You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » STD-EN ISO XXXX Conti 2

STD-EN ISO XXXX Conti 2

|1| -|2|- |3|

  • EN ISO 179-2:1999/A1:2012 Plastics – Determination of Charpy impact properties – Part 2: Instrumented impact test – Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)

  • EN ISO 17932:2011 Palm oil – Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011)

  • EN ISO 1797-1:2011 Dentistry – Shanks for rotary instruments – Part 1: Shanks made of metals (ISO 1797-1:2011)

  • EN ISO 1797-2:1995 Dental rotary equipment – Shanks – Part 2: Shanks made of plastics (ISO 1797-2:1992)

  • EN ISO 1797-3:2013 Dentistry – Shanks for rotary instruments – Part 3: Shanks made of ceramics (ISO 1797-3:2013)

  • EN ISO 1798:2008 Flexible cellular polymeric materials – Determination of tensile strength and elongation at break (ISO 1798:2008)

  • EN ISO 17993:2003 Water quality – Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction (ISO 17993:2002)

  • EN ISO 17994:2004 Water quality – Criteria for establishing equivalence between microbiological methods (ISO 17994:2004)

  • EN ISO 180:2000 Plastics – Determination of Izod impact strength (ISO 180:2000)

  • EN ISO 180:2000/A1:2006 Plastics – Determination of Izod impact strength – Amendment 1 (ISO 180:2000/Amd 1:2006)

  • EN ISO 180:2000/A2:2013 Plastics – Determination of Izod impact strength – Amendment 2: Precision data (ISO 180:2000/Amd 2:2013)

  • EN ISO 1805:2006 Fishing nets – Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006)

  • EN ISO 1806:2002 Fishing nets – Determination of mesh breaking force of netting (ISO 1806:2002)

  • EN ISO 18064:2005 Thermoplastic elastomers – Nomenclature and abbreviated terms (ISO 18064:2003)

  • EN ISO 18104:2003 Health Informatics – Integration of a reference terminology model for nursing (ISO 18104:2003)

  • EN ISO 18113-1:2011 In vitro diagnostic medical devices – Information supplied by the manufacturer (labelling) – Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)

  • EN ISO 18113-2:2011 In vitro diagnostic medical devices – Information supplied by the manufacturer (labelling) – Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2009)

  • EN ISO 18113-3:2011 In vitro diagnostic medical devices – Information supplied by the manufacturer (labelling) – Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009)

  • EN ISO 18113-4:2011 In vitro diagnostic medical devices – Information supplied by the manufacturer (labelling) – Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009)

  • EN ISO 18113-5:2011 In vitro diagnostic medical devices – Information supplied by the manufacturer (labelling) – Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009)

  • EN ISO 18153:2003 In vitro diagnostic medical devices – Measurement of quantities in biological samples – Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)

  • EN ISO 182-2:1999 Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 2: pH method (ISO 182-2:1990)

  • EN ISO 182-3:2000 Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 3: Conductometric method (ISO 182-3:1993)

  • EN ISO 18233:2006 Acoustics – Application of new measurement methods in building and room acoustics (ISO 18233:2006)

  • EN ISO 182-4:2000 Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 4: Potentiometric method (ISO 182-4:1993)

  • EN ISO 1825:2011 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification (ISO 1825:2010)

  • EN ISO 18265:2013 Metallic materials – Conversion of hardness values (ISO 18265:2013)

  • EN ISO 18273:2004 Welding consumables – Wire electrodes, wires and rods for welding of aluminium and aluminium alloys – Classification (ISO 18273:2004)

  • EN ISO 18274:2010 Welding consumables – Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys – Classification (ISO 18274:2010)

  • EN ISO 18275:2012 Welding consumables – Covered electrodes for manual metal arc welding of high-strength steels – Classification (ISO 18275:2011)

  • EN ISO 18276:2006 Welding consumables – Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels – Classification (ISO 18276:2005)

  • EN ISO 18278-1:2004 Resistance welding – Weldability – Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2004)

  • EN ISO 18278-2:2004 Resistance welding – Weldability – Part 2: Alternative procedures for the assessment of sheet steels for spot welding (ISO 18278-2:2004)

  • EN ISO 18279:2003 Brazing – Imperfections in brazed joints (ISO 18279:2003)

  • EN ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures (ISO 1828:2012)

  • EN ISO 18286:2010 Hot-rolled stainless steel plates – Tolerances on dimensions and shape (ISO 18286:2008)

  • EN ISO 18330:2003 Milk and milk products – Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues (ISO 18330:2003)

  • EN ISO 1833-1:2010 Textiles – Quantitative chemical analysis – Part 1: General principles of testing (ISO 1833-1:2006, including Cor 1:2009)

  • EN ISO 1833-10:2010 Textiles – Quantitative chemical analysis – Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) (ISO 1833-10:2006)

  • EN ISO 1833-11:2010 Textiles – Quantitative chemical analysis – Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) (ISO 1833-11:2006)

  • EN ISO 1833-12:2010 Textiles – Quantitative chemical analysis – Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) (ISO 1833-12:2006)

  • EN ISO 1833-13:2010 Textiles – Quantitative chemical analysis – Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2006)

  • EN ISO 1833-14:2010 Textiles – Quantitative chemical analysis – Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) (ISO 1833-14:2006)

  • EN ISO 1833-15:2010 Textiles – Quantitative chemical analysis – Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) (ISO 1833-15:2006)

  • EN ISO 1833-16:2010 Textiles – Quantitative chemical analysis – Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) (ISO 1833-16:2006)

  • EN ISO 1833-17:2010 Textiles – Quantitative chemical analysis – Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) (ISO 1833-17:2006)

  • EN ISO 1833-18:2010 Textiles – Quantitative chemical analysis – Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) (ISO 1833-18:2006)

  • EN ISO 1833-19:2010 Textiles – Quantitative chemical analysis – Part 19: Mixtures of cellulose fibres and asbestos (method by heating) (ISO 1833-19:2006)

  • EN ISO 18332:2008 Metallic and other inorganic coatings – Definitions and conventions concerning porosity (ISO 18332:2007)

  • EN ISO 1833-2:2010 Textiles – Quantitative chemical analysis – Part 2: Ternary fibre mixtures (ISO 1833-2:2006)

  • EN ISO 1833-20:2010 Textiles – Quantitative chemical analysis – Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) (ISO 1833-20:2009)

  • EN ISO 1833-21:2010 Textiles – Quantitative chemical analysis – Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) (ISO 1833-21:2006)

  • EN ISO 1833-22:2013 Textiles – Quantitative chemical analysis – Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) (ISO 1833-22:2013)

  • EN ISO 1833-24:2011 Textiles – Quantitative chemical analysis – Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) (ISO 1833-24:2010)

  • EN ISO 1833-25:2013 Textiles – Quantitative chemical analysis – Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform) (ISO 1833-25:2013)

  • EN ISO 1833-26:2013 Textiles – Quantitative chemical analysis – Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid) (ISO 1833-26:2013)

  • EN ISO 1833-3:2010 Textiles – Quantitative chemical analysis – Part 3: Mixtures of acetate and certain other fibres (method using acetone) (ISO 1833-3:2006)

  • EN ISO 1833-4:2010 Textiles – Quantitative chemical analysis – Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) (ISO 1833-4:2006)

  • EN ISO 1833-5:2010 Textiles – Quantitative chemical analysis – Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) (ISO 1833-5:2006)

  • EN ISO 1833-6:2010 Textiles – Quantitative chemical analysis – Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) (ISO 1833-6:2007)

  • EN ISO 1833-7:2010 Textiles – Quantitative chemical analysis – Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) (ISO 1833-7:2006)

  • EN ISO 1833-8:2010 Textiles – Quantitative chemical analysis – Part 8: Mixtures of acetate and triacetate fibres (method using acetone) (ISO 1833-8:2006)

  • EN ISO 1833-9:2010 Textiles – Quantitative chemical analysis – Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) (ISO 1833-9:2006)

  • EN ISO 18369-1:2006 Ophthalmic optics – Contact lenses – Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO 18369-1:2006)

  • EN ISO 18369-1:2006/A1:2009 Ophthalmic optics – Contact lenses – Part 1: Vocabulary, classification system and recommendations for labelling specifications – Amendment 1 (ISO 18369-1:2006/Amd 1:2009)

  • EN ISO 18369-2:2012 Ophthalmic optics – Contact lenses – Part 2: Tolerances (ISO 18369-2:2012)

  • EN ISO 18369-3:2006 Ophthalmic optics – Contact lenses – Part 3: Measurement methods (ISO 18369-3:2006)

  • EN ISO 18369-4:2006 Ophthalmic optics – Contact lenses – Part 4: Physicochemical properties of contact lens materials (ISO 18369-4:2006)

  • EN ISO 18395:2007 Animal and vegetable fats and oils – Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) (ISO 18395:2005)

  • EN ISO 18412:2006 Water quality – Determination of chromium(VI) – Photometric method for weakly contaminated water (ISO 18412:2005)

  • EN ISO 18415:2011 Cosmetics – Microbiology – Detection of specified and non-specified microorganisms (ISO 18415:2007)

  • EN ISO 18416:2009 Cosmetics – Microbiology – Detection of Candida albicans (ISO 18416:2007)

  • EN ISO 18453:2005 Natural gas – Correlation between water content and water dew point (ISO 18453:2004)

  • EN ISO 18472:2006 Sterilization of health care products – Biological and chemical indicators – Test equipment (ISO 18472:2006)

  • EN ISO 18513:2003 Tourism services – Hotels and other types of tourism accommodation – Terminology (ISO 18513:2003)

  • EN ISO 1854:2008 Whey cheese – Determination of fat content – Gravimetric method (Reference method) (ISO 1854:2008)

  • EN ISO 18542-1:2012 Road vehicles – Standardized repair and maintenance information (RMI) terminology – Part 1: General information and use case definition (ISO 18542-1:2012)

  • EN ISO 1856:2000 Flexible cellular polymeric materials – Determination of compression set (ISO 1856:2000)

  • EN ISO 1856:2000/A1:2007 Flexible cellular polymeric materials – Determination of compression set – Amendment 1 (ISO 1856:2000/Amd 1:2007)

  • EN ISO 18592:2009 Resistance welding – Destructive testing of welds – Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)

  • EN ISO 18594:2007 Resistance spot-, projection- and seam-welding – Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)

  • EN ISO 18595:2007 Resistance welding – Spot welding of aluminium and aluminium alloys – Weldability, welding and testing (ISO 18595:2007)

  • EN ISO 186:2002 Paper and board – Sampling to determine average quality (ISO 186:2002)

  • EN ISO 18609:2001 Animal and vegetable fats and oils – Determination of unsaponifiable matter – Method using hexane extraction

  • EN ISO 18613:2003 Repair of flat wooden pallets (ISO 18613:2003)

  • EN ISO 1872-1:1999 Plastics – Polyethylene (PE) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 1872-1:1993)

  • EN ISO 1872-2:2007 Plastics – Polyethylene (PE) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)

  • EN ISO 1873-1:1995 Plastics – Polypropylene (PP) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 1873-1:1995)

  • EN ISO 1873-2:2007 Plastics – Polypropylene (PP) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)

  • EN ISO 1874-1:2010 Plastics – Polyamide (PA) moulding and extrusion materials – Part 1: Designation system and basis for specification (ISO 1874-1:2010)

  • EN ISO 1874-2:2012 Plastics – Polyamide (PA) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)

  • EN ISO 18753:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of absolute density of ceramic powders by pyknometer (ISO 18753:2004)

  • EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003)

  • EN ISO 18757:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003)

  • EN ISO 18777:2009 Transportable liquid oxygen systems for medical use – Particular requirements (ISO 18777:2005)

  • EN ISO 18778:2009 Respiratory equipment – Infant monitors – Particular requirements (ISO 18778:2005)

  • EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures – Particular requirements (ISO 18779:2005)

  • EN ISO 18812:2003 Health informatics – Clinical analyser interfaces to laboratry information systems – Use profiles (ISO 18812:2003)

  • EN ISO 18856:2005 Water quality – Determination of selected phthalates using gas chromatography/mass spectrometry (ISO 18856:2004)

  • EN ISO 18857-1:2006 Water quality – Determination of selected alkylphenols – Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)

  • EN ISO 18857-2:2011 Water quality – Determination of selected alkylphenols – Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation (ISO 18857-2:2009)

  • EN ISO 1889:2009 Reinforcement yarns – Determination of linear density (ISO 1889:2009)

  • EN ISO 1890:2009 Reinforcement yarns – Determination of twist (ISO 1890:2009)

  • EN ISO 1893:2008 Refractory products – Determination of refractoriness under load – Differential method with rising temperature (ISO 1893:2007)

  • EN ISO 1927-7:2012 Monolithic (unshaped) refractory products – Part 7: Tests on pre-formed shapes (ISO 1927-7:2012)

  • EN ISO 1927-8:2012 Monolithic (unshaped) refractory products – Part 8: Determination of complementary properties (ISO 1927-8:2012)

  • EN ISO 1942:2010 Dentistry – Vocabulary (ISO 1942:2009, Corrected version 2010-03-01)

  • EN ISO 19432:2012 Building construction machinery and equipment – Portable, hand-held, internal combustion engine driven cut-off machines – Safety requirements (ISO 19432:2012)

  • EN ISO 19900:2002 Petroleum and natural gas industries – General requirements for offshore structures (ISO 19900:2002)

  • EN ISO 19901-1:2005 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 1: Metocean design and operating considerations (ISO 19901-1:2005)

  • EN ISO 19901-2:2004 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 2: Seismic design procedures and criteria (ISO 19901-2:2004)

  • EN ISO 19901-3:2010 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 3: Topsides structure (ISO 19901-3:2010)

  • EN ISO 19901-4:2003 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 4: Geotechnical and foundation design considerations (ISO 19901-4:2003)

  • EN ISO 19901-5:2003 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 5: Weight control during engineering and construction (ISO 19901-5:2003)

  • EN ISO 19901-6:2009 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 6: Marine operations (ISO 19901-6:2009)

  • EN ISO 19901-6:2009/AC:2011 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 6: Marine operations – Technical Corrigendum 1 (ISO 19901-6:2009/Cor 1:2011)

  • EN ISO 19901-7:2013 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units (ISO 19901-7:2013)

  • EN ISO 19902:2007 Petroleum and natural gas industries – Fixed steel offshore structures (ISO 19902:2007)

  • EN ISO 19902:2007/A1:2013 Petroleum and natural gas industries – Fixed steel offshore structures (ISO 19902:2007/Amd 1:2013)

  • EN ISO 19903:2006 Petroleum and natural gas industries – Fixed concrete offshore structures (ISO 19903:2006)

  • EN ISO 19904-1:2006 Petroleum and natural gas industries – Floating offshore structures – Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006)

  • EN ISO 19905-1:2012 Petroleum and natural gas industries – Site-specific assessment of mobile offshore units – Part 1: Jack-ups (ISO 19905-1:2012)

  • EN ISO 19906:2010 Petroleum and natural gas industries – Arctic offshore structures (ISO 19906:2010)

  • EN ISO 20126:2012 Dentistry – Manual toothbrushes – General requirements and test methods (ISO 20126:2012)

  • EN ISO 20312:2011 Petroleum and natural gas industries – Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011)

  • EN ISO 20349:2010 Personal protective equipment – Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding – Requirements and test method (ISO 20349:2010)

  • EN ISO 20482:2003 Metallic materials – Sheet and strip – Erichsen cupping test (ISO 20482:2003)

  • EN ISO 20483:2006 Cereals and pulses – Determination of the nitrogen content and calculation of the crude protein content – Kjeldahl method (ISO 20483:2006)

  • EN ISO 20623:2003 Petroleum and related products – Determination of the extreme-pressure and anti-wear properties of fluids – Four ball method (European conditions) (ISO 20623:2003)

  • EN ISO 20763:2004 Petroleum and related products – Determination of anti-wear properties of hydraulic fluids – Vane pump method (ISO 20763:2004)

  • EN ISO 20764:2003 Petroleum and related products – Preparation of a test portion of high-boiling liquids for the determination of water content – Nitrogen purge method (ISO 20764:2003)

  • EN ISO 20783-1:2011 Petroleum and related products – Determination of emulsion stability of fire-resistant fluids – Part 1: Fluids in category HFAE (ISO 20783-1:2011)

  • EN ISO 20783-2:2003 Petroleum and related products – Determination of emulsion stability of fire-resistant fluids – Part 2: Fluids in category HFB (ISO 20783-2:2003)

  • EN ISO 20815:2010 Petroleum, petrochemical and natural gas industries – Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15)

  • EN ISO 20823:2003 Petroleum and related products – Determination of the flammability characteristics of fluids in contact with hot surfaces – Manifold ignition test (ISO 20823:2003)

  • EN ISO 20843:2011 Petroleum and related products – Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011)

  • EN ISO 20844:2004 Petroleum and related products – Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2004)

  • EN ISO 20846:2011 Petroleum products – Determination of sulfur content of automotive fuels – Ultraviolet fluorescence method (ISO 20846:2011)

  • EN ISO 20847:2004 Petroleum products – Determination of sulfur content of automotive fuels – Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)

  • EN ISO 20848-1:2008 Packaging – Plastics drums – Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-1:2006)

  • EN ISO 20884:2011 Petroleum products – Determination of sulfur content of automotive fuels – Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)

  • EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings – Part 1: General (ISO 21003-1:2008)

  • EN ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings – Part 2: Pipes (ISO 21003-2:2008)

  • EN ISO 21003-2:2008/A1:2011 Multilayer piping systems for hot and cold water installations inside buildings – Part 2: Pipes – Amendment 1 (ISO 21003-2:2008/Amd 1:2011)

  • EN ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings – Part 3: Fittings (ISO 21003-3:2008)

  • EN ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings – Part 5: Fitness for purpose of the system (ISO 21003-5:2008)

  • EN ISO 21007-1:2005 Gas cylinders – Identification and marking using radio frequency identification technology – Part 1: Reference architecture and terminology (ISO 21007-1:2005)

  • EN ISO 21007-2:2013 Gas cylinders – Identification and marking using radio frequency identification technology – Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2013)

  • EN ISO 21049:2004 Pumps – Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)

  • EN ISO 2106:2011 Anodizing of aluminium and its alloys – Determination of mass per unit area (surface density) of anodic oxidation coatings – Gravimetric method (ISO 2106:2011)

  • EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products – Part 1: General information and sample preparation (ISO 21068-1:2008)

  • EN ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products – Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon (ISO 21068-2:2008)

  • EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products – Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)

  • EN ISO 21078-1:2008 Determination of boron (III) oxide in refractory products – Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008)

  • EN ISO 21078-2:2007 Determination of boron(III) oxide in refractory products – Part 2: Acid extraction method for the determination of boron(III) oxide in binder components (ISO 21078-2:2006)

  • EN ISO 21079-1:2008 Chemical analysis of refractories containing alumina, zirconia and silica – Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) – Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008)

  • EN ISO 21079-2:2008 Chemical analysis of refractories containing alumina, zirconia, and silica – Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) – Part 2: Wet chemical analysis (ISO 21079-2:2008)

  • EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica – Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) – Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES) (ISO 21079-3:2008)

  • EN ISO 21090:2011 Health Informatics – Harmonized data types for information interchange (ISO 21090:2011)

  • EN ISO 21091:2013 Health informatics – Directory services for healthcare providers, subjects of care and other entities (ISO 21091:2013)

  • EN ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) – Determination of partial acid value and total acid value (ISO 2114:2000)

  • EN ISO 2114:2000/AC:2005 Plastics (polyester resins) and paints and varnishes (binders) – Determination of partial acid value and total acid value (ISO 2114:2000)

  • EN ISO 21148:2009 Cosmetics – Microbiology – General instructions for microbiological examination (ISO 21148:2005)

  • EN ISO 21149:2009 Cosmetics – Microbiology – Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2006)

  • EN ISO 21150:2009 Cosmetics – Microbiology – Detection of Escherichia coli (ISO 21150:2006)

  • EN ISO 21171:2006 Medical gloves – Determination of removable surface powder (ISO 21171:2006)

  • EN ISO 21178:2013 Light conveyor belts – Determination of electrical resistances (ISO 21178:2013)

  • EN ISO 21179:2013 Light conveyor belts – Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2013)

  • EN ISO 21180:2013 Light conveyor belts – Determination of the maximum tensile strength (ISO 21180:2013)

  • EN ISO 21181:2013 Light conveyor belts – Determination of the relaxed elastic modulus (ISO 21181:2013)

  • EN ISO 21182:2013 Light conveyor belts – Determination of the coefficient of friction (ISO 21182:2013)

  • EN ISO 21183-1:2006 Light conveyor belts – Part 1: Principal characteristics and applications (ISO 21183-1:2005)

  • EN ISO 21183-2:2006 Light conveyor belts – Part 2: List of equivalent terms (ISO 21183-2:2005)

  • EN ISO 21187:2005 Milk – Quantitative determination of bacteriological quality – Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results (ISO 21187:2004)

  • EN ISO 21227-1:2003 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 1: General guidance (ISO 21227-1:2003)

  • EN ISO 21227-2:2006 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006)

  • EN ISO 21227-3:2007 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)

  • EN ISO 21227-4:2008 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008)

  • EN ISO 21254-1:2011 Lasers and laser-related equipment – Test methods for laser-induced damage threshold – Part 1: Definitions and general principles (ISO 21254-1:2011)

  • EN ISO 21254-2:2011 Lasers and laser-related equipment – Test methods for laser-induced damage threshold – Part 2: Threshold determination (ISO 21254-2:2011)

  • EN ISO 21254-3:2011 Lasers and laser-related equipment – Test methods for laser-induced damage threshold – Part 3: Assurance of laser power (energy) handling capabilities (ISO 21254-3:2011)

  • EN ISO 21258:2010 Stationary source emissions – Determination of the mass concentration of dinitrogen monoxide (N2O) – Reference method: Non-dispersive infrared method (ISO 21258:2010)

  • EN ISO 2128:2010 Anodizing of aluminium and its alloys – Determination of thickness of anodic oxidation coatings – Non-destructive measurement by split-beam microscope (ISO 2128:2010)

  • EN ISO 21281:2005 Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks – Rules for the construction and layout of pedals (ISO 21281:2005)

  • EN ISO 21329:2004 Petroleum and natural gas industries – Pipeline transportation systems – Test procedures for mechanical connectors (ISO 21329:2004)

  • EN ISO 21351:2005 Space systems – Functional and technical specifications (ISO/FDIS 21351:2004)

  • EN ISO 21415-1:2007 Wheat and wheat flour – Gluten content – Part 1: Determination of wet gluten by a manual method (ISO 21415-1:2006)

  • EN ISO 21415-2:2008 Wheat and wheat flour – Gluten content – Part 2: Determination of wet gluten by mechanical means (ISO 21415-2:2006)

  • EN ISO 21415-3:2007 Wheat and wheat flour – Gluten content – Part 3: Determination of dry gluten from wet gluten by an oven drying method (ISO 21415-3:2006)

  • EN ISO 21415-4:2007 Wheat and wheat flour – Gluten content – Part 4: Determination of dry gluten from wet gluten by a rapid drying method (ISO 21415-4:2006)

  • EN ISO 21427-2:2009 Water quality – Evaluation of genotoxicity by measurement of the induction of micronuclei – Part 2: Mixed population method using the cell line V79 (ISO 21427-2:2006)

  • EN ISO 21427-2:2009/AC:2009 Water quality – Evaluation of genotoxicity by measurement of the induction of micronuclei – Part 2: Mixed population method using the cell line V79 (ISO 21427-2:2006/Cor 1:2009)

  • EN ISO 2143:2010 Anodizing of aluminium and its alloys – Estimation of loss of absorptive power of anodic oxidation coatings after sealing – Dye-spot test with prior acid treatment (ISO 2143:2010)

  • EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries – Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)

  • EN ISO 21469:2006 Safety of machinery – Lubricants with incidental product contact – Hygiene requirements (ISO 21469:2006)

  • EN ISO 21487:2012 Small craft – Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)

  • EN ISO 2151:2008 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2) (ISO 2151:2004)

  • EN ISO 21530:2004 Dentistry – Materials used for dental equipment surfaces – Determination of resistance to chemical disinfectants (ISO 21530:2004)

  • EN ISO 21531:2009 Dentistry – Graphical symbols for dental instruments (ISO 21531:2009)

  • EN ISO 21533:2003 Dentistry – Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003)

  • EN ISO 21533:2003/AC:2009 Dentistry – Reusable cartridge syringes intended for intraligamentary injections – Technical Corrigendum 1 (ISO 21533:2003/Cor 1:2009)

  • EN ISO 21534:2009 Non-active surgical implants – Joint replacement implants – Particular requirements (ISO 21534:2007)

  • EN ISO 21535:2009 Non-active surgical implants – Joint replacement implants – Specific requirements for hip-joint replacement implants (ISO 21535:2007)

  • EN ISO 21536:2009 Non-active surgical implants – Joint replacement implants – Specific requirements for knee-joint replacement implants (ISO 21536:2007)

  • EN ISO 21549-1:2013 Health informatics – Patient healthcard data – Part 1: General structure (ISO 21549-1:2013)

  • EN ISO 21549-2:2004 Health informatics – Patient healthcard data – Part 2: Common objects (ISO 21549-2:2004)

  • EN ISO 21549-3:2004 Health informatics – Patient healthcard data – Part 3: Limited clinical data (ISO 21549-3:2004)

  • EN ISO 21549-4:2006 Health informatics – Patient healthcard data – Part 4: Extended clinical data (ISO 21549-4:2006)

  • EN ISO 21549-5:2008 Health informatics – Patient healthcard data – Part 5: Identification data (ISO 21549-5:2008)

  • EN ISO 21549-6:2008 Health informatics – Patient healthcard data – Part 6: Administrative data (ISO 21549-6:2008)

  • EN ISO 21549-7:2007 Health informatics – Patient healthcard data – Part 7: Medication data (ISO 21549-7:2007)

  • EN ISO 21549-8:2010 Health informatics – Patient healthcard data – Part 8: Links (ISO 21549-8:2010)

  • EN ISO 21563:2013 Dentistry – Hydrocolloid impression materials (ISO 21563:2013)

  • EN ISO 21567:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Shigella spp. (ISO 21567:2004)

  • EN ISO 21569:2005 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Qualitative nucleic acid based methods (ISO 21569:2005)

  • EN ISO 21569:2005/A1:2013 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Qualitative nucleic acid based methods – Amendment 1 (ISO 21569:2005/Amd 1:2013)

  • EN ISO 2157:1995 Dental rotary instruments – Nominal diameters and designation code number (ISO 2157:1992)

  • EN ISO 21570:2005 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Quantitative nucleic acid based methods (ISO 21570:2005)

  • EN ISO 21570:2005/A1:2013 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Quantitative nucleic acid based methods (ISO 21570:2005/Amd 1:2013)

  • EN ISO 21570:2005/AC:2007 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Quantitative nucleic acid based methods (ISO 21570:2005/Cor.1:2006)

  • EN ISO 21571:2005 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Nucleic acid extraction (ISO 21571:2005)

  • EN ISO 21571:2005/A1:2013 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Nucleic acid extraction – Amendment 1 (ISO 21571:2005/Amd 1:2013)

  • EN ISO 21572:2013 Foodstuffs – Molecular biomarker analysis – Protein-based methods (ISO 21572:2013)

  • EN ISO 21587-1:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) – Part 1: Apparatus, reagents, dissolution and gravimetric silica (ISO 21587-1:2007)

  • EN ISO 21587-2:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) – Part 2: Wet chemical analysis (ISO 21587-2:2007)

  • EN ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) – Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007)

  • EN ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction (ISO 216:2007)

  • EN ISO 2160:1998 Petroleum products – Corrosiveness to copper – Copper strip test (ISO 2160:1998)

  • EN ISO 21606:2007 Dentistry – Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007)

  • EN ISO 2162-1:1996 Technical product documentation – Springs – Part 1: Simplified representation (ISO 2162-1:1993)

  • EN ISO 2162-2:1996 Technical product documentation – Springs – Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993)

  • EN ISO 21627-1:2009 Plastics – Epoxy resins – Determination of chlorine content – Part 1: Inorganic chlorine (ISO 21627-1:2009)

  • EN ISO 21627-2:2009 Plastics – Epoxy resins – Determination of chlorine content – Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)

  • EN ISO 21627-3:2009 Plastics – Epoxy resins – Determination of chlorine content – Part 3: Total chlorine (ISO 21627-3:2009)

  • EN ISO 21649:2009 Needle-free injectors for medical use – Requirements and test methods (ISO 21649:2006)

  • EN ISO 21670:2003 Hexagon weld nuts with flange (ISO 21670:2003)

  • EN ISO 21671:2006 Dentistry – Rotary polishers (ISO 21671:2006)

  • EN ISO 21671:2006/A1:2011 Dentistry – Rotary polishers – Amendment 1 (ISO 21671:2006/Amd 1:2011)

  • EN ISO 21672-1:2012 Dentistry – Periodontal probes – Part 1: General requirements (ISO 21672-1:2012)

  • EN ISO 21672-2:2012 Dentistry – Periodontal probes – Part 2: Designation (ISO 21672-2:2012)

  • EN ISO 217:2013 Paper – Untrimmed sizes – Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013)

  • EN ISO 2171:2010 Cereals, pulses and by-products – Determination of ash yield by incineration (ISO 2171:2007)

  • EN ISO 2177:2004 Metallic coatings – Measurement of coating thickness – Coulometric method by anodic dissolution (ISO 2177:2003)

  • EN ISO 2178:1995 Non-magnetic coatings on magnetic substrates – Measurement of coating thickness – Magnetic method (ISO 2178:1982)

  • EN ISO 21787:2006 Industrial valves – Globe valves of thermoplastics materials (ISO 21787:2006)

  • EN ISO 21809-1:2011 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)

  • EN ISO 21809-2:2007 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 2: Fusion-bonded epoxy coatings (ISO 21809-2:2007)

  • EN ISO 21809-2:2007/AC:2009 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 2: Fusion-bonded epoxy coatings (ISO 21809-2:2007/Cor 1:2008)

  • EN ISO 21809-5:2010 Petroleum and natural gas industries – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 5: External concrete coatings (ISO 21809-5:2010)

  • EN ISO 21871:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the determination of low numbers of presumptive Bacillus cereus – Most probable number technique and detection method (ISO 21871:2006)

  • EN ISO 21898:2005 Packaging – Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004)

  • EN ISO 21952:2012 Welding consumables – Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels – Classification (ISO 21952:2012)

  • EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials – Measurement of coating thickness – Phase-sensitive eddy-current method (ISO 21968:2005)

  • EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)

  • EN ISO 21987:2009 Ophthalmic optics – Mounted spectacle lenses (ISO 21987:2009)

  • EN ISO 22000:2005 Food safety management systems – Requirements for any organization in the food chain (ISO 22000:2005)

  • EN ISO 22000:2005/AC:2006 Food safety management systems – Requirements for any organization in the food chain (ISO 22000:2005/Cor.1:2006)

  • EN ISO 22005:2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation (ISO 22005:2007)

  • EN ISO 22007-1:2012 Plastics – Determination of thermal conductivity and thermal diffusivity – Part 1: General principles (ISO 22007-1:2009)

  • EN ISO 22007-2:2012 Plastics – Determination of thermal conductivity and thermal diffusivity – Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008)

  • EN ISO 22007-3:2012 Plastics – Determination of thermal conductivity and thermal diffusivity – Part 3: Temperature wave analysis method (ISO 22007-3:2008)

  • EN ISO 22007-4:2012 Plastics – Determination of thermal conductivity and thermal diffusivity – Part 4: Laser flash method (ISO 22007-4:2008)

  • EN ISO 2203:1997 Technical drawings – Conventional representation of gears (ISO 2203:1973)

  • EN ISO 22030:2011 Soil quality – Biological methods – Chronic toxicity in higher plants (ISO 22030:2005)

  • EN ISO 22032:2009 Water quality – Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge – Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006)

  • EN ISO 22088-1:2006 Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 1: General guidance (ISO 22088-1:2006)

  • EN ISO 22088-2:2006 Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 2: Constant tensile load method (ISO 22088-2:2006)

  • EN ISO 22088-3:2006 Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 3: Bent strip method (ISO 22088-3:2006)

  • EN ISO 22088-4:2006 Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 4: Ball or pin impression method (ISO 22088-4:2006)

  • EN ISO 22088-5:2009 Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 5: Constant tensile deformation method (ISO 22088-5:2006)

  • EN ISO 22088-6:2009 Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 6: Slow strain rate method (ISO 22088-6:2006)

  • EN ISO 22112:2006 Dentistry – Artificial teeth for dental prostheses (ISO 22112:2005)

  • EN ISO 22118:2011 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens – Performance characteristics (ISO 22118:2011)

  • EN ISO 22119:2011 Microbiology of food and animal feeding stuffs – Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions (ISO 22119:2011)

  • EN ISO 22155:2013 Soil quality – Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers – Static headspace method (ISO 22155:2011)

  • EN ISO 22160:2007 Milk and milk-based drinks – Determination of alkaline phosphatase activity – Enzymatic photo-activated system (EPAS) method (ISO 22160:2007)

  • EN ISO 22174:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions (ISO 22174:2005)

  • EN ISO 22254:2005 Dentistry – Manual toothbrushes – Resistance of tufted portion to deflection (ISO 22254:2005)

  • EN ISO 22282-1:2012 Geotechnical investigation and testing – Geohydraulic testing – Part 1: General rules (ISO 22282-1:2012)

  • EN ISO 22282-2:2012 Geotechnical investigation and testing – Geohydraulic testing – Part 2: Water permeability tests in a borehole using open systems (ISO 22282-2:2012)

  • EN ISO 22282-3:2012 Geotechnical investigation and testing – Geohydraulic testing – Part 3: Water pressure tests in rock (ISO 22282-3:2012)

  • EN ISO 22282-4:2012 Geotechnical investigation and testing – Geohydraulic testing – Part 4: Pumping tests (ISO 22282-4:2012)

  • EN ISO 22282-5:2012 Geotechnical investigation and testing – Geohydraulic testing – Part 5: Infiltrometer tests (ISO 22282-5:2012)

  • EN ISO 22282-6:2012 Geotechnical investigation and testing – Geohydraulic testing – Part 6: Water permeability tests in a borehole using closed systems (ISO 22282-6:2012)

  • EN ISO 22288:2009 Leather – Physical and mechanical tests – Determination of flex resistance by the vamp flex method (ISO 22288:2006)

  • EN ISO 2231:1995 Rubber- or plastics-coated fabrics – Standard atmospheres for conditioning and testing (ISO 2231:1989)

  • EN ISO 2233:2001 Packaging – Complete, filled transport packages and unit loads – Conditioning for testing (ISO 2233:2000)

  • EN ISO 2234:2002 Packaging – Complete, filled transport packages and unit loads – Stacking tests using a static load (ISO 2234:2000)

  • EN ISO 22374:2005 Dentistry – Dental handpieces – Electrical-powered scalers and scaler tips (ISO 22374:2005)

  • EN ISO 22391-1:2009 Plastics piping systems for hot and cold water installations – Polyethylene of raised temperature resistance (PE-RT) – Part 1: General (ISO 22391-1:2009)

  • EN ISO 22391-2:2009 Plastics piping systems for hot and cold water installations – Polyethylene of raised temperature resistance (PE-RT) – Part 2: Pipes (ISO 22391-2:2009)

  • EN ISO 22391-3:2009 Plastics piping systems for hot and cold water installations – Polyethylene of raised temperature resistance (PE-RT) – Part 3: Fittings (ISO 22391-3:2009)

  • EN ISO 22391-5:2009 Plastics piping systems for hot and cold water installations – Polyethylene of raised temperature resistance (PE-RT) – Part 5: Fitness for purpose of the system (ISO 22391-5:2009)

  • EN ISO 22413:2013 Transfer sets for pharmaceutical preparations – Requirements and test methods (ISO 22413:2010)

  • EN ISO 22432:2011 Geometrical product specifications (GPS) – Features utilized in specification and verification (ISO 22432:2011)

  • EN ISO 22434:2011 Transportable gas cylinders – Inspection and maintenance of cylinder valves (ISO 22434:2006)

  • EN ISO 22435:2007 Gas cylinders – Cylinder valves with integrated pressure regulators – Specification and type testing (ISO 22435:2007)

  • EN ISO 22435:2007/A1:2012 Gas cylinders – Cylinder valves with integrated pressure regulators – Specification and type testing (ISO 22435:2007/Amd 1:2012)

  • EN ISO 2244:2002 Packaging – Complete, filled transport packages and unit loads – Horizontal impact tests (ISO 2244:2000)

  • EN ISO 22442-1:2007 Medical devices utilizing animal tissues and their derivatives – Part 1: Application of risk management (ISO 22442-1:2007)

  • EN ISO 22442-2:2007 Medical devices utilizing animal tissues and their derivatives – Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2007)

  • EN ISO 22442-3:2007 Medical devices utilizing animal tissues and their derivatives – Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents (ISO 22442-3:2007)

  • EN ISO 2247:2002 Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequency (ISO 2247:2000)

  • EN ISO 22475-1:2006 Geotechnical investigation and testing – Sampling methods and groundwater measurements – Part 1: Technical principles for execution (ISO 22475-1:2006)

  • EN ISO 22476-1:2012 Geotechnical investigation and testing – Field testing – Part 1: Electrical cone and piezocone penetration test (ISO 22476-1:2012)

  • EN ISO 22476-1:2012/AC:2013 Geotechnical investigation and testing – Field testing – Part 1: Electrical cone and piezocone penetration test – Technical Corrigendum 1 (ISO 22476-1:2012/Cor 1:2013)

  • EN ISO 22476-12:2009 Geotechnical investigation and testing – Field testing – Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009)

  • EN ISO 22476-2:2005 Geotechnical investigation and testing – Field testing – Part 2: Dynamic probing (ISO 22476-2:2005)

  • EN ISO 22476-2:2005/A1:2011 Geotechnical investigation and testing – Field testing – Part 2: Dynamic probing – Amendment 1 (ISO 22476-2:2005/Amd 1:2011)

  • EN ISO 22476-3:2005 Geotechnical investigation and testing – Field testing – Part 3: Standard penetration test (ISO 22476-3:2005)

  • EN ISO 22476-3:2005/A1:2011 Geotechnical investigation and testing – Field testing – Part 3: Standard penetration test – Amendment 1 (ISO 22476-3:2005/Amd 1:2011)

  • EN ISO 22476-4:2012 Geotechnical investigation and testing – Field testing – Part 4: Ménard pressuremeter test (ISO 22476-4:2012)

  • EN ISO 22476-5:2012 Geotechnical investigation and testing – Field testing – Part 5: Flexible dilatometer test (ISO 22476-5:2012)

  • EN ISO 22476-7:2012 Geotechnical investigation and testing – Field testing – Part 7: Borehole jack test (ISO 22476-7:2012)

  • EN ISO 22478:2006 Water quality – Determination of certain explosives and related compounds – Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)

  • EN ISO 225:2010 Fasteners – Bolts, screws, studs and nuts – Symbols and descriptions of dimensions (ISO 225:2010)

  • EN ISO 22523:2006 External limb prostheses and external orthoses – Requirements and test methods (ISO 22523:2006)

  • EN ISO 22610:2006 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment – Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006)

  • EN ISO 22612:2005 Clothing for protection against infectious agents – Test method for resistance to dry microbial penetration (ISO 22612:2005)

  • EN ISO 22665:2012 Ophthalmic optics and instruments – Instruments to measure axial distances in the eye (ISO 22665:2012)

  • EN ISO 22674:2006 Dentistry – Metallic materials for fixed and removable restorations and appliances (ISO 22674:2006)

  • EN ISO 22675:2006 Prosthetics – Testing of ankle-foot devices and foot units – Requirements and test methods (ISO 22675:2006)

  • EN ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices (ISO 22716:2007)

  • EN ISO 22717:2009 Cosmetics – Microbiology – Detection of Pseudomonas aeruginosa (ISO 22717:2006)

  • EN ISO 22718:2009 Cosmetics – Microbiology – Detection of Staphylococcus aureus (ISO 22718:2006)

  • EN ISO 22721:2007 Conveyor belts – Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007)

  • EN ISO 22774:2004 Footwear – Test methods for accessories: shoe laces – Abrasion resistance (ISO 22774:2004)

  • EN ISO 22775:2004 Footwear – Test methods for accessories: Metallic accessories – Corrosion resistance (ISO 22775:2004)

  • EN ISO 22776:2004 Footwear – Test methods for accessories: Touch and close fasteners – Shear strength before and after repeated closing (ISO 22776:2004)

  • EN ISO 22777:2004 Footwear – Test methods for accessories: touch and close fasteners – Peel strength before and after repeated closing (ISO 22777:2004)

  • EN ISO 22794:2009 Dentistry – Implantable materials for bone filling and augmentation in oral and maxillofacial surgery – Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15)

  • EN ISO 22803:2005 Dentistry – Membrane materials for guided tissue regeneration in oral and maxillofacial surgery – Contents of a technical file (ISO 22803:2004)

  • EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads – Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)

  • EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads – Part 2: Verification by means of limit gauges (ISO 228-2:1987)

  • EN ISO 22825:2012 Non-destructive testing of welds – Ultrasonic testing – Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2012)

  • EN ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines – Machines with optical fibre delivery – Part 1: Laser assembly (ISO 22827-1:2005)

  • EN ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines – Machines with optical fibre delivery – Part 2: Moving mechanism (ISO 22827-2:2005)

  • EN ISO 22829:2008 Resistance welding – Transformer-rectifier for welding guns with integrated transformers – Transformer-rectifier units operating at 1000 Hz frequency (ISO 22829:2007)

  • EN ISO 22854:2008 Liquid petroleum products – Determination of hydrocarbon types and oxygenates in automotive-motor gasoline – Multidimensional gas chromatography method (ISO 22854:2008)

  • EN ISO 2286-1:1998 Rubber- or plastics-coated fabrics – Determination of roll characteristics – Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998)

  • EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics – Determination of roll characteristics – Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)

  • EN ISO 2286-3:1998 Rubber- or plastics-coated fabrics – Determination of roll characteristics – Part 3: Method for determination of thickness (ISO 2286-3:1998)

  • EN ISO 22867:2011 Forestry and gardening machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles (ISO 22867:2011)

  • EN ISO 22868:2011 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2011)

  • EN ISO 22870:2006 Point-of-care testing (POCT) – Requirements for quality and competence (ISO 22870:2006)

  • EN ISO 22892:2011 Soil quality – Guidelines for the identification of target compounds by gas chromatography and mass spectrometry (ISO 22892:2006)

  • EN ISO 22959:2009 Animal and vegetable fats and oils – Determination of polycyclic aromatic hydrocarbons by on-line donor-acceptor complex chromatography and HPLC with fluorescence detection (ISO 22959:2009)

  • EN ISO 2307:2010 Fibre ropes – Determination of certain physical and mechanical properties (ISO 2307:2010)

  • EN ISO 23125:2010 Machine tools – Safety – Turning machines (ISO 23125:2010)

  • EN ISO 23125:2010/A1:2012 Machine tools – Safety – Turning machines – Amendment 1 (ISO 23125:2010/Amd 1:2012)

  • EN ISO 23161:2011 Soil quality – Determination of selected organotin compounds – Gas-chromatographic method (ISO 23161:2009)

  • EN ISO 2320:2008 Prevailing torque type steel nuts – Mechanical and performance properties (ISO 2320:2008)

  • EN ISO 23210:2009 Stationary source emissions – Determination of PM10/PM2,5 mass concentration in flue gas – Measurement at low concentrations by use of impactors (ISO 23210:2009)

  • EN ISO 23251:2007 Petroleum, petrochemical and natural gas industries – Pressure-relieving and depressuring systems (ISO 23251:2006)

  • EN ISO 23251:2007/A1:2008 Petroleum, petrochemical and natural gas industries – Pressure-relieving and depressuring systems – Amendment 1 (ISO 23251:2007/Amd 1:2008)

  • EN ISO 23251:2007/AC:2008 Petroleum, petrochemical and natural gas industries – Pressure-relieving and depressuring systems (ISO 23251:2006/Cor 1:2007)

  • EN ISO 23275-1:2008 Animal and vegetable fats and oils – Cocoa butter equivalents in cocoa butter and plain chocolate – Part 1: Determination of the presence of cocoa butter equivalents (ISO 23275-1:2006)

  • EN ISO 23275-2:2008 Animal and vegetable fats and oils – Cocoa butter equivalents in cocoa butter and plain chocolate – Part 2: Quantification of cocoa butter equivalents (ISO 23275-2:2006)

  • EN ISO 23277:2009 Non-destructive testing of welds – Penetrant testing of welds – Acceptance levels (ISO 23277:2006)

  • EN ISO 23278:2009 Non-destructive testing of welds – Magnetic particle testing of welds – Acceptance levels (ISO 23278:2006)

  • EN ISO 23279:2010 Non-destructive testing of welds – Ultrasonic testing – Characterization of indications in welds (ISO 23279:2010)

  • EN ISO 23328-1:2008 Breathing system filters for anaesthetic and respiratory use – Part 1: Salt test method to assess filtration performance (ISO 23328-1:2003)

  • EN ISO 23328-2:2009 Breathing system filters for anaesthetic and respiratory use – Part 2: Non-filtration aspects (ISO 23328-2:2002)

  • EN ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)

  • EN ISO 2342:2003 Slotted headless screws with shank (ISO 2342:2003)

  • EN ISO 23429:2004 Gauging of hexagon sockets (ISO 23429:2004)

  • EN ISO 23470:2011 Soil quality – Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO 23470:2007)

  • EN ISO 23553-1:2009 Safety and control devices for oil burners and oil-burning appliances – Particular requirements – Part 1: Shut-off devices for oil burners (ISO 23553-1:2007, including Cor 1:2009)

  • EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials – Measurement of coating thickness – Amplitude-sensitive eddy current method (ISO 2360:2003)

  • EN ISO 23606:2009 Textiles – Knitted fabrics – Representation and pattern design (ISO 23606:2009)

  • EN ISO 2361:1995 Electrodeposited nickel coatings on magnetic and non-magnetic substrates – Measurement of coating thickness – Magnetic method (ISO 2361:1982)

  • EN ISO 23611-1:2011 Soil quality – Sampling of soil invertebrates – Part 1: Hand-sorting and formalin extraction of earthworms (ISO 23611-1:2006)

  • EN ISO 23611-2:2011 Soil quality – Sampling of soil invertebrates – Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2006)

  • EN ISO 23611-3:2011 Soil quality – Sampling of soil invertebrates – Part 3: Sampling and soil extraction of enchytraeids (ISO 23611-3:2007)

  • EN ISO 23611-4:2011 Soil quality – Sampling of soil invertebrates – Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO 23611-4:2007)

  • EN ISO 23611-5:2013 Soil quality – Sampling of soil invertebrates – Part 5: Sampling and extraction of soil macro-invertebrates (ISO 23611-5:2011)

  • EN ISO 23611-6:2013 Soil quality – Sampling of soil invertebrates – Part 6: Guidance for the design of sampling programmes with soil invertebrates (ISO 23611-6:2012)

  • EN ISO 23631:2006 Water quality – Determination of dalapon, trichloroacetic acid and selected haloacetic acids – Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)

  • EN ISO 23631:2006/AC:2007 Water quality – Determination of dalapon, trichloroacetic acid and selected haloacetic acids – Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006)

  • EN ISO 23640:2013 In vitro diagnostic medical devices – Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011)

  • EN ISO 23747:2009 Anaesthetic and respiratory equipment – Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2007)

  • EN ISO 23753-1:2011 Soil Quality – Determination of dehydrogenase activity in soil – Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2005)

  • EN ISO 23753-2:2011 Soil Quality – Determination of dehydrogenase activity in soils – Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2005)

  • EN ISO 2376:2010 Anodizing of aluminium and its alloys – Determination of electric breakdown potential (ISO 2376:2010)

  • EN ISO 23811:2009 Paints and varnishes – Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)

  • EN ISO 23907:2012 Sharps injury protection – Requirements and test methods – Sharps containers (ISO 23907:2012)

  • EN ISO 23908:2013 Sharps injury protection – Requirements and test methods – Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011)

  • EN ISO 23910:2007 Leather – Physical and mechanical tests – Measurement of stitch tear resistance (ISO 23910:2007)

  • EN ISO 23913:2009 Water quality – Determination of chromium(VI) – Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006)

  • EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries – Non-metallic materials in contact with media related to oil and gas production – Part 1: Thermoplastics (ISO 23936-1:2009)

  • EN ISO 23936-2:2011 Petroleum, petrochemical and natural gas industries – Non-metallic materials in contact with media related to oil and gas production – Part 2: Elastomers (ISO 23936-2:2011)

  • EN ISO 23953-1:2005 Refrigerated display cabinets – Part 1: Vocabulary (ISO 23953-1:2005)

  • EN ISO 23953-1:2005/A1:2012 Refrigerated display cabinets – Part 1: Vocabulary – Amendment 1 (ISO 23953-1:2005/Amd 1:2012)

  • EN ISO 23953-2:2005 Refrigerated display cabinets – Part 2: Classification, requirements and test conditions (ISO 23953-2:2005)

  • EN ISO 23953-2:2005/A1:2012 Refrigerated display cabinets – Part 2: Classification, requirements and test conditions – Amendment 1 (ISO 23953-2:2005/Amd 1:2012, Corrected version 2012-04-15)

  • EN ISO 2398:2008 Rubber hoses, textile-reinforced, for compressed air – Specification (ISO 2398:2006)

  • EN ISO 23993:2010 Thermal insulation products for building equipment and industrial installations – Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01)

  • EN ISO 23996:2012 Resilient floor coverings – Determination of density (ISO 23996:2007)

  • EN ISO 23997:2012 Resilient floor coverings – Determination of mass per unit area (ISO 23997:2007)

  • EN ISO 23999:2012 Resilient floor coverings – Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008)

  • EN ISO 2400:2012 Non-destructive testing – Ultrasonic testing – Specification for calibration block No. 1 (ISO 2400:2012)

  • EN ISO 24011:2012 Resilient floor coverings – Specification for plain and decorative linoleum (ISO 24011:2009)

  • EN ISO 24013:2006 Optics and photonics – Lasers and laser-related equipment – Measurement of phase retardation of optical components for polarized laser radiation (ISO 24013:2006)

  • EN ISO 24014-1:2007 Public transport – Interoperable fare management system – Part 1: Architecture (ISO 24014-1:2007)

  • EN ISO 24034:2010 Welding consumables – Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys – Classification (ISO/FDIS 24034:2010)

  • EN ISO 2409:2013 Paints and varnishes – Cross-cut test (ISO 2409:2013)

  • EN ISO 2411:2000 Rubber- or plastics-coated fabrics – Determination of coating adhesion (ISO 2411:2000)

  • EN ISO 24157:2008 Ophthalmic optics and instruments – Reporting aberrations of the human eye (ISO 24157:2008)

  • EN ISO 2417:2002 Leather – Physical and mechanical tests – Determination of the static absorption of water (ISO 2417:2002)

  • EN ISO 2418:2002 Leather – Chemical, physical and mechanical and fastness tests – Sampling location (ISO 2418:2002)

  • EN ISO 2419:2012 Leather – Physical and mechanical tests – Sample preparation and conditioning (ISO 2419:2012)

  • EN ISO 2420:2002 Leather – Physical and mechanical tests – Determination of apparent density (ISO 2420:2002)

  • EN ISO 24234:2004 Dentistry – Mercury and alloys for dental amalgam (ISO 24234:2004)

  • EN ISO 24234:2004/A1:2011 Dentistry – Mercury and alloys for dental amalgam – Amendment 1: Requirements for marking and manufacturer’s instructions concerning mercury (ISO 24234:2004/A1:2011)

  • EN ISO 24276:2006 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – General requirements and definitions (ISO 24276:2006)

  • EN ISO 24276:2006/A1:2013 Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – General requirements and definitions (ISO 24276:2006/Amd 1:2013)

  • EN ISO 2431:2011 Paints and varnishes – Determination of flow time by use of flow cups (ISO 2431:2011)

  • EN ISO 24333:2009 Cereals and cereal products – Sampling (ISO 24333:2009)

  • EN ISO 24333:2009/AC:2010 Cereals and cereal products – Sampling (ISO 24333:2009)

  • EN ISO 24340:2012 Resilient floor coverings – Determination of thickness of layers (ISO 24340:2006)

  • EN ISO 24341:2012 Resilient and textile floor coverings – Determination of length, width and straightness of sheet (ISO 24341:2006)

  • EN ISO 24342:2012 Resilient and textile floor-coverings – Determination of side length, edge, straightness and squareness of tiles (ISO 24342:2007)

  • EN ISO 24342:2012/A1:2012 Resilient and textile floor-coverings – Determination of side length, edge straightness and squareness of tiles – Amendment 1 (ISO 24342:2007/Amd 1:2012)

  • EN ISO 24343-1:2012 Resilient and laminate floor coverings – Determination of indentation and residual indentation – Part 1: Residual indentation (ISO 24343-1:2007)

  • EN ISO 24344:2012 Resilient floor coverings – Determination of flexibility and deflection (ISO 24344:2008)

  • EN ISO 24345:2012 Resilient floor coverings – Determination of peel resistance (ISO 24345:2006)

  • EN ISO 24346:2012 Resilient floor coverings – Determination of overall thickness (ISO 24346:2006)

  • EN ISO 24373:2009 Welding consumables – Solid wires and rods for fusion welding of copper and copper alloys – Classification (ISO 24373:2008)

  • EN ISO 2439:2008 Flexible cellular polymeric materials – Determination of hardness (indentation technique) (ISO 2439:2008)

  • EN ISO 2440:1999 Flexible and rigid cellular polymeric materials – Accelerated ageing tests (ISO 2440:1997)

  • EN ISO 2440:1999/A1:2010 Flexible and rigid cellular polymeric materials – Accelerated ageing tests – Amendment 1 (ISO 2440:1997/Amd 1:2010)

  • EN ISO 24415-1:2009 Tips for assistive products for walking – Requirements and test methods – Part 1: Friction of tips (ISO 24415-1:2009)

  • EN ISO 24442:2011 Cosmetics – Sun protection test methods – In vivo determination of sunscreen UVA protection (ISO 24442:2011)

  • EN ISO 24443:2012 Determination of sunscreen UVA photoprotection in vitro (ISO 24443:2012)

  • EN ISO 24444:2010 Cosmetics – Sun protection test methods – In vivo determination of the sun protection factor (SPF) (ISO 24444:2010)

  • EN ISO 24450:2005 Laboratory glassware – Wide-necked boiling flasks (ISO 24450:2005)

  • EN ISO 2450:2008 Cream – Determination of fat content – Gravimetric method (Reference method) (ISO2450:2008)

  • EN ISO 24500:2010 Ergonomics – Accessible design – Auditory signals for consumer products (ISO 24500:2010)

  • EN ISO 24501:2010 Ergonomics – Accessible design – Sound pressure levels of auditory signals for consumer products (ISO 24501:2010)

  • EN ISO 24502:2010 Ergonomics – Accessible design – Specification of age-related luminance contrast for coloured light (ISO 24502:2010)

  • EN ISO 24503:2011 Ergonomics – Accessible design – Tactile dots and bars on consumer products (ISO 24503:2011)

  • EN ISO 24534-1:2010 Automatic vehicle and equipment identification – Electronic Registration Identification (ERI) for vehicles – Part 1: Architecture (ISO 24534-1:2010)

  • EN ISO 24534-2:2010 Automatic vehicle and equipment identification – Electronic Registration Identification (ERI) for vehicles – Part 2: Operational requirements (ISO 24534-2:2010)

  • EN ISO 24534-3:2010 Automatic vehicle and equipment identification – Electronic Registration Identification (ERI) for vehicles – Part 3: Vehicle data (ISO 24534-3:2010)

  • EN ISO 24534-4:2010 Automatic vehicle and equipment identification – Electronic Registration Identification (ERI) for vehicles – Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010)

  • EN ISO 24598:2012 Welding consumables – Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels – Classification (ISO 24598:2012)

  • EN ISO 2495:2000 Iron blue pigments – Specifications and methods of test (ISO 2495:1995)

  • EN ISO 24978:2009 Intelligent transport systems – ITS Safety and emergency messages using any available wireless media – Data registry procedures (ISO 24978:2009)

  • EN ISO 24998:2008 Plastics laboratory ware – Single-use Petri dishes for microbiological procedures (ISO 24998:2008)

  • EN ISO 2503:2009 Gas welding equipment – Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009)

  • EN ISO 2505:2005 Thermoplastics pipes – Longitudinal reversion – Test method and parameters (ISO 2505:2005)

  • EN ISO 25139:2011 Stationary source emissions – Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)

  • EN ISO 25140:2010 Stationary source emissions – Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)

  • EN ISO 25177:2011 Soil quality – Field soil description (ISO 25177:2008)

  • EN ISO 25178-2:2012 Geometrical product specifications (GPS) – Surface texture: Areal – Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)

  • EN ISO 25178-3:2012 Geometrical product specifications (GPS) – Surface texture: Areal – Part 3: Specification operators (ISO 25178-3:2012)

  • EN ISO 25178-6:2010 Geometrical product specifications (GPS) – Surface texture: Areal – Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)

  • EN ISO 25178-601:2010 Geometrical product specifications (GPS) – Surface texture: Areal – Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)

  • EN ISO 25178-602:2010 Geometrical product specifications (GPS) – Surface texture: Areal – Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)

  • EN ISO 25178-603:2013 Geometrical product specifications (GPS) – Surface texture: Areal – Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)

  • EN ISO 25178-604:2013 Geometrical product specifications (GPS) – Surface texture: Areal – Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)

  • EN ISO 25178-701:2010 Geometrical product specifications (GPS) – Surface texture: Areal – Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

  • EN ISO 25178-71:2012 Geometrical product specifications (GPS) – Surface texture: Areal – Part 71: Software measurement standards (ISO 25178-71:2012)

  • EN ISO 25197:2012 Small craft – Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012)

  • EN ISO 252:2007 Conveyor belts – Adhesion between constitutive elements – Test methods (ISO 252:2007)

  • EN ISO 25239-1:2011 Friction stir welding – Aluminium – Part 1: Vocabulary (ISO 25239-1:2011)

  • EN ISO 25239-2:2011 Friction stir welding – Aluminium – Part 2: Design of weld joints (ISO 25239-2:2011)

  • EN ISO 25239-3:2011 Friction stir welding – Aluminium – Part 3: Qualification of welding operators (ISO 25239-3:2011)

  • EN ISO 25239-4:2011 Friction stir welding – Aluminium – Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011)

  • EN ISO 25239-5:2011 Friction stir welding – Aluminium – Part 5: Quality and inspection requirements (ISO 25239-5:2011)

  • EN ISO 2535:2002 Plastics – Unsaturated polyester resins – Measurement of gel time at ambient temperature (ISO 2535:2001)

  • EN ISO 25378:2011 Geometrical product specifications (GPS) – Characteristics and conditions – Definitions (ISO 25378:2011)

  • EN ISO 2538:2003 Geometrical product specfications (GPS) – Series of angles and slopes on prisms (ISO 2538:1998)

  • EN ISO 25424:2011 Sterilization of medical devices – Low temperature steam and formaldehyde – Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009)

  • EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries – Flare details for general refinery and petrochemical service (ISO 25457:2008)

  • EN ISO 25539-1:2009 Cardiovascular implants – Endovascular devices – Part 1: Endovascular prostheses (ISO 25539-1:2003 including Amd 1:2005)

  • EN ISO 25539-1:2009/AC:2011 Cardiovascular implants – Endovascular devices – Part 1: Endovascular prostheses (ISO 25539-1:2003 including Amd 1:2005)

  • EN ISO 25539-2:2012 Cardiovascular implants – Endovascular devices – Part 2: Vascular stents (ISO 25539-2:2012)

  • EN ISO 25539-3:2011 Cardiovascular implants – Endovascular devices – Part 3: Vena cava filters (ISO 25539-3:2011)

  • EN ISO 2554:1998 Plastics – Unsaturated polyester resins – Determination of hydroxyl value (ISO 2554:1997)

  • EN ISO 2555:1999 Plastics – Resins in the liquid state or as emulsions or dispersions – Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)

  • EN ISO 2556:2000 Plastics – Determination of the gas transmission rate of films and thin sheets under atmospheric pressure – Manometric method (ISO 2556:1974)

  • EN ISO 2560:2009 Welding consumables – Covered electrodes for manual metal arc welding of non-alloy and fine grain steels – Classification (ISO 2560:2009)

  • EN ISO 25619-1:2008 Geosynthetics – Determination of compression behaviour – Part 1: Compressive creep properties (ISO 25619-1:2008)

  • EN ISO 25619-2:2008 Geosynthetics – Determination of compression behaviour – Part 2: Determination of short-term compression behaviour (ISO 25619-2:2008)

  • EN ISO 2566-1:1999 Steel – Conversion of elongation values – Part 1: Carbon and low alloy steels (ISO 2566-1:1984)

  • EN ISO 2566-2:1999 Steel – Conversion of elongation values – Part 2: Austenitic steels (ISO 2566-2:1984)

  • EN ISO 25745-1:2012 Energy performance of lifts, escalators and moving walks – Part 1: Energy measurement and verification (ISO 25745-1:2012)

  • EN ISO 25762:2012 Plastics – Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)

  • EN ISO 2578:1998 Plastics – Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

  • EN ISO 2580-1:2002 Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 2580-1:2002)

  • EN ISO 2580-2:2003 Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)

  • EN ISO 2589:2002 Leather – Physical and mechanical tests – Determination of thickness (ISO 2589:2002)

  • EN ISO 2592:2001 Determination of flash and fire points – Cleveland open cup method (ISO 2592:2000)

  • EN ISO 26082-1:2012 Leather – Physical and mechanical test methods for the determination of soiling – Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)

  • EN ISO 26082-2:2012 Leather – Physical and mechanical test methods for the determination of soiling – Part 2: Tumbling method (ISO 26082-2:2012)

  • EN ISO 26203-1:2010 Metallic materials – Tensile testing at high strain rates – Part 1: Elastic-bar-type systems (ISO 26203-1:2010)

  • EN ISO 26203-2:2011 Metallic materials – Tensile testing at high strain rates – Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011)

  • EN ISO 2624:1995 Copper and copper alloys – Estimation of average grain size (ISO 2624:1990)

  • EN ISO 2626:1995 Copper – Hydrogen embrittlement test (ISO 2626:1973)

  • EN ISO 26304:2011 Welding consumables – Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels – Classification (ISO 26304:2011)

  • EN ISO 2639:2002 Steels – Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002)

  • EN ISO 266:1997 Acoustics – Preferred frequencies (ISO 266:1997)

  • EN ISO 26782:2009 Anaesthetic and respiratory equipment – Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009)

  • EN ISO 26782:2009/AC:2009 Anaesthetic and respiratory equipment – Spirometers intended for the measurement of time forced expired volumes in humans – Technical Corrigendum 1 (ISO 26782:2009/Cor 1:2009)

  • EN ISO 26800:2011 Ergonomics – General approach, principles and concepts (ISO 26800:2011)

  • EN ISO 26845:2008 Chemical analysis of refractories – General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008)

  • EN ISO 26909:2010 Springs – Vocabulary (ISO 26909:2009)

  • EN ISO 2692:2006 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006)

  • EN ISO 26945:2011 Metallic and other inorganic coatings – Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)

  • EN ISO 26985:2012 Resilient floor coverings – Identification of linoleum and determination of cement content and ash residue (ISO 26985:2008)

  • EN ISO 26986:2012 Resilient floor coverings – Expanded (cushioned) poly(vinyl chloride) floor covering – Specification (ISO 26986:2010)

  • EN ISO 26986:2012/AC:2012 Resilient floor coverings – Expanded (cushioned) poly(vinyl chloride) floor covering – Specification (ISO 26986:2010)

  • EN ISO 26987:2012 Resilient floor coverings – Determination of staining and resistance to chemicals (ISO 26987:2008)

  • EN ISO 2702:2011 Heat-treated steel tapping screws – Mechanical properties (ISO 2702:2011)

  • EN ISO 27020:2010 Dentistry – Brackets and tubes for use in orthodontics (ISO 27020:2010)

  • EN ISO 27107:2010 Animal and vegetable fats and oils – Determination of peroxide value – Potentiometric end-point determination (ISO 27107:2008, corrected version 2009-05-15 )

  • EN ISO 27108:2013 Water quality – Determination of selected plant treatment agents and biocide products – Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010)

  • EN ISO 2719:2002 Determination of flash point – Pensky-Martens closed cup method (ISO 2719:2002)

  • EN ISO 2738:1999 Sintered metal materials, excluding hardmetals – Permeable sintered metal materials – Determination of density, oil content and open porosity (ISO 2738:1999)

  • EN ISO 2739:2012 Sintered metal bushings – Determination of radial crushing strength (ISO 2739:2012)

  • EN ISO 2740:2009 Sintered metal materials, excluding hardmetals – Tensile test pieces (ISO 2740:2009)

  • EN ISO 27509:2012 Petroleum and natural gas industries – Compact flanged connections with IX seal ring (ISO 27509:2012)

  • EN ISO 27509:2012/AC:2013 Petroleum and natural gas industries – Compact flanged connections with IX seal ring – Technical Corrigendum 1 (ISO 27509:2012/Cor 1:2013)

  • EN ISO 2758:2003 Paper – Determination of bursting strength (ISO 2758:2001)

  • EN ISO 27587:2009 Leather – Chemical tests – Determination of the free formaldehyde in process auxiliaries (ISO 27587:2009)

  • EN ISO 2759:2003 Board – Determination of bursting strength (ISO 2759:2001)

  • EN ISO 276:2010 Binders for paints and varnishes – Linseed stand oil – Requirements and methods of test (ISO 276:2002)

  • EN ISO 277:2010 Binders for paints and varnishes – Raw tung oil – Requirements and methods of test (ISO 277:2002)

  • EN ISO 27789:2013 Health informatics – Audit trails for electronic health records (ISO 27789:2013)

  • EN ISO 27799:2008 Health informatics – Information security management in health using ISO/IEC 27002 (ISO 27799:2008)

  • EN ISO 27830:2013 Metallic and other inorganic coatings – Guidelines for specifying metallic and inorganic coatings (ISO 27830:2008)

  • EN ISO 27874:2008 Metallic and other inorganic coatings – Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes – Specification and test methods (ISO 27874:2008)

  • EN ISO 27953-1:2011 Health informatics – Individual case safety reports (ICSRs) in pharmacovigilance – Part 1: Framework for adverse event reporting (ISO 27953-1:2011)

  • EN ISO 27953-2:2011 Health informatics – Individual case safety reports (ICSRs) in pharmacovigilance – Part 2: Human pharmaceutical reporting requirements for ICSR (ISO 27953-2:2011)

  • EN ISO 27971:2008 Cereals and cereal products – Common wheat (Triticum aestivum L.) – Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2008)

  • EN ISO 28017:2011 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification (ISO 28017:2011)

  • EN ISO 2808:2007 Paints and varnishes – Determination of film thickness (ISO 2808:2007)

  • EN ISO 2810:2004 Paints and varnishes – Natural weathering of coatings – Exposure and assessment (ISO 2810:2004)

  • EN ISO 2811-1:2011 Paints and varnishes – Determination of density – Part 1: Pyknometer method (ISO 2811-1:2011)

  • EN ISO 2811-2:2011 Paints and varnishes – Determination of density – Part 2: Immersed body (plummet) method (ISO 2811-2:2011)

  • EN ISO 2811-3:2011 Paints and varnishes – Determination of density – Part 3: Oscillation method (ISO 2811-3:2011)

  • EN ISO 2811-4:2011 Paints and varnishes – Determination of density – Part 4: Pressure cup method (ISO 2811-4:2011)

  • EN ISO 2812-1:2007 Paints and varnishes – Determination of resistance to liquids – Part 1: Immersion in liquids other than water (ISO 2812-1:2007)

  • EN ISO 2812-2:2007 Paints and varnishes – Determination of resistance to liquids – Part 2: Water immersion method (ISO 2812-2:2007)

  • EN ISO 2812-3:2012 Paints and varnishes – Determination of resistance to liquids – Part 3: Method using an absorbent medium (ISO 2812-3:2012)

  • EN ISO 2812-4:2007 Paints and varnishes – Determination of resistance to liquids – Part 4: Spotting methods (ISO 2812-4:2007)

  • EN ISO 2812-5:2007 Paints and varnishes – Determination of resistance to liquids – Part 5: Temperature-gradient oven method (ISO 2812-5:2007)

  • EN ISO 2813:1999 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997)

  • EN ISO 28139:2009 Agricultural and forestry machinery – Knapsack combustion-engine-driven mistblowers – Safety requirements (ISO 28139:2009)

  • EN ISO 2814:2006 Paints and varnishes – Comparison of contrast ratio (hiding power) of paints of the same type and colour (ISO 2814:1973)

  • EN ISO 2815:2003 Paints and varnishes – Buchholz indentation test (ISO 2815:2003)

  • EN ISO 28158:2010 Dentistry – Integrated dental floss and handles (ISO 28158:2010)

  • EN ISO 2818:1996 Plastics – Preparation of test specimens by machining (ISO 2818:1994)

  • EN ISO 2819:1994 Metallic coatings on metallic substrates – Electrodeposited and chemically deposited coatings – Review of methods available for testing adhesion (ISO 2819:1980)

  • EN ISO 28199-1:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009)

  • EN ISO 28199-1:2009/AC:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 1: Relevant vocabulary and preparation of test panels – Technical Corrigendum 1 (ISO 28199-1:2009/Cor 1:2009)

  • EN ISO 28199-2:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)

  • EN ISO 28199-3:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2009)

  • EN ISO 2825:2010 Spices and condiments – Preparation of a ground sample for analysis (ISO 2825:1981)

  • EN ISO 28258:2013 Soil quality – Digital exchange of soil-related data (ISO 28258:2013)

  • EN ISO 283:2007 Textile conveyor belts – Full thickness tensile strength, elongation at break and elongation at the reference load – Test method (ISO 283:2007)

  • EN ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008)

  • EN ISO 28300:2008/AC:2009 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008/Cor 1:2009)

  • EN ISO 28319:2010 Dentistry – Laser welding (ISO 28319:2010)

  • EN ISO 28399:2011 Dentistry – Products for external tooth bleaching (ISO 28399:2011)

  • EN ISO 284:2012 Conveyor belts – Electrical conductivity – Specification and test method (ISO 284:2012)

  • EN ISO 28439:2011 Workplace atmospheres – Characterization of ultrafine aerosols/nanoaerosols – Determination of the size distribution and number concentration using differential electrical mobility analysing systems (ISO 28439:2011)

  • EN ISO 28460:2010 Petroleum and natural gas industries – Installation and equipment for liquefied natural gas – Ship-to-shore interface and port operations (ISO 28460:2010)

  • EN ISO 2858:2010 End-suction centrifugal pumps (rating 16 bar) – Designation, nominal duty point and dimensions (ISO 2858:1975)

  • EN ISO 2860:2008 Earth-moving machinery – Minimum access dimensions (ISO 2860:1992)

  • EN ISO 286-1:2010 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)

  • EN ISO 286-1:2010/AC:2013 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits – Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)

  • EN ISO 286-2:2010 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

  • EN ISO 286-2:2010/AC:2013 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts – Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

  • EN ISO 2867:2011 Earth-moving machinery – Access systems (ISO 2867:2011)

  • EN ISO 287:2009 Paper and board – Determination of moisture content of a lot – Oven-drying method (ISO 287:2009)

  • EN ISO 2870:2009 Surface active agents – Detergents – Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions (ISO 2870:2009)

  • EN ISO 28706-1:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)

  • EN ISO 28706-2:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008)

  • EN ISO 28706-3:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008)

  • EN ISO 28706-4:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2008)

  • EN ISO 28706-5:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010)

  • EN ISO 2871-1:2010 Surface active agents – Detergents – Determination of cationic-active matter content – Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)

  • EN ISO 2871-2:2010 Surface active agents – Detergents – Determination of cationic-active matter content – Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

  • EN ISO 28721-1:2011 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2008)

  • EN ISO 28721-2:2011 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2008)

  • EN ISO 28721-3:2011 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 3: Thermal shock resistance (ISO 28721-3:2008)

  • EN ISO 28721-4:2012 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010)

  • EN ISO 28722:2011 Vitreous and porcelain enamels – Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)

  • EN ISO 28723:2011 Vitreous and porcelain enamels – Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008)

  • EN ISO 2873:2002 Packaging – Complete, filled transport packages and unit loads – Low pressure test (ISO 2873:2000)

  • EN ISO 2875:2002 Packaging – Complete, filled transport packages and unit loads – Water-spray test (ISO 2875:2000)

  • EN ISO 28762:2010 Vitreous and porcelain enamels – Enamel coatings applied to steel for writing surfaces – Specification (ISO 28762:2010)

  • EN ISO 28763:2011 Vitreous and porcelain enamels – Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers – Specifications (ISO 28763:2008)

  • EN ISO 28764:2011 Vitreous and porcelain enamels – Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008)

  • EN ISO 28765:2011 Vitreous and porcelain enamels – Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2008)

  • EN ISO 28781:2010 Petroleum and natural gas industries – Drilling and production equipment – Subsurface barrier valves and related equipment (ISO 28781:2010)

  • EN ISO 28802:2012 Ergonomics of the physical environment – Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012)

  • EN ISO 28803:2012 Ergonomics of the physical environment – Application of international standards to people with special requirements (ISO 28803:2012)

  • EN ISO 2884-1:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)

  • EN ISO 2884-2:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)

  • EN ISO 28881:2013 Machine tools – Safety – Electro-discharge machines (ISO 28881:2013)

  • EN ISO 28881:2013/AC:2013 Machine tools – Safety – Electro-discharge machines – Technical Corrigendum 1 (ISO 28881:2013/Cor 1:2013)

  • EN ISO 28888:2013 Dentistry – Screening method for erosion potential of oral rinses on dental hard tissues (ISO 28888:2013)

  • EN ISO 28927-1:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1:2009)

  • EN ISO 28927-10:2011 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)

  • EN ISO 28927-11:2011 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 11: Stone hammers (ISO 28927-11:2011)

  • EN ISO 28927-12:2012 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die grinders (ISO 28927-12:2012)

  • EN ISO 28927-2:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

  • EN ISO 28927-3:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)

  • EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)

  • EN ISO 28927-5:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills (ISO 28927-5:2009)

  • EN ISO 28927-6:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 6: Rammers (ISO 28927-6:2009)

  • EN ISO 28927-7:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 7: Nibblers and shears (ISO 28927-7:2009)

  • EN ISO 28927-8:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)

  • EN ISO 28927-9:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)

  • EN ISO 28941-1:2008 Plastics – Poly(phenylene ether) (PPE) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 28941-1:2008)

  • EN ISO 2897-1:1999 Plastics – Impact-resistant polystyrene (PS-I) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 2897-1:1997)

  • EN ISO 2897-2:2003 Plastics – Impact-resistant polystyrene (PS-I) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)

  • EN ISO 2898-1:1999 Plastics – Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 2898-1:1996)

  • EN ISO 2898-2:2008 Plastics – Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)

  • EN ISO 29022:2013 Dentistry – Adhesion – Notched-edge shear bond strength test (ISO 29022:2013)

  • EN ISO 291:2008 Plastics – Standard atmospheres for conditioning and testing (ISO 291:2008)

  • EN ISO 2922:2000 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000)

  • EN ISO 2922:2000/A1:2013 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours – Amendment 1 (ISO 2922:2000/Amd 1:2013)

  • EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)

  • EN ISO 2931:2010 Anodizing of aluminium and its alloys – Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010)

  • EN ISO 294-1:1998 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996)

  • EN ISO 294-1:1998/A1:2002 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001)

  • EN ISO 294-2:1998 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:1996)

  • EN ISO 294-2:1998/A1:2005 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)

  • EN ISO 294-3:2003 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates (ISO 294-3:2002)

  • EN ISO 294-4:2003 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 4: Determination of moulding shrinkage (ISO 294-4:2001)

  • EN ISO 294-5:2013 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)

  • EN ISO 29461-1:2013 Air intake filter systems for rotary machinery – Test methods – Part 1: Static filter elements (ISO 29461-1:2013)

  • EN ISO 29462:2013 Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow (ISO 29462:2013)

  • EN ISO 295:2004 Plastics – Compression moulding of test specimens of thermosetting materials (ISO 295:2004)

  • EN ISO 29601:2011 Paints and varnishes – Corrosion protection by protective paint systems – Assessment of porosity in a dry film (ISO 29601:2011)

  • EN ISO 29621:2011 Cosmetics – Microbiology – Guidelines for the risk assessment and identification of microbiologically low-risk products (ISO 29621:2010)

  • EN ISO 29701:2010 Nanotechnologies – Endotoxin test on nanomaterial samples for in vitro systems – Limulus amebocyte lysate (LAL) test (ISO 29701:2010)

  • EN ISO 3001:1999 Plastics – Epoxy compounds – Determination of epoxy equivalent (ISO 3001:1999)

  • EN ISO 30013:2011 Rubber and plastics hoses – Methods of exposure to laboratory light sources – Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)

  • EN ISO 30023:2012 Textiles – Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010)

  • EN ISO 30024:2009 Animal feeding stuffs – Determination of phytase activity (ISO 30024:2009)

  • EN ISO 3035:2011 Corrugated fibreboard – Determination of flat crush resistance (ISO 3035:2011)

  • EN ISO 3037:2013 Corrugated fibreboard – Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013)

  • EN ISO 3040:2012 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones (ISO 3040:2009)

  • EN ISO 305:1999 Plastics – Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds – Discoloration method (ISO 305:1990)

  • EN ISO 3059:2012 Non-destructive testing – Penetrant testing and magnetic particle testing – Viewing conditions (ISO 3059:2012)

  • EN ISO 306:2004 Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST) (ISO 306:2004)

  • EN ISO 307:2007 Plastics – Polyamides – Determination of viscosity number (ISO 307:2007)

  • EN ISO 307:2007/A1:2013 Plastics – Polyamides – Determination of viscosity number – Amendment 1: Corrections, and update to reference to JIS K 6920-2 (ISO 307:2007/Amd 1:2013)

  • EN ISO 3071:2006 Textiles – Determination of pH of aqueous extract (ISO 3071:2005)

  • EN ISO 308:1997 Plastics – Phenolic moulding materials – Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994)

  • EN ISO 3093:2009 Wheat, rye and their flours, durum wheat and durum wheat semolina – Determination of the falling number according to Hagberg-Perten (ISO 3093:2009)

  • EN ISO 3095:2013 Acoustics – Railway applications – Measurement of noise emitted by railbound vehicles (ISO 3095:2013)

  • EN ISO 3098-0:1997 Technical product documentation – Lettering – Part 0: General requirements (ISO 3098-0:1997)

  • EN ISO 3098-2:2000 Technical product documentation – Lettering – Part 2: Latin alphabet, numberal and marks (ISO 3098-2:2000)

  • EN ISO 3098-3:2000 Technical product documentation – Lettering – Part 3: Greek alphabet (ISO 3098-3:2000)

  • EN ISO 3098-4:2000 Technical product documentation – Lettering – Part 4: Diacritical and particular marks for the latin alphabet (ISO 3098-4:2000)

  • EN ISO 3098-5:1997 Technical product documentation – Lettering – Part 5: CAD lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997)

  • EN ISO 3098-6:2000 Technical product documentation – Lettering – Part 6: Cyrillic alphabet (ISO 3098-6:2000)

  • EN ISO 3104:1996 Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)

  • EN ISO 3104:1996/AC:1999 Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)

  • EN ISO 3107:2011 Dentistry – Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107:2011)

  • EN ISO 3126:2005 Plastics piping systems – Plastics components – Determination of dimensions (ISO 3126:2005)

  • EN ISO 3146:2000 Plastics – Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)

  • EN ISO 3146:2000/AC:2003 Plastics – Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)

  • EN ISO 3164:2013 Earth-moving machinery – Laboratory evaluations of protective structures – Specifications for deflection-limiting volume (ISO 3164:2013)

  • EN ISO 3166-1:2006 Codes for the representation of names of countries and their subdivisions – Part 1: Country codes (ISO 3166-1:2006)

  • EN ISO 3166-1:2006/AC:2008 Codes for the representation of names of countries and their subdivisions – Part 1: Country codes (ISO 3166-1:2006/Cor 1:2007)

  • EN ISO 3170:2004 Petroleum liquids – Manual sampling (ISO 3170:2004)

  • EN ISO 3171:1999 Petroleum liquids – Automatic pipeline sampling (ISO 3171:1988)

  • EN ISO 3175-1:2010 Textiles – Professional care, drycleaning and wetcleaning of fabrics and garments – Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2010)

  • EN ISO 3175-2:2010 Textiles – Professional care, drycleaning and wetcleaning of fabrics and garments – Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene (ISO 3175-2:2010)

  • EN ISO 3175-3:2003 Textiles – Professional care, drycleaning and wetcleaning of fabrics and garments – Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvent (ISO 3175-3:2003)

  • EN ISO 3175-3:2003/AC:2012 Textiles – Professional care, drycleaning and wetcleaning of fabrics and garments – Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents – Technical Corrigendum 1 (ISO 3175-3:2003/Cor 1:2009)

  • EN ISO 3175-4:2003 Textiles – Professional care, drycleaning and wetcleaning of fabrics and garments – Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003)

  • EN ISO 3175-4:2003/AC:2012 Textiles – Professional care, drycleaning and wetcleaning of fabrics and garments – Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning – Technical Corrigendum 1 (ISO 3175-4:2003/Cor 1:2009)

  • EN ISO 3183:2012 Petroleum and natural gas industries – Steel pipe for pipeline transportation systems (ISO 

  • EN ISO 3188:1994 Starches and derived products – Determination of nitrogen content by the Kjeldahl method – Titrimetric method (ISO 3188:1978)

  • EN ISO 3210:2010 Anodizing of aluminium and its alloys – Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution (ISO 3210:2010)

  • EN ISO 32100:2010 Rubber- or plastics-coated fabrics – Physical and mechanical tests – Determination of flex resistance by the flexometer method (ISO 32100:2010)

  • EN ISO 3211:2010 Anodizing of aluminium and its alloys – Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)

  • EN ISO 3219:1994 Plastics – Polymers/resins in the liquid state or as emulsions or dispersions – Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)

  • EN ISO 3231:1997 Paints and varnishes – Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)

  • EN ISO 3233-1:2013 Paints and varnishes – Determination of the percentage volume of non-volatile matter – Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013)

  • EN ISO 3248:2000 Paints and varnishes – Determination of the effect of heat (ISO 3248:1998)

  • EN ISO 3251:2008 Paints, varnishes and plastics – Determination of non-volatile-matter content (ISO 3251:2008)

  • EN ISO 3252:2000 Powder metallurgy – Vocabulary (ISO 3252:1999)

  • EN ISO 3262-1:1998 Extenders for paints – Specifications and methods of test – Part 1:Introduction and general test methods (ISO 3262-1:1997)

  • EN ISO 3262-10:2000 Extenders for paints – Specifications and methods of test – Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2000)

  • EN ISO 3262-11:2000 Extenders for paints – Specifications and methods of test – Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000)

  • EN ISO 3262-12:2001 Extenders for paints – Specifications and methods of test – Part 12: Muscovite-type mica (ISO 3262-12:2001)

  • EN ISO 3262-13:1998 Extenders for paints – Specifications and methods of test – Part 13: Natural quartz (ground) (ISO 3262-13:1997)

  • EN ISO 3262-14:2000 Extenders for paints – Specifications and methods of test – Part 14: Cristobalite (ISO 3262-14:2000)

  • EN ISO 3262-15:2000 Extenders for paints – Specifications and methods of test – Part 15: Vitreous silica (ISO 3262-15:2000)

  • EN ISO 3262-16:2000 Extenders for paints – Specifications and methods of test – Part 16: Aluminium hydroxides (ISO 3262-16:2000)

  • EN ISO 3262-17:2000 Extenders for paints – Specifications and methods of test – Part 17: Precipitated calcium silicate (ISO 3262-17:2000)

  • EN ISO 3262-18:2000 Extenders for paints – Specifications and methods of test – Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000)

  • EN ISO 3262-19:2000 Extenders for paints – Specifications and methods of test – Part 19: Precipitated silica (ISO 3262-19:2000)

  • EN ISO 3262-2:1998 Extenders for paints – Specifications and methods of test – Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998)

  • EN ISO 3262-20:2000 Extenders for paints – Specifications and methods of test – Part 20: Fumed silica (ISO 3262-20:2000)

  • EN ISO 3262-21:2000 Extenders for paints – Specifications and methods of test – Part 21: Silica sand (unground natural quartz) (ISO 3262:2000)

  • EN ISO 3262-22:2001 Extenders for paints – Specifications and methods of test – Part 22: Flux-calcined kieselguhr (ISO 3262-22:2001)

  • EN ISO 3262-3:1998 Extenders for paints – Specifications and methods of test – Part 3: Blanc fixe (ISO 3262-3:1998)

  • EN ISO 3262-4:1998 Extenders for paints – Specifications and methods of test – Part 4: Whiting (ISO 3262-4:1998)

  • EN ISO 3262-5:1998 Extenders for paints – Specifications and methods of test – Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998)

  • EN ISO 3262-6:1998 Extenders for paints – Specifications and methods of test – Part 6: Precipitated calcium carbonate (ISO 3262-6:1998)

  • EN ISO 3262-7:1998 Extenders for paints – Specifications and methods of test – Part 7: Dolomite (ISO 3262-7:1998)

  • EN ISO 3262-8:1999 Extenders for paints – Specifications and methods of test – Part 8: Natural clay (ISO 3262-8:1999)

  • EN ISO 3262-9:1998 Extenders for paints – Specifications and methods of test – Part 9: Calcined clay (ISO 3262-9:1997)

  • EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

  • EN ISO 3269:2000 Fasteners – Acceptance inspection (ISO 3269:2000)

  • EN ISO 3274:1997 Geometrical product specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments (ISO 3274:1996)

  • EN ISO 3325:1999 Sintered metal materials, excluding hardmetals – Determination of transverse rupture strength (ISO 3325:1996)

  • EN ISO 3325:1999/A1:2002 Sintered metal materials, excluding hardmetals – Determination of transverse rupture strength – Amendment 1: Precision statement (ISO 3325:1996/Amd. 1:2001)

  • EN ISO 3326:2013 Hardmetals – Determination of (the magnetization) coercivity (ISO 3326:2013)

  • EN ISO 3327:2009 Hardmetals – Determination of transverse rupture strength (ISO 3327:2009)

  • EN ISO 3344:1997 Reinforcement products – Determination of moisture content (ISO 3344:1997)

  • EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals – Determination of density (ISO 3369:2006)

  • EN ISO 3376:2011 Leather – Physical and mechanical tests – Determination of tensile strength and percentage extension (ISO 3376:2011)

  • EN ISO 3377-1:2011 Leather – Physical and mechanical tests – Determination of tear load – Part 1: Single edge tear (ISO 3377-1:2011)

  • EN ISO 3377-2:2002 Leather – Physical and mechanical tests – Determination of tear load – Part 2: Double edge tear (ISO 3377-2:2002)

  • EN ISO 3378:2002 Leather – Physical and mechanical tests – Determination of resistance to grain cracking and grain crack index (ISO 3378:2002)

  • EN ISO 3380:2002 Leather – Physical and mechanical tests – Determination of shrinkage temperature up to 100 degrees C (ISO 3380:2002)

  • EN ISO 3381:2011 Railway applications – Acoustics – Measurement of noise inside railbound vehicles (ISO 3381:2005)

  • EN ISO 3382-1:2009 Acoustics – Measurement of room acoustic parameters – Part 1: Performance spaces (ISO 3382-1:2009)

  • EN ISO 3382-2:2008 Acoustics – Measurement of room acoustic parameters – Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008)

  • EN ISO 3382-2:2008/AC:2009 Acoustics – Measurement of room acoustic parameters – Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008/Cor 1:2009)

  • EN ISO 3382-3:2012 Acoustics – Measurement of room acoustic parameters – Part 3: Open plan offices (ISO 3382-3:2012)

  • EN ISO 3385:1995 Flexible cellular polymeric materials – Determination of fatigue by constant-load pounding (ISO 3385:1989)

  • EN ISO 3386-1:1997 Polymeric materials, cellular flexible – Determination of stress-strain characteristic in compression – Part 1: Low-density materials (ISO 3386-1:1986)

  • EN ISO 3386-1:1997/A1:2010 Polymeric materials, cellular flexible – Determination of stress-strain characteristics in compression – Part 1: Low-density materials – Amendment 1 (ISO 3386-1:1986/Amd 1:2010)

  • EN ISO 3386-2:1998 Flexible cellular polymeric materials – Determination of stress-strain characteristics in compression – Part 2: High-density materials (ISO 3386-2:1997)

  • EN ISO 3386-2:1998/A1:2010 Flexible cellular polymeric materials – Determination of stress-strain characteristics in compression – Part 2: High-density materials – Amendment 1 (ISO 3386-2:1997/Amd 1:2010)

  • EN ISO 340:2013 Conveyor belts – Laboratory scale flammability characteristics – Requirements and test method (ISO 340:2013)

  • EN ISO 3405:2011 Petroleum products – Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011)

  • EN ISO 3411:2007 Earth-moving machinery – Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

  • EN ISO 3449:2008 Earth-moving machinery – Falling-object protective structures – Laboratory tests and performance requirements (ISO 3449:2005)

  • EN ISO 3450:2011 Earth-moving machinery – Wheeled or high-speed rubber-tracked machines – Performance requirements and test procedures for brake systems (ISO 3450:2011)

  • EN ISO 3451-1:2008 Plastics – Determination of ash – Part 1: General methods (ISO 3451-1:2008)

  • EN ISO 3451-4:2000 Plastics – Determination of ash – Part 4: Polyamides (ISO 3451-4:1998)

  • EN ISO 3451-5:2002 Plastics – Determination of ash – Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)

  • EN ISO 3452-1:2013 Non-destructive testing – Penetrant testing – Part 1: General principles (ISO 3452-1:2013)

  • EN ISO 3452-2:2006 Non-destructive testing – Penetrant testing – Part 2: Testing of penetrant materials (ISO 3452-2:2006)

  • EN ISO 3452-3:1998 Non-destructive testing – Penetrant testing – Part 3: Reference test blocks (ISO 3452-3:1998)

  • EN ISO 3452-3:1998/AC:2001 Non-destructive testing – Penetrant testing – Part 3: Reference test blocks (ISO 3452-3:1998)

  • EN ISO 3452-4:1998 Non-destructive testing – Penetrant testing – Part 4: Equipment (ISO 3452-4:1998)

  • EN ISO 3452-5:2008 Non-destructive testing – Penetrant testing – Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)

  • EN ISO 3452-6:2008 Non-destructive testing – Penetrant testing – Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)

  • EN ISO 3457:2008 Earth-moving machinery – Guards – Definitions and requirements (ISO 3457:2003)

  • EN ISO 3471:2008 Earth-moving machinery – Roll-over protective structures – Laboratory tests and performance requirements (ISO 3471:2008)

  • EN ISO 3493:2007 Vanilla – Vocabulary (ISO 3493:1999)

  • EN ISO 3497:2000 Metallic coatings – Measurement of coating thickness – X-ray spectrometric methods (ISO 3497:2000)

  • EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners – Part 1: Bolts, screws and studs (ISO 3506-1:2009)

  • EN ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners – Part 2: Nuts (ISO 3506-2:2009)

  • EN ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners – Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)

  • EN ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners – Part 4: Tapping screws (ISO 3506-4:2009)

  • EN ISO 3521:1999 Plastics – Unsaturated polyester and epoxy resins – Determination of overall volume shrinkage (ISO 3521:1997)

  • EN ISO 354:2003 Acoustics – Measurement of sound absorption in a reverberation room (ISO 354:2003)

  • EN ISO 3543:2000 Metallic and non-metallic coatings – Measurement of thickness – Beta backscatter method (ISO 3543:2000)

  • EN ISO 3543:2000/AC:2006 Metallic and non-metallic coatings – Measurement of thickness – Beta backscatter method (ISO 3543:2000/Cor.1:2003)

  • EN ISO 3549:2002 Zinc dust pigments for paints – Specifications and test methods (ISO 3549:1995)

  • EN ISO 3580:2011 Welding consumables – Covered electrodes for manual metal arc welding of creep-resisting steels – Classification (ISO 3580:2010)

  • EN ISO 3581:2012 Welding consumables – Covered electrodes for manual metal arc welding of stainless and heat-resisting steels – Classification (ISO 3581:2003+Cor 1:2008+Amd 1:2011)

  • EN ISO 3582:2000 Flexible cellular polymeric materials – Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000)

  • EN ISO 3582:2000/A1:2007 Flexible cellular polymeric materials – Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame – Amendment 1 (ISO 3582:2000/Amd 1:2007)

  • EN ISO 3593:1994 Starch – Determination of ash (ISO 3593:1981)

  • EN ISO 3596:2001 Animal and vegetable fats and oils – Determination of unsaponifiable matter – Method using diethyl ether extraction

  • EN ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics (ISO 3611:2010)

  • EN ISO 3613:2010 Metallic and other inorganic coatings – Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys – Test methods (ISO 3613:2010)

  • EN ISO 3630-1:2008 Dentistry – Root-canal instruments – Part 1: General requirements and test methods (ISO 3630-1:2008)

  • EN ISO 3630-2:2013 Dentistry – Endodontic instruments – Part 2: Enlargers (ISO 3630-2:2013)

  • EN ISO 3630-3:1996 Dental root-canal instruments – Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994)

  • EN ISO 3630-4:2009 Dentistry – Root canal instruments – Part 4: Auxiliary instruments (ISO 3630-4:2009)

  • EN ISO 3630-5:2011 Dentistry – Endodontic instruments – Part 5: Shaping and cleaning instruments (ISO 3630-5:2011)

  • EN ISO 3650:1998 Geometrical product specifications (GPS) – Length standards – Gauge blocks (ISO 3650:1998)

  • EN ISO 3650:1998/AC:2009 Geometrical product specifications (GPS) – Length standards – Gauge blocks (ISO 3650:1998/Cor 1:2008)

  • EN ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels – Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels – Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)

  • EN ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels – Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels – Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)

  • EN ISO 3656:2011 Animal and vegetable fats and oils – Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2011)

  • EN ISO 3657:2013 Animal and vegetable fats and oils – Determination of saponification value (ISO 3657:2013)

  • EN ISO 3661:2010 End-suction centrifugal pumps – Baseplate and installation dimensions (ISO 3661:1977)

  • EN ISO 3665:2013 Photography – Intra-oral dental radiographic film and film packets – Manufacturer specifications (ISO 3665:2011)

  • EN ISO 3668:2001 Paints and varnishes – Visual comparison of the colour of paints (ISO 3668:1998)

  • EN ISO 3671:1998 Plastics – Aminoplastic moulding materials – Determination of volatile matter (ISO 3671:1976)

  • EN ISO 3672-1:2001 Plastics – Unsaturated-polyester resins (UP-R) – Part 1: Designation system (ISO 3672-1:2000)

  • EN ISO 3672-2:2001 Plastics – Unsaturated-polyester resins (UP-R) – Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)

  • EN ISO 3673-1:1999 Plastics – Epoxy resins – Part 1: Designation (ISO 3673-1:1996)

  • EN ISO 3673-2:2012 Plastics – Epoxy resins – Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)

  • EN ISO 3675:1998 Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method (ISO 3675:1998)

  • EN ISO 3677:1995 Filler metal for soft soldering, brazing and braze welding – Designation (ISO 3677:1992)

  • EN ISO 3679:2004 Determination of flash point – Rapid equilibrium closed cup method (ISO 3679:2004)

  • EN ISO 3680:2004 Determination of flash/no flash – Rapid equilibrium closed cup method (ISO 3680:2004)

  • EN ISO 3681:1998 Binders for paints and varnishes – Determination of saponification value – Titrimetric method (ISO 3681:1996)

  • EN ISO 3690:2012 Welding and allied processes – Determination of hydrogen content in arc weld metal (ISO 3690:2012)

  • EN ISO 3691-1:2012 Industrial trucks – Safety requirements and verification – Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011)

  • EN ISO 3691-1:2012/AC:2013 Industrial trucks – Safety requirements and verification – Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks – Technical Corrigendum 1 (ISO 3691-1:2011/Cor 1:2013)

  • EN ISO 3691-5:2009 Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009)

  • EN ISO 3691-6:2013 Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6:2013)

  • EN ISO 3696:1995 Water for analytical laboratory use – Specification and test methods (ISO 3696:1987)

  • EN ISO 3715-1:2004 Ships and marine technology – Propulsion plants for ships – Part 1: Vocabulary for geometry of propellers (ISO 3715-1:2002)

  • EN ISO 3715-2:2002 Ships and marine technology – Propulsion plants for ships – Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001)

  • EN ISO 3727-1:2001 Butter – Determination of moisture, non-fat solids and fat contents – Part 1: Determination of moisture content (Reference method) (ISO 3727-1:2001)

  • EN ISO 3727-2:2001 Butter – Determination of moisture, non-fat solids and fat contents – Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001)

  • EN ISO 3727-3:2003 Butter – Determination of moisture, non-fat solids and fat contents – Part 3: Calculation of fat content (ISO 3727-3:2003)

  • EN ISO 3735:1999 Crude petroleum and fuel oils – Determination of sediment – Extraction method (ISO 3735:1999)

  • EN ISO 3738-1:2010 Hardmetals – Rockwell hardness test (scale A) – Part 1: Test method (ISO 3738-1:1982)

  • EN ISO 3738-2:2006 Hardmetals – Rockwell hardness test (scale A) – Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988)

  • EN ISO 3740:2000 Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards (ISO 3740:2000)

  • EN ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms (ISO 3741:2010)

  • EN ISO 3743-1:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

  • EN ISO 3743-2:2009 Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

  • EN ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

  • EN ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

  • EN ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

  • EN ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

  • EN ISO 3758:2012 Textiles – Care labelling code using symbols (ISO 3758:2012)

  • EN ISO 3759:2011 Textiles – Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011)

  • EN ISO 376:2011 Metallic materials – Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

  • EN ISO 3766:2003 Construction drawings – Simplified representation of concrete reinforcement (ISO 3766:2003)

  • EN ISO 3766:2003/AC:2004 Construction drawings – Simplified representation of concrete reinforcement (ISO 3766:2003)

  • EN ISO 377:2013 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013)

  • EN ISO 3785:2006 Metallic materials – Designation of test specimen axes in relation to product texture (ISO 3785:2006)

  • EN ISO 3796:2001 Ships and marine technology – Clear openings for external single-leaf doors (ISO 3796:1999)

  • EN ISO 3807:2013 Gas cylinders – Acetylene cylinders – Basic requirements and type testing (ISO 3807:2013)

  • EN ISO 3815-1:2005 Zinc and zinc alloys – Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005)

  • EN ISO 3815-2:2005 Zinc and zinc alloys – Part 2: Analysis by inductively coupled plasma optical emission spectrometry (ISO 3815-2:2005)

  • EN ISO 3821:2010 Gas welding equipment – Rubber hoses for welding, cutting and allied processes (ISO 3821:2008)

  • EN ISO 3822-1:1999 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 1: Method of measurement (ISO 3822-1:1999)

  • EN ISO 3822-1:1999/A1:2008 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 1: Method of measurement – Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)

  • EN ISO 3822-2:1995 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)

  • EN ISO 3822-3:1997 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 3: Mounting and operating conditions for in-line valves and appliances

  • EN ISO 3822-3:1997/A1:2009 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 3: Mounting and operating conditions for in-line valves and appliances – Amendment 1 (ISO 3822-3:1997/Amd 1:2009)

  • EN ISO 3822-4:1997 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations – Part 4: Mounting and operating conditions for special appliances

  • EN ISO 3823-1:1998 Dental rotary instruments – Burs – Part 1: Steel and carbide burs (ISO 3823-1:1997)

  • EN ISO 3823-2:2003 Dentistry – Rotary bur instruments – Part 2: Finishing burs (ISO 3823-2:2003)

  • EN ISO 3823-2:2003/A1:2008 Dentistry – Rotary bur instruments – Part 2: Finishing burs – Amendment 1 (ISO 3823-2:2003/Amd 1:2008)

  • EN ISO 3826-1:2013 Plastics collapsible containers for human blood and blood components – Part 1: Conventional containers (ISO 3826-1:2013)

  • EN ISO 3826-2:2008 Plastics collapsible containers for human blood and blood components – Part 2: Graphical symbols for use on labels and instruction leaflets (ISO 3826-2:2008)

  • EN ISO 3826-3:2007 Plastics collapsible containers for human blood and blood components – Part 3: Blood bag systems with integrated features (ISO 3826-3:2006)

  • EN ISO 3830:1995 Petroleum products – Determination of lead content of gasoline – Iodine monochloride method (ISO 3830:1993)

  • EN ISO 3834-1:2005 Quality requirements for fusion welding of metallic materials – Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005)

  • EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials – Part 2: Comprehensive quality requirements (ISO 3834-2:2005)

  • EN ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials – Part 3: Standard quality requirements (ISO 3834-3:2005)

  • EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials – Part 4: Elementary quality requirements (ISO 3834-4:2005)

  • EN ISO 3834-5:2005 Quality requirements for fusion welding of metallic materials – Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2005)

  • EN ISO 3834-5:2005/AC:2008 Quality requirements for fusion welding of metallic materials – Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2005/Cor 1:2007)

  • EN ISO 3838:2004 Crude petroleum and liquid or solid petroleum products – Determination of density or relative density – Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods (ISO 3838:2004)

  • EN ISO 385:2005 Laboratory glassware – Burettes (ISO 385:2005)

  • EN ISO 3861:2008 Rubber hoses for sand and grit blasting – Specification (ISO 3861:2005)

  • EN ISO 3868:1994 Metallic and other non-organic coatings – Measurement of coating thicknesses – Fizeau multiple-beam interferometry method (ISO 3868:1976)

  • EN ISO 3882:2003 Metallic and other inorganic coatings – Review of methods of measurement of thickness (ISO 3882:2003)

  • EN ISO 3887:2003 Steels – Determination of depth of decarburization (ISO 3887:2003)

  • EN ISO 389-1:2000 Acoustics – Reference zero for the calibration of audiometric equipment – Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:1998)

  • EN ISO 389-2:1996 Acoustics – Reference zero for the calibration of audiometric equipment – Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones (ISO 389-2:1994)

  • EN ISO 3892:2001 Conversion coatings on metallic materials – Determination of coating mass per unit area – Gravimetric methods (ISO 3892:2000)

  • EN ISO 389-3:1998 Acoustics – Reference zero for the calibration of audiometric equipment – Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators (ISO 389-3:1994)

  • EN ISO 389-4:1998 Acoustics – Reference zero for the calibration of audiometric equipment – Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994)

  • EN ISO 389-5:2006 Acoustics – Reference zero for the calibration of audiometric equipment – Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO 389-5:2006)

  • EN ISO 389-6:2007 Acoustics – Reference zero for the calibration of audiometric equipment – Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)

  • EN ISO 389-7:2005 Acoustics – Reference zero for the calibration of audiometric equipment – Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2005)

  • EN ISO 389-8:2004 Acoustics – Reference zero for the calibration of audiometric equipment – Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO 389-8:2004)

  • EN ISO 389-9:2009 Acoustics – Reference zero for the calibration of audiometric equipment – Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)

  • EN ISO 3907:2009 Hardmetals – Determination of total carbon – Gravimetric method (ISO 3907:2009)

  • EN ISO 3908:2009 Hardmetals – Determination of insoluble (free) carbon – Gravimetric method (ISO 3908:2009)

  • EN ISO 3915:1999 Plastics – Measurement of resistivity of conductive plastics (ISO 3915:1981)

  • EN ISO 3923-1:2010 Metallic powders – Determination of apparent density – Part 1: Funnel method (ISO 3923-1:2008)

  • EN ISO 3924:2010 Petroleum products – Determination of boiling range distribution – Gas chromatography method (ISO 3924:2010)

  • EN ISO 3927:2011 Metallic powders, excluding powders for hardmetals – Determination of compressibility in uniaxial compression (ISO 3927:2011)

  • EN ISO 3928:2006 Sintered metal materials, excluding hardmetals – Fatigue test pieces (ISO 3928:1999)

  • EN ISO 3946:1994 Starches and derived products – Determination of total phosphorus content – Spectrophotometric method (ISO 3946:1982)

  • EN ISO 3947:1994 Starches, native or modified – Determination of total fat content (ISO 3947:1977)

  • EN ISO 3950:2009 Dentistry – Designation system for teeth and areas of the oral cavity (ISO 3950:2009)

  • EN ISO 3952-1:1994 Kinematic diagrams – Graphical symbols – Part 1 (ISO 3952-1:1981)

  • EN ISO 3952-1:1994/A1:2004 Kinematic diagrams – Graphical symbols – Part 1: Amendment 1 (ISO 3952-1:1981/Amd 1:2002)

  • EN ISO 3952-2:1994 Kinematic diagrams – Graphical symbols – Part 2 (ISO 3952-2:1981)

  • EN ISO 3952-3:1994 Kinematic diagrams – Graphical symbols – Part 3 (ISO 3952-3:1979)

  • EN ISO 3952-4:1997 Kinematic diagrams – Graphical symbols – Part 4 (ISO 3952-4:1984)

  • EN ISO 3953:2011 Metallic powders – Determination of tap density (ISO 3953:2011)

  • EN ISO 3954:2007 Powders for powder metallurgical purposes – Sampling (ISO 3954:2007)

  • EN ISO 3960:2010 Animal and vegetable fats and oils – Determination of peroxide value – Iodometric (visual) endpoint determination (ISO 3960:2007, corrected version 2009-05-15)

  • EN ISO 3961:2013 Animal and vegetable fats and oils – Determination of iodine value (ISO 3961:2013)

  • EN ISO 3977-5:2003 Gas turbines – Procurement – Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)

  • EN ISO 3977-5:2003/AC:2007 Gas turbines – Procurement – Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)

  • EN ISO 3993:1995 Liquefied petroleum gas and light hydrocarbons – Determination of density or relative density – Pressure hydrometer method (ISO 3993:1984)

  • EN ISO 3994:2011 Plastics hoses – Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification (ISO 3994:2007)

  • EN ISO 4007:2012 Personal protective equipment – Eye and face protection – Vocabulary (ISO 4007:2012)

  • EN ISO 4014:2011 Hexagon head bolts – Product grades A and B (ISO 4014:2011)

  • EN ISO 4016:2011 Hexagon head bolts – Product grade C (ISO 4016:2011)

  • EN ISO 4017:2011 Hexagon head screws – Product grades A and B (ISO 4017:2011)

  • EN ISO 4018:2011 Hexagon head screws – Product grade C (ISO 4018:2011)

  • EN ISO 4022:2006 Permeable sintered metal materials – Determination of fluid permeability (ISO 4022:1987)

  • EN ISO 4023:2009 Rubber hoses and hose assemblies for steam – Test methods (ISO 4023:2009)

  • EN ISO 4026:2003 Hexagon socket set screws with flat point (ISO 4026:2003)

  • EN ISO 4027:2003 Hexagon socket set screws with cone point (ISO 4027:2003)

  • EN ISO 4028:2003 Hexagon socket set screws with dog point (ISO 4028:2003)

  • EN ISO 4029:2003 Hexagon socket set screws with cup point (ISO 4029:2003)

  • EN ISO 4032:2012 Hexagon regular nuts (style 1) – Product grades A and B (ISO 4032:2012)

  • EN ISO 4033:2012 Hexagon high nuts (style 2) – Product grades A and B (ISO 4033:2012)

  • EN ISO 4034:2012 Hexagon regular nuts (style 1) – Product grade C (ISO 4034:2012)

  • EN ISO 4034:2012/AC:2013 Hexagon regular nuts (style 1) – Product grade C – Technical Corrigendum 1 (ISO 4034:2012/Cor 1:2013)

  • EN ISO 4035:2012 Hexagon thin nuts chamfered (style 0) – Product grades A and B (ISO 4035:2012)

  • EN ISO 4036:2012 Hexagon thin nuts unchamfered (style 0) – Product grade B (ISO 4036:2012)

  • EN ISO 4042:1999 Fasteners – Electroplated coatings (ISO 4042:1999)

  • EN ISO 4044:2008 Leather – Chemical tests – Preparation of chemical test samples (ISO 4044:2008)

  • EN ISO 4045:2008 Leather – Chemical tests – Determination of pH (ISO 4045:2008)

  • EN ISO 4047:1998 Leather – Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977)

  • EN ISO 4048:2008 Leather – Chemical tests – Determination of matter soluble in dichloromethane and free fatty acid content (ISO 4048:2008)

  • EN ISO 4049:2009 Dentistry – Polymer-based restorative materials (ISO 4049:2009)

  • EN ISO 4063:2010 Welding and allied processes – Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)

  • EN ISO 407:2004 Small medical gas cylinders – Pin-index yoke-type valve connections (ISO 407:2004)

  • EN ISO 4073:2009 Dentistry – Information system on the location of dental equipment in the working area of the oral health care provider (ISO 4073:2009)

  • EN ISO 4074:2002 Natural latex rubber condoms – Requirements and test methods (ISO 4074:2002)

  • EN ISO 4074:2002/AC:2008 Natural latex rubber condoms – Requirements and test methods (ISO 4074:2002/Cor 2:2008)

  • EN ISO 4080:2009 Rubber and plastics hoses and hose assemblies – Determination of permeability to gas (ISO 4080:2009)

  • EN ISO 4090:2004 Photography – Medical radiographic cassettes/screens/films and hard-copy imaging films – Dimensions and specifications (ISO 4090:2004)

  • EN ISO 4098:2006 Leather – Chemical tests – Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter (ISO 4098:2006)

  • EN ISO 4119:1996 Pulps – Determination of stock concentration (ISO 4119:1995)

  • EN ISO 4120:2007 Sensory analysis – Methodology – Triangle test (ISO 4120:2004)

  • EN ISO 4126-1:2013 Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)

  • EN ISO 4126-2:2003 Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices (ISO 4126-2:2003)

  • EN ISO 4126-2:2003/AC:2006 Safety devices for protection against excessive pressure – Part 2: Bursting disc safety devices (ISO 4126-2:2003)

  • EN ISO 4126-3:2006 Safety devices for protection against excessive pressure – Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)

  • EN ISO 4126-4:2013 Safety devices for protection against excessive pressure – Part 4: Pilot-operated safety valves (ISO 4126-4:2013)

  • EN ISO 4126-5:2013 Safety devices for protection against excessive pressure – Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)

  • EN ISO 4126-6:2003 Safety devices for protection against excessive pressure – Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003)

  • EN ISO 4126-6:2003/AC:2006 Safety devices for protection against excessive pressure – Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003)

  • EN ISO 4126-7:2013 Safety devices for protection against excessive pressure – Part 7: Common data (ISO 4126-7:2013)

  • EN ISO 4135:2001 Anaesthetic and respiratory equipment – Vocabulary (ISO 4135:2001)

  • EN ISO 4136:2012 Destructive tests on welds in metallic materials – Transverse tensile test (ISO 4136:2012)

  • EN ISO 4142:2002 Laboratory glassware – Test tubes (ISO 4142:2002)

  • EN ISO 4157-1:1998 Construction drawings – Designation systems – Part 1: Buildings and parts of buildings (ISO 4157-1:1998)

  • EN ISO 4157-2:1998 Construction drawings – Designation systems – Part 2: Room names and numbers (ISO 4157-2:1998)

  • EN ISO 4157-3:1998 Construction drawings – Designation systems – Part 3: Room identifiers (ISO 4157-3:1998)

  • EN ISO 4165:2003 Road vehicles – Electrical connections – Double-pole connection (ISO 4165:2001)

  • EN ISO 4167:2006 Polyolefin agricultural twines (ISO 4167:2006)

  • EN ISO 4172:1996 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures (ISO 4172:1991)

  • EN ISO 4180:2010 Packaging – Complete, filled transport packages – General rules for the compilation of performance test schedules (ISO 4180:2009)

  • EN ISO 4254-10:2009 Agricultural machinery – Safety – Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

  • EN ISO 4254-10:2009/AC:2010 Agricultural machinery – Safety – Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

  • EN ISO 4254-12:2012 Agricultural machinery – Safety – Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)

  • EN ISO 4254-5:2009 Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

  • EN ISO 4254-5:2009/AC:2011 Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5:2008)

  • EN ISO 4254-7:2009 Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

  • EN ISO 4254-7:2009/AC:2010 Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008)

  • EN ISO 4256:1998 Liquefied petroleum gases – Determination of gauge pressure – LPG method (ISO 4256:1996)

  • EN ISO 4257:2001 Liquefied petroleum gases – Method of sampling (ISO 4257:2001)

  • EN ISO 4257:2001/AC:2007 Liquefied petroleum gases – Method of sampling (ISO 4257:2001/Cor.1:2007)

  • EN ISO 4259:2006 Petroleum products – Determination and application of precision data in relation to methods of test (ISO 4259:2006)

  • EN ISO 4263-1:2004 Petroleum and related products – Determination of the ageing behaviour of inhibited oils and fluids – TOST test – Part 1: Procedure for mineral oils (ISO 4263-1:2003)

  • EN ISO 4263-2:2003 Petroleum and related products – Determination of the ageing behaviour of inhibited oils and fluids – TOST test – Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)

  • EN ISO 4263-3:2010 Petroleum and related products – Determination of the ageing behaviour of inhibited oils and fluids using the TOST test – Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2010)

  • EN ISO 4263-4:2006 Petroleum and related products – Determination of the ageing behaviour of inhibited oils and fluids – TOST test – Part 4: Procedure for industrial gear oils (ISO 4263-4:2006)

  • EN ISO 4264:2007 Petroleum products – Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007)

  • EN ISO 4264:2007/A1:2013 Petroleum products – Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:2007/Amd 1:2013)

  • EN ISO 4267-2:1995 Petroleum and liquid petroleum products – Calculation of oil quantities – Part 2: Dynamic measurement (ISO 4267-2:1988)

  • EN ISO 4404-1:2012 Petroleum and related products – Determination of the corrosion resistance of fire-resistant hydraulic fluids – Part 1: Water-containing fluids (ISO 4404-1:2012)

  • EN ISO 4404-2:2010 Petroleum and related products – Determination of the corrosion resistance of fire-resistant hydraulic fluids – Part 2: Non-aqueous fluids (ISO 4404-2:2010)

  • EN ISO 4491-2:1999 Metallic powders – Determination of oxygen content by reduction methods – Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997)

  • EN ISO 4491-3:2006 Metallic powders – Determination of oxygen content by reduction methods – Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)

  • EN ISO 4491-4:2013 Metallic powders – Determination of oxygen content by reduction methods – Part 4: Total oxygen by reduction-extraction (ISO 4491-4:2013)

  • EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided – Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000)

  • EN ISO 4516:2002 Metallic and other inorganic coatings – Vickers and Knoop microhardness tests (ISO 4516:2002)

  • EN ISO 4518:1995 Metallic coatings – Measurement of coating thickness – Profilometric method (ISO 4518:1980)

  • EN ISO 4521:2008 Metallic and other inorganic coatings – Electrodeposited silver and silver alloy coatings for engineering purposes – Specification and test methods (ISO 4521:2008)

  • EN ISO 4524-3:1995 Metallic coatings – Test methods for electrodeposited gold and gold alloy coatings – Part 3: Electrographic tests for porosity (ISO 4524-3:1985)

  • EN ISO 4524-6:1994 Metallic coatings – Test methods for electrodeposited gold aid gold alloy coatings – Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)

  • EN ISO 4526:2004 Metallic coatings – Electroplated coatings of nickel for engineering purposes (ISO 4526:2004)

  • EN ISO 4527:2003 Metallic coatings – Autocatalytic (electroless) nickel-phosphorus alloy coatings – Specification and test methods (ISO 4527:2003)

  • EN ISO 4528:2009 Vitreous and porcelain enamel finishes – Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2000)

  • EN ISO 4534:2010 Vitreous and porcelain enamels – Determination of fluidity behaviour – Fusion flow test (ISO 4534:2010)

  • EN ISO 4536:1995 Metallic and non-organic coatings on metallic substrates – Saline droplets corrosion test (SD test) (ISO 4536:1985)

  • EN ISO 4538:1995 Metallic coatings – Thioacetamide corrosion test (TAA test) (ISO 4538:1978)

  • EN ISO 4541:1994 Metallic and other non-organic coatings – Corrodkote corrosion test (CORR test) (ISO 4541:1978)

  • EN ISO 4543:1994 Metallic and other non-organic coatings – General rules for corrosion tests applicable for storage conditions (ISO 4543:1981)

  • EN ISO 4545-1:2005 Metallic materials – Knoop hardness test – Part 1: Test method (ISO 4545-1:2005)

  • EN ISO 4545-2:2005 Metallic materials – Knoop hardness test – Part 2: Verification and calibration of testing machines (ISO 4545-2:2005)

  • EN ISO 4545-3:2005 Metallic materials – Knoop hardness test – Part 3: Calibration of reference blocks (ISO 4545-3:2005)

  • EN ISO 4545-4:2005 Metallic materials – Knoop hardness test – Part 4: Table of hardness values (ISO 4545-4:2005)

  • EN ISO 4566:1995 Small craft with inboard engine – Propeller shaft ends and bosses with 1 : 10 taper (ISO 4566:1992)

  • EN ISO 4577:1999 Plastics – Polypropylene and propylene-copolymers – Determination of thermal oxidative stability in air – Oven method (ISO 4577:1983)

  • EN ISO 4589-1:1999 Plastics – Determination of burning behaviour by oxygen index – Part 1: Guidance (ISO 4589-1:1996)

  • EN ISO 4589-2:1999 Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient-temperature test (ISO 4589-2:1996)

  • EN ISO 4589-2:1999/A1:2006 Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient-temperature test (ISO 4589-2:1996/Amd 1:2005)

  • EN ISO 4589-3:1996 Plastics – Determination of burning behaviour by oxygen index – Part 3: Elevated-temperature test (ISO 4589-3:1996)

  • EN ISO 4590:2003 Rigid cellular plastics – Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)

  • EN ISO 4597-1:2008 Plastics – Hardeners and accelerators for epoxy resins – Part 1: Designation (ISO 4597-1:2005)

  • EN ISO 4608:1998 Plastics – Homopolymer and copolymer resins of vinyl chloride for general use – Determination of plasticizer absorption at room temperature (ISO 4608:1998)

  • EN ISO 4610:2001 Plastics – Vinyl chloride homopolymer and copolymer resins – Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)

  • EN ISO 4611:2010 Plastics – Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)

  • EN ISO 4612:1999 Plastics – Preparation of PVC pastes for test purposes – Planetary-mixer method (ISO 4612:1999)

  • EN ISO 4613-1:1999 Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 1: Designation and specification (ISO 4613-1:1993)

  • EN ISO 4613-2:1995 Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995)

  • EN ISO 4613-2:1995/A1:2004 Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties – Amendment 1 (ISO 4613-2:1995/Amd 1:2004)

  • EN ISO 4614:1999 Plastics – Melamine-formaldehyde mouldings – Determination of extractable formaldehyde (ISO 4614:1977)

  • EN ISO 4615:1999 Plastics – Unsaturated polyesters and epoxide resins – Determination of total chlorine content (ISO 4615:1979)

  • EN ISO 4618:2006 Paints and varnishes – Terms and definitions (ISO 4618:2006)

    • |1| -|2|- |3|

top

Company Info :

퍼포먼스네트워크(주)

강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
Tel : 02-980-9800(대표전화)
E-Mail: info @ anytest.co.kr (Technical,시험인증)

ALT_TEXT
QR Code Generator
  • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

    [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

  • MIL-Spec Documents2013년 December 11일 - 6:40 pm

    MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

  • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

    아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

  • IP Code2016년 April 12일 - 6:42 pm

    IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

  • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

    ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

November 2024
M T W T F S S
« Aug    
 123
45678910
11121314151617
18192021222324
252627282930  
© Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.