Test for Automotive-[Mercedes]

Mercedes 시험 규격목록

1. Mercedes : AK LV 110 : PUR foam of the steering wheel sheathing : 2003 : DE
2. Mercedes : DBL 5306 : General technical delivery Requirements and test methods for Materials for interior fittings and similar articles : 2002 : CZ
3. Mercedes : DBL 5306 : General technical delivery conditions and test methods for interior equipment Materials and similar products : 2008 : IN
4. Mercedes : DBL 5307 : Flame retardant properties, Interior trim parts : 2008 : IN
5. Mercedes : DBL 5307 : Reduced flammability, Mils interior fittings (interior) of the vehicle Requirements and test code : 2000 : CZ
6. Mercedes : DBL 5307 : 불꽃, interior parts receivables and Testing : 2000 : DE
7. Mercedes : DBL 5307 : 불꽃, interior parts Requirements and test : 2005 : DE
8. Mercedes : DBL 5381 : spray and powder skins : 2003 : DE
9. Mercedes : DBL 5400 : Components Made from Glass Fiber Reinforced thermosets : 1997 : IN
10. Mercedes : DBL 5404 : Components of thermoPlastics with direct and indirect contact with passengers vehicle interior, the engine cooling Air intake into the engine; heating and ventilation of the passenger compartment; tiles and covers : 2001 : CZ
11. Mercedes : DBL 5404 : Parts of thermoPlastic Materials for the direct and indirect area of ​​the passenger compartment, for the passenger compartment heater, passenger compartment ventilation, panels and housing : 2008 : DE
12. Mercedes : DBL 5404 : Parts manufactured from thermoPlastic Plastics for areas Directly or Indirectly in contact with the passenger compartment, for engine cooling, Air intake; passenger compartment heating and ventilation; paneling and Housings : 2001 : IN
13. Mercedes : DBL 5410 : Parts of thermostatic synthetic material for operating controls, bearing and fastening elements, and spacers : 1999 : IN
14. Mercedes : DBL 5416 : Parts manufactured from thermoPlastic Plastics for externally Applied paneling, housings and functional parts : 2002 : IN
15. Mercedes : DBL 5471 : FAiring and Formpolster Parts Vehicle interiors (composite parts) : 2007 : DE
16. Mercedes : DBL 5471 : Prescription for supply, parts and trim and Upholstery parts per vehicle interior (combined parts) : 2000 : CZ
17. Mercedes : DBL 5481 : Extruded Plastic panels capable of deep drawing : 2001 : IN
18. Mercedes : DBL 5485 : Direct-laminated linings for vehicle interiors (Back Compression /In-mold decoration) : 2000 : IN
19. Mercedes : DBL 5527 : Elastomer parts with reduced electrical conductivity (contact corrosion prevention) : 2002 : DE
20. Mercedes : DBL 5527 : Option : 0 : IN, CZ
21. Mercedes : DBL 5555 : prefabricated parts and semi-finished products made of organic polymer Materials General conditions and test methods : 2001 : DE
22. Mercedes : DBL 5555 : Finished parts and semi-finished products made of organic polymer material General conditions and test methods : 2004 : IN
23. Mercedes : DBL 5556 : Moulded Elastomer parts subject to normal mechanical Requirements : 2001 : IN
24. Mercedes : DBL 5558 : Elastomer parts for mechanical-dynamic high and very high stress, thermally up to 100 ° C Claimable : 2004 : DE
25. Mercedes : DBL 5565 : Elastomer parts thermally 120 ° C to 150 ° C Claimable, resistant to grease and fuels : 1995 : DE
26. Mercedes : DBL 5568 : Claimable Elastomer parts thermally 120 ° C to 150 ° C, moderately resistant to mineral oil products : 1995 : DE
27. Mercedes : DBL 5571 : gasket / Shaped Súčiastky of Elastomers, in particular in body thermally namáhateľné from 70 ° C to 100 ° C, : 2002 : CZ
28. Mercedes : DBL 5571 : Sealing profiles / Moldings made of Elastomers, predominantly in the body area thermally 70 ° C Claimable to 100 ° C : 2002 : DE
29. Mercedes : DBL 5571 : Sealing profiles / Moldings made of Elastomers, predominantly in the body area thermally 70 ° C continuous to 100 ° C short term Claimable : 2008 : DE
30. Mercedes : DBL 5572 : Check and multi-layer floor coverings : 1997 : DE
31. Mercedes : DBL 5573 : Moldings and profiles made of foam Rubber (foamed Elastomers with open- and closed-cell structure) : 2002 : DE
32. Mercedes : DBL 5575 : Textilbeflockte Elastomer parts for body seals and Plastic parts inside the car : 1996 : DE
33. Mercedes : DBL 5578 : Gleitlackbeschichtete Elastomer parts : 2001 : DE
34. Mercedes : DBL 5620 : Organic glasses for lighting arrangements : 1977 : IN
35. Mercedes : DBL 5818 : knitted : 2002 : DE
36. Mercedes : DBL 7384 : Selected parts of the delivery regulation Mercedes-Benz DBL 7384 Liefervorschrift – Beschichtung von Kunststoffteilen im Fahrzeuginnenraum June 2004 : 2004 : CZ
37. Mercedes : DBL 7384 : Coating of Plastic parts in the vehicle interior : 2004 : DE
38. Mercedes : DBL 7384 : Coating of Plastics parts in vehicle interiors : 2004 : IN
39. Mercedes : DBL 7391 : 코팅 / Painting for Parts with High Corrosive stress : 2006 : IN
40. Mercedes : DBL 7399 : Enamels, Paints and similar Coating Materials and associated Coatings. General conditions and tests : 1997 : IN
41. Mercedes : DBL 7399 : Varnishes, Paints and Varnishes and related Coatings. General conditions and tests : 1997 : DE
42. Mercedes : DBL 7904 : Bonded joints on components : 2001 : IN
43. Mercedes : DBL 8230 : Delivery prescription Daimler – Benz, labels : 1982 : CZ
44. Mercedes : DBL 8585 : Negative substance list for the material selection : 2002 : DE
45. Mercedes : DBL 8585 : Negative list of substances for Materials selection : 1999 : CZ
46. Mercedes : MS-EA 121 : Hose – Heater/Radiator – Severe Service : 2004 : IN
47. Mercedes : MS-EA 122 : Hose – Heater/Radiator – Electrochemical Resistant : 2003 : IN
48. Mercedes : PB VWL 709 : Analysis of the emission of volatile and condensable substances from vehicle interior Materials by thermal desorption : 2001 : DE
49. Mercedes : SP 121.02 : Specification for suppliers : 2008 : DE