STD-ASTM D XXXX Conti 3

ASTM A , ASTM B , ASTM C , ASTM D | 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 | , ASTM E , ASTM F , ASTM G

ASTM D2843 : EN-Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2844 : EN-Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
ASTM D2845 : EN-Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
ASTM D2846 : EN-STANDARD SPECIFICATION FOR CHLORINATED POLY (VINYL CHLORIDE) (CPVC) PLASTIC HOT- AND COLD- WATER DISTRIBUTION SYSTEMS
ASTM D2846 REV A : EN-STANDARD SPECIFICATION FOR CHLORINATED POLY (VINYL CHLORIDE) (CPVC) PLASTIC HOT- AND COLD- WATER DISTRIBUTION SYSTEMS
ASTM D2846/D2846M : EN-Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
ASTM D2846/D2846M REV A : EN-Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
ASTM D2846/D2846M REV B : EN-Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
ASTM D2847 : EN-STANDARD PRACTICE FOR TESTING ENGINE COOLANTS IN CAR AND LIGHT TRUCK SERVICE
ASTM D2847 REV A : EN-Standard Practice for Testing Engine Coolants in Car and Light Truck Service
ASTM D2849 : EN-STANDARD METHODS OF TESTING URETHANE FOAM POLYOL RAW MATERIALS
ASTM D285 : EN-STANDARD METHOD FOR DISTILLATION OF CRUDE PETROLEUM
ASTM D2850 : EN-Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D2850 REV A : EN-Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D2851 : EN-Standard Specification for Liquid Optical Adhesive
ASTM D2852 : EN-STANDARD SPECIFICATION FOR STRYENE-RUBBER (SR) PLASTIC DRAIN PIPE AND FITTINGS
ASTM D2853 : EN-STANDARD SPECIFICATION FOR REINFORCED OLEFIN INJECTION MOLDING AND EXTRUSION MATERIALS
ASTM D2854 : EN-Standard Test Method for Apparent Density of Activated Carbon
ASTM D2855 : EN-Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
ASTM D2856 : EN-STANDARD TEST METHOD FOR OPEN CELL CONTENT OF RIGID CELLULAR PLASTICS BY THE AIR PYCNOMETER
ASTM D2857 : EN-Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D2858 : EN-Standard Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide
ASTM D2859 : EN-STANDARD TEST METHOD FOR FLAMMABILITY OF FINISHED TEXTILE FLOOR COVERING MATERIALS
ASTM D2859 REV A : EN-Standard Test Method for Flammability of Finished Textile Floor Covering Materials
ASTM D2860 : EN-STANDARD TEST METHOD FOR ADHESION OF PRESSURE- SENSITIVE TAPE TO FIBERBOARD AT 90 DEGREE ANGLE AND CONSTANT STRESS
ASTM D2860/D2860M : EN-Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Degrees Angle and Constant Stress
ASTM D2860M : EN-Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Degree Angle and Constant Stress (Metric)
ASTM D2861 : EN-Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM D2862 : EN-Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2863 : EN-STANDARD METHOD OF TEST FOR FLAMMABILITY OF PLASTICS USING THE OXYGEN INDEX METHOD
ASTM D2863 REV A : EN-Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)
ASTM D2864 : EN-STANDARD TERMINOLOGY RELATING TO ELECTRICAL INSULATING LIQUIDS AND GASES
ASTM D2864 REV A : EN-STANDARD TERMINOLOGY RELATING TO ELECTRICAL INSULATING LIQUIDS AND GASES
ASTM D2864 REV B : EN-STANDARD TERMINOLOGY RELATING TO ELECTRICAL INSULATING LIQUIDS AND GASES
ASTM D2865 : EN-STANDARD PRACTICE FOR CALIBRATION OF STANDARDS AND EQUIPMENT FOR ELECTRICAL INSULATING MATERIALS TESTING (R 1990)
ASTM D2865M : EN-Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D2866 : EN-Standard Test Method for Total Ash Content of Activated Carbon
ASTM D2867 : EN-STANDARD TEST METHODS FOR MOISTURE IN ACTIVATED CARBON (R 1988)
ASTM D2868 : EN-Meth of Test for Black Heel Marking Tendencies of Waxes and Polymer Floor Finishes-Withdrawn; No Replacement
ASTM D287 : EN-Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
ASTM D2870 : EN-Standard Test Method for Gel Time of Tar Acids
ASTM D2872 : EN-STANDARD TEST METHOD FOR EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT (ROLLING THIN- FILM OVEN TEST)
ASTM D2873 : EN-Standard Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry
ASTM D2875 : EN-Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
ASTM D2876 : EN-STANDARD TEST METHOD FOR WATER-SOLUBLE MATTER OF VEGETABLE-TANNED LEATHER (R 1988) (AMERICAN LEATHER CHEMISTS ASSN. STANDARD METHOD B8-1954)
ASTM D2878 : EN-STANDARD TEST METHOD FOR ESTIMATING APPARENT VAPOR PRESSURES AND MOLECULAR WEIGHTS OF LUBRICATING OILS
ASTM D2879 : EN-STANDARD TEST METHOD FOR VAPOR PRESSURE- TEMPERATURE RELATIONSHIP AND INITIAL DECOMPOSITION TEMPERATURE OF LIQUIDS BY ISOTENISCOPE
ASTM D2880 : EN-STANDARD SPECIFICATION FOR GAS TURBINE FUEL OILS
ASTM D2880 REV A : EN-STANDARD SPECIFICATION FOR GAS TURBINE FUEL OILS
ASTM D2881 : EN-Standard Classification for Metal Working Fluids and Related Materials
ASTM D2882 : EN-Standard Test Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in Constant Volume Vane Pump
ASTM D2883 : EN-STANDARD TEST METHOD FOR REACTION THRESHOLD TEMPERATURE OF LIQUID AND SOLID MATERIALS
ASTM D2884 : EN-STANDARD TEST METHOD FOR YIELD STRESS OF HETEROGENEOUS PROPELLANTS BY THE CONE PENETRATION METHOD
ASTM D2885 : EN-Standard Test Method for Research and Motor Method Octane Ratings Using on-Line Analyzers (Annexes Included) (IP 360/94)
ASTM D2886 : EN-STANDARD TEST METHOD FOR KNOCK CHARACTERISTICS OF MOTOR FUELS BY THE DISTRIBUTION OCTANE NUMBER (DON) METHOD (ANNEXES INCLUDED)
ASTM D2887 : EN-Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2887 REV A : EN-Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography-IP Designation: 406
ASTM D2889 : EN-STANDARD TEST METHOD FOR CALCULATION OF TRUE VAPOR PRESSURES OF PETROLEUM DISTILLATE FUELS
ASTM D2890 : EN-Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
ASTM D2892 : EN-Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892 REV A : EN-Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892 REV B : EN-Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2893 : EN-Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
ASTM D2895 : EN-STANDARD TEST METHOD FOR GLOSS RETENTION OF WAXED PAPER AND PAPERBOARD AFTER STORAGE AT 40 DEGREES CELSIUS (104 DEGREES F) (R 1983) (E1-1983)
ASTM D2896 : EN-STANDARD TEST METHOD FOR BASE NUMBER OF PETROLEUM PRODUCTS BY POTENTIOMETRIC PERCHLORIC ACID TITRATION
ASTM D2896 REV A : EN-Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2898 : EN-Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
ASTM D2899 : EN-STANDARD METHOD FOR ESTABLISHING DESIGN STRESSES FOR ROUND TIMBER PILES
ASTM D29 : EN-Standard Test Methods for Sampling and Testing Lac Resins
ASTM D290 : EN-STANDARD PRACTICE FOR BITUMINOUS MIXING PLANT INSPECTION-(Discontinued 2000; No Replacement)
ASTM D290 REV A : EN-Standard Practice for Bituminous Mixing Plant Inspection
ASTM D2900 : EN-Standard Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements
ASTM D2901 : EN-STANDARD TEST METHOD FOR CEMENT CONTENT OF FRESHLY MIXED SOIL- CEMENT (R 1986)
ASTM D2902 : EN-Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D2902 REV A : EN-Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D2903 : EN-Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D2904 : EN-Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Normally Distributed Data
ASTM D2905 : EN-STANDARD PRACTICE FOR STATEMENTS ON NUMBER OF SPECIMENS FOR TEXTILES
ASTM D2906 : EN-Standard Practice for Statements on Precision and Bias for Textiles
ASTM D2907 : EN-Standard Test Methods for Microquantities of Uranium in Water by Fluorometry
ASTM D2908 : EN-Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D2909 : EN-STANDARD TEST METHOD FOR CYCLOHEXYLAMINE IN WATER
ASTM D291 : EN-Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
ASTM D2910 : EN-STANDARD PRACTICE FOR CONCENTRATION AND RECOVERY OF ORGANIC MATTER FROM WATER BY ACTIVATED CARBON
ASTM D2911 : EN-Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911 REV A : EN-STANDARD SPECIFICATION FOR DIMENSIONS AND TOLERANCES FOR PLASTIC BOTTLES
ASTM D2912 : EN-STANDARD TEST METHOD FOR OXIDANT CONTENT OF THE ATMOSPHERE (NEUTRAL KL)
ASTM D2913 : EN-Standard Test Method for Mercaptan Content of the Atmosphere
ASTM D2914 : EN-STANDARD TEST METHODS FOR SULFUR DIOXIDE CONTENT OF THE ATMOSPHERE (WEST-GAEKE METHOD)
ASTM D2915 : EN-Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D2916 : EN-Standard Specification for Isophorone
ASTM D2917 : EN-STANDARD SPECIFICATION FOR METHYL ISOAMYL KETONE
ASTM D2918 : EN-Standard Practice for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D2919 : EN-Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2921 : EN-Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
ASTM D2922 : EN-STANDARD TEST METHODS FOR DENSITY OF SOIL AND SOIL-AGGREGATE IN PLACE BY NUCLEAR METHODS (SHALLOW DEPTH) (R 1990)
ASTM D2923 : EN-Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM D2924 : EN-Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2925 : EN-Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe under Full Bore Flow
ASTM D2926 : EN-STANDARD TEST METHOD FOR BULK MODULUS OF ELASTICITY OF SYNTACTIC FOAM (PISTON-CYLINDER METHOD)
ASTM D2929 : EN-STANDARD TEST METHOD FOR SULFUR CONTENT OF CELLULOSIC MATERIALS BY X-RAY FLUORESCENSE (R 1985) (E1-1985)
ASTM D293 : EN-Standard Test Method for the Sieve Analysis of Coke
ASTM D2930 : EN-Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration
ASTM D2931 : EN-STANDARD GUIDE FOR TESTING LATEX FLAT WALL PAINTS
ASTM D2932 : EN-STANDARD GUIDE FOR TESTING EXTERIOR SOLVENT-REDUCIBLE HOUSE AND TRIM COATINGS (R 1988) (E1-1988)
ASTM D2933 : EN-STANDARD TEST METHOD FOR CORROSION RESISTANCE OF COATED STEEL SPECIMENS (CYCLIC METHOD)
ASTM D2934 : EN-Standard Practice for Rubber Seals – Compatibility with Service Fluids
ASTM D2935 : EN-STANDARD TEST METHOD FOR APPARENT DENSITY OF INDUSTRIAL AROMATIC HYDROCARBONS
ASTM D2936 : EN-Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM D2937 : EN-Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D2938 : EN-STANDARD TEST METHOD FOR UNCONFINED COMPRESSIVE STRENGTH OF INTACT ROCK CORE SPECIMENS
ASTM D2939 : EN-Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
ASTM D2940 : EN-Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports
ASTM D2940/D2940M : EN-Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
ASTM D2941 : EN-Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
ASTM D2942 : EN-Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
ASTM D2943 : EN-Standard Test Method for Aluminum Scratch of 111-Trichloroethane to Determine Stability
ASTM D2944 : EN-Standard Test Method of Sampling Processed Peat Materials
ASTM D2945 : EN-Standard Test Method for Gas Content of Insulating Oils
ASTM D2946 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO ASBESTOS
ASTM D2947 : EN-Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D2948 : EN-STANDARD SPECIFICATION FOR GLASS-REINFORCED AND GLASS-FILLED ACETAL RESIN MOLDING AND EXTRUSION MATERIALS
ASTM D2949 : EN-Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain Waste and Vent Pipe and Fittings
ASTM D2949 REV A : EN-STANDARD SPECIFICATION FOR 3.25-IN. OUTSIDE DIAMETER POLY(VINYL CHLORIDE) (PVC) PLASTIC DRAIN WASTE AND VENT PIPE AND FITTINGS
ASTM D295 : EN-Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
ASTM D2950 : EN-Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM D2951 : EN-Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
ASTM D2952 : EN-STANDARD SPECIFICATION FOR ETHYLENE PLASTICS (R 1987) (E1-1987)
ASTM D2953 : EN-STANADARD CLASSIFICATION SYSTEM FOR POLYMERIC MATERIALS FOR SERVICE IN IONIZING RADIATION (E1-1972) (E2-1985)
ASTM D2954 : EN-STANDARD TEST METHOD FOR ABSORBED GAMMA AND ELECTRON RADIATION DOSE WITH THE FERROUS SULFATE-CUPRIC SULFATE DOSIMETER (R 1984)
ASTM D2955 : EN-Standard Specification for Hand Scrubbing Soap (Grit Soap) Paste and Bar
ASTM D2957 : EN-Standard Specification for Hand Scrubbing Soap (Grit Soap) Powder
ASTM D2958 : EN-Standard Specification for Powdered Toilet Soap
ASTM D2959 : EN-Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
ASTM D2960 : EN-Standard Test Method of Controlled Laundering Test Using Naturally Soiled Fabrics and Household Appliances
ASTM D2961 : EN-Standard Test Method for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
ASTM D2961 REV A : EN-Standard Test Method for Single-Stage Total Moisture Less Than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
ASTM D2962 : EN-Standard Test Method for Calculating Volume-Temperature Correction for Coal-Tar Pitches
ASTM D2967 : EN-STANDARD TEST METHOD FOR EDGE COVERAGE OF COATING POWDERS (R 1995)(E1-1995)
ASTM D2967 REV A : EN-Standard Test Method for Corner Coverage of Powder Coatings
ASTM D2968 : EN-STANDARD TEST METHOD FOR MED AND KEMP FIBERS IN WOOL AND OTHER ANIMAL FIBERS BY MICROPROJECTION
ASTM D2969 : EN-STANDARD TEST METHODS FOR STEEL TIRE CORDS (E1-1990)
ASTM D297 : EN-Standard Test Methods for Rubber Products – Chemical Analysis
ASTM D2970 : EN-Standard Test Methods for Testing Tire Cords Tire Cord Fabrics and Industrial Yarns Made from Glass Filaments
ASTM D2970/D2970M : EN-Standard Test Methods for Testing Tire Cords Tire Cord Fabrics and Industrial Yarns Made from Glass Filaments-Reinstated
ASTM D2970M : EN-Standard Methods of Testing Tire Cords Tire Cord Fabrics and Industrial Yarns Made from Glass Filaments (Metric)
ASTM D2972 : EN-STANDARD TEST METHODS FOR ARSENIC IN WATER (E1-1986)
ASTM D2973 : EN-Standard Test Method for Total Nitrogen in Peat Materials
ASTM D2974 : EN-Standard Test Methods for Moisture Ash and Organic Matter of Peat and Other Organic Soils
ASTM D2974 REV A : EN-Standard Test Methods for Moisture Ash and Organic Matter of Peat and Other Organic Soils
ASTM D2976 : EN-Standard Test Method for pH of Peat Materials
ASTM D2977 : EN-Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2978 : EN-Standard Test Method for Volume of Processed Peat Materials
ASTM D2979 : EN-STANDARD TEST METHOD FOR PRESSURE-SENSITIVE TACK OF ADHESIVES USING AN INVERTED PROBE MACHINE (R 1982) (E1-1985)
ASTM D2980 : EN-Standard Test Method for Volume Mass Moisture-Holding Capacity and Porocity of Saturated Peat Materials
ASTM D2981 : EN-Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
ASTM D2982 : EN-Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
ASTM D2983 : EN-Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2983 REV A : EN-Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2983 REV B : EN-Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D2985 : EN-Standard Test Method for Color of Asbestos
ASTM D2986 : EN-STANDARD PRACTICE FOR EVALUATION OF AIR ASSAY MEDIA BY THE MONODISPERSE DOP (DIOCTYL PHTHALATE) SMOKE TEST
ASTM D2986 REV A : EN-Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
ASTM D2987 : EN-Standard Test Method for Moisture Content of Asbestos Fiber
ASTM D2988 : EN-Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
ASTM D2989 : EN-STANDARD TEST METHOD FOR ACIDITY-ALKALINITY OF HALOGENATED ORGANIC SOLVENTS AND THEIR ADMIXTURES
ASTM D299 : EN-Standard Specification for Asbestos Yarns
ASTM D299/D299M : EN-Standard Specification for Asbestos Yarns
ASTM D2990 : EN-STANDARD TEST METHODS FOR TENSILE COMPRESSIVE AND FLEXURAL CREEP AND CREEP-RUPTURE OF PLASTICS
ASTM D2990 REV A : EN-STANDARD TEST METHODS FOR TENSILE COMPRESSIVE AND FLEXURAL CREEP AND CREEP-RUPTURE OF PLASTICS
ASTM D2991 : EN-STANDARD PRACTICE FOR TESTING STRESS- RELAXATION OF PLASTICS
ASTM D2992 : EN-Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D2993 : EN-Standard Specification for Acrylonitrile-Butadiene Rubberized Tar
ASTM D2994 : EN-Standard Test Methods for Rubberized Tar
ASTM D2995 : EN-STANDARD PRACTICE FOR DETERMINING APPLICATION RATE OF BITUMINOUS DISTRIBUTORS (R 1989)
ASTM D2996 : EN-Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2997 : EN-Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D2998 : EN-STANDARD TEST METHOD FOR POLYHYDRIC ALCOHOLS IN ALKYD RESINS (R 1981) (E1-1982)
ASTM D2999 : EN-STANDARD TEST METHOD FOR MONOPENTAERYTHRITOL IN COMMERCIAL PENTAERYTHRITOL
ASTM D3000 : EN-STANDARD SPECIFICATION FOR POLYBUTYLENE (PB) PLASTIC PIPE (SDR-PR) BASED ON OUTSIDE DIAMETER
ASTM D3000 REV A : EN-Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter
ASTM D3001 : EN-STANDARD TEST METHOD FOR ABSORBED GAMMA AND ELECTRON RADIATION DOSE WITH THE CERIC SULFATE DOSIMETER (R 1984)
ASTM D3002 : EN-Standard Guide for Evaluation of Coatings Applied to Plastics
ASTM D3003 : EN-Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D3004 : EN-Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting Conductor and Insulation Shielding Materials
ASTM D3005 : EN-Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3006 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE PLASTIC PRESSURE-SENSITIVE ELECTRICAL INSULATING TAPE
ASTM D3008 : EN-Standard Test Method for Resin Acids in Rosin by Gas-Liquid Chromatography
ASTM D3009 : EN-STANDARD TEST METHOD FOR COMPOSITION OF TURPENTINE BY GAS CHROMATOGRAPHY (R 1981)
ASTM D301 : EN-Standard Test Methods for Soluble Cellulose Nitrate-Federation of Societies for Paint Technology Standard No. Cs-2-58
ASTM D3010 : EN-STANDARD PRACTICE FOR PREPARING COMPRESSION- MOLDED TEST SAMPLE PLAQUES OF RIGID POLY (VINYL CHLORIDE) COMPOUNDS (DISCONTINUED)
ASTM D3011 : EN-STANDARD SPECIFICATION FOR REINFORCED AND FILLED POLYSTYRENE STYRENE-ACRYLONITRILE AND ACRYLONITRILE- BUTADIENE-STYRENE INJECTION MOLDING AND EXTRUSION MATERIALS
ASTM D3012 : EN-Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Biaxial Rotator
ASTM D3013 : EN-Standard Specification for Epoxy Molding Compounds
ASTM D3014 : EN-Standard Test Method for Flame Height Time of Burning and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D3014 REV A : EN-Standard Test Method for Flame Height Time of Burning and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D3015 : EN-Standard Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds
ASTM D3016 : EN-Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
ASTM D3017 : EN-Standard Test Method for Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
ASTM D3018 : EN-STANDARD SPECIFICATION FOR CLASS A ASPHALT SHINGLES SURFACED WITH MINERAL GRANULES
ASTM D3018/D3018M : EN-Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
ASTM D3019 : EN-Standard Specification for Lap Cement Used with Asphalt Roll Roofing Non-Fibered Asbestos-Fibered and Non-Asbestos-Fibered
ASTM D302 : EN-STANDARD SPECIFICATION FOR ETHYL ACETATE (85 TO 88% GRADE)
ASTM D3020 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE AND ETHYLENE COPOLYMER PLASTIC SHEETING FOR POND CANAL AND RESERVOIR LINING (E1-1987)
ASTM D3021 : EN-Standard Specification for Phthalocyanine Green Pigments
ASTM D3022 : EN-Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
ASTM D3023 : EN-Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
ASTM D3024 : EN-STANDARD SPECIFICATION FOR PROTEIN-BASE ADHESIVES FOR STRUCTURAL LAMINATED WOOD PRODUCTS FOR USE UNDER INTERIOR (DRY USE) EXPOSURE CONDITIONS (DISCONTINUED)
ASTM D3025 : EN-STANDARD RECOMMENDED PRACTICE FOR STANDARDIZING COTTON FIBER TEST RESULTS BY USE OF CALIBRATION COTTONS (R 1980)
ASTM D3026 : EN-Standard Test Method for Sinter Index of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
ASTM D3027 : EN-STANDARD PRACTICE FOR COMPRESSION MOLDING TEST SPECIMENS OF ALLYL MOLDING COMPOUNDS (R 1981) (E1-1985)
ASTM D3028 : EN-Standard Test Method for Kinetic Coefficient of Friction of Plastic Solids
ASTM D3029 : EN-STANDARD TEST METHODS FOR IMPACT RESISTANCE OF FLAT RIGID PLASTIC SPECIMENS BY MEANS OF A TUP (FALLING WEIGHT)
ASTM D303 : EN-STANDARD SPECIFICATION FOR N-BUTYL ACETATE (90 TO 92% GRADE)
ASTM D3030 : EN-Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
ASTM D3031 : EN-STANDARD TEST METHOD FOR TOTAL SULFUR IN NATURAL GAS BY HYDROGENATION
ASTM D3032 : EN-Standard Test Methods for Hookup Wire Insulation-Replaces F777-89
ASTM D3032 REV A : EN-STANDARD TEST METHODS FOR HOOKUP WIRE INSULATION
ASTM D3033 : EN-STANDARD SPECIFICATION FOR TYPE PSP POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS
ASTM D3034 : EN-STANDARD SPECIFICATION FOR TYPE PSM POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS
ASTM D3034 REV A : EN-Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D3034 REV B : EN-STANDARD SPECIFICATION FOR TYPE PSM POLY(VINYL CHLORIDE) (PVC) SEWER PIPE AND FITTINGS
ASTM D3035 : EN-Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D3035 REV A : EN-STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE (SDR-PR) BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3036 : EN-STANDARD SPECIFICATION FOR SOCKET-TYPE POLY (VINYL CHLORIDE) (PVC) PLASTIC LINE COUPLINGS
ASTM D3037 : EN-STANDARD TEST METHODS FOR CARBON BLACK – SURFACE AREA BY NITROGEN ADSORPTION
ASTM D3037 REV A : EN-STANDARD TEST METHODS FOR CARBON BLACK – SURFACE AREA BY NITROGEN ADSORPTION
ASTM D3038 : EN-STANDARD METHOD OF DROP SHATTER TEST FOR COKE (R 1983)
ASTM D3039 : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF FIBER-RESIN COMPOSITES (R 1989) (E1-1989)
ASTM D3039/D3039M : EN-Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D3039/D3039M REV A : EN-Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D304 : EN-Standard Specification for n-Butyl Alcohol (Butanol)
ASTM D3040 : EN-STANDARD PRACTICE FOR PREPARING PRECISION STATEMENTS FOR STANDARDS RELATED TO RUBBER AND RUBBER TESTING
ASTM D3041 : EN-STANDARD METHOD FOR TESTING COATED FABRICS – OZONE CRACKING IN A CHAMBER
ASTM D3042 : EN-STANDARD TEST METHOD FOR INSOLUBLE RESIDUE IN CARBONATE AGGREGATES
ASTM D3043 : EN-STANDARD METHODS OF TESTING PLYWOOD IN FLEXURE (R 1981) (E1-1981)
ASTM D3044 : EN-STANDARD TEST METHOD FOR SHEAR MODULUS OF PLYWOOD (R 1986)
ASTM D3045 : EN-Standard Practice for Heat Aging of Plastics Without Load
ASTM D3046 : EN-STANDARD SPECIFICATION FOR POWDERED HAND CLEANER (SOAP WITH BORAX) (R 1995)
ASTM D3047 : EN-Standard Specification for Powdered Hand Cleaner (Soap with Vegetable Scrubber)
ASTM D3048 : EN-Standard Test Method of Assay for Alkaline Protease
ASTM D3049 : EN-Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
ASTM D3049 REV A : EN-STANDARD TEST METHOD FOR SYNTHETIC ANIONIC INGREDIENT BY CATIONIC TITRATION
ASTM D305 : EN-Standard Test Method for Solvent-Extractable Material in Black Pigments
ASTM D3050 : EN-Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
ASTM D3051 : EN-STANDARD PRACTICE FOR CARBON BLACK – STATING THE PRECISION OF ASTM TEST METHODS
ASTM D3052 : EN-STANDARD PRACTICE FOR RATING WATER-EMULSION FLOOR POLISHES
ASTM D3053 : EN-STANDARD TERMINOLOGY RELATING TO CARBON BLACK
ASTM D3053 REV A : EN-Standard Terminology Relating to Carbon Black
ASTM D3053 REV B : EN-Standard Terminology Relating to Carbon Black
ASTM D3053 REV C : EN-STANDARD TERMINOLOGY RELATING TO CARBON BLACK (E1-1995)
ASTM D3054 : EN-STANDARD TEST METHOD FOR PURITY AND BENZENE CONTENT OF CYCLOHEXANE BY GAS CHROMATOGRAPHY (R 1985)
ASTM D3055 : EN-STANDARD SPECIFICATION FOR CYCLOHEXANE 995
ASTM D3056 : EN-Standard Test Method for Gel Time of Solventless Varnishes
ASTM D3057 : EN-Standard Test Method for Moisture in Aerosol Products
ASTM D3058 : EN-STANDARD SPECIFICATION FOR SIMPLE CAN-PUNCTURING DEVICE FOR AEROSOL LABORATORY USE
ASTM D3059 : EN-STANDARD TEST METHOD FOR PERCENT PRODUCT RETENTION IN PRESSURIZED FOOD CONTAINERS (R 1984)
ASTM D3060 : EN-Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
ASTM D3061 : EN-Standard Specification for Tin-Plate Fabricated Aerosol Cans
ASTM D3062 : EN-STANDARD TEST METHOD FOR SOLIDS CONTENT OF AEROSOL COATINGS
ASTM D3063 : EN-STANDARD TEST METHOD FOR PRESSURE IN GLASS AEROSOL BOTTLES (R 1984)
ASTM D3064 : EN-Standard Terminology Relating to Aerosol Products
ASTM D3065 : EN-Standard Test Methods for Flammability of Aerosol Products
ASTM D3066 : EN-STANDARD RECOMMENDED PRACTICE FOR LABELING AEROSOL PACKAGES (R 1984)
ASTM D3067 : EN-Standard Practice for Reporting Laboratory Results When Checking Aerosol Containers
ASTM D3068 : EN-Standard Specification for Safe Fill of Aerosol Containers
ASTM D3069 : EN-Standard Test Method for Delivery Rate of Aerosol Products
ASTM D3070 : EN-STANDARD METHOD OF RAPID PRESSURE DETERMINATION OF PRESSURIZED PRODUCTS (R 1984)
ASTM D3071 : EN-STANDARD METHOD OF DROP TESTING OF GLASS AEROSOL BOTTLES (R 1984)
ASTM D3072 : EN-STANDARD TEST METHODS FOR VOLATILE CONTENT OF AEROSOL PRODUCTS
ASTM D3073 : EN-Standard Practice for Filling and Inspection of Glass Aerosol Containers
ASTM D3074 : EN-Standard Test Methods for Pressure in Metal Aerosol Containers
ASTM D3075 : EN-Standard Test Method for Overrun of Food Aerosol Products
ASTM D3076 : EN-Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
ASTM D3077 : EN-Standard Practice for Comparison of Spray Patterns of Aerosol Products
ASTM D3078 : EN-Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
ASTM D3079 : EN-Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
ASTM D3080 : EN-STANDARD METHOD FOR DIRECT SHEAR TEST OF SOILS UNDER CONSOLIDATED DRAINED CONDITIONS (R 1979)
ASTM D3082 : EN-TEST METHOD FOR BORON IN WATER
ASTM D3083 : EN-STANDARD SPECIFICATION FOR FLEXIBLE POLY(VINYL CHLORIDE) PLASTIC SHEETING FOR POND CANAL AND RESERVOIR LINING (R 1980) (E1-1987)
ASTM D3084 : EN-Standard Practice for Alpha-Particle Spectrometry of Water
ASTM D3085 : EN-STANDARD PRACTICE FOR MEASUREMENT OF LOW-LEVEL ACTIVITY IN WATER
ASTM D3086 : EN-Standard Test Method for Organochlorine Pesticides in Water
ASTM D3087 : EN-STANDARD TEST METHOD FOR OPERATING PERFORMANCE OF ANION-EXCHANGE MATERIALS FOR STRONG ACID REMOVAL (R 1986) (E1-1986)
ASTM D3089 : EN-STANDARD METHODS OF MEASUREMENT OF A-D DIMENSION OF AEROSOL VALVE DIP TUBES (R 1981) (E1-1985) (E2-1989)
ASTM D3090 : EN-Standard Practice for Storage Testing of Aerosol Products
ASTM D3091 : EN-Standard Practice for Safe Filling of Low-Pressure Pressurized Products
ASTM D3092 : EN-Standard Test Method for Particle-Size Distribution of Space-Insecticide Aerosol
ASTM D3093 : EN-Standard Test Method for Pickup Efficiency of Residual Aerosol Insecticides
ASTM D3094 : EN-Standard Test Method for Seepage Rate of Aerosol Products
ASTM D3096 : EN-Standard Test Method for Liquid Density of Pressurized Products
ASTM D3097 : EN-STANDARD METHOD OF TESTING AEROSOL PRODUCTS FOR DELIVERED MASS (R 1981) (E1-1989)
ASTM D3098 : EN-STANDARD TEST METHOD FOR FINISH CONTENT OF WOVEN GLASS FABRIC CLEANED AND AFTER FINISHED WITH EPOXY – FUNCTIONAL SILANE-TYPE FINISHES FOR PLASTIC LAMINATES
ASTM D310 : EN-STANDARD TEST METHOD FOR SIZE OF ANTHRACITE
ASTM D3102 : EN-Standard Method of Test for Hydrostatic Collapse Strength of Hollow Glass Microspheres
ASTM D3103 : EN-STANDARD TEST METHOD FOR THERMAL INSULATION QUALITY OF PACKAGES
ASTM D3104 : EN-STANDARD TEST METHOD FOR SOFTENING POINT OF PITCHES (METTLER SOFTENING POINT METHOD)
ASTM D3105 : EN-Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
ASTM D3106 : EN-STANDARD TEST METHOD FOR PERMANENT DEFORMATION OF ELASTOMERIC YARNS
ASTM D3106 REV A : EN-Standard Test Method for Permanent Deformation of Elastomeric Yarns
ASTM D3107 : EN-Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3108 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF FRICTION YARN TO SOLID MATERIAL
ASTM D311 : EN-STANDARD METHOD FOR SIEVE ANALYSIS OF CRUSHED BITUMINOUS COAL
ASTM D3110 : EN-STANDARD SPECIFICATION FOR ADHESIVES USED IN NONSTRUCTURAL GLUED LUMBER PRODUCTS
ASTM D3111 : EN-Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D3112 : EN-STANDARD TEST METHOD FOR LEAD IN THE ATMOSPHERE BY COLORIMETRIC DITHIZONE PROCEDURE
ASTM D3113 : EN-STANDARD TEST METHODS FOR SODIUM SALTS OF EDTA IN WATER
ASTM D3115 : EN-STANDARD TEST METHOD FOR EXPLOSIVE REACTIVITY OF LUBRICANTS WITH AEROSPACE ALLOYS UNDER HIGH SHEAR
ASTM D3116 : EN-STANDARD TEST METHOD FOR TRACE AMOUNTS OF LEAD IN GASOLINE
ASTM D3117 : EN-Standard Test Method for Wax Appearance Point of Distillate Fuels
ASTM D3119 : EN-STANDARD TEST METHOD FOR MIST SPRAY FLAMMABILITY OF HYDRAULIC FLUIDS
ASTM D312 : EN-STANDARD SPECIFICATION FOR ASPHALT USED IN ROOFING
ASTM D312 REV A : EN-Standard Specification for Asphalt Used in Roofing
ASTM D3120 : EN-Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D3120 REV A : EN-Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D3121 : EN-STANDARD TEST METHOD FOR TACK OF PRESSURE- SENSITIVE ADHESIVES BY ROLLING BALL
ASTM D3122 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENTS FOR STYRENE-RUBBER (SR) PLASTIC PIPE AND FITTINGS
ASTM D3123 : EN-STANDARD TEST METHOD FOR SPIRAL FLOW OF LOW- PRESSURE THERMOSETTING MOLDING COMPOUNDS (R 1988)
ASTM D3124 : EN-STANDARD TEST METHOD FOR VINYLIDENE UNSATURATION IN POLYETHYLENE BY INFRARED SPECTROPHOTOMETRY (R 1988)
ASTM D3125 : EN-Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
ASTM D3126 : EN-STANDARD SPECIFICATION FOR N-BUTYL ACETATE (98% GRADE)
ASTM D3127 : EN-STANDARD SPECIFICATION FOR ETHYL ACETATE (99% GRADE)
ASTM D3128 : EN-Standard Specification for 2-Methoxyethanol
ASTM D3129 : EN-STANDARD GUIDE FOR TESTING EXTERIOR LATEX HOUSE PAINTS
ASTM D3130 : EN-Standard Specification for n-Propyl Acetate (96 % Grade)
ASTM D3131 : EN-Standard Specification for Isopropyl Acetate (99% Grade)
ASTM D3132 : EN-Standard Test Method for Solubility Range of Resins and Polymers
ASTM D3133 : EN-Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
ASTM D3134 : EN-STANDARD RECOMMENDED PRACTICE FOR SELECTING AND DEFINING COLOR AND GLOSS TOLERANCES OF OPAQUE MATERIALS AND FOR EVALUATING CONFORMANCE (E1-1985)
ASTM D3135 : EN-Standard Specification for Performance of Bonded Fused and Laminated Apparel Fabrics
ASTM D3136 : EN-STANDARD TERMINOLOGY FOR PERMANENT CARE LABELS FOR CONSUMER TEXTILE AND LEATHER PRODUCTS OTHER THAN CARPETS AND UPHOLSTERY
ASTM D3136 REV A : EN-STANDARD TERMINOLOGY RELATING TO CARE LABELS FOR TEXTILE AND LEATHER PRODUCTS OTHER THAN TEXTILE FLOOR COVERINGS AND UPHOLSTERY
ASTM D3137 : EN-Standard Test Method for Rubber Property – Hydrolytic Stability
ASTM D3138 : EN-STANDARD SPECIFICATION FOR SOLVENT CEMENTS FOR TRANSITION JOINTS BETWEEN ACRYLONITRILE- BUTADIENE-STYRENE (ABS) AND POLY(VINYL CHLORIDE) (PVC) NON-PRESSURE PIPING COMPONENTS
ASTM D3139 : EN-STANDARD SPECIFICATION FOR JOINTS FOR PLASTIC PRESSURE PIPES USING FLEXIBLE ELASTOMERIC SEALS
ASTM D3139 REV A : EN-STANDARD SPECIFICATION FOR JOINTS FOR PLASTIC PRESSURE PIPES USING FLEXIBLE ELASTOMERIC SEALS
ASTM D3140 : EN-Standard Practice for Flaring Polyolefin Pipe and Tubing
ASTM D3141 : EN-Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
ASTM D3141/D3141M : EN-Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
ASTM D3142 : EN-Standard Test Method for Specific Gravity API Gravity or Density of Cutback Asphalts by Hydrometer Method
ASTM D3143 : EN-Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D3144 : EN-Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3145 : EN-Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
ASTM D3147 : EN-Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
ASTM D3148 : EN-STANDARD TEST METHOD FOR ELASTIC MODULI OF INTACT ROCK CORE SPECIMENS IN UNIAXIAL COMPRESSION
ASTM D3149 : EN-Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D315 : EN-Standard Specification for Woven Asbestos Tape
ASTM D315/D315M : EN-Standard Specification for Woven Asbestos Tape
ASTM D3150 : EN-Standard Specification for Crosslinked and Noncrosslinked Poly (Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3151 : EN-STANDARD TEST METHOD FOR THERMAL FAILURE UNDER ELECTRIC STRESS OF SOLID ELECTRICAL INSULATING MATERIALS
ASTM D3152 : EN-Standard Test Method for Capillary-Moisture Relationships for Fine-Textured Soils by Pressure-Membrane Apparatus
ASTM D3153 : EN-Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
ASTM D3154 : EN-Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
ASTM D3155 : EN-Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
ASTM D3156 : EN-STANDARD PRACTICE FOR RUBBER – CHROMATOGRAPHIC ANALYSIS OF ANTIDEGRADANTS (STABILIZERS ANTIOXIDANTS AND ANTIOZONANTS)
ASTM D3157 : EN-Standard Test Method for Rubber from Natural SourcesColor
ASTM D3159 : EN-STANDARD SPECIFICATION FOR MODIFIED ETFE- FLUOROPOLYMER MOLDING AND EXTRUSION MATERIALS
ASTM D3159 REV A : EN-Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
ASTM D3160 : EN-Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (a Methylstyrene)
ASTM D3160 REV A : EN-Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (Alpha- Methylstyrene)
ASTM D3161 : EN-STANDARD TEST METHOD FOR WIND-RESISTANCE OF ASPHALT SHINGLES (FAN-INDUCED METHOD)
ASTM D3161 REV A : EN-Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
ASTM D3161 REV B : EN-Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
ASTM D3161 REV C : EN-Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
ASTM D3162 : EN-STANDARD TEST METHOD FOR CARBON MONOXIDE IN THE ATMOSPHERE (CONTINUOUS MEASUREMENT BY NONDISPERSIVE INFRARED SPECTROMETRY)
ASTM D3163 : EN-DETERMINING THE STRENGTH OF ADHESIVELY BONDED RIGID PLASTIC LAP-SHEAR JOINTS IN SHEAR BY TENSION LOADING TEST METHOD FOR (R 1984)
ASTM D3164 : EN-Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3164 REV A : EN-Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3164M : EN-Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3165 : EN-Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D3166 : EN-Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D3167 : EN-Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D3167 REV A : EN-Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM D3168 : EN-Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
ASTM D3169 : EN-Standard Specification for Refined Sunflower Oil
ASTM D3170 : EN-Standard Test Method for Chipping Resistance of Coatings
ASTM D3171 : EN-Standard Test Methods for Constituent Content of Composite Materials
ASTM D3172 : EN-Standard Practice for Proximate Analysis of Coal and Coke
ASTM D3172 REV A : EN-Standard Practice for Proximate Analysis of Coal and Coke
ASTM D3173 : EN-Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3174 : EN-Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
ASTM D3175 : EN-Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
ASTM D3175 REV A : EN-Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
ASTM D3176 : EN-Standard Practice for Ultimate Analysis of Coal and Coke
ASTM D3177 : EN-STANDARD TEST METHODS FOR TOTAL SULFUR IN THE ANALYSIS SAMPLE OF COAL AND COKE
ASTM D3178 : EN-Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
ASTM D3179 : EN-Standard Test Methods for Nitrogen in the Analysis Sample of Coal and Coke
ASTM D3180 : EN-Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D3181 : EN-Standard Guide for Conducting Wear Tests on Textiles
ASTM D3182 : EN-STANDARD PRACTICE FOR RUBBER-MATERIALS EQUIPMENT AND PROCEDURES FOR MIXING STANDARD COMPOUNDS AND PREPARING STANDARD VULCANIZED SHEETS
ASTM D3183 : EN-Standard Practice for Rubber – Preparation of Pieces for Test Purposes from Products
ASTM D3184 : EN-Standard Test Methods for Rubber-Evaluation of NR (Natural Rubber)
ASTM D3185 : EN-STANDARD TEST METHODS FOR RUBBER – EVALUATION OF OF SBR (STYRENE- BUTADIENE RUBBER) INCLUDING MIXTURES WITH OIL
ASTM D3186 : EN-Standard Test Methods for Rubber – Evaluation of SBR (Styrene- Butadiene Rubber) Mixed with Carbon Black or Carbon Black and Oil
ASTM D3187 : EN-STANDARD TEST METHODS FOR RUBBER – EVALUATION OF NBR (ACRYLONITRILE- BUTADIENE RUBBER)
ASTM D3188 : EN-STANDARD TEST METHODS FOR RUBBER – EVALUATION OF IIR (ISOBUTENE-ISOPRENE RUBBER)
ASTM D3189 : EN-STANDARD TEST METHODS FOR RUBBER – EVALUATION OF SOLUTION BR (POLYBUTADIENE RUBBER)
ASTM D319 : EN-STANDARD SPECIFICATION FOR AMYL ALCOHOL (SYNTHETIC)
ASTM D3190 : EN-Standard Test Method for Rubber – Evaluation of Chloroprene Rubber (CR)
ASTM D3191 : EN-STANDARD TEST METHODS FOR CARBON BLACK IN SBR (STYRENE-BUTADIENE RUBBER) – RECIPE AND EVALUATION PROCEDURES
ASTM D3191 REV A : EN-STANDARD TEST METHODS FOR CARBON BLACK IN SBR (STYRENE-BUTADIENE RUBBER) – RECIPE AND EVALUATION PROCEDURES
ASTM D3191 REV B : EN-Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber) – Recipe and Evaluation Procedures
ASTM D3192 : EN-Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM D3192 REV A : EN-Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
ASTM D3193 : EN-STANDARD SPECIFICATION FOR ETHYLBENZENE
ASTM D3194 : EN-Standard Test Method for Rubber from Natural Sources – Plasticity Retention Index (PRI)
ASTM D3195 : EN-Standard Practice for Rotameter Calibration
ASTM D3197 : EN-STANDARD SPECIFICATION FOR INSERT-TYPE POLYETHYLENE FUSION FITTINGS FOR SDR 11.0 POLYETHYLENE PIPE
ASTM D3198 : EN-STANDARD TEST METHOD FOR APPLICATION AND REMOVAL TORQUE OF THREADED OR LUG-STYLE CLOSURES
ASTM D3199 : EN-Standard Test Method for Water Vapor Transmission Through Screw-Cap Closure Liners
ASTM D3200 : EN-Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
ASTM D3201 : EN-Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D3201 REV A : EN-Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
ASTM D3202 : EN-Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
ASTM D3203 : EN-STANDARD TEST METHOD FOR PERCENT AIR VOIDS IN COMPACTED DENSE AND OPEN BITUMINOUS PAVING MIXTURES (AASHTO T269)
ASTM D3204 : EN-Standard Specification for Preformed Cellular Plastic Joint Fillers for Relieving Pressure
ASTM D3205 : EN-STANDARD TEST METHOD FOR VISCOSITY OF ASPHALT WITH CONE AND PLATE VISCOMETER (R 1985)
ASTM D3206 : EN-STANDARD TEST METHOD FOR SOIL RESISTANCE OF FLOOR POLISHES
ASTM D3207 : EN-Standard Test Method for Detergent Resistance of Floor Polish Films
ASTM D3208 : EN-Standard Specification for Manifold Papers for Permanent Records
ASTM D3209 : EN-Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
ASTM D3210 : EN-Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
ASTM D3211 : EN-STANDARD TEST METHOD FOR RELATIVE DENSITY OF BLACK SMOKE (RINGELMANN METHOD)
ASTM D3212 : EN-STANDARD SPECIFICATION FOR JOINTS FOR DRAIN AND SEWER PLASTIC PIPES USING FLEXIBLE ELASTOMERIC SEALS
ASTM D3212 REV A : EN-Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3213 : EN-Standard Practices for Handling Storing and Preparing Soft Undisturbed Marine Soil
ASTM D3214 : EN-Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation
ASTM D3215 : EN-Standard Test Method for Measurement of the Specific Electrical Impedance of Electrical-Grade Magnesium Oxide for Use in Sheathed-Type Heating Elements
ASTM D3217 : EN-STANDARD TEST METHODS FOR BREAKING TENACITY OF MAN-MADE TEXTILE FIBERS IN LOOP OR KNOT CONFIGURATIONS
ASTM D3217 REV A : EN-STANDARD TEST METHODS FOR BREAKING TENACITY OF MAN-MADE TEXTILE FIBERS IN LOOP OR KNOT CONFIGURATIONS
ASTM D3218 : EN-Standard Specification for Polyolefin Monofilaments
ASTM D3219 : EN-STANDARD TOLERANCES FOR INDUSTRIAL FILAMENT YARNS TIRE CORDS AND TIRE CORD FABRICS MADE FROM MAN-MADE ORGANIC- BASE FIBERS
ASTM D322 : EN-STANDARD TEST METHOD FOR GASOLINE DILUENT IN USED GASOLINE ENGINE OILS BY DISTILLATION
ASTM D3220 : EN-STANDARD SPECIFICATION FOR REINFORCED THERMOPLASTIC POLYESTER MOLDING AND EXTRUSION MATERIALS (E1-1982)
ASTM D3221 : EN-STANDARD SPECIFICATION FOR THERMOPLASTIC POLYTEREPHTHALATE MOLDING AND EXTRUSION MATERIALS
ASTM D3222 : EN-STANDARD SPECIFICATION FOR POLY(VINYLIDENE FLUORIDE) (PVDF) MOLDING AND EXTRUSION MATERIALS
ASTM D3222 REV A : EN-Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D3223 : EN-STANDARD TEST METHOD FOR TOTAL MERCURY IN WATER
ASTM D3224 : EN-Standard Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions
ASTM D3225 : EN-Standard Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives
ASTM D3227 : EN-Standard Test Method for Thiol (Mercaptan) Sulfur in Gasoline Kerosine Aviation Turbine and Distillate Fuels (Potentiometric Method)
ASTM D3227 REV A : EN-Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline Kerosine Aviation Turbine and Distillate Fuels (Potentiometric Method)-IP Designation 342/00
ASTM D3227A : EN-Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline Kerosine Aviation Turbine and Distillate Fuels (Potentiometric Method)
ASTM D3228 : EN-Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D3229 : EN-Standard Test Method for Low Levels of Lead in Gasoline by Wavelength Dispersive X-Ray Spectrometry
ASTM D323 : EN-Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ASTM D323 REV A : EN-Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
ASTM D3230 : EN-Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3231 : EN-Standard Test Method for Phosphorus in Gasoline
ASTM D3232 : EN-STANDARD METHOD FOR MEASUREMENT OF CONSISTENCY OF LUBRICATING GREASES AT HIGH TEMPERATURES
ASTM D3233 : EN-Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
ASTM D3234 : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF PETROLEUM WAX COATINGS (R 1983)
ASTM D3235 : EN-STANDARD TEST METHOD FOR SOLVENT EXTRACTABLES IN PETROLEUM WAXES
ASTM D3236 : EN-Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D3237 : EN-Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3238 : EN-STANDARD TEST METHOD FOR CALCULATION OF CARBON DISTRIBUTION AND STRUCTURAL GROUP ANALYSIS OF PETROLEUM OILS BY THE N-D-M METHOD
ASTM D3239 : EN-STANDARD METHOD FOR AROMATIC TYPES ANALYSIS OF GAS-OIL AROMATIC FRACTIONS BY HIGH IONIZING VOLTAGE MASS SPECTROMETRY
ASTM D3240 : EN-Standard Test Method for Undissolved Water in Aviation Turbine Fuels
ASTM D3240 REV A : EN-STANDARD TEST METHOD FOR UNDISSOLVED WATER IN AVIATION TURBINE FUELS
ASTM D3241 : EN-Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)-IP Designation: 323/99
ASTM D3241 REV A : EN-Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) (IP Designation: 323/89)
ASTM D3241 REV B : EN-Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)-IP Designation: 323/99
ASTM D3242 : EN-STANDARD TEST METHOD FOR ACIDITY IN AVIATION TURBINE FUEL (IP 354/81) (E1-1989)
ASTM D3242 REV A : EN-STANDARD TEST METHOD FOR ACIDITY IN AVIATION TURBINE FUEL (R 1984) (E1-1984)
ASTM D3244 : EN-Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D3244 REV A : EN-Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM D3245 : EN-Standard Test Method for Pumpability of Industrial Fuel Oils
ASTM D3246 : EN-Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D3247 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF STATIC FRICTION OF CORRUGATED AND SOLID FIBERBOARD (HORIZONTAL PLANE METHOD)
ASTM D3248 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF STATIC FRICTION OF CORRUGATED AND SOLID FIBERBOARD (INCLINED PLANE METHOD) (R 1984)
ASTM D3249 : EN-STANDARD PRACTICE FOR GENERAL AMBIENT AIR ANALYZER PROCEDURES
ASTM D3250 : EN-STANDARD TEST METHOD FOR TOTAL OXYGEN DEMAND IN WATER
ASTM D3251 : EN-Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied over Film-Insulated Magnet Wire
ASTM D3252 : EN-STANDARD TEST METHOD FOR UNDERSIZED LOOSE MUSCOVITE MICA SPLITTINGS
ASTM D3253 : EN-STANDARD SPECIFICATION FOR VULCANIZED RUBBER SHEETING FOR POND CANAL AND RESERVOIR LINING
ASTM D3254 : EN-STANDARD SPECIFICATION FOR FABRIC-REINFORCED VULCANIZED RUBBER SHEETING FOR POND CANAL AND RESERVOIR LINING (DISCONTINUED)
ASTM D3256 : EN-Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
ASTM D3257 : EN-Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
ASTM D3258 : EN-Standard Test Method for Porosity of Paint Films
ASTM D3259 : EN-Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle
ASTM D3260 : EN-Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
ASTM D3261 : EN-STANDARD SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING
ASTM D3261 REV A : EN-STANDARD SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING
ASTM D3262 : EN-STANDARD SPECIFICATION FOR “FIBERGLASS” (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) SEWER PIPE
ASTM D3263 : EN-Standard Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits
ASTM D3264 : EN-Standard Specification for Industrial Grade Aniline
ASTM D3265 : EN-STANDARD TEST METHOD FOR CARBON BLACK – TINT STRENGTH
ASTM D3265 REV A : EN-STANDARD TEST METHOD FOR CARBON BLACK-TINT STRENGTH (E1-1987)
ASTM D3265 REV B : EN-STANDARD TEST METHOD FOR CARBON BLACK – TINT STRENGTH
ASTM D3266 : EN-Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
ASTM D3267 : EN-STANDARD TEST METHOD FOR SEPARATION AND COLLECTION OF PARTICULATE AND WATER-SOLUBLE GASEOUS FLUORIDES IN THE ATMOSPHERE (FILTER AND IMPINGER METHOD)
ASTM D3268 : EN-STANDARD METHOD FOR SEPARATION AND COLLECTION OF PARTICULATE AND GASEOUS FLUORIDES IN THE ATMOSPHERE (SODIUM BICARBONATE-COATED GLASS TUBE AND A PARTICULATE FILTER METHOD)
ASTM D3269 : EN-Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures)
ASTM D3270 : EN-Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
ASTM D3271 : EN-Standard Practice for Direct Injection of Solvent-Reducible Paints into a Gas Chromatograph for Solvent Analysis
ASTM D3272 : EN-Standard Practice for Vacuum Distillation of Solvents from Solvent-Reducible Paints for Analysis
ASTM D3273 : EN-STANDARD TEST METHOD FOR RESISTANCE TO GROWTH OF MOLD ON THE SURFACE OF INTERIOR COATINGS IN AN ENVIRONMENTAL CHAMBER (E1-1983)
ASTM D3274 : EN-Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth or Soil and Dirt Accumulation
ASTM D3275 : EN-STANDARD SPECIFICATION FOR E-CTFE-FLUOROPLASTIC MOLDING EXTRUSION AND COATING MATERIALS
ASTM D3276 : EN-Standard Guide for Painting Inspectors (Metal Substrates)
ASTM D3277 : EN-STANDARD TEST METHODS FOR MOISTURE CONTENT OF OIL- IMPREGNATED CELLULOSIC INSULATION
ASTM D3278 : EN-Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D3279 : EN-Standard Test Method for n-Heptane Insolubles
ASTM D3280 : EN-Standard Test Methods for Analysis of White Zinc Pigments
ASTM D3281 : EN-Standard Test Method for Formability of Attached Organic Coatings with Impact-Wedge Bend Apparatus
ASTM D3282 : EN-STANDARD PRACTICE FOR CLASSIFICATION OF SOILS AND SOIL-AGGREGATE MIXTURES FOR HIGHWAY CONSTRUCTION PURPOSES (E1-1989)
ASTM D3283 : EN-Standard Specification for Air as an Electrical Insulating Material
ASTM D3284 : EN-Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM D3284 REV A : EN-Standard Test Method for Combustible Gases in the Gas Space of Electrical Apparatus in the Field
ASTM D3285 : EN-Standard Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test)
ASTM D3286 : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY THE ISOPERIBOL BOMB CALORIMETER
ASTM D3286 REV A : EN-STANDARD TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE BY THE ISOPERIBOL BOMB CALORIMETER
ASTM D3287 : EN-STANDARD SPECIFICATION FOR BIAXIALLY ORIENTED POLYETHYLENE (PEO) PLASTIC PIPE (SDR-PR) BASED ON CONTROLLED OUTSIDE DIAMETER
ASTM D3288 : EN-STANDARD TEST METHODS FOR MAGNET-WIRE ENAMELS
ASTM D3288/D3288M : EN-Standard Test Methods for Magnet-Wire Enamels
ASTM D3289 : EN-Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
ASTM D329 : EN-Standard Specification for Acetone
ASTM D3290 : EN-Standard Specification for Bond and Ledger Papers for Permanent Records
ASTM D3291 : EN-Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics under Compression
ASTM D3293 : EN-STANDARD SPECIFICATION FOR PTFE RESIN MOLDED SHEET (R 1988) (E1-1988)
ASTM D3293 REV A : EN-Standard Specification for PTFE Resin Molded Sheet
ASTM D3294 : EN-Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes-Replaces ASTM D3293
ASTM D3294 REV A : EN-Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
ASTM D3295 : EN-STANDARD SPECIFICATION FOR PTFE TUBING
ASTM D3295 REV A : EN-STANDARD SPECIFICATION FOR PTFE TUBING (R 1988) (E1-1988)
ASTM D3296 : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON TUBE
ASTM D3296 REV A : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON TUBE
ASTM D3297 : EN-STANDARD PRACTICE FOR MOLDING AND MACHINING TOLERANCES FOR PTFE RESIN PARTS
ASTM D3298 : EN-STANDARD SPECIFICATION FOR PERFORATED STYRENE- RUBBER (SR) PLASTIC DRAIN PIPE
ASTM D3299 : EN-STANDARD SPECIFICATION FOR FILAMENT-WOUND GLASS-FIBER REINFORCED REINFORCED THERMOSET RESIN CHEMICAL- RESISTANT TANKS
ASTM D3299 REV A : EN-Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D330 : EN-Standard Specification for 2-Butoxyethanol
ASTM D3300 : EN-Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin under Impulse Conditions
ASTM D3301 : EN-Standard Specification for File Folders for Storage of Permanent Records
ASTM D3302 : EN-Standard Test Method for Total Moisture in Coal
ASTM D3302 REV A : EN-Standard Test Method for Total Moisture in Coal
ASTM D3302/D3302M : EN-Standard Test Method for Total Moisture in Coal
ASTM D3304 : EN-STANDARD METHOD FOR ANALYSIS OF ENVIRONMENTAL MATERIALS FOR POLYCHLORINATED BIPHENYLS
ASTM D3305 : EN-STANDARD METHOD OF SAMPLING GAS FROM A TRANSFORMER (R 1989)
ASTM D3306 : EN-Standard Specification for Ethylene Glycol Base Engine Coolant for Automobile and Light Duty Service
ASTM D3306 REV A : EN-STANDARD SPECIFICATION FOR ETHYLENE GLYCOL BASE ENGINE COOLANT
ASTM D3306 REV B : EN-STANDARD SPECIFICATION FOR ETHYLENE GLYCOL BASE ENGINE COOLANT
ASTM D3307 : EN-STANDARD SPECIFICATION FOR PFA-FLUOROCARBON MOLDING AND EXTRUSION MATERIALS
ASTM D3307 REV A : EN-STANDARD SPECIFICATION FOR PFA-FLUOROCARBON MOLDING AND EXTRUSION MATERIALS
ASTM D3308 : EN-Standard Specification for PTFE Resin Skived Tape
ASTM D3308 REV A : EN-Standard Specification for PTFE Resin Skived Tape
ASTM D3309 : EN-STANDARD SPECIFICATION FOR POLYBUTYLENE (PB) PLASTIC HOT- AND COLD- WATER DISTRIBUTION SYSTEMS
ASTM D3309 REV A : EN-Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
ASTM D3309 REV B : EN-STANDARD SPECIFICATION FOR POLYBUTYLENE (PB) PLASTIC HOT-AND COLD- WATER DISTRIBUTION SYSTEMS
ASTM D331 : EN-STANDARD SPECIFICATION FOR 2-ETHOXYETHANOL
ASTM D3310 : EN-Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D3311 : EN-STANDARD SPECIFICATION FOR DRAIN WASTE AND VENT (DWV) PLASTIC FITTINGS PATTERNS
ASTM D3311 REV A : EN-Standard Specification for Drain Waste and Vent (DWV) Plastic Fittings Patterns
ASTM D3311 REV B : EN-STANDARD SPECIFICATION FOR DRAIN WASTE AND VENT (DWV) PLASTIC FITTINGS PATTERNS
ASTM D3312 : EN-Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D3313 : EN-Standard Test Method for Carbon Black – Individual Pellet Crush Strength
ASTM D3313 REV A : EN-Standard Test Method for Carbon Black – Individual Pellet Hardness
ASTM D3314 : EN-STANDARD TEST METHOD FOR RUBBER – CHEMICAL ANALYSIS FOR POLYSTYRENE BLOCKS IN SBR (STYRENE- BUTADIENE RUBBER) AND STYRENE-REINFORCED LATICES
ASTM D3315 : EN-STANDARD TEST METHODS FOR RADIOACTIVE ZIRCONIUM IN WATER (R 1981) (E1-1985)
ASTM D3316 : EN-Standard Test Method for Stability of Perchloroethylene with Copper
ASTM D3317 : EN-STANDARD SPECIFICATION FOR HIGH MODULUS ORGANIC YARN AND ROVING
ASTM D3319 : EN-Standard Test Method for Accelerated Polishing of Aggregates Using the British Wheel
ASTM D332 : EN-STANDARD TEST METHOD FOR TINTING STRENGTH OF WHITE PIGMENTS
ASTM D3320 : EN-STANDARD SPECIFICATION FOR EMULSIFIED COAL-TAR PITCH (MINERAL COLLOID TYPE) (R 1984)
ASTM D3321 : EN-STANDARD TEST METHOD FOR USE OF REFRACTOMETER FOR FIELD TEST DETERMINATION OF THE FREEZING POINT OF AQUEOUS ENGINE COOLANTS
ASTM D3322 : EN-Standard Practice for Testing Primers and Primer Surfacers over Preformed Metal
ASTM D3323 : EN-STANDARD GUIDE FOR TESTING INTERIOR SOLVENT-REDUCIBLE FLAT WALL PAINTS
ASTM D3324 : EN-Standard Practice for Carbon Black – Improving Test Reproducibility Using ASTM Reference Blacks
ASTM D3324 REV A : EN-STANDARD PRACTICE FOR CARBON BLACK – IMPROVING TEST REPRODUCIBILITY USING ASTM REFERENCE BLACKS
ASTM D3325 : EN-Standard Practice for Preservation of Waterborne Oil Samples
ASTM D3326 : EN-Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D3327 : EN-STANDARD METHODS FOR ANALYSIS OF SELECTED ELEMENTS IN WATERBORNE OILS
ASTM D3328 : EN-STANDARD METHODS FOR COMPARISON OF WATERBORNE PETROLEUM OILS BY GAS CHROMATOGRAPHY (R 1982)
ASTM D3329 : EN-STANDARD METHOD FOR PURITY OF METHYL ISOBUTYL KETONE BY GAS CHROMATOGRAPHY
ASTM D3329 REV A : EN-Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D333 : EN-Standard Guide for Clear and Pigmented Lacquers
ASTM D3330 : EN-STANDARD TEST METHODS FOR PEEL ADHESION OF PRESSURE-SENSITIVE TAPE AT 180 DEGREE ANGLE
ASTM D3330/D3330M : EN-Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3330M : EN-STANDARD TEST METHODS FOR PEEL ADHESION OF PRESSURE-SENSITIVE TAPE AT 180 DEGREE ANGLE (METRIC)
ASTM D3331 : EN-STANDARD TEST METHOD FOR ASSESSMENT OF MECHANICAL-SHOCK FRAGILITY USING PACKAGE CUSHIONING MATERIALS
ASTM D3332 : EN-Standard Test Methods for Mechanical-Shock Fragility of Products Using Shock Machines
ASTM D3333 : EN-Standard Practice for Sampling Manufactured Staple Fibers Sliver or Tow for Testing
ASTM D3333 REV A : EN-STANDARD PRACTICE FOR SAMPLING MAN-MADE STAPLE FIBERS SILVER OR TOW FOR TESTING
ASTM D3334 : EN-STANDARD METHODS OF TESTING FABRICS WOVEN FROM POLYOLEFIN MONOFILAMENTS
ASTM D3335 : EN-Standard Test Method for Low Concentrations of Lead Cadmium and Colbalt in Paint by Atomic Absorption Spectroscopy
ASTM D3335 REV A : EN-Standard Test Method for Low Concentrations of Lead Cadmium and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D3336 : EN-STANDARD TEST METHOD FOR PERFORMANCE CHARACTERISTICS OF LUBRICATING GREASES IN BALL BEARINGS AT ELEVATED TEMPERATURES
ASTM D3337 : EN-Standard Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
ASTM D3338 : EN-Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3338/D3338M : EN-Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D3339 : EN-Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
ASTM D3340 : EN-Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D3341 : EN-Standard Test Method for Lead in Gasoline – Iodine Monochloride Method
ASTM D3342 : EN-Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
ASTM D3343 : EN-STANDARD TEST METHOD FOR ESTIMATION OF HYDROGEN CONTENT OF AVIATION FUELS
ASTM D3344 : EN-Standard Test Method for Total Wax Content of Corrugated Paperboard
ASTM D3345 : EN-Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM D3346 : EN-STANDARD TEST METHODS FOR RUBBER PROPERTY – PROCESSABILITY OF SBR (STYRENE-BUTADIENE RUBBER) WITH THE MOONEY VISCOMETER
ASTM D3347 : EN-STANDARD TEST METHOD FOR FLOW RATE AND TAP DENSITY OF ELECTRICAL GRADE MAGNESIUM OXIDE FOR USE IN SHEATHED TYPE ELECTRIC HEATING ELEMENTS (R 1979)
ASTM D3348 : EN-Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
ASTM D3349 : EN-Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
ASTM D335 : EN-STANDARD SPECIFICATION FOR COTTON TAPES WOVEN FOR ELECTRICAL PURPOSES
ASTM D3350 : EN-Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3350 REV A : EN-Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3351 : EN-STANDARD TEST METHOD FOR GEL COUNT OF PLASTIC FILM (R 1988)
ASTM D3352 : EN-Standard Test Method for Strontium Ion in Brackish Water Seawater and Brines
ASTM D3352 REV A : EN-Standard Test Method for Strontium Ion in Brackish Water Seawater and Brines
ASTM D3353 : EN-STANDARD TEST METHODS FOR FIBROUS-INSULATED MAGNET WIRE
ASTM D3354 : EN-Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3355 : EN-STANDARD TEST METHOD FOR FIBER CONTENT OF UNIDIRECTIONAL FIBER-RESIN COMPOSITES BY ELECTRICAL RESISTIVITY
ASTM D3356 : EN-STANDARD SPECIFICATION FOR FITTINGS FOR BITUMINIZED FIBER DRAIN AND SEWER PIPE
ASTM D3357 : EN-STANDARD TEST METHOD FOR RADIOACTIVE NICKEL IN WATER
ASTM D3358 : EN-STANDARD PRACTICE FOR TESTING WATER-THINNED FLOOR PAINTS
ASTM D3359 : EN-Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D3359 REV A : EN-Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D3360 : EN-STANDARD TEST METHOD FOR PARTICLE SIZE DISTRIBUTION BY HYDROMETER OF THE COMMON WHITE EXTENDER PIGMENTS (R 1989)
ASTM D3361 : EN-STANDARD PRACTICE FOR OPERATING LIGHT- AND WATER-EXPOSURE APPARATUS (UNFILTERED CARBON-ARC TYPE) FOR TESTING PAINT VARNISH LACQUER AND RELATED PRODUCTS USING THE DEW CYCLE
ASTM D3362 : EN-STANDARD TEST METHOD FOR PURITY OF ACRYLATE ESTERS BY GAS CHROMATOGRAPHY (R 1987)
ASTM D3363 : EN-STANDARD TEST METHOD FOR FILM HARDNESS BY PENCIL TEST (R 1989)
ASTM D3363 REV A : EN-Standard Test Method for Film Hardness by Pencil Test
ASTM D3364 : EN-STANDARD TEST METHOD FOR FLOW RATES FOR POLY (VINYL CHLORIDE) AND RHEOLOGICALLY UNSTABLE THERMOPLASTICS
ASTM D3365 : EN-STANDARD TEST METHOD FOR CONCENTRATION AND PARTICLE SIZE DISTRIBUTION OF AIRBORNE PARTICULATES COLLECTED IN LIQUID MEDIA USING AN ELECTRONIC COUNTER
ASTM D3366 : EN-Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
ASTM D3367 : EN-STANDARD TEST METHOD FOR PLASTICIZER SORPTION OF POLY(VINYL CHLORIDE) RESINS UNDER APPLIED CENTRIFUGAL FORCE (R 1986) (E1-1986)
ASTM D3368 : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON RESIN SHEET AND FILM
ASTM D3368 REV A : EN-STANDARD SPECIFICATION FOR FEP-FLUOROCARBON RESIN SHEET AND FILM
ASTM D3369 : EN-Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
ASTM D3369 REV A : EN-Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
ASTM D3370 : EN-Standard Practices for Sampling Water from Closed Conduits
ASTM D3370 REV A : EN-Standard Practices for Sampling Water from Closed Conduits
ASTM D3371 : EN-Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
ASTM D3372 : EN-Standard Test Method for Molybdenum in Water
ASTM D3373 : EN-STANDARD TEST METHODS FOR VANADIUM IN WATER
ASTM D3374 : EN-Standard Specification for Vinyl-Coated Glass Yarns
ASTM D3375 : EN-STANDARD TEST METHOD FOR COLUMN CAPACITY OF PARTICULATE MIXED BED ION EXCHANGE MATERIALS
ASTM D3375 REV A : EN-Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
ASTM D3376 : EN-Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D3377 : EN-Standard Test Method for Weight Loss of Solventless Varnishes
ASTM D3378 REV A : EN-STANDARD SPECIFICATION FOR ASPHALT-SATURATED AND COATED ASBESTOS FELT BASE SHEET USED IN ROOFING
ASTM D3379 : EN-Standard Test Method for Tensile Strength and Young’s Modulus for High-Modulus Single-Filament Materials
ASTM D3380 : EN-STANDARD TEST METHOD FOR PERMITTIVITY (DIELECTRIC CONSTANT) AND DISSIPATION FACTOR OF PLASTIC-BASED MICROWAVE CIRCUIT SUBSTRATES
ASTM D3381 : EN-Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D3381/D3381M REV A : EN-Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D3382 : EN-Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
ASTM D3383 REV A : EN-STANDARD GUIDE FOR TESTING SOLVENT- REDUCIBLE FLOOR PAINTS
ASTM D3385 : EN-Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D3386 : EN-Standard Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
ASTM D3387 : EN-Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
ASTM D3389 : EN-Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Double-Head Abrader)
ASTM D3389 REV A : EN-STANDARD METHOD FOR TESTING COATED FABRICS ABRASION RESISTANCE (ROTARY PLATFORM DOUBLE-HEAD ABRADER)
ASTM D3390 : EN-STANDARD SPECIFICATION FOR RUBBER SEMICONDUCTING TAPE
ASTM D3391 : EN-STANDARD SPECIFICATION FOR RUBBER INSULATING TAPE FOR HIGH-VOLTAGE APPLICATIONS
ASTM D3393 : EN-Standard Specification for Coated Fabrics-Waterproofness
ASTM D3394 : EN-Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM D3395 : EN-Standard Test Methods for Rubber Deterioration – Dynamic Ozone Cracking in a Chamber
ASTM D3396 : EN-STANDARD PRACTICE FOR CARBON BLACK – MEASURING THE PRECISION OF ASTM TEST METHODS
ASTM D3397 : EN-STANDARD METHODS FOR TRIAXIAL CLASSIFICATION OF BASE MATERIALS SOILS AND SOIL MIXTURES
ASTM D3398 : EN-Standard Test Method for Index of Aggregate Particle Shape and Texture
ASTM D3399 : EN-STANDARD SPECIFICATION FOR GENERAL-PURPOSE SYNTHETIC DETERGENT LIQUID
ASTM D34 : EN-Standard Guide for Chemical Analysis of White Pigments
ASTM D3400 : EN-Standard Specification for Liquid Sodium Silicates
ASTM D3401 : EN-Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
ASTM D3402 : EN-Standard Test Method for Tumbler Test for Coke
ASTM D3402/D3402M : EN-Standard Test Method for Tumbler Test for Coke
ASTM D3403 : EN-STANDARD TEST METHODS FOR RUBBER – EVALUATION OF IR (ISOPRENE RUBBER)
ASTM D3403 REV A : EN-Standard Test Methods for Rubber – Evaluation of IR (Isoprene Rubber)
ASTM D3404 : EN-Standard Guide for Measuring Matric Potential in the Vadose Zone Using Tensiometers
ASTM D3405 : EN-STANDARD SPECIFICATION FOR JOINT SEALANTS HOT -POURED FOR CONCRETE AND ASPHALT PAVEMENTS
ASTM D3406 : EN-STANDARD SPECIFICATION FOR JOINT SEALANT HOT- APPLIED ELASTOMERIC- TYPE FOR PORTLAND CEMENT CONCRETE PAVEMENTS (R 1991) (AASHTO M282) (E1-1991)
ASTM D3407 : EN-JOINT SEALANTS HOT- POURED FOR CONCRETE AND ASPHALT PAVEMENTS METHODS OF TESTING
ASTM D3408 : EN-STANDARD METHODS OF TESTING JOINT SEALANTS HOT-POURED ELASTOMERIC- TYPE FOR PORTLAND CEMENT CONCRETE PAVEMENTS
ASTM D3409 : EN-Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp Wet or Underwater Surfaces
ASTM D341 : EN-Standard Test Method for Viscosity-Temperature Charts for Liquid Petroleum Products
ASTM D3410 : EN-STANDARD TEST METHOD FOR COMPRESSIVE PROPERTIES OF UNIDIRECTIONAL OR CROSSPLY FIBER-RESIN COMPOSITES (R 1982)
ASTM D3410/D3410M : EN-Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3412 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF FRICTION YARN TO YARN
ASTM D3413 : EN-Standard Test Method for Lead (Inorganic) in Workplace Atmospheres by Atomic Absorption Spectrometry
ASTM D3414 : EN-Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D3415 : EN-Standard Practice for Identification of Waterborne Oils
ASTM D3416 : EN-Standard Test Method for Total Hydrocarbons Methane and Carbon Monoxide in the Atmosphere (Gas Chromatographic Method)
ASTM D3417 : EN-Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
ASTM D3418 : EN-Standard Test Method for Transition Temperatures of Polymers by Thermal Analysis
ASTM D3419 : EN-Standard Practice for In-Line Screw-Injection Molding Test Specimens from Thermosetting Compounds
ASTM D3419 REV A : EN-STANDARD PRACTICE FOR IN-LINE SCREW-INJECTION MOLDING TEST SPECIMENS FROM THERMOSETTING COMPOUNDS
ASTM D3420 : EN-STANDARD TEST METHOD FOR PENDULUM IMPACT RESISTANCE OF PLASTIC FILM
ASTM D3420 REV A : EN-Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3421 : EN-STANDARD RECOMMENDED PRACTICE FOR EXTRACTION AND DETERMINATION OF PLASTICIZER MIXTURES FROM VINYL CHLORIDE PLASTICS
ASTM D3423 : EN-Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
ASTM D3424 : EN-Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
ASTM D3425 : EN-STANDARD GUIDE FOR TESTING SOLVENT- REDUCIBLE INTERIOR SEMIGLOSS WALL AND TRIM ENAMELS (R 1988) (E1-1988)
ASTM D3426 : EN-Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D3427 : EN-Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D3428 : EN-STANDARD TEST METHOD FOR TORQUE STABILITY WEAR AND BRINE SENSITIVITY EVALUATION OF BALL JOINT GREASES
ASTM D3429 : EN-Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D3430 : EN-Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
ASTM D3431 : EN-STANDARD TEST METHOD FOR TRACE NITROGEN IN LIQUID PETROLEUM HYDROCARBONS (MICROCOULOMETRIC METHOD)
ASTM D3432 : EN-STANDARD TEST METHOD FOR FREE TOLUENE DIISOCYANATES IN URETHANE PREPOLYMERS AND COATING SOLUTIONS BY GAS CHROMATOGRAPHY
ASTM D3433 : EN-Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3434 : EN-Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D3434 REV A : EN-STANDARD TEST METHOD FOR MULTIPLE-CYCLE ACCELERATED AGING TEST (AUTOMATIC BOIL TEST) FOR EXTERIOR WET USE WOOD ADHESIVES
ASTM D3435 : EN-STANDARD SPECIFICATION FOR PLASTIC CONTAINERS (JERRY CANS) FOR PETROLEUM PRODUCTS
ASTM D3436 : EN-Standard Practice for Sampling and Handling Aniline
ASTM D3437 : EN-STANDARD PRACTICE FOR SAMPLING AND HANDLING LIQUID CYCLIC PRODUCTS (R 1994)
ASTM D3438 : EN-STANDARD PRACTICE FOR SAMPLING AND HANDLING NAPHTHALENE MALEIC ANHYDRIDE AND PHTHALIC ANHYDRIDE
ASTM D3439 : EN-STANDARD METHODS FOR ASSAY OF ALKALINE CRESYLATE SOLUTIONS FROM PETROLEUM SOURCES
ASTM D344 : EN-Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D3440 : EN-Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
ASTM D3441 : EN-Standard Test Method for Deep Quasi-Static Cone and Friction-Cone Penetration Tests of Soil
ASTM D3442 : EN-STANDARD TEST METHOD FOR TRITIUM CONTENT IN AIR
ASTM D3443 : EN-Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D3444 : EN-Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
ASTM D3445 : EN-STANDARD TEST METHOD FOR NONVOLATILE MATTER IN TRICHLOROTRIFLUOROETHANE (E1-1986)
ASTM D3446 : EN-STANDARD TEST METHOD FOR WATER CONTENT OF TRICHLOROTRIFLUOROETHANE WITH KARL FISCHER REAGENT
ASTM D3447 : EN-STANDARD TEST METHOD FOR PURITY OF TRICHLOROTRIFLUOROETHANE
ASTM D3447 REV A : EN-Standard Test Method for Purity of Halogenated Organic Solvents
ASTM D3448 : EN-Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
ASTM D3449 : EN-STANDARD TEST METHOD FOR SULFUR DIOXIDE IN WORKPLACE ATMOSPHERES (BARIUM PERCHLORATE METHOD) (R 1984) (DISCONTINUED)
ASTM D345 : EN-Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
ASTM D3450 : EN-Standard Test Method for Washability Properties of Interior Architectural Coatings
ASTM D3451 : EN-Standard Practices for Testing Polymeric Powders and Powder Coatings
ASTM D3452 : EN-Standard Practice for Rubber – Identification by Pyrolysis-Gas Chromatography
ASTM D3453 : EN-Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning Bedding and Similar Applications
ASTM D3454 : EN-Standard Test Method for Radium-226 in Water
ASTM D3455 : EN-Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
ASTM D3456 : EN-Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM D3457 : EN-STANDARD METHOD FOR PREPARATION OF METHYL ESTERS FROM FATTY ACIDS FOR DETERMINATION OF FATTY ACID COMPOSITION BY GAS-LIQUID CHROMATOGRAPHY (R 1980)
ASTM D3458 : EN-STANDARD SPECIFICATION FOR COPIES FROM OFFICE COPYING MACHINES FOR PERMANENT RECORDS
ASTM D3459 : EN-Standard Test Method for Humid-Dry Cycling for Coatings on Wood and Wood Products
ASTM D346 : EN-Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D3460 : EN-STANDARD SPECIFICATION FOR WHITE WATERMARKED AND UNWATERMARKED BOND MIMEOGRAPH DUPLICATOR AND XEROGRAPHIC CUT- SIZED OFFICE PAPERS
ASTM D3461 : EN-Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
ASTM D3462 : EN-Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
ASTM D3462 REV A : EN-Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
ASTM D3462/D3462M : EN-Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
ASTM D3462/D3462M REV A : EN-Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
ASTM D3463 : EN-STANDARD PRACTICE FOR COMPRESSION-MOLDING TEST SPECIMENS OF RIGID ACRYLONITRILE-BUTADIENE- STYRENE (ABS) PLASTICS (R 1987) (E1-1987)
ASTM D3464 : EN-Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3465 : EN-Standard Practice for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D3466 : EN-Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM D3467 : EN-Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
ASTM D3468 : EN-STANDARD SPECIFICATION FOR LIQUID-APPLIED NEOPRENE AND CHLOROSULFONATED POLYETHYLENE USED IN ROOFING AND WATERPROOFING
ASTM D3469 : EN-Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
ASTM D347 : EN-STANDARD TEST METHOD FOR VOLUME AND SPECIFIC GRAVITY CORRECTION TABLES FOR CREOSOTE AND COAL TAR (R 1986)
ASTM D3470 : EN-Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child- Resistant Closures
ASTM D3471 : EN-STANDARD TEST METHOD FOR TOP-LOAD-TO-ENGAGE REMOVAL LUGS ON TYPE IA CHILD-RESISTANT CLOSURES
ASTM D3472 : EN-Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
ASTM D3473 : EN-STANDARD TEST METHODS FOR LIFTING FORCE REQUIRED TO REMOVE CERTAIN CHILD-RESISTANT SNAP CAPS
ASTM D3474 : EN-STANDARD PRACTICE FOR CHECKING THE CALIBRATION OF TORQUE METERS USED IN PACKAGING APPLICATIONS (E-189)
ASTM D3475 : EN-Standard Classification of Child-Resistant Packages
ASTM D3475 REV A : EN-Standard Classification of Child-Resistant Packages
ASTM D3476 : EN-Standard Test Method for bis(Chloromethyl) Ether (bis CME) in Workplace Atmospheres (Gas Chromatography – Mass Spectrometry)
ASTM D3477 : EN-Standard Performance Specification for Men’s and Boys’ Woven Dress Shirt Fabrics
ASTM D3477 REV A : EN-Standard Performance Specification for Men’s and Boys’ Woven Dress Shirt Fabrics
ASTM D3478 : EN-STANDARD TEST METHOD FOR CHLORINATED PHENOXY ACID HERBICIDES IN WATER
ASTM D3479/D3479M : EN-Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D348 : EN-STANDARD TEST METHODS FOR RIGID TUBES USED FOR ELECTRICAL INSULATION
ASTM D3480 : EN-Standard Test Methods for Downward Force Required to Open or Activate Child-Resistant Snap-Engagement Packages
ASTM D3481 : EN-Standard Test Method for Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
ASTM D3482 : EN-Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D3482 REV A : EN-Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
ASTM D3483 : EN-Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
ASTM D3484 : EN-Standard Test Methods for Rubber – Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
ASTM D3485 : EN-Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ASTM D3487 : EN-Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D3487 REV A : EN-STANDARD SPECIFICATION FOR MINERAL INSULATING OIL USED IN ELECTRICAL APPARATUS
ASTM D3489 : EN-Standard Test Methods for Rubber – Microcellular Urethane
ASTM D349 : EN-Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
ASTM D3490 : EN-Standard Specification for Flexible Cellular Materials – Bonded Urethane Foam
ASTM D3491 : EN-STANDARD METHODS OF TESTING VULCANIZABLE RUBBER TANK AND PIPE LINING
ASTM D3492 : EN-Standard Specification for Rubber Contraceptives (Male Condoms)
ASTM D3493 : EN-STANDARD TEST METHOD FOR CARBON BLACK – N-DIBUTYL PHTHALATE ABSORPTION NUMBER OF COMPRESSED SAMPLE
ASTM D3493 REV A : EN-STANDARD TEST METHOD FOR CARBON BLACK – N-DIBUTYL PHTHALATE ABSORPTION NUMBER OF COMPRESSED SAMPLE
ASTM D3494 : EN-Standard Specification for Water-Emulsion Floor Polish Remover
ASTM D3495 : EN-Standard Test Method for Hexane Extraction of Leather
ASTM D3496 : EN-Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
ASTM D3497 : EN-Standard Test Method for Dynamic Modulus of Asphalt Mixtures
ASTM D3498 : EN-Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
ASTM D3499 : EN-STANDARD TEST METHOD FOR TOUGHNESS OF PLYWOOD (R 1986)
ASTM D350 : EN-Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ASTM D3500 : EN-Standard Test Methods for Structural Panels in Tension
ASTM D3501 : EN-STANDARD METHODS OF TESTING PLYWOOD IN COMPRESSION (R 1986)
ASTM D3501 REV A : EN-Standard Test Methods for Wood-Based Structural Panels in Compression
ASTM D3502 : EN-Standard Test Method for Moisture Absorption of Compressed Wood Products
ASTM D3503 : EN-Standard Test Method for Swelling and Recovery of Copmressed Wood Products Due to Moisture Absorption
ASTM D3504 : EN-STANDARD SPECIFICATION FOR MALEIC ANHYDRIDE
ASTM D3505 : EN-STANDARD TEST METHOD FOR DENSITY OR RELATIVE DENSITY OF PURE LIQUID CHEMICALS
ASTM D3506 : EN-STANDARD SPECIFICATION FOR INHIBITED GRADE METHYLENE CHLORIDE FOR PREPARING PENTACHLORAPHENOL SOLUTIONS
ASTM D3507 : EN-Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating between Heartwood and Sapwood
ASTM D3508 : EN-Standard Method for Evaluating Water Testing Membrane Filters for Fecal Coliform Recovery
ASTM D3509 : EN-STANDARD TEST METHOD FOR ELECTROSTATIC FIELD STRENGTH DUE TO SURFACE CHARGES
ASTM D351 : EN-Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
ASTM D3510 : EN-STANDARD TEST METHOD FOR DIAMETER OF WOOL AND OTHER ANIMAL FIBERS BY IMAGE ANALYSER
ASTM D3511 : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511 REV A : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511/D3511M : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3512 : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester Method
ASTM D3512 REV A : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D3512/D3512M : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D3513 : EN-Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
ASTM D3514 : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
ASTM D3515 : EN-STANDARD SPECIFICATION FOR HOT-MIXED HOT-LAID BITUMINOUS PAVING MIXTURES
ASTM D3516 : EN-STANDARD PRACTICES FOR ASHING CELLULOSE (R 1985)
ASTM D3517 : EN-STANDARD SPECIFICATION FOR REINFORCED PLASTIC MORTAR PRESSURE PIPE
ASTM D3518 : EN-STANDARD PRACTICE FOR INPLANE SHEAR STRESS- STRAIN RESPONSE OF UNIDIRECTIONAL REINFORCED PLASTICS (R 1982)
ASTM D3518/D3518M : EN-Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/-45 Degree Laminate
ASTM D3519 : EN-STANDARD TEST METHOD FOR FOAM IN AQUEOUS MEDIA (BLENDER TEST) (R 1982)
ASTM D352 : EN-Standard Test Methods for Pasted Mica Used in Electrical Insulation
ASTM D3520 : EN-Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)-(Withdrawn 2003; No Replacement)
ASTM D3521 : EN-STANDARD TEST METHOD FOR SURFACE WAX COATING ON CORRUGATED BOARD (R 1981)(E1-1981)
ASTM D3522 : EN-Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing
ASTM D3523 : EN-STANDARD TEST METHOD FOR SPONTANEOUS HEATING VALUES OF LIQUIDS AND SOLIDS (DIFFERENTIAL MACKEY TEST)
ASTM D3524 : EN-STANDARD TEST METHOD FOR DIESEL FUEL DILUENT IN USED DIESEL ENGINE OILS BY GAS CHROMATOGRAPHY
ASTM D3525 : EN-Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
ASTM D3527 : EN-Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
ASTM D3528 : EN-STANDARD TEST METHOD FOR STRENGTH PROPERTIES OF DOUBLE LAP SHEAR ADHESIVE JOINTS BY TENSION LOADING (R 1981)
ASTM D3529 : EN-STANDARD TEST METHOD FOR RESIN SOLIDS CONTENT OF CARBON FIBER-EPOXY PREPREG (R 1989)
ASTM D3529/D3529M : EN-Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM D353 : EN-Standard Specification for Natural Rubber Insulation for Wire and Cable 60 Degrees C Operation
ASTM D3530 : EN-STANDARD TEST METHOD FOR VOLATILES CONTENT OF CARBON FIBER-EPOXY PREPREG (R 1989)
ASTM D3530/D3530M : EN-Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D3531 : EN-Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D3532 : EN-Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
ASTM D3533 : EN-Standard Method of Testing Rubber – Nitrogen Content
ASTM D3534 : EN-Standard Test Method for Polychlorinated Biphenyls (PCBs) in Water
ASTM D3535 : EN-Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D3535 REV A : EN-Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D3536 : EN-Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution by Liquid Exclusion Chromatography (GEL Permeation Chromatography – GPC)
ASTM D3539 : EN-Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer
ASTM D3540 : EN-Standard Specification for Primary Amyl Acetate Synthetic (98% Grade)
ASTM D3541 : EN-Standard Specification for 2-Ethylhexyl Acrylate
ASTM D3542 : EN-Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
ASTM D3543 : EN-STANDARD TEST METHOD FOR METAL GLIDE ADHESION
ASTM D3544 : EN-Standard Guide for Reporting Test Methods and Results on High Modulus Fibers
ASTM D3545 : EN-STANDARD TEST METHOD FOR ALCOHOL CONTENT AND PURITY OF ACETATE ESTERS BY GAS CHROMATOGRAPHY
ASTM D3546 : EN-STANDARD TEST METHOD FOR FORMIC ACID IN GLACIAL ACETIC ACID
ASTM D3547 : EN-Standard Specification for n-Butyl Acrylate
ASTM D3548 : EN-Standard Specification for Ethyl Acrylate
ASTM D3549 : EN-STANDARD TEST METHOD FOR THICKNESS OR HEIGHT OF COMPACTED BITUMINOUS PAVING MIXTURE SPECIMENS (R 1987)
ASTM D3549 REV A : EN-Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D3550 : EN-Standard Practice for Thick Wall Ring-Lined Split Barrel Drive Sampling of Soils
ASTM D3551 : EN-Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
ASTM D3552 : EN-Standard Test Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites
ASTM D3552/D3552M : EN-Test Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites
ASTM D3553 : EN-Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites
ASTM D3554 : EN-STANDARD SPECIFICATION FOR TRACK-RESISTANT BLACK THERMOPLASTIC HIGH-DENSITY POLYETHYLENE INSULATION FOR WIRE AND CABLE
ASTM D3555 : EN-Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable 90 °C Operation
ASTM D3556 : EN-Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
ASTM D3557 : EN-Standard Test Methods for Cadmium in Water
ASTM D3558 : EN-STANDARD TEST METHODS FOR COBALT IN WATER (E1-1986)
ASTM D3559 : EN-Standard Test Methods for Lead in Water
ASTM D3560 : EN-STANDARD TEST METHOD FOR OXYGEN DEMAND IN WATER BY COMBUSTION-INFRARED ANALYSIS
ASTM D3561 : EN-Standard Test Method for Lithium Potassium and Sodium Ions in Brackish Water Seawater and Brines by Atomic Absorption Spectrophotometry
ASTM D3562 : EN-Standard Performance Specification for Woven Drycleanable Coat Fabrics
ASTM D3562 REV A : EN-Standard Performance Specification for Men’s and Boys’ Woven Dress Topcoat and Dress Overcoat Fabrics
ASTM D3564 : EN-STANDARD PRACTICE FOR APPLICATION OF FLOOR POLISHES TO MAINTAIN VINYL ASBESTOS TILE OR FLOORING
ASTM D3565 : EN-Standard Test Method for Tableware Pattern Removal by Mechanical Dishwasher Detergents
ASTM D3566 : EN-Standard Practice for Rubber-Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM D3567 : EN-Standard Practice for Determining Dimensions of -Fiberglass- (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D3568 : EN-STANDARD TEST METHODS FOR RUBBER – EVALUATION OF EPDM (ETHYLENE PROPYLENE DIENE TERPOLYMERS) INCLUDING MIXTURES WITH OIL
ASTM D3569 : EN-Standard Specification for Joint Sealant Hot-Applied Elastomeric Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements
ASTM D3570 : EN-STANDARD TEST METHOD FOR VISCOSITY OF MATERIALS WITH A SLIDING PLATE MICROVISCOMETER
ASTM D3571 : EN-Standard Consumer Product Specification for Household Laundry and Dishwasher Water Inlet Hose
ASTM D3571 REV A : EN-STANDARD CONSUMER PRODUCT SPECIFICATION FOR HOUSEHOLD LAUNDRY AND DISHWASHER WATER INLET HOSE
ASTM D3572 : EN-STANDARD CONSUMER PRODUCT SPECIFICATION FOR HOUSEHOLD LAUNDRY AND DISHWASHER DRAIN HOSE
ASTM D3573 : EN-STANDARD CONSUMER PRODUCT SPECIFICATION FOR SINK SPRAY HOSE
ASTM D3574 : EN-Standard Test Methods for Flexible Cellular Materials – Slab Bonded and Molded Urethane Foams
ASTM D3575 : EN-Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
ASTM D3576 : EN-Standard Test Method for Cell Size of Rigid Cellular Plastics
ASTM D3577 : EN-Standard Specification for Rubber Surgical Gloves
ASTM D3577 REV A : EN-Standard Specification for Rubber Surgical Gloves
ASTM D3578 : EN-Standard Specification for Rubber Examination Gloves
ASTM D3578 REV A : EN-Standard Specification for Rubber Examination Gloves
ASTM D3579 : EN-Standard Specification for Rubber Surgical Drainage Tubes Penrose-Type
ASTM D358 : EN-STANDARD SPECIFICATION FOR WOOD TO BE USED AS PANELS IN WEATHERING TESTS OF COATINGS (R 1988)
ASTM D3580 : EN-STANDARD TEST METHOD OF VIBRATION (VERTICAL SINUSOIDAL MOTION) TEST OF PRODUCTS
ASTM D3581 : EN-Standard Specification for Joint Sealant Hot-Applied Jet-Fuel-Resistant Type for Portland Cement Concrete and Tar-Concrete Pavements
ASTM D3582 : EN-Standard Test Methods for Joint Sealant Hot-Poured Jet-Fuel-Resistant Type for Portland Cement Concrete and Tar-Concrete Pavements
ASTM D3583 : EN-Standard Methods of Testing Joint Sealant Hot-Applied Elastomeric-Type for Portland Cement Concrete Pavements or Joint Sealant Hot-Applied Elastomeric Jet-Fuel-Resistant-Type for Portland Cement Concrete Pave
ASTM D3584 : EN-Standard Practice for Indexing Papers and Reports on Soil and Rock for Engineering Purposes
ASTM D3585 : EN-Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D3586 : EN-STANDARD TEST METHOD FOR CHROMIUM IN WORKPLACE ATMOSPHERES (COLORIMETRIC METHOD)
ASTM D3588 : EN-STANDARD METHOD OF CALCULATING CALORIFIC VALUE AND SPECIFIC GRAVITY (RELATIVE DENSITY) OF GASEOUS FUELS
ASTM D3589 : EN-STANDARD TEST METHOD FOR TOTAL NITROGEN IN WATER BY MICROCOULOMETRY
ASTM D3590 : EN-STANDARD TEST METHODS FOR TOTAL KJELDAHL NITROGEN IN WATER
ASTM D3591 : EN-Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
ASTM D3592 : EN-STANDARD RECOMMENDED PRACTICE FOR DETERMINING MOLECULAR WEIGHT BY VAPOR PRESSURE OSMOMETRY
ASTM D3593 : EN-STANDARD TEST METHOD FOR MOLECULAR WEIGHT AVERAGES AND MOLECULAR WEIGHT DISTRIBUTION OF CERTAIN POLYMERS BY LIQUID SIZE-EXCLUSION CHROMATOGRAPHY (GEL PERMEATION CHROMATOGRAPHY – GPC) USING UNIVERSAL CALIBRATION (R 19
ASTM D3594 : EN-Standard Test Method for Copolymerized Ethyl Acrylate in Ethylene-Ethyl Acrylate Copolymers
ASTM D3595 : EN-STANDARD SPECIFICATION FOR POLYCHLOROTRIFLUORO- ETHYLENE (PCTFE) EXTRUDED PLASTIC SHEET AND FILM (R 1989)
ASTM D3596 : EN-STANDARD PRACTICE FOR DETERMINATION OF GELS (FISHEYES) IN GENERAL- PURPOSE POLY(VINYL CHLORIDE) (PVC) RESINS
ASTM D3597 : EN-STANDARD SPECIFICATION FOR WOVEN UPHOLSTERY FABRICS – PLAIN TUFTED OR FLOCKED
ASTM D3597 REV A : EN-Standard Specification for Woven Upholstery Fabrics – Plain Tufted or Flocked
ASTM D3598 : EN-Standard Test Method for Citrate in Synthetic Detergents
ASTM D3599 : EN-STANDARD TEST METHOD FOR FELTABILITY OF WOOL
ASTM D36 : EN-Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D36/D36M : EN-Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D360 : EN-Standard Specification for Shellac Varnishes
ASTM D3600 : EN-STANDARD PERFORMANCE SPECIFICATION FOR MEN’S AND BOYS’ WOVEN RAINWEAR AND ALL-PURPOSE WATER- REPELLENT COAT FABRICS
ASTM D3601 : EN-Standard Test Method for Foam in Aqueous Media (Bottle Test)
ASTM D3602 : EN-STANDARD FIELD TEST METHOD FOR WATER- SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS-(Discontinued 1994; No Replacement)
ASTM D3602 REV A : EN-Standard Field Test Method for Water-Separation Characteristics of Aviation Turbine Fuels
ASTM D3603 : EN-Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
ASTM D3604 : EN-STANDARD TEST METHOD FOR VOLUME CHANGE OF ELASTOMERIC MATERIALS IN HYDRAULIC FLUIDS UNDER STATIC CONDITIONS
ASTM D3605 : EN-STANDARD TEST METHOD FOR TRACE METALS IN GAS TURBINE FUELS BY ATOMIC ABSORPTION AND FLAME EMISSION SPECTROSCOPY
ASTM D3606 : EN-Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography (PNS 894:1993)
ASTM D3606 REV A : EN-Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
ASTM D3607 : EN-Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
ASTM D3608 : EN-STANDARD TEST METHOD FOR NITROGEN OXIDES (COMBINED) CONTENT IN THE ATMOSPHERE BY THE GRIESS-SALTZMAN REACTION
ASTM D3609 : EN-Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D3610 : EN-Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Tiration Method
ASTM D3611 : EN-STANDARD PRACTICE FOR ACCELERATED AGING OF PRESSURE-SENSITIVE TAPES (R 1986) (E1-1981)
ASTM D3612 : EN-Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
ASTM D3613 : EN-Standard Test Methods of Sampling Electrical Insulating Oils for Gas Analysis and Determination of Water Content
ASTM D3614 : EN-Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
ASTM D3615 : EN-STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF THERMOSET MOLDING COMPOUNDS USED IN THE MANUFACTURE OF MOLDED FITTINGS (E1-1978)
ASTM D3616 : EN-Standard Test Method for Rubber-Determination of Gel Swelling Index and Dilute Solution Viscosity
ASTM D3617 : EN-Standard Practice for Sampling and Analysis of New Built-Up Roof Membranes
ASTM D3618 : EN-Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D3618 REV A : EN-Standard Test Method for Detection of Lead in Paint and Dried Paint Films
ASTM D3619 : EN-Standard Specification for Aluminum Silicate Pigments (Anhydrous)
ASTM D362 : EN-STANDARD SPECIFICATION FOR INDUSTRIAL GRADE TOLUENE
ASTM D3620 : EN-Standard Specification for Glacial Acetic Acid
ASTM D3621 : EN-STANDARD PRACTICE FOR DETERMINATION OF WATER IN ACETATE ESTERS
ASTM D3622 : EN-STANDARD SPECIFICATION FOR N-PROPYL ALCOHOL (1-PROPANOL)
ASTM D3623 REV A : EN-Standard Test Method for Testing Antifouling Panels in Shallow Submergence
ASTM D3624 REV A : EN-Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3625 : EN-Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
ASTM D3626 : EN-Standard Test Method for Tar Acid Composition by Gas-Liquid Chromatography
ASTM D3627 : EN-Standard Test Method for Color of Cresylic Acids (“C” Series Standards)
ASTM D3628 : EN-STANDARD PRACTICE FOR SELECTION AND USE OF EMULSIFIED ASPHALTS
ASTM D3628 REV A : EN-Standard Practice for Selection and Use of Emulsified Asphalts (AASHTO R5)
ASTM D3629 : EN-Standard Test Method for Rubber Property – Cut Growth Resistance
ASTM D363 : EN-Standard Specification for Tricresyl Phosphate
ASTM D3630 : EN-STANDARD PRACTICE FOR DETERMINING CONSTITUENTS CLASSIFIED AS HAZARDOUS CONTAINED IN PROTECTIVE COATINGS (R 1981) (E1-1981)
ASTM D3631 : EN-Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D3632 : EN-Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D3633 : EN-STANDARD TEST METHOD FOR ELECTRICAL RESISTIVITY OF MEMBRANE-PAVEMENT SYSTEMS
ASTM D3651 : EN-Standard Test Method for Barium in Brackish Water Seawater and Brines
ASTM D3652 : EN-STANDARD TEST METHOD FOR THICKNESS OF PRESSURE- SENSITIVE AND GUMMED TAPES (R 1988)
ASTM D3652/D3652M : EN-Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes
ASTM D3652M : EN-Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes (Metric)
ASTM D3654 : EN-STANDARD TEST METHOD FOR HOLDING POWER OF PRESSURE-SENSITIVE TAPES
ASTM D3654/D3654M : EN-Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
ASTM D3654M : EN-STANDARD TEST METHOD FOR HOLDING POWER OF PRESSURE-SENSITIVE TAPES (METRIC) (R 1993) (E1-1993)
ASTM D3655 : EN-STANDARD PERFORMANCE SPECIFICATION FOR MEN´S AND WOMEN´S SLIVER KNITTED OVERCOAT AND JACKET FABRICS
ASTM D3656 : EN-Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
ASTM D3657 : EN-Standard Specification for Zipper Dimensions
ASTM D3658 : EN-STANDARD PRACTICE FOR DETERMINING THE TORQUE STRENGTH OF ULTRAVIOLET (UV) LIGHT-CURED GLASS/ METAL ADHESIVE JOINTS (R 1984)
ASTM D3659 : EN-Standard Test Method for Flammability of Apparel Fabrics by Semi-Restraint Method
ASTM D3660 : EN-STANDARD TEST METHOD FOR STAPLE LENGTH OF MAN-MADE FIBERS AVERAGE AND DISTRIBUTION (FIBER ARRAY METHOD)
ASTM D3661 : EN-STANDARD TEST METHOD FOR STAPLE LENGTH OF MAN- MADE FIBERS AVERAGE AND DISTRIBUTION (SINGLE- FIBER LENGTH MACHINE METHOD)
ASTM D3662 : EN-STANDARD TEST METHOD FOR BURSTING STRENGTH OF PRESSURE-SENSITIVE TAPES
ASTM D3662/D3662M : EN-Standard Test Method for Bursting Strength of Pressure-Sensitive Tapes
ASTM D3662M : EN-STANDARD TEST METHOD FOR BURSTING STRENGTH OF PRESSURE-SENSITIVE TAPES (METRIC)
ASTM D3663 : EN-STANDARD TEST METHOD FOR SURFACE AREA OF CATALYSTS
ASTM D3664 : EN-Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
ASTM D3665 : EN-Standard Practice for Random Sampling of Construction Materials
ASTM D3666 : EN-STANDARD PRACTICE FOR EVALUATION OF INSPECTION AND TESTING AGENCIES FOR BITUMINOUS PAVING MATERIALS
ASTM D3666 REV A : EN-STANDARD SPECIFICATION FOR MINIMUM REQUIREMENTS FOR AGENCIES TESTING AND INSPECTING BITUMINOUS PAVING MATERIALS
ASTM D3667 : EN-Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D3668 : EN-Standard Test Method for Bearing Ratio of Laboratory Compacted Soil-Lime Mixtures
ASTM D367 : EN-STANDARD TEST METHOD FOR XYLENE-INSOLUBLE MATTER IN CREOSOTE (AASHTO NO. T 81)
ASTM D3670 : EN-Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D3672 : EN-STANDARD SPECIFICATION FOR VENTING ASPHALT- SATURATED AND COATED INORGANIC FELT BASE SHEET USED IN ROOFING
ASTM D3673 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF ALPHA OLEFIN SULFONATES
ASTM D3674 : EN-Standard Test Method for Carbon Black – Relative Extrusion Mass
ASTM D3674 REV A : EN-STANDARD TEST METHOD FOR CARBON BLACK-RELATIVE EXTRUSION MASS
ASTM D3675 : EN-Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3675 REV A : EN-Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D3676 : EN-Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
ASTM D3676 REV A : EN-Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
ASTM D3677 : EN-Standard Test Methods for Rubber – Identification by Infrared Spectrophotometry
ASTM D3678 : EN-RIGID POLY(VINYL CHLORIDE) (PVC) INTERIOR-PROFILE EXTRUSIONS SPEC. FOR
ASTM D3679 : EN-STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE) (PVC) SIDING
ASTM D3679 REV A : EN-STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE) (PVC) SIDING
ASTM D3679 REV B : EN-Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D3679 REV C : EN-Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D368 : EN-STANDARD TEST METHOD FOR SPECIFIC GRAVITY OF CREOSOTE AND OIL-TYPE PRESERVATIVES (AASHTO NO. T 86)
ASTM D3680 : EN-STANDARD TEST METHOD FOR RESIDUAL VINYL CHLORIDE MONOMER CONTENT OF POLY(VINYL CHLORIDE) RESINS COMPOUNDS AND COPOLYMERS BY SOLUTION INJECTION TECHNIQUE
ASTM D3681 : EN-STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF “FIBERGLASS” (GLASS- FIBER-REINFORCED THERMOSETTING-RESIN) PIPE IN A DEFLECTED CONDITION
ASTM D3682 : EN-STANDARD TEST METHOD FOR MAJOR AND MINOR ELEMENTS IN COAL AND COKE ASH BY ATOMIC ABSORPTION (R 1983)
ASTM D3683 : EN-Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D3684 : EN-Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
ASTM D3685 : EN-STANDARD TEST METHOD FOR PARTICULATES INDEPENDENTLY OR FOR PARTICULATES AND COLLECTED RESIDUE SIMULTANEOUSLY IN STACK GASES (R 1990)
ASTM D3685/D3685M : EN-Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
ASTM D3686 : EN-STANDARD PRACTICE FOR SAMPLING ATMOSPHERES TO COLLECT ORGANIC COMPOUND VAPORS (ACTIVATED CHARCOAL TUBE ADSORPTION METHOD)
ASTM D3687 : EN-Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D3688 : EN-STANDARD GUIDE FOR REPORTING THE CHARACTERIZATION OF SMOKING PRODUCT ATMOSPHERES USED TO EXPOSE BIOLOGICAL SYSTEMS
ASTM D3689 : EN-STANDARD METHOD OF TESTING INDIVIDUAL PILES UNDER STATIC AXIAL TENSILE LOAD
ASTM D369 : EN-Standard Test Method for Specific Gravity of Creosote Fractions and Residue
ASTM D3690 : EN-Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor
ASTM D3690 REV A : EN-Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics – Indoor
ASTM D3691 : EN-STANDARD PERFORMANCE SPECIFICATION FOR WOVEN LACE AND KNIT HOUSEHOLD CURTAIN AND DRAPERY FABRICS
ASTM D3691 REV A : EN-Standard Performance Specification for Woven Lace and Knit Household Curtain and Drapery Fabrics
ASTM D3691/D3691M : EN-Standard Performance Specification for Woven Lace and Knit Household Curtain and Drapery Fabrics
ASTM D3692 : EN-STANDARD PRACTICE FOR SELECTION OF ZIPPERS FOR CARE-LABELED APPAREL AND HOUSEHOLD FURNISHINGS
ASTM D3693 : EN-Standard Specification for Labeled Length per Holder of Sewing Thread
ASTM D3694 : EN-STANDARD PRACTICES FOR PREPARATION OF SAMPLE CONTAINERS AND FOR PRESERVATION OF ORGANIC CONSTITUENTS
ASTM D3695 : EN-STANDARD TEST METHOD FOR VOLATILE ALCOHOLS IN WATER BY DIRECT AQUEOUS -INJECTION GAS CHROMATOGRAPHY
ASTM D3696 : EN-Standard Practice for Evaluating an Effluent for Flavor Impairment to Fish Flesh