STD-EN 2XXXX

| 1 |

• EN 2:1992 Classification of fires
• EN 2:1992/A1:2004 Classification of fires
• EN 20-1:1992 Wood preservatives – Determination of the protective effectiveness against Lyctus Brunneus (Stephens) – Part 1: Application by surface treatment (laboratory method)
• EN 20-2:1993 Wood preservatives – Determination of the protective effectiveness against Lyctus brunneus (Stephens) – Part 2: Application by impregnation (Laboratory method)
• EN 203-2-1:2005 Gas heated catering equipment – Part 2-1: Specific requirements – Open burners and wok burners
• EN 203-2-10:2007 Gas heated catering equipment – Part 2-10: Specific requirements – Chargrills
• EN 203-2-7:2007 Gas heated catering equipment – Part 2-7: Specific requirements – Salamanders and rotisseries
• EN 203-2-8:2005 Gas heated catering equipment – Part 2-8: Specific requirements – Brat pans and paëlla cookers
• EN 203-2-9:2005 Gas heated catering equipment – Part 2-9: Specific requirements – Solid tops, warming plates and griddles
• EN 206-9:2010 Concrete – Part 9: Additional Rules for Self-compacting Concrete (SCC)
• EN 20693:1991 Dimensions of seam welding wheel blanks (ISO 693:1982)
• EN 20865:1991 Slots in plates for projection welding machines (ISO 865:1981)
• EN 20898-7:1995 Mechanical properties of fasteners – Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992)
• EN 2100:1992 Aerospace series – Aluminium alloy AL-P2014A T4511 – Extruded bars and sections a or D < or = 200 mm
• EN 2101:1991 Aerospace series – Chromic acid anodizing of aluminium and wrought aluminium alloys
• EN 2103-1:1991 Aerospace series – Steel, nickel base and cobalt base alloy remelting stock and castings – Technical specifications – Part 1: General requirements
• EN 2103-2:1991 Aerospace series – Steel, nickel base and cobalt base alloy remelting stock and castings – Technical specification – Part 2: Remelting stock
• EN 2103-3:1991 Aerospace series – Steel, nickel base and cobalt base alloy remelting stock and castings – Technical specifications – Part 3: Pre-production and production castings
• EN 2104:1996 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Hardness 40 IRHD
• EN 21089:1991 Electrode taper fits for spot welding equipment – Dimensions (ISO 1089:1980)
• EN 2115:2009 Aerospace series – Aluminium alloy 2117-T42 – Wire for solid rivets – D = 10 mm
• EN 2116:2009 Aerospace series – Aluminium alloy 2017A-T42 – Wire for solid rivets – D = 10 mm
• EN 2117:2009 Aerospace series – Aluminium alloy AL-P5056A (5056A)-H32 – Wire for solid rivets – D = 10 mm
• EN 212:2003 Wood preservatives – General guidance on sampling and preparation for analysis of wood preservatives and treated timber
• EN 2122:1996 Aerospace series – Washers, flat, in aluminium alloy, anodized or chromated
• EN 2126:1992 Aerospace series – Aluminium alloy AL-P7075-T651 – Plates 6 mm < a < or = 80 mm
• EN 2127:1992 Aerospace series – Aluminium alloy AL-P7075-T73511 – Extruded bars and sections a or D < or = 100 mm
• EN 2128:1992 Aerospace series – Aluminium alloy AL-P7075-T7351 – Drawn bars 6 mm < or = a or D < or = 75 mm
• EN 2130:2001 Aerospace series – Bearings, precision ball in corrosion resisting steel for instruments and equipment – Technical specification
• EN 2131:2001 Aerospace series – Plates in aluminium alloys – Thickness 6 mm < a < 160 mm - Dimensions
• EN 2133:2010 Aerospace series – Cadmium plating of steels with specified tensile strength = 1 450 MPa, copper, copper alloys and nickel alloys
• EN 2134:2001 Aerospace series – Round bars, extruded in aluminium and aluminium alloys – Diameter 10 mm < D < 220 mm - Dimensions
• EN 2138:1999 Aerospace series – Washers, flat, in steel, cadmium plated
• EN 2139:1989 Aerospace series – Washers, flat heat resisting steel
• EN 2143:1992 Aerospace series – Rivets, solid, universal head, in aluminium 1050A, inch based series
• EN 2144:1994 Aerospace series – Rivets, solid, universal head, in aluminium alloy 2117, inch based series
• EN 2145:1994 Aerospace series – Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
• EN 2146:1992 Aerospace series – Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
• EN 2148:1992 Aerospace series – Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
• EN 2149:1996 Aerospace series – Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
• EN 215:2004 Thermostatic radiator valves – Requirements and test methods
• EN 215:2004/A1:2006 Thermostatic radiator valves – Requirements and test methods
• EN 2155-12:1997 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 12: Determination of linear thermal expansion
• EN 2155-13:1993 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 13: Determination of temperature at deflection under load
• EN 2155-14:1993 Aerospace series – Test methods for tranparent materials for aircraft glazing – Part 14: Determination of the 1/10 Vicat softening temperature
• EN 2155-19:1996 Aerospace series – Test methods for transparent materials for aircraft materials for aircraft glazing – Part 19: Determination of craze resistance
• EN 2155-2:1993 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 2: Determination of water absorption
• EN 2155-21:1989 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 21: Determination of resistance to crack propagation (K factor)
• EN 2155-3:1993 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 3: Determination of refractive index
• EN 2155-5:1989 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 5: Determination of visible light transmission
• EN 2155-7:1997 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 7: Determination of optical deviation
• EN 2155-8:1989 Aerospace series – Test methods for transparent materials for aircraft glazing – Part 1: Determination of optical distortion
• EN 2155-9:1989 Aerospace series – Test method for transparent materials for aircraft glazing – Part 9 : Determination of haze
• EN 2157-1:1993 Aerospace series – Steel – Forging stock and forgings – Technical specification – Part 1: General requirements
• EN 2157-2:1993 Aerospace series – Steel – Forging stock and forgings – Technical specification – Part 2: Forging stock
• EN 2157-3:1993 Aerospace series – Steel – Forging stock and forgings – Technical specification – Part 3: Pre-production and production forgings
• EN 2205:2009 Aerospace series – Steel FE-PL1502 (25CrMo4) – 900 MPa = Rm = 1 100 MPa – Bars – De = 40 mm
• EN 2206:2008 Aerospace series – Steel FE-PL1502 (25CrMo4) – 650 MPa = Rm = 850 MPa – Bars – De = 150 mm
• EN 2209:2008 Aerospace series – Steel FE-PL1502 (25CrMo4) – 900 MPa = Rm = 1 100 MPa – Sheets, strips and plates – 0,5 mm = a = 20 mm
• EN 2213:2012 Aerospace series – Steel FE-PL1505 (15CrMoV6) – Air melted – Hardened and tempered – Bars – De = 16 mm – 980 MPa = Rm = 1 180 MPa
• EN 22206:1992 Packaging – Complete, filled transport packages – Identification of parts when testing (ISO 2206:1987)
• EN 22248:1992 Packaging – Complete, filled transport packages – Vertical impact test by dropping (ISO 2248:1985)
• EN 22313:1992 Textile fabrics – Determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery
• EN 22339:1992 Taper pins, unhardened (ISO 2339:1986)
• EN 2234:2012 Aerospace series – Cable, electrical, fire resistant – Technical specification
• EN 22340:1992 Clevis pins without head (ISO 2340:1986)
• EN 22341:1992 Clevis pins with head (ISO 2341:1986)
• EN 2235:2006 Aerospace series – Single and multicore electrical cables, screened and jacketed
• EN 2236:1992 Aerospace series – Pins, headed, close tolerance shank, in alloy steel – Technical specifications
• EN 2240-001:2009 Aerospace series – Lamps, incandescent – Part 001: Technical specification
• EN 2240-002:2009 Aerospace series – Lamps, incandescent – Part 002: Main characteristics
• EN 2240-003:2010 Aerospace series – Lamps, incandescent – Part 003: Lamp, code 44 – Product standard
• EN 2240-004:2010 Aerospace series – Lamps, incandescent – Part 004: Lamp, code 47 – Product standard
• EN 2240-005:2009 Aerospace series – Lamps, incandescent – Part 005: Lamp, code 73 – Product standard
• EN 2240-006:2009 Aerospace series – Lamps, incandescent – Part 006: Lamp, code 73E – Product standard
• EN 2240-007:2009 Aerospace series – Lamps, incandescent – Part 007: Lamp, code 74 – Product standard
• EN 2240-008:2009 Aerospace series – Lamps, incandescent – Part 008: Lamp, code 75 – Product standard
• EN 2240-009:2009 Aerospace series – Lamps, incandescent – Part 009: Lamp, code 83 – Product standard
• EN 2240-010:2010 Aerospace series – Lamps, incandescent – Part 010: Lamp, code 84 – Product standard
• EN 2240-011:2010 Aerospace series – Lamps, incandescent – Part 011: Lamp, code 85 – Product standard
• EN 2240-012:2010 Aerospace series – Lamps, incandescent – Part 012: Lamp, code 95 – Product standard
• EN 2240-013:2010 Aerospace series – Lamps, incandescent – Part 013: Lamp, code 301 – Product standard
• EN 2240-014:2010 Aerospace series – Lamps, incandescent – Part 014: Lamp, code 303 – Product standard
• EN 2240-015:2010 Aerospace series – Lamps, incandescent – Part 015: Lamp, code 304 – Product standard
• EN 2240-016:2010 Aerospace series – Lamps, incandescent – Part 016: Lamp, code 305 – Product standard
• EN 2240-017:2010 Aerospace series – Lamps, incandescent – Part 017: Lamp, code 306 – Product standard
• EN 2240-018:2010 Aerospace series – Lamps, incandescent – Part 018: Lamp, code 307 – Product standard
• EN 2240-019:2010 Aerospace series – Lamps, incandescent – Part 019: Lamp, code 308 – Product standard
• EN 2240-020:2010 Aerospace series – Lamps, incandescent – Part 020: Lamp, code 311 – Product standard
• EN 2240-021:2010 Aerospace series – Lamps, incandescent – Part 021: Lamp, code 313 – Product standard
• EN 2240-022:2010 Aerospace series – Lamps, incandescent – Part 022: Lamp, code 315 – Product standard
• EN 2240-023:2010 Aerospace series – Lamps, incandescent – Part 023: Lamp, code 316 – Product standard
• EN 2240-024:2010 Aerospace series – Lamps, incandescent – Part 024: Lamp, code 327 – Product standard
• EN 2240-025:2010 Aerospace series – Lamps, incandescent – Part 025: Lamp, code 328 – Product standard
• EN 2240-026:2010 Aerospace series – Lamps, incandescent – Part 026: Lamp, code 330 – Product standard
• EN 2240-027:2010 Aerospace series – Lamps, incandescent – Part 027: Lamp, code 334 – Product standard
• EN 2240-028:2010 Aerospace series – Lamps, incandescent – Part 028: Lamp, code 337 – Product standard
• EN 2240-029:2010 Aerospace series – Lamps, incandescent – Part 029: Lamp, code 338 – Product standard
• EN 2240-030:2010 Aerospace series – Lamps, incandescent – Part 030: Lamp, code 345 – Product standard
• EN 2240-031:2010 Aerospace series – Lamps, incandescent – Part 031: Lamp, code 356 – Product standard
• EN 2240-032:2010 Aerospace series – Lamps, incandescent – Part 032: Lamp, code 376 – Product standard
• EN 2240-033:2010 Aerospace series – Lamps, incandescent – Part 033: Lamp, code 377 – Product standard
• EN 2240-034:2010 Aerospace series – Lamps, incandescent – Part 034: Lamp, code 382 – Product standard
• EN 2240-035:2010 Aerospace series – Lamps, incandescent – Part 035: Lamp, code 387 – Product standard
• EN 2240-036:2010 Aerospace series – Lamps, incandescent – Part 036: Lamp, code 388 – Product standard
• EN 2240-037:2010 Aerospace series – Lamps, incandescent – Part 037: Lamp, code 394 – Product standard
• EN 2240-038:2010 Aerospace series – Lamps, incandescent – Part 038: Lamp, code 401 – Product standard
• EN 2240-039:2010 Aerospace series – Lamps, incandescent – Part 039: Lamp, code 600 – Product standard
• EN 2240-040:2010 Aerospace series – Lamps, incandescent – Part 040: Lamp, code 680 – Product standard
• EN 2240-041:2010 Aerospace series – Lamps, incandescent – Part 041: Lamp, code 682 – Product standard
• EN 2240-042:2010 Aerospace series – Lamps, incandescent – Part 042: Lamp, code 683 – Product standard
• EN 2240-043:2010 Aerospace series – Lamps, incandescent – Part 043: Lamp, code 685 – Product standard
• EN 2240-044:2010 Aerospace series – Lamps, incandescent – Part 044: Lamp, code 713 – Product standard
• EN 2240-045:2010 Aerospace series – Lamps, incandescent – Part 045: Lamp, code 714 – Product standard
• EN 2240-046:2010 Aerospace series – Lamps, incandescent – Part 046: Lamp, code 715 – Product standard
• EN 2240-047:2010 Aerospace series – Lamps, incandescent – Part 047: Lamp, code 718 – Product standard
• EN 2240-048:2010 Aerospace series – Lamps, incandescent – Part 048: Lamp, code 718 NPC – Product standard
• EN 2240-049:2010 Aerospace series – Lamps, incandescent – Part 049: Lamp, code 757 – Product standard
• EN 2240-050:2010 Aerospace series – Lamps, incandescent – Part 050: Lamp, code 1064 – Product standard
• EN 2240-051:2011 Aerospace series – Lamps, incandescent – Part 051: Lamp, code 1163 – Product standard
• EN 2240-052:2011 Aerospace series – Lamps, incandescent – Part 052: Lamp, code 1222 – Product standard
• EN 2240-053:2011 Aerospace series – Lamps, incandescent – Part 053: Lamp, code 1308 – Product standard
• EN 2240-054:2011 Aerospace series – Lamps, incandescent – Part 054: Lamp, code 1317 – Product standard
• EN 2240-055:2011 Aerospace series – Lamps, incandescent – Part 055: Lamp, code 1495 – Product standard
• EN 2240-056:2011 Aerospace series – Lamps, incandescent – Part 056: Lamp, code 1506 – Product standard
• EN 2240-057:2011 Aerospace series – Lamps, incandescent – Part 057: Lamp, code 1512 – Product standard
• EN 2240-058:2011 Aerospace series – Lamps, incandescent – Part 058: Lamp, code 1524 – Product standard
• EN 2240-059:2011 Aerospace series – Lamps, incandescent – Part 059: Lamp, code 1591 – Product standard
• EN 2240-060:2011 Aerospace series – Lamps, incandescent – Part 060: Lamp, code 1619 – Product standard
• EN 2240-061:2011 Aerospace series – Lamps, incandescent – Part 061: Lamp, code 1683 – Product standard
• EN 2240-062:2011 Aerospace series – Lamps, incandescent – Part 062: Lamp, code 1810 – Product standard
• EN 2240-063:2011 Aerospace series – Lamps, incandescent – Part 063: Lamp, code 1815 – Product standard
• EN 2240-064:2011 Aerospace series – Lamps, incandescent – Part 064: Lamp, code 1819 – Product standard
• EN 2240-065:2011 Aerospace series – Lamps, incandescent – Part 065: Lamp, code 1820 – Product standard
• EN 2240-066:2011 Aerospace series – Lamps, incandescent – Part 066: Lamp, code 1829 – Product standard
• EN 2240-067:2011 Aerospace series – Lamps, incandescent – Part 067: Lamp, code 1843 – Product standard
• EN 2240-068:2011 Aerospace series – Lamps, incandescent – Part 068: Lamp, code 1864 – Product standard
• EN 2240-069:2011 Aerospace series – Lamps, incandescent – Part 069: Lamp, code 1978 – Product standard
• EN 2240-070:2011 Aerospace series – Lamps, incandescent – Part 070: Lamp, code 2232 – Product standard
• EN 2240-071:2011 Aerospace series – Lamps, incandescent – Part 071: Lamp, code 3011 – Product standard
• EN 2240-072:2011 Aerospace series – Lamps, incandescent – Part 072: Lamp, code 3912 – Product standard
• EN 2240-073:2011 Aerospace series – Lamps, incandescent – Part 073: Lamp, code 4174 – Product standard
• EN 2240-074:2011 Aerospace series – Lamps, incandescent – Part 074: Lamp, code 5086 – Product standard
• EN 2240-075:2011 Aerospace series – Lamps, incandescent – Part 075: Lamp, code 5448 – Product standard
• EN 2240-076:2011 Aerospace series – Lamps, incandescent – Part 076: Lamp, code 5678 – Product standard
• EN 2240-077:2011 Aerospace series – Lamps, incandescent – Part 077: Lamp, code 6832 – Product standard
• EN 2240-078:2011 Aerospace series – Lamps, incandescent – Part 078: Lamp, code 6838 – Product standard
• EN 2240-079:2011 Aerospace series – Lamps, incandescent – Part 079: Lamp, code 6839 – Product standard
• EN 2240-080:2011 Aerospace series – Lamps, incandescent – Part 080: Lamp, code 7007-704 – Product standard
• EN 2240-081:2011 Aerospace series – Lamps, incandescent – Part 081: Lamp, code 7070 – Product standard
• EN 2240-082:2011 Aerospace series – Lamps, incandescent – Part 082: Lamp, code 7079 – Product standard
• EN 2240-083:2011 Aerospace series – Lamps, incandescent – Part 083: Lamp, code 7152 – Product standard
• EN 2240-084:2011 Aerospace series – Lamps, incandescent – Part 084: Lamp, code 7153 – Product standard
• EN 2240-085:2011 Aerospace series – Lamps, incandescent – Part 085: Lamp, code 7265 – Product standard
• EN 2240-086:2011 Aerospace series – Lamps, incandescent – Part 086: Lamp, code 7333 – Product standard
• EN 2240-087:2011 Aerospace series – Lamps, incandescent – Part 087: Lamp, code 7341 – Product standard
• EN 2240-088:2011 Aerospace series – Lamps, incandescent – Part 088: Lamp, code A7512-12 – Product standard
• EN 2240-089:2011 Aerospace series – Lamps, incandescent – Part 089: Lamp, code A7512-24 – Product standard
• EN 2240-090:2011 Aerospace series – Lamps, incandescent – Part 090: Lamp, code 7683 – Product standard
• EN 2240-091:2011 Aerospace series – Lamps, incandescent – Part 091: Lamp, code 7714 – Product standard
• EN 2240-092:2011 Aerospace series – Lamps, incandescent – Part 092: Lamp, code 7715 – Product standard
• EN 2240-093:2011 Aerospace series – Lamps, incandescent – Part 093: Lamp, code 7839 – Product standard
• EN 2240-094:2011 Aerospace series – Lamps, incandescent – Part 094: Lamp, code 8022 – Product standard
• EN 2240-095:2011 Aerospace series – Lamps, incandescent – Part 095: Lamp, code 8552 – Product standard
• EN 2240-096:2011 Aerospace series – Lamps, incandescent – Part 096: Lamp, code 72301-6 – Product standard
• EN 2240-097:2011 Aerospace series – Lamps, incandescent – Part 097: Lamp, code 72601-12 – Product standard
• EN 2240-098:2011 Aerospace series – Lamps, incandescent – Part 098: Lamp, code 416650 – Product standard
• EN 2240-099:2011 Aerospace series – Lamps, incandescent – Part 099: Lamp, code 416700 – Product standard
• EN 22401:1994 Covered electrodes – Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972)
• EN 22401:1994/AC:1994 Covered electrodes – Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972)
• EN 2240-100:2011 Aerospace series – Lamps, incandescent – Part 100: Lamp, code 2078 – Product standard
• EN 2240-101:2011 Aerospace series – Lamps, incandescent – Part 101: Lamp, code 404-02 – Product standard
• EN 2241:2010 Aerospace series – Lamp caps – Dimensions
• EN 2242:2012 Aerospace series – Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
• EN 2243-1:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 1: Single lap shear
• EN 2243-2:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 2: Peel metal-metal
• EN 2243-3:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 3: Peeling test metal-honeycomb core
• EN 2243-4:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 4: Metal-honeycomb core flatwise tensile test
• EN 2243-5:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 5: Ageing tests
• EN 2243-6:2005 Aerospace series – Non-metallic materials – Structural adhesives – Test method – Part 6: Determination of shear stress and shear strain
• EN 2245:2012 Aerospace series – Pipelines for liquids and gases – Definitions
• EN 225-1:2007 Atomizing oil burners – Oil burner pumps and oil burner motors – Connecting dimensions – Part 1: Oil burner pumps
• EN 225-2:2007 Atomizing oil burners – Oil burner pumps and oil burner motors – Connecting dimensions – Part 2: Oil burner motors
• EN 2252:2012 Aerospace series – Steel FE-PL1505 (15CrMoV6) – 1 080 MPa = Rm = 1 250 MPa – Forgings – De = 100 mm
• EN 22553:1994 Welded, brazed and soldered joints – Symbolic representation on drawings (ISO 2553:1992)
• EN 2256:2004 Aerospace series – Aluminium alloy AL-P2618A – T852 – Hand and die forgings – a
• EN 22568:1989 Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
• EN 2257:1997 Aerospace series – Circular tubes for structures in aluminium and aluminium alloys – Diameter 6 mm <= D <= 100 mm - Thickness 1 mm <= a <= 6 mm - Dimensions
• EN 2258:1997 Aerospace series – Circular tubes for fluids in aluminium and aluminium alloys – Diameter 3,2 mm <= D <= 100 mm - Thickness 0,6 mm <= a <= 2,5 mm - Dimensions
• EN 2259:1995 Aerospace series – Silicone rubber (VMQ) – Hardness 50 IRHD
• EN 226:1987 Atomizing oil burners – Connecting dimensions between burners and heat generators
• EN 226:1987/AC1:1987 Atomizing oil burners – Connecting dimensions between burners and heat generators
• EN 2260:1995 Aerospace series – Silicone rubber (VMQ) – Hardness 60 IRHD
• EN 2261:1995 Aerospace series – Silicone rubber (VMQ) – Hardness 70 IRHD
• EN 2262:1995 Aerospace series – Silicone rubber (VMQ/PVMQ) with high tear strength – Hardness 50 IRHD
• EN 2264:1996 Aerospace series – Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS2 lubricated – Classification: 900 MPa (at ambient temperature)/235 °C
• EN 2266-002:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 002: General
• EN 2266-003:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 003: Ink jet printable – Product standard
• EN 2266-005:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 005: UV laser printable – Product standard
• EN 2266-007:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 007: UV laser printable multicore jacketed cable – Product standard
• EN 2267-002:2012 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 002: General
• EN 2267-003:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 003: Ink jet printable – Product standard
• EN 2267-005:2006 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 005: UV laser printable – Product standard
• EN 2267-007:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 007: DMA family, single ink-jet printable and multicore assembly – Product standard
• EN 2267-008:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 008: DM family, single UV laser printable and multicore assembly – Product standard
• EN 2267-009:2013 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 009: DRA family, single and multicore assembly – Product standard
• EN 2267-010:2005 Aerospace series – Cables, electrical, for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 010: DR family, single UV laser printable – Product standard
• EN 22768-1:1993 General tolerances – Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
• EN 22768-2:1993 General tolerances – Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
• EN 228:2012 Automotive fuels – Unleaded petrol – Requirements and test methods
• EN 2282:1992 Aerospace series – Characteristics of aircraft electrical supplies
• EN 2283:2010 Aerospace series – Testing of aircraft wiring
• EN 2284:1991 Aerospace series – Sulphuric acid anodizing of aluminium and wrought aluminium alloys
• EN 2285:1989 Aerospace series – Bushes, plain aluminium alloy with self-lubricating liner – Dimensions and loads
• EN 22857:1989 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches – Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986)
• EN 2286:1989 Aerospace series – Bushes, flanged aluminium alloy with self-lubricating liner – Dimensions and loads
• EN 2287:1989 Aerospace series – Bushes, plain corrosion resisting steel with self-lubricating liner – Dimensions and loads
• EN 22876:1992 Packaging – Complete, filled transport packages – Rolling test (ISO 2876:1985)
• EN 2288:1989 Aerospace series – Bushes, flanged corrosion resisting steel with self-lubricating liner – Dimensions and loads
• EN 2289:1996 Aerospace series – Rod bodies in aluminium alloy for flight controls – Technical specification
• EN 2290-1:1998 Aerospace series – Rod bodies, flight control in aluminium alloy, for adjustable end fittings – Part 1: Dimensions and loads
• EN 23015:1994 Petroleum products – Determination of cloud point (ISO 3015:1992)
• EN 2309:1989 Aerospace series – Hole sizes for solid rivets
• EN 23-1:1978 Packages for washing and cleaning powders – Dimensions and volumes of cartons and drums from fibre board
• EN 2310:1991 Aerospace series – Test methods for the flame resistance rating of non-metallic materials
• EN 2311:2012 Aerospace series – Bushes with self-lubricating liner – Technical specification
• EN 2318:1992 Aerospace series – Aluminium alloy AL-P2024-T3511 – Extruded bars and sections 1,2 mm < or = a or D < or = 150 mm
• EN 232:2012 Baths – Connecting dimensions
• EN 2326:1992 Aerospace series – Aluminium alloy AL-P6082-T6 – Extruded bars and sections a or D < or = 200 mm
• EN 2327:2006 Aerospace series – Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods – Dimensions
• EN 23270:1991 Paints and varnishes and their raw materials – Temperatures and humidities for conditioning and testing (ISO 3270:1984)
• EN 2328:2006 Aerospace series – Washers, tab in corrosion resisting steel, cadmium plated for flight control rods – Dimensions
• EN 2329:1993 Aerospace series – Textile glass fibre preimpregnates – Test method for the determination of mass per unit area
• EN 233:1999 Wallcoverings in roll form – Specification for finished wallpapers, wall vinyls and plastics wallcoverings
• EN 2330:1993 Aerospace series – Textile glass fibre preimpregnates – Test method for the determination of the content of volatile matter
• EN 2331:1993 Aerospace series – Textile glass fibre preimpregnates – Test methods for the determination of the resin and fibre content and mass of fibre per unit area
• EN 23312:1993 Sintered metal materials and hardmetals – Determination of Young modulus (ISO 3312:1987)
• EN 2332:1993 Aerospace series – Textile glass fibre preimpregnates – Test method for the determination of the resin flow
• EN 2334:1997 Aerospace series – Chromic-sulphuric acid pickle of aluminium and aluminium alloys
• EN 2335:2005 Aerospace series – Bearings, spherical plain in corrosion resisting steel without assembly slot – Dimensions and loads
• EN 2336:2005 Aerospace series – Bearings, spherical plain in steel with assembly slots – Dimensions and loads
• EN 2337:2006 Aerospace series – Spherical plain bearings – Technical specification
• EN 2338:2001 Aerospace series – Sheets, hot rolled in titanium and titanium alloys – Thickness 0,8 mm < = a < = 6 mm - Dimensions
• EN 2339:2001 Aerospace series – Sheets, cold rolled in titanium and titanium alloys – Thickness 0,2 mm < = a < = 6 mm - Dimensions
• EN 234:1989 Wallcoverings in roll form – Specification for wallcoverings for subsequent decoration
• EN 234:1989/A1:1996 Wallcoverings in roll form – Specification for wallcoverings for subsequent decoration
• EN 234:1989/AC:1997 Wallcoverings in roll form – Specification for wallcoverings for subsequent decoration
• EN 2344:2001 Aerospace series – Round bars, machined in heat resisting alloys – Diameter 10 mm < = D < = 180 mm - Dimensions
• EN 2346-002:2006 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between – 65 °C and 260 °C – Part 002: General
• EN 2346-003:2006 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between – 65 °C and 260 °C – Part 003: DL family, single core – Product standard
• EN 2346-004:2006 Aerospace series – Cable, electrical, fire resistant – Operating temperatures between – 65 C and 260 C – Part 004: DN family, single UV laser printable and multicore assembly – Light weight – Product standard
• EN 2348:1988 Aerospace series – Control cable assemblies – Technical specification
• EN 2349-201:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 201: Visual inspection
• EN 2349-202:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 202: Examination of dimensions and mass
• EN 2349-301:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 301: Pick-up and drop-out voltage
• EN 2349-302:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 302: Insulation resistance
• EN 2349-303:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 303: Dielectric strength
• EN 2349-304:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 304: Operate and release time
• EN 2349-305:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 305: Bounce time
• EN 2349-306:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 306: Overload d.c. and a.c.
• EN 2349-307:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 307: Contact voltage drop
• EN 2349-308:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 308: Coil current
• EN 2349-309:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 309: Exported spikes
• EN 2349-310:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 310: Rupture
• EN 2349-312:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 312: Electrical service life – Mixed load
• EN 2349-316:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 316: Mechanical life (Endurance at reduced load)
• EN 2349-317:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 317: Service life of coil switching device
• EN 2349-318:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature
• EN 2349-319:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 319: Miss test
• EN 2349-402:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 402: Corrosion, salt spray
• EN 2349-405:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 405: Fluid resistance
• EN 2349-407:2006 Aerospace series – Requirements and test procedures for relays and contactors – Part 407: Cold/low pressure and moist heat
• EN 2349-409:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 409: Ozone resistance
• EN 2349-410:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 410: Mould
• EN 2349-411:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 411: Temperature change
• EN 2349-412:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 412: Seal
• EN 2349-413:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 413: Vibration, sinusoidal and random
• EN 2349-414:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 414: Mechanical shock
• EN 2349-415:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 415: Acceleration
• EN 2349-601:2007 Aerospace series – Requirements and test procedures for relays and contactors – Part 601: Compass safety distance
• EN 235:2001 Wallcoverings – Vocabulary and symbols
• EN 2350:1990 Aerospace series – Circuit breakers – Technical specification
• EN 2353:1988 Aerospace series – Turnbarrels, control cable in corrosion resisting steel – Dimensions and loads
• EN 2354:1988 Aerospace series – Eye-ends, threaded, control cable in corrosion resisting steel – Dimensions and loads
• EN 2355:1988 Aerospace series – Fork-ends, threaded, control cable in corrosion resisting steel – Dimensions and loads
• EN 2356:1988 Aerospace series – Fork-ends threaded, control cable for rolling bearings in corrosion resisting steel – Dimensions and loads
• EN 2357:1988 Aerospace series – Stud-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
• EN 2358:1988 Aerospace series – Eye-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
• EN 2359:1988 Aerospace series – Fork-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
• EN 2360:1988 Aerospace series – Fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable – Dimensions and loads
• EN 2361:1988 Aerospace series – Ball-ends, double shank in corrosion resisting steel swaged on type, control cable – Dimensions and loads
• EN 2362:1988 Aerospace series – Ball-ends in corrosion resisting steel swaged on type, control cable – Dimensions and loads
• EN 2363:1988 Aerospace series – Locking clips for turnbuckles of control cables – Dimensions
• EN 2364:1989 Aerospace series – Pins, shear, headed, close tolerance
• EN 2365:1989 Aerospace series – Collars, aluminium alloy
• EN 2367:1989 Aerospace series – Split pins in steel EN 2573
• EN 237:2004 Liquid petroleum products – Petrol – Determination of low lead concentrations by atomic absorption spectrometry
• EN 2374:1991 Aerospace series – Glass fibre reinforced mouldings and sandwich composites – Production of test panels
• EN 2375:1992 Aerospace series – Resin preimpregnated materials – Production batch sampling procedure
• EN 2377:1989 Aerospace series – Glass fibre reinforced plastics – Test method – Determination of apparent interlaminar shear strength
• EN 2378:1995 Aerospace series – Fibre reinforced plastics – Determination of water absorption by immmersion
• EN 238:1996 Liquid petroleum products – Petrol – Determination of the benzene content by infrared spectrometry
• EN 238:1996/A1:2003 Liquid petroleum products – Petrol – Determination of the benzene content by infrared spectrometry
• EN 2381:1992 Aerospace series – Aluminium alloy AL-P7009-T7452 – Hand forgings 40 mm < or = a < or = 150 mm
• EN 2384:1992 Aerospace series – Aluminium alloy AL-P2014A T6511 – Extruded bars and sections a or D < or = 150 mm
• EN 2385:1992 Aerospace series – Aluminium alloy AL-P7009-T74511 – Extruded bars and sections a or D < or = 125 mm
• EN 23878:1993 Hardmetals – Vickers hardness test (ISO 3878:1983)
• EN 23909:1993 Hardmetals – Determination of cobalt – Potentiometric method (ISO 3909:1976)
• EN 23923-2:1993 Metallic powders – Determination of apparent density – Part 2: Scott volumeter method (ISO 3923-2:1981)
• EN 2395:2005 Aerospace series – Aluminium alloy AL-P2014A-T4 or T42 – Sheet and strip – 0,4 mm<="" td="">
• EN 23964:1989 Dentistry – Dental handpieces – Coupling dimensions (ISO 3964:1982)
• EN 23964:1989/AC1:1990 Dentistry – Dental handpieces – Coupling dimensions (ISO 3964:1982)
• EN 2398:2008 Aerospace series – Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) – Rm = 900 MPa – Bars for machined bolts – D = 25 mm
• EN 2399:2008 Aerospace series – Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) – Rm = 900 MPa – Bars for forged bolts – D = 25 mm
• EN 23995:1993 Metallic powders – Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
• EN 24003:1993 Permeable sintered metal materials – Determination of bubble test pore size (ISO 4003:1977)
• EN 24006:1993 Measurement of fluid flow in closed conduits – Vocabulary and symbols (ISO 4006:1991)
• EN 24015:1991 Hexagon head bolts – Product grade B – Reduced shank (Shank diameter = pitch diameter) (ISO 4015:1979)
• EN 241:2000 Liquid petroleum products – Determination of sodium content – Atomic absorption spectrometric method
• EN 2413:1995 Aerospace series – Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature) / 235 °C
• EN 24159:1989 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method (ISO 4159:1978, ed. 1)
• EN 24159:1989/AC1:1989 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method (ISO 4159:1978, ed. 1)
• EN 24178:1992 Complete, filled transport packages – Distribution trials – Information to be recorded (ISO 4178:1980)
• EN 24185:1993 Measurement of liquid flow in closed conduits – Weighing method (ISO 4185:1980)
• EN 24185:1993/AC:1993 Measurement of liquid flow in closed conduits – Weighing method (ISO 4185:1980)
• EN 2422:2005 Aerospace series – Aluminium alloy AL-P2124-T351 – Plate – 25 mm<="" td="">
• EN 24230:1989 Hand- and machine-operated circular screwing dies for taper pipe threads – R series (ISO 4230:1987)
• EN 24231:1989 Hand- and machine-operated circular screwing dies for parallel pipe threads – G series (ISO 2431:1987)
• EN 24231:1989/AC1:1989 Hand- and machine-operated circular screwing dies for parallel pipe threads – G series (ISO 4231:1987)
• EN 2424:2008 Aerospace series – Marking of aerospace products
• EN 24260:1994 Petroleum products and hydrocarbons – Determination of sulfur content – Wickbold combustion method (ISO 4260:1987)
• EN 2428:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 50 IRHD
• EN 2429:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 60 IRHD
• EN 2430:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 70 IRHD
• EN 2431:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 80 IRHD
• EN 2432:1995 Aerospace series – Ethylene-propylene rubber (EPM/EPDM) – Hardness 90 IRHD
• EN 2434-001:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 001: Basic requirements
• EN 2434-002:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 002: High chemical resistance
• EN 2434-003:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 003: Flexible and high fluid resistance for interior
• EN 2434-004:2010 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 004: High flexibility
• EN 2434-005:2006 Aerospace series – Paints and varnishes – Two component cold curing polyurethane finish – Part 005: High flexibility and chemical agent resistance for military application
• EN 2435-001:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 001: Minimum requirements
• EN 2435-002:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 002: High corrosion resistance
• EN 2435-003:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 003: High corrosion and fluid resistance
• EN 2435-004:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 004: High corrosion and fluid resistance with surface preparation tolerance
• EN 2435-005:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromated two component cold curing primer – Part 005: High corrosion resistance for military application
• EN 2436-001:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 001: Basic requirements
• EN 2436-002:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 002: High corrosion resistance
• EN 2436-003:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 003: High corrosion and fluid resistance
• EN 2436-004:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 004: High corrosion and fluid resistance with surface preparation tolerance
• EN 2436-005:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 005: For exterior use with surface preparation tolerance
• EN 2436-006:2006 Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing epoxy primer – Part 006: High corrosion resistance for military application
• EN 2437:2001 Aerospace series – Chromate conversion coatings (yellow) for aluminium and aluminium alloys
• EN 2438:2008 Aerospace series – Steel FE-PL2102 (35NiCr6) – 900 MPa = Rm = 1 100 MPa – Bars – De = 40 mm
• EN 2439:2009 Aerospace series – Steel FE-PL2102 (34NiCr6) – 900 MPa = Rm = 1 100 MPa – Forgings – De = 40 mm
• EN 2446:2008 Aerospace series – Steel FE-PL1503 (35CrMo4) – 1 100 MPa = Rm = 1 300 MPa – Bars – De = 25 mm
• EN 2448:2008 Aerospace series – Steel FE-PL1503 (35CrMo4) – 900 MPa = Rm = 1 100 MPa – Bars – De = 40 mm
• EN 24489:1993 Sintered hardmetals – Sampling and testing (ISO 4489:1978)
• EN 24491-1:1993 Metallic powders – Determination of oxygen content by reduction methods – Part 1: General guidelines (ISO 4491-1:1989)
• EN 24496:1993 Metallic powders – Determination of acid insoluble content in iron, copper, tin and bronze powders (ISO 4496:1978)
• EN 24497:1993 Metallic powders – Determination of particle size by dry sieving (ISO 4497:1983)
• EN 24501:1993 Hardmetals – Determination of titanium – Photometric peroxide method (ISO 4501:1978)
• EN 24503:1993 Hardmetals – Determination of contents of metallic elements by X-ray fluorescence – Fusion method (ISO 4503:1978)
• EN 24505:1993 Hardmetals – Metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
• EN 24506:1993 Hardmetals – Compression test (ISO 4506:1979)
• EN 246:2003 Sanitary tapware – General specifications for flow rate regulators
• EN 2460:2009 Aerospace series – Steel FE-PM1901 (X12Cr13) – 600 MPa = Rm = 800 MPa – Bars – De = 70 mm
• EN 2461:2009 Aerospace series – Steel FE-PM1901 (X12Cr13) – 600 MPa = Rm = 800 MPa – Forgings – De = 70 mm
• EN 2465:2007 Aerospace series – Steel FE-PA3901 (X2CrNi18-9) – Softened – 450 MPa = Rm = 680 MPa – Bar for machining – 4 mm = De = 100 mm
• EN 2466:2009 Aerospace series – Steel FE-PA3901 (X2CrNi19-11) – Softened – Forgings – De = 100 mm
• EN 2467:2007 Aerospace series – Steel FE-PA3901 (X2CrNi18-9) – Air melted – Softened – Plate, sheet and strip – 0,4 mm = a = 20 mm – 520 MPa = Rm = 670 MPa
• EN 2469:2007 Aerospace series – Steel FE-PA3901 (X1CrNi18-10) – Air melted – Softened – Wires – 0,4 mm = D = 12,5 mm – 450 MPa = Rm = 650 MPa
• EN 247:1997 Heat exchangers – Terminology
• EN 2478:2008 Aerospace series – Steel FE-PL2107 (30NiCrMo16) – 1 220 MPa = Rm = 1 370 MPa – Bars – De = 40 mm
• EN 248:2002 Sanitary tapware – General specification for electrodeposited coatings of Ni-Cr
• EN 2480:2008 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 250 MPa = Rm = 1 400 MPa – Bars – De = 75 mm
• EN 2481:2010 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 250 MPa = Rm = 1 400 MPa – Forgings – De = 75 mm
• EN 2482:2010 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 100 MPa = Rm = 1 300 MPa – Bars – De = 100 mm
• EN 24829-1:1990 Steel and cast iron – Determination of total silicon content – Reduced molybdosilicate spectrophotometric method – Part 1: Silicon content between 0,05 and 1% (ISO 4829-1:1986)
• EN 24829-1:1990/AC:1991 Steel and cast iron – Determination of total silicon content – Reduced molybdosilicate spectrophotometric method – Part 1: Silicon content between 0,05 and 1% (ISO 4829-1:1986)
• EN 24829-2:1990 Steel and cast iron – Determination of total silicon content – Reduced molybdosilicate spectrophotometric method – Part 2: Silicon content between 0,01 and 0,05% (ISO 4829-2:1988)
• EN 24829-2:1990/AC:1991 Steel and cast iron – Determination of total silicon content – Reduced molybdosilicate spectrophotometric method – Part 2: Silicon content between 0,01 and 0,05% (ISO 4829-2:1988)
• EN 2483:2010 Aerospace series – Steel FE-PL2108 (36NiCrMo16) – 1 100 MPa = Rm = 1 300 MPa – Forgings – De = 100 mm
• EN 2484:1989 Aerospace series – Microfilming of drawings – Aperture card for 35 mm microfilm
• EN 2486:2005 Aerospace series – Aluminium alloy AL-P2618A – Forging stock
• EN 24869-1:1992 Acoustics – Hearing protectors – Subjective method for the measurement of sound attenuation (ISO 4869-1:1990)
• EN 24883:1993 Hardmetals – Determination of contents of metallic elements by X-ray fluorescence – Solution method (ISO 4883:1978)
• EN 24884:1993 Hardmetals – Sampling and testing of powders using sintered test pieces (ISO 4884:1978)
• EN 2489:1995 Aerospace series – Fibre reinforced plastics – Determination of the action of test fluids
• EN 249:2010 Sanitary appliances – Shower trays made from crosslinked cast acrylic sheets – Requirements and test methods
• EN 2491:2011 Aerospace series – Molybdenum disulphide dry lubricants – Coating methods
• EN 24935:1991 Steel and iron – Determination of sulphur content – Infrared absorption method after combustion in an induction furnace (ISO 4935:1989)
• EN 24937:1990 Steel and iron – Determination of chromium content – Potentiometric or visual method (ISO 4937:1986)
• EN 24937:1990/AC:1991 Steel and iron – Determination of chromium content – Potentiometric or visual method (ISO 4937:1986)
• EN 24938:1990 Steel and iron – Determination of nickel content – Gravimetric or titrimetric method (ISO 4938:1988)
• EN 24938:1990/AC:1991 Steel and iron – Determination of nickel content – Gravimetric or titrimetric method (ISO 4938:1988)
• EN 24943:1990 Chemical analysis of ferrous metal – Determination of copper content – Flame atomic absorption spectrometric method (ISO 4943:1985)
• EN 24943:1990/AC:1991 Steel and cast iron – Determination of copper content – Flame atomic absorption spectrometric method (ISO 4943:1985)
• EN 24946:1990 Determination of copper content in steel and cast iron
• EN 24946:1990/AC:1991 Steel and cast iron – Determination of copper content – 2,2′diquinolyl spectrophotometric method (ISO 4946:1984)
• EN 24947:1991 Steel and cast iron – Determination of vanadium content – Potentiometric titration method (ISO 4947:1986)
• EN 2495:1990 Aerospace series – Single-pole circuit breakers temperature compensated rated currents up to 25 A – Product standard
• EN 2497:1989 Aerospace series – Dry abrasive blasting of titanium and titanium alloys
• EN 2498:1990 Aerospace series – Rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank – Dimensions and loads
• EN 2499:1987 Aerospace series – Computer output microfiche (COM) – A6 microfiche
• EN 250:2000 Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing, marking
• EN 250:2000/A1:2006 Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing, marking
• EN 2501:1988 Aerospace series – Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring – Dimensions and loads
• EN 2501:1988/AC1:1988 Aerospace series – Bearings, spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring – Dimensions and loads
• EN 251:2012 Shower trays – Connecting dimensions
• EN 2511:2005 Aerospace series – Aluminium alloy AL-P7075-T7351 – Plate -6 mm<="" td="">
• EN 2515:1990 Aerospace series – Rod ends, adjustable single fork and threaded shank – Dimensions and loads
• EN 2516:1997 Aerospace series – Passivation of corrosion resisting steels and decontamination of nickel base alloys
• EN 25184:1994 Straight resistance spot welding electrodes (ISO 5184:1979)
• EN 252:1989 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact
• EN 252:1989/AC1:1989 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact
• EN 253:2009+A1:2013 District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
• EN 2535:2011 Aerospace series – Vacuum deposition of cadmium
• EN 2536:1995 Aerospace series – Hard anodizing of aluminium alloys
• EN 2542:2008 Aerospace series – Steel FE-PL1502 (25CrMo4) – Annealed – Bar and wire – De = 40 mm – For prevailing torque nuts
• EN 2543:2009 Aerospace series – Steel FE-PL1502 (25CrMo4) – Annealed – Sheet and strip – 0,3 mm = a = 2 mm – For prevailing torque nuts
• EN 2544:1987 Aerospace series – Representation of rivets on drawings for aerospace equipment
• EN 2545-1:1995 Aerospace series – Titanium and titanium alloy remelting stock and castings – Technical specification – Part 1: General requirements
• EN 2545-2:1995 Aerospace series – Titanium and titanium alloy remelting stock and castings – Technical specification – Part 2: Remelting stock
• EN 2545-3:1995 Aerospace series – Titanium and titanium alloy remelting stock and castings – Technical specification – Part 3: Pre-production and production castings
• EN 2546:2006 Aerospace series – Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods – Dimensions
• EN 2547:1987 Aerospace series – Filming of documents – Microfilm 105 mm (microfiche A6)
• EN 2549:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series – Classification: 1 100 MPa (at ambient temperature) / 315 °C
• EN 2550:1992 Aerospace series – Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series
• EN 2551:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series
• EN 2552:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
• EN 2553:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series
• EN 2555:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series
• EN 2556:1992 Aerospace series – Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
• EN 2557:1997 Aerospace series – Carbon fibre preimpregnates – Determination of mass per unit area
• EN 2558:1997 Aerospace series – Carbon fibre preimpregnates – Determination of the volatile content
• EN 25580:1992 Non-destructive testing – Industrial radiographic illuminators – Minimum requirements (ISO 5580:1985)
• EN 2559:1997 Aerospace series – Carbon fibre preimpregnates – Determination of the resin and fibre content and the mass of fibre per unit area
• EN 2560:1998 Aerospace series – Carbon fibre preimpregnates – Determination of the resin flow
• EN 2561:1995 Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates – Tensile test parallel to the fibre direction
• EN 2562:1997 Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates – Flexural test parallel to the fibre direction
• EN 2563:1997 Aerospace series – Carbone fibre reinforced plastics – Unidirectional laminates – Determination of the apparent interlaminar shear strength
• EN 2564:1998 Aerospace series – Carbon fibre laminates – Determination of the fibre, resin and void contents
• EN 2565:2013 Aerospace series – Preparation of carbon fibre reinforced resin panels for test purposes
• EN 25663:1993 Water quality – Determination of Kjeldahl nitrogen – Method after mineralization with selenium (ISO 5663:1984)
• EN 2569:1991 Aerospace series – Control cable fittings and turnbarrels – Technical specification
• EN 257:2010 Mechanical thermostats for gas-burning appliances
• EN 2570:1996 Aerospace series – Nickel-cadmium batteries – Technical specification
• EN 2573:2007 Aerospace series – Steel FE-PA3601 (X6CrNiTi18-10) – Softened – Rm = 780 MPa – Wire – 0,25 mm = De = 3 mm
• EN 2574:1990 Aerospace series – Welds – Information on drawings
• EN 2575:1989 Aerospace series – Filming of documents – 16 mm microfilm
• EN 25754:1993 Sintered metal materials, excluding hardmetals – Unnotched impact test piece (ISO 5754:1978)
• EN 25813:1992 Water quality – Determination of dissolved oxygen – Iodometric method (ISO 5813:1983)
• EN 25822:1991 Spot welding equipment – Taper plug gauges and taper ring gauges (ISO 5822:1988)
• EN 25827:1992 Spot welding – Electrode back-ups and clamps (ISO 5827:1983)
• EN 2583:1997 Aerospace series – Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) – Classification: 1 275 MPa (at ambient temperature)/650°C – Technical specification
• EN 2584:2001 Aerospace series – Bearings, spherical plain in corrosion resisting steel with self-lubricating liner – Narrow series – Elevated load at ambient temperature – Dimensions and loads
• EN 2585:2001 Aerospace series – Bearings, spherical plain in corrosion resisting steel with self-lubricating liner – Wide series – Elevated load at ambient temperature – Dimensions and loads
• EN 2586:1991 Aerospace series – Washers, lock for flight control rods – Dimensions
• EN 2587:1990 Aerospace series – Rod ends adjustable double fork and threaded shank – Dimensions and loads
• EN 2588:2006 Aerospace series – Bearings, spherical plain in corrosion resisting steel with assembly slots – Dimensions and loads
• EN 2591:1992 Aerospace series – Elements of electrical and optical connection – Test methods – General
• EN 259-1:2001 Wallcoverings in roll form – Heavy duty wallcoverings – Part 1: Specifications
• EN 2591-100:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 100: General
• EN 2591-101:1994 Aerospace series – Elements of electrical and optical connection – Test methods – Part 101: Visual examination
• EN 2591-102:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 102: Examination of dimensions and mass
• EN 2591-201:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 201: Contact resistance – Low level
• EN 2591-202:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 202: Contact resistance at rated current
• EN 2591-203:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 203: Electrical continuity at microvolt level
• EN 2591-204:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 204: Discontinuity of contacts in the microsecond range
• EN 2591-205:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 205: Housing (shell) electrical continuity
• EN 2591-206:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 206: Measurement of insulation resistance
• EN 2591-207:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 207: Voltage proof test
• EN 2591-208:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 208: Temperature rise due to rated current
• EN 2591-209:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 209: Current temperature derating
• EN 2591-210:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 210: Electrical overload
• EN 2591-211:2002 Aerospaces series – Elements of electrical and optical connection – Test Methods – Part 211: Capacitance
• EN 2591-212:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 212: Surface transfer impedance
• EN 2591-213:1997 Aeropsace series – Elements of electrical and optical connection – Test methods – Part 213: Shielding effectiveness from 100 MHz to 1 GHz
• EN 2591-214:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 214: Lightning strike, current and voltage pulse
• EN 2591-216:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 216: Engagement depth of contacts
• EN 2591-217:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 217: Voltage drop under specified current for terminal lugs and in-line splices
• EN 2591-218:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling
• EN 2591-219:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 219: Voltage strength for insulated terminal lugs and in-line splices
• EN 2591-220:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 220: Contact/conductor joint ageing by current and temperature cycling
• EN 2591-221:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 221: Voltage Standing Wave Ratio (VSWR)
• EN 2591-222:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 222: Insertion Loss (I.L.)
• EN 2591-223:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 223: Measurement of characteristic impedance of a coaxial connector or contact
• EN 2591-224:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 224: RF leakage
• EN 2591-225:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 225: RF high potential withstanding voltage
• EN 2591-226:2007 Aerospace series – Elements of electrical and optical connection – Test methods – Part 226: Corona level
• EN 2591-301:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 301: Endurance at temperature
• EN 2591-302:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 302: Climatic sequence
• EN 2591-303:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 303: Cold/low pressure and damp heat
• EN 2591-304:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 304: Damp heat steady state
• EN 2591-305:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 305: Rapid change of temperature
• EN 2591-306:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 306: Mould growth
• EN 2591-307:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 307: Salt mist
• EN 2591-308:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 308: Sand and dust
• EN 2591-309:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 309: Dry heat
• EN 2591-310:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 310: Cold
• EN 2591-311:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 311: Low air pressure
• EN 2591-312:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 312: Air leakage
• EN 2591-313:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 313: Artificial rain
• EN 2591-314:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 314: Immersion at low air pressure
• EN 2591-315:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 315: Fluid resistance
• EN 2591-316:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 316: Ozone resistance
• EN 2591-317:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 317: Flammability
• EN 2591-318:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 318: Fire-resistance
• EN 2591-319:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 319: Gastightness of solderless wrapped connections
• EN 2591-320:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 320: Simulated solar radiation at ground level
• EN 2591-321:1997 Aerospace series – Elements of electrical and optical connection – Test methods – Part 321: Damp heat, cyclic test
• EN 2591-322:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 322: Hermeticity
• EN 2591-323:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 323: Thermal shock
• EN 2591-324:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 324: Interfacial sealing
• EN 2591-325:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 325: Ice resistance
• EN 2591-401:1996 Aerospace series – Elements of electrical and optical connection – Test methods – Part 401: Acceleration, steady state
• EN 2591-402:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 402: Shock
• EN 2591-403:2012 Aerospace series – Elements of electrical and optical connection – Test methods – Part 403: Sinusoidal and random vibration
• EN 2591-404:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 404: Transverse load
• EN 2591-405:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 405: Axial load
• EN 2591-406:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 406: Mechanical endurance
• EN 2591-407:1999 Aerospace series – Elements of electrical and optical connection – Test methods – Part 407: Durability of contact retention system and seals
• EN 2591-408:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 408: Mating and unmating forces
• EN 2591-409:1999 Aerospace series – Elements of electrical and optical connection – Test methods – Part 409: Contact retention in insert
• EN 2591-410:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 410: Insert retention in housing (axial)
• EN 2591-411:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 411: Insert retention in housing (torsional)
• EN 2591-412:1999 Aerospace series – Elements of electrical and optical connection – Test methods – Part 412: Contact insertion and extraction forces
• EN 2591-413:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 413: Holding force of grounding spring system
• EN 2591-414:1998 Aerospace series – Elements of electrical and optical connection – Test methods – Part 414: Unmating of lanyard release connectors
• EN 2591-415:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 415: Test probe damage (female contacts)
• EN 2591-416:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 416: Contact bending strength
• EN 2591-417:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 417: Tensile strength (crimped connection)
• EN 2591-418:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 418: Gauge insertion/extraction forces (female contacts)
• EN 2591-419:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 419: Stability of male contacts in insert
• EN 2591-420:2006 Aerospace series – Elements of electrical and optical connection – Test methods – Part 420: Mechanical strength of rear accessories
• EN 2591-421:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 421: Free fall
• EN 2591-422:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 422: Locking wire hole strength
• EN 2591-423:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 423: Connector rear accessories thread strength
• EN 2591-424:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 424: Stripping force, solderless wrapped connections
• EN 2591-425:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 425: Unwrapping capability, solderless wrapped connections
• EN 2591-426:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 426: Contact retention system effectiveness
• EN 2591-427:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 427: Robustness of protective cover attachment
• EN 2591-428:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 428: Sinusoidal vibrations with passage of current for crimped terminal lugs
• EN 2591-501:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 501: Soft solderability
• EN 2591-502:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 502: Restricted entry
• EN 2591-503:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 503: Contact deformation after crimping
• EN 2591-505:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 505: Contact protection effectiveness (scoop-proof)
• EN 2591-506:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 506: Use of tools
• EN 2591-507:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 507: Plating porosity
• EN 2591-508:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 508: Measurement of thickness of coating on contacts
• EN 2591-509:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 509: Adhesion of coating on contacts
• EN 2591-512:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell
• EN 2591-513:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 513: Magnetic permeability
• EN 2591-514:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 514: Solderability of contacts with self-contained solder and flux
• EN 2591-515:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 515: Hydrolytic stability
• EN 2591-601:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 601: Optical elements – Insertion loss
• EN 2591-602:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 602: Optical elements – Variation of attenuation and optical discontinuity
• EN 2591-603:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 603: Optical elements – Change of power distribution
• EN 2591-604:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 604: Optical elements – Cleaning capability of optical face
• EN 2591-605:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 605: Optical elements – Return loss
• EN 2591-606:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 606: Optical elements – Crosstalk
• EN 2591-607:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 607: Optical elements – Immunity to ambient light coupling
• EN 2591-609:2005 Aerospace series – Elements of electrical and optical connection – Test methods – Part 609: Optical elements – Effectiveness of cable attachment – Cable cyclic flexing
• EN 2591-610:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 610: Optical elements – Effectiveness of cable attachment – Cable pulling
• EN 2591-6101:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6101: Optical elements – Visual examination
• EN 2591-611:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 611: Optical elements – Effectiveness of cable attachment – Cable torsion
• EN 2591-612:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 612: Optical elements – Effectiveness of cable attachment – Cable axial compression
• EN 2591-613:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 613: Optical elements – Impact test
• EN 2591-614:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 614: Optical elements – Connector radial compression
• EN 2591-615:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 615: Optical elements – Connection integrity at temperature
• EN 2591-617:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 617: Optical elements – Temperature cycling
• EN 2591-6301:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6301: Optical elements – Endurance at temperature
• EN 2591-6303:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6303: Optical elements – Cold/low pressure and damp heat
• EN 2591-6305:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6305: Optical elements – Rapid change of temperature
• EN 2591-6306:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6306: Optical elements – Mould growth
• EN 2591-6307:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6307: Optical elements – Salt mist
• EN 2591-6314:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6314: Optical elements – Immersion at low air pressure
• EN 2591-6315:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6315: Optical elements – Fluid resistance
• EN 2591-6316:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6316: Optical elements – Ozone resistance
• EN 2591-6317:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6317: Optical elements – Flammability
• EN 2591-6318:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6318: Optical elements – Fire resistance
• EN 2591-6321:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6321: Optical elements – Damp heat, cyclic test
• EN 2591-6323:2002 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6323: Optical elements – Thermal shock (Hermetically sealed devices)
• EN 2591-6324:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6324: Optical elements – Interfacial sealing
• EN 2591-6401:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6401: Optical elements – Acceleration steady state
• EN 2591-6402:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6402: Optical elements – Shock
• EN 2591-6403:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6403: Optical elements – Vibrations
• EN 2591-6404:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6404: Optical elements – Transverse load
• EN 2591-6405:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6405: Optical elements – Axial load
• EN 2591-6406:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6406: Optical elements – Mechanical endurance
• EN 2591-6414:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6414: Optical elements – Unmating of lanyard release optical connection elements
• EN 2591-6415:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 6415: Optical elements – Test probe damage
• EN 2591-701:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 701: Electrical elements – Measurement of open circuit impedance of couplers
• EN 2591-702:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 702: Electrical elements – Measurement of signal distortion of couplers
• EN 2591-703:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 703: Electrical elements – Common mode rejection of couplers
• EN 2591-704:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 704: Electrical elements – Measurement of turns ratio on a transformer used in a coupler
• EN 2591-705:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 705: Electrical elements – Measurement of stub input impedance of couplers
• EN 2591-706:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 706: Electrical elements – Transmission test
• EN 2591-707:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 707: Electrical elements – Measurement of characteristic impedance of a bus or a stub terminator
• EN 2591-708:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 708: Electrical elements – Measurement of surface transfer impedance of couplers
• EN 2591-709:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 709: Electrical elements – Tensile strength of couplers
• EN 2591-7301:2001 Aerospace series – Elements of electrical and optical connection – Test methods – Part 7301: Electrical elements – Temperature endurance of couplers
• EN 2592:1990 Aerospace series – Three-pole circuit breakers temperature compensated rated currents up to 25 A – Product standard
• EN 259-2:2001 Wallcoverings in roll form – Heavy duty wallcoverings – Part 2: Determination of impact resistance
• EN 2596:2006 Aerospace series – Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods – Dimensions
• EN 25967:1989 Taps and thread cutting – Nomenclature of the main types and terminology (ISO 5967:1981)
• EN 25968:1989 Circular screwing dies – Terminology (ISO 5968:1981)
• EN 2597:1998 Aerospace series – Carbon fibre reinforced plastics – Unidirectional laminates – Tensile test perpendicular to the fibre direction
• EN 25978:1993 Rubber- or plastics-coated fabrics – Determination of blocking resistance (ISO 5978:1990)
• EN 2599:2001 Aerospace series – Strips in aluminium and aluminium alloys – Thickness 0,25 mm < a < 3,2 mm - Dimensions
• EN 26:1997 Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)
• EN 26:1997/A1:2000 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
• EN 26:1997/A2:2004 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
• EN 26:1997/A3:2006 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
• EN 26:1997/AC:1998 Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)
• EN 2601:1996 Aerospace series – Fork ends, adjustable – Technical specification
• EN 2602:2005 Aerospace series – Ports for adaptors, threaded, with lockring – Geometric configuration
• EN 2603:2005 Aerospace series – Port ends for adaptors, threaded, with lockring – Geometric configuration
• EN 2604:2005 Aerospace series – 8° 30′ interface for adaptors, threaded, with lockring – Geometric configuration
• EN 2605:2005 Aerospace series – 24° interface for adaptors, threaded, with lockring – Geometric configuration
• EN 2606:2009 Aerospace series – 60° interface for adaptors, threaded, with lockring – Geometric configuration
• EN 2607:2005 Aerospace series – O-rings for adaptors, threaded, with lockring – Survey
• EN 2608:2005 Aerospace series – Installation and removal requirements for 8° 30′ adaptors, threaded, with lockring
• EN 2609:1988 Aerospace series – Turnbarrels, control cable in copper-zinc alloys – Dimensions and loads
• EN 26157-1:1991 Fasteners – Surface discontinuities – Part 1: Bolts, screws and studs for general requirements (ISO 6157-1:1988)
• EN 26157-3:1991 Fasteners – Surface discontinuities – Part 3: Bolts, screws and studs for special requirements (ISO 6157-3:1988)
• EN 2617:2001 Aerospace series – Plates in titanium and titanium alloys – Thickness 6 mm < = a < = 100 mm - Dimensions
• EN 2622:2001 Aerospace series – Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm - Dimensions
• EN 2624:2007 Aerospace series – Pressure impulse testing of hydraulic system components
• EN 263:2008 Sanitary appliances – Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
• EN 2630:1993 Aerospace series – Aluminium alloy AL-P7009-T74511 – Extruded bars and sections a or D <= 125 mm with peripheral coarse grain control
• EN 2632:2005 Aerospace series – Aluminium alloy AL-P7075 – T73511 – Extruded bar and section – a or D<="" td="">
• EN 2633:1993 Aerospace series – Aluminium alloy AL-P2024-T3511 – Extruded bars and sections 1,2 mm <= a or D <= 150 mm with peripheral coarse grain control
• EN 2635:2005 Aerospace series – Aluminium alloy AL-P2014A – T6511 – Extruded bar and section – a or D<="" td="">
• EN 26352:1991 Ferronickel – Determination of nickel content – Dimenthylglyoxime gravimetric method (ISO 6352:1985)
• EN 2636:1993 Aerospace series – Aluminium alloy AL-P6082-T6 – Extruded bars and sections a or D <= 200 mm with peripheral coarse grain control
• EN 2641:1988 Aerospace series – Control cable assemblies – Combinations and dimensions
• EN 2644:1998 Aerospace series – Rod assemblies for flight controls – Technical specification
• EN 2645:2005 Aerospace series – Lockrings for adaptors, threaded, with lockring – Dimensions
• EN 26461-1:1993 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) – Part 1: Method by enrichment in a liquid medium (ISO 6461-1:1986)
• EN 26461-2:1993 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) – Part 2: Method by membrane filtration (ISO 6461-2:1986)
• EN 2647:2006 Aerospace series – Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated – Classification: 900 MPa (at ambient temperature)/235 °C
• EN 2648:1995 Aerospace series – Washers, concave, in alloy steel, cadmium plated
• EN 2649:1995 Aerospace series – Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature) / 235 °C
• EN 2650:1996 Aerospace series – Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C
• EN 26501:1992 Ferronickel – Specification and delivery requirements (ISO 6501:1988)
• EN 2651:1996 Aerospace series – Screws, pan head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C
• EN 2652:1997 Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235°C
• EN 2653:1996 Aerospace series – Screws, 100° countersunk normal head, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C
• EN 2654:1996 Aerospace series – Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated – Classification: 380 MPa (at ambient temperature)/80 °C
• EN 26553:1991 Automatic steam traps – Marking (ISO 6553:1980)
• EN 26554:1991 Flanged automatic steam traps – Face-to-face dimensions (ISO 6554:1980)
• EN 2656:2001 Aerospace series – Pipe coupling – Coupling end, welded – Geometric configuration
• EN 26590-1:1992 Packaging – Sacks – Vocabulary and types – Part 1: Paper sacks (ISO 6590-1:1983)
• EN 26590-2:1992 Packaging – Sacks – Vocabulary and types – Part 2: Sacks made from thermoplastic flexible film (ISO 6590-2:1986)
• EN 26591-1:1992 Packaging – Sacks – Description and method of measurement – Part 1: Empty paper sacks (ISO 6591-1:1984)
• EN 26591-2:1992 Packaging – Sacks – Description and method of measurement – Part 2: Empty sacks made from thermoplastic flexible film (ISO 6591-2:1985)
• EN 26599-1:1992 Packaging – Sacks – Conditioning for testing – Part 1: Paper sacks (ISO 6599-1:1983)
• EN 266:1991 Wall coverings in roll form – Specification for textile wall coverings
• EN 2665-001:1999 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A – Part 001: Technical specification
• EN 2665-003:1999 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A – Part 003: Metric thread terminals – Product standard
• EN 2665-004:1999 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A – Part 004: UNC thread terminals – Product standard
• EN 2667-6:2001 Aerospace series – Non-metallic materials – Foaming structural adhesives – Test methods – Part 6: Determination of water absorption
• EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
• EN 26704:1991 Automatic steam traps – Classification (ISO 6704:1982)
• EN 26777:1993 Water quality – Determination of nitrite – Molecular absorption spectrometric method (ISO 6777:1984)
• EN 2680:2006 Aerospace series – Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series – Classification: 900 MPa (at ambient temperature) / 235 °C
• EN 26801:1993 Rubber or plastics hoses – Determination of volumetric expansion (ISO 6801:1983)
• EN 26801:1993/A1:2011 Rubber or plastics hoses – Determination of volumetric expansion – Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd 1:2011)
• EN 2681:2004 Aerospace series – Aluminium alloy AL-P7010- – T74 – Hand and die forgings – a
• EN 2684:2004 Aerospace series – Aluminium alloy AL-P7010- – T7651 – Plate – 6 mm < a
• EN 2687:2004 Aerospace series – Aluminium alloy AL-P7010- – T7451 – Plate – 6 mm < a
• EN 26891:1991 Timber structures – Joints made with mechanical fasteners – General principles for the determination of strength and deformation characteristics (ISO 6891:1983)
• EN 269:1994 Respiratory protective devices – Powered fresh air hose breathing apparatus incorporating a hood – Requirements, testing, marking
• EN 2693:2005 Aerospace series – Aluminium alloy AL-P5086-H111 – Sheet and strip – 0,3 mm<="" td="">
• EN 2694:2005 Aerospace series – Aluminium alloy AL-P6061-T6 or T62 – Sheet and strip – 0,4 mm<="" td="">
• EN 26948:1991 Automatic steam traps – Production and performance characteristic tests (ISO 6948:1981)
• EN 2695:2005 Aerospace series – Aluminium alloy AL-P6081-T6 – Sheet and strip – 0,3 mm<="" td="">
• EN 2696:2005 Aerospace series – Aluminium alloy AL-P7075-T6 or T62 – Sheet and strip – 0,4 mm<="" td="">
• EN 2702:2005 Aerospace series – Aluminium alloy AL-P6061 – T6 or T62 – Drawn or extruded bar and section – a or D<="" td="">
• EN 27023:1992 Packaging – Sacks – Method of sampling empty sacks for testing (ISO 7023:1983)
• EN 2703:2005 Aerospace series – Aluminium alloy AL-P2024-T4 or T42 – Clad sheet and strip – 0,3 mm<="" td="">
• EN 2713-002:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 002: Screened and jacketed – General
• EN 2713-003:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 003: Screened (spiral) and jacketed, ink jet printable – Product standard
• EN 2713-004:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 004: Screened (braided) and jacketed, ink jet printable – Product standard
• EN 2713-005:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 005: Screened (spiral) and jacketed, CO2 laser printable – Product standard
• EN 2713-006:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 006: Screened (braided) and jacketed, CO2 laser printable – Product standard
• EN 2713-007:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 007: Screened (spiral) and jacketed, UV laser printable – Product standard
• EN 2713-008:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 008: Screened (braided) and jacketed, UV laser printable – Product standard
• EN 2713-009:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 009: Screened (spiral) and jacketed, YAG X3 laser printable – Product standard
• EN 2713-010:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 010: Screened (braided) and jacketed, YAG X3 laser printable – Product standard
• EN 2713-011:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 200 °C – Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable – Product standard
• EN 2714-002:2012 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 002: Screened and jacketed – General
• EN 2714-003:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 003: Screened (spiral) and jacketed, ink jet printable – Product standard
• EN 2714-004:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 004: Screened (braided) and jacketed, ink jet printable – Product standard
• EN 2714-005:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 005: Screened (spiral) and jacketed, CO2 laser printable – Product standard
• EN 2714-006:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 006: Screened (braided) and jacketed, CO2 laser printable – Product standard
• EN 2714-007:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 007: Screened (spiral) and jacketed, UV laser printable – Product standard
• EN 2714-008:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 008: Screened (braided) and jacketed, UV laser printable – Product standard
• EN 2714-009:2007 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 009: Screened (spiral) and jacketed, YAG X3 laser printable – Product standard
• EN 2714-010:2006 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 010: Screened (braided) and jacketed, YAG X3 laser printable – Product standard
• EN 2714-011:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 011: DM family, screened (spiral) and jacketed, UV laser printable – Product standard
• EN 2714-012:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 012: DM family, screened (braided) and jacketed, UV laser printable – Product standard
• EN 2714-013:2005 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 013: DR family, screened (spiral) and jacketed, UV laser printable – Product standard
• EN 2714-014:2009 Aerospace series – Cables, electrical, single and multicore for general purpose – Operating temperatures between – 55 °C and 260 °C – Part 014: DR family, 5 to 10 cores, taped, screened (braided) and jacketed, UV laser printable – Product standard
• EN 27201-1:1994 Fire protection – Fire extinguishing media – Halogenated hydrocarbons – Part 1: Specifications for halon 1211 and halon 1301 (ISO 7201-1:1989)
• EN 27201-2:1994 Fire protection – Fire extinguishing media – Halogenated hydrocarbons – Part 2: Code of practice for safe handling and transfer procedures (ISO 7201-2:1991)
• EN 27213:1993 Pulps – Sampling for testing (ISO 7213:1981)
• EN 27243:1993 Hot environments – Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989)
• EN 27286:1991 Graphical symbols for resistance welding equipment (ISO 7286:1986)
• EN 2731:2005 Aerospace series – Magnesium alloy MG-C46001 – T6 – Sand casting
• EN 2732:2005 Aerospace series – Magnesium alloy MG-C46001-T6 – Chill casting
• EN 274-1:2002 Waste fittings for sanitary appliances – Part 1: Requirements
• EN 274-2:2002 Waste fittings for sanitary appliances – Part 2: Test methods
• EN 2743:2001 Aerospace series – Fibre reinforced plastics – Standard procedures for conditioning prior to testing unaged materials
• EN 274-3:2002 Waste fittings for sanitary appliances – Part 3: Quality control
• EN 27434:1992 Slotted set screws with cone point (ISO 7434:1983)
• EN 27435:1992 Slotted set screws with long dog point (ISO 7435:1983)
• EN 27436:1992 Slotted set screws with cup point (ISO 7436:1983)
• EN 2744:1992 Aerospace series – Non metallic materials – Preferred test temperatures
• EN 2746:1998 Aerospace series – Glass fibre reinforced plastics – Flexural test – Three point bend method
• EN 2747:1998 Aerospace series – Glass fibre reinforced plastics – Tensile test
• EN 275:1992 Wood preservatives – Determination of the protective effectiveness against marine borers
• EN 2752:1989 Aerospace series – Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore – Classification : 1100 MPa/235 degree C
• EN 27520:1991 Ferronickel – Determination of cobalt content – Flame atomic absorption spectrometric method (ISO 7520:1985)
• EN 27526:1991 Nickel, ferronickel and nickel alloys – Determination of sulphur content – Infra-red absorption method after induction furnace combustion (ISO 7526:1985)
• EN 27527:1991 Nickel, ferronickel and nickel alloys – Determination of sulphur content – Iodometric titration method after induction furnace combustion (ISO 7527:1985)
• EN 2753:1996 Aerospace series – Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/235 °C
• EN 2754:2006 Aerospace series – Nuts, anchor, self locking, two lug, floating with counterbore – Classification: 1 100 MPa/235 °C
• EN 2755:2009 Aerospace series – Bearings, spherical plain in corrosion resisting steel with self-lubricating liner – Elevated load at ambient temperature – Technical specification
• EN 2756:2010 Aerospace series – Lamps, incandescent – Test methods
• EN 2757:2011 Aerospace series – Structural adhesives system – Test method – Determination of the drying and ignition residues of primers
• EN 27574-1:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment – Part 1: General considerations and definitions (ISO 7574-1:1985)
• EN 27574-2:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment – Part 2: Methods for stated values for individual machines (ISO 7574-2:1985)
• EN 27574-3:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment – Part 3: Simple (transition) method for stated values for batches of machines (ISO 7574-3:1985)
• EN 27574-4:1988 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment – Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985)
• EN 27627-1:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 1: General requirements (ISO 7627-1:1983)
• EN 27627-2:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983)
• EN 27627-3:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983)
• EN 27627-4:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983)
• EN 27627-5:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983)
• EN 27627-6:1993 Hardmetals – Chemical analysis by flame atomic absorption spectrometry – Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985)
• EN 277:1995 Sacks for the transport of food aid – Sacks made of woven polypropylene fabric
• EN 27721:1991 Countersunk head screws – Head configuration and gauging (ISO 7721:1983)
• EN 27740:1992 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)
• EN 27740:1992/A1:1997 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)
• EN 27740:1992/AC:1996 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985)
• EN 27787-1:1990 Dentistry – Dental rotary instruments – Cutters – Part 1: Steel laboratory cutters (ISO 7787-1:1984)
• EN 27787-1:1990/AC1:1990 Dentistry – Dental rotary instruments – Cutters – Part 1: Steel laboratory cutters
• EN 27787-3:1993 Dental rotary instruments – Cutters – Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991)
• EN 2781:1998 Aerospace series – Non-metallic materials – Structural adhesives – Test methods – Determination of the primer thickness
• EN 27841:1991 Automatic steam traps – Determination of steam loss – Test methods (ISO 7841:1988)
• EN 27842:1991 Automatic steam traps – Determination of discharge capacity – Test methods (ISO 7842:1988)
• EN 2786:2008 Aerospace series – Electrolytic silver plating of fasteners
• EN 27888:1993 Water quality – Determination of electrical conductivity (ISO 7888:1985)
• EN 2790:1991 Aerospace series – Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread diameter – Dimensions and loads
• EN 2791:1991 Aerospace series – Rod ends, adjustable, single fork and threaded shank with engagement: 1,5 x thread diameter – Dimensions and loads
• EN 2792:1991 Aerospace series – Rod ends, adjustable, double fork and threaded shank with engagement: 1,5 x thread diameter – Dimensions and loads
• EN 27931:1992 Insulation caps and bushes for resistance welding equipment (ISO 7931:1985)
• EN 2794-001:1999 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A – Part 001: Technical specification
• EN 2794-003:1999 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A – Part 003: Metric thread terminals – Product standard
• EN 2794-004:1999 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A – Part 004: UNC thread terminals – Product standard
• EN 27941:1993 Commercial propane and butane – Analysis by gas chromatography (ISO 7941:1988)
• EN 27965-1:1992 Packaging – Sacks – Drop test – Part 1: Paper sacks (ISO 7965-1:1984)
• EN 280:2013 Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests
• EN 2802:2005 Aerospace series – Aluminium alloy AL-P7475-T761 – Sheet and strip – 0,6 mm<="" td="">
• EN 2803:2005 Aerospace series – Aluminium alloy AL-P7475-T761 – Clad sheet and strip – 1,0 mm<="" td="">
• EN 28049:1992 Ferronickel shot – Sampling for analysis (ISO 8049:1988)
• EN 28050:1992 Ferronickel ingots or pieces – Sampling for analysis (ISO 8050:1988)
• EN 2808:1997 Aerospace series – Anodizing of titanium and titanium alloys
• EN 2809:2001 Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 2810:2001 Aerospace series – Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 2812:2009 Aerospace series – Stripping of electric cables
• EN 2815:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Bar for machining – a or D = 200 mm – Rm = 965 MPa
• EN 28167:1992 Projections for resistance welding (8167:1989)
• EN 2817:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Bar for machining – a or D = 200 mm – Rm = 1 070 MPa
• EN 2818:2009 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Forgings – a or D = 200 mm – Rm = 1 070 MPa
• EN 28206:1992 Acceptance tests for oxygen cutting machines – Reproducible accuracy – Operational characteristics (ISO 8206:1991)
• EN 2821:2007 Aerospace series – Steel FE-PM1802 (X5CrNiCu15-5) – Consumable electrode remelted – Solution treated and precipitation treated – Bar for machining – a or D = 200 mm – Rm = 1 310 MPa
• EN 28233:1990 Thermoplastics valves – Torque – Test method (ISO 8233:1988)
• EN 2824:2011 Aerospace series – Burning behaviour of non-metallic materials under the influence of radiating heat and flames – Determination of smoke density and gas components in the smoke of materials – Test equipment apparatus and media
• EN 2825:2011 Aerospace series – Burning behaviour of non metallic materials under the influence of radiating heat and flames – Determination of smoke density
• EN 2826:2011 Aerospace series – Burning behaviour of non metallic materials under the influence of radiating heat and flames – Determination of gas components in the smoke
• EN 2828:1993 Aerospace series – Adhesion test for metallic coatings by burnishing
• EN 2829:1994 Aerospace series – Adhesion test for metallic coatings by shot peening
• EN 283:1991 Swap bodies – Testing
• EN 2830:1993 Aerospace series – Adhesion test for metallic coatings by shearing action
• EN 2831:1993 Aerospace series – Hydrogen embrittlement of steels – Test by slow bending
• EN 2832:1993 Aerospace series – Hydrogen embrittlement of steels – Notched specimen test
• EN 2833-005:2013 Aerospace series – Glass fibre thermosetting preimpregnates – Technical specification – Part 005: Glass fabric/phenolic resin preimpregnate
• EN 28343:1991 Ferronickel – Determination of silicon content – Gravimetric method (ISO 8343:1985)
• EN 2835:2012 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 40 IRHD
• EN 2836:2012 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 50 IRHD
• EN 2837:2012 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 60 IRHD
• EN 2838:2013 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 70 IRHD
• EN 2839:2013 Aerospace series – Chloroprene rubber (CR) – Heat resistance – Hardness 80 IRHD
• EN 284:2006 Swap bodies – Non-stackable swap bodies of class C – Dimensions and general requirements
• EN 2840:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 50 IRHD
• EN 2841:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 60 IRHD
• EN 2842:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 70 IRHD
• EN 2843:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 80 IRHD
• EN 28430-1:1992 Resistance spot welding – Electrode holders – Part 1: Taper fixing 1:10 (ISO 8430-1:1988)
• EN 28430-2:1992 Resistance spot welding – Electrode holders – Part 2: Morse taper fixing (ISO 8430-2:1988)
• EN 28430-3:1992 Resistance spot welding – Electrode holders – Part 3: Parallel shank fixing for end thrust (ISO 8430-3:1988)
• EN 2844:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Mineral oil resistant – Hardness 90 IRHD
• EN 2845:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 50 IRHD
• EN 2846:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 60 IRHD
• EN 2847:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 70 IRHD
• EN 28474:1992 Packaging – Complete, filled transport packages – Water immersion test (ISO 8474:1986)
• EN 2848:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 80 IRHD
• EN 2849:2013 Aerospace series – Acrylonitrile-butadiene rubber (NBR) – Fuel and synthetic oil resistant – Hardness 90 IRHD
• EN 285:2006+A2:2009 Sterilization – Steam sterilizers – Large sterilizers
• EN 2851:1992 Aerospace series – Marking of parts and assemblies other than engines – Indications on drawings
• EN 28510-1:1993 Adhesives – Peel test for a flexible-bonded-to-rigid test specimen assembly – Part 1: 90° peel (ISO 8510-1:1990)
• EN 2852:2010 Aerospace series – Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated – Classification: 1 100 MPa/650 °C
• EN 2853:2005 Aerospace series – Current ratings for electrical cables with conductor EN 2083
• EN 2854-002:2009 Aerospace series – Cables, electrical for general purpose – Cross sections equal to and greater than 9 mm² – Operating temperatures between – 55 °C and 260 °C – Part 002: General
• EN 2854-003:2009 Aerospace series – Cables, electrical for general purpose – Cross sections equal to and greater than 9 mm² – Operating temperatures between – 55 °C and 260 °C – Part 003: Product standard
• EN 2856:2006 Aerospace series – Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore – Classification: 1 100 MPa/235 °C
• EN 2858-1:1994 Aerospace series – Titanium and titanium alloys – Forging stock and forgings – Technical specification – Part 1: General requirements
• EN 2858-2:1994 Aerospace series – Titanium and titanium alloys – Forging stock and forgings – Technical specification – Part 2: Forging stock
• EN 2858-3:1994 Aerospace series – Titanium and titanium alloys – Forging stock and forgings – Technical specification – Part 3: Pre-production and production forgings
• EN 2859:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1 100 MPa (at ambient temperature) / 235 °C
• EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
• EN 286-1:1998/A1:2002 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
• EN 286-1:1998/A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
• EN 286-1:1998/AC:2002 Simple unfired pressure vessels designed to contain air or nitrogen – Part 1: Pressure vessels for general purposes
• EN 286-2:1992 Simple unfired pressure vessels designed to contain air or nitrogen – Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
• EN 286-2:1992/AC:1992 Simple unfired pressure vessels designed to contain air or nitrogen – Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers
• EN 2862:2009 Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated – Classification : 1 100 MPa (at ambient temperature) / 235 °C
• EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen – Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
• EN 2863:2010 Aerospace series – Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C
• EN 286-4:1994 Simple unfired pressure vessels designed to contain air or nitrogen – Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
• EN 2865:2009 Aerospace series – Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C
• EN 28653:1992 Jewellery – Ring-sizes – Definition, measurement and designation (ISO 8653:1986)
• EN 28654:1992 Colours of gold alloys – Definition, range of colours and designation (ISO 8654:1987)
• EN 28659:1990 Thermoplastics valves – Fatigue strength – Test method (ISO 8659:1989)
• EN 2866:2009 Aerospace series – Nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS2 lubricated – Classification: 1 110 MPa (at ambient temperature) / 235 °C
• EN 28662-1:1992 Hand-held portable power tools – Measurement of vibrations at the handle – Part 1: General (ISO 8662-1:1988)
• EN 2867:2009 Aerospace series – Nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C
• EN 2869:2009 Aerospace series – Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated – Classification: 1 100 MPa (at ambient temperature) / 650 °C
• EN 2870:1996 Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C
• EN 2870:1996/AC:1996 Aerospace series – Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C
• EN 28701:2012 Intelligent transport systems – Public transport – Identification of Fixed Objects in Public Transport (IFOPT)
• EN 28736:1992 Taper pins with internal thread, unhardened (ISO 8736:1986)
• EN 28737:1992 Taper pins with external thread, unhardened (ISO 8737:1986)
• EN 28738:1992 Plain washers for clevis pins – Product grade A (ISO 8738:1986)
• EN 2874:1996 Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting base alloy, passivated – Classification: 1 550 MPa (at ambient temperature)/315 °C
• EN 2874:1996/AC:1996 Aerospace series – Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting base alloy, passivated – Classification: 1 550 MPa (at ambient temperature)/315 °C
• EN 28749:1992 Pins and grooved pins – Shear test (ISO 8749:1986)
• EN 287-6:2010 Qualification test of welders – Fusion welding – Part 6: Cast iron
• EN 28768:1992 Packaging – Complete, filled transport packages – Toppling test (ISO 8768:1986)
• EN 2881:2006 Aerospace series – Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated, metric series – Classification: 900 MPa (at ambient temperature) / 120 °C
• EN 2882:2006 Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 235 °C
• EN 2883:2009 Aerospace series – Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature) / 315 °C
• EN 28839:1991 Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
• EN 2884:1996 Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated – Classification: 1 100 MPa (at ambient temperature)/315 °C
• EN 28846:1993 Small craft – Electrical devices – Protection against ignition of surrounding flammable gases (ISO 8846:1990)
• EN 28846:1993/A1:2000 Small craft – Electrical devices – Protection against ignition of surrounding flammable gases (ISO 8846:1990)
• EN 28848:1993 Small craft – Remote steering systems (ISO 8848:1990)
• EN 28848:1993/A1:2000 Small craft – Remote steering systems (ISO 8848:1990)
• EN 2885:1996 Aerospace series – Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C
• EN 2886:1996 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C
• EN 2887:1995 Aerospace series – Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature) / 425 °C
• EN 2888:2006 Aerospace series – Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated – Classification: 600 MPa (at ambient temperature)/425 °C
• EN 2889:2006 Aerospace series – Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 900 MPa (at ambient temperature)/235 °C
• EN 289:2004+A1:2008 Plastics and rubber machines – Presses – Safety requirements
• EN 28960:1993 Refrigerators, frozen-food storage cabinets and food freezers for household and similar use – Measurement of emission of airborne acoustical noise (ISO 8960:1991)
• EN 2897:1996 Aerospace series – Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated – Classification: 1 100 MPa (at ambient temperature)/235 °C
• EN 2898:2008 Aerospace series – Corrosion and heat resisting steel rivets – Technical specification
• EN 29008:1994 Glass bottles – Verticality – Test method (ISO 9008:1991)
• EN 29009:1994 Glass containers – Height and non-parallelism of finish with reference to container base – Test methods (ISO 9009:1991)
• EN 29052-1:1992 Acoustics – Determination of dynamic stiffness – Part 1: Materials used under floating floors in dwellings
• EN 29053:1993 Acoustics – Materials for acoustical applications – Determination of airflow resistance (ISO 9053:1991)
• EN 2906:1994 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
• EN 2907:1995 Aerospace series – Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated – Classification: 1100 MPa (at ambient temperature) / 650 °C
• EN 29073-1:1992 Textiles – Test methods for nonwovens – Part 1: Determination of mass per unit area
• EN 29073-3:1992 Textiles – Test methods for nonwovens – Part 3: Determination of tensile strength and elongation
• EN 2908:1994 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
• EN 2909:1995 Aerospace series – Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa (at ambient temperature) / 650 °C
• EN 29090:1992 Gas tightness of equipment for gas welding and allied processes (ISO 9090:1989)
• EN 2910:1994 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE – PA92HT (A286) – Classification: 1 100 MPa (at ambient temperature) / 650 °C
• EN 29104:1993 Measurement of fluid flow in closed conduits – Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
• EN 2911:1995 Aerospace series – Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 1 100 MPa (at ambient temperature) / 650 °C
• EN 2912:1996 Aerospace series – Washers, flat, large diameter, in aluminium alloy, anodized or chromated
• EN 2913:1999 Aerospace series – Washers, flat, large diameter, in steel, cadmium plated
• EN 2914:1996 Aerospace series – Washers, flat, large diameter, in heat resisting steel, passivated
• EN 29202:1992 Jewellery – Fineness of precious metal alloys (ISO 9202:1991)
• EN 29241-2:1993 Ergonomic requirements for office work with visual display terminals (VDTs) – Part 2: Guidance on task requirements (ISO 9241-2:1992)
• EN 2925:1994 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 2926:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C
• EN 2927:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1 275 MPa (at ambient temperature)/650 °C
• EN 2928:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1 275 MPa (at ambient temperature)/650 °C
• EN 2929:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1 210 MPa (at ambient temperature)/730 °C
• EN 29295:1991 Acoustics – Measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1988)
• EN 293:1992 Oil pressure atomizing nozzles – Minimum requirements – Testing
• EN 2930:1996 Aerospace series – Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1 210 MPa (at ambient temperature)/730°C
• EN 2931:1994 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 29313:1992 Resistance spot welding equipment – Cooling tubes (ISO 9313:1989)
• EN 2932:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650°C
• EN 2933:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) – Classification: 1 275 MPa (at ambient temperature)/650°C
• EN 2934:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated – Classification: 1 275 MPa (at ambient temperature)/650°C
• EN 2935:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) – Classification: 1 210 MPa (at ambient temperature)/730°C
• EN 2936:1996 Aerospace series – Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated – Classification: 1 210 MPa (at ambient temperature)/730°C
• EN 29367-1:1993 Lashing and securing arrangements on road vehicles for sea transportation on Ro/ro ships – General requirements – Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989)
• EN 29367-1:1993/AC:1994 Lashing and securing arrangements on road vehicles for sea transportation on Ro/ro ships – General requirements – Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989)
• EN 29367-2:1994 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships – General requirements – Part 2: Semi-trailers (ISO 9367-2:1994)
• EN 2937:1994 Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 2938:1995 Aerospace series – Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 2939:1994 Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) – Classification: 900 MPa (at ambient temperature) / 650 °C
• EN 2940:1995 Aerospace series – Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated – Classification: 900 MPa (at ambient temperature)/650 °C
• EN 2941:2008 Aerospace series – Nickel alloy rivets – Technical specification
• EN 2942:1998 Aerospace series – Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
• EN 2943:1998 Aerospace series – Inserts, screw thread, helical coil, self-locking – Technical specification
• EN 2944:1998 Aerospace series – Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
• EN 2945:1998 Aerospace series – Inserts, screw thread, helical coil, self-locking – Assembly procedure
• EN 29454-1:1993 Soft soldering fluxes – Classification and requirements – Part 1: Classification, labelling and packaging (ISO 9454-1:1990)
• EN 29455-1:1993 Soft soldering fluxes – Test methods – Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:1990)
• EN 29455-11:1993 Soft soldering fluxes – Test methods – Part 11: Solubility of flux residues (ISO 9455-11:1991)
• EN 29455-14:1993 Soft soldering fluxes – Test methods – Part 14: Assessment of tackiness of flux residues (ISO 9455-14:1991)
• EN 29455-5:1993 Soft soldering fluxes – Test methods – Part 5: Copper mirror test (ISO 9455-5:1992)
• EN 29455-8:1993 Soft soldering fluxes – Test methods – Part 8: Determination of zinc content (ISO 9455-8:1991)
• EN 2947:2006 Aerospace series – Steel FE-PA3004 (X10CrNi18-09) – Air melted – Non heat treated – Cold drawn wire – a or D = 2,3 mm
• EN 2948:1996 Aerospace series – Washers, tab, in heat resisting steel, passivated
• EN 2949:1996 Aerospace series – Washers, wire locking, in corrosion resisting steel, passivated
• EN 2950:2008 Aerospace series – Test method – Wrought heat resisting alloys Semi-finished products and parts – Conditions for macrographic and micrographic examination – Atlas of structures and defects
• EN 295-1:2013 Vitrified clay pipe systems for drains and sewers – Part 1: Requirements for pipes, fittings and joints
• EN 29519:1993 Shipbuilding and marine structures – Rungs for dog-step ladders (ISO 9519:1990)
• EN 295-2:2013 Vitrified clay pipe systems for drains and sewers – Part 2: Evaluation of conformity and sampling
• EN 295-3:2012 Vitrified clay pipe systems for drains and sewers – Part 3: Test methods
• EN 295-4:2013 Vitrified clay pipe systems for drains and sewers – Part 4: Requirements for adaptors, connectors and flexible couplings
• EN 2954-001:2010 Aerospace series – Macrostructure of titanium and titanium alloy wrought products – Part 001: General requirements
• EN 2954-002:2010 Aerospace series – Macrostructure of titanium and titanium alloy wrought products – Part 002: Macrostructure of bar, section, forging stock and forgings
• EN 2955:1993 Aerospace series – Recycling of titanium and titanium alloy scrap
• EN 2955:1993/AC:1995 Aerospace series – Recycling of titanium and titanium alloy scrap
• EN 295-5:2013 Vitrified clay pipe systems for drains and sewers – Part 5: Requirements for perforated pipes and fittings
• EN 295-6:2013 Vitrified clay pipes systems for drain and sewers – Part 6: Requirements for components of manholes and inspection chambers
• EN 295-7:2013 Vitrified clay pipe systems for drains and sewers – Part 7: Requirements for pipes and joints for pipe jacking
• EN 29658:1991 Steel – Determination of aluminium content – Flame atomic absorption spectrometric method (ISO 9658:1990)
• EN 297:1994 Gas-fired central heating boilers – Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 297:1994/A2:1996 Gas-fired central heating boilers – Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 297:1994/A2:1996/AC:2006 Gas-fired central heating boilers – Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 297:1994/A3:1996 Gas-fired central heating boilers – Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 297:1994/A4:2004 Gas-fired central heating boilers – Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 297:1994/A5:1998 Gas-fired central heating boilers – Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 297:1994/A6:2003 Gas-fired central heating boilers – Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
• EN 29775:1993 Small craft – Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
• EN 29775:1993/A1:2000 Small craft – Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)
• EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
• EN 2985:1996 Aerospace series – Nickel-cadmium batteries of format A type
• EN 2986:1996 Aerospace series – Nickel-cadmium batteries of format B type
• EN 29865:1993 Textiles – Determination of water repellency of fabrics by the Bundesmann rain-shower test (ISO 9865:1991)
• EN 2987:1996 Aerospace series – Nickel-cadmium batteries of format C type
• EN 2988:1996 Aerospace series – Nickel-cadmium batteries of format D type
• EN 29885:1994 Wide-mouth glass containers – Deviation from flatness of top sealing surface – Test methods (ISO 9885:1991)
• EN 299:2009 Oil pressure atomizing nozzles – Determination of the angle and spray characteristics
• EN 2991:1996 Aerospace series – Nickel-cadmium batteries of format E type
• EN 2993:1996 Aerospace series – Nickel-cadmium batteries of format F type
• EN 2995-001:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 001: Technical specification
• EN 2995-004:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 004: With signal contact – Product standard
• EN 2995-005:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 005: With polarized signal contact – Product standard
• EN 2996-001:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 001: Technical specification
• EN 2996-004:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 004: With signal contact – Product standard
• EN 2996-005:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 005: With polarized signal contact – Product standard
• EN 2997-001:2011 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 001: Technical specification
• EN 2997-002:2012 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 002: Specification of performance and contact arrangements
• EN 2997-003:2012 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 003: Square flange receptacle – Product standard
• EN 2997-004:2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 004: Jam-nut mounted receptacle – Product standard
• EN 2997-005:2012 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 005: Hermetic square flange receptacle – Product standard
• EN 2997-006:2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 006: Hermetic jam-nut mounted receptacle – Product standard
• EN 2997-007:2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 007: Hermetic receptacle with round flange attached by welding or brazing – Product standard
• EN 2997-008:2006 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 008: Plug – Product standard
• EN 2997-009:2010 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 009: Protective cover for receptacle – Product standard
• EN 2997-010:2010 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 010: Protective cover for plug – Product standard
• EN 2997-011:2010 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 011: Dummy receptacle – Product standard
• EN 2997-012:2009 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 012: Jam-nut for jam-nut receptacles – Product standard
• EN 2997-013:2009 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 013: O-ring seal for jam-nut receptacles – Product standard
• EN 2997-014:2011 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 014: Square flange receptacle with integrated accessory – Product standard
• EN 2997-015:2011 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak – Part 015: Jam-nut mounted receptacle with integrated accessory – Product standard
• EN 2997-016:2010 Aerospace series – Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175°C continuous, 200°C continuous, 260°C peak – Part 016: Plug with integrated accessory – Product standard
• EN 2998:1996 Aerospace series – Washers, flat, in heat resisting steel, passivated

| 1 |


top