STD-EN 5XXXX
- EN 500-1:2006+A1:2009 Mobile road construction machinery – Safety – Part 1: Common requirements
- EN 500-2:2006+A1:2008 Mobile road construction machinery – Safety – Part 2: Specific requirements for road-milling machines
- EN 500-3:2006+A1:2008 Mobile road construction machinery – Safety – Part 3: Specific requirements for soil-stabilising machines and recycling machines
- EN 500-4:2011 Mobile road construction machinery – Safety – Part 4: Specific requirements for compaction machines
- EN 500-6:2006+A1:2008 Mobile road construction machinery – Safety – Part 6: Specific requirements for paver-finishers
- EN 501:1994 Roofing products from metal sheet – Specification for fully supported roofing products of zinc sheet
- EN 502:2013 Roofing products from metal sheet – Specification for fully supported roofing products of stainless steel sheet
- EN 504:1999 Roofing products from metal sheet – Specification for fully supported roofing products of copper sheet
- EN 50465:2008 Gas appliances – Fuel cell gas heating appliances – Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW
- EN 505:2013 Roofing products from metal sheet – Specification for fully supported roofing products of steel sheet
- EN 506:2008 Roofing products of metal sheet – Specification for self-supporting products of copper or zinc sheet
- EN 507:1999 Roofing products from metal sheet – Specification for fully supported roofing products of aluminium sheet
- EN 508-1:2008 Roofing products from metal sheet – Specification for self-supporting products of steel, aluminium or stainless steel sheet – Part 1: Steel
- EN 508-2:2008 Roofing products from metal sheet – Specification for self-supporting products of steel, aluminium or stainless steel sheet – Part 2: Aluminium
- EN 508-3:2008 Roofing products from metal sheet – Specification for self-supporting products of steel, aluminium or stainless steel sheet – Part 3: Stainless steel
- EN 509:1999 Decorative fuel-effect gas appliances
- EN 509:1999/A1:2003 Decorative fuel-effect gas appliances
- EN 509:1999/A2:2004 Decorative fuel-effect gas appliances
- EN 510:1993 Specification for protective clothing for use where there is a risk of entanglement with moving parts
- EN 511:2006 Protective gloves against cold
- EN 512:1994 Fibre-cement products – Pressure pipes and joints
- EN 512:1994/A1:2001 Fibre-cement products – Pressure pipes and joints
- EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of the resistance to artificial weathering
- EN 514:2000 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of the strength of welded corners and T-joints
- EN 515:1993 Aluminium and aluminium alloys – Wrought products – Temper designations
- EN 516:2006 Prefabricated accessories for roofing – Installations for roof access – Walkways, treads and steps
- EN 517:2006 Prefabricated accessories for roofing – Roof safety hooks
- EN 520:2004+A1:2009 Gypsum plasterboards – Definitions, requirements and test methods
- EN 521:2006 Specifications for dedicated liquefied petroleum gas appliances – Portable vapour pressure liquefied petroleum gas appliances
- EN 523:2003 Steel strip sheaths for prestressing tendons – Terminology, requirements, quality control
- EN 524-1:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 1: Determination of shape and dimensions
- EN 524-2:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 2: Determination of flexural behaviour
- EN 524-3:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 3: To-and-fro bending test
- EN 524-4:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 4: Determination of lateral load resistance
- EN 524-5:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 5: Determination of tensile load resistance
- EN 524-6:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 6: Determination of leaktightness (Determination of water loss)
- EN 525:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
- EN 526:1993 Inland navigation vessels – Gangway with a length not exceeding 8 m – Requirements, types
- EN 527-1:2011 Office furniture – Work tables and desks – Part 1: Dimensions
- EN 527-2:2002 Office furniture – Work tables and desks – Part 2: Mechanical safety requirements
- EN 527-3:2003 Office furniture – Work tables and desks – Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure
- EN 528:2008 Rail dependent storage and retrieval equipment – Safety requirements
- EN 529:2005 Respiratory protective devices – Recommendations for selection, use, care and maintenance – Guidance document
- EN 530:2010 Abrasion resistance of protective clothing material – Test methods
- EN 534:2006+A1:2010 Corrugated bitumen sheets – Product specification and test methods
- EN 536:1999 Road construction machines – Asphalt mixing plants – Safety requirements
- EN 538:1994 Clay roofing tiles for discontinuous laying – Flexural strength test
- EN 539-1:2005 Clay roofing tiles for discontinuous laying – Determination of physical characteristics – Part 1: Impermeability test
- EN 539-2:2013 Clay roofing tiles for discontinuous laying – Determination of physical characteristics – Part 2: Test for frost resistance
- EN 541:2006 Aluminium and aluminium alloys – Rolled products for cans, closures and lids – Specifications
- EN 54-1:2011 Fire detection and fire alarm systems – Part 1: Introduction
- EN 54-10:2002 Fire detection and fire alarm systems – Part 10: Flame detectors – Point detectors
- EN 54-10:2002/A1:2005 Fire detection and fire alarm systems – Part 10: Flame detectors – Point detectors
- EN 54-11:2001 Fire detection and fire alarm systems – Part 11: Manual call points
- EN 54-11:2001/A1:2005 Fire detection and fire alarm systems – Part 11: Manual call points
- EN 54-12:2002 Fire detection and fire alarm systems – Part 12: Smoke detectors – Line detectors using an optical light beam
- EN 54-13:2005 Fire detection and fire alarm systems – Part 13: Compatibility assessment of system components
- EN 54-16:2008 Fire detection and fire alarm systems – Part 16: Voice alarm control and indicating equipment
- EN 54-17:2005 Fire detection and fire alarm systems – Part 17: Short-circuit isolators
- EN 54-17:2005/AC:2007 Fire detection and fire alarm systems – Part 17: Short-circuit isolators
- EN 54-18:2005 Fire detection and fire alarm systems – Part 18: Input/output devices
- EN 54-18:2005/AC:2007 Fire detection and fire alarm systems – Part 18: Input/output devices
- EN 54-2:1997 Fire detection and fire alarm systems – Part 2: Control and indicating equipment
- EN 54-2:1997/A1:2006 Fire detection and fire alarm systems – Part 2: Control and indicating equipment
- EN 54-2:1997/AC:1999 Fire detection and fire alarm systems – Part 2: Control and indicating equipment
- EN 542:2003 Adhesives – Determination of density
- EN 54-20:2006 Fire detection and fire alarm systems – Part 20: Aspirating smoke detectors
- EN 54-20:2006/AC:2008 Fire detection and fire alarm systems – Part 20: Aspirating smoke detectors
- EN 54-21:2006 Fire detection and fire alarm systems – Part 21: Alarm transmission and fault warning routing equipment
- EN 54-23:2010 Fire detection and fire alarm systems – Part 23: Fire alarm devices – Visual alarm devices
- EN 54-24:2008 Fire detection and fire alarm systems – Part 24: Components of voice alarm systems – Loudspeakers
- EN 54-25:2008 Fire detection and fire alarm systems – Part 25: Components using radio links
- EN 54-25:2008/AC:2012 Fire detection and fire alarm systems – Part 25: Components using radio links
- EN 54-3:2001 Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders
- EN 54-3:2001/A1:2002 Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders
- EN 54-3:2001/A2:2006 Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders
- EN 543:2003 Adhesives – Determination of apparent density of powder and granule adhesives
- EN 54-4:1997 Fire detection and fire alarm systems – Part 4: Power supply equipment
- EN 54-4:1997/A1:2002 Fire detection and fire alarm systems – Part 4: Power supply equipment
- EN 54-4:1997/A2:2006 Fire detection and fire alarm systems – Part 4: Power supply equipment
- EN 54-4:1997/AC:1999 Fire detection and fire alarm systems – Part 4: Power supply equipment
- EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements – Product specification and test methods
- EN 54-5:2000 Fire detection and fire alarm systems – Part 5: Heat detectors – Point detectors
- EN 54-5:2000/A1:2002 Fire detection and fire alarm systems – Part 5: Heat detectors – Point detectors
- EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
- EN 546-1:2006 Aluminium and aluminium alloys – Foil – Part 1: Technical conditions for inspection and delivery
- EN 546-2:2006 Aluminium and aluminium alloys – Foil – Part 2: Mechanical properties
- EN 546-3:2006 Aluminium and aluminium alloys – Foil – Part 3: Tolerances on dimensions
- EN 546-4:2006 Aluminium and aluminium alloys – Foil – Part 4: Special property requirements
- EN 54-7:2000 Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization
- EN 54-7:2000/A1:2002 Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization
- EN 54-7:2000/A2:2006 Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization
- EN 547-1:1996+A1:2008 Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
- EN 547-2:1996+A1:2008 Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings
- EN 547-3:1996+A1:2008 Safety of machinery – Human body measurements – Part 3: Anthropometric data
- EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
- EN 556-1:2001 Sterilization of medical devices – Requirements for medical devices to be designated “STERILE” – Part 1: Requirements for terminally sterilized medical devices
- EN 556-1:2001/AC:2006 Sterilization of medical devices – Requirements for medical devices to be designated ‘STERILE’ – Part 1: Requirements for terminally sterilized medical devices
- EN 556-2:2003 Sterilization of medical devices – Requirements for medical devices to be designated “STERILE” – Part 2: Requirements for aseptically processed medical devices
- EN 558:2008+A1:2011 Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – PN and Class designated valves
- EN 560:2005 Gas welding equipment – Hose connections for equipment for welding, cutting and allied processes
- EN 560:2005/AC:2007 Gas welding equipment – Hose connections for equipment for welding, cutting and allied processes
- EN 561:2002 Gas welding equipment – Quick-action coupling with shut-off valves for welding, cutting and allied processes
- EN 564:2006 Mountaineering equipment – Accessory cord – Safety requirements and test methods
- EN 565:2006 Mountaineering equipment – Tape – Safety requirements and test methods
- EN 566:2006 Mountaineering equipment – Slings – Safety requirements and test methods
- EN 567:2013 Mountaineering equipment – Rope clamps – Safety requirements and test methods
- EN 568:2007 Mountaineering equipment – Ice anchors – Safety requirements and test methods
- EN 569:2007 Mountaineering equipment – Pitons – Safety requirements and test methods
- EN 570:2007 Aluminium and aluminium alloys – Impact extrusion slugs obtained from wrought products – Specification
- EN 572-1:2012 Glass in building – Basic soda lime silicate glass products – Part 1: Definitions and general physical and mechanical properties
- EN 572-2:2012 Glass in building – Basic soda lime silicate glass products – Part 2: Float glass
- EN 572-3:2012 Glass in building – Basic soda lime silicate glass products – Part 3: Polished wired glass
- EN 572-4:2012 Glass in building – Basic soda lime silicate glass products – Part 4: Drawn sheet glass
- EN 572-5:2012 Glass in building – Basic soda lime silicate glass products – Part 5: Patterned glass
- EN 572-6:2012 Glass in building – Basic soda lime silicate glass products – Part 6: Wired patterned glass
- EN 572-7:2012 Glass in building – Basic soda lime silicate glass products – Part 7: Wired or unwired channel shaped glass
- EN 572-8:2012 Glass in building – Basic soda lime silicate glass products – Part 8: Supplied and final cut sizes
- EN 572-9:2004 Glass in building – Basic soda lime silicate glass products – Part 9: Evaluation of conformity/Product standard
- EN 573-1:2004 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 1: Numerical designation system
- EN 573-2:1994 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 2: Chemical symbol based designation system
- EN 573-3:2013 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 3: Chemical composition and form of products
- EN 573-5:2007 Aluminium and aluminium alloys – Chemical composition and form of wrought products – Part 5: Codification of standardized wrought products
- EN 574:1996+A1:2008 Safety of machinery – Two-hand control devices – Functional aspects – Principles for design
- EN 575:1995 Aluminium and aluminium alloys – Master alloys produced by melting – Specifications
- EN 576:2003 Aluminium and aluminium alloys – Unalloyed aluminium ingots for remelting – Specifications
- EN 577:1995 Aluminium and aluminium alloys – Liquid metal – Specifications
- EN 58:2012 Bitumen and bituminous binders – Sampling bituminous binders
- EN 580:2003 Plastics piping systems – Unplasticized poly(vinyl chloride) (PVC-U) pipes – Test method for the resistance to dichloromethane at a specified temperature (DCMT)
- EN 581-1:2006 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 1: General safety requirements
- EN 581-2:2009 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 2: Mechanical safety requirements and test methods for seating
- EN 581-3:2007 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 3: Mechanical safety requirements and test methods for tables
- EN 582:1993 Thermal spraying – Determination of tensile adhesive strength
- EN 583-1:1998 Non-destructive testing – Ultrasonic examination – Part 1: General principles
- EN 583-1:1998/A1:2003 Non-destructive testing – Ultrasonic examination – Part 1: General principles
- EN 583-2:2001 Non-destructive testing – Ultrasonic examination – Part 2: Sensitivity and range setting
- EN 583-3:1997 Non-destructive testing – Ultrasonic examination – Part 3: Transmission technique
- EN 583-4:2002 Non-destructive testing – Ultrasonic examination – Part 4: Examination for discontinuities perpendicular to the surface
- EN 583-4:2002/A1:2003 Non-destructive testing – Ultrasonic examination – Part 4: Examination for discontinuities perpendicular to the surface
- EN 583-5:2000 Non-destructive testing – Ultrasonic examination – Part 5: Characterization and sizing of discontinuities
- EN 583-5:2000/A1:2003 Non-destructive testing – Ultrasonic examination – Part 5: Characterization and sizing of discontinuities
- EN 583-6:2008 Non-destructive testing – Ultrasonic examination – Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
- EN 586-1:1997 Aluminium and aluminium alloys – Forgings – Part 1: Technical conditions for inspection and delivery
- EN 586-2:1994 Aluminium and aluminium alloys – Forgings – Part 2: Mechanical properties and additional property requirements
- EN 586-3:2001 Aluminium and aluminium alloys – Forgings – Part 3: Tolerances on dimensions and form
- EN 588-1:1996 Fibre-cement pipes for sewers and drains – Part 1: Pipes, joints and fittings for gravity systems
- EN 588-2:2001 Fibre cement pipes for drains and sewers – Part 2: Manholes and inspection chambers
- EN 589:2008+A1:2012 Automotive fuels – LPG – Requirements and test methods
- EN 59:1977 Glass reinforced plastics – Measurement of hardness by means of a Barcol impressor
- EN 590:2013 Automotive fuels – Diesel – Requirements and test methods
- EN 593:2009+A1:2011 Industrial valves – Metallic butterfly valves
- EN 594:2011 Timber structures – Test methods – Racking strength and stiffness of timber frame wall panels
- EN 595:1995 Timber structures – Test methods – Test of trusses for the determination of strength and deformation behaviour
- EN 596:1995 Timber structures – Test methods – Soft body impact test of timber framed walls
- EN 597-1:1994 Furniture – Assessment of the ignitability of mattresses and upholstered bed bases – Part 1: Ignition source: Smouldering cigarette
- EN 597-2:1994 Furniture – Assessment of the ignitability of mattresses and upholstered bed bases – Part 2: Ignition source: Match flame equivalent
- EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods
- EN 599-1:2009 Durability of wood and wood-based products – Efficacy of preventive wood preservatives as determined by biological tests – Part 1: Specification according to use class
- EN 599-2:1995 Durability of wood and wood-based products – Performance of preventive wood preservatives as determined by biological tests – Part 2: Classification and labelling
