STD-CEN,CR,CWA,ECISS

-|1|-

• CEN Guide 414:2004 Safety of machinery – Rules for the drafting and presentation of safety standards
• CEN ISO/TR 10400:2011 Petroleum and natural gas industries – Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing (ISO/TR 10400:2007)
• CEN ISO/TR 12296:2013 Ergonomics – Manual handling of people in the healthcare sector (ISO/TR 12296:2012)
• CEN ISO/TR 13624-2:2013 Petroleum and natural gas industries – Drilling and production equipment – Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR 13624-2:2009)
• CEN ISO/TR 13881:2011 Petroleum and natural gas industries – Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000)
• CEN ISO/TR 15608:2013 Welding – Guidelines for a metallic materials grouping system (ISO/TR 15608:2013)
• CEN ISO/TR 17641-3:2005 Destructive tests on welds in metallic materials – Hot cracking tests for weldments – Arc welding processes – Part 3: Externally loaded tests (ISO/TR 17641-3:2005)
• CEN ISO/TR 17844:2004 Welding – Comparison of standardised methods for the avoidance of cold cracks (ISO/TR 17844:2004)
• CEN ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012)
• CEN ISO/TR 22411:2011 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008)
• CEN ISO/TR 22648:2007 Footwear – Performance requirements for components for footwear – Stiffeners and toepuffs (ISO/TR 22648:2007)
• CEN ISO/TR 24014-2:2013 Public transport – Interoperable fare management system – Part 2: Business practices (ISO/TR 24014-2:2013)
• CEN ISO/TR 24014-3:2013 Public transport – Interoperable fare management system – Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)
• CEN ISO/TR 24094:2007 Analysis of natural gas – Validation methods for gaseous reference materials (ISO/TR 24094:2006)
• CEN ISO/TR 24475:2013 Cosmetics – Good Manufacturing Practices – General training document (ISO/TR 24475:2010)
• CEN ISO/TR 25107:2006 Non-destructive testing – Guidelines for NDT training syllabuses (ISO/TR 25107:2006)
• CEN ISO/TR 25108:2006 Non-destructive testing – Guidelines for NDT personnel training organizations (ISO/TR 25108:2006)
• CEN ISO/TR 26369:2009 Cosmetics – Sun protection test methods – Review and evaluation of methods to assess the photoprotection of sun protection products (ISO/TR 26369:2009)
• CEN ISO/TR 27165:2012 Thermoplastics piping systems – Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012)
• CEN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials – Part 6: Guidelines on implementing ISO 3834 (ISO/TR 3834-6:2007)
• CEN ISO/TR 9241-100:2011 Ergonomics of human-system interaction – Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010)
• CEN ISO/TR 9241-331:2013 Ergonomics of human-system interaction – Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012)
• CEN ISO/TS 12747:2013 Petroleum and natural gas industries – Pipeline transportation systems – Recommended practice for pipeline life extension (ISO/TS 12747:2011)
• CEN ISO/TS 15011-6:2012 Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012)
• CEN ISO/TS 15011-6:2012/AC:2012 Health and safety in welding and allied processes – Laboratory method for sampling fume and gases – Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding – Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012)
• CEN ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003)
• CEN ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003)
• CEN ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003)
• CEN ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2009)
• CEN ISO/TS 15883-5:2005 Washer-disinfectors – Part 5: Test soils and methods for demonstrating cleaning efficacy (ISO/TS 15883-5:2005)
• CEN ISO/TS 16401-1:2012 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2 – Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012)
• CEN ISO/TS 16401-2:2012 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2 – Part 2: Abstract test suite (ISO/TS 16401-2:2012)
• CEN ISO/TS 16403-1:2012 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-4 – Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012)
• CEN ISO/TS 16403-2:2012 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-4 – Part 2: Abstract test suite (ISO/TS 16403-2:2012)
• CEN ISO/TS 16407-1:2011 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1 – Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011)
• CEN ISO/TS 16407-2:2012 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1 – Part 2: Abstract test suite (ISO/TS 16407-2:2012)
• CEN ISO/TS 16410-1:2011 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3 – Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011)
• CEN ISO/TS 16410-2:2012 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3 – Part 2: Abstract test suite (ISO/TS 16410-2:2012)
• CEN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (ISO/TS 16491:2012)
• CEN ISO/TS 16634-2:2009 Food products – Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content – Part 2: Cereals, pulses and milled cereal products (ISO/TS 16634-2:2009)
• CEN ISO/TS 17444-1:2012 Electronic fee collection – Charging performance – Part 1: Metrics (ISO/TS 17444-1:2012)
• CEN ISO/TS 17574:2009 Electronic fee collection – Guidelines for security protection profiles (ISO/TS 17574:2009)
• CEN ISO/TS 17575-1:2010 Electronic fee collection – Application interface definition for autonomous systems – Part 1: Charging (ISO/TS 17575-1:2010)
• CEN ISO/TS 17575-1:2010/AC:2013 Electronic fee collection – Application interface definition for autonomous systems – Part 1: Charging – Technical Corrigendum 1 (ISO/TS 17575-1:2010/Cor 1:2013)
• CEN ISO/TS 17575-2:2010 Electronic fee collection – Application interface definition for autonomous systems – Part 2: Communication and connection to the lower layers (ISO/TS 17575-2:2010)
• CEN ISO/TS 17575-3:2011 Electronic fee collection – Application interface definition for autonomous systems – Part 3: Context data (ISO/TS 17575-3:2011)
• CEN ISO/TS 17575-3:2011/AC:2013 Electronic fee collection – Application interface definition for autonomous systems – Part 3: Context data – Technical Corrigendum 1 (ISO/TS 17575-3:2011/Cor 1:2013)
• CEN ISO/TS 17575-4:2011 Electronic fee collection – Application interface definition for autonomous systems – Part 4: Roaming (ISO/TS 17575-4:2011)
• CEN ISO/TS 17665-2:2009 Sterilization of health care products – Moist heat – Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009)
• CEN ISO/TS 17764-1:2006 Animal feeding stuffs – Determination of the content of fatty acids – Part 1: Preparation of methyl esters (ISO/TS 17764-1:2002)
• CEN ISO/TS 17764-2:2006 Animal feeding stuffs – Determination of the content of fatty acids – Part 2: Gas chromatographic method (ISO/TS 17764-2:2002)
• CEN ISO/TS 17845:2004 Welding and allied processes – Designation system for imperfections (ISO/TS 17845:2004)
• CEN ISO/TS 17892-1:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 1: Determination of water content (ISO/TS 17892-1:2004)
• CEN ISO/TS 17892-1:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 1: Determination of water content (ISO/TS 17892-1:2004)
• CEN ISO/TS 17892-10:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 10: Direct shear tests (ISO/TS 17892-10:2004)
• CEN ISO/TS 17892-10:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 10: Direct shear tests (ISO/TS 17892-10:2004)
• CEN ISO/TS 17892-11:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 11: Determination of permeability by constant and falling head (ISO/TS 17892-11:2004)
• CEN ISO/TS 17892-11:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 11: Determination of permeability by constant and falling head (ISO/TS 17892-11:2004)
• CEN ISO/TS 17892-12:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of Atterberg limits (ISO/TS 17892-12:2004)
• CEN ISO/TS 17892-12:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of Atterberg limits (ISO/TS 17892-12:2004)
• CEN ISO/TS 17892-2:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004)
• CEN ISO/TS 17892-2:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004)
• CEN ISO/TS 17892-3:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 3: Determination of particle density – Pycnometer method (ISO/TS 17892-3:2004)
• CEN ISO/TS 17892-3:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 3: Determination of particle density – Pycnometer method (ISO/TS 17892-3:2004)
• CEN ISO/TS 17892-4:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004)
• CEN ISO/TS 17892-4:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004)
• CEN ISO/TS 17892-5:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 5: Incremental loading oedometer test (ISO/TS 17892-5:2004)
• CEN ISO/TS 17892-5:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 5: Incremental loading oedometer test (ISO/TS 17892-5:2004)
• CEN ISO/TS 17892-6:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 6: Fall cone test (ISO/TS 17892-6:2004)
• CEN ISO/TS 17892-6:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 6: Fall cone test (ISO/TS 17892-6:2004)
• CEN ISO/TS 17892-7:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 7: Unconfined compression test on fine-grained soil (ISO/TS 17892-7:2004)
• CEN ISO/TS 17892-7:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 7: Unconfined compression test on fine grained soils (ISO/TS 17892-7:2004)
• CEN ISO/TS 17892-8:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 8: Unconsolidated undrained triaxial test (ISO/TS 17892-8:2004)
• CEN ISO/TS 17892-8:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 8: Unconsolidated undrained triaxial test (ISO/TS 17892-8:2004)
• CEN ISO/TS 17892-9:2004 Geotechnical investigation and testing – Laboratory testing of soil – Part 9: Consolidated triaxial compression tests on water saturated soil (ISO/TS 17892-9:2004)
• CEN ISO/TS 17892-9:2004/AC:2005 Geotechnical investigation and testing – Laboratory testing of soil – Part 9: Consolidated triaxial compression tests on water saturated soil (ISO/TS 17892-9:2004)
• CEN ISO/TS 17919:2013 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013)
• CEN ISO/TS 18234-1:2013 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS 18234-1:2013)
• CEN ISO/TS 18234-10:2013 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 10: Conditional access information (TPEG1-CAI) (ISO/TS 18234-10:2013)
• CEN ISO/TS 18234-11:2013 Intelligent transport systems – Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS 18234-11:2013)
• CEN ISO/TS 18234-2:2013 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013)
• CEN ISO/TS 18234-3:2013 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 3: Service and network information (TPEG1-SNI) (ISO/TS 18234-3:2013)
• CEN ISO/TS 18234-4:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Expert Group (TPEG) data-streams – Part 4: Road Traffic Message (RTM) application (ISO/TS 18234-4:2006)
• CEN ISO/TS 18234-5:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Expert Group (TPEG) data-streams – Part 5: Public Transport Information (PTI) application (ISO/TS 18234-5:2006)
• CEN ISO/TS 18234-6:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Expert Group (TPEG) data-streams – Part 6: Location referencing applications (ISO/TS 18234-6:2006)
• CEN ISO/TS 18234-7:2013 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 7: Parking information (TPEG1-PKI) (ISO/TS 18234-7.2013)
• CEN ISO/TS 18234-9:2013 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format – Part 9: Traffic event compact (TPEG1-TEC) (ISO/TS 18234-9:2013)
• CEN ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings – Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2008)
• CEN ISO/TS 21003-7:2008/A1:2010 Multilayer piping systems for hot and cold water installations inside buildings – Part 7: Guidance for the assessment of conformity – Amendment 1 (ISO/TS 21003-7:2008/Amd 1:2010)
• CEN ISO/TS 21268-1:2009 Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials – Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS 21268-1:2007)
• CEN ISO/TS 21268-2:2009 Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials – Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS 21268-2:2007)
• CEN ISO/TS 21268-3:2009 Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials – Part 3: Up-flow percolation test (ISO/TS 21268-3:2007)
• CEN ISO/TS 21268-4:2009 Soil quality – Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials – Part 4: Influence of pH on leaching with initial acid/base addition (ISO/TS 21268-4:2007)
• CEN ISO/TS 21432:2005 Non-destructive testing – Standards test method for determining residual stresses by neutron diffraction (ISO 21432:2005)
• CEN ISO/TS 21432:2005/AC:2009 Non-destructive testing – Standards test method for determining residual stresses by neutron diffraction (ISO 21432:2005/Cor 1:2008)
• CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
• CEN ISO/TS 22367:2010 Medical laboratories – Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009)
• CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations – Polyethylene of raised temperature resistance (PE-RT) – Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011)
• CEN ISO/TS 22475-2:2006 Geotechnical investigation and testing – Sampling methods and groundwater measurements – Part 2: Qualification criteria for enterprises and personnel (ISO/TS 22475-2:2006)
• CEN ISO/TS 22475-3:2007 Geotechnical investigation and testing – Sampling methods and groundwater measurements – Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007)
• CEN ISO/TS 22476-10:2005 Geotechnical investigation and testing – Field testing – Part 10: Weight sounding test (ISO/TS 22476-10:2005)
• CEN ISO/TS 22476-11:2005 Geotechnical investigation and testing – Field testing – Part 11: Flat dilatometer test (ISO 22476-11:2005)
• CEN ISO/TS 24530-1:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) – Part 1: Introduction, common data types and tpegML (ISO/TS 24530-1:2006)
• CEN ISO/TS 24530-2:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) – Part 2: tpeg-locML (ISO/TS 24530-2:2006)
• CEN ISO/TS 24530-3:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) – Part 3: tpeg-rtmML (ISO/TS 24530-3:2006)
• CEN ISO/TS 24530-4:2006 Traffic and Travel Information (TTI) – TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) – Part 4: tpeg-ptiML (ISO/TS 24530-4:2006)
• CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries – Composite repairs for pipework – Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
• CEN ISO/TS 25110:2013 Electronic fee collection – Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013)
• CEN ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007)
• CEN ISO/TS 27469:2011 Petroleum, petrochemical and natural gas industries – Method of test for fire dampers (ISO/TS 27469:2010)
• CEN ISO/TS 27687:2009 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008, Corrected version 2009-02-01)
• CEN ISO/TS 29001:2011 Petroleum, petrochemical and natural gas industries – Sector-specific quality management systems – Requirements for product and service supply organizations (ISO/TS 29001:2010)
• CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 2: Rules (ISO/TS 8062-2:2013)
• CEN ISO/TS 8662-11:2004 Hand-held portable power tools – Measurement of vibrations at the handle – Part 11: Fastener driving tools (ISO 8662-11:1999 + Amd. 1:2001)
• CEN ISO/TS 8662-11:2004/AC:2004 Hand-held portable power tools – Measurement of vibrations at the handle – Part 11: Fastener driving tools (ISO 8662-11:1999 + Amd. 1:2001)
• CEN/CLC Guide 17:2010 Guidance for writing standards taking into account micro, small and medium-sized enterprises (SMEs) needs
• CEN/CLC Guide 18:2010 Execution of Specific Agreements issued to CEN and CENELEC in accordance with the EC and EFTA Framework Partnership Agreements 2009 (FPA 2009) covering the tasks to be assigned to CEN and CENELEC relating to European standardization
• CEN/CLC Guide 21:2012 CEN-CENELEC Membership Fee – Calculation methodology & periodic review policy
• CEN/CLC Guide 22:2013 Guide on the organisational structure and processes for the assessment of the membership criteria of CEN and CENELEC
• CEN/CLC Guide 23:2013 Consortium bridge – Adoption of third-party specifications as European Standardization Publications
• CEN/CLC Guide 24:2013 Use and protection of the trademarks and domain names of CEN and CENELEC
• CEN/CLC Guide 25:2013 The concept of Partnership with European Organisations and other stakeholders
• CEN/CLC Guide 26:2013 Railway applications – Preparation of standards for urban rail systems design, construction, manufacture, operations and maintenance.
• CEN/CLC Guide 27:2013 CEN and CENELEC involvement in Technical Assistance (TA) projects
• CEN/CLC/ETSI TR 50572:2011 Functional Reference Architecture for Communications in Smart Metering Systems
• CEN/CLC/ETSI/SMCG – Smart Meters Co-ordination Group
• CEN/CLC/JWG 3 – Energy Management and related services – General requirements and qualification procedures
• CEN/CLC/JWG AIMD – CEN/CENELEC Joint Working Group on Active Implantable Medical Devices
• CEN/CLC/JWG CMI – Continuous measuring instruments
• CEN/CLC/JWG FCGA – CEN/CENELEC Joint Working Group on Fuel cell gas appliances
• CEN/CLC/TC 1 – Criteria for conformity assessment bodies
• CEN/CLC/TC 2 – Power Engineering
• CEN/CLC/WG FPR – Fire protection for railway applications
• CEN/TR 115-3:2009 Safety of escalators and moving walks – Part 3: Correlation between EN 115:1995 and its amendments and EN 115-1:2008
• CEN/TR 12401:2009 Dentistry – Guidance on the classification of dental devices and accessories
• CEN/TR 13259:2013 Gas welding equipment – Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes
• CEN/TR 1335-4:2009 Office furniture – Office work chair – Part 4: Clarifications to EN 1335-1:2000 (Dimensions)
• CEN/TR 13445-9:2011 Unfired pressure vessels – Part 9: Conformance of the EN 13445 series to ISO 16528
• CEN/TR 13480-7:2002 Metallic industrial piping – Part 7: Guidance on the use of conformity assessment procedures
• CEN/TR 13548:2004 General rules for the design and installation of ceramic tiling
• CEN/TR 13737-1:2012 Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure – Part 1: General
• CEN/TR 14489:2005 Fire-resistant hydraulic fluids – Classification and specification – Guidelines on selection for the protection of safety, health and the environment
• CEN/TR 14542:2003 Durability of wood and wood-based products – Guidelines for the validity of test results from former standards after their revision
• CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
• CEN/TR 14560:2003 Guidance for selection, use, care and maintenance of protective clothing against heat and flame
• CEN/TR 14568:2003 EN 54 – Fire detection and fire alarm systems – Interpretation of specific clauses of EN 54-2:1997
• CEN/TR 14599:2005 Terms and definitions for welding purposes in relation with EN 1792
• CEN/TR 14613:2003 Thermal performance of building materials and components – Principles for the determination of thermal properties of moist material and components
• CEN/TR 14633:2003 Welding – Working positions – Comparison of current international, European and US designations
• CEN/TR 14709:2006 Postal services – Quality of service – Guide for the implementation of EN 13850
• CEN/TR 14715:2004 Safety of machinery – Ionizing radiation emited by machinery – Guidance for the application of technical standards in the design of machinery in order to comply with legislative requirements
• CEN/TR 14723:2003 Durability of wood and wood-based products – Field and accelerated conditioning tests (FACT) for wood preservative out of ground contact
• CEN/TR 14734:2004 Durability of wood and wood-based products – Determination of treatability of timber species to be impregnated with wood preservatives – Laboratory method
• CEN/TR 14748:2004 Non-destructive testing – Methodology for qualification of non-destructive tests
• CEN/TR 14788:2006 Ventilation for buildings – Design and dimensioning of residential ventilation systems
• CEN/TR 14823:2003 Durability of wood and wood-based products – Quantitative determination of pentachlorophenol in wood – Gas chromatographic method
• CEN/TR 14839:2004 Wood preservatives – Determination of the preventive efficacy against wood destroying basidiomycetes fungi
• CEN/TR 14922:2004 Portable fire extinguishers – Model laboratory – Report in compliance with EN 3-7
• CEN/TR 15003:2012 Durability of wood and wood-based products – Criteria for hot air processes for curative uses against wood destroying organisms
• CEN/TR 15046:2005 Wood preservatives – Artificial weathering of treated wood prior to biological testing – UV-radiation and water-spraying procedure
• CEN/TR 15068:2009 Gas welding equipment – Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering – Measurement method
• CEN/TR 15071:2005 Safety of toys – National translations of warnings and instructions for use in EN 71
• CEN/TR 15106:2005 Fertilizers – Determination of chelating agents EDDHA and EDDHMA by ion pair chromatography – Comparison of non-standardized Lucena method with EN 13368-2:2001
• CEN/TR 15123:2005 Design, preparation and application of internal polymer plastering systems
• CEN/TR 15124:2005 Design, preparation and application of internal gypsum plastering systems
• CEN/TR 15125:2005 Design, preparation and application of internal cement and/or lime plastering systems
• CEN/TR 15131:2006 Thermal performance of building materials – The use of interpolating equations in relation to thermal measurement on thick specimens – Guarded hot plate and heat flow meter apparatus
• CEN/TR 15134:2005 Non-destructive testing – Automated ultrasonic examination – Selection and application of systems
• CEN/TR 15135:2005 Welding – Design and non-destructive testing of welds
• CEN/TR 15138:2005 Petroleum products and other liquids – Guide to flash point testing
• CEN/TR 15139:2005 Petroleum products and other liquids – Applicability of test methods on sulfur determination in petrol and diesel fuel
• CEN/TR 15160:2005 Petroleum and related products – Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) – Information and results on round robin tests
• CEN/TR 15177:2006 Testing the freeze-thaw resistance of concrete – Internal structural damage
• CEN/TR 15225:2005 Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars
• CEN/TR 15226:2006 Building products – Treatment of acoustics in product technical specifications
• CEN/TR 15230:2005 Workplace atmospheres – Guidance for sampling of inhalable, thoracic and respirable aerosol fractions
• CEN/TR 15235:2005 Welding – Methods for assessing imperfections in metallic structures
• CEN/TR 15278:2006 Workplace exposure – Strategy for the evaluation of dermal exposure
• CEN/TR 15314:2006 Durability of wood and wood-based products – Quantitative determination of quaternary ammonium compounds in wood
• CEN/TR 15352:2006 Bitumen and bituminous binders – Development of performance-related specifications: status report 2005
• CEN/TR 15367-1:2007 Petroleum products – Guide for good housekeeping – Part 1: Automotive diesel fuels
• CEN/TR 15367-2:2007 Petroleum products – Guide for good housekeeping – Part 2: Automotive petrol fuels
• CEN/TR 15367-3:2009 Petroleum products – Guide for good housekeeping – Part 3: Prevention of cross contamination
• CEN/TR 15369:2006 Postal services – Quality of service – Guide for the implementation of EN 14534 Measurement of the transit time of end-to-end services for bulk mail
• CEN/TR 15371:2013 Safety of toys – Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8
• CEN/TR 15438:2007 Plastics piping systems – Guidance for coding of products and their intended uses
• CEN/TR 15444:2006 Transportable gas cylinders – Gas cylinders conforming to the TPED to be used for PED applications – Applicability and justifications
• CEN/TR 15481:2006 Welding of reinforcing steel – Tack weldability – Test methods and performance requirements
• CEN/TR 15545:2006 Guide to the use of EN 545
• CEN/TR 15547:2007 Workplace atmospheres – Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
• CEN/TR 15563:2007 Temporary works equipment – Recommendations for achieving health and safety
• CEN/TR 15589:2007 Non destructive testing – Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
• CEN/TR 15592:2007 Health services – Quality management systems – Guide for the use of EN ISO 9004:2000 in health services for performance improvement
• CEN/TR 15601:2012 Hygrothermal performance of buildings – Resistance to wind – driven rain of roof coverings with discontinuously laid small elements – Test methods
• CEN/TR 15623:2008 Food processing machinery – Route map – Materials for food area
• CEN/TR 15642:2011 Unified tests procedures for the tests of EN 3-7:2004+A1:2007
• CEN/TR 15677:2008 Fly ash obtained from co-combustion – A report on the situation in Europe
• CEN/TR 15678:2008 Concrete – Release of regulated dangerous substances into soil, groundwater and surface water – Test method for new or unapproved constituents of concrete and for production concretes
• CEN/TR 15697:2008 Cement – Performance testing for sulfate resistance – State of the art report
• CEN/TR 15738:2008 Petroleum products – Heating fuels – Need, feasibility and required deliverables for a common European specification
• CEN/TR 15745:2008 Liquid petroleum products – Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method – Round Robin research report
• CEN/TR 15760:2010 Heat meters – Checklist documenting the relationship between the Directive 2004/22/EC (MID) and EN 1434:2007
• CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete – Guidelines for the application of EN 450-2
• CEN/TR 15868:2009 Survey of national requirements used in conjunction with EN 206-1:2000
• CEN/TR 15874:2009 Railway applications – Noise emission – Road test of standard for rail roughness measurement EN 15610:2009
• CEN/TR 15894:2009 Building hardware – Door fittings for use by children, elderly and disabled people in domestic and public buildings – A guide for specifiers
• CEN/TR 1591-5:2012 Flanges and their joints – Design rules for gasketed circular flange connections – Part 5: Calculation method for full face gasketed joints
• CEN/TR 15951:2009 Pyrotechnic articles – Fireworks, category 4 – Overview of harmonized standards that will be developed by CEN/TC 212/WG 2
• CEN/TR 15952:2009 Pyrotechnic articles – Theatrical pyrotechnic articles, categories T1 and T2 – Overview of harmonized standards that will be developed by CEN/TC 212/WG 3
• CEN/TR 15953:2009 Pyrotechnic articles – Other pyrotechnic articles, category P1 and P2 – Overview of harmonized standards that will be developed by CEN/TC 212/WG 5
• CEN/TR 15970:2009 Pyrotechnic articles – Pyrotechnic articles for vehicles – Overview on work program for EN standards to be developed by CEN/TC 212 WG 4
• CEN/TR 15983:2010 Stationary source emissions – Guidance on the application of EN 14181:2004
• CEN/TR 15985:2010 Thermal insulating products – Factory made products of expanded polystyrene (EPS) – Voluntary certification of the raw material
• CEN/TR 15993:2013 Automotive fuels – Ethanol (E85) automotive fuel – Background to the parameters required and their respective limits and determination
• CEN/TR 16013-1:2010 Workplace exposure – Guide for the use of direct-reading instruments for aerosol monitoring – Part 1: Choice of monitor for specific applications
• CEN/TR 16013-2:2010 Workplace exposure – Guide for the use of direct-reading instruments for aerosol monitoring – Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
• CEN/TR 16013-3:2012 Workplace exposure – Guide for the use of direct-reading instruments for aerosol monitoring – Part 3: Evaluation of airborne particle concentrations using photometers
• CEN/TR 16015:2010 Hardware for furniture – Terms for locking mechanisms
• CEN/TR 16017:2010 Guide to the use of EN 598
• CEN/TR 16040:2010 Electronic fee collection – Requirements for urban dedicated short-range communication
• CEN/TR 16041:2010 Bicycles – Replies to requests for interpretation of EN 14764
• CEN/TR 16042:2010 Bicycles – Replies to requests for interpretation of EN 14765
• CEN/TR 16043:2010 Bicycles – Replies to requests for interpretation of EN 14766
• CEN/TR 16044:2010 Bicycles – Replies to requests for interpretation of EN 14781
• CEN/TR 16059:2010 Food analysis – Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
• CEN/TR 16061:2010 Gas meters – Smart Gas Meters
• CEN/TR 16092:2011 Electronic fee collection – Requirements for pre-payment systems
• CEN/TR 16099:2010 Fire service equipment – Summary of water pressures specified in published CEN/TC 192 standards
• CEN/TR 16110:2010 Characterization of waste – Guidance on the use of ecotoxicity tests applied to waste
• CEN/TR 16130:2011 Characterization of waste – On-site verification
• CEN/TR 16142:2011 Concrete – A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
• CEN/TR 16148:2011 Head and neck impact, burn and noise injury criteria – A Guide for CEN helmet standards committees
• CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
• CEN/TR 16151:2011 Water quality – Guidance on the design of Multimetric Indices
• CEN/TR 16152:2011 Electronic fee collection – Personalisation and mounting of first mount OBE
• CEN/TR 16176:2011 Characterization of waste – Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification
• CEN/TR 16184:2011 Characterization of Waste – State-of-the-art document – Analysis of eluates
• CEN/TR 16219:2011 Electronic Fee Collection – Value added services based on EFC on-board equipment
• CEN/TR 16227:2011 Liquid petroleum products – Bio-lubricants – Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
• CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
• CEN/TR 16243:2011 Ambient air quality – Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters
• CEN/TR 16269:2011 Ambient air – Guide for the measurement of anions and cations in PM2,5
• CEN/TR 16298:2011 Textiles and textile products – Smart textiles – Definitions, categorisation, applications and standardization needs
• CEN/TR 16303-1:2012 Road restraint systems – Guidelines for computational mechanics of crash testing against vehicle restraint system – Part 1: Common reference information and reporting
• CEN/TR 16303-2:2012 Road restraint systems – Guidelines for computational mechanics of crash testing against vehicle restraint system – Part 2: Vehicle Modelling and Verification
• CEN/TR 16303-3:2012 Road restraint systems – Guidelines for computational mechanics of crash testing against vehicle restraint system – Part 3: Test Item Modelling and Verification
• CEN/TR 16303-4:2012 Road restraint systems – Guidelines for computational mechanics of crash testing against vehicle restraint system – Part 4: Validation Procedures
• CEN/TR 16332:2012 Non-destructive testing – Interpretation of EN ISO/IEC 17024 for NDT personnel certification application
• CEN/TR 16338:2012 Foodstuffs – Detection of food allergens – Template for supplying information about immunological methods and molecular biological methods
• CEN/TR 16349:2012 Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
• CEN/TR 16353:2012 Packaging – Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children
• CEN/TR 16355:2012 Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption
• CEN/TR 16363:2012 Characterization of waste – Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries
• CEN/TR 16364:2012 Influence of materials on water intended for human consumption – Influence due to migration – Prediction of migration from organic materials using mathematical modelling
• CEN/TR 16365:2012 Characterization of waste – Sampling of waste from extractive industries
• CEN/TR 16366:2012 Liquid petroleum products – Middle distillates and fatty acid methyl ester (FAME) fuels and blends – Round Robin report on applicability of Rapid Small Scale Oxidation Test method
• CEN/TR 16369:2012 Use of control charts in the production of concrete
• CEN/TR 16376:2012 Characterization of waste – Overall guidance document for characterization of waste from the extractive industries
• CEN/TR 16386:2013 Dentistry – Guidelines for handling methacrylate-based materials in the dental laboratory
• CEN/TR 16389:2012 Automotive fuels – Paraffinic diesel fuel and blends – Background to the parameters required and their respective limits and determination
• CEN/TR 16391:2012 Mechanical vibration and shock – Hand-transmitted vibration – Influence of coupling forces at the hand-machine interface on exposure evaluation
• CEN/TR 16395:2012 Gas Infrastructure – CEN/TC 234 Pressure Definitions – Guideline Document
• CEN/TR 16396:2012 Playground equipment for children – Replies to requests for interpretation of EN 1176:2008 and its parts
• CEN/TR 16405:2013 Intelligent transport systems – ESafety – ECall additional optional data set for heavy goods vehicles eCall
• CEN/TR 16410:2012 Construction products – Assessment of release of dangerous substances – Barriers to use – Extension to CEN/TR 15855 Barriers to trade
• CEN/TR 16411:2012 Child use and care articles – 2012 compiled interpretations of CEN/TC 252 standards
• CEN/TR 16420:2012 Analytical Method for the Analysis of Propiconazole in treated Wood Samples
• CEN/TR 16422:2012 Classification of thermoregulatory properties
• CEN/TR 16427:2013 Intelligent transport systems – Public transport – Traveller Information for Visually Impaired People (TI-VIP)
• CEN/TR 16435:2012 Liquid petroleum products – Oxygenates blending in line with actual EN 228 requirements
• CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 – Fly ash for concrete
• CEN/TR 16446:2012 Textiles – Safety of children’s clothing – Guidance on the use of EN 14682:2007 Cords and drawstrings on children’s clothing – Specifications
• CEN/TR 16467:2013 Playground equipment accessible for all children
• CEN/TR 16468:2013 Food analysis – Determination of pesticide residues by GC-MS – Retention times, mass spectrometric parameters and detector response information
• CEN/TR 16470:2013 Environmental aspects of ductile iron pipe systems for water and sewerage applications
• CEN/TR 16514:2013 Automotive fuels – Unleaded petrol containing more than 3,7 % (m/m) oxygen – Roadmap, test methods, and requirements for E10+ petrol
• CEN/TR 16557:2013 Automotive fuels – High FAME diesel fuel blends (B11 – B30) – Background to the parameters required and their respective limits and determination
• CEN/TR 16563:2013 Principles of the equivalent durability procedure
• CEN/TR 16569:2013 Automotive fuels – Assessing the effects of E10 petrol on vehicle emissions and performance
• CEN/TR 1749:2009 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
• CEN/TR 196-4:2007 Methods of testing cement – Part 4: Quantitative determination of constituents
• CEN/TR 581-4:2005 Outdoor furniture – Seating and tables for camping, domestic and contract use – Part 4: Requirements and test methods for durability under the influence of climatic conditions
• CEN/TR 614-3:2010 Safety of machinery – Part 3: Ergonomic principles for the design of mobile machinery
• CEN/TR 764-6:2012 Pressure equipment – Part 6: Structure and content of operating instructions
• CEN/TR 81-10:2008 Safety rules for the construction and installation of lifts – Basics and interpretrations – Part 10: System of the EN 81 series of standards
• CEN/TR 852:2010 Plastics piping systems for the transport of water intended for human consumption – Migration assessment – Guidance on the interpretation of laboratory derived migration values
• CEN/TS 1071-11:2005 Advanced technical ceramics – Methods of test for ceramic coatings – Part 11: Determination of internal stress by the Stoney formula
• CEN/TS 1071-8:2004 Advanced technical ceramics – Methods of test for ceramic coatings – Part 8: Rockwell indentation test for evaluation of adhesion
• CEN/TS 1099:2007 Plywood – Biological durability – Guidance for the assessment of plywood for use in different use classes
• CEN/TS 12037:2003 Wood preservatives – Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact – Horizontal lap-joint method
• CEN/TS 12200-2:2003 Plastics rainwater piping systems for above ground external use – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity
• CEN/TS 12201-7:2003 Plastics piping systems for water supply – Polyethylene (PE) – Part 7: Guidance for the assessment of conformity
• CEN/TS 12390-10:2007 Testing hardened concrete – Part 10: Determination of the relative carbonation resistance of concrete
• CEN/TS 12390-11:2010 Testing hardened concrete – Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
• CEN/TS 12390-9:2006 Testing hardened concrete – Part 9: Freeze-thaw resistance – Scaling
• CEN/TS 12872:2007 Wood-based panels – Guidance on the use of load-bearing boards in floors, walls and roofs
• CEN/TS 13130-10:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 10: Determination of acrylamide in food simulants
• CEN/TS 13130-16:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 16: Determination of caprolactam and caprolactam salt in food simulants
• CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 17: Determination of carbonyl chloride in plastics
• CEN/TS 13130-18:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 18: Determination of 1,2-dihydroxybenzene, 1,3-dihydroxybenzene, 1,4-dihydroxybenzene, 4,4′-dihydroxybenzophenone and 4,4′dihydroxybiphenyl in food simulants
• CEN/TS 13130-21:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 21: Determination of ethylenediamine and hexamethylenediamine in food simulants
• CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 22: Determination of ethylene oxide and propylene oxide in plastics
• CEN/TS 13130-23:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 23: Determination of formaldehyde and hexamethylenetetramine in food simulants
• CEN/TS 13130-24:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 24: Determination of maleic acid and maleic anhydride in food simulants
• CEN/TS 13130-25:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 25: Determination of 4-methyl-1-pentene in food simulants
• CEN/TS 13130-26:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 26: Determination of 1-octene and tetrahydrofuran in food simulants
• CEN/TS 13130-27:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 27: Determination of 2,4,6-triamino-1,3,5-triazine in food simulants
• CEN/TS 13130-28:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 28: Determination of 1,1,1-trimethylolpropane in food simulants
• CEN/TS 13130-9:2005 Materials and articles in contact with foodstuffs – Plastics substances subject to limitation – Part 9: Determination of acetic acid, vinyl ester in food simulants
• CEN/TS 1317-8:2012 Road restraint systems – Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
• CEN/TS 13244-7:2003 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage – Polyethylene (PE) – Part 7: Guidance for the assessment of conformity
• CEN/TS 13381-1:2005 Test methods for determining the contribution to the fire resistance of structural members – Part 1: Horizontal protective membranes
• CEN/TS 13388:2013 Copper and copper alloys – Compendium of compositions and products
• CEN/TS 13763-27:2003 Explosives for civil uses – Detonators and relays – Part 27: Definitions, methods and requirements for electronic initiation systems
• CEN/TS 13810-2:2003 Wood-based panels – Floating floors – Part 2: Test methods
• CEN/TS 13853:2003 Swap bodies for combined transport – Stackable swap bodies type C 745-S16 – Dimensions, design requirements and testing
• CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for assessment of conformity
• CEN/TS 14159:2007 Textile floor coverings – Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
• CEN/TS 14472-1:2003 Resilient, textile and laminate floor coverings – Design, preparation and installation – Part 1: General
• CEN/TS 14472-2:2003 Resilient, textile and laminate floor coverings – Design, preparation and installation – Part 2: Textile floor coverings
• CEN/TS 14472-3:2003 Resilient, textile and laminate floor coverings – Design, preparation and installation – Part 3: Laminate floor coverings
• CEN/TS 14472-4:2003 Resilient, textile and laminate floor coverings – Design, preparation and installation – Part 4: Resilient floor coverings
• CEN/TS 1451-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene (PP) – Part 2: Guidance for the assessment of conformity
• CEN/TS 14541:2013 Plastics pipes and fittings – Characteristics for utilisation of non-virgin PVC-U, PP and PE materials
• CEN/TS 1455-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Acrylonitrile-butadiene-styrene (ABS) – Part 2: Guidance for the assessment of conformity
• CEN/TS 1456-2:2003 Plastics piping systems for buried and above-ground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity
• CEN/TS 14578:2003 Plastics piping systems for water supply or drainage and sewerage – Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) – Recommended practice for installation
• CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Guidance for the assessment of conformity
• CEN/TS 14754-1:2007 Curing compounds – Test methods – Part 1: Determination of water retention efficiency of common curing compounds
• CEN/TS 14758-2:2007 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifier(s) (PP-MD) – Part 2: Guidance for the assessment of conformity
• CEN/TS 14758-3:2006 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifier(s) (PP-MD) – Part 3: Guidance for installation
• CEN/TS 14807:2004 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) – Guidance for the structural analysis of buried GRP-UP pipelines
• CEN/TS 14821-7:2003 Traffic and Travel Information (TTI) – TTI messages via cellular networks – Part 7: Performance requirements for onboard positioning
• CEN/TS 14821-8:2003 Traffic and Travel Information (TTI) – TTI messages via cellular networks – Part 8: GSM-specific parameters
• CEN/TS 14940-1:2009 Copper and copper alloys – Determination of chromium content – Part 1: Titrimetric method
• CEN/TS 14966:2005 Wood-based panels – Small scale indicative test methods for certain mechanical properties
• CEN/TS 14993:2005 Swap bodies for combined transport – Stackable swap bodies type A 1371 – Dimensions, design requirements and testing
• CEN/TS 15022-2:2009 Copper and copper alloys – Determination of tin content – Part 2: Spectrophotometric method
• CEN/TS 15053:2005 Non-destructive testing – Recommendations for discontinuities-types in test specimens for examination
• CEN/TS 15082:2005 Wood preservatives – Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber – Field test
• CEN/TS 15083-1:2005 Durability of wood and wood-based products – Determination of the natural durability of solid wood against wood-destroying fungi, test methods – Part 1: Basidiomycetes
• CEN/TS 15083-2:2005 Durability of wood and wood-based products – Determination of the natural durability of solid wood against wood-destroying fungi, test methods – Part 2: Soft rotting micro-fungi
• CEN/TS 15117:2005 Guidance on direct and extended application
• CEN/TS 15119-1:2008 Durability of wood and wood-based products – Determination of emissions from preservative treated wood to the environment – Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) – Laboratory method
• CEN/TS 15119-2:2012 Durability of wood and wood-based products – Determination of emissions from preservative treated wood to the environment – Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) – Laboratory method
• CEN/TS 15149-3:2006 Solid biofuels – Methods for the determination of particle size distribution – Part 3: Rotary screen method
• CEN/TS 1519-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure – Polyethylen (PE) – Part 2: Guidance for the assessment of conformity
• CEN/TS 15223:2008 Plastics piping systems – Validated design parameters of buried thermoplastics piping systems
• CEN/TS 15279:2006 Workplace exposure – Measurement of dermal exposure – Principles and methods
• CEN/TS 15293:2011 Automotive fuels – Ethanol (E85) automotive fuel – Requirements and test methods
• CEN/TS 15397:2006 Wood preservatives – Method for natural preconditioning out of ground contact of treated wood specimens prior to biological laboratory test
• CEN/TS 15398:2008 Resilient, textile and laminate floor coverings – Floor covering standard symbols
• CEN/TS 15414-1:2010 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 1: Determination of total moisture by a reference method
• CEN/TS 15414-2:2010 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 2: Determination of total moisture content by a simplified method
• CEN/TS 15430-2:2012 Winter and road service area maintenance equipment – Data acquisition and transmission – Part 2: Protocol for data transfer between information supplier and client application server
• CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
• CEN/TS 15480-1:2012 Identification card systems – European Citizen Card – Part 1: Physical, electrical and transport protocol characteristics
• CEN/TS 15480-2:2012 Identification card systems – European Citizen Card – Part 2: Logical data structures and security services
• CEN/TS 15480-3:2010 Identification card systems – European Citizen Card – Part 3: European Citizen Card Interoperability using an application interface
• CEN/TS 15480-4:2012 Identification card systems – European Citizen Card – Part 4: Recommendations for European Citizen Card issuance, operation and use
• CEN/TS 15480-5:2013 Identification card systems – European Citizen Card – Part 5: General Introduction
• CEN/TS 15548-1:2011 Thermal insulation products for building equipment and industrial installations – Determination of thermal resistance by means of the guarded hot plate method – Part 1: Measurements at elevated temperatures from 100 °C to 850 °C
• CEN/TS 1555-7:2013 Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Part 7: Guidance for the assessment of conformity
• CEN/TS 15656:2009 Copper and copper alloys – Determination of phosphorus content – Spectrophotometric method
• CEN/TS 15675:2007 Air quality – Measurement of stationary source emissions – Application of EN ISO/IEC 17025:2005 to periodic measurements
• CEN/TS 15703-1:2009 Copper and copper alloys – Determination of manganese content – Part 1: Spectrophotometric method
• CEN/TS 15730:2008 Earth-moving machinery – Guidelines for assessment of exposure to whole-body vibration of ride-on machines – Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006)
• CEN/TS 15901-10:2009 Road and airfield surface characteristics – Part 10: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK): the Skiddometer BV-8
• CEN/TS 15901-7:2009 Road and airfield surface characteristics – Part 7: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG): the GripTester®
• CEN/TS 15901-8:2009 Road and airfield surface characteristics – Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM
• CEN/TS 15901-9:2009 Road and airfield surface characteristics – Part 9: Procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD): DWWNL skid resistance trailer
• CEN/TS 1591-3:2007 Flanges and their joints – Design rules for gasketed circular flange connections – Part 3: Calculation method for metal to metal contact type flanged joint
• CEN/TS 15916-1:2011 Copper and copper alloys – Determination of tellurium content – Part 1: Low tellurium content – Flame atomic absorption spectrometric method (FAAS)
• CEN/TS 15940:2012 Automotive fuels – Paraffinic diesel fuel from synthesis or hydrotreatment – Requirements and test methods
• CEN/TS 16010:2013 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
• CEN/TS 16011:2013 Plastics – Recycled plastics – Sample preparation
• CEN/TS 16115-1:2011 Ambient air quality – Measurement of bioaerosols – Part 1: Determination of moulds using filter sampling systems and culture-based analyses
• CEN/TS 16134:2011 Chimney terminals – General requirements and material independent test methods
• CEN/TS 16137:2011 Plastics – Determination of bio-based carbon content
• CEN/TS 16157-1:2011 Intelligent transport systems – DATEX II data exchange specifications for traffic management and information – Part 1: Context and framework
• CEN/TS 16157-2:2011 Intelligent transport systems – DATEX II data exchange specifications for traffic management and information – Part 2: Location referencing
• CEN/TS 16157-3:2011 Intelligent transport systems – DATEX II data exchange specifications for traffic management and information – Part 3: Situation Publication
• CEN/TS 16187:2011 Foodstuffs – Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children – HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization
• CEN/TS 16209:2011 Furniture – Classification for properties for furniture surfaces
• CEN/TS 16229:2011 Characterization of waste – Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds
• CEN/TS 16233-1:2011 Foodstuffs – HPLC method for the determination of xanthophylls in fish flesh – Part 1: Determination of astaxanthin and canthaxanthin
• CEN/TS 16233-2:2011 Foodstuffs – HPLC method for the determination of xanthophylls in fish flesh – Part 2: Identification of the enantiomer ratio of astaxanthin
• CEN/TS 16295:2012 Plastics – Declaration of the bio-based carbon content
• CEN/TS 16305:2012 Liming materials – Determination of the dust content of granular liming materials before and after simulated handling conditions
• CEN/TS 16331:2012 Electronic fee collection – Interoperable application profiles for autonomous systems
• CEN/TS 16358:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of air inclusions/microfoam in coating films
• CEN/TS 16359:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of knot staining resistance of wood coatings
• CEN/TS 16360:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of film extensibility by indentation of a coating on a wooden substrate
• CEN/TS 16371:2012 Guidelines for implementors of EN 15744 and EN 15907
• CEN/TS 16375:2013 Liming materials – Determination of the amount of residual finely ground carbonate in soils – Volumetric method
• CEN/TS 16384:2012 Synthetic sport systems – Leaching test
• CEN/TS 16398:2012 Plastics – Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics – Data sheet
• CEN/TS 16406:2013 Intelligent transport systems – Public transport – Indirect Fulfilment for Rail
• CEN/TS 16415:2013 Personal fall protection equipment – Anchor devices – Recommendations for anchor devices for use by more than one person simultaneously
• CEN/TS 16428:2012 Biometrics Interoperability profiles – Best Practices for slap tenprint captures
• CEN/TS 16429:2013 Stationary source emissions – Sampling and determination of hydrogen chloride content in ducts and stacks – Infrared analytical technique
• CEN/TS 16439:2013 Electronic fee collection – Security framework
• CEN/TS 16450:2013 Ambient air – Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
• CEN/TS 16454:2013 Intelligent transport systems – ESafety – ECall end to end conformance testing
• CEN/TS 16490:2013 Fertilizers – Comparison of the CEN/TC 260/WG 7 ring test results with tolerances given in the Regulation (EC) Nr 2003/2003 Annex II and conclusions
• CEN/TS 16498:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of tannin staining
• CEN/TS 16499:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Resistance to blocking of paints and varnishes on wood
• CEN/TS 1793-4:2003 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 4: Intrinsic characteristics – In situ values of sound diffraction
• CEN/TS 1793-5:2003 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 5: Intrinsic characteristics – In situ values of sound reflection and airborne sound insulation
• CEN/TS 1852-2:2009 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 2: Guidance for the assessment of conformity
• CEN/TS 1852-3:2003 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 3: Guidance for installation
• CEN/TS 1852-3:2003/A1:2005 Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene (PP) – Part 3: Guidance for installation
• CEN/TS 54-14:2004 Fire detection and fire alarm systems – Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance
• CEN/TS 635-4:2007 Plywood – Classification by surface appearance – Part 4: Parameters of ability for finishing, guideline
• CEN/TS 772-22:2006 Methods of test for masonry units – Part 22: Determination of freeze/thaw resistance of clay masonry units
• CEN/TS 81-11:2011 Safety rules for the construction and installation of lifts – Basics and interpretations – Part 11: Interpretations related to EN 81 family of standards
• CEN/TS 81-76:2011 Safety rules for the construction and installation of lifts – Particular applications for passengers and goods passenger lifts – Part 76: Evacuation of disabled persons using lifts
• CEN/TS 81-83:2009 Safety rules for the construction and installation of lifts – Existing lifts – Part 83: Rules for the improvement of the resistance against vandalism
• CEN/TS 839:2008 Wood preservatives – Determination of the protective effectiveness against wood destroying basidiomycetes – Application by surface treatment
• CEN/TS 843-9:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 9: Method of test for edge-chip resistance
• CR 14245:2001 Guidelines for the application of EN 197-2 “Conformity Evaluation”
• CR 262:1991 Volatility of petrol
• CWA 15535-1:2006 Multi-application multi-issuer citizen card scheme standardisation – Part 1: Business model agreement
• CWA 15535-2:2006 Multi-application multi-issuer citizen card scheme standardisation – Part 2: Scheme architecture and implementation solution
• CWA 16180-1:2010 The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain – Part 1: Direction and Framework
• CWA 16180-2:2010 The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain – Part 2: Implementation Guide
• CWA 16180-3:2010 The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain – Part 3: Standards Landscape
• CWA 16464-3:2012 Electronic invoicing – Part 3: Conformance Criteria for Interoperability between Electronic Invoicing Services
• ECISS/TC 100 – General issues
• ECISS/TC 101 – Test methods for steel (other than chemical analysis)
• ECISS/TC 102 – Methods of chemical analysis for iron and steel
• ECISS/TC 105 – Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
• ECISS/TC 106 – Wire rod and wires
• ECISS/TC 110 – Steel tubes, and iron and steel fittings
• ECISS/TC 111 – Steel castings and forgings

-|1|-


top