STD-EN 7XXXX

IN 702:1994 Protective clothing – Protection against heat and flame – Test method: Determination of the contact heat transmission through protective clothing or its materials

IN 703:2004+A1:2009 Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – 안전

IN 705:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analysis and their use

IN 705:1994/AC:1995 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analysis and their use

IN 706:1996+A1:2009 Agricultural machinery – Vine shoot tipping machines – 안전

IN 707:1999+A1:2009 Agricultural machinery – Slurry tankers – 안전

IN 709:1997+A4:2009 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, 모터 괭이, 드라이브 휠 모터 괭이(의) – 안전

IN 709:1997+A4:2009/AC:2012 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, 모터 괭이, 드라이브 휠 모터 괭이(의) – 안전

IN 710:1997+A1:2010 주조 성형 및 coremaking 기계 및 플랜트 관련 장비에 대한 안전 요구 사항

IN 710:1997+A1:2010/AC:2012 주조 성형 및 coremaking 기계 및 플랜트 관련 장비에 대한 안전 요구 사항

IN 711:1995 Inland navigation vessels – Railings for decks – 요구 사항, 유형

IN 71-1:2011+A2:2013 Safety of toys – Part 1: Mechanical and physical properties

IN 71-10:2005 Safety of toys – Part 10: Organic chemical compounds – Sample preparation and extraction

IN 71-11:2005 Safety of toys – Part 11: Organic chemical compounds – Methods of analysis

IN 71-12:2013 Safety of toys – Part 12: N-Nitrosamines and N-nitrosatable substances

IN 712:1993 Thermoplastics piping systems – End-load bearing mechanical joints between pressure pipes and fittings – Test method for resistance to pull-out under constant longitudinal force

IN 71-2:2011 Safety of toys – Part 2: Flammability

IN 713:1993 Plastics piping systems – Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending

IN 71-3:2013 Safety of toys – Part 3: Migration of certain elements

IN 714:1994 Thermoplastics piping systems – Non-end-load-bearing elastomeric sealing ring type joints beteween pressure pipes and moulded fittings – Test method for leaktighness under internal hydrostatic pressure without end thrust

IN 71-4:2013 Safety of toys – Part 4: Experimental sets for chemistry and related activities

IN 715:1994 Thermoplastics piping systems – End-load bearing joints between small diameter pressure pipes and fittings – Test method for leaktightness under internal water pressure, including end thrust

IN 71-5:2013 Safety of toys – Part 5: Chemical toys (sets) other than experimental sets

IN 716-1:2008+A1:2013 Furniture – Children’s cots and folding cots for domestic use – Part 1: 안전 요구 사항

IN 716-2:2008+A1:2013 Furniture – Children’s cots and folding cots for domestic use – Part 2: 시험 방법

IN 71-7:2002 Safety of toys – Part 7: Finger paints – Requirements and test methods

IN 717-1:2004 Wood-based panels – Determination of formaldehyde release – Part 1: Formaldehyde emission by the chamber method

IN 717-2:1994 Wood-based panels – Determination of formaldehyde release – Part 2: Formaldehyde release by the gas analysis method

IN 717-2:1994/AC:2002 Wood-based panels – Determination of formaldehyde release – Part 2: Formaldehyde release by the gas analysis method

IN 717-3:1996 Wood-based panels – Determination of formaldehyde release – Part 3: Formaldehyde release by the flask method

IN 71-8:2011 Safety of toys – Part 8: Activity toys for domestic use

IN 71-9:2005+A1:2007 Safety of toys – Part 9: Organic chemical compounds – 요구 사항

IN 720-1:1999 Transportable gas cylinders – Gases and gas mixtures – Part 1: Properties of pure gases

IN 721:2004 Leisure accommodation vehicles – Safety ventilation requirements

IN 722-1:2004 Leisure accommodation vehicles – Liquid fuel heating systems – Part 1: Caravans and caravan holiday homes

IN 723:2009 Copper and copper alloys – Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

IN 725-1:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 1: Determination of impurities in alumina

IN 725-10:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 10: Determination of compaction properties

IN 725-11:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 11: Determination of densification on natural sintering

IN 725-12:2001 Advanced technical ceramics – Methods of test for ceramic powders – Part 12: Chemical analysis of zirconia

IN 725-2:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 2: Determination of impurities in barium titanate

IN 725-3:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas

IN 725-4:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 4: Determination of oxygen content in aluminium nitride by XRF analysis

IN 725-5:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 5: 입도 분포의 측정

IN 725-5:2007/AC:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 5: 입도 분포의 측정

IN 725-8:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 8: Determination of tapped bulk density

IN 725-9:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 9: Determination of un-tapped bulk density

IN 726-1:1994 Identification card systems – Telecommunications integrated circuit(의) cards and terminals – Part 1: Systems overview

IN 726-2:1995 Identification card systems – Telecommunications integrated circuit(의) cards and terminals – Part 2: Security framework

IN 726-3:1994 Identification card systems – Telecommunications integrated circuit(의) cards and terminals – Part 3: Application independent card requirements

IN 726-4:1994 Identification card systems – Telecommunications integrated circuit(의) cards and terminals – Part 4: Application independent card related terminal requirements

IN 726-5:1999 Identification card systems – Telecommunications integrated circuit(의) cards and terminals – Part 5: Payment methods

IN 726-6:1995 Identification card system – Telecommunications integrated circuit(의) cards and terminals – Part 6: Telecommunication features

IN 726-7:1999 Identification card systems – Telecommunications integrated circuit(의) cards and terminals – Part 7: Security module

IN 727:1994 Plastics piping and ducting systems – Thermoplastics pipes and fittings – Determination of Vicat softening temperature (VST)

IN 728:1997 Plastics piping and ducting systems – Polyolefin pipes and fittings – Determination of oxidation induction time

IN 73:1988 Wood preservatives – Accelerated ageing tests of treated wood prior to biological testing – Evaporative ageing procedure

IN 73:1988/AC:1992 Wood preservatives – Accelerated ageing of treated wood prior to biological testing – Evaporative ageing procedure

IN 732:1998 Specifications for dedicated liquefied petroleum gas appliances – Absorption refrigerators

IN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket – Nominal duty point, main dimensions, designation system

IN 734:1995 Side channel pumps PN 40 – Nominal duty point, main dimensions, designation system

IN 735:1995 Overall dimensions of rotodynamic pumps – Tolerances

IN 736-1:1995 밸브 – 용어 – Part 1: Definition of types of valves

IN 736-2:1997 밸브 – 용어 – Part 2: Definition of components of valves

IN 736-3:2008 밸브 – 용어 – Part 3: Definition of terms

IN 741:2000+A1:2010 Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials

IN 74-1:2005 커플러, spigot pins and baseplates for use in falsework and scaffolds – Part 1: Couplers for tubes – Requirements and test procedures

IN 74-2:2008 커플러, spigot pins and baseplates for use in falsework and scaffolds – Part 2: Special couplers – Requirements and test procedures

IN 74-3:2007 커플러, spigot pins and baseplates for use in falsework and scaffolds – Part 3: Plain base plates and spigot pins – Requirements and test procedures

IN 744:1995 Plastics piping and ducting systems – Thermoplastics pipes – Test method for resistance to external blows by the round-the-clock method

IN 746-1:1997+A1:2009 Industrial thermoprocessing equipment – Part 1: 산업 thermoprocessing 장비에 대한 일반 안전 요구 사항

IN 746-2:2010 Industrial thermoprocessing equipment – Part 2: 연소 및 연료 처리 시스템에 대한 안전 요구 사항

IN 746-3:1997+A1:2009 Industrial thermoprocessing equipment – Part 3: 분위기 가스의 생성 및 사용에 대한 안전 요구 사항

IN 746-4:2000 Industrial thermoprocessing equipment – Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment

IN 746-5:2000 Industrial thermoprocessing equipment – Part 5: Particular safety requirements for salt bath thermoprocessing equipment

IN 746-8:2000 Industrial thermoprocessing equipment – Part 8: Particular safety requirements for quenching equipment

IN 747-1:2012 Furniture – Bunk beds and high beds – Part 1: 안전, strength and durability requirements

IN 747-2:2012 Furniture – Bunk beds and high beds – Part 2: 시험 방법

IN 748:2013 Playing field equipment – Football goals – Functional and safety requirements, 시험 방법

IN 749:2004 Playing field equipment – Handball goals – Functional and safety requirements, 시험 방법

IN 749:2004/AC:2005 Playing field equipment – Handball goals – Functional and safety requirements, 시험 방법

IN 750:2004 Playing field equipment – Hockey goals – Functional and safety requirements, 시험 방법

IN 750:2004/AC:2005 Playing field equipment – Hockey goals – Functional and safety requirements, 시험 방법

IN 751-1:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 1: Anaerobic jointing compounds

IN 751-2:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 2: Non-hardening jointing compounds

IN 751-3:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes

IN 751-3:1996/AC:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes

IN 752:2008 Drain and sewer systems outside buildings

IN 754-1:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 1: 검사 및 전달을위한 기술적 조건

IN 754-2:2013 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 2: 기계적 성질

IN 754-3:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 3: Round bars, tolerances on dimensions and form

IN 754-4:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 4: Square bars, tolerances on dimensions and form

IN 754-5:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 5: Rectangular bars, tolerances on dimensions and form

IN 754-6:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 6: Hexagonal bars, tolerances on dimensions and form

IN 754-7:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 7: Seamless tubes, tolerances on dimensions and form

IN 754-8:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 8: Porthole tubes, tolerances on dimensions and form

IN 755-1:2008 Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles – Part 1: 검사 및 전달을위한 기술적 조건

IN 755-2:2013 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 2: 기계적 성질

IN 755-3:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 3: Round bars, tolerances on dimensions and form

IN 755-4:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 4: Square bars, tolerances on dimensions and form

IN 755-5:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 5: Rectangular bars, tolerances on dimensions and form

IN 755-6:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 6: Hexagonal bars, tolerances on dimensions and form

IN 755-7:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 7: Seamless tubes, tolerances on dimensions and form

IN 755-8:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 8: Porthole tubes, tolerances on dimensions and form

IN 755-9:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 9: Profiles, tolerances on dimensions and form

IN 76:1978 Packages for certain prepacked foodstuffs – Capacities of glass and metal containers

IN 761:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) 파이프 – Determination of the creep factor under dry conditions

IN 761:1994/AC:1995 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) 파이프 – Determination of the creep factor under dry conditions

IN 764-1:2004 Pressure equipment – Part 1: 용어 – Pressure, temperature, volume, nominal size

IN 764-2:2012 Pressure equipment – Part 2: Quantities, symbols and units

IN 764-3:2002 Pressure equipment – Part 3: Definition of parties involved

IN 764-4:2002 Pressure equipment – Part 4: Establishment of technical delivery conditions for metallic materials

IN 764-5:2002 Pressure Equipment – Part 5: Compliance and Inspection Documentation of Materials

IN 764-7:2002 Pressure equipment – Part 7: Safety systems for unfired pressure equipment

IN 764-7:2002/AC:2006 Pressure equipment – Part 7: Safety systems for unfired pressure equipment

IN 765:1994 Sacks for the transport of food aid – Sacks made of woven polyolefin fabric other than polypropylene only

IN 766:1994 Sacks for the transport of food aid – Sacks made of jute fabric

IN 767:1994 Sacks for the transport of food aid – Sacks made of woven jute/polyolefin fabric

IN 768:1994 Sacks for the transport of food aid – Sacks made of lined cotton fabric

IN 769:1994 Sacks for the transport of food aid – Sacks made of woven cotton/polyolefin fabric

IN 770:1994 Sacks for the transport of food aid – Paper sacks

IN 771-1:2011 Specification for masonry units – Part 1: 점토 벽돌 단위

IN 771-2:2011 Specification for masonry units – Part 2: 규산 칼슘 벽돌 단위

IN 771-3:2011 Specification for masonry units – Part 3: 골재 콘크리트 벽돌 단위 (고밀도 경량 골재)

IN 771-4:2011 Specification for masonry units – Part 4: 압력 가마로 소독 한 공기에 쐬인 콘크리트 벽돌 단위

IN 771-5:2011 Specification for masonry units – Part 5: 제조 돌 벽돌 단위

IN 771-6:2011 Specification for masonry units – Part 6: 자연적인 돌 벽돌 단위

IN 772-1:2011 Methods of test for masonry units – Part 1: 압축 강도의 결정

IN 772-10:1999 Methods of test for masonry units – Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units

IN 772-11:2011 Methods of test for masonry units – Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units

IN 772-13:2000 Methods of test for masonry units – Part 13: Determination of net and gross dry density of masonry units (except for natural stone)

IN 772-14:2001 Methods of test for masonry units – Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units

IN 772-15:2000 Methods of test for masonry units – Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units

IN 772-16:2011 Methods of test for masonry units – Part 16: Determination of dimensions

IN 772-18:2011 Methods of test for masonry units – Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units

IN 772-19:2000 Methods of test for masonry units – Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units

IN 772-2:1998 Methods of test for masonry units – Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)

IN 772-2:1998/A1:2005 Methods of test for masonry units – Part 2: Determination of percentage area of voids in masonry units (by paper indentation)

IN 772-20:2000 Methods of test for masonry units – Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units

IN 772-20:2000/A1:2005 Methods of test for masonry units – Part 20: Determination of flatness of faces of masonry units

IN 772-21:2011 Methods of test for masonry units – Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption

IN 772-3:1998 Methods of test for masonry units – Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing

IN 772-4:1998 Methods of test for masonry units – Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units

IN 772-5:2001 Methods of test for masonry units – Part 5: Determination of the active soluble salts content of clay masonry units

IN 772-6:2001 Methods of test for masonry units – Part 6: Determination of bending tensile strength of aggregate concrete masonry units

IN 772-7:1998 Methods of test for masonry units – Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water

IN 772-9:1998 Methods of test for masonry units – Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling

IN 772-9:1998/A1:2005 Methods of test for masonry units – Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling

IN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 1: System D – 안전

IN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 2: System E – 안전

IN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use – Part 3: System F – 안전

IN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 4: System H – 안전

IN 778:2009 공간 난방 넷 열 입력을 초과하지 않는 국내 가스 보일러 강제 대류 공기 히터 70 kW 급, 연소 공기 및 / 또는 연소 생성물의 수송을 지원하기 위해 팬이없는

IN 779:2012 Particulate air filters for general ventilation – Determination of the filtration performance

IN 786:1996+A2:2009 Garden equipment – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers – Mechanical safety

IN 787:1994 Sacks for the transport of food aid – Sacks made of polyethylene film

IN 788:1994 Sacks for the transport of food aid – Tubular sacks made of composite film

IN 790:2001 Inland navigation vessels – Stairs with inclination angles of 45° to 60° – 요구 사항, 유형

IN 791:1995+A1:2009 Drill rigs – 안전

IN 792-13:2000+A1:2008 Hand-held non-electric power tools – 안전 요구 사항 – Part 13: 패스너 운전 도구

IN 794-3:1998+A2:2009 Lung ventilators – Part 3: Particular requirements for emergency and transport ventilators

IN 795:2012 Personal fall protection equipment – Anchor devices

ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후
[공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  
MIL-Spec Documents2013년 12월 11일 - 6:40 오후
MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.
MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후
아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]
IP Code2016년 4월 12일 - 6:42 오후
IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]
ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후
ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

© 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.

RSS