STD-ASTM CXXXX Conti 2

ASTM A , ASTM B ,  ASTM C | 1 |2 || 3 |,  ASTM D , ASTM E ASTM F , ASTM G ,

  • ASTM C188 : EN-Standard Test Method for Density of Hydraulic Cement-AASHTO No.: T133
  • ASTM C190 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF HYDRAULIC CEMENT MORTARS
  • ASTM C191 : EN-STANDARD TEST METHOD FOR TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE (AASHTO NO. T 131)
  • ASTM C191 REV A : EN-Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle-AASHTO No.: T131
  • ASTM C191 REV B : EN-Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle-AASHTO No.: T131
  • ASTM C192 : EN-STANDARD PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY
  • ASTM C192 REV A : EN-STANDARD PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY (AASHTO T126)
  • ASTM C192/C192M : EN-Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
  • ASTM C194 : EN-Standard Specification for ASBESTOS THERMAL INSULATION AND FINISHING CEMENT
  • ASTM C195 : EN-Standard Specification for Mineral Fiber Thermal Insulating Cement
  • ASTM C196 : EN-Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
  • ASTM C198 : EN-Standard Test Method for Cold Bonding Strength of Refractory Mortar
  • ASTM C199 : EN-Standard Test Method for Pier Test for Refractory Mortars
  • ASTM C20 : EN-Standard Test Methods for Apparent Porosity Water Absorption Apparent Specific Gravity and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
  • ASTM C201 : EN-Standard Test Method for Thermal Conductivity of Refractories
  • ASTM C202 : EN-Standard Test Method for Thermal Conductivity of Refractory Brick
  • ASTM C203 : EN-STANDARD TEST METHODS FOR BREAKING LOAD AND FLEXURAL PROPERTIES OF BLOCK-TYPE THERMAL INSULATION
  • ASTM C203 REV A : EN-Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
  • ASTM C204 : EN-Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus (AASHTO NO.: T153)
  • ASTM C204 REV A : EN-STANDARD TEST METHOD FOR FINENESS OF PORTLAND CEMENT BY AIR PERMEABILITY APPARATUS (AASHTO NO. T 153)
  • ASTM C206 : EN-Standard Specification for Finishing Hydrated Lime
  • ASTM C207 : EN-Standard Specification for Hydrated Lime for Masonry Purposes
  • ASTM C208 : EN-Standard Specification for Cellulosic Fiber Insulating Board
  • ASTM C208 REV A : EN-Standard Specification for Cellulosic Fiber Insulating Board
  • ASTM C209 : EN-Standard Test Methods for Cellulosic Fiber Insulating Board
  • ASTM C209 REV A : EN-Standard Test Methods for Cellulosic Fiber Insulating Board
  • ASTM C210 : EN-Standard Test Method for Reheat Change of Insulating Firebrick
  • ASTM C212 : EN-Standard Specification for Structural Clay Facing Tile
  • ASTM C215 : EN-Standard Test Method for Fundamental Transverse Longitudinal and Torsional Resonant Frequencies of Concrete Specimens
  • ASTM C216 : EN-STANDARD SPECIFICATION FOR FACING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C216 REV A : EN-Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
  • ASTM C216 REV B : EN-STANDARD SPECIFICATION FOR FACING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C216 REV C : EN-STANDARD SPECIFICATION FOR FACING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C216 REV D : EN-STANDARD SPECIFICATION FOR FACING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C217 : EN-Standard Test Method for Weather Resistance of Slate
  • ASTM C217/C217M : EN-Standard Test Method for Weather Resistance of Slate
  • ASTM C219 : EN-Standard Terminology Relating to Hydraulic Cement
  • ASTM C219 REV A : EN-Standard Terminology Relating to Hydraulic Cement
  • ASTM C22 : EN-STANDARD SPECIFICATION FOR GYPSUM
  • ASTM C22/C22M : EN-Standard Specification for Gypsum-E1
  • ASTM C22/C22M REV A : EN-STANDARD SPECIFICATION FOR GYPSUM
  • ASTM C220 : EN-Standard Specification for Flat Asbestos-Cement Sheets
  • ASTM C221 : EN-STANDARD SPECIFICATION FOR CORRUGATED ASBESTOS- CEMENT SHEETS
  • ASTM C222 : EN-Standard Specification for Asbestos-Cement Roofing Shingles
  • ASTM C223 : EN-Standard Specification for Asbestos-Cement Siding
  • ASTM C224 : EN-Standard Practice for Sampling Glass Containers
  • ASTM C225 : EN-Standard Test Methods for Resistance of Glass Containers to Chemical Attack
  • ASTM C226 : EN-STANDARD SPECIFICATION FOR AIR-ENTRAINING ADDITIONS FOR USE IN THE MANUFACTURE OF AIR- ENTRAINING PORTLAND CEMENT
  • ASTM C227 : EN-Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
  • ASTM C227 REV A : EN-Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
  • ASTM C230 : EN-STANDARD SPECIFICATION FOR FLOW TABLE FOR USE IN TESTS OF HYDRAULIC CEMENT
  • ASTM C230/C230M : EN-Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
  • ASTM C231 : EN-STANDARD TEST METHOD FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE PRESSURE METHOD
  • ASTM C231 REV A : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231 REV B : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231 REV C : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C231/C231M REV B : EN-Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C232 : EN-Standard Test Methods for Bleeding of Concrete
  • ASTM C232/C232M : EN-Standard Test Methods for Bleeding of Concrete
  • ASTM C233 : EN-Standard Test Method for Air-Entraining Admixtures for Concrete
  • ASTM C233 REV A : EN-STANDARD TEST METHOD FOR AIR-ENTRAINING ADMIXTURES FOR CONCRETE
  • ASTM C234 : EN-STANDARD TEST METHOD FOR COMPARING CONCRETES ON THE BASIS OF THE BOND DEVELOPED WITH REINFORCING STEEL-Discontinued 2000; No Replacement
  • ASTM C236 : EN-STANDARD TEST METHOD FOR STEADY-STATE THERMAL PERFORMANCE OF BUILDING ASSEMBLIES BY MEANS OF A GUARDED HOT BOX
  • ASTM C24 : EN-Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
  • ASTM C240 : EN-Standard Test Methods of Testing Cellular Glass Insulation Block
  • ASTM C241 : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF STONE SUBJECTED TO FOOT TRAFFIC
  • ASTM C241/C241M : EN-Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
  • ASTM C242 : EN-STANDARD TERMINOLOGY OF CERAMIC WHITEWARES AND RELATED PRODUCTS
  • ASTM C242 REV A : EN-STANDARD TERMINOLOGY OF CERAMIC WHITEWARES AND RELATED PRODUCTS
  • ASTM C242 REV B : EN-Standard Terminology of Ceramic Whitewares and Related Products
  • ASTM C243 : EN-Standard Test Method for Bleeding of Cement Pastes and Mortars
  • ASTM C25 : EN-Standard Test Methods for Chemical Analysis of Limestone Quicklime and Hydrated Lime
  • ASTM C25 REV A : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE QUICKLIME AND HYDRATED LIME
  • ASTM C25 REV B : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE QUICKLIME AND HYDRATED LIME
  • ASTM C260 : EN-Standard Specification for Air-Entraining Admixtures for Concrete
  • ASTM C265 : EN-Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
  • ASTM C266 : EN-STANDARD TEST METHOD FOR TIME OF SETTING OF HYDRAULIC-CEMENT PASTE BY GILLMORE NEEDLES
  • ASTM C267 : EN-Standard Test Methods for Chemical Resistance of Mortars Grouts and Monolithic Surfacings and Polymer Concretes
  • ASTM C27 : EN-Standard Classification of Fireclay and High-Alumina Refractory Brick
  • ASTM C270 : EN-STANDARD SPECIFICATION FOR MORTAR FOR UNIT MASONRY
  • ASTM C270 REV A : EN-Standard Specification for Mortar for Unit Masonry
  • ASTM C270 REV B : EN-Standard Specification for Mortar for Unit Masonry
  • ASTM C271 : EN-STANDARD TEST METHOD FOR DENSITY OF CORE MATERIALS FOR STRUCTURAL SANDWICH CONSTRUCTIONS (R 1988)
  • ASTM C271/C271M : EN-Standard Test Method for Density of Sandwich Core Materials
  • ASTM C272 : EN-Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
  • ASTM C273 : EN-STANDARD TEST METHOD FOR SHEAR PROPERTIES IN FLATWISE PLANE OF FLAT SANDWICH CONSTRUCTIONS OR SANDWICH CORES (R 1988) (E1-1988)
  • ASTM C273/C273M : EN-Standard Test Method for Shear Properties of Sandwich Core Materials
  • ASTM C273/C273M REV A : EN-Standard Test Method for Shear Properties of Sandwich Core Materials
  • ASTM C274 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO STRUCTURAL SANDWICH CONSTRUCTIONS (R 1988)
  • ASTM C276 : EN-Specification for Magnesium Chloride
  • ASTM C279 : EN-Standard Specification for Chemical-Resistant Masonry Units
  • ASTM C28 : EN-STANDARD SPECIFICATION FOR GYPSUM PLASTERS
  • ASTM C28/C28M : EN-Standard Specification for Gypsum Plasters
  • ASTM C282 : EN-Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
  • ASTM C283 : EN-Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
  • ASTM C285 : EN-Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
  • ASTM C286 : EN-Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems
  • ASTM C286 REV A : EN-STANDARD TERMINOLOGY RELATING TO PORCELAIN ENAMEL AND CERAMIC-METAL SYSTEMS (R 1993)
  • ASTM C287 : EN-STANDARD SPECIFICATION FOR CHEMICAL-RESISTANT SULFUR MORTAR
  • ASTM C287 REV A : EN-Standard Specification for Chemical-Resistant Sulfur Mortar
  • ASTM C288 : EN-Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
  • ASTM C289 : EN-Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
  • ASTM C29 : EN-STANDARD TEST METHOD FOR UNIT WEIGHT AND VOIDS IN AGGREGATE
  • ASTM C29 REV A : EN-STANDARD TEST METHOD FOR UNIT WEIGHT AND VOIDS IN AGGREGATE
  • ASTM C29/C29M : EN-Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate-AASHTO No.: T 19/T19M
  • ASTM C29/C29M REV A : EN-Standard Test Method for Unit Weight and Voids in Aggregate-AASHTO T19
  • ASTM C293 : EN-Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)
  • ASTM C294 : EN-Standard Descriptive Nomenclature for Constituents of Natural Mineral Aggregates
  • ASTM C295 : EN-Standard Guide for Petrographic Examination of Aggregates for Concrete
  • ASTM C296 : EN-STANDARD SPECIFICATION FOR ASBESTOS-CEMENT PRESSURE PIPE
  • ASTM C296/C296M : EN-Standard Specification for Asbestos-Cement Pressure Pipe
  • ASTM C297 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF FLAT SANDWICH CONSTRUCTIONS IN FLATWISE PLANE (R 1988) (E1-1988)
  • ASTM C297/C297M : EN-Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
  • ASTM C3 : EN-STANDARD TEST FOR FIREPROOF PARTITION CONSTRUCTION.
  • ASTM C301 : EN-Standard Test Methods for Vitrified Clay Pipe
  • ASTM C301 REV A : EN-Standard Test Methods for Vitrified Clay Pipe
  • ASTM C302 : EN-STANDARD TEST METHOD FOR DENSITY OF PREFORMED PIPE-COVERING-TYPE THERMAL INSULATION (R 1989)
  • ASTM C303 : EN-Standard Test Method for Dimensions and Density of Preformed Block and Board Type Thermal Insulation
  • ASTM C305 : EN-Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency-AASHTO No.: T162
  • ASTM C307 : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF CHEMICAL-RESISTANT MORTAR GROUTS AND MONOLITHIC SURFACINGS (R 1988)
  • ASTM C307 REV A : EN-STANDARD TEST METHOD FOR TENSILE STRENGTH OF CHEMICAL-RESISTANT MORTAR GROUTS AND MONOLITHIC SURFACINGS
  • ASTM C308 : EN-Standard Test Methods for Working Setting and Service Strength Setting Times of Chemical-Resistant Resin Mortars
  • ASTM C309 : EN-Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
  • ASTM C309 REV A : EN-Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
  • ASTM C31 : EN-STANDARD PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD
  • ASTM C31 REV A : EN-STANDARD PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD
  • ASTM C31/C31M : EN-Standard Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C31/C31M REV A : EN-Standard Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C31/C31M REV B : EN-Standard Practice for Making and Curing Concrete Test Specimens in the Field
  • ASTM C311 : EN-Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311 REV A : EN-STANDARD TEST METHODS FOR SAMPLING AND TESTING FLY ASH OR NATURAL POZZOLANS FOR USE AS A MINERAL ADMIXTURE IN PORTLAND- CEMENT CONCRETE
  • ASTM C311 REV B : EN-Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
  • ASTM C313 : EN-STANDARD TEST METHOD FOR ADHERENCE OF PORCELAIN ENAMEL AND CERAMIC COATINGS TO SHEET METAL
  • ASTM C315 : EN-STANDARD SPECIFICATION FOR CLAY FLUE LININGS
  • ASTM C315 REV B : EN-Standard Specification for Clay Flue Linings
  • ASTM C315 REV C : EN-STANDARD SPECIFICATION FOR CLAY FLUE LININGS (R 1983)
  • ASTM C316 : EN-STANDARD CLASSIFICATION OF SINGLE- AND DOUBLE-SCREENED GROUND REFRACTORY MATERIALS
  • ASTM C317 : EN-STANDARD SPECIFICATION FOR GYPSUM CONCRETE
  • ASTM C317 REV A : EN-Standard Specification for Gypsum Concrete
  • ASTM C317/C317M : EN-Standard Specification for Gypsum Concrete
  • ASTM C318/C318M : EN-Standard Specification for Gypsum Formboard
  • ASTM C32 : EN-STANDARD SPECIFICATION FOR SEWER AND MANHOLE BRICK (MADE FROM CLAY OR SHALE) (AASHTO M91)
  • ASTM C321 : EN-STANDARD TEST METHOD FOR BOND STRENGTH OF CHEMICAL-RESISTANT MORTARS (R 1988)
  • ASTM C322 : EN-Standard Practice for Sampling Ceramic Whiteware Clays
  • ASTM C323 : EN-Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
  • ASTM C324 : EN-Standard Test Method for Free Moisture in Ceramic Whiteware Clays
  • ASTM C325 : EN-Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
  • ASTM C326 : EN-Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
  • ASTM C329 : EN-Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
  • ASTM C33 : EN-Standard Specification for Concrete Aggregates
  • ASTM C33 REV A : EN-STANDARD SPECIFICATION FOR CONCRETE AGGREGATES
  • ASTM C33/C33M : EN-Standard Specification for Concrete Aggregates
  • ASTM C330 : EN-Standard Specification for Lightweight Aggregates for Structural Concrete
  • ASTM C330 REV A : EN-Standard Specification for Lightweight Aggregates for Structural Concrete
  • ASTM C330 REV B : EN-Standard Specification for Lightweight Aggregates for Structural Concrete
  • ASTM C330/C330M : EN-Standard Specification for Lightweight Aggregates for Structural Concrete
  • ASTM C331 : EN-STANDARD SPECIFICATION FOR LIGHTWEIGHT AGGREGATES FOR CONCRETE MASONARY UNITS
  • ASTM C331 REV A : EN-STANDARD SPECIFICATION FOR LIGHTWEIGHT AGGREGATES FOR CONCRETE MASONRY UNITS
  • ASTM C331 REV B : EN-Standard Specification for Lightweight Aggregates for Concrete Masonry Units
  • ASTM C332 : EN-Standard Specification for Lightweight Aggregates for Insulating Concrete
  • ASTM C335 : EN-Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation
  • ASTM C335 REV A : EN-Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
  • ASTM C336 : EN-Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
  • ASTM C338 : EN-Standard Test Method for Softening Point of Glass
  • ASTM C34 : EN-Standard Specification for Structural Clay Load-Bearing Wall Tile
  • ASTM C341 : EN-Standard Test Method for Length Change of Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
  • ASTM C341/C341M : EN-Standard Practice for Length Change of Cast Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
  • ASTM C341/C341M REV A : EN-Standard Practice for Length Change of Cast Drilled or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
  • ASTM C342 : EN-Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations
  • ASTM C346 : EN-Standard Test Method for 45-Deg Specular Gloss of Ceramic Materials
  • ASTM C347 : EN-STANDARD TEST METHOD FOR REFLECTANCE REFLECTIVITY AND COEFFICIENT OF SCATTER OF WHITE PORCELAIN ENAMELS
  • ASTM C348 : EN-Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
  • ASTM C349 : EN-Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
  • ASTM C35 : EN-Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
  • ASTM C35 REV A : EN-STANDARD SPECIFICATION FOR INORGANIC AGGREGATES FOR USE IN GYPSUM PLASTER
  • ASTM C351 : EN-STANDARD TEST METHOD FOR MEAN SPECIFIC HEAT OF THERMAL INSULATION
  • ASTM C351 REV A : EN-STANDARD TEST METHOD FOR MEAN SPECIFIC HEAT OF THERMAL INSULATION
  • ASTM C351 REV B : EN-Standard Test Method for Mean Specific Heat of Thermal Insulation
  • ASTM C353 : EN-STANDARD TEST METHOD FOR ADHESION OF DRIED THERMAL INSULATING OR FINISHING CEMENT
  • ASTM C354 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF THERMAL INSULATING OR FINISHING CEMENT
  • ASTM C356 : EN-Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  • ASTM C357 : EN-Standard Test Method for Bulk Density of Granular Refractory Materials
  • ASTM C359 : EN-Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
  • ASTM C359 REV A : EN-Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
  • ASTM C36 : EN-STANDARD SPECIFICATION FOR GYPSUM WALLBOARD
  • ASTM C36 REV A : EN-STANDARD SPECIFICATION FOR GYPSUM WALLBOARD
  • ASTM C36 REV B : EN-Standard Specification for Gypsum Wallboard
  • ASTM C36/C36M : EN-Standard Specification for Gypsum Wallboard
  • ASTM C360 : EN-STANDARD TEST METHOD FOR BALL PENETRATION IN FRESH PORTLAND CEMENT CONCRETE
  • ASTM C361 : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE
  • ASTM C361 REV A : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE
  • ASTM C361 REV B : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE
  • ASTM C361M : EN-Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
  • ASTM C361M REV A : EN-Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric]
  • ASTM C363 : EN-STANDARD TEST METHOD FOR DELAMINATION STRENGTH OF HONEYCOMB TYPE CORE MATERIAL (R 1988)
  • ASTM C363/C363M : EN-Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
  • ASTM C364 : EN-Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
  • ASTM C364/C364M : EN-Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
  • ASTM C365 : EN-STANDARD METHODS OF TEST FOR FLATWISE COMPRESSIVE STRENGTH OF SANDWICH CORES (R 1970)
  • ASTM C365/C365M : EN-Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
  • ASTM C366 : EN-Standard Test Methods for Measurement of Thickness of Sandwich Cores
  • ASTM C366/C366M : EN-Standard Test Methods for Measurement of Thickness of Sandwich Cores
  • ASTM C367 : EN-STANDARD TEST METHODS FOR STRENGTH PROPERTIES OF PREFABRICATED ARCHITECTURAL ACOUSTICAL TILE OR LAY-IN CEILING PANELS (R 1989) (E1-1989)
  • ASTM C367/C367M : EN-Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
  • ASTM C368 : EN-STANDARD TEST METHOD FOR IMPACT RESISTANCE OF CERAMIC TABLEWARE (R 1982)
  • ASTM C37 : EN-STANDARD SPECIFICATION FOR GYPSUM LATH
  • ASTM C37 REV A : EN-STANDARD SPECIFICATION FOR GYPSUM LATH
  • ASTM C37/C37M : EN-Standard Specification for Gypsum Lath
  • ASTM C370 : EN-STANDARD TEST METHOD FOR MOISTURE EXPANSION OF FIRED WHITEWARE PRODUCTS (R 1981)
  • ASTM C371 : EN-Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
  • ASTM C372 : EN-Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method
  • ASTM C373 : EN-STANDARD TEST METHOD FOR WATER ABSORPTION BULK DENSITY APPARENT POROSITY AND APPARENT SPECIFIC GRAVITY OF FIRED WHITEWARE PRODUCTS (R 1982)
  • ASTM C374 : EN-Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
  • ASTM C375 : EN-Standard Classification of Water Used in Milling of Porcelain Enamel
  • ASTM C38 : EN-Standard Method for Panel Spalling Testing Refractory Brick
  • ASTM C383 : EN-STANDARD TEST METHOD FOR WET ADHESION OF THERMAL INSULATING CEMENTS TO METAL
  • ASTM C384 : EN-Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
  • ASTM C384 REV A : EN-STANDARD TEST METHOD FOR IMPEDANCE AND ABSORPTION OF ACOUSTICAL MATERIALS BY THE IMPEDANCE TUBE METHOD
  • ASTM C385 : EN-Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils
  • ASTM C386 : EN-STANDARD PRACTICE FOR USE OF CHEMICAL-RESISTANT SULFUR MORTAR
  • ASTM C387 : EN-Standard Specification for Packaged Dry Combined Materials for Mortar and Concrete
  • ASTM C387 REV A : EN-Standard Specification for Packaged Dry Combined Materials for Mortar and Concrete
  • ASTM C387/C387M : EN-Standard Specification for Packaged Dry Combined Materials for Mortar and Concrete
  • ASTM C387/C387M REV A : EN-Standard Specification for Packaged Dry Combined Materials for Mortar and Concrete
  • ASTM C39 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF CYLINDRICAL CONCRETE SPECIMENS (AASHTO T22)
  • ASTM C39 REV A : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF CYLINDRICAL CONCRETE SPECIMENS (AASHTO T22)
  • ASTM C39/C39M : EN-Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
  • ASTM C39/C39M REV A : EN-Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
  • ASTM C390 : EN-Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
  • ASTM C393 : EN-Standard Test Method for Flexural Properties of Sandwich Constructions
  • ASTM C394 : EN-Standard Test Method for Shear Fatigue of Sandwich Core Materials
  • ASTM C395 : EN-Standard Specification for Chemical-Resistant Resin Mortars
  • ASTM C397 : EN-STANDARD PRACTICE FOR USE OF CHEMICALLY SETTING CHEMICAL-RESISTANT SILICATE AND SILICA MORTARS
  • ASTM C398 : EN-STANDARD PRACTICE FOR USE OF HYDRAULIC CEMENT MORTARS IN CHEMICAL- RESISTANT MASONRY (R 1990)
  • ASTM C399 : EN-Standard Practice for Use of Chemical-Resistant Resin Mortars
  • ASTM C4 : EN-Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
  • ASTM C40 : EN-STANDARD TEST METHOD FOR ORGANIC IMPURITIES IN FINE AGGREGATES FOR CONCRETE-AASHTO NO. T21
  • ASTM C400 : EN-Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
  • ASTM C400 REV A : EN-STANDARD TEST METHODS FOR QUICKLIME AND HYDRATED LIME FOR NEUTRALIZATION OF WASTE ACID
  • ASTM C401 : EN-Standard Classification of Alumina and Alumina-Silicate Castable Refractories
  • ASTM C403 : EN-STANDARD TEST METHOD FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE
  • ASTM C403/C403M : EN-Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
  • ASTM C404 : EN-Standard Specification for Aggregates for Masonry Grout
  • ASTM C405 : EN-Standard Practice for Estimating Consistency of Wet-Mixed Thermal Insulating Cement
  • ASTM C406 : EN-Standard Specification for Roofing Slate
  • ASTM C408 : EN-Standard Test Method for Thermal Conductivity of Whiteware Ceramics
  • ASTM C409 : EN-STANDARD TEST METHOD FOR TORSION RESISTANCE OF LABORATORY SPECIMENS OF PORCELAIN ENAMELED IRON AND STEEL
  • ASTM C410 : EN-Standard Specification for Industrial Floor Brick
  • ASTM C411 : EN-Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
  • ASTM C412 : EN-Standard Specification for Concrete Drain Tile
  • ASTM C412 REV A : EN-Standard Specification for Concrete Drain Tile
  • ASTM C412M : EN-Standard Specification for Concrete Drain Tile [Metric]
  • ASTM C412M REV A : EN-Standard Specification for Concrete Drain Tile [Metric]
  • ASTM C413 : EN-Standard Test Method for Absorption of Chemical-Resistant Mortars Grouts and Monolithic Surfacings and Polymer Concretes
  • ASTM C414 : EN-Standard Test Method for Working Setting and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
  • ASTM C416 : EN-Standard Classification of Silica Refractory Brick
  • ASTM C417 : EN-STANDARD TEST METHOD FOR THERMAL CONDUCTIVITY OF UNFIRED MONOLITHIC REFRACTORIES
  • ASTM C418 : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF CONCRETE BY SANDBLASTING
  • ASTM C419 : EN-STANDARD PRACTICE FOR MAKING AND CURING TEST SPECIMENS OF MASTIC THERMAL INSULATION COATINGS (R 1990)
  • ASTM C42 : EN-STANDARD TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE (AASHTO NO. T 24)
  • ASTM C42 REV A : EN-STANDARD METHOD OF OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE (AASHTO NO.: T 24)
  • ASTM C42/C42M : EN-Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete-AASHTO No.: T24
  • ASTM C421 : EN-Standard Test Method for Tumbling Friability of Preformed Block-Type Thermal Insulation
  • ASTM C423 : EN-STANDARD TEST METHOD FOR SOUND ABSORPTION AND SOUND ABSORPTION COEFFICIENTS BY THE REVERBERATION ROOM METHOD
  • ASTM C423 REV A : EN-Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
  • ASTM C424 : EN-Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
  • ASTM C425 : EN-STANDARD SPECIFICATION FOR COMPRESSION JOINTS FOR VITRIFIED CLAY PIPE AND FITTINGS
  • ASTM C425 REV A : EN-STANDARD SPECIFICATION FOR COMPRESSION JOINTS FOR VITRIFIED CLAY PIPE AND FITTINGS
  • ASTM C425 REV B : EN-Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
  • ASTM C426 : EN-Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C426 REV A : EN-Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C428 : EN-Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe-Replaces C644 and C438
  • ASTM C429 : EN-Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
  • ASTM C43 : EN-Standard Terminology of Structural Clay Products
  • ASTM C43 REV A : EN-STANDARD TERMINOLOGY OF STRUCTURAL CLAY PRODUCTS
  • ASTM C430 : EN-Standard Test Method for Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve
  • ASTM C435 : EN-Standard Classification of Steel Pouring Pit Fireclay Refractories
  • ASTM C436 : EN-STANDARD TEST METHOD FOR REHEAT CHANGE OF CARBON REFRACTORY BRICK AND SHAPES
  • ASTM C439 : EN-STANDARD TEST METHOD FOR RESISTANCE TO THERMAL SPALLING OF SILICA BRICK
  • ASTM C441 : EN-STANDARD TEST METHOD FOR EFFECTIVENESS OF MINERAL ADMIXTURES OR GROUND BLAST-FURNACE SLAG IN PREVENTING EXCESSIVE EXPANSION OF CONCRETE DUE TO THE ALKALI-SILICA REACTION
  • ASTM C441 REV A : EN-Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
  • ASTM C442 : EN-STANDARD SPECIFICATION FOR GYPSUM BACKING BOARD AND COREBOARD
  • ASTM C442 REV A : EN-STANDARD SPECIFICATION FOR GYPSUM BACKING BOARD AND COREBOARD (R 1988)
  • ASTM C442/C442M : EN-Standard Specification for Gypsum Backing Board Gypsum Coreboard and Gypsum Shaftliner Board
  • ASTM C442/C442M REV A : EN-Standard Specification for Gypsum Backing Board Gypsum Coreboard and Gypsum Shaftliner Board
  • ASTM C443 : EN-Standard Specification for Joints for Concrete Pipe and Manholes Using Rubber Gaskets
  • ASTM C443 REV A : EN-STANDARD SPECIFICATION FOR JOINTS FOR CIRCULAR CONCRETE SEWER AND CULVERT PIPE USING RUBBER GASKETS (R 1990)
  • ASTM C443M : EN-Standard Specification for Joints for Concrete Pipe and Manholes Using Rubber Gaskets [Metric]
  • ASTM C443M REV A : EN-STANDARD SPECIFICATION FOR JOINTS FOR CIRCULAR CONCRETE SEWER AND CULVERT PIPE USING RUBBER GASKETS (METRIC) (R 1990)
  • ASTM C444 : EN-STANDARD SPECIFICATION FOR PERFORATED CONCRETE PIPE (AASHTO NO. M 175)
  • ASTM C444M : EN-STANDARD SPECIFICATION FOR PERFORATED CONCRETE PIPE (METRIC) (AASHTO NO. M 175)
  • ASTM C444M REV A : EN-STANDARD SPECIFICATION FOR PERFORATED CONCRETE PIPE (METRIC)
  • ASTM C446 : EN-STANDARD TEST METHOD FOR BREAKING LOAD AND CALCULATED MODULUS OF RUPTURE OF PREFORMED INSULATION FOR PIPES
  • ASTM C447 : EN-Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
  • ASTM C448 : EN-STANDARD TEST METHODS FOR ABRASION RESISTANCE OF PORCELAIN ENAMELS
  • ASTM C449 : EN-Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
  • ASTM C449/C449M : EN-STANDARD SPECIFICATION FOR MINERAL FIBER HYDRAULIC-SETTING THERMAL INSULATING AND FINISHING CEMENT
  • ASTM C450 : EN-STANDARD PRACTICE FOR PREFABRICATION AND FIELD FABRICATION OF THERMAL INSULATING FITTING COVERS FOR NPS PIPING VESSEL LAGGING AND DISHED HEAD SEGMENTS (R 1988) (E1-1988)
  • ASTM C451 : EN-STANDARD TEST METHOD FOR EARLY STIFFENING OF PORTLAND CEMENT (PASTE METHOD) (AASHTO T186)
  • ASTM C452 : EN-Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
  • ASTM C452 REV A : EN-STANDARD TEST METHOD FOR POTENTIAL EXPANSION OF PORTLAND CEMENT MORTARS EXPOSED TO SULFATE
  • ASTM C452/C452M : EN-Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
  • ASTM C454 : EN-Standard Practice for Disintegration of Carbon Refractories by Alkali
  • ASTM C455 : EN-Standard Classification of Chrome Brick Chrome-Magnesia Brick Magnesia-Chrome Brick and Magnesia Brick
  • ASTM C456 : EN-STANDARD TEST METHOD FOR HYDRATION RESISTANCE OF BASIC BRICK
  • ASTM C457 : EN-Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C457 REV A : EN-STANDARD PRACTICE FOR MICROSCOPICAL DETERMINATION OF AIR- VOID CONTENT AND PARAMETERS OF THE AIR- VOID SYSTEM IN HARDENED CONCRETE (E1-1990)
  • ASTM C457 REV B : EN-Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C457 REV C : EN-Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C457 REV D : EN-Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C457/C457M : EN-Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C457/C457M REV A : EN-Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C458 : EN-Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
  • ASTM C459 : EN-Standard Test Methods for Asbestos-Cement Flat Products
  • ASTM C460 : EN-STANDARD TERMINOLOGY FOR ASBESTOS-CEMENT
  • ASTM C461 : EN-Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
  • ASTM C464 : EN-STANDARD TEST METHOD FOR CORROSION EFFECT OF THERMAL INSULATING CEMENTS ON BASE METAL (R 1983) (E1-1983)
  • ASTM C465 : EN-Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
  • ASTM C465 REV A : EN-STANDARD SPECIFICATION FOR PROCESSING ADDITIONS FOR USE IN THE MANUFACTURE OF HYDRAULIC CEMENTS (E1-1986)
  • ASTM C466 : EN-STANDARD SPECIFICATIION FOR CHEMICALLY SETTING SILICATE AND SILICA CHEMICAL-RESISTANT MORTARS (E1-1979)
  • ASTM C467 : EN-Standard Classification of Mullite Refractories
  • ASTM C469 : EN-Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
  • ASTM C469 REV A : EN-STANDARD TEST METHOD FOR STATIC MODULUS OF ELASTICITY AND POISSON’S RATIO OF CONCRETE IN COMPRESSION
  • ASTM C470 : EN-STANDARD SPECIFICATION FOR MOLDS FOR FORMING CONCRETE TEST CYLINDERS VERTICALLY
  • ASTM C470 REV A : EN-STANDARD SPECIFICATION FOR MOLDS FOR FORMING CONCRETE TEST CYLINDERS VERTICALLY (AASHTO M205)
  • ASTM C470/C470M : EN-Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
  • ASTM C470/C470M REV A : EN-Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
  • ASTM C471 : EN-Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products
  • ASTM C471M : EN-Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
  • ASTM C472 : EN-Standard Test Methods for Physical Testing of Gypsum Gypsum Plasters and Gypsum Concrete
  • ASTM C472 REV A : EN-STANDARD TEST METHODS FOR PHYSICAL TESTING OF GYPSUM GYPSUM PLASTERS AND GYPSUM CONCRETE
  • ASTM C473 : EN-STANDARD TEST METHODS FOR PHYSICAL TESTING OF GYPSUM BOARD PRODUCTS AND GYPSUM LATH
  • ASTM C473 REV A : EN-STANDARD TEST METHODS FOR PHYSICAL TESTING OF GYPSUM BOARD PRODUCTS AND GYPSUM LATH
  • ASTM C474 : EN-Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
  • ASTM C475 : EN-STANDARD SPECIFICATION FOR JOINT COMPOUND AND JOINT TAPE FOR FINISHING GYPSUM BOARD
  • ASTM C475/C475M : EN-Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
  • ASTM C476 : EN-Standard Specification for Grout for Masonry
  • ASTM C478 : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE MANHOLE SECTIONS
  • ASTM C478 REV A : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE MANHOLE SECTIONS
  • ASTM C478 REV B : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE MANHOLE SECTIONS (E1-1991)
  • ASTM C478M : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE MANHOLE SECTIONS (METRIC)
  • ASTM C478M REV A : EN-Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
  • ASTM C478M REV B : EN-Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
  • ASTM C479 : EN-Standard Specification for Vitrified Clay Liner Plates
  • ASTM C480 : EN-Standard Test Method for Flexure Creep of Sandwich Constructions
  • ASTM C480/C480M : EN-Standard Test Method for Flexure Creep of Sandwich Constructions
  • ASTM C481 : EN-STANDARD TEST METHOD FOR LABORATORY AGING OF SANDWICH CONSTRUCTIONS (R 1988)
  • ASTM C482 : EN-Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement
  • ASTM C483 : EN-STANDARD TEST METHOD FOR ELECTRICAL RESISTANCE OF CONDUCTIVE CERAMIC TILE (R 1990)
  • ASTM C484 : EN-Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
  • ASTM C485 : EN-Standard Test Method for Measuring Warpage of Ceramic Tile
  • ASTM C488 : EN-Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
  • ASTM C490 : EN-STANDARD PRACTICE FOR USE OF APPARATUS FOR THE DETERMINATION OF LENGTH CHANGE OF HARDENED CEMENT PASTE MORTAR AND CONCRETE
  • ASTM C490 REV A : EN-Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste Mortar and Concrete
  • ASTM C490/C490M : EN-Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste Mortar and Concrete
  • ASTM C491 : EN-STANDARD TEST METHOD FOR MODULUS OF RUPTURE OF AIR-SETTING PLASTIC REFRACTORIES
  • ASTM C492 : EN-STANDARD TEST METHOD FOR HYDRATION OF GRANULAR DEAD-BURNED REFRACTORY DOLOMITE (R 1988)
  • ASTM C493 : EN-STANDARD TEST METHOD FOR BULK DENSITY AND POROSITY OF GRANULAR REFRACTORY MATERIALS BY MERCURY DISPLACEMENT
  • ASTM C494 : EN-Standard Specification for Chemical Admixtures for Concrete
  • ASTM C494 REV A : EN-Standard Specification for Chemical Admixtures for Concrete
  • ASTM C494/C494M : EN-Standard Specification for Chemical Admixtures for Concrete
  • ASTM C494/C494M REV A : EN-Standard Specification for Chemical Admixtures for Concrete
  • ASTM C495 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF LIGHTWEIGHT INSULATING CONCRETE
  • ASTM C495 REV A : EN-Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
  • ASTM C496 : EN-STANDARD TEST METHOD FOR SPLITTING TENSILE STRENGTH OF CYLINDRICAL CONCRETE SPECIMENS (AASHTO T198)
  • ASTM C496/C496M : EN-Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
  • ASTM C497 : EN-Standard Test Methods for Concrete Pipe Manhole Sections or Tile
  • ASTM C497 REV A : EN-STANDARD TEST METHODS FOR CONCRETE PIPE MANHOLE SECTIONS OR TILE
  • ASTM C497 REV B : EN-STANDARD METHODS OF TESTING CONCRETE PIPE SECTIONS OR TILE
  • ASTM C497M : EN-STANDARD TEST METHODS FOR CONCRETE PIPE MANHOLE SECTIONS OR TILE (METRIC)
  • ASTM C497M REV A : EN-STANDARD TEST METHODS FOR CONCRETE PIPE MANHOLE SECTIONS OR TILE (METRIC)
  • ASTM C497M REV B : EN-STANDARD METHODS OF TESTING CONCRETE PIPE SECTIONS OR TILE (METRIC)
  • ASTM C498 : EN-STANDARD SPECIFICATION FOR PERFORATED CLAY DRAIN TILE (R 1991)
  • ASTM C499 : EN-Standard Test Method for Facial Dimensions and Thickness of Flat Rectangular Ceramic Wall and Floor Tile
  • ASTM C5 : EN-Standard Specification for Quicklime for Structural Purposes
  • ASTM C50 : EN-Standard Practice for Sampling Sample Preparation Packaging and Marking of Lime and Limestone Products
  • ASTM C500 : EN-STANDARD TEST METHODS FOR ASBESTOS-CEMENT PIPE
  • ASTM C500 REV A : EN-STANDARD TEST METHODS FOR ASBESTOS-CEMENT PIPE
  • ASTM C501 : EN-Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
  • ASTM C502 : EN-STANDARD TEST METHOD FOR WEDGING OF FLAT RECTANGULAR CERAMIC WALL AND FLOOR TILE (R 1983)
  • ASTM C502 REV A : EN-Standard Test Method for Wedging of Flat Rectangular Ceramic Wall and Floor Tile
  • ASTM C503 : EN-Standard Specification for Marble Dimension Stone (Exterior)
  • ASTM C503 REV A : EN-Standard Specification for Marble Dimension Stone
  • ASTM C505 : EN-Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
  • ASTM C505 REV A : EN-Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
  • ASTM C505M : EN-STANDARD SPECIFICATION FOR NONREINFORCED CONCRETE IRRIGATION PIPE WITH RUBBER GASKET JOINTS (METRIC)
  • ASTM C505M REV A : EN-Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
  • ASTM C506 : EN-Standard Specification for Reinforced Concrete Arch Culvert Storm Drain and Sewer Pipe
  • ASTM C506 REV A : EN-Standard Specification for Reinforced Concrete Arch Culvert Storm Drain and Sewer Pipe
  • ASTM C506 REV B : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE ARCH CULVERT STORM DRAIN AND SEWER PIPE (AASHTO NO. M 206-81) (E1-1987)
  • ASTM C506M : EN-Standard Specification for Reinforced Concrete Arch Culvert Storm Drain and Sewer Pipe (Metric)
  • ASTM C506M REV A : EN-Standard Specification for Reinforced Concrete Arch Culvert Storm Drain and Sewer Pipe (Metric)
  • ASTM C507 : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT STORM DRAIN AND SEWER PIPE (AASHTO M207)
  • ASTM C507 REV A : EN-Standard Specification for Reinforced Concrete Elliptical Culvert Storm Drain and Sewer Pipe
  • ASTM C507M : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT STORM DRAIN AND SEWER PIPE (METRIC) (AASHTO NO. M 207-81)
  • ASTM C507M REV A : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT STORM DRAIN AND SEWER PIPE (METRIC)
  • ASTM C507M REV B : EN-Standard Specification for Reinforced Concrete Elliptical Culvert Storm Drain and Sewer Pipe [Metric]
  • ASTM C508 : EN-Standard Specification for Asbestos-Cement Underdrain Pipe-AASHTO No.: M 189-81I
  • ASTM C508/C508M : EN-Standard Specification for Asbestos-Cement Underdrain Pipe
  • ASTM C509 : EN-Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
  • ASTM C51 : EN-STANDARD TERMINOLOGY RELATING TO LIME AND LIMESTONE (AS USED BY THE INDUSTRY)
  • ASTM C51 REV A : EN-Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
  • ASTM C510 : EN-Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
  • ASTM C510 REV A : EN-Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
  • ASTM C511 : EN-STANDARD SPECIFICATION FOR MOIST CABINETS MOIST ROOMS AND WATER STORAGE TANKS USED IN THE TESTING OF HYDRAULIC CEMENTS AND CONCRETES (E1-1991) (R-1991)
  • ASTM C512 : EN-Standard Test Method for Creep of Concrete in Compression
  • ASTM C513 : EN-STANDARD METHOD FOR SECURING PREPARING AND TESTING SPECIMENS FROM HARDENED LIGHTWEIGHT INSULATING CONCRETE FOR COMPRESSIVE STRENGTH
  • ASTM C514 : EN-Standard Specification for Nails for the Application of Gypsum Board
  • ASTM C515 : EN-Standard Specification for Chemical-Resistant Ceramic Tower Packings
  • ASTM C516 : EN-Standard Specification for Vermiculite Loose Fill Thermal Insulation
  • ASTM C517 : EN-STANDARD SPECIFICATION FOR DIATOMACEOUS EARTH BLOCK AND PIPE THERMAL INSULATION
  • ASTM C518 : EN-Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM C519 : EN-Standard Test Method for Density of Fibrous Loose-Fill Building Insulations
  • ASTM C520 : EN-Standard Test Methods for Density of Granular Loose Fill Insulations
  • ASTM C522 : EN-Standard Test Method for Airflow Resistance of Acoustical Materials
  • ASTM C523 : EN-STANDARD TEST METHOD FOR LIGHT REFLECTANCE OF ACOUSTICAL MATERIALS BY THE INTEGRATING SPHERE REFLECTOMETER
  • ASTM C530 : EN-STANDARD SPECIFICATION FOR STRUCTURAL CLAY NON-LOAD-BEARING SCREEN TILE (R 1981) (E1-1985)
  • ASTM C531 : EN-Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars Grouts and Monolithic Surfacings and Polymer Concretes
  • ASTM C532 : EN-STANDARD SPECIFICATION FOR STRUCTURAL INSULATING FORMBOARD (CELLULOSIC FIBER)
  • ASTM C533 : EN-Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
  • ASTM C534 : EN-STANDARD SPECIFICATION FOR PREFORMED FLEXIBLE ELASTOMERIC CELLULAR THERMAL INSULATION IN SHEET AND TUBULAR FORM
  • ASTM C534 REV A : EN-Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
  • ASTM C534/C534M : EN-Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
  • ASTM C535 : EN-STANDARD TEST METHOD FOR RESISTANCE TO DEGRADATION OF LARGE- SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE (R 1987)
  • ASTM C536 : EN-Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
  • ASTM C537 : EN-Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
  • ASTM C538 : EN-Standard Test Method for Color Retention of Red Orange and Yellow Porcelain Enamels
  • ASTM C539 : EN-Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method
  • ASTM C540 : EN-STANDARD TEST METHOD FOR IMAGE GLOSS OF PORCELAIN ENAMEL SURFACES
  • ASTM C541 : EN-STANDARD SPECIFICATION FOR LININGS FOR ASBESTOS-CEMENT PIPE
  • ASTM C542 : EN-STANDARD SPECIFICATION FOR LOCK-STRIP GASKETS (R 1984)
  • ASTM C543 : EN-STANDARD SPECIFICATION FOR SLATE BLACKBOARDS
  • ASTM C544 : EN-Standard Test Method for Hydration of Magnesite or Periclase Grain
  • ASTM C545 : EN-Standard Classification of Zircon Refractories
  • ASTM C545 REV A : EN-Standard Classification of Zircon Refractories
  • ASTM C546 : EN-STANDARD METHOD OF LOAD TESTING REFRACTORY BRICK AT HIGH TEMPERATURES LONG-TIME
  • ASTM C547 : EN-Standard Specification for Mineral Fiber Pipe Insulation
  • ASTM C549 : EN-Standard Specification for Perlite Loose Fill Insulation
  • ASTM C55 : EN-Standard Specification for Concrete Brick
  • ASTM C55 REV A : EN-STANDARD-SPECIFICATION FOR CONCRETE BUILDING BRICK
  • ASTM C550 : EN-Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
  • ASTM C551 : EN-Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
  • ASTM C552 : EN-STANDARD SPECIFICATION FOR CELLULAR GLASS THERMAL INSULATION
  • ASTM C553 : EN-Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
  • ASTM C554 : EN-Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
  • ASTM C556 : EN-STANDARD TEST METHOD FOR RESISTANCE OF OVERGLAZE DECORATIONS TO ATTACK BY DETERGENTS
  • ASTM C557 : EN-Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
  • ASTM C557 REV A : EN-Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
  • ASTM C559 : EN-STANDARD TEST METHOD FOR BULK DENSITY BY PHYSICAL MEASUREMENT OF MANUFACTURED CARBON AND GRAPHITE ARTICLES
  • ASTM C56 : EN-Standard Specification for Structural Clay Non-Load-Bearing Tile
  • ASTM C560 : EN-STANDARD METHODS FOR CHEMICAL ANALYSIS OF GRAPHITE (R 1982) (E1-1984)
  • ASTM C561 : EN-Standard Test Method for Ash in a Graphite Sample
  • ASTM C562 : EN-Standard Test Method for Moisture in a Graphite Sample
  • ASTM C563 : EN-Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength
  • ASTM C564 : EN-STANDARD SPECIFICATION FOR RUBBER GASKETS FOR CAST IRON SOIL PIPE AND FITTINGS
  • ASTM C564 REV A : EN-Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
  • ASTM C565 : EN-Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
  • ASTM C566 : EN-STANDARD TEST METHOD FOR TOTAL MOISTURE CONTENT OF AGGREGATE BY DRYING
  • ASTM C567 : EN-STANDARD TEST METHOD FOR UNIT WEIGHT OF STRUCTURAL LIGHTWEIGHT CONCRETE
  • ASTM C567 REV A : EN-Standard Test Method for Determining Density of Structural Lightweight Concrete
  • ASTM C568 : EN-STANDARD SPECIFICATION FOR LIMESTONE BUILDING STONE (R 1985)
  • ASTM C568 REV A : EN-Standard Specification for Limestone Dimension Stone
  • ASTM C569 : EN-STANDARD TEST METHOD FOR INDENTATION HARDNESS OF PREFORMED THERMAL INSULATIONS
  • ASTM C57 : EN-STANDARD SPECIFICATION FOR STRUCTURAL CLAY FLOOR TILE
  • ASTM C570 : EN-Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction
  • ASTM C571 : EN-Standard Methods for Chemical Analysis of Carbon and Carbon-Ceramic Refractories
  • ASTM C572 : EN-Standard Methods for Chemical Analysis of Chrome-Containing Refractories and Chrome Ore
  • ASTM C573 : EN-Standard Methods for Chemical Analysis of Fireclay and High-Alumina Refractories
  • ASTM C574 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF MAGNESITE AND DOLOMITE REFRACTORIES
  • ASTM C575 : EN-Standard Methods for Chemical Analysis of Silica Refractories
  • ASTM C576 : EN-Standard Methods for Chemical Analysis of Zircon Refractories
  • ASTM C577 : EN-STANDARD TEST METHOD FOR PERMEABILITY OF REFRACTORIES
  • ASTM C578 : EN-Standard Specification for Rigid Cellular Polystyrene Thermal Insulation
  • ASTM C578 REV A : EN-Standard Specification for Rigid Cellular Polystyrene Thermal Insulation
  • ASTM C578 REV B : EN-Standard Specification for Rigid Cellular Polystyrene Thermal Insulation
  • ASTM C579 : EN-Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars Grouts Monolithic Surfacings and Polymer Concretes
  • ASTM C580 : EN-Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars Grouts Monolithic Surfacings and Polymer Concretes
  • ASTM C581 : EN-Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
  • ASTM C582 : EN-Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
  • ASTM C583 : EN-Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
  • ASTM C584 : EN-Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
  • ASTM C585 : EN-Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
  • ASTM C586 : EN-Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method)
  • ASTM C587 : EN-Standard Specification for Gypsum Veneer Plaster
  • ASTM C588 : EN-STANDARD SPECIFICATION FOR GYPSUM BASE FOR VENEER PLASTERS
  • ASTM C588 REV A : EN-Standard Specification for Gypsum Base for Veneer Plasters
  • ASTM C588/C588M : EN-Standard Specification for Gypsum Base for Veneer Plasters
  • ASTM C59 : EN-Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
  • ASTM C59/C59M : EN-Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
  • ASTM C590 : EN-STANDARD TEST METHOD FOR ACTION ON SUBSTRATES BY COATINGS ADHESIVES AND JOINT SEALANTS USED ON OR WITH THERMAL INSULATIONS
  • ASTM C591 : EN-Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
  • ASTM C591 REV A : EN-Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
  • ASTM C592 : EN-Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592 REV A : EN-Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C593 : EN-Standard Specification for Fly Ash and Other Pozzolans for Use with Lime for Soil Stabilization
  • ASTM C595 : EN-Standard Specification for Blended Hydraulic Cements
  • ASTM C595 REV A : EN-Standard Specification for Blended Hydraulic Cements
  • ASTM C595/C595M : EN-Standard Specification for Blended Hydraulic Cements
  • ASTM C595M : EN-Standard Specification for Blended Hydraulic Cements (Metric)
  • ASTM C595M REV A : EN-Standard Specification for Blended Hydraulic Cements (Metric)
  • ASTM C595M REV B : EN-STANDARD SPECIFICATION FOR BLENDED HYDRAULIC CEMENTS
  • ASTM C596 : EN-Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
  • ASTM C597 : EN-Standard Test Method for Pulse Velocity Through Concrete
  • ASTM C598 : EN-Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
  • ASTM C599 : EN-STANDARD SPECIFICATION FOR PROCESS GLASS PIPE AND FITTINGS (R 1984) (E1-1984)
  • ASTM C600 : EN-Standard Method of Thermal Shock Test on Glass Pipe
  • ASTM C601 : EN-Standard Test Method for Pressure Test on Glass Pipe
  • ASTM C602 : EN-STANDARD SPECIFICATION FOR AGRICULTURAL LIMING MATERIALS
  • ASTM C602 REV A : EN-Standard Specification for Agricultural Liming Materials
  • ASTM C603 : EN-STANDARD TEST METHOD FOR EXTRUSION RATE AND APPLICATION LIFE OF ELASTOMERIC SEALANTS
  • ASTM C604 : EN-STANDARD TEST METHOD FOR TRUE SPECIFIC GRAVITY OF REFRACTORY MATERIALS BY GAS-COMPARISON PYCNOMETER
  • ASTM C605 : EN-STANDARD TEST METHOD FOR REHEAT CHANGE OF FIRECLAY NOZZLES AND SLEEVES
  • ASTM C606 : EN-STANDARD TEST METHOD FOR LAP-JOINT STRENGTH OF REFRACTORY MORTAR AT ELEVATED TEMPERATURES
  • ASTM C607 : EN-STANDARD PRACTICE FOR COKING LARGE SHAPES OF CARBON-BEARING MATERIAL
  • ASTM C608 : EN-STANDARD TEST METHOD FOR BRITTLE RING TENSILE STRENGTH OF CHEMICALLY SETTING SILICATE AND SILICA CHEMICAL-RESISTANT MORTARS
  • ASTM C609 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF SMALL COLOR DIFFERENCES BETWEEN CERAMIC WALL OR FLOOR TILE
  • ASTM C61 : EN-STANDARD SPECIFICATION FOR GYPSUM KEENE´S CEMENT (R 1981)
  • ASTM C61/C61M : EN-Standard Specification for Gypsum Keene´s Cement
  • ASTM C610 : EN-Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
  • ASTM C611 : EN-Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
  • ASTM C612 : EN-Standard Specification for Mineral Fiber Block and Board Thermal Insulation
  • ASTM C612 REV A : EN-Standard Specification for Mineral Fiber Block and Board Thermal Insulation
  • ASTM C613 : EN-Standard Test Method for Resin Content of Carbon and Graphite Prepregs by Solvent Extraction
  • ASTM C613/C613M : EN-Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
  • ASTM C614 : EN-Standard Test Method for Alkali Resistance of Porcelain Enamels
  • ASTM C615 : EN-Standard Specification for Granite Dimension Stone
  • ASTM C616 : EN-Standard Specification for Quartz-Based Dimension Stone
  • ASTM C617 : EN-Standard Practice for Capping Cylindrical Concrete Specimens
  • ASTM C617 REV A : EN-Standard Practice for Capping Cylindrical Concrete Specimens
  • ASTM C617 REV B : EN-STANDARD PRACTICE FOR CAPPING CYLINDRICAL CONCRETE SPECIMENS
  • ASTM C618 : EN-Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  • ASTM C618 REV A : EN-STANDARD SPECIFICATION FOR COAL FLY ASH AND RAW OR CALCINED NATURAL POZZOLAN FOR USE AS A MINERAL ADMIXTURE IN PORTLAND CEMENT CONCRETE
  • ASTM C618 REV B : EN-STANDARD SPECIFICATION FOR FLY ASH AND RAW OR CALCINED NATURAL POZZOLAN FOR USE AS A MINERAL ADMIXTURE IN PORTLAND CEMENT CONCRETE
  • ASTM C62 : EN-STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C62 REV A : EN-STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE) (AASHTO NO. M 114)
  • ASTM C62 REV B : EN-STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C62 REV C : EN-STANDARD SPECIFICATION FOR BUILDING BRICK (SOLID MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C620 : EN-Standard Test Method for Hydration Resistance of Pitch-Bearing Basic Refractory Brick
  • ASTM C621 : EN-Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
  • ASTM C622 : EN-Standard Test Method for Corrosion Resistance of Refractories to Molten Glass Using the Basin Furnace
  • ASTM C623 : EN-STANDARD TEST METHOD FOR YOUNG’S MODULUS SHEAR MODULUS AND POISSON’S RATIO FOR GLASS AND GLASS-CERAMICS BY RESONANCE (R 1989)
  • ASTM C625 : EN-STANDARD PRACTICE FOR REPORTING IRRADIATION RESULTS ON GRAPHITE
  • ASTM C626 : EN-STANDARD METHODS FOR ESTIMATING THE THERMAL NEUTRON ABSORPTION CROSS SECTION OF NUCLEAR GRAPHITE
  • ASTM C627 : EN-Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
  • ASTM C629 : EN-Standard Specification for Slate Dimension Stone
  • ASTM C630 : EN-STANDARD SPECIFICATION FOR WATER-RESISTANT GYPSUM BACKING BOARD
  • ASTM C630/C630M : EN-Standard Specification for Water-Resistant Gypsum Backing Board
  • ASTM C630/C630M REV A : EN-Standard Specification for Water-Resistant Gypsum Backing Board
  • ASTM C631 : EN-STANDARD SPECIFICATION FOR BONDING COMPOUNDS FOR INTERIOR PLASTERING
  • ASTM C631 REV A : EN-Standard Specification for Bonding Compounds for Interior Gypsum Plastering
  • ASTM C632 : EN-STANDARD TEST METHOD FOR REBOILING TENDENCY OF SHEET STEEL FOR PORCELAIN ENAMELING (R 1980) (E1-1980)
  • ASTM C633 : EN-Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
  • ASTM C634 : EN-Standard Terminology Relating to Environmental Acoustics
  • ASTM C634 REV A : EN-Standard Terminology Relating to Building and Environmental Acoustics
  • ASTM C634 REV B : EN-Standard Terminology Relating to Environmental Acoustics
  • ASTM C635 : EN-STANDARD SPECIFICATION FOR METAL SUSPENSION SYSTEMS FOR ACOUSTICAL TILE AND LAY IN PANEL CEILINGS
  • ASTM C635/C635M : EN-Standard Specification for the Manufacture Performance and Testing of Metal Suspension Systems or Acoustical Tile and Lay-in Panel Ceilings
  • ASTM C636 : EN-STANDARD PRACTICE FOR INSTALLATION OF METAL CEILING SUSPENSION SYSTEMS FOR ACOUSTICAL TILE AND LAY-IN PANELS
  • ASTM C636/C636M : EN-Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
  • ASTM C637 : EN-Standard Specification for Aggregates for Radiation-Shielding Concrete
  • ASTM C637 REV A : EN-Standard Specification for S Aggregates for Radiation-Shielding Concrete
  • ASTM C638 : EN-STANDARD DESCRIPTIVE NOMENCLATURE OF CONSTITUENTS OF AGGREGATES FOR RADIATION-SHIELDING CONCRETE (R 1990)
  • ASTM C639 : EN-Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
  • ASTM C64 : EN-REFRACTORIES FOR INCINERATORS AND BOILERS
  • ASTM C640 : EN-STANDARD SPECIFICATION FOR CORKBOARD AND CORK PIPE THERMAL INSULATION
  • ASTM C641 : EN-Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
  • ASTM C642 : EN-Standard Test Method for Specific Gravity Absorption and Voids in Hardened Concrete
  • ASTM C645 : EN-Standard Specification for Nonstructural Steel Framing Members
  • ASTM C645 REV A : EN-Standard Specification for Nonstructural Steel Framing Members
  • ASTM C645 REV B : EN-Standard Specification for Nonstructural Steel Framing Members
  • ASTM C647 : EN-Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
  • ASTM C647 REV A : EN-STANDARD GUIDE TO PROPERTIES AND TESTS OF MASTICS AND COATING FINISHES FOR THERMAL INSULATION
  • ASTM C648 : EN-Standard Test Method for Breaking Strength of Ceramic Tile
  • ASTM C650 : EN-Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
  • ASTM C651 : EN-Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
  • ASTM C652 : EN-STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C652 REV A : EN-Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
  • ASTM C652 REV B : EN-STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C652 REV C : EN-STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C652 REV D : EN-STANDARD SPECIFICATION FOR HOLLOW BRICK (HOLLOW MASONRY UNITS MADE FROM CLAY OR SHALE)
  • ASTM C653 : EN-STANDARD GUIDE FOR DETERMINATION OF THE THERMAL RESISTANCE OF LOW-DENSITY BLANKET- TYPE MINERAL FIBER INSULATION
  • ASTM C654 : EN-Standard Specification for Porous Concrete Pipe
  • ASTM C654 REV A : EN-Standard Specification for Porous Concrete Pipe
  • ASTM C654M : EN-Standard Specification for Porous Concrete Pipe (Metric)
  • ASTM C654M REV A : EN-Standard Specification for Porous Concrete Pipe [Metric]
  • ASTM C655 : EN-Standard Specification for Reinforced Concrete D-Load Culvert Storm Drain and Sewer Pipe
  • ASTM C655 REV A : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT STORM DRAIN AND SEWER PIPE (AASHTO NO. M 242-79) (E1-1987)
  • ASTM C655M : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT STORM DRAIN AND SEWER PIPE (METRIC) (AASHTO M242M)
  • ASTM C655M REV A : EN-Standard Specification for Reinforced Concrete D-Load Culvert Storm Drain and Sewer Pipe (Metric)
  • ASTM C656 : EN-STANDARD SPECIFICATION FOR STRUCTURAL INSULATING BOARD CALCIUM SILICATE
  • ASTM C656 REV A : EN-STANDARD SPECIFICATION FOR STRUCTURAL INSULATING BOARD CALCIUM SILICATE
  • ASTM C657 : EN-STANDARD TEST METHOD FOR D-C VOLUME RESISTIVITY OF GLASS
  • ASTM C658 : EN-STANDARD SPECIFICATION FOR CHEMICAL-RESISTANT RESIN GROUTS FOR BRICK OR TILE
  • ASTM C659 : EN-STANDARD SPECIFICATION FOR ASBESTOS-CEMENT PLASTIC-FOAM CORE INSULATING PANELS (R 1983)
  • ASTM C660 : EN-Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
  • ASTM C661 : EN-STANDARD TEST METHOD FOR INDENTATION HARDNESS OF ELASTOMERIC-TYPE SEALANTS BY MEANS OF A DUROMETER
  • ASTM C662 : EN-Standard Specification for Impervious Graphite Pipe and Threading
  • ASTM C663 : EN-STANDARD SPECIFICATION FOR ASBESTOS-CEMENT STORM DRAIN PIPE
  • ASTM C664 : EN-Standard Test Methods for Thickness of Diffusion Coating
  • ASTM C665 : EN-STANDARD SPECIFICATION FOR MINERAL-FIBER BLANKET THERMAL INSULATION FOR LIGHT FRAME CONSTRUCTION AND MANUFACTURED HOUSING
  • ASTM C666 : EN-Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (AASHTO T161)
  • ASTM C666/C666M : EN-Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
  • ASTM C667 : EN-Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures Above Ambient Air
  • ASTM C668 : EN-STANDARD SPECIFICATION FOR ASBESTOS-CEMENT TRANSMISSION PIPE
  • ASTM C669 : EN-STANDARD SPECIFICATION FOR GLAZING COMPOUNDS FOR BACK BEDDING AND FACE GLAZING OF METAL SASH (R 1989)
  • ASTM C67 : EN-STANDARD METHODS OF SAMPLING AND TESTING BRICK AND STRUCTURAL CLAY TILE
  • ASTM C67 REV A : EN-Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile-AASHTO No.: T 32-70
  • ASTM C67 REV B : EN-Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile-AASHTO No.: T 32-70
  • ASTM C67 REV C : EN-Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile-AASHTO No.: T 32-70
  • ASTM C670 : EN-STANDARD PRACTICE FOR PREPARING PRECISION AND BIAS STATEMENTS FOR TEST METHODS FOR CONSTRUCTION MATERIALS
  • ASTM C670 REV A : EN-STANDARD PRACTICE FOR PREPARING PRECISION AND BIAS STATEMENTS FOR TEST METHODS FOR CONSTRUCTION MATERIALS
  • ASTM C671 : EN-STANDARD TEST METHOD FOR CRITICAL DILATION OF CONCRETE SPECIMENS SUBJECTED TO FREEZING
  • ASTM C672 : EN-STANDARD TEST METHOD FOR SCALING RESISTANCE OF CONCRETE SURFACES EXPOSED TO DEICING CHEMICALS
  • ASTM C672 REV A : EN-STANDARD TEST METHOD FOR SCALING RESISTANCE OF CONCRETE SURFACES EXPOSED TO DEICING CHEMICALS
  • ASTM C672/C672M : EN-Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
  • ASTM C673 : EN-Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
  • ASTM C674 : EN-Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
  • ASTM C675 : EN-Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
  • ASTM C676 : EN-Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
  • ASTM C677 : EN-STANDARD PRACTICE FOR USE OF A POLYETHYLENE TEREPHTHALATE REFERENCE FILM FOR THE MEASUREMENT OF THE TIME-AVERAGED VAPOR PRESSURE IN A CONTROLLED HUMIDITY SPACE
  • ASTM C678 : EN-Standard Test Method for Determination of Particle Size Distribution of Alumina or Quartz Using Centrifugal Sedimentation
  • ASTM C679 : EN-Standard Test Method for Tack-Free Time of Elastomeric Sealants
  • ASTM C680 : EN-Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat Cylindrical and Spherical Systems by Use of Computer Programs
  • ASTM C680 REV A : EN-Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat Cylindrical and Spherical Systems by Use of Computer Programs
  • ASTM C681 : EN-STANDARD TEST METHOD FOR VOLATILITY OF OIL- AND RESIN-BASED KNIFE- GRADE CHANNEL GLAZING COMPOUNDS (R 1989) (E1-1989)
  • ASTM C682 : EN-STANDARD RECOMMENDED PRACTICE FOR EVALUATION OF FROST RESISTANCE OF COARSE AGGREGATES IN AIR-ENTRAINED CONCRETE BY CRITICAL DILATION PROCEDURES (R 1980) (E1-1981)
  • ASTM C684 : EN-Standard Test Method for Making Accelerated Curing and Testing Concrete Compression Test Specimens
  • ASTM C685 : EN-STANDARD SPECIFICATION FOR CONCRETE MADE BY VOLUMETRIC BATCHING AND CONTINUOUS MIXING
  • ASTM C685 REV A : EN-STANDARD SPECIFICATION FOR CONCRETE MADE BY VOLUMETRIC BATCHING AND CONTINUOUS MIXING
  • ASTM C685 REV B : EN-STANDARD SPECIFICATION FOR CONCRETE MADE BY VOLUMETRIC BATCHING AND CONTINUOUS MIXING
  • ASTM C685/C685M : EN-Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
  • ASTM C685/C685M REV A : EN-Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
  • ASTM C686 : EN-Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
  • ASTM C687 : EN-STANDARD PRACTICE FOR DETERMINATION OF THE THERMAL RESISTANCE OF LOOSE-FILL BUILDING INSULATION
  • ASTM C688 : EN-Standard Specification for Functional Additions for Use in Hydraulic Cements
  • ASTM C688 REV A : EN-STANDARD SPECIFICATION FOR FUNCTIONAL ADDITIONS FOR USE IN HYDRAULIC CEMENTS
  • ASTM C689 : EN-STANDARD TEST METHOD FOR MODULUS OF RUPTURE OF UNFIRED CLAYS (R 1985) (E1-1985)
  • ASTM C689 REV A : EN-Standard Test Method for Modulus of Rupture of Unfired Clays
  • ASTM C690 : EN-Standard Test Method for Particle Size Distribution of Alumina or Quartz by Electric Sensing Zone Technique
  • ASTM C691 : EN-STANDARD TEST METHOD FOR STEADY-STATE THERMAL TRANSMISSION PROPERTIES OF NONHOMOGENEOUS PIPE INSULATION INSTALLED HORIZONTALLY
  • ASTM C692 : EN-Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM C692 REV A : EN-Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM C693 : EN-Standard Test Method for Density of Glass by Buoyancy
  • ASTM C694 : EN-STANDARD TEST METHOD FOR WEIGHT LOSS OF SHEET STEEL DURING IMMERSION IN SULFURIC ACID SOLUTION
  • ASTM C694 REV A : EN-Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
  • ASTM C695 : EN-STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF CARBON AND GRAPHITE (R 1989)
  • ASTM C696 : EN-STANDARD METHODS FOR CHEMICAL MASS SPECTROMETRIC AND SPECTROCHEMICAL ANALYSIS OF NUCLEAR-GRADE URANIUM DIOXIDE POWDERS AND PELLETS
  • ASTM C697 : EN-Standard Test Methods for Chemical Mass Spectrometric and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • ASTM C697 REV A : EN-STANDARD METHODS FOR CHEMICAL MASS SPECTROMETRIC AND SPECTROCHEMICAL ANALYSIS OF NUCLEAR- GRADE PLUTONIUM DIOXIDE POWDERS AND PELLETS
  • ASTM C698 : EN-Standard Test Methods for Chemical Mass Spectrometric and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U Pu)O2)
  • ASTM C698 REV A : EN-STANDARD METHODS FOR CHEMICAL MASS SPECTROMETRIC AND SPECTROCHEMICAL ANALYSIS OF NUCLEAR-GRADE MIXED OXIDES ((U PU)O2)
  • ASTM C699 : EN-STANDARD METHODS FOR CHEMICAL MASS SPECTROMETRIC AND SPECTROCHEMICAL ANALYSIS OF AND PHYSICAL TESTS ON BERYLLIUM OXIDE POWDER
  • ASTM C70 : EN-Standard Test Method for Surface Moisture in Fine Aggregate-AASHTO No.: T142
  • ASTM C700 : EN-STANDARD SPECIFICATION FOR VITRIFIED CLAY PIPE EXTRA STRENGTH STANDARD STRENGTH AND PERFORATED
  • ASTM C700 REV A : EN-STANDARD SPECIFICATION FOR VITRIFIED CLAY PIPE EXTRA STRENGTH STANDARD STRENGTH AND PERFORATED (AASHTO NO. M 65) (E1-1989)
  • ASTM C702 : EN-STANDARD METHODS FOR REDUCING FIELD SAMPLES OF AGGREGATE TO TESTING SIZE
  • ASTM C703 : EN-Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
  • ASTM C704 : EN-Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
  • ASTM C704 ADJUNCT :
  • ASTM C704 REV A : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF REFRACTORY MATERIALS AT ROOM TEMPERATURE
  • ASTM C704/C704M : EN-Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
  • ASTM C705 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF ZIRCONIA REFRACTORIES
  • ASTM C706 : EN-STANDARD SPECIFICATION FOR LIMESTONE FOR ANIMAL FEED USE (R 1990) (E1-1990)
  • ASTM C708 : EN-Standard Specification for Nuclear-Grade Beryllium Oxide Powder
  • ASTM C709 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO MANUFACTURED CARBON AND GRAPHITE
  • ASTM C709 REV A : EN-Standard Terminology Relating to Manufactured Carbon and Graphite
  • ASTM C709 REV B : EN-Standard Terminology Relating to Manufactured Carbon and Graphite
  • ASTM C71 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO REFRACTORIES
  • ASTM C71 REV A : EN-Standard Terminology Relating to Refractories
  • ASTM C711 : EN-Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part Elastomeric Solvent-Release Type Sealants
  • ASTM C712 : EN-STANDARD TEST METHOD FOR BUBBLING OF ONE-PART ELASTOMERIC SOLVENT- RELEASE TYPE SEALANTS (R 1983) (E1-1983)
  • ASTM C713 : EN-STANDARD TEST METHOD FOR SLUMP OF AN OIL-BASE KNIFE-GRADE CHANNEL GLAZING COMPOUND (R 1989)
  • ASTM C714 : EN-Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
  • ASTM C715 : EN-STANDARD TEST METHOD FOR NICKEL ON STEEL FOR PORCELAIN ENAMELING BY PHOTOMETRIC ANALYSIS (R 1983)
  • ASTM C716 : EN-Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
  • ASTM C717 : EN-STANDARD TERMINOLOGY OF BUILDING SEALS AND SEALANTS
  • ASTM C717 REV A : EN-Standard Terminology of Building Seals and Sealants
  • ASTM C717 REV B : EN-STANDARD TERMINOLOGY OF BUILDING SEALS AND SEALANTS
  • ASTM C717 REV C : EN-STANDARD TERMINOLOGY OF BUILDING SEALS AND SEALANTS
  • ASTM C717 REV D : EN-STANDARD DEFINITIONS OF TERMS RELATING TO BUILDING SEALS AND SEALANTS
  • ASTM C718 : EN-STANDARD TEST METHOD FOR ULTRAVIOLET (UV)-COLD BOX EXPOSURE OF ONE- PART ELASTOMERIC SOLVENT-RELEASE TYPE SEALANTS
  • ASTM C719 : EN-Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
  • ASTM C720 : EN-STANDARD SPECIFICATION FOR SPRAY-APPLIED FIBROUS THERMAL INSULATION FOR ELEVATED TEMPERATURE (R 1979) (E1-1985)
  • ASTM C721 : EN-Standard Test Method for Average Particle Size of Alumina and Silica Powders by Air Permeability
  • ASTM C722 : EN-Standard Specification for Chemical-Resistant Resin Monolithic Surfacings
  • ASTM C723 : EN-STANDARD PRACTICE FOR CHEMICAL-RESISTANT RESIN GROUTS FOR BRICK OR TILE
  • ASTM C724 : EN-Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
  • ASTM C725 : EN-Standard Specification for Semidense Mineral Fiber Siding
  • ASTM C726 : EN-STANDARD SPECIFICATION FOR MINERAL FIBER AND MINERAL FIBER RIGID CELLULAR POLYURETHANE COMPOSITE ROOF INSULATION BOARD (E1-1984)
  • ASTM C726 REV A : EN-Standard Specification for Mineral Fiber Roof Insulation Board
  • ASTM C727 : EN-STANDARD RECOMMENDED PRACTICE FOR USE OF REFLECTIVE INSULATION IN BUILDING CONSTRUCTIONS (R 1978)
  • ASTM C728 : EN-Standard Specification for Perlite Thermal Insulation Board
  • ASTM C728 REV A : EN-STANDARD SPECIFICATION FOR PERLITE THERMAL INSULATION BOARD
  • ASTM C729 : EN-Standard Test Method for Density of Glass by the Sink-Float Comparator
  • ASTM C73 : EN-Standard Specification for Calcium Silicate Face Brick (Sand-Lime Brick)
  • ASTM C73 REV A : EN-STANDARD SPECIFICATION FOR CALCIUM SILICATE FACE BRICK (SAND-LIME BRICK)
  • ASTM C730 : EN-Standard Test Method for Knoop Indentation Hardness of Glass
  • ASTM C731 : EN-STANDARD TEST METHOD FOR EXTRUDABILITY AFTER PACKAGE AGING OF LATEX SEALANTS
  • ASTM C731 REV A : EN-Standard Test Method for Extrudability After Package Aging of Latex Sealants
  • ASTM C732 : EN-STANDARD TEST METHOD FOR AGING EFFECTS OF ARTIFICIAL WEATHERING ON LATEX SEALANTS (R 1987) (E1-1987)
  • ASTM C733 : EN-STANDARD TEST METHOD FOR VOLUME SHRINKAGE OF LATEX SEALANTS
  • ASTM C734 : EN-Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
  • ASTM C735 : EN-Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
  • ASTM C736 : EN-Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
  • ASTM C737 : EN-Standard Specification for Limestone for Dusting of Coal Mines
  • ASTM C738 : EN-Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
  • ASTM C739 : EN-STANDARD SPECIFICATION FOR CELLULOSIC FIBER (WOOD-BASE) LOOSE-FILL THERMAL INSULATION (E1-3/1987;E2-6/1987)
  • ASTM C739 REV B : EN-Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
  • ASTM C740 : EN-Standard Practice for Evacuated Reflective Insulation in Cryogenic Service
  • ASTM C740/C740M : EN-Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
  • ASTM C741 : EN-Standard Test Method for Accelerated Aging of Wood Sash Face Glazing Compound
  • ASTM C742 : EN-Standard Test Method for Degree of Set for Wood Sash Glazing Compound
  • ASTM C743 : EN-Standard Test Method for Continuity of Porcelain Enamel Coatings
  • ASTM C744 : EN-Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
  • ASTM C744 REV A : EN-STANDARD SPECIFICATION FOR PREFACED CONCRETE AND CALCIUM SILICATE MASONRY UNITS
  • ASTM C744 REV B : EN-STANDARD SPECIFICATION FOR PREFACED CONCRETE AND CALCIUM SILICATE MASONRY UNITS
  • ASTM C745 : EN-Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter
  • ASTM C746 : EN-STANDARD SPECIFICATION FOR CORRUGATED ASBESTOS -CEMENT SHEETS FOR BULKHEADING (R 1984)
  • ASTM C747 : EN-Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
  • ASTM C748 : EN-Standard Test Method for Rockwell Hardness of Graphite Materials
  • ASTM C749 : EN-STANDARD TEST METHOD FOR TENSILE STRESS-STRAIN OF CARBON AND GRAPHITE
  • ASTM C75 : EN-Standard Specification for Reinforced Concrete Sewer Pipe
  • ASTM C750 : EN-STANDARD SPECIFICATION FOR NUCLEAR-GRADE BORON CARBIDE POWDER
  • ASTM C76 REV A : EN-Standard Specification for Reinforced Concrete Culvert Storm Drain and Sewer Pipe
  • ASTM C76 REV B : EN-Standard Specification for Reinforced Concrete Culvert Storm Drain and Sewer Pipe
  • ASTM C760 : EN-Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys
  • ASTM C761 : EN-STANDARD METHODS FOR CHEMICAL MASS SPECTROMETRIC SPECTROCHEMICAL NUCLEAR AND RADIOCHEMICAL ANALYSIS OF URANIUM HEXAFLOURIDE
  • ASTM C762 : EN-STANDARD PRACTICE FOR APPLICATION OF SPRAY- APPLIED FIBROUS THERMAL INSULATION (R 1980)
  • ASTM C764 : EN-Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
  • ASTM C764 REV A : EN-Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
  • ASTM C765 : EN-Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
  • ASTM C767 : EN-Standard Test Method for Thermal Conductivity of Carbon Refractories
  • ASTM C768 : EN-Standard Practice for Drip Slag Testing Refractory Brick at High Temperature
  • ASTM C769 : EN-Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Young’s Modulus
  • ASTM C76M : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE CULVERT STORM DRAIN AND SEWER PIPE (METRIC) (AASHTO NO. M 170M-81)
  • ASTM C76M REV A : EN-STANDARD SPECIFICATION FOR REINFORCED CONCRETE CULVERT STORM DRAIN AND SEWER PIPE (METRIC)
  • ASTM C76M REV B : EN-Standard Specification for Reinforced Concrete Culvert Storm Drain and Sewer Pipe [Metric]
  • ASTM C770 : EN-Standard Test Method for Measurement of Glass Stress-Optical Coefficient
  • ASTM C771 : EN-Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
  • ASTM C772 : EN-STANDARD TEST METHOD FOR OIL MIGRATION OR PLASTICIZER BLEED-OUT OF PREFORMED SEALING TAPES (R 1985)
  • ASTM C773 : EN-STANDARD TEST METHOD FOR COMPRESSIVE (CRUSHING) STRENGTH OF FIRED WHITEWARE MATERIALS
  • ASTM C774 : EN-Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
  • ASTM C775 : EN-Standard Method for Particle-Size Analysis of Whiteware Clays
  • ASTM C776 : EN-Standard Specification for Sintered Uranium Dioxide Pellets
  • ASTM C777 : EN-Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
  • ASTM C778 : EN-Standard Specification for Standard Sand
  • ASTM C778 REV A : EN-Standard Specification for Standard Sand
  • ASTM C779 : EN-Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
  • ASTM C779 REV A : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF HORIZONTAL CONCRETE SURFACES (E1-1990)
  • ASTM C779/C779M : EN-Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
  • ASTM C78 : EN-Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  • ASTM C780 : EN-Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • ASTM C780 REV A : EN-Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • ASTM C781 : EN-Standard Practice for Testing Graphite and Boronated Graphite Components for High- Temperature Gas-Cooled Nuclear Reactors
  • ASTM C782 : EN-SOFTNESS OF PREFORMED SEALING TAPES TEST METHOD FOR (R 1980)
  • ASTM C783 : EN-Standard Practice for Core Sampling of Graphite Electrodes
  • ASTM C784 : EN-STANDARD SPECIFICATION FOR NUCLEAR-GRADE ALUMINUM OXIDE-BORON CARBIDE COMPOSITE PELLETS
  • ASTM C785 : EN-STANDARD SPECIFICATION FOR NUCLEAR-GRADE ALUMINUM OXIDE PELLETS
  • ASTM C786 : EN-STANDARD TEST METHOD FOR FINENESS OF HYDRAULIC CEMENT AND RAW MATERIALS BY THE 300-MICROMETER (NO. 50) 150-MICROMETER (NO. 100) AND 75- MICROMETER (NO. 200) SIEVES BY WET METHODS
  • ASTM C786/C786M : EN-Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-mue m (No. 50) 150-mue m (No. 100) and 75-mue m (No. 200) Sieves by Wet Methods
  • ASTM C787 : EN-Standard Specification for Uranium Hexafluoride for Enrichment
  • ASTM C788 : EN-STANDARD SPECIFICATION FOR NUCLEAR-GRADE URANYL NITRATE SOLUTION
  • ASTM C789 : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS
  • ASTM C789 REV A : EN-Standard Specification for Precast Reinforced Concrete Box Sections for Culverts Storm Drains and Sewers
  • ASTM C789 REV B : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS (AASHTO NO. M 259)
  • ASTM C789M : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS (METRIC) (AASHTO NO. M 259M-81) (E2-1990)
  • ASTM C789M REV A : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS (METRIC) (AASHTO NO. M 259M)
  • ASTM C79 : EN-Standard Specification for Gypsum Sheathing Board
  • ASTM C79 REV A : EN-STANDARD SPECIFICATION FOR GYPSUM SHEATHING BOARD
  • ASTM C79/C79M : EN-Standard Specification for Treated Core and Nontreated Core Gypsum Sheathing Board
  • ASTM C79/C79M REV A : EN-Standard Specification for Gypsum Sheathing Board
  • ASTM C790 : EN-Standard Guide for Use of Latex Sealants
  • ASTM C791 : EN-Standard Test Methods for Chemical Mass Spectrometric and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • ASTM C792 : EN-Standard Test Method for Effects of Heat Aging on Weight Loss Cracking and Chalking of Elastomeric Sealants
  • ASTM C793 : EN-Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
  • ASTM C794 : EN-Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
  • ASTM C795 : EN-STANDARD SPECIFICATION FOR WICKING-TYPE THERMAL INSULATION FOR USE OVER AUSTENITIC STAINLESS STEEL
  • ASTM C796 : EN-STANDARD METHOD OF TESTING FOAMING AGENTS FOR USE IN PRODUCING CELLULAR CONCRETE USING PREFORMED FOAM (R 1986)
  • ASTM C796 REV A : EN-Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  • ASTM C797 : EN-Standard Practices for Use of Oil- and Resin-Based Putty and Glazing Compounds
  • ASTM C798 : EN-STANDARD TEST METHOD FOR COLOR PERMANENCY OF GLAZED CERAMIC TILE
  • ASTM C799 : EN-Standard Test Methods for Chemical Mass Spectrometric Spectrochemical Nuclear and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
  • ASTM C800 : EN-STANDARD SPECIFICATION FOR GLASS FIBER BLANKET INSULATION (AIRCRAFT TYPE) (R 1980) (E1-1985)
  • ASTM C801 : EN-STANDARD PRACTICE FOR DETERMINING THE MECHANICAL PROPERTIES OF HARDENED CONCRETE UNDER TRIAXIAL LOADS (R 1986)
  • ASTM C802 : EN-Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
  • ASTM C802 REV A : EN-Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
  • ASTM C803 : EN-STANDARD TEST METHOD FOR PENETRATION RESISTANCE OF HARDENED CONCRETE (R 1989)
  • ASTM C803/C803M : EN-Standard Test Method for Penetration Resistance of Hardened Concrete
  • ASTM C805 : EN-Standard Test Method for Rebound Number of Hardened Concrete
  • ASTM C805/C805M : EN-Standard Test Method for Rebound Number of Hardened Concrete
  • ASTM C806 : EN-Standard Test Method for Restrained Expansion of Expansive Cement Mortar
  • ASTM C807 : EN-Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
  • ASTM C807 REV A : EN-Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
  • ASTM C808 : EN-Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials
  • ASTM C809 : EN-Standard Test Methods for Chemical Mass Spectrometric and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
  • ASTM C810 : EN-Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
  • ASTM C811 : EN-Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
  • ASTM C813 : EN-Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
  • ASTM C816 : EN-Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
  • ASTM C819 : EN-STANDARD TEST METHOD FOR SPECIFIC SURFACE AREA OF CARBON OR GRAPHITE
  • ASTM C821 : EN-Standard Specification for Lime for Use with Pozzolans
  • ASTM C822 : EN-Standard Terminology Relating to Concrete Pipe and Related Products
  • ASTM C822 REV A : EN-STANDARD DEFINITIONS OF TERMS RELATING TO CONCRETE PIPE AND RELATED PRODUCTS
  • ASTM C822 REV B : EN-Standard Terminology Relating to Concrete Pipe and Related Products
  • ASTM C823 : EN-Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
  • ASTM C823/C823M : EN-Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
  • ASTM C824 : EN-Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
  • ASTM C825 : EN-Standard Specification for Precast Concrete Barriers
  • ASTM C827 : EN-STANDARD TEST METHOD FOR CHANGE IN HEIGHT AT EARLY AGES OF CYLINDRICAL SPECIMENS FROM CEMENTITIOUS MIXTURES
  • ASTM C827 REV A : EN-Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures
  • ASTM C828 : EN-Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C829 : EN-Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
  • ASTM C830 : EN-Standard Test Methods for Apparent Porosity Liquid Absorption Apparent Specific Gravity and Bulk Density of Refractory Shapes by Vacuum Pressure
  • ASTM C831 : EN-STANDARD TEST METHODS FOR RESIDUAL CARBON APPARENT RESIDUAL CARBON AND APPARENT CARBON YIELD IN COKED CARBON-CONTAINING BRICK AND SHAPES
  • ASTM C832 : EN-Standard Test Method of Measuring the Thermal Expansion and Creep of Refractories Under Load
  • ASTM C833 : EN-STANDARD SPECIFICATION FOR SINTERED (URANIUM- PLUTONIUM) DIOXIDE PELLETS (R 1981) (E1-1980)
  • ASTM C833 REV A : EN-Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets
  • ASTM C834 : EN-Standard Specification for Latex Sealants
  • ASTM C835 : EN-STANDARD TEST METHOD FOR TOTAL HEMISPHERICAL EMITTANCE OF SURFACES FROM 20 TO 1400 DEGREES C (R 1988) (E1-1988)
  • ASTM C836 : EN-Standard Specification for High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
  • ASTM C836 REV A : EN-STANDARD SPECIFICATION FOR HIGH SOLIDS CONTENT COLD LIQUID-APPLIED ELASTOMERIC WATERPROOFING MEMBRANE FOR USE WITH SEPARATE WEARING COURSE
  • ASTM C836/C836M : EN-Standard Specification for High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
  • ASTM C837 : EN-Standard Test Method for Methylene Blue Index of Clay
  • ASTM C838 : EN-Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
  • ASTM C839 : EN-Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
  • ASTM C840 : EN-STANDARD SPECIFICATION FOR APPLICATION AND FINISHING OF GYPSUM BOARD
  • ASTM C840 REV A : EN-STANDARD SPECIFICATION FOR APPLICATION AND FINISHING OF GYPSUM BOARD
  • ASTM C841 : EN-Standard Specification for Installation of Interior Lathing and Furring
  • ASTM C842 : EN-Standard Specification for Application of Interior Gypsum Plaster
  • ASTM C842 REV A : EN-Standard Specification for Application of Interior Gypsum Plaster
  • ASTM C843 : EN-Standard Specification for Application of Gypsum Veneer Plaster
  • ASTM C844 : EN-Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
  • ASTM C844 REV A : EN-Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
  • ASTM C845 : EN-Standard Specification for Expansive Hydraulic Cement
  • ASTM C846 : EN-Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
  • ASTM C847 : EN-Standard Specification for Metal Lath
  • ASTM C848 : EN-Standard Test Method for Young-s Modulus Shear Modulus and Poisson-s Ratio For Ceramic Whitewares by Resonance
  • ASTM C849 : EN-STANDARD TEST METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES
  • ASTM C85 : EN-STANDARD TEST METHOD FOR CEMENT CONTENT OF HARDENED PORTLAND CEMENT CONCRETE (E2-1985) (R 1973)
  • ASTM C850 : EN-Standard Specification for PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS WITH LESS THAN 2 ft (0.6 m) OF COVER SUBJECTED TO HIGHWAY LOADINGS
  • ASTM C850 REV A : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS WITH LESS THAN 2 FT OF COVER SUBJECTED TO HIGHWAY LOADINGS (E1-1987)
  • ASTM C850M : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS WITH LESS THAN 0.6 M OF COVER SUBJECTED TO HIGHWAY LOADINGS (METRIC)
  • ASTM C850M REV A : EN-STANDARD SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS STORM DRAINS AND SEWERS WITH LESS THAN 0.6 M OF COVER SUBJECTED TO HIGHWAY LOADINGS (METRIC) (E1-1987)
  • ASTM C850M REV B : EN-Standard Specification for Precast Reinforced Concrete Box Sections for Culverts Storm Drains and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings (Metric)
  • ASTM C852 : EN-STANDARD GUIDE FOR DESIGN CRITERIA FOR PLUTONIUM GLOVEBOXES
  • ASTM C853 : EN-STANDARD TEST METHODS FOR NONDESTRUCTIVE ASSAY OF SPECIAL NUCLEAR MATERIALS CONTAINED IN SCRAP AND WASTE
  • ASTM C854 : EN-STANDARD TEST METHOD FOR RESISTANCE TO EXTERNAL LOADS ON METAL REFLECTIVE PIPE INSULATION
  • ASTM C856 : EN-STANDARD PRACTICE FOR PETROGRAPHIC EXAMINATION OF HARDENED CONCRETE (R 1988) (E1-1988)
  • ASTM C857 : EN-Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
  • ASTM C858 : EN-Standard Specification for Underground Precast Concrete Utility Structures
  • ASTM C859 : EN-STANDARD TERMINOLOGY RELATING TO NUCLEAR MATERIALS
  • ASTM C859 REV A : EN-STANDARD DEFINITIONS OF TERMS RELATING TO NUCLEAR MATERIALS (E1-1986)
  • ASTM C859 REV B : EN-Standard Terminology Relating to Nuclear Materials
  • ASTM C860 : EN-Standard Practice for Determining the Consistency of Refactory Castable Using the Ball-in-Hand Test
  • ASTM C861 : EN-STANDARD PRACTICE FOR DETERMINING METRIC DIMENSIONS OF STANDARD SERIES REFRACTORY BRICK AND SHAPES (R 1987)
  • ASTM C862 : EN-Standard Practice for Preparing Refractory Concrete Specimens by Casting
  • ASTM C863 : EN-Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
  • ASTM C864 : EN-Standard Specification for Dense Elastomeric Compression Seal Gaskets Setting Blocks and Spacers
  • ASTM C865 : EN-Standard Practice for Firing Refractory Concrete Specimens
  • ASTM C866 : EN-Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
  • ASTM C867 : EN-STANDARD TEST METHOD FOR SOLUBLE SULFATE IN CERAMIC WHITEWARE CLAYS (PHOTOMETRIC METHOD) (R 1988)
  • ASTM C868 : EN-Standard Test Method for Chemical Resistance of Protective Linings
  • ASTM C869 : EN-STANDARD SPECIFICATION FOR FOAMING AGENTS USED IN MAKING PREFORMED FOAM FOR CELLULAR CONCRETE (R 1986)
  • ASTM C87 : EN-Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C870 : EN-Standard Practice for Conditioning of Thermal Insulating Materials
  • ASTM C871 : EN-Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride Fluoride Silicate and Sodium Ions
  • ASTM C871 REV A : EN-Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride Fluoride Silicate and Sodium Ions
  • ASTM C872 : EN-Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
  • ASTM C873 : EN-Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
  • ASTM C873/C873M : EN-Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
  • ASTM C874 : EN-Standard Practice for Rotary Slag Testing of Refractory Materials
  • ASTM C875 : EN-STANDARD SPECIFICATION FOR ASBESTOS-CEMENT CONDUIT AND FITTINGS
  • ASTM C876 : EN-Standard Test Method for Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
  • ASTM C877 : EN-Standard Specification for External Sealing Bands for Concrete Pipe Manholes and Precast Box Sections
  • ASTM C877M : EN-STANDARD SPECIFICATION FOR EXTERNAL SEALING BANDS FOR NONCIRCULAR CONCRETE SEWER STORM DRAIN AND CULVERT PIPE (METRIC)
  • ASTM C878 : EN-STANDARD TEST METHOD FOR RESTRAINED EXPANSION OF SHRINKAGE – COMPENSATING CONCRETE
  • ASTM C878 REV A : EN-Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete-Withdrawn 2003
  • ASTM C878/C878M : EN-Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete Restrained Expansion of Shrinkage-Compensating Concrete1
  • ASTM C879 : EN-Standard Test Methods for Release Papers Used with Preformed Tape Sealants
  • ASTM C88 : EN-Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • ASTM C88 REV A : EN-Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • ASTM C880 : EN-Standard Test Method for Flexural Strength of Dimension Stone
  • ASTM C880/C880M : EN-Standard Test Method for Flexural Strength of Dimension Stone
  • ASTM C881 : EN-Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
  • ASTM C881/C881M : EN-Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
  • ASTM C882 : EN-STANDARD TEST METHOD FOR BOND STRENGTH OF EPOXY- RESIN SYSTEMS USED WITH CONCRETE (R 1983)
  • ASTM C882/C882M : EN-Standard Test Method for Bond Strength of Epoxy-Resin Systems Used with Concrete by Slant Shear
  • ASTM C883 : EN-STANDARD TEST METHOD FOR EFFECTIVE SHRINKAGE OF EPOXY-RESIN SYSTEMS USED WITH CONCRETE (R 1983) (E1-1982)
  • ASTM C884 : EN-STANDARD TEST METHOD FOR THERMAL COMPATIBILITY BETWEEN CONCRETE AND AN EPOXY-RESIN OVERLAY (R 1983) (E1-1982)
  • ASTM C884/C884M : EN-Standard Test Method for Thermal Compatibility between Concrete and an Epoxy-Resin Overlay
  • ASTM C885 : EN-Standard Test Method for Young-s Modulus of Refractory Shapes by Sonic Resonance
  • ASTM C886 : EN-STANDARD METHOD FOR SCLEROSCOPE HARDNESS TESTING OF FINE- GRAINED CARBON AND GRAPHITE MATERIALS
  • ASTM C887 : EN-Standard Specification for Packaged Dry Combined Materials for Surface Bonding Mortar
  • ASTM C887 REV A : EN-Standard Specification for Packaged Dry Combined Materials for Surface Bonding Mortar
  • ASTM C888 : EN-Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • ASTM C889 : EN-Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • ASTM C890 : EN-Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
  • ASTM C891 : EN-Standard Practice for Installation of Underground Precast Concrete Utility Structures
  • ASTM C892 : EN-STANDARD SPECIFICATION FOR HIGH-TEMPERATURE FIBER BLANKET THERMAL INSULATION
  • ASTM C895 : EN-Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
  • ASTM C896 : EN-STANDARD DEFINITIONS OF TERMS RELATING TO CLAY PRODUCTS
  • ASTM C896 REV A : EN-Standard Terminology Relating to Clay Products
  • ASTM C896 REV B : EN-STANDARD DEFINITIONS OF TERMS RELATING TO CLAY PRODUCTS
  • ASTM C897 : EN-Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
  • ASTM C898 : EN-Standard Guide for Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
  • ASTM C898/C898M : EN-Standard Guide for Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
  • ASTM C899 : EN-STANDARD PRACTICE FOR USE OF METRIC UNITS OF MEASURE FOR REPORTING PROPERTIES OF REFRACTORY MATERIALS (COMMITTEE C-8 SUPPLEMENT TO E 380) (R 1985)
  • ASTM C90 : EN-Standard Specification for Loadbearing Concrete Masonry Units
  • ASTM C90 REV A : EN-Standard Specification for Loadbearing Concrete Masonry Units
  • ASTM C90 REV B : EN-Standard Specification for Loadbearing Concrete Masonry Units
  • ASTM C900 : EN-Standard Test Method for Pullout Strength of Hardened Concrete
  • ASTM C901 : EN-STANDARD SPECIFICATION FOR PREFABRICATED MASONRY PANELS (R 1990)
  • ASTM C901 REV A : EN-Standard Specification for Prefabricated Masonry Panels
  • ASTM C902 : EN-STANDARD SPECIFICATION FOR PEDESTRIAN AND LIGHT TRAFFIC PAVING BRICK
  • ASTM C902 REV A : EN-Standard Specification for Pedestrian and Light Traffic Paving Brick
  • ASTM C902 REV B : EN-Standard Specification for Pedestrian and Light Traffic Paving Brick
  • ASTM C903 : EN-STANDARD PRACTICE FOR PREPARING REFRACTORY CONCRETE SPECIMENS BY COLD GUNNING (R 1993) (E1-1993)
  • ASTM C904 : EN-Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
  • ASTM C904 REV A : EN-STANDARD TERMINOLOGY RELATING TO CHEMICAL-RESISTANT NONMETALLIC MATERIALS
  • ASTM C904 REV B : EN-STANDARD TERMINOLOGY RELATING TO CHEMICAL-RESISTANT NONMETALLIC MATERIALS
  • ASTM C904 REV C : EN-STANDARD TERMINOLOGY RELATING TO CHEMICAL-RESISTANT NONMETALLIC MATERIALS
  • ASTM C905 : EN-Standard Test Methods for Apparent Density of Chemical-Resistant Mortars Grouts Monolithic Surfacings and Polymer Concretes
  • ASTM C906 : EN-Standard Test Method for T-Peel Strength of Hot Applied Sealants
  • ASTM C907 : EN-STANDARD TEST METHOD FOR TENSILE ADHESIVE STRENGTH OF PREFORMED TAPE SEALANTS BY DISK METHOD
  • ASTM C908 : EN-Standard Test Method for Yield Strength of Preformed Tape Sealants
  • ASTM C909 : EN-STANDARD FOR DIMENSIONS OF A MODULAR SERIES OF REFRACTORY BRICK AND SHAPES (R 1989) (E1-1989)
  • ASTM C91 : EN-STANDARD SPECIFICATION FOR MASONRY CEMENT
  • ASTM C91 REV A : EN-STANDARD SPECIFICATION FOR MASONRY CEMENT
  • ASTM C91 REV B : EN-STANDARD SPECIFICATION FOR MASONRY CEMENT
  • ASTM C91 REV C : EN-STANDARD SPECIFICATION FOR MASONRY CEMENT
  • ASTM C910 : EN-Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
  • ASTM C910 REV A : EN-Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
  • ASTM C911 : EN-Standard Specification for Quicklime Hydrated Lime and Limestone for Chemical Uses
  • ASTM C912 : EN-STANDARD PRACTICE FOR DESIGNING A PROCESS FOR CLEANING TECHNICAL GLASSES (R 1988) (E1-1988)
  • ASTM C913 : EN-Standard Specification for Precast Concrete Water and Wastewater Structures
  • ASTM C913 REV A : EN-Standard Specification for Precast Concrete Water and Wastewater Structures
  • ASTM C914 : EN-Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
  • ASTM C915 : EN-Standard Specification for Precast Reinforced Concrete Crib Wall Members
  • ASTM C916 : EN-Standard Specification for Adhesives for Duct Thermal Insulation
  • ASTM C917 : EN-STANDARD TEST METHOD FOR EVALUATION OF CEMENT STRENGTH UNIFORMITY FROM A SINGLE SOURCE
  • ASTM C917 REV A : EN-Standard Test Method for Evaluation of Cement Strength Uniformity from a Single Source
  • ASTM C918 : EN-STANDARD METHOD FOR DEVELOPING EARLY AGE COMPRESSION TEST VALUES AND PROJECTING LATER AGE STRENGTHS
  • ASTM C918/C918M : EN-Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
  • ASTM C919 : EN-Standard Practice for Use of Sealants in Acoustical Applications
  • ASTM C92 : EN-STANDARD TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS
  • ASTM C920 : EN-Standard Specification for Elastomeric Joint Sealants
  • ASTM C921 : EN-Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
  • ASTM C921 REV A : EN-Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
  • ASTM C922 : EN-Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets
  • ASTM C923 : EN-STANDARD SPECIFICATION FOR RESILIENT CONNECTORS BETWEEN REINFORCED CONCRETE MANHOLE STRUCTURES PIPES AND LATERALS
  • ASTM C923M : EN-STANDARD SPECIFICATION FOR RESILIENT CONNECTORS BETWEEN REINFORCED CONCRETE MANHOLE STRUCTURES AND PIPES (METRIC) (E1-1987)
  • ASTM C923M REV A : EN-Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures Pipes and Laterals (Metric)
  • ASTM C923M REV B : EN-Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures Pipes and Laterals (Metric)
  • ASTM C924 : EN-Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
  • ASTM C924M : EN-STANDARD PRACTICE FOR TESTING CONCRETE PIPE SEWER LINES BY LOW- PRESSURE AIR TEST METHOD (METRIC)
  • ASTM C925 : EN-Standard Test Method for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
  • ASTM C926 : EN-STANDARD SPECIFICATION FOR APPLICATION OF PORTLAND CEMENT-BASED PLASTER (E1-1984)
  • ASTM C926 REV A : EN-Standard Specification for Application of Portland Cement-Based Plaster
  • ASTM C927 : EN-Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
  • ASTM C928 : EN-STANDARD SPECIFICATION FOR PACKAGED DRY RAPID-HARDENING CEMENTITIOUS MATERIALS FOR CONCRETE REPAIRS
  • ASTM C928 REV A : EN-STANDARD SPECIFICATION FOR PACKAGED DRY RAPID-HARDENING CEMENTITIOUS MATERIALS FOR CONCRETE REPAIRS
  • ASTM C928/C928M : EN-Standard Specification for Packaged Dry Rapid-Hardening Cementitious Materials for Concrete Repairs
  • ASTM C929 : EN-Standard Practice for Handling Transporting Shipping Storage Receiving and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
  • ASTM C93 : EN-STANDARD TEST METHODS FOR COLD CRUSHING STRENGTH AND MODULUS OF RUPTURE OF INSULATING FIREBRICK
  • ASTM C930 : EN-Standard Classification of Potential Health and Safety Concerns Associated with Thermal Insulation Materials and Accessories
  • ASTM C931 : EN-STANDARD SPECIFICATION FOR EXTERIOR GYPSUM SOFFIT BOARD
  • ASTM C931/C931M : EN-STANDARD SPECIFICATION FOR EXTERIOR GYPSUM SOFFIT BOARD
  • ASTM C931/C931M REV C : EN-Standard Specification for Exterior Gypsum Soffit Board
  • ASTM C932 : EN-Standard Specification for Surface-Applied Bonding Agents for Exterior Plastering
  • ASTM C932 REV A : EN-Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
  • ASTM C933 : EN-Standard Specification for Welded Wire Lath
  • ASTM C933 REV A : EN-Standard Specification for Welded Wire Lath
  • ASTM C933 REV B : EN-Standard Specification for Welded Wire Lath
  • ASTM C934 : EN-Standard Guide to Design and Quality Assurance Practices for Nuclear Fuel Rods
  • ASTM C935 : EN-Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
  • ASTM C936 : EN-Standard Specification for Solid Concrete Interlocking Paving Units
  • ASTM C936/C936M : EN-Standard Specification for Solid Concrete Interlocking Paving Units
  • ASTM C937 : EN-Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
  • ASTM C938 : EN-Standard Practice for Proportioning Grout Mixtures for Preplaced- Aggregate Concrete
  • ASTM C939 : EN-STANDARD TEST METHOD FOR FLOW OF GROUT FOR PREPLACED-AGGREGATE CONCRETE (FLOW CONE METHOD) (R 1992)(E1-1992)
  • ASTM C939 REV A : EN-Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
  • ASTM C94 : EN-STANDARD SPECIFICATION FOR READY-MIXED CONCRETE
  • ASTM C94 REV A : EN-STANDARD SPECIFICATION FOR READY-MIXED CONCRETE
  • ASTM C94 REV B : EN-STANDARD SPECIFICATION FOR READY-MIXED CONCRETE
  • ASTM C94/C94M : EN-Standard Specification for Ready-Mixed Concrete
  • ASTM C94/C94M REV A : EN-Standard Specification for Ready-Mixed Concrete
  • ASTM C94/C94M REV C : EN-Standard Specification for Ready-Mixed Concrete
  • ASTM C940 : EN-Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C940 REV A : EN-Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C941 : EN-STANDARD TEST METHOD FOR WATER RETENTIVITY OF GROUT MIXTURES FOR PREPLACED-AGGREGATE CONCRETE IN THE LABORATORY
  • ASTM C942 : EN-Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C942 REV A : EN-Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C943 : EN-Standard Method for MAKING TEST CYLINDERS AND PRISMS FOR DETERMINING STRENGTH AND DENSITY OF PREPLACED-AGGREGATE CONCRETE IN THE LABORATORy
  • ASTM C944 : EN-Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
  • ASTM C944 REV A : EN-STANDARD TEST METHOD FOR ABRASION RESISTANCE OF CONCRETE OR MORTAR SURFACES BY THE ROTATING-CUTTER METHOD
  • ASTM C944/C944M : EN-Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
  • ASTM C945 : EN-Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
  • ASTM C946 : EN-Standard Practice for Construction of Dry-Stacked Surface-Bonded Walls
  • ASTM C947 : EN-Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam with Third-Point Loading)
  • This collection contains documents from the following standards organization(s): ASTM International :

 

ASTM A , ASTM B ,  ASTM C | 1 |2 || 3 |,  ASTM D , ASTM E ASTM F , ASTM G ,