EOTA

EOTA :European Organization for Technical Assessment

유럽 기술 승인 가이드라인은 (ETAGs)는 건축자재 지침 (89/106/EEC CPD)의 CE Marking에 적용되며 EOTA에 의해 작성됩니다.

아래는 기술승인 문서[ Technical Approval Guidelines (ETAGs)] 입니다.

ETAG 001 :

Metal Anchors for Use in Concrete
Part 1: General

Metal Anchors for Use in Concrete
Part 2: Torque-Controlled Expansion Anchors

Metal Anchors for Use in Concrete
Part 3: Undercut Anchors

Metal Anchors for Use in Concrete
Part 4: Deformation-Controlled Expansion Anchors

Metal Anchors for Use in Concrete
Part 5: Bonded Anchors

Metal Anchors for Use in Concrete
Annex A: Details of tests
Annex B: Tests for admissible service conditions – Detailed Information

Metal Anchors for Use in Concrete
Annex C: Design Methods for Anchorages

Metal Anchors for Use in Concrete
Annex E: Assessment of Metal Anchors under Seismic Action

Metal Anchors for Use in Concrete
Part 6 : Anchors for multiple use for non-structural applications

ETAG 002 :

Structural Sealant Glazing Systems
Part 1: Supported and Unsupported Systems

Structural Sealant Glazing Systems
Part 2 : Coated Aluminium Systems

Structural Sealant Glazing Systems
Part 3 : Systems incorporating profiles with thermal barrier

ETAG 003 :

Internal Partition Kits

ETAG 004 :

External Thermal Insulation Composite Systems with Rendering

ETAG 005 :

Liquid Applied Roof Waterproofing Kits
Part 1: General
Part 2: Specific stipulations for Kits bases on Polymer Modified Bitumen
Part 3: Specific stipulations for Kits based on Glass Reinforced Resilient Unsaturated Polyester Resin
Part 4: Specific stipulations for Kits on Flexible Unsaturated Polyester
Part 5: Specific stipulations for Kits based on Hot Applied Polymer Modified Bitumen
Part 6: Specific stipulations for Kits based on Polyethurane
Part 7: Specific stipulations for Kits based on Bitumen Emulsions and Solutions
Part 8: Specific stipulations for Kits based on Water Dispersable Polymers

ETAG 006 :

Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes

ETAG 007 :

Timber Building Kits

ETAG 008 :

Prefabricated Stair Kits

*) Version of June 2013 not endorsed by EC

ETAG 009 :

Non load-bearing permanent shuttering Kits/Systems based on Hollow Blocks or Panels of insulating materials or concrete

ETAG 010 :

Self supporting translucent Roof Kits

ETAG 011 :

Light Composite Wood-based Beams and Columns

ETAG 012* :

*) merged with ETAG 007_November 2012

ETAG 013 :

Post Tensioning Kits for prestressing of Structures

*) Version of February 2013 not endorsed by EC

ETAG 014 :

Plastic Anchors for ETICS

ETAG 015 :

Three Dimensional Nailing Plates

ETAG 016 :

Composite Light Weight Panels
Part 1: General

*) ETAG 016 is not applicable for the assessment of Kits/Systems to which the Panel might belong

Composite Light Weight Panels
Part 2: Specific aspects related to self-supporting Composite Leightweight Panels for use in Roofs

Composite Light Weight Panels
Part 3: Specific aspects related to self-supporting Composite Lightweight Panels for use in Externql Walls and Claddings

Composite Light Weight Panels
Part 4: Specific aspects related to sel-supporting Composite Leightweight Panels for use in Internal Walls and Ceilings

ETAG 017 :

Veture Kits

ETAG 018 :

Fire protective products
Part 1: General

Fire protective products
Part 2: Reactive Coatings for Fire Protection of Steel Elements

Fire protective products
Part 3: Renderings and Rendering Kits intended for Fire Resisting Applications

Fire protective products
Part 4: Fire protective Board, Slab and Mat products and Kits

ETAG 019 :

Pre-fabricated wood-based loadbearing stressed Skin Panels

ETAG 020 :

Plastic Anchors
Part 1: General
Part 2: for use in normal weight concrete
Part 3: for use in solid masonry materials
Part 4: for use in hollow or perforated masonry
Part 5: for use in autoclaved aerated concret과
Annex A: Details of tests
Annex B: Recommendations for tests to be carried out on construction works
Annex C: Design Methods for Anchorages

ETAG 021 :

Cold Storage Premises Kits
Part 1: Cold Storage Room Kits + Annexes
Part 2: Cold Storage Building Envelope and Building Kits

ETAG 022 :

Watertight Covering Kits for Wet Room floors and or walls
Part 1: Liquid Applied Coverings with or without wearing surface
Part 2: Kits based on flexible Sheets
Part 3: Kits based on inherently watertight Boards

Watertight Covering Kits for Wet Room floors and or walls
Annex A: Water tightness around penetrations and other details in Wet Room floors with flexible substrat
Annex B: Impermeability when subject to movement of the underlaying material – Tensile and shear loading
Annex C: Test for scratching resistance
Annex D: Waterproofing in liquid form: applicability and thickness of finished membrane
Annex E: Walls in Wet Rooms: Water tightness and resistance to water and moisture of walls with flexible substrate
Annex F: Water tightness around penetrations and other details in Wet Room walls with flexible substrate
Annex G: Water tightness around penetrations and other details in Wet Room walls and floors with rigid substrates
Annex H: Paint systems for walls without wearing surface
Annex I: Mounting and fixing rules for reaction-to-fire testing

ETAG 023 :

Prefabricated Building Units

ETAG 024 :

Concrete Frame Building Kits

ETAG 025 :

Metal Frame Building Kits

ETAG 026 :

Fire Stopping and Fire Sealing Products

Part 1: General

Fire Stopping and Fire Sealing Products
Part 2: Penetration Seals

Fire Stopping and Fire Sealing Products
Part 3 : Linear Joint and Gap Seals

Fire Stopping and Fire Sealing Products
Part 4: Reactive and Mechanical Air Transfer Grilles (Fire resistant and Cold Smoke Control Fire Resistant Types)

Fire Stopping and Fire Sealing Products
Part 5 : Cavity Barriers

ETAG 027 :

Falling Rock Protection Kits

ETAG 028 :

Fire retardant products

ETAG 029 :

Metal Injection Anchors for use in Masonry
Annex A: Details of tests
Annex B: Recommendations for tests to be carried out on construction wsork

Annex C: Design methods for Anchorages

ETAG 030 :

Dowels for structural joints
Part 1: General
Part 2: Seismic Action
Part 3: Cyclic Loading

ETAG 031 :

Inverted Roofs Insulation Kits
Part 1: General
Part 2: Insulation with protective Finish

ETAG 032 :

Expansion Joints for Road Bridges
Part 1: General
Part 2: Buried Expansion Joints
Part 3: Flexible plug Expansion Joints
Part 4: Nosing Expansion Joints
Part 5: Mat Expansion Joints
Part 6: Cantilever Expansion Joints
Part 7: Supported Expansion Joints
Part 8: Modular Expansion Joints

ETAG 033 :

Liquid applied Bridge Deck waterproofing Kits

ETAG 034 :

Cladding Kits
Part 1: Ventilated Cladding Kits comprising Cladding components and associated fixings
Part 2: Cladding Kits comprising Cladding components, associated fixings, subframe and possible insulation layer

ETAG 035 :

Ultra thin layer Asphalt Concrete

[출처 : www.eota.eu]