STD-ASTM A XXXX

ASTM A | 1 | , ASTM B , ASTM C , ASTM D , ASTM E , ASTM F , ASTM G ,

[ ASTM A000 – A999 ]

• ASTM A1-00(2010) Standard Specification for Carbon Steel Tee Rails
• ASTM A2-02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
• ASTM A3-01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
• ASTM A6/A6M-13 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
• ASTM A20/A20M-11 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
• ASTM A20/A20M-RUS-11 Стандартная спецификация на общие требования к толстолистовой стали для сосудов, работающих под давлением
• ASTM A27/A27M-10 Standard Specification for Steel Castings, Carbon, for General Application
• ASTM A29/A29M-12 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
• ASTM A31-04(2009) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
• ASTM A34/A34M-06(2012) Standard Practice for Sampling and Procurement Testing of Magnetic Materials
• ASTM A36/A36M-12 Standard Specification for Carbon Structural Steel
• ASTM A36/A36M-SP-12 Especificación Normalizada para Acero al Carbono Estructural
• ASTM A47/A47M-99(2009) Standard Specification for Ferritic Malleable Iron Castings
• ASTM A48/A48M-03(2012) Standard Specification for Gray Iron Castings
• ASTM A49-12 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
• ASTM A53/A53M-12 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
• ASTM A53/A53M-SP-12 Especificación Normalizada para Tubos de Acero Negro e Inmersos en Caliente, Galvanizados, Soldados y Sin Costura
• ASTM A65-07(2013) Standard Specification for Steel Track Spikes
• ASTM A66-07(2013) Standard Specification for Steel Screw Spikes
• ASTM A67-00(2010) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
• ASTM A74-13a Standard Specification for Cast Iron Soil Pipe and Fittings
• ASTM A82/A82M-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
• ASTM A82/A82M-RUS-07 Стандартная спецификация на гладкую стальную проволоку для бетонной арматуры
• ASTM A82/A82M-SP-07 Especificación Normalizada para Alambre de Acero, Liso, para Refuerzo de Concreto
• ASTM A90/A90M-13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
• ASTM A99-03(2009) Standard Specification for Ferromanganese
• ASTM A100-07(2012) Standard Specification for Ferrosilicon
• ASTM A101-04(2009) Standard Specification for Ferrochromium
• ASTM A102-04(2009) Standard Specification for Ferrovanadium
• ASTM A105/A105M-12 Standard Specification for Carbon Steel Forgings for Piping Applications
• ASTM A106/A106M-11 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
• ASTM A106/A106M-RUS-11 Стандартная спецификация на бесшовные трубы из углеродистой стали для применения при высоких температурах
• ASTM A108-07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
• ASTM A109/A109M-08 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
• ASTM A111-99a(2009) Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
• ASTM A116-11 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
• ASTM A121-13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
• ASTM A123/A123M-12 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
• ASTM A125-96(2007) Standard Specification for Steel Springs, Helical, Heat-Treated
• ASTM A126-04(2009) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
• ASTM A128/A128M-93(2012) Standard Specification for Steel Castings, Austenitic Manganese
• ASTM A131/A131M-08 Standard Specification for Structural Steel for Ships
• ASTM A132-04(2009) Standard Specification for Ferromolybdenum
• ASTM A134-96(2012) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
• ASTM A135/A135M-09 Standard Specification for Electric-Resistance-Welded Steel Pipe
• ASTM A139/A139M-04(2010) Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
• ASTM A143/A143M-07 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
• ASTM A144-04(2009) Specification for Ferrotungsten
• ASTM A146-04(2009) Standard Specification for Molybdenum Oxide Products
• ASTM A148/A148M-08 Standard Specification for Steel Castings, High Strength, for Structural Purposes
• ASTM A153/A153M-09 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
• ASTM A159-83(2011) Standard Specification for Automotive Gray Iron Castings
• ASTM A167-99(2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
• ASTM A176-99(2009) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
• ASTM A178/A178M-02(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
• ASTM A179/A179M-90a(2012) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
• ASTM A181/A181M-12 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
• ASTM A182/A182M-13 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
• ASTM A183-03(2009) Standard Specification for Carbon Steel Track Bolts and Nuts
• ASTM A184/A184M-06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
• ASTM A185/A185M-07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
• ASTM A185/A185M-RUS-07 Стандартная спецификация на стальную сварную гладкую проволочную арматуру для бетона
• ASTM A185/A185M-SP-07 Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero Liso, para Concreto
• ASTM A192/A192M-02(2012) Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
• ASTM A193/A193M-12b Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
• ASTM A194/A194M-12a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
• ASTM A197/A197M-00(2011) Standard Specification for Cupola Malleable Iron
• ASTM A203/A203M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
• ASTM A204/A204M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
• ASTM A209/A209M-03(2012) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
• ASTM A210/A210M-02(2012) Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
• ASTM A213/A213M-13 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
• ASTM A214/A214M-96(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
• ASTM A216/A216M-12 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
• ASTM A217/A217M-12 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
• ASTM A220/A220M-99(2009) Standard Specification for Pearlitic Malleable Iron
• ASTM A225/A225M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
• ASTM A227/A227M-06(2011) Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
• ASTM A228/A228M-07 Standard Specification for Steel Wire, Music Spring Quality
• ASTM A229/A229M-12 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
• ASTM A230/A230M-05(2011)e1 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
• ASTM A231/A231M-10 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
• ASTM A232/A232M-05(2011)e1 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
• ASTM A234/A234M-11a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
• ASTM A239-95(2009)e1 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
• ASTM A240/A240M-13a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
• ASTM A242/A242M-13 Standard Specification for High-Strength Low-Alloy Structural Steel
• ASTM A242/A242M-SP-13 Especificación normalizada para Acero estructural de alta resistencia y baja aleación
• ASTM A247-10 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
• ASTM A249/A249M-10a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• ASTM A250/A250M-05(2009) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
• ASTM A252-10 Standard Specification for Welded and Seamless Steel Pipe Piles
• ASTM A254/A254M-12 Standard Specification for Copper-Brazed Steel Tubing
• ASTM A255-10 Standard Test Methods for Determining Hardenability of Steel
• ASTM A255-RUS-10 Стандартные методы определения закаливаемости стали
• ASTM A262-13 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
• ASTM A263-12 Standard Specification for Stainless Chromium Steel-Clad Plate
• ASTM A264-12 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
• ASTM A265-12 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
• ASTM A266/A266M-11 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
• ASTM A268/A268M-10 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
• ASTM A269-10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
• ASTM A270/A270M-10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
• ASTM A275/A275M-08(2013) Standard Practice for Magnetic Particle Examination of Steel Forgings
• ASTM A276-13 Standard Specification for Stainless Steel Bars and Shapes
• ASTM A278/A278M-01(2011) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
• ASTM A283/A283M-12a Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
• ASTM A285/A285M-12 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
• ASTM A285/A285M-RUS-12 Стандартные технические условия на плиты для сосудов под давлением из углеродистой стали с низким и средним пределом прочности на растяжение
• ASTM A288-91(2013) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
• ASTM A289/A289M-97(2013) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
• ASTM A290/A290M-05(2010) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
• ASTM A291/A291M-05(2010) Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
• ASTM A295/A295M-09 Standard Specification for High-Carbon Anti-Friction Bearing Steel
• ASTM A297/A297M-10 Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
• ASTM A299/A299M-09 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
• ASTM A302/A302M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
• ASTM A304-11 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
• ASTM A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
• ASTM A308/A308M-10 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
• ASTM A309-01(2012) Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
• ASTM A311/A311M-04(2010) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
• ASTM A312/A312M-13a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
• ASTM A313/A313M-10e1 Standard Specification for Stainless Steel Spring Wire
• ASTM A314-13 Standard Specification for Stainless Steel Billets and Bars for Forging
• ASTM A319-71(2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
• ASTM A320/A320M-11a Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
• ASTM A320/A320M-RUS-11a Стандартные технические условия на болтовые соединения из легированной и нержавеющей стали для эксплуатации в условиях низких температур
• ASTM A322-13 Standard Specification for Steel Bars, Alloy, Standard Grades
• ASTM A323-05(2010) Standard Specification for Ferroboron
• ASTM A324-08(2013) Standard Specification for Ferrotitanium
• ASTM A325M-13 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
• ASTM A325-10e1 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
• ASTM A327/A327M-11 Standard Test Methods for Impact Testing of Cast Irons
• ASTM A328/A328M-13 Standard Specification for Steel Sheet Piling
• ASTM A333/A333M-11 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
• ASTM A333/A333M-RUS-11 Стандартные технические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур
• ASTM A334/A334M-04a(2010) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
• ASTM A334/A334M-RUS-04a(2010) Cтандартная спецификация на бесшовные и сварные трубы из углеродистой и легированной стали для использования при низких температурах
• ASTM A335/A335M-11 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
• ASTM A335/A335M-RUS-11 Стандартная спецификация на бесшовные трубы из ферритной легированной стали для высокотемпературных условий эксплуатации
• ASTM A336/A336M-10a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
• ASTM A338-84(2009) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
• ASTM A340-03a(2011) Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
• ASTM A341/A341M-00(2011)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
• ASTM A342/A342M-04(2012) Standard Test Methods for Permeability of Feebly Magnetic Materials
• ASTM A343/A343M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
• ASTM A345-09 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
• ASTM A348/A348M-05(2011) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
• ASTM A350/A350M-12 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
• ASTM A350/A350M-RUS-12 Стандартная спецификация на поковки из углеродистой и низколегированной стали, требующие испытаний на ударную вязкость для деталей трубопровода
• ASTM A351/A351M-13a Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
• ASTM A352/A352M-06(2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
• ASTM A353/A353M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
• ASTM A354-11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A355-89(2012) Standard Specification for Steel Bars, Alloys, for Nitriding
• ASTM A356/A356M-11 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
• ASTM A358/A358M-12 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
• ASTM A363-03(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
• ASTM A367-11 Standard Test Methods of Chill Testing of Cast Iron
• ASTM A368-95a(2009) Standard Specification for Stainless Steel Wire Strand
• ASTM A369/A369M-11 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
• ASTM A370-12a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
• ASTM A370-RUS-12a Стандартные методы испытаний и определения механических характеристик стальных изделий
• ASTM A372/A372M-12 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
• ASTM A376/A376M-13 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
• ASTM A377-03(2008)e1 Standard Index of Specifications for Ductile-Iron Pressure Pipe
• ASTM A380/A380M-13 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
• ASTM A381-96(2012) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
• ASTM A384/A384M-07(2013) Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
• ASTM A385/A385M-11 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
• ASTM A387/A387M-11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
• ASTM A388/A388M-11 Standard Practice for Ultrasonic Examination of Steel Forgings
• ASTM A388/A388M-RUS-11 Стандартное практическое руководство по ультразвуковой дефектоскопии стальных поковок
• ASTM A389/A389M-10 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
• ASTM A390-06(2011) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
• ASTM A391/A391M-07(2012) Standard Specification for Grade 80 Alloy Steel Chain
• ASTM A392-11a Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
• ASTM A394-08e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
• ASTM A395/A395M-99(2009) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
• ASTM A400-69(2012) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
• ASTM A401/A401M-10 Standard Specification for Steel Wire, Chromium-Silicon Alloy
• ASTM A403/A403M-13 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
• ASTM A407-07(2013) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
• ASTM A409/A409M-09 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
• ASTM A411-08(2013) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
• ASTM A413/A413M-07(2012) Standard Specification for Carbon Steel Chain
• ASTM A414/A414M-13 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
• ASTM A416/A416M-12a Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
• ASTM A418/A418M-10 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
• ASTM A420/A420M-10a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
• ASTM A420/A420M-RUS-10a Стандартные технические условия на трубные фитинги из кованой углеродистой и легированной стали для эксплуатации в условиях низких температур
• ASTM A421/A421M-10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
• ASTM A421/A421M-SP-10 Alambre de Acero Aliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado
• ASTM A423/A423M-09 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
• ASTM A424/A424M-09a Standard Specification for Steel, Sheet, for Porcelain Enameling
• ASTM A426/A426M-11a Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
• ASTM A427/A427M-10 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
• ASTM A428/A428M-10 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
• ASTM A434-06(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
• ASTM A435/A435M-90(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
• ASTM A435/A435M-RUS-90(2012) Стандартные технические условия на ультразвуковое испытание стальных плит методом прямого преобразователя
• ASTM A436-84(2011) Standard Specification for Austenitic Gray Iron Castings
• ASTM A437/A437M-12 Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
• ASTM A439-83(2009) Standard Specification for Austenitic Ductile Iron Castings
• ASTM A447/A447M-11 Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
• ASTM A449-10 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
• ASTM A450/A450M-10 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
• ASTM A451/A451M-06(2010) Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
• ASTM A453/A453M-12 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
• ASTM A455/A455M-12a Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
• ASTM A456/A456M-08(2013) Standard Specification for Magnetic Particle Examination of Large CrankshaftForgings
• ASTM A459-08(2013) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
• ASTM A460-11 Standard Specification for Copper-Clad Steel Wire Strand
• ASTM A463/A463M-10 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
• ASTM A466/A466M-07(2012) Standard Specification for Weldless Chain
• ASTM A467/A467M-07(2012) Standard Specification for Machine and Coil Chain
• ASTM A469/A469M-07(2012) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
• ASTM A470/A470M-05(2010) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
• ASTM A471/A471M-09 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
• ASTM A472/A472M-07(2012) Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
• ASTM A473-01(2009) Standard Specification for Stainless Steel Forgings
• ASTM A474-03(2013) Standard Specification for Aluminum-Coated Steel Wire Strand
• ASTM A475-03(2009)e1 Standard Specification for Zinc-Coated Steel Wire Strand
• ASTM A476/A476M-00(2009) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
• ASTM A478-97(2008) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
• ASTM A479/A479M-13a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
• ASTM A480/A480M-13 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
• ASTM A481-05(2010) Standard Specification for Chromium Metal
• ASTM A482/A482M-11 Standard Specification for Ferrochrome-Silicon
• ASTM A483/A483M-10 Standard Specification for Silicomanganese
• ASTM A484/A484M-13a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
• ASTM A485-09 Standard Specification for High Hardenability Antifriction Bearing Steel
• ASTM A487/A487M-93(2012) Standard Specification for Steel Castings Suitable for Pressure Service
• ASTM A488/A488M-12 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
• ASTM A489-12 Standard Specification for Carbon Steel Lifting Eyes
• ASTM A490-12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
• ASTM A490M-12 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
• ASTM A491-11 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
• ASTM A492-95(2009) Standard Specification for Stainless Steel Rope Wire
• ASTM A493-09 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
• ASTM A494/A494M-13 Standard Specification for Castings, Nickel and Nickel Alloy
• ASTM A495-06(2010) Standard Specification for Calcium-Silicon Alloys
• ASTM A496/A496M-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
• ASTM A497/A497M-07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
• ASTM A497/A497M-SP-07 Especificación Normalizada para Refuerzo Electrosoldado de Alambre de Acero, Corrugado, para Concreto
• ASTM A498-06 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
• ASTM A499-89(2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
• ASTM A500/A500M-10a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
• ASTM A500/A500M-RUS-10a Стандартные технические условия на холодногнутые, сварные и бесшовные круглые и профильные конструкционные трубы из углеродистой стали
• ASTM A500/A500M-SP-10a Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Frío, Electrosoldados y sin Costura, de forma Circular y no Circular
• ASTM A501-07 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
• ASTM A501-SP-07 Especificación Normalizada para Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados y sin Costura
• ASTM A502-03(2009) Standard Specification for Rivets, Steel, Structural
• ASTM A503/A503M-01(2011) Standard Specification for Ultrasonic Examination of Forged Crankshafts
• ASTM A504/A504M-08(2013) Standard Specification for Wrought Carbon Steel Wheels
• ASTM A505-12 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
• ASTM A506-12 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
• ASTM A507-12 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
• ASTM A508/A508M-05b(2010) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
• ASTM A510/A510M-13 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
• ASTM A511/A511M-12 Standard Specification for Seamless Stainless Steel Mechanical Tubing
• ASTM A512-06(2012) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
• ASTM A513/A513M-12 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
• ASTM A514/A514M-05(2009) Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
• ASTM A515/A515M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
• ASTM A516/A516M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
• ASTM A516/A516M-RUS-10 Стандартная спецификация на толстолистовую углеродистую сталь для сосудов, работающих под давлением для применения при умеренных и низких температурах
• ASTM A517/A517M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
• ASTM A518/A518M-99(2012) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
• ASTM A519-06(2012) Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
• ASTM A521/A521M-06(2011) Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
• ASTM A522/A522M-11 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
• ASTM A523-96(2012) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
• ASTM A524-96(2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
• ASTM A529/A529M-05(2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
• ASTM A529/A529M-RUS-05(2009) Стандартные технические условия на высокопрочную марганцево-углеродистую сталь конструкционного качества
• ASTM A530/A530M-12 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
• ASTM A531/A531M-13 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
• ASTM A532/A532M-10 Standard Specification for Abrasion-Resistant Cast Irons
• ASTM A533/A533M-09e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
• ASTM A534-09 Standard Specification for Carburizing Steels for Anti-Friction Bearings
• ASTM A534-RUS-09 Стандартная спецификация на науглероживание сталей для антифрикционных вкладышей подшипников
• ASTM A536-84(2009) Standard Specification for Ductile Iron Castings
• ASTM A537/A537M-08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
• ASTM A537/A537M-RUS-08 Стандартная спецификация на толстолистовую марганцевокремнистоуглеродистую термообработанную сталь для сосудов, работающих под давлением
• ASTM A540/A540M-11 Standard Specification for Alloy-Steel Bolting for Special Applications
• ASTM A541/A541M-05(2010) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
• ASTM A542/A542M-13 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
• ASTM A543/A543M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
• ASTM A550-06(2010) Standard Specification for Ferrocolumbium
• ASTM A551/A551M-08(2013) Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
• ASTM A553/A553M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
• ASTM A554-13 Standard Specification for Welded Stainless Steel Mechanical Tubing
• ASTM A555/A555M-05(2009) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
• ASTM A556/A556M-96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
• ASTM A560/A560M-12 Standard Specification for Castings, Chromium-Nickel Alloy
• ASTM A561-08 Standard Practice for Macroetch Testing of Tool Steel Bars
• ASTM A561-RUS-08 Стандартная методика контроля макроструктуры травлением для сортового проката из инструментальной стали
• ASTM A562/A562M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
• ASTM A563-07a Standard Specification for Carbon and Alloy Steel Nuts
• ASTM A563M-07 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
• ASTM A564/A564M-13 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
• ASTM A565/A565M-10 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
• ASTM A568/A568M-13 Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
• ASTM A571/A571M-01(2011) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
• ASTM A572/A572M-12a Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
• ASTM A573/A573M-05(2009) Standard Specification for Structural Carbon Steel Plates of Improved Toughness
• ASTM A574M-12 Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)
• ASTM A574-13 Standard Specification for Alloy Steel Socket-Head Cap Screws
• ASTM A575-96(2013)e1 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
• ASTM A576-90b(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
• ASTM A577/A577M-90(2012) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
• ASTM A578/A578M-07(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
• ASTM A579/A579M-04a(2009) Standard Specification for Superstrength Alloy Steel Forgings
• ASTM A579/A579M-RUS-04a(2009) Стандартная спецификация на поковки из сверхпрочной легированной стали
• ASTM A580/A580M-13a Standard Specification for Stainless Steel Wire
• ASTM A581/A581M-95b(2009) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
• ASTM A582/A582M-12e1 Standard Specification for Free-Machining Stainless Steel Bars
• ASTM A586-04a(2009)e1 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
• ASTM A587-96(2012) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
• ASTM A588/A588M-10 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
• ASTM A588/A588M-SP-10 Especificación Normalizada para Acero Estructural de Alta Resistencia y Baja Aleación, con Punto Mínimo de Fluencia de hasta 50 ksi [345 MPa], con Resistencia a la Corrosión Atmosférica
• ASTM A589/A589M-06(2012) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
• ASTM A592/A592M-10 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
• ASTM A595/A595M-11 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
• ASTM A596/A596M-95(2009)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
• ASTM A597-87(2010) Standard Specification for Cast Tool Steel
• ASTM A598/A598M-02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
• ASTM A599/A599M-07(2012) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
• ASTM A600-92a(2010) Standard Specification for Tool Steel High Speed
• ASTM A601/A601M-10 Standard Specification for Electrolytic Manganese Metal
• ASTM A602-94(2009) Standard Specification for Automotive Malleable Iron Castings
• ASTM A603-98(2009)e1 Standard Specification for Zinc-Coated Steel Structural Wire Rope
• ASTM A604/A604M-07(2012) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
• ASTM A606/A606M-09a Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
• ASTM A608/A608M-12 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
• ASTM A609/A609M-12 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
• ASTM A610-79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
• ASTM A612/A612M-12 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
• ASTM A615/A615M-12 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
• ASTM A615/A615M-SP-12 Especificación Normalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto
• ASTM A618/A618M-04(2010) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
• ASTM A623-11 Standard Specification for Tin Mill Products, General Requirements
• ASTM A623M-11 Standard Specification for Tin Mill Products, General Requirements [Metric]
• ASTM A624/A624M-03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
• ASTM A625/A625M-08 Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
• ASTM A626/A626M-03(2008)e1 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
• ASTM A627-03(2011) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
• ASTM A630-03(2009) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
• ASTM A632-04(2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
• ASTM A633/A633M-01(2011) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
• ASTM A633/A633M-RUS-01(2011) Стандартные технические условия на плиты из нормализованной высокопрочной низколегированной конструкционной стали
• ASTM A635/A635M-09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
• ASTM A635/A635M-RUS-09b Стандартные технические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную, углеродистую, конструкционную, высокопрочную низколегированную и высокопрочную низколегированную с улучшенной формуемостью, общие требования
• ASTM A636-08(2013) Standard Specification for Nickel Oxide Sinter
• ASTM A638/A638M-10 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
• ASTM A640-97(2009)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
• ASTM A641/A641M-09a Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
• ASTM A644-13 Standard Terminology Relating to Iron Castings
• ASTM A645/A645M-10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
• ASTM A646/A646M-06(2011) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
• ASTM A648-12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
• ASTM A649/A649M-10 Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
• ASTM A650/A650M-03(2008) Standard Specification for Tin Mill Products, Black Plate, Double Reduced
• ASTM A653/A653M-11 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
• ASTM A656/A656M-12ae1 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
• ASTM A657/A657M-03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
• ASTM A659/A659M-12 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
• ASTM A660/A660M-11 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
• ASTM A662/A662M-12 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
• ASTM A663/A663M-12 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
• ASTM A664-11 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
• ASTM A666-10 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
• ASTM A667/A667M-87(2012) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
• ASTM A668/A668M-13e1 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
• ASTM A671/A671M-10 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
• ASTM A671/A671M-RUS-10 Стандартные технические условия на стальную трубу, полученную электросваркой оплавлением, для температуры окружающей среды и пониженных температур
• ASTM A672/A672M-09 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
• ASTM A673/A673M-07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
• ASTM A673/A673M-RUS-07(2012) Стандартная спецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость
• ASTM A674-10 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
• ASTM A675/A675M-03(2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
• ASTM A675/A675M-RUS-03(2009) Стандартная спецификация на горячедеформируемую углеродистую сортовую сталь специального качества. Механические свойства
• ASTM A677-12 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
• ASTM A679/A679M-06(2012) Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
• ASTM A681-08 Standard Specification for Tool Steels Alloy
• ASTM A683-05(2010) Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
• ASTM A684/A684M-12 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
• ASTM A686-92(2010) Standard Specification for Tool Steel, Carbon
• ASTM A688/A688M-12 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
• ASTM A689-97(2013)e1 Standard Specification for Carbon and Alloy Steel Bars for Springs
• ASTM A690/A690M-07(2012) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
• ASTM A691/A691M-09 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
• ASTM A691/A691M-RUS-09 Стандартные технические условия на трубу из углеродистой и легированной стали, полученную электросваркой оплавлением, для эксплуатации в условиях высокого давления при высоких температурах
• ASTM A693-13 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
• ASTM A694/A694M-08 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
• ASTM A696-90a(2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
• ASTM A697/A697M-03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
• ASTM A698/A698M-07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
• ASTM A700-05 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
• ASTM A700-RUS-05 Стандартные методы упаковки, маркировки и погрузки стальных изделий при их отправке потребителю
• ASTM A701/A701M-10 Standard Specification for Ferromanganese-Silicon
• ASTM A702-89(2006) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
• ASTM A703/A703M-13 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
• ASTM A704/A704M-06(2011) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
• ASTM A705/A705M-13 Standard Specification for Age-Hardening Stainless Steel Forgings
• ASTM A706/A706M-09b Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
• ASTM A706/A706M-SP-09b Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto
• ASTM A707/A707M-10 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
• ASTM A709/A709M-13 Standard Specification for Structural Steel for Bridges
• ASTM A710/A710M-02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
• ASTM A710/A710M-RUS-02(2007) Стандартные технические условия на плиты из дисперсноупрочненной низкоуглеродистой никель-медь-хром-молибден-ниобиевой легированной конструкционной стали
• ASTM A711/A711M-07(2012) Standard Specification for Steel Forging Stock
• ASTM A712-07(2013) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
• ASTM A713-04(2010) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
• ASTM A713-RUS-04(2010) Стандартная спецификация на стальную проволоку, пружины из высокоуглеродистой стали, для термообрабатываемых деталей
• ASTM A714-99(2009)e1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
• ASTM A716-08 Standard Specification for Ductile Iron Culvert Pipe
• ASTM A717/A717M-12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
• ASTM A719/A719M-02(2007) Standard Test Method for Lamination Factor of Magnetic Materials
• ASTM A720/A720M-02(2011) Standard Test Method for Ductility of Nonoriented Electrical Steel
• ASTM A721/A721M-02(2011) Standard Test Method for Ductility of Oriented Electrical Steel
• ASTM A722/A722M-12 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
• ASTM A723/A723M-10 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
• ASTM A724/A724M-09 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
• ASTM A726-05(2010) Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
• ASTM A727/A727M-11 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
• ASTM A729/A729M-09e1 Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
• ASTM A732/A732M-09 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
• ASTM A733-03(2009)e1 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
• ASTM A734/A734M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
• ASTM A735/A735M-12 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
• ASTM A736/A736M-12 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel
• ASTM A737/A737M-09 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
• ASTM A738/A738M-12a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
• ASTM A739-90a(2012) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
• ASTM A740-98(2008) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
• ASTM A741-11e1 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
• ASTM A742/A742M-13 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
• ASTM A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
• ASTM A744/A744M-13 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
• ASTM A745/A745M-12 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
• ASTM A746-09 Standard Specification for Ductile Iron Gravity Sewer Pipe
• ASTM A747/A747M-12 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
• ASTM A748/A748M-87(2012) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
• ASTM A749/A749M-08 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
• ASTM A751-11 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
• ASTM A751-RUS-11 Стандартные методы испытаний, практические руководства и терминология для проведения химического анализа стальной продукции
• ASTM A753-08(2013) Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
• ASTM A754/A754M-11 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
• ASTM A755/A755M-11 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
• ASTM A756-09 Standard Specification for Stainless Anti-Friction Bearing Steel
• ASTM A757/A757M-10 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
• ASTM A758/A758M-10 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
• ASTM A759-10 Standard Specification for Carbon Steel Crane Rails
• ASTM A760/A760M-10 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
• ASTM A761/A761M-13 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
• ASTM A762/A762M-08 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
• ASTM A763-93(2009) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
• ASTM A764-07(2012) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
• ASTM A765/A765M-07(2012) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
• ASTM A767/A767M-09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
• ASTM A767/A767M-SP-09 Especificación Normalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo de Concreto
• ASTM A768/A768M-05(2010) Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
• ASTM A769/A769M-05(2010) Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
• ASTM A770/A770M-03(2012) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
• ASTM A770/A770M-RUS-03(2012) Стандартная спецификация по испытанию на растяжение в направлении толщины стальных листов для специального применения
• ASTM A772/A772M-00(2011)e1 Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
• ASTM A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
• ASTM A774/A774M-09 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
• ASTM A775/A775M-07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars
• ASTM A775/A775M-SP-07b Especificación Normalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi
• ASTM A778-01(2009)e1 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
• ASTM A779/A779M-12 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
• ASTM A780/A780M-09 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
• ASTM A781/A781M-13 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
• ASTM A786/A786M-05(2009) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
• ASTM A787/A787M-09 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
• ASTM A788/A788M-11 Standard Specification for Steel Forgings, General Requirements
• ASTM A789/A789M-13 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
• ASTM A790/A790M-13a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
• ASTM A792/A792M-10 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
• ASTM A793-96(2009) Standard Specification for Rolled Floor Plate, Stainless Steel
• ASTM A794/A794M-12 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
• ASTM A795/A795M-13 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
• ASTM A796/A796M-13 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
• ASTM A798/A798M-13 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
• ASTM A799/A799M-10 Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
• ASTM A800/A800M-10 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
• ASTM A801-09 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
• ASTM A802/A802M-95(2010)e1 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
• ASTM A803/A803M-12 Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
• ASTM A804/A804M-04(2009)e1 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
• ASTM A805/A805M-09 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
• ASTM A807/A807M-02(2008) Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
• ASTM A809-08(2013) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
• ASTM A810-01(2009)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
• ASTM A810-RUS-01(2009)e1 Стандартная спецификация на оцинкованную обмоточную сетку для стальных труб
• ASTM A811-03(2008) Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
• ASTM A813/A813M-09 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
• ASTM A814/A814M-08 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
• ASTM A815/A815M-10a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
• ASTM A817-12 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
• ASTM A818-06(2010) Standard Specification for Coppered Carbon Steel Wire
• ASTM A820/A820M-11 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
• ASTM A821/A821M-10 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
• ASTM A822/A822M-04(2010) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
• ASTM A823-99(2012) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
• ASTM A824-01(2012) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
• ASTM A827/A827M-11 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
• ASTM A829/A829M-11 Standard Specification for Alloy Structural Steel Plates
• ASTM A830/A830M-13 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
• ASTM A832/A832M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
• ASTM A832/A832M-RUS-10 Стандартные технические условия на плиты для сосудов под давлением из стали, легированной хромом, молибденом и ванадием
• ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
• ASTM A833-RUS-08a СТАНДАРТНАЯ МЕТОДИКА ОПРЕДЕЛЕНИЯ ИНДЕНТОРНОЙ ТВЕРДОСТИ МАТЕРИАЛОВ С МЕТАЛЛИЧЕСКИМИ СВОЙСТВАМИ С ПОМОЩЬЮ СРАВНИТЕЛЬНЫХ ТВЕРДОМЕРОВ
• ASTM A834-95(2011) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
• ASTM A835/A835M-10 Standard Specification for Sizes of Ferroalloys and Alloy Additives
• ASTM A836/A836M-02(2007) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
• ASTM A837/A837M-06(2011) Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
• ASTM A837/A837M-RUS-06(2011) Стандартная спецификация на легированные стальные поковки, используемые для цементации
• ASTM A838-02(2013) Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
• ASTM A839-02(2008) Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
• ASTM A841/A841M-03a(2007) Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
• ASTM A842-11a Standard Specification for Compacted Graphite Iron Castings
• ASTM A844/A844M-09 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
• ASTM A847/A847M-12 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
• ASTM A848-01(2011) Standard Specification for Low-Carbon Magnetic Iron
• ASTM A849-10 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
• ASTM A853-04(2010) Standard Specification for Steel Wire, Carbon, for General Use
• ASTM A854/A854M-08(2013) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
• ASTM A855/A855M-03(2009) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
• ASTM A856/A856M-03(2009) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
• ASTM A857/A857M-07(2013) Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
• ASTM A858/A858M-10a Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
• ASTM A859/A859M-04(2009) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
• ASTM A860/A860M-10 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
• ASTM A861-04(2013) Standard Specification for High-Silicon Iron Pipe and Fittings
• ASTM A862/A862M-98(2008) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
• ASTM A865/A865M-06(2012) Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
• ASTM A866-09 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
• ASTM A867-03(2013) Standard Specification for Iron-Silicon Relay Steels
• ASTM A871/A871M-12 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
• ASTM A872/A872M-07a(2012) Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
• ASTM A874/A874M-98(2009) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
• ASTM A875/A875M-13 Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process
• ASTM A876-12 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
• ASTM A877/A877M-10e1 Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
• ASTM A878/A878M-05(2011) Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
• ASTM A879/A879M-12 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
• ASTM A881/A881M-10 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties
• ASTM A882/A882M-04a(2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
• ASTM A884/A884M-12 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
• ASTM A884/A884M-SP-12 Especificación Normalizada para Alambre y Refuerzo Electrosoldado de Alambre de Acero Recubierto con Epoxi
• ASTM A886/A886M-12 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
• ASTM A887-89(2009) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
• ASTM A888-13a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
• ASTM A889/A889M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
• ASTM A890/A890M-12a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
• ASTM A891/A891M-10 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
• ASTM A892-09 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
• ASTM A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
• ASTM A894/A894M-00(2011)e1 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
• ASTM A895-89(2009) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
• ASTM A896/A896M-09 Standard Practice for Conducting Case Studies on Galvanized Structures
• ASTM A897/A897M-06(2011) Standard Specification for Austempered Ductile Iron Castings
• ASTM A898/A898M-07(2012) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
• ASTM A899-91(2007) Standard Specification for Steel Wire, Epoxy-Coated
• ASTM A900/A900M-01(2012) Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
• ASTM A901-12 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
• ASTM A902-13a Standard Terminology Relating to Metallic Coated Steel Products
• ASTM A903/A903M-99(2012) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
• ASTM A904-09 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
• ASTM A905-04(2010) Standard Specification for Steel Wire, Pressure Vessel Winding
• ASTM A906/A906M-02(2010) Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
• ASTM A908-03(2013) Standard Specification for Stainless Steel Needle Tubing
• ASTM A909/A909M-06(2011) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
• ASTM A910/A910M-12 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
• ASTM A911/A911M-11 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
• ASTM A912/A912M-11 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
• ASTM A913/A913M-11 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
• ASTM A914/A914M-92(2011) Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
• ASTM A915/A915M-08(2013) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
• ASTM A917-08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
• ASTM A918-06(2011) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
• ASTM A920/A920M-07 Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
• ASTM A921/A921M-93(2011) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
• ASTM A922-05(2010) Standard Specification for Silicon Metal
• ASTM A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
• ASTM A924/A924M-13 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
• ASTM A925-03(2009)e1 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
• ASTM A926-03(2008) Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
• ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
• ASTM A928/A928M-11 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
• ASTM A929/A929M-01(2007) Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
• ASTM A930-09 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
• ASTM A931-08(2013) Standard Test Method for Tension Testing of Wire Ropes and Strand
• ASTM A932/A932M-01(2012) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
• ASTM A933/A933M-10 Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement
• ASTM A934/A934M-13 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
• ASTM A934/A934M-SP-13 Especificación Normalizada para Barras de Acero de Refuerzo Prefabricadas Recubiertas con Epoxi
• ASTM A937/A937M-12 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
• ASTM A938-07(2013) Standard Test Method for Torsion Testing of Wire
• ASTM A939/A939M-12 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
• ASTM A940/A940M-06(2011) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
• ASTM A941-13b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
• ASTM A942-95(2012) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
• ASTM A943/A943M-01(2009) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
• ASTM A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
• ASTM A945/A945M-06(2011) Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
• ASTM A947M-13 Standard Specification for Textured Stainless Steel Sheet [Metric]
• ASTM A949/A949M-01(2009) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
• ASTM A950/A950M-11 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• ASTM A951/A951M-11 Standard Specification for Steel Wire for Masonry Joint Reinforcement
• ASTM A952/A952M-02(2010) Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
• ASTM A955/A955M-12e1 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
• ASTM A956-12 Standard Test Method for Leeb Hardness Testing of Steel Products
• ASTM A957/A957M-13 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
• ASTM A958/A958M-10 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
• ASTM A959-11 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
• ASTM A960/A960M-13 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
• ASTM A961/A961M-12a Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
• ASTM A962/A962M-13a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
• ASTM A964/A964M-03(2011) Standard Specification for Corrugated Steel Box Culverts
• ASTM A965/A965M-12 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
• ASTM A966/A966M-08(2012) Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
• ASTM A967/A967M-13 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
• ASTM A968/A968M-96(2009) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
• ASTM A970/A970M-13a Standard Specification for Headed Steel Bars for Concrete Reinforcement
• ASTM A971/A971M-10 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
• ASTM A972/A972M-00(2010) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
• ASTM A973/A973M-07(2012) Standard Specification for Grade 100 Alloy Steel Chain
• ASTM A974-97(2011) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
• ASTM A975-11 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
• ASTM A976-03(2008) Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
• ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
• ASTM A978/A978M-08 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
• ASTM A979/A979M-03(2009) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
• ASTM A980/A980M-11 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
• ASTM A981/A981M-11 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
• ASTM A982/A982M-10 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
• ASTM A983/A983M-06(2011) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
• ASTM A984/A984M-03(2009) Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
• ASTM A985/A985M-13 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
• ASTM A986/A986M-01(2011) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
• ASTM A987/A987M-09 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
• ASTM A988/A988M-11 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
• ASTM A989/A989M-11 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
• ASTM A990/A990M-11e01 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
• ASTM A991/A991M-10 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
• ASTM A992/A992M-11 Standard Specification for Structural Steel Shapes
• ASTM A992/A992M-RUS-11 Стандартные технические условия на профили из конструкционной стали
• ASTM A992/A992M-SP-11 Especificación Normalizada para Perfiles de Acero Estructural
• ASTM A994-13 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
• ASTM A995/A995M-12a Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
• ASTM A996/A996M-09b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
• ASTM A997-08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
• ASTM A998/A998M-12 Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
• ASTM A999/A999M-13 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
• ASTM A1000/A1000M-11 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
• ASTM A1001-01(2010) Standard Specification for High Strength Steel Castings in Heavy Sections
• ASTM A1002-10 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
• ASTM A1003/A1003M-13a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
• ASTM A1004/A1004M-99(2009) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
• ASTM A1005/A1005M-00(2010) Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
• ASTM A1006/A1006M-00(2010) Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
• ASTM A1007-07 Standard Specification for Carbon Steel Wire for Wire Rope
• ASTM A1008/A1008M-12a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
• ASTM A1009-05(2010) Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications
• ASTM A1010/A1010M-01(2009) Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
• ASTM A1011/A1011M-12b Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM A1012-10 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
• ASTM A1013-00(2013)e1 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
• ASTM A1014/A1014M-10 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
• ASTM A1015-01(2009) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
• ASTM A1016/A1016M-13 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
• ASTM A1017/A1017M-11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
• ASTM A1018/A1018M-10 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
• ASTM A1020/A1020M-02(2012) Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications
• ASTM A1021/A1021M-05(2010) Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
• ASTM A1022/A1022M-13 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
• ASTM A1023/A1023M-09e1 Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
• ASTM A1024/A1024M-02(2012) Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
• ASTM A1025/A1025M-10 Standard Specification for Ferroalloys, General Requirements
• ASTM A1028-03(2009) Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
• ASTM A1030/A1030M-11 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
• ASTM A1031/A1031M-12 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
• ASTM A1032-04(2010) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
• ASTM A1033-10 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
• ASTM A1034/A1034M-10a Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
• ASTM A1035/A1035M-13a Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
• ASTM A1036-04(2009) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
• ASTM A1037/A1037M-05(2012) Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
• ASTM A1038-10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
• ASTM A1039/A1039M-13 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
• ASTM A1040-10 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
• ASTM A1042/A1042M-04(2009) Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
• ASTM A1043/A1043M-05(2009) Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
• ASTM A1044/A1044M-05(2010) Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
• ASTM A1045-10 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
• ASTM A1046/A1046M-10ae1 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
• ASTM A1047/A1047M-05(2009) Standard Test Method for Pneumatic Leak Testing of Tubing
• ASTM A1048/A1048M-06(2011) Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
• ASTM A1049/A1049M-10 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
• ASTM A1053/A1053M-12 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
• ASTM A1054-07 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
• ASTM A1055/A1055M-10e1 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
• ASTM A1056-12 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM A1057/A1057M-08 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
• ASTM A1058-12b Standard Test Methods for Mechanical Testing of Steel Products—Metric
• ASTM A1059/A1059M-08(2013) Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
• ASTM A1060/A1060M-11e1 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
• ASTM A1061/A1061M-09 Standard Test Methods for Testing Multi-Wire Steel Strand
• ASTM A1062-10 Standard Specification for Steel Castings Sampling
• ASTM A1063/A1063M-11a Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
• ASTM A1064/A1064M-12 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
• ASTM A1065/A1065M-09 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
• ASTM A1066/A1066M-11 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
• ASTM A1067/A1067M-12a Standard Specification for Test Coupons for Steel Castings
• ASTM A1068-10 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
• ASTM A1069/A1069M-11 Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
• ASTM A1071/A1071M-11 Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
• ASTM A1072/A1072M-11 Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
• ASTM A1073/A1073M-12 Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet
• ASTM A1074-11 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
• ASTM A1075-12 Standard Specification for Flanged Steel U-Channel Posts
• ASTM A1076/A1076M-12 Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
• ASTM A1077/A1077M-12 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
• ASTM A1078/A1078M-12 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
• ASTM A1079-13 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
• ASTM A1080-12 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
• ASTM A1081/A1081M-12 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
• ASTM A1082/A1082M-12 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
• ASTM A1083/A1083M-12 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
• ASTM A1084-13 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
• ASTM A1085-13 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
• ASTM A1086-13 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types

ASTM A | 1 | , ASTM B , ASTM C , ASTM D , ASTM E , ASTM F , ASTM G ,

- ASTM 규격 및 시험상담은 E-Mail : info@anycerti.com 로 연락바랍니다
위 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집 규격번호와 제목을 발췌, 열거한 것입니다.[출처 : www.astm.org ]