASTM D6969 : EN-Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
• ASTM D6970 : EN-Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
• ASTM D6971 : EN-Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
• ASTM D6973 : EN-Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
• ASTM D6974 : EN-Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels-Filtration and Culture Procedures
• ASTM D6975 : EN-Standard Test Method for Cummins M11 EGR Test1
• ASTM D6976 : EN-Standard Specification for Rubber Contraceptives-Vaginal Diaphragms
• ASTM D6977 : EN-Standard Specification for Polychloroprene Examination Gloves for Medical Application
• ASTM D6978 : EN-Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
• ASTM D6979 : EN-Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols Expressed as Percent Nitrogen
• ASTM D698 : EN-Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (12400 ft-lbf/ft3 (600 kN-m/m3))
• ASTM D698 REV A : EN-Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12400 ft-lbf/ft3 (600 kN-m/m3))
• ASTM D6980 : EN-Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
• ASTM D6982 : EN-Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
• ASTM D6984 : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF Spark-Ignition Engine
• ASTM D6984 REV A : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF Spark-Ignition Engine
• ASTM D6985 : EN-Standard Specification for Middle Distillate Fuel OilMilitary Marine Applications
• ASTM D6985 REV A : EN-Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications
• ASTM D6986 : EN-Standard Test Method for Free Water Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
• ASTM D6987 : EN-Standard Test Method for Evaluation of Diesel Engine Oils in the T-10 Exhaust Gas Recirculation Diesel Engine
• ASTM D6987/D6987M : EN-Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
• ASTM D6987/D6987M REV A : EN-Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
• ASTM D6988 : EN-Standard Guide for Determination of Thickness of Plastic Film Test Specimens
• ASTM D6989 : EN-Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
• ASTM D6990 : EN-Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
• ASTM D6991 : EN-Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
• ASTM D6992 : EN-Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
• ASTM D6994 : EN-Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater Surface Water Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
• ASTM D6995 : EN-Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
• ASTM D6997 : EN-Standard Test Method for Distillation of Emulsified Asphalt
• ASTM D6998 : EN-Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
• ASTM D6999 : EN-Standard Practice for Miscibility of Emulsified Asphalts
• ASTM D70 : EN-Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials
• ASTM D700 : EN-STANDARD SPECIFICATION FOR PHENOLIC MOLDING COMPOUNDS
• ASTM D7000 : EN-Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
• ASTM D7001 : EN-Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
• ASTM D7002 : EN-Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System

ASTM A , ASTM B ,  ASTM C ,  ASTM D | 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 | , ASTM E , ASTM F , ASTM G