STD-EN 9XXXX
- EN 900:2007 Chemicals used for treatment of water intended for human consumption – Calcium hypochlorite
- EN 901:2013 Chemicals used for treatment of water intended for human consumption – Sodium hypochlorite
- EN 902:2009 Chemicals used for treatment of water intended for human consumption – Hydrogen peroxide
- EN 903:1993 Water quality – Determination of anionic surfactants by measurement of the methylene blue index MBAS (ISO 7875-1:1984 modified)
- EN 908:1999+A1:2009 Agricultural and forestry machinery – Reel machines for irrigation – Safety
- EN 909:1998+A1:2009 Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety
- EN 9100:2009 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations
- EN 9101:2011 Quality Management Systems – Audit Requirements for Aviation, Space, and Defence Organizations
- EN 9104-001:2013 Aerospace series – Quality management systems – Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
- EN 9104-003:2010 Aerospace series – Quality management systems – Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification
- EN 911:1995 Plastics piping systems – Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping – Test method for leaktightness under external hydrostatic pressure
- EN 9110:2010 Quality Management Systems – Requirements for Aviation Maintenance Organizations
- EN 9115:2013 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations – Deliverable Software (Supplement to EN 9100)
- EN 912:2011 Timber fasteners – Specifications for connectors for timbers
- EN 9120:2010 Quality Management Systems – Requirements for Aviation, Space and Defence Distributors
- EN 9121:2009 Aerospace series – Quality management systems – Assessment applicable to stockist distributors (based on ISO 9001:2000)
- EN 913:2008 Gymnastic equipment – General safety requirements and test methods
- EN 9137:2012 Quality management systems – Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
- EN 914:2008 Gymnastic equipment – Parallel bars and combination asymmetric/parallel bars – Requirements and test methods including safety
- EN 915:2008 Gymnastic equipment – Asymmetric bars – Requirements and test methods including safety
- EN 916:2003 Gymnastic equipment – Vaulting boxes – Requirements and test methods including safety
- EN 917:1997 Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness
- EN 920:2000 Paper and board intended to come into contact with foodstuffs – Determination of dry matter content in an aqueous extract
- EN 923:2005+A1:2008 Adhesives – Terms and definitions
- EN 924:2003 Adhesives – Solvent-borne and solvent-free adhesives – Determination of flashpoint
- EN 926-1:2006 Paragliding equipment – Paragliders – Part 1: Requirements and test methods for structural strength
- EN 926-2:2005 Paragliding equipment – Paragliders – Part 2: Requirements and test methods for classifying flight safety characteristics
- EN 927-1:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 1: Classification and selection
- EN 927-2:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 2: Performance specification
- EN 927-3:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 3: Natural weathering test
- EN 927-5:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 5: Assessment of the liquid water permeability
- EN 927-6:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
- EN 929:1993 Inland navigation vessels – Push-tows – Mounting attachment for demountable signal masts
- EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements
- EN 9300-003:2012 Aerospace series – LOTAR – Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 003: Fundamentals and concepts
- EN 9300-004:2013 Aerospace series – LOTAR – Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 004: Description methods
- EN 9300-011:2013 Aerospace series – LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 011: Reference process description “Data preparation”
- EN 9300-012:2013 Aerospace series – LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 012: Reference process description ”Ingest”
- EN 9300-013:2013 Aerospace series – LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 013: Reference process description ”Archival Storage”
- EN 9300-014:2013 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 014: Reference process description ”Retrieval”
- EN 9300-015:2013 Aerospace series – LOTAR – LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data – Part 015: Reference process description ”Removal”
- EN 931:1997+A2:2009 Footwear manufacturing machines – Lasting machines – Safety requirements
- EN 932-1:1996 Tests for general properties of aggregates – Part 1: Methods for sampling
- EN 932-2:1999 Tests for general properties of aggregates – Part 2: Methods for reducing laboratory samples
- EN 932-3:1996 Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description
- EN 932-3:1996/A1:2003 Tests for general properties of aggregates – Part 3: Procedure and terminology for simplified petrographic description
- EN 932-5:2012 Tests for general properties of aggregates – Part 5: Common equipment and calibration
- EN 932-6:1999 Tests for general properties of aggregates – Part 6: Definitions of repeatability and reproducibility
- EN 933-1:2012 Tests for geometrical properties of aggregates – Part 1: Determination of particle size distribution – Sieving method
- EN 933-10:2009 Tests for geometrical properties of aggregates – Part 10: Assessment of fines – Grading of filler aggregates (air jet sieving)
- EN 933-11:2009 Tests for geometrical properties of aggregates – Part 11: Classification test for the constituents of coarse recycled aggregate
- EN 933-11:2009/AC:2009 Tests for geometrical properties of aggregates – Part 11: Classification test for the constituents of coarse recycled aggregate
- EN 933-2:1995 Tests for geometrical properties of aggregates – Part 2: Determination of particle size distribution – Test sieves, nominal size of apertures
- EN 933-3:2012 Tests for geometrical properties of aggregates – Part 3: Determination of particle shape – Flakiness index
- EN 933-4:2008 Tests for geometrical properties of aggregates – Part 4: Determination of particle shape – Shape index
- EN 933-5:1998 Tests for geometrical properties of aggregates – Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
- EN 933-5:1998/A1:2004 Tests for geometrical properties of aggregates – Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
- EN 933-6:2001 Tests for geometrical properties of aggregates – Part 6: Assessment of surface characteristics – Flow coefficient of aggregates
- EN 933-6:2001/AC:2004 Tests for geometrical properties of aggregates – Part 6: Assessment of surface characteristics – Flow coefficient of aggregates
- EN 933-7:1998 Tests for geometrical properties of aggregates – Part 7: Determination of shell content – Percentage of shells in coarse aggregates
- EN 933-8:2012 Tests for geometrical properties of aggregates – Part 8: Assessment of fines – Sand equivalent test
- EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates – Part 9: Assessment of fines – Methylene blue test
- EN 934-1:2008 Admixtures for concrete, mortar and grout – Part 1: Common requirements
- EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling
- EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout – Part 3: Admixtures for masonry mortar – Definitions, requirements, conformity and marking and labelling
- EN 934-4:2009 Admixtures for concrete, mortar and grout – Part 4: Admixtures for grout for prestressing tendons – Definitions, requirements, conformity, marking and labelling
- EN 934-5:2007 Admixtures for concrete, mortar and grout – Part 5: Admixtures for sprayed concrete – Definitions, requirements, conformity, marking and labelling
- EN 934-6:2001 Admixtures for concrete, mortar and grout – Part 6: Sampling, conformity control and evaluation of conformity
- EN 934-6:2001/A1:2005 Admixtures for concrete, mortar and grout – Part 6: Sampling, conformity control and evaluation of conformity
- EN 935:2004 Chemicals used for treatment of water intended for human consumption – Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric)
- EN 936:2006 Chemicals used for treatment of water intended for human consumption – Carbon dioxide
- EN 937:2009 Chemicals used for treatment of water intended for human consumption – Chlorine
- EN 938:2009 Chemicals used for treatment of water intended for human consumption – Sodium chlorite
- EN 939:2009 Chemicals used for treatment of water intended for human consumption – Hydrochloric acid
- EN 940:2009+A1:2012 Safety of woodworking machines – Combined woodworking machines
- EN 941:1995 Aluminium and aluminium alloys – Circle and circle stock for general application – Specifications
- EN 942:2007 Timber in joinery – General requirements
- EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 1: Performance requirements for ventilated and non-ventilated “gas-tight” (Type 1) and “non-gas-tight” (Type 2) chemical protective suits
- EN 943-1:2002/AC:2005 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 1: Performance requirements for ventilated and non-ventilated ‘gas-tight’ (Type 1) and ‘non-gas-tight’ (Type 2) chemical protective suits
- EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 2: Performance requirements for “gas-tight” (Type 1) chemical protective suits for emergency teams (ET)
- EN 947:1998 Hinged or pivoted doors – Determination of the resistance to vertical load
- EN 948:1999 Hinged or pivoted doors – Determination of the resistance to static torsion
- EN 949:1998 Windows and curtain walling, doors, blinds and shutters – Determination of the resistance to soft and heavy body impact for doors
- EN 950:1999 Door leaves – Determination of the resistance to hard body impact
- EN 951:1998 Door leaves – Method for measurement of height, width, thickness and squareness
- EN 952:1999 Door leaves – General and local flatness – Measurement method
- EN 953:1997+A1:2009 Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards
- EN 957-10:2005 Stationary training equipment – Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods
- EN 957-2:2003 Stationary training equipment – Part 2: Strength training equipment, additional specific safety requirements and test methods
- EN 957-4:2006+A1:2010 Stationary training equipment – Part 4: Strength training benches, additional specific safety requirements and test methods
- EN 957-5:2009 Stationary training equipment – Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
- EN 957-6:2010 Stationary training equipment – Part 6: Treadmills, additional specific safety requirements and test methods
- EN 957-7:1998 Stationary training equipment – Part 7: Rowing machines, additional specific safety requirements and test methods
- EN 957-8:1998 Stationary training equipment – Part 8: Steppers, stairclimbers and climbers – Additional specific safety requirements and test methods
- EN 957-9:2003 Stationary training equipment – Part 9: Elliptical trainers, additional specific safety requirements and test methods
- EN 958:2006+A1:2010 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
- EN 959:2007 Mountaineering equipment – Rock anchors – Safety requirements and test methods
- EN 960:2006 Headforms for use in the testing of protective helmets
- EN 966:2012+A1:2012 Helmets for airborne sports
- EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
- EN 972:1998+A1:2010 Tannery machines – Reciprocating roller machines – Safety requirements
- EN 972:1998+A1:2010/AC:2011 Tannery machines – Reciprocating roller machines – Safety requirements
- EN 973:2009 Chemicals used for treatment of water intended for human consumption – Sodium chloride for regeneration of ion exchangers
- EN 974:2003 Chemicals used for treatment of water intended for human consumption – Phosphoric acid
- EN 975-1:2009 Sawn timber – Appearance grading of hardwoods – Part 1: Oak and beech
- EN 975-1:2009/AC:2010 Sawn timber – Appearance grading of hardwoods – Part 1: Oak and beech
- EN 975-2:2004 Sawn timber – Appearance grading of hardwoods – Part 2: Poplars
- EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP) – Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels – Part 1: Requirements and test methods for single wall tanks
- EN 976-2:1997 Underground tanks of glass-reinforced plastics (GRP) – Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels – Part 2: Transport, handling, storage and installation of single wall tanks
- EN 977:1997 Underground tanks of glass-reinforced plastics (GRP) – Method for one side exposure to fluids
- EN 978:1997 Underground tanks of glass-reinforced plastics (GRP) – Determination of factor alpha and factor beta
- EN 981:1996+A1:2008 Safety of machinery – System of auditory and visual danger and information signals
- EN 984:2001 Textile floor coverings – Determination of the mass per unit area of the use surface of needled floor coverings
- EN 985:2001 Textile floor coverings – Castor chair test
- EN 986:2005 Textile floor coverings – Tiles – Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
- EN 988:1996 Zinc and zinc alloys – Specifications for rolled flat products for building
- EN 989:1995 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the “Push-Out” test
- EN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
- EN 991:1995 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
- EN 992:1995 Determination of the dry density of lightweight aggregate concrete with open structure
- EN 993-1:1995 Methods of test for dense shaped refractory products – Part 1: Determination of bulk density, apparent porosity and true porosity
- EN 993-10:1997 Methods of test for dense shaped refractory products – Part 10: Determination of permanent change in dimensions on heating
- EN 993-11:2007 Methods of test for dense shaped refractory products – Part 11: Determination of resistance to thermal shock
- EN 993-12:1997 Methods of test for dense shaped refractory products – Part 12: Determination of pyrometric cone equivalent (refractoriness)
- EN 993-13:1995 Methods of test for dense shaped refractory products – Part 13: Specification for pyrometric reference cones for laboratory use
- EN 993-15:2005 Methods of test for dense shaped refractory products – Determination of thermal conductivity by the hot-wire (parallel) method
- EN 993-16:1995 Dense shaped refractory products – Methods of test – Part 16: Determination of resistance to sulphuric acid
- EN 993-17:1998 Methods of test for dense shaped refractory products – Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
- EN 993-18:2002 Methods of test for dense shaped refractory products – Part 18: Determination of bulk density of granular materials by the water method with vacuum
- EN 993-19:2004 Methods of test for dense shaped refractory products – Part 19: Determination of thermal expansion by a differential method
- EN 993-2:1995 Methods of test for dense shaped refractory products – Part 2: Determination of true density
- EN 993-2:1995/A1:2003 Methods of test for dense shaped refractory products – Part 2 : Determination of true density
- EN 993-3:1997 Methods of test for dense shaped refractory products – Part 3: Test methods for carbon-containing refractories
- EN 993-4:1995 Methods of test for dense shaped refractory products – Part 4: Determination of permeability to gases
- EN 993-5:1998 Methods of test for dense shaped refractory products – Part 5: Determination of cold crushing strength
- EN 993-6:1995 Methods of test for dense shaped refractory products – Part 6: Determination of modulus of rupture at ambient temperature
- EN 993-7:1998 Methods of test for dense shaped refractory products – Part 7: Determination of modulus of rupture at elevated temperatures
- EN 993-9:1997 Methods of testing dense shaped refractory products – Part 9: Determination of creep in compression
- EN 994:2012 Textile floor coverings – Determination of the side length, squareness and straightness of tiles
- EN 995:1995 Textile floor coverings – Assessment of the creep of the backings
- EN 996:1995+A3:2009 Piling equipment – Safety requirements
- EN 997:2012 WC pans and WC suites with integral trap
- EN 997:2012/AC:2012 WC pans and WC suites with integral trap
- EN 998-1:2010 Specification for mortar for masonry – Part 1: Rendering and plastering mortar
- EN 998-2:2010 Specification for mortar for masonry – Part 2: Masonry mortar
