STD-EN 9XXXX

IN 900:2007 Chemicals used for treatment of water intended for human consumption – Calcium hypochlorite

IN 901:2013 Chemicals used for treatment of water intended for human consumption – Sodium hypochlorite

IN 902:2009 Chemicals used for treatment of water intended for human consumption – Hydrogen peroxide

IN 903:1993 Water quality – Determination of anionic surfactants by measurement of the methylene blue index MBAS (ISO 7875-1:1984 수정)

IN 908:1999+A1:2009 Agricultural and forestry machinery – Reel machines for irrigation – 안전

IN 909:1998+A1:2009 Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – 안전

IN 9100:2009 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations

IN 9101:2011 Quality Management Systems – Audit Requirements for Aviation, Space, and Defence Organizations

IN 9104-001:2013 Aerospace series – Quality management systems – Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs

IN 9104-003:2010 Aerospace series – Quality management systems – Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification

IN 911:1995 Plastics piping systems – Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping – Test method for leaktightness under external hydrostatic pressure

IN 9110:2010 Quality Management Systems – Requirements for Aviation Maintenance Organizations

IN 9115:2013 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations – Deliverable Software (Supplement to EN 9100)

IN 912:2011 Timber fasteners – Specifications for connectors for timbers

IN 9120:2010 Quality Management Systems – Requirements for Aviation, Space and Defence Distributors

IN 9121:2009 Aerospace series – Quality management systems – Assessment applicable to stockist distributors (based on ISO 9001:2000)

IN 913:2008 Gymnastic equipment – General safety requirements and test methods

IN 9137:2012 Quality management systems – Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System

IN 914:2008 Gymnastic equipment – Parallel bars and combination asymmetric/parallel bars – Requirements and test methods including safety

IN 915:2008 Gymnastic equipment – Asymmetric bars – Requirements and test methods including safety

IN 916:2003 Gymnastic equipment – Vaulting boxes – Requirements and test methods including safety

IN 917:1997 Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness

IN 920:2000 Paper and board intended to come into contact with foodstuffs – Determination of dry matter content in an aqueous extract

IN 923:2005+A1:2008 Adhesives – 용어 및 정의

IN 924:2003 Adhesives – Solvent-borne and solvent-free adhesives – Determination of flashpoint

IN 926-1:2006 Paragliding equipment – Paragliders – Part 1: Requirements and test methods for structural strength

IN 926-2:2005 Paragliding equipment – Paragliders – Part 2: Requirements and test methods for classifying flight safety characteristics

IN 927-1:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 1: Classification and selection

IN 927-2:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 2: Performance specification

IN 927-3:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 3: Natural weathering test

IN 927-5:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 5: Assessment of the liquid water permeability

IN 927-6:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

IN 929:1993 Inland navigation vessels – Push-tows – Mounting attachment for demountable signal masts

IN 930:1997+A2:2009 신발류, leather and imitation leather goods manufacturing machines – Roughing, 수색, polishing and trimming machines – 안전 요구 사항

IN 9300-003:2012 Aerospace series – LOTAR – Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 003: Fundamentals and concepts

IN 9300-004:2013 Aerospace series – LOTAR – Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 004: Description methods

IN 9300-011:2013 Aerospace series – LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 011: Reference process description “Data preparation”

IN 9300-012:2013 Aerospace series – LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 012: Reference process description ”Ingest”

IN 9300-013:2013 Aerospace series – LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 013: Reference process description ”Archival Storage”

IN 9300-014:2013 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 014: Reference process description ”Retrieval”

IN 9300-015:2013 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 015: Reference process description ”Removal”

IN 931:1997+A2:2009 Footwear manufacturing machines – Lasting machines – 안전 요구 사항

IN 932-1:1996 Tests for general properties of aggregates – Part 1: Methods for sampling

IN 932-2:1999 Tests for general properties of aggregates – Part 2: Methods for reducing laboratory samples

IN 932-3:1996 Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description

IN 932-3:1996/A1:2003 Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description

IN 932-5:2012 Tests for general properties of aggregates – Part 5: 공용 설비 및 교정

IN 932-6:1999 Tests for general properties of aggregates – Part 6: Definitions of repeatability and reproducibility

IN 933-1:2012 Tests for geometrical properties of aggregates – Part 1: 입도 분포의 측정 – Sieving method

IN 933-10:2009 Tests for geometrical properties of aggregates – Part 10: Assessment of fines – Grading of filler aggregates (air jet sieving)

IN 933-11:2009 Tests for geometrical properties of aggregates – Part 11: Classification test for the constituents of coarse recycled aggregate

IN 933-11:2009/AC:2009 Tests for geometrical properties of aggregates – Part 11: Classification test for the constituents of coarse recycled aggregate

IN 933-2:1995 Tests for geometrical properties of aggregates – Part 2: 입도 분포의 측정 – Test sieves, nominal size of apertures

IN 933-3:2012 Tests for geometrical properties of aggregates – Part 3: Determination of particle shape – Flakiness index

IN 933-4:2008 Tests for geometrical properties of aggregates – Part 4: Determination of particle shape – Shape index

IN 933-5:1998 Tests for geometrical properties of aggregates – Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles

IN 933-5:1998/A1:2004 Tests for geometrical properties of aggregates – Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles

IN 933-6:2001 Tests for geometrical properties of aggregates – Part 6: Assessment of surface characteristics – Flow coefficient of aggregates

IN 933-6:2001/AC:2004 Tests for geometrical properties of aggregates – Part 6: Assessment of surface characteristics – Flow coefficient of aggregates

IN 933-7:1998 Tests for geometrical properties of aggregates – Part 7: Determination of shell content – Percentage of shells in coarse aggregates

IN 933-8:2012 Tests for geometrical properties of aggregates – Part 8: Assessment of fines – Sand equivalent test

IN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates – Part 9: Assessment of fines – Methylene blue test

IN 934-1:2008 콘크리트 용 혼화제, 박격포와 그라우트 – Part 1: 일반 요구 사항

IN 934-2:2009+A1:2012 콘크리트 용 혼화제, 박격포와 그라우트 – Part 2: Concrete admixtures – 정의, 요구 사항, 적합성, 마킹 및 라벨링

IN 934-3:2009+A1:2012 콘크리트 용 혼화제, 박격포와 그라우트 – Part 3: Admixtures for masonry mortar – 정의, 요구 사항, 적합성 마킹 및 라벨링

IN 934-4:2009 콘크리트 용 혼화제, 박격포와 그라우트 – Part 4: Admixtures for grout for prestressing tendons – 정의, 요구 사항, 적합성, 마킹 및 라벨링

IN 934-5:2007 콘크리트 용 혼화제, 박격포와 그라우트 – Part 5: Admixtures for sprayed concrete – 정의, 요구 사항, 적합성, 마킹 및 라벨링

IN 934-6:2001 콘크리트 용 혼화제, 박격포와 그라우트 – Part 6: 샘플링, conformity control and evaluation of conformity

IN 934-6:2001/A1:2005 콘크리트 용 혼화제, 박격포와 그라우트 – Part 6: 샘플링, conformity control and evaluation of conformity

IN 935:2004 Chemicals used for treatment of water intended for human consumption – Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric)

IN 936:2006 Chemicals used for treatment of water intended for human consumption – Carbon dioxide

IN 937:2009 Chemicals used for treatment of water intended for human consumption – Chlorine

IN 938:2009 Chemicals used for treatment of water intended for human consumption – Sodium chlorite

IN 939:2009 Chemicals used for treatment of water intended for human consumption – Hydrochloric acid

IN 940:2009+A1:2012 Safety of woodworking machines – Combined woodworking machines

IN 941:1995 Aluminium and aluminium alloys – Circle and circle stock for general application – Specifications

IN 942:2007 Timber in joinery – 일반 요구 사항

IN 943-1:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 1: Performance requirements for ventilated and non-ventilated “gas-tight” (Type 1) 과 “non-gas-tight” (Type 2) chemical protective suits

IN 943-1:2002/AC:2005 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 1: Performance requirements for ventilated and non-ventilated ‘gas-tight’ (Type 1) and ‘non-gas-tight’ (Type 2) chemical protective suits

IN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 2: Performance requirements for “gas-tight” (Type 1) chemical protective suits for emergency teams (ET)

IN 947:1998 Hinged or pivoted doors – Determination of the resistance to vertical load

IN 948:1999 Hinged or pivoted doors – Determination of the resistance to static torsion

IN 949:1998 Windows and curtain walling, 문, blinds and shutters – Determination of the resistance to soft and heavy body impact for doors

IN 950:1999 Door leaves – Determination of the resistance to hard body impact

IN 951:1998 Door leaves – Method for measurement of height, width, thickness and squareness

IN 952:1999 Door leaves – General and local flatness – Measurement method

IN 953:1997+A1:2009 Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards

IN 957-10:2005 Stationary training equipment – Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods

IN 957-2:2003 Stationary training equipment – Part 2: Strength training equipment, additional specific safety requirements and test methods

IN 957-4:2006+A1:2010 Stationary training equipment – Part 4: Strength training benches, additional specific safety requirements and test methods

IN 957-5:2009 Stationary training equipment – Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods

IN 957-6:2010 Stationary training equipment – Part 6: Treadmills, additional specific safety requirements and test methods

IN 957-7:1998 Stationary training equipment – Part 7: Rowing machines, additional specific safety requirements and test methods

IN 957-8:1998 Stationary training equipment – Part 8: Steppers, stairclimbers and climbers – Additional specific safety requirements and test methods

IN 957-9:2003 Stationary training equipment – Part 9: Elliptical trainers, additional specific safety requirements and test methods

IN 958:2006+A1:2010 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – 안전 요구 사항 및 시험 방법

IN 959:2007 Mountaineering equipment – Rock anchors – 안전 요구 사항 및 시험 방법

IN 960:2006 Headforms for use in the testing of protective helmets

IN 966:2012+A1:2012 Helmets for airborne sports

IN 969:2009 장시성 (강서성) 티타늄, 피팅, accessories and their joints for gas pipelines – Requirements and test methods

IN 972:1998+A1:2010 Tannery machines – Reciprocating roller machines – 안전 요구 사항

IN 972:1998+A1:2010/AC:2011 Tannery machines – Reciprocating roller machines – 안전 요구 사항

IN 973:2009 Chemicals used for treatment of water intended for human consumption – Sodium chloride for regeneration of ion exchangers

IN 974:2003 Chemicals used for treatment of water intended for human consumption – Phosphoric acid

IN 975-1:2009 Sawn timber – Appearance grading of hardwoods – Part 1: Oak and beech

IN 975-1:2009/AC:2010 Sawn timber – Appearance grading of hardwoods – Part 1: Oak and beech

IN 975-2:2004 Sawn timber – Appearance grading of hardwoods – Part 2: Poplars

IN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) – Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels – Part 1: Requirements and test methods for single wall tanks

IN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) – Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels – Part 2: Transport, handling, storage and installation of single wall tanks

IN 977:1997 Underground tanks of glass-reinforced plastics (GRP) – Method for one side exposure to fluids

IN 978:1997 Underground tanks of glass-reinforced plastics (GRP) – Determination of factor alpha and factor beta

IN 981:1996+A1:2008 Safety of machinery – System of auditory and visual danger and information signals

IN 984:2001 Textile floor coverings – Determination of the mass per unit area of the use surface of needled floor coverings

IN 985:2001 Textile floor coverings – Castor chair test

IN 986:2005 Textile floor coverings – Tiles – Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane

IN 988:1996 Zinc and zinc alloys – Specifications for rolled flat products for building

IN 989:1995 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the “Push-Out” test

IN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure

IN 991:1995 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure

IN 992:1995 Determination of the dry density of lightweight aggregate concrete with open structure

IN 993-1:1995 Methods of test for dense shaped refractory products – Part 1: Determination of bulk density, apparent porosity and true porosity

IN 993-10:1997 Methods of test for dense shaped refractory products – Part 10: Determination of permanent change in dimensions on heating

IN 993-11:2007 Methods of test for dense shaped refractory products – Part 11: Determination of resistance to thermal shock

IN 993-12:1997 Methods of test for dense shaped refractory products – Part 12: Determination of pyrometric cone equivalent (refractoriness)

IN 993-13:1995 Methods of test for dense shaped refractory products – Part 13: Specification for pyrometric reference cones for laboratory use

IN 993-15:2005 Methods of test for dense shaped refractory products – Determination of thermal conductivity by the hot-wire (parallel) method

IN 993-16:1995 Dense shaped refractory products – Methods of test – Part 16: Determination of resistance to sulphuric acid

IN 993-17:1998 Methods of test for dense shaped refractory products – Part 17: Determination of bulk density of granular materials by the mercury method with vacuum

IN 993-18:2002 Methods of test for dense shaped refractory products – Part 18: Determination of bulk density of granular materials by the water method with vacuum

IN 993-19:2004 Methods of test for dense shaped refractory products – Part 19: Determination of thermal expansion by a differential method

IN 993-2:1995 Methods of test for dense shaped refractory products – Part 2: Determination of true density

IN 993-2:1995/A1:2003 Methods of test for dense shaped refractory products – Part 2 : Determination of true density

IN 993-3:1997 Methods of test for dense shaped refractory products – Part 3: Test methods for carbon-containing refractories

IN 993-4:1995 Methods of test for dense shaped refractory products – Part 4: Determination of permeability to gases

IN 993-5:1998 Methods of test for dense shaped refractory products – Part 5: Determination of cold crushing strength

IN 993-6:1995 Methods of test for dense shaped refractory products – Part 6: Determination of modulus of rupture at ambient temperature

IN 993-7:1998 Methods of test for dense shaped refractory products – Part 7: Determination of modulus of rupture at elevated temperatures

IN 993-9:1997 Methods of testing dense shaped refractory products – Part 9: Determination of creep in compression

IN 994:2012 Textile floor coverings – Determination of the side length, squareness and straightness of tiles

IN 995:1995 Textile floor coverings – Assessment of the creep of the backings

IN 996:1995+A3:2009 Piling equipment – 안전 요구 사항

IN 997:2012 WC 팬과 통합 트랩 WC 스위트

IN 997:2012/AC:2012 WC 팬과 통합 트랩 WC 스위트

IN 998-1:2010 Specification for mortar for masonry – Part 1: 박격포 렌더링 및 석고

IN 998-2:2010 Specification for mortar for masonry – Part 2: 모르타르

ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후
[공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  
MIL-Spec Documents2013년 12월 11일 - 6:40 오후
MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.
MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후
아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]
IP Code2016년 4월 12일 - 6:42 오후
IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]
ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후
ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

© 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.

RSS