STD-EN 7XXXX
- EN 702:1994 Protective clothing – Protection against heat and flame – Test method: Determination of the contact heat transmission through protective clothing or its materials
- EN 703:2004+A1:2009 Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – Safety
- EN 705:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analysis and their use
- EN 705:1994/AC:1995 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes and fittings – Methods for regression analysis and their use
- EN 706:1996+A1:2009 Agricultural machinery – Vine shoot tipping machines – Safety
- EN 707:1999+A1:2009 Agricultural machinery – Slurry tankers – Safety
- EN 709:1997+A4:2009 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety
- EN 709:1997+A4:2009/AC:2012 Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety
- EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
- EN 710:1997+A1:2010/AC:2012 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
- EN 711:1995 Inland navigation vessels – Railings for decks – Requirements, types
- EN 71-1:2011+A2:2013 Safety of toys – Part 1: Mechanical and physical properties
- EN 71-10:2005 Safety of toys – Part 10: Organic chemical compounds – Sample preparation and extraction
- EN 71-11:2005 Safety of toys – Part 11: Organic chemical compounds – Methods of analysis
- EN 71-12:2013 Safety of toys – Part 12: N-Nitrosamines and N-nitrosatable substances
- EN 712:1993 Thermoplastics piping systems – End-load bearing mechanical joints between pressure pipes and fittings – Test method for resistance to pull-out under constant longitudinal force
- EN 71-2:2011 Safety of toys – Part 2: Flammability
- EN 713:1993 Plastics piping systems – Mechanical joints between fittings and polyolefin pressure pipes – Test method for leaktightness under internal pressure of assemblies subjected to bending
- EN 71-3:2013 Safety of toys – Part 3: Migration of certain elements
- EN 714:1994 Thermoplastics piping systems – Non-end-load-bearing elastomeric sealing ring type joints beteween pressure pipes and moulded fittings – Test method for leaktighness under internal hydrostatic pressure without end thrust
- EN 71-4:2013 Safety of toys – Part 4: Experimental sets for chemistry and related activities
- EN 715:1994 Thermoplastics piping systems – End-load bearing joints between small diameter pressure pipes and fittings – Test method for leaktightness under internal water pressure, including end thrust
- EN 71-5:2013 Safety of toys – Part 5: Chemical toys (sets) other than experimental sets
- EN 716-1:2008+A1:2013 Furniture – Children’s cots and folding cots for domestic use – Part 1: Safety requirements
- EN 716-2:2008+A1:2013 Furniture – Children’s cots and folding cots for domestic use – Part 2: Test methods
- EN 71-7:2002 Safety of toys – Part 7: Finger paints – Requirements and test methods
- EN 717-1:2004 Wood-based panels – Determination of formaldehyde release – Part 1: Formaldehyde emission by the chamber method
- EN 717-2:1994 Wood-based panels – Determination of formaldehyde release – Part 2: Formaldehyde release by the gas analysis method
- EN 717-2:1994/AC:2002 Wood-based panels – Determination of formaldehyde release – Part 2: Formaldehyde release by the gas analysis method
- EN 717-3:1996 Wood-based panels – Determination of formaldehyde release – Part 3: Formaldehyde release by the flask method
- EN 71-8:2011 Safety of toys – Part 8: Activity toys for domestic use
- EN 71-9:2005+A1:2007 Safety of toys – Part 9: Organic chemical compounds – Requirements
- EN 720-1:1999 Transportable gas cylinders – Gases and gas mixtures – Part 1: Properties of pure gases
- EN 721:2004 Leisure accommodation vehicles – Safety ventilation requirements
- EN 722-1:2004 Leisure accommodation vehicles – Liquid fuel heating systems – Part 1: Caravans and caravan holiday homes
- EN 723:2009 Copper and copper alloys – Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
- EN 725-1:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 1: Determination of impurities in alumina
- EN 725-10:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 10: Determination of compaction properties
- EN 725-11:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 11: Determination of densification on natural sintering
- EN 725-12:2001 Advanced technical ceramics – Methods of test for ceramic powders – Part 12: Chemical analysis of zirconia
- EN 725-2:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 2: Determination of impurities in barium titanate
- EN 725-3:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
- EN 725-4:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 4: Determination of oxygen content in aluminium nitride by XRF analysis
- EN 725-5:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 5: Determination of particle size distribution
- EN 725-5:2007/AC:2007 Advanced technical ceramics – Methods of test for ceramic powders – Part 5: Determination of particle size distribution
- EN 725-8:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 8: Determination of tapped bulk density
- EN 725-9:2006 Advanced technical ceramics – Methods of test for ceramic powders – Part 9: Determination of un-tapped bulk density
- EN 726-1:1994 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 1: Systems overview
- EN 726-2:1995 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 2: Security framework
- EN 726-3:1994 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 3: Application independent card requirements
- EN 726-4:1994 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 4: Application independent card related terminal requirements
- EN 726-5:1999 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 5: Payment methods
- EN 726-6:1995 Identification card system – Telecommunications integrated circuit(s) cards and terminals – Part 6: Telecommunication features
- EN 726-7:1999 Identification card systems – Telecommunications integrated circuit(s) cards and terminals – Part 7: Security module
- EN 727:1994 Plastics piping and ducting systems – Thermoplastics pipes and fittings – Determination of Vicat softening temperature (VST)
- EN 728:1997 Plastics piping and ducting systems – Polyolefin pipes and fittings – Determination of oxidation induction time
- EN 73:1988 Wood preservatives – Accelerated ageing tests of treated wood prior to biological testing – Evaporative ageing procedure
- EN 73:1988/AC:1992 Wood preservatives – Accelerated ageing of treated wood prior to biological testing – Evaporative ageing procedure
- EN 732:1998 Specifications for dedicated liquefied petroleum gas appliances – Absorption refrigerators
- EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket – Nominal duty point, main dimensions, designation system
- EN 734:1995 Side channel pumps PN 40 – Nominal duty point, main dimensions, designation system
- EN 735:1995 Overall dimensions of rotodynamic pumps – Tolerances
- EN 736-1:1995 Valves – Terminology – Part 1: Definition of types of valves
- EN 736-2:1997 Valves – Terminology – Part 2: Definition of components of valves
- EN 736-3:2008 Valves – Terminology – Part 3: Definition of terms
- EN 741:2000+A1:2010 Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials
- EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 1: Couplers for tubes – Requirements and test procedures
- EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 2: Special couplers – Requirements and test procedures
- EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds – Part 3: Plain base plates and spigot pins – Requirements and test procedures
- EN 744:1995 Plastics piping and ducting systems – Thermoplastics pipes – Test method for resistance to external blows by the round-the-clock method
- EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment
- EN 746-2:2010 Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems
- EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases
- EN 746-4:2000 Industrial thermoprocessing equipment – Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
- EN 746-5:2000 Industrial thermoprocessing equipment – Part 5: Particular safety requirements for salt bath thermoprocessing equipment
- EN 746-8:2000 Industrial thermoprocessing equipment – Part 8: Particular safety requirements for quenching equipment
- EN 747-1:2012 Furniture – Bunk beds and high beds – Part 1: Safety, strength and durability requirements
- EN 747-2:2012 Furniture – Bunk beds and high beds – Part 2: Test methods
- EN 748:2013 Playing field equipment – Football goals – Functional and safety requirements, test methods
- EN 749:2004 Playing field equipment – Handball goals – Functional and safety requirements, test methods
- EN 749:2004/AC:2005 Playing field equipment – Handball goals – Functional and safety requirements, test methods
- EN 750:2004 Playing field equipment – Hockey goals – Functional and safety requirements, test methods
- EN 750:2004/AC:2005 Playing field equipment – Hockey goals – Functional and safety requirements, test methods
- EN 751-1:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 1: Anaerobic jointing compounds
- EN 751-2:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 2: Non-hardening jointing compounds
- EN 751-3:1996 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes
- EN 751-3:1996/AC:1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water – Part 3: Unsintered PTFE tapes
- EN 752:2008 Drain and sewer systems outside buildings
- EN 754-1:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 1: Technical conditions for inspection and delivery
- EN 754-2:2013 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 2: Mechanical properties
- EN 754-3:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 3: Round bars, tolerances on dimensions and form
- EN 754-4:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 4: Square bars, tolerances on dimensions and form
- EN 754-5:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 5: Rectangular bars, tolerances on dimensions and form
- EN 754-6:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 6: Hexagonal bars, tolerances on dimensions and form
- EN 754-7:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 7: Seamless tubes, tolerances on dimensions and form
- EN 754-8:2008 Aluminium and aluminium alloys – Cold drawn rod/bar and tube – Part 8: Porthole tubes, tolerances on dimensions and form
- EN 755-1:2008 Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles – Part 1: Technical conditions for inspection and delivery
- EN 755-2:2013 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 2: Mechanical properties
- EN 755-3:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 3: Round bars, tolerances on dimensions and form
- EN 755-4:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 4: Square bars, tolerances on dimensions and form
- EN 755-5:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 5: Rectangular bars, tolerances on dimensions and form
- EN 755-6:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 6: Hexagonal bars, tolerances on dimensions and form
- EN 755-7:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 7: Seamless tubes, tolerances on dimensions and form
- EN 755-8:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 8: Porthole tubes, tolerances on dimensions and form
- EN 755-9:2008 Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 9: Profiles, tolerances on dimensions and form
- EN 76:1978 Packages for certain prepacked foodstuffs – Capacities of glass and metal containers
- EN 761:1994 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under dry conditions
- EN 761:1994/AC:1995 Plastics piping systems – Glass-reinforced thermosetting plastics (GRP) pipes – Determination of the creep factor under dry conditions
- EN 764-1:2004 Pressure equipment – Part 1: Terminology – Pressure, temperature, volume, nominal size
- EN 764-2:2012 Pressure equipment – Part 2: Quantities, symbols and units
- EN 764-3:2002 Pressure equipment – Part 3: Definition of parties involved
- EN 764-4:2002 Pressure equipment – Part 4: Establishment of technical delivery conditions for metallic materials
- EN 764-5:2002 Pressure Equipment – Part 5: Compliance and Inspection Documentation of Materials
- EN 764-7:2002 Pressure equipment – Part 7: Safety systems for unfired pressure equipment
- EN 764-7:2002/AC:2006 Pressure equipment – Part 7: Safety systems for unfired pressure equipment
- EN 765:1994 Sacks for the transport of food aid – Sacks made of woven polyolefin fabric other than polypropylene only
- EN 766:1994 Sacks for the transport of food aid – Sacks made of jute fabric
- EN 767:1994 Sacks for the transport of food aid – Sacks made of woven jute/polyolefin fabric
- EN 768:1994 Sacks for the transport of food aid – Sacks made of lined cotton fabric
- EN 769:1994 Sacks for the transport of food aid – Sacks made of woven cotton/polyolefin fabric
- EN 770:1994 Sacks for the transport of food aid – Paper sacks
- EN 771-1:2011 Specification for masonry units – Part 1: Clay masonry units
- EN 771-2:2011 Specification for masonry units – Part 2: Calcium silicate masonry units
- EN 771-3:2011 Specification for masonry units – Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
- EN 771-4:2011 Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units
- EN 771-5:2011 Specification for masonry units – Part 5: Manufactured stone masonry units
- EN 771-6:2011 Specification for masonry units – Part 6: Natural stone masonry units
- EN 772-1:2011 Methods of test for masonry units – Part 1: Determination of compressive strength
- EN 772-10:1999 Methods of test for masonry units – Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units
- EN 772-11:2011 Methods of test for masonry units – Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
- EN 772-13:2000 Methods of test for masonry units – Part 13: Determination of net and gross dry density of masonry units (except for natural stone)
- EN 772-14:2001 Methods of test for masonry units – Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units
- EN 772-15:2000 Methods of test for masonry units – Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units
- EN 772-16:2011 Methods of test for masonry units – Part 16: Determination of dimensions
- EN 772-18:2011 Methods of test for masonry units – Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
- EN 772-19:2000 Methods of test for masonry units – Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units
- EN 772-2:1998 Methods of test for masonry units – Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
- EN 772-2:1998/A1:2005 Methods of test for masonry units – Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
- EN 772-20:2000 Methods of test for masonry units – Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units
- EN 772-20:2000/A1:2005 Methods of test for masonry units – Part 20: Determination of flatness of faces of masonry units
- EN 772-21:2011 Methods of test for masonry units – Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
- EN 772-3:1998 Methods of test for masonry units – Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
- EN 772-4:1998 Methods of test for masonry units – Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
- EN 772-5:2001 Methods of test for masonry units – Part 5: Determination of the active soluble salts content of clay masonry units
- EN 772-6:2001 Methods of test for masonry units – Part 6: Determination of bending tensile strength of aggregate concrete masonry units
- EN 772-7:1998 Methods of test for masonry units – Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water
- EN 772-9:1998 Methods of test for masonry units – Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
- EN 772-9:1998/A1:2005 Methods of test for masonry units – Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
- EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 1: System D – Safety
- EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 2: System E – Safety
- EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use – Part 3: System F – Safety
- EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 4: System H – Safety
- EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
- EN 779:2012 Particulate air filters for general ventilation – Determination of the filtration performance
- EN 786:1996+A2:2009 Garden equipment – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers – Mechanical safety
- EN 787:1994 Sacks for the transport of food aid – Sacks made of polyethylene film
- EN 788:1994 Sacks for the transport of food aid – Tubular sacks made of composite film
- EN 790:2001 Inland navigation vessels – Stairs with inclination angles of 45° to 60° – Requirements, types
- EN 791:1995+A1:2009 Drill rigs – Safety
- EN 792-13:2000+A1:2008 Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools
- EN 794-3:1998+A2:2009 Lung ventilators – Part 3: Particular requirements for emergency and transport ventilators
- EN 795:2012 Personal fall protection equipment – Anchor devices
