STD-ASTM C XXXX

아래 ASTM (American Society for Testing and Materials) 규격 목록은 규격번호와 제목을 발췌, 나열한 것입니다.
[출처 : www.astm.org ]

ASTM A , ASTM B , ASTM C | 1 || 2 || 3 |, ASTM D , ASTM E , ASTM F , ASTM G ,

[ASTM C000 – C999]

ASTM C10 : EN-Standard Specification for Natural Cement
ASTM C10/C10M : EN-Standard Specification for Natural Cement
ASTM C1000 : EN-Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry
ASTM C1001 : EN-Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy
ASTM C1002 : EN-Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
ASTM C1002 REV A : EN-Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases
ASTM C1003 : EN-Standard Test Method for Thermal Performance of Cooling-Air Duct Sections Using a Calibrated Hot Box
ASTM C1004 : EN-Standard Matrix for LWR Spent Fuel Receiving and Storage
ASTM C1005 : EN-Standard Specification for Reference Masses and Devices for Determining Mass for Use in the Physical Testing of Hydraulic Cements
ASTM C1006 : EN-Standard Test Method for Splitting Tensile Strength of Masonry Units
ASTM C1007 : EN-STANDARD SPECIFICATION FOR INSTALLATION OF LOAD BEARING (TRANSVERSE AND AXIAL) STEEL STUDS AND RELATED ACCESSORIES (R 1990)
ASTM C1007 REV A : EN-Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
ASTM C1008 : EN-STANDARD SPECIFICATION FOR SINTERED (URANIUM- PLUTONIUM) DIOXIDE PELLETS – FAST REACTOR FUEL
ASTM C1009 : EN-STANDARD GUIDE FOR ESTABLISHING A QUALITY ASSURANCE PROGRAM FOR ANALYTICAL CHEMISTRY LABORATORIES WITHIN THE NUCLEAR INDUSTRY
ASTM C1010 : EN-Standard Guide for Acceptance Checkout and Pre-Operational Testing of a Nuclear Fuels Reprocessing Facility
ASTM C1011 : EN-Standard Guide for Selection or Specification of Electrodeless Conductivity Instruments for the Nuclear Fuel Cycle
ASTM C1012 : EN-STANDARD TEST METHOD FOR LENGTH CHANGE OF HYDRAULIC-CEMENT MORTARS EXPOSED TO A SULFATE SOLUTION
ASTM C1012 REV A : EN-Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM C1012/C1012M : EN-Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM C1013 : EN-STANDARD SPECIFICATION FOR MEMBRANE-FACED RIGID CELLULAR POLYURETHANE ROOF INSULATION
ASTM C1014 : EN-Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
ASTM C1014 REV A : EN-Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
ASTM C1015 : EN-Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
ASTM C1016 : EN-STANDARD TEST METHOD FOR DETERMINATION OF WATER ABSORPTION BY SEALANT BACKUP (JOINT FILLER) MATERIAL
ASTM C1016 REV A : EN-Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
ASTM C1017 : EN-Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
ASTM C1017/C1017M : EN-Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
ASTM C1018 : EN-STANDARD TEST METHOD FOR FLEXURAL TOUGHNESS AND FIRST-CRACK STRENGTH OF FIBER-REINFORCED CONCRETE (USING BEAM WITH THIRD-POINT LOADING)
ASTM C1018 REV A : EN-STANDARD TEST METHOD FOR FLEXURAL TOUGHNESS AND FIRST-CRACK STRENGTH OF FIBER-REINFORCED CONCRETE (USING BEAM WITH THIRD-POINT LOADING)
ASTM C1018 REV B : EN-Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading)
ASTM C1019 : EN-STANDARD METHOD OF SAMPLING AND TESTING GROUT
ASTM C1019 REV A : EN-Standard Test Method for Sampling and Testing Grout
ASTM C1019 REV B : EN-Standard Test Method for Sampling and Testing Grout
ASTM C1020 : EN-Standard Matrix for Light Water Reactor Fuel Reprocessing
ASTM C1021 : EN-Standard Practice for Laboratories Engaged in the Testing of Building Sealants
ASTM C1022 : EN-Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
ASTM C1023 : EN-Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
ASTM C1025 : EN-STANDARD TEST METHOD FOR MODULUS OF RUPTURE IN BENDING OF ELECTRODE GRAPHITE
ASTM C1026 : EN-STANDARD TEST METHOD FOR MEASURING THE RESISTANCE OF CERAMIC TILE TO FREEZE-THAW CYCLING
ASTM C1027 : EN-Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
ASTM C1028 : EN-Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM C1029 : EN-Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
ASTM C1029 REV A : EN-Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
ASTM C1030 : EN-STANDARD TEST METHOD FOR DETERMINATION OF PLUTONIUM ISOTOPIC COMPOSITION BY GAMMA-RAY SPECTROMETRY
ASTM C1031 : EN-Standard Specification for Nuclear-Grade Aluminum Oxide Powder
ASTM C1032 : EN-Standard Specification for Woven Wire Plaster Base
ASTM C1033 : EN-Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically
ASTM C1034 : EN-Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Cookwear
ASTM C1035 : EN-Standard Specification for Lead and Cadmium Extracted from Glazed Ceramic Cookwear
ASTM C1036 : EN-STANDARD SPECIFICATION FOR FLAT GLASS
ASTM C1037 : EN-Standard Practice for Inspection of Underground Precast Concrete Utility Structures
ASTM C1038 : EN-STANDARD TEST METHOD FOR EXPANSION OF PORTLAND CEMENT MORTAR BARS STORED IN WATER
ASTM C1039 : EN-Standard Test Methods for Apparent Porosity Apparent Specific Gravity and Bulk Density of Graphite Electrodes
ASTM C1040 : EN-Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete Including Roller Compacted Concrete By Nuclear Methods
ASTM C1040/C1040M : EN-Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete Including Roller Compacted Concrete By Nuclear Methods
ASTM C1041 : EN-Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
ASTM C1042 : EN-Standard Test Method for Bond Strength of Latex Systems Used with Concrete by Slant Shear
ASTM C1043 : EN-Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
ASTM C1044 : EN-Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
ASTM C1045 : EN-STANDARD PRACTICE FOR CALCULATING THERMAL TRANSMISSION PROPERTIES FROM STEADY-STATE HEAT FLUX MEASUREMENTS
ASTM C1046 : EN-Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM C1047 : EN-Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
ASTM C1048 : EN-STANDARD SPECIFICATION FOR HEAT-TREATED FLAT GLASS – KIND HS KIND FT COATED AND UNCOATED GLASS
ASTM C1068 : EN-Standard Guide for Qualification of Measurement Methods by a Laboratory within the Nuclear Industry
ASTM C1069 : EN-Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
ASTM C107 : EN-STANDARD METHOD OF PANEL SPALLING TESTING HIGH-DUTY FIRECLAY BRICK
ASTM C1070 : EN-Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM C1071 : EN-STANDARD SPECIFICATION FOR THERMAL AND ACOUSTICAL INSULATION (MINERAL FIBER DUCT LINING MATERIAL) (E1-1988)
ASTM C1072 : EN-Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072 REV A : EN-Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1072 REV B : EN-Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C1073 : EN-STANDARD TEST METHOD FOR HYDRAULIC ACTIVITY OF GROUND SLAG BY REACTION WITH ALKALI
ASTM C1073 REV A : EN-Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
ASTM C1074 : EN-Standard Practice for Estimating Concrete Strength by the Maturity Method
ASTM C1075 : EN-Standard Practices for Sampling Uranium-Ore Concentrate
ASTM C1076 : EN-Standard Specification for Nuclear Grade Hafnium Oxide Pellets
ASTM C1077 : EN-Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1077 REV A : EN-STANDARD PRACTICE FOR LABORATORIES TESTING CONCRETE AND CONCRETE AGGREGATES FOR USE IN CONSTRUCTION AND CRITERIA FOR LABORATORY EVALUATION
ASTM C1077 REV B : EN-Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
ASTM C1078 : EN-Standard Test Methods for Determining the Cement Content of Freshly Mixed Concrete
ASTM C1079 : EN-Standard Test Methods for Determining the Water Content of Freshly Mixed Concrete
ASTM C108 : EN-Standard Symbols for Heat Transmission
ASTM C1080 : EN-Standard Specification for Asbestos-Cement Products Other Than Fill for Cooling Towers
ASTM C1081 : EN-Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
ASTM C1082 : EN-STANDARD SPECIFICATION FOR ASBESTOS-CEMENT FLAT SHEET FOR COOLING TOWER FILL
ASTM C1083 : EN-STANDARD TEST METHOD FOR WATER ABSORPTION OF CELLULAR ELASTOMERIC GASKETS AND SEALING MATERIALS
ASTM C1084 : EN-Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
ASTM C1085 : EN-Standard Specification for Butyl Rubber-Based Solvent-Release Sealants
ASTM C1086 : EN-Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
ASTM C1086 REV A : EN-Standard Specification for Glass Fiber Felt Thermal Insulation
ASTM C1087 : EN-Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C1088 : EN-Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
ASTM C1088 REV A : EN-Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
ASTM C1089 : EN-Standard Specification for Spun Cast Prestressed Concrete Poles
ASTM C109 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTARS (USING 2-IN. OR 50-MM CUBE SPECIMENS)
ASTM C109 REV A : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTARS (USING 2-IN. OR 50-MM CUBE SPECIMENS)
ASTM C109/C109M : EN-Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C1090 : EN-STANDARD TEST METHOD FOR MEASURING CHANGES IN HEIGHT OF CYLINDRICAL SPECIMENS FROM HYDRAULIC-CEMENT GROUT
ASTM C1091 : EN-Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM C1091 REV A : EN-Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM C1092 : EN-Standard Specification for Glass Reinforced Concrete D-Load Culvert Storm Drain and Sewer Pipe
ASTM C1093 : EN-Standard Practice for Accreditation of Testing Agencies for Unit Masonry
ASTM C1094 : EN-Standard Guide for Flexible Removable Insulation Covers
ASTM C1095 : EN-STANDARD PRACTICE FOR CALCULATING PRECISION DATA ON REFRACTORIES (C08) FROM INTERLABORATORY TEST RESULTS
ASTM C1095 REV A : EN-Standard Practice for Calculating Precision Data on Refractories (C08) from Interlaboratory Test Results
ASTM C1096 : EN-STANDARD TEST METHOD FOR DETERMINATION OF WOOD FIBER IN ASBESTOS CEMENT
ASTM C1097 : EN-STANDARD SPECIFICATION FOR HYDRATED LIME FOR USE IN ASPHALTIC- CONCRETE MIXTURES
ASTM C1097 REV A : EN-Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
ASTM C1098 : EN-Standard Specification for Nuclear-Grade Hafnium Oxide Powder-(Discontinued 2002; No Replacement)
ASTM C1099 : EN-Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
ASTM C11 : EN-Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11 REV A : EN-STANDARD DEFINITIONS OF TERMS RELATING TO GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS
ASTM C11 REV B : EN-STANDARD TERMINOLOGY RELATING TO GYPSUM AND RELATED BUILDING MATERIALS AND SYSTEMS
ASTM C11 REV C : EN-Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C11 REV D : EN-Standard Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C110 : EN-Standard Test Methods for Physical Testing of Quicklime Hydrated Lime and Limestone
ASTM C110 REV A : EN-Standard Test Methods for Physical Testing of Quicklime Hydrated Lime and Limestone
ASTM C110 REV B : EN-STANDARD TEST METHODS FOR PHYSICAL TESTING OF QUICKLIME HYDRATED LIME AND LIMESTONE
ASTM C1100 : EN-Standard Test Method for Ribbon Thermal Shock Testing of Refractory Materials
ASTM C1101/C1101M : EN-Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
ASTM C1102 : EN-STANDARD TEST METHOD FOR TIME OF SETTING OF PORTLAND-CEMENT PASTES CONTAINING ACCELERATING ADMIXTURES FOR SHOTCRETE BY THE USE OF GILLMORE NEEDLES
ASTM C1103 : EN-STANDARD PRACTICE FOR JOINT ACCEPTANCE TESTING OF INSTALLED PRECAST CONCRETE PIPE SEWER LINES
ASTM C1103M : EN-Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
ASTM C1104/C1104M : EN-Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM C1105 : EN-Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
ASTM C1105 REV A : EN-Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
ASTM C1106 : EN-Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
ASTM C1107 : EN-Standard Specification for Packaged Dry Hydraulic-Cement Grout (Nonshrink)
ASTM C1107 REV A : EN-Standard Specification for Packaged Dry Hydraulic-Cement Grout (Nonshrink)
ASTM C1107/C1107M : EN-Standard Specification for Packaged Dry Hydraulic-Cement Grout (Nonshrink)
ASTM C1107/C1107M REV A : EN-Standard Specification for Packaged Dry Hydraulic-Cement Grout (Nonshrink)
ASTM C1108 : EN-Standard Test Method for Plutonium by Controlled-Potential Coulometry
ASTM C1109 : EN-STANDARD TEST METHOD FOR ANALYSIS OF AQUEOUS LEACHATES FROM NUCLEAR WASTE MATERIALS USING INDUCTIVELY COUPLED PLASMA-ATOMIC EMISSION SPECTROMETRY
ASTM C1110 : EN-Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM C1111 : EN-Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM C1112 : EN-Standard Guide for Application of Radiation Monitors to the Control and Physical Security of Special Nuclear Material
ASTM C1113 : EN-Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C1113/C1113M : EN-Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C1114 : EN-STANDARD TEST METHOD FOR STEADY-STATE THERMAL TRANSMISSION PROPERTIES BY MEANS OF THE THIN- HEATER APPARATUS
ASTM C1115 : EN-Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM C1116 : EN-Standard Specification for Fiber-Reinforced Concrete and Shotcrete
ASTM C1116/C1116M : EN-Standard Specification for Fiber-Reinforced Concrete
ASTM C1116/C1116M REV A : EN-Standard Specification for Fiber-Reinforced Concrete
ASTM C1117 : EN-Standard Test Method for Time of Setting of Shotcrete Mixtures by Penetration Resistance
ASTM C1118 : EN-Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems
ASTM C1119 : EN-Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1119/C1119M : EN-Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM C1120 : EN-Standard Test Method for Wash Test of Asbestos
ASTM C1121 : EN-Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM C1121/C1121M : EN-Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM C1122 : EN-Standard Test Method for Wet Volume of Asbestos
ASTM C1122/C1122M : EN-Standard Test Method for Wet Volume of Asbestos
ASTM C1123 : EN-Standard Test Method for Compressibility and Recovery of Asbestos
ASTM C1123/C1123M : EN-Standard Test Method for Compressibility and Recovery of Asbestos
ASTM C1124 : EN-Standard Test Method for Kerosene Retention of Asbestos
ASTM C1124/C1124M : EN-Standard Test Method for Kerosene Retention of Asbestos
ASTM C1125 : EN-Standard Test Method for Penetration Index of Asbestos
ASTM C1126 : EN-Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
ASTM C1127 : EN-Standard Guide for Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C1128 : EN-Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM C1129 : EN-Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
ASTM C113 : EN-Standard Test Method for Reheat Change of Refractory Brick
ASTM C1130 : EN-Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM C1131 : EN-Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert Storm Sewer and Sanitary Sewer Systems
ASTM C1132 : EN-STANDARD PRACTICE FOR CALIBRATION OF THE HEAT FLOW METER APPARATUS
ASTM C1133 : EN-Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
ASTM C1133/C1133M : EN-Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
ASTM C1134 : EN-Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
ASTM C1135 : EN-Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1136 : EN-Standard Specification for Flexible Low Permeance Vapor Retarders for Thermal Insulation
ASTM C1136 REV A : EN-Standard Specification for Flexible Low Permeance Vapor Retarders for Thermal Insulation
ASTM C1137 : EN-Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM C1138 : EN-Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM C1138M : EN-Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM C1139 : EN-Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
ASTM C114 : EN-Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114 REV A : EN-Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C114 REV B : EN-Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C1140 : EN-Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C1140 REV A : EN-Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C1141 : EN-Standard Specification for Admixtures for Shotcrete
ASTM C1141/C1141M : EN-Standard Specification for Admixtures for Shotcrete
ASTM C1142 : EN-Standard Specification for Extended Life Mortar for Unit Masonry
ASTM C1143 : EN-Standard Specification for Helium for Use as a Cover Gas for Liquid Sodium
ASTM C1144 : EN-Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms
ASTM C1145 : EN-Standard Terminology of Advanced Ceramics
ASTM C1145 REV A : EN-STANDARD TERMINOLOGY OF ADVANCED CERAMICS
ASTM C1145 REV B : EN-STANDARD TERMINOLOGY OF ADVANCED CERAMICS
ASTM C1145 REV C : EN-STANDARD TERMINOLOGY OF ADVANCED CERAMICS
ASTM C1146 : EN-STANDARD GUIDE FOR PREFABRICATED PANEL INSULATION SYSTEMS FOR DUCTS AND EQUIPMENT OPERATING AT TEMPERATURES ABOVE AMBIENT AIR
ASTM C1147 : EN-Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
ASTM C1148 : EN-STANDARD TEST METHOD FOR MEASURING THE DRYING SHRINKAGE OF MASONRY MORTAR
ASTM C1148 REV A : EN-Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
ASTM C1149 : EN-Standard Specification for Self-Supported Spray Applied Cellulosic Thermal/Acoustical Insulation
ASTM C115 : EN-STANDARD TEST METHOD FOR FINENESS OF PORTLAND CEMENT BY THE TURBIDIMETER
ASTM C115 REV A : EN-Standard Test Method for Fineness of Portland Cement by the Turbidimeter
ASTM C115 REV B : EN-STANDARD TEST METHOD FOR FINENESS OF PORTLAND CEMENT BY THE TURBIDIMETER
ASTM C1150 : EN-STANDARD TEST METHOD FOR THE BREAK-OFF NUMBER OF CONCRETE (E1 – 1992)
ASTM C1151 : EN-Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete
ASTM C1152 : EN-Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM C1152/C1152M : EN-Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM C1153 : EN-Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
ASTM C1154 : EN-STANDARD TERMINOLOGY FOR ASBESTOS AND FIBRE CEMENT
ASTM C1154 REV D : EN-Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
ASTM C1155 : EN-STANDARD PRACTICE FOR DETERMINING THERMAL RESISTANCE OF BUILDING ENVELOPE COMPONENTS FROM IN-SITU DATA (E1-1991)
ASTM C1156 : EN-STANDARD GUIDE FOR ESTABLISHING CALIBRATION FOR A MEASUREMENT METHOD USED TO ANALYZE NUCLEAR FUEL CYCLE MATERIALS
ASTM C1157 : EN-Standard Performance Specification for Hydraulic Cement
ASTM C1157 REV A : EN-Standard Performance Specification for Hydraulic Cement
ASTM C1157/C1157M : EN-Standard Performance Specification for Hydraulic Cement
ASTM C1157M : EN-STANDARD PERFORMANCE SPECIFICATION FOR BLENDED HYDRAULIC CEMENT
ASTM C1157M REV A : EN-Standard Performance Specification for Blended Hydraulic Cement (Metric)
ASTM C1157M REV B : EN-STANDARD PERFORMANCE SPECIFICATION FOR BLENDED HYDRAULIC CEMENT
ASTM C1158 : EN-Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
ASTM C1159 : EN-Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant Rigid Sulfur Concrete
ASTM C116 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE (AASHTO NO. T 140)
ASTM C1160 : EN-Standard Specification for Chemical Resistant Carbon Brick
ASTM C1161 : EN-STANDARD TEST METHOD FOR FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE
ASTM C1161 REV A : EN-Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161 REV B : EN-Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1161 REV C : EN-Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1162 : EN-Standard Test Method for Loose Density of Asbestos
ASTM C1162/C1162M : EN-Standard Test Method for Loose Density of Asbestos
ASTM C1163 : EN-STANDARD TEST METHOD FOR MOUNTING ACTINIDES FOR ALPHA SPECTROMETRY USING NEODYMIUM FLUORIDE
ASTM C1164 : EN-Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
ASTM C1165 : EN-Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode
ASTM C1166 : EN-Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM C1167 : EN-STANDARD SPECIFICATION FOR CLAY ROOF TILES
ASTM C1167 REV A : EN-STANDARD SPECIFICATION FOR CLAY ROOF TILES
ASTM C1167 REV B : EN-STANDARD SPECIFICATION FOR CLAY ROOF TILES
ASTM C1168 : EN-Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
ASTM C1169 : EN-Standard Guide for Laboratory Evaluation of Automatic Pedestrian SNM Monitor Performance
ASTM C117 : EN-Standard Test Method for Materials Finer Than 75-Micrometers (No. 200) Sieve in Mineral Aggregates by Washing
ASTM C1170 : EN-Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1170/C1170M : EN-Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM C1171 : EN-Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM C1172 : EN-Standard Specification for Laminated Architectural Flat Glass
ASTM C1173 : EN-STANDARD SPECIFICATIONS FOR FLEXIBLE TRANSITION COUPLINGS FOR UNDERGROUND PIPING SYSTEMS
ASTM C1173 REV A : EN-STANDARD SPECIFICATIONS FOR FLEXIBLE TRANSITION COUPLINGS FOR UNDERGROUND PIPING SYSTEMS
ASTM C1174 : EN-Standard Practice for Prediction of the Long-Term Behavior of Materials Including Waste Forms Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
ASTM C1175 : EN-STANDARD GUIDE TO TEST METHODS AND STANDARDS FOR NONDESTRUCTIVE TESTING OF ADVANCED CERAMICS
ASTM C1175 REV A : EN-Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
ASTM C1176 : EN-Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM C1176/C1176M : EN-Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM C1177 : EN-Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
ASTM C1177/C1177M : EN-Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
ASTM C1178 : EN-Standard Specification for Glass Mat Water- Resistant Gypsum Backing Board
ASTM C1178/C1178M : EN-Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel
ASTM C1179 : EN-Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C118 : EN-Standard Specification for Concrete Pipe for Irrigation or Drainage
ASTM C118 REV A : EN-Standard Specification for Concrete Pipe for Irrigation or Drainage
ASTM C1180 : EN-Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C1180 REV A : EN-Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C1181 : EN-Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
ASTM C1182 : EN-Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1183 : EN-Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM C1184 : EN-Standard Specification for Structural Silicone Sealants
ASTM C1184 REV A : EN-Standard Specification for Structural Silicone Sealants
ASTM C1185 : EN-STANDARD TEST METHODS FOR SAMPLING AND TESTING NON-ASBESTOS FIBER- CEMENT FLAT SHEET ROOFING AND SIDING SHINGLES AND CLAPBOARDS
ASTM C1185 REV A : EN-STANDARD TEST METHODS FOR SAMPLING AND TESTING NON-ASBESTOS FIBER-CEMENT FLAT SHEET ROOFING AND SIDING SHINGLES AND CLAPBOARDS
ASTM C1186 : EN-Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
ASTM C1186 REV A : EN-Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
ASTM C1187 : EN-Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
ASTM C1188 : EN-Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities
ASTM C1189 : EN-Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
ASTM C118M : EN-STANDARD SPECIFICATION FOR CONCRETE PIPE FOR IRRIGATION OR DRAINAGE (METRIC)
ASTM C118M REV A : EN-Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
ASTM C119 : EN-STANDARD TERMINOLOGY RELATING TO DIMENSION STONE
ASTM C119 REV A : EN-STANDARD TERMINOLOGY RELATING TO DIMENSION STONE
ASTM C119 REV B : EN-Standard Terminology Relating to Dimension Stone
ASTM C119 REV C : EN-Standard Terminology Relating to Dimension Stone
ASTM C119 REV D : EN-STANDARD TERMINOLOGY RELATING TO DIMENSION STONE
ASTM C1190 : EN-Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
ASTM C1191 : EN-Standard Practice for Safe Use and Handling of Ceramic Clays and Slips
ASTM C1192 : EN-Standard Practice for Safe Spraying of Ceramic Glazes
ASTM C1193 : EN-Standard Guide for Use of Joint Sealants
ASTM C1193 REV A : EN-Standard Guide for Use of Joint Sealants
ASTM C1194 : EN-Standard Test Method for Compressive Strength of Architectural Cast Stone
ASTM C1195 : EN-Standard Test Method for Absorption of Architectural Cast Stone
ASTM C1196 : EN-Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
ASTM C1197 : EN-Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
ASTM C1198 : EN-Standard Test Method for Dynamic Young´s Modulus Shear Modulus and Poisson´s Ratio for Advanced Ceramics by Sonic Resonance
ASTM C1199 : EN-Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
ASTM C12 : EN-Standard Practice for Installing Vitrified Clay Pipe Lines
ASTM C120 : EN-Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture Modulus of Elasticity)
ASTM C120/C120M : EN-Standard Test Methods of Flexure Testing of Slate (Breaking Load Modulus of Rupture Modulus of Elasticity)
ASTM C1201 : EN-Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
ASTM C1201/C1201M : EN-Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
ASTM C1202 : EN-Standard Test Method for Electrical Indication of Concrete-s Ability to Resist Chloride Ion Penetration
ASTM C1203 : EN-Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM C1204 : EN-Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration
ASTM C1205 : EN-Standard Test Method for the Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry
ASTM C1206 : EN-Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration
ASTM C1207 : EN-Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
ASTM C1208 : EN-Standard Specification for Vitrified Clay Pipe and Joints for Use in Jacking Sliplining and Tunnels
ASTM C1208/C1208M : EN-Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling Sliplining Pipe Bursting and Tunnels
ASTM C1208/C1208M REV A : EN-Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling Sliplining Pipe Bursting and Tunnels
ASTM C1208M : EN-STANDARD SPECIFICATION FOR VITRIFIED CLAY PIPE AND JOINTS FOR USE IN JACKING SLIPLINING AND IN TUNNELS (METRIC)
ASTM C1209 : EN-Standard Terminology of Concrete Masonry Units and Related Units
ASTM C1209 REV A : EN-Standard Terminology of Concrete Masonry Units and Related Units
ASTM C121 : EN-Standard Test Method for Water Absorption of Slate
ASTM C121/C121M : EN-Standard Test Method for Water Absorption of Slate
ASTM C1210 : EN-Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories within the Nuclear Industry
ASTM C1211 : EN-Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
ASTM C1211 REV A : EN-Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
ASTM C1212 : EN-Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
ASTM C1213 : EN-Standard Terminology Relating to Precast Concrete Products
ASTM C1214 : EN-Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM C1214M : EN-Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM C1215 : EN-Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C1216 : EN-Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C1217 : EN-Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
ASTM C1218 : EN-Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C1218/C1218M : EN-Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C1219 : EN-Standard Test Methods for Arsenic in Uranium Hexafluoride
ASTM C122 : EN-STANDARD METHOD OF PANEL SPALLING TESTING SUPER- DUTY FIRECLAY BRICK (R 1984)
ASTM C1220 : EN-Standard Test Method for Static Leaching of Monolithic Waste Forms for Disposal of Radioactive Waste
ASTM C1221 : EN-Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM C1222 : EN-Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222 REV A : EN-STANDARD PRACTICE FOR EVALUATION OF LABORATORIES TESTING HYDRAULIC CEMENT
ASTM C1222 REV B : EN-STANDARD PRACTICE FOR EVALUATION OF LABORATORIES TESTING HYDRAULIC CEMENT
ASTM C1223 : EN-Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
ASTM C1224 : EN-Standard Specification for Reflective Insulation for Building Applications
ASTM C1225 : EN-Standard Specification for Non-Asbestos Fiber- Cement Roofing Shingles Shakes and Slates
ASTM C1226 : EN-Standard Test Method for Soluble Chlorides in Asbestos
ASTM C1227 : EN-Standard Specification for Precast Concrete Septic Tanks
ASTM C1227 REV A : EN-STANDARD SPECIFICATION FOR PRECAST CONCRETE SEPTIC TANKS
ASTM C1227 REV B : EN-Standard Specification for Precast Concrete Septic Tanks
ASTM C1227 REV C : EN-Standard Specification for Precast Concrete Septic Tanks
ASTM C1228 : EN-Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
ASTM C1229 : EN-STANDARD TEST METHOD FOR DETERMINATION OF GLASS- FIBER CONTENT IN GLASS FIBER REINFORCED CONCRETE (GFRC) (WASH- OUT TEST)
ASTM C123 : EN-STANDARD TEST METHOD FOR LIGHTWEIGHT PIECES IN AGGREGATE (AASHTO NO. T113) (R-1990) (E1-1990)
ASTM C1230 : EN-Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C1230 REV A : EN-STANDARD TEST METHOD FOR PERFORMING TENSION TESTS ON GLASS-FIBER REINFORCED CONCRETE (GFRC) BONDING PADS
ASTM C1231 : EN-Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M : EN-Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1231/C1231M REV A : EN-Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
ASTM C1232 : EN-Standard Terminology of Masonry
ASTM C1232 REV A : EN-Standard Terminology of Masonry
ASTM C1232 REV B : EN-Standard Terminology of Masonry
ASTM C1233 : EN-Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
ASTM C1234 : EN-Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure High-Temperature Digestion for Trace Element Determinations
ASTM C1235 : EN-STANDARD TEST METHOD FOR PLUTONIUM BY TITANIUM (III)/CERIUM(IV) TITRATION
ASTM C1235 REV A : EN-Standard Test Method for Plutonium by Titanium(III)/Cerium(IV) Titration
ASTM C1236 : EN-Standard Guide for In-Plant Performance Evaluation of Automatic Vehicle SNM Monitors
ASTM C1237 : EN-Standard Guide to In-Plant Performance Evaluation of Hand-Held SNM Monitors
ASTM C1238 : EN-Standard Guide for Installation of Walk- Through Metal Detectors
ASTM C1239 : EN-Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
ASTM C1239 REV A : EN-Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
ASTM C1240 : EN-Standard Specification for Use of Silica Fume as a Mineral Admixture in Hydraulic- Cement Concrete Mortar and Grout
ASTM C1240 REV A : EN-Standard Specification for Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete Mortar and Grout
ASTM C1240 REV B : EN-Standard Specification for Silica Fume for Use as a Mineral Admixture in Hydraulic-Cement Concrete Mortar and Grout
ASTM C1241 : EN-Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C1242 : EN-Standard Guide for Selection Design and Installation of Dimension Stone Anchoring Systems
ASTM C1242 REV A : EN-Standard Guide for Selection Design and Installation of Dimension Stone Anchoring Systems
ASTM C1242 REV B : EN-Standard Guide for Design Selection and Installation of Exterior Dimension Stone Anchors and Anchoring Systems
ASTM C1243 : EN-Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
ASTM C1244 : EN-Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
ASTM C1244 REV A : EN-Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
ASTM C1244M : EN-Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
ASTM C1244M REV A : EN-Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
ASTM C1245 : EN-Standard Test Method for Determining Bond Strength between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures Point Load Test
ASTM C1245/C1245M : EN-Standard Test Method for Determining Bond Strength between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test)
ASTM C1246 : EN-Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants After Cure
ASTM C1247 : EN-Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C1248 : EN-Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C1249 : EN-Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C1249 REV A : EN-Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C125 : EN-Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C125 REV A : EN-Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C1250 : EN-Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
ASTM C1251 : EN-Standard Guide for Determination of Specific Surface Area of Advanced Ceramic Materials by Gas Adsorption
ASTM C1252 : EN-Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape Surface Texture and Grading
ASTM C1253 : EN-Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM C1254 : EN-Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence
ASTM C1255 : EN-Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1256 : EN-Standard Practice for Interpreting Glass Fracture Surface Features
ASTM C1257 : EN-Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C1257 REV A : EN-Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C1258 : EN-Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
ASTM C1259 : EN-STANDARD TEST METHOD FOR DYNAMIC YOUNG´S MODULUS SHEAR MODULUS AND POISSON´S RATIO FOR ADVANCED CERAMICS BY IMPULSE EXCITATION OF VIBRATION
ASTM C126 : EN-STANDARD SPECIFICATION FOR CERAMIC GLAZED STRUCTURAL CLAY FACING TILE FACING BRICK AND SOLID MASONRY UNITS
ASTM C1260 : EN-Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM C1260 REV A : EN-Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM C1261 : EN-STANDARD SPECIFICATION FOR FIREBOX BRICK FOR RESIDENTIAL FIREPLACES
ASTM C1262 : EN-Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
ASTM C1262 REV A : EN-Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
ASTM C1263 : EN-Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
ASTM C1264 : EN-Standard Specification for Sampling Inspection Rejection Certification Packaging Marking Shipping Handling and Storage of Gypsum Board
ASTM C1264/C1264M : EN-Standard Specification for Sampling Inspection Rejection Certification Packaging Marking Shipping Handling and Storage of Gypsum Board
ASTM C1265 : EN-Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C1266 : EN-STANDARD TEST METHOD FOR FLOW CHARACTERISTICS OF PREFORMED TAPE SEALANTS
ASTM C1267 : EN-Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
ASTM C1268 : EN-Standard Test Method for Quantitative Determination of American 241 in Plutonium by Gamma-Ray Spectrometry
ASTM C1269 : EN-Standard Practice for Adjusting the Operational Sensitivity Setting of in-Plant Walk-Through Metal Detectors
ASTM C127 : EN-Standard Test Method for Specific Gravity and Absorption of Coarse Aggregate-AASHTO T85; E1-1993
ASTM C1270 : EN-Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through Metal Detectors
ASTM C1271 : EN-Standard Test Method for X-Ray Spectrometric Analysis of Lime and Limestone
ASTM C1271 REV A : EN-Standard Test Method for X-Ray Spectrometric Analysis of Lime and Limestone
ASTM C1272 : EN-Standard Specification for Heavy Vehicular Paving Brick
ASTM C1272 REV A : EN-Standard Specification for Heavy Vehicular Paving Brick
ASTM C1273 : EN-STANDARD PRACTICE FOR TENSILE STRENGTH OF MONOLITHIC ADVANCED CERAMICS AT AMBIENT TEMPERATURES
ASTM C1273 REV A : EN-Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM C1274 : EN-Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM C1275 : EN-Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM C1276 : EN-Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscometer
ASTM C1277 : EN-Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM C1277 REV A : EN-Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM C1278 : EN-STANDARD SPECIFICATION FOR FIBER-REINFORCED GYPSUM PANELS
ASTM C1278/C1278M : EN-Standard Specification for Fiber-Reinforced Gypsum Panel
ASTM C1278/C1278M REV A : EN-Standard Specification for Fiber-Reinforced Gypsum Panel
ASTM C1279 : EN-Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed Heat-Strengthened and Fully Tempered Flat Glass
ASTM C128 : EN-Standard Test Method for Density Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM C128 REV A : EN-Standard Test Method for Density Relative Density (Specific Gravity) and Absorption of Fine Aggregate
ASTM C1280 : EN-Standard Specification for Application of Gypsum Sheathing Board
ASTM C1281 : EN-Standard Specification for Preformed Tape Sealants for Glazing Applications
ASTM C1282 : EN-Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1283 : EN-Standard Practice for Installing Clay Flue Lining
ASTM C1283 REV A : EN-Standard Practice for Installing Clay Flue Lining
ASTM C1284 : EN-Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
ASTM C1285 : EN-Standard Test Methods for Determining Chemical Durability of Nuclear Waste Glasses: the Product Consistency Test (PCT)
ASTM C1286 : EN-Standard Classification for Advanced Ceramics
ASTM C1287 : EN-STANDARD TEST METHOD FOR DETERMINATION OF IMPURITIES IN URANIUM DIOXIDE BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY
ASTM C1288 : EN-Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
ASTM C1289 : EN-Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
ASTM C1289 REV A : EN-Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
ASTM C129 : EN-Standard Specification for Nonloadbearing Concrete Masonry Units
ASTM C129 REV A : EN-STANDARD SPECIFICATION FOR NONLOADBEARING CONCRETE MASONRY UNITS
ASTM C1290 : EN-Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts-E1
ASTM C1291 : EN-Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time-To-Failure for Advanced Monolithic Ceramics
ASTM C1291 REV A : EN-Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time-To-Failure for Advanced Monolithic Ceramics
ASTM C1292 : EN-STANDARD TEST METHODS FOR SHEAR STRENGTH OF CONTINUOUS FIBER-REINFORCED ADVANCED CERAMICS AT AMBIENT TEMPERATURES
ASTM C1292 REV A : EN-Standard Test Methods for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1293 : EN-Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C1293 REV A : EN-Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C1293 REV B : EN-Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C1294 : EN-Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C1295 : EN-Standard Test Method for Gamma Energy Emission from Fission Products in Uranium Hexafluoride
ASTM C1296 : EN-Standard Test Method for Determination of Sulfur in Uranium Oxides and Uranyl Nitrate Solutions by X-Ray Fluorescence (XRF)
ASTM C1297 : EN-Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C1298 : EN-Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys
ASTM C1299 : EN-Standard Guide for Use in Selection of Liquid-Applied Sealants
ASTM C1300 : EN-Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
ASTM C1301 : EN-Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM C1302 : EN-Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
ASTM C1303 : EN-Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303 REV A : EN-Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1303/C1303M : EN-Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1304 : EN-Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM C1305 : EN-Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
ASTM C1306 : EN-Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
ASTM C1306 REV A : EN-Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
ASTM C1307 : EN-Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry
ASTM C1308 : EN-Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive Fractional Leaching from Cylindrical Waste Forms
ASTM C1309 : EN-Standard Practice for Performance Evaluation of In-Plant Walk-Through Metal Detectors
ASTM C131 : EN-Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C1310 : EN-Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration
ASTM C1311 : EN-Standard Specification for Solvent Release Sealants
ASTM C1312 : EN-Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
ASTM C1313 : EN-Standard Specification for Sheet Radiant Barriers for Building Construction Applications
ASTM C1313/C1313M : EN-Standard Specification for Sheet Radiant Barriers for Building Construction Applications
ASTM C1314 : EN-Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314 REV A : EN-Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1314 REV B : EN-Standard Test Method for Compressive Strength of Masonry Prisms
ASTM C1315 : EN-Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
ASTM C1316 : EN-Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using a 252Cf Shuffler
ASTM C1317 : EN-Standard Practice for Dissolution of Silicate or Acid-Resistant Matrix Samples
ASTM C1318 : EN-Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
ASTM C1319 : EN-Standard Specification for Concrete Grid Paving Units
ASTM C1320 : EN-Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
ASTM C1321 : EN-Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
ASTM C1322 : EN-Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
ASTM C1322 REV A : EN-Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
ASTM C1322 REV B : EN-Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
ASTM C1323 : EN-Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM C1324 : EN-Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
ASTM C1324 REV A : EN-Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
ASTM C1325 : EN-Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Interior Substrate Sheets
ASTM C1325 REV A : EN-Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
ASTM C1325 REV B : EN-Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
ASTM C1326 : EN-Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1326 REV A : EN-Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327 : EN-Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1327 REV A : EN-Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1328 : EN-Standard Specification for Plastic (Stucco) Cement
ASTM C1328 REV A : EN-Standard Specification for Plastic (Stucco) Cement
ASTM C1329 : EN-Standard Specification for Mortar Cement
ASTM C1329 REV A : EN-Standard Specification for Mortar Cement
ASTM C133 : EN-Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
ASTM C1330 : EN-Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
ASTM C1331 : EN-Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
ASTM C1332 : EN-Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
ASTM C1334 : EN-Standard Specification for Uranium Oxides with a 235 U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
ASTM C1335 : EN-Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM C1336 : EN-Standard Practice for Fabrication Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
ASTM C1337 : EN-Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
ASTM C1338 : EN-Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM C1339 : EN-Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
ASTM C1339 REV A : EN-Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
ASTM C134 : EN-STANDARD TEST METHODS FOR SIZE DIMENSIONAL MEASUREMENTS AND BULK DENSITY OF REFRACTORY BRICK AND INSULATING FIREBRICK
ASTM C1340 : EN-Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
ASTM C1340/C1340M : EN-Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
ASTM C1341 : EN-Standard Test Method for Flexural Properties of Continuous Fiber- Reinforced Advanced Ceramic Composites
ASTM C1342 : EN-Standard Practice for Flux Fusion Sample Dissolution
ASTM C1343 : EN-Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
ASTM C1344 : EN-Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
ASTM C1345 : EN-Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry
ASTM C1346 : EN-Standard Practice for Dissolution of UF6 from P-10 Tubes
ASTM C1347 : EN-Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
ASTM C1347 REV A : EN-Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
ASTM C1348 : EN-Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5 % for Direct Hydrogen Reduction to Nuclear Grade Uranium Dioxide
ASTM C1349 : EN-Standard Specification for Architectural Flat Glass Clad Polycarbonate
ASTM C135 : EN-Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C1350M : EN-Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
ASTM C1351M : EN-Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM C1352 : EN-Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1352/C1352M : EN-Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1353 : EN-Standard Test Method for Abrasion Resistance of Dimension Stone by the Taber Abraser
ASTM C1354 : EN-Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM C1354/C1354M : EN-Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM C1355/C1355M : EN-Standard Specification for Glass Fiber Reinforced Gypsum Compsites
ASTM C1356 : EN-Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM C1356M : EN-Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure (Metric)
ASTM C1357 : EN-Standard Test Methods for Evaluating Masonry Bond Strength
ASTM C1357 REV A : EN-Standard Test Methods for Evaluating Masonry Bond Strength
ASTM C1358 : EN-Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
ASTM C1359 : EN-Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Elevated Temperatures
ASTM C136 : EN-Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM C136 REV A : EN-STANDARD METHOD FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES
ASTM C1360 : EN-Standard Practice for Constant-Amplitude Axial Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1361 : EN-Standard Practice for Constant-Amplitude Axial Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM C1362 : EN-Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
ASTM C1363 : EN-Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
ASTM C1364 : EN-Standard Specification for Architectural Cast Stone
ASTM C1365 : EN-Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM C1366 : EN-Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM C1367 : EN-Standard Test Method for Heat Resistance of Hot-Applied Sealants under Dead Load Shear
ASTM C1368 : EN-Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
ASTM C1369 : EN-Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM C1370 : EN-Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
ASTM C1371 : EN-Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C1371 REV A : EN-Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C1372 : EN-Standard Specification for Dry-Cast Segmental Retaining Wall Units
ASTM C1372 REV A : EN-Standard Specification for Segmental Retaining Wall Units
ASTM C1373 : EN-Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems under Simulated Winter Conditions
ASTM C1374 : EN-Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM C1375 : EN-Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C1376 : EN-Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass
ASTM C1377 : EN-Standard Test Method for Calibration of Surface/Stress Measuring Devices
ASTM C1378 : EN-Standard Test Method for Determination of Resistance to Staining
ASTM C1379 : EN-Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
ASTM C138 : EN-STANDARD TEST METHOD FOR UNIT WEIGHT YIELD AND AIR CONTENT (GRAVIMETRIC) OF CONCRETE (AASHTO NO. T121) (E1-1983)
ASTM C138/C138M : EN-Standard Test Method for Density (Unit Weight) Yield and Air Content (Gravimetric) of Concrete
ASTM C138/C138M REV A : EN-Standard Test Method for Density (Unit Weight) Yield and Air Content (Gravimetric) of Concrete-AASHTO No.: T121
ASTM C1380 : EN-Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
ASTM C1381 : EN-Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
ASTM C1381/C1381M : EN-Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
ASTM C1382 : EN-Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C1383 : EN-Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
ASTM C1383 REV A : EN-Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
ASTM C1384 : EN-Standard Specification for Admixtures for Masonry Mortars
ASTM C1384 REV A : EN-Standard Specification for Admixtures for Masonry Mortars
ASTM C1385 : EN-Standard Practice for Sampling Materials for Shotcrete
ASTM C1385/C1385M : EN-Standard Practice for Sampling Materials for Shotcrete
ASTM C1386 : EN-Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
ASTM C1387 : EN-Standard Guide for the Determination of Technetium-99 in Soil
ASTM C1388 : EN-Standard Test Method for Compressive Strength of Laboratory Constructed Masonry Prisms
ASTM C1389 : EN-Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM C139 : EN-Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
ASTM C139 REV A : EN-STANDARD SPECIFICATION FOR CONCRETE MASONRY UNITS FOR CONSTRUCTION OF CATCH BASINS AND MANHOLES
ASTM C1390 : EN-Standard Test Methods for Flexural Bond Strength of Masonry
ASTM C1391 : EN-Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM C1392 : EN-Standard Guide for Evaluating Failure of Structural Sealant Glazing
ASTM C1393 : EN-Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
ASTM C1393 REV A : EN-Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
ASTM C1394 : EN-Standard Guide for In-Situ Structural Silicone Glazing Evaluation
ASTM C1395/C1395M : EN-Specification for Gypsum Ceiling Board
ASTM C1396/C1396M : EN-Standard Specification for Gypsum Board
ASTM C1396/C1396M REV A : EN-Standard Specification for Gypsum Board
ASTM C1397 : EN-Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
ASTM C1398 : EN-Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles
ASTM C1399 : EN-Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399 REV A : EN-Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C1399/C1399M : EN-Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C14 : EN-Standard Specification for Nonreinforced Concrete Sewer Storm Drain and Culvert Pipe
ASTM C14 REV A : EN-Standard Specification for Nonreinforced Concrete Sewer Storm Drain and Culvert Pipe
ASTM C140 : EN-Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C140 REV A : EN-Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C140 REV B : EN-Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C1400 : EN-Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
ASTM C1401 : EN-Standard Guide for Structural Sealant Glazing
ASTM C1401 REV A : EN-Standard Guide for Structural Sealant Glazing
ASTM C1402 : EN-Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
ASTM C1403 : EN-Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C1403 REV A : EN-Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C1404/C1404M : EN-Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
ASTM C1405 : EN-Standard Specification for Glazed Brick (Single Fired Brick Units)
ASTM C1405 REV A : EN-Standard Specification for Glazed Brick (Single Fired Brick Units)
ASTM C1405 REV B : EN-Standard Specification for Glazed Brick (Single Fired Solid Brick Units)
ASTM C1407 : EN-Standard Practice for Calculating Areas Volume and Linear Change of Refractory Shapes
ASTM C1408 : EN-Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets by Direct Combustion-Infrared Detection Method
ASTM C1409 : EN-Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
ASTM C141 : EN-Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
ASTM C141/C141M : EN-Standard Specification for Hydrated Hydraulic Lime for Structural Purposes
ASTM C1410 : EN-Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
ASTM C1410 REV A : EN-Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
ASTM C1411 : EN-Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis
ASTM C1412 : EN-Standard Practice for Microwave Oven Dissolution of Glass Containing Radioactive and Mixed Wastes
ASTM C1413 : EN-Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
ASTM C1414 : EN-Standard Practice for the Separation of Americium from Plutonium by Ion Exchange
ASTM C1415 : EN-Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry
ASTM C1415 REV A : EN-Standard Test Method for 238Pu Isotopic Abundance by Alpha Spectrometry
ASTM C1416 : EN-Standard Test Method for Uranium Analysis Waste Water by X-ray Fluorescence
ASTM C1417 : EN-Standard Specification for Manufacture of Reinforced Concrete Sewer Storm Drain and Culvert Pipe for Direct Design
ASTM C1417M : EN-Standard Specification for Manufacture of Reinforced Concrete Sewer Storm Drain and Culvert Pipe for Direct Design [Metric]
ASTM C1419 : EN-Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young´s Modulus
ASTM C1419 REV A : EN-Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young-s Modulus
ASTM C142 : EN-Standard Test Method for Clay Lumps and Friable Particles in Aggregates-AASHTO No.: T112
ASTM C1420 : EN-Standard Practice for Selection Removal and Shipment of Manufactured Masonry Units Placed in Usage
ASTM C1420 REV A : EN-Standard Guide for Selection Removal and Shipment of Manufactured Masonry Units Placed in Usage
ASTM C1421 : EN-Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421 REV A : EN-Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421 REV B : EN-Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1422 : EN-Standard Specification for Chemically Strengthened Flat Glass
ASTM C1423 : EN-Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM C1424 : EN-Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C1425 : EN-Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
ASTM C1426 : EN-Standard Practices for Verification and Calibration of Polarimeters
ASTM C1427 : EN-Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in heet and Tubular Form
ASTM C1427 REV A : EN-Specification for Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
ASTM C1428 : EN-Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM C1429 : EN-Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C143 : EN-STANDARD TEST METHOD FOR SLUMP OF PORTLAND CEMENT CONCRETE (E1-1985)
ASTM C143 REV A : EN-Standard Test Method for Slump of Hydraulic Cement Concrete-AASHTO T119
ASTM C143/C143M : EN-Standard Test Method for Slump of Hydraulic-Cement Concrete
ASTM C143/C143M REV A : EN-Standard Test Method for Slump of Hydraulic-Cement Concrete
ASTM C1430 : EN-Standard Test Method for Determination of Uranium Oxygen to Uranium (O/U) and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
ASTM C1431 : EN-Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
ASTM C1432 : EN-Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution Ion Exchange Matrix Separation and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
ASTM C1433 : EN-Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts Storm Drains and Sewers
ASTM C1433 REV A : EN-Standard Specification for Precast Reinforced Concrete Box Sections for Culverts Storm Drains and Sewers
ASTM C1433M : EN-Standard Specification for Precast Reinforced Concrete Box Sections for Culverts Storm Drains and Sewers (Metric)
ASTM C1433M REV A : EN-Standard Specification for Precast Reinforced Concrete Box Sections for Culverts Storm Drains and Sewers (Metric)
ASTM C1435 : EN-Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
ASTM C1435/C1435M : EN-Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
ASTM C1436 : EN-Standard Specification for Materials for Shotcrete
ASTM C1437 : EN-Standard Test Method for Flow of Hydraulic Cement Mortar
ASTM C1438 : EN-Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar
ASTM C1439 : EN-Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete
ASTM C1439 REV A : EN-Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete
ASTM C144 : EN-Standard Specification for Aggregate for Masonry Mortar-AASHTO No.: M45-70(1974)
ASTM C1440 : EN-Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain Waste and Vent (DWV) Sewer Sanitary and Storm Plumbing Systems
ASTM C1441 : EN-Standard Test Method for the Analysis of Refrigerant 114 Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride Via Fourier-Transform Infrared (FTIR) Spectroscopy
ASTM C1442 : EN-Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C1443 : EN-Standard Specification for Glasses Portlight Circular Fully Tempered
ASTM C1444 : EN-Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
ASTM C1445 : EN-Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
ASTM C1446 : EN-Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
ASTM C1447 : EN-Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM C1447/C1447M : EN-Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM C1448 : EN-Standard Specification for Non-Asbestos Fiber-Cement Conduit
ASTM C1448/C1448M : EN-Standard Specification for Non-Asbestos Fiber-Cement Conduit
ASTM C1449 : EN-Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
ASTM C1449/C1449M : EN-Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
ASTM C1449/C1449M REV A : EN-Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
ASTM C145 : EN-STANDARD SPECIFICATION FOR SOLID LOAD-BEARING CONCRETE MASONRY UNITS (DISCONTINUED)
ASTM C1450 : EN-Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
ASTM C1450/C1450M : EN-Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
ASTM C1450/C1450M REV A : EN-Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
ASTM C1451 : EN-Standard Practice for Determining Uniformity of Ingredients of Concrete from a Single Source
ASTM C1452 : EN-Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
ASTM C1453 : EN-Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
ASTM C1454 : EN-Standard Guide for Pyrophoricity/Combustibility Testing in Support of Pyrophoricity Analyses of Metallic Uranium Spent Nuclear Fuel
ASTM C1455 : EN-Standard Guide for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
ASTM C1456 : EN-Standard Test Method for the Determination of Uranium or Gadolinium or Both in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)
ASTM C1457 : EN-Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
ASTM C1458 : EN-Standard Test Method for Nondestructive Assay of Plutonium Tritium and 241 Am by Calorimetric Assay
ASTM C1459 : EN-Standard Specification of Non-Asbestos Fiber-Reinforced Cement Shake Shingle and Slate Roofing Systems
ASTM C146 : EN-Standard Test Methods for Chemical Analysis of Glass Sand
ASTM C146 REV A : EN-Standard Test Methods for Chemical Analysis of Glass Sand
ASTM C1460 : EN-Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
ASTM C1461 : EN-Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain Waste and Vent (DWV) Sewer Sanitary and Storm Plumbing Systems for Above and Below Ground Use
ASTM C1462 : EN-Standard Specification for Uranium Metal Enriched to More Than 15 % and Less Than 20 % 235U
ASTM C1463 : EN-Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis
ASTM C1464 : EN-Standard Specification for Bent Glass
ASTM C1465 : EN-Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM C1466 : EN-Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware
ASTM C1467/C1467M : EN-Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
ASTM C1468 : EN-Standard Test Method for Transthickness Tensile Strength of Continous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM C1469 : EN-Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM C147 : EN-Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C1470 : EN-Standard Guide for Testing the Thermal Properties of Advanced Ceramics
ASTM C1471 : EN-Standard Guide for the Use of High Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1472 : EN-Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C1473 : EN-Standard test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
ASTM C1474 : EN-Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
ASTM C1475 : EN-Standard Guide for Determination of Neptunium-237 in Soil
ASTM C1476 : EN-Standard Test Method for Analysis of Urine for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
ASTM C1477 : EN-Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector Inductively Coupled Plasma-Mass Spectrometry1
ASTM C1478 : EN-Standard Specification for Storm Drain Resilient Connectors between Reinforced Concrete Storm Sewer Structures Pipes and Laterals
ASTM C1478M : EN-Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures Pipes and Laterals [Metric]
ASTM C1478M REV A : EN-Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures Pipes and Laterals (Metric)
ASTM C1479 : EN-Standard Practice for Installation of Precast Concrete Sewer Storm Drain and Culvert Pipe Using Standard Installations
ASTM C1479 REV A : EN-Standard Practice for Installation of Precast Concrete Sewer Storm Drain and Culvert Pipe Using Standard Installations
ASTM C1479M : EN-Standard Practice for Installation of Precast Concrete Sewer Storm Drain and Culvert Pipe Using Standard Installations [Metric]
ASTM C1479M REV A : EN-Standard Practice for Installation of Precast Concrete Sewer Storm Drain and Culvert Pipe Using Standard Installations [Metric]
ASTM C148 : EN-STANDARD TEST METHODS FOR POLARISCOPIC EXAMINATION OF GLASS CONTAINERS
ASTM C1480 : EN-Standard Specification for Packaged Pre-Blended Dry Combined Materials for Use in Wet or Dry Shotcrete Application
ASTM C1480/C1480M : EN-Standard Specification for Packaged Pre-Blended Dry Combined Materials for Use in Wet or Dry Shotcrete Application
ASTM C1481 : EN-Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems(EIFS)
ASTM C1482 : EN-Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
ASTM C1483 : EN-Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
ASTM C1483/C1483M : EN-Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
ASTM C1484 : EN-Standard Specification for Vacuum Insulation Panels
ASTM C1485 : EN-Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
ASTM C1486 : EN-Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
ASTM C1487 : EN-Standard Guide for Remedying Strucutral Silicone Glazing
ASTM C1488 : EN-Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
ASTM C1489 : EN-Standard Specification for Lime Putty for Structural Purposes
ASTM C149 : EN-Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C1490 : EN-Standard Guide for the Selection Training and Qualification of Nondestructive Assay (NDA) Personnel
ASTM C1491 : EN-Standard Specification for Concrete Roof Pavers
ASTM C1491 REV A : EN-Standard Specification for Concrete Roof Pavers
ASTM C1492 : EN-Standard Specification for Concrete Roof Tile
ASTM C1493 : EN-Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
ASTM C1494 : EN-Standard Test Methods for Determination of Mass Fraction of Carbon Nitrogen and Oxygen in Silicon Nitride Power
ASTM C1495 : EN-Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C1496 : EN-Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
ASTM C1497 : EN-Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM C1498 : EN-Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
ASTM C1498 REV A : EN-Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
ASTM C1499 : EN-Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C14M : EN-STANDARD SPECIFICATION FOR CONCRETE SEWER STORM DRAIN AND CULVERT PIPE (METRIC) (AASHTO M86M)
ASTM C14M REV A : EN-Standard Specification for Nonreinforced Concrete Sewer Storm Drain and Culvert Pipe [Metric]
ASTM C150 : EN-Standard Specification for Portland Cement
ASTM C150 REV A : EN-Standard Specification for Portland Cement
ASTM C150 REV B : EN-STANDARD SPECIFICATION FOR PORTLAND CEMENT
ASTM C150/C150M : EN-Standard Specification for Portland Cement
ASTM C1500 : EN-Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting
ASTM C1501 : EN-Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1502 : EN-Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide
ASTM C1503 : EN-Standard Specification for Silvered Flat Glass Mirror
ASTM C1504 : EN-Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
ASTM C1504M : EN-Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
ASTM C1505 : EN-Standard Test Method For Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C1506 : EN-Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C1507 : EN-Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
ASTM C1508 : EN-Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
ASTM C1509 : EN-Standard Specification for Beaded Process Glass Pipe and Fittings
ASTM C151 : EN-STANDARD TEST METHOD FOR AUTOCLAVE EXPANSION OF PORTLAND CEMENT
ASTM C151 REV A : EN-Standard Test Method for Autoclave Expansion of Portland Cement
ASTM C151/C151M : EN-Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C1510 : EN-Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM C1511 : EN-Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
ASTM C1512 : EN-Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM C1513 : EN-Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
ASTM C1514 : EN-Standard Test Method for Measurement of 235U Fraction Using the Enrichment Meter Principle
ASTM C1515 : EN-Standard Guide for Cleaning of Exterior Dimension Stone Vertical And Horizontal Surfaces New or Existing
ASTM C1516 : EN-Standard Practice for Application of Direct-Applied Exterior Finish Systems
ASTM C1517 : EN-Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
ASTM C1518 : EN-Standard Specification for Precured Elastomeric Silicone Joint Sealants
ASTM C1519 : EN-Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519 REV A : EN-Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1520 : EN-Standard Guide for Paintability of Latex Sealants
ASTM C1521 : EN-Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C1521 REV A : EN-Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM C1522 : EN-Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
ASTM C1523 : EN-Standard Test Method for Determining Modulus Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C1523 REV A : EN-Standard Test Method for Determining Modulus Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C1524 : EN-Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
ASTM C1524 REV A : EN-Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
ASTM C1525 : EN-Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
ASTM C1526 : EN-Standard Specification for Serpentine Dimension Stone
ASTM C1527 : EN-Standard Specification for Travertine Dimension Stone
ASTM C1528 : EN-Standard Guide for Selection of Dimension Stone for Exterior Use
ASTM C1528 REV A : EN-Standard Guide for Selection of Dimension Stone for Exterior Use
ASTM C1529 : EN-Standard Specification for Quicklime Hydrated Lime and Limestone for Environmental Uses
ASTM C1529 REV A : EN-Standard Specification for Quicklime Hydrated Lime and Limestone for Environmental Uses
ASTM C1530 : EN-Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes Shingles and Slates with Designed Varying Profiles and Thicknesses
ASTM C1530/C1530M : EN-Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes Shingles and Slates with Designed Varying Profiles and Thicknesses
ASTM C1531 : EN-Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
ASTM C1532 : EN-Standard Guide for Selection Removal and Shipment of Masonry Assemblage Specimens from Existing Construction
ASTM C1532 REV A : EN-Standard Guide for Selection Removal and Shipment of Masonry Assemblage Specimens from Existing Construction
ASTM C1533 : EN-Standard Guide for General Design Considerations for Hot Cell Equipment
ASTM C1534 : EN-Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
ASTM C1535 : EN-Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
ASTM C1536 : EN-Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C1539 : EN-Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting
ASTM C154 : EN-STANDARD TEST METHOD FOR WARPAGE OF REFRACTORY BRICK AND TILE OR DEVIATION FROM A PLANE SURFACE
ASTM C1540 : EN-Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM C1540 REV A : EN-Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM C1541 : EN-Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
ASTM C1542/C1542M : EN-Standard Test Method for Measuring Length of Concrete Cores
ASTM C1543 : EN-Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
ASTM C1545 : EN-Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer
ASTM C1546 : EN-Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
ASTM C1547 : EN-Standard Classification for Fusion-Cast Refractory Blocks and Shapes
ASTM C1548 : EN-Standard Test Method for Dynamic Young s Modulus Shear Modulus and Poisson s Ratio of Refractory Materials by Impulse Excitation of Vibration
ASTM C1549 : EN-Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM C155 : EN-Standard Classification of Insulating Firebrick
ASTM C1550 : EN-Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1550 REV A : EN-Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1552 : EN-Standard Practice for Capping Concrete Masonry Units Related Units and Masonry Prisms for Compression Testing
ASTM C1552 REV A : EN-Standard Practice for Capping Concrete Masonry Units Related Units and Masonry Prisms for Compression Testing
ASTM C1553 : EN-Standard Guide for Drying Behavior of Spent Nuclear Fuel
ASTM C1554 : EN-Standard Guide for Materials Handling Equipment for Hot Cells
ASTM C1555 : EN-Standard Practice for Autoclaved Aerated Concrete Masonry
ASTM C1555 REV A : EN-Standard Practice for Autoclaved Aerated Concrete Masonry
ASTM C1556 : EN-Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C1557 : EN-Standard Test Method for Tensile Strength and Young-s Modulus of Fibers
ASTM C1558 : EN-Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
ASTM C1559 : EN-Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
ASTM C156 : EN-STANDARD TEST METHOD FOR WATER RETENTION BY CONCRETE CURING MATERIALS
ASTM C156 REV A : EN-Standard Test Method for Water Retention by Concrete Curing Materials
ASTM C156 REV B : EN-Standard Test Method for Water Retention by Concrete Curing Materials
ASTM C1560 : EN-Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
ASTM C1561 : EN-Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry
ASTM C1562 : EN-Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
ASTM C1563 : EN-Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain Waste Vent and Storm Piping Applications
ASTM C1564 : EN-Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
ASTM C1565 : EN-Standard Test Method for Determination of Pack-Set Index of Portland Cement
ASTM C1567 : EN-Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
ASTM C1568 : EN-Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
ASTM C1569 : EN-Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
ASTM C157 : EN-Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete-AASHTO No.: T160
ASTM C157/C157M : EN-Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM C1570 : EN-Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
ASTM C1571 : EN-Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment
ASTM C1572 : EN-Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
ASTM C1574 : EN-Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
ASTM C1576 : EN-Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM C1577 : EN-Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts Storm Drains and Sewers Designed According to AASHTO LRFD
ASTM C1577 REV A : EN-Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts Storm Drains and Sewers Designed According to AASHTO LRFD
ASTM C1579 : EN-Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
ASTM C158 : EN-STANDARD TEST METHODS FOR STRENGTH OF GLASS BY FLEXURE (DETERMINATION OF MODULUS OF RUPTURE) (R 1989) (E1-1989) (PNS 745:1989)
ASTM C1580 : EN-Standard Test Method for Water-Soluble Sulfate in Soil
ASTM C1581 : EN-Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M : EN-Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1581/C1581M REV A : EN-Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1583 : EN-Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM C1583/C1583M : EN-Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM C1585 : EN-Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
ASTM C1586 : EN-Standard Guide for Quality Assurance of Mortars
ASTM C1587 : EN-Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Compressive Strength Testing
ASTM C1587 REV A : EN-Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Compressive Strength Testing
ASTM C1589 : EN-Standard Practice for Outdoor Weathering of Construction Seals and Sealants
ASTM C159 : EN-Standard Specification for Vitrified Clay Filter Blocks
ASTM C1590 : EN-Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM C1591 : EN-Standard Test Method for Determination of the Modulus of Elasticity of AAC
ASTM C1592 : EN-Standard Guide for Nondestructive Assay Measurements
ASTM C1592/C1592M : EN-Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM C1594 : EN-Standard Specification for Polyimide Rigid Cellular Thermal Insulation
ASTM C1597M : EN-Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
ASTM C16 : EN-Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM C1600/C1600M : EN-Standard Specification for Rapid Hardening Hydraulic Cement
ASTM C1601 : EN-Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
ASTM C1602/C1602M : EN-Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
ASTM C1603 : EN-Standard Test Method for Measurement of Solids in Water
ASTM C1603 REV A : EN-Standard Test Method for Measurement of Solids in Water
ASTM C1604/C1604M : EN-Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
ASTM C1605 : EN-Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM C1606 : EN-Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM C1607 : EN-Standard Test Method for Determination of -Microwave Safe for Reheating- for Ceramicware
ASTM C1608 : EN-Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
ASTM C1609/C1609M : EN-Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1610/C1610M : EN-Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique1
ASTM C1610/C1610M REV A : EN-Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
ASTM C1611/C1611M : EN-Standard Test Method for Slump Flow of Self-Consolidating Concrete
ASTM C1611/C1611M REV A : EN-Standard Test Method for Slump Flow of Self-Consolidating Concrete
ASTM C1611/C1611M REV B : EN-Standard Test Method for Slump Flow of Self-Consolidating Concrete
ASTM C1613 : EN-Standard Specification for Precast Concrete Grease Interceptor Tanks
ASTM C1614 : EN-Standard Practice for the Determination of237Np232Th235U and238U in Urine by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry
ASTM C1615 : EN-Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
ASTM C1616 : EN-Standard Test Method for Determining the Moisture content of Organic and Inorganic Insulation Materials by Weight
ASTM C1617 : EN-Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM C1618 : EN-Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
ASTM C1618M : EN-Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure [Metric]
ASTM C1619 : EN-Standard Specification for Elastomeric Seals for Joining Concrete Structures
ASTM C162 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO GLASS AND GLASS PRODUCTS
ASTM C162 REV A : EN-Standard Terminology of Glass and Glass Products
ASTM C162 REV B : EN-STANDARD TERMINOLOGY OF GLASS AND GLASS PRODUCTS
ASTM C162 REV C : EN-STANDARD TERMINOLOGY OF GLASS AND GLASS PRODUCTS
ASTM C1620 : EN-Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
ASTM C1621/C1621M : EN-Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
ASTM C1621/C1621M REV A : EN-Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
ASTM C1621/C1621M REV B : EN-Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
ASTM C1622/C1622M : EN-Standard Specification for Cold-Weather Admixture Systems
ASTM C1623 : EN-Standard Specification for Manufactured Concrete Masonry Lintels
ASTM C1624 : EN-Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM C1625 : EN-Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM C1628 : EN-Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe Using Rubber Gaskets
ASTM C1629/C1629M : EN-Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
ASTM C163 : EN-Standard Practice for Mixing Thermal Insulating Cement Samples
ASTM C1630 : EN-Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
ASTM C1631 : EN-Standard Specification for Cellular Polypropylene Thermal Insulation
ASTM C1634 : EN-Standard Specification for Concrete Facing Brick
ASTM C1635 : EN-Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM C1636 : EN-Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
ASTM C1636 REV A : EN-Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride
ASTM C1637 : EN-Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
ASTM C1638 : EN-Standard Guide for the Determination of Iodine-129 In Uranium Oxide
ASTM C1639 : EN-Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
ASTM C1642 : EN-Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
ASTM C1643 : EN-Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM C1644 : EN-Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
ASTM C1645 : EN-Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
ASTM C1645/C1645M : EN-Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
ASTM C1646/C1646M : EN-Standard Practice for Making and Curing Test Specimens for Evaluating Frost Resistance of Coarse Aggregate in Air-Entrained Concrete by Rapid Freezing and Thawing
ASTM C1646/C1646M REV A : EN-Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
ASTM C1647 : EN-Standard Practice for Removal of Uranium or Plutonium or both for Impurity Assay in Uranium or Plutonium Materials
ASTM C1648 : EN-Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
ASTM C1649 : EN-Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass Coated and Uncoated
ASTM C165 : EN-Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C1650 : EN-Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass Coated and Uncoated
ASTM C1652/C1652M : EN-Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
ASTM C1655 : EN-Standard Classification of Fireclay and High-Alumina Mortars
ASTM C1656 : EN-Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM C1658/C1658M : EN-Standard Specification for Glass Mat Gypsum Panels
ASTM C166 : EN-Standard Test Method for Covering Capacity and Volume Change upon Drying of Thermal Insulating Cement
ASTM C1660 : EN-Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
ASTM C1661 : EN-Standard Guide for Viewing Systems for Remotely Operated Facilities
ASTM C1662 : EN-Standard Practice for For Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
ASTM C1663 : EN-Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
ASTM C1666/C1666M : EN-Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
ASTM C1667 : EN-Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1668 : EN-Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating Ventilation and Air Conditioning (HVAC) Systems
ASTM C167 : EN-STANDARD TEST METHODS FOR THICKNESS AND DENSITY OF BLANKET OR BATT THERMAL INSULATIONS
ASTM C1671 : EN-Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
ASTM C1672 : EN-Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C1673 : EN-Standard Terminology of C26.10 Nondestructive Assay Methods
ASTM C1674 : EN-Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM C1676 : EN-Standard Specification for Microporous Thermal Insulation
ASTM C1677 : EN-Standard Specification for Joints for Concrete Box Using Rubber Gaskets
ASTM C1678 : EN-Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
ASTM C1679 : EN-Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
ASTM C168 : EN-Standard Terminology Relating to Thermal Insulation
ASTM C168 REV A : EN-STANDARD DEFINITIONS OF TERMS RELATING TO THERMAL INSULATING MATERIALS
ASTM C168 REV B : EN-Standard Terminology Relating to Thermal Insulation
ASTM C1681 : EN-Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM C1682 : EN-Standard Guide for Characterization of Spent Nuclear Fuel in Support of Geologic Repository Disposal
ASTM C1683 : EN-Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
ASTM C1684 : EN-Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength
ASTM C1685 : EN-Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
ASTM C1686 : EN-Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
ASTM C1688/C1688M : EN-Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
ASTM C1689 : EN-Standard Practice for Subsampling of Uranium Hexafluoride
ASTM C1689 REV A : EN-Standard Practice for Subsampling of Uranium Hexafluoride
ASTM C169 : EN-Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
ASTM C1691 : EN-Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
ASTM C1692 : EN-Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
ASTM C1693 : EN-Standard Specification for Autoclaved Aerated Concrete (AAC)
ASTM C1694 : EN-Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
ASTM C1695 : EN-Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
ASTM C1697 : EN-Standard Specification for Blended Supplementary Cementitious Materials
ASTM C1698 : EN-Standard Test Method for Autogenous Strain of Cement Paste and Mortar
ASTM C1699 : EN-Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C170 : EN-Standard Test Method for Compressive Strength of Dimension Stone
ASTM C170/C170M : EN-Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1701/C1701M : EN-Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM C1702 : EN-Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1702 REV A : EN-Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM C1703 : EN-Standard Practice for Sampling of Gaseous Uranium Hexafluoride
ASTM C1704/C1704M : EN-Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM C1704/C1704M REV A : EN-Standard Test Method for Sampling and Testing Structural Cementitious Panels
ASTM C1705/C1705M : EN-Standard Specification for Structural Cementitious Panels
ASTM C1707 : EN-Standard Specification for Specification for Pozzolanic Hydraulic Lime for Structural Purposes
ASTM C171 : EN-Standard Specification for Sheet Materials for Curing Concrete
ASTM C171 REV A : EN-Standard Specification for Sheet Materials for Curing Concrete
ASTM C1710 : EN-Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
ASTM C1712 : EN-Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
ASTM C1713 : EN-Standard Specification for Mortars for the Repair of Historic Masonry
ASTM C1714/C1714M : EN-Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
ASTM C1715 : EN-Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
ASTM C1716/C1716M : EN-Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units Related Units and Prisms
ASTM C1717 : EN-Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels
ASTM C1718 : EN-Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
ASTM C172 : EN-Standard Practice for Sampling Freshly Mixed Concrete-AASHTO T141
ASTM C172 REV A : EN-Standard Practice for Sampling Freshly Mixed Concrete
ASTM C1721 : EN-Standard Guide for Petrographic Examination of Dimension Stone
ASTM C1726/C1726M : EN-Standard Guide for Use of Modeling for Passive Gamma Measurements
ASTM C1729 : EN-Standard Specification for Aluminum Jacketing for Insulation
ASTM C173 : EN-STANDARD TEST METHOD FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE VOLUMETRIC METHOD
ASTM C173 REV A : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C173/C173M : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method-El: November 2001
ASTM C173/C173M REV A : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C1737 : EN-Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C174 : EN-STANDARD METHOD OF MEASURING LENGTH OF DRILLED CONCRETE CORES
ASTM C174/C174M : EN-Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores-AASHTO No.: T 148
ASTM C177 : EN-Standard Test Method for Steady-State Thermal Transmission Properities by Means of the Gaurded Hot Plate
ASTM C179 : EN-Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
ASTM C180 : EN-STANDARD METHOD OF PANEL SPALLING TESTING FIRECLAY PLASTIC REFRACTORIES
ASTM C181 : EN-Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
ASTM C182 : EN-Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C183 : EN-STANDARD PRACTICE FOR SAMPLING AND THE AMOUNT OF TESTING OF HYDRAULIC CEMENT (AASHTO T127)
ASTM C183 REV A : EN-Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM C184 : EN-Standard Test Method for Fineness of Hydraulic Cement by the 150-Micrometer (No. 100) and 75-Micrometer (No. 200) Sieves
ASTM C185 : EN-STANDARD TEST METHOD FOR AIR CONTENT OF HYDRAULIC CEMENT MORTAR (AASHTO NO. T 137)
ASTM C185 REV A : EN-STANDARD TEST METHOD FOR AIR CONTENT OF HYDRAULIC CEMENT MORTAR (AASHTO T137)
ASTM C186 : EN-Standard Test Method for Heat of Hydration of Hydraulic Cement
ASTM C186 REV A : EN-Standard Test Method for Heat of Hydration of Hydraulic Cement
ASTM C187 : EN-Standard Test Method for Normal Consistency of Hydraulic Cement-AASHTO No.: T129