STD-ASTM D XXXX Conti 5

ASTM A , ASTM B , ASTM C , ASTM D | 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 | , ASTM E , ASTM F , ASTM G

• ASTM D4469 : EN-Standard Test Method for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
• ASTM D447 : EN-STANDARD TEST METHOD FOR DISTILLATION OF PLANT SPRAY OILS
• ASTM D4470 : EN-STANDARD TEST METHOD FOR STATIC ELECTRIFICATION
• ASTM D4471 : EN-Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
• ASTM D4472 : EN-STANDARD GUIDE FOR RECORDKEEPING FOR REVERSE OSMOSIS SYSTEMS
• ASTM D4473 : EN-Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
• ASTM D4473 REV A : EN-Standard Practice for Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Procedures
• ASTM D4474 : EN-STANDARD SPECIFICATION FOR STYRENIC THERMOPLASTIC ELASTOMER INJECTION MOLDING AND EXTRUSION MATERIALS (TES)
• ASTM D4475 : EN-Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods by the Short-Beam Method
• ASTM D4476 : EN-Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
• ASTM D4477 : EN-STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE) (PVC) SOFFIT
• ASTM D4477 REV A : EN-STANDARD SPECIFICATION FOR RIGID POLY(VINYL CHLORIDE) (PVC) SOFFIT
• ASTM D4478 : EN-STANDARD TEST METHODS FOR OXYGEN UPTAKE
• ASTM D4479 : EN-Standard Specification for Asphalt Roof Coatings-Asbestos-Free
• ASTM D448 : EN-STANDARD SPECIFICATION FOR STANDARD SIZES OF COARSE AGGREGATE FOR HIGHWAY CONSTRUCTION
• ASTM D448 REV A : EN-Standard Classification for Sizes of Aggregate for Road and Bridge Construction
• ASTM D4480 : EN-Standard Test Method for Measuring Surface Wind by Means of Wind Vanes and Rotating Anemometers
• ASTM D4481 : EN-STANDARD TEST METHOD FOR TOTAL NICKEL IN FRESH ALUMINA-BASE CATALYSTS
• ASTM D4482 : EN-Standard Test Method for Rubber Property-Extension Cycling Fatigue
• ASTM D4483 : EN-STANDARD PRACTICE FOR RUBBER – DETERMINING PRECISION FOR TEST METHOD STANDARDS (E1-1986)
• ASTM D4483 REV A : EN-Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
• ASTM D4484 : EN-STANDARD TEST METHOD FOR INORGANIC PARTICLES IN MARINE RESIDUAL FUEL OILS BY SELECTIVE CENTRIFUGAL SEPARATION
• ASTM D4485 : EN-Standard Specification for Performance of Engine Oils
• ASTM D4485 REV A : EN-STANDARD SPECIFICATION FOR PERFORMANCE ON ENGINE OILS
• ASTM D4485 REV B : EN-STANDARD SPECIFICATION FOR PERFORMANCE OF ENGINE OILS
• ASTM D4486 : EN-Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
• ASTM D4487 : EN-STANDARD TEST METHODS FOR ANALYSIS OF CALCIUM BOROSILICATE
• ASTM D4488 : EN-STANDARD GUIDE FOR TESTING CLEANING PERFORMANCE OF PRODUCTS INTENDED FOR USE ON RESILIENT FLOORING AND WASHABLE WALLS
• ASTM D4489 : EN-Standard Practices for Sampling of Waterborne Oils
• ASTM D449 : EN-Standard Specification for Asphalt Used in Dampproofing and Waterproofing-E1
• ASTM D4490 : EN-Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
• ASTM D4491 : EN-STANDARD TEST METHODS FOR WATER PERMEABILITY OF GEOTEXTILES BY PERMITTIVITY
• ASTM D4491 REV A : EN-Standard Test Methods for Water Permeability of Geotextiles by Permittivity
• ASTM D4492 : EN-Standard Test Method for Analysis of Benzene by Gas Chromatography
• ASTM D4493 : EN-Standard Test Method for Solidification Point of Bisphenol A (44´-Isopropylidenediphenol)
• ASTM D4494 : EN-Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
• ASTM D4495 : EN-Standard Test Method for Impact Resistance of Poly(염화 비닐) (PVC) Rigid Profiles by Means of a Falling Weight
• ASTM D4496 : EN-Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
• ASTM D4497 : EN-STANDARD TEST METHOD FOR DETERMINING THE OPEN TIME OF HOT MELT ADHESIVES (MANUAL METHOD)
• ASTM D4498 : EN-Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
• ASTM D4499 : EN-Standard Test Method for Heat Stability of Hot-Melt Adhesives
• ASTM D450 : EN-Standard Specification for Coal-Tar Pitch Used in Roofing Dampproofing and Waterproofing
• ASTM D4500 : EN-Standard Test Method for Determining Grit Lumps or Undissolved Matter in Water-Borne Adhesives
• ASTM D4501 : EN-STANDARD TEST METHOD FOR SHEAR STRENGTH OF ADHESIVE BONDS BETWEEN RIGID SUBSTRATES BY THE BLOCK-SHEAR METHOD
• ASTM D4502 : EN-Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
• ASTM D4503 : EN-Standard Practice for Dissolution of Solid Waste by Lithium Metaborate Fusion
• ASTM D4504 : EN-STANDARD SPECIFICATION FOR MOLDED POLYETHYLENE OPEN-HEAD-PAILS FOR INDUSTRIAL SHIPPING
• ASTM D4504 REV A : EN-STANDARD SPECIFICATION FOR MOLDED POLYETHYLENE OPEN-HEAD-PAILS FOR INDUSTRIAL SHIPPING
• ASTM D4505 : EN-Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
• ASTM D4505 REV A : EN-Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
• ASTM D4506 : EN-STANDARD TEST METHOD FOR DETERMINING THE IN SITU MODULUS OF DEFORMATION OF ROCK MASS USING A RADIAL JACKING TEST
• ASTM D4507 : EN-STANDARD SPECIFICATION FOR THERMOPLASTIC POLYESTER (TPES) MATERIALS-Discontinued 1999
• ASTM D4507 REV A : EN-Standard Specification for Thermoplastic Polyester (TPES) Materials
• ASTM D4508 : EN-Standard Test Method for Chip Impact Strength of Plastics
• ASTM D4508 REV A : EN-Standard Test Method for Chip Impact Strength of Plastics
• ASTM D4509 : EN-Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles
• ASTM D451 : EN-Standard Test Method for Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing Products
• ASTM D4510 : EN-STANDARD TEST METHOD FOR COUNTING PARTICLE CLEAVAGES IN WOOL AND OTHER ANIMAL FIBERS
• ASTM D4511 : EN-Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
• ASTM D4512 : EN-STANDARD TEST METHOD FOR VIBRATED APPARENT PACKING DENSITY OF FINE CATALYST PARTICLES AND POWDER (R 1991)
• ASTM D4513 : EN-Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
• ASTM D4514 : EN-Standard Specification for Friction Tape
• ASTM D4515 : 유기농 성분 함유 물 샘플에 대한 유지 시간의 추정을위한 EN-표준 연습
• ASTM의 D4516 : EN-표준 연습 역삼 투 성능 데이터를 표준화하기위한
• ASTM의 D4517 : 무 화염 원자 흡수 분광법에 의한 고순도 물에서 낮은 수준 총 실리카을위한 EN-표준 시험 방법
• ASTM의 D4518 : 코팅 표면의 정지 마찰을 측정하기위한 EN-표준 시험 방법
• ASTM의 D4519 : 전기 전도성 ON-LINE 모니터링을위한 EN-표준 시험 방법은 고순도의 물에 음이온과 이산화탄소를 파악하기 위해 (R 1990)
• ASTM D452 : 아스팔트 루핑 제품의 곡면의 체 분석을위한 EN-표준 시험 방법
• ASTM의 D4520 : EN-표준 연습 현장 홍수의 사용을 통해 물 입성을 결정하는
• ASTM의 D4521 : EN-STANDARD TEST METHOD FOR COEFFICIENT OF STATIC FRICTION OF CORRUGATED AND SOLID FIBERBOARD
• ASTM D4522 : EN-Standard Performance Specification for Feather-Filled and Down-Filled Products-Withdrawn 2003; No Replacement
• ASTM D4523 : EN-Standard Terminology Relating to Feather-Filled and Down-Filled Products
• ASTM D4524 : EN-Standard Test Method for Composition of Plumage
• ASTM D4525 : EN-Standard Test Method for Permeability of Rocks by Flowing Air
• ASTM D4526 : EN-Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
• ASTM D4527 : EN-STANDARD TEST METHODS FOR CARBON BLACK – SOLVENT EXTRACTABLES
• ASTM D4527 REV A : EN-Standard Test Methods for Carbon Black – Solvent Extractables
• ASTM D4528 : EN-Standard Classification for Rubber Compounding Materials-Sulfur
• ASTM D4529 : EN-Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels-IP Designation: 381/97
• ASTM D453 : 크레오소트 - 석탄 타르 솔루션에 타르 산에 대한 EN-표준 시험 방법
• ASTM의 D4530 : 석유 제품의 MICRO 탄소 RESIDUE을위한 EN-표준 시험 방법
• ASTM의 D4531 : 이탄 및 이탄 제품의 대량 밀도에 대한 EN-표준 시험 방법
• ASTM의 D4532 : 직장있는 환경에서 호흡 먼지에 대한 EN-표준 시험 방법
• ASTM의 D4533 : 토목 섬유의 강도를 찢어 사다리꼴을위한 EN-표준 시험 방법
• ASTM의 D4534 : 가스 크로마토 그래피에 의한 순환 제품의 벤젠 내용에 대한 EN-표준 시험 방법
• ASTM의 D4535 : EN-표준 시험 방법 바위가 팽창 계를 사용하여의 열팽창 측정을위한
• ASTM의 D4536 : SOLID 입자상 물질 미립자 배출량의 결정에 대한 대량 샘플링을위한 EN-표준 시험 방법
• ASTM D4536 REV A : EN-STANDARD TEST METHOD FOR HIGH VOLUME SAMPLING FOR SOLID PARTICULATE MATTER AND DETERMINATION OF PARTICULATE EMISSIONS
• ASTM D4537 : EN-Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
• ASTM D4537 REV A : EN-Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating Work Inspection in Nuclear Facilities
• ASTM D4538 : EN-STANDARD TERMINOLOGY RELATING TO PROTECTIVE COATING AND LINING WORK FOR POWER GENERATION FACILITIES
• ASTM D4538 REV A : EN-STANDARD TERMINOLOGY RELATING TO PROTECTIVE COATING AND LINING WORK FOR POWER GENERATION FACILITIES
• ASTM D4538 REV B : EN-STANDARD DEFINITIONS OF TERMS RELATING TO PROTECTIVE COATING AND LINING WORK FOR POWER GENERATION FACILITIES
• ASTM D4539 : EN-STANDARD TEST METHOD FOR FILTERABILITY OF DIESEL FUELS BY LOW-TEMPERATURE FLOW TEST
• ASTM D454 : EN-Standard Test Method for Rubber Deterioration by Heat and Air Pressure
• ASTM D4540 : EN-STANDARD GUIDE FOR TESTING INTERIOR LATEX SEMIGLOSS AND GLOSS PAINTS
• ASTM의 D4541 : EN-표준 시험 방법 코팅의 풀 오프 힘 휴대용 접착 테스터를 사용하여
• ASTM의 D4542 : EN-표준 시험 기공 물 추출 방법 및 굴절계에 의한 토양의 가용성 염분의 결정
• ASTM의 D4543 : EN-표준 사례 치수 및 형상 공차를 락 코어 시편을 준비하고 결정을위한
• ASTM의 D4544 : EN-표준 연습 이탄 예금 두께를 추정
• ASTM의 D4545 : 에서 사용되는 공장 솔기의 무결성을 확인하기위한 EN-표준 연습 유연한 시트 Geomembranes을 제조 합류
• ASTM의 D4546 : 응집 토양 ONE 차원 SWELL 또는 화해 잠재력에 대한 EN-표준 시험 방법
• ASTM의 D4547 : EN-표준 샘플링 폐기물에 대한 연습과 휘발성 유기물에 대한 토양
• ASTM의 D4548 : 혼합 침대 이온 교환 수지의 음이온 - 양이온 균형을위한 EN-표준 시험 방법
• ASTM의 D4549 : 폴리스티렌 성형 및 압출 물자를위한 EN-표준 사양 (PS)
• ASTM D455 : 가공 된 비누를위한 EN-표준 사양
• ASTM의 D4550 : EN-STANDARD SPECIFICATION FOR THERMOPLASTIC ELASTOMER-ETHER-ESTER (TEEE)
• ASTM D4550 REV A : EN-STANDARD SPECIFICATION FOR THERMOPLASTIC ELASTOMER-ETHER-ESTER (TEEE)
• ASTM D4551 : EN-Standard Specification for Poly(염화 비닐) (PVC) Plastic Flexible Concealed Water-Containment Membrane
• ASTM D4551 REV A : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC FLEXIBLE CONCEALED WATER- CONTAINMENT MEMBRANE
• ASTM D4551 REV B : EN-STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PLASTIC FLEXIBLE CONCEALED WATER- CONTAINMENT MEMBRANE
• ASTM D4552 : EN-Standard Practice for Classifying Hot-Mix Recycling Agents
• ASTM D4552/D4552M : EN-Standard Practice for Classifying Hot-Mix Recycling Agents
• ASTM D4553 : EN-Standard Test Method for Determining In Situ Creep Characteristics of Rock
• ASTM D4554 : EN-STANDARD TEST METHOD FOR IN-SITU DETERMINATION OF DIRECT SHEAR STRENGTH OF ROCK DISCONTINUITIES
• ASTM D4555 : EN-Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
• ASTM D4556 : EN-Standard Guide for Selecting Stream-Net Sampling Devices for Collecting Benthic Macroinvertebrates
• ASTM D4574 : 고무 배합을위한 EN-표준 시험 방법 회분의 재료-결정
• ASTM의 D4575 : 고무 악화-참조 및 다른 방법에 대한 EN-표준 시험 방법(의) 실험실 테스트 챔버에 오존 수준을 결정하는
• ASTM의 D4576 : 젖은 블루의 금형 성장 저항에 대한 EN-표준 시험 방법
• ASTM의 D4577 : 상수로드에서 컨테이너의 압축 저항을위한 EN-표준 시험 방법
• ASTM의 D4578 : 추출 비율 유황의 고무 ChemicalsDetermination을위한 EN-표준 시험 방법
• ASTM의 D4579 : 아직도 산 기름때 또는 취급 EN-표준 연습
• ASTM D458 : 소다 애쉬을위한 EN-표준 사양
• ASTM의 D4580 : 측심에 의해 콘크리트 다리 덱에서 층간 분리를 측정하기위한 EN-표준 연습
• ASTM의 D4581 : 표면 물 기관의 형태 학적 특성의 측정을위한 EN-표준 가이드
• ASTM의 D4582 : EN-STANDARD PRACTICE FOR CALCULATION AND ADJUSTMENT OF THE STIFF AND DAVIS STABILITY INDEX FOR REVERSE OSMOSIS
• ASTM D4583 : EN-Standard Practice for Carbon Black-Calculation of Process Indexes From an Analysis of Process Control Data
• ASTM D4584 : EN-Standard Test Method for Measuring Apparent pH of Electrocoat Baths
• ASTM D4585 : EN-Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
• ASTM D4585 REV A : EN-STANDARD PRACTICE FOR TESTING WATER RESISTANCE OF COATINGS USING CONTROLLED CONDENSATION
• ASTM D4586 : EN-Standard Specification for Asphalt Roof Cement Asbestos-Free
• ASTM D4587 : EN-Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings-Reinstated
• ASTM D4588 : EN-STANDARD GUIDE FOR ANALYSIS OF P-XYLENE
• ASTM D4589 : EN-Standard Test Method for Nitrobenzene in Aniline
• ASTM D459 : EN-STANDARD TERMINOLOGY RELATING TO SOAPS AND OTHER DETERGENTS
• ASTM D459 REV A : EN-Standard Terminology Relating to Soaps and Other Detergents
• ASTM D4590 : EN-Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (a-Methylstyrene) by Spectrophotometry
• ASTM D4590 REV A : EN-Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol in Styrene Monomer or AMS (Alpha-Methylstyrene) by Spectrophotometry
• ASTM D4591 : EN-Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
• ASTM D4591 REV A : EN-Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
• ASTM D4592 : EN-Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
• ASTM D4592 REV A : EN-Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
• ASTM D4594 : EN-STANDARD TEST METHOD FOR EFFECTS OF TEMPERATURE ON STABILITY OF GEOTEXTILES
• ASTM D4595 : EN-Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
• ASTM D4596 : EN-Standard Practice for Collection of Channel Samples of Coal in the Mine
• ASTM D4597 : EN-Standard Practice for Sampling Workplace Atmospheres to Collect Organic Gases or Vapors with Activated Charcoal Diffusional Samplers
• ASTM D4598 : EN-Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Liquid Sorbent Diffusional Samplers
• ASTM D4599 : EN-STANDARD PRACTICE FOR MEASURING THE CONCENTRATION OF TOXIC GASES OR VAPORS USING LENGTH-OF-STAIN DOSIMETERS
• ASTM D460 : EN-STANDARD TEST METHODS FOR SAMPLING AND CHEMICAL ANALYSIS OF SOAPS AND SOAP PRODUCTS
• ASTM D4600 : EN-Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
• ASTM D4601 : 루핑 사용한 아스팔트 코팅 유리 섬유 원판을위한 EN-표준 사양
• ASTM D4601의 REV A를 : 지붕에 사용되는 아스팔트 코팅 된 유리 섬유 자료 시트에 대한 EN-표준 사양
• ASTM의 D4602 : 순환-로드 동적 편향 장비를 사용하여 도로 포장의 비파괴 검사를위한 EN-표준 가이드
• ASTM의 D4603 : 폴리의 고유 점도를 결정하기위한 EN-표준 시험 방법(에틸렌 테레 프탈레이트) (착한 애) 유리 모세관 점도계에 의해
• ASTM의 D4604 : 대량 INSTRUMENTS BY면 섬유의 측정을위한 EN-표준 시험 방법 (HVI) (MOTION CONTROL 섬유 정보 시스템)
• ASTM의 D4605 : EN-표준 시험 방법 높은 볼륨 계기로 목화 섬유의 측정을위한 (HVI) (특수 악기 연구소 시스템)
• ASTM의 D4606 : EN-Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
• ASTM D4607 : EN-Standard Test Method for Determination of Iodine Number of Activated Carbon
• ASTM D4608 : EN-Standard Test Method for Citrate in Detergents
• ASTM D4609 : EN-STANDARD GUIDE FOR SCREENING CHEMICALS FOR SOIL STABILIZATION
• ASTM D461 : EN-STANDARD TEST METHODS FOR FELT
• ASTM D4610 : EN-Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
• ASTM D4611 : EN-Standard Test Method for Specific Heat of Rock and Soil
• ASTM D4612 : EN-Standard Practice for Calculating Thermal Diffusivity of Rocks
• ASTM D4613 : EN-Standard Test Method for Measuring Apparent pH of Water Insoluble Phenol-Formaldehyde Resins
• ASTM D4614 : EN-Standard Specification for Ethyl Acetate (모든 성적)
• ASTM의 D4615 : N 부틸 아세테이트에 대한 EN-표준 사양 (모든 성적)
• ASTM의 D4616 : 대한 현미경 분석을위한 EN-표준 시험 방법 빛 반사와 피치에 중간상의 결정에 의해
• ASTM의 D4617 : 페놀 화합물을위한 EN-표준 사양 (PF)
• ASTM D4617의 REV A를 : 페놀 화합물을위한 EN-표준 사양 (PF)
• ASTM의 D4618 : 보호 라이닝 적용을위한 배연 탈황 시스템 구성 요소의 설계 및 제작을위한 EN-표준 사양
• ASTM의 D4619 : 운영 배연 탈황 시스템에서 라이닝의 검사를위한 EN-표준 연습
• ASTM의 D4620 : 고무 아연 산화물의 유효 면적을 평가하기위한 EN-표준 시험 방법
• ASTM의 D4621 : 조직의 품질 관리를위한 EN-표준 가이드 샘플이나 시험 석탄 및 코크스 그
• ASTM D4621의 REV A를 : 석탄 분석 실험실에서 책임과 품질 관리를위한 EN-표준 가이드
• ASTM D4621의 역 회전 B : 석탄 분석 실험실에서 책임과 품질 관리를위한 EN-표준 가이드
• ASTM의 D4622 : 경사계를 사용하여 암반 모니터링을위한 EN-표준 시험 방법
• ASTM의 D4623 : Overcoring 방법-USBM 시추공 변형 게이지에 의한 암반에서에서 제자리 스트레스의 결정을위한 EN-표준 시험 방법
• ASTM의 D4624 : EN-표준 시험 방법 고온 전단 요금에 모세관 점도계에 의해 겉보기 점도를 측정하기위한
• ASTM의 D4625 : 에서 중간 증류 연료 저장 안정성을위한 EN-표준 시험 방법 43 Degrees C (110 Degrees F)-IP Designation: 378/87
• ASTM의 D4626 : 가스 크로마토 그래피 응답의 계산을위한 EN-규범 요인-IP 명칭: 378/87
• ASTM의 D4627 : 물 희석 금속 가공 유체에 대한 철 칩 부식에 대한 EN-표준 시험 방법
• ASTM의 D4628 : 원자 흡수 분광법에 의한 않는 윤활 오일의 바륨 칼슘 마그네슘의 분석 및 아연을위한 EN-표준 시험 방법
• ASTM D4628 REV A : 원자 흡수 분광법에 의한 않는 윤활 오일의 바륨 칼슘 마그네슘의 분석 및 아연을위한 EN-표준 시험 방법
• ASTM D4629 : EN-STANDART TEST METHOD FOR TRACE NITROGEN IN LIQUID PETROLEUM HYDROCARBONS BY SYRINGE/INLET OXIDATIVE COMBUSTION AND CHEMILUMINTSCENCE DETECTION
• ASTM D4630 : EN-Standard Test Method for Determining Transmissivity and Storativity of Low- Permeability Rocks by in-Situ Measurements Using the Constant Head Injection Test
• ASTM D4631 : EN-STANDARD TEST METHOD FOR DETERMINING TRANSMISSIVITY AND STORATIVITY OF LOW PERMEABILITY ROCKS BY IN SITU MEASUREMENTS USING THE PRESSURE PULSE TECHNIQUE (R 1991)
• ASTM D4632 : EN-Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
• ASTM D4633 : EN-Standard Test Method for Stress Wave Energy Measurement for Dynamic Penetrometer Testing Systems-(Discontinued 1995; No Replacement)
• ASTM D4634 : EN-Standard Specification for Styrene-Maleic Anhydride Materials (S/MA)
• ASTM D4635 : 일반 사용 및 포장 응용 프로그램에 대한 저밀도 폴리에틸렌에서 만든 폴리에틸렌 필름에 대한 EN-표준 사양
• ASTM D4635의 REV A를 : 일반 사용 및 포장 응용 프로그램에 대한 저밀도 폴리에틸렌에서 만든 폴리에틸렌 필름에 대한 EN-표준 사양
• ASTM의 D4636 : 유압 오일 항공기 터빈 엔진 윤활유 및 기타 고도의 정제 된 오일의 부식성 및 산화 안정성에 대한 EN-표준 시험 방법
• ASTM D4636의 REV A를 : 유압 오일 항공기 터빈 엔진 윤활유 및 기타 고도의 정제 된 오일의 부식성 및 산화 안정성에 대한 EN-표준 시험 방법
• ASTM D4637 : SINGLE에서 이용되는 가황 고무 시트를위한 EN-표준 사양- PLY 지붕 멤브레인
• ASTM의 D4638 : 무기 화학 분석을위한 생물의 샘플의 준비를위한 EN-표준 가이드
• ASTM D4638의 REV A를 : 무기 화학 분석을위한 생물 샘플의 제조를위한 EN-표준 가이드
• ASTM의 D4639 : 페놀 수지의 휘발성 내용에 대한 EN-표준 시험 방법
• ASTM D464 : 로진의 비누화 번호에 대한 EN-표준 시험 방법 (R 1987)
• ASTM의 D4640 : EN-Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
• ASTM D4641 : EN-STANDARD PRACTICE FOR CALCULATION OF PORE SIZE DISTRIBUTIONS OF CATALYSTS FROM NITROGEN DESORPTION ISOTHERMS
• ASTM D4642 : EN-STANDARD TEST METHOD FOR PLATINUM IN REFORMING CATALYSTS
• ASTM D4643 : EN-Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method
• ASTM D4644 : EN-Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
• ASTM D4645 : EN-Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method
• ASTM D4646 : EN-Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments-Replaces ES10-85
• ASTM D4647 : 핀홀 테스트에 의해 식별 및 분산 형 점토 토양의 분류를위한 EN-표준 시험 방법
• ASTM의 D4648 : 포화 세분화 된 점토질 토양 실험실 소형 베인 전단 시험을위한 EN-표준 시험 방법
• ASTM의 D4649 : STRETCH WRAP 자료의 선택을위한 EN-표준 가이드
• ASTM D465 : 로진의 ACID 번호에 대한 EN-표준 시험 방법 (R 1987) (E1-1987)
• ASTM의 D4650 : 일반 부탄 열 물리 속성 테이블을위한 EN-표준 사양
• ASTM의 D4651 : 이소 부탄 열 물리 속성 테이블을위한 EN-표준 사양
• ASTM의 D4652 : 전기 절연에 사용되는 실리콘 오일을위한 EN-표준 사양
• ASTM의 D4653 : 가죽에 총 염화물을위한 EN-표준 시험 방법
• ASTM의 D4654 : 가죽에 황산 염기도를위한 EN-표준 시험 방법
• ASTM의 D4655 : 가죽의 황산염을위한 EN-표준 시험 방법 (총 중립과 결합 된 산)
• ASTM의 D4656 : 미리 희석 수성 에틸렌 글리콜 자료 엔진 냉각수에 대한 EN-표준 사양 (50 음량 % 최저한의) 자동차 및 라이트 듀티 서비스에 대한
• ASTM의 D4657 : 물에서 다핵 방향족 탄화수소에 대한 EN-표준 시험 방법
• ASTM의 D4658 : 물에 황화 이온을위한 EN-표준 시험 방법
• ASTM의 D4659 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: 이소시아네이트의 비중의 결정
• ASTM D466 : 아스팔트 유제로부터 증착 필름을위한 EN-표준 시험 방법
• ASTM의 D4660 : 폴리 우레탄 원료 EN-표준 시험 방법: 톨루엔 디 이소시아네이트의 이성질체 함량의 결정
• ASTM의 D4661 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: 이소시아네이트에 총 염소의 결정
• ASTM의 D4662 : 폴리 우레탄 원료 EN-표준 시험 방법: 폴리올의 ACID의 결정과 알칼리성 NUMBERS
• ASTM의 D4663 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: 이소시아네이트의 가수 분해 가능한 염소의 결정
• ASTM의 D4664 : EN-STANDARD TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF FREEZING POINT OF TOLUENE DIISOCYANATE MIXTURES
• ASTM D4665 : EN-STANDARD TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF ASSAY OF ISOCYANATES
• ASTM D4666 : EN-STANDARD TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF AMINE EQUIVALENT CRUDE OR MODIFIED ISOCYANATES
• ASTM D4667 : EN-STANDARD TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF ACIDITY IN TOLUENE DIISOCYANATE
• ASTM D4668 : EN-STANDARD TEST METHOD FOR POLYURETHANE RAW MATERIALS: DETERMINATION OF SODIUM AND POTASSIUM IN POLYOLS
• ASTM D4669 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: Determination of Specific Gravity of Polyols
• ASTM D4670 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: Determination of Suspended Matter In Polyols
• ASTM D4671 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: Determination of Unsaturation of Polyols
• ASTM D4672 : 폴리 우레탄 원료 EN-표준 시험 방법: DETERMINATION OF WATER CONTENT POLYOLS
• ASTM D4673 : EN-Standard Specification for Acrylonitrile- Butadiene-Styrene (ABS) Molding and Extrusion Materials
• ASTM D4674 : EN-Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
• ASTM D4674 REV A : 실내 사무실 환경에 노출 된 플라스틱의 색상 안정성을위한 가속 테스트를위한 EN-표준 연습
• ASTM의 D4675 : 선택 및 평면 달아서 재료의 사용을위한 EN-표준 가이드
• ASTM의 D4676 : 고무 배합 재료 -p- 페닐 렌 디아민 방지제의 설명을위한 EN-STANDARD 연습
• ASTM의 D4677 : 고무 배합을위한 EN-표준 분류 재료 - 이산화 티타늄
• ASTM의 D4678 : EN-표준 고무 준비 시험 합격 문서에 대한 연습과 참고 자료의 사용
• ASTM의 D4679 : 고무 가정용 또는 미용사 장갑을위한 EN-표준 사양
• ASTM의 D4680 : 압축로드에 의해 정적 전단에 접착제의 실패에 크리프 및 시간에 대한 EN-표준 시험 방법 (목재 - 투 - 나무)
• ASTM의 D4681 : 두 스트로크 사이클 스파크 점화 가솔린 엔진 용 윤활유에 대한 EN-표준 사양 (TSC-4)
• ASTM의 D4682 : 두 스트로크 사이클 가솔린 엔진 윤활유의 가솔린​​ 및 유동성과 혼을위한 EN-표준 사양
• ASTM의 D4683 : 새의 점도를 측정하기위한 EN-표준 시험 방법 및 높은 전단 속도 및 테이퍼 베어링 시뮬레이터 점도계에 의해 고온에서의 사용 엔진 오일 150 학위 C
• ASTM의 D4684 : 저온에서 항복 응력의 측정 및 엔진 오일의 겉보기 점도를위한 EN-STANDART의 시험 방법
• ASTM D4684의 REV A를 : 항복 응력의 결정과 낮은 온도에서 엔진 오일의 겉보기 점도를위한 EN-표준 시험 방법
• ASTM의 D4685 : 코듀로이 Fabrics-의 더미 보존을위한 EN-표준 시험 방법(Discontinued 1997; No Replacement)
• ASTM의 D4686 : 주파수 분포의 식별을위한 EN-표준 가이드
• ASTM의 D4687 : 폐기물 시료 채취의 일반 계획에 대한 EN-표준 가이드
• ASTM의 D4688 : FINGERJOINTING 목재위한 구조용 접착제 평가를위한 EN-표준 시험 방법
• ASTM의 D4689 : 접착제 카제인-TYPE에 대한 EN-표준 사양
• ASTM D4689의 REV A를 : 접착제 카제인 형에 대한 EN-표준 사양
• ASTM D469 : 와이어 및 케이블에 대한 천연 고무 열 저항 절연을위한 EN-표준 사양 75 Degrees C Operation
• ASTM의 D4690 : 우레아 - 포름 알데히드 수지 접착제를위한 EN-표준 사양
• ASTM D4690의 REV A를 : 우레아 - 포름 알데히드 수지 접착제를위한 EN-표준 사양
• ASTM의 D4691 : 불꽃 원자 흡광 광도법에 의해 물에서 요소를 측정하기위한 EN-표준 연습
• ASTM의 D4692 : 황산 확장 소금의 계산 및 조정을위한 EN-표준 연습 (CaSO4 SrSO4 및 황산 바륨 (BaSO4)) 역삼 투에 대한
• ASTM의 D4693 : 그리스 윤활 휠 베어링의 저온 토크에 대한 EN-표준 시험 방법
• ASTM의 D4694 : 하강 - 중량 형 임펄스 부하 장치와 처짐을위한 EN-표준 시험 방법
• ASTM의 D4695 : 일반 포장 처짐 측정을위한 EN-표준 가이드
• ASTM의 D4696 : VADOSE 영역에서 기공 - 액체 샘플링을위한 EN-표준 가이드
• ASTM의 D4697 : 보유한 가장 실험실에서 시험 방법을 유지하기위한 EN-표준 가이드
• ASTM의 D4698 : 각종 금속의 화학 분석을위한 퇴적물 샘플의 총 소화를위한 EN-표준 연습
• ASTM의 D4699 : 큰 형성된 촉매 입자의 진동 포장 밀도에 대한 EN-표준 시험 방법
• ASTM D470 : 가교 단열재 및 전선 및 케이블 자켓을위한 EN-표준 시험 방법
• ASTM D470 REV B : 와이어 및 케이블에 대한 가교 INSULATIONS 및 재킷 EN-표준 시험 방법
• ASTM의 D47​​00 : VADOSE 지역에서 토양 샘플링을위한 EN-표준 가이드
• ASTM의 D47​​01 : 기술 학년 염화 메틸렌을위한 EN-표준 사양
• ASTM의 D47​​02 : EN-Standard Practice for Quality Management of Mechanical Coal Sampling Systems
• ASTM D4702 REV A : EN-Standard Guide for Quality Management of Mechanical Coal Sampling Systems
• ASTM D4703 : EN-Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens Plaques or Sheets-Replaces ASTM D 1928-1996
• ASTM D4703 REV A : EN-STANDARD PRACTICE FOR COMPRESSION MOLDING THERMOPLASTIC MATERIALS INTO TEST SPECIMENS PLAQUES OR SHEETS
• ASTM D4704 : EN-Standard Test Method for Tearing Strength Tongue Tear of Leather
• ASTM D4705 : EN-Standard Test Method for Stitch Tear Strength of Leather Double Hole
• ASTM D4706 : EN-Standard Test Method for Qualitative Determination of Methylol Group in Phenolic Resins
• ASTM D4707 : EN-Standard Test Method for Measuring Paint Spatter Resistance to Roller Application
• ASTM D4708 : EN-STANDARD PRACTICE FOR PREPARATION OF UNIFORM FREE FILMS OF ORGANIC COATINGS
• ASTM D4708 REV A : EN-Standard Practice for Preparation of Uniform Free Films of Organic Coatings
• ASTM D4709 : EN-Standard Specification for Methyl Acrylate
• ASTM D471 : EN-Standard Test Method for Rubber Property-Effect of Liquids
• ASTM D4710 : EN-STANDARD SPECIFICATION FOR ACETALDEHYDE
• ASTM D4711 : EN-Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
• ASTM D4712 REV A : EN-Standard Guide for Testing Industrial Water-Reducible Coatings
• ASTM D4713 : EN-STANDARD TEST METHODS FOR NONVOLATILE CONTENT OF PRINTING INKS RESIN SOLUTIONS AND VEHICLES (E1 – 1988)
• ASTM D4714 : EN-STANDARD TEST METHOD FOR DETERMINATION OF EFFECT OF MOIST HEAT ON PROPERTIES OF PAPER AND BOARD
• ASTM D4715 : EN-Standard Test Method for Coking Value of Tar and Pitch (Alcan)
• ASTM D4716 : EN-Test Method for Determining the (In-Plane) 상수 헤드를 사용하여 단위 폭 및 토목 섬유의 유압 투과율 당 유량
• ASTM의 D47​​18 : 오버 사이즈 입자를 포함하는 토양에 대한 단위 중량의 수정 및 물 내용에 대한 EN-표준 연습
• ASTM의 D47​​19 : 토양에 Prebored Pressuremeter 테스트를위한 EN-표준 시험 방법
• ASTM의 D47​​20 : 소프트 윈도우 코팅의 성능 평가를위한 EN-표준 연습
• ASTM의 D47​​21 : 기계 세척 및 Drycleanable Bedcoverings 및 액세서리의 성능 평가를위한 EN-표준 연습
• ASTM의 D47​​22 : 기계 빨 WOVEN의 성능 평가 및 니트 가정용 침대 시트와 베갯잇을위한 EN-STANDARD 연습
• ASTM의 D47​​23 : EN-표준의 색인 및 섬유 열 및 난연성 시험 방법 및 성능 사양에 대한 설명
• ASTM의 D47​​24 : EN-표준 시험 방법 바늘 삽입 방법에 의해 필라멘트 원사 얽힘의 정도에 대한
• ASTM의 D47​​25 : 엔진 냉각제 용 EN-표준 용어
• ASTM D4725의 REV A를 : 엔진 냉각제 용 EN-표준 용어
• ASTM D4725의 역 회전 B : 엔진 냉각제 용 EN-표준 용어
• ASTM의 D47​​26 : WHITE 엄밀한 POLY을위한 EN-표준 사양(VINYL CHLORIDE) (PVC) 조립 된 창문과 문에 사용 EXTERIOR-소개 EXTRUSIONS
• ASTM의 D47​​27 : 골판지 및 SOLID 섬유판 보건 주식에 대한 EN-표준 사양 (컨테이너 학년) AND CUT 모양
• ASTM의 D47​​27 / D4727M : 골판지 및 SOLID 섬유판 보건 주식에 대한 EN-표준 사양 (컨테이너 학년) AND CUT 모양
• ASTM D4728 : 배송 컨테이너의 랜덤 진동 테스트를위한 EN-표준 시험 방법
• ASTM의 D47​​29 : EN-표준 시험 방법 제자리 스트레스와 계수에서 변형의 Flatjack 방법을 사용하기위한
• ASTM D473 : 추출 방법-API의 지정에 의해 오일과 연료 오일 원유의 침전물을위한 EN-표준 시험 방법: Chapter 10-1 (MPMS); IP Designation: 53/82
• ASTM의 D47​​30 : 통신 와이어 및 케이블에 대한 홍수 화합물에 대한 EN-표준 사양
• ASTM의 D47​​31 : 통신 와이어 및 케이블에 대한 핫 응용 프로그램 충진 화합물에 대한 EN-표준 사양
• ASTM의 D47​​32 : 통신 와이어 및 케이블에 대한 쿨 응용 프로그램 충진 화합물에 대한 EN-표준 사양
• ASTM의 D47​​33 : 무용 전기 절연 니스에 대한 EN-표준 시험 방법
• ASTM의 D47​​34 : 정제 된 벤젠 (545)에 대한 EN-표준 사양
• ASTM D4734의 REV A를 : 정제 된 벤젠-545에 대한 EN-표준 사양
• ASTM D4734의 역 회전 B : 정제 된 벤젠-545에 대한 EN-표준 사양
• ASTM의 D47​​35 : 가스 크로마토 그래피에 의해 정제 된 벤젠의 추적 티 오펜의 결정을위한 EN-표준 시험 방법
• ASTM의 D47​​36 : EN-표준 시험 방법은 석유에 사용되는 오일의 마찰 보존 특성을 평가하기위한 청동 직면 마찰 클러치를 냉각
• ASTM의 D47​​37 : EN-Standard Test Method for Calculated Cetane Index by Four Variable Equation
• ASTM D4737 REV A : EN-Standard Test Method for Calculated Cetane Index by Four Variable Equation-IP Designation: 380/98
• ASTM D4738 : EN-Standard Practice for Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method
• ASTM의 D47​​39 : EN-Standard Test Method for Base Number Determination by Potentiometric Titration
• ASTM D4739 REV A : EN-STANDARD TEST METHOD FOR BASE NUMBER DETERMINATION BY POTENTIOMETRIC TITRATION
• ASTM D4740 : EN-Standard Test Method for Stability and Compatibility of Residual Fuels by Spot Test
• ASTM D4741 : EN-Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
• ASTM의 D47​​42 : EN-Standard Test Method for Oxidation Stabiliy of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
• ASTM D4742 REV A : EN-Standard Test Method for Oxidation Stabiliy of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
• ASTM D4743 : EN-Standard Test Method for Efficacy of Solvent Systems for Dissolving Water-Formed Deposits
• ASTM D4744 : EN-Standard Test Method for Organic Halides in Water by Carbon Adsorption-Microcoulometric Detection
• ASTM D4745 : EN-Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
• ASTM D4746 : EN-Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
• ASTM D4747 : EN-Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
• ASTM D4748 : EN-Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
• ASTM D4749 : EN-Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size-Replaces ASTM D310-88 D311-84 D410-84 D431-84; E1-1994
• ASTM D475 : EN-Standard Specification for Pure Para Red Toner Pigment
• ASTM D4750 : EN-Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
• ASTM D4751 : EN-STANDARD TEST METHOD FOR DETERMINING APPARENT OPENING SIZE OF A GEOTEXTILE
• ASTM D4751 REV A : EN-Standard Test Method for Determining Apparent Opening Size of a Geotextile
• ASTM D4752 : EN-Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
• ASTM D4753 : EN-STANDARD SPECIFICATION FOR EVALUATING SELECTING AND SPECIFYING BALANCES AND SCALES FOR USE IN TESTING SOIL ROCK AND RELATED CONSTRUCTION MATERIALS
• ASTM D4754 : EN-Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
• ASTM D4755 : EN-STANDARD TEST METHOD FOR FREE HALOGENS IN HALOGENATED ORGANIC SOLVENTS AND THEIR ADMIXTURES
• ASTM D4756 : EN-Standard Practice for Installation of Rigid Poly(염화 비닐) (PVC) Siding and Soffit
• ASTM D4756 REV A : EN-Standard Practice for Installation of Rigid Poly(염화 비닐) (PVC) Siding and Soffit
• ASTM D4757 : EN-STANDARD PRACTICE FOR PLACARDING SOLVENT VAPOR DEGREASERS
• ASTM D4758 : EN-Standard Test Method for Nonvolatile Content of Latexes
• ASTM D4759 : EN-Standard Practice for Determining the Specification Conformance of Geosynthetics
• ASTM D476 : EN-Standard Specification for Titanium Dioxide Pigments
• ASTM D4760 : EN-Standard Test Method for Proper Resecuring of Type I (Continuous Thread) Child-Resistant Closures
• ASTM D4761 : EN-Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
• ASTM D4761 REV A : EN-Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
• ASTM D4762 : EN-Standard Guide for Testing Polymer Matrix Composite Materials
• ASTM D4763 : EN-Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
• ASTM D4764 : EN-Standard Test Method for Determination by X-Ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
• ASTM D4765 : EN-Standard Test Method for Fluorides in Workplace Atmospheres
• ASTM D4766 : EN-Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
• ASTM D4767 : EN-STANDARD TEST METHOD FOR CONSOLIDATED-UNDRAINED TRIAXIAL COMPRESSION TEST ON COHESIVE SOILS
• ASTM D4768 : EN-Standard Test Method for Analysis of 26-Ditertiary-Butyl Para-Cresol and 26-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography
• ASTM D4769 : EN-Standard Specification for Woven and Warp Knitted Comforter Fabrics
• ASTM D477 : EN-STANDARD SPECIFICATION FOR ZINC SULFIDE PIGMENTS
• ASTM D4770 : EN-Standard Test Method for Evaluation of Man-Made Fiber Batting Used as Filling in Outerwear Apparel-Discontinued 1996
• ASTM D4770/D4770M : EN-Standard Test Method for Appearance and Integrity of Highloft Batting After Refurbishing
• ASTM D4771 : EN-Standard Specification for Knitted Upholstery Fabrics for Indoor Furniture
• ASTM D4771/D4771M : EN-Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture
• ASTM D4772 : EN-Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
• ASTM D4773 : EN-Standard Test Method for Purity of Propylene Glycol Monomethyl Ether Dipropylene Glycol Monomethyl Ether and Propylene Glycol Monomethyl Ether Acetate
• ASTM D4774 : EN-STANDARD SPECIFICATION FOR USER APPLIED DRUG LABELS IN ANESTHESIOLOGY
• ASTM D4775 : EN-Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
• ASTM D4775/D4775M : EN-Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
• ASTM D4776 : EN-Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
• ASTM D4776 REV A : EN-Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
• ASTM D4776/D4776M : EN-Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
• ASTM D4777 : EN-Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by Hot U-Test Procedure
• ASTM D4778 : EN-Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water under Heat Transfer Conditions
• ASTM D4779 : EN-STANDARD TEST METHOD FOR TOTAL ORGANIC AND INORGANIC CARBON IN HIGH PURITY WATER BY ULTRAVIOLET (UV) OR PERSULFATE OXIDATION OR BOTH AND INFRARED DETECTION
• ASTM D478 : EN-Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
• ASTM D4780 : EN-Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption
• ASTM D4781 : EN-Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
• ASTM D4782 : EN-STANDARD TEST METHOD FOR PALLADIUM IN MOLECULAR SIEVE CATALYST
• ASTM D4783 : EN-Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria Yeast and Fungi
• ASTM D4783 REV A : EN-Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria Yeast and Fungi
• ASTM D4784 : EN-Standard Specification for LNG Density Calculation Models
• ASTM D4785 : EN-STANDARD TEST METHOD FOR LOW-LEVEL IODINE-131 IN WATER
• ASTM D4785 REV A : EN-Standard Test Method for Low-Level Iodine-131 in Water
• ASTM D4786 : EN-Standard Test Method for Stitch Tear Strength Single Hole
• ASTM D4787 : EN-Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
• ASTM D4788 : EN-Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
• ASTM D4789 : EN-Standard Test Method for Solution Color of Bisphenol A (44´-Isopropylidenediphenol)
• ASTM D4790 : EN-STANDARD TERMINOLOGY RELATING TO AROMATIC HYDROCARBONS AND RELATED CHEMICALS
• ASTM D4790 REV A : EN-STANDARD TERMINOLOGY OF AROMATIC HYDROCARBONS AND RELATED CHEMICALS
• ASTM D4791 : EN-Standard Test Method for Flat Particles Elongated Particles or Flat and Elongated Particles in Coarse Aggregate
• ASTM D4792 : EN-Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
• ASTM D4793 : EN-STANDARD TEST METHOD FOR SEQUENTIAL BATCH EXTRACTION OF WASTE WITH WATER
• ASTM D4794 : EN-STANDARD TEST METHOD FOR DETERMINATION OF ETHOXYL SUBSTITUTION IN CELLULOSE ETHER PRODUCTS BY GAS CHROMATOGRAPHY
• ASTM D4795 : EN-Standard Test Method for Nitrogen Content of Soluble Nitrocellulose – Alternative Method
• ASTM D4796 : EN-Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
• ASTM D4797 : EN-Standard Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide
• ASTM D4798 : EN-STANDARD TEST METHOD FOR ACCELERATED WEATHERING TEST CONDITIONS AND PROCEDURES FOR BITUMINOUS MATERIALS (XENON-ARC METHOD)
• ASTM D4798/D4798M : EN-Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4799 : 가속 풍화 시험 조건 및 역청 재료 절차에 대한 EN-표준 시험 방법 (형광 UV 및 결로 방법)
• ASTM D480 : 샘플링 및 박편 알루미늄 분말 및 페이스트의 테스트를위한 EN-표준 시험 방법
• ASTM의 D4800 : 분류하고 지정 접착제를위한 EN-표준 가이드
• ASTM의 D4801 : 두께의 폴리에틸렌 시트를 깔기위한 EN-표준 사양 0.25 mm [0.010 in.] 그리고 큰
• ASTM D4802 : EN-Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
• ASTM D4802의 REV A를 : EN-STANDARD SPECIFICATION FOR POLY(메타 크릴 산 메틸) 아크릴 플라스틱 시트
• ASTM의 D4803 : EN-표준 시험 방법 PVC 건물 제품에 열 상승을 예측
• ASTM의 D4804 : EN-표준 시험 방법 연식 고체 플라스틱의 난연성 특성을 결정하는
• ASTM의 D4805 : 플라스틱 표준을위한 EN-표준 용어
• ASTM의 D4806 : EN-Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM D4806 REV A : EN-STANDARD SPECIFICATION FOR DENATURED FUEL ETHANOL FOR BLENDING WITH GASOLINES FOR USE AS AUTOMOTIVE SPARK-IGNITION ENGINE FUEL
• ASTM D4806 REV B : EN-Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM D4806 REV C : EN-Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
• ASTM D4807 : EN-Standard Test Method for Sediment in Crude Oil by Membrane Filtration-Designation: Manual of Petroleum Measurement Standards (MPMS) Chapter 10.8
• ASTM D4808 : EN-Standard Test Methods for Hydrogen Content of Light Distillates Middle Distillates Gas Oils and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
• ASTM D4809 : EN-Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
• ASTM D4809 REV A : EN-Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
• ASTM D4810 : EN-Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
• ASTM D4811 : EN-Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing
• ASTM D4812 : EN-Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics
• ASTM D4814 : EN-Standard Specification for Automotive Spark-Ignition Engine Fuel
• ASTM D4814 REV A : EN-Standard Specification for Automotive Spark-Ignition Engine Fuel
• ASTM D4814 REV B : EN-Standard Specification for Automotive Spark-Ignition Engine Fuel
• ASTM D4814 REV C : EN-STANDARD SPECIFICATION FOR AUTOMOTIVE SPARK-IGNITION ENGINE FUEL
• ASTM의 D4815 : EN-STANDART TEST METHOD FOR DETERMINATION OF MTBE ETBE TAME DIPE TERTIARY-AMYL ALCOHOL AND C1 TO C4 ALCOHOLS IN GASOLINE BY GAS CHROMATOGRAPHY
• ASTM D4815 REV A : EN-Standard Test Method for Determination of MTBE ETBE TAME DIPE tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
• ASTM D4816 : EN-STANDARD TEST METHOD FOR SPECIFIC HEAT OF AIRCRAFT TURBINE FUELS BY THERMAL ANALYSIS
• ASTM D4817 : EN-Standard Classification for Rubber Compounding MaterialsStearic Acid
• ASTM D4818 : EN-STANDARD PRACTICE FOR DESCRIPTION OF RUBBER COMPOUNDING MATERIAL 2-BENZOTHIAZYL SULFENAMIDE VULCANIZATION ACCELERATORS
• ASTM D4819 : EN-Standard Specification for Flexible Cellular Materials Made from Polyolefin Plastics
• ASTM D482 : EN-Standard Test Method for Ash from Petroleum Products-IP Designation: 4/96; British Standard 4450
• ASTM D482 REV A : EN-Standard Test Method for Ash from Petroleum Products-IP Designation: 4/96; British Standard 4450
• ASTM D4820 : EN-Standard Test Methods for Carbon Black – Surface Area by Multipoint B.E.T. Nitrogen Adsorption
• ASTM D4820 REV A : EN-Standard Test Methods for Carbon Black – Surface Area by Multipoint B.E.T. Nitrogen Adsorption
• ASTM D4820 REV B : EN-STANDARD TEST METHODS FOR CARBON BLACK – SURFACE AREA BY MULTIPOINT B.E.T. NITROGEN ADSORPTION
• ASTM D4821 : EN-Standard Guide for Carbon Black-Validation of Test Method Precision and Bias
• ASTM D4821 REV A : EN-Standard Guide for Carbon Black – Validation of Test Method Precision and Bias
• ASTM D4821 REV B : EN-STANDARD GUIDE FOR CARBON BLACK – VALIDATION OF TEST METHOD PRECISION AND BIAS
• ASTM D4822 : EN-Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
• ASTM D4823 : EN-Standard Guide for Core Sampling Submerged Unconsolidated Sediments
• ASTM D4824 : EN-Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
• ASTM D4825 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF CURL IN CUT-SIZED OFFICE PAPER
• ASTM D4826 : EN-Standard Practice for Units of Measurement and Conversion Factors for Pulp Paper and Paperboard
• ASTM D4827 : EN-STANDARD TEST METHOD FOR DETERMINING THE UNREACTED MONOMER CONTENT OF LATEXES USING CAPILLARY COLUMN GAS CHROMATOGRAPHY
• ASTM D4828 : EN-Standard Test Methods for Practical Washability of Organic Coatings
• ASTM D4829 : EN-Standard Test Method for Expansion Index of Soils
• ASTM D4829 REV A : EN-Standard Test Method for Expansion Index of Soils
• ASTM D483 : EN-UNSULFONATED RESIDUE OF PETROLEUM PLANT SPRAY OILS TEST METHOD FOR (R 1978)
• ASTM D4830 : EN-Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
• ASTM D4831 : EN-Standard Test Method for Buckle Tear Strength of Leather
• ASTM D4832 : EN-STANDARD TEST METHOD FOR PREPARATION AND TESTING OF SOIL-CEMENT SLURRY TEST CYLINDERS
• ASTM D4833 : EN-Standard Test Method for Index Puncture Resistance of Geotextiles Geomembranes and Related Products
• ASTM D4834 : EN-Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
• ASTM D4835 : EN-Standard Specification for Propylene Glycol Monomethyl Ether Acetate
• ASTM D4836 : EN-Standard Specification for Dipropylene Glycol Monomethyl Ether
• ASTM D4837 : EN-Standard Specification for Propylene Glycol Monomethyl Ether
• ASTM D4838 : EN-Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
• ASTM D4839 : EN-STANDARD TEST METHOD FOR TOTAL CARBON AND ORGANIC CARBON IN WATER BY ULTRA-VIOLET OR PERSULFATE OXIDATION OR BOTH AND INFRARED DETECTION
• ASTM D484 : EN-Standard Specification for STODDARD SOLVENT
• ASTM D4840 : EN-Standard Practice for Sampling Chain-Of-Custody Procedures
• ASTM D4841 : EN-Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
• ASTM D4842 : EN-Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
• ASTM D4843 : EN-Standard Test Method for Wetting and Drying Test of Solid Wastes
• ASTM D4844 : EN-Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
• ASTM D4845 : EN-Standard Terminology Relating to Wool
• ASTM D4846 : EN-Standard Test Method for Resistance to Unsnapping of Snap Fasteners
• ASTM D4847 : EN-STANDARD SPECIFICATION FOR WOVEN AWNING AND CANOPY FABRICS
• ASTM D4847 REV A : EN-Standard Specification for Woven Awning and Canopy Fabrics
• ASTM D4848 : EN-STANDARD TERMINOLOGY RELATING TO TENSILE PROPERTIES OF TEXTILES
• ASTM D4848 REV A : EN-STANDARD TERMINOLOGY RELATING TO TENSILE PROPERTIES OF TEXTILES
• ASTM D4848 REV B : EN-STANDARD TERMINOLOGY OF FORCE DEFORMATION AND RELATED PROPERTIES OF TEXTILES
• ASTM D4849 : EN-STANDARD TERMINOLOGY RELATING TO YARN-(Discontinued 1993; No Replacement)
• ASTM D4849 REV A : EN-Standard Terminology Relating to Yarns and Fibers-(Reinstated)
• ASTM D4849 REV B : EN-Standard Terminology Relating to Yarns and Fibers
• ASTM D4850 : EN-Standard Terminology Relating to Fabrics and Fabric Test Methods
• ASTM D4850 REV A : EN-Standard Terminology Relating to Fabric
• ASTM D4851 : EN-Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
• ASTM D4852 : EN-Standard Practice for Evaluation of Attached Upholstery Fabrics
• ASTM D4853 : EN-STANDARD GUIDE FOR REDUCING TEST VARIABILITY
• ASTM D4854 : EN-STANDARD GUIDE FOR ESTIMATING THE MAGNITUDE OF VARIABILITY FROM EXPECTED SOURCES IN SAMPLING PLANS
• ASTM D4855 : EN-STANDARD PRACTICE FOR COMPARING TEST METHODS
• ASTM D4856 : EN-Standard Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion Chromatographic)
• ASTM D4857 : EN-Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
• ASTM D4857 REV A : EN-Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
• ASTM D4858 : EN-Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
• ASTM D4859 : EN-Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
• ASTM D4860 : EN-Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
• ASTM D4861 : EN-Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
• ASTM D4861 REV A : EN-Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
• ASTM D4862 : EN-STANDARD TEST METHOD FOR EVALUATING HYDRAULIC TRANSMISSION FLUID ANTIWEAR PROPERTIES
• ASTM D4863 : EN-Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
• ASTM D4880 : EN-Standard Test Method for Salt Water Proofness of Insulating Varnishes over Enamelled Magnet Wire
• ASTM D4881 : EN-STANDARD TEST METHOD FOR THERMAL ENDURANCE OF VARNISHED-FIBROUS OR FILM-WRAPPED MAGNET WIRE
• ASTM D4882 : EN-STANDARD TEST METHOD FOR BOND STRENGTH OF ELECTRICAL INSULATING VARNISHES BY THE TWISTED-COIL TEST
• ASTM D4883 : EN-Standard Test Method for Density of Polyethylene by the Ultrasound Technique
• ASTM D4884 : EN-Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
• ASTM D4885 : EN-Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
• ASTM D4886 : EN-Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)-E1
• ASTM D4887 : EN-Standard Test Method for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
• ASTM D4888 : EN-Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
• ASTM D4889 : 폴리 우레탄 원료 EN-표준 시험 방법: DETERMINATION OF VISCOSITY OF CRUDE OR MODIFIED ISOCYANATES
• ASTM의 D4890 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: Determination of Gardner and APHA Color of Polyols
• ASTM D4891 : EN-Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
• ASTM D4892 : EN-Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
• ASTM D4893 : EN-STANDARD TEST METHOD FOR DETERMINATION OF PITCH VOLATILITY
• ASTM D4894 : 폴리 테트라 플루오로 에틸렌을위한 EN-표준 사양 (PTFE) GRANULAR MOLDING AND RAM EXTRUSION MATERIALS
• ASTM D4894 REV A : EN-Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
• ASTM D4895 : EN-Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced from Dispersion
• ASTM D4895 REV A : 폴리 테트라 플루오로 에틸렌을위한 EN-표준 사양 (PTFE) RESIN PRODUCED FROM DISPERSION
• ASTM D4896 : EN-Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
• ASTM D4897 : EN-Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
• ASTM D4897 REV A : EN-Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
• ASTM D4897/D4897M : EN-Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
• ASTM의 D4898 : EN-Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
• ASTM D4899 : EN-Standard Practice for Analysis of Vegetable Tanning Materials – General
• ASTM D49 : EN-Standard Test Methods of Chemical Analysis of Red Lead
• ASTM D490 : EN-Standard Specification for Road Tar
• ASTM D4900 : EN-Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
• ASTM D4901 : EN-Standard Practice for Preparation of Solution of Liquid Vegetable Tanning Extracts
• ASTM D4902 : EN-Standard Test Method for Evaporation and Drying of Analytical Solutions
• ASTM D4903 : EN-Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
• ASTM D4904 : EN-Standard Practice for Cooling of Analytical Solutions
• ASTM D4905 : EN-Standard Practice for Preparation of Solution of Solid Pasty and Powdered Vegetable Tannin Extracts
• ASTM D4906 : EN-Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
• ASTM D4907 : EN-Standard Test Method for Nitrocellulose in Finish on Leather
• ASTM D4908 : EN-Standard Test Method for Tackiness of Finish on Leather
• ASTM D4909 : EN-Standard Test Method for Color Stability of Vinyl-Coated Glass Textiles to Accelerated Weathering
• ASTM D491 : EN-STANDARD SPECIFICATION FOR ASPHALT MASTIC USED IN WATERPROOFING
• ASTM D4910 : EN-Standard Tables of Body Measurements for Infants Sizes 0 에 24
• ASTM D4910 REV A : EN-Standard Tables of Body Measurements for Infants Sizes 0 에 24 달
• ASTM D4911 : EN-Standard Tolerances for Yarns Made of Man-Made Fibers and Spun on the Parallel Worsted or Modified Worsted System
• ASTM D4912 : EN-Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
• ASTM D4913 : EN-Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading Length of Stain Visual Chemical Detectors
• ASTM D4914 : EN-Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
• ASTM D4915 : EN-Standard Practice for Manual Sampling of Coal from Tops of Railroad Cars
• ASTM D4916 : EN-Standard Practice for Mechanical Auger Sampling
• ASTM D4917 : EN-Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method
• ASTM D4918 : EN-Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method
• ASTM D4919 : EN-Standard Specification for Testing of Hazardous Materials Packagings
• ASTM D4920 : EN-STANDARD TERMINOLOGY RELATING TO MOISTURE IN TEXTILES
• ASTM D4920 REV A : EN-Standard Terminology Relating to Moisture in Textiles
• ASTM D4920 REV B : EN-Standard Terminology Relating to Moisture in Textiles
• ASTM D4921 : EN-Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
• ASTM D4922 : EN-Standard Test Method for Determination of Radioactive Iron in Water
• ASTM D4923 : EN-Standard Specification for Reinforced Thermosetting Plastic Poles
• ASTM D4924 : EN-Standard Classification for Petroleum Waxes for Use in Rubber Compounding
• ASTM D4925 : EN-Standard Test Method for Flexibility and Adhesion of Finish on Leather
• ASTM D4926 : EN-Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-Ray Powder Diffraction
• ASTM의 D4927 : EN-Standard Test Methods for Elemental Analysis of Lubricant and Additive Components-Barium Calcium Phosphorus Sulfur and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
• ASTM D4928 : EN-Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration-Designation: 386/99; Designation: Manual of Petroleum Measurement Standards (MPMS) Chapter 10.9
• ASTM의 D4929 : EN-Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
• ASTM D4930 : EN-Standard Test Method for Dust Control Material on Calcined Petroleum Coke
• ASTM D4931 : EN-STANDARD TEST METHOD FOR GROSS MOISTURE IN GREEN PETROLEUM COKE
• ASTM D4932 : EN-Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets Roll Roofing and Shingles
• ASTM D4933 : EN-Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
• ASTM D4934 : EN-Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide AcceleratorsInsolubles
• ASTM D4935 : EN-Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials-Replaces ES7
• ASTM D4936 : EN-Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
• ASTM D4937 : EN-Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
• ASTM D4938 : EN-Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
• ASTM D4939 : EN-Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
• ASTM D494 : EN-Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products-Reinstated
• ASTM D4940 : EN-Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
• ASTM D4941 : EN-Standard Practice for Preparing Drawdowns of Artists’ Paste Paints
• ASTM D4942 : EN-Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
• ASTM D4943 : EN-Standard Test Method for Shrinkage Factors of Soils by the Wax Method
• ASTM D4944 : EN-Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
• ASTM D4945 : EN-Standard Test Method for High-Strain Dynamic Testing of Piles
• ASTM D4946 : EN-Standard Test Method for Blocking Resistance of Architectural Paints
• ASTM D4947 : EN-Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air
• ASTM D4948 : EN-Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
• ASTM D4949 : EN-Standard Test Method for Determination of D-C Resistivity of Writing Paper (Keithley Method)
• ASTM D495 : EN-Standard Test Method for High-Voltage Low-Current Dry Arc Resistance of Solid Electrical Insulation
• ASTM의 D4950 : EN-Standard Classification and Specification for Automotive Service Greases
• ASTM D4951 : EN-STANDARD TEST METHOD FOR DETERMINATION OF ADDITIVE ELEMENTS IN LUBRICATING OILS BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY
• ASTM D4951 REV A : EN-Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
• ASTM의 D4952 : EN-STANDARD TEST METHOD FOR QUALITATIVE ANALYSIS FOR ACTIVE SULFUR SPECIES IN FUELS AND SOLVENTS (DOCTOR TEST)
• ASTM D4953 : EN-Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
• ASTM D4953 REV A : EN-Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
• ASTM D4954 : EN-Standard Test Method for Determination of Nitrilotriacetates in Detergents
• ASTM D4955 : EN-Standard Practice for Field Evaluation of Automotive Polish
• ASTM D4956 : EN-Standard Specification for Retroreflective Sheeting for Traffic Control
• ASTM D4956 REV A : EN-STANDARD SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL
• ASTM D4956 REV B : EN-STANDARD SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL (AASHTO M268)
• ASTM D4957 : EN-Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer-No Replacement
• ASTM D4958 : EN-STANDARD TEST METHOD FOR COMPARISON OF THE BRUSH DRAG OF LATEX PAINTS
• ASTM D4959 : EN-Standard Test Method for Determination of Water (Moisture) Content of Soil by Direct Heating
• ASTM D496 : EN-Standard Specification for Chip Soap
• ASTM D4960 : EN-Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
• ASTM D4961 : EN-Standard Test Methods for Gas Chromatographic Analysis of Major Organic Impurities in Phenol Produced by the Cumene Process
• ASTM D4962 : EN-Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
• ASTM D4963 : EN-Standard Test Method for Ignition Loss of Glass Strands and Fabrics
• ASTM D4964 : EN-Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
• ASTM D4965 : EN-Standard Terminology of Seams and Seam Finishes Used in Home Sewing
• ASTM D4965 REV A : EN-STANDARD TERMINOLOGY OF SEAMS AND SEAM FINISHES IN HOME SEWING
• ASTM D4965 REV B : EN-STANDARD TERMINOLOGY OF SEAMS AND SEAM FINISHES IN HOME SEWING
• ASTM D4966 : EN-Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
• ASTM D4967 : EN-Standard Guide for Selecting Materials to Be Used for Insulation Jacketing and Strength Components in Fiber-Optic Cables
• ASTM D4968 : EN-Standard Guide to Using the Flow Chart for Annual Review of Standards Including the Model Precision and Bias Statement for Plastics
• ASTM D4969 : EN-STANDARD SPECIFICATION FOR PTFE COATED GLASS FABRIC
• ASTM D4969 REV A : EN-Standard Specification for PTFE Coated Glass Fabric
• ASTM D497 : EN-Standard Specification for Ordinary Laundry Bar Soap
• ASTM D4970 : EN-Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics: Martindale Tester
• ASTM D4971 : EN-Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
• ASTM D4972 : EN-STANDARD TEST METHOD FOR PH OF SOILS
• ASTM D4972 REV A : EN-Standard Test Method for pH of Soils
• ASTM D4973 : EN-Standard Specification for White Rigid Poly(염화 비닐) (PVC) Insulating Storm Windows
• ASTM D4974 : EN-Standard Test Method for Thermal Shrinkage of Yarn and Cord Using the Testrite Thermal Shrinkage Oven
• ASTM D4975 : EN-Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
• ASTM D4975 REV A : EN-Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
• ASTM D4976 : EN-Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
• ASTM D4976 REV A : EN-Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
• ASTM D4976 REV B : EN-Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
• ASTM D4977 : EN-Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
• ASTM D4977 REV B : EN-Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
• ASTM D4978 : EN-STANDARD TEST METHODS FOR SCREENING OF SULFIDES IN WASTE
• ASTM D4979 : EN-Standard Test Method for Physical Description Screening Analysis in Waste
• ASTM D498 : EN-Standard Specification for Powdered Soap (Nonalkaline Soap Powder)
• ASTM D4980 : EN-Standard Test Methods for Screening of pH in Waste
• ASTM D4981 : EN-Standard Test Method for Screening of Oxidizers in Waste
• ASTM D4982 : EN-Standard Test Methods for Flammability Potential Screening Analysis of Waste
• ASTM D4983 : EN-Standard Test Method for Cyclohexylamine Morpholine and Diethylaminoethanol in Water and Condensed Steam by Direct Aqueous Injection Gas Chromatography
• ASTM D4984 : EN-Standard Test Method for Carbon Dioxide in Natural Gas Using Length-Of-Stain Detector Tubes
• ASTM D4985 : EN-STANDARD SPECIFICATION FOR LOW SILICATE ETHYLENE GLYCOL BASE ENGINE COOLANT FOR HEAVY DUTY ENGINES REQUIRING AN INITIAL CHARGE OF SUPPLEMENTAL COOLANT ADDITIVE (SCA) (E-1 1989)
• ASTM D4985 REV A : EN-Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
• ASTM D4986 : EN-Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
• ASTM D4987 : EN-Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
• ASTM D4988 : EN-STANDARD TEST METHOD FOR DETERMINATION OF CALCIUM CARBONATE CONTENT OF PAPER
• ASTM D4988 REV A : EN-STANDARD TEST METHOD FOR DETERMINATION OF ALKALINITY OF PAPER AS CALCIUM CARBONATE (ALKALINE RESERVE OF PAPER)
• ASTM D4989 : EN-STANDARD TEST METHOD FOR VISCOSITY OF ROOFING BITUMENS USING THE PARALLEL PLATE PLASTOMETER
• ASTM D4989 REV A : EN-Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer-E1
• ASTM D499 : EN-Standard Specification for White Floating Toilet Soap
• ASTM D4990 : EN-Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
• ASTM D4990 REV A : EN-Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
• ASTM D4991 : EN-Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
• ASTM D4992 : EN-Standard Practice for Evaluation of Rock to Be Used for Erosion Control
• ASTM D4993 : EN-Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis
• ASTM D4994 : EN-Standard Practice for Recovery of Viruses from Wastewater Sludges
• ASTM D4995 : EN-Standard Specifications for Electronic and Degreasing Grades of 112-Trichloro 122-Trifluoroethane Solvent
• ASTM D4998 : EN-Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
• ASTM D4999 : EN-STANDARD TEST METHOD FOR EVALUATION OF FLUIDS FOR EFFECTS ON FRICTION OF WET BRONZE-FACED FRICTION BRAKES
• ASTM D5 : EN-Standard Test Method for Penetration of Bituminous Materials
• ASTM D5 REV A : EN-Standard Test Method for Penetration of Bituminous Materials
• ASTM D50 : EN-Standard Test Methods for Chemical Analysis of Yellow Orange Red and Brown Pigments Containing Iron and Manganese
• ASTM D500 : EN-Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
• ASTM D5000 : EN-Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
• ASTM D5001 : EN-Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
• ASTM D5001 REV A : EN-Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-On-Cylinder Lubricity Evaluator (BOCLE)
• ASTM의 D5002 : EN-STANDARD TEST METHOD FOR DENSITY AND RELATIVE DENSITY OF CRUDE OILS BY DIGITAL DENSITY ANALYZER
• ASTM D5003 : EN-Standard Test Method for the Hardgrove Grindability Index (HGI) of Petroleum Coke
• ASTM D5003 REV A : EN-Standard Test Method for the Hardgrove Grindability Index (HGI) of Petroleum Coke
• ASTM D5004 : EN-Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
• ASTM D5005 : EN-STANDARD TEST METHOD FOR EVALUATION OF FLUIDS FOR EFFECTS ON FRICTION AND WEAR OF WET CLUTCHES
• ASTM D5006 : EN-Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
• ASTM D5007 : EN-Standard Test Method for Wet-to-Dry Hiding Change
• ASTM D5008 : EN-Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol by Gas Chromatography
• ASTM D5009 : EN-Standard Test Method for Evaluating and Comparing Transfer Efficiency Under Laboratory Conditions
• ASTM D501 : EN-Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents-(Discontinued 2001; No Replacement)
• ASTM D5010 : EN-Standard Guide for Testing Printing Inks and Related Materials
• ASTM D5010 REV A : EN-Standard Guide for Testing Printing Inks and Related Materials
• ASTM D5011 : EN-STANDARD PRACTICES FOR THE CALIBRATION OF OZONE MONITORS USING TRANSFER STANDARDS
• ASTM D5012 : EN-Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
• ASTM D5013 : EN-Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
• ASTM D5014 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF FORMALDEHYDE IN INDOOR AIR (PASSIVE SAMPLER METHODOLOGY)
• ASTM D5015 : EN-Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
• ASTM D5016 : EN-Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
• ASTM D5016 REV A : EN-Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High- Temperature Tube Furnace Combustion Method with Infrared Absorption
• ASTM D5017 : EN-Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
• ASTM D5018 : EN-Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
• ASTM D5019 : EN-Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane
• ASTM D5019 REV A : EN-Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
• ASTM D502 : EN-Standard Test Method for Particle Size of Soaps and Other Detergents
• ASTM D502 REV A : EN-STANDARD TEST METHOD FOR PARTICLE SIZE OF SOAPS AND OTHER DETERGENTS
• ASTM D5020 : EN-STANDARD TEST METHOD FOR CHLOROFLUOROCARBON ACTIVITY OF ACTIVATED CARBON
• ASTM D5021 : EN-Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA)
• ASTM D5022 : EN-STANDARD SPECIFICATION FOR IDENTIFICATION OF VIALS AND AMPOULES CONTAINING CONCENTRATED SOLUTIONS OF DRUGS TO BE DILUTED BEFORE USE
• ASTM D5023 : EN-Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
• ASTM D5023 REV A : EN-Standard Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending
• ASTM D5024 : EN-Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
• ASTM D5024 REV A : EN-Standard Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Compression
• ASTM D5025 : EN-Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
• ASTM D5026 : EN-Standard Test Method for Plastics: Dynamic Mechanical Properties: in Tension
• ASTM D5026 REV A : EN-Standard Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Tension
• ASTM D5028 : EN-STANDARD TEST METHOD FOR CURING PROPERTIES OF PULTRUSION RESINS BY THERMAL ANALYSIS
• ASTM D5029 : EN-Standard Test Method for Water Solubles in Activated Carbon
• ASTM D5030 : EN-Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit-Withdrawn 2003; No Replacement
• ASTM D5031 : EN-Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
• ASTM D5032 : EN-Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
• ASTM D5033 : EN-Standard Guide for Development of Standards Relating to the Proper Use of Recycled Plastics
• ASTM D5034 : EN-Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
• ASTM D5035 : EN-Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
• ASTM D5036 : EN-Standard Practice for Application of Fully Adhered Single Ply Poly(염화 비닐) Roof Sheeting
• ASTM D5037 : EN-Standard Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography
• ASTM D5038 : EN-Standard Terminology of Textile Conservation
• ASTM D5039 : EN-Standard Test Methods for Identification of Wire Side of Paper-TAPPI T 455
• ASTM D5040 : EN-Standard Test Methods for Ash Content of Adhesives
• ASTM D5041 : EN-STANDARD TEST METHOD FOR FRACTURE STRENGTH IN CLEAVAGE OF ADHESIVES IN BONDED JOINTS
• ASTM D5041 REV A : EN-STANDARD TEST METHOD FOR FRACTURE STRENGTH IN CLEAVAGE OF ADHESIVES IN BONDED JOINTS
• ASTM D5041 REV B : EN-Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
• ASTM D5042 : EN-Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
• ASTM D5043 : EN-Standard Test Methods for Field Identification of Coatings-Reinstated 2004
• ASTM D5044 : EN-Standard Test Method for Rubber Compounding MaterialsFree 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
• ASTM D5045 : EN-STANDARD TEST METHODS FOR PLANE-STRAIN FRACTURE TOUGHNESS AND STRAIN ENERGY RELEASE RATE OF PLASTIC MATERIALS
• ASTM D5045 REV A : EN-STANDARD TEST METHODS FOR PLANE-STRAIN FRACTURE TOUGHNESS AND STRAIN ENERGY RELEASE RATE OF PLASTIC MATERIALS
• ASTM D5046 : EN-Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs)
• ASTM D5047 : EN-Standard Specification for Polyethylene Terephthalate Film and Sheeting
• ASTM D5048 : EN-Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
• ASTM D5049 : EN-Standard Test Method for the Screening of Cyanides in Waste
• ASTM D5050 : EN-Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
• ASTM D5051 : EN-Standard Test Method for Rubber Compounding MaterialsBenzothiazyl Disulfide (MBTS)Assay
• ASTM D5052 : EN-Standard Test Method for Permeability of Leather to Water Vapor
• ASTM D5053 : EN-STANDARD TEST METHOD FOR RESISTANCE TO CROCKING OF LEATHER
• ASTM D5054 : EN-Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-otolyl-guanidine (DOTG) Assay
• ASTM D5055 : EN-Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
• ASTM D5055 REV A : EN-Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
• ASTM D5056 : EN-Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
• ASTM D5057 : EN-Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
• ASTM D5058 : EN-Standard Test Methods for Compatibility of Screening Analysis of Waste
• ASTM D5059 : EN-Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy-IP Designation: 228/79;
• ASTM D5060 : EN-STANDARD TEST METHOD FOR DETERMINING IMPURITIES IN HIGH-PURITY ETHYLBENZENE BY GAS CHROMATOGRAPHY
• ASTM D5061 : EN-Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
• ASTM D5062 : EN-Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
• ASTM D5063 : EN-Standard Guide for Use of Certification of Coating Conformance Form
• ASTM D5064 : EN-Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
• ASTM D5065 : EN-STANDARD GUIDE FOR ASSESSING THE CONDITION OF AGED COATINGS ON STEEL SURFACES
• ASTM D5066 : EN-Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints – Weight Basis
• ASTM D5067 : EN-Standard Specification for Artists’ Watercolor Paints
• ASTM D5067 REV A : EN-Standard Specification for Artists’ Watercolor Paints
• ASTM D5068 : EN-Standard Practice for Preparation of Paint Brushes for Evaluation
• ASTM D5069 : EN-Standard Practice for Preparation of Paint-Roller Covers for Evaluation
• ASTM D5070 : EN-Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
• ASTM D5071 : EN-Standard Practice for Operating Xenon ARC- Type Exposure Apparatus with Water for Exposure of Photodegradable Plastics
• ASTM D5072 : EN-Standard Test Method for Radon in Drinking Water
• ASTM D5073 : EN-Standard Practice for Depth Measurement of Surface Water
• ASTM D5074 : EN-Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
• ASTM D5075 : EN-STANDARD TEST METHOD FOR NICOTINE IN INDOOR AIR
• ASTM D5075 REV A : EN-STANDARD TEST METHOD FOR NICOTINE IN INDOOR AIR
• ASTM D5076 : EN-Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes-E1
• ASTM D5077 : EN-Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
• ASTM D5078 : EN-Standard Specification for Crack Filler Hot-Applied for Asphalt Concrete and Portland Cement Concrete Pavements
• ASTM D5079 : EN-Standard Practices for Preserving and Transporting Rock Core Samples
• ASTM D5080 : EN-Standard Test Method for Rapid Determination of Percent Compaction
• ASTM D5081 : EN-Standard Test Method for Aggregate Layer Hiding Power-E1
• ASTM D5082 : EN-Standard Practice for the Application of Intermittently Attached Single-Ply Poly(염화 비닐) Sheet Roofing
• ASTM D5083 : EN-Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
• ASTM D5083 REV A : EN-STANDARD TEST METHOD FOR TENSILE PROPERTIES OF REINFORCED THERMOSETTING PLASTICS USING STRAIGHT- SIDED SPECIMENS
• ASTM D5084 : EN-Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
• ASTM의 D5085 : 대기압 WET 증착에 의해 화학적으로 클로라이드, 질산, 황산 판정 EN-STANDARD FOR TEST 방법은 이온 크로마토 그래피 억제
• ASTM의 D5086 : 대기압 WET 증착 FLAME 원자 흡광 광도법에 칼슘 마그네슘 나트륨 칼륨 및 판정 EN-STANDARD FOR 시험 방법
• ASTM의 D5087 : 휘발성 유기 화합물의 양을 결정하기위한 EN-표준 시험 방법 (VOC) VOC 제어 장치는 제거를위한 유성 자동차 코팅 해제 및 AVAILABLE (감소)
• ASTM의 D5088 : 폐기물 사이트에서 사용하는 필드 장비의 오염 제거를위한 EN-표준 사례
• ASTM의 D5089 : 전자기 현재 미터 오픈 채널에서 물의 속도 측정을위한 EN-표준 시험 방법
• ASTM D509 : 샘플링 및 등급 로진의 EN-표준 시험 방법
• ASTM의 D5090 : EN-Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
• ASTM D5091 : EN-STANDARD GUIDE FOR WATER ANALYSIS FOR ELECTRODIALYSIS/ ELECTRODIALYSIS REVERSAL APPLICATIONS
• ASTM D5092 : EN-Standard Practice for Design and Installation of Ground Water Monitoring Wells
• ASTM D5093 : EN-Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
• ASTM D5094 : EN-Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
• ASTM D5094/D5094M : EN-Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
• ASTM D5095 : EN-STANDARD TEST METHOD FOR DETERMINATION OF THE NONVOLATILE CONTENT IN SILANES SILOXANES AND SILANE-SILOXANE BLENDS USED IN MASONRY WATER REPELLENT TREATMENTS
• ASTM D5096 : EN-STANDARD TEST METHOD FOR DETERMINING THE PERFORMANCE OF A CUP ANEMOMETER OR PROPELLER ANEMOMETER
• ASTM D5097 : EN-Standard Test Method for Filter-Retained Solids Content of Polymer Latexes
• ASTM D5098 : EN-Standard Specification for Artists’ Acrylic Emulsion Paints
• ASTM D5098 REV A : EN-STANDARD SPECIFICATION FOR ARTISTS’ ACRYLIC EMULSION PAINTS
• ASTM D5099 : EN-Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
• ASTM D5100 : EN-STANDARD TEST METHOD FOR ADHESION OF MINERAL AGGREGATE TO HOT BITUMEN
• ASTM D5100 REV A : EN-Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen-E1
• ASTM D5100/D5100M REV A : EN-Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
• ASTM D5101 : EN-Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
• ASTM D5102 : EN-Standard Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
• ASTM D5103 : EN-Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
• ASTM D5104 : EN-Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
• ASTM D5105 : EN-Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
• ASTM D5106 : EN-Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
• ASTM D5107 : EN-Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
• ASTM D5108 : EN-Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
• ASTM D5109 : EN-STANDARD TEST METHODS FOR COPPER-CLAD THERMOSETTING LAMINATES FOR PRINTED WIRING BOARDS
• ASTM D511 : EN-STANDARD TEST METHODS FOR CALCIUM AND MAGNESIUM IN WATER
• ASTM D5110 : EN-Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
• ASTM D5111 : EN-Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
• ASTM D5112 : EN-Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
• ASTM D5113 : EN-Standard Test Method for Determining Adhesive Attack on Rigid Cellular Polystyrene Foam
• ASTM D5114 : EN-Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
• ASTM D5115 : EN-Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
• ASTM D5116 : EN-Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products1
• ASTM D5117 : EN-Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
• ASTM D5118/D5118M : EN-STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES
• ASTM D5118/D5118M REV A : EN-Standard Practice for Fabrication of Fiberboard Shipping Boxes
• ASTM D5119 : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
• ASTM D5119 REV A : EN-Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
• ASTM D512 : EN-Standard Test Methods for Chloride Ion in Water
• ASTM D5120 : EN-Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
• ASTM D5121 : EN-Standard Practice for Preparation of Rock Slabs for Durability Testing
• ASTM D5124 : EN-Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
• ASTM D5125 : EN-Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
• ASTM D5126 : EN-Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
• ASTM D5127 : EN-Standard Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry
• ASTM D5128 : EN-Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
• ASTM D5129 : EN-Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
• ASTM D513 : EN-Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
• ASTM D5130 : EN-Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
• ASTM D5131 : EN-Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
• ASTM D5132 : EN-Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
• ASTM의 D5133 : EN-Standard Test Method for Low Temperature Low Shear Rate Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
• ASTM D5134 : EN-Standard Test Method for Detailed Analysis of Petroleum Naphthas Through n-Nonane by Capillary Gas Chromatography
• ASTM D5135 : EN-STANDARD TEST METHOD FOR ANALYSIS OF STYRENE BY CAPILLARY GAS CHROMATOGRAPHY
• ASTM D5136 : EN-Standard Specification for High Purity p-Xylene
• ASTM D5137 : EN-STANDARD SPECIFICATION FOR HEXYL ACETATE
• ASTM D5138 : EN-Standard Specification for Liquid Crystal Polymers
• ASTM D5138 REV A : EN-Standard Specification for Liquid Crystal Polymers
• ASTM D5139 : EN-Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
• ASTM D514 : EN-Standard Test Method for Hydroxide Ion in Water
• ASTM D5140 : EN-Standard Guide for Testing Polyurethane “Poured in Place” Thermal Break Materials
• ASTM D5141 : EN-Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device Using Site-Specific Soil
• ASTM D5142 : EN-Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
• ASTM D5142 REV A : EN-Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
• ASTM D5143 : EN-Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
• ASTM D5144 : EN-Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants-Replaces D3842-86
• ASTM D5145 : EN-Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
• ASTM D5146 : EN-Standard Guide to Testing Solvent-Borne Architectural Coatings
• ASTM D5147 : EN-STANDARD TEST METHODS FOR SAMPLING AND TESTING MODIFIED BITUMINOUS SHEET MATERIAL
• ASTM D5147 REV A : EN-Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• ASTM D5147 REV B : EN-Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• ASTM D5148 : EN-STANDARD TEST METHOD FOR CENTRIFUGE KEROSINE EQUIVALENT
• ASTM D5149 : EN-Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
• ASTM D515 : EN-Standard Test Methods for Phosphorus in Water
• ASTM D5150 : EN-Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
• ASTM D5151 : EN-STANDARD TEST METHOD FOR DETECTION OF HOLES IN MEDICAL GLOVES
• ASTM D5152 : EN-Standard Practice for Water Extraction of Residual Solids from Degraded Plastics for Toxicity Testing
• ASTM D5153 : EN-Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
• ASTM D5154 : EN-Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test-(Discontinued 2000; No Replacement)
• ASTM D5155 : 폴리 우레탄 원료에 대한 EN-표준 시험 방법: Determination of the Isocyanate Content of Aromatic Isocyanates
• ASTM D5156 : EN-Standard Test Methods for Continuous Measurement of Ozone in Ambient Workplace and Indoor Atmospheres (Ultraviolet Absorption)
• ASTM D5157 : EN-Standard Guide for Statistical Evaluation of Indoor Air Quality Models
• ASTM D5158 : EN-STANDARD TEST METHOD FOR DETERMINATION OF THE PARTICLE SIZE OF POWDERED ACTIVATED CARBON
• ASTM D5159 : EN-Standard Test Method for Dusting Attrition of Granular Activated Carbon
• ASTM D516 : EN-STANDARD TEST METHODS FOR SULFATE ION IN WATER (E1-1982)
• ASTM D5160 : EN-Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
• ASTM D5161 : EN-Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
• ASTM D5161 REV A : EN-Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
• ASTM D5162 : EN-Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
• ASTM D5163 : EN-Standard Guide for Establishing Procedures to Monitor the Performance of Service Level l Coatings in an Operating Nuclear Power Plant
• ASTM D5163 REV A : EN-Standard Guide for Establishing Procedures to Monitor the Performance of Service Level l Coatings in an Operating Nuclear Power Plant
• ASTM D5164 : EN-Standard Specification for Propylene Glycol and Dipropylene Glycol
• ASTM D5165 : EN-Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
• ASTM D5166 : EN-Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
• ASTM D5167 : EN-Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
• ASTM D5168 : EN-Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
• ASTM D5169 : EN-Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
• ASTM D517 : EN-Standard Specification for Asphalt Plank
• ASTM D5170 : EN-Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
• ASTM D5171 : EN-Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
• ASTM D5171 REV A : EN-Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons
• ASTM D5172 : EN-Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
• ASTM D5173 : EN-Standard Test Method for on-Line Monitoring of Carbon Compounds in Water
• ASTM D5174 : EN-Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
• ASTM D5175 : EN-Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
• ASTM D5176 : EN-Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
• ASTM D5177 : EN-Standard Guide for Waste Acceptance at Hazardous Waste Incinerators
• ASTM D5178 : EN-Standard Test Method for Mar Resistance of Organic Coatings
• ASTM D5179 : EN-Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
• ASTM D5179 REV A : EN-Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
• ASTM D518 : EN-Standard Test Method for Rubber Deterioration – Surface Cracking
• ASTM D5180 : EN-STANDARD TEST METHOD FOR QUANTITATIVE TEST FOR TURBIDITY IN CLEAR LIQUIDS
• ASTM D5181 : EN-Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
• ASTM D5182 : EN-Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
• ASTM의 D5183 : EN-Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
• ASTM D5184 : EN-Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing Fusion Inductively Coupled Plasma Atomic Emission Spectrometry and Atomic Absorption Spectrometry
• ASTM의 D5185 : EN-STANDARD TEST METHOD FOR DETERMINATION OF ADDITIVE ELEMENTS WEAR METALS AND CONTAMINANTS IN USED LUBRICATING OILS BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY
• ASTM D5186 : EN-Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
• ASTM D5187 : EN-Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
• ASTM D5188 : EN-Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
• ASTM D5188 REV A : EN-Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
• ASTM D5189 : EN-STANDARD TEST METHOD FOR TEMPERATURE CORRESPONDING TO VAPOR- LIQUID RATIO OF 20 FOR GASOLINE AND GASOLINE- OXYGENATE BLENDS (폭탄 방법)
• ASTM D519 : EN-Standard Test Method for Length of Fiber in Wool Top
• ASTM D5190 : EN-STANDARD TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (AUTOMATIC METHOD)
• ASTM D5190 REV A : EN-STANDARD TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (AUTOMATIC METHOD) (PNS 1210:1994)
• ASTM의 D5191 : 석유 제품의 증기 압력에 대한 EN-표준 시험 방법 (미니 방법)
• ASTM D5191 REV A : EN-STANDARD TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) (PNS 1211:1994)
• ASTM D5192 : EN-Standard Practice for Collection of Coal Samples from Core
• ASTM D5193/D5193M : EN-Standard Test Method for Coated Fabrics-Air Retention
• ASTM D5194 : EN-Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
• ASTM D5195 : EN-Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
• ASTM D5196 : EN-Standard Guide for Biomedical Grade Water
• ASTM D5197 : EN-Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
• ASTM D5198 : EN-Standard Practice for Nitric Acid Digestion of Solid Waste
• ASTM D5199 : EN-Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
• ASTM D520 : EN-Standard Specification for Zinc Dust Pigment
• ASTM D5200 : EN-Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
• ASTM D5201 : EN-Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
• ASTM D5201 REV A : EN-Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
• ASTM D5202 : EN-Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
• ASTM D5203 : EN-STANDARD SPECIFICATION FOR POLYETHYLENE PLASTICS MOLDING AND EXTRUSION MATERIALS FROM RECYCLED POST-CONSUMER (HDPE) SOURCES
• ASTM D5204 : EN-Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
• ASTM D5205 : EN-Standard Classification System for Polyetherimide (PEI) Materials
• ASTM D5206 : EN-STANDARD TEST METHOD FOR WINDLOAD RESISTANCE OF RIGID POLY(VINYL CHLORIDE) (PVC) SIDING
• ASTM D5206 REV A : EN-Standard Test Method for Windload Resistance of Rigid Plastic Siding
• ASTM D5207 : EN-Standard Practice for Conformation of 20 과 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials
• ASTM D5208 : EN-Standard Practice for Operating Fluorescent Ultraviolet (UV) and Condensation Apparatus for Exposure of Photodegradable Plastics
• ASTM D5209 : EN-STANDARD TEST METHOD FOR DETERMINING THE AEROBIC BIODEGRADATION OF PLASTIC MATERIALS IN THE PRESENCE OF MUNICIPAL SEWAGE SLUDGE
• ASTM D521 : EN-Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
• ASTM D5210 : EN-Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
• ASTM D5211 : EN-Standard Specification for Xylenes for p-Xylene Feedstock
• ASTM D5211 REV A : EN-Standard Specification for Xylenes for p-Xylene Feedstock
• ASTM D5212 : EN-Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures
• ASTM D5213 : EN-Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
• ASTM D5214 : EN-STANDARD TEST METHOD FOR POLYIMIDE RESIN FILM FOR ELECTRICAL INSULATION AND DIELECTRIC APPLICATIONS
• ASTM D5215 : EN-STANDARD TEST METHOD FOR INSTRUMENTAL EVALUATION OF STAINING OF VINYL FLOORING BY ADHESIVES
• ASTM D5216 : EN-Standard Specification for Propylene Glycol Base Engine Coolant for Automobile and Light-Duty Service
• ASTM D5217 : EN-Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
• ASTM D5219 : EN-Standard Terminology Relating to Body Dimensions for Apparel Sizing
• ASTM D5219 REV A : EN-STANDARD TERMINOLOGY RELATING TO BODY DIMENSIONS FOR APPAREL SIZING
• ASTM D5219 REV B : EN-STANDARD TERMINOLOGY RELATING TO BODY DIMENSIONS FOR APPAREL SIZING
• ASTM D5219 REV C : EN-STANDARD TERMINOLOGY RELATING TO BODY DIMENSIONS FOR APPAREL SIZING
• ASTM D5219 REV D : EN-Standard Terminology Relating to Body Dimensions for Apparel Sizing
• ASTM D522 : EN-STANDARD TEST METHODS FOR MANDREL BEND TEST OF ATTACHED ORGANIC COATINGS
• ASTM D522 REV A : EN-Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
• ASTM D5220 : EN-Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
• ASTM D5221 : EN-Standard Test Method for Continuous Measurement of Formaldehyde in Air
• ASTM D5222 : EN-Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
• ASTM D5223 : EN-Standard Specification for Engine Coolant Grade Propylene Glycol
• ASTM D5224 : EN-Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
• ASTM D5224 REV A : EN-STANDARD PRACTICE FOR COMPRESSION MOLDING TEST SPECIMENS OF THERMOSETTING MOLDING COMPOUNDS
• ASTM D5225 : EN-Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
• ASTM D5226 : EN-Standard Practice for Dissolving Polymer Materials
• ASTM D5227 : EN-STANDARD TEST METHOD FOR THE MEASUREMENT OF HEXANE EXTRACTABLE CONTENT OF POLYOLEFINS
• ASTM D5228 : EN-Standard Test Method for Determination of the Butane Working Capacity of Activated Carbon
• ASTM D5229/D5229M : EN-Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials-E1
• ASTM D523 : EN-Standard Test Method for Specular Gloss
• ASTM D5230 : EN-Standard Test Method for Carbon Black-Automated Individual Pellet Hardness
• ASTM D5230 REV A : EN-Standard Test Method for Carbon Black-Automated Individual Pellet Crush Strength
• ASTM D5230 REV B : 카본 블랙에 대한 EN-표준 시험 방법 - 자동화 된 개별 펠렛의 경도
• ASTM의 D5230 / D5230M : 카본 블랙에 대한 EN-표준 시험 방법 - 자동화 된 개별 펠렛의 호감 강도
• ASTM의 D5231 : 처리되지 않은 도시 고형 폐기물의 조성의 결정을위한 EN-표준 시험 방법
• ASTM의 D5232 : 솔리드 반 - 고체 또는 액체 폐기 재료의 안정성과 혼 화성을 결정하는 EN-표준 시험 방법
• ASTM의 D5233 : 폐기물에 대한 단일 일괄 추출 방법에 대한 EN-표준 시험 방법
• ASTM의 D5234 : 에틸렌 제품의 분석을위한 EN-표준 가이드
• ASTM의 D5235 : 목재 제품에 코팅의 건조 도막 두께의 대한 현미경 측정을위한 EN-표준 시험 방법
• ASTM의 D5236 : 중질 탄화수소 혼합물의 증류 EN-STANDARD 시험 방법 (진공 POTSTILL의 방법)
• ASTM D5236의 REV A를 : EN-Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
• ASTM D5237 : EN-Standard Guide for Evaluating Fabric Softeners
• ASTM D5238 : EN-Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting
• ASTM D5239 : EN-Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
• ASTM D524 : EN-Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products-IP Designation: 14/94; British Standard 4451
• ASTM D5240 : EN-Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
• ASTM D5241 : EN-Standard Practice for Micro-Extraction of Water for the Analysis of Volatile and Semi-Volatile Organic Compounds in Water
• ASTM D5242 : EN-Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
• ASTM D5243 : EN-Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
• ASTM D5244 : EN-Standard Practice for Recovery of Enteroviruses from Waters
• ASTM D5245 : EN-Standard Practice for Cleaning Laboratory Glassware Plasticware and Equipment Used in Microbiological Analyses
• ASTM D5246 : EN-Standard Test Method for Isolation and Enumeration of Pseudomonas Aeruginosa from Water
• ASTM D5247 : EN-Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms
• ASTM D5248 : EN-Standard Specification for Reclaimed 112-Trichloro 122-Trifluoroethane
• ASTM D5249 : EN-Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
• ASTM D525 : EN-Standard Test Method for Oxidation Stability of Gasoline (유도 기간 방법)-IP Designation: 40/97; British Standard 4347
• ASTM D525 REV A : EN-Standard Test Method for Oxidation Stability of Gasoline (유도 기간 방법)-IP Designation: 40/97; British Standard 4347
• ASTM D5250 : EN-Standard Specification for Poly(비닐 클로라이드) Gloves for Medical Application
• ASTM D5251 : EN-Standard Practice for the Operation of the Tetrapod Walker Drum Tester
• ASTM D5251 REV A : EN-Standard Practice for the Operation of the Tetrapod Walker Drum Tester
• ASTM D5252 : EN-Standard Practice for the Operation of the Hexapod Tumble Drum Tester
• ASTM D5252 REV A : EN-Standard Practice for the Operation of the Hexapod Tumble Drum Tester
• ASTM D5253 : EN-Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture
• ASTM D5254 : EN-Standard Practice for Minimum Set of Data Elements to Identify a Ground-Water Site
• ASTM D5255 : EN-Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
• ASTM D5256 : EN-Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
• ASTM D5257 : EN-Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
• ASTM D5258 : EN-Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
• ASTM D5259 : EN-Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
• ASTM D5260 : EN-Standard Classification for Chemical Resistance of Poly(염화 비닐) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(염화 비닐) (CPVC) 화합물
• ASTM D5261 : EN-Standard Test Method for Measuring Mass per Unit Area of Geotextiles
• ASTM D5262 : EN-Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics
• ASTM D5262 REV A : EN-Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics
• ASTM D5263 : EN-Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
• ASTM D5264 : EN-Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
• ASTM D5265 : EN-Standard Test Method for Bridge Impact Testing
• ASTM D5266 : EN-Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
• ASTM D5267 : EN-Standard Test Method for Determination of Extrudability of Cartridge Adhesives
• ASTM D5268 : EN-Standard Specification for Topsoil Used for Landscaping Purposes
• ASTM D5269 : EN-Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
• ASTM D5270 : EN-Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded Nonleaky Confined Aquifers
• ASTM D5271 : EN-Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
• ASTM D5272 : EN-Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
• ASTM D5273 : EN-Standard Guide for Analysis of Propylene Concentrates
• ASTM D5274 : EN-Standard Guide for Analysis of 13-Butadiene Product
• ASTM의 D5275 : EN-Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids-Replaces D3945-93
• ASTM D5276 : EN-Standard Test Method for Drop Test of Loaded Containers by Free Fall-Replaces A997-80
• ASTM D5277 : EN-Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
• ASTM D5278 : EN-Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
• ASTM D5279 : EN-Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
• ASTM D528 : EN-Standard Test Method for Machine Direction of Paper and Paperboard
• ASTM D5280 : EN-Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
• ASTM D5281 : EN-Standard Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Workplace or Indoor Atmospheres
• ASTM D5282 : EN-Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
• ASTM D5283 : EN-Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
• ASTM D5284 : EN-Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
• ASTM D5285 : EN-Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments
• ASTM D5286 : EN-Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
• ASTM D5287 : EN-Standard Practice for Automatic Sampling of Gaseous Fuels
• ASTM D5288 : EN-Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
• ASTM D5289 : EN-Standard Test Method for Rubber Property – Vulcanization Using Rotorless Cure Meters
• ASTM D5289 REV A : EN-Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
• ASTM D529 : EN-Standard Test Method for Enclosed Carbon-Arc Exposures of Bituminous Materials
• ASTM D5290 : EN-Standard Test Method for Measurement of Oil Consumption Piston Deposits and Wear in a Heavy-Duty High-Speed Diesel Engine – NTC-400 Procedure
• ASTM의 D5291 : EN-Standard Test Methods for Instrumental Determination of Carbon Hydrogen and Nitrogen in Petroleum Products and Lubricants

ASTM A , ASTM B , ASTM C , ASTM D | 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 | , ASTM E , ASTM F , ASTM G