STD-EN 8XXXX

IN 80:2001 Wall-hung urinals – Connecting dimensions

IN 802:1994 Plastics piping and ducting systems – Injection-moulded thermoplastics fittings for pressure piping systems – Test method for maximum deformation by crushing

IN 803:1994 Plastics piping systems – Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping – Test method for resistance to a short-term internal pressure without end thrust

IN 804:1994 Plastics piping systems – Injection-moulded socket fittings for solvent-cemented joints for pressure piping – Test method for resistance to a short-term internal hydrostatic pressure

IN 805:2000 Water supply – Requirements for systems and components outside buildings

IN 806-1:2000 Specifications for installations inside buildings conveying water for human consumption – Part 1: General

IN 806-1:2000/A1:2001 Specifications for installations inside buildings conveying water for human consumption – Part 1: General

IN 806-2:2005 Specification for installations inside buildings conveying water for human consumption – Part 2: 디자인

IN 806-3:2006 Specifications for installations inside buildings conveying water for human consumption – Part 3: Pipe sizing – 단순화 된 방법

IN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption – Part 4: 설치

IN 806-5:2012 Specifications for installations inside buildings conveying water for human consumption – Part 5: Operation and maintenance

IN 809:1998+A1:2009 Pumps and pump units for liquids – 일반 안전 요구 사항

IN 809:1998+A1:2009/AC:2010 Pumps and pump units for liquids – 일반 안전 요구 사항

IN 810:1997 Dehumidifiers with electrically driven compressors – Rating tests, 마킹, operational requirements and technical data sheet

IN 81-1:1998+A3:2009 Safety rules for the construction and installation of lifts – Part 1: Electric lifts

IN 81-2:1998+A3:2009 Safety rules for the construction and installation of lifts – Part 2: Hydraulic lifts

IN 812:2012 Industrial bump caps

IN 81-21:2009+A1:2012 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 21: New passenger and goods passenger lifts in existing building

IN 81-28:2003 Safety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 28: Remote alarm on passenger and goods passenger lifts

IN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts – Part 3: 전기 및 유압 서비스 리프트

IN 81-3:2000+A1:2008/AC:2009 Safety rules for the construction and installation of lifts – Part 3: 전기 및 유압 서비스 리프트

IN 813:2008 Personal fall protection equipment – Sit harnesses

IN 81-31:2010 Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 31: 접근이 제품은 리프트

IN 81-40:2008 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts 제공과 장애인 이동성을 가진 사람을위한 경사 리프팅 플랫폼

IN 81-41:2010 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 41: 장애인 이동성을 가진 분들을위한 수직 리프팅 플랫폼

IN 81-43:2009 Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 43: 크레인 리프트

IN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock – 안전 요구 사항

IN 81-58:2003 Safety rules for the construction and installation of lifts – Examination and tests – Part 58: Landing doors fire resistance test

IN 816:1996 Sanitary tapware – Automatic shut-off valves PN 10

IN 817:2008 Sanitary tapware – Mechanical mixing valves (PN 10) – General technical specifications

IN 81-70:2003 Safety rules for the construction and installations of lifts – Particular applications for passenger and good passengers lifts – Part 70: Accessibility to lifts for persons including persons with disability

IN 81-70:2003/A1:2004 Safety rules for the construction and installations of lifts – Particular applications for passenger and good passengers lifts – Part 70: Accessibility to lifts for persons including persons with disability

IN 81-71:2005+A1:2006 Safety rules for the construction and installation of lifts – Particular applications to passenger lifts and goods passenger lifts – Part 71: Vandal resistant lifts

IN 81-72:2003 Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 72: Firefighters lifts

IN 81-73:2005 Safety rules for the construction and installation of lifts – Particular applications for passenger and goods passenger lifts – Part 73: Behaviour of lifts in the event of fire

IN 81-80:2003 Safety rules for the construction and installation of lifts – Existing lifts – Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts

IN 818-1:1996+A1:2008 Short link chain for lifting purposes – 안전 – Part 1: 수용의 일반 조건

IN 818-2:1996+A1:2008 Short link chain for lifting purposes – 안전 – Part 2: Medium tolerance chain for chain slings – 학년 8

IN 81-82:2013 Safety rules for the construction and installation of lifts – Existing lifts – Part 82: Rules for the improvement of the accessibility of existing lifts for persons including persons with disability

IN 818-3:1999+A1:2008 Short link chain for lifting purposes – 안전 – Part 3: Medium tolerance chain for chain slings – 학년 4

IN 818-4:1996+A1:2008 Short link chain for lifting purposes – 안전 – Part 4: Chain slings – 학년 8

IN 818-5:1999+A1:2008 Short link chain for lifting purposes – 안전 – Part 5: Chain slings – 학년 4

IN 818-6:2000+A1:2008 Short link chain for lifting purposes – 안전 – Part 6: Chain slings – 제조업체가 제공하는 사용 및 유지 보수에 대한 정보는 사양

IN 818-7:2002+A1:2008 Short link chain for lifting purposes – 안전 – Part 7: 정밀한 공차 체인 호이스트, 학년 T (유형 T, DAT 및 DT)

IN 820-1:2002 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermonechanical properties – Part 1: Determination of flexural strength at elevated temperatures

IN 820-2:2003 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermo-mechanical properties – Part 2: Determination of self-loaded deformation

IN 820-3:2004 Advanced technical ceramics – Methods of testing monolithic ceramics – Thermomechanical properties – Part 3: Determination of resistance to thermal shock by water quenching

IN 820-4:2009 Advanced technical ceramics – Thermomechanical properties of monolithic ceramics – Part 4: Determination of flexural creep deformation at elevated temperatures

IN 820-5:2009 Advanced technical ceramics – Thermomechanical properties of monolithic ceramics – Part 5: Determination of elastic moduli at elevated temperatures

IN 821-1:1995 Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 1: Determination of thermal expansion

IN 821-2:1997 Advanced technical ceramics – Monolithic ceramics – Thermo-physical properties – Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method

IN 821-3:2005 Advanced technical ceramics – Monolithic ceramics. Thermo-physical properties – Part 3: Determination of specific heat capacity

IN 822:2013 Thermal insulating products for building applications – Determination of length and width

IN 823:2013 Thermal insulating products for building applications – Determination of thickness

IN 824:2013 Thermal insulating products for building applications – Determination of squareness

IN 825:2013 Thermal insulating products for building applications – Determination of flatness

IN 826:2013 Thermal insulating products for building applications – Determination of compression behaviour

IN 827:2005 Adhesives – Determination of conventional solids content and constant mass solids content

IN 828:2013 Adhesives – Wettability – Determination by measurement of contact angle and surface free energy of solid surface

IN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances with electrical energy supply

IN 835:1994 Heat cost allocators for the determination of the consumption of room heating radiators – Appliances without an electrical energy supply, based on the evaporation principle

IN 837-1:1996 Pressure gauges – Part 1: Bourdon tube pressure gauges – 치수, metrology, 요구 사항 및 테스트

IN 837-1:1996/AC:1998 Pressure gauges – Part 1: Bourdon tube pressure gauges – 치수, metrology, 요구 사항 및 테스트

IN 837-2:1997 Pressure gauges – Part 2: Selection and installation recommendations for pressure gauges

IN 837-3:1996 Pressure gauges – Part 3: Diaphragm and capsule pressure gauges – 치수, metrology, 요구 사항 및 테스트

IN 838:2010 Workplace exposure – Procedures for measuring gases and vapours using diffusive samplers – Requirements and test methods

IN 84:1997 Wood preservatives – Accelerated ageing of treated wood prior to biological testing – Leaching procedure

IN 840-1:2012 Mobile waste and recycling containers – Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices – Dimensions and design

IN 840-2:2012 Mobile waste and recycling containers – Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(의), for trunnion and/or comb lifting devices – Dimensions and design

IN 840-3:2012 Mobile waste and recycling containers – Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(의), for trunnion and/or comb lifting devices – Dimensions and design

IN 840-4:2012 Mobile waste and recycling containers – Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(의), for wide trunnion or BG- and/or wide comb lifting devices – Dimensions and design

IN 840-5:2012 Mobile waste and recycling containers – Part 5: Performance requirements and test methods

IN 840-6:2012 Mobile waste and recycling containers – Part 6: Safety and health requirements

IN 841:1995 Bar coding – Symbology specifications – Format Description

IN 842:1996+A1:2008 Safety of machinery – Visual danger signals – 일반 요구 사항, 디자인 및 테스트

IN 843-1:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 1: 굴곡 강도의 결정

IN 843-2:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 2: Determination of Young’s modulus, shear modulus and Poisson’s ratio

IN 843-3:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests

IN 843-4:2005 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 4: Vickers, Knoop and Rockwell superficial hardness

IN 843-5:2006 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 5: Statistical analysis

IN 843-6:2009 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 6: Guidance for fractographic investigation

IN 843-7:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 7: C-ring tests

IN 843-8:2010 Advanced technical ceramics – Mechanical properties of monolithic ceramics at room temperature – Part 8: Guidelines for conducting proof tests

IN 844-1:1995 Round and sawn timber – 용어 – Part 1: General terms common to round timber and sawn timber

IN 844-10:1998 Round and sawn timber – 용어 – Part 10: Terms relating to stain and fungal attack

IN 844-11:1998 Round and sawn timber – 용어 – Part 11: Terms relating to degrade by insects

IN 844-12:2000 Round and sawn timber – 용어 – Part 12: Additional terms and general index

IN 844-2:1997 Round and sawn timber – 용어 – Part 2: General terms relating to round timber

IN 844-3:1995 Round and sawn timber – 용어 – Part 3: General terms relating to sawn timber

IN 844-4:1997 Round and sawn timber – 용어 – Part 4: Terms relating to moisture content

IN 844-5:1997 Round and sawn timber – 용어 – Part 5: Terms relating to dimensions of round timber

IN 844-6:1997 Round and sawn timber – 용어 – Part 6: Terms relating to dimensions of sawn timber

IN 844-7:1997 Round and sawn timber – 용어 – Part 7: Terms relating to anatomical structure of timber

IN 844-8:1997 Round and sawn timber – 용어 – Part 8: Terms relating to features of round timber

IN 844-9:1997 Round and sawn timber – 용어 – Part 9: Terms relating to features of sawn timber

IN 845-1:2013 Specification for ancillary components for masonry – Part 1: Wall ties, 긴장의 끈, 옷걸이 및 브라켓

IN 845-2:2013 Specification for ancillary components for masonry – Part 2: 상인방

IN 845-3:2013 Specification for ancillary components for masonry – Part 3: 강철 그물 세공의 침대 관절 강화

IN 846-10:2000 Methods of test for ancillary components for masonry – Part 10: Determination of load capacity and load deflection characteristics of brackets

IN 846-11:2000 Methods of test for ancillary components for masonry – Part 11: Determination of dimensions and bow of lintels

IN 846-13:2001 Methods of test for ancillary components for masonry – Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings

IN 846-14:2012 Methods of test for ancillary components for masonry – Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it

IN 846-2:2000 Methods of test for ancillary components for masonry – Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints

IN 846-3:2000 Methods of test for ancillary components for masonry – Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement

IN 846-4:2001 Methods of test for ancillary components for masonry – Part 4: Determination of load capacity and load-deflection characteristics of straps

IN 846-4:2001/A1:2004 Methods of test for ancillary components for masonry – Part 4: Determination of load capacity and load-deflection characteristics of straps

IN 846-5:2012 Methods of test for ancillary components for masonry – Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)

IN 846-6:2012 Methods of test for ancillary components for masonry – Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)

IN 846-7:2012 Methods of test for ancillary components for masonry – Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)

IN 846-8:2000 Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers

IN 846-8:2000/A1:2006 Methods of test for ancillary components for masonry – Part 8: Determination of load capacity and load-deflection characteristics of joist hangers

IN 846-9:2000 Methods of test for ancillary components for masonry – Part 9: Determination of flexural resistance and shear resistance of lintels

IN 847-1:2013 Tools for woodworking – 안전 요구 사항 – Part 1: Milling tools, circular saw blades

IN 847-2:2013 Tools for woodworking – 안전 요구 사항 – Part 2: Requirements for the shank of shank mounted milling

IN 847-3:2013 Tools for woodworking – 안전 요구 사항 – Part 3: Clamping devices

IN 848-1:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 1: 단일 축 수직 성형기

IN 848-2:2007+A2:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: 단일 스핀들 손 공급 / 통합 공급 라우팅 시스템

IN 848-3:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: 수치 제어 (NC) 드릴링 및 라우팅 기계

IN 851:1995 Aluminium and aluminium alloys – Circle and circle stock for the production of culinary utensils – Specifications

IN 853:1996 Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – 명세서

IN 853:1996/AC:2007 Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – 명세서

IN 854:1996 Rubber hoses and hose assemblies – Textile reinforced hydraulic type – 명세서

IN 855:1996 Plastics hoses and hose assemblies – Thermoplastics textile reinforced hydraulic type – 명세서

IN 856:1996 Rubber hoses and hose assemblies – Rubber-covered spiral wire reinforced hydraulic type – 명세서

IN 857:1996 Rubber hoses and hose assemblies – Wire braid reinforced compact type for hydraulic applications – 명세서

IN 858-1:2002 빛 액체 분리 시스템 (e.g. 석유 및 석유) – Part 1: 제품 디자인의 원리, 성능 테스트, 마킹 및 품질 관리

IN 858-1:2002/A1:2004 빛 액체 분리 시스템 (e.g. 석유 및 석유) – Part 1: 제품 디자인의 원리, 성능 테스트, 마킹 및 품질 관리

IN 858-2:2003 빛 액체 분리 시스템 (e.g. 석유 및 석유) – Part 2: Selection of nominal size, installation, operation and maintenance

IN 859:2007+A2:2012 Safety of woodworking machines – Hand fed surface planing machines

IN 860:2007+A2:2012 Safety of woodworking machines – One side thickness planing machines

IN 861:2007+A2:2012 Safety of woodworking machines – Surface planing and thicknessing machines

IN 862:2005 Packaging – Child-resistant packaging – Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

IN 863:1995 Protective clothing – 기계적 성질 – Test method: Puncture resistance

IN 867-5:2001 Non-biological systems for use in sterilizers – Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S

IN 868-10:2009 Packaging for terminally sterilized medical devices – Part 10: Adhesive coated nonwoven materials of polyolefines – Requirements and test methods

IN 868-2:2009 Packaging for terminally sterilized medical devices – Part 2: Sterilization wrap – Requirements and test methods

IN 868-3:2009 Packaging for terminally sterilized medical devices – Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) – Requirements and test methods

IN 868-4:2009 Packaging for terminally sterilized medical devices – Part 4: Paper bags – Requirements and test methods

IN 868-5:2009 Packaging for terminally sterilized medical devices – Part 5: Sealable pouches and reels of porous materials and plastic film construction – Requirements and test methods

IN 868-6:2009 Packaging for terminally sterilized medical devices – Part 6: Paper for low temperature sterilization processes – Requirements and test methods

IN 868-7:2009 Packaging for terminally sterilized medical devices – Part 7: Adhesive coated paper for low temperature sterilization processes – Requirements and test methods

IN 868-8:2009 Packaging for terminally sterilized medical devices – Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 – Requirements and test methods

IN 868-9:2009 Packaging for terminally sterilized medical devices – Part 9: Uncoated nonwoven materials of polyolefines – Requirements and test methods

IN 869:2006+A1:2009 Safety of machinery – Safety requirements for pressure metal diecasting units

IN 872:2005 Water quality – Determination of suspended solids – Method by filtration through glass fibre filters

IN 877:1999 철 파이프 및 피팅, their joints and accessories for the evacuation of water from buildings – 요구 사항, 시험 방법 및 품질 보증

IN 877:1999/A1:2006 철 파이프 및 피팅, their joints and accessories for the evacuation of water from buildings – 요구 사항, 시험 방법 및 품질 보증

IN 877:1999/A1:2006/AC:2008 철 파이프 및 피팅, their joints and accessories for the evacuation of water from buildings – 요구 사항, 시험 방법 및 품질 보증

IN 878:2004 Chemicals used for treatment of water intended for human consumption – Aluminium sulfate

IN 881:2004 Chemicals used for treatment of water intended for human consumption – Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric)

IN 88-1:2011 Pressure regulators and associated safety devices for gas appliances – Part 1: Pressure regulators for inlet pressures up to and including 50 kPa

IN 882:2004 Chemicals used for treatment of water intended for human consumption – Sodium aluminate

IN 88-2:2007 Pressure regulators and associated safety devices for gas appliances – Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

IN 883:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxyde and polyaluminium chloride hydroxyde sulfate

IN 885:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium chloride hydroxide silicate

IN 886:2004 Chemicals used for treatment of water intended for human consumption – Polyaluminium hydroxide silicate sulfate

IN 887:2004 Chemicals used for treatment of water intended for human consumption – Aluminium iron (III) sulfate

IN 888:2004 Chemicals used for treatment of water intended for human consumption – Iron (III) chloride

IN 889:2004 Chemicals used for treatment of water intended for human consumption – Iron (II) sulfate

IN 89:1999 Gas-fired storage water heaters for the production of domestic hot water

IN 89:1999/A1:1999 Gas-fired storage water heaters for the production of domestic hot water

IN 89:1999/A2:2000 Gas-fired storage water heaters for the production of domestic hot water

IN 89:1999/A3:2006 Gas-fired storage water heaters for the production of domestic hot water

IN 89:1999/A4:2006 Gas-fired storage water heaters for the production of domestic hot water

IN 890:2012 Chemicals used for treatment of water intended for human consumption – Iron (III) sulfate solution

IN 891:2004 Chemicals used for treatment of water intended for human consumption – Iron (III) chloride sulfate

IN 892:2012 Mountaineering equipment – Dynamic mountaineering ropes – 안전 요구 사항 및 시험 방법

IN 893:2010 Mountaineering equipment – Crampons – 안전 요구 사항 및 시험 방법

IN 894-1:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: 디스플레이 및 제어 액추에이터와 인간의 상호 작용에 대한 일반 원칙

IN 894-2:1997+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: 표시

IN 894-3:2000+A1:2008 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: 제어 액추에이터

IN 894-4:2010 Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: 위치 표시 및 제어 액추에이터의 배열

IN 896:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydroxide

IN 897:2012 Chemicals used for treatment of water intended for human consumption – Sodium carbonate

IN 898:2012 Chemicals used for treatment of water intended for human consumption – Sodium hydrogen carbonate

IN 899:2009 Chemicals used for treatment of water intended for human consumption – Sulphuric acid

ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후
[공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  
MIL-Spec Documents2013년 12월 11일 - 6:40 오후
MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.
MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후
아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]
IP Code2016년 4월 12일 - 6:42 오후
IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]
ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후
ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

© 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.

RSS