STD-ASTM D XXXX Conti 2

아래 ASTM (American Society for Testing and Materials) 규격 목록은 규격번호와 제목을 발췌, 열거한 것입니다.
[출처 : www.astm.org ]

ASTM A , ASTM B ,  ASTM C ,  ASTM D 1 || 2 || 3 || 4 |5 |6 || 7 |8 | , ASTM E ASTM F , ASTM G

  • ASTM D1977 : EN-Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
  • ASTM D1978 : EN-Standard Guide for Analysis of Electrocoat Bath Samples
  • ASTM D1979 : EN-Standard Test Method for Free Formaldehyde Content of Amino Resins
  • ASTM D198 : EN-Standard Test Methods of Static Tests of Lumber in Structural Sizes
  • ASTM D198 REV A : EN-Standard Test Methods of Static Tests of Lumber in Structural Sizes
  • ASTM D1980 : EN-Standard Test Method for Acid Value of Fatty Acids and Polymerized Fatty Acids
  • ASTM D1981 : EN-Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
  • ASTM D1982 : EN-Standard Test Method for Titer of Fatty Acids
  • ASTM D1983 : EN-Standard Test Method for Fatty Acid Composition by Gas-Liquid Chromatography of Methyl Esters
  • ASTM D1984 : EN-Standard Specification for Tall Oil Fatty Acids
  • ASTM D1985 : EN-Standard Practice for Preparing Concrete Blocks for Testing Sealants for Joints and Cracks
  • ASTM D1986 : EN-Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • ASTM D1987 : EN-Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
  • ASTM D1988 : EN-Standard Test Method for Mercaptans in Natural Gas Using Length-Of-Stain Detector Tubes
  • ASTM D1989 : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY MICROPROCESSOR CONTROLLED ISOPERIBOL CALORIMETERS
  • ASTM D1989 REV A : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY MICROPROCESSOR CONTROLLED ISOPERIBOL CALORIMETERS
  • ASTM D1990 : EN-Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
  • ASTM D1990 REV A : EN-Standard Practice for Establishing Allowable Properties for Visually- Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
  • ASTM D1991 : EN-Standard Test Method for Rubber Chemicals – 2- Mercaptobenzothiazole (MBT) – Assay
  • ASTM D1992 : EN-Standard Guide for Testing Synthetic Plasticizers Used in Rubber
  • ASTM D1993 : EN-Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
  • ASTM D1994 : EN-Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
  • ASTM D1995 : EN-Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
  • ASTM D1996 : EN-Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
  • ASTM D1997 : EN-Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
  • ASTM D1998 : EN-Standard Specification for Polyethylene Upright Storage Tanks
  • ASTM D1999 : EN-STANDARD GUIDE FOR THE SELECTION OF SPECIMENS AND TEST PARAMETERS FOR INTERNATIONAL COMMERCE
  • ASTM D1999 REV A : EN-Standard Guide for Selection of Specimens and Test Parameters from ISO/IEC Standards
  • ASTM D20 : EN-Standard Test Method for Distillation of Road Tars
  • ASTM D2000 : EN-Standard Classification System for Rubber Products in Automotive Applications-SAE J200
  • ASTM D2000 REV A : EN-Standard Classification System for Rubber Products in Automotive Applications-SAE J200
  • ASTM D2000 REV C : EN-Standard Classification System for Rubber Products in Automotive Applications-SAE J200
  • ASTM D2001 : EN-Standard Test Method for Depentanization of Gasoline and Naphthas
  • ASTM D2002 : EN-Standard Practice for Isolation of Representative Saturates Fraction from Low-Olefinic Petroleum Naphthas
  • ASTM D2003 : EN-STANDARD METHOD FOR ISOLATION OF REPRESENTATIVE SATURATES FRACTION FROM HIGH-OLEFINIC PETROLEUM NAPHTHAS
  • ASTM D2005 : EN-STANDARD TEST METHOD FOR SEALING STRENGTH OF PETROLEUM WAX
  • ASTM D2006 : EN-Tentative Method of Test for Characreistic Groups in Rubber Extender and Processing Oils by the Precipitaion Method
  • ASTM D2007 : EN-Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  • ASTM D2007 REV A : EN-Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  • ASTM D2008 : EN-Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2009 : EN-Standard Practice for Collection by Filtration and Determination of Mass Number and Optical Sizing of Atmospheric Particulates
  • ASTM D2010 : EN-STANDARD TEST METHOD FOR EVALUATION OF TOTAL SULFATION ACTIVITY IN THE ATMOSPHERE BY THE LEAD DIOXIDE CANDLE (R 1990)
  • ASTM D2010/D2010M : EN-Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
  • ASTM D2013 : EN-Standard Practice for Preparing Coal Samples for Analysis
  • ASTM D2013 REV A : EN-Standard Practice for Preparing Coal Samples for Analysis
  • ASTM D2013/D2013M : EN-Standard Practice for Preparing Coal Samples for Analysis
  • ASTM D2014 : EN-Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM D2014 REV A : EN-Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • ASTM D2015 : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY THE ADIABATIC BOMB CALORIMETER
  • ASTM D2015 REV A : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY THE ADIABATIC BOMB CALORIMETER
  • ASTM D2015 REV B : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY THE ADIABATIC BOMB CALORIMETER
  • ASTM D2016 : EN-STANDARD TEST METHODS FOR MOISTURE CONTENT OF WOOD (R 1983)
  • ASTM D2017 : EN-Standard Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods-(Withdrawn 2002; No Replacement)
  • ASTM D2019 : EN-Standard Test Method for Dirt in Paper and Paperboard
  • ASTM D202 : EN-STANDARD METHODS FOR SAMPLING AND TESTING UNTREATED PAPER USED FOR ELECTRICAL INSULATION
  • ASTM D2020 : EN-Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
  • ASTM D2021 : EN-Standard Specification for Neutral Detergent 40 Percent Alkylbenzene Sulfonate Type
  • ASTM D2022 : EN-STANDARD METHODS OF SAMPLING AND CHEMICAL ANALYSIS OF CHLORINE-CONTAINING BLEACHES
  • ASTM D2023 : EN-STANDARD METHOD OF ANALYSIS FOR SODIUM TOLUENE SULFONATE IN DETERGENTS
  • ASTM D2024 : EN-Standard Test Method for Cloud Point of Nonionic Surfactants
  • ASTM D2026 : EN-Standard Specification for Cutback Asphalt (Slow-Curing Type)
  • ASTM D2026/D2026M : EN-Standard Specification for Cutback Asphalt (Slow-Curing Type)
  • ASTM D2027 : EN-Standard Specification for Cutback Asphalt (Medium-Curing Type)
  • ASTM D2027/D2027M : EN-Standard Specification for Cutback Asphalt (Medium-Curing Type)
  • ASTM D2028 : EN-Standard Specification for Cutback Asphalt (Rapid-Curing Type)
  • ASTM D2028/D2028M : EN-Standard Specification for Cutback Asphalt (Rapid-Curing Type)
  • ASTM D2029 : EN-Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • ASTM D2030 : EN-Standard Test Method for Water Solubility of Refined Pyridine
  • ASTM D2031 : EN-Standard Test Method for Reducing Substances in Refined Pyridine
  • ASTM D2032 : EN-STANDARD SPECIFICATION FOR DEUTERIUM OXIDE
  • ASTM D2033 : EN-STANDARD TEST METHOD FOR CONSUMPTION OF POTASSIUM PERMANGANATE BY IMPURITIES IN DEUTERIUM OXIDE
  • ASTM D2035 : EN-Standard Practice for Coagulation-Flocculation Jar Test of Water
  • ASTM D2036 : EN-Standard Test Methods for Cyanides in Water
  • ASTM D2038 : EN-STANDARD TEST METHOD FOR RADIOACTIVE BARIUM IN WATER
  • ASTM D2039 : EN-STANDARD TEST METHOD FOR RADIOACTIVE MANGANESE IN WATER
  • ASTM D204 : EN-Standard Test Methods for Sewing Threads
  • ASTM D2041 : EN-STANDARD TEST METHOD FOR THEORETICAL MAXIMUM SPECIFIC GRAVITY AND DENSITY OF BITUMINOUS PAVING MIXTURES (E1-1994)
  • ASTM D2041 REV A : EN-Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
  • ASTM D2042 : EN-Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
  • ASTM D2043 : EN-Standard Test Method for Silver Tarnishing by Paper
  • ASTM D2044 : EN-MOISTURE IN PAPER AND PAPERBOARD BY TOLUENE DISTILLATIONl
  • ASTM D2047 : EN-STANDARD TEST METHOD FOR STATIC COEFFICIENT OF FRICTION OF POLISH- COATED FLOOR SURFACES AS MEASURED BY THE JAMES MACHINE (R 1988)
  • ASTM D2048 : EN-Standard Test Method for Powdering of Floor Polish Films
  • ASTM D2050 : EN-Standard Terminology Relating to Zippers
  • ASTM D2051 : EN-Standard Test Method for Durability of Finish of Zippers to Laundering
  • ASTM D2052 : EN-Standard Test Method for Colorfastness of Zippers to Drycleaning
  • ASTM D2053 : EN-Standard Test Method for Colorfastness of Zippers to Light
  • ASTM D2054 : EN-STANDARD TEST METHOD FOR COLORFASTNESS OF ZIPPER TAPES TO CROCKING
  • ASTM D2057 : EN-Standard Test Method for Colorfastness of Zippers to Laundering
  • ASTM D2058 : EN-Standard Test Method for Durability of Finish of Zippers to Drycleaning
  • ASTM D2058 REV A : EN-STANDARD TEST METHOD FOR DURABILITY OF FINISH OF ZIPPERS TO DRYCLEANING
  • ASTM D2059 : EN-Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
  • ASTM D2059/D2059M : EN-Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
  • ASTM D206 : EN-STANDARD ABRIDGED VOLUME CORRECTION TABLE FOR PETROLEUM OILS
  • ASTM D2060 : EN-STANDARD METHODS FOR MEASURING ZIPPER DIMENSIONS
  • ASTM D2061 : EN-Standard Test Methods for Strength Tests for Zippers
  • ASTM D2062 : EN-Standard Test Methods for Operability of Zippers
  • ASTM D2063 : EN-Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
  • ASTM D2063/D2063M : EN-Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
  • ASTM D2064 : EN-Standard Test Method for Print Resistance of Architectural Paints
  • ASTM D2065 : EN-Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
  • ASTM D2066 : EN-Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
  • ASTM D2067 : EN-Standard Test Method for Coarse Particles in Printing Ink Dispersions
  • ASTM D2068 : EN-Standard Test Method for Filter Plugging Tendency of Distillate Fuel Oils
  • ASTM D2069 : EN-Standard Specification for Marine Fuels
  • ASTM D207 : EN-Standard Specification for Dry Bleached Lac
  • ASTM D2070 : EN-Standard Test Method for Thermal Stability of Hydraulic Oils
  • ASTM D2071 : EN-Standard Test Methods for Fatty Nitrogen Products
  • ASTM D2072 : EN-STANDARD TEST METHOD FOR WATER IN FATTY NITROGEN COMPOUNDS (R 1987)
  • ASTM D2073 : EN-Standard Test Methods for Total Primary Secondary and Tertiary Amine Values of Fatty Amines Amidoamines and Diamines by Referee Potentiometric Method
  • ASTM D2074 : EN-Standard Test Methods for Total Primary Secondary and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
  • ASTM D2075 : EN-STANDARD TEST METHOD FOR IODINE VALUE OF FATTY AMINES AMIDOAMINES AND DIAMINES (R 1981) (E1 1982)
  • ASTM D2076 : EN-STANDARD TEST METHODS FOR ACID VALUE AND AMINE VALUE OF FATTY QUATERNARY AMMONIUM CHLORIDES (R 1987)
  • ASTM D2077 : EN-STANDARD TEST METHOD FOR ASH IN FATTY QUATERNARY AMMONIUM CHLORIDES (R 1987)
  • ASTM D2078 : EN-STANDARD TEST METHOD FOR IODINE VALUE OF FATTY QUATERNARY AMMONIUM CHLORIDES
  • ASTM D2079 : EN-Standard Test Method for Nonvolatile Matter (Solids) in Fatty Quaternary Ammonium Chlorides
  • ASTM D2080 : EN-STANDARD TEST METHOD FOR AVERAGE MOLECULAR WEIGHT OF FATTY QUATERNARY AMMONIUM CHLORIDES (R 1987)
  • ASTM D2081 : EN-Standard Test Method for pH of Fatty Quaternary Ammonium Chlorides
  • ASTM D2082 : EN-STANDARD TEST METHOD FOR PERCENT OF NON-AMINES IN FATTY NITROGEN COMPOUNDS (R 1987)
  • ASTM D2083 : EN-STANDARD TEST METHOD FOR CALCULATION OF PERCENT OF PRIMARY SECONDARY AND TERTIARY AMINES IN FATTY AMINES (R 1987)
  • ASTM D2084 : EN-Standard Test Method for Rubber Property – Vulcanization Using Oscillating Disk Cure Meter
  • ASTM D2084 REV A : EN-STANDARD TEST METHOD FOR RUBBER PROPERTY – VULCANIZATION USING OSCILLATING DISK CURE METER
  • ASTM D2085 : EN-Standard Test Method for Determining Chloride Used in Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method)
  • ASTM D2086 : EN-Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
  • ASTM D2087 : EN-Standard Test Method for Iron in Formaldehyde Solutions
  • ASTM D2088 : EN-Standard Test Method for Determination of Low Concentrations of Lead in Paint
  • ASTM D209 : EN-Standard Specification for Lampblack Pigment
  • ASTM D2090 : EN-Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids
  • ASTM D2091 : EN-STANDARD TEST METHOD FOR PRINT RESISTANCE OF LACQUERS
  • ASTM D2092 : EN-STANDARD PRACTICE FOR PREPARATION OF ZINC- COATED (GALVANIZED) STEEL SURFACES FOR PAINTING (R 1993)
  • ASTM D2093 : EN-Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
  • ASTM D2094 : EN-Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
  • ASTM D2095 : EN-Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
  • ASTM D2096 : EN-Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
  • ASTM D2097 : EN-STANDARD METHOD OF FLEX TESTING OF FINISH ON UPHOLSTERY LEATHER (R 1991)
  • ASTM D2098 : EN-Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
  • ASTM D2099 : EN-STANDARD TEST METHOD FOR DYNAMIC WATER RESISTANCE OF SHOE UPPER LEATHER BY THE MAESER WATER PENETRATION TESTER
  • ASTM D210 : EN-Standard Specification for Bone Black Pigment
  • ASTM D210 REV A : EN-Standard Specification for Bone Black Pigment
  • ASTM D2100 : EN-Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
  • ASTM D2100/D2100M : EN-Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
  • ASTM D2101 : EN-STANDARD TEST METHODS FOR TENSILE PROPERTIES OF SINGLE MAN-MADE TEXTILE FIBERS TAKEN FROM YARNS AND TOWS
  • ASTM D2102 : EN-STANDARD TEST METHOD FOR SHRINKAGE OF TEXTILE FIBERS
  • ASTM D2103 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE FILM AND SHEETING
  • ASTM D2104 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULE 40
  • ASTM D2104 REV A : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULE 40
  • ASTM D2105 : EN-STANDARD TEST METHOD FOR LONGITUDINAL TENSILE PROPERTIES OF REINFORCED THERMOSETTING RESIN PIPE AND TUBE
  • ASTM D2106 : EN-Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • ASTM D2108 : EN-Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
  • ASTM D2109 : EN-Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
  • ASTM D211 : EN-Standard Specification for Chrome Yellow and Chrome Orange Pigments
  • ASTM D2110 : EN-Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
  • ASTM D2111 : EN-Standard Test Methods for Specific Gravity of Halogenated Organic Solvents and Their Admixtures
  • ASTM D2112 : EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF INHIBITED MINERAL INSULATING OIL BY ROTATING BOMB
  • ASTM D2112 REV A : EN-Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
  • ASTM D2113 : EN-Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
  • ASTM D2115 : EN-Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
  • ASTM D2116 : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON MOLDING AND EXTRUSION MATERIALS
  • ASTM D2116 REV A : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON MOLDING AND EXTRUSION MATERIALS
  • ASTM D2117 : EN-Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method
  • ASTM D2118 : EN-Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its’ Products
  • ASTM D2119 : EN-STANDARD TEST METHOD FOR ALDEHYDES IN STYRENE MONOMER
  • ASTM D212 : EN-STANDARD SPECIFICATION FOR PURE CHROME GREEN
  • ASTM D2120 : EN-STANDARD TEST METHOD FOR INHIBITOR P-TERT-BUTYLCATECHOL IN STYRENE MONOMER
  • ASTM D2121 : EN-Standard Test Methods for Polymer Content of Styrene Monomer and Alpha-Methylstyrene
  • ASTM D2122 : EN-Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
  • ASTM D2123 : EN-STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE-VINYL ACETATE) PLASTIC SHEET
  • ASTM D2124 : EN-Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2126 : EN-STANDARD TEST METHOD FOR RESPONSE OF RIGID CELLULAR PLASTICS TO THERMAL AND HUMID AGING
  • ASTM D2128 : EN-STANDARD SPECIFICATION FOR RUBBERIZED CURLED HAIR
  • ASTM D2129 : EN-Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
  • ASTM D2130 : EN-Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
  • ASTM D2131 : EN-Standard Classification for Natural Muscovite Mica Splittings
  • ASTM D2112 : EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF INHIBITED MINERAL INSULATING OIL BY ROTATING BOMB
  • ASTM D2112 REV A : EN-Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
  • ASTM D2113 : EN-Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
  • ASTM D2115 : EN-Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
  • ASTM D2116 : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON MOLDING AND EXTRUSION MATERIALS
  • ASTM D2116 REV A : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON MOLDING AND EXTRUSION MATERIALS
  • ASTM D2117 : EN-Standard Test Method for Melting Point of Semicrystalline Polymers by the Hot Stage Microscopy Method
  • ASTM D2118 : EN-Standard Practice for Assigning a Standard Commercial Moisture Content for Wool and its’ Products
  • ASTM D2119 : EN-STANDARD TEST METHOD FOR ALDEHYDES IN STYRENE MONOMER
  • ASTM D212 : EN-STANDARD SPECIFICATION FOR PURE CHROME GREEN
  • ASTM D2120 : EN-STANDARD TEST METHOD FOR INHIBITOR P-TERT-BUTYLCATECHOL IN STYRENE MONOMER
  • ASTM D2121 : EN-Standard Test Methods for Polymer Content of Styrene Monomer and Alpha-Methylstyrene
  • ASTM D2122 : EN-Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
  • ASTM D2123 : EN-STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE-VINYL ACETATE) PLASTIC SHEET
  • ASTM D2124 : EN-Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2126 : EN-STANDARD TEST METHOD FOR RESPONSE OF RIGID CELLULAR PLASTICS TO THERMAL AND HUMID AGING
  • ASTM D2128 : EN-STANDARD SPECIFICATION FOR RUBBERIZED CURLED HAIR
  • ASTM D2129 : EN-Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
  • ASTM D2130 : EN-Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
  • ASTM D2131 : EN-Standard Classification for Natural Muscovite Mica Splittings
  • ASTM D2132 : EN-Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
  • ASTM D2133 : EN-STANDARD SPECIFICATION FOR ACETAL RESIN INJECTION MOLDING AND EXTRUSION MATERIALS
  • ASTM D2134 : EN-Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
  • ASTM D2135 : EN-STANDARD CLASSIFICATION OF HARD RUBBERS
  • ASTM D2136 : EN-Standard Test Method for Coated Fabrics – Low-Temperature Bend Test
  • ASTM D2137 : EN-Standard Test Methods for Rubber Property – Brittleness Point of Flexible Polymers and Coated Fabrics
  • ASTM D2138 : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – ADHESION TO TEXTILE CORD
  • ASTM D2140 : EN-CARBON-TYPE COMPOSITION OF INSULATING OILS OF PETROLEUM ORIGIN TEST METHOD FOR
  • ASTM D2143 : EN-Standard Test Method for Cyclic Pressure Strength of Reinforced Thermosetting Plastic Pipe
  • ASTM D2144 : EN-Standard Test Methods for Examination of Electrical Insulating Oils by Infrared Absorption
  • ASTM D2146 : EN-Specification for Propylene plastic Molding and Extrusion Materials
  • ASTM D2147 : EN-STANDARD TEST METHOD FOR DETECTION AND ESTIMATION OF WATER-INSOLUBLE IMPURITIES IN REFINED PHENOL BY CLOUD POINT DEPRESSION
  • ASTM D2148 : EN-Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
  • ASTM D2149 : EN-Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 Degrees C
  • ASTM D215 : EN-Standard Practice for the Chemical Analysis of White Linseed Oil Paints
  • ASTM D2150 : EN-STANDARD SPECIFICATION FOR WOVEN ROVING GLASS FABRIC POLYESTER-GLASS LAMINATES
  • ASTM D2151 : EN-STANDARD PRACTICE FOR STAINING OF POLY(VINYL CHLORIDE) COMPOSITIONS BY RUBBER COMPOUNDING INGREDIENTS
  • ASTM D2152 : EN-Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
  • ASTM D2155 : EN-Standard Method of Test for AUTOIGNTION TEMPERATURE OF LIQUID PRTROLEUM PRODUCTS
  • ASTM D2156 : EN-Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
  • ASTM D2157 : EN-Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
  • ASTM D2158 : EN-Standard Test Method for Residues in Liquefied Petroleum (LP) Gases-IP Designation: 317/95
  • ASTM D2159 : EN-STANDARD TEST METHOD FOR NAPHTHENES IN SATURATES FRACTIONS BY REFRACTIVITY INTERCEPT
  • ASTM D216 : EN-STANDARD METHOD FOR DISTILLATION OF NATURAL GASOLINE (R 1982)
  • ASTM D2160 : EN-Standard Test Method for Thermal Stability of Hydraulic Fluids
  • ASTM D2161 : EN-STANDARD PRACTICE FOR CONVERSION OF KINEMATIC VISCOSITY TO SAYBOLT UNIVERSAL VISCOSITY OR TO SAYBOLT FUROL VISCOSITY
  • ASTM D2162 : EN-Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D2163 : EN-STANDARD TEST METHOD FOR ANALYSIS OF LIQUEFIED PETROLEUM (LP) GASES AND PROPENE CONCENTRATES BY GAS CHROMATOGRAPHY (IP 264/79)
  • ASTM D2164 : EN-Standard Methods of Testing Structural Insulating Roof Deck
  • ASTM D2165 : EN-Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers
  • ASTM D2166 : EN-Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
  • ASTM D2166 REV A : EN-Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
  • ASTM D2167 : EN-Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
  • ASTM D2168 : EN-Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
  • ASTM D2168 REV A : EN-Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
  • ASTM D217 : EN-Standard Test Methods for Cone Penetration of Lubricating Grease
  • ASTM D2170 : EN-Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)-IP Designation: 319/84 (89)
  • ASTM D2170 REV A : EN-Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)-IP Designation: 319/84 (89)
  • ASTM D2171 : EN-Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • ASTM D2172 : EN-STANDARD TEST METHODS FOR QUANTITATIVE EXTRACTION OF BITUMEN FROM BITUMINOUS PAVING MIXTURES (AASHTO T164)
  • ASTM D2175 : EN-Standard Test Method for Book Bulk and Book Bulking Number of Paper
  • ASTM D2176 : EN-STANDARD TEST METHOD FOR FOLDING ENDURANCE OF PAPER BY THE M.I.T. TESTER (R 1982)
  • ASTM D2176 REV A : EN-Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
  • ASTM D2177 : EN-Standard Test Method for Ink Absorption of Blotting Paper
  • ASTM D2178 : EN-Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
  • ASTM D2178 REV A : EN-Standard Specification for ASPHALT GLASS FELT USED IN ROOFING AND WATERPROOFING
  • ASTM D2179 : EN-Standard Specification for Combination Bar Soap
  • ASTM D2180 : EN-Standard Test Method for Active Oxygen in Bleaching Compounds
  • ASTM D2183 : EN-STANDARD TEST METHOD FOR FLOW PROPERTIES OF ADHESIVES
  • ASTM D2184 : EN-STANDARD METHOD OF TESTING DEUTERIUM OXIDE
  • ASTM D2186 : EN-Standard Test Methods for Deposit-Forming Impurities in Steam
  • ASTM D2187 : EN-STANDARD TEST METHODS FOR PHYSICAL AND CHEMICAL PROPERTIES OF PARTICULATE ION-EXCHANGE RESINS (e1-1989)
  • ASTM D2187 REV A : EN-STANDARD TEST METHODS FOR PHYSICAL AND CHEMICAL PROPERTIES OF PARTICULATE ION-EXCHANGE RESINS
  • ASTM D2190 : EN-Standard Specification for Vinyl Acetate
  • ASTM D2191 : EN-Standard Test Method for Acetaldehyde Content of Vinyl Acetate
  • ASTM D2192 : EN-STANDARD TEST METHOD FOR PURITY OF ALDEHYDES AND KETONES
  • ASTM D2193 : EN-Standard Test Method for Hydroquinone in Vinyl Acetate
  • ASTM D2194 : EN-Standard Test Method for Concentration of Formaldehyde Solutions
  • ASTM D2195 : EN-STANDARD METHODS FOR TESTING PENTAERYTHRITOL
  • ASTM D2196 : EN-Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield Type) Viscometer
  • ASTM D2197 : EN-Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
  • ASTM D2198 : EN-Standard Test Method for Stain Removal from Multicolor Lacquers
  • ASTM D2199 : EN-Standard Test Method for Measurement of Plasticizer Migration from Vinyl Fabrics to Lacquers
  • ASTM D2200 : EN-STANDARD PICTORIAL SURFACE PREPARATION STANDARDS FOR PAINTING STEEL SURFACES (SWEDISH STANDARDS SIS 05 59 00) (STEEL STRUCTURES PAINTING COUNCIL SSPC-VIS 1) (DANISH STANDARD DS 2019) (E1-1993)
  • ASTM D2201 : EN-Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
  • ASTM D2202 : EN-Standard Test Method for Slump of Sealants
  • ASTM D2202 REV A : EN-Standard Test Method for Slump of Sealants
  • ASTM D2203 : EN-STANDARD TEST METHOD FOR STAINING OF CAULKING COMPOUNDS AND SEALANTS
  • ASTM D2205 : EN-Standard Guide for Selection of Tests for Traffic Paints
  • ASTM D2207 : EN-Standard Test Method for Bursting Strength of Leather by the Ball Method
  • ASTM D2208 : EN-Standard Test Method for Breaking Strength of Leather by the Grab Method
  • ASTM D2209 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF LEATHER LEATHER ASSN. STANDARD METHOD E 15 – 1965)
  • ASTM D2210 : EN-Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
  • ASTM D2211 : EN-Standard Test Method for Elongation of Leather
  • ASTM D2212 : EN-STANDARD TEST METHOD FOR SLIT TEAR RESISTANCE OF LEATHER (R 1989) (AMERICAN LEATHER CHEMISTS ASSN. STANDARD METHOD E59-1965)
  • ASTM D2213 : EN-Standard Test Method for Compressibility of Leather
  • ASTM D2214 : EN-Standard Test Method for Estimating the Thermal Conductivity of Leather with the Cenco-Fitch Apparatus
  • ASTM D2216 : EN-STANDARD TEST METHOD FOR LABORATORY DETERMINATION OF WATER (MOISTURE) CONTENT OF SOIL AND ROCK (e1-1991)
  • ASTM D2217 : EN-Standard Practice for Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
  • ASTM D2218 : EN-Standard Specification for Molybdate Orange Pigments
  • ASTM D2219 : EN-Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable 60 Degrees C Operation
  • ASTM D2220 : EN-Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable 75 Degrees C Operation
  • ASTM D2221 : EN-Standard Test Method for Creep Properties of Package Cushioning Materials
  • ASTM D2222 : EN-Standard Test Method for Methanol Extract of Vinyl Chloride Resins
  • ASTM D2223 : EN-Standard Test Method for Oxygen Impurity in Nitrogen (Electrochemical Method)
  • ASTM D2224 : EN-STANDARD TEST METHOD FOR MEAN MOLECULAR WEIGHT OF MINERAL INSULATING OILS BY THE CRYOSCOPIC METHOD
  • ASTM D2225 : EN-Standard Test Methods for Silicone Fluids Used for Electrical Insulation
  • ASTM D2226 : EN-Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
  • ASTM D2227 : EN-Standard Specification for Natural Rubber (NR) Technical Grades
  • ASTM D2228 : EN-Standard Test Method for Rubber PropertyRelative Abrasion Resistance by Pico Abrader Method
  • ASTM D2229 : EN-Standard Test Method for Adhesion between Steel Tire Cords and Rubber
  • ASTM D2229 REV A : EN-Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
  • ASTM D2230 : EN-Standard Test Method for Rubber Property – Extrudability of Unvulcanized Compounds
  • ASTM D2231 : EN-Standard Practice for Rubber Properties in Forced Vibration
  • ASTM D2232 : EN-STANDARD TEST METHOD FOR EVAPORATING RESIDUE OF NAPHTHALENE
  • ASTM D2233 : EN-STANDARD SPECIFICATION FOR CHLORINATED AROMATIC HYDROCARBONS (ASKARELS) FOR CAPACITORS
  • ASTM D2234 : EN-COLLECTION OF A GROSS SAMPLE OF COAL METHODS FOR
  • ASTM D2234 REV A : EN-Standard Practice for Collection of a Gross Sample of Coal
  • ASTM D2234/D2234M : EN-Standard Practice for Collection of a Gross Sample of Coal
  • ASTM D2244 : EN-Standard Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates
  • ASTM D2244 REV A : EN-Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
  • ASTM D2244 REV B : EN-Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
  • ASTM D2245 : EN-STANDARD METHOD FOR IDENTIFICATION OF OILS AND OIL ACIDS IN SOLVENT-REDUCIBLE PAINTS (R 1984) (E1-1984)
  • ASTM D2246 : EN-STANDARD METHOD FOR TESTING FINISHES ON PRIMED METALLIC SUBSTRATES FOR HUMIDITY- THERMAL CYCLE CRACKING (R 1981)
  • ASTM D2247 : EN-Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
  • ASTM D2247 REV A : EN-STANDARD PRACTICE FOR TESTING WATER RESISTANCE OF COATINGS IN 100% RELATIVE HUMIDITY
  • ASTM D2248 : EN-STANDARD PRACTICE FOR DETERGENT RESISTANCE OF ORGANIC FINISHES (R 1982)
  • ASTM D2248 REV A : EN-Standard Practice for Detergent Resistance of Organic Finishes
  • ASTM D2249 : EN-Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash
  • ASTM D225 : EN-Standard Specification for Asphalt Shingles (Organic Felt) Surfaced with Mineral Granules
  • ASTM D225 REV A : EN-STANDARD SPECIFICATION FOR ASPHALT SHINGLES (ORGANIC FELT) SURFACED WITH MINERAL GRANULES
  • ASTM D2250 : EN-PHYSICAL AND ELECTRICAL BREAKDOWN OF INSULATING MATERIALS BY HALOGENATED ORGANIC SOLVENTS AND THEIR ADMIXTURES TEST METHOD FOR (R 1978) (E1-1985)
  • ASTM D2251 : EN-Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
  • ASTM D2252 : EN-Standard Specification for Fineness of Types of Alpaca
  • ASTM D2253 : EN-STANDARD TEST METHOD FOR COLOR OF RAW COTTON USING THE NICKERSON-HUNTER COTTON COLORIMETER
  • ASTM D2255 : EN-STANDARD TEST METHOD FOR GRADING COTTON YARNS FOR APPEARANCE
  • ASTM D2255/D2255M : EN-Standard Test Method for Grading Spun Yarns for Appearance
  • ASTM D2256 : EN-Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
  • ASTM D2256 REV A : EN-Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
  • ASTM D2256/D2256M : EN-Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
  • ASTM D2257 : EN-Standard Test Method for Extractable Matter in Textiles
  • ASTM D2258 : EN-STANDARD PRACTICE FOR SAMPLING YARN FOR TESTING
  • ASTM D2259 : EN-Standard Test Method for Shrinkage of Yarns
  • ASTM D226 : EN-STANDARD SPECIFICATION FOR ASPHALT-SATURATED ORGANIC FELT USED IN ROOFING AND WATERPROOFING
  • ASTM D226 REV A : EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
  • ASTM D226/D226M : EN-Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
  • ASTM D2260 : EN-STANDARD TABLES OF CONVERSION FACTORS AND EQUIVALENT YARN NUMBERS MEASURED IN VARIOUS NUMBERING SYSTEMS
  • ASTM D2261 : EN-Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
  • ASTM D2261 REV A : EN-Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
  • ASTM D2262 : EN-Standard Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-Of-Traverse Tensile Testing Machine)
  • ASTM D2265 : EN-STANDARD TEST METHOD FOR DROPPING POINT OF LUBRICATING GREASE OVER WIDE TEMPERATURE RANGE (R 1983)
  • ASTM D2265 REV A : EN-Standard Test Method for Dropping Point of Lubricating Grease over Wide Temperature Range
  • ASTM D2266 : EN-STANDARD TEST METHOD FOR WEAR PREVENTIVE CHARACTERISTICS OF LUBRICATING GREASE (FOUR-BALL METHOD) (R 1981)
  • ASTM D2267 : EN-STANDARD TEST METHOD FOR AROMATICS IN LIGHT NAPHTHAS AND AVIATION GASOLINES BY GAS CHROMATOGRAPHY
  • ASTM D2268 : EN-STANDARD TEST METHOD FOR ANALYSIS OF HIGH-PURITY N-HEPTANE AND ISOOCTANE BY CAPILLARY GAS CHROMATOGRAPHY
  • ASTM D2269 : EN-Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
  • ASTM D227 : EN-STANDARD SPECIFICATION FOR COAL-TAR-SATURATED ORGANIC FELT USED IN ROOFING AND WATERPROOFING
  • ASTM D227 REV A : EN-Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
  • ASTM D2270 : EN-STANDARD PRACTICE FOR CALCULATING VISCOSITY INDEX FROM KINEMATIC VISCOSITY AT 40 AND 100 DEGREES C (BRITISH STANDARD 4459) (IP 226/91)
  • ASTM D2271 : EN-STANDARD PRACTICE FOR PRELIMINARY EXAMINATION OF HYDRAULIC FLUIDS (WEAR TEST)
  • ASTM D2272 : EN-Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D2273 : EN-Standard Test Method for Trace Sediment in Lubricating Oils
  • ASTM D2274 : EN-Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)-IP Designation: 388/97
  • ASTM D2274 REV A : EN-Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)-IP Designation: 388/97
  • ASTM D2275 : EN-STANDARD TEST METHOD FOR VOLTAGE ENDURANCE OF SOLID ELECTRICAL INSULATING MATERIALS SUBJECTED TO PARTIAL DISCHARGES (CORONA) ON THE SURFACE (R 1994) (E1-1994)
  • ASTM D2276 : EN-Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling-IP Designation: 216/97
  • ASTM D2276 REV A : EN-Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling-IP Designation: 216/97
  • ASTM D2277 : EN-STANDARD SPECIFICATION FOR FIBERBOARD NAIL-BASE SHEATHING (DISCONTINUED – 1993)
  • ASTM D2278 : EN-Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
  • ASTM D228 : EN-Standard Test Methods for Asphalt Roll Roofing Cap Sheets and Shingles
  • ASTM D228 REV A : EN-Standard Test Methods for Sampling Testing and Analysis of Asphalt Roll Roofing Cap Sheets and Shingles Used in Roofing and Waterproofing
  • ASTM D228 REV B : EN-Standard Test Methods for Asphalt Roll Roofing Cap Sheets and Shingles
  • ASTM D228/D228M : EN-Standard Test Methods for Sampling Testing and Analysis of Asphalt Roll Roofing Cap Sheets and Shingles Used in Roofing and Waterproofing
  • ASTM D2281 : EN-Standard Test Method for Evaluation of Wetting Agents by the Skein Test
  • ASTM D2282 : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) PLASTIC PIPE (SDR-PR)
  • ASTM D2282 REV A : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
  • ASTM D2283 : EN-STANDARD SPECIFICATION FOR CHLORINATED AROMATIC HYDROCARBONS (ASKARELS) FOR TRANSFORMERS (R 1985) (E1-1985)
  • ASTM D2284 : EN-Standard Test Method for Acidity of Sulfur Hexafluoride
  • ASTM D2285 : EN-Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method
  • ASTM D2287 : EN-Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • ASTM D2288 : EN-Standard Test Method for Weight Loss of Plasticizers on Heating
  • ASTM D2289 : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS AT HIGH SPEEDS
  • ASTM D229 : EN-Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
  • ASTM D229 REV A : EN-Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
  • ASTM D229 REV B : EN-Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
  • ASTM D2290 : EN-Standard Test Method for Apparent Tensile Strength of Ring or Tubular Plastics and Reinforced Plastics by Split Disk Method
  • ASTM D2291 : EN-Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
  • ASTM D2292 : EN-STANDARD PRACTICE FOR COMPRESSION MOLDING TEST SPECIMENS OF SYTRENE- BUTADIENE MOLDING AND EXTRUSION MATERIALS
  • ASTM D2293 : EN-STANDARD TEST METHOD FOR CREEP PROPERTIES OF ADHESIVES IN SHEAR BY COMPRESSION LOADING (METAL-TO-METAL)
  • ASTM D2294 : EN-Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
  • ASTM D2295 : EN-STANDARD TEST METHOD FOR STRENGTH PROPERTIES OF ADHESIVES IN SHEAR BY TENSION LOADING AT ELEVATED TEMPERATURES (METAL-TO-METAL) (R 1983)
  • ASTM D2296 : EN-Standard Specification for Continuity of Quality of Electrical Insulating Polybutene Oil for Capacitors
  • ASTM D2297 : EN-STANDARD SPECIFICATION FOR CONTINUITY OF QUALITY OF ELECTRICAL INSULATING MINERAL OIL FOR CAPACITORS AND CABLE ACCESSORIES
  • ASTM D2298 : EN-STANDARD TEST METHOD FOR STABILITY OF INSULATING OILS UNDER ELECTRICAL STRESS (MERRELL TEST)
  • ASTM D2299 : EN-STANDARD RECOMMENDED PRACTICE FOR DETERMINING RELATIVE STAIN RESISTANCE OF PLASTICS
  • ASTM D2300 : EN-Standard Test Method for Gassing of Electrical Insulating Liquids under Electrical Stress and Ionization (Modified Pirelli Method)
  • ASTM D2301 : EN-Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  • ASTM D2303 : EN-STANDARD TEST METHODS FOR LIQUID-CONTAMINANT INCLINED-PLANE TRACKING AND EROSION OF INSULATING MATERIALS
  • ASTM D2304 : EN-Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
  • ASTM D2305 : EN-Standard Test Methods for Polymeric Films Used for Electrical Insulation
  • ASTM D2306 : EN-Standard Test Method for C8 Aromatic Hydrocarbon Analysis by Gas Chromatography
  • ASTM D2307 : EN-Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
  • ASTM D2307 REV A : EN-Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
  • ASTM D2308 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE JACKET FOR ELECTRICAL INSULATED WIRE AND CABLE
  • ASTM D231 : EN-Standard Methods of Testing and Tolerances for KNIT GOODS
  • ASTM D2310 : EN-Standard Classification for Machine-Made -Fiberglass- (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2311 : EN-STANDARD SPECIFICATION FOR PERFORATED HOMOGENEOUS BITUMINIZED FIBER PIPE FOR GENERAL DRAINAGE
  • ASTM D2312 : EN-STANDARD SPECIFICATION FOR PERFORATED HOMOGENEOUS BITUMINIZED FIBER PIPE FOR SEPTIC TANK DISPOSAL FIELDS (R 1981)
  • ASTM D2313 : EN-STANDARD SPECIFICATION FOR PERFORATED LAMINATED-WALL BITUMINIZED FIBER PIPE FOR SEPTIC TANK DISPOSAL FIELDS
  • ASTM D2314 : EN-STANDARD METHODS OF TESTING HOMOGENEOUS BITUMINIZED FIBER PIPE
  • ASTM D2315 : EN-STANDARD METHODS OF TESTING LAMINATED-WALL BITUMINIZED FIBER PIPE
  • ASTM D2316 : EN-STANDARD RECOMMENDED PRACTICE FOR INSTALLING BITUMINIZED FIBER DRAIN AND SEWER PIPE
  • ASTM D2318 : EN-Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D2319 : EN-Standard Test Method for Softening Point of Pitch (Cube-in-Air-Method)
  • ASTM D2319/D2319M : EN-Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
  • ASTM D2320 : EN-Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • ASTM D2321 : EN-Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
  • ASTM D2321 REV A : EN-STANDARD PRACTICE FOR UNDERGROUND INSTALLATION OF FLEXIBLE THERMOPLASTIC SEWER PIPE
  • ASTM D2322 : EN-Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
  • ASTM D2323 : EN-STANDARD SPECIFICATION FOR REFINED PYRIDINE (1 DEGREE) (R 1989) (E1-1989)
  • ASTM D2324 : EN-STANDARD TEST METHOD FOR CARBON DISULFIDE IN BENZENE
  • ASTM D2325 : EN-Standard Test Method for Capillary-Moisture Relationships for Coarse- and Medium-Textured Soils by Porous-Plate Apparatus
  • ASTM D2327 : EN-STANDARD TEST METHOD FOR MONO- AND DIOCTADECYLAMINES IN WATER
  • ASTM D233 : EN-Standard Test Methods of Sampling and Testing Turpentine
  • ASTM D2330 : EN-STANDARD TEST METHODS FOR METHYLENE BLUE ACTIVE SUBSTANCES
  • ASTM D2331 : EN-Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
  • ASTM D2332 : EN-Standard Practice for Analysis of Water-Formed Deposits by Wavelength- Dispersive X-Ray Fluorescence
  • ASTM D2333 : EN-STANDARD TEST METHOD FOR THORIUM IN WATER
  • ASTM D2334 : EN-STANDARD TEST METHODS FOR RADIOACTIVE IODINE IN WATER
  • ASTM D2336 : EN-STANDARD PRACTICE FOR SPECIFYING PROPERTIES FROM LIQUID THROUGH CURED STATE FOR COATINGS FACTORY APPLIED TO WOOD PRODUCTS
  • ASTM D2337 : EN-Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
  • ASTM D2338 : EN-Standard Test Method for Determining Particle Size of Multicolor Lacquers
  • ASTM D2339 : EN-Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
  • ASTM D2339 REV A : EN-Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
  • ASTM D234 : EN-Standard Specification for Raw Linseed Oil
  • ASTM D2340 : EN-STANDARD TEST METHOD FOR PEROXIDES IN STYRENE MONOMER (R 1992)
  • ASTM D2341 : EN-Standard Specification for Rigid Urethane Foam
  • ASTM D2343 : EN-Standard Test Method for Tensile Properties of Glass Fiber Strands Yarns and Rovings Used in Reinforced Plastics
  • ASTM D2344 : EN-Standard Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method
  • ASTM D2344/D2344M : EN-Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
  • ASTM D2346 : EN-Standard Test Method for Apparent Density of Leather
  • ASTM D2347 : EN-Standard Test Method for Measuring Area of Leather Test Specimens
  • ASTM D2348 : EN-Standard Test Method for Arsenic in Paint
  • ASTM D2349 : EN-Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
  • ASTM D235 : EN-Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
  • ASTM D2350 : EN-Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
  • ASTM D2351 : EN-STANDARD TEST METHOD FOR SULFIDE IN WHITE PIGMENT SEPARATED FROM SOLVENT-REDUCIBLE PAINTS
  • ASTM D2352 : EN-Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
  • ASTM D2353 : EN-STANDARD TEST METHOD FOR FLOW RATINGS OF ORGANIC COATINGS USING THE SHELL FLOW COMPARATOR
  • ASTM D2354 : EN-Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
  • ASTM D2355 : EN-STANDARD RECOMMENDED PRACTICE FOR LIQUID PHASE EVALUATION OF ACTIVATED CARBON (R 1976)
  • ASTM D2356 : EN-STANDARD SPECIFICATION FOR SCOURING POWDER COMPOUNDS (R 1982)
  • ASTM D2357 : EN-Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • ASTM D2358 : EN-Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • ASTM D2359 : EN-STANDARD SPECIFICATION FOR REFINED BENZENE- 535
  • ASTM D2359 REV A : EN-STANDARD SPECIFICATION FOR REFINED BENZENE-535
  • ASTM D2360 : EN-Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
  • ASTM D2360 REV A : EN-Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
  • ASTM D2361 : EN-STANDARD TEST METHOD FOR CHLORINE IN COAL
  • ASTM D2363 : EN-Standard Test Methods for Hydroxypropyl Methylcellulose
  • ASTM D2364 : EN-Standard Test Methods for Hydroxyethylcellulose
  • ASTM D2366 : EN-STANDARD TEST METHOD FOR ACCELERATED TESTING OF MOISTURE BLISTER RESISTANCE OF EXTERIOR HOUSE PAINTS ON WOOD
  • ASTM D2369 : EN-Standard Test Method for Volatile Content of Coatings
  • ASTM D237 : EN-Standard Specification for Orange Shellac and Other Lacs
  • ASTM D2370 : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF ORGANIC COATINGS (R 1987) (E1-1987;E2-1991)
  • ASTM D2371 : EN-Standard Test Method for Pigment Content of Solvent-Reducible Paints
  • ASTM D2372 : EN-Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
  • ASTM D2373 : EN-Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
  • ASTM D2374 : EN-Standard Test Method for Lead in Paint Driers by EDTA Method
  • ASTM D2375 : EN-Standard Test Method for Manganese in Paint Driers by EDTA Method
  • ASTM D2376 : EN-STANDARD TEST METHOD FOR SLUMP OF FACE GLAZING AND BEDDING COMPOUNDS ON METAL SASH (R 1989)
  • ASTM D2377 : EN-Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
  • ASTM D2378 : EN-Standard Specification for Formaldehyde 50% Grade Uninhibited and 37% Grade Inhibited and Uninhibited
  • ASTM D2379 : EN-Standard Test Method for Acidity of Formaldehyde Solutions
  • ASTM D2380 : EN-Standard Test Method for Methanol Content of Formaldehyde Solutions
  • ASTM D2381 : EN-Standard Test Methods for Flexible Composite Materials Used for Electrical Insulation
  • ASTM D2382 : EN-STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF HYDROCARBON FUELS BY BOMB CALORIMETER (HIGH-PRECISION METHOD)
  • ASTM D2383 : EN-Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds under Humid Conditions
  • ASTM D2384 : EN-Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
  • ASTM D2385 : EN-Standard Test Method for Hydrogen Sulfide and Mercaptan Sulfur in Natural Gas (Cadmium Sulfate Iodometric Titration Method)
  • ASTM D2386 : EN-Standard Test Method for Freezing Point of Aviation Fuels
  • ASTM D2389 : EN-Standard Test Method for Minimum Pressure for Vapor Phase Ignition of Monopropellants
  • ASTM D2392 : EN-Standard Test Method for Color of Dyed Aviation Gasolines
  • ASTM D2393 : EN-Standard Test Method for Viscosity of Epoxy Resins and Related Components
  • ASTM D2394 : EN-Standard Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
  • ASTM D2395 : EN-Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
  • ASTM D2395 REV A : EN-Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
  • ASTM D2396 : EN-STANDARD TEST METHOD FOR POWDER-MIX TIME OF POLY (VINYL CHLORIDE) (PVC) RESINS USING A TORQUE RHEOMETER (R-1985)
  • ASTM D2397 : EN-Standard Specification for Cationic Emulsified Asphalt
  • ASTM D2399 : EN-Standard Practice for Selection of Cutback Asphalts
  • ASTM D240 : EN-STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
  • ASTM D2400 : EN-STANDARD SPECIFICATION FOR VARNISHED GLASS- POLYESTER CLOTH USED FOR ELECTRICAL INSULATION
  • ASTM D2401 : EN-STANDARD TEST METHOD FOR SERVICE CHANGE OF APPEARANCE OF PILE FLOOR COVERINGS
  • ASTM D2402 : EN-STANDARD TEST METHOD FOR WATER RETENTION OF FIBERS (CENTRIFUGE METHOD)
  • ASTM D2403 : EN-Standard Specification for Refined Phthalic Anhydride-1308
  • ASTM D2408 : EN-STANDARD TEST METHOD FOR FINISH CONTENT OF WOVEN GLASS FABRIC CLEANED AND AFTER-FINISHED WITH AMINO-SILANE-TYPE FINISHES FOR PLASTIC LAMINATES
  • ASTM D2409 : EN-STANDARD TEST METHOD FOR FINISH CONTENT OF WOVEN GLASS FABRIC CLEANED AND AFTER- FINISHED WITH VINYL- SILANE-TYPE FINISHES FOR PLASTIC LAMINATES
  • ASTM D2410 : EN-Standard Test Method for finish Content of Woven Glass Fabric Cleaned and After-Finished with Chrome Complexes for Plastic Laminates
  • ASTM D2411 : EN-STANDARD SPECIFICATION FOR CELLULOSE ACETATE BUTYRATE FILM AND SHEETING FOR FABRICATING AND FORMING
  • ASTM D2412 : EN-Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • ASTM D2412 REV A : EN-Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • ASTM D2413 : EN-Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
  • ASTM D2414 : EN-Standard Test Method for Carbon Black-n-Dibutyl Phthalate Absorption Number
  • ASTM D2414 REV A : EN-Standard Test Method for Carbon BlackOil Absorption Number (OAN)
  • ASTM D2414 REV B : EN-STANDARD TEST METHOD FOR CARBON BLACK – N-DIBUTYL PHTHALATE ABSORPTION NUMBER
  • ASTM D2415 : EN-Standard Test Method for Ash in Coal Tar and Pitch
  • ASTM D2416 : EN-Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
  • ASTM D2417 : EN-STANDARD SPECIFICATION FOR PERFORATED LAMINATED-WALL BITUMINIZED FIBER PIPE FOR GENERAL DRAINAGE (R 1981)
  • ASTM D2418 : EN-STANDARD SPECIFICATION FOR PERFORATED LAMINATED-WALL BITUMINIZED FIBER PIPE FOR AIRPORT AND HIGHWAY DRAINAGE (R 1981)
  • ASTM D2419 : EN-Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
  • ASTM D242 : EN-Standard Specification for Mineral Filler for Bituminous Paving Mixtures
  • ASTM D2420 : EN-Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2421 : EN-Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume Liquid-Volume or Weight Basis
  • ASTM D2422 : EN-Standard Classification of Industrial Fluid Lubricants by Viscosity System
  • ASTM D2423 : EN-Standard Test Method for Surface Wax on Waxed Paper or Paperboard
  • ASTM D2424 : EN-STANDARD TEST METHOD FOR HYDROCARBON TYPES IN PROPYLENE POLYMER BY MASS SPECTROMETRY
  • ASTM D2425 : EN-Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
  • ASTM D2426 : EN-Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM D2427 : EN-Standard Test Method for Determination of C2 Through C5 Hydrocarbons in Gasolines by Gas Chromatography
  • ASTM D2428 : EN-STANDARD TEST METHOD FOR SIMULATIVE RECIRCULATING SYSTEM TESTING OF AEROSPACE HYDRAULIC FLUIDS
  • ASTM D243 : EN-Standard Test Method for Residue of Specified Penetration
  • ASTM D2433 : EN-Standard Test Methods for Rubber Thread
  • ASTM D2434 : EN-Standard Test Method for Permeability of Granular Soils (Constant Head)
  • ASTM D2435 : EN-Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
  • ASTM D2436 : EN-STANDARD SPECIFICATION FOR FORCED-CONVECTION LABORATORY OVENS FOR ELECTRICAL INSULATION (WITHDRAWN)
  • ASTM D2438 : EN-STANDARD TEST METHOD FOR SILICA IN CELLULOSE
  • ASTM D2439 : EN-Standard Specification for Refined Phenol
  • ASTM D244 : EN-Standard Test Methods and Practices for Emulsified Asphalts
  • ASTM D244 REV C : EN-Standard Test Methods and Practices for Emulsified Asphalts-AASHTO No.: T 59
  • ASTM D2440 : EN-STANDARD TEST METHOD FOR OXIDATION STABILITY OF MINERAL INSULATING OIL
  • ASTM D2441 : EN-STANDARD TEST METHOD FOR HYDROLYZABLE CHLORINE COMPOUNDS IN CHLORINATED AROMATIC HYDROCARBONS (ASKARELS) BY REFLUXING
  • ASTM D2442 : EN-Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
  • ASTM D2443 : EN-Standard Test Methods for Lacing Twines and Tapes Used as Harnesses in Electrical Equipment
  • ASTM D2444 : EN-STANDARD TEST METHOD FOR IMPACT RESISTANCE OF THERMOPLASTIC PIPE AND FITTINGS BY MEANS OF A TUP (FALLING WEIGHT)
  • ASTM D2445 : EN-STANDARD TEST METHOD FOR THERMAL OXIDATIVE STABILITY OF PROPYLENE PLASTICS (R 1981) (E1-1981)
  • ASTM D2446 : EN-STANDARD SPECIFICATION FOR CELLULOSE ACETATE BUTYRATE (CAB) PLASTIC PIPE (SDR-PR) AND TUBING
  • ASTM D2447 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE SCHEDULES 40 AND 80 BASED ON OUTSIDE DIAMETER
  • ASTM D2448 : EN-Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • ASTM D2449 : EN-Standard Specification for Rubber Bales From Natural Sources-Limit on Coating
  • ASTM D245 : EN-Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
  • ASTM D2450 : EN-Standard Test Method for Bond of Oil- and Resin-Base Caulking Compounds
  • ASTM D2451 : EN-STANDARD TEST METHOD FOR DEGREE OF SET FOR GLAZING COMPOUNDS ON METAL SASH (R 1993) (e1-1987)
  • ASTM D2452 : EN-STANDARD TEST METHOD FOR EXTRUDABILITY OF OIL- AND RESIN-BASE CAULKING COMPOUNDS (R 1993) (e1-1987)
  • ASTM D2453 : EN-STANDARD TEST METHOD FOR SHRINKAGE AND TENACITY OF OIL-AND RESIN-BASE CAULKING COMPOUNDS (R 1981)
  • ASTM D2454 : EN-Standard Practice for Determining the Effect of Overbaking on Organic Coatings
  • ASTM D2454 REV A : EN-STANDARD PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS
  • ASTM D2455 : EN-STANDARD METHOD FOR IDENTIFICATION OF CARBOXYLIC ACIDS IN ALKYD RESINS (R 1981) (E1-1981)
  • ASTM D2456 : EN-STANDARD TEST METHOD FOR IDENTIFICATION OF POLYHYDRIC ALCOHOLS IN ALKYD RESINS
  • ASTM D2457 : EN-Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D2459 : EN-STANDARD TEST METHOD FOR GAMMA SPECTROMETRY OF WATER
  • ASTM D246 : EN-Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions-AASHTO No. T 62
  • ASTM D246 REV A : EN-Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
  • ASTM D2460 : EN-Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
  • ASTM D2461 : EN-STANDARD TEST METHOD FOR IRON-59 IN WATER
  • ASTM D2462 : EN-Standard Test Method for Moisture in Wool by Distillation with Toluene
  • ASTM D2463 : EN-Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
  • ASTM D2463 REV A : EN-Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
  • ASTM D2464 : EN-STANDARD SPECIFICATION FOR THREADED POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE FINTTINGS SCHEDULE 80
  • ASTM D2464 REV A : EN-Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80
  • ASTM D2465 : EN-STANDARD SPECIFICATION FOR THREADED ACRYLONITRILE-BUTADIENE-STYRENE (ABS) PLASTIC PIPE FITTINGS SCHEDULE 80
  • ASTM D2466 : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 40
  • ASTM D2466 REV A : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPE FITTINGS SCHEDULE 40
  • ASTM D2467 : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80
  • ASTM D2467 REV A : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80
  • ASTM D2468 : EN-Standard Specification for Acrylonitrile- Butadiene-Styrene (ABS) Plastic Pipe Fittings Schedule 40
  • ASTM D2468 REV A : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings Schedule 40
  • ASTM D2469 : EN-Standard Specification for Socket-Type Acrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe Fittings Schedule 80
  • ASTM D2470 : EN-STANDARD METHOD FOR MEASUREMENT OF DELAYED NEUTRON EMITTING FISSION PRODUCTS IN NUCLEAR REACTOR COOLANT WATER DURING REACTOR OPERATION
  • ASTM D2471 : EN-STANDARD TEST METHOD FOR GEL TIME AND PEAK EXOTHERMIC TEMPERATURE OF REACTING THERMOSETTING RESINS
  • ASTM D2472 : EN-Standard Specification for Sulfur Hexafluoride
  • ASTM D2474 : EN-STANDARD SPECIFICATION FOR VINYL CHLORIDE COPOLYMER RESINS (R 1987) (E1-1987)
  • ASTM D2475 : EN-Standard Specification for Wool Felt
  • ASTM D2476 : EN-STANDARD TEST METHOD FOR TRITIUM IN WATER
  • ASTM D2477 : EN-Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
  • ASTM D2480 : EN-STANDARD TEST METHOD FOR MATURITY INDEX AND LINEAR DENSITY OF COTTON FIBERS BY THE CAUSTICAIRE METHOD
  • ASTM D2481 : EN-Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
  • ASTM D2482 : EN-STANDARD METHOD OF WAX PICK TEST FOR SURFACE STRENGTH OF PAPER (R 1986) (E1-1985)
  • ASTM D2484 : EN-STANDARD SPECIFICATION FOR POLYESTER FILM PRESSURE-SENSITIVE ELECTRICAL INSULATING TAPE
  • ASTM D2485 : EN-STANDARD TEST METHODS FOR EVALUATING COATINGS DESIGNED TO BE RESISTANT TO ELEVATED TEMPERATURES DURING THEIR SERVICE LIFE
  • ASTM D2486 : EN-STANDARD TEST METHOD FOR SCRUB RESISTANCE OF INTERIOR LATEX FLAT WALL PAINTS
  • ASTM D2487 : EN-Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
  • ASTM D2488 : EN-STANDARD PRACTICE FOR DESCRIPTION AND IDENTIFICATION OF SOILS (VISUAL-MANUAL PROCEDURE)
  • ASTM D2488 REV A : EN-Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
  • ASTM D2489 : EN-Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
  • ASTM D2489/D2489M : EN-Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
  • ASTM D249 : EN-Standard Specification for Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules
  • ASTM D2492 : EN-Standard Test Method for Forms of Sulfur in Coal
  • ASTM D2493 : EN-STANDARD VISCOSITY- TEMPERATURE CHART FOR ASPHALTS
  • ASTM D2493 REV A : EN-Standard Viscosity-Temperature Chart for Asphalts
  • ASTM D2493/D2493M : EN-Standard Viscosity-Temperature Chart for Asphalts
  • ASTM D2494 : EN-STANDARD TEST METHOD FOR COMMERCIAL MASS OF A SHIPMENT OF YARN OR MAN-MADE STAPLE FIBER OR TOW
  • ASTM D2495 : EN-Standard Test Method for Moisture in Cotton by Oven-Drying
  • ASTM D2496 : EN-STANDARD TEST METHODS FOR SEED COAT FRAGMENTS AND FUNICULI IN COTTON FIBER SAMPLES
  • ASTM D2497 : EN-Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
  • ASTM D25 : EN-Standard Specification for Round Timber Piles
  • ASTM D25 REV A : EN-STANDARD SPECIFICATION FOR ROUND TIMBER PILES
  • ASTM D250 : EN-STANDARD SPECIFICATION FOR ASPHALT-SATURATED ASBESTOS FELT USED IN ROOFING AND WATERPROOFING
  • ASTM D2500 : EN-Standard Test Method for Cloud Point of Petroleum Products-British Standard 4458; IP: 219/82
  • ASTM D2500 REV A : EN-Standard Test Method for Cloud Point of Petroleum Products-IP Designation: 219/94; British Standard 4458
  • ASTM D2501 : EN-STANDARD TEST METHOD FOR CALCULATION OF VISCOSITY-GRAVITY CONSTANT (VGC) OF PETROLEUM OILS
  • ASTM D2502 : EN-Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
  • ASTM D2503 : EN-Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2504 : EN-Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
  • ASTM D2505 : EN-STANDARD TEST METHOD FOR ETHYLENE OTHER HYDROCARBONS AND CARBON DIOXIDE IN HIGH-PURITY ETHYLENE BY GAS CHROMATOGRAPHY
  • ASTM D2506 : EN-Standard Terminology Relating to Solid Rocket Propulsion
  • ASTM D2507 : EN-Standard Terminology of Rheological Properties of Gelled Rocket Propellants
  • ASTM D2508 : EN-STANDARD PRACTICE FOR SOLID ROCKET PROPELLANT SPECIFIC IMPULSE MEASUREMENTS (R 1980) (E1-1984)
  • ASTM D2509 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF LOAD- CARRYING CAPACITY OF LUBRICATING GREASE (TIMKEN METHOD) (IP 326/83)
  • ASTM D2510 : EN-STANDARD TEST METHOD FOR ADHESION OF SOLID FILM LUBRICANTS
  • ASTM D2511 : EN-Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
  • ASTM D2512 : EN-Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
  • ASTM D2513 : EN-Standard Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings
  • ASTM D2513 REV A : EN-Standard Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings
  • ASTM D2513 REV B : EN-Standard Specification for Thermoplastic Gas Pressure Pipe Tubing and Fittings
  • ASTM D2513 REV C : EN-STANDARD SPECIFICATION FOR THERMOPLASTIC GAS PRESSURE PIPE TUBING AND FITTINGS
  • ASTM D2517 : EN-Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • ASTM D2518 : EN-STANDARD SPECIFICATION FOR WOVEN GLASS FABRICS FOR ELECTRICAL INSULATION
  • ASTM D2519 : EN-Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
  • ASTM D2520 : EN-Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 Degrees C
  • ASTM D2521 : EN-Standard Specification for Asphalt Used in Canal Ditch and Pond Lining
  • ASTM D2522 : EN-Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
  • ASTM D2523 : EN-Standard Practice for Testing Load-Strain Properties of Roofing Membranes
  • ASTM D2524 : EN-Standard Test Method for Breaking Tenacity of Wool Fibers Flat Bundle Method – 1/8-in. (3.2-mm) Gage Length
  • ASTM D2525 : EN-Standard Practice for Sampling Wool for Moisture
  • ASTM D2526 : EN-Standard Specification for Ozone-Resisting Silicone Rubber Insulation for Wire and Cable
  • ASTM D2527 : EN-Standard Specification for Rubber Seals-Splice Strength
  • ASTM D2529 : EN-STANDARD TEST METHOD FOR BURSTING STRENGTH OF PAPERBOARD AND LINERBOARD
  • ASTM D2530 : EN-STANDARD SPECIFICATION FOR NONORIENTED PROPYLENE PLASTIC FILM
  • ASTM D2532 : EN-Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
  • ASTM D2533 : EN-STANDARD TEST METHOD FOR VAPOR-LIQUID RATIO OF GASOLINE
  • ASTM D2533 REV A : EN-STANDARD TEST METHOD FOR VAPOR-LIQUID RATIO OF SPARK-IGNITION ENGINE FUELS
  • ASTM D2534 : EN-Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
  • ASTM D2538 : EN-STANDARD PRACTICE FOR FUSION OF POLY(VINYL CHLORIDE) (PVC) COMPOUNDS USING A TORQUE RHEOMETER
  • ASTM D2539 : EN-STANDARD TEST METHOD FOR SHOCK SENSITIVITY OF LIQUID MONOPROPELLANTS BY THE CARD-GAP TEST (R 1980)
  • ASTM D2540 : EN-Standard Test Method for Drop-Weight Sensitivity of Liquid Monopropellants
  • ASTM D2541 : EN-Standard Test Method for Critical Diameter and Detonation Velocity of Liquid Monopropellants
  • ASTM D2547 : EN-STANDARD TEST METHOD FOR LEAD IN GASOLINE VOLUMETRIC CHROMATE METHOD
  • ASTM D2549 : EN-Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
  • ASTM D255 : EN-STANDARD METHOD FOR STEAM DISTILLATION OF BITUMINOUS PROTECTIVE COATINGS (R 1982) (E1-1982)
  • ASTM D2550 : EN-STANDARD TEST METHOD FOR WATER SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS
  • ASTM D2551 : EN-STANDARD TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MICROMETHOD)
  • ASTM D2552 : EN-STANDARD TEST METHOD FOR ENVIRONMENTAL STRESS RUPTURE OF TYPE III POLYETHYLENES UNDER CONSTANT TENSILE LOAD
  • ASTM D2553 : EN-STANDARD TEST METHOD FOR DETECTING ODOR OF DRYCLEANING DETERGENT ON A DRYCLEANED GARMENT (R 1986)
  • ASTM D2554 : EN-STANDARD TEST METHOD FOR FLASH POINT OF DRYCLEANING DETERGENTS IN THE DRYCLEANING BATH
  • ASTM D2555 : EN-Standard Practice for Establishing Clear Wood Strength Values
  • ASTM D2555 REV A : EN-Standard Practice for Establishing Clear Wood Strength Values
  • ASTM D2556 : EN-STANDARD TEST METHOD FOR APPARENT VISCOSITY OF ADHESIVES HAVING SHEAR- RATE-DEPENDENT FLOW PROPERTIES
  • ASTM D2556 REV A : EN-Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
  • ASTM D2557 : EN-Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55 Degrees C (-450 to -67 Degrees F)
  • ASTM D2558 : EN-STANDARD TEST METHOD FOR EVALUATING PEEL STRENGTH OF SHOE SOLE-ATTACHING ADHESIVES
  • ASTM D2559 : EN-Standard Specification for Adhesives for Structural Laminated Wood Products for Use under Exterior (Wet Use) Exposure Conditions
  • ASTM D2559 REV A : EN-Standard Specification for Adhesives for Structural Laminated Wood Products for Use under Exterior (Wet Use) Exposure Conditions
  • ASTM D256 : EN-Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • ASTM D256 REV A : EN-Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • ASTM D256 REV B : EN-STANDARD TEST METHODS FOR IMPACT RESISTANCE OF PLASTICS AND ELECTRICAL INSULATING MATERIALS
  • ASTM D2560 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENTS FOR CELLULOSE ACETATE BUTYRATE (CAB) PLASTIC PIPE TUBING AND FITTINGS
  • ASTM D2561 : EN-STANDARD TEST METHOD FOR ENVIRONMENTAL STRESS-CRACK RESISTANCE OF BLOW-MOLDED POLYETHYLENE CONTAINERS (R 1989)
  • ASTM D2562 : EN-Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
  • ASTM D2563 : EN-Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
  • ASTM D2564 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENTS FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPING SYSTEMS
  • ASTM D255 : EN-STANDARD METHOD FOR STEAM DISTILLATION OF BITUMINOUS PROTECTIVE COATINGS (R 1982) (E1-1982)
  • ASTM D2550 : EN-STANDARD TEST METHOD FOR WATER SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS
  • ASTM D2551 : EN-STANDARD TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MICROMETHOD)
  • ASTM D2552 : EN-STANDARD TEST METHOD FOR ENVIRONMENTAL STRESS RUPTURE OF TYPE III POLYETHYLENES UNDER CONSTANT TENSILE LOAD
  • ASTM D2553 : EN-STANDARD TEST METHOD FOR DETECTING ODOR OF DRYCLEANING DETERGENT ON A DRYCLEANED GARMENT (R 1986)
  • ASTM D2554 : EN-STANDARD TEST METHOD FOR FLASH POINT OF DRYCLEANING DETERGENTS IN THE DRYCLEANING BATH
  • ASTM D2555 : EN-Standard Practice for Establishing Clear Wood Strength Values
  • ASTM D2555 REV A : EN-Standard Practice for Establishing Clear Wood Strength Values
  • ASTM D2556 : EN-STANDARD TEST METHOD FOR APPARENT VISCOSITY OF ADHESIVES HAVING SHEAR- RATE-DEPENDENT FLOW PROPERTIES
  • ASTM D2556 REV A : EN-Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties
  • ASTM D2557 : EN-Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55 Degrees C (-450 to -67 Degrees F)
  • ASTM D2558 : EN-STANDARD TEST METHOD FOR EVALUATING PEEL STRENGTH OF SHOE SOLE-ATTACHING ADHESIVES
  • ASTM D2559 : EN-Standard Specification for Adhesives for Structural Laminated Wood Products for Use under Exterior (Wet Use) Exposure Conditions
  • ASTM D2559 REV A : EN-Standard Specification for Adhesives for Structural Laminated Wood Products for Use under Exterior (Wet Use) Exposure Conditions
  • ASTM D256 : EN-Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • ASTM D256 REV A : EN-Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • ASTM D256 REV B : EN-STANDARD TEST METHODS FOR IMPACT RESISTANCE OF PLASTICS AND ELECTRICAL INSULATING MATERIALS
  • ASTM D2560 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENTS FOR CELLULOSE ACETATE BUTYRATE (CAB) PLASTIC PIPE TUBING AND FITTINGS
  • ASTM D2561 : EN-STANDARD TEST METHOD FOR ENVIRONMENTAL STRESS-CRACK RESISTANCE OF BLOW-MOLDED POLYETHYLENE CONTAINERS (R 1989)
  • ASTM D2562 : EN-Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
  • ASTM D2563 : EN-Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
  • ASTM D2564 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENTS FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC PIPING SYSTEMS
  • ASTM D2564 REV A : EN-Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
  • ASTM D2565 : EN-STANDARD PRACTICE FOR OPERATING XENON ARC-TYPE (WATER-COOLED) LIGHT- EXPOSURE APPARATUS WITH AND WITHOUT WATER FOR EXPOSURE OF PLASTICS
  • ASTM D2565 REV A : EN-Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus with and without Water for Exposure of Plastics
  • ASTM D2566 : EN-LINEAR SHRINKAGE OF CURED THERMOSETTING CASTING RESINS DURING CURE TEST METHOD FOR
  • ASTM D2569 : EN-Standard Test Method for Distillation of Pitch
  • ASTM D257 : EN-Standard Test Methods for DC Resistance or Conductance of Insulating Materials
  • ASTM D2570 : EN-Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • ASTM D2571 : EN-STANDARD GUIDE FOR TESTING WOOD FURNITURE LACQUERS
  • ASTM D2572 : EN-STANDARD TEST METHOD FOR ISOCYANATE GROUPS IN URETHANE MATERIALS OR PREPOLYMERS
  • ASTM D2573 : EN-Standard Test Method for Field Vane Shear Test in Cohesive Soil
  • ASTM D2574 : EN-Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
  • ASTM D2575 : EN-Standard Methods of Testing Polymerized Fatty Acids
  • ASTM D2577 : EN-STANDARD TEST METHOD FOR RADIOACTIVE CESIUM IN WATER
  • ASTM D2578 : EN-Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
  • ASTM D2578 REV A : EN-Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
  • ASTM D2579 : EN-Standard Test Method for Total Organic Carbon in Water
  • ASTM D2580 : EN-STANDARD TEST METHOD FOR PHENOLS IN WATER BY GAS- LIQUID CHROMATOGRAPHY
  • ASTM D2581 : EN-STANDARD SPECIFICATION FOR POLYBUTYLENE (PB) PLASTICS MOLDING AND EXTRUSION MATERIALS
  • ASTM D2582 : EN-Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
  • ASTM D2583 : EN-STANDARD TEST METHOD FOR INDENTATION HARDNESS OF RIGID PLASTICS BY MEANS OF A BARCOL IMPRESSOR
  • ASTM D2584 : EN-STANDARD TEST METHOD FOR IGNITION LOSS OF CURED REINFORCED RESINS (R 1985)
  • ASTM D2585 : EN-Standard Test Method for Preparation and Tension Testing of Filament-Wound Pressure Vessels
  • ASTM D2586 : EN-Standard Test Method for Hydrostatic Compressive Strength of Glass-Reinforced Plastic Cylinders
  • ASTM D2587 : EN-STANDARD TEST METHOD FOR ACETONE EXTRACTION AND IGNITION OF GLASS FIBER STRANDS YARNS AND ROVING FOR REINFORCED PLASTICS
  • ASTM D2589 : EN-Standard Test Method for McNett Wet Classification of Asbestos Fiber
  • ASTM D259 : EN-STANDARD SPECIFICATION FOR WOVEN TAPES
  • ASTM D2590 : EN-Standard Test Method for Sampling Chrysotile Asbestos
  • ASTM D2591 : EN-Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
  • ASTM D2593 : EN-Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography-IP Designation: 194/74(81)
  • ASTM D2594 : EN-Standard Test Methods for Stretch Properties of Knitted Fabrics Having Low Power-Discontinued 1997; IHS Notified 12/1998
  • ASTM D2594 REV A : EN-Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power
  • ASTM D2595 : EN-STANDARD TEST METHOD FOR EVAPORATION LOSS OF LUBRICATING GREASES OVER WIDE-TEMPERATURE RANGE (R 1985)
  • ASTM D2596 : EN-Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2597 : EN-Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
  • ASTM D2598 : EN-Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
  • ASTM D2599 : EN-STANDARD TEST METHOD FOR LEAD IN GASOLINE BY X-RAY SPECTROMETRY
  • ASTM D260 : EN-STANDARD SPECIFICATION FOR BOILED LINSEED OIL
  • ASTM D2600 : EN-STANDARD TEST METHOD FOR AROMATIC TRACES IN LIGHT SATURATED HYDROCARBONS BY GAS CHROMATOGRAPHY
  • ASTM D2601 : EN-STANDARD TEST METHOD FOR HYDROCARBON TYPES IN PROPYLENE TETRAMER BY LOW-IONIZING VOLTAGE MASS SPECTROMETRY
  • ASTM D2602 : EN-STANDARD TEST METHOD FOR APPARENT VISCOSITY OF ENGINE OILS AT LOW TEMPERATURE USING THE COLD-CRANKING SIMULATOR (R 1980)
  • ASTM D2603 : EN-Test Method for Sonic Shear Stability of Polymer-Containing Oils
  • ASTM D2604 : EN-STANDARD SPECIFICATION FOR HIGH-BOILING HYDROCARBON SOLVENT FOR PREPARING OIL-BORNE PRESERVATIVE SOLUTIONS
  • ASTM D2605 : EN-STANDARD SPECIFICATION FOR VOLATILE PETROLEUM SOLVENT (LPG) FOR PREPARING PENTACHLOROPHENOL SOLUTIONS
  • ASTM D2606 : EN-STANDARD TEST METHOD FOR SOLUBILITY OF PENTACHLOROPHENOL IN HEAVY HYDROCARBON SOLVENTS (R 1992) (E1-1992)
  • ASTM D2607 : EN-STANDARD CLASSIFICATION OF PEATS MOSSES HUMUS AND RELATED PRODUCTS
  • ASTM D2608 : EN-STANDARD TEST METHOD FOR COPPER IN ELECTRICAL INSULATING OILS BY PHOTOMETRIC ANALYSIS
  • ASTM D2609 : EN-STANDARD SPECIFICATION FOR PLASTIC INSERT FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE
  • ASTM D2609 REV A : EN-STANDARD SPECIFICATION FOR PLASTIC INSERT FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE
  • ASTM D261 : EN-Standard Specification for Iron Blue Pigment
  • ASTM D2612 : EN-STANDARD TEST METHOD FOR FIBER COHESION IN SLIVER AND TOP IN STATIC TESTS
  • ASTM D2612 REV A : EN-Standard Test Method for Fiber Cohesion in Silver and Top in Static Tests
  • ASTM D2613 : EN-Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
  • ASTM D2616 : EN-STANDARD TEST METHOD FOR EVALUATION OF VISUAL COLOR DIFFERENCE WITH A GRAY SCALE
  • ASTM D2617 : EN-STANDARD TEST METHOD FOR TOTAL ASH IN LEATHER (R 1991) (AMERICAN LEATHER CHEMISTS ASSN. STANDARD METHOD B 15 – 1969)
  • ASTM D2619 : EN-Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
  • ASTM D262 : EN-Standard Specification for Ultramarine Blue Pigment
  • ASTM D2620 : EN-STANDARD TEST METHOD FOR LIGHT STABILITY OF CLEAR COATINGS (R 1981) (E1-1981)
  • ASTM D2621 : EN-STANDARD TEST METHOD FOR INFRARED IDENTIFICATION OF VEHICLE SOLIDS FROM SOLVENT-TYPE PAINTS (R 1981) (E1-1981)
  • ASTM D2622 : EN-Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry
  • ASTM D2623 : EN-STANDARD TEST METHOD FOR KNOCK CHARACTERISTICS OF LIQUEFIED PETROLEUM (LP) GASES BY THE MOTOR (LP) METHOD
  • ASTM D2624 : EN-STANDARD TEST METHODS FOR ELECTRICAL CONDUCTIVITY OF AVIATION AND DISTILLATE FUELS CONTAINING A STATIC DISSIPATOR ADDITIVE (IP 274/83)
  • ASTM D2624 REV A : EN-Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D2625 : EN-Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
  • ASTM D2626 : EN-Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
  • ASTM D2626 REV A : EN-Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
  • ASTM D2626 REV B : EN-Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
  • ASTM D2627 : EN-Standard Specification for Diacetone Alcohol
  • ASTM D2628 : EN-Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
  • ASTM D263 : EN-Standard Specification for Chrome Oxide Green Pigment
  • ASTM D2630 : EN-STANDARD TEST METHOD FOR RUBBER PROPERTY – ADHESION TO FABRICS (STRAP PEEL TEST) (E1-1987)
  • ASTM D2632 : EN-Standard Test Method for Rubber Property – Resilience by Vertical Rebound
  • ASTM D2633 : EN-Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
  • ASTM D2634 : EN-Standard Specification for Methyl Amyl Acetate (95% Grade)
  • ASTM D2635 : EN-Standard Specification for Methyl Isobutyl Carbinol
  • ASTM D2636 : EN-STANDARD SPECIFICATION FOR HEXYLENE GLYCOL
  • ASTM D2638 : EN-Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM D2639 : EN-STANDARD TEST METHOD FOR PLASTIC PROPERTIES OF COAL BY THE CONSTANT- TORQUE GIESELER PLASTOMETER
  • ASTM D2641 : EN-STANDARD TEST METHOD FOR CHLORINE IN CELLULOSE (R 1985) (E1-1985)
  • ASTM D2643 : EN-Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
  • ASTM D2643 REV A : EN-Standard Specification for Prefabricated Asphalt Reservoir Pond Canal and Ditch Liner (Exposed Type)
  • ASTM D2644 : EN-Standard Tolerances for Yarns Spun on the Woolen System
  • ASTM D2645 : EN-Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
  • ASTM D2646 : EN-STANDARD METHODS OF TESTING BACKING FABRICS
  • ASTM D2647 : EN-Standard Specification for Crosslinkable Ethylene Plastics
  • ASTM D2647 REV A : EN-Standard Specification for Crosslinkable Ethylene Plastics
  • ASTM D2649 : EN-Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
  • ASTM D2650 : EN-Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
  • ASTM D2651 : EN-Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
  • ASTM D2652 : EN-Standard Terminology Relating to Activated Carbon
  • ASTM D2652 REV A : EN-Standard Terminology Relating to Activated Carbon
  • ASTM D2653 : EN-Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • ASTM D2654 : EN-STANDARD TEST METHODS FOR MOISTURE CONTENT AND MOISTURE REGAIN OF TEXTILES-(Discontinued 1998; No Replacement)
  • ASTM D2654 REV A : EN-Standard Test Methods for Moisture in Textiles
  • ASTM D2655 : EN-STANDARD SPECIFICATION FOR CROSSLINKED POLYETHYLENE INSULATION FOR WIRE AND CABLE RATED 0 TO 2000 V
  • ASTM D2656 : EN-STANDARD SPECIFICATION FOR CROSSLINKED POLYETHYLENE INSULATION FOR WIRE AND CABLE RATED 2001 TO 35 000 V
  • ASTM D2657 : EN-Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
  • ASTM D2658 : EN-Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
  • ASTM D2659 : EN-Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
  • ASTM D2660 : EN-STANDARD TEST METHOD FOR FINISH CONTENT OF WOVEN GLASS FABRIC CLEANED AND AFTER-FINISHED WITH ACRYLIC-SILANE-TYPE FINISHES FOR PLASTIC LAMINATES
  • ASTM D2661 : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain Waste and Vent Pipe and Fittings
  • ASTM D2661 REV A : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) PLASTIC DRAIN WASTE AND VENT PIPE AND FITTINGS (AASHTO NO. M265-81)
  • ASTM D2662 : EN-STANDARD SPECIFICATION FOR POLYBUTYLENE (PB) PLASTIC PIPE (SIDR-PR) BASED ON CONTROLLED INSIDE DIAMETER
  • ASTM D2662 REV A : EN-Standard Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
  • ASTM D2663 : EN-STANDARD TEST METHODS FOR CARBON BLACK – DISPERSION IN RUBBER
  • ASTM D2663 REV A : EN-Standard Test Methods for Carbon Black – Dispersion in Rubber
  • ASTM D2664 : EN-STANDARD TEST METHOD FOR TRIAXIAL COMPRESSIVE STRENGTH OF UNDRAINED ROCK CORE SPECIMENS WITHOUT PORE PRESSURE MEASUREMENTS
  • ASTM D2664 REV A : EN-Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
  • ASTM D2665 : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain Waste and Vent Pipe and Fittings
  • ASTM D2665 REV A : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain Waste and Vent Pipe and Fittings
  • ASTM D2665 REV B : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain Waste and Vent Pipe and Fittings
  • ASTM D2666 : EN-Standard Specification for Polybutylene (PB) Plastic Tubing
  • ASTM D2666 REV A : EN-Standard Specification for Polybutylene (PB) Plastic Tubing
  • ASTM D2667 : EN-Standard Test Method for Biodegradability of Alkylbenzene Sulfonates
  • ASTM D2668 : EN-Standard Test Method for 26-Ditertiary-Butyl Para Cresol and 26-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
  • ASTM D2669 : EN-Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)-No Replacement
  • ASTM D267 : EN-Standard Specification for Gold Bronze Powder
  • ASTM D2670 : EN-STANDARD METHOD FOR MEASURING WEAR PROPERTIES OF FLUID LUBRICANTS (FALEX PIN AND VEE BLOCK METHOD)
  • ASTM D2671 : EN-Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
  • ASTM D2671 REV A : EN-STANDARD TEST METHODS FOR HEAT-SHRINKABLE TUBING FOR ELECTRICAL USE
  • ASTM D2672 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENT JOINT SOCKETS ON BELLED PVC PRESSURE PIPE
  • ASTM D2672 REV A : EN-STANDARD SPECIFICATION FOR JOINTS FOR IPS PVC PIPE USING SOLVENT CEMENT
  • ASTM D2673 : EN-STANDARD SPECIFICATION FOR ORIENTED POLYPROPYLENE FILM
  • ASTM D2673 REV A : EN-Standard Specification for Oriented Polypropylene Film
  • ASTM D2674 : EN-Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
  • ASTM D2675 : EN-STANDARD TEST METHOD FOR COPPER IN INSULATING OILS SPECTROCHEMICALLY BY THE SOLUTION-ROTATING DISK METHOD
  • ASTM D2677 : EN-STANDARD TEST METHOD FOR LIGHTABILITY OF BARBECUE BRIQUETS
  • ASTM D2678 : EN-STANDARD PRACTICE FOR SPINNING TESTS ON THE COTTON SYSTEM FOR MEASUREMENT OF YARN PROPERTIES
  • ASTM D2679 : EN-STANDARD TEST METHOD FOR ELECTROSTATIC CHARGE (R 1978)
  • ASTM D268 : EN-STANDARD GUIDE FOR SAMPLING AND TESTING VOLATILE SOLVENTS AND CHEMICAL INTERMEDIATES FOR USE IN PAINT AND RELATED COATINGS AND MATERIAL (R 1993) (E1-1993)
  • ASTM D2680 : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) AND POLY(VINYL CHLORIDE) (PVC) COMPOSITE SEWER PIPING (AASHTO M264)
  • ASTM D2680 REV A : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) AND POLY(VINYL CHLORIDE) (PVC) COMPOSITE SEWER PIPING
  • ASTM D2683 : EN-Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
  • ASTM D2683 REV A : EN-STANDARD SPECIFICATION FOR SOCKET-TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER- CONTROLLED POLYETHYLENE PIPE AND TUBING
  • ASTM D2684 : EN-Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
  • ASTM D2685 : EN-Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
  • ASTM D2686 : EN-STANDARD SPECIFICATION FOR TETRAFLUOROETHYLENE- BACKED PRESSURE- SENSITIVE ELECTRICAL INSULATING TAPE
  • ASTM D2687 : EN-Standard Practices for Sampling Particulate Ion-Exchange Materials
  • ASTM D2688 : EN-STANDARD TEST METHODS FOR CORROSIVITY OF WATER IN THE ABSENCE OF HEAT TRANSFER (WEIGHT LOSS METHODS)
  • ASTM D2689 : EN-STANDARD PRACTICES FOR TESTING ALKYD RESINS
  • ASTM D269 : EN-STANDARD TEST METHOD FOR TOLUENE-INSOLUBLE SOLID MATTER IN ROSIN (CHIEFLY SAND CHIPS DIRT AND BARK) (R-1987) (E1-1987)
  • ASTM D2690 : EN-STANDARD TEST METHOD FOR ISOPHTHALIC ACID IN ALKYD AND POLYESTER RESINS
  • ASTM D2691 : EN-STANDARD TEST METHODS FOR MICROSCOPICAL MEASUREMENT OF DRY FILM THICKNESS OF COATINGS ON WOOD PRODUCTS
  • ASTM D2692 : EN-STANDARD TEST METHOD FOR AIR WICKING OF TIRE FABRICS
  • ASTM D2692/D2692M : EN-Standard Test Method for Air Wicking of Tire Fabrics Tire Cord Fabrics Tire Cord and Yarns
  • ASTM D2693 : EN-Standard Specification for Ethylene Glycol
  • ASTM D2694 : EN-Standard Specification for Diethylene Glycol
  • ASTM D2695 : EN-STANDARD SPECIFICATION FOR PROPYLENE GLYCOL
  • ASTM D2696 : EN-STANDARD SPECIFICATION FOR DIPROPYLENE GLYCOL
  • ASTM D2697 : EN-Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
  • ASTM D2698 : EN-Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
  • ASTM D2699 : EN-STANDARD TEST METHOD FOR KNOCK CHARACTERISTICS OF MOTOR FUELS BY THE RESEARCH METHOD (IP 237/69)
  • ASTM D2699 REV A : EN-STANDARD TEST METHOD FOR KNOCK CHARACTERISTICS OF MOTOR FUELS BY THE RESEARCH METHOD (IP 237/69) (E1-1988)
  • ASTM D270 : EN-Standard Method of Sampling Petroleum and Petroleum Products
  • ASTM D2700 : EN-Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel-IP Designation: 236; E1-1999
  • ASTM D2700 REV A : EN-STANDARD TEST METHOD FOR KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS BY THE MOTOR METHOD (IP 236/83)
  • ASTM D2700 REV B : EN-STANDARD TEST METHOD FOR MOTOR OCTANE NUMBER OF SPARK-IGNITION ENGINE FUEL
  • ASTM D2702 : EN-STANDARD PRACTICE FOR RUBBER CHEMICALS – DETERMINATION OF INFRARED ABSORPTION CHARACTERISTICS
  • ASTM D2703 : EN-STANDARD PRACTICE FOR RUBBER CHEMICALS – DETERMINATION OF ULTRAVIOLET ABSORBANCE CHARACTERISTICS
  • ASTM D2707 : EN-STANDARD METHOD OF TESTING HARD RUBBER IN TENSION
  • ASTM D2709 : EN-Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
  • ASTM D2710 : EN-STANDARD TEST METHOD FOR BROMINE INDEX OF PETROLEUM HYDROCARBONS BY ELECTROMETRIC TITRATION
  • ASTM D2710 REV A : EN-STANDARD TEST METHOD FOR BROMINE INDEX OF PETROLEUM HYDROCARBONS BY ELECTROMETRIC TITRATION (IP 299/78) (E1-1985)
  • ASTM D2711 : EN-Standard Test Method for Demulsibility Characteristics of Lubricating Oils
  • ASTM D2711 REV A : EN-Standard Test Method for Demulsibility Characteristics of Lubricating Oils
  • ASTM D2712 : EN-Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography
  • ASTM D2713 : EN-STANDARD TEST METHOD FOR DRYNESS OF PROPANE (VALVE FREEZE METHOD)
  • ASTM D2714 : EN-STANDARD TEST METHOD FOR CALIBRATION AND OPERATION OF THE FALEX BLOCK-ON-RING FRICTION AND WEAR TESTING MACHINE
  • ASTM D2715 : EN-Standard Test Method for Volatilization Rates of Lubricants in Vacuum
  • ASTM D2717 : EN-STANDARD TEST METHOD FOR THERMAL CONDUCTIVITY OF LIQUIDS
  • ASTM D2718 : EN-Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
  • ASTM D2719 : EN-STANDARD METHODS OF TESTING PLYWOOD IN SHEAR THROUGH-THE- THICKNESS (R 1981) (E1-1981)
  • ASTM D2720 : EN-STANDARD RECOMMENDED PRACTICE FOR CALCULATION OF COMMERICAL WEIGHT AND YIELD OF SCOURED WOOL TOP AND NOIL FOR VARIOUS COMMERCIAL COMPOSITIONS (R 1983) (E1-1983)
  • ASTM D2721 : EN-STANDARD TEST METHOD FOR EFFECTS OF DRYCLEANING ON PERMANENCE OF DURABLE WATER-REPELLENT FINISH
  • ASTM D2724 : EN-Standard Test Methods for Bonded Fused and Laminated Apparel Fabrics
  • ASTM D2725 : EN-Standard Test Method for Hydrogen Sulfide in Natural Gas (Methylene Blue Method)
  • ASTM D2726 : EN-Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726 REV A : EN-Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2728 : EN-Standard Practice for Paving Uses and Application Temperatures for Road Tars
  • ASTM D2729 : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • ASTM D2729 REV A : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS
  • ASTM D2730 : EN-STANDARD TEST METHOD FOR SAG FLOW OF HIGHLY VISCOUS RESINS
  • ASTM D2731 : EN-Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • ASTM D2732 : EN-Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM D2734 : EN-Standard Test Methods for Void Content of Reinforced Plastics
  • ASTM D2736 : EN-Standard Practice for Determination of Hydrostatic Compressive Strength of Syntactic Foam
  • ASTM D2737 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC TUBING
  • ASTM D2737 REV A : EN-Standard Specification for Polyethylene (PE) Plastic Tubing
  • ASTM D2738 : EN-StandaT”d Method 0/ Test lar BURSTING STRENGTH OF CORRUGATED AND SOLID FIBERBOARD
  • ASTM D2739 : EN-Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM D2740 : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC TUBING
  • ASTM D2741 : EN-STANDARD TEST METHOD FOR SUSCEPTIBILITY OF POLYETHYLENE BOTTLES TO SOOT ACCUMULATION
  • ASTM D2742 : EN-Standard Methods for Chemical Analysis of Tribasic Lead Phosphosilicate
  • ASTM D2743 : EN-Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
  • ASTM D2744 : EN-STANDARD SPECIFICATION FOR TRIBASIC LEAD PHOSPHOSILICATE
  • ASTM D2745 : EN-Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
  • ASTM D2746 : EN-Standard Test Method for Staining Tendency of Asphalt (Stain Index)
  • ASTM D2747 : EN-STANDARD TEST METHOD FOR TRACE QUANTITIES OF TOTAL SULFUR IN VOLATILE ORGANIC LIQUIDS (OXY-HYDROGEN COMBUSTION METHODS)
  • ASTM D2748 : EN-STANDARD TEST METHOD FOR PYRIDINE BASES IN TAR ACIDS
  • ASTM D2749 : EN-Standard Symbols for Dimensions of Plastic Pipe Fittings
  • ASTM D2750 : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastics Utilities Conduit and Fittings
  • ASTM D2751 : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) SEWER PIPE AND FITTINGS
  • ASTM D2726 : EN-Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726 REV A : EN-Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2728 : EN-Standard Practice for Paving Uses and Application Temperatures for Road Tars
  • ASTM D2729 : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • ASTM D2729 REV A : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS
  • ASTM D2730 : EN-STANDARD TEST METHOD FOR SAG FLOW OF HIGHLY VISCOUS RESINS
  • ASTM D2731 : EN-Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • ASTM D2732 : EN-Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM D2734 : EN-Standard Test Methods for Void Content of Reinforced Plastics
  • ASTM D2736 : EN-Standard Practice for Determination of Hydrostatic Compressive Strength of Syntactic Foam
  • ASTM D2737 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC TUBING
  • ASTM D2737 REV A : EN-Standard Specification for Polyethylene (PE) Plastic Tubing
  • ASTM D2738 : EN-StandaT”d Method 0/ Test lar BURSTING STRENGTH OF CORRUGATED AND SOLID FIBERBOARD
  • ASTM D2739 : EN-Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM D2740 : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC TUBING
  • ASTM D2741 : EN-STANDARD TEST METHOD FOR SUSCEPTIBILITY OF POLYETHYLENE BOTTLES TO SOOT ACCUMULATION
  • ASTM D2742 : EN-Standard Methods for Chemical Analysis of Tribasic Lead Phosphosilicate
  • ASTM D2743 : EN-Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
  • ASTM D2744 : EN-STANDARD SPECIFICATION FOR TRIBASIC LEAD PHOSPHOSILICATE
  • ASTM D2745 : EN-Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
  • ASTM D2746 : EN-Standard Test Method for Staining Tendency of Asphalt (Stain Index)
  • ASTM D2747 : EN-STANDARD TEST METHOD FOR TRACE QUANTITIES OF TOTAL SULFUR IN VOLATILE ORGANIC LIQUIDS (OXY-HYDROGEN COMBUSTION METHODS)
  • ASTM D2748 : EN-STANDARD TEST METHOD FOR PYRIDINE BASES IN TAR ACIDS
  • ASTM D2749 : EN-Standard Symbols for Dimensions of Plastic Pipe Fittings
  • ASTM D2750 : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastics Utilities Conduit and Fittings
  • ASTM D2751 : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) SEWER PIPE AND FITTINGS
  • ASTM D2726 : EN-Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2726 REV A : EN-Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2728 : EN-Standard Practice for Paving Uses and Application Temperatures for Road Tars
  • ASTM D2729 : EN-Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • ASTM D2729 REV A : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS
  • ASTM D2730 : EN-STANDARD TEST METHOD FOR SAG FLOW OF HIGHLY VISCOUS RESINS
  • ASTM D2731 : EN-Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • ASTM D2732 : EN-Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM D2734 : EN-Standard Test Methods for Void Content of Reinforced Plastics
  • ASTM D2736 : EN-Standard Practice for Determination of Hydrostatic Compressive Strength of Syntactic Foam
  • ASTM D2737 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC TUBING
  • ASTM D2737 REV A : EN-Standard Specification for Polyethylene (PE) Plastic Tubing
  • ASTM D2738 : EN-StandaT”d Method 0/ Test lar BURSTING STRENGTH OF CORRUGATED AND SOLID FIBERBOARD
  • ASTM D2739 : EN-Standard Test Method for Volume Resistivity of Conductive Adhesives
  • ASTM D2740 : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC TUBING
  • ASTM D2741 : EN-STANDARD TEST METHOD FOR SUSCEPTIBILITY OF POLYETHYLENE BOTTLES TO SOOT ACCUMULATION
  • ASTM D2742 : EN-Standard Methods for Chemical Analysis of Tribasic Lead Phosphosilicate
  • ASTM D2743 : EN-Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
  • ASTM D2744 : EN-STANDARD SPECIFICATION FOR TRIBASIC LEAD PHOSPHOSILICATE
  • ASTM D2745 : EN-Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
  • ASTM D2746 : EN-Standard Test Method for Staining Tendency of Asphalt (Stain Index)
  • ASTM D2747 : EN-STANDARD TEST METHOD FOR TRACE QUANTITIES OF TOTAL SULFUR IN VOLATILE ORGANIC LIQUIDS (OXY-HYDROGEN COMBUSTION METHODS)
  • ASTM D2748 : EN-STANDARD TEST METHOD FOR PYRIDINE BASES IN TAR ACIDS
  • ASTM D2749 : EN-Standard Symbols for Dimensions of Plastic Pipe Fittings
  • ASTM D2750 : EN-Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastics Utilities Conduit and Fittings
  • ASTM D2751 : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) SEWER PIPE AND FITTINGS
  • ASTM D2751 REV A : EN-STANDARD SPECIFICATION FOR ACRYLONITRILE- BUTADIENE-STYRENE (ABS) SEWER PIPE AND FITTINGS
  • ASTM D2752 : EN-Standard Test Methods for Air Permeability of Asbestos Fibers
  • ASTM D2753 : EN-STANDARD SPECIFICATION FOR ELECTROLYTIC CAPACITOR PAPER
  • ASTM D2754 : EN-Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
  • ASTM D2755 : EN-Standard Test Method of Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide
  • ASTM D2756 : EN-Standard Test Method for Weight Loss of Electrical Insulating Varnishes
  • ASTM D2757 : EN-STANDARD SPECIFICATION FOR IMPERVIOUS STEATITE CERAMICS FOR ELECTRICAL AND ELECTRONIC APPLICATIONS (R 1981)
  • ASTM D2758 : EN-Standard Test Method for Engine Coolants by Engine Dynamometer
  • ASTM D2759 : EN-STANDARD METHOD FOR SAMPLING GAS FROM A TRANSFORMER UNDER POSITIVE PRESSURE (R 1989)
  • ASTM D276 : EN-STANDARD METHODS FOR IDENTIFICATION OF FIBERS IN TEXTILES
  • ASTM D276 REV A : EN-Standard Test Methods for Identification of Fibers in Textiles
  • ASTM D2760 : EN-Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Paper Chromatographic Method
  • ASTM D2761 : EN-Standard Test Method for Analysis of Sodium Triphosphate by the Simplified Ion Exchange Method
  • ASTM D2762 : EN-STANDARD SPECIFICATION FOR DRYCLEANING DETERGENT NON-CHARGE TYPE
  • ASTM D2763 : EN-STANDARD SPECIFICATION FOR DRYCLEANING DETERGENT LIQUID CHARGE TYPE (R 1989)
  • ASTM D2764 : EN-Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • ASTM D2765 : EN-STANDARD TEST METHODS FOR DETERMINATION OF GEL CONTENT AND SWELL RATIO OF CROSSLINKED ETHYLENE PLASTICS
  • ASTM D2766 : EN-Standard Test Method for Specific Heat of Liquids and Solids
  • ASTM D2768 : EN-STANDARD SPECIFICATION FOR GENERAL-PURPOSE ETHYLENE-PROPYLENE RUBBER JACKET FOR WIRE AND CABLE
  • ASTM D2769 : EN-STANDARD METHOD FOR TESTING RUBBER HOSE USED FOR LIQUIFIED PETROLEUM GAS-EXTRACTABLE MATERIAL
  • ASTM D2770 : EN-Standard Specification for Ozone-Resisting Ethylene-Propylene Rubber Integral Insulation and Jacket for Wire and Cable
  • ASTM D2771 : EN-STANDARD TEST METHODS FOR COMPACTION DENSITY OF ELECTRICAL GRADE MAGNESIUM OXIDE
  • ASTM D2772 : EN-Standard Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide
  • ASTM D2773 : EN-Standard Test Method for Loss on Ignition of Electrical Grade Magnesium Oxide
  • ASTM D2774 : EN-STANDARD RECOMMENDED PRACTICE FOR UNDERGROUND INSTALLATION OF THERMOPLASTIC PRESSURE PIPING (R 1983)
  • ASTM D2776 : EN-STANDARD TEST METHODS FOR CORROSIVITY OF WATER IN THE ABSENCE OF HEAT TRANSFER (ELECTRICAL METHODS)
  • ASTM D2777 : EN-Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D-19 on Water
  • ASTM D2779 : EN-STANDARD TEST METHOD FOR ESTIMATION OF SOLUBILITY OF GASES IN PETROLEUM LIQUIDS
  • ASTM D2780 : EN-STANDARD TEST METHOD FOR SOLUBILITY OF FIXED GASES IN LIQUIDS
  • ASTM D2781 : EN-STANDARD TEST METHOD FOR COMPATIBILITY OF FUEL OIL BLENDS BY SPOT TEST
  • ASTM D2782 : EN-Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)-IP Designation: 240/84
  • ASTM D2783 : EN-Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2784 : EN-Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (PNS 390:1991)
  • ASTM D2785 : EN-STANDARD TEST METHOD FOR TRACE QUANTITIES OF TOTAL SULFUR (WICKBOLD AND BECKMAN COMBUSTION APPARATUS)
  • ASTM D2786 : EN-Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D2789 : EN-Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
  • ASTM D279 : EN-Standard Test Methods for Bleeding of Pigments
  • ASTM D2790 : EN-STANDARD METHODS OF ANALYSIS OF SOLVENT SYSTEMS USED FOR REMOVAL OF WATER- FORMED DEPOSITS
  • ASTM D2791 : EN-STANDARD TEST METHOD FOR CONTINUOUS DETERMINATION OF SODIUM IN WATER
  • ASTM D2792 : EN-Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
  • ASTM D2793 : EN-Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
  • ASTM D2793 REV A : EN-Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
  • ASTM D2794 : EN-STANDARD TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
  • ASTM D2795 : EN-STANDARD METHODS OF ANALYSIS OF COAL AND COKE ASH
  • ASTM D2796 : EN-STANDARD TERMINOLOGY RELATING TO MEGASCOPIC DESCRIPTION OF COAL AND COAL SEAMS AND MICROSCOPICAL DESCRIPTION AND ANALYSIS OF COAL
  • ASTM D2797 : EN-Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
  • ASTM D2797/D2797M : EN-Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
  • ASTM D2798 : EN-Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite in a Polished Specimen of Coal
  • ASTM D2798 REV A : EN-Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
  • ASTM D2799 : EN-Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
  • ASTM D2799 REV A : EN-Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
  • ASTM D280 : EN-Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile under the Test Conditions) in Pigments
  • ASTM D2800 : EN-STANDARD TEST METHOD FOR PREPARATION OF METHYL ESTERS FROM OILS FOR DETERMINATION OF FATTY ACID COMPOSITION BY GAS- LIQUID CHROMATOGRAPHY
  • ASTM D2801 : EN-STANDARD TEST METHOD FOR LEVELING CHARACTERISTICS OF PAINTS BY DRAW-DOWN METHOD (R 1981) (DISCONTINUED) (E1 1981)
  • ASTM D2802 : EN-Standard Specification for Ozone-Resistant Ethylene-Propylene Rubber Insulation for Wire and Cable
  • ASTM D2803 : EN-Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal-(Discontinued 2002; No Replacement)
  • ASTM D2804 : EN-Standard Test Method for Purity of Methyl Ethyl Ketone by Gas Chromatography
  • ASTM D2805 : EN-Standard Test Method for Hiding Power of Paints by Reflectometry
  • ASTM D2805 REV A : EN-Standard Test Method for Hiding Power of Paints by Reflectometry
  • ASTM D2807 : EN-Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
  • ASTM D2808 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD (SHORT COLUMN TEST)
  • ASTM D2809 : EN-Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
  • ASTM D281 : EN-Standard Test Method for Oil Absorption of Pigments by Spatula Rub-Out
  • ASTM D2810 : EN-Standard Test Method for pH of Leather
  • ASTM D2812 : EN-Standard Test Method for Non-Lint Content of Cotton
  • ASTM D2813 : EN-Standard Practice for Sampling Leather for Physical and Chemical Tests
  • ASTM D2816 : EN-Standard Test Method for Cashmere Coarse-Hair Content in Cashmere
  • ASTM D2817 : EN-Standard Specification for Maximum Cashmere Coarse-Hair Content in Cashmere
  • ASTM D2818 : EN-STANDARD SPECIFICATION FOR PERFORATED HOMOGENEOUS BITUMINIZED FIBER PIPE FOR AIRPORT AND HIGHWAY DRAINAGE
  • ASTM D2820 : EN-STANDARD METHOD OF TEST FOR C1 THROUGH C5 HYDROCARBONS IN THE ATMOSPHERE BY GAS CHROMATOGRAPHY
  • ASTM D2821 : EN-Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • ASTM D2822 : EN-STANDARD SPECIFICATION FOR ASPHALT ROOF CEMENT
  • ASTM D2823 : EN-Standard Specification for Asphalt Roof Coatings Asbestos-Containing
  • ASTM D2824 : EN-Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings Non-Fibered Asbestos Fibered and Fibered Without Asbestos
  • ASTM D2825 : EN-Standard Terminology Relating to Polishes and Related Materials
  • ASTM D2827 : EN-Standard Specification for Styrene Monomer
  • ASTM D2828 : EN-Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements Sawable Type
  • ASTM D2829 : EN-Standard Practice for Sampling and Analysis of Built-Up Roofs
  • ASTM D283 : EN-Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
  • ASTM D2830 : EN-STANDARD TEST METHOD FOR DURABILITY AND COMPATIBILITY OF FACTORY-PRIMED WOOD PRODUCTS WITH REPRESENTATIVE FINISH COATS (R 1987)
  • ASTM D2832 : EN-Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
  • ASTM D2833 : EN-STANDARD INDEX OF METHODS FOR TESTING ARCHITECTURAL PAINTS AND COATINGS
  • ASTM D2834 : EN-Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes Solvent-Based Floor Polishes and Polymer-Emulsion Floor Polishes
  • ASTM D2835 : EN-Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
  • ASTM D2837 : EN-Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
  • ASTM D2837 REV A : EN-Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
  • ASTM D2838 : EN-Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
  • ASTM D2839 : EN-Standard Test Method for Use of a Melt Index Strand for Determining Density of Polyethylene
  • ASTM D284 : EN-Standard Test Methods for Chemical Analysis of Mercuric Oxide Pigment
  • ASTM D2840 : EN-Standard Method of Test for Average True Particle Density of Hollow Microspheres
  • ASTM D2841 : EN-Standard Practice for Sampling Hollow Microspheres
  • ASTM D2842 : EN-Standard Test Method for Water Absorption of Rigid Cellular Plastics

ASTM A , ASTM B ,  ASTM C ,  ASTM D 1 || 2 || 3 || 4 |5 |6 || 7 |8 | , ASTM E ASTM F , ASTM G