US DOT / NHTSA
1. DOT 등록 관련 (U.S. DOT / NHTSA )
자동차 부품 등이 미국 지역내에서 사용되어지기 위해서는 관계 법규에 따라 해당기관에 등록토록 하고 있습니다.(Department of Transportation)
등록신청 주체는 vehicle manufacturer(완성차 제작사), original equipment manufacturer(부품제조사)가 되며, 일반적으로 미국 정부기관에서 제공하는 서비스이기에 신청 및 등록에 대한 비용은 없거나 Application 제출 시에 소요되는 소액입니다. 또한 관련 법규에 따라 조치 되어야 하기에 품목별로 적용되는 법, 규정의 내용에 따라 등록절차, 적용규격 등이 다를 수 있습니다. 그 예로서 PHMSA, IMO 등과 더불어 위험물에 관련된 된 경우, FMCSA, 그리고 압력과 관련된 경우, ASME Code 등에 따른 적합성의 입증을 요구할 수 도 있습니다. 이러한 것은 법, 규정에 명확히 기술되어 있으니 아래 사이트에서 관계 법규를 열람하시기 바랍니다.
2. 관련 문서는 아래 미국 정부사이트에서 제공하고 있습니다.
http://www.gpo.gov/ [US Government Printing Office ]
품목별 관련 문서 조회 [ 이 사이트는 미국정부 문서 공개사이트입니다. 해당되는 분야를 조회하세요.]
3. 품목별 관련 규정은 다음과 같습니다.
CHAPTER V—NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
|
500 |
[Reserved] | |
|
501 |
501.1 to 501.8 |
ORGANIZATION AND DELEGATION OF POWERS AND DUTIES |
|
509 |
509.1 to 509.2 |
OMB CONTROL NUMBERS FOR INFORMATION COLLECTION REQUIREMENTS |
|
510 |
510.1 to 510.12 |
INFORMATION GATHERING POWERS |
|
511 |
511.1 to 511.78 |
ADJUDICATIVE PROCEDURES |
|
512 |
512.1 to 512.23 |
CONFIDENTIAL BUSINESS INFORMATION |
|
520 |
520.1 to 520.34 |
PROCEDURES FOR CONSIDERING ENVIRONMENTAL IMPACTS |
|
523 |
523.1 to 523.9 |
VEHICLE CLASSIFICATION |
|
525 |
525.1 to 525.12 |
EXEMPTIONS FROM AVERAGE FUEL ECONOMY STANDARDS |
|
526 |
526.1 to 526.5 |
PETITIONS AND PLANS FOR RELIEF UNDER THE AUTOMOBILE FUEL EFFICIENCY ACT OF 1980 |
|
529 |
529.1 to 529.6 |
MANUFACTURERS OF MULTISTAGE AUTOMOBILES |
|
531 |
531.1 to 531.6 |
PASSENGER AUTOMOBILE AVERAGE FUEL ECONOMY STANDARDS |
|
533 |
533.1 to 533.6 |
LIGHT TRUCK FUEL ECONOMY STANDARDS |
|
534 |
534.1 to 534.7 |
RIGHTS AND RESPONSIBILITIES OF MANUFACTURERS IN THE CONTEXT OF CHANGES IN CORPORATE RELATIONSHIPS |
|
535 |
535.1 to 535.8 |
MEDIUM- AND HEAVY-DUTY VEHICLE FUEL EFFICIENCY PROGRAM |
|
536 |
536.1 to 536.10 |
TRANSFER AND TRADING OF FUEL ECONOMY CREDITS |
|
537 |
537.1 to 537.12 |
AUTOMOTIVE FUEL ECONOMY REPORTS |
|
538 |
538.1 to 538.9 |
MANUFACTURING INCENTIVES FOR ALTERNATIVE FUEL VEHICLES |
|
541 |
541.1 to 541.6 |
FEDERAL MOTOR VEHICLE THEFT PREVENTION STANDARD |
|
542 |
542.1 to 542.2 |
PROCEDURES FOR SELECTING LIGHT DUTY TRUCK LINES TO BE COVERED BY THE THEFT PREVENTION STANDARD |
|
543 |
543.1 to 543.9 |
EXEMPTION FROM VEHICLE THEFT PREVENTION STANDARD |
|
545 |
545.1 to 545.9 |
FEDERAL MOTOR VEHICLE THEFT PREVENTION STANDARD PHASE-IN AND SMALL-VOLUME LINE REPORTING REQUIREMENTS |
|
551 |
551.1 to 551.68 |
PROCEDURAL RULES |
|
552 |
552.1 to 552.15 |
PETITIONS FOR RULEMAKING, DEFECT, AND NONCOMPLIANCE ORDERS |
|
553 |
553.1 to 553.39 |
RULEMAKING PROCEDURES |
|
554 |
554.1 to 554.11 |
STANDARDS ENFORCEMENT AND DEFECTS INVESTIGATION |
|
555 |
555.1 to 555.18 |
TEMPORARY EXEMPTION FROM MOTOR VEHICLE SAFETY AND BUMPER STANDARDS |
|
556 |
556.1 to 556.9 |
EXEMPTION FOR INCONSEQUENTIAL DEFECT OR NONCOMPLIANCE |
|
557 |
557.1 to 557.8 |
PETITIONS FOR HEARINGS ON NOTIFICATION AND REMEDY OF DEFECTS |
|
563 |
563.1 to 563.12 |
EVENT DATA RECORDERS |
|
564 |
564.1 to 564.5 |
REPLACEABLE LIGHT SOURCE AND SEALED BEAM HEADLAMP INFORMATION |
|
565 |
565.1 to 565.26 |
VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS |
|
566 |
566.1 to 566.6 |
MANUFACTURER IDENTIFICATION |
|
567 |
567.1 to 567.7 |
CERTIFICATION |
|
568 |
568.1 to 568.7 |
VEHICLES MANUFACTURED IN TWO OR MORE STAGES—ALL INCOMPLETE, INTERMEDIATE AND FINAL-STAGE MANUFACTURERS OF VEHICLES MANUFACTURED IN TWO OR MORE STAGES |
|
569 |
569.1 to 569.9 |
REGROOVED TIRES |
|
570 |
570.1 to 570.63 |
VEHICLE IN USE INSPECTION STANDARDS |
|
571 |
571.1 to 571.500 |
FEDERAL MOTOR VEHICLE SAFETY STANDARDS |
끝.
Comments are closed.