STD-EN 6XXXX
- IN 601:2004 Aluminium and aluminium alloys – Castings – Chemical composition of castings for use in contact with foodstuff
- IN 602:2004 Aluminium and aluminium alloys – Wrought products – Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
- IN 603-1:1996 Aluminium and aluminium alloys – Wrought forging stock – Part 1: 검사 및 전달을위한 기술적 조건
- IN 603-2:1996 Aluminium and aluminium alloys – Wrought forging stock – Part 2: 기계적 성질
- IN 603-3:2000 Aluminium and aluminium alloys – Wrought forging stock – Part 3: 크기와 형태의 허용차
- IN 604-1:1997 Aluminium and aluminium alloys – Cast forging stock – Part 1: 검사 및 전달을위한 기술적 조건
- IN 604-2:1997 Aluminium and aluminium alloys – Cast forging stock – Part 2: 크기와 형태의 허용차
- IN 6049-002:2010 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 002: General and list of product standards
- IN 6049-003:2009 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 003: Braided, tubular, expandable – Product standard
- IN 6049-006:2012 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 006: Self-wrapping protective sleeve, flexible post installation – Product standard
- IN 6049-007:2012 Aerospace series – Electrical cables, installation – Protection sleeve in meta-aramid fibres – Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from – 55 °C to 260 °C – Product standard
- IN 6049-008:2013 Aerospace series – Electrical cables, installation – Protective sleeves in meta-aramid fibres – Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from – 55 °C to 200 °C – Product standard
- IN 6059-100:2011 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 100: General
- IN 6059-501:2010 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 501: Voltage proof test
- IN 6059-502:2009 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 502: Resistance to electrical arcs
- IN 6059-503:2012 Aerospace series – Electrical cables, installation – Protection sleeves – Test methods – Part 503: Temperature rise due to rated current injected on the sleeve
- IN 606:2004 Bar coding – Transport and handling labels for steel products
- IN 60601-2-52:2010 Medical electrical equipment – Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
- IN 60601-2-52:2010/AC:2011 Medical electrical equipment – Part 2-52: Particular requirements for basic safety and essential performance of medical beds (IEC 60601-2-52:2009)
- IN 6069:2009 Aerospace series – Rivet, 100° reduced flush head, close tolerance – Inch series
- IN 607:2004 Eaves gutters and fittings made of PVC-U – Definitions, 요구 사항 및 테스트
- IN 6072:2010 Aerospace series – Metallic materials – Test methods – Constant amplitude fatigue testing
- IN 609-1:1999+A2:2009 농업 및 임업 기계 - 로그 스플리터의 안전 - 제 1: 웨지 스플리터
- IN 609-2:1999+A1:2009 농업 및 임업 기계 - 로그 스플리터의 안전 - 제 2: 나사 스플리터
- IN 610:1995 Tin and tin alloys – Ingot tin
- IN 611-1:1995 Tin and tin alloys – Pewter and pewterware – Part 1: Pewter
- IN 611-2:1996 Tin and tin alloys – Pewter and pewterware – Part 2: Pewterware
- IN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
- IN 613:2000 Independent gas-fired convection heaters
- IN 613:2000/A1:2003 Independent gas-fired convection heaters
- IN 614-1:2006+A1:2009 기계의 안전 - 인체 공학적 설계 원리 - 부품 1: 용어 및 일반 원칙
- IN 614-2:2000+A1:2008 기계의 안전 - 인체 공학적 설계 원리 - 부품 2: 기계 및 작업 작업의 디자인 사이의 상호 작용
- IN 615:2009 Fire protection – Fire extinguishing media – Specifications for powders (other than class D powders)
- IN 617:2001+A1:2010 연속 처리 장비 및 시스템 - 사일로 대량 재료의 저장을 위해 장비에 대한 안전 및 EMC 요구 사항, 벙커, 빈과 호퍼
- IN 618:2002+A1:2010 연속 처리 장비 및 시스템 - 고정 벨트 컨베이어를 제외하고 대량 재료의 기계적 처리를위한 장비에 대한 안전 및 EMC 요구 사항
- IN 619:2002+A1:2010 연속 처리 장비 및 시스템 - 단위 부하의 기계 처리를위한 장비에 대한 안전 및 EMC 요구 사항
- IN 620:2002+A1:2010 연속 처리 장비 및 시스템 - 벌크 재료에 대한 고정 벨트 컨베이어에 대한 안전 및 EMC 요구 사항
- IN 621:2009 그물 열 입력을 초과하지 않는 가열 공간이 아닌 국내 가스 보일러 강제 대류 공기 히터 300 kW 급, 연소 공기 및 / 또는 연소 생성물의 수송을 지원하기 위해 팬이없는
- IN 622-1:2003 Fibreboards – Specifications – Part 1: 일반 요구 사항
- IN 622-2:2004 Fibreboards – Specifications – Part 2: Requirements for hardboards
- IN 622-2:2004/AC:2005 Fibreboards – Specifications – Part 2: Requirements for hardboards
- IN 622-3:2004 Fibreboards – Specifications – Part 3: Requirements for medium boards
- IN 622-4:2009 Fibreboards – Specifications – Part 4: Requirements for softboards
- IN 622-5:2009 Fibreboards – Specifications – Part 5: Requirements for dry process boards (MDF)
- IN 623-1:2006 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 1: Determination of the presence of defects by dye penetration
- IN 623-2:1993 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 2: Determination of density and porosity
- IN 623-3:2001 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method)
- IN 623-4:2004 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 4: Determination of surface roughness
- IN 623-5:2009 Advanced technical ceramics – Monolithic ceramics – General and textural properties – Part 5: Determination of phase volume fraction by evaluation of micrographs
- IN 624:2011 Specification for dedicated LPG appliances – Room sealed LPG space heating equipment for installation in vehicles and boats
- IN 625:1995 Gas-fired central heating boilers – Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW 급
- IN 626-1:1994+A1:2008 기계류의 안전성 - 기계에서 방출되는 유해 물질로부터 건강에 위험의 감소 - 부품 1: 원칙과 기계 제조 업체의 사양
- IN 626-2:1996+A1:2008 기계류의 안전성 - 기계에서 방출되는 유해 물질로부터 건강에 위험의 감소 - 부품 2: 방법론 검증 절차 선도
- IN 627:1995 Specification for data logging and monitoring of lifts, escalators and passenger conveyors
- IN 631-1:1993 Materials and articles in contact with foodstuffs – Catering containers – Part 1: Dimensions of containers
- IN 631-2:1999 Materials and articles in contact with foodstuffs – Catering containers – Part 2: Dimensions of accessories and supports
- IN 633:1993 Cement-bonded particleboards – Definition and classification
- IN 634-1:1995 Cement-bonded particleboards – Specification – Part 1: 일반 요구 사항
- IN 634-2:2007 Cement-bonded particleboards – Specifications – Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
- IN 635-1:1994 Plywood – Classification by surface appearance – Part 1: General
- IN 635-2:1995 Plywood – Classification by surface appearance – Part 2: 견목
- IN 635-3:1995 Plywood – Classification by surface appearance – Part 3: 침엽수
- IN 635-5:1999 Plywood – Classification by surface appearance – Part 5: Methods for measuring and expressing characteristics and defects
- IN 636:2012 Plywood – Specifications
- IN 637:1994 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
- IN 637:1994/AC:1995 Plastics piping systems – Glass-reinforced plastics components – Determination of the amounts of constituents using the gravimetric method
- IN 639:1994 Common requirements for concrete pressure pipes including joints and fittings
- IN 640:1994 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
- IN 641:1994 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
- IN 642:1994 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
- IN 643:2001 Paper and board – European list of standard grades of recovered paper and board
- IN 643:2001/AC:2002 Paper and board – European list of standard grades of recovered paper and board
- IN 645:1993 Paper and board intended to come into contact with foodstuffs – Preparation of a cold water extract
- IN 646:2006 Paper and board intended to come into contact with foodstuffs – Determination of colour fastness of dyed paper and board
- IN 647:1993 Paper and board intended to come into contact with foodstuffs – Preparation of a hot water extract
- IN 648:2006 Paper and board intended to come into contact with foodstuffs – Determination of the fastness of fluorescent whitened paper and board
- IN 656:1999 Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW 급
- IN 656:1999/A1:2006 Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW 급, but not exceeding 300 kW 급
- IN 677:1998 Gas-fired central heating boilers – Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW 급
