Commercial & Military Standard for Army Construction

평택 미군기지 건설관련 규격목록

 

1         ACOUSTICAL SOCIETY OF AMERICA (ASA)

2         ASA S1.11 (2004; Errata 2005; R 2009) Specification for Octave- Band and Fractional-Octave-Band Analog and Digital Filters (ASA 65)

3         ASA S1.13 (2005; R 2010) Methods for the Measurement of Sound Pressure Levels in Air (ASA 118)

4         ASA S1.4 (1983; Amendment 1985; R 2006) Specification for Sound Level Meters (ASA 47)

5         ASA S12.11/Part 1 (2013) Acoustics-Measurement of Noise and Vibration of Small Air-Moving Devices, Part 1: Airborne Noise Emission

6         ASA S12.11/Part 2 (2013) Acoustics-Measurement of Noise and Vibration of Small Air-Moving Devices, Part 2: Structure-borne Vibration

7         ASA S12.23 (1989; R 2011) Method for the Designation of Sound Power Emitted by Machinery and Equipment

8         ASA S12.30 (1990; R 2002) Standard Guidelines for the Use of Sound Power Standards and for the Preparation of Noise Test Codes

9         ASA S12.51 (2012) Acoustics Determination of Sound Power Levels of Noise Sources using Sound Pressure Precision Method for Reverberation Rooms

10        ASA S12.53/1 (2011) Acoustics- Determination of Sound Power Levels of Noise Sources – Engineering Methods for Small, Movable Sources in Reverberant Fields – Part1: Comparison Method for Hard-Walled Test Rooms

11        ASA S12.53/2 (1999; R 2009) Acoustics- Determination of Sound Power Levels of Noise Sources Using Sound Pressure Reverberant Fields – Part2: Methods for Special Reverberation Test Rooms

12        ASA S12.54 (2011) Acoustics – Determination of Sound Power Levels of Noise Sources Using Sound Pressure – Engineering Method in an Essentially Free Field over a Reflecting Plane

13        ASA S2.19 (1999; R 2004) Mechanical Vibration – Balance Quality Requirements of Rigid Rotors, Part 1: Determination of Permissible Residual Unbalance, Including Marine Applications

14        ASA S2.40 (1984; R 2001) Mechanical Vibration of Rotating and Reciprocating Machinery – Requirements for Instruments for Measuring Vibration Severity

15        ASA S2.71 (1983; R 2006) Guide to the Evaluation of Human Exposure to Vibration in Buildings

16        ASA S3.1 (1999; R 2013) Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms (ASA 99)

17        ASA S3.2 (2009) Method for Measuring the Intelligibility of Speech Over Communication Systems (ASA 85)

18        ASA S3.41 (1990; R 2008) Audible Emergency Evacuation Signal (ASA 96) AIR CONDITIONING CONTRACTORS OF AMERICA (ACCA)

19        AIR CONDITIONING CONTRACTORS OF AMERICA (ACCA)

20        ACCA Manual 4 (2001) Installation Techniques for Perimeter Heating and Cooling; 11th Edition AIR DIFFUSION COUNCIL (ADC) ADC Standards Manual (2008; 5th Edition) Flexible Duct Performance Installation Standards

21        AIR DIFFUSION COUNCIL (ADC)

22        AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)

23        AMCA 201 (2002; R 2011) Fans and Systems

24        AMCA 203 (1990; R 2011) Field Performance Measurements of Fan Systems

25        AMCA 204 (2005; R 2012) Balance Quality and Vibration Levels for Fans

26        AMCA 210 (2007) Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

27        AMCA 211 (2005; Rev 6 2012) Certified Ratings Programme – Product Rating Manual for Air Fan Performance

28        AMCA 220 (2005) Test Methods for Air Curtain Units

29        AMCA 300 (2008) Reverberant Room Method for Sound Testing of Fans

30        AMCA 301 (1990; INT 2007) Methods for Calculating Fan Sound Ratings from Laboratory Test Data

31        AMCA 500-D (2012) Laboratory Methods of Testing Dampers for Rating

32        AMCA 500-L (2012) Laboratory Methods of Testing Louvers for Rating

33        AMCA 511 (2013) Certified Ratings Program for Air Control Devices

34        AMCA 801 (2001; R 2008) Industrial Process/Power Generation Fans: Specification Guidelines

35        AMCA 802 (2002; R 2008) Industrial Process/Power Generation Fans: Establishing Performance Using Laboratory Models

36        AMCA 99 (2010) Standards Handbook

37        AMCA 99-0401 (1986) Classifications for Spark Resistant Construction

38        AMCA Licensed Products (Online) Directory of Products Licensed Under the

39        AMCA International Certified Ratings Program

40        AIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE (AHRI)

41        AHRI 1010 (2002) Self-Contained, Mechanically Refrigerated Drinking-Water Coolers

42        AHRI 1060 I-P (2011) Performance Rating of Air-to-Air Heat Exchangers for Energy Recovery Ventilation Heat Equipment

43        AHRI 260 I-P (2012) Sound Rating of Ducted Air Moving and Conditioning Equipment

44        AHRI 320 (1998) Water-Source Heat Pumps

45        AHRI 325 (1998) Ground Water-Source Heat Pumps

46        AHRI 350 (2008) Sound Rating of Non-Ducted Indoor Air-Conditioning Equipment

47        AHRI 365 (2009) Commercial and Industrial Unitary Air-Conditioning Condensing Units

48        AHRI 366 (2009) Commercial and Industrial Unitary Air-Conditioning Condensing Units

49        AHRI 410 (2001; Addendum 1 2002; Addendum 2 2005; Addendum 3 2011) Forced-Circulation Air-Cooling and Air-Heating Coils

50        AHRI 420 (2008) Performance Rating of Forced-Circulation Free-Delivery Unit Coolers for Refrigeration

51        AHRI 430 (2009) Central-Station Air-Handling Units

52        AHRI 440 (2008) Room Fan-Coils and Unit Ventilators

53        AHRI 450 (2007) Water-Cooled Refrigerant Condensers, Remote Type

54        AHRI 480 (2007) Refrigerant-Cooled Liquid Coolers, Remote Type

55        AHRI 490 I-P (2011) Performance Rating of Remote Mechanical-Draft Evaporatively-Cooled Refrigerant Condensers

56        AHRI 540 (2004) Performance Rating Of Positive Displacement Refrigerant Compressors And Compressor Units

57        AHRI 550/590 (2003) Performance Rating of Water-Chilling Packages Using the Vapor Compression Cycle

58        AHRI 550/590 I-P (2011) Performance Rating Of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle

59        AHRI 575 (2008) Method of Measuring Machinery Sound Within an Equipment Space

60        AHRI 700 (2012; Add 1 2013) Specifications for Fluorocarbon Refrigerants

61        AHRI 710 I-P (2009) Performance Rating of Liquid-Line Driers

62        AHRI 711 (2009) Performance Rating of Liquid-Line Driers

63        AHRI 720 (2002) Refrigerant Access Valves and Hose Connectors

64        AHRI 740 (1998) Refrigerant Recovery/Recycling Equipment

65        AHRI 880 I-P (2011) Performance Rating of Air Terminals

66        AHRI 885 (2008; Addendum 2011) Procedure for Estimating Occupied Space Sound Levels in the Application of Air Terminals and Air Outlets

67        AHRI DCAACP (Online) Directory of Certified Applied Air-Conditioning Products AHRI DCUP (Online) Directory of Certified Unitary Products

68        AHRI Guideline D (1996) Application and Installation of Central Station Air-Handling Units

69        AHRI Guideline K (2009) Guideline for Containers for Recovered Non-Flammable Fluorocarbon Refrigerants

70        ANSI/AHRI 210/240 (2008; Add 1 2011; Add 2 2012) Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment

71        ANSI/AHRI 270 (2008) Sound Rating of Outdoor Unitary Equipment

72        ANSI/AHRI 340/360 (2007) Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment

73        ANSI/AHRI 370 (2011) Sound Rating of Large Outdoor Refrigerating and Air-Conditioning Equipment

74        ANSI/AHRI 460 (2005) Performance Rating of Remote Mechanical-Draft Air-Cooled Refrigerant Condensers

75        ANSI/AHRI 495 (2005) Performance Rating of Refrigerant Liquid Receivers

76        ANSI/AHRI 510 (2006) Performance Rating of Positive Displacement Ammonia Compressors and Compressor Units

77        ANSI/AHRI 520 (2004) Performance Rating of Positive Displacement Condensing Units

78        ANSI/AHRI 560 (2000) Absorption Water Chilling and Water Heating Packages

79        ANSI/AHRI 620 (2004) Performance Rating of Self-Contained Humidifiers for Residential Applications

80        ANSI/AHRI 640 (2005) Performance Rating of Commercial and Industrial Humidifiers

81        ANSI/AHRI 750 (2007) Thermostatic Refrigerant Expansion Valves

82        ANSI/AHRI 760 (2007) Performance Rating of Solenoid Valves for Use With Volatile Refrigerants

83        ANSI/AHRI 850 (2004) Performance Rating of Commercial and Industrial Air Filter Equipment

84        ANSI/AHRI/CSA 310/380 (2004) Standard for Packaged Terminal Air-Conditioners and Heat Pumps

85        ALLIANCE FOR TELECOMMUNICATIONS INDUSTRY SOLUTIONS (ATIS)

86        ATIS ANSI O5.1 (2008) Wood Poles — Specifications & Dimensions

87        ALUMINUM ASSOCIATION (AA)

88        AA ADM (2010) Aluminum Design Manual

89        AA ASD1 (2013) Aluminum Standards and Data

90        AA ASM-35 (2000) Specifications for Aluminum Sheet Metal Work in Building Construction, Construction Manual Series Section 5

91        AA DAF45 (2003; Reaffirmed 2009) Designation System for Aluminum Finishes

92        AA H35.1/35.1M (2009) ANS Alloy & Temper Designation Systems for Aluminum

93        AA H35.2 (2009) ANS Dimensional Tolerances for Aluminum Mill Products

94        AA H35.2M (2009) ANS Dimensional Tolerances for Aluminum Mill Products

95        AA PK-1 (2009) Pink Sheets: Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Castings & Ingot AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)

96        AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)

97        AAMA 1002-11 (2011) Voluntary Specification for Secondary Storm Products for Windows and Sliding Glass Doors

98        AAMA 1302.5 (1976) Voluntary Specifications for Forced-Entry Resistant Aluminum Prime Windows

99        AAMA 1503 (2009) Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections

100      AAMA 2603 (2002) Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels

101      AAMA 2604 (2010) Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels

102      AAMA 2605 (2011) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels

103      AAMA 501 (2005) Methods of Test for Exterior Walls

104      AAMA 501.1 (2005) Standard Test Method for Water Penetration of Windows, Curtain Walls and Doors Using Dynamic Pressure

105      AAMA 501.4 & 501.6 (2009) Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drifts & Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System

106      AAMA 503 (2008) Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems

107      AAMA 609 & 610 (2009) Cleaning and Maintenance Guide for Architecturally Finished Aluminum

108      AAMA 611 (1998; R 2004) Voluntary Specification for Anodized Architectural Aluminum

109      AAMA 701/702 (2004) Voluntary Specification for Pile Weatherstripping and Replaceable Fenestration Weatherseals

110      AAMA 800 (2010) Voluntary Specifications and Test Methods for Sealants

111      AAMA 902 (1992; R 1999; R 2007) Voluntary Specification for Sash Balances

112      AAMA CW-10 (2004) Care and Handling of Architectural Aluminum from Shop to Site

113      AAMA MCWM-1 (1989) Metal Curtain Wall Manual

114      AAMA WSG.1 (1995) Window Selection Guide

115      AAMA/WDMA/CSA 101/I.S.2/A(4240011) Standard/Specification for Windows, Doors, and Skylights

116      AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS (AASHTO)

117      AASHTO GDHS-5 (2011, Errata 2012) A Policy on Geometric Design of Highways and Streets AASHTO HB-17 (2002; Errata 2003; Errata 2005, 17th Edition)

118      AASHTO HB-17 (2002; Errata 2003; Errata 2005, 17th Edition) Standard Specifications for Highway Bridges

119      AASHTO LTS (2013; Errata 2013) Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals

120      AASHTO M 118 (1979) Coal-Tar Bitumen Used in Roofing, Damp-Proofing, and Waterproofing

121      AASHTO M 133 (2012) Standard Specification for Preservatives and Pressure Treatment Processes for Timber

122      AASHTO M 140 (2013) Standard Specification for Emulsified Asphalt

123      AASHTO M 145 (1991; R 2008) Standard Specification for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

124      AASHTO M 147 (1965; R 2008) Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses

125      AASHTO M 156 (2013) Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures

126      AASHTO M 167M/M 167 (2009) Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

127      AASHTO M 180 (2012) Standard Specification for Corrugated Sheet Steel Beams for Highway Guardrail

128      AASHTO M 182 (2005; R 2009) Standard Specification for Burlap Cloth Made from Jute or Kenaf and Cotton Mats

129      AASHTO M 190 (2004; R 2012) Standard Specification for Bituminous Coated Corrugated Metal Culvert Pipe and Pipe Arches

130      AASHTO M 198 (2010) Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

131      AASHTO M 200 (1973; R 2012) Standard Specification for Epoxy Protective Coatings

132      AASHTO M 208 (2001; R 2009) Standard Specification for Cationic Emulsified Asphalt

133      AASHTO M 216 (2013) Standard Specification for Lime for Soil Stabilization

134      AASHTO M 219 (1992; R 2012) Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

135      AASHTO M 226 (1980; R 2008) Standard Specification for Viscosity-Graded Asphalt Cement

136      AASHTO M 243 (1996; R 2012) Standard Specification for Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches

137      AASHTO M 247 (2013) Standard Specification for Glass Beads Used in Pavement Markings

138      AASHTO M 252 (2009) Standard Specification for Corrugated Polyethylene Drainage Pipe

139      AASHTO M 288 (2006; R 2011) Standard Specification for Geotextile Specification for Highway Applications

140      AASHTO M 294 (2013) Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter

141      AASHTO M 300 (2003; R 2012) Standard Specification for Inorganic Zinc-Rich Primer

142      AASHTO M 314 (1990; R 2008) Standard Specification for Steel Anchor Bolts

143      AASHTO M 320 (2010) Standard Specification for Performance-Graded Asphalt Binder

144      AASHTO M 325 (2008) Standard Specification for Stone Matrix Asphalt (SMA)

145      AASHTO M 43 (2005; R 2009) Standard Specification for Sizes of Aggregate for Road and Bridge Construction

146      AASHTO M 81 (1992; R 2008) Standard Specification for Cutback Asphalt (Rapid-Curing Type)

147      AASHTO M 82 (1975; R 2008) Standard Specification for Cutback Asphalt (Medium-Curing Type)

148      AASHTO R 46 (2008) Standard Practice for Designing Stone Matrix Asphalt (SMA)

149      AASHTO RSDG-4 (2011; Errata 2012) Roadside Design Guide

150      AASHTO SDDP-1-OL (2003) Shop Detail Drawing Presentation Guidelines

151      AASHTO T 102 (2009) Standard Method of Test for Spot Test of Asphaltic Materials

152      AASHTO T 11 (2005; R 2009) Standard Method of Test for Materials Finer Than 75 Micrometer (No. 200) Sieve in Mineral Aggregates by Washing

153      AASHTO T 111 (2011) Standard Method of Test for Mineral Matter or Ash in Asphalt Materials

154      AASHTO T 134 (2005; R 2009) Standard Method of Test for Moisture-Density Relations of Soil-Cement Mixtures

155      AASHTO T 135 (2013) Standard Method of Test for Wetting-and-Drying Test of Compacted Soil-Cement Mixtures

156      AASHTO T 136 (1997; R 2009) Standard Method of Test for Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures

157      AASHTO T 180 (2010) Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop

158      AASHTO T 193 (2013) Standard Method of Test for The California Bearing Ratio

159      AASHTO T 219 (1987; R 2008) Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

160      AASHTO T 224 (2010) Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test

161      AASHTO T 230 (1968; R 2000) Determining Degree of Pavement Compaction of Bituminous Aggregate Mixtures

162      AASHTO T 259 (2002; R 2012) Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration

163      AASHTO T 260 (1997; R 2011) Standard Method of Test for Sampling and Testing for Chloride Ion in Concrete and

164      AASHTO T 27 (2011) Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates

165      AASHTO T 30 (2013) Standard Method of Test for Mechanical Analysis of Extracted Aggregate

166      AASHTO T 308 (2010) Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method

167      AASHTO T 312 (2012) Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

168      AASHTO T 326 (2005; R 2009) Standard Method of Test for Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading)

169      AASHTO T 329 (2013) Standard Test Method for Moisture Content of Hot Mix Asphalt (HMA) by Oven Method

170      AASHTO T 334 (2008) Standard Method of Test for Estimating the Cracking Tendency of Concrete

171      AASHTO T 40 (2002; R 2006) Sampling Bituminous Materials AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

172      AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

173      AATCC 107 (2013) Colorfastness to Water

174      AATCC 127 (2013) Water Resistance: Hydrostatic Pressure Test

175      AATCC 134 (2011; E 2013) Electrostatic Propensity of Carpets

176      AATCC 16 (2004; E 2010) Colorfastness to Light

177      AATCC 165 (2013) Colorfastness to Crocking: Textile Floor Coverings – Crockmeter Method

178      AATCC 174 (2011) Antimicrobial Activity Assessment of Carpets AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)

179      AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)

180      ABMA 11 (1990; R 2008) Load Ratings and Fatigue Life for Roller Bearings

181      ABMA 7 (1995; Stabilized (S) 2013) Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plan

182      ABMA 9 (1990; ERTA 2012; S 2013) Load Ratings and Fatigue Life for Ball Bearings AMERICAN BOILER MANUFACTURERS ASSOCIATION (ABMA/BOIL)

183      AMERICAN BOILER MANUFACTURERS ASSOCIATION (ABMA/BOIL)

184      ABMA Boiler 103 (2001) Selected Codes and Standards of the Boiler Industry

185      ABMA Boiler 203 (2002) A Guide to Clean and Efficient Operation of Coal-Stoker-Fired Boilers

186      ABMA Boiler 402 (2005) Boiler Water Quality Requirements and Associated Steam Quality for Industrial/Commercial and Institutional Boilers

187      AMERICAN BUREAU OF SHIPPING (ABS)

188      ABS 2 (2014; E 2014; CORR 2014) Rules for Building and Classing Steel Vessels

189      AMERICAN CONCRETE INSTITUTE INTERNATIONAL (ACI)

190      ACI 117 (2010; Errata 2011) Specifications for Tolerances for Concrete Construction and Materials and Commentary

191      ACI 121R (2008) Guide for Concrete Construction Quality Systems in Conformance with ISO 9001

192      ACI 201.1R (2008) Guide for Conducting a Visual Inspection of Concrete in Service

193      ACI 201.2R (2008) Guide to Durable Concrete

194      ACI 211.1 (1991; R 2009) Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete

195      ACI 211.2 (1998; R 2004) Standard Practice for Selecting Proportions for Structural Lightweight Concrete

196      ACI 211.3R (2002; R 2009) Guide for Selecting Proportions for No-Slump Concrete

197      ACI 211.5R (2001; R 2009) Guide for Submittal of Concrete Proportions

198      ACI 212.3R (2010) Chemical Admixtures for Concrete

199      ACI 213R (2003) Guide for Structural Lightweight-Aggregate Concrete

200      ACI 214R (2011) Evaluation of Strength Test Results of Concrete

201      ACI 224.1R (2007) Causes, Evaluation, and Repair of Cracks in Concrete Structures

202      ACI 301 (2010; Errata 2011) Specifications for Structural Concrete

203      ACI 301M (2010) Metric Specifications for Structural Concrete

204      ACI 302.1R (2004; Errata 2006; Errata 2007) Guide for Concrete Floor and Slab Construction

205      ACI 303R (2012) Guide to Cast-In-Place Architectural Concrete Practice

206      ACI 304.2R (1996; R 2008) Placing Concrete by Pumping Methods

207      ACI 304R (2000; R 2009) Guide for Measuring, Mixing, Transporting, and Placing Concrete

208      ACI 305.1 (2006) Specification for Hot Weather Concreting

209      ACI 305R (2010) Guide to Hot Weather Concreting

210      ACI 306.1 (1990; R 2002) Standard Specification for Cold Weather Concreting

211      ACI 306R (2010) Guide to Cold Weather Concreting

212      ACI 308.1 (2011) Specification for Curing Concrete

213      ACI 308R (2001; R 2008) Guide to Curing Concrete

214      ACI 309R (2005) Guide for Consolidation of Concrete

215      ACI 311.4R (2005) Guide for Concrete Inspection

216      ACI 318 (2011; Errata 1 2011; Errata 2 2012; Errata 3-4 2013) Building Code Requirements for Structural Concrete and Commentary

217      ACI 318M (2011; Errata 2013) Building Code Requirements for Structural Concrete & Commentary

218      ACI 325.12R (2002) Guide for Design of Jointed Concrete Pavements for Streets and Local Roads

219      ACI 330R (2008) Guide for the Design and Construction of Concrete Parking Lots

220      ACI 336.1 (2001) Specification for the Construction of Drilled Piers

221      ACI 346 (2009) Specification for Cast-in-Place Concrete Pipe

222      ACI 347 (2004; Errata 2008; Errata 2012) Guide to Formwork for Concrete

223      ACI 364.1R (2007) Guide for Evaluation of Concrete Structures Before Rehabilitation

224      ACI 364.3R (2009) Guide for Cementitious Repair Material Data Sheet

225      ACI 437R (2003) Strength Evaluation of Existing Concrete Buildings

226      ACI 440.2R (2008; Errata 2009; Errata 2010) Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

227      ACI 440.3R (2012) Guide Test Methods for Fiber-Reinforced Polymer (FRP) for Reinforcing or Strengthening Concrete Structures

228      ACI 503.1-503.4 (1992, R 2003) Four Epoxy Specifications

229      ACI 506.2 (2013) Specification for Materials, Proportioning, and Application of Shotcrete

230      ACI 522.1 (2013) Specification For Pervious Concrete Pavement

231      ACI 523.4R (2009) Guide for Design and Construction with Autoclaved Aerated Concrete Panels

232      ACI 530/530.1 (2011; Errata 2011; Errata 2013) Building Code Requirements and Specification for Masonry Structures and Related Commentaries

233      ACI 548.4 (2011) Standard Specification for Latex-Modified Concrete (LMC) Overlays

234      ACI 551.1R (2005) Tilt-up Concrete Construction Guide

235      ACI C-10 (1990) Repair and Rehabilitation of Concrete Structures

236      ACI C-20 (1992) Repair and Rehabilitation II

237      ACI C-21 (1992) Elevated Slabs

238      ACI CP-50 (2007) Tilt-Up Supervisor & Technician Reference Guide

239      ACI CP-60 (2009) Craftman Workbook for ACI Certification of Shotcrete Nozzleman

240      ACI MCP SET (2013) Manual of Concrete Practice

241      ACI SP-15 (2011) Field Reference Manual: Standard Specifications for Structural Concrete ACI 301-05 with Selected ACI References

242      ACI SP-2 (2007; Abstract: 10th Edition) ACI Manual of Concrete Inspection

243      ACI SP-66 (2004) ACI Detailing Manual

244      ACI/MCP-2 (2013) Manual of Concrete Practice Part 2

245      ACI/MCP-3 (2013) Manual of Concrete Practice Part 3

246      ACI/MCP-4 (2013) Manual of Concrete Practice Part 4 AMERICAN CONCRETE PIPE ASSOCIATION (ACPA)

247      AMERICAN CONCRETE PIPE ASSOCIATION (ACPA)

248      ACPA 01-102 (2000) Concrete Pipe Handbook

249      ACPA 01-103 (2000) Concrete Pipe Installation Manual

250      ACPA 01-110 (1984) Design Manual for Sulfide and Corrosion Prediction and Control

251      ACPA QPC (2005; Ver 3.0) QCast Plant Certification Manual AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)

252      AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)

253      ACGIH 0100 (2001; Supplements 2002-2008) Documentation of the Threshold Limit Values and Biological Exposure Indices

254      ACGIH 0112 (2011) TLVs and BEIs

255      ACGIH-2092M (2004) Industrial Ventilation: A Manual of Recommended Practice(Metric)

256      ACGIH-2092S (2004) Industrial Ventilation: A Manual of Recommended Practice

257      ACGIH-2097 (2013) Industrial Ventilation: A Manual of Recommended Practice for Design

258      AMERICAN FOREST & PAPER ASSOCIATION (AF&PA)

259      AF&PA T101 (2005) National Design Specification (NDS) for Wood Construction

260      AMERICAN GAS ASSOCIATION (AGA)

261      AGA ANSI B109.1 (2000) Diaphragm-Type Gas Displacement Meters (Under 500 cubic ft./hour Capacity)

262      AGA ANSI B109.2 (2000) Diaphragm-Type Gas Displacement Meters (500 cubic ft./hour Capacity and Over)

263      AGA ANSI B109.3 (2000) Rotary-Type Gas Displacement Meters

264      AGA GMC Gas Measurement Committee Report No. 3

265      AGA Report No 3 (2000; 4th Ed) Orifice Metering of Natural Gas; PART 2: Specification and Installation Requirements

266      AGA XR0603 (2006; 8th Ed) AGA Plastic Pipe Manual for Gas Service

267      AGA Z223.1 (2012) National Fuel Gas Code AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)

268      AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)

269      AGMA 2015/915-1 (2002A) Accuracy Classification System – Tangential Measurement Tolerance Tables for Cylindrical Gears

270      AGMA 908 (1989B; R 1999) Information Sheet: Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth

271      AGMA ISO 10064-6 (2010A) Code of Inspection Practice – Part 6: Bevel Gear Measurement Methods

272      AGMA ISO 17485 (2008A; Supplement 2008) Bevel Gears – ISO System of Accuracy (Including Supplement – Tolerance Tables 2008)

273      ANSI/AGMA 2001 (2004D; R 2010) Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth

274      ANSI/AGMA 2003 (2010D) Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, ZEROL Bevel, and Spiral Bevel Gear Teeth

275      ANSI/AGMA 2004 (2008C) Gear Materials, Heat Treatment and Processing Manual

276      ANSI/AGMA 2005 (2003D; R 2008) Design Manual for Bevel Gears

277      ANSI/AGMA 2009 (2001B; R 2008) Bevel Gear Classification, Tolerances, and Inspection Methods

278      ANSI/AGMA 2011 (1998A; R 2004) Cylindrical Wormgearing Tolerance and Inspection Methods

279      ANSI/AGMA 2015-1 (2001A; R 2008) Accuracy Classification System – Tangential Measurements for Cylindrical Gears

280      ANSI/AGMA 6001 (2008E) Design and Selection of Components for Enclosed Gear Drives

281      ANSI/AGMA 6011 (2003I; R 2008) Specifications for High Speed Helical Gear Units

282      ANSI/AGMA 6013 (2006A; R 2011) Standard for Industrial Enclosed Gear Drives

283      ANSI/AGMA 6025 (1998D; R 2010) Sound for Enclosed Helical, Herringbone and Spiral Bevel Gear Drives

284      ANSI/AGMA 6034 (1992B; R 2005) Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors

285      ANSI/AGMA 6113 (2006A; R 2011) Standard for Industrial Enclosed Gear Drives (Metric Edition)

286      ANSI/AGMA 6123 (2006B) Design Manual for Enclosed Epicyclic Gear Drives

287      ANSI/AGMA 9000 (2011D) Flexible Couplings – Potential Unbalance Classification

288      ANSI/AGMA 9002 (2004B; R 2011) Bores and Keyways for Flexible Couplings (Inch Series)

289      ANSI/AGMA 9005 (2002E; R 2008) Industrial Gear Lubrication AMERICAN HARDBOARD ASSOCIATION (AHA)

290      AMERICAN HARDBOARD ASSOCIATION (AHA)

291      AHA A135.4 (1995; R 2004) Basic Hardboard

292      AHA A135.6 (1998; R 2006) Hardboard Siding AMERICAN INDUSTRIAL HYGIENE ASSOCIATION (AIHA)

293      AIHA IMOM08-679 (2008) Recognition, Evaluation, and Control of Indoor Mold

294      AIHA Z88.6 (2006) Respiratory Protection – Respirator Use-Physical Qualifications for Personnel

295      AIHA Z9.3 (2007) Spray Finishing Operations – Safety Code for Design, Construction and Ventilation AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)

296      AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)

297      AISC 201 (2006) AISC Certification Program for Structural Steel Fabricators

298      AISC 303 (2010) Code of Standard Practice for Steel Buildings and Bridges

299      AISC 325 (2011) Steel Construction Manual

300      AISC 326 (2009) Detailing for Steel Construction

301      AISC 341 (2010) Seismic Provisions for Structural Steel Buildings

302      AISC 360 (2010) Specification for Structural Steel Buildings

303      AISC DESIGN GUIDE 10 (1997) Erection Bracing of Low-Rise Structural Steel Buildings AMERICAN INSTITUTE OF TIMBER CONSTRUCTION (AITC)

304      AMERICAN INSTITUTE OF TIMBER CONSTRUCTION (AITC)

305      AITC 109 (2007) Standard for Preservative Treatment of Structural Glued Laminated Timber

306      AITC 110 (2001) Standard Appearance Grades for Structural Glued Laminated Timber

307      AITC 111 (2005) Recommended Practice for Protection of Structural Glued Laminated Timber During Transit, Storage and Erection

308      AITC 113 (2010) Standard for Dimensions of Structural Glued Laminated Timber

309      AITC 117 (2010) Standard Specifications for Structural Glued Laminated Timber of Softwood Species, Design and Manufacturing Requirements

310      AITC 119 (1996) Standard Specifications for Structural Glued Laminated Timber of Hardwood Species

311      AITC 200 (2009) Manufacturing Quality Control Systems Manual

312      AITC TCM (2004; Errata 2010) Timber Construction Manual, 5th Edition

313      ANSI/AITC A190.1 (2007) American National Standard, Structural Glued Laminated Timber AMERICAN IRON AND STEEL INSTITUTE (AISI)

314      AMERICAN IRON AND STEEL INSTITUTE (AISI)

315      AISC/AISI 121 (2004) Standard Definitions for Use in the Design of Steel Structures

316      AISI D100 (1991; R 2008) Cold-Formed Steel Design Manual

317      AISI E 1 (2011) Steel Plate Engineering Data Series – Design of Plate Structures, Volumes I & II

318      AISI S100 (2007; Supp 1: 2009; Supp 2: 2010) North American Specification for the Design of Cold-Formed Steel Structural Members

319      AISI S200 (2007) North American Standard for Cold-Formed Steel Framing – General Provision

320      AISI S201 (2007) North American Standard for Cold-Formed Steel Framing – Product Data

321      AISI S202 (2011) Code of Standard Practice for Cold-formed Steel Structural Framing

322      AISI S211 (2007) North American Standard for Cold-Formed Steel Framing – Wall Stud Design

323      AISI S212 (2007) North American Standard for Cold-Formed Steel Framing – Header Design

324      AISI S213 (2007; Suppl 1 2009) North American Standard for Cold-Formed Steel Framing – Lateral Design

325      AISI SG-971-Spec (1996; R 2001; Suppl 1) Specification and Commentary for the Design of Cold-Formed Steel Structural Members

326      AISI SG02-KIT (2001; Supp 1 2004) North American Specification for the Design of Cold-Formed Steel Structural Members

327      AISI SG03-3 (2002; Suppl 2001-2004; R 2008) Cold-Formed Steel Design Manual Set

328      AMERICAN LADDER INSTITUTE (ALI/LADDER)

329      ALI/LADDER A14.3 (2008) Standard for Fixed Ladders and Safety Requirements

330      AMERICAN LUMBER STANDARDS COMMITTEE (ALSC)

331      ALSC PS 20 (2010) American Softwood Lumber Standard

332      AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

333      ANSI A108.11 (1992; Reaffirmed 2005) Specifications for Interior Installation of Cementitious Backer Units

334      ANSI A137.1 (2012) American National Standards Specifications for Ceramic Tile

335      ANSI A137.2 (2012) American National Standards Specifications for Glass Tile

336      ANSI A161.2 (1998) Decorative Laminate Countertops, Performance Standards for Fabricated High Pressure

337      ANSI A48.1 (1986) Concrete Construction – Forms for One Way Concrete Joist Construction

338      ANSI A48.2 (1986) Concrete Construction – Forms for Two Way Concrete Joist Construction

339      ANSI B11/STD B11.0 (2010) Safety of Machinery – General Requirements and Risk Assessment

340      ANSI B11/STD B11.19 (2010) Machines – Performance Criteria for Safeguarding

341      ANSI C12.15 (1990) Solid-State Demand Registers for Electromechanical Watthour Meters

342      ANSI C135.14 (1979) Staples with Rolled or Slash Points for Overhead Line Construction

343      ANSI C37.72 (1987) Standard for Manually-Operated Dead-Front Pad Mounted Switchgear with Load Interrupting Switches and Separable Connections for Alternating-Current Systems

344      ANSI C39.1 (1981; R 1992) Requirements for Electrical Analog Indicating Instruments

345      ANSI C57.12.13 (1982) Conformance Requirements for Liquid-Filled Transformers

346      ANSI INCITS 154 (1988; R 2004) Office Machines and Supplies – Alphanumeric Machines – Keyboard Arrangement

347      ANSI Z21.1 (2010; Addenda A 2011; Addenda B 2012) Household Cooking Gas Appliances

348      ANSI Z21.10.1/CSA 4.1 (2009; Addenda A 2009; Addenda B 2011) Gas Water Heaters Vol. I, Storage Water Heaters with Input Ratings of 75,000 Btu Per Hour or Less

349      ANSI Z21.10.3/CSA 4.3 (2013) Gas Water Heaters Vol.III, Storage Water Heaters With Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous

350      ANSI Z21.13/CSA 4.9 (2013) Gas-Fired Low Pressure Steam and Hot Water Boilers

351      ANSI Z21.15/CSA 9.1 (2013) Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves

352      ANSI Z21.18/CSA 6.3 (2007; Addenda A 2010; Addenda B 2012; R 2013) Gas Appliance Pressure Regulators

353      ANSI Z21.21/CSA 6.5 (2005; Addenda A 2010; Addenda B 2011) Automatic Valves for Gas Appliances

354      ANSI Z21.22/CSA 4.4 (1999; Addenda A 2000, Addenda B 2001; R 2004) Relief Valves for Hot Water Supply Systems

355      ANSI Z21.24/CSA 6.10 (2006; R 2011) Connectors for Gas Appliances

356      ANSI Z21.41/CSA 6.9 (2011) Quick-Disconnect Devices for Use with Gas Fuel Appliances

357      ANSI Z21.45 (1995) Flexible Connectors of Other Than All-Metal Construction for Gas Appliances

358      ANSI Z21.47/CSA 2.3 (2012) Gas-Fired Central Furnaces

359      ANSI Z21.66/CGA 6.14 (1996; R 2001) Automatic Vent Damper Devices for Use with Gas-Fired Appliances

360      ANSI Z21.69/CSA 6.16 (2009; Addenda A 2012) Connectors for Movable Gas Appliances

361      ANSI Z21.78/CSA 6.20 (2010) Standard Specification for Combination Gas Controls for Gas Appliances

362      ANSI Z21.80/CSA 6.22 (2011; Addenda A 2012) Line Pressure Regulators

363      ANSI Z21.86/CSA 2.32 (2008) Vented Gas-Fired Gravity Space Heating Appliances

364      ANSI Z400.1/Z129.1 (2010) Hazardous Industrial Chemicals – Material Safety Data Sheets – Preparation

365      ANSI Z83.19/CSA 2.35 (2009; Addenda A 2011) Gas-Fired High-Intensity Infrared Heaters

366      ANSI Z83.3 (1971; R 1995) Gas Utilization Equipment in Large Boilers

367      ANSI Z83.4/CSA 3.7 (2013) Non-Recirculating Direct Gas-Fired Industrial Air Heaters

368      ANSI Z83.8/CSA 2.6 (2013 American National Standard/CSA Standard for Gas Unit Heater, Gas Packaged Heaters, Gas Utility Heaters and Gas-Fired Duct Furnaces

369      ANSI Z97.1 (2009; Errata 2010) Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test

370      ANSI/SPRI ES-1 (2003) Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems

371      ASC/X9 X9.52 (1998) Triple Data Encryption Algorithm Modes of Operation

372      AMERICAN NURSERY & LANDSCAPE ASSOCIATION (ANLA)

373      ANSI/ANLA Z60.1 (2004) American Standard for Nursery Stock AMERICAN PETROLEUM INSTITUTE (API)

374      AMERICAN PETROLEUM INSTITUTE (API)

375      API 570 (2009, 3rd Ed) Piping Inspection Code: In-Service Inspection, Rating, Repair, and Alteration of Piping Systems

376      API MPMS 2.2A (1995; R 2012) Measurement and Calibration of Upright Cylindrical Tanks by the Manual Strapping Method

377      API MPMS 2.2B (1989; R 2007) Manual of Petroleum Measurement Standards Chapter 2: Tank Calibration – Section 2B: Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method

378      API MPMS 2.2C (2002; R 2008) Manual of Petroleum Measurement Standards Chapter 2: Tank Calibration – Section 2C: Calibration of Upright Cylindrical Tanks Using the Optical Triangulation Method

379      API MPMS 2.2D (2003; R 2009) Manual of Petroleum Measurement Standards Chapter 2: Tank Calibration – Section 2D: Calibration of Upright Cylindrical Tanks Using the Internal Electro-Optical Distance Ranging Method

380      API MPMS 2.2E (2004; Errata 2009; R 2009) Petroleum and Liquid Petroleum Products – Calibration of Horizontal Cylindrical Tanks – Part 1: Manual Methods

381      API PUBL 1628 (1996) A Guide to the Assessment and Remediation of Underground Petroleum Releases

382      API RP 1110 (2013) Pressure Testing of Steel Pipelines for the Transportation of Gas, Petroleum Gas, Hazardous Liquids, Highly Volatile Liquids or Carbon Dioxide

383      API RP 1130 (2007) Computational Pipeline Monitoring for Liquid Pipelines

384      API RP 13B-1 (2009; 4th Ed) Recommended Practice for Field Testing Water-Based Drilling Fluids

385      API RP 1604 (1996; R 2010) Closure of Underground Petroleum Storage Tanks

386      API RP 1615 (2011) Installation of Underground Petroleum Storage Systems

387      API RP 2003 (2008; 7th Ed) Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents

388      API RP 2009 (2002; R 2007; 7th Ed) Safe Welding, Cutting, and Hot Work Practices in Refineries, Gasoline Plants, and Petrochemical Plants

389      API RP 2219 (2005; R 2012) Safe Operation of Vacuum Trucks in Petroleum Service

390      API RP 500 (2012; Errata 2014) Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division and Division 2

391      API RP 540 (1999; R 2004) Electrical Installations in Petroleum Processing Plants

392      API RP 582 (2009) Welding Guidelines for the Chemical, Oil, and Gas Industries

393      API RP 686 (2009) Recommended Practice for Machinery Installation and Installation Design

394      API STD 2217A (2009) Guidelines for Safe Work in Inert Confined Spaces in the Petroleum and Petrochemical Industries

395      API STD 600 (2009; Errata 2009) Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets

396      API STD 608 (2012) Metal Ball Valves – Flanged, Threaded, And Welding End

397      API STD 682 (2004; Errata 2006) Pumps Shaft Sealing Systems For Centrifugal and Rotary Pumps

398      API Spec 13A (2010) Specification for Drilling-Fluid Materials

399      API Spec 15LR (2001; R 2008) Specification for Low Pressure Fiberglass Line Pipe and Fittings

400      API Spec 5CT (2011; Errata 2012) Specification for Casing and Tubing

401      API Spec 5L (2012) Specification for Line Pipe

402      API Spec 6D (2008; Errata 1 2008; Errata 2 2008; Errata 3 2009; Addendum 1 2009; Errata 4 2010; Errata 5 2010; Errata 6 2011; Addendum 2 2011; Addendum 3 2012 ) Specification for Pipeline Valves

403      API Spec 6FA (1999; R 2006; Errata 2006; Errata 2008; R 2011) Specification for Fire Test for Valves

404      API Std 1104 (2013) Welding of Pipeline and Related Facilities

405      API Std 1631 (2001; R 2010) Interior Lining and Periodic Inspection of Underground Storage Tanks

406      API Std 2000 (2009) Venting Atmospheric and Low-Pressure Storage Tanks

407      API Std 2015 (2001; R 2006) Safe Entry and Cleaning of Petroleum Storage Tanks

408      API Std 594 (2010) Check Valves: Flanged, Lug, Wafer and Butt-Welding

409      API Std 598 (2009) Valve Inspecting and Testing

410      API Std 607 (2010) Testing of Valves: Fire Test for Soft-Seated Quarter-Turn Valves

411      API Std 609 (2009) Butterfly Valves: Double Flanged, Lug-and-Wafer Type

412      API Std 610 (2010; Errata 2011) Centrifugal Pumps for Petroleum, Petrochemical, and Natural Gas Industries

413      API Std 618 (2007; Errata 2009; Errata 2010) Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services

414      API Std 619 (2010) Rotary-Type Positive Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries

415      API Std 650 (2013; Errata 2013) Welded Tanks for Oil Storage

416      API Std 653 (2009; Addendum 1 2010; Addendum 2 2012; Addendum 3 2013) Tank Inspection, Repair, Alteration, and Reconstruction

417      API Std 672 (2004; Errata 2007; Errata 2010) Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services

418      AMERICAN RAILWAY ENGINEERING AND MAINTENANCE-OF-WAY ASSOCIATION

419      AREMA Eng Man (2012) Manual for Railway Engineering

420      AREMA Track Plans (2008) Portfolio of Trackwork Plans AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING (ASNT)

421      AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING (ASNT)

422      ANSI/ASNT CP-189 (2011) ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel (ANSI/ASNT CP-105-2006)

423      ASNT CP-105 (2011) ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel – Item No. 2821

424      ASNT SNT-TC-1A (2011; Text Correction 2013) Recommended Practice for Personnel Qualification and Certification in Nondestructive Testing

425      ASNT SNT-TC-1A Q&A Bk A (2010) Supplement to Recommended Practice No. SNT-TC-1A (Q&A Book): Radiographic Testing Method

426      ASNT SNT-TC-1A Q&A Bk B (2007) Supplement to Recommended Practice SNT-TC-1A (Q&A Book): Magnetic Particle Method

427      ASNT SNT-TC-1A Q&A Bk C (2011; Text Correction 2011) Supplement to Recommended Practice No. SNT-TC-1A (Q&A Book): Ultrasonic Testing Method

428      ASNT SNT-TC-1A Q&A Bk D (2011; Text Correction 2011) Supplement to Recommended Practice No. SNT-TC-1A (Q&A Book): Liquid Penetrant Testing Method

429      AMERICAN SOCIETY FOR QUALITY (ASQ)

430      ANSI/ASQ Z1.4 (2008; R 2013) Sampling Procedures and Tables for Inspection by Attributes

431      AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)

432      ASCE 2-06 (2007) Measurement of Oxygen Transfer in Clean Water

433      ASCE 25-06 (2008) Earthquake-Activated Automatic Gas Shutoff Devices

434      ASCE 7 (2010; Errata 2011; Supp 1 2013) Minimum Design Loads for Buildings and Other Structures

435      ASCE Report No. 13 (1961) Filtering Materials for Sewage Treatment Plants

436      AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE)

437      ANSI/ASHRAE 15 & 34 (2013) ANSI/ASHRAE Standard 15-Safety Standard for Refrigeration Systems and ANSI/ASHRAE Standard 34-Designation and Safety Classification of Refrigerants

438      ASHRAE 113 (2013) Method of Testing for Room Air Diffusion

439      ASHRAE 127 (2012) Method of Testing for Rating Computer and Data Processing Room Unitary Air-Conditioners

440      ASHRAE 130 (2008) Method of Testing for Rating Ducted Air Terminal Units

441      ASHRAE 135 (2012; Errata 1 2013; INT 1-7 2013; Errata 2 2013) BACnet—A Data Communication Protocol for Building Automation and Control Networks

442      ASHRAE 146 (2011) Method of Testing and Rating Pool Heaters

443      ASHRAE 17 (2008) Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves

444      ASHRAE 189.1 (2011; Errata 1-2 2012; INT 1 2013; Errata 3-8 2013) Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings

445      ASHRAE 23 (2005) Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units

446      ASHRAE 23.1 (2010) Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units that Operate at Subcritical Temperatures of the Refrigerant

447      ASHRAE 33 (2000) Method of Testing Forced Circulation Air Cooling and Air Heating Coils

448      ASHRAE 51 (2007) Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

449      ASHRAE 52.1 (1992; Interpretation 1 2007) Gravimetric and Dust-Spot Procedures for Testing Air-Cleaning Devices Used in General Ventilation for Removing Particulate Matter

450      ASHRAE 52.2 (2012; Errata 2013) Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size

451      ASHRAE 55 (2010; Errata 2011; Addenda A 2011; Addenda B, C, D, E and F 2012; Errata 2012; Addenda G, H, I, J, K, L, M, N, O, P, Q and R ) Thermal Environmental Conditions for Human Occupancy

452      ASHRAE 62.1 (2010; Errata 2011; INT 3 2012; INT 4 2012; INT 5 2013) Ventilation for Acceptable Indoor Air Quality

453      ASHRAE 64 (2011) Methods of Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers

454      ASHRAE 68 (1997) Laboratory Method of Testing to Determine the Sound Power In a Duct

455      ASHRAE 70 (2006; R 2011) Method of Testing for Rating the Performance of Air Outlets and Inlets

456      ASHRAE 84 (2013; Addenda A 2013) Method of Testing Air-to-Air Heat Exchangers

457      ASHRAE 90.1 – IP (2010; Errata 1-4 2011; INT 1-12 2011; Addenda A, B, C, G, H, J, K, O, P, S, Y, Z, BZ, CG, CI and DS 2012; Errata 5-9 2012; INT 13-16 2012; Errata 10-12 2013; INT 17-18 2013) Energy Standard for Buildings Except Low-Rise Residential Buildings

458      ASHRAE 90.1 – SI (2010; Errata 1-2 2011; INT 2-12 2011; Addenda A, B, C, G, H, J, K, O, P, S, Y, Z, BZ, CG, CI and DS 2012; Errata 3-9 2012; INT 13-16 2012; Errata 10-15 2013; INT 17 2013) Energy Standard for Buildings Except Low-Rise Residential Buildings

459      ASHRAE 90.2 (2007; Addendum B 2010) Energy Efficient Design of Low-Rise Residential Buildings

460      ASHRAE 93 (2010; Errata 2013) Methods of Testing to Determine the Thermal Performance of Solar Collectors

461      ASHRAE 96 (1980; R 1989) Methods of Testing to Determine the Thermal Performance of Unglazed Flat-Plate Liquid-Type Solar Collectors

462      ASHRAE EQUIP IP HDBK (2012) Handbook, HVAC Systems and Equipment (IP Edition)

463      ASHRAE EQUIP SI HDBK (2012) Handbook, HVAC Systems and Equipment (SI Edition)

464      ASHRAE FUN IP (2013) Fundamentals Handbook, I-P Edition

465      ASHRAE FUN SI (2013) Fundamentals Handbook, SI Edition

466      ASHRAE HVAC APP IP HDBK (2011) HVAC Applications Handbook, I-P Edition

467      ASHRAE HVAC APP SI HDBK (2011) HVAC Applications Handbook, SI Edition

468      ASHRAE Item 90376 (1997) Ground-Source Heat Pumps, Design of Geothermal Systems for Commercial and Institutional Buildings

469      ASHRAE RP-935 (1998) Protocol for Field Testing of Tall Buildings to Determine Envelope Air Leakage Rate AMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE/SAFE)

470      AMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE/SAFE)

471      ASSE/SAFE A10.24 (2006) Roofing – Safety Requirements of Low-Sloped Roofs

472      ASSE/SAFE A10.3 (2013) Operations – Safety Requirements for Powder Actuated Fastening Systems

473      ASSE/SAFE A10.32 (2012) Fall Protection

474      ASSE/SAFE A10.34 (2001; R 2012) Protection of the Public on or Adjacent to Construction Sites

475      ASSE/SAFE A10.6 (2006) Safety Requirements for Demolition Operations

476      ASSE/SAFE A1264.1 (2007) Safety Requirements for Workplace Walking/Working Surfaces and Their Access; Workplace, Floor, Wall and Roof Openings; Stairs and Guardrails Systems

477      ASSE/SAFE Z359.1 (2007) Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)

478      AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)

479      ASSE 1001 (2008) Performance Requirements for Atmospheric Type Vacuum Breakers (ANSI approved 2009)

480      ASSE 1003 (2009) Performance Requirements for Water Pressure Reducing Valves for Domestic Water Distribution Systems – (ANSI approved 2010)

481      ASSE 1009 (1990) Performance Requirements for Commercial Food Waste Grinder Units

482      ASSE 1010 (2004) Performance Requirements for Water Hammer Arresters (ANSI approved 2004)

483      ASSE 1011 (2004; Errata 2004) Performance Requirements for Hose Connection Vacuum Breakers (ANSI approved 2004)

484      ASSE 1012 (2009) Performance Requirements for Backflow Preventer with an Intermediate Atmospheric Vent – (ANSI approved 2009)

485      ASSE 1013 (2011) Performance Requirements for Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow Preventers – (ANSI approved 2010)

486      ASSE 1015 (2009) Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies – (ANSI approved 2010)

487      ASSE 1017 (2009) Performance Requirements for Temperature Actuated Mixing Valves for Hot Water Distribution Systems – (ANSI approved 2010)

488      ASSE 1018 (2001) Performance Requirements for Trap Seal Primer Valves – Potable Water Supplied (ANSI Approved 2002

489      ASSE 1019 (2011) Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type (ANSI Approved 2004)

490      ASSE 1020 (2004; Errata 2004; Errata 2004) Performance Requirements for Pressure Vacuum Breaker Assembly (ANSI Approved 2004)

491      ASSE 1037 (1990) Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures

492      ASSE 6000 SERIES (2012) Professional Qualification Standard for Medical Gas Systems Installers, Inspectors and Verifiers

493      ASSE Series 5000 (2009) Cross-Connection Control Professional Qualification Standard

494      ASSE Z9.2 (2012) Fundamentals Governing the Design and Operation of Local Exhaust Ventilation Systems AMERICAN WATER WORKS ASSOCIATION (AWWA)

495      AMERICAN WATER WORKS ASSOCIATION (AWWA)

496      ANSI/AWWA C541 (2008) Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates

497      ANSI/AWWA C542 (2009) Electric Motor Actuators for Valves and Slide Gates

498      AWWA 10084 (2005) Standard Methods for the Examination of Water and Wastewater

499      AWWA A100 (2006; Errata 2007) Water Wells

500      AWWA B100 (2009) Standard for Granular Filter Material

501      AWWA B201 (2013) Soda Ash

502      AWWA B300 (2010; Addenda 2011) Hypochlorites

503      AWWA B301 (2010) Liquid Chlorine

504      AWWA B302 (2010) Ammonium Sulfate

505      AWWA B303 (2010) Sodium Chlorite

506      AWWA B402 (2012) Ferrous Sulfate

507      AWWA B403 (2009) Aluminum Sulfate – Liquid, Ground, or Lump

508      AWWA B404 (2008) Liquid Sodium Silicate

509      AWWA B405 (2006) Sodium Aluminate

510      AWWA B406 (2006) Ferric Sulfate

511      AWWA B407 (2012) Liquid Ferric Chloride

512      AWWA B408 (2010) Liquid Polyaluminum Chloride

513      AWWA B451 (2010) Poly(Diallyldimethylammonium Chloride)

514      AWWA B452 (2006; Addenda 2007) EPI-DMA Polyamines

515      AWWA B453 (2013) Polyacrylomide

516      AWWA B501 (2013) Sodium Hydroxide (Caustic Soda)

517      AWWA B502 (2011) Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate)

518      AWWA B503 (2011) Sodium Tripolyphosphate

519      AWWA B504 (2012) Monosodium Phosphate, Anhydrous

520      AWWA B505 (2012) Disodium Phosphate, Anhydrous

521      AWWA B511 (2010) Standard for Potassium Hydroxide

522      AWWA B550 (2010) Standard for Calcium Chloride

523      AWWA B600 (2010) Powdered Activated Carbon

524      AWWA B601 (2011) Sodium Metabisulfite

525      AWWA B602 (2008) Copper Sulfate

526      AWWA B603 (2010) Permanganates

527      AWWA B604 (2012) Granular Activated Carbon

528      AWWA B605 (2013) Reactivation of Granular Activated Carbon

529      AWWA B701 (2011) Sodium Fluoride

530      AWWA B702 (2011) Sodium Fluorosilicate

531      AWWA B703 (2011) Fluorosilicic Acid

532      AWWA C104/A21.4 (2013) Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water

533      AWWA C105/A21.5 (2010) Polyethylene Encasement for Ductile-Iron Pipe Systems

534      AWWA C110/A21.10 (2012) Ductile-Iron and Gray-Iron Fittings for Water

535      AWWA C111/A21.11 (2012) Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings

536      AWWA C115/A21.15 (2011) Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges

537      AWWA C150/A21.50 (2008) Thickness Design of Ductile-Iron Pipe

538      AWWA C151/A21.51 (2009) Ductile-Iron Pipe, Centrifugally Cast, for Water

539      AWWA C153/A21.53 (2011) Ductile-Iron Compact Fittings for Water Service

540      AWWA C200 (2012) Steel Water Pipe – 6 In. (150 mm) and Larger

541      AWWA C203 (2008) Coal-Tar Protective Coatings and Linings for Steel Water Pipelines – Enamel and Tape – Hot-Applied

542      AWWA C205 (2012) Cement-Mortar Protective Lining and Coating for Steel Water Pipe – 4 In. (100 mm) and Larger – Shop Applied

543      AWWA C206 (2011) Field Welding of Steel Water Pipe

544      AWWA C207 (2013) Standard for Steel Pipe Flanges for Waterworks Service-Sizes 100 mm through 3600 mm 4 in. through 144 in.

545      AWWA C208 (2012) Standard for Dimensions for Fabricated Steel Water Pipe Fittings

546      AWWA C209 (2013) Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections and Fitting for

547      AWWA C210 (2007) Standard for Liquid Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines

548      AWWA C213 (2007) Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines

549      AWWA C214 (2007; Addenda 2010) Tape Coating Systems for the Exterior of Steel Water Pipelines

550      AWWA C215 (2010) Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines

551      AWWA C216 (2007) Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines

552      AWWA C217 (2009) Petrolatum and Petroleum Wax Tape Coatings for the Exterior of Connections and Fittings for Steel Water Pipelines

553      AWWA C218 (2008) Coating the Exterior of Aboveground Steel Water Pipelines and Fittings

554      AWWA C300 (2011) Reinforced Concrete Pressure Pipe, Steel-Cylinder Type

555      AWWA C301 (2007) Prestressed Concrete Pressure Pipe, Steel-Cylinder Type

556      AWWA C302 (2011) Reinforced Concrete Pressure Pipe, Noncylinder Type

557      AWWA C303 (2008) Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type

558      AWWA C500 (2009) Metal-Seated Gate Valves for Water Supply Service

559      AWWA C502 (2005) Dry-Barrel Fire Hydrants

560      AWWA C503 (2005) Wet-Barrel Fire Hydrants

561      AWWA C504 (2010) Standard for Rubber-Seated Butterfly Valves

562      AWWA C508 (2009; Addenda A 2011) Swing-Check Valves for Waterworks Service, 2 In. (50 mm) Through 24 In. (600 mm) NPS

563      AWWA C509 (2009) Resilient-Seated Gate Valves for Water Supply Service

564      AWWA C510 (2007) Standard for Double Check Valve Backflow Prevention Assembly

565      AWWA C511 (2007) Standard for Reduced-Pressure Principle Backflow Prevention Assembly

566      AWWA C515 (2009) Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service

567      AWWA C550 (2013) Protective Epoxy Interior Coatings for Valves and Hydrants

568      AWWA C600 (2010) Installation of Ductile-Iron Water Mains and Their Appurtenances

569      AWWA C605 (2013) Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water

570      AWWA C606 (2011) Grooved and Shouldered Joints

571      AWWA C651 (2005; Errata 2005) Standard for Disinfecting Water Mains

572      AWWA C652 (2011) Disinfection of Water-Storage Facilities

573      AWWA C653 (2013) Disinfection of Water Treatment Plants

574      AWWA C654 (2013) Disinfection of Wells

575      AWWA C700 (2009) Standard for Cold Water Meters – Displacement Type, Bronze Main Case

576      AWWA C701 (2012) Standard for Cold-Water Meters – Turbine Type for Customer Service

577      AWWA C702 (2010) Cold-Water Meters – Compound Type

578      AWWA C703 (2011) Cold-Water Meters – Fire Service Type

579      AWWA C704 (2012) Propeller-Type Meters for Waterworks Applications

580      AWWA C706 (2010) Direct-Reading, Remote-Registration Systems for Cold-Water Meters

581      AWWA C707 (2010) Encoder-Type Remote-Registration Systems for Cold-Water Meters

582      AWWA C800 (2012) Underground Service Line Valves and Fittings

583      AWWA C900 (2007; Errata 2008) Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution

584      AWWA C901 (2008) Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13mm) Through 3 In. (76 mm), for Water Service

585      AWWA C905 (2010; Errata 2012) Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings 14 In. Through 48 In. (350 mm through 1,200 mm) for Water Transmission and Distribution

586      AWWA C906 (2007) Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) through 63 In., (1,575 mm) for Water Distribution and Transmission

587      AWWA C909 (2009) Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 IN through 24 IN (100 mm Through 600 mm), for Water, Wastewater, and Reclaimed Water Service

588      AWWA C950 (2013) Fiberglass Pressure Pipe

589      AWWA D100 (2011) Welded Steel Tanks for Water Storage

590      AWWA D102 (2011) Coating Steel Water-Storage Tanks

591      AWWA D103 (2009; Errata 2010) Factory-Coated Bolted Steel Tanks for Water Storage

592      AWWA D104 (2011) Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks

593      AWWA D110 (2013) Wire- and Strand Wound, Circular, Prestressed Concrete Water Tanks

594      AWWA D120 (2009) Thermosetting Fiberglass-Reinforced Plastic Tanks

595      AWWA E101 (1988) Vertical Turbine Pumps – Line Shaft and Submersible Types

596      AWWA M11 (2004; 4th Ed) Manual: Steel Water Pipe: A Guide for Design and Installation

597      AWWA M14 (2004; 3rd Ed) Manual: Recommended Practice for Backflow Prevention and Cross-Connection Control

598      AWWA M23 (2002; 2nd Ed) Manual: PVC Pipe – Design and Installation

599      AWWA M45 (2013; 3rd Ed) Fiberglass Pipe Design

600      AWWA M9 (2008; Errata 2013) Manual: Concrete Pressure Pipe AMERICAN WELDING SOCIETY (AWS)

601      AMERICAN WELDING SOCIETY (AWS)

602      AWS A2.4 (2012) Standard Symbols for Welding, Brazing and Nondestructive Examination

603      AWS A3.0M/A3.0 (2010) Standard Welding Terms and Definitions

604      AWS A5.01M/A5.01 (2013) Procurement Guidelines for Consumables – Welding and Allied Processes – Flux and Gas Shielded Electrical Welding Processes

605      AWS A5.1/A5.1M (2012) Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

606      AWS A5.10/A5.10M (2012) Welding Consumables – Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification

607      AWS A5.11/A5.11M (2010) Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding

608      AWS A5.13 (2010) Specification for Surfacing Electrodes for Shielded Metal Arc Welding

609      AWS A5.13/A5.13M (2010) Specification for Surfacing Electrodes for Shielded Metal Arc Welding

610      AWS A5.14/A5.14M (2011) Specification for Nickel and Nickel Alloy Bare Welding Electrodes and Rods

611      AWS A5.18/A5.18M (2005) Carbon Steel Filler Metals for Gas Shielded Arc Welding

612      AWS A5.22/A5.22M (2012) Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes and Rods

613      AWS A5.3/A5.3M (1999; R 2007) Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding

614      AWS A5.32/A5.32M (2011) Specification for Welding Shielding Gases

615      AWS A5.36/A5.36M (2012) Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding

616      AWS A5.4/A5.4M (2012) Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding

617      AWS A5.5/A5.5M (2006) Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding

618      AWS A5.8/A5.8M (2011; Amendment 2012) Specification for Filler Metals for Brazing and Braze Welding

619      AWS A5.9/A5.9M (2012) Specification for Bare Stainless Steel Welding Electrodes and Rods

620      AWS B2.1/B2.1M (2009) Specification for Welding Procedure and Performance Qualification

621      AWS B2.2/B2.2M (2010) Specification for Brazing Procedure and Performance Qualification

622      AWS BRH (2007; 5th Ed) Brazing Handbook

623      AWS C1.1M/C1.1 (2012) Recommended Practices for Resistance Welding

624      AWS C2.18 (1993; Errata 1993; R 2001) Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites

625      AWS C2.25/C2.25M (2012) Specification for Thermal Spray Feedstock — Solid and Composite Wire and Ceramic Rods

626      AWS C5.5/C5.5M (2003) Recommended Practices for Gas Tungsten Arc Welding

627      AWS D1.1/D1.1M (2010; Errata 2011) Structural Welding Code – Steel

628      AWS D1.2/D1.2M (2008) Structural Welding Code – Aluminum

629      AWS D1.3/D1.3M (2008; Errata 2008) Structural Welding Code – Sheet Steel AWS D1.4/D1.4M (2011) Structural Welding Code – Reinforcing Steel

630      AWS D1.4/D1.4M (2011) Structural Welding Code – Reinforcing Steel

631      AWS D1.5M/D1.5 (2010) Bridge Welding Code

632      AWS D1.8/D1.8M (2009) Structural Welding Code—Seismic Supplement

633      AWS D10.10/D10.10M (1999; R 2009) Recommended Practices for Local Heating of Welds in Piping and Tubing

634      AWS D10.11M/D10.11 (2007) Guide for Root Pass Welding of Pipe Without Backing

635      AWS D10.12M/D10.12 (2000) Guideline for Welding Mild Steel Pipe

636      AWS D10.4 (1986; R 2000) Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing

637      AWS D10.7/D10.7M (2008) Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe

638      AWS D14.1/D14.1M (2005) Specification for Welding Industrial and Mill Cranes and Other Material Handling Equipment

639      AWS D14.4/D14.4M (2012) Specification for Welded Joints for Machinery and Equipment

640      AWS D9.1M/D9.1 (2012) Sheet Metal Welding Code

641      AWS QC1 (2007) Standard for AWS Certification of Welding Inspectors

642      AWS QC7 (1993; Suppl G) Standard for AWS Certified Welders

643      AWS WHB-2.9 (2004) Welding Handbook; Volume 2, Welding Processes, Part 1

644      AWS WHB-4.8 (1998) Welding Handbook, Volume 4 – Materials and Applications Part 2

645      AWS Z49.1 (2012) Safety in Welding and Cutting and Allied Processes

646      AWS-03 (2011) Welding Handbook, Volumes 1 thru 4 AMERICAN WOOD COUNCIL (AWC)

647      AMERICAN WOOD COUNCIL (AWC)

648      AWC NDS (2012) National Design Specification (NDS) for Wood Construction

649      AWC WFCM (2012) Wood Frame Construction Manual for One- and Two-Family Dwellings AMERICAN WOOD PROTECTION ASSOCIATION (AWPA)

650      AMERICAN WOOD PROTECTION ASSOCIATION (AWPA)

651      AWPA A1 (2011) Standard Methods for Analysis of Creosote and Oil-Type Preservatives

652      AWPA A2 (2011) Standard Methods for Analysis of Waterborne Preservatives and Fire-Retardant Formulations

653      AWPA A3 (2008) Standard Method for Determining Penetration of Preservatives and Fire Retardants

654      AWPA A4 (2011) Standard Methods for Sampling Wood Preservatives

655      AWPA A5 (2011) Standard Methods for Analysis of Oil-Borne Preservatives

656      AWPA A6 (2009) Standard Method for the Determination of Oil-Type Preservatives from Small Samples

657      AWPA A8 (1990) Qualitative Recovery of Creosote or Creosote Solution from Freshly Treated Piles, Poles, or Timber (Squeeze Method)

658      AWPA A9 (2013) Standard Method for Analysis of Treated Wood and Treating Solutions by X-Ray Spectroscopy

659      AWPA BOOK (2012) AWPA Book of Standards

660      AWPA C1 (2003) All Timber Products – Preservative Treatment by Pressure Processes

661      AWPA C18 (2003) Standard For Pressure Treated Material in Marine Construction

662      AWPA C2 (2003) Lumber, Timber, Bridge Ties and Mine Ties – Preservative Treatment by Pressure Processes

663      AWPA C20 (2003) Structural Lumber Fire-Retardant Treatment by Pressure Processes

664      AWPA C25 (2003) Sawn Crossarms – Preservative Treatment by Pressure Processes

665      AWPA C27 (2002) Plywood – Fire-Retardant Treatment by Pressure Processes

666      AWPA C28 (2003) Standard for Preservative Treatment of Structural Glued Laminated Members and Lamination Before Gluing of Southern Pine, Coastal Douglas Fir, Hemfir and Western Hemlock by Pressure Processes

667      AWPA C3 (2003) Piles – Preservative Treatment by Pressure Processes

668      AWPA C33 (2003) Standard for Preservative Treatment of Structural Composite Lumber by Pressure Processes

669      AWPA C4 (2003) Poles – Preservative Treatment by Pressure Processes

670      AWPA C6 (1999) Crossties and Switch Ties – Preservative Treatment by Pressure Processes

671      AWPA C9 (2003) Plywood – Preservative Treatment by Pressure Processes

672      AWPA M1 (2012) Standard for the Purchase of Treated Wood Products

673      AWPA M2 (2011) Standard for Inspection of Treated Wood Products

674      AWPA M3 (2013) Standard Quality Control Procedures for Wood Preserving Plants

675      AWPA M4 (2011) Standard for the Care of Preservative-Treated Wood Products

676      AWPA M6 (2013) Brands Used on Preservative Treated Materials

677      AWPA P1/P13 (2009) Standard for Creosote Preservative

678      AWPA P18 (2010) Nonpressure Preservatives

679      AWPA P2 (2009) Standard for Creosote Solutions

680      AWPA P3 (2009) Standard for Creosote – Petroleum Oil Solution

681      AWPA P49 (2010) Standard for Fire Retardant FR-1

682      AWPA P5 (2007) Standard for Waterborne Preservatives

683      AWPA P8 (2006) Standard for Oil-Borne Preservatives

684      AWPA P9 (2010) Standards for Solvents and Formulations for Organic Preservative Systems

685      AWPA T1 (2013) Use Category System: Processing and Treatment Standard

686      AWPA U1 (2013) Use Category System: User Specification for Treated Wood

687      APA – THE ENGINEERED WOOD ASSOCIATION (APA)

688      APA E30 (2011) Engineered Wood Construction Guide

689      APA E445 (2002) Performance Standards and Qualification Policy for Structural-Use Panels (APA PRP-108)

690      APA EWCG (2011) Engineered Wood Construction Guide: Building Requirements and Related Panel Systems

691      APA EWS R540 (2007) Builder Tips Proper Storage and Handling of Glulam Beams

692      APA EWS T300 (2007) Technical Note: Glulam Connection Details

693      APA F405 (1999) Performance Rated Panels

694      APA L870 (2010) Voluntary Product Standard, PS 1-09, Structural Plywood

695      APA PS 1 (2009) Structural Plywood (with Typical APA Trademarks)

696      APA S350 (2011) Performance Standard for Wood-Based Structural-Use Panels

697      ARCHITECTURAL WOODWORK INSTITUTE (AWI) AWI AWS (2009) Architectural Woodwork Standards

698      ARCNET TRADE ASSOCIATION (ATA)

699      ATA 878.1 (1999) Local Area Network: Token Bus

700      ASM INTERNATIONAL (ASM)

701      ASM 06118G (1993) ASM Metals Reference Book (3rd Ed)

702      ASM STFA (2001; 6th Ed) The Surface Treatment and Finishing of Aluminum and Its Alloys (2 Vol.)

703      ASME INTERNATIONAL (ASME)

704      ASME A112.1.2 (2012) Standard for Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)

705      ASME A112.14.1 (2003; R 2012) Backwater Valves

706      ASME A112.18.1/CSA B125.1(2012) Plumbing Supply Fittings

707      ASME A112.19.1/CSA B45.2(2013) Enameled Cast Iron and Enameled Steel Plumbing Fixtures

708      ASME A112.19.17 (2010) Manufactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems

709      ASME A112.19.2/CSA B45.1(2013) Standard for Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals

710      ASME A112.19.3/CSA B45.4(2008; R 2013) Stainless Steel Plumbing Fixtures

711      ASME A112.19.5 (2011) Trim for Water-Closet Bowls, Tanks and Urinals

712      ASME A112.19.8 (2007; Addenda A 2008; Addenda B 2009) Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, And Hot Tubs

713      ASME A112.36.2M (1991; R 2012) Cleanouts

714      ASME A112.6.1M (1997; R 2012) Floor Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use

715      ASME A112.6.3 (2001; R 2007) Standard for Floor and Trench Drains

716      ASME A112.6.4 (2003: R 2012) Roof, Deck and Balcony Drains

717      ASME A13.1 (2007; R 2013) Scheme for the Identification of Piping Systems

718      ASME A17.1/CSA B44 (2013) Safety Code for Elevators and Escalators

719      ASME A17.2 (2012) Guide for Inspection of Elevators, Escalators, and Moving Walks Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic Elevators, and Escalators and Moving Walks

720      ASME A17.3 (2011) Safety Code for Existing Elevators and Escalators

721      ASME AG 1 (2012) Code on Nuclear Air and Gas Treatment

722      ASME B1.1 (2003; R 2008) Unified Inch Screw Threads (UN and UNR Thread Form)

723      ASME B1.2 (1983; Errata 1992; R 2007) Gages and Gaging for Unified Inch Screw Threads

724      ASME B1.20.1 (2013) Pipe Threads, General Purpose (Inch)

725      ASME B1.20.2M (2006; R 2011) Pipe Threads, 60 Deg. General Purpose (Metric)

726      ASME B1.20.3 (1976; R 2013) Dryseal Pipe Threads (Inch)

727      ASME B1.20.7 (1991; R 2013) Standard for Hose Coupling Screw Threads (Inch)

728      ASME B1.21M (1997; R 2013) Standard for Metric Screw Threads – MJ Profile

729      ASME B16.1 (2010) Gray Iron Pipe Flanges and Flanged Fittings Classes 25, 125, and 250

730      ASME B16.10 (2009) Face-to-Face and End-to-End Dimensions of Valves

731      ASME B16.11 (2011) Forged Fittings, Socket-Welding and Threaded

732      ASME B16.12 (2009) Cast Iron Threaded Drainage Fittings

733      ASME B16.15 (2013) Cast Copper Alloy Threaded Fittings Classes 125 and 250

734      ASME B16.18 (2012) Cast Copper Alloy Solder Joint Pressure Fittings

735      ASME B16.20 (2012) Metallic Gaskets for Pipe Flanges – Ring-Joint, Spiral Wound, and Jacketed

736      ASME B16.21 (2011) Nonmetallic Flat Gaskets for Pipe Flanges

737      ASME B16.22 (2013) Standard for Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

738      ASME B16.23 (2011) Cast Copper Alloy Solder Joint Drainage Fittings – DWV

739      ASME B16.24 (2011) Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500, and 2500

740      ASME B16.25 (2012) Standard for Buttwelding Ends

741      ASME B16.26 (2013) Standard for Cast Copper Alloy Fittings for Flared Copper Tubes

742      ASME B16.29 (2012) Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings – DWV

743      ASME B16.3 (2011) Malleable Iron Threaded Fittings, Classes 150 and 300

744      ASME B16.33 (2012) Manually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 125 psi, Sizes NPS 1/2 – NPS 2

745      ASME B16.34 (2013) Valves – Flanged, Threaded and Welding End

746      ASME B16.36 (2009) Orifice Flanges

747      ASME B16.38 (2012) Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum)

748      ASME B16.39 (2009) Standard for Malleable Iron Threaded Pipe Unions; Classes 150, 250, and 300

749      ASME B16.4 (2011) Standard for Gray Iron Threaded Fittings; Classes 125 and 250

750      ASME B16.40 (2013) Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems

751      ASME B16.42 (2011) Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300

752      ASME B16.5 (2013) Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24 Metric/Inch Standard

753      ASME B16.50 (2013) Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings

754      ASME B16.9 (2012) Standard for Factory-Made Wrought Steel Buttwelding Fittings

755      ASME B17.1 (1967; R 2013) Keys and Keyseats

756      ASME B17.2 (1967; R 2013) Woodruff Keys and Keyseats

757      ASME B18.13 (1996; Addenda A 1998; R 2013) Screw and Washer Assemblies – Sems (Inch Series)

758      ASME B18.13.1M (2011) Screw and Washer Assemblies-SEMS (Metric Series)

759      ASME B18.2.1 (2012; Errata 2013) Square and Hex Bolts and Screws (Inch Series)

760      ASME B18.2.2 (2010) Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

761      ASME B18.2.3.8M (1981; R 2005) Metric Hex Lag Screws

762      ASME B18.2.6 (2010; Supp 2011) Fasteners for Use in Structural Applications

763      ASME B18.2.6M (2012) Metric Fasteners for Use in Structural Applications

764      ASME B18.21.1 (2009) Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series)

765      ASME B18.21.2M (1999; R 2005; R 2014) Lock Washers (Metric Series)

766      ASME B18.22M (1981; R 2010) Metric Plain Washers

767      ASME B18.24 (2004; Addenda A 2006; R 2011) Part Identifying Number (PIN) Code System Standard for B18 Fastener Products

768      ASME B18.27 (1998; R 2010) Tapered and Reduced Cross Section Retaining Rings (Inch Series)

769      ASME B18.3.3M (1986; R 2008) Hexagon Socket Head Shoulder Screws (Metric Series)

770      ASME B18.5.2.1M (2006; R 2011) Metric Round Head Short Square Neck Bolts

771      ASME B18.5.2.2M (1982; R 2010) Metric Round Head Square Neck Bolts

772      ASME B18.6.1 (1981; R 2008) Wood Screws (Inch Series)

773      ASME B18.6.2 (1998; R 2010) Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws: Inch Series

774      ASME B18.6.3 (2013) Machine Screws, Tapping Screws, and Machine Drive Screws (Inch Series)

775      ASME B18.6.5M (2000; R 2010) Standard Specification for Metric Thread-Forming and Thread-Cutting Tapping Screws

776      ASME B18.6.7M (1999; R 2010) Metric Machine Screws

777      ASME B19.3 (1991; Addenda A 1994; Addenda B 1995) Safety Standard for Compressors for Process Industries

778      ASME B20.1 (2012) Safety Standard for Conveyors and Related Equipment

779      ASME B27.7 (1977; R 2010) General Purpose Tapered and Reduced Cross Section Retaining Rings, Metric

780      ASME B29.100 (2011) Precision Power Transmission, Dbl-P-Power Transmission, Dbl-P-conveyor Roller Chains, Attachments and Sprockets

781      ASME B29.400 (2001; R 2013) Combination, “H” Type Mill Chains, and Sprockets

782      ASME B30.10 (2009) Hooks

783      ASME B30.11 (2010) Monorails and Underhung Cranes – Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings

784      ASME B30.16 (2012) Overhead Hoists (Underhung)

785      ASME B30.17 (2006; R 2012) Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoists)

786      ASME B30.2 (2011) Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

787      ASME B30.22 (2010) Articulating Boom Cranes

788      ASME B30.3 (2012) Tower Cranes

789      ASME B30.5 (2011) Mobile and Locomotive Cranes

790      ASME B30.8 (2010) Floating Cranes and Floating Derricks

791      ASME B31.1 (2012; INT 2-6, 8-10, 13, 15, 17-25, 27-31 and 42-46) Power Piping

792      ASME B31.3 (2012) Process Piping

793      ASME B31.4 (2012) Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquid

794      ASME B31.5 (2013) Refrigeration Piping and Heat Transfer Components

795      ASME B31.8 (2013) Gas Transmission and Distribution Piping Systems

796      ASME B31.9 (2011) Building Services Piping

797      ASME B36.10M (2004; R 2010) Standard for Welded and Seamless Wrought Steel Pipe

798      ASME B36.19M (2004; R 2010) Stainless Steel Pipe

799      ASME B4.1 (1967; R 2009) Preferred Limits and Fits for Cylindrical Parts

800      ASME B40.100 (2013) Pressure Gauges and Gauge Attachments

801      ASME B40.200 (2013) Thermometers, Direct Reading and Remote Reading

802      ASME B46.1 (2009) Surface Texture, Surface Roughness, Waviness and Lay

803      ASME B73.1 (2012) Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process

804      ASME B73.2 (2003; R 2008) Specification for Vertical In-Line Centrifugal Pumps for Chemical Process

805      ASME BPVC (2010) Boiler and Pressure Vessels Code

806      ASME BPVC SEC I (2010) BPVC Section I-Rules for Construction of Power Boilers

807      ASME BPVC SEC II-A (2010) BPVC Section II-Materials-Part A-Ferrous Materials Specifications

808      ASME BPVC SEC II-C (2010) BPVC Section II-Materials Part C-Specifications for Welding Rods Electrodes and Filler Metals

809      ASME BPVC SEC IV (2010) BPVC Section IV-Rules for Construction of Heating Boilers

810      ASME BPVC SEC IX (2010) BPVC Section IX-Welding and Brazing Qualifications

811      ASME BPVC SEC V (2010) BPVC Section V-Nondestructive Examination

812      ASME BPVC SEC VI (2010) BPVC Section VI-Recommended Rules for the Care and Operation of Heating Boilers

813      ASME BPVC SEC VII (2010) BPVC Section VII-Recommended Guidelines for the Care of Power Boilers

814      ASME BPVC SEC VIII (2010) Boiler and Pressure Vessel Codes: Section VIII Rules for Construction of Pressure Vessel

815      ASME BPVC SEC VIII D1 (2010) BPVC Section VIII-Rules for Construction of Pressure Vessels Division 1

816      ASME BPVC SEC VIII D2 (2010) BPVC Section VIII-Rules for Construction of Pressure Vessels Division 2-Alternative Rules

817      ASME CSD-1 (2012) Control and Safety Devices for Automatically Fired Boilers

818      ASME HST-1 (2012) Performance Standard for Electric Chain Hoists

819      ASME HST-2 (1999; R 2010) Performance Standard for Hand Chain Manually Operated Chain Hoists

820      ASME HST-3 (1999; R 2010) Performance Standard for Manually Lever Operated Chain Hoists

821      ASME HST-4 (1999; R 2010) Performance Standard for Overhead Electric Wire Rope Hoists

822      ASME HST-5 (1999; R 2010) Performance Standard for Air Chain Hoists

823      ASME HST-6 (1999; R 2010) Performance Standard for Air Wire Rope Hoists

824      ASME MFC-3M (2004; Addenda A 2007) Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi

825      ASME N509 (2002; R 2008) Nuclear Power Plant Air-Cleaning Units and Components

826      ASME N510 (2007) Testing of Nuclear Air – Treatment Systems

827      ASME NOG-1 (2010) Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder)

828      ASME NQA-1 (2012) Quality Assurance Requirements for Nuclear Facility Applications

829      ASME NUM-1 (2009) Rules for Construction of Cranes, Monorails, and Hoists with Bridge or Trolley or Hoist of the Underhung Type.

830      ASME PTC 10 (1997; R 2009) Performance Test Code on Compressors and Exhausters

831      ASME PTC 12.3 (1997; R 2009) Performance Test Code on Deaerators

832      ASME PTC 19.10 (1981) Flue and Exhaust Gas Analyses

833      ASME PTC 19.11 (2008; R 2013) Steam and Water Sampling, Conditioning, and Analysis in the Power Cycle

834      ASME PTC 19.2 (2010) Pressure Measurement

835      ASME PTC 19.3 TW (2010) Thermowells Performance Test Codes

836      ASME PTC 19.5 (2004; R 2013) Flow Measurement

837      ASME PTC 25 (2008) Pressure Relief Devices

838      ASME PTC 38 (1980; R 1985) Determining the Concentration of Particulate Matter in a Gas Stream

839      ASME PTC 4 (2013) Fired Steam Generators

840      ASME PTC 9 (1970; R 1997) Displacement Compressors, Vacuum Pumps and Blowers (for historical reference only)

841      ASME QEI-1 (2013) Standard for the Qualification of Elevator Inspectors ASPHALT INSTITUTE (AI)

842      ASPHALT INSTITUTE (AI)

843      AI MS-2 (1997 6th Ed) Mix Design Methods

844      AI MS-22 (2001; 2nd Ed) Construction of Hot-Mix Asphalt Pavements

845      AI SP-2 (2001; 3rd Ed) Superpave Mix Design ASPHALT ROOFING MANUFACTURER’S ASSOCIATION (ARMA)

846      ARMA 410BUR88 (2001) Manual of Roof Maintenance and Repair

847      ARMA PMBRG98 (1998) Quality Control Guideline for the Application of Polymer Modified Bitumen Roofing ASSOCIATED AIR BALANCE COUNCIL (AABC)

848      AABC MN-1 (2002; 6th ed) National Standards for Total System Balance

849      AABC MN-4 (1996) Test and Balance Procedures ACG Commissioning Guideli(n2e005) Commissioning Guideline ASSOCIATION FOR IRON AND STEEL TECHNOLOGY (AIST)

850      AIST PB-229 (2008) Stainless Steels: A Steel Products Manual ASSOCIATION FOR THE ADVANCEMENT OF MEDICAL INSTRUMENTATION (AAMI) ANSI/AAMI ST8 (2013) Hospital Steam Sterilizers ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)

851      ASSOCIATION FOR THE ADVANCEMENT OF MEDICAL INSTRUMENTATION (AAMI)

852      ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)

853      AEIC C8 (2000) Extruded Dielectric Shielded Power Cables Rated 5 Through 46 kV

854      AEIC CS1 (2012) Impregnated-Paper-Insulated, Metallic Sheathed Cable, Solid Type

855      AEIC CS8 (2007) specification for Extruded Dielectric Shielded Power Cables Rated 5 Through 46 kV

856      ASSOCIATION OF HOME APPLIANCE MANUFACTURERS (AHAM)

857      AHAM RAC-1 (1982; R2008) Directory of Certified Room Air Conditioners

858      ASSOCIATION OF THE WALL AND CEILING INDUSTRIES – INTERNATIONAL (AWCI)

859      AWCI TM 12-A (1997; 3rd Ed) Standard Practice for the Testing and Inspection of Field Applied Sprayed Fire-Resistive Materials; An Annotated Guide

860      ASTM INTERNATIONAL (ASTM)

861      ASTM 01.01 (2014) Steel – Piping, Tubing, Fittings

862      ASTM A1 (2000; R 2010) Standard Specification for Carbon Steel Tee Rails

863      ASTM A1003/A1003M (2013b) Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

864      ASTM A1008/A1008M (2013) Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardened

865      ASTM A1011/A1011M (2013) Standard Specification for Steel, Sheet, and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability and Ultra-High Strength

866      ASTM A1018/A1018M (2010) Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

867      ASTM A1023/A1023M (2009; E 2012) Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

868      ASTM A1035/A1035M (2013b) Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement

869      ASTM A105/A105M (2013) Standard Specification for Carbon Steel Forgings for Piping Applications

870      ASTM A1055/A1055M (2010; E 2011) Standard Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars

871      ASTM A106/A106M (2013) Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

872      ASTM A1064/A1064M (2013) Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

873      ASTM A108 (2013) Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

874      ASTM A1085 (2013) Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

875      ASTM A109/A109M (2013) Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

876      ASTM A116 (2011) Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

877      ASTM A121 (2013) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

878      ASTM A123/A123M (2013) Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

879      ASTM A126 (2004; R 2009) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

880      ASTM A128/A128M (1993; R 2012) Standard Specification for Steel Castings, Austenitic Manganese

881      ASTM A134 (1996; R 2012) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

882      ASTM A135/A135M (2009) Standard Specification for Electric-Resistance-Welded Steel Pipe

883      ASTM A139/A139M (2004; R 2010) Standard Specification for Electric-Fusion (ARC)-Welded Steel Pipe (NPS 4 and over)

884      ASTM A143/A143M (2007) Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

885      ASTM A148/A148M (2008) Standard Specification for Steel Castings, High Strength, for Structural Purposes

886      ASTM A153/A153M (2009) Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

887      ASTM A159 (1983; R 2011) Standard Specification for Automotive Gray Iron Castings

888      ASTM A167 (1999; R 2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

889      ASTM A176 (1999; R 2009) Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

890      ASTM A179/A179M (1990; R 2012) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

891      ASTM A181/A181M (2013) Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

892      ASTM A182/A182M (2013a) Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

893      ASTM A183 (2003; R 2009) Standard Specification for Carbon Steel Track Bolts and Nuts

894      ASTM A184/A184M (2006; E2011) Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement

895      ASTM A185/A185M (2007) Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

896      ASTM A192/A192M (2002; R 2012) Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service ASTM A193/A193M (2012a) Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service and Other Special Purpose

897      ASTM A193/A193M (2012a) Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service and Other Special Purpose Applications

898      ASTM A194/A194M (2013) Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both

899      ASTM A197/A197M (2000; R 2011) Standard Specification for Cupola Malleable Iron

900      ASTM A20/A20M (2013) General Requirements for Steel Plates for Pressure Vessels

901      ASTM A211 (1975; R 1985) Specification for Spiral-Welded Steel or Iron Pipe

902      ASTM A216/A216M (2012) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

903      ASTM A217/A217M (2012) Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

904      ASTM A220/A220M (1999; R 2009) Standard Specification for Pearlitic Malleable Iron

905      ASTM A227/A227M (2006; R 2011) Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

906      ASTM A229/A229M (2012) Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs

907      ASTM A234/A234M (2013; E 2014) Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

908      ASTM A239 (1995; R 2009; E 2009) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

909      ASTM A240/A240M (2013c) Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

910      ASTM A242/A242M (2013) Standard Specification for High-Strength Low-Alloy Structural Steel

911      ASTM A249/A249M (2010a) Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

912      ASTM A252 (2010) Standard Specification for Welded and Seamless Steel Pipe Piles

913      ASTM A263 (2012) Standard Specification for Stainless Chromium Steel-Clad Plate

914      ASTM A264 (2011) Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

915      ASTM A265 (2012) Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

916      ASTM A266/A266M (2013) Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

917      ASTM A268/A268M (2010) Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

918      ASTM A269 (2013) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

919      ASTM A27/A27M (2013) Standard Specification for Steel Castings, Carbon, for General Application

920      ASTM A270/A270M (2010) Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

921      ASTM A275/A275M (2008; R 2013) Standard Test Method for Magnetic Particle Examination of Steel Forgings

922      ASTM A276 (2013a) Standard Specification for Stainless Steel Bars and Shapes

923      ASTM A278/A278M (2001; R 2011) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 degrees F (350 degrees C)

924      ASTM A283/A283M (2013) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

925      ASTM A285/A285M (2012) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

926      ASTM A29/A29M (2013) Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

927      ASTM A290/A290M (2005; R 2010) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

928      ASTM A297/A297M (2010) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

929      ASTM A302/A302M (2012) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

930      ASTM A307 (2012) Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

931      ASTM A308/A308M (2010) Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot Dip Process

932      ASTM A312/A312M (2013b) Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

933      ASTM A313/A313M (2013) Standard Specification for Stainless Steel Spring Wire

934      ASTM A319 (1971; R 2011) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

935      ASTM A320/A320M (2011a) Standard Specification for Alloy/Steel and Stainless Steel Bolting Materials for Low-Temperature Service

936      ASTM A322 (2013) Standard Specification Steel Bars, Alloy, Standard Grades

937      ASTM A325 (2010; E 2013) Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

938      ASTM A325M (2013) Standard Specification for Structural Bolts, Steel, Heat Treated, 830 MPa Minimum Tensile Strength (Metric)

939      ASTM A328/A328M (2013a) Standard Specification for Steel Sheet Piling

940      ASTM A334/A334M (2004a; R 2010) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

941      ASTM A336/A336M (2010a) Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

942      ASTM A345 (2009) Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

943      ASTM A350/A350M (2013) Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

944      ASTM A351/A351M (2013) Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

945      ASTM A352/A352M (2006; R 2012) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

946      ASTM A354 (2011) Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

947      ASTM A356/A356M (2011) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

948      ASTM A358/A358M (2012) Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

949      ASTM A36/A36M (2012) Standard Specification for Carbon Structural Steel

950      ASTM A366/A366M (1997e1) Standard Specification for Commercial Steel (CS) Sheet, Carbon,(0.15 Maximum Percent) Cold-Rolled

951      ASTM A368 (1995; R 2013) Standard Specification for Stainless Steel Wire Strand

952      ASTM A370 (2012a) Standard Test Methods and Definitions for Mechanical Testing of Steel Products

953      ASTM A376/A376M (2013) Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

954      ASTM A380/A380M (2013) Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

955      ASTM A385/A385M (2011) Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

956      ASTM A392 (2011a) Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

957      ASTM A395/A395M (1999; R 2009) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

958      ASTM A403/A403M (2013a) Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

959      ASTM A416/A416M (2012) Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

960      ASTM A420/A420M (2013) Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

961      ASTM A421/A421M (2010) Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

962      ASTM A423/A423M (2009) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

963      ASTM A424/A424M (2009a) Standard Specification for Steel Sheet for Porcelain Enameling

964      ASTM A428/A428M (2010) Standard Test Method for Weight (Mass) of Coating on Aluminum-Coated Iron or Steel Articles

965      ASTM A435/A435M (1990; R 2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

966      ASTM A436 (1984; R 2011) Standard Specification for Austenitic Gray Iron Castings

967      ASTM A439 (1983; R 2009) Standard Specification for Austenitic Ductile Iron Castings

968      ASTM A447/A447M (2011) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

969      ASTM A449 (2010) Standard Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

970      ASTM A463/A463M (2010) Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

971      ASTM A467/A467M (2007; R 2012) Standard Specification for Machine Coil Chain

972      ASTM A47/A47M (1999; R 2009) Standard Specification for Ferritic Malleable Iron Castings

973      ASTM A475 (2003a; E 2009; R 2009) Standard Specification for Zinc-Coated Steel Wire Strand

974      ASTM A478 (1997; R 2013) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

975      ASTM A479/A479M (2013b) Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

976      ASTM A48/A48M (2003; R 2012) Standard Specification for Gray Iron Castings

977      ASTM A480/A480M (2013b) Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

978      ASTM A484/A484M (2013a) Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

979      ASTM A487/A487M (1993; R 2012) Standard Specification for Steel Castings Suitable for Pressure Service

980      ASTM A489 (2012) Standard Specification for Carbon Steel Lifting Eyes

981      ASTM A49 (2012) Standard Specification for Heat Treated Carbon Steel Joint Bars, Microalloyed Joint Bars and Forged Carbon Steel Compromise Joint Bars

982      ASTM A490 (2012) Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

983      ASTM A490M (2012) Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

984      ASTM A491 (2011) Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

985      ASTM A492 (1995; R 2013) Standard Specification for Stainless Steel Rope Wire

986      ASTM A499 (1989; R 2008) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

987      ASTM A500/A500M (2013) Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

988      ASTM A501 (2007) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

989      ASTM A504/A504M (2008; R 2013) Standard Specification for Wrought Carbon Steel Wheels

990      ASTM A512 (2006) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

991      ASTM A513/A513M (2012) Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

992      ASTM A514/A514M (2013) Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

993      ASTM A515/A515M (2010) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

994      ASTM A516/A516M (2010) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

995      ASTM A518/A518M (1999; R 2012) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

996      ASTM A519 (2006) Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

997      ASTM A524 (1996; R 2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

998      ASTM A529/A529M (2005; R 2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

999      ASTM A53/A53M (2012) Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

1000     ASTM A530/A530M (2012) Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

1001     ASTM A532/A532M (2010) Standard Specification for Abrasion-Resistant Cast Irons

1002     ASTM A534 (2009) Standard Specification for Carburizing Steels for Anti-Friction Bearings

1003     ASTM A536 (1984; R 2009) Standard Specification for Ductile Iron Castings

1004     ASTM A554 (2013) Standard Specification for Welded Stainless Steel Mechanical Tubing

1005     ASTM A560/A560M (2012) Standard Specification for Castings, Chromium-Nickel Alloy

1006     ASTM A563 (2007a) Standard Specification for Carbon and Alloy Steel Nuts

1007     ASTM A563M (2007; R 2013) Standard Specification for Carbon and Alloy Steel Nuts (Metric)

1008     ASTM A564/A564M (2013) Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

1009     ASTM A568/A568M (2013a) Standard Specifications for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

1010     ASTM A572/A572M (2013a) Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

1011     ASTM A574 (2013) Standard Specification for Alloy Steel Socket-Head Cap Screws

1012     ASTM A574M (2012) Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

1013     ASTM A575 (1996; E 2013; R 2013) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

1014     ASTM A576 (1990b; R 2012) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

1015     ASTM A580/A580M (2013b) Standard Specification for Stainless Steel Wire

1016     ASTM A582/A582M (2012; E 2012) Standard Specification for Free-Machining Stainless Steel Bars

1017     ASTM A586 (2004a; E 2009; R 2009) Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand

1018     ASTM A587 (1996; R 2012) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

1019     ASTM A588/A588M (2010) Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point, with Atmospheric Corrosion Resistance

1020     ASTM A6/A6M (2013a) Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

1021     ASTM A603 (1998a; E 2009; R 2009) Standard Specification for Zinc-Coated Steel Structural Wire Rope

1022     ASTM A606/A606M (2009a) Standard Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

1023     ASTM A609/A609M (2012) Standard Specification for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

1024     ASTM A615/A615M (2013) Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

1025     ASTM A618/A618M (2004; R 2010) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

1026     ASTM A627 (2003; R 2011) Standard Specification for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

1027     ASTM A632 (2004; R 2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

1028     ASTM A633/A633M (2013) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

1029     ASTM A641/A641M (2009a) Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

1030     ASTM A648 (2012) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe

1031     ASTM A653/A653M (2013) Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

1032     ASTM A659/A659M (2012) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

1033     ASTM A666 (2010) Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate and Flat Bar

1034     ASTM A667/A667M (1987; R 2012) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

1035     ASTM A668/A668M (2013) Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

1036     ASTM A675/A675M (2003; R 2009) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

1037     ASTM A688/A688M (2012) Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes

1038     Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments ASTM A694/A694M (2013) Standard Specification for Carbon and Alloy

1039     ASTM A694/A694M (2013) Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

1040     ASTM A702 (2013) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought

1041     ASTM A705/A705M (2013) Standard Specification for Age-Hardening Stainless Steel Forgings

1042     ASTM A706/A706M (2013) Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

1043     ASTM A707/A707M (2013) Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

1044     ASTM A709/A709M (2013a) Standard Specification for Structural Steel for Bridges

1045     ASTM A716 (2008) Standard Specification for Ductile Iron Culvert Pipe

1046     ASTM A722/A722M (2012) Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete

1047     ASTM A727/A727M (2011) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

1048     ASTM A733 (2003; E 2009; R 2009) Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

1049     ASTM A74 (2013a) Standard Specification for Cast Iron Soil Pipe and Fittings

1050     ASTM A742/A742M (2013) Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

1051     ASTM A743/A743M (2013a) Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

1052     ASTM A746 (2009) Standard Specification for Ductile Iron Gravity Sewer Pipe

1053     ASTM A755/A755M (2011) Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

1054     ASTM A760/A760M (2013) Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

1055     ASTM A762/A762M (2008) Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

1056     ASTM A764 (2007; R 2012) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

1057     ASTM A767/A767M (2009) Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

1058     ASTM A774/A774M (2013) Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

1059     ASTM A775/A775M (2007b) Standard Specification for Epoxy-Coated Steel Reinforcing Bars

1060     ASTM A778 (2001; E 2009; R 2009) Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

1061     ASTM A779/A779M (2012) Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete

1062     ASTM A780/A780M (2009) Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

1063     ASTM A786/A786M (2005; R 2009) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

1064     ASTM A789/A789M (2013a) Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

1065     ASTM A792/A792M (2010) Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

1066     ASTM A795/A795M (2013) Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

1067     ASTM A798/A798M (2013) Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

1068     ASTM A807/A807M (2013) Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

1069     ASTM A809 (2008; R 2013) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

1070     ASTM A813/A813M (2009) Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

1071     ASTM A814/A814M (2008) Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

1072     ASTM A815/A815M (2013a) Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

1073     ASTM A82/A82M (2007) Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

1074     ASTM A820/A820M (2011) Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

1075     ASTM A821/A821M (2010) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks

1076     ASTM A824 (2001; R 2012) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

1077     ASTM A849 (2010) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

1078     ASTM A853 (2004; R 2010) Standard Specification for Steel Wire, Carbon, for General Use

1079     ASTM A856/A856M (2003; R 2009) Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

1080     ASTM A857/A857M (2007; R 2013) Standard Specification for Steel Sheet Piling, Cold-Formed, Light Gage

1081     ASTM A858/A858M (2013) Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

1082     ASTM A861 (2004; R 2013) Standard Specification for High-Silicon Iron Pipe and Fittings

1083     ASTM A865/A865M (2006; R 2012) Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

1084     ASTM A879/A879M (2012) Standard Specification for Steel Sheet, zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

1085     ASTM A882/A882M (2004a; R 2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

1086     ASTM A884/A884M (2012) Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

1087     ASTM A886/A886M (2012) Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

1088     ASTM A888 (2013a) Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

1089     ASTM A898/A898M (2007; R 2012) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

1090     ASTM A90/A90M (2013) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

1091     ASTM A924/A924M (2013) Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

1092     ASTM A929/A929M (2001; R 2013) Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

1093     ASTM A931 (2008; R 2013) Standard Test Method for Tension Testing of Wire Ropes and Strand

1094     ASTM A934/A934M (2013) Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

1095     ASTM A955/A955M (2012; E 2012) Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

1096     ASTM A961/A961M (2013) Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

1097     ASTM A966/A966M (2008; R 2012) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

1098     ASTM A974 (1997; R 2011) Standard Specification for Welded Wire Fabric Gabion and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

1099     ASTM A975 (2011) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

1100     ASTM A981/A981M (2011) Standard Specification for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors

1101     ASTM A990 (2011) Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

1102     ASTM A992/A992M (2011) Standard Specification for Structural Steel Shapes

1103     ASTM A996/A996M (2009b) Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

1104     ASTM B1 (2013) Standard Specification for Hard-Drawn Copper Wire

1105     ASTM B101 (2012) Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

1106     ASTM B103/B103M (2010) Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

1107     ASTM B108/B108M (2012; E 2012) Standard Specification for Aluminum-Alloy Permanent Mold Castings

1108     Copper-Alloy Seamless Condenser Tubes and Ferrule Stock ASTM B117 (2011) Standard Practice for Operating Salt Spray

1109     ASTM B117 (2011) Standard Practice for Operating Salt Spray (Fog) Apparatus

1110     ASTM B121/B121M (2011) Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

1111     ASTM B124/B124M (2013) Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

1112     ASTM B127 (2005; R 2009) Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

1113     ASTM B135 (2010) Standard Specification for Seamless Brass Tube

1114     ASTM B135M (2010) Standard Specification for Seamless Brass Tube (Metric)

1115     ASTM B136 (1984; R 2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

1116     ASTM B137 (1995; R 2009) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

1117     ASTM B138/B138M (2011) Standard Specification for Manganese Bronze Rod, Bar and Shapes

1118     ASTM B148 (1997; R 2009) Standard Specification for Aluminum-Bronze Sand Castings

1119     ASTM B150/B150M (2012) Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

1120     ASTM B152/B152M (2013) Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

1121     ASTM B161 (2005; R 2009) Standard Specification for Nickel Seamless Pipe and Tube

1122     ASTM B163 (2011; E 2012) Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

1123     ASTM B164 (2003; R 2008) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

1124     ASTM B165 (2005; R 2009) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

1125    ASTM B166 (2011) Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire

1126    ASTM B167 (2011) Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube

1127    ASTM B168 (2011) Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip

1128     ASTM B171/B171M (2012) Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers and Heat Exchangers

1129     ASTM B173 (2010) Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

1130     ASTM B176 (2008; R 2013) Standard Specification for Copper-Alloy Die Castings

1131     ASTM B177/B177M (2011) Standard Guide for Engineering Chromium Electroplating

1132     ASTM B179 (2011; E 2013) Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

1133     ASTM B187/B187M (2011) Standard Specification for Copper, Bus Bar, Rod and Shapes and General Purpose Rod, Bar and Shapes

1134     ASTM B188 (2010) Standard Specification for Seamless Copper Bus Pipe and Tube

1135     ASTM B194 (2008) Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

1136     ASTM B2 (2013) Standard Specification for Medium-Hard-Drawn Copper Wire

1137     ASTM B209 (2010) Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

1138     ASTM B209M (2010) Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

1139     ASTM B21/B21M (2012) Standard Specification for Naval Brass Rod, Bar, and Shapes

1140     ASTM B210 (2012) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

1141     ASTM B210M (2012) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

1142     ASTM B211 (2012) Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

1143    ASTM B211M (2012; E 2012) Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire (Metric)

1144     ASTM B22/B22M (2013; E 2013) Standard Specification for Bronze Castings for Bridges and Turntables

1145     ASTM B221 (2013) Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

1146     ASTM B221M (2013) Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

1147     ASTM B23 (2000; R 2010) Standard Specification for White Metal Bearing Alloys (known Commercially as Babbitt Metal)

1148     ASTM B230/B230M (2007; R 2012) Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes ASTM B231/B231M (2012) Standard Specification for

1149     ASTM B231/B231M (2012) Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

1150     ASTM B232/B232M (2011) Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

1151     ASTM B236 (2007) Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

1152     ASTM B236M (2007) Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)

1153     ASTM B241/B241M (2012; E 2013) Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

1154     ASTM B244 (2009) Standard Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

1155     ASTM B247 (2009) Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

1156     ASTM B247M (2009) Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)

1157     ASTM B251 (2010) General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

1158     ASTM B251M (2010) General Requirements for Wrought Seamless Copper and Copper-Alloy Tube (Metric)

1159     ASTM B26/B26M (2012) Standard Specification for Aluminum-Alloy Sand Castings

1160     ASTM B265 (2013a) Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

1161     ASTM B271/B271M (2011; E 2013) Standard Specification for Copper-Base Alloy Centrifugal Castings

1162     ASTM B280 (2013) Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

1163     ASTM B3 (2013) Standard Specification for Soft or Annealed Copper Wire

1164     ASTM B30 (2012) Standard Specification for Copper Alloys in Ingot Form

1165     ASTM B302 (2012) Standard Specification for Threadless Copper Pipe, Standard Sizes

1166     ASTM B306 (2013) Standard Specification for Copper Drainage Tube (DWV) ASTM B308/B308M (2010) Standard Specification for Aluminum-Alloy

1167     ASTM B308/B308M (2010) Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

1168     ASTM B316/B316M (2010) Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

1169     ASTM B317/B317M (2007) Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor)

1170     ASTM B32 (2008) Standard Specification for Solder Metal

1171     ASTM B33 (2010) Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes

1172     ASTM B333 (2003; R 2008) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

1173     ASTM B339 (2012) Standard Specification for Pig Tin

1174     ASTM B344 (2011) Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

1175     ASTM B345/B345M (2011) Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

1176     ASTM B348 (2013) Standard Specification for Titanium and Titanium Alloy Bars and Billets

1177     ASTM B36/B36M (2013) Standard Specification for Brass Plate, Sheet, Strip, and Rolled Bar

1178     ASTM B361 (2008) Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

1179     ASTM B366 (2010a) Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

1180     ASTM B37 (2008; R 2013) Standard Specification for Aluminum for Use in Iron and Steel Manufacturer

1181     ASTM B370 (2012) Standard Specification for Copper Sheet and Strip for Building Construction

1182     ASTM B371/B371M (2008; R 2013) Standard Specification for Copper-Zinc-Silicon Alloy Rod

1183     ASTM B39 (1979; R 2008) Standard Specification for Nickel

1184     ASTM B395/B395M (2013) Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

1185     ASTM B398/B398M (2002; R 2013) Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes

1186     ASTM B399/B399M (2004; R 2010) Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

1187     ASTM B400/B400M (2008; E 2013) Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductor

1188     ASTM B418 (2012) Standard Specification for Cast and Wrought Galvanic Zinc Anodes

1189     ASTM B42 (2010) Standard Specification for Seamless Copper Pipe, Standard Sizes

1190     ASTM B424 (2011) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet,

1191     ASTM B429/B429M (2010; E 2012) Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

1192     ASTM B43 (2009) Standard Specification for Seamless Red Brass Pipe, Standard Sizes

1193     ASTM B438 (2013) Standard Specification for Sintered Bronze Bearings (Oil Impregnated)

1194     ASTM B439 (2008) Standard Specification for Iron-Base Sintered Bearings (Oil-Impregnated)

1195     ASTM B443 (2000; R 2009) Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625)and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

1196     ASTM B456 (2011; E 2011) Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

1197     ASTM B479 (2006) Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications

1198     ASTM B48 (2000; R 2011) Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

1199     ASTM B496 (2013a) Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

1200     ASTM B505/B505M (2012a) Standard Specification for Copper-Base Alloy Continuous Castings

1201     ASTM B517 (2005; R 2009) Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603,

1202     UNS N06025, and UNS N06045) Pipe

1203     ASTM B545 (2013) Standard Specification for Electrodeposited Coatings of Tin

1204     ASTM B546 (2004; R 2009) Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332),Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

1205     ASTM B564 (2011; E 2013) Standard Specification for Nickel Alloy Forgings

1206     ASTM B574 (2010) Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper,Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod

1207     ASTM B584 (2013) Standard Specification for Copper Alloy Sand Castings for General Applications

1208     ASTM B6 (2013) Standard Specification for Zinc

1209     ASTM B609/B609M (2012) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical purposes

1210     ASTM B61 (2008; R 2013) Standard Specification for Steam or Valve Bronze Castings

1211     ASTM B619 (2010; E 2012) Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

1212     ASTM B62 (2009) Standard Specification for Composition Bronze or Ounce Metal Castings

1213     ASTM B622 (2010) Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

1214     ASTM B632/B632M (2008) Standard Specification for Aluminum-Alloy Rolled Tread Plate

1215     ASTM B633 (2013) Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

1216     ASTM B650 (1995; R 2013) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

1217     ASTM B659 (1990; E 2008; R 2008) Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

1218     ASTM B68/B68M (2011) Standard Specification for Seamless Copper Tube, Bright Annealed (Metric)

1219     ASTM B687 (1999; R 2011) Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

1220     ASTM B69 (2013) Standard Specification for Rolled Zinc

1221     ASTM B695 (2004; R 2009) Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

1222     ASTM B696 (2000; R 2009) Standard Specification for Coatings of Cadmium Mechanically Deposited

1223     ASTM B725 (2005; R 2009) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

1224     ASTM B745/B745M (2012) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

1225     ASTM B749 (2003; R 2009) Standard Specification for Lead and Lead Alloy Strip, Sheet and Plate Products

1226     ASTM B75/B75M (2011) Standard Specification for Seamless Copper Tube

1227     ASTM B763/B763M (2013; E 2013) Standard Specification for Copper Alloy Sand Castings for Valve Application

1228     ASTM B766 (1986; R 2008) Standard Specification for Electrodeposited Coatings of Cadmium

1229     ASTM B775 (2008) General Requirements for Nickel and Nickel Alloy Welded Pipe

1230     ASTM B8 (2011) Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

1231     ASTM B800 (2005; R 2011) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers

1232     ASTM B801 (2007; R 2012) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

1233     ASTM B806 (2008a) Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

1234     ASTM B813 (2010) Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

1235     ASTM B819 (2000; R 2011) Standard Specification for Seamless Copper Tube for Medical Gas Systems

1236     ASTM B823 (2009) Standard Specification for Materials for Nonferrous Powder Metallurgy (P/M)Structural Parts

1237     ASTM B824 (2011) General Requirements for Copper Alloy Castings

1238     ASTM B828 (2002; R 2010) Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

1239     ASTM B829 (2004; R 2009; E 2012) General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

1240     ASTM B837 (2010) Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems

1241     ASTM B843 (2013) Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

1242     ASTM B85/B85M (2013) Standard Specification for Aluminum-Alloy Die Castings

1243     ASTM B86 (2013) Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

1244     ASTM B88 (2009) Standard Specification for Seamless Copper Water Tube

1245     ASTM B88M (2013) Standard Specification for Seamless Copper Water Tube (Metric)

1246     ASTM B929 (2005; R 2011; E 2011) Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

1247     ASTM B98/B98M (2013) Standard Specification for Copper-Silicon Alloy Rod, Bar, and Shapes

1248     ASTM C1002 (2007; R 2013) Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

1249     ASTM C1007 (2011a) Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

1250     ASTM C1012/C1012M (2013) Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

1251     ASTM C1015 (2006; R 2011; R 2011) Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

1252     ASTM C1017/C1017M (2007) Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

1253     ASTM C1019 (2013) Standard Test Method for Sampling and Testing Grout

1254     ASTM C1026 (2013) Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling

1255     ASTM C1027 (2009) Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile

1256     ASTM C1032 (2006; R 2011) Standard Specification for Woven Wire Plaster Base

1257     ASTM C1036 (2010; E 2012) Standard Specification for Flat Glass

1258     ASTM C1040/C1040M (2008; R 2013) Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, by Nuclear Methods

1259     ASTM C1047 (2010a) Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

1260     ASTM C1048 (2012; E 2012) Standard Specification for Heat-Treated Flat Glass – Kind HS, Kind FT Coated and Uncoated Glass

1261     ASTM C1053 (2000; R 2010) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications

1262     ASTM C1059/C1059M (2013) Standard Specification for Latex Agents for Bonding Fresh to Hardened Concrete

1263     ASTM C1063 (2013) Standard Practice for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

1264     ASTM C1064/C1064M (2011) Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

1265     ASTM C1069 (2009) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

1266     ASTM C1071 (2012) Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

1267     ASTM C1072 (2013) Standard Test Method for Measurement of Masonry Flexural Bond Strength

1268     ASTM C1074 (2011) Standard Practice for Estimating Concrete Strength by the Maturity Method

1269     ASTM C1077 (2014) Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation

1270     ASTM C1084 (2010) Standard Specification for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

1271     ASTM C1087 (2000; R 2011) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

1272     ASTM C1088 (2013) Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

1273     ASTM C1089 (2013) Standard Specification for Spun Cast Prestressed Concrete Poles

1274     ASTM C109/C109M (2013) Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or (50-mm) Cube Specimens)

1275     ASTM C11 (2013) Standard Terminology Relating to Gypsum and Related Building Materials and Systems

1276     ASTM C110 (2011) Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

1277     ASTM C1103 (2003; R 2009) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

1278     ASTM C1103M (2003; R 2009) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

1279     ASTM C1107/C1107M (2013) Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

1280     ASTM C1116/C1116M (2010a) Standard Specification for Fiber-Reinforced Concrete

1281     ASTM C1126 (2013a) Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

1282     ASTM C1136 (2012) Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

1283     ASTM C114 (2013) Standard Test Methods for Chemical Analysis of Hydraulic Cement

1284     ASTM C1140/C1140M (2011) Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

1285     ASTM C1141/C1141M (2008) Standard Specification for Admixtures for Shotcrete

1286     ASTM C1142 (1995; R 2013) Standard Specification for Extended Life Mortar for Unit Masonry

1287     ASTM C1147 (2001; R 2012) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

1288     ASTM C115/C115M (2010; E 2013) Standard Test Method for Fineness of Portland Cement by the Turbidimeter

1289     ASTM C1152/C1152M (2004; E 2012; R 2012) Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

1290     ASTM C1153 (2010) Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

1291     ASTM C1157/C1157M (2011) Standard Specification for Hydraulic Cement

1292     ASTM C1167 (2011) Standard Specification for Clay Roof Tiles

1293     ASTM C117 (2013) Standard Test Method for Materials Finer than 75-um (No. 200) Sieve in Mineral Aggregates by Washing

1294     ASTM C1172 (2009; E 2011) Standard Specification for Laminated Architectural Flat Glass

1295     ASTM C1177/C1177M (2013) Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

1296     ASTM C1178/C1178M (2013) Standard Specification for Glass Mat Water-Resistant Gypsum Backing Panel

1297     ASTM C1184 (2013) Standard Specification for Structural Silicone Sealants

1298     ASTM C1186 (2008; R 2012) Standard Specification for Flat Non-Asbestos Fiber Cement Sheets

1299     ASTM C12 (2013a) Standard Practice for Installing Vitrified Clay Pipe Lines

1300     ASTM C1202 (2012) Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration

1301     ASTM C1208/C1208M (2011) Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting and Tunnels

1302     ASTM C1218/C1218M (1999; R 2008) Standard Specification for Water-Soluble Chloride in Mortar and Concrete

1303     ASTM C123 (2011) Standard Test Method for Lightweight Particles in Aggregate

1304     ASTM C123/C123M (2012) Standard Test Method for Lightweight Particles in Aggregate

1305     ASTM C1231/C1231M (2013) Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

1306     ASTM C1240 (2012) Standard Specification for Silica Fume Used in Cementitious Mixtures

1307     ASTM C1244 (2011) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill

1308    ASTM C1244M (2011) Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)

1309     ASTM C125 (2013b) Standard Terminology Relating to Concrete and Concrete Aggregates

1310     ASTM C1252 (2006) Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

1311     ASTM C126 (2013) Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

1312     ASTM C1260 (2007) Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

1313     ASTM C1262 (2010) Standard Test Method for Evaluating the Freeze-Thaw Durability of Manufactured Concrete Masonry Units and Related Concrete Units

1314     ASTM C127 (2012) Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

1315     ASTM C1278/C1278M (2007a; R 2011) Standard Specification for Fiber-Reinforced Gypsum Panel

1316     ASTM C128 (2012) Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

1317     ASTM C1289 (2014) Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

1318     ASTM C129 (2011) Standard Specification for Nonloadbearing Concrete Masonry Units

1319     ASTM C1290 (2011) Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

1320     ASTM C131 (2006) Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

1321     ASTM C1311 (2010) Standard Specification for Solvent Release Agents

1322     ASTM C1315 (2011) Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

1323     ASTM C1324 (2010) Standard Test Method for Examination and Analysis of Hardened Masonry Mortar

1324     ASTM C1325 (2008b) Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Substrate Sheets

1325     ASTM C1330 (2002; R 2013) Standard Specification for Cylindrical Sealant Backing for Use with Cold

1326     ASTM C136 (2006) Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

1327     ASTM C1363 (2011) Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

1328     ASTM C1364 (2010b) Standard Specification for Architectural Cast Stone

1329     ASTM C1372 (2011) Standard Specification for Dry-Cast Segmental Retaining Wall Units

1330     ASTM C138/C138M (2013a) Standard Test Method for Density (“Unit Weight”), Yield, and Air Content (Gravimetric) of Concrete

1331     ASTM C139 (2011) Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes

1332     ASTM C1396/C1396M (2013) Standard Specification for Gypsum Board

1333     ASTM C14 (2011) Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe

1334     ASTM C140/C140M (2013a) Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

1335     ASTM C142/C142M (2010) Standard Test Method for Clay Lumps and Friable Particles in Aggregates

1336     ASTM C143/C143M (2012) Standard Test Method for Slump of Hydraulic-Cement Concrete

1337     ASTM C1433 (2014) Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers

1338     ASTM C1433M (2013) Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric)

1339     ASTM C1435/C1435M (2008) Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

1340     ASTM C1438 (2013) Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar

1341     ASTM C144 (2011) Standard Specification for Aggregate for Masonry Mortar

1342     ASTM C1452 (2000; R 2006) Standard Specification for Reinforced Autoclaved Aerated Concrete Elements

1343     ASTM C1478 (2008; R 2013) Standard Specification for Storm Drain Resilient Connectors Between Reinforced

1344     ASTM C1478M (2008a; R 2013) Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes and Laterals (Metric)

1345     ASTM C1489 (2001; E 2008; R 2008) Standard Specification for Lime Putty for Structural Purposes

1346     ASTM C14M (2011) Standard Specification for Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

1347     ASTM C150/C150M (2012) Standard Specification for Portland Cement

1348     ASTM C151/C151M (2009) Standard Test Method for Autoclave Expansion of Hydraulic Cement

1349     ASTM C1513 (2013) Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

1350     ASTM C1549 (2009) Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

1351     ASTM C155 (1997; R 2013) Standard Specification for Insulating Firebrick

1352     ASTM C1567 (2013) Standard Test Method for Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

1353     ASTM C157/C157M (2008) Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

1354     ASTM C158 (2002; R 2012) Strength of Glass by Flexure (Determination of Modulus of Rupture)

1355     ASTM C1581/C1581M (2009a) Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

1356     ASTM C1585 (2013) Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

1357     ASTM C159 (2006; R 2011) Standard Specification for Vitrified Clay Filter Blocks

1358     ASTM C1602/C1602M (2012) Standard Specification for Mixing Water Used in Production of Hydraulic Cement Concrete

1359     ASTM C1609/C1609M (2012) Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Landing)

1360     ASTM C1610/C1610M (2010) Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

1361     ASTM C1611/C1611M (2009b; E 2010) Standard Test Method for Slump Flow of Self-Consolidating Concrete

1362     ASTM C1621/C1621M (2009b) Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

1363     ASTM C1629/C1629M (2006; R 2011) Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

1364     ASTM C1646/C1646M (2008a) Making and Curing Test Specimens for Evaluating Frost Resistance of Coarse Aggregate in Air-Entrained Concrete by Rapid Freezing and Thawing

1365     ASTM C165 (2007; R 2012) Standard Test Method for Measuring Compressive Properties of Thermal Insulations

1366     ASTM C1660 (2010) Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

1367     ASTM C1688/C1688M (2013) Standard Test Method For Density And Void Content Of Freshly Mixed Pervious Concrete

1368     ASTM C1693 (2011) Standard Specification for Autoclaved Aerated Concrete (AAC)

1369     ASTM C1694 (2009) Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

1370     ASTM C170/C170M (2009) Standard Test Method for Compressive Strength of Dimension Stone

1371     ASTM C171 (2007) Standard Specification for Sheet Materials for Curing Concrete

1372     ASTM C1710 (2011) Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

1373     ASTM C172 (2010) Standard Practice for Sampling Freshly Mixed Concrete

1374     ASTM C172/C172M (2010) Standard Practice for Sampling Freshly Mixed Concrete

1375     ASTM C173/C173M (2012) Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

1376     ASTM C174/C174M (2013) Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

1377     ASTM C177 (2013) Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

1378     ASTM C183 (2013) Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement

1379     ASTM C185 (2008) Standard Test Method for Air Content of Hydraulic Cement Mortar

1380     ASTM C186 (2013) Standard Test Method for Heat of Hydration of Hydraulic Cement

1381     ASTM C188 (2009) Standard Test Method for Density of Hydraulic Cement

1382     ASTM C191 (2013) Standard Test Method for Time of Setting Hydraulic Cement by Vicat Needle

1383     ASTM C192/C192M (2013a) Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

1384     ASTM C195 (2007; R 2013) Standard Specification for Mineral Fiber Thermal Insulating Cement

1385     ASTM C196 (2000; R 2010) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

1386     ASTM C203 (2005; R 2012) Breaking Load and Flexural Properties of Block-Type Thermal Insulation

1387     ASTM C204 (2011) Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus

1388     ASTM C206 (2003; R 2009) Standard Specification for Finishing Hydrated Lime

1389     ASTM C207 (2006; R 2011) Standard Specification for Hydrated Lime for Masonry Purposes

1390     ASTM C208 (2012) Cellulosic Fiber Insulating Board

1391     ASTM C216 (2013) Facing Brick (Solid Masonry Units Made from Clay or Shale)

1392     ASTM C220 (1991; R 2009) Standard Specification for Flat Asbestos-Cement Sheets

1393     ASTM C231/C231M (2010) Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

1394     ASTM C232/C232M (2013c) Standard Test Methods for Bleeding of Concrete

1395     ASTM C233/C233M (2011) Standard Test Method for Air-Entraining Admixtures for Concrete

1396     ASTM C241/C241M (2013) Standard Specification for Abrasion Resistance of Stone Subjected to Foot Traffic

1397     ASTM C25 (2011) Standard Test Method for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

1398     ASTM C260/C260M (2010a) Standard Specification for Air-Entraining Admixtures for Concrete

1399     ASTM C266 (2013) Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

1400     ASTM C267 (2001; R 2012) Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

1401     ASTM C27 (1998; R 2008) Fireclay and High-Alumina Refractory Brick

1402     ASTM C270 (2012a) Standard Specification for Mortar for Unit Masonry

1403     ASTM C272/C272M (2012) Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

1404     ASTM C273/C273M (2011) Shear Properties of Sandwich Core Materials

1405     ASTM C28/C28M (2010) Gypsum Plasters

1406     ASTM C286 (1999; R 2009) Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

1407     ASTM C289 (2007) Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

1408     ASTM C29/C29M (2009) Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

1409     ASTM C294 (2012) Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

1410     ASTM C295/C295M (2012) Petrographic Examination of Aggregates for Concrete

1411     ASTM C297/C297M (2004; R 2010) Flatwise Tensile Strength of Sandwich Constructions

1412     ASTM C301 (2013) Vitrified Clay Pipe

1413     ASTM C307 (2003; R 2012) Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

1414     ASTM C309 (2011) Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

1415     ASTM C31/C31M (2012) Standard Practice for Making and Curing Concrete Test Specimens in the Field

1416     ASTM C311/C311M (2013) Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete

1417     ASTM C315 (2007; R 2011) Clay Flue Linings

1418     ASTM C317/C317M (2000; R 2010) Gypsum Concrete

1419     ASTM C32 (2013) Standard Specification for Sewer and Manhole Brick (Made from Clay or Shale)

1420     ASTM C33/C33M (2013) Standard Specification for Concrete Aggregates

1421     ASTM C330 (2009) Standard Specification for Lightweight Aggregates for Structural Concrete

1422     ASTM C330/C330M (2013) Standard Specification for Lightweight Aggregates for Structural Concrete

1423     ASTM C332 (2009) Lightweight Aggregates for Insulating Concrete

1424     ASTM C338 (1993; R 2013) Standard Test Method Softening Point of Glass

1425     ASTM C34 (2013) Structural Clay Load-Bearing Wall Tile

1426     ASTM C35 (2001; R 2009) Inorganic Aggregates for Use in Gypsum Plaster

1427     ASTM C361 (2014) Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

1428     ASTM C361M (2012) Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

1429     ASTM C373 (1988; R 2006) Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products

1430     ASTM C387/C387M (2011b) Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete

1431     ASTM C39/C39M (2014) Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

1432     ASTM C395 (2001; R 2012) Chemical-Resistant Resin Mortars

1433     ASTM C4 (2004; R 2009) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

1434     ASTM C40 (2011) Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

1435     ASTM C40/C40M (2011) Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

1436     ASTM C401 (2012) Alumina and Alumina-Silicate Castable Refractories

1437     ASTM C403/C403M (2008) Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

1438     ASTM C404 (2011) Standard Specification for Aggregates for Masonry Grout

1439     ASTM C406/C406M (2010) Roofing Slate

1440     ASTM C412 (2011) Concrete Drain Tile

1441     ASTM C412M (2011) Concrete Drain Tile (Metric)

1442     ASTM C413 (2011; R 2012) Absorption of Chemical-Resistant Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

1443     ASTM C42/C42M (2013) Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

1444     ASTM C423 (2009a) Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

1445     ASTM C425 (2004; R 2013) Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

1446     ASTM C430 (2008) Fineness of Hydraulic Cement by the 45-Micrometer (No. 325) Sieve

1447     ASTM C441 (2011) Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

1448     ASTM C443 (2011) Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

1449     ASTM C443M (2012) Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

1450     ASTM C444 (2003; R 2009) Perforated Concrete Pipe

1451     ASTM C444M (2003; R 2009) Perforated Concrete Pipe (Metric)

1452     ASTM C449 (2007; R 2013) Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and

1453     ASTM C450 (2008) Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

1454     ASTM C451 (2013) Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

1455     ASTM C457/C457M (2012) Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

1456     ASTM C469/C469M (2010) Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression

1457     ASTM C472 (1999; R 2009) Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

1458     ASTM C473 (2012) Physical Testing of Gypsum Panel Products

1459     ASTM C475/C475M (2012) Joint Compound and Joint Tape for Finishing Gypsum Board

1460     ASTM C476 (2010) Standard Specification for Grout for Masonry

1461     ASTM C478 (2013) Standard Specification for Precast Reinforced Concrete Manhole Sections

1462     ASTM C478M (2013) Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

1463     ASTM C481 (1999; R 2011) Standard Test Method Laboratory Aging of Sandwich Constructions

1464     ASTM C494/C494M (2013) Standard Specification for Chemical Admixtures for Concrete

1465     ASTM C495 (2007) Compressive Strength of Lightweight Insulating Concrete

1466     ASTM C495/C495M (2012) Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

1467     ASTM C496/C496M (2011) Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

1468     ASTM C497 (2013) Concrete Pipe, Manhole Sections, or Tile

1469     ASTM C497M (2013a) Concrete Pipe, Manhole Sections, or Tile (Metric)

1470     ASTM C50/C50M (2013) Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products

1471     ASTM C501 (1984; R 2009) Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

1472     ASTM C506 (2013a) Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

1473     ASTM C506M (2013) Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

1474     ASTM C507 (2013) Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

1475     ASTM C507M (2013b) Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

1476     ASTM C508/C508M (2000; R 2009; E 2010) Asbestos-Cement Underdrain Pipe

1477     ASTM C509 (2006; R 2011) Elastomeric Cellular Preformed Gasket and Sealing Material

1478     ASTM C514 (2004; E 2009; R 2009) Standard Specification for Nails for the Application of Gypsum Board

1479     ASTM C516 (2008) Vermiculite Loose Fill Thermal Insulation

1480     ASTM C518 (2010) Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

1481     ASTM C531 (2000; R 2012) Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, and Monolithic Surfacings, and Polymer Concretes

1482     ASTM C533 (2013) Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

1483     ASTM C534/C534M (2013) Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

1484     ASTM C535 (2012) Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

1485     ASTM C542 (2005; R 2011) Lock-Strip Gaskets

1486     ASTM C547 (2012) Standard Specification for Mineral Fiber Pipe Insulation

1487     ASTM C549 (2006; R 2012) Perlite Loose Fill Insulation

1488     ASTM C55 (2011) Concrete Brick

1489     ASTM C552 (2013) Standard Specification for Cellular Glass Thermal Insulation

1490     ASTM C553 (2013) Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

1491     ASTM C557 (2003; E 2009; R 2009) Adhesives for Fastening Gypsum Wallboard to Wood Framing

1492     ASTM C564 (2012) Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

1493     ASTM C566 (2013) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

1494     ASTM C567/C567M (2011) Determining Density of Structural Lightweight Concrete

1495     ASTM C578 (2013) Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

1496     ASTM C579 (2001; R 2012) Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic

1497     ASTM C580 (2002; R 2012) Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

1498     ASTM C581 (2003; E 2008; R 2008) Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures, Intended for Liquid Service

1499     ASTM C582 (2009) Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

1500     ASTM C585 (2010) Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

1501     ASTM C587 (2004; R 2009) Gypsum Veneer Plaster

1502     ASTM C59/C59M (2000; R 2011) Gypsum Casting Plaster and Gypsum Molding Plaster

1503     ASTM C591 (2013) Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

1504     ASTM C592 (2013) Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

1505     ASTM C593 (2006; R 2011) Fly Ash and Other Pozzolans for Use with Lime for Soil Stabilization

1506     ASTM C595/C595M (2013) Standard Specification for Blended Hydraulic Cements

1507     ASTM C596 (2009) Drying Shrinkage of Mortar Containing Hydraulic Cement

1508     ASTM C597 (2009) Pulse Velocity Through Concrete

1509     ASTM C600 (1985; R 2010) Thermal Shock Test on Glass Pipe

1510     ASTM C602 (2013a) Agricultural Liming Materials

1511     ASTM C603 (2004; R 2008) Extrusion Rate and Application Life of Elastomeric Sealants

1512     ASTM C61/C61M (2000; R 2011) Gypsum Keene’s Cement

1513     ASTM C610 (2011) Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

1514     ASTM C612 (2014) Mineral Fiber Block and Board Thermal Insulation

1515     ASTM C618 (2012a) Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

1516     ASTM C62 (2013a) Building Brick (Solid Masonry Units Made from Clay or Shale)

1517     ASTM C631 (2009) Bonding Compounds for Interior Gypsum Plastering

1518     ASTM C635/C635M (2013a) Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and

1519     ASTM C636/C636M (2013) Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

1520     ASTM C639 (2001; R 2011) Rheological (Flow) Properties of Elastomeric Sealants

1521     ASTM C641 (2009) Staining Materials in Lightweight Concrete Aggregates

1522     ASTM C642 (2013) Density, Absorption, and Voids in Hardened Concrete

1523     ASTM C645 (2013) Nonstructural Steel Framing Members

1524     ASTM C647 (2008; R 2013) Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

1525     ASTM C648 (2004; R 2009) Breaking Strength of Ceramic Tile

1526     ASTM C652 (2013) Hollow Brick (Hollow Masonry Units Made from Clay or Shale)

1527     ASTM C654 (2011) Porous Concrete Pipe

1528     ASTM C654M (2011) Porous Concrete Pipe (Metric)

1529     ASTM C655 (2014) Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

1530     ASTM C658 (1998; R 2012) Chemical-Resistant Resin Grouts for Brick or Tile

1531     ASTM C661 (2006; R 2011) Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

1532     ASTM C665 (2012) Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

1533     ASTM C666/C666M (2003; R 2008) Resistance of Concrete to Rapid Freezing and Thawing

1534     ASTM C67 (2013a) Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

1535     ASTM C672/C672M (2012) Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

1536     ASTM C679 (2003; E 2009; R 2009) Tack-Free Time of Elastomeric Sealants

1537     ASTM C684 (1999; R 2003) Making, Accelerated Curing, and Testing Concrete Compression Test Specimens

1538     ASTM C685/C685M (2011) Concrete Made by Volumetric Batching and Continuous Mixing

1539     ASTM C70 (2013) Standard Test Method for Surface Moisture in Fine Aggregate

1540     ASTM C700 (2013) Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

1541     ASTM C702/C702M (2011) Reducing Samples of Aggregate to Testing Size

1542     ASTM C719 (2013) Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

1543     ASTM C722 (2004; R 2012) Standard Specification for Chemical-Resistant Resin Monolithic Surfacings

1544     ASTM C726 (2012) Mineral Fiber Roof Insulation Board

1545     ASTM C728 (2013) Perlite Thermal Insulation Board

1546     ASTM C73 (2010) Calcium Silicate Brick (Sand-Lime Brick)

1547     ASTM C732 (2006; R 2012) Aging Effects of Artificial Weathering on Latex Sealants

1548     ASTM C734 (2006; R 2012) Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

1549     ASTM C739 (2011) Cellulosic Fiber Loose-Fill Thermal Insulation

1550     ASTM C744 (2011) Prefaced Concrete and Calcium Silicate Masonry Units

1551     ASTM C754 (2011) Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

1552     ASTM C76 (2014) Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

1553     ASTM C764 (2011) Mineral Fiber Loose-Fill Thermal Insulation

1554     ASTM C76M (2013a) Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

1555     ASTM C779/C779M (2012) Abrasion Resistance of Horizontal Concrete Surfaces

1556     ASTM C78/C78M (2012; E 2013) Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

1557     ASTM C780 (2012a) Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

1558     ASTM C792 (2004; R 2008) Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

1559     ASTM C793 (2005; R 2010) Effects of Accelerated Weathering on Elastomeric Joint Sealants

1560     ASTM C795 (2008; R 2013) Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

1561     ASTM C796 (2004) Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

1562     ASTM C796/C796M (2012) Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

1563     ASTM C803/C803M (2003; R 2010) Penetration Resistance of Hardened Concrete

1564     ASTM C805/C805M (2013a) Rebound Number of Hardened Concrete

1565     ASTM C823/C823M (2012) Examination and Sampling of Hardened Concrete in Construction

1566     ASTM C827/C827M (2010) Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures

1567     ASTM C828 (2011) Low-Pressure Air Test of Vitrified Clay Pipe Lines

1568     ASTM C834 (2010) Latex Sealants

1569     ASTM C836/C836M (2012) High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use With Separate Wearing Course

1570     ASTM C840 (2013) Application and Finishing of Gypsum Board

1571     ASTM C841 (2003; R 2013) Installation of Interior Lathing and Furring

1572     ASTM C842 (2005; E 2010; R 2010) Application of Interior Gypsum Plaster

1573     ASTM C843 (1999; R 2012) Application of Gypsum Veneer Plaster

1574     ASTM C844 (2004; R 2010) Application of Gypsum Base to Receive Gypsum Veneer Plaster

1575     ASTM C847 (2012) Standard Specification for Metal Lath

1576     ASTM C856 (2013) Petrographic Examination of Hardened Concrete

1577     ASTM C857 (2013) Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

1578     ASTM C864 (2005; R 2011) Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

1579     ASTM C869/C869M (2011) Foaming Agents Used in Making Preformed Foam for Cellular Concrete

1580     ASTM C87/C87M (2010) Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

1581     ASTM C877 (2008) External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

1582     ASTM C877M (2002; R 2009) External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

1583     ASTM C88 (2013) Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

1584     ASTM C881/C881M (2013) Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

1585     ASTM C882/C882M (2013a) Bond Strength of Epoxy-Resin Systems Used with Concrete by Slant Shear

1586     ASTM C884/C884M (1998; R 2010) Thermal Compatibility between Concrete and Epoxy-Resin Overlay

1587     ASTM C891 (2011) Installation of Underground Precast Concrete Utility Structures

1588     ASTM C897 (2005; R 2009) Aggregate for Job-Mixed Portland Cement-Based Plasters

1589     ASTM C90 (2014) Loadbearing Concrete Masonry Units

1590     ASTM C91/C91M (2012) Standard Specification for Masonry Cement

1591     ASTM C916 (1985; R 2007) Standard Specification for Adhesives for Duct Thermal Insulation

1592     ASTM C919 (2012) Use of Sealants in Acoustical Applications

1593     ASTM C920 (2011) Standard Specification for Elastomeric Joint Sealants

1594     ASTM C921 (2010) Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

1595     ASTM C923 (2008; R 2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals

1596     ASTM C923M (2008b; R 2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals (Metric)

1597     ASTM C924 (2002; R 2009) Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method

1598     ASTM C924M (2002; R 2009) Testing Concrete Pipe Sewer Liner by Low-Pressure Air Test Method (Metric)

1599     ASTM C926 (2013a) Application of Portland Cement-Based Plaster

1600     ASTM C928/C928M (2013) Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

1601     ASTM C930 (2012) Potential Health and Safety Concerns Associated with Thermal Insulation Materials and Accessories

1602     ASTM C933 (2013) Welded Wire Lath

1603     ASTM C936/C936M (2013) Standard Specification for Solid Concrete Interlocking Paving Units

1604     ASTM C937 (2010) Grout Fluidifier for Preplaced-Aggregate Concrete

1605     ASTM C938 (2010) Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

1606     ASTM C939 (2010) Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

1607     ASTM C94/C94M (2014) Standard Specification for Ready-Mixed Concrete

1608     ASTM C940 (2010a) Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

1609     ASTM C942 (2010) Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

1610     ASTM C943 (2010) Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

1611     ASTM C944/C944M (2012) Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

1612     ASTM C953 (2010) Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

1613     ASTM C954 (2011) Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

1614     ASTM C955 (2011c) Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

1615     ASTM C969 (2002; R 2009) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

1616     ASTM C969M (2002; R 2009) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

1617     ASTM C97/C97M (2009) Absorption and Bulk Specific Gravity of Dimension Stone

1618     ASTM C972 (2000; R 2011) Compression-Recovery of Tape Sealant

1619     ASTM C977 (2010) Quicklime and Hydrated Lime for Soil Stabilization

1620     ASTM C979/C979M (2010) Pigments for Integrally Colored Concrete

1621     ASTM C989/C989M (2013) Standard Specification for Slag Cement for Use in Concrete and Mortars

1622     ASTM C990 (2009) Standard Specification for Joints for Concrete Pipe, Manholes and Precast Box Sections Using Preformed Flexible Joint Sealants

1623     ASTM C990M (2009) Standard Specification for Joints for Concrete Pipe, Manholes and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

1624     ASTM C991 (2008; E 2008) Flexible Glass Fiber Insulation for Metal Buildings

1625     ASTM D1002 (2010) Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

1626     ASTM D1003 (2013) Haze and Luminous Transmittance of Transparent Plastics

1627     ASTM D1004 (2013) Initial Tear Resistance of Plastic Film and Sheeting

1628     ASTM D1037 (2012) Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

1629     ASTM D1044 (2013) Resistance of Transparent Plastics to Surface Abrasion

1630     ASTM D1045 (2008) Sampling and Testing Plasticizers Used in Plastics

1631     ASTM D1047 (2011) Poly(Vinyl Chloride) Jacket for Wire and Cable

1632     ASTM D1052 (2009) Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus

1633     ASTM D1054 (2002; R 2007) Rubber Property – Resilience Using a Rebound Pendulum

1634     ASTM D1056 (2007) Standard Specification for Flexible Cellular Materials – Sponge or Expanded Rubber

1635     ASTM D1066 (2011) Sampling Steam

1636     ASTM D1073 (2011) Fine Aggregate for Bituminous Paving Mixtures

1637     ASTM D1139/D1139M (2009) Aggregate for Single or Multiple Bituminous Surface Treatments

1638     ASTM D1140 (2000; R 2006) Amount of Material in Soils Finer than the No. 200 (75-micrometer) Sieve

1639     ASTM D1143/D1143M (2007; R 2013) Piles Under Static Axial Compressive Load

1640     ASTM D1148 (2013) Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces

1641     ASTM D1149 (2007; R 2012) Standard Test Method for Rubber Deterioration – Surface Ozone Cracking in a Chamber

1642     ASTM D1152 (2006; R 2012) Methanol (Methyl Alcohol)

1643     ASTM D1153 (2012) Methyl Isobutyl Ketone

1644     ASTM D117 (2010) Standard Guide for Sampling, Test Methods, Specifications and Guide for Electrical Insulating Oils of Petroleum Origin

1645     ASTM D1171 (1999; R 2007) Rubber Deterioration – Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

1646     ASTM D1177 (2012) Freezing Point of Aqueous Engine Coolants

1647     ASTM D1179 (2010) Fluoride Ion in Water

1648     ASTM D1187/D1187M (1997; E 2011; R 2011) Asphalt-Base Emulsions for Use as Protective Coatings for Metal

1649     ASTM D1188 (2007; E 2010) Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens

1650     ASTM D1200 (2010) Viscosity by Ford Viscosity Cup ASTM D1203 (2010) Volatile Loss from Plastics Using Activated

1651     ASTM D1203 (2010) Volatile Loss from Plastics Using Activated Carbon Methods

1652     ASTM D1204 (2008) Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

1653     ASTM D1210 (2005; R 2010) Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

1654     ASTM D1220 (1965; R 1990) Measurement and Calibration of Upright Cylindrical Tanks

1655     ASTM D1227 (2013) Emulsified Asphalt Used as a Protective Coating for Roofing

1656     ASTM D123 (2013a) Terminology Relating to Textiles

1657     ASTM D1238 (2013) Melt Flow Rates of Thermoplastics by Extrusion Plastometer

1658     ASTM D1241 (2007) Materials for Soil-Aggregate Subbase, Base, and Surface Courses

1659     ASTM D1248 (2012) Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

1660     ASTM D1250 (2008) Standard Guide for Use of the Petroleum Measurement Tables

1661     ASTM D13 (2002) Standard Specification for Spirits of Turpentine

1662     ASTM D130 (2012) Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

1663     ASTM D1308 (2013) Effect of Household Chemicals on Clear and Pigmented Organic Finishes

1664     ASTM D1310 (2001; R 2007) Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

1665     ASTM D1327/D1327M (2004e1; R 2012) Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

1666     ASTM D1330 (2004; R 2010) Rubber Sheet Gaskets

1667     ASTM D1335 (2012) Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

1668     ASTM D1384 (2005; R 2012) Corrosion Test for Engine Coolants in Glassware

1669     ASTM D140/D140M (2009) Standard Practice for Sampling Bituminous Materials

1670     ASTM D1401 (2012) Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

1671     ASTM D1418 (2010a) Rubber and Rubber Lattices – Nomenclature

1672     ASTM D1429 (2013) Specific Gravity of Water and Brine

1673     ASTM D1435 (2013) Standard Practice for Outdoor Weathering of Plastics

1674     ASTM D1452 (2009) Soil Investigation and Sampling by Auger Borings

1675     ASTM D146/D146M (2004; E 2012; R 2012) Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

1676     ASTM D1461 (2011) Moisture or Volatile Distillates in Bituminous Paving Mixtures

1677     ASTM D1474 (2008) Standard Test Method for Indentation Hardness of Organic Coatings

1678     ASTM D1475 (2013) Standard Test Method for Density of Liquid Coatings, Inks, and Related Products

1679     ASTM D149 (2009; R 2013) Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

1680     ASTM D1499 (2013) Filtered Open-Flame Carbon-Arc Type Exposures of Plastics

1681     ASTM D1505 (2010) Density of Plastics by the Density-Gradient Technique

1682     ASTM D1525 (2009) Vicat Softening Temperature of Plastics

1683     ASTM D1527 (1999; R 2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

1684     ASTM D153 (1984; R 2008) Specific Gravity of Pigments

1685     ASTM D1533 (2012) Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

1686     ASTM D1535 (2013) Specifying Color by the Munsell System

1687     ASTM D1544 (2004; R 2010) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)

1688     ASTM D1556 (2007) Density and Unit Weight of Soil in Place by the Sand-Cone Method

1689     ASTM D1557 (2012) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3) (2700 kN-m/m3)

1690     ASTM D1559 (1989) Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

1691     ASTM D1560 (2009a) Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

1692     ASTM D1586 (2011) Penetration Test and Split-Barrel Sampling of Soils

1693     ASTM D1587 (2008; E 2012; R 2012) Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

1694     ASTM D1593 (2009) Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

1695     ASTM D1598 (2002; R 2009) Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

1696     ASTM D1599 (1999; R 2011) Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings

1697     ASTM D1603 (2012) Carbon Black Content in Olefin Plastics

1698     ASTM D1621 (2010) Compressive Properties of Rigid Cellular Plastics

1699     ASTM D1622 (2008) Apparent Density of Rigid Cellular Plastics

1700     ASTM D1623 (2009) Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

1701     ASTM D1625 (1971; R 2000) Standard Specifications for Chromated Copper Arsenate

1702     ASTM D1630 (2006; R 2012) Rubber Property – Abrasion Resistance (Footware Abrader)

1703     ASTM D1632 (2007) Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

1704     ASTM D1633 (2000; R 2007) Compressive Strength of Molded Soil-Cement Cylinders

1705     ASTM D1640 (2003; R 2009) Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

1706     ASTM D1652 (2011; E 2012) Standard Test Method for Epoxy Content of Epoxy Resins

1707     ASTM D1653 (2013) Water Vapor Transmission of Organic Coating Films

1708     ASTM D1654 (2008) Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

1709     ASTM D1667 (2005; R 2011) Flexible Cellular Materials – Poly (Vinyl Chloride) Foam (Closed-Cell)

1710     ASTM D1668 (1997a; R 2006) Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

1711     ASTM D1682 (1964; R 1975e1) Test for Breaking Load and Elongation of Textile Fabrics

1712     ASTM D1693 (2013) Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

1713     ASTM D1710 (2008) Extruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and Heavy-Walled Tubing

1714     ASTM D173/D173M (2003; R 2011; E 2012) Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

1715     ASTM D1730 (2009) Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

1716     ASTM D1751 (2004; E 2013; R 2013) Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

1717     ASTM D1752 (2004a; R 2013) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion

1718     ASTM D1763 (2000; R 2013) Epoxy Resins

1719     ASTM D1777 (1996; E 2011; R 2011) Thickness of Textile Materials

1720     ASTM D1784 (2011) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

1721     ASTM D1785 (2012) Standard Specification for Poly(Vinyl Chloride) (PVC), Plastic Pipe, Schedules 40, 80, and 120

1722     ASTM D1790 (2008) Brittleness Temperature of Plastic Sheeting by Impact

1723     ASTM D1856 (2009) Recovery of Asphalt from Solution by Abson Method

1724     ASTM D1863/D1863M (2005; R 2011; E 2012) Mineral Aggregate Used on Built-Up Roofs

1725     ASTM D1864/D1864M (1989; E 2009; R 2009) Moisture in Mineral Aggregate Used on Built-Up Roofs

1726     ASTM D1876 (2008) Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

1727     ASTM D1883 (2007; E 2009; E 2009) CBR (California Bearing Ratio) of Laboratory-Compacted Soils

1728     ASTM D1894 (2011; E 2011) Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

1729     ASTM D1922 (2009) Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

1730     ASTM D1927 (1981; R 1988) Rigid Poly(Vinyl Chloride) Plastic Sheet

1731     ASTM D1929 (2013a) Standard Test Method for Determining Ignition Temperature of Plastics

1732     ASTM D1970/D1970M (2013a) Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

1733     ASTM D1972 (1997; R 2005) Standard Practice for Generic Marking of Plastic Products

1734     ASTM D198 (2013) Standard Test Methods of Static Tests of Lumber in Structural Sizes

1735     ASTM D1998 (2013) Polyethylene Upright Storage Tanks

1736     ASTM D2000 (2012) Standard Classification System for Rubber Products in Automotive Applications

1737     ASTM D202 (2008) Sampling and Testing Untreated Paper Used for Electrical Insulation

1738     ASTM D2026/D2026M (1997; E 2010; R 2010) Cutback Asphalt (Slow-Curing Type)

1739     ASTM D2027/D2027M (2013) Cutback Asphalt (Medium-Curing Type)

1740     ASTM D2028/D2028M (2010) Cutback Asphalt (Rapid-Curing Type)

1741     ASTM D2035 (2013) Standard Practice for Coagulation-Flocculation Jar Test of Water

1742     ASTM D2041/D2041M (2011) Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

1743     ASTM D2047 (2011) Static Coefficient of Friction of Polish-Coated Floor Surfaces as Measured by the James Machine

1744     ASTM D2103 (2010) Standard Specification for Polyethylene Film and Sheeting

1745     ASTM D2104 (2003) Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40

1746     ASTM D2113 (2008) Rock Core Drilling and Sampling of Rock for Site Investigation

1747     ASTM D2122 (1998; R 2010) Determining Dimensions of Thermoplastic Pipe and Fittings

1748     ASTM D2126 (2009) Response of Rigid Cellular Plastics to Thermal and Humid Aging

1749     ASTM D2136 (2002; R 2012) Coated Fabrics – Low-Temperature Bend Test

1750     ASTM D2167 (2008) Density and Unit Weight of Soil in Place by the Rubber Balloon Method

1751     ASTM D217 (2010) Cone Penetration of Lubricating Grease

1752     ASTM D2170/D2170M (2010) Kinematic Viscosity of Asphalts (Bitumens)

1753     ASTM D2171/D2171M (2010) Viscosity of Asphalts by Vacuum Capillary Viscometer

1754     ASTM D2172/D2172M (2011) Quantitative Extraction of Bitumen from Bituminous Paving Mixtures

1755     ASTM D2176 (1997a; R 2007) Folding Endurance of Paper by the

1756     M.I.T. Tester

1757     ASTM D2178/D2178M (2013a) Asphalt Glass Felt Used in Roofing and Waterproofing

1758     ASTM D2186 (2005; R 2009) Deposit-Forming Impurities in Steam

1759     ASTM D2216 (2010) Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

1760     ASTM D2217 (1985; R 1998) Wet Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants

1761     ASTM D2235 (2004; R 2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

1762     ASTM D2239 (2012) Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

1763     ASTM D2240 (2005; R 2010) Standard Test Method for Rubber Property – Durometer Hardness

1764     ASTM D2241 (2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

1765     ASTM D2244 (2011) Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

1766     ASTM D2247 (2011) Testing Water Resistance of Coatings in 100% Relative Humidity

1767     ASTM D226/D226M (2009) Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

1768     ASTM D2261 (2013) Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant Rate-of-Extension Tensile Testing Machine)

1769     ASTM D227/D227M (2003; R 2011; E 2012) Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

1770     ASTM D2270 (2010; E 2011) Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100°C

1771     ASTM D2272 (2011) Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

1772     ASTM D2287 (2012) Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

1773     ASTM D229 (2013) Rigid Sheet and Plate Materials Used for Electrical Insulation

1774     ASTM D2308 (2007; R 2013) Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable

1775     ASTM D2310 (2006; R 2012) Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

1776     ASTM D2321 (2011) Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

1777     ASTM D2344/D2344M (2013) Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

1778     ASTM D235 (2002; R 2012) Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

1779     ASTM D2369 (2010; E 2011) Volatile Content of Coatings ASTM D2370 (1998; R 2010) Tensile Properties of Organic

1780     ASTM D2370 (1998; R 2010) Tensile Properties of Organic Coatings

1781     ASTM D2394 (2005; R 2011) Simulated Service Testing of Wood and Wood-Base Finish Flooring

1782     ASTM D2397/D2397M (2013) Standard Specification for Cationic Emulsified Asphalt

1783     ASTM D2412 (2011) Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

1784     ASTM D2419 (2009) Sand Equivalent Value of Soils and Fine Aggregate

1785     ASTM D242/D242M (2009) Mineral Filler for Bituminous Paving Mixtures ASTM D2434 (1968; R 2006) Permeability of Granular Soils

1786     ASTM D2434 (1968; R 2006) Permeability of Granular Soils (Constant Head)

1787     ASTM D244 (2009) Emulsified Asphalts ASTM D2447 (2003) Standard Specification for Polyethylene (PE)

1788     ASTM D2447 (2003) Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter

1789     ASTM D2452 (2003; R 2009) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

1790     ASTM D2453 (2003; R 2009) Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

1791     ASTM D2454 (2008) Determining the Effect of Overbaking on Organic Coatings

1792     ASTM D2464 (2013) Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

1793     ASTM D2466 (2013) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

1794     ASTM D2467 (2013a) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

1795     ASTM D2471 (1999) Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins

1796     ASTM D2472 (2000; R 2006) Standard Specification for Sulphur Hexafluoride

1797     ASTM D2487 (2011) Soils for Engineering Purposes (Unified Soil Classification System)

1798     ASTM D2488 (2009a) Description and Identification of Soils (Visual-Manual Procedure)

1799     ASTM D2489/D2489M (2008) Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures

1800     ASTM D2495 (2007; R 2012) Standard Test Method for Moisture in Cotton by Oven-Drying

1801     ASTM D25 (2012) Round Timber Piles ASTM D2513 (2013) Thermoplastic Gas Pressure Pipe, Tubing, and

1802     ASTM D2513 (2013) Thermoplastic Gas Pressure Pipe, Tubing, and Fittings

1803     ASTM D2517 (2006; R 2011) Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

1804     ASTM D2523 (2013) Standard Practice for Testing Load-Strain Properties of Roofing Membranes

1805     ASTM D2559 (2012a) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

1806     ASTM D256 (2010) Determining the Izod Pendulum Impact Resistance of Plastics

1807     ASTM D2563 (2008) Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

1808     ASTM D2564 (2012) Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

1809     ASTM D2565 (1999; R 2008) Xenon Arc Exposure of Plastics Intended for Outdoor Applications

1810     ASTM D257 (2007) Standard Test Methods for D-C Resistance or Conductance of Insulating Materials

1811     ASTM D2583 (2013a) Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

1812     ASTM D2609 (2002; R 2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

1813     ASTM D2621 (1987; R 2011) Infrared Identification of Vehicle Solids from Solvent-Reducible Paints

1814     ASTM D2628 (1991; R 2011) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

1815     ASTM D2632 (2001; R 2014) Rubber Property-Resilience by Vertical Rebound

1816     ASTM D2652 (2011) Activated Carbon ASTM D2657 (2007) Heat Fusion Joining Polyolefin Pipe and

1817     ASTM D2657 (2007) Heat Fusion Joining Polyolefin Pipe and Fittings

1818     ASTM D2661 (2011) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40, Plastic Drain, Waste, and Vent Pipe and Fittings

1819     ASTM D2665 (2012) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

1820     ASTM D2672 (1996a; R 2009) Joints for IPS PVC Pipe Using Solvent Cement

1821     ASTM D2680 (2001; R 2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

1822     ASTM D2683 (2010; E 2013) Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

1823     ASTM D2688 (2011) Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)

1824     ASTM D2697 (2003; R 2008) Volume Nonvolatile Matter in Clear or Pigmented Coatings

1825     ASTM D2726/D2726M (2013) Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

1826     ASTM D2729 (2011) Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

1827     ASTM D2737 (2012a) Polyethylene (PE) Plastic Tubing

1828     ASTM D2751 (2005) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings

1829     ASTM D2765 (2011) Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

1830     ASTM D2774 (2012) Underground Installation of Thermoplastic Pressure Piping

1831     ASTM D2794 (1993; R 2010) Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

1832     ASTM D281 (2012) Oil Absorption of Pigments by Spatula Rub-Out

1833     ASTM D2822/D2822M (2005; E 2011; R 2011) Asphalt Roof Cement

1834     ASTM D2824/D2824M (2013) Aluminum-Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, and Fibered without Asbestos

1835     ASTM D2835 (1989; R 2012) Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

1836     ASTM D2837 (2013) Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

1837     ASTM D2842 (2012) Water Absorption of Rigid Cellular Plastics ASTM D2843 (2010) Density of Smoke from the Burning or

1838     ASTM D2843 (2010) Density of Smoke from the Burning or Decomposition of Plastics

1839     ASTM D2844/D2844M (2013) Resistance R-Value and Expansion Pressure of Compacted Soils

1840     ASTM D2846/D2846M (2009; E 2011) Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

1841     ASTM D2854 (2009) Apparent Density of Activated Carbon

1842     ASTM D2855 (1996; R 2010) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

1843     ASTM D2856 (1994; R 1998) Open-Cell Content of Rigid Cellular Plastics by the Air Pycnometer

1844     ASTM D2859 (2006; R 2011) Ignition Characteristics of Finished Textile Floor Covering Materials

1845     ASTM D2862 (2010) Particle Size Distribution of Granular Activated Carbon

1846     ASTM D2863 (2013) Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

1847     ASTM D2866 (2011) Total Ash Content of Activated Carbon

1848     ASTM D2867 (2009) Moisture in Activated Carbon

1849     ASTM D2898 (2010) Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

1850     ASTM D2917 (2007; R 2013) Methyl Isoamyl Ketone

1851     ASTM D2937 (2010) Density of Soil in Place by the Drive-Cylinder Method

1852     ASTM D2939 (2003) Emulsified Bitumens Used as Protective Coatings

1853     ASTM D2940/D2940M (2009) Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports

1854     ASTM D2950/D2950M (2011) Density of Bituminous Concrete in Place by Nuclear Methods

1855     ASTM D297 (2013) Rubber Products – Chemical Analysis

1856     ASTM D2974 (2013) Moisture, Ash, and Organic Matter of Peat and Other Organic Soils

1857     ASTM D2990 (2009) Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

1858     ASTM D2992 (2012) Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

1859     ASTM D2995 (1999; R 2009) Determining Application Rate of Bituminous Distributors

1860     ASTM D2996 (2001; E 2007; R 2007) Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

1861     ASTM D2997 (2001; E 2007; R 2007) Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

1862     ASTM D3018/D3018M (2011) Standard Specification for Class A Asphalt Shingles Surfaced With Mineral Granules

1863     ASTM D3019 (2008) Lap Cement Used with Asphalt Roll Roofing Non Fibered, Asbestos Fibered, and Non Asbestos Fibered

1864     ASTM D3020 (1989) Polyethylene and Ethylene Copolymer Plastic Sheeting for Pond, Canal, and Reservoir Lining

1865     ASTM D3034 (2008) Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

1866     ASTM D3035 (2012; E 2012; E 2013) Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

1867     ASTM D3039/D3039M (2008) Tensile Properties of Polymer Matrix Composite Materials

1868     ASTM D3045 (1992; R 2010) Practice for Heat Aging of Plastics Without Load

1869     ASTM D3083 (1989) Flexible Poly(Vinyl Chloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining

1870     ASTM D312 (2000; R 2006) Standard Specification for Asphalt Used in Roofing

1871     ASTM D3122 (1995; R 2009) Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

1872     ASTM D3138 (2004; R 2011) Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

1873     ASTM D3139 (1998; R 2011) Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

1874     ASTM D3161/D3161M (2013) Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)

1875     ASTM D3171 (2011) Standard Test Method for Constituent Content of Composite Materials

1876     ASTM D3203/D3203M (2011) Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

1877     ASTM D3212 (2007; R 2013) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

1878     ASTM D3222 (2005; R 2010) Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

1879     ASTM D323 (2008) Vapor Pressure of Petroleum Products (Reid Method)

1880     ASTM D3261 (2012; E 2014) Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

1881     ASTM D3262 (2011) “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

1882     ASTM D3273 (2012) Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

1883     ASTM D3274 (2009; R 2013) Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation

1884     ASTM D3276 (2007) Painting Inspectors (Metal Substrates) ASTM D3278 (1996; R 2011) Flash Point of Liquids by Small

1885     ASTM D3278 (1996; R 2011) Flash Point of Liquids by Small Scale Closed-Cup Apparatus

1886     ASTM D3299 (2010) Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

1887     ASTM D3307 (2010) Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

1888     ASTM D3308 (2012) PTFE Resin Skived Tape ASTM D3311 (2011) Drain, Waste, and Vent (DWV) Plastic

1889     ASTM D3311 (2011) Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

1890     ASTM D333 (2001; R 2013) Standard Guide for Clear and Pigmented Lacquers

1891     ASTM D3330/D3330M (2004; R 2010) Peel Adhesion of Pressure-Sensitive Tape

1892     ASTM D3335 (1985a; R 2009) Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

1893     ASTM D3350 (2012) Polyethylene Plastics Pipe and Fittings Materials

1894     ASTM D3359 (2009; E 2010; R 2010) Measuring Adhesion by Tape Test

1895     ASTM D3363 (2005; E 2011; R 2011; E 2012) Film Hardness by Pencil Test

1896     ASTM D3370 (2010) Sampling Water from Closed Conduits ASTM D3381/D3381M (2013) Viscosity-Graded Asphalt Cement for Use in

1897     ASTM D3381/D3381M (2013) Viscosity-Graded Asphalt Cement for Use in Pavement Construction

1898     ASTM D3389 (2010) Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)

1899     ASTM D3418 (2012) Transition Temperatures of Polymers by Differential Scanning Calorimetry

1900     ASTM D3427 (2012) Standard Test Method for Air Release Properties of Petroleum Oils

1901     ASTM D3451 (2006; R 2012) Testing Coating Powders and Powder Coatings

1902     ASTM D3455 (2011) Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin

1903     ASTM D3462/D3462M (2010a) Standard Specification for Asphalt Shingles Made From Glass Felt and Surfaced with Mineral Granules

1904     ASTM D3464 (1996; R 2007) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer

1905     ASTM D3465 (2000; E 2007; R 2007) Standard Test Method for Purity of Monmeric Plasticizers by Gas Chromatography

1906     ASTM D3487 (2009) Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus

1907     ASTM D3498 (2003; R 2011) Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

1908     ASTM D3551 (2008) Laboratory Preparation of Soil-Lime Mixtures Using a Mechanical Mixer

1909     ASTM D3567 (1997; R 2011) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

1910     ASTM D3574 (2011) Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

1911     ASTM D3575 (2014) Flexible Cellular Materials Made From Olefin Polymers

1912     ASTM D3595 (2002; R 2007) Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

1913     ASTM D3612 (2002; R 2009) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

1914     ASTM D3617 (2007) Sampling and Analysis of New Built-Up Roof Membranes

1915     ASTM D3625/D3625M (2012) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

1916     ASTM D3656/D3656M (2013) Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns

1917     ASTM D3665 (2012) Random Sampling of Construction Materials ASTM D3666 (2013) Standard Specification for Minimum

1918     ASTM D3666 (2013) Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

1919     ASTM D3667 (2005; R 2010) Rubber Seals Used in Flat-Plate Solar Collectors

1920     ASTM D3676 (2013) Rubber Cellular Cushion Used for Carpet or Rug Underlay

1921     ASTM D3678 (1997; E 2008; R 2008) Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Interior-Profile Extrusions

1922     ASTM D3681 (2006) Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

1923     ASTM D3689 (2007; E 2013; R 2013) Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

1924     ASTM D3691/D3691M (2009) Woven, Lace, and Knit Household Curtain and Drapery Fabrics

1925     ASTM D3699 (2013b) Standard Specification for Kerosene

1926     ASTM D3718 (1985a; R 2010) Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

1927     ASTM D3721 (2005; R 2011) Synthetic Red Iron Oxide Pigment ASTM D3737 (2012) Standard Practice for Establishing Allowable

1928     ASTM D3737 (2012) Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

1929     ASTM D374 (1999; R 2004) Thickness of Solid Electrical Insulation

1930     ASTM D3740 (2012a) Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

1931     ASTM D3744/D3744M (2011a) Standard Test Method for Aggregate Durability Index

1932     ASTM D374M (1999; R 2005) Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)

1933     ASTM D3753 (2012; E 2013) Glass-Fiber-Reinforced Polyester Manholes and Wetwells

1934     ASTM D3754 (2011) “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure

1935     ASTM D3775 (2012) Warp End Count and Filling Pick Count of Woven Fabric

1936     ASTM D3776/D3776M (2009a; R 2013) Standard Test Method for Mass Per Unit Area (Weight) of Fabric

1937     ASTM D3786/D3786M (2013) Hydraulic Bursting Strength of Textile Fabrics-Diaphragm Bursting Strength Tester Method

1938     ASTM D3787 (2007; R 2011) Bursting Strength of Textiles – Constant-Rate-of-Traverse (CRT), Ball Burst Test

1939     ASTM D3802 (2010) Ball-Pan Hardness of Activated Carbon ASTM D3833/D3833M (1996; R 2011) Water Vapor Transmission of

1940     ASTM D3833/D3833M (1996; R 2011) Water Vapor Transmission of Pressure-Sensitive Tapes

1941     ASTM D3839 (2008) Underground Installation of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

1942     ASTM D3840 (2010) “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

1943     ASTM D3841 (1997; E 2008; R 2008) Standard Specification for Glass Fiber-Reinforced Polyester Plastic Panels

1944     ASTM D3846 (2008) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

1945     ASTM D3860 (1998; R 2008) Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

1946     ASTM D3867 (2009) Nitrite-Nitrate in Water

1947     ASTM D3884 (2009; R 2013) Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)

1948     ASTM D3887 (1996; R 2008) Standard Specification for Tolerances for Knitted Fabrics

1949     ASTM D3892 (1993; R 2009) Packaging/Packing of Plastics

1950     ASTM D3895 (2007) Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

1951     ASTM D390 (1992; R 1999) Coal-Tar Creosote for the Preservative Treatment of Piles, Poles and Timbers for Marine, Land, and Fresh Water Use

1952     ASTM D3910 (2011) Design, Testing, and Construction of Slurry Seal

1953     ASTM D3915 (2006) Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications

1954     ASTM D3916 (2008) Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

1955     ASTM D3924 (1980; R 2011) Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

1956     ASTM D3925 (2002; R 2010) Sampling Liquid Paints and Related Pigmented Coatings

1957     ASTM D395 (2003; R 2008) Standard Test Methods for Rubber Property – Compression Set

1958     ASTM D3951 (2010) Commercial Packaging

1959     ASTM D396 (2013c) Standard Specification for Fuel Oils

1960     ASTM D3960 (2005; R 2013) Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings

1961     ASTM D3965 (2011) Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

1962     ASTM D3966/D3966M (2007) Standard Test Methods for Deep Foundations Under Lateral Load

1963     ASTM D4 (1986; R 2010) Bitumen Content ASTM D4000 (2013) Standard Classification System for

1964     ASTM D4000 (2013) Standard Classification System for Specifying Plastic Materials

1965     ASTM D4016 (2008) Viscosity of Chemical Grouts by Brook field Viscometer (Laboratory Method)

1966     ASTM D402 (2008) Distillation of Cut-Back Asphaltic (Bituminous) Products

1967     ASTM D4020 (2011) Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

1968     ASTM D4024 (2012) Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

1969     ASTM D4057 (2012) Standard Practice for Manual Sampling of Petroleum and Petroleum Products

1970     ASTM D4059 (2000; R 2010) Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

1971     ASTM D4060 (2010) Abrasion Resistance of Organic Coatings by the Taber Abraser

1972     ASTM D4068 (2009) Chlorinated Polyethylene Sheeting for Concealed Water-Containment Membrane

1973     ASTM D4073 (2006; R 2013) Standard Test Method for Tensile-Tear Strength of Bituminous Roofing

1974     ASTM D4078 (2002; R 2008) Water Emulsion Floor Polish

1975     ASTM D4093 (1995; R 2010) Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

1976     ASTM D4097 (2001; R 2010) Contact-Molded Glass-Fiber-Reinforced Thermoset Resin

1977     ASTM D41/D41M (2011) Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

1978     ASTM D4101 (2011) Standard Specification for Polypropylene Injection and Extrusion Materials

1979     ASTM D412 (2006a; R 2013) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension

1980     ASTM D4125/D4125M (2010) Asphalt Content of Bituminous Mixtures by the Nuclear Method

1981     ASTM D413 (1998; R 2013) Rubber Property – Adhesion to Flexible Substrate

1982    ASTM D4157 (2013) Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)

1983     ASTM D4161 (2001; R 2010) “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

1984     ASTM D4167 (1997; R 2007) Fiber-Reinforced Plastic Fans and Blowers

1985     ASTM D4177 (1995; R 2010) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

1986     ASTM D420 (1998; R 2003) Site Characterization for Engineering Design, and Construction Purposes

1987     ASTM D4214 (2007) Standard Test Method for Evaluating the Degree of Chalking of Exterior Paint Films

1988     ASTM D4216 (2013) Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds

1989     ASTM D4218 (1996; R 2008) Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique

1990     ASTM D422 (1963; R 2007; E 2014) Particle-Size Analysis of Soils

1991     ASTM D4220 (1995; R 2007) Preserving and Transporting Soil Samples

1992     ASTM D4253 (2000; R 2006) Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

1993     ASTM D4254 (2000; R 2006; E 2008) Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

1994     ASTM D4259 (1988; R 2012) Standard Practice for Abrading Concrete

1995     ASTM D4263 (1983; R 2012) Indicating Moisture in Concrete by the Plastic Sheet Method

1996     ASTM D4280 (2012) Extended Life Type, Nonplowable, Raised, Retroreflective Pavement Markers

1997     ASTM D4285 (1983; R 2012) Indicating Oil or Water in Compressed Air

1998     ASTM D429 (2008) Rubber Property-Adhesion to Rigid Substrates ASTM D43/D43M (2000; R 2012) Standard Specification for Coal Tar

1999     ASTM D43/D43M (2000; R 2012) Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

2000     ASTM D430 (2006; R 2012) Standard Test Methods for Rubber Deterioration – Dynamic Fatigue

2001     ASTM D4318 (2010; E 2014) Liquid Limit, Plastic Limit, and Plasticity Index of Soils

2002     ASTM D4329 (2013) Standard Practice for Fluorescent UV Exposure of Plastics

2003     ASTM D4354 (2012) Sampling of Geosynthetics for Testing

2004     ASTM D4355 (2007) Deterioration of Geotextiles from Exposure to Light, Moisture and Heat in a Xenon-Arc Type Apparatus

2005     ASTM D4357 (1996) Plastic Laminates Made from Woven-Roving and Woven-Yarn Glass Fabrics

2006     ASTM D4380 (2012) Standard Test Method for Density of Bentonitic Slurries

2007     ASTM D4397 (2010) Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

2008     ASTM D4400 (1999; E 2012; R 2012) Sag Resistance of Paints Using a Multinotch Applicator

2009     ASTM D4402/D4402M (2013) Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

2010     ASTM D4417 (2011) Field Measurement of Surface Profile of Blast Cleaned Steel

2011     ASTM D4427 (2013) Peat Samples by Laboratory Testing

2012     ASTM D4434/D 4434M (2012) Poly(Vinyl Chloride) Sheet Roofing

2013     ASTM D4439 (2011) Geosynthetics

2014     ASTM D4444 (2013) Use and Calibration of Hand-Held Moisture Meters

2015     ASTM D445 (2012) Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)

2016     ASTM D4479/D4479M (2007; E 2012; R 2012) Asphalt Roof Coatings – Asbestos-Free

2017     ASTM D448 (2012) Sizes of Aggregate for Road and Bridge Construction

2018     ASTM D449/D449M (2003; R 2014; E 2014) Asphalt Used in Dampproofing and Waterproofing

2019     ASTM D4491 (1999a; R 2014; E 2014) Water Permeability of Geotextiles by Permittivity

2020     ASTM D450/D450M (2007; E 2013; R 2013) Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

2021     ASTM D4501 (2001; E 2009; R 2009) Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

2022     ASTM D4505 (2012) Preformed Retroflective Pavement Marking Tape for Extended Service Life

2023     ASTM D4533 (2011) Trapezoid Tearing Strength of Geotextiles

2024     ASTM D4541 (2009; E 2010) Pull-Off Strength of Coatings Using Portable Adhesion Testers

2025     ASTM D4551 (2012) Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

2026     ASTM D4552/D4552M (2010) Classifying Hot-Mix Recycling Agents

2027     ASTM D4586/D4586M (2007; E 2012; R 2012) Asphalt Roof Cement, Asbestos-Free

2028     ASTM D4587 (2011) Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related

2029     UV-Condensation Exposures of Paint and Related Coatings

2030     ASTM D4595 (2011) Tensile Properties of Geotextiles by the Wide-Width Strip Method

2031     ASTM D4601/D4601M (2004; R 2012) Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

2032     ASTM D4607 (1994; R 2011) Determination of Iodine Number of Activated Carbon

2033     ASTM D4632/D4632M (2008; E 2013; R 2013) Grab Breaking Load and Elongation of Geotextiles

2034     ASTM D4635 (2008a) Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications

2035     ASTM D4637/D4637M (2013) EPDM Sheet Used in Single-Ply Roof Membrane ASTM D4643 (2008) Determination of Water (Moisture) Content of

2036     ASTM D4643 (2008) Determination of Water (Moisture) Content of Soil by the Microwave Oven Method

2037     ASTM D4689 (2012) Standard Specification for Adhesive, Casein-Type

2038     ASTM D4690 (2012) Standard Specification for Urea Formaldehyde Resin Adhesives

2039     ASTM D470 (2013) Crosslinked Insulations and Jackets for Wire and Cable

2040     ASTM D471 (2012a) Standard Test Method for Rubber Property – Effect of Liquids

2041     ASTM D4716/D4716M (2008; R 2013) Determining the (In-Plane) Flow Rate Per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

2042     ASTM D4745 (2011a; E 2001) Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials

2043     ASTM D4750 (1987; R 2001) Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)

2044     ASTM D4751 (2012) Determining Apparent Opening Size of a Geotextile

2045     ASTM D4759 (2011) Determining the Specification Conformance of Geosynthetics

2046     ASTM D476 (2013) Dry Pigmentary Titanium Dioxide Pigments

2047     ASTM D4791 (2010) Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

2048     ASTM D4802 (2010) Poly(Methyl Methacrylate) Acrylic Plastic Sheet

2049     ASTM D4811/D4811M (2006; E 2013; R 2013) Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

2050     ASTM D4814 (2013b) Automotive Spark-Ignition Engine Fuel

2051     ASTM D4832 (2010) Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

2052     ASTM D4833/D4833M (2007; E 2013; R 2013) Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products

2053     ASTM D4840 (1999; R 2010) Sampling Chain-Of-Custody Procedures

2054     ASTM D4867/D4867M (2009) Effect of Moisture on Asphalt Concrete Paving Mixtures

2055     ASTM D4869/D4869M (2005; E 2011; R 2011) Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

2056     ASTM D4873 (2002; R 2009) Identification, Storage, and Handling of Geosynthetic Rolls and Samples

2057     ASTM D4884/D4884M (2014) Strength of Sewn or Thermally Bonded Seams of Geotextiles

2058     ASTM D4887/D4887M (2011) Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

2059     ASTM D4897/D4897M (2001; R 2009) Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

2060     ASTM D490 (1992; R 2011) Road Tar

2061     ASTM D4944 (2011) Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester Method

2062     ASTM D4945 (2012) High-Strain Dynamic Testing of Piles

2063     ASTM D495 (1999; R 2004) Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

2064     ASTM D4959 (2007) Determination of Water (Moisture) Content of Soil by Direct Heating

2065     ASTM D4972 (2013) pH of Soils

2066     ASTM D4976 (2012a) Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

2067     ASTM D4992 (2007) Evaluation of Rock to be Used for Erosion Control

2068     ASTM D5 (2006; E 2006) Penetration of Bituminous Materials

2069     ASTM D5034 (2009; R 2013) Breaking Strength and Elongation of Textile Fabrics (Grab Test)

2070     ASTM D5035 (2011) Breaking Force and Elongation of Textile Fabrics (Strip Method)

2071     ASTM D5079 (2008) Preserving and Transporting Rock Core Samples

2072     ASTM D5084 (2010) Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

2073     ASTM D5088 (2002; R 2008) Decontamination of Field Equipment Used at Nonradioactive Waste Sites

2074     ASTM D5092 (2004; E 2010; R 2010) Design and Installation of Ground Water Monitoring Wells in Aquifers

2075     ASTM D5102 (2009) Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

2076     ASTM D5106 (2013) Steel Slag Aggregates for Bituminous Paving Mixtures

2077     ASTM D5116 (2010) Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products

2078     ASTM D512 (2012) Chloride Ion in Water

2079     ASTM D5147/D5147M (2014) Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

2080     ASTM D5148 (2010) Standard Test Method for Centrifuge Kerosine Equivalent

2081     ASTM D5158 (1998; R 2013) Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving

2082     ASTM D516 (2011) Sulfate Ion in Water

2083     ASTM D517 (1998; R 2008) Asphalt Plank

2084     ASTM D5195 (2008) Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods ASTM D5199 (2012) Measuring Nominal Thickness of Geosynthetics

2085     ASTM D5199 (2012) Measuring Nominal Thickness of Geosynthetics

2086     ASTM D520 (2000; R 2011) Zinc Dust Pigment

2087     ASTM D5203 (2007) Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

2088     ASTM D522 (1993a; R 2008) Mandrel Bend Test of Attached Organic Coatings

2089     ASTM D522/D522M (2014) Mandrel Bend Test of Attached Organic Coatings

2090     ASTM D5228 (1992; R 2010) Determination of the Butane Working Capacity of Activated Carbon

2091     ASTM D523 (2014) Standard Test Method for Specular Gloss

2092     ASTM D5249 (2010) Backer Material for Use with Cold-and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

2093     ASTM D5261 (2010) Measuring Mass Per Unit Area of Geotextiles

2094     ASTM D5262 (2007) Evaluating the Unconfined Tension Creep Behavior of Geosynthetics

2095     ASTM D5268 (2013) Topsoil Used for Landscaping Purposes

2096     ASTM D5299 (1999; E 2012; R 2012) Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

2097     ASTM D5312/D5312M (2012; R 2013) Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

2098     ASTM D5313/D5313M (2012; R 2013) Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

2099     ASTM D5321/D5321M (2014) Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method

2100     ASTM D5385 (1993; R 2006) Hydrostatic Pressure Resistance of Waterproofing Membranes

2101     ASTM D5397 (2007; R 2012) Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched

2102     ASTM D542 (2013) Index of Refraction of Transparent Organic Plastics

2103     ASTM D5420 (2010) Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Strike Impacted by a Falling Weight (Gardner Impact)

2104     ASTM D5421 (2005; R 2010) Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

2105     ASTM D543 (2006) Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

2106     ASTM D5434 (2012) Field Logging of Subsurface Explorations of Soil and Rock

2107     ASTM D5444 (2008) Mechanical Size Analysis of Extracted Aggregate

2108     ASTM D5456 (2013a) Evaluation of Structural Composite Lumber Products

2109     ASTM D546 (2010) Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

2110     ASTM D5469/D5469M (2012) Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

2111     ASTM D5505 (2006) Classifying Emulsified Recycling Agents

2112     ASTM D5519 (2007) Particle Size Analysis of Natural and Man-Made Riprap Materials

2113     ASTM D5521/D5521M (2013) Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers

2114     ASTM D5539 (2013) Seed Starter Mix

2115     ASTM D5543 (2009) Standard Test Methods for Low-Level Dissolved Oxygen in Water

2116     ASTM D558 (2011) Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

2117     ASTM D559 (2003) Wetting and Drying Compacted Soil-Cement Mixtures

2118     ASTM D5590 (2000; R 2010; E 2012) Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

2119     ASTM D5596 (2003; R 2009) Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

2120     ASTM D56 (2005; R 2010) Flash Point by Tag Closed Cup Tester

2121     ASTM D560 (2003) Freezing and Thawing Compacted Soil-Cement Mixtures

2122     ASTM D5603 (2001; R 2008) Rubber Compounding Materials – Recycled Vulcanizate Particulate Rubber

2123     ASTM D5608 (2010) Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

2124     ASTM D561 (1982; R 2008) Carbon Black Pigment for Paint

2125     ASTM D562 (2010) Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

2126     ASTM D5641 (1994; R 2011) Geomembrane Seam Evaluation by Vacuum Chamber

2127     ASTM D566 (2002; R 2009) Dropping Point of Lubricating Grease

2128     ASTM D5663 (1997; R 2011) Validating Recycled Content in Packaging Paper and Paperboard

2129     ASTM D5677 (2005; R 2010) Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings,

2130     ASTM D5685 (2011) “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

2131     ASTM D570 (1998; E 2010; R 2010) Standard Test Method for Water Absorption of Plastics

2132     ASTM D572 (2004; R 2010) Rubber Deterioration by Heat and Oxygen

2133     ASTM D5721 (2008; R 2013) Air-Oven Aging of Polyolefin Geomembranes

2134     ASTM D5727/D5727M (2000; E 2011; R 2011) Emulsified Refined Coal Tar (Mineral Colloid Type)

2135     ASTM D573 (2004; R 2010) Standard Test Method for Rubber – Deterioration in an Air Oven

2136     ASTM D575 (1991; R 2012) Rubber Properties in Compression

2137     ASTM D5759 (2012) Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

2138     ASTM D578/D578M (2005; E 2011; R 2011) Glass Fiber Strands

2139     ASTM D579 (2010) Standard Specification for Greige Woven Glass Fabrics

2140     ASTM D579/D579M (2010) Standard Specification for Greige Woven Glass Fabrics

2141     ASTM D5793 (2013) Binding Sites Per Unit Length or Width of Pile Yarn Floor Coverings

2142     ASTM D5821 (2013) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

2143     ASTM D5848 (2010; E 2010) Mass Per Unit Area of Pile Yarn Floor Coverings

2144     ASTM D5851 (1995; R 2011) Planning and Implementing a Water Monitoring Program

2145     ASTM D5852 (2000; R 2007) Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

2146     ASTM D5864 (2011) Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

2147     ASTM D5885 (2006; R 2012) Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

2148     ASTM D5887 (2009) Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

2149     ASTM D5888 (2006; R 2011) Storage and Handling of Geosynthetic Clay Liners

2150     ASTM D5889 (2011) Quality Control of Geosynthetic Clay Liners ASTM D5890 (2011) Swell Index of Clay Mineral Component of

2151     ASTM D5890 (2011) Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

2152     ASTM D5891 (2002; R 2009) Fluid Loss of Clay Component of Geosynthetic Clay Liners

2153     ASTM D5893/D5893M (2010) Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

2154     ASTM D5894 (2010) Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

2155     ASTM D5948 (2005; R 2012) Standard Specification for Molding Compounds, Thermosetting

2156     ASTM D596 (2001; R 2011) Reporting Results of Analysis of Water

2157     ASTM D5993 (1999; R 2009) Measuring Mass Per Unit of Geosynthetic Clay Liners

2158     ASTM D5994 (2010) Measuring Core Thickness of Textured Geomembrane

2159     ASTM D6/D6M (1995; E 2011; R 2011) Loss on Heating of Oil and Asphaltic Compounds

2160     ASTM D6007 (2002; R 2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

2161     ASTM D6072/D6072M (2009) Obtaining Samples of Geosynthetic Clay Liners

2162     ASTM D6081 (1998; R 2009) Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

2163     ASTM D610 (2008; R 2012) Evaluating Degree of Rusting on Painted Steel Surfaces

2164     ASTM D6108 (2013) Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

2165     ASTM D6109 (2013) Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

2166     ASTM D6111 (2013a) Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement

2167     ASTM D6112 (2013) Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

2168     ASTM D6117 (2013) Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

2169     ASTM D6155 (2013) Nontraditional Coarse Aggregate for Bituminous Paving Mixtures

2170     ASTM D6162 (2000a; R 2008) Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

2171     ASTM D6163 (2000; R 2008) Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

2172     ASTM D6164/D6164M (2011) Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

2173     ASTM D6222/D6222M (2011) Atactic Polypropylene (ARP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

2174     ASTM D6223/D6223M (2002; E 2009; R 2009) Standard Specification for Atactic Polypropylene (ARP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

2175     ASTM D6226 (2010) Standard Test Method for Open Cell Content of Rigid Cellular Plastics

2176     ASTM D6237 (2009) Painting Inspectors (Concrete and Masonry Substrates)

2177     ASTM D624 (2000; R 2012) Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

2178     ASTM D6241 (2004; R 2009; E 2014) Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

2179     ASTM D6243/D6243M (2013a) Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

2180     ASTM D6245 (2012) Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

2181     ASTM D6270 (2008; R 2012) Use of Scrap Tires in Civil Engineering Applications

2182     ASTM D6298 (2013) Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheet with Factory Applied Metal Surface

2183     ASTM D6304 (2007) Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

2184     ASTM D6307 (2010) Asphalt Content of Hot Mix Asphalt by Ignition Method

2185     ASTM D633 (2011) Volume Correction Table for Road Tar

2186     ASTM D6330 (1998; R 2008) Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

2187     ASTM D6345 (2010) Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

2188     ASTM D635 (2010) Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position

2189     ASTM D6368 (2006; R 2012) Standard Specification for Vapor-Degreasing Grade, and General Grade Normal – Propyl Bromide

2190     ASTM D6369 (1999; R 2006) Design of Standard Flashing Details for EPDM Roof Membranes

2191     ASTM D638 (2010) Standard Test Method for Tensile Properties of Plastics

2192     ASTM D6380/D6380M (2003; E 2013; R 2013) Standard Specification for Asphalt Roll Roofing (Organic Felt)

2193     ASTM D6386 (2010) Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

2194     ASTM D6390 (2011) Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

2195     ASTM D6392 (2012) Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

2196     ASTM D648 (2007) Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

2197     ASTM D6496 (2004a; R 2009) Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

2198     ASTM D6497 (2002; R 2010) Mechanical Attachment of Geomembrane to Penetrations or Structures

2199     ASTM D6629 (2001; E 2012; R 2012) Selection of Methods for Estimating Soil Loss by Erosion

2200     ASTM D6637 (2011) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

2201     ASTM D6638 (2011) Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

2202     ASTM D664 (2011a) Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

2203     ASTM D665 (2012) Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the

2204     ASTM D6662 (2013) Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

2205     ASTM D6690 (2012) Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt

2206     ASTM D6706 (2001; R 2013) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

2207     ASTM D6725 (2004; R 2010) Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells

2208     ASTM D6754/D6754M (2010) Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

2209     ASTM D6757 (2007; R 2013) Standard Specification for Underlayment Felt Containing Inorganic Fibers Used

2210     ASTM D6765 (2012) Standard Practice for Live Staking

2211     ASTM D6768 (2004; R 2009) Tensile Strength of Geosynthetic Clay Liners

2212     ASTM D6836 (2002; E 2008; R 2008; E 2009) Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

2213     ASTM D6859 (2011) Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

2214     ASTM D6871 (2003; R 2008) Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

2215     ASTM D692/D692M (2009) Coarse Aggregate for Bituminous Paving Mixtures

2216     ASTM D6925 (2009) Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

2217     ASTM D6926 (2010) Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

2218     ASTM D6927 (2006) Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

2219     ASTM D6938 (2010) Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

2220     ASTM D695 (2010) Standard Test Method for Compressive Properties of Rigid Plastics

2221     ASTM D696 (2008; E 2013) Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30 degrees C and 30 degrees C With a Vitreous Silica Dilatometer

2222    ASTM D698 (2012; E 2014) Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/cu. ft. (600 kN-m/cu. m.))

2223     ASTM D70 (2009; E 2009) Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)

2224     ASTM D7005 (2003; R 2008) Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

2225     ASTM D709 (2013) Laminated Thermosetting Materials

2226     ASTM D7091 (2013) Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nondestructive Coatings Applied to Non-Ferrous Metals

2227     ASTM D711 (2010) No-Pick-Up Time of Traffic Paint

2228     ASTM D7116 (2005) Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavement

2229     ASTM D7127 (2013) Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces using a Portable

2230     ASTM D714 (2002; R 2009) Evaluating Degree of Blistering of Paints

2231     ASTM D7155 (2011) Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

2232     ASTM D7238 (2006; R 2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

2233     ASTM D7258 (2014) Standard Specification for Polymeric Piles

2234     ASTM D737 (2004; R 2012) Air Permeability of Textile Fabrics

2235     ASTM D740 (2011) Methyl Ethyl Ketone

2236     ASTM D746 (2013) Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

2237     ASTM D7466 (2010) Standard Test Method for Measuring Asperity Height of Textured Geomembranes

2238     ASTM D75/D75M (2013) Standard Practice for Sampling Aggregates

2239     ASTM D751 (2006; R 2011) Coated Fabrics

2240     ASTM D7611/D7611M (2013) Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

2241     ASTM D774/D774M (1997; R 2007) Bursting Strength of Paper

2242     ASTM D785 (2008) Rockwell Hardness of Plastics and Electrical Insulating Materials

2243     ASTM D789 (2007; E 2010) Determination of Relative Viscosity and Moisture Content of Polyamide (PA)

2244     ASTM D790 (2010) Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

2245     ASTM D792 (2013) Density and Specific Gravity (Relative Density) of Plastics by Displacement

2246     ASTM D814 (1995; R 2010) Rubber Property – Vapor Transmission of Volatile Liquids

2247     ASTM D822 (2001; R 2006) Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

2248     ASTM D823 (1995; E 2012; R 2012) Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels.

2249     ASTM D841 (2013) Nitration Grade Toluene

2250     ASTM D854 (2010) Specific Gravity of Soil Solids by Water Pycnometer

2251     ASTM D877 (2002; R 2007) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

2252     ASTM D877/D877M (2013) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk

2253     ASTM D882 (2012) Tensile Properties of Thin Plastic Sheeting

2254     ASTM D883 (2011) Terminology Relating to Plastics

2255     ASTM D888 (2012; E 2013) Dissolved Oxygen in Water

2256     ASTM D892 (2013) Standard Test Method for Foaming Characteristics of Lubricating Oils

2257     ASTM D903 (1998; R 2010) Peel or Stripping Strength of Adhesive Bonds

2258     ASTM D905 (2008; E 2009) Strength Properties of Adhesive Bonds in Shear by Compression Loading

2259     ASTM D92 (2012b) Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

2260     ASTM D923 (2007) Standard Practice for Sampling Electrical Insulating Liquids

2261     ASTM D924 (2008) Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

2262     ASTM D93 (2013; E 2014) Flash-Point by Pensky-Martens Closed Cup Tester

2263     ASTM D943 (2004a; E 2010; R 2010) Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

2264     ASTM D946/D946M (2009a) Penetration-Graded Asphalt Cement for Use in Pavement Construction

2265     ASTM D953 (2010) Standard Test Method for Bearing Strength of Plastics

2266     ASTM D962 (1981; E 2008; R 2008) Aluminum Powder and Paste Pigments for Paints

2267     ASTM D968 (2005; R 2010) Abrasion Resistance of Organic Coatings by Falling Abrasive

2268     ASTM D97 (2012) Pour Point of Petroleum Products

2269     ASTM D974 (2012) Standard Test Method for Acid and Base Number by Color-Indicator Titration

2270     ASTM D975 (2013a) Standard Specification for Diesel Fuel Oils

2271     ASTM D977 (2013; E 2014) Emulsified Asphalt

2272     ASTM D979/D979M (2012) Sampling Bituminous Paving Mixtures

2273     ASTM D98 (2005; R 2013) Calcium Chloride

2274     ASTM D995 (1995b; R 2002) Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures

2275     ASTM DEFONLINE (2008) ASTM Online Dictionary of Engineering Science and Technology

2276     ASTM E1 (2013) Standard Specification for ASTM Liquid-in-Glass Thermometers

2277     ASTM E10 (2012) Brinell Hardness of Metallic Materials

2278     ASTM E100 (2010) ASTM Hydrometers

2279     ASTM E1042 (2002; E 2008; R 2008) Acoustically Absorptive Materials Applied by Trowel or Spray

2280     ASTM E1067/E1067M (2011) Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

2281     ASTM E108 (2011) Fire Tests of Roof Coverings

2282     ASTM E11 (2013) Wire Cloth and Sieves for Testing Purposes

2283     ASTM E110 (2010) Indentation Hardness of Metallic Materials by Portable Hardness Testers

2284     ASTM E1105 (2000; R 2008) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

2285     ASTM E1146 (2008) Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)

2286     ASTM E1155 (1996; R 2008) Standard Test Method for Determining Floor Flatness and Floor Levelness Numbers

2287     ASTM E1155M (1996; R 2008) Standard Test Method for Determining Floor Flatness and Floor Levelness Numbers (Metric)

2288     ASTM E1186 (2003; R 2009) Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

2289     ASTM E119 (2012a) Standard Test Methods for Fire Tests of Building Construction and Materials

2290     ASTM E122 (2009; E 2011) Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process

2291     ASTM E125 (1963; R 2013) Photographs for Magnetic Particle Indications on Ferrous Castings

2292     ASTM E126 (2013a) Inspection and Verification of Hydrometers

2293     ASTM E1264 (2008; E 2010) Acoustical Ceiling Products

2294     ASTM E1274 (2003; R 2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph

2295     ASTM E1289 (2008) Standard Specification for Reference Specimen for Sound Transmission Loss

2296     ASTM E1300 (2012a; E 2012) Determining Load Resistance of Glass in Buildings

2297     ASTM E1333 (2010) Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber

2298     ASTM E1347 (2006; R 2011) Color and Color Difference Measurement by Tristimulus (Filter) Colorimetry

2299     ASTM E136 (2012) Behavior of Materials in a Vertical Tube Furnace at 750 Degrees C

2300     ASTM E1368 (2014) Visual Inspection of Asbestos Abatement Projects

2301     ASTM E1399/E1399M (1997; E 2013;R 2013) Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

2302     ASTM E1414/E1414M (2011a) Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

2303     ASTM E1424 (1991; R 2008) Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

2304     ASTM E1477 (1998a; R 2013) Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere

2305     ASTM E1494 (2012) Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials

2306     ASTM E152 (1981ae1) Fire Tests of Door Assemblies

2307     ASTM E154/E154M (2008a; R 2013; E 2013) Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

2308     ASTM E1592 (2005; R 2012) Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

2309     ASTM E1613 (2012) Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES),

2310     ASTM E162 (2013) Surface Flammability of Materials Using a Radiant Heat Energy Source

2311     ASTM E164 (2013) Ultrasonic Contact Examination of Weldments

2312     ASTM E1643 (2011) Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

2313     ASTM E1644 (2004; E 2012; R 2012) Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

2314     ASTM E1646 (1995; R 2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Air Pressure Difference

2315     ASTM E165 (2009) Standard Test Method for Liquid Penetrant Examination

2316     ASTM E165/E165M (2012) Standard Practice for Liquid Penetrant Examination for General Industry

2317     ASTM E168 (2006) General Techniques of Infrared Quantitative Analysis

2318     ASTM E169 (2004; R 2009) General Techniques of Ultraviolet-Visible Quantitative Analysis

2319     ASTM E1726 (2001; R 2009) Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

2320     ASTM E1727 (2005) Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques

2321     ASTM E1728 (2010) Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

2322     ASTM E1745 (2011) Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

2323     ASTM E1792 (2003; R 2011) Wipe Sampling Materials for Lead in Surface Dust

2324     ASTM E18 (2012) Standard Test Methods for Rockwell Hardness of Metallic Materials

2325     ASTM E1827 (2011) Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

2326     ASTM E1886 (2013a) Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

2327     ASTM E1966 (2007; R 2011) Fire-Resistive Joint Systems

2328     ASTM E1971 (2005; R 2011) Stewardship for the Cleaning of Commercial and Institutional Buildings

2329     ASTM E1991 (2005) Environmental Life Cycle Assessment of Building Materials/Products

2330     ASTM E1993/E1993M (1998; R 2013; E 2013) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

2331     ASTM E1996 (2012a) Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

2332     ASTM E2016 (2011) Standard Specification for Industrial Woven Wire Cloth

2333     ASTM E2029 (2011) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

2334     ASTM E204 (1998; R 2007) Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index

2335     ASTM E2074 (2000e1) Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies

2336     ASTM E2098/E2098M (2013) Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS) after Exposure to a Sodium Hydroxide Solution

2337     ASTM E2112 (2007) Standard Practice for Installation of Exterior Windows, Doors and Skylights

2338     ASTM E2114 (2008) Standard Terminology for Sustainability Relative to the Performance of Buildings

2339     ASTM E2129 (2010) Standard Practice for Data Collection for Sustainability Assessment of Building Products

2340     ASTM E2140 (2001; R 2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

2341     ASTM E2174 (2010a; E 2011) Standard Practice for On-Site Inspection of Installed Fire Stops

2342     ASTM E2190 (2010) Standard Specification for Insulating Glass Unit Performance and Evaluation

2343     ASTM E2226 (2012) Standard Practice for Application of Hose Stream

2344     ASTM E2231 (2009) Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

2345     ASTM E228 (2011) Standard Test Method for Linear Thermal Expansion of Solid Materials with a Push-Rod Dilatometer

2346     ASTM E230/E230M (2012) Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples

2347     ASTM E2307 (2010) Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus

2348     ASTM E2336 (2004; R 2013) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

2349     ASTM E2356 (2014) Standard Practice for Comprehensive Building Asbestos Surveys

2350     ASTM E2393 (2010a) Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

2351     ASTM E2461 (2012) Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower

2352     ASTM E2485 (2006) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish

2353     ASTM E2486 (2006) Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

2354     ASTM E2634 (2011) Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

2355     ASTM E2659 (2009; E 2010) Standard Practice for Certificate Programs

2356     ASTM E28 (1999; R 2009) Softening Point of Resins Derived from Naval Stores by Ring and Ball Apparatus

2357     ASTM E283 (2004; R 2012) Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

2358     ASTM E290 (2013) Bend Testing of Material for Ductility

2359     ASTM E308 (2013) Computing the Colors of Objects by Using the

2360     CIE System

2361     ASTM E329 (2013b) Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction

2362     ASTM E330 (2002; R 2010) Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

2363     ASTM E330/E330M (2014) Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

2364     ASTM E331 (2000; R 2009) Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

2365     ASTM E336 (2011) Measurement of Airborne Sound Insulation in Buildings

2366     ASTM E337 (2002; R 2007) Measuring Humidity with a Psychrometer (The Measurement of Wet- and Dry-Bulb Temperatures)

2367     ASTM E34 (2011) Chemical Analysis of Aluminum and Aluminum-Base Alloys

2368     ASTM E376 (2011) Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

2369     ASTM E381 (2001; R 2012) Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

2370     ASTM E390 (2011) Radiographs Steel Fusion Welds

2371     ASTM E413 (2010) Rating Sound Insulation

2372     ASTM E438 (1992; R 2011) Glasses in Laboratory Apparatus

2373     ASTM E446 (2010) Radiographs for Steel Castings Up to 2 In. (51mm) in Thickness

2374     ASTM E488/E488M (2010) Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements

2375     ASTM E514/E514M (2011) Standard Test Method for Water Penetration and Leakage Through Masonry

2376     ASTM E515 (2011) Leaks Using Bubble Emission Techniques

2377     ASTM E543 (2013) Standard Practice for Agencies Performing Non-Destructive Testing

2378     ASTM E546 (2008) Frost Point of Sealed Insulating Glass Units

2379     ASTM E557 (2012) Installation of Operable Partitions

2380     ASTM E576 (2008) Frost Point of Sealed Insulating Glass Units in the Vertical Position

2381     ASTM E580/E580M (2011; E 2013) Application of Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels in Areas Requiring Moderate Seismic Restraint

2382     ASTM E596 (1996; R 2009) Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

2383     ASTM E605 (1993; R 2011) Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

2384     ASTM E648 (2010; E 2011) Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

2385     ASTM E661 (2003; R 2009) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

2386     ASTM E662 (2013d) Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

2387     ASTM E695 (2003; R 2009) Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

2388     ASTM E699 (2009) Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components

2389     ASTM E709 (2008) Standard Guide for Magnetic Particle Examination

2390     ASTM E72 (2013a) Conducting Strength Tests of Panels for Building Construction

2391     ASTM E736 (2000; R 2011) Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural

2392     ASTM E759 (1992; R 2011) Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural

2393     ASTM E760 (1992; R 2011) Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

2394     ASTM E761 (1992; R 2011) Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

2395     ASTM E774 (1997) Classification of the Durability of Sealed Insulating Glass Units

2396     ASTM E779 (2010) Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

2397     ASTM E783 (2002; R 2010) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

2398     ASTM E795 (2005; R 2012) Mounting Test Specimens During Sound Absorption Tests

2399     ASTM E814 (2013a) Standard Test Method for Fire Tests of Through-Penetration Fire Stops

2400     ASTM E831 (2013) Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

2401     ASTM E84 (2013a) Standard Test Method for Surface Burning Characteristics of Building Materials

2402     ASTM E859 (1993; R 2011) Air Erosion of Sprayed Fire-Resistive Materials (SFRMS) Applied to Structural Members

2403     ASTM E90 (2009) Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

2404     ASTM E937 (1993; R 2011) Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

2405     ASTM E94 (2004; R 2010) Radiographic Examination

2406     ASTM E953/E953M (2008) Fusibility of Refuse-Derived Fuel (RDF) Ash

2407     ASTM E96/E96M (2013) Standard Test Methods for Water Vapor Transmission of Materials

2408     ASTM F1007 (1986; R 2007) Pipeline Expansion Joints of the Packed Slip Type for Marine Application

2409     ASTM F1015 (2003; R 2009) Relative Abrasiveness of Synthetic Turf Playing Surfaces

2410     ASTM F104 (2011) Standard Classification System for Nonmetallic Gasket Materials

2411     ASTM F1040 (1987; R 2007) Standard Specification for Filter Units, Air Conditioning, Viscous – Impingement and Dry Types, Replaceable

2412     ASTM F1043 (2013) Strength and Protective Coatings on Metal Industrial Chain-Link Fence Framework

2413     ASTM F1055 (2013) Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and

2414     ASTM F1056 (2004; R 2011) Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

2415     ASTM F1066 (2004; E 2010; R 2010) Standard Specification for Vinyl Composition Floor Tile

2416     ASTM F1077 (2005) Selection of Committee F-16 Fastener Specifications

2417     ASTM F1083 (2013) Standard Specification for Pipe, Steel, Hot-Dipped Zinc Coated (Galvanized) Welded, for Fence Structures

2418     ASTM F1097 (1991; R 2012) Mortar, Refractory (High-Temperature, Air-Setting)

2419     ASTM F1105 (2009) Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

2420     ASTM F1120 (1987; R 2010) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

2421     ASTM F1139 (1988; R 2010) Steam Traps and Drains

2422     ASTM F1172 (1988; R 2010) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

2423     ASTM F1182 (2007; R 2013) Anodes, Sacrificial Zinc Alloy

2424     ASTM F1184 (2005; R 2010) Industrial and Commercial Horizontal Slide Gates

2425     ASTM F1199 (1988; R 2010) Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 degrees F Maximum)

2426     ASTM F1200 (1988; R 2010) Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150 degrees F)

2427     ASTM F1216 (2009) Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

2428     ASTM F1233 (2008; R 2013) Security Glazing Materials and Systems

2429     ASTM F1267 (2012) Metal, Expanded, Steel

2430     ASTM F1290 (1998a; R 2011) Electrofusion Joining Polyolefin Pipe and Fittings

2431     ASTM F1292 (2013) Impact Attenuation of Surface Systems Under and Around Playground Equipment

2432     ASTM F1303 (2004; R 2009) Sheet Vinyl Floor Covering with Backing

2433     ASTM F1344 (2012; E 2013) Rubber Floor Tile

2434     ASTM F1412 (2009) Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

2435     ASTM F1417 (2011a) Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air

2436     ASTM F147 (1987; R 2009) Standard Test Method for Flexibility of Non-Metallic Gasket Material

2437     ASTM F1476 (2007; R 2013) Standard Specification for Performance of Gasketed Mechanical Couplings for

2438     ASTM F148 (2013) Binder Durability of Cork Composition Gasket Materials

2439     ASTM F1482 (2004; E 2009; R 2009) Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring

2440     ASTM F1483 (2012) Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

2441     ASTM F1487 (2011) Playground Equipment for Public Use

2442     ASTM F150 (2006; R 2013) Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

2443     ASTM F1508 (1996; R 2010) Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

2444     ASTM F152 (1995; R 2009) Tension Testing of Nonmetallic Gasket Materials

2445     ASTM F1545 (1997; R 2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and

2446     ASTM F1554 (2007a; E 2011) Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

2447     ASTM F1642 (2012) Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

2448     ASTM F1667 (2013) Driven Fasteners: Nails, Spikes, and Staples

2449     ASTM F1679 (2004e1) Standard Test Method for Using a Variable Incidence Tribometer

2450     ASTM F1697 (2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

2451     ASTM F1700 (2013a) Solid Vinyl Floor Tile

2452     ASTM F1741 (2008) Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

2453     ASTM F1743 (2008) Standard Practice for Rehabilitation of Existing Pipeline and Conduits by Pulled-In-Place

2454     ASTM F1760 (2001; R 2011) Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

2455     ASTM F1803 (2006) Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

2456     ASTM F1852 (2011) Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

2457     ASTM F1859 (2012) Rubber Sheet Floor Covering Without Backing

2458     ASTM F1860 (2012) Rubber Sheet Floor Covering With Backing

2459     ASTM F1861 (2008; E 2012; R 2012) Resilient Wall Base

2460     ASTM F1869 (2011) Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

2461     ASTM F1913 (2004; R 2010) Vinyl Sheet Floor Covering Without Backing

2462     ASTM F1941 (2010) Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

2463     ASTM F1941M (2007) Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Metric)

2464     ASTM F1951 (2009b) Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

2465     ASTM F2015 (2000; R 2013) Standard Specification for Lap Joint Flange Pipe End Applications

2466     ASTM F2034 (2008; R 2013) Sheet Linoleum Floor Covering

2467     ASTM F2155 (2001; R 2009) Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks of Seals

2468     ASTM F2160 (2010) Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

2469     ASTM F2169 (2012) Resilient Stair Treads

2470     ASTM F2170 (2011) Determining Relative Humidity in Concrete Floor Slabs in situ Probes

2471     ASTM F2192 (2005; R 2011) Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Feeders

2472     ASTM F2195 (2013) Linoleum Floor Tile

2473     ASTM F2248 (2012) Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass

2474     ASTM F2280 (2012) Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

2475     ASTM F2329 (2013) Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

2476     ASTM F2373 (2011) Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months

2477     ASTM F2387 (2004; R 2012) Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas, and Hot Tubs

2478     ASTM F2389 (2010) Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

2479     ASTM F2618 (2009) Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

2480     ASTM F2620 (2013) Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

2481     ASTM F2656 (2007) Standard Test Method for Vehicle Crash Testing of Perimeter Barriers

2482     ASTM F2736 (2013) Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

2483     ASTM F2764/F2764M (2011; E 2013) Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

2484     ASTM F2786 (2010) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)

2485     ASTM F2881 (2011) Standard Specification for 12 to 60 in. (300 to 1500 mm) Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

2486     ASTM F2912 (2011) Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings

2487     ASTM F312 (2008) Standard Test Methods for Microscopical Sizing an Counting Particles from Aerospace Fluids on Membrane Filters

2488     ASTM F331 (2013) Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)

2489     ASTM F336 (2002; R 2009) Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

2490     ASTM F36 (1999; R 2009) Compressibility and Recovery of Gasket Materials

2491     ASTM F402 (2005; R 2012) Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

2492     ASTM F405 (2013) Corrugated Polyethylene (PE) Tubing and Fittings

2493     ASTM F409 (2012) Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

2494     ASTM F428 (2009) Intensity of Scratches on Aerospace Glass Enclosures

2495     ASTM F436 (2011) Hardened Steel Washers

2496     ASTM F436M (2011) Hardened Steel Washers (Metric)

2497    ASTM F437 (2009) Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

2498     ASTM F438 (2009) Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

2499     ASTM F439 (2013) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

2500     ASTM F441/F441M (2013; E 2013) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

2501     ASTM F442/F442M (2013; E 2013) Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)

2502     ASTM F446 (1985; R 2009) Grab Bars and Accessories Installed in the Bathing Area

2503     ASTM F467 (2013; E 2014) Standard Specification for Nonferrous Nuts for General Use

2504     ASTM F468 (2012) Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

2505     ASTM F477 (2010) Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

2506     ASTM F480 (2012) Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and

2507     SCH 80

2508     ASTM F493 (2010) Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

2509     ASTM F512 (2012) Smooth-Wall Poly (Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

2510     ASTM F520 (2010) Environmental Resistance of Aerospace Transparencies

2511     ASTM F521 (1983; R 2010) Bond Integrity of Transparent Laminates

2512     ASTM F547 (2006; R 2012) Nails for Use with Wood and Wood-Base Materials

2513     ASTM F548 (2009) Intensity of Scratches on Aerospace Transparent Plastics

2514     ASTM F567 (2011a) Standard Practice for Installation of Chain Link Fence

2515     ASTM F568M (2007) Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

2516     ASTM F585 (2013) Standard Practice for Insertion of Flexible Polyethylene Pipe into Existing Sewers

2517     ASTM F593 (2013a) Stainless Steel Bolts, Hex Cap Screws, and Studs

2518     ASTM F594 (2009; E 2011) Standard Specification for Stainless Steel Nuts

2519     ASTM F626 (2008; R 2013) Standard Specification for Fence Fittings

2520     ASTM F628 (2012; E 2013) Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core

2521     ASTM F656 (2010) Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

2522     ASTM F667 (2012) Large Diameter Corrugated Polyethylene Pipe and Fittings

2523     ASTM F668 (2011) Poly(Vinyl Chloride) (PVC) and other Organic Polymer-Coated Steel Chain-Link Fence Fabric

2524     ASTM F679 (2013a) Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

2525     ASTM F710 (2011) Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

2526     ASTM F714 (2013) Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter

2527     ASTM F735 (2011) Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

2528     ASTM F758 (1995; E 2007; R 2007) Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage

2529     ASTM F791 (1996; R 2013) Stress Crazing of Transparent Plastics

2530     ASTM F793 (2010a) Wallcovering by Durability Characteristics

2531     ASTM F794 (2003; R 2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

2532     ASTM F835 (2013) Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

2533     ASTM F835M (2011) Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

2534     ASTM F836M (2002; R 2010) Standard Specification for Style 1 Stainless Steel Metric Nuts

2535     ASTM F842 (2013) Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

2536     ASTM F844 (2007a; R 2013) Washers, Steel, Plain (Flat), Unhardened for General Use

2537     ASTM F851 (1987; R 2013) Standard Test Method for Self-Rising Seat Mechanisms

2538     ASTM F872 (1984; R 1990) Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable

2539     ASTM F876 (2013a) Crosslinked Polyethylene (PEX) Tubing

2540     ASTM F877 (2011a) Crosslinked Polyethylene (PEX) Plastic Hotand Cold-Water Distribution Systems

2541     ASTM F883 (2013) Padlocks

2542     ASTM F891 (2010) Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core

2543     ASTM F894 (2013) Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

2544     ASTM F900 (2011) Industrial and Commercial Swing Gates

2545     ASTM F949 (2010) Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings

2546     ASTM F959 (2013) Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

2547    ASTM F959M (2013) Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners (Metric)

2548     ASTM G109 (2007; R 2013) Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments E(2000)

2549     ASTM G152 (2013) Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

2550     ASTM G153 (2013) Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

2551     ASTM G154 (2012a) Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials

2552     ASTM G155 (2013) Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

2553     ASTM G21 (2013) Determining Resistance of Synthetic Polymeric Materials to Fungi

2554     ASTM G53 (1996) Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials

2555     ASTM G60 (2001; R 2013) Conducting Cyclic Humidity Exposures

2556     ASTM G71 (1981; R 2009) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

2557     ASTM G82 (1998; R 2009) Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

2558     ASTM SI10 (2010) American National Standard for Use of the International System of Units (SI): The Modern Metric System BAY AREA AIR QUALITY MANAGEMENT DISTRICT (Bay Area AQMD) Bay Area AQMD Rule 8-51 (1992; R 2001) Adhesive and Sealant Products BIFMA INTERNATIONAL (BIFMA)

2559     BAY AREA AIR QUALITY MANAGEMENT DISTRICT (Bay Area AQMD)

2560     Bay Area AQMD Rule 8-51 (1992; R 2001) Adhesive and Sealant Products

2561     BIFMA INTERNATIONAL (BIFMA)

2562     ANSI/BIFMA X5.5 (2008) Desk Products ANSI/BIFMA X5.6 (2010) Panel Systems

2563     ANSI/BIFMA X5.6 (2010) Panel Systems BIOCYCLE, JOURNAL OF COMPOSTING AND RECYCLING (BIOCYCLE)

2564     BIOCYCLE, JOURNAL OF COMPOSTING AND RECYCLING (BIOCYCLE)

2565     BIOCYCLE (Article – Nov 1995, Vol 36, Issue 11) Standardized Test for Evaluation of Compost Self-Heating; Briton, W.F.Jr, et. al.

2566     BRITISH STANDARDS INSTITUTE (BSI)

2567     BS EN 13121-3 (2008; AMD 2012; AMD 2011) GRP Tanks and Vessels for Use Above Ground — Part 3: Design and

2568     BS EN ISO 10497 (2010) Testing of Valves Fire Type-Testing Requirements

2569     ANSI/BHMA A156.1 (2013) Butts and Hinges

2570     ANSI/BHMA A156.10 (2011) Power Operated Pedestrian Doors

2571     ANSI/BHMA A156.11 (2010) Cabinet Locks

2572     ANSI/BHMA A156.115 (2006) Hardware Preparation in Steel Doors and Steel Frames

2573     ANSI/BHMA A156.12 (2013) Interconnected Locks & Latches

2574     ANSI/BHMA A156.13 (2012) Mortise Locks & Latches Series 1000

2575     ANSI/BHMA A156.16 (2013) Auxiliary Hardware

2576     ANSI/BHMA A156.17 (2004; R 2010) Self Closing Hinges & Pivots

2577     ANSI/BHMA A156.18 (2012) Materials and Finishes

2578     ANSI/BHMA A156.2 (2011) Bored and Preassembled Locks and Latches

2579     ANSI/BHMA A156.20 (2006; R 2012) Strap and Tee Hinges, and Hasps

2580     ANSI/BHMA A156.21 (2009) Thresholds

2581     ANSI/BHMA A156.3 (2008) Exit Devices

2582     ANSI/BHMA A156.4 (2013) Door Controls – Closers

2583     ANSI/BHMA A156.5 (2010) Auxiliary Locks and Associated Products

2584     ANSI/BHMA A156.6 (2010) Architectural Door Trim

2585     ANSI/BHMA A156.7 (2003; R 2009) Template Hinge Dimensions

2586     ANSI/BHMA A156.8 (2010) Door Controls – Overhead Stops and Holders

2587     ANSI/BHMA A156.9 (2010) Cabinet Hardware

2588     BHMA A156.15 (2011) Release Devices Closer Holder, Electromagnetic and Electromechanical

2589     BHMA A156.22 (2012) Door Gasketing and Edge Seal Systems

2590     CALIFORNIA ENERGY COMMISSION (CEC)

2591     CEC Title 24 (2008; Effective Jan 2010) California’s Energy Efficiency Standards for Residential and Nonresidential Buildings

2592     CARPET AND RUG INSTITUTE (CRI)

2593     CRI CIS (2011) Carpet Installation Standard

2594     CAST IRON SOIL PIPE INSTITUTE (CISPI)

2595     CISPI 301 (2009) Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

2596     CISPI 310 (2011) Coupling for Use in Connection with Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

2597     CEILINGS & INTERIOR SYSTEMS CONSTRUCTION ASSOCIATION (CISCA)

2598     CISCA Access Floors (2007) Recommended Test Procedures for Access Floors

2599     CENTERS FOR DISEASE CONTROL AND PREVENTION (CDC)

2600     CDC BMBL (2009) Biosafety in Microbiological and Biomedical Laboratories, 5th Edition

2601     CHEMICAL FABRICS & FILM ASSOCIATION (CFFA)

2602     CFFA-W-101-D (2002) Quality Standard for Vinyl Coated Fabric Wallcovering

2603     CHLORINE INSTITUTE (CI)

2604     CI Pamphlet 1 (2008) Chlorine Basics, Edition 7

2605     CI Pamphlet 6 (2005) Piping Systems for Dry Chlorine, edition 15

2606     COMPOSITE PANEL ASSOCIATION (CPA)

2607     CPA A208.1 (2009) Particleboard

2608     CPA A208.2 (2009) Medium Density Fiberboard (MDF) for Interior Applications

2609     COMPRESSED AIR AND GAS INSTITUTE (CAGI)

2610     CAGI B19.1 (2010) Safety Standard for Compressor Systems

2611     COMPRESSED GAS ASSOCIATION (CGA)

2612     CGA G-10.1 (2008) Commodity Specification for Nitrogen; 7th Edition

2613     CGA G-4.1 (2009) Cleaning Equipment for Oxygen Service; 6th Edition

2614     CGA G-4.4 (2012) Oxygen Pipeline Systems; 4th Edition

2615     CGA G-7 (2008) Compressed Air for Human Respiration; 6th Edition

2616     CGA G-7.1 (2011) Commodity Specification for Air; 5th Edition

2617     CGA HB (1999) Handbook of Compressed Gases; 4th Edition

2618     CGA M-1 (2013) Guide for Medical Gas Supply Systems at Consumer Sites; 2nd Edition

2619     CGA P-1 (2008) Safe Handling of Compressed Gases in Containers; 11th Edition

2620     CGA P-39 (2008) Oxygen-Rich Atmospheres; 2nd Edition

2621     CGA V-5 (2008; R 2013) Diameter-Index Safety System (Non-Interchangeable Low Pressure Connections for Medical Gas Applications); 6th Edition

2622     CONCRETE REINFORCING STEEL INSTITUTE (CRSI) CRSI 10MSP (2009; 28th Ed) Manual of Standard Practice

2623     CONCRETE SAWING AND DRILLING ASSOCIATION (CSDA)

2624     CSDA-W-104 (June 1, 1998; R 2007) Track Mounted Wall Sawing

2625     CONSUMER ELECTRONICS ASSOCIATION (CEA)

2626     CEA 170 (1957) Electrical Performance Standards – Monochrome Television Studio Facilities

2627     CEA-709.1-C (2010) Control Network Protocol Specification

2628     CEA-709.3 (1999; R 2004) Free-Topology Twisted-Pair Channel Specification

2629     CEA-852-B (2010) Tunneling Component Network Protocols Over Internet Protocol Channels

2630     CONSUMER PRODUCT SAFETY COMMISSION (CPSC) CPSC Pub No 325 (2010) Handbook for Public Playground Safety

2631     CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION (CEMA)

2632     CEMA B105.1 (2009) Welded Steel Conveyor Pulleys with Compression Type Hubs

2633     CEMA Belt Book (2007) Belt Conveyors for Bulk Materials

2634     COOLING TECHNOLOGY INSTITUTE (CTI)

2635     CTI ATC-105 (2000) Acceptance Test Code

2636     CTI ESG-114 (2007) Design of Cooling Towers with Douglas Fir Lumber

2637     CTI STD-111 (2009) Gear Speed Reducers

2638     CTI STD-134 (2007) Plywood for Use in Cooling Towers

2639     CTI Std-103 (2007) Redwood Lumber Specifications

2640     CTI Std-112 (2009) Pressure Preservative Treatment of Lumber

2641     CTI Std-137 (2013) Fiberglass Pultruded Structural Products for Use in Cooling Towers

2642     CTI Std-201 (2011) Standard for the Certification of Water Cooling Tower Thermal Performance

2643     COPPER DEVELOPMENT ASSOCIATION (CDA)

2644     CDA A4015 (2010) Copper Tube Handbook

2645     CDA A4050 Copper in Architecture – Design Handbook

2646     CRANE MANUFACTURERS ASSOCIATION OF AMERICA (CMAA)

2647     CMAA 70 (2010) Specification for Top Running Bridge and Gantry Type Multiple Girder Electric Overhead Traveling Cranes, No. 70

2648     CMAA 74 (2010) Specifications for Top Running and Under Running Single Girder Electric Overhead Cranes Utilizing Under Running Trolley Hoist, No. 74

2649     CSA AMERICA, INC (CSA/AM)

2650     CSA/AM CSA/ANSI LC 1 (2005; Addenda 1B 2011) Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)

2651     CSA STANDARDS (CSA)

2652     CGA 3.11-M88 (1988; R 2009) Lever Operated Pressure Lubricated Plug Type Gas Shut-Off Valves

2653     CGA 3.16-M88 (1988; R 2009) Lever Operated Non-Lubricated Gas Shut-Off Valves

2654     CGA 9.2-M88 (1988; R 2009) Manually Operated Shut-Off Valves for Gas Piping Systems

2655     CSA A23.4 (2009; Update 2010) Precast Concrete – Materials and Construction

2656     CSA C22.2 No. 109 (1981; R 2013) Commercial Cooking Appliances

2657     CSA Directory (updated continuously online) Product Index

2658     DISTRICT OF COLUMBIA MUNICIPAL REGULATIONS (DCMR) 20 DCMR (1997) Environment – Chapters 40 to 70, Subtitle E:

2659     20 DCMR (1997) Environment – Chapters 40 to 70, Subtitle E: Hazardous Waste, Chapters 40 – 70 DOOR AND ACCESS SYSTEM MANUFACTURERS ASSOCIATION (DASMA)

2660     DOOR AND ACCESS SYSTEM MANUFACTURERS ASSOCIATION (DASMA)

2661     ANSI/DASMA 102 (2011) Specifications for Sectional Overhead-Type Doors

2662     ANSI/DASMA 108 (2005) Standard Method for Testing Sectional Garage Doors and Rolling Doors: Determination of Structural Performance Under Uniform Static Air Pressure Difference

2663     DUCTILE IRON PIPE RESEARCH ASSOCIATION (DIPRA)

2664     DIPRA TRD (2006) Thrust Restraint Design for Ductile Iron Pipe

2665     ELECTRICAL GENERATING SYSTEMS ASSOCIATION (EGSA)

2666     EGSA 101P (1995) Performance Standard for Engine Driven Generator Sets

2667     ELECTRONIC COMPONENTS ASSOCIATION (ECA)

2668     ECA EIA/ECA 310 (2005) Cabinets, Racks, Panels, and Associated Equipment

2669     ELECTRONIC INDUSTRIES ALLIANCE (EIA)

2670     ANSI/TIA-455-80C (2003) FOTP-80 – IEC 60793-1-144 Optical fibres Part 1-44: Measurement Methods and Test Procedures

2671     EIA 416 (1974; R 1981) Filters for Radio Interference

2672     EIA 443 (1979) NARM Standard for Solid State Relays Service

2673     EIA 480 (1981) Toggle Switches

2674     EIA/IS 46 (1987) Test Procedure for Resistance to Soldering (Vapor Phase Technique) for Surface Mount Devices

2675     TIA/EIA 455-41-A (1993a; R 2001) FOTP-41 – Compressive Loading Resistance of Fiber Optic Cables

2676     ELECTROSTATIC DISCHARGE ASSOCIATION (ESD)

2677     ESD S6.1 (2009) Grounding

2678     ESD S7.1 (2012) Resistive Characterization of Floor Materials

2679     ENERGY INSTITUTE (EI)

2680     EI 1529 (2005; 6th Ed) Aviation Fueling Hose and Hose Assemblies

2681     EI 1581 (2011) Specifications and Qualification Procedures for Aviation Jet Fuel Filter/Separators

2682     EI 1584 (2001; Addenda 2007; 3rd Ed) Four-Inch Hydrant System Components and Arrangements (Hydrant Pit

2683     ETL TESTING LABORATORIES (ETL)

2684     ETL DLP (updated continuously) Directory of ETL Listed Products

2685     EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN/CENELEC)

2686     CENELEC EN 60529 (1991; A1 2000; A2 2013) Degrees of Protection Provided By Enclosures (IP Code)

2687     EN 60309-1 (1999; A1 2007; A2 2012) Plugs, Socket-Outlets and Couplers for Industrial Purposes Part 1: General

2688     EN 60309-2 (1999; A1 2004; A11 2007; A2 2012) Plugs, Socket-Outlets and Couplers for Industrial Purposes Part 2: Dimensional Interchangeability Requirements for Pin and Contact-Tube Accessories EXPANSION JOINT MANUFACTURERS ASSOCIATION (EJMA)

2689     EXPANSION JOINT MANUFACTURERS ASSOCIATION (EJMA)

2690     EJMA Stds (2011) EJMA Standards

2691     FLUID CONTROLS INSTITUTE (FCI)

2692     FCI 70-2 (2013) Control Valve Seat Leakage

2693     FLUID SEALING ASSOCIATION (FSA)

2694     FSA-0017 (1995e6) Standard for Non-Metallic Expansion Joints and Flexible Pipe Connectors Technical Handbook

2695     FM GLOBAL (FM)

2696     FM 4435 (2013) Roof Perimeter Flashing

2697     FM 4470 (2010) Single-Ply, Polymer-Modified Bitumen Sheet, Built-up Roof (BUR), and Liquid Applied Roof Assemblies for Use in Class 1 and Noncombustible Roof Deck Construction

2698     FM 4471 (2010) Class I Panel Roofs

2699     FM 4991 (2013) Approval of Firestop Contractors

2700     FM APP GUIDE (updated on-line) Approval Guide http://www.approvalguide.com/

2701     FM DS 1-28 (2002) Design Wind Loads

2702     FM DS 12-17 (2001) Watertube Boilers

2703     FM P9513 (2002) Specialist Data Book Set for Roofing Contractors; contains 1-22 (2001), 1-28 (2002), 1-29 (2002), 1-28R/1-29R (1998), 1-30 (2000), 1-31 (2000), 1-32 (2000), 1-33 (2000), 1-34 (2001), 1-49

2704     (2000), 1-52 (2000), 1-54 (2001)

2705     FOREST STEWARDSHIP COUNCIL (FSC)

2706     FSC STD 01 001 (2000) Principles and Criteria for Forest Stewardship

2707     FORESTRY SUPPLIERS INC. (FSUP)

2708     FSUP 77341 (1999) Munsell (R) Soil Color Charts

2709     FOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH (FCCCHR)

2710     FCCCHR List (continuously updated) List of Approved Backflow Prevention Assemblies

2711     FCCCHR Manual (10th Edition) Manual of Cross-Connection Control

2712     GEOLOGICAL SOCIETY OF AMERICA (GeoSA)

2713     GSA RCC00100R (2009) Geological Rock Color Chart (Munsell)

2714     GEOSYNTHETIC INSTITUTE (GSI)

2715     GSI GRI GG4a (2012) Determination of the Long-Term Design Strength of Stiff Geogrids

2716     GSI GRI GG4b (2012) Determination of the Long-Term Design Strength of Flexible Geogrids

2717     GSI GRI GG6 (1996) Grip Types for Use in Wide Width Testing of Geotextiles and Geogrids

2718     GSI GRI GM7 (1995) Accelerated Curing of Geomembrane Test Strip Seams Made by Chemical Fusion Methods

2719     GSI GRI GM9 (1995) Cold Weather Seaming of Geomembranes

2720     GLASS ASSOCIATION OF NORTH AMERICA (GANA)

2721     GANA Glazing Manual (2004) Glazing Manual

2722     GANA Laminate Manual (2009) Laminated Glazing Reference Manual

2723     GANA Sealant Manual (2008) Sealant Manual

2724     GANA Standards Manual (2001) Tempering Division’s Engineering Standards Manual

2725     GREEN BUILDING INITIATIVE (GBI)

2726     GBI/ANSI 01 (2010 Green Building Assessment Protocol for Commercial Buildings Green Globes (2004) Green Globes(tm) US Green Building Rating System

2727     GREEN SEAL (GS)

2728     GS-12 (1997) Occupancy Sensors

2729     GS-36 (2011) Commercial Adhesives

2730     GS-37 (2012) Cleaning Products for Industrial and Institutional Use GYPSUM ASSOCIATION (GA) GA 214 (2010) Recommended Levels of Gypsum Board Finish

2731     GA 214 (2010) Recommended Levels of Gypsum Board Finish

2732     GA 216 (2010) Application and Finishing of Gypsum Panel Products

2733     GA 224 (2008) Installation of Predecorated Gypsum Board

2734     GA 253 (2012) Application of Gypsum Sheathing

2735     GA 600 (2009) Fire Resistance Design Manual

2736     H.P. WHITE LABORATORY (HPW)

2737     HPW TP-0500.03 (2003) Transparent Materials for use in Forced Entry or Containment Barriers

2738     HARDWOOD PLYWOOD AND VENEER ASSOCIATION (HPVA)

2739     HPVA EF (2012) American National Standard for Engineered Wood Flooring

2740     HPVA HP-1 (2009) American National Standard for Hardwood and Decorative Plywood HEAT EXCHANGE INSTITUTE (HEI)

2741     HEAT EXCHANGE INSTITUTE (HEI)

2742     HEI 2622 (2009) Standards for Closed Feedwater Heaters; 8th Edition

2743     HEI 2623 (2004) Standards for Power Plant Heat Exchangers

2744     HYDRAULIC INSTITUTE (HI)

2745     HI 1.1-1.2 (2008) Rotodynamic (Centrifugal) Pump for Nomenclature and Definitions

2746     HI 1.3 (2009) Rotodynamic (Centrifugal) Pump Applications

2747     HI 2.3 (2008) Rotodynamic (Vertical) Applications

2748     HI 2.4 (2008) Rotodynamic (Vertical) Operations

2749     HI 2.6 (2000) Vertical Pump Tests

2750     HI 3.1-3.5 (2008) Rotary Pumps

2751     HI 7.1-7.5 (2006) Controlled Volume Metering Pumps

2752     HI 9.1-9.5 (2000) Pumps – General Guidelines for Types, Applications, Definitions, Sound Measurements and Documentation

2753     HI 9.6.4 (2009) Rotodynamic Pumps for Vibration Analysis and Allowable Values

2754     HI M100 (2009) HI Pump Standards Set

2755     HYDRONICS INSTITUTE DIVISION OF GAMA (HYI)

2756     HI 004 (1995) Radiant Floor Heating HYI-005 (2008) I=B=R Ratings for Boilers, Baseboard Radiation and Finned Tube (Commercial)

2757     ICC EVALUATION SERVICE, INC. (ICC-ES)

2758     ICC ES AC125 (2007; R 2009; R 2010; R 2012) Acceptance Criteria for Concrete and Reinforced and Unreinforced Masonry Strengthening Using Fiber-Reinforced Polymer (FRP) Composite Systems

2759     ICC ES AC178 (2003; R 2008) Acceptance Criteria for Inspection and Verification of Concrete and Reinforced and

2760     ICC-ES AC04 (2012) Acceptance Criteria for Sandwich Panels

2761     ICC-ES AC23 (2004; R 2008; R 2011) Acceptance Criteria for Spray-Applied and Intumescent Mastic Coating Fire-Protection Materials

2762     ICC-ES AC300 (2010) Acceptance Criteria for Access Floors

2763     ICC-ES AC48 (2012) Acceptance Criteria for Roof Underlayment for Use in Severe Climate Areas ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IES)

2764     IES HB-10 (2011) IES Lighting Handbook

2765     IES LM-48 (2001) Guide for Testing the Calibration of Locking-Type Photoelectric Control Devices Used in Outdoor Applications

2766     IES LM-79 (2008) Electrical and Photometric Measurements of Solid-State Lighting Products

2767     IES LM-80 (2008) Measuring Lumen Maintenance of LED Light Sources

2768     IES RP-16 (2010; Addendum A 2008; Addenda B & C 2009) Nomenclature and Definitions for Illuminating Engineering

2769     IES RP-8 (2000; Errata 2004; R 2005; Errata 2007) Roadway Lighting

2770     IES TM-15 (2011) Luminaire Classification System for Outdoor Luminaires

2771     IES TM-21 (2011) Projecting Long Term Lumen Maintenance of

2772     LED Light Sources

2773     INDUSTRIAL FASTENERS INSTITUTE (IFI)

2774     IFI 100/107 (2002) Prevailing Torque-Type Steel Hex and Hex Flange Nuts Regular and Light Hex Series INSTITUTE OF CLEAN AIR COMPANIES (ICAC)

2775     ICAC EP-1 (2000) Terminology for Electrostatic Precipitators

2776     ICAC EP-10W (2008) Bid Specification Information Requirements and Bid Evaluation Form for Electrostatic Precipitators

2777     ICAC EP-6 (1968) Pilot Electrostatic Precipitators

2778     ICAC EP-7 (2004) Electrostatic Precipitator Gas Flow Model Studies

2779     ICAC EP-8 (1993) Structural Design Criteria for Electrostatic Precipitator Casings

2780     ICAC F-2 (1972) Fundamentals of Fabric Collectors and Glossary of Terms

2781     ICAC F-3 (2002) Operation and Maintenance of Fabric Filters

2782     ICAC F-5 (1991) Types of Fabric Filters

2783     ICAC FGD-1 (1982) Flue Gas Desulfurization Terminology

2784     ICAC G-1 (1968; R 1972) Gaseous Emissions Equipment: Product Definitions and Illustrations

2785     ICAC M-2 (1969) Cyclonic Mechanical Dust Collector Criteria

2786     ICAC M-4 (1973) Information Required for the Preparation of Bidding Specifications for Large Diameter Cyclones and Tubular Centrifugal Collectors

2787     ICAC M-5 (1975) Standardized Method of Particle Size Determination and Collection Efficiency

2788     ICAC M-6 (1981) Simplified Method of Efficiency Calculations from Fractional Efficiency Curves

2789     ICAC WS-1 (1975) Wet Scrubber Terminology

2790     ICAC WS-3 (1976; R 1980) Basic Types of Wet Scrubbers

2791     ICAC WS-4 (1975) Wet Scrubber System-Major Auxiliaries INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)

2792     INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)

2793     IEEE 1 (2000; R 2005) General Principles for Temperature Limits in the Rating of Electric Equipment and for the Evaluation of Electrical Insulation

2794     IEEE 100 (2000; Archived) The Authoritative Dictionary of

2795     IEEE Standards Terms IEEE 1100 (2005) Emerald Book IEEE Recommended Practice for Powering and Grounding Electronic Equipment

2796     IEEE 1100 (2005) Emerald Book IEEE Recommended Practice for Powering and Grounding Electronic Equipment

2797     IEEE 112 (2004) Standard Test Procedure for Polyphase Induction Motors and Generators

2798     IEEE 114 (2001) Test Procedure for Single-Phase Induction Motors

2799     IEEE 115 (2009) Guide for Test Procedures for Synchronous Machines: Part I Acceptance and Performance Testing; Part II Test Procedures and Parameter Determination for Dynamic Analysis

2800     IEEE 1159 (2009) Recommended Practice on Monitoring Electric Power Quality

2801     IEEE 120 (1989; R 2007) Master Test Guide for Electrical Measurements in Power Circuits

2802     IEEE 142 (2007) Recommended Practice for Grounding of Industrial and Commercial Power Systems – IEEE Green Book

2803     IEEE 18 (2012) Standard for Shunt Power Capacitors IEEE 1815 (2012) Electric Power Systems

2804     IEEE 1815 (2012) Electric Power Systems Communications-Distributed Network Protocol (DNP3)

2805     IEEE 242 (2001; Errata 2003) Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems – Buff Book

2806     IEEE 299 (2006) Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures

2807     IEEE 32 (1972; R 1997) Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices

2808     IEEE 383 (2003; R 2008) Standard for Qualifying Class 1E Electric Cables and, Field Splices for Nuclear Power Generating Stations 2004

2809     IEEE 386 (2006; INT 1 2011) Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600V

2810     IEEE 399 (1997) Brown Book IEEE Recommended Practice for Power Systems Analysis

2811     IEEE 4 (2013) Standard Techniques for High Voltage Testing IEEE 400.2 (2013) Guide for Field Testing of Shielded Power

2812     IEEE 400.2 (2013) Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)

2813     IEEE 404 (2012) Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V to 500,000 V

2814     IEEE 43 (2000; R 2006) Recommended Practice for Testing Insulation Resistance of Rotating Machinery

2815     IEEE 450 (2010) Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications

2816     IEEE 48 (2009) Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV

2817     IEEE 484 (2002; R 2008) Recommended Practice for Installation Design and Implementation of Vented Lead-Acid Batteries for Stationary Applications

2818     IEEE 485 (2010) Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications

2819     IEEE 515 (2011) Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications

2820     IEEE 519 (1992; R 1993; Errata 2004) Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems

2821     IEEE 525 (2007) Guide for the Design and Installation of Cable Systems in Substations

2822     IEEE 602 (2007) Recommended Practice for Electric Systems in Health Care Facilities – White Book

2823     IEEE 62 (1995; R 2005) Guide for Diagnostic Field Testing of Electric Power Apparatus-Part 1: Oil Filled Power Transformers, Regulators, and Reactors

2824     IEEE 754 (2008) Floating-Point Arithmetic – IEEE Computer Society

2825     IEEE 80 (2000; INT 1 2002; Errata 2007) Guide for Safety in AC Substation Grounding

2826     IEEE 802.11 (2012; AA 2012; AE 2012; AD 2012; AC 2013; AF 2013) Information technology-Telecommunications and Information Exchange Between Systems Local and Metropolitan Area Networks-Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications

2827     IEEE 802.3 (2012; Errata 2013; ADD BK 2013) Standard Information Technology–Telecommunications and Information Exchange Between Systems–Specific Requirements Part 3: CSMA/CD Access Method and Physical Layer Specifications

2828     IEEE 81 (2012) Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a

2829     IEEE 85 (1973; R 1986) Test Procedure for Airborne Sound Measurements on Rotating Electric Machinery

2830     IEEE C12.16 (1991) Solid-State Electricity Meters IEEE C135.1 (1999) Standard for Zinc-Coated Steel Bolts and

2831     IEEE C135.1 (1999) Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction

2832     IEEE C135.2 (1999) Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods and Nuts for Overhead Line Construction

2833     IEEE C135.22 (1988) Standard for Zinc-Coated Ferrous Pole-Top Insulator Pins with Lead Threads for Overhead Line Construction

2834     IEEE C135.30 (1988) Standard for Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction

2835     IEEE C2 (2012; Errata 2012; INT 1-4 2012; INT 5-7 2013) National Electrical Safety Code

2836     IEEE C37.04 (1999; R 2006; AMD 1 2003; R 2006; ERTA 2005; R 2006; AMD 2 2008; CORR 2009; INT 2010) Standard for Rating Structure for AC High-Voltage Circuit Breakers

2837     IEEE C37.06 (2009) Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis – Preferred Ratings and Related Required Capabilities for Voltage Above 1000 V

2838     IEEE C37.081 (1981; Supp 1997; R 2007) Guide for Synthetic Fault Testing of AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

2839     IEEE C37.09 (1999; AMD 1 2005; Corr 1 2007; R 2007; Errata 2007; Amendment B 2011) Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis

2840     IEEE C37.1 (2007) Standard for Supervisory Control, Data Acquisition (SCADA) and Automatic Systems

2841     IEEE C37.121 (2012) American National Standard for Switchgear-Unit Substations – Requirements

2842     IEEE C37.13 (2008; INT 1 2009; AMD 1 2012) Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures

2843     IEEE C37.16 (2009) Standard for Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below) and DC 3200 V and below) Power Circuit Breakers

2844     IEEE C37.17 (2012) Standard for Trip Devices for AC and General-Purpose DC Low-Voltage Power Circuit Breakers

2845     IEEE C37.2 (2008) Standard for Electrical Power System Device Function Numbers, Acronyms and Contact Designations

2846     IEEE C37.20.1 (2002; INT 1 2005; AMD A 2005; AMD B 2006; R 2007) Standard for Metal-Enclosed Low-Voltage Power Circuit-Breaker Switchgear

2847     IEEE C37.20.2 (1999; Corr 2000; R 2005) Standard for Metal-Clad Switchgear

2848     IEEE C37.20.3 (2013) Standard for Metal-Enclosed Interrupter Switchgear

2849     IEEE C37.23 (2003; R 2008) Standard for Metal-Enclosed Bus IEEE C37.30 (1997; INT 1 2011) Standard Requirements for

2850     IEEE C37.30 (1997; INT 1 2011) Standard Requirements for High-Voltage Switches

2851     IEEE C37.32 (2002) Standard for High-Voltage Switches, Bus Supports, and Accessories – Schedules of Preferred Ratings, Construction Guidelines and Specifications

2852     IEEE C37.34 (1994) Standard Test Code for High-Voltage Air Switches

2853     IEEE C37.40 (2003; Errata 2003; R 2009) Service Conditions & Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, & Accessories

2854     IEEE C37.41 (2008; Errata 2009) Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories Used with These Devices

2855     IEEE C37.42 (2009) Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices

2856     IEEE C37.46 (2010) Standard for High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches

2857     IEEE C37.47 (2011) Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches

2858     IEEE C37.60 (2012) Standard Requirements for Overhead, Pad Mounted, Dry Vault and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV

2859     IEEE C37.63 (2013) Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems

2860     IEEE C37.71 (2001) Standard Three-Phase, Manually Operated Subsurface or Vault Load-Interrupting Switches for Alternating-Current Systems

2861     IEEE C37.74 (2003; Int 1 2004) Standard Requirements for Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV

2862     IEEE C37.90 (2005) Standard for Relays and Relay Systems Associated With Electric Power Apparatus

2863     IEEE C37.90.1 (2012) Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

2864     IEEE C37.96 (2012) Guide for AC Motor Protection IEEE C50.12 (2005; R 2010) Standard for Salient Pole 50 HZ and

2865     IEEE C50.12 (2005; R 2010) Standard for Salient Pole 50 HZ and 60 Hz Synchronous Generators and Generation/Motors for Hydraulic Turbine Applications Rated 5 MVA and above

2866     IEEE C57.110 (2008) Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents

2867     IEEE C57.12.00 (2010) Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers

2868     IEEE C57.12.01 (2005) General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin-Encapsulated Windings

2869     IEEE C57.12.10 WARNING: Text in tags exceeds the maximum length of 300 characters

2870     IEEE C57.12.20 (2011) Standard for Overhead Type Distribution Transformers, 500 KVA and Smaller: High Voltage 34 500 Volts and Below: Low Voltage, 7970/13,800 Y Volts and Below

2871     IEEE C57.12.25 (1990) Standard for Transformers – Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers With Separable Insulated High-Voltage Connectors; High Voltage, 34,500 Grdy/ 19,920 Volts and Below; Low Voltage, 240/120 Volts; 167 kVa and Smaller Requirements

2872     IEEE C57.12.28 (2005; INT 3 2011) Standard for Pad-Mounted Equipment – Enclosure Integrity

2873     IEEE C57.12.29 (2005) Standard for Pad-Mounted Equipment – Enclosure Integrity for Coastal Environments

2874     IEEE C57.12.34 (2009) Standard for Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage and Below

2875     IEEE C57.12.50 (1981; R 1998) Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 to 500 kVA, Three-Phase, with High-Volt 601 to 34,500 Volts

2876     IEEE C57.12.51 (2008) Standard for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34,500 Volts, Low-voltage 208Y/120 to 4160 Volts – General Requirement

2877     IEEE C57.12.70 (2011) Standard Terminal Markings and Connections for Distribution and Power Transformers

2878     IEEE C57.12.80 (2010) Standard Terminology for Power and Distribution Transformers

2879     IEEE C57.12.90 (2010) Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

2880     IEEE C57.12.91 (2011) Standard Test Code for Dry-Type Distribution and Power Transformers

2881     IEEE C57.124 (1991; R 2002) Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type Transformers

2882     IEEE C57.13 (2008; INT 2009) Standard Requirements for Instrument Transformers

2883     IEEE C57.13.1 (2006) Guide for Field Testing of Relaying Current Transformers

2884     IEEE C57.15 (2009) Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators

2885     IEEE C57.19.00 (2009; INT 1 2009; Errata 2010) Standard General Requirements and Test Procedures for Outdoor Power Apparatus Bushings

2886     IEEE C57.19.01 (2000; R 2005; INT 1 2010) Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings

2887     IEEE C57.93 (2007) Guide for Installation and Maintenance of Liquid-Immersed Power Transformers

2888     IEEE C57.96 (2013) Guide for Loading Dry-Type Distribution and Power Transformers

2889     IEEE C57.98 (2011) Guide for Transformer Impulse Tests

2890     IEEE C62.11 (2012) Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits (>1kV)

2891     IEEE C62.33 (1982; R 2000) Standard for Test Specifications for Varistor Surge-Protective Devices

2892     IEEE C62.41 (1991; R 1995) Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits

2893     IEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power Circuits

2894     IEEE C62.41.2 (2002) Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits

2895     IEEE C62.45 (2002; R 2008) Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000v and less)AC Power Circuits

2896     IEEE C63.2 (2009) Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz – Specifications

2897     IEEE C63.4 (2009) American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

2898     IEEE Stds Dictionary (2009) IEEE Standards Dictionary: Glossary of Terms & Definitions

2899     INSTITUTE OF ENVIRONMENTAL SCIENCES AND TECHNOLOGY (IEST)

2900     IEST RP-CC-001 (2009) HEPA and ULPA Filters

2901     IEST RP-CC-008 (2007; Rev 2) Gas-Phase Adsorber Cells

2902     IEST-STD-CC1246 (2013; Rev E) Product Cleanliness Levels and Contamination Control Program

2903     INSTITUTE OF INSPECTION, CLEANING, AND RESTORATION CERTIFICATION (IICRC)

2904     IICRC S100 (2002) Standard Reference Guide for Professional Carpet Cleaning

2905     IICRC S500 (2006) Standard and Reference Guide for Professional Water Damage Restoration

2906     INSTITUTE OF TRANSPORTATION ENGINEERS (ITE) ITE ATC (2006; v5.2b) Advanced Transportation Controller

2907     ITE ATC (2006; v5.2b) Advanced Transportation Controller (ATC) Standard

2908     INSTRUCTIONS AND STANDARDS FOR NAVBASE GUANTANAMO BAY CUBA (COMNAVBASEGTMOINST)

2909     11300.3 Base Energy Conservation Regulations

2910     1710.10 Outdoor Recreational and Wildlife Instruction

2911     4400.2A Consolidated Hazardous Material Reutilization and Inventory Management Program

2912     5090.1 Hazardous Waste Management Plan

2913     5090.4 Standard Operating Procedures for Landfill

2914     5090.7 Pollution Control Procedures for Oil and Hazardous Substances

2915     5090.8 Asbestos Program Management

2916     5100.13 Hazardous Material/Excess Hazardous Material Control and Safety Program

2917     FGS (1994) Final Governing Standards for Environmental Protection by U.S. Forces in Cuba

2918     INSULATED CABLE ENGINEERS ASSOCIATION (ICEA)

2919     ICEA S-83-596 (2011) Indoor Optical Fiber Cables

2920     ICEA S-87-640 (2011) Optical Fiber Outside Plant Communications Cable; 4th Edition

2921     ICEA S-90-661 (2012) Category 3, 5, & 5e Individually Unshielded Twisted Pair Indoor Cables for Use in General Purpose and LAN Communications Wiring Systems Technical Requirements

2922     ICEA S-94-649 (2013) Standard for Concentric Neutral Cables Rated 5 Through 46 KV

2923     ICEA S-98-688 (2012) Broadband Twisted Pair Telecommunication Cable, Aircore, Polyolefin Insulated, Copper Conductors Technical Requirements

2924     ICEA S-99-689 (2012) Broadband Twisted Pair Telecommunication Cable Filled, Polyolefin Insulated, Copper Conductors Technical Requirements

2925     INSULATING GLASS MANUFACTURERS ALLIANCE (IGMA)

2926     IGMA TB-3001 (2001) Guidelines for Sloped Glazing

2927     IGMA TM-3000 (1990; R 2004) North American Glazing Guidelines for Sealed Insulating Glass Units for Commercial & Residential Use

2928     IGMA TR-1200 (1983; R 2007) Guidelines for Commercial Insulating Glass Dimensional Tolerances

2929     INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA)

2930     IATA DGR (2013) Dangerous Goods Regulations

2931     INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS (IAPMO)

2932     IAPMO PS 117 (2005b) Press Type Or Plain End Rub Gasketed W/ Nail CU & CU Alloy Fittings 4 Install On CU Tubing

2933     IAPMO UPC (2003) Uniform Plumbing Code

2934     IAPMO Z124.1.2 (2005) Plastic Bathtub and Shower Units

2935     IAPMO Z124.3 (2005) Plastic Lavatories

2936     IAPMO Z124.5 (2013) Plastic Toilet (Water Closet) Seats

2937     IAPMO Z124.6 (2007) Plastic Sinks

2938     IAPMO Z124.8 (1990) Plastic Bathtub Liners

2939     INTERNATIONAL CODE COUNCIL (ICC)

2940     ICC A117.1 (2009) Accessible and Usable Buildings and Facilities

2941     ICC IBC (2012) International Building Code

2942     ICC IFC (2012) International Fire Code

2943     ICC IFGC (2012) International Fuel Gas Code

2944     ICC IMC (2012) International Mechanical Code

2945     ICC IPC (2012) International Plumbing Code

2946     ICC PCBF (2012) INTERNATIONAL CODE COUNCIL PERFORMANCE CODE® For buildings and facilities

2947     ICC UBC (1997; Erratas Vol 1, 2 & 3 01/2001; Vol 1 & 2 03/2001; Vol 2 10/2001) Uniform Building Code

2948     ICC UMC (1997; Errata 2 & 3 1997) Uniform Mechanical Code

2949     ICC/ANSI A117.1 (2009) Accessible and Usable Buildings and Facilities

2950     INTERNATIONAL CONCRETE REPAIR INSTITUTE (ICRI)

2951     ICRI 03732 (1997) Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, and Polymer Overlays

2952     INTERNATIONAL ELECTRICAL TESTING ASSOCIATION (NETA)

2953     NETA ATS (2013) Standard for Acceptance Testing Specifications for Electrical Power Equipment and Systems

2954     NETA MAINT (2011) Standard for Maintenance Testing Specifications for Electric Power Distribution Equipment and Systems

2955     INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)

2956     IEC 60034-1 (2010) Rotating Electrical Machines – Part 1: Rating and Performance IEC 60034-14 (2007) Rotating Electrical Machines – Part 14:

2957     IEC 60034-14 (2007) Rotating Electrical Machines – Part 14: Mechanical Vibration of Certain Machines with Shaft Heights 56 mm and Higher – Measurement, Evaluation and Limits of Vibration Severity

2958     IEC 60034-2A (1974; ED 1.0) Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) Measurement of Losses by the Calorimetric Method

2959     IEC 60034-5 (2006) Rotating Electrical Machines – Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) – Classification

2960     IEC 60034-6 (1991) Rotating Electrical Machines Part 6: Methods of Cooling (IC Code)

2961     IEC 60068-2-27 (2008; ED 4.0) Environmental Testing – Part 2-27: Tests – Test Ea and Guidance: Shock

2962     IEC 60068-2-30 (2005; ED 3.0) Environmental Testing – Part 2-30: Tests – Test Db: Damp Heat, Cyclic (12 H + 12 H Cycle)

2963     IEC 60204-1 (2009) Safety of Machinery – Electrical Equipment of Machines – Part 1: General Requirements

2964     IEC 60255-21-3 (1993; ED 1.0) Electrical Relays – Part 21: Vibration, Shock, Bump And Seismic Tests On Measuring Relays And Protection Equipment – Section 3: Seismic Tests

2965     IEC 60265-1 (1998; Corrigendum 2000) High Voltage Switches – Part 1: Switches for Rated Voltages Above 1 kV and Less Than 52 kV

2966     IEC 60268-16 (2003; ED 4.0) Sound System Equipment – Part 16: Objective Rating Of Speech Intelligibility By Speech Transmission Index

2967     IEC 60269-1 (2009) Low-Voltage Fuses – Part 1: General Requirements

2968     IEC 60269-2 (2013) Low-Voltage Fuses – Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application) – Examples of Standardized Systems of Fuses A to K

2969     IEC 60309-3 Pin and Sleeve Devices

2970     IEC 60364-1 (2005) Low-voltage Electrical Installations in Buildings – Part 1: Fundamental Principles, Assessment of General Characteristics, Definitions

2971     IEC 60364-5 (2009) Low-Voltage Electrical Installations – Part 5-52: Selection and Erection of Electrical Equipment – Wiring Systems

2972     IEC 60687 (1992) Alternating Current Static Watt-Hour Meters for Active Energy (Classes 0,2 S and 0,5 S)

2973     IEC 60947-1 (2011) Low-Voltage Switchgear and Controlgear – Part 1: General Rules

2974     IEC 60947-2 (2013) Low-Voltage Switchgear and Controlgear – Part 2: Circuit-Breakers

2975     IEC 60947-3 (2012; AMD 1; CORR 1) Low-Voltage Switchgear and Controlgear – Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination Units

2976     IEC 60947-4-1 (2012; ED 3.1) Low-voltage Switchgear and Controlgear, Part 4-1: Contactors and Motor Starters – Electromechanical Contactor and Motor Starters

2977     IEC 61000-4-5 (2005; ED 2.0; CORR 2009) Electromagnetic Compatibility (EMC) – Part 4-5: Testing and Measurement Techniques – Surge Immunity Test

2978     IEC 61099 (2010; ED 2.0) Insulating Liquids – Specifications for Unused Synthetic Organic Esters for Electrical Purposes

2979     IEC 61131-3 (2013) Programmable Controllers – Part 3: Programming Languages

2980     IEC 62053-22 (2003; ED 1.0) Electricity Metering Equipment (a.c.) – Particular Requirements – Part 22: Static Meters for Active Energy (Classes 0,2 S and 0,5 S)

2981     IEC 62271-111 (2012; ED 2.0) High Voltage Switchgear And Controlgear – Part 111: Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems up to 38 kV

2982     INTERNATIONAL GROUND SOURCE HEAT PUMP ASSOCIATION (IGSHPA)

2983     IGSHPA 21010 (1991) Grouting Procedures for Ground-Source Heat Pump Systems

2984     IGSHPA 21015 (2000) Grouting for Vertical GHP Systems

2985     IGSHPA 21020 (1988) Closed-Loop/Ground-Source Heat Pump System/Installation Guide

2986     IGSHPA 21030 (2005) Design and Installation Standards

2987     IGSHPA 21060 (1989) Soil and Rock Classification Field Manual

2988     INTERNATIONAL INSTITUTE OF AMMONIA REFRIGERATION (IIAR) IIAR 2 (2008; ADD A 2010) American National Standard for Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems

2989     INTERNATIONAL MUNICIPAL SIGNAL ASSOCIATION (IMSA) IMSA 32 (1997) Copper-Covered Steel Messenger Strand, 30 Percent or 40 Percent Conductivity

2990     INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)

2991     ANSI ISO/IEC 7816 (R 2009) Identification Cards – Integrated Circuit Cards

2992     ISO 10763 (1994) Hydraulic Fluid Power – Plain-end, Seamless and Welded Precision Steel Tubes – Dimensions and Nominal Working Pressures

2993     ISO 11143 (2008) Dentistry – Amalgam Separators

2994     ISO 11171 (2010) Hydraulic Fluid Power – Calibration of Automatic Particle Counters for Liquids

2995     ISO 11727 (1999) Pneumatic Fluid Power – Identification of Ports and Control Mechanisms of Control Valves and Other Components

2996     ISO 1219-1 (2012) Fluid Power Systems and Components Graphic Symbols and Circuit Diagrams – Part 1: Graphic Symbols for Conventional Use and Data-Processing Applications

2997     ISO 1219-2 (2012) Fluid Power Systems and Components Graphic Symbols and Circuit Diagrams – Part 2: Circuit Diagrams

2998     ISO 13256-1 (1998) Water-Source Heat Pumps – Testing and Rating for Performance – Part 1: Water-to-Air and Brine-to-Air Heat Pumps

2999     ISO 13256-2 (1998) Water-Source Heat Pumps – Testing and Rating for Performance – Part 2: Water-to-Water and Brine-to-Water Heat Pumps

3000     ISO 14040 (2006) Environmental Management – Life Cycle Assessment – Principles and Framework

3001     ISO 14644-1 (1999) Cleanrooms and Associated Controlled Environments Part 1: Classification of Air Cleanliness

3002     ISO 14644-2 (2000) Cleanrooms and Associated Controlled Environments Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1

3003     ISO 16889 (2008) Hydraulic Fluid Power – Multi-Pass Method for Evaluating Filtration Performance of a Filter Element

3004     ISO 17357-1 (2014) Ships and Marine Technology – Floating Pneumatic Rubber Fenders – Part 1: High Pressure

3005     ISO 1940-1 (2003; Cor 2005) Mechanical Vibration – Balance Quality Requirements for Rotors in a Constant (Rigid) State – Part 1: Specification and Verification of Balance

3006     ISO 2151 (2004) Acoustics – Noise Test Code for Compressors and Vacuum Pumps – Engineering Method (Grade 2)

3007     ISO 228-1 (2000) Pipe Threads Where Pressure-Tight Joints Are Not Made on The Threads – Part 1: Dimensions, Tolerances and Designation

3008     ISO 2551 (1981) Machine-made Textile Floor Coverings – Determination of Dimensional Changes Due to the Effects of Varied Water and Heat Conditions

3009     ISO 261 (1998) ISO General Purpose Metric Screw Threads – General Plan

3010     ISO 262 (1998) ISO General Purpose Metric Screw Threads – Selected Sizes for Screws, Bolts and Nuts

3011     ISO 263 (1973) ISO Inch Screw Threads – General Plan and Selection for Screws, Bolts and Nuts – Diameter Range 0.06 to 6 inch

3012     ISO 2758 (2001) Paper – Determination of Bursting Strength

3013     ISO 2858 (1975) End Suction Centrifugal Pump (Rating 16 Bar) Designation Nominal Duty Point and Dimensions -

3014     International Restrictions

3015     ISO 3046 (1986; Am. 1) Reciprocating Internal Combustion Engines – Performance

3016     ISO 34-1 (2010) Rubber, Vulcanized rr Thermoplastic — Determination of Tear Strength — Part 1: Trouser, Angle and Crescent Test Pieces

3017     ISO 37 (2011) Rubber, Vulcanized or Thermoplastic — Determination of Tensile Stress-Strain Properties

3018     ISO 3813 (2004) Resilient Floor Coverings – Cork Floor Tiles

3019     ISO 4021 (1992) Hydraulic Fluid Power – Particulate Contamination Analysis – Extraction of Fluid Samples from Lines of an Operating System

3020     ISO 4126-1 (2004) Safety Devices for Protection Against Excessive Pressure – Part 1: Safety Valves

3021     ISO 4406 (1999) Hydraulic Fluid Power – Fluids – Method for Coding the Level of Contamination by Solid Particles

3022     ISO 4407 (2002) Hydraulic Fluid Power – Fluid Contamination Counting Method Using an Optical Microscope

3023     ISO 4413 (2010) Hydraulic Fluid Power — General Rules and Safety Requirements for Systems and Their Components

3024     ISO 5199 (2002) Technical Specifications for Centrifugal Pumps, Class II

3025     ISO 5209 (1977) General Purpose Industrial Valves – Marking

3026     ISO 5598 (2008) Fluid Power Systems and Components – Vocabulary

3027     ISO 5752 (1982) Metal Valves for Use in Flanged Pipe Systems

3028     ISO 6781 (1983) Thermal Insulation – Qualitative Detection of Thermal Irregularities in Building Envelopes – Infrared Method

3029     ISO 7005-2 (1988) Metallic Flanges Part 2: Cast Iron Flanges

3030     ISO 7240-16 (2007) Fire Detection And Alarm Systems — Part 16: Sound System Control And Indicating Equipment

3031     ISO 7240-19 (2007) Fire Detection and Alarm Systems — Part 19: Design, Installation, Commissioning and Service of Sound Systems for Emergency Purposes

3032     ISO 7810 (2003; Amd 1 2009; Amd 2 2012) Identification Cards

3033     ISO 7811-1 (2002) Identification Cards – Recording Technique – Part 1: Embossing

3034     ISO 7811-2 (2001) Identification Cards – Recording Technique – Part 2: Magnetic Stripe – Low Coercivity

3035     ISO 815-1 (2008) Rubber, Vulcanized or Thermoplastic — Determination of Compression Set — Part 1: At Ambient or Elevated Temperatures

3036     ISO 8528 (1993; R 2005) Reciprocating Internal Combustion Engine Driven Alternating Current Generator Sets

3037     ISO 8601 (2004) Data Elements and Interchange Formats – Information Interchange – Representation of Dates and Times

3038     ISO 8802-3 (2000) Information Technology – Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD)Access Method and Physical Layer Specifications

3039     ISO 8859-1 (1998) Information Technology – 8-Bit Single-Byte Coded Graphic Character Sets – Part 1: Latin Alphabet No. 1

3040     ISO 898-1 (2013) Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel — Part 1: Bolts, Screws and Studs with Specified Property Classes — Coarse Thread and Fine Pitch Thread

3041     ISO 9001 (2008; Corr 1 2009) Quality Management Systems- Requirements

3042     ISO 9461 (1992) Hydraulic Fluid Power – Identification of Valve Ports, Subplates, Control Devices and Solenoids

3043     INTERNATIONAL SAFETY EQUIPMENT ASSOCIATION (ISEA)

3044     ANSI/ISEA Z358.1 (2009) American National Standard for Emergency Eyewash and Shower Equipment

3045     ANSI/ISEA Z87.1 (2010) Occupational and Educational Personal Eye and Face Protection Devices

3046     ANSI/ISEA Z89.1 (2009) American National Standard for Requirements for Industrial Head Protection

3047     INTERNATIONAL TELECOMMUNICATION UNION (ITU)

3048     ITU V.34 (1998) Data Communication Over the Telephone Network: A Modem Operating at Data Signaling Rates of up to 33,600 Bit/S for Use on the General Switched Telephone Network and on Leased Point-To-Point 2-Wire Telephone-Type Circuits

3049     ITU V.42 (2002; Corrigendum 1 2003) Data Communications Over the Telephone Network: Error-Correcting Procedures for DCEs using Asynchronous-to-Synchronous Conversion

3050     ITU V.42 bis (1990) Data Communication over the Telephone Network: Data Compression Procedures for Data Circuit Terminating Equipment (DCE) Using Error Correction Procedures

3051     ITU V.92 (2000; Am 1 2001, Am 2 2002; Corr 1 2003) Data Communication Over the Telephone Network: Enhancements to Recommendation V.90

3052     INTERNATIONAL WINDOW CLEANING ASSOCIATION (IWCA)

3053     IWCA I-14.1 (2001) Window Cleaning Safety Standard

3054     IPC – ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES (IPC)

3055     IPC D330 (1992) Design Guide Manual

3056     ISA – INTERNATIONAL SOCIETY OF AUTOMATION (ISA)

3057     ANSI/ISA 12.13.01 (2003) Performance Requirements for Combustible Gas Detectors

3058     ANSI/ISA 5.1 (2009) Instrumentation Symbols and Identification

3059     ISA 18.1 (1979; R2004) Annunciator Sequences and Specifications

3060     ISA 5.2 (1976; R1992) Binary Logic Diagrams for Process Operations

3061     ISA 5.3 (1983) Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic, and Computer Systems

3062     ISA 51.1 (1979; R1993) Process Instrumentation Terminology

3063     ISA 7.0.01 (1996) Quality Standard for Instrument Air

3064     ISA MC96.1 (1982) Temperature Measurement Thermocouples

3065     ISA RP2.1 (1978) Manometer Tables

3066     ISA RP60.9 (1981) Piping Guide for Control Centers

3067     ITALIAN LAWS AND DECREES (D.M.)

3068     LAW No. 1086 (May 11, 1971) Norms for Works in Reinforced Concrete and Steel and Application Instructions

3069     Law No. 373 (April 30, 1976) Norms for the containment of energy consumption for thermal uses in buildings.

3070     Law No. 46 (March 5, 1990) Safety Norms for Technological Systems

3071     KITCHEN CABINET MANUFACTURERS ASSOCIATION (KCMA)

3072     KCMA A161.1 (2000) Performance & Construction Standards for Kitchen and Vanity Cabinets L.H. BAILEY HORTORIUM (LHBH)

3073     LHBH (1976) Hortus Third

3074     LONMARK INTERNATIONAL (LonMark) LonMark Interoperability (G2u0i0d5e) LonMark Application-Layer Interoperability Guide and LonMark Layer 1-6 Interoperability Guide; Version 3.4 LonMark SCPT List (2003) LonMark SCPT Master List; Version 12 LonMark SNVT List (2003) LonMark SNVT Master List; Version 113

3075     LonMark Interoperability (G2u0i0d5e) LonMark Application-Layer Interoperability Guide and LonMark Layer 1-6 Interoperability Guide; Version 3.4

3076     LonMark SCPT List (2003) LonMark SCPT Master List; Version 12

3077     LonMark SNVT List (2003) LonMark SNVT Master List; Version 113

3078     LonMark XIF Guide (2001) LonMark External Interface File Reference Guide; Revision 4.402

3079     MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS

3080     INDUSTRY (MSS)

3081     MSS SP-104 (2012) Wrought Copper Solder Joint Pressure Fittings

3082     MSS SP-110 (2010) Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends

3083     MSS SP-125 (2010) Gray Iron and Ductile Iron In-Line, Spring-Loaded, Center-Guided Check Valves

3084     MSS SP-25 (2013) Standard Marking System for Valves, Fittings, Flanges and Unions

3085     MSS SP-43 (2013) Wrought Stainless Steel Butt-Welding Fittings

3086     MSS SP-44 (2010; Errata 2011) Steel Pipeline Flanges

3087     MSS SP-45 (2003; R 2008) Bypass and Drain Connections

3088     MSS SP-53 (2012) Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components – Magnetic Particle Examination Method

3089     MSS SP-54 (2013) Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components, – Radiographic Examination Method

3090     MSS SP-55 (2011) Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components – Visual Method for Evaluation of Surface Irregularities

3091     MSS SP-58 (2009) Pipe Hangers and Supports – Materials, Design and Manufacture, Selection, Application, and Installation

3092     MSS SP-61 (2013) Pressure Testing of Valves

3093     MSS SP-67 (2011) Butterfly Valves

3094     MSS SP-69 (2003; Notice 2012) Pipe Hangers and Supports – Selection and Application (ANSI Approved American National Standard)

3095     MSS SP-70 (2011) Gray Iron Gate Valves, Flanged and Threaded Ends

3096     MSS SP-71 (2011; Errata 2013) Gray Iron Swing Check Valves, Flanged and Threaded Ends

3097     MSS SP-72 (2010a) Ball Valves with Flanged or Butt-Welding Ends for General Service

3098     MSS SP-78 (2011) Cast Iron Plug Valves, Flanged and Threaded Ends

3099     MSS SP-80 (2013) Bronze Gate, Globe, Angle and Check Valves

3100     MSS SP-83 (2006) Class 3000 Steel Pipe Unions Socket Welding and Threaded

3101     MSS SP-85 (2011) Gray Iron Globe & Angle Valves Flanged and Threaded Ends

3102     MSS SP-86 (2009; Errata 2011) Guidelines for Metric Data in Standards for Valves, Flanges, Fittings and Actuators

3103     MAPLE FLOORING MANUFACTURERS ASSOCIATION (MFMA)

3104     MFMA AFSFSCL (2003) Athletic Floor Sealer and Finish Specifications and Conformance List #22

3105     MFMA GRHM (2000) Grading Rules for MFMA Northern Hardwood Maple

3106     MFMA GS (1999) Guide Specifications for Maple Flooring Systems

3107     MFMA SSCLFMGF (2000) Sanding, Sealing, Court Lining, Finishing and Resurfacing of Maple Gym Floors

3108     MARBLE INSTITUTE OF AMERICA (MIA)

3109     MIA Design Manual (2003) Dimension Stone Design Manual

3110     MASTER PAINTERS INSTITUTE (MPI)

3111     MPI 1 (Oct 2009) Aluminum Paint

3112     MPI 10 (Oct 2009) Exterior Latex, Flat, MPI Gloss Level 1

3113     MPI 101 (Oct 2009) Epoxy Anti-Corrosive Metal Primer

3114     MPI 107 (Oct 2009) Rust Inhibitive Primer (Water-Based)

3115     MPI 108 (Oct 2009) High Build Epoxy Coating, Low Gloss

3116     MPI 11 (Oct 2009) Exterior Latex, Semi-Gloss, MPI Gloss Level 5

3117     MPI 113 (Oct 2009) Exterior Pigmented Elastomeric Coating (Water Based)

3118     MPI 114 (Oct 2009) Interior Latex, Gloss, MPI Gloss Level 6

3119     MPI 116 (Oct 2009) Epoxy Block Filler

3120     MPI 119 (Oct 2009) Exterior Latex, Gloss

3121     MPI 13 (Oct 2009) Exterior Solvent-Based Semi-Transparent Stain

3122     MPI 134 (Oct 2009) Galvanized Primer (Waterbased)

3123     MPI 138 (Oct 2009) Interior High Performance Latex, MPI Gloss Level 2

3124     MPI 139 (Oct 2009) Interior High Performance Latex, MPI Gloss Level 3

3125     MPI 140 (Oct 2009) Interior High Performance Latex, MPI Gloss Level 4

3126     MPI 141 (Oct 2009) Interior High Performance Latex MPI Gloss Level 5

3127     MPI 144 (Oct 2009) Institutional Low Odor / VOC Interior Latex, MPI Gloss Level 2

3128     MPI 145 (Oct 2009) Institutional Low Odor / VOC Interior Latex, MPI Gloss Level 3

3129     MPI 146 (Oct 2009) Institutional Low Odor/VOC Interior Latex, MPI Gloss Level 4

3130     MPI 147 (Oct 2009) Institutional Low Odor / VOC Interior Latex, Semi-Gloss, MPI Gloss Level 5

3131     MPI 151 (Oct 2009) Interior W.B. Light Industrial Coating,

3132     MPI Gloss Level 3

3133     MPI 153 (Oct 2009) Interior W.B. Light Industrial Coating, Semi-Gloss, MPI Gloss Level 5

3134     MPI 154 (Oct 2009) Interior W.B. Light Industrial Coating, Gloss, MPI Gloss Level 6

3135     MPI 16 (Oct 2009) Exterior Latex-Based Solid Hide Stain

3136     MPI 161 (Oct 2009) Exterior W.B. Light Industrial Coating,

3137     MPI Gloss Level 3

3138     MPI 163 (Oct 2009) Exterior W.B. Light Industrial Coating, Semi-Gloss, MPI Gloss Level 5

3139     MPI 164 (Oct 2009) Exterior W.B. Light Industrial Coating, Gloss, MPI Gloss Level 6

3140     MPI 19 (Oct 2009) Inorganic Zinc Rich Primer

3141     MPI 2 (Oct 2009) Aluminum Heat Resistant Enamel (up to 427 C and 800 F

3142     MPI 21 (Oct 2009) Heat Resistant Enamel, Gloss (up to 205 degrees C and 400 degrees F), MPI Gloss Level 6

3143     MPI 212 (Oct 2009) Floor Coating, Thin Film, for Aircraft Maintenance Facilities

3144     MPI 22 (Oct 2009) Aluminum Paint, High Heat (up to 590 degrees C and 1100 degrees F.

3145     MPI 23 (Oct 2009) Surface Tolerant Metal Primer

3146     MPI 26 (Oct 2009) Cementitious Galvanized Metal Primer

3147     MPI 27 (Oct 2009) Exterior / Interior Alkyd Floor Enamel, Gloss

3148     MPI 31 (Oct 2009) Polyurethane, Moisture Cured, Clear Gloss

3149     MPI 32 (2005) Standard for Alkyd Traffic Marking Paint

3150     MPI 39 (Oct 2009) Interior Latex-Based Wood Primer

3151     MPI 4 (Oct 2009) Interior/Exterior Latex Block Filler

3152     MPI 42 (Oct 2009) Latex Stucco and Masonry Textured Coating

3153     MPI 44 (Oct 2009) Interior Latex, MPI Gloss Level 2

3154     MPI 45 (Oct 2009) Interior Alkyd Primer Sealer

3155     MPI 46 (Oct 2009) Interior Enamel Undercoat

3156     MPI 47 (Oct 2009) Interior Alkyd, Semi-Gloss, MPI Gloss Level 5

3157     MPI 48 (Oct 2009) Interior Alkyd, Gloss, MPI Gloss Level 6

3158     MPI 49 (Oct 2009) Interior Alkyd, Flat, MPI Gloss Level 1

3159     MPI 5 (Oct 2009) Exterior Alkyd Wood Primer

3160     MPI 50 (Oct 2009) Interior Latex Primer Sealer

3161     MPI 51 (Oct 2009) Interior Alkyd, Eggshell, MPI Gloss Level 2

3162     MPI 52 (Oct 2009) Interior Latex, MPI Gloss Level 3

3163     MPI 53 (Oct 2009) Interior Latex, Flat, MPI Gloss Level 1

3164     MPI 54 (Oct 2009) Interior Latex, Semi-Gloss, MPI Gloss Level 5

3165     MPI 56 (Oct 2009) Interior Oil Modified Urethane Clear Gloss

3166     MPI 57 (Oct 2009) Interior Oil Modified Urethane Clear Satin

3167     MPI 59 (Oct 2009) Interior/Exterior Floor Enamel, Low Gloss

3168     MPI 6 (Oct 2009) Exterior Latex Wood Primer

3169     MPI 60 (Oct 2009) Interior/Exterior Latex Floor Paint, Low Gloss

3170     MPI 68 (Oct 2009) Interior/Exterior Latex Floor Enamel, Gloss

3171     MPI 7 (Oct 2009) Exterior Oil Wood Primer

3172     MPI 71 (Oct 2009) Polyurethane, Moisture Cured, Clear, Flat

3173     MPI 72 (Oct 2009) Polyurethane, Two Component, Pigmented, Gloss

3174     MPI 77 (Oct 2009) Epoxy Gloss

3175     MPI 79 (Oct 2009) Alkyd Anti-Corrosive Metal Primer

3176     MPI 8 (Oct 2009) Exterior Alkyd, Flat, MPI Gloss Level I

3177     MPI 9 (Oct 2009) Exterior Alkyd, Gloss, MPI Gloss Level 6

3178     MPI 90 (Oct 2009) Interior Wood Stain, Semi-Transparent

3179     MPI 94 (Oct 2009) Exterior Alkyd, Semi-Gloss, MPI Gloss Level 5

3180     MPI 95 (Oct 2009) Quick Drying Primer for Aluminum

3181     MPI ASM (2004) Architectural Painting Specification Manual

3182     MATERIAL HANDLING INDUSTRY OF AMERICA INC (MHIA)

3183     MHI MH27.1 (2009) Specifications for Underhung Cranes and Monorail Systems

3184     MHI MH27.2 (2009) Specifications for Enclosed Track Underhung Cranes and Monorail Systems

3185     MHI MH28.1 (1997) Specification: Industrial Steel Grade Shelving METAL BUILDING MANUFACTURERS ASSOCIATION (MBMA)

3186     MBMA MBSM (2002) Metal Building Systems Manual

3187     MBMA RSDM (2000) Metal Roofing Systems Design Manual

3188     MIDWEST INSULATION CONTRACTORS ASSOCIATION (MICA)

3189     MICA Insulation Stds (1999) National Commercial & Industrial Insulation Standards

3190     MIDWEST ROOFING CONTRACTORS ASSOCIATION (MRCA)

3191     CERTA (2003) NRCA/MRCA Certified Roofing Torch Applicator Program

3192     MODBUS ORGANIZATION, INC (MODBUS)

3193     Modbus (2006) Modbus Application Protocol Specification; Version 1.1b and Modbus Messaging on TCP/IP Implementation Guide; Version V1.0b

3194     NACE INTERNATIONAL (NACE)

3195     NACE RP0193 (2001) External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

3196     NACE RP0402 (2002) Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

3197     NACE SP0169 (2013) Control of External Corrosion on Underground or Submerged Metallic Piping Systems

3198     NACE SP0177 (2007) Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

3199     NACE SP0178 (2007) Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to be for Immersion Service

3200     NACE SP0185 (2007) Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

3201     NACE SP0188 (1999; R 2006) Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

3202     NACE SP0196 (2011) Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

3203     NACE SP0274 (1974; R 2011) High Voltage Electrical Inspection of Pipeline Coatings

3204     NACE SP0285 (2011) External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

3205     NACE SP0288 (2011) Inspection of Linings on Steel and Concrete Equipment

3206     NACE SP0388 (2001; R 2007) Impressed Current Cathodic Protection of Internal Submerged Surfaces

3207     NACE SP0572 (2001; R 2007) Design, Installation, Operation and Maintenance of Impressed Current Deep Anode Beds

3208     NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)

3209     NASA NPG 8621.1 (2004a) NASA Mishap Reporting, Investigating and Record Keeping Policy

3210     NASA NPG 8715.3 (2004) NASA Safety Manual

3211     NASA-STD 8719.12 (2011; Change 2) Safety Standard for Explosives, Propellants, and Pyrotechnics

3212     NASA-STD-5008A (2011b) Protective Coating of Carbon Steel, Stainless Steel, and Aluminum on Launch Structures, Facilities, and Ground Support Equipment

3213     RCBEA 2.63 (2004) Tank and Storage Tank Un-pressurized

3214     RCBEA GUIDE (2004) NASA Reliability Centered Building and Equipment Acceptance Guide

3215     NATIONAL AIR DUCT CLEANERS ASSOCIATION (NADCA) ACR (2013) Standard for Assessment, Cleaning, and Restoration of HVAC Systems

3216     NADCA HVAC Inspection Man(u2a0l05) Procedures for Assessing the Cleanliness of Commercial HVAC Systems

3217     NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS (NAAMM)

3218     NAAMM AMP 500 (2006) Metal Finishes Manual

3219     NAAMM AMP 521 (2001) Pipe Railing Manual

3220     NAAMM EMLA 920 (2009) Guide Specifications for Metal Lathing and Furring

3221     NAAMM HMMA 801 (2012) Glossary of Terms for Hollow Metal Doors and Frames

3222     NAAMM HMMA 802 (2007) Manufacturing of Hollow Metal Doors and Frames

3223     NAAMM HMMA 810 (2009) Hollow Metal Doors

3224     NAAMM HMMA 820 (2008) Hollow Metal Frames

3225     NAAMM HMMA 830 (2002) Hardware Selection for Hollow Metal Doors and Frames

3226     NAAMM HMMA 840 (2007) Installation and Storage of Hollow Metal Doors and Frames

3227     NAAMM HMMA 850 (2000) Fire Rated Hollow Metal Doors and Frames

3228     NAAMM HMMA 862 (2003) Guide Specifications for Commercial Security Hollow Metal Doors and Frames

3229     NAAMM HMMA 863 (2004) Guide Specifications for Detention Security Hollow Metal Doors and Frames

3230     NAAMM HMMA HMM (1999; R2000) Hollow Metal Manual

3231     NAAMM MBG 531 (2009) Metal Bar Grating Manual

3232     NAAMM MBG 532 (2009) Heavy Duty Metal Bar Grating Manual

3233     NATIONAL BOARD OF BOILER AND PRESSURE VESSEL INSPECTORS (NBBI)

3234     NBBI NB-23 (2011; AMD 2008; AMD 2009; AMD 2010) National Board Inspection Code

3235     NBBI NB-27 (1991) National Board Rules and Recommendations for the Design and Construction of Boiler Blowoff Systems

3236     NATIONAL CABLE AND TELECOMMUNICATIONS ASSOCIATION (NCTA)

3237     NCTA RP (2003) NCTA Recommended Practices for Measurements on Cable Television Systems

3238     NATIONAL CONCRETE MASONRY ASSOCIATION (NCMA)

3239     NCMA TR127B (2010) Design Manual for Segmental Retaining Walls

3240     NATIONAL COUNCIL ON RADIATION PROTECTION AND MEASUREMENTS (NCRP)

3241     NCRP 102 (1989) Medical X-Ray, Electron Beam and Gamma-Ray Protection for Energies up to 50 MeV (Equipment Design, Performance and Use)

3242     NCRP 144 (2003) Radiation Protection for Particle Accelerator Facilities

3243     NCRP 145 (2003) Radiation Protection in Dentistry NCRP 49 (1976) Structural Shielding Design and Evaluation

3244     NCRP 49 (1976) Structural Shielding Design and Evaluation for Medical Use of X-Rays and Gamma Rays of Energies up to 10 MeV

3245     NATIONAL DRILLING ASSOCIATION (NDA)

3246     DCDMA TM (1991) DCDMA Technical Manual

3247     NATIONAL ELECTRICAL CONTRACTORS ASSOCIATION (NECA)

3248     NECA/BICSI 568 (2006) Standard for Installing Building Telecommunications Cabling

3249     NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)

3250     ANSI ANSLG C78.41 (2006) For Electric Lamps–Guidelines for Low-Pressure Sodium Lamps

3251     ANSI ANSLG C78.42 (2009) For Electric Lamps: High-Pressure Sodium Lamps

3252     ANSI C119.1 (2011) Electric Connectors – Sealed Insulated Underground Connector Systems Rated 600 Volts

3253     ANSI C12.1 (2008) Electric Meters Code for Electricity Metering

3254     ANSI C12.18 (2006) Protocol Specification for ANSI Type 2 Optical Port

3255     ANSI C12.20 (2010) Electricity Meters – 0.2 and 0.5 Accuracy Classes

3256     ANSI C12.7 (2005) Requirements for Watthour Meter Sockets

3257     ANSI C136.10 (2010) American National Standard for Roadway and Area Lighting Equipment-Locking-Type Photocontrol Devices and Mating Receptacles–Physical and Electrical Interchangeability and Testing

3258     ANSI C136.11 (2006) American Standard for Roadway Lighting Equipment Series Sockets and Series Sockets Receptacles

3259     ANSI C136.13 (2004; R 2009) American National Standard for Roadway Lighting Equipment, Metal Brackets for Wood Poles

3260     ANSI C136.15 (2011) American National Standard for Roadway Lighting Equipment – High-Intensity-Discharge and Low-Pressure Sodium Lamps in Luminaires – Field Identification

3261     ANSI C136.2 (2004; R 2009) American National Standard for Roadway and Area Lighting Equipment: Luminaires Voltage Classification

3262     ANSI C136.21 (2004; R 2009) American National Standard for Roadway and Area Lighting Equipment – Vertical Tenons Used with Post-Top-Mounted Luminaires

3263     ANSI C136.3 (2005; R 2009) American National Standard for Roadway and Area Lighting Equipment Luminaire Attachments

3264     ANSI C136.6 (2004) American National Standard for Roadway Lighting Equipment – Metal Heads and Reflector Assemblies – Mechanical and Optical Interchangeability

3265     ANSI C136.9 (2003) American National Standard for Roadway and Area Lighting Equipment – Socket Support Assemblies for Metal Heads – Mechanical Interchangeability

3266     ANSI C29.1 (1988; R 2012) American National Standard for Electrical Power Insulators–Test Methods

3267     ANSI C29.2 (2012) American National Standard for Insulators – Wet-Process Porcelain and Toughened Glass – Suspension Type

3268     ANSI C29.3 (1986; R 2012) American National Standard for Wet Process Porcelain Insulators – Spool Type

3269     ANSI C29.4 (1989; R 2012) Standard for Wet-Process Porcelain Insulators – Strain Type

3270     ANSI C29.5 (1984; R 2002) Wet-Process Porcelain Insulators (Low and Medium Voltage Pin Type)

3271     ANSI C29.9 (1983; R 2012) American National Standard for Wet-Process Porcelain Insulators – Apparatus, Post-Type

3272     ANSI C37.44 (1981; R 1992) Special for Distribution Oil Cutouts and Fuze Links

3273     ANSI C62.61 (1993) American National Standard for Gas Tube Surge Arresters on Wire Line Telephone Circuits

3274     ANSI C78.1381 (1998) American National Standard for Electric Lamps – 250-Watt, 70 Watt, M85 Metal-Halide Lamps

3275     ANSI C78.23 (1995; R 2003) American National Standard for Incandescent Lamps – Miscellaneous Types

3276     ANSI C78.379 (2006) American National Standard for Electric Lamps–Classification of the Beam Patterns of Reflector Lamps

3277     ANSI C78.389 (2004; R 2009) American National Standard for Electric Lamps – High Intensity Discharge (HID) – Methods of Measuring Characteristics

3278     ANSI C78.40 (2011) American National Standard for Mercury Lamps–Specifications

3279     ANSI C78.901 (2005) American National Standard for Electric Lamps – Single Base Fluorescent Lamps–Dimensional and Electrical Characteristics

3280     ANSI C80.1 (2005) American National Standard for Electrical Rigid Steel Conduit (ERSC)

3281     ANSI C80.3 (2005) American National Standard for Electrical Metallic Tubing (EMT)

3282     ANSI C80.5 (2005) American National Standard for Electrical Rigid Aluminum Conduit

3283     ANSI C82.1 (2004) American National Standard for Electric Lamp Ballasts – Line Frequency Fluorescent Lamp Ballasts

3284     ANSI C82.2 (2002) American National Standard for Lamp Ballasts–Methods of Measurement of Fluorescent Lamp Ballasts

3285     ANSI C82.4 (2002) American National Standard for Ballasts for High-Intensity-Discharge and Low-Pressure Sodium (LPS) Lamps (Multiple-Supply Type)

3286     ANSI NEMA ANSLG C78.390 (2006) Method of Designation for Electric Lamps, ANSI Z535.1 (2006; R 2011) American National Standard for Safety–Color Code

3287     ANSI Z535.1 (2006; R 2011) American National Standard for Safety–Color Code

3288     ANSI/ANSLG C78.43 (2013) American National Standard for Electric Lamps – Single-Ended Metal-Halide Lamps

3289     ANSI/NEMA C78.LL 1256 (2003) Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)

3290     ANSI/NEMA LD 3 (2005) Standard for High-Pressure Decorative Laminates

3291     ANSI/NEMA OS 1 (2008; Amd 2010) Sheet-Steel Outlet Boxes, Device Boxes, Covers, and Box Supports

3292     ANSI/NEMA OS 2 (2008; AMD 2010) Nonmetallic Outlet Boxes, Device Boxes, Covers, and Box Supports

3293     ANSI/NEMA PB 2.1 (2013) General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 V or Less

3294     ANSI/NEMA WC 66 (2013) Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pairs

3295     ANSI/NEMA WC 71/ICEA S-96(-169599) Standard for Nonshielded Cables Rated 2001-5000 Volts for use in the Distribution of Electric Energy

3296     NEMA 107 (1987; R 1993) Methods of Measurement of Radio Influence Voltage (RIV) of High-Voltage Apparatus (inactive)

3297     NEMA 250 (2008) Enclosures for Electrical Equipment (1000 Volts Maximum)

3298     NEMA AB 1 (2002) Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures

3299     NEMA AB 3 (2013) Molded Case Circuit Breakers and Their Application

3300     NEMA ANSLG C78.377 (2011) American National Standard for Electric Lamps— Specifications for the Chromaticity of Solid State Lighting Products

3301     NEMA ANSLG C78.380 (2007) Electric Lamps – High Intensity Discharge Lamps, Method of Designation

3302     NEMA ANSLG C78.44 (2008) For Electric Lamps – Double-Ended Metal Halide Lamps

3303     NEMA ANSLG C78.81 (2013) American National Standard for Electric Lamps–Double-Capped Fluorescent Lamps–Dimensional and Electrical Characteristics

3304     NEMA ANSLG C82.11 (2011) Lamp Ballasts – High-Frequency Fluorescent Lamp Ballasts

3305     NEMA ANSLG C82.14 (2006) Lamp Ballasts Low-Frequency Square Wave Electronic Ballasts — for Metal Halide Lamps

3306     NEMA ANSLG C82.9 (2010) American National Standard for Lamp Ballasts— High-Intensity Discharge and Low-Pressure Sodium Lamps— Definitions

3307     NEMA BU 1.1 (2010) General Instructions for Proper Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less

3308     NEMA C119.4 (2011) Electric Connectors – Connectors for Use Between Aluminum-to-Aluminum or Aluminum-to-Copper Conductors Designed for Normal Operation at or Below 93 Degrees C and Copper-to-Copper Conductors Designed for Normal Operation at or Below 100 Degrees C

3309     NEMA C12.19 (2008) Utility Industry End Device Data Tables

3310     NEMA C12.4 (1984; R 2011) Registers – Mechanical Demand

3311     NEMA C135.4 (1987) Zinc-Coated Ferrous Eyebolts and Nuts for Overhead Line Construction

3312     NEMA C136.10 (2010) American National Standard for Roadway and Area Lighting Equipment-Locking-Type Photocontrol Devices and Mating Receptacles–Physical and Electrical Interchangeability and Testing

3313     NEMA C136.20 (2012) American National Standard for Roadway and Area Lighting Equipment – Fiber Reinforced Composite (FRC) Lighting Poles

3314     NEMA C136.31 (2010) American National for Roadway and Area Lighting Equipment – Luminaire Vibration

3315     NEMA C37.50 (2012) American National Standard for Switchgear–Low-Voltage AC Power Circuit Breakers Used in Enclosures – Test Procedures

3316     NEMA C37.51 (2003; R 2010; Addenda 2010) American National Standard for Switchgear–Metal Enclosed Low-Voltage AC Power, Circuit-Breaker Switchgear Assemblies-Conformance Test Procedures

3317     NEMA C37.72 (1987) Manually-Operated, Dead-Front Padmounted Switchgear with Load Interrupting Switches and Separable Connectors for Alternating-Current Systems

3318     NEMA C50.10 (1990) Rotating Electrical Machinery – Synchronous Machines

3319     NEMA C50.41 (2012) American National Standard for Polyphase Induction Motors for Power Generating Stations

3320     NEMA C78.LL 3 (2003) Electric Lamps – Procedures for High Intensity Discharge Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure

3321     NEMA C82.77 (2002) Harmonic Emission Limits – Related Power Quality Requirements for Lighting Equipment

3322     NEMA DC 3 (2008) Residential Controls – Electrical Wall-Mounted Room Thermostats

3323     NEMA ESPG (2009-2010) Electrical Standards and Product Guide (ESPG)

3324     NEMA FB 1 (2012) Standard for Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit, Electrical Metallic Tubing, and Cable

3325     NEMA FU 1 (2012) Low Voltage Cartridge Fuses

3326     NEMA IA 2 (2005) Programmable Controllers – Parts 1 thru 8

3327     NEMA ICS 1 (2000; R 2008; E 2010) Standard for Industrial Control and Systems: General Requirements

3328     NEMA ICS 10 Part 2 (2005) AC Transfer Equipment, Part 2: Static AC Transfer Equipment

3329     NEMA ICS 2 (2000; R 2005; Errata 2008) Standard for Controllers, Contactors, and Overload Relays Rated 600 V

3330     NEMA ICS 3 (2005; R 2010) Medium-Voltage Controllers Rated 2001 to 7200 V AC

3331     NEMA ICS 3.1 (2009) Guide for the Application, Handling, Storage, Installation and Maintenance of Medium-Voltage AC Contactors, Controllers and Control Centers

3332     NEMA ICS 4 (2010) Terminal Blocks

3333     NEMA ICS 5 (2000; R 2010) Control Circuit and Pilot Devices

3334     NEMA ICS 6 (1993; R 2011) Enclosures

3335     NEMA ICS 7 (2006) Adjustable-Speed Drives

3336     NEMA ICS 8 (2011) Crane and Hoist Controllers

3337     NEMA IEC 60529 (2004) Degrees of Protection Provided by Enclosures (IP Code)

3338     NEMA KS 1 (2001; R 2006) Enclosed and Miscellaneous Distribution Equipment Switches (600 V Maximum)

3339     NEMA LA 1 (2009) Standard for Surge Arresters

3340     NEMA LD 3.1 (1995) Performance, Application, Fabrication, and Installation of High-Pressure Decorative Laminates

3341     NEMA LI 1 (1998; R 2011) Industrial Laminating Thermosetting Products

3342     NEMA LL 1 (1997; R 2002) Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLP Extraction

3343     NEMA LSD 25 (2008) Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting Systems

3344     NEMA MG 1 (2011; Errata 2012) Motors and Generators

3345     NEMA MG 10 (2001; R 2007) Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors

3346     NEMA MG 11 (1977; R 2012) Energy Management Guide for Selection and Use of Single Phase Motors

3347     NEMA MG 2 (2014) Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators

3348     NEMA PB 1 (2011) Panelboards

3349     NEMA PB 2 (2011) Deadfront Distribution Switchboards

3350     NEMA PE 1 (2003) Uninterruptible Power Systems (UPS) Specification and Performance Verification

3351     NEMA PREMIUM (2007) General Specification for Consultants, Industrial and Municipal: NEMA Premium Efficiency Electric Motors (600 Volts or Less)

3352     NEMA RN 1 (2005; R 2013) Polyvinyl-Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit

3353     NEMA SG 2 (1993) Standard for High-Voltage Fuses

3354     NEMA SG 4 (2009; R 2013) AC High-Voltage Circuit Breakers

3355     NEMA SG 6 (2000) Standard for Power Switching Equipment

3356     NEMA SM 23 (1991; R 2002) Steam Turbines for Mechanical Drive Service

3357     NEMA ST 1 (1988; R 1994; R 1997) Specialty Transformers (Except General Purpose Type)

3358     NEMA ST 20 (1992; R 1997) Standard for Dry-Type Transformers for General Applications

3359     NEMA TC 14 (2002) Standard for Reinforced Thermosetting Resin Conduit (RTRC) and Fittings

3360     NEMA TC 2 (2013) Standard for Electrical Polyvinyl Chloride (PVC) Conduit

3361     NEMA TC 3 (2013) Standard for Polyvinyl Chloride (PVC) Fittings for Use With Rigid PVC Conduit and Tubing

3362     NEMA TC 6 & 8 (2013) Standard for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installations

3363     NEMA TC 7 (2013) Standard for Smooth-Wall Coilable Electrical Polyethylene Conduit

3364     NEMA TC 9 (2004) Standard for Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground

3365     (PVC) Plastic Utilities Duct for Underground Installation NEMA TP 1 (2002) Guide for Determining Energy Efficiency for

3366     NEMA TP 1 (2002) Guide for Determining Energy Efficiency for Distribution Transformers

3367     NEMA TR 1 (1993; R 2000) Transformers, Regulators, and Reactors

3368     NEMA TS-1 (1989; R 2005) Traffic Control Systems (not recommended for new designs)

3369     NEMA TS-2 (2003) Traffic Controller Assemblies with NTCIP Requirements – Version 02.06

3370     NEMA VE 1 (2009) Standard for Metal Cable Tray Systems NEMA VE 2 (2013) Cable Tray Installation Guidelines NEMA WC 2 (1980; Rev 1 1989; R 1998; R 2005) Standard for

3371     NEMA VE 2 (2013) Cable Tray Installation Guidelines NEMA WC 2 (1980; Rev 1 1989; R 1998; R 2005) Standard for Steel Armor and Associated Coverings for

3372     NEMA WC 2 (1980; Rev 1 1989; R 1998; R 2005) Standard for Steel Armor and Associated Coverings for Impregnated Paper Insulated Cables (ICEA S-67-401 5th Edition)

3373     NEMA WC 27500 (2012) Standard for Aerospace and Industrial Electrical Cable

3374     NEMA WC 3 (1992; Rev 1 1994) Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy

3375     NEMA WC 58/ICEA S-75-381(2008) Portable and Power Feeder Cables for Use in Mines and Similar Applications

3376     NEMA WC 7 (1988; Rev 3 1996) Cross-Linked-Thermosetting-Polyethylene-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy

3377     NEMA WC 70 (2009) Power Cable Rated 2000 V or Less for the Distribution of Electrical Energy–S95-658

3378     NEMA WC 72 (1999; R 2004) Standard for Continuity of Coating Testing for Electrical Conductors

3379     NEMA WC 74/ICEA S-93-639(2012) 5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy

3380     NEMA WC 8 (1988; Rev 3 1996) Ethylene-Propylene-Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy

3381     NEMA WD 1 (1999; R 2005; R 2010) Standard for General Color Requirements for Wiring Devices

3382     NEMA WD 6 (2012) Wiring Devices Dimensions Specifications

3383     NEMA WD 7 (2011) Occupancy Motion Sensors Standard

3384     NEMA Z535.1 (2006; R 2011) Safety Colors

3385     NEMA Z535.4 (2011) American National Standard for Product Safety Signs and Labels

3386     NEMA/ANSI C12.10 (2011) Physical Aspects of Watthour Meters – Safety Standards

3387     NEMA/ANSI C12.11 (2007) Instrument Transformers for Revenue Metering, 10 kV BIL through 350 kV BIL (0.6 kV NSV through 69 kV NSV)

3388     NEMA/ANSI C29.7 (1996; 2002) American National Standard for Wet Process Porcelain Insulators – High-Voltage Line

3389     NATIONAL ELEVATOR INDUSTRY, INC. (NEII)

3390     NEII-1 (2000; R thru 2010) Building Transportation Standards and Guidelines, including the Performance Standards Matrix for New Elevator Installation

3391     NATIONAL ENVIRONMENTAL BALANCING BUREAU (NEBB)

3392     NEBB Commissioning Standa(r2d009) Procedural Standards for Whole Building Systems Commissioning of New Construction; 3rd Edition

3393     NEBB MASV (2006) Procedural Standards for Measurements and Assessment of Sound and Vibration

3394     NEBB PROCEDURAL STANDARDS(2005) Procedural Standards for TAB (Testing, Adjusting and Balancing) Environmental Systems

3395     NATIONAL FENESTRATION RATING COUNCIL (NFRC)

3396     NFRC 100 (2010) Procedure for Determining Fenestration Product U-Factors

3397     NFRC 200 (2010) Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence

3398     NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

3399     NFPA 1 (2012; TIA 11-1) Fire Code

3400     NFPA 10 (2013) Standard for Portable Fire Extinguishers

3401     NFPA 101 (2012; Amendment 1 2012) Life Safety Code

3402     NFPA 105 (2013) Standard for Installation of Smoke Door Assemblies and Other Opening Protectives

3403     NFPA 11 (2010; TIA 10-1) Standard for Low-, Medium- and High- Expansion Foam

3404     NFPA 110 (2013) Standard for Emergency and Standby Power Systems

3405     NFPA 111 (2013) Standard on Stored Electrical Energy Emergency and Standby Power Systems

3406     NFPA 12 (2011) Standard on Carbon Dioxide Extinguishing Systems

3407     NFPA 1221 (2013) Standard for the Installation, Maintenance and Use of Emergency Services Communications Systems

3408     NFPA 12A (2009) Standard on Halon 1301 Fire Extinguishing Systems

3409     NFPA 13 (2013; TIA 10-1; TIA 11-2; ERTA 2014) Standard for the Installation of Sprinkler Systems

3410     NFPA 13D (2013) Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes

3411     NFPA 13E (2010) Recommended Practice for Fire Department Operations in Properties Protected by Sprinkler and Standpipe Systems

3412     NFPA 13R (2013) Standard for the Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height

3413     NFPA 14 (2013) Standard for the Installation of Standpipes and Hose Systems

3414     NFPA 15 (2012) Standard for Water Spray Fixed Systems for Fire Protection

3415     NFPA 16 (2011) Standard for Installation of Foam-Water Sprinkler and Foam-Water Spray Systems

3416     NFPA 17 (2013) Standard for Dry Chemical Extinguishing Systems

3417     NFPA 170 (2012) Standard for Fire Safety and Emergency Symbols

3418     NFPA 17A (2013) Standard for Wet Chemical Extinguishing Systems

3419     NFPA 1961 (2013) Standard on Fire Hose

3420     NFPA 1963 (2014) Standard for Fire Hose Connections

3421     NFPA 1971 (2013; TIA 13-1; TIA 13-2; TIA 13-3) Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting

3422     NFPA 20 (2013) Standard for the Installation of Stationary Pumps for Fire Protection

3423     NFPA 2001 (2012; AMD 1 2012) Standard on Clean Agent Fire Extinguishing Systems

3424     NFPA 211 (2013) Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances

3425     NFPA 214 (2011; Errata 2011) Standard on Water-Cooling Towers

3426     NFPA 22 (2013) Standard for Water Tanks for Private Fire Protection

3427     NFPA 220 (2012) Standard on Types of Building Construction

3428     NFPA 24 (2013) Standard for the Installation of Private Fire Service Mains and Their Appurtenances

3429     NFPA 241 (2013) Standard for Safeguarding Construction,Alteration, and Demolition Operations

3430     NFPA 25 (2014) Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems

3431     NFPA 252 (2012) Standard Methods of Fire Tests of Door Assemblies

3432     NFPA 253 (2011) Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source

3433     NFPA 255 (2006; Errata 2006) Standard Method of Test of Surface Burning Characteristics of Building Materials

3434     NFPA 257 (2012) Standard on Fire Test for Window and Glass Block Assemblies

3435     NFPA 262 (2011) Standard method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces

3436     NFPA 265 (2011) Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile Coverings on Full Height Panels and Walls

3437     NFPA 268 (2012) Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source

3438     NFPA 286 (2011) Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth

3439     NFPA 291 (2013) Recommended Practice for Fire Flow Testing and Marking of Hydrants

3440     NFPA 30 (2012; Errata 2011; Errata 2011) Flammable and Combustible Liquids Code

3441     NFPA 303 (2011) Fire Protection Standards for Marinas and Boatyards

3442     NFPA 306 (2014) Standard for Control of Gas Hazards on Vessels

3443     NFPA 30A (2012; Errata 2011) Code for Motor Fuel Dispensing Facilities and Repair Garages

3444     NFPA 31 (2011) Standard for the Installation of Oil-Burning Equipment

3445     NFPA 329 (2010) Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases

3446     NFPA 37 (2010; TIA 10-1; TIA 13-2; TIA 13-3) Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines

3447     NFPA 385 (2012) Standard for Tank Vehicles for Flammable and Combustible Liquids

3448     NFPA 407 (2012; TIA 11-1) Standard for Aircraft Fuel Servicing

3449     NFPA 409 (2011; Errata 11-1) Standard on Aircraft Hangars

3450     NFPA 418 (2011) Standard for Heliports

3451     NFPA 45 (2011) Standard on Fire Protection for Laboratories Using Chemicals

3452     NFPA 496 (2013) Standard for Purged and Pressurized Enclosures for Electrical Equipment

3453     NFPA 505 (2013) Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations

3454     NFPA 51B (2014) Standard for Fire Prevention During Welding, Cutting, and Other Hot Work

3455     NFPA 54 (2012) National Fuel Gas Code

3456     NFPA 55 (2013; TIA 12-1; TIA 13-2; Errata 2013) Compressed Gases and Cryogenic Fluids Codes

3457     NFPA 58 (2014; TIA 13-1; TIA 13-2; Errata 13-1; TIA 13-3; Errata 14-2) Liquefied Petroleum Gas Code

3458     NFPA 65 (1993) Processing and Finishing of Aluminum

3459     NFPA 664 (2012; Errata 13-1; Errata 13-2) Standard for the Prevention of Fires and Explosions in Wood

3460     NFPA 70 (2014; AMD 1 2013; Errata 1 2013; AMD 2 2013; Errata 2 2013) National Electrical Code

3461     NFPA 701 (2010) Standard Methods of Fire Tests for Flame Propagation of Textiles and Films

3462     NFPA 704 (2012) Standard System for the Identification of the Hazards of Materials for Emergency Response

3463     NFPA 70B (2013) Recommended Practice for Electrical Equipment Maintenance

3464     NFPA 70E (2012; Errata 2012) Standard for Electrical Safety in the Workplace

3465     NFPA 72 (2013) National Fire Alarm and Signaling Code

3466     NFPA 75 (2013; Errata 2013) Standard for the Protection of Information Technology Equipment

3467     NFPA 77 (2014) Recommended Practice on Static Electricity

3468     NFPA 780 (2014) Standard for the Installation of Lightning Protection Systems

3469     NFPA 79 (2012) Electrical Standard for Industrial Machinery

3470     NFPA 80 (2013) Standard for Fire Doors and Other Opening Protectives

3471     NFPA 80A (2012) Recommended Practice for Protection of Buildings from Exterior Fire Exposures

3472     NFPA 82 (2014) Standard on Incinerators and Waste and Linen Handling Systems and Equipment

3473     NFPA 85 (2011; Errata 2011) Boiler and Combustion Systems Hazards Code

3474     NFPA 85C (1997) Prevention of Furnace Explosions in Fuel Oil- and Natural Gas-Fired Single Burner Boiler-Furnaces

3475     NFPA 90A (2012) Standard for the Installation of Air Conditioning and Ventilating Systems

3476     NFPA 90B (2012) Standard for the Installation of Warm Air Heating and Air Conditioning Systems

3477     NFPA 91 (2010) Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists and Noncombustible Particulate Solids

3478     NFPA 96 (2014) Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations

3479     NFPA 99 (2012; TIA 11-1; TIA 11-2; Errata 12-1; TIA 12-3;

3480     TIA 13-4; TIA 13-5) Health Care Facilities Code

3481     NATIONAL FLUID POWER ASSOCIATION (NFLPA)

3482     ANSI/NFLPA T3.12.3 (1992; Rev 2) Pneumatic Fluid Power – Pressure Regulator – Industrial Type

3483     ANSI/NFLPA T3.16.2 (1997; Rev 1; Reapproved 2005) Hydraulic Fluid Power – Design for Nonintegral Industrial Reservoirs

3484     NFLPA T2.13.1 (2007; 5th Ed) Recommended Practice – Hydraulic Fluid Power – Use Of Fire Resistant Fluids In Industrial Systems

3485     NFLPA T3.28.9 (1989; R 2009; 2nd Ed) Fluid Power Systems and Products – Moving Parts Fluid Controls – Method of Diagramming

3486     NFLPA T3.5.1 (2002; R 2010; 3rd Ed) Hydraulic Fluid Power – Valves, Mounting Surfaces

3487     NATIONAL HARDWOOD LUMBER ASSOCIATION (NHLA)

3488     NHLA Rules (2011) Rules for the Measurement & Inspection of Hardwood & Cypress

3489     NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES (NICET)

3490     NICET 1014-7 (2010) Program Detail Manual for Certification in the Field of Fire Protection Engineering Technology (Field Code 003) Subfield of Automatic Sprinkler System Layout

3491     NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH)

3492     NIOSH 2003-154 (2003; 4th Ed; Supple 3) NIOSH Manual of Analytical Methods

3493     NIOSH 2008-132 (2008) Attention Emergency Responders – Guidance on Emergency Responder – Personal Protective Equipment (PPE) for Response to Chemical, Biological, Radiological, and Nuclear (CBRN) Terrorism Incidents

3494     NIOSH 81-123 (1981) Occupational Health Guideline for Chemical Hazards, (Vols. 1, 2, and 3)

3495     NIOSH 85-115 (1985) Occupational Safety and Health Guidance Manual for Hazardous Waste Site Activities

3496     NIOSH 99-109 (Latest) Certified Equipment List

3497     NATIONAL INSTITUTE OF JUSTICE (NIJ)

3498     NIJ Std 0108.01 (1985) Ballistic Resistant Protective Materials

3499     NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST)

3500     NIST BEES 4.0 (2007) Building for Environmental and Economic Sustainability

3501     NIST FIPS 140-2 (2001) Security Requirements for Cryptographic Modules

3502     NIST FIPS 197 (2001) Advance Encryption Standard

3503     NIST HB 135 (1995; Annual Suppl 2010) Life Cycle Costing Manual for the Federal Energy Management Program

3504     NIST HB 44 (2013) Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices

3505     NIST IR 91-4756 (1991) Laboratory Accreditation Activities in the United States

3506     NIST PS 1 (2009) DOC Voluntary Product Standard PS 1-07, Structural Plywood

3507     NIST SP 250 (1991) Calibration Services Users Guide

3508     NATIONAL LIME ASSOCIATION (NLA)

3509     NLA BUL 326 (2004) Lime-Treated Soil Construction Manual: Lime Stabilization and Lime Modification

3510     NATIONAL PARK SERVICE (NPS)

3511     NPS Hist Prop (1995) National Standards for the Treatment of Historic Properties with Guidelines for Preserving, Rehabilitating, Restoring, and Reconstructing Historic Buildings

3512     NPS TPS Brief 1 (2000) Assessing Cleaning and Water-Repellent Treatments for Historic Masonry Buildings

3513     NPS TPS Brief 2 (1998) Repointing Mortar Joints in Historic Masonry Buildings

3514     NATIONAL PRECAST CONCRETE ASSOCIATION (NPCA) NPCA QC Manual (2012) Quality Control Manual for Precast and Prestressed Concrete Plants

3515     NATIONAL READY MIXED CONCRETE ASSOCIATION (NRMCA)

3516     NRMCA CPMB 100 (2000; R 2006) Concrete Plant Standards

3517     NRMCA QC 3 (2011) Quality Control Manual: Section 3, Plant Certifications Checklist: Certification of Ready Mixed Concrete Production Facilities

3518     NRMCA TMMB 100 (2001; R 2007) Truck Mixer, Agitator and Front Discharge Concrete Carrier Standards

3519     NATIONAL ROOFING CONTRACTORS ASSOCIATION (NRCA)

3520     NRCA 0405 (2001; 5th Ed) Roofing and Waterproofing Manual

3521     NRCA 0409 (2006) Architectural Sheet Metal and Metal Roofing Manual

3522     NRCA 0418 (2009) Steep-slope Roof System Manual

3523     NRCA 0420 (2010) Architectural Metal Flashing, Condensation Control and Reroofing

3524     NRCA 3740 (2005) The NRCA Waterproofing Manual

3525     NRCA 3758 (2009) Guidelines for Roof-mounted Photovoltaic System Installation

3526     NRCA 3760 Building Owners Guide to Roof-mounted Photovoltaic Systems

3527     NRCA C3701 (2002) Repair Manual for Low Slope Membrane Roof Systems

3528     NRCA Details (2003) NRCA Roof Perimeter Flashing Systems Construction Details for Class 1 Roof Construction

3529     NRCA RoofMan (2011 thru 2014) The NRCA Roofing Manual

3530     NATIONAL SECURITY TELECOMMUNICATIONS AND INFORMATION SYSTEMS SECURITY (NSTISS)

3531     NSTISSAM TEMPEST/2-95 (1995; Am A 2000) RED/BLACK Installation Guidance

3532     NSTISSI-7003 (1996) Protective Distribution Systems (PDS)

3533     NATIONAL TERRAZZO & MOSAIC ASSOCIATION (NTMA)

3534     NTMA Info Guide (2000) Terrazzo Information Guide

3535     NATURAL RESOURCE, AGRICULTURAL AND ENGINEERING SERVICE (NRAES)

3536     NRAES 54 (1992) On-Farm Composting Handbook

3537     NOFMA: THE WOOD FLOORING MANUFACTURERS ASSOCIATION (NOFMA)

3538     NOFMA Grading Rules (1999) Official Flooring Grading Rules

3539     NORTH AMERICAN INSULATION MANUFACTURERS ASSOCIATION (NAIMA)

3540     NAIMA AH112 (1993) Cleaning Fibrous Glass or Lined Sheet Metal Ducts

3541     NAIMA AH116 (2002, 5th Ed) Fibrous Glass Duct Construction Standards

3542     NAIMA AH122 (2006) Cleaning Fibrous Insulated Duct Systems – Recommended Practices

3543     NAIMA AH127 (1999) Impact of Duct Cleaning on Internal Duct Insulation

3544     NORTHEASTERN LUMBER MANUFACTURERS ASSOCIATION (NELMA)

3545     NELMA Grading Rules (2013) Standard Grading Rules for Northeastern Lumber

3546     NSF INTERNATIONAL (NSF)

3547     NSF 372 (2011) Drinking Water System Components – Lead Content

3548     NSF 53A (2012) Drinking Water Treatment Units – Health Effects

3549     NSF Food Equipment (2005) NSF Product Listings of Food Equipment and Related Products, Components and Materials

3550     NSF/ANSI 12 (2012) Automatic Ice Making Equipment

3551     NSF/ANSI 13 (2012) Refuse Processors and Processing Equipment

3552     NSF/ANSI 14 (2014) Plastics Piping System Components and Related Materials

3553     NSF/ANSI 169 (2012)Special Purpose Food Equipment and Devices

3554     NSF/ANSI 18 (2012) Manual Food and Beverage Dispensing Equipment

3555     NSF/ANSI 2 (2012) Food Equipment

3556     NSF/ANSI 20 (2012) Commercial Bulk Milk Dispensing Equipment

3557     NSF/ANSI 21 (2012) Thermoplastic Refuse Containers

3558     NSF/ANSI 222 (2006e; R 2011) Ozone Generators

3559     NSF/ANSI 25 (2012) Vending Machines for Food and Beverage

3560     NSF/ANSI 29 (2012) Detergent and Chemical Feeders for Commercial Spray-type Dishwashing Machines

3561     NSF/ANSI 3 (2012) Commercial Warewashing Equipment

3562     NSF/ANSI 35 (2012) High Pressure Decorative Laminates for Surfacing Food Service Equipment

3563     NSF/ANSI 36 (2012) Dinnerware

3564     NSF/ANSI 37 (2012) Air Curtains for Entranceways in Food and Food Service Establishments

3565     NSF/ANSI 4 (2009; Addenda 2012) Commercial Cooking, Rethermalization and Powered Hot Food Holding and Transport Equipment

3566     NSF/ANSI 42 (2013) Drinking Water Treatment Units – Aesthetic Effects

3567     NSF/ANSI 51 (2012) Food Equipment Materials

3568     NSF/ANSI 52 (2012) Supplemental Flooring

3569     NSF/ANSI 59 (2012) Mobile Food Carts

3570     NSF/ANSI 6 (2012) Dispensing Freezers

3571     NSF/ANSI 60 (2013) Drinking Water Treatment Chemicals – Health Effects

3572     NSF/ANSI 61 (2013) Drinking Water System Components – Health Effects

3573     NSF/ANSI 7 (2014) Commercial Refrigerators and Freezers

3574     NSF/ANSI 8 (2012) Commercial Powered Food Preparation Equipment

3575     OPC FOUNDATION (OPC)

3576     OPC DA (2002) OPC Data Access (DA) Specification; Version 2.05a

3577     ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT (OECD)

3578     OECD Test 203 (1992) Fish Acute Toxicity Test PIPE FABRICATION INSTITUTE (PFI)

3579     PIPE FABRICATION INSTITUTE (PFI)

3580     PFI ES 1 (2010) Internal Machining and Solid Machined Backing Rings for Circumferential Butt Welds

3581     PFI ES 11 (2003) Permanent Marking of Piping Materials

3582     PFI ES 21 (2010) Internal Machining and Fit-up of GTAW Root Pass Circumferential Butt Welds

3583     PFI ES 22 (2002; R 2006) Color Coding of Piping Materials

3584     PFI ES 3 (2004) Fabricating Tolerances

3585     PFI ES 31 (1992; R 2004) Standard for Protection of Ends of Fabricated Piping Assemblies

3586     PFI ES 35 (1998; R 2003) Nonsymmetrical Bevels and Joint Configurations for Butt Welds

3587     PFI ES 7 (2004) Minimum Length and Spacing for Welded Nozzles

3588     PFI TB1 (2006) Pressure – Temperature Ratings of Seamless Pipe Used in Power Plant Piping Systems

3589     PLASTIC PIPE AND FITTINGS ASSOCIATION (PPFA)

3590     PPFA Fire Man (2010) Firestopping: Plastic Pipe in Fire Resistive Construction

3591     PLASTICS PIPE INSTITUTE (PPI)

3592     PPI TR-21 (2001) Thermal Expansion and Contraction in Plastic Piping Systems

3593     PLUMBING AND DRAINAGE INSTITUTE (PDI)

3594     PDI G 101 (2010) Testing and Rating Procedure for Hydro Mechanical Grease Interceptors with Appendix of Installation and Maintenance

3595     PDI WH 201 (2010) Water Hammer Arresters Standard

3596     PLUMBING AND MECHANICAL CONTRACTORS ASSOCIATION (PMCA)

3597     PPIC Seismic Restraint (1982) Guidelines for Seismic Restraints of Mechanical Systems and Plumbing Systems

3598     PLUMBING-HEATING-COOLING CONTRACTORS NATIONAL ASSOCIATION (PHCC)

3599     NAPHCC NSPC (209) National Standard Plumbing Code

3600     PORCELAIN ENAMEL INSTITUTE (PEI)

3601     PEI 1001 (1996) Specification for Architectural Porcelain Enamel (ALS-100)

3602     PEI CG-3 (2005) Color Guide for Architectural Porcelain Enamel POST-TENSIONING INSTITUTE (PTI)

3603     POST-TENSIONING INSTITUTE (PTI)

3604     PTI DC35.1 (2004) Recommendations for Prestressed Rock and Soil Anchors

3605     PTI M10.2 (2000) Specifications for Unbonded Single Strand Tendons

3606     PTI M55.1 (2012) Specification for Grouting of Post-Tensioned Structures

3607     PTI TAB.1 (2006) Post-Tensioning Manual

3608     PRECAST/PRESTRESSED CONCRETE INSTITUTE (PCI)

3609     PCI BDM (2011) Precast Prestressed Concrete Bridge Design Manual

3610     PCI JR-382 (1993) PCI Journal: Recommended Practice for Design, Manufacture and Installation of Prestressed Concrete Piling

3611     PCI MNL-116 (1999) Manual for Quality Control for Plants and Production of Structural Precast Concrete Products, 4th Edition

3612     PCI MNL-117 (1996) Manual for Quality Control for Plants and Production of Architectural Precast Concrete Products, 3rd Edition

3613     PCI MNL-120 (2010) PCI Design Handbook – Precast and Prestressed Concrete, 6th Edition

3614     PCI MNL-122 (2007) Architectural Precast Concrete, 3rd Edition

3615     PCI MNL-124 (2011) Design for Fire Resistance of Precast Prestressed Concrete, Third Edition

3616     PCI MNL-128 (2001) Recommended Practice for Glass Fiber Reinforced Concrete Panels, 4th Edition

3617     PUGET SOUND CLEAN AIR AGENCY (PSCAA) PSCAA Regulation Regulation I, II, and III

3618     REDWOOD INSPECTION SERVICE (RIS) OF THE CALIFORNIA REDWOOD ASSOCIATION (CRA)

3619     RIS Grade Use (1998) Redwood Lumber Grades and Uses

3620     RESEARCH COUNCIL ON STRUCTURAL CONNECTIONS (RCSC)

3621     RCSC S348 (2009) RCSC Specification for Structural Joints Using ASTM A325 or A490 Bolts

3622     RUBBER MANUFACTURERS ASSOCIATION (RMA)

3623     RMA IP-1 (2011) Conveyor and Elevator Belt Handbook; 3rd Edition

3624     RMA IP-2 (2009) Hose Handbook; 8th Edition

3625     RMA IP-20 (2007) Specifications for Drives Using Classical

3626     V-Belts and Sheaves. Specifications for A, B, C, and D Cross Sections

3627     RMA IP-22 (2007) Specifications for Drives Using Narrow

3628     V-Belts and Sheaves (Joint RMA/MPTA), 4th Edition

3629     SCIENTIFIC CERTIFICATION SYSTEMS (SCS)

3630     SCS Scientific Certification Systems (SCS)Indoor Advantage

3631     SCS SP-01 (2000) Environmentally Preferable Product Specification for Architectural and Anti-Corrosive

3632     SCIENTIFIC EQUIPMENT AND FURNITURE ASSOCIATION (SEFA)

3633     SEFA 7 (1996) Recommended Practice for Laboratory and Hospital Fixtures

3634     SCREEN MANUFACTURERS ASSOCIATION (SMA)

3635     SMA 1004 (1987; R 1998) Aluminum Tubular Frame Screens for Windows

3636     SEMICONDUCTOR EQUIPMENT AND MATERIALS INTERNATIONAL (SEMI)

3637     SEMI C28 (2011) Specifications for Hydrofluoric Acid

3638     SEMI C35 (2008) Specifications and Guidelines for Nitric Acid

3639     SHEET METAL AND AIR CONDITIONING CONTRACTORS’ NATIONAL ASSOCIATION (SMACNA)

3640     ANSI/SMACNA 008 (2007) IAQ Guidelines for Occupied Buildings Under Construction, 2nd Edition

3641     SMACNA 1378 (1995) Thermoplastic Duct (PVC) Construction Manual, 2nd Edition

3642     SMACNA 1403 (2008) Accepted Industry Practice for Industrial Duct Construction, 2nd Edition

3643     SMACNA 1429 (1994) HVAC Systems Commissioning Manual, 1st Edition

3644     SMACNA 1520 (1999) Round Industrial Duct Construction Standards, 3rd Edition

3645     SMACNA 1767 (2001) Kitchen Ventilation Systems & Food Service Equipment Fabrication & Installation Guidelines, 1st Edition

3646     SMACNA 1780 (2002) HVAC Systems – Testing, Adjusting and Balancing, 3rd Edition

3647     SMACNA 1793 (2012) Architectural Sheet Metal Manual, 7th Edition

3648     SMACNA 1819 (2002) Fire, Smoke and Radiation Damper Installation Guide for HVAC Systems, 5th Edition

3649     SMACNA 1858 (2004) HVAC Sound And Vibration Manual – First Edition

3650     SMACNA 1884 (2003) Fibrous Glass Duct Construction Standards, 7th Edition

3651     SMACNA 1922 (2004) Rectangular Industrial Duct Construction Standards, 2nd Edition

3652     SMACNA 1966 (2005) HVAC Duct Construction Standards Metal and Flexible, 3rd Edition

3653     SMACNA 1972 CD (2012) HVAC Air Duct Leakage Test Manual – 2nd Edition

3654     SMACNA 1981 (2008) Seismic Restraint Manual Guidelines for Mechanical Systems, 3rd Edition

3655     SMACNA 1987 (2006) HVAC Duct Systems Inspection Guide, 3rd Edition

3656     SINGLE PLY ROOFING INDUSTRY (SPRI)

3657     ANSI/SPRI RD-1 (2009) Performance Standard for Retrofit Drains

3658     ANSI/SPRI/FM 4435/ES-1 (2011) Wind Design Standard for Edge Systems Used with Low Slope Roofing Systems

3659     SPRI RP-4 (2008) Wind Design Standard for Ballasted Single-Ply Roofing Systems

3660     SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)

3661     SAE AMS 2480 (2009; Rev H) Phosphate Treatment, Paint, Base

3662     SAE AMS 3216 (2005; Rev G) Fluorocarbon (FKM) Rubber High-Temperature – Fluid Resistant Low Compression Set 70 To 80

3663     SAE AMS 3779 (1990; Rev A; R 1994) Tape Adhesive, Pressure Sensitive Thermal Radiation Resistant, Aluminum Foil/Glass Cloth

3664     SAE AMS-C-22542 (2012; Rev A; Stabilized (S) 2012) Cleaning Compound, High Pressure Cleaner, Liquid

3665     SAE AMS-C-6183 (2013; Rev A) Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets

3666     SAE AMS-P-5315 (2013, Rev B) Butadiene – Acrylonitrile (NBR) Rubber For Fuel-Resistant Seals 60 To 70

3667     SAE AMS-QQ-A-200/8 (1997; R 2012) Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded

3668     SAE AMS2460 (2013; Rev A) Plating, Chromium

3669     SAE AMS3275 (2009; Rev C) Sheet, Acrylonitrile Butadiene (NBR) Rubber and Non-Asbestos Fiber Fuel and Oil Resistant

3670     SAE AMS3611 (2011; Rev E; Stabilized (S) 2011) Plastic Sheet, Polycarbonate General Purpose

3671     SAE AMS5351 (1987; Rev F; R 2006) Steel Castings, Sand, Corrosion and Moderate Hear Resistant, 13Cr, Normalized and Tempered

3672     SAE AMS7276 (2001; Rev H) Rings, Sealing Fluorocarbon (FKM) Rubber High-Temperature Fluid Resistant Low Compression Set 70 to 80

3673     SAE ARP892 (1965; R 1994) DC Starter-Generator, Engine

3674     SAE AS4841 (2012; Rev A) Fittings, 37 Degree Flared, Fluid Connection

3675     SAE AS4842 (1995; R 2004) Fittings and Bosses, Pipe Threaded, Fluid Connection

3676     SAE AS4842/1 (1995; R 2007) Fittings, 37 Degree Flared to Pipe Threaded, Fluid Connection

3677     SAE AS4843 (1995; R 2007) Fittings, Beaded, Fluid Connection

3678     SAE AS4843/1 (1995; R 2007) Fittings, Beaded to 37 Degree Flared, Fluid Connection

3679     SAE AS4843/2 (1995; R 2007) Fittings, Beaded to Pipe Threaded, Fluid Connection

3680     SAE AS4875 (1995; R 2007) Fittings, Straight Threaded Boss, Fluid Connection

3681     SAE AS4875/1 (1995; R 2007) Fittings, Straight Thread Boss or Flanged to 37 Degree Flared, Fluid Connection

3682     SAE AS4875/2 (1995; R 2007) Fittings, Flanged to Beaded, Fluid Connection

3683     SAE AS5756/6 (2013; Rev A; Stabilized (S) 2013) Cable, 3-Phase Power, Electric Portable, Multiconductor, 90 Degree C, 600V, Ozone Resistant, Split Phase

3684     SAE AS5877 (2007; Rev A) Aircraft Pressure Refueling Nozzle

3685     SAE AS598 (2012) Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems

3686     SAE J1019 (2007) Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assemblies

3687     SAE J1165 (1979; R 1986) Reporting Cleanliness Levels of Hydraulic Fluids

3688     SAE J1508 (2009) Hose Clamp Specifications

3689     SAE J1545 (2005) Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim

3690     SAE J1677 (2009) Tests and Procedures for Steel and Copper Nickel Tubing

3691     SAE J1995 (2014) Engine Power Test Code – Spark Ignition and Compression Ignition – Gross Power Rating

3692     SAE J200 (2011) Classification System for Rubber Materials

3693     SAE J429 (2013) Mechanical and Material Requirements for Externally Threaded Fasteners

3694     SAE J513 (1999) Refrigeration Tube Fittings – General Specifications

3695     SAE J514 (2012) Hydraulic Tube Fittings

3696     SAE J517 (2013) Hydraulic Hose

3697     SAE J518-1 (2013) Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61)

3698     SAE J534 (2008) Lubrication Fittings

3699     SAE J537 (2011) Storage Batteries

3700     SAE J636 (2012) V-Belts and Pulleys

3701     SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS (SMPTE)

3702     SMPTE 170M (2004) Television – Composite Analog Video Signal -

3703     NTSC for Studio Applications

3704     SOLAR RATING AND CERTIFICATION CORPORATION (SRCC)

3705     SRCC CSCWHSR (ongoing online) SRCC Ratings Pages (http://www.solar-rating.org/ratings/index.html)

3706     SRCC OG-100 (1995) Operating Guidelines for Certifying Solar Collectors

3707     SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT (SCAQMD)

3708     SCAQMD Rule 1168 (1989; R 2005) Adhesive and Sealant Applications

3709     SOUTHERN CYPRESS MANUFACTURERS ASSOCIATION (SCMA)

3710     SCMA Spec (1986; Supple. No. 1, Aug 1993) Standard Specifications for Grades of Southern Cypress

3711     SOUTHERN PINE INSPECTION BUREAU (SPIB)

3712     SPIB 1003 (2002) Standard Grading Rules for Southern Pine Lumber

3713     SPRAY POLYURETHANE FOAM ALLIANCE (SPFA)

3714     SPFA AY-104 (1994; R 2008) Spray Polyurethane Foam Systems for New and Remedial Roofing

3715     STATE OF CALIFORNIA DEPARTMENT OF TRANSPORTATION (CALTRANS)

3716     CTM 526 (2002) Operation of California Profilograph and Evaluation of Profiles

3717     STATE OF MARYLAND CODE OF MARYLAND REGULATIONS (COMAR)

3718     COMAR 26.13 (1988) Chapters .01- .13, Disposal of Controlled Hazardous Substances

3719     STATE OF VIRGINIA ADMINISTRATIVE CODE (VAC)

3720     16 VAC 25-20-30 Title 16, Agency 25, Chapter 20, Section 30:Notification and Permit Fee16 VAC 25-35 Title 16, Agency 25, Chapter 35: RegulationConcerning Certified Lead Contractor’sNotification, Lead Project Permits And Permit Fees18 VAC 15-30 Title 18, Agency 15, Chapter 30: VirginiaLead-Based Paint Activities Regulations9 VAC 20-60 Title 9, Agency 20, Chapter 60: Hazardous WasteManagement Regulations9 VAC 20-80 Title 9, Agency 20, Chapter 80: Solid WasteManagement Regulations9 VAC 25-840 Title 9, Agency 25, Chapter 840: Erosion AndSediment Control Regulations9 VAC 25-850 Title 9, Agency 25, Chapter 850: Erosion AndSediment Control And Stormwater ManagementCertification Regulations9 VAC 25-870 Title 9, Agency 25, Chapter 870: VirginiaStormwater Management Program (Vsmp) Regulation

3721     STEEL DECK INSTITUTE (SDI)

3722     SDI 31 (2007) Design Manual for Composite Decks, Form Decks, and Roof Decks

3723     SDI DDMO3 (2004; Errata 2006; Add 2006) Diaphragm Design Manual; 3rd Edition

3724     SDI DDP (1987; R 2000) Deck Damage and Penetrations

3725     SDI MOC2 (2006) Manual of Construction with Steel Deck

3726     STEEL DOOR INSTITUTE (SDI/DOOR)

3727     SDI/DOOR 111 (2009) Recommended Selection and Usage Guide for Standard Steel Doors, Frames and Accessories

3728     SDI/DOOR 113 (2001; R2006) Standard Practice for Determining the Steady State Thermal Transmittance of Steel Door and Frame Assemblies

3729     SDI/DOOR A250.11 (2001) Recommended Erection Instructions for Steel Frames

3730     SDI/DOOR A250.3 (2007; R 2011) Test Procedure and Acceptance Criteria for Factory Applied Finish Painted Steel Surfaces for Steel Doors and Frames

3731     SDI/DOOR A250.4 (2011) Test Procedure and Acceptance Criteria for Physical Endurance for Steel Doors and Hardware

3732     SDI/DOOR A250.6 (2003; R2009) Recommended Practice for Hardware Reinforcing on Standard Steel Doors and Frames

3733     SDI/DOOR A250.8 (2003; R2008) Recommended Specifications for Standard Steel Doors and Frames

3734     STEEL JOIST INSTITUTE (SJI)

3735     SJI LOAD TABLES (2005; Errata 1 2006; Errata 2 2007; Errata 3 2007) 42nd Edition Catalog of Standard Specifications Load Tables and Weight Tables for Steel Joists and Joist Girders

3736     SJI MANUAL (2009) 80 Years of Open Web Steel Joist Construction

3737     SJI TD 10 (2003) Technical Digest No. 10 – Design of Fire Resistive Assemblies with Steel Joists

3738     SJI TD 11 (2007) Technical Digest No. 11 – Design Of Lateral Load Resisting Frames Using Steel Joists And Joist Girders

3739     SJI TD 8 (2008) Technical Digest No. 8 – Welding Of Open-Web Steel Joists And Joist Girders; 2nd Edition

3740     SJI TD 9 (2008) Technical Digest No. 9 – Handling and Erection of Steel Joists and Joist Girders; 3rd Edition

3741     STEEL TANK INSTITUTE (STI)

3742     STI 010-50-1000 (2011) Specification and Manual for External Corrosion Protection of Underground Steel Storage Tanks

3743     STI 020-50-1000 (2010) ACT-100 Specification for External Corrosion Protection of FRP Composite Steel USTs

3744     STI 700-50-5007 (2010) Installation Instructions for Shop Fabricated Aboveground Tanks for Flammable,

3745     STI F911 (1998; Reissued 2009) Standard for Diked Aboveground Storage Tanks

3746     STEEL WINDOW INSTITUTE (SWI)

3747     SWI AGSW (2002) Architect’s Guide to Steel Windows

3748     SWI SWS (2005) Steel Window Specifications

3749     TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY (TAPPI)

3750     TAPPI T403 OM (2010) Bursting Strength of Paper

3751     TAPPI T404 CM (1992) Tensile Breaking Strength and Elongation of Paper and Paperboard (Using Pendulum-Type Tester)

3752     TAPPI T410 OM (2013) Grammage of Paper and Paperboard (Weight Per Unit Area)

3753     TAPPI T456 OM (2010) Tensile Breaking Strength of Water-Saturated Paper and Paperboard (“Wet Tensile Strength”)

3754     TAPPI T487 PM (1999) Fungus Resistance of Paper and Paperboard

3755     TAPPI T803 OM (2010) Puncture Test of Container Board TELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)

3756     TELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)

3757     EIA/TIA 455-165A (1993) Standard for Mode-Field Diameter Measurement by Near-Field Scanning Technique

3758     TIA-1152 (2009) Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

3759     TIA-222 (2005g; Adm 1 2007; Adm 2 2009; R 2012; R 2013) Structural Standards for Antenna Supporting Structures and Antennas

3760     TIA-232 (1997f; R 2012) Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange

3761     TIA-329 (2003c) Minimum Standards for Communication Antennas – Base Station Antennas

3762     TIA-374-A (2002) Land Mobile Selective Signaling Standard

3763     TIA-455-104 (1993a; R 2013) Standard for FOTP-104 Fiber Optic Cable Cyclic Flexing Test

3764     TIA-455-107 (1999a) FOTP-107 Determination of Component Reflectance or Link/System Return Loss using a Loss Test Set

3765     TIA-455-13 (1996a; R 2012) FOTP-13 Visual and Mechanical Inspection of Fiber Optic Components, Devices, and Assemblies

3766     TIA-455-175 (2003b) FOTP-175 IEC-60793-1-42: Measurement Methods and Test Procedures – Chromatic Dispersion

3767     TIA-455-177 (2003b) FOTP-177 IEC-60793-1-43: Measurement Methods and Test Procedures – Numerical Aperture

3768     TIA-455-21 (1988a; R 2012) FOTP-21 – Mating Durability of Fiber Optic Interconnecting Devices

3769     TIA-455-33 (2005b; R 2013) Optical Cable Tensile Loading and Bending Test

3770     TIA-455-46A (1990) FOTP-46 Spectral Attenuation Measurement for Long-Length, Graded-Index Optical Fibers

3771     TIA-455-47B (1992) FOTP-47 Output Far Field Radiation Pattern Measurement

3772     TIA-455-58 (2001b) FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers

3773     TIA-455-78-B (2002) FOTP-78 Optical Fibres – Part 1-40: Measurement Methods and Test Procedures – Attenuation

3774     TIA-455-82 (1992b) FOTP-82 Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable

3775     TIA-455-91 (1986; R 1996) FOTP-91 Fiber Optic Cable Twist-Bend Test

3776     TIA-472D000 (2007b) Fiber Optic Communications Cable for Outside Plant Use

3777     TIA-485 (1998a; R 2012) Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems

3778     TIA-492AAAA (2009b) 62.5-um Core Diameter/125-um Cladding Diameter Class 1a Graded-Index Multimode Optical Fibers

3779     TIA-492AAAB (2009a) 50-Um Core Diameter/125-Um Cladding Diameter Class IA Graded-Index Multimode Optical Fibers

3780     TIA-492CAAA (1998; R 2002) Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers

3781     TIA-492E000 (1996; R 2002) Sectional Specification for Class IVd Nonzero-Dispersion Single-Mode Optical Fibers for the 1550 nm Window

3782     TIA-526-14 (2010b) OFSTP-14A Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant

3783     TIA-526-7 (2002; R 2008) OFSTP-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant

3784     TIA-568-C.0 (2009; Add 1 2010; Add 2 2012) Generic Telecommunications Cabling for Customer Premises

3785     TIA-568-C.1 (2009; Add 2 2011; Add 1 2012) Commercial Building Telecommunications Cabling Standard

3786     TIA-568-C.2 (2009; Errata 2010) Balanced Twisted-Pair Telecommunications Cabling and Components Standards

3787     TIA-568-C.3 (2008; Add 1 2011) Optical Fiber Cabling Components Standard

3788     TIA-569 (2012c; Addendum 1 2013; Errata 2013) Commercial Building Standard for Telecommunications Pathways and Spaces

3789     TIA-570 (2012c) Residential Telecommunications Infrastructure Standard

3790     TIA-590 (1997a) Standard for Physical Location and Protection of Below Ground Fiber Optic Cable Plant

3791     TIA-603 (2010d) Land Mobile FM or PM – Communications Equipment – Measurement and Performance Standards

3792     TIA-606 (2012b) Administration Standard for the Telecommunications Infrastructure

3793     TIA-607 (2011b) Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises

3794     TIA-758 (2012b) Customer-Owned Outside Plant Telecommunications Infrastructure Standard

3795     TIA/EIA-455 (1998b) Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic

3796     TIA/EIA-455-171 (2001a) FOTP-171 – Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single-Mode Optical Fiber Cable Assemblies

3797     TIA/EIA-455-204 (2000) Standard for Measurement of Bandwidth on Multimode Fiber

3798     TIA/EIA-455-25 (2002c; R 2013) FOTP-25 Impact Testing of Optical Fiber Cables

3799     TIA/EIA-455-41 (1993a; R 2013) FOTP-41 Compressive Loading Resistance of Fiber Optic Cables

3800     TIA/EIA-455-81 (2000b) FOTP-81 Compound Flow (Drip) Test for Filled Fiber Optic Cable

3801     TIA/EIA-455-88 (2001) FOTP-88 Fiber Optic Cable Bend Test

3802     TIA/EIA-472DAAA (1993) Detail Specification for All Dielectric Fiber Optic Communications Cable for Outside Plant Use Containing Class 1a 62.5 Um Core Diameter/125 um Cladding Diameter/250 um Coating Diameter Fiber(s).

3803     TIA/EIA-4750000-C (1996) Generic Specifications for Fiber Optic Connectors (ANSI)

3804     TIA/EIA-598 (2005c) Optical Fiber Cable Color Coding

3805     TIA/EIA-604-10 (2002a) FOCIS 10 Fiber Optic Connector Intermateability Standard – Type LC

3806     TIA/EIA-604-12 (2000) FOCIS 12 Fiber Optic Connector Intermateability Standard Type MT-RJ

3807     TIA/EIA-604-2 (2004b; R 2014) FOCIS 2 Fiber Optic Connector Intermateability Standard

3808     TIA/EIA-604-3 (2004b; R 2014) Fiber Optic Connector Intermateability Standard (FOCIS), Type SC and SC-APC, FOCIS-3

3809     THE INTERNET ENGINEERING TASK FORCE (IETF)

3810     IETF RFC 4361 (2006) Node-specific Client Identifiers for Dynamic Host Configuration Protocol Version Four (DHCPv4)

3811     IETF RFC 5246 (2008) The Transport Layer Security (TLS) Protocol Version 1.2

3812     IETF RFC 5545 (2009) Internet Calendaring and Scheduling Core Object Specification (iCalendar)

3813     RFC 821 (2001) Simple Mail Transfer Protocol (SMTP)

3814     THE SOCIETY FOR PROTECTIVE COATINGS (SSPC) CS 23.00/AWS C2.23M/NACE (#210203) Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

3815     SSPC 7/NACE No.4 (2007; E 2004) Brush-Off Blast Cleaning

3816     SSPC AB 1 (2013) Mineral and Slag Abrasives

3817     SSPC AB 2 (1996; E 2004) Cleanliness of Recycled Ferrous Metallic Abrasive

3818     SSPC AB 3 (2003; E 2004) Ferrous Metallic Abrasive

3819     SSPC Guide 12 (1998; E 2004) Guide for Illumination of Industrial Painting Projects

3820     SSPC Guide 6 (2004) Guide for Containing Surface Preparation Debris Generated During Paint Removal Operations

3821     SSPC Guide 7 (2004; E 2004) Guide to the Disposal of Lead-Contaminated Surface Preparation Debris

3822     SSPC PA 1 (2000; E 2004) Shop, Field, and Maintenance Painting of Steel

3823     SSPC PA 2 (2012) Measurement of Dry Coating Thickness With Magnetic Gages

3824     SSPC PA Guide 3 (1982; E 1995) A Guide to Safety in Paint Application

3825     SSPC PA Guide 5 (2002; E 2004) Guide to Maintenance Coating of Steel Structures in Atmospheric Service

3826     SSPC PS 10.01 (1982; E 2004) Hot-Applied Coal Tar Enamel Painting System

3827     SSPC PS 11.01 (1982; E 2004) Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System

3828     SSPC PS 12.01 (2002; E 2004) One Coat Zinc-Rich Painting System

3829     SSPC PS 13.01 (1982; E 2004) Epoxy Polyamide Painting System

3830     SSPC PS 26.00 (2000; E 2004) Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based (Type I for use over Blast Cleaned Steel and Type II for use over Hand Cleaned Steel)

3831     SSPC PS 4.04 (1982; E 2004) Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)

3832     SSPC PS 9.01 (1982; E 2004) Cold-Applied Asphalt Mastic Painting System with Extra-Thick Film

3833     SSPC PS Guide 17.00 (1982; E 2004) Guide for Selecting Urethane Painting Systems

3834     SSPC Paint 104 (1982; E 2004) White or Tinted Alkyd Paint

3835     SSPC Paint 11 (1992; E 2000) Paint Specification No. 11Red Iron Oxide, Zinc Chromate, Raw Linseed Oil and Alkyd Primer

3836     SSPC Paint 15 (1999; E 2004) Steel Joist Shop Primer

3837     SSPC Paint 16 (2006) Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint

3838     SSPC Paint 18 (1982; E 2004) Chlorinated Rubber Intermediate Coat Paint

3839     SSPC Paint 20 (2002; E 2004) Zinc-Rich Primers (Type I, Inorganic, and Type II, Organic)

3840     SSPC Paint 21 (1982; E 2004) White or Colored Silicone Alkyd Paint (Type I, High Gloss and Type II, Medium Gloss)

3841    SSPC Paint 22 (1982; E 2004) Paint Specification No. 22 Epoxy-Polyamide Paints (Primer, Intermediate, and Topcoat)

3842     SSPC Paint 25 (1997; E 2004) Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel, Type I and Type II

3843     SSPC Paint 27 (1982; E 2004) Basic Zinc Chromate-Vinyl Butyral Wash Primer

3844     SSPC Paint 28 (1991; E 2004) Water-Borne Epoxy Primer for Steel Surfaces

3845     SSPC Paint 29 (2002; E 2004) Zinc Dust Sacrificial Primer, Performance-Based

3846     SSPC Paint 33 (2006) Coal Tar Mastic, Cold-Applied

3847     SSPC Paint 36 (2006) Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-Based

3848     SSPC Paint 38 (2006) Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat, Performance-Based

3849     SSPC Paint 40 (2007) Zinc-Rich Moisture-Cure Polyurethane Primer, Performance-Based

3850     SSPC Paint 41 (2008) Moisture-Cured Polyurethane Primer or Intermediate Coat, Micaceous Iron Oxide Reinforced, Performance-Based

3851     SSPC Painting Manual (2002) Good Painting Practice, Steel Structures Painting Manual, Volume 1

3852     SSPC QP 1 (1998; E 2004) Standard Procedure for Evaluating Painting Contractors (Field Application to Complex Industrial Structures)

3853     SSPC QP 2 (2009) Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures)

3854     SSPC QP 3 (2010) Standard Procedure for Evaluating Qualifications of Shop Painting Applicators

3855     SSPC QP 5 (1999; E 2004) Standard Procedure for Evaluating the Qualifications of Coating and Lining Inspection Companies

3856     SSPC QS 1 (2004) Standard Procedure for Evaluating a Contractor’s Advanced Quality Management System

3857     SSPC SP 1 (1982; E 2004) Solvent Cleaning

3858     SSPC SP 10/NACE No. 2 (2007) Near-White Blast Cleaning

3859     SSPC SP 11 (2012) Power Tool Cleaning to Bare Metal

3860     SSPC SP 12/NACE No.5 (2002) Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating

3861     SSPC SP 2 (1982; E 2000; E 2004) Hand Tool Cleaning

3862     SSPC SP 3 (1982; E 2004) Power Tool Cleaning

3863     SSPC SP 5/NACE No. 1 (2007) White Metal Blast Cleaning

3864     SSPC SP 6/NACE No.3 (2007) Commercial Blast Cleaning

3865     SSPC SP 8 (1982; E 2004) Pickling

3866     SSPC SP COM (2004) Surface Preparation Commentary for Steel and Concrete Substrates

3867     SSPC SSPM (2010) SSPC Painting Manual, Volume 2, Systems and Specifications

3868     SSPC VIS 1 (2002; E 2004) Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning

3869     SSPC VIS 3 (2004) Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning

3870     SSPC VIS 4/NACE VIS 7 (1998; E 2000; E 2004) Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting

3871     SSPC-TU 2/NACE 6G197 (1997) Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment

3872     THE SOCIETY OF CABLE TELECOMMUNICATIONS ENGINEERS (SCTE)

3873     ANSI/SCTE 77 (2013) Specification for Underground Enclosure Integrity

3874     THE WOOLMARK COMPANY (WBI) Woolmark (1964) Certification for Use of 100 Percent Wool

3875     TILE COUNCIL OF NORTH AMERICA (TCNA)

3876     TCNA Hdbk (2013) Handbook for Ceramic, Glass, and Stone Tile Installation

3877     TREE CARE INDUSTRY ASSOCIATION (TCIA)

3878     TCIA A300P1 (2008) ANSI A300 Part1: Tree Care Operations – Trees, Shrubs and Other Woody Plant Maintenance Standard Practices – Pruning

3879     TCIA Z133.1 (2006) American National Standard for Arboricultural Operations – Pruning, Repairing, Maintaining, and Removing Trees, and Cutting Brush

3880     TRIDIUM, INC (TRIDIUM) Niagara Framework (2012) NiagaraAX User’s Guide Tridium Open NiCS (2005) Understanding the NiagaraAX Compatibility Statement (NiCS)

3881     TRUSS PLATE INSTITUTE (TPI)

3882     TPI 1 (2007; R 2006) National Design Standard for Metal Plate Connected Wood Truss Construction; Commentary and Appendices

3883     TPI HIB (1991) Commentary and Recommendations for Handling, Installing and Bracing Metal Plate Connected Wood Trusses

3884     TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION (TEMA)

3885     TEMA Stds (2007) Standards of the Tubular Exchange Manufacturers Association (TEMA)

3886     TURFGRASS PRODUCERS INTERNATIONAL (TPI)

3887     TPI GSS (1995) Guideline Specifications to Turfgrass Sodding

3888     U.S. AIR FORCE (USAF)

3889     AF 48-1 (2005, Change 2009) Respiratory Protection Program

3890     AF 91-501 (2004) Air Force Consolidated Occupational Safety Standard

3891     AF ETL 11-1 (2011) Civil Engineer Industrial Control System Information Assurance Compliance

3892     AFI 32-1053 (2009) Integrated Pest Management Program

3893     AFI 32-1065 (1998) Grounding Systems

3894     AFI 91-202 (1998; Change 2010) US Air Force Mishap Prevention Program AFOSHSTD 91-38 (1997) Hydrocarbon Fuels – General

3895     U.S. ARMY (DA)

3896     DA AR 200-1 (2007) Environmental Protection and Enhancement

3897     DA AR 25-2 (2007; RAR 2009) Information Assurance

3898     DA AR 55-80 (2003) DOD Transportation Engineering Program

3899     DA PAM 385-64 (2011) Ammunition and Explosives Safety Standards

3900     U.S. ARMY CENTER FOR HEALTH PROMOTION AND PREVENTIVE MEDICINE (USACHPPM)

3901     USACHPPM Protocol (1993) Sampling Protocol Building Demolition Debris and Buildings Painted with Lead-Based Paint

3902     U.S. ARMY CORPS OF ENGINEERS (USACE)

3903     CED TR GL-85-3 (1985) Geotechnical Descriptions of Rock and Rock Masses

3904     CERL TR 99/104 (1999) Greaseless Bushings for Hydropower Applications: Program, Testing, and Results

3905     CERL Tech Rep FM-95/05 (1994) Field Evaluation of Cathodic Protection Systems Using Ceramic-Coated Anodes for Lock and Dam Gates

3906     COE CRD-C 100 (1975) Method of Sampling Concrete Aggregate and Aggregate Sources, and Selection of Material for Testing

3907     COE CRD-C 104 (1980) Method of Calculation of the Fineness Modulus of Aggregate

3908     COE CRD-C 112 (1969) Method of Test for Surface Moisture in Aggregate by Water Displacement

3909     COE CRD-C 114 (1997) Test Method for Soundness of Aggregates by Freezing and Thawing of Concrete Specimens

3910     COE CRD-C 130 (2001) Standard Recommended Practice for Estimating Scratch Hardness of Coarse Aggregate Particles

3911     COE CRD-C 143 (1962) Specifications for Meters for Automatic Indication of Moisture in Fine Aggregate

3912     COE CRD-C 144 (1992) Standard Test Method for Resistance of Rock to Freezing and Thawing

3913     COE CRD-C 148 (1969) Method of Testing Stone for Expansive Breakdown on Soaking in Ethylene Glycol

3914     COE CRD-C 164 (1992) Standard Test Method for Direct Tensile Strength of Cylindrical Concrete or Mortar Specimens

3915     COE CRD-C 169 (1997) Standard Test Method for Resistance of Rock to Wetting and Drying

3916     COE CRD-C 171 (1995) Standard Test Method for Determining Percentage of Crushed Particles in Aggregate

3917     COE CRD-C 300 (1990) Specifications for Membrane-Forming Compounds for Curing Concrete

3918     COE CRD-C 39 (1981) Test Method for Coefficient of Linear Thermal Expansion of Concrete

3919     COE CRD-C 400 (1963) Requirements for Water for Use in Mixing or Curing Concrete

3920     COE CRD-C 513 (1974) Corps of Engineers Specifications for Rubber Waterstops

3921     COE CRD-C 521 (1981) Standard Test Method for Frequency and Amplitude of Vibrators for Concrete

3922     COE CRD-C 525 (1989) Corps of Engineers Test Method for Evaluation of Hot-Applied Joint Sealants for Bubbling Due to Heating

3923     COE CRD-C 53 (2001) Test Method for Consistency of No-Slump Concrete Using the Modified Vebe Apparatus

3924     COE CRD-C 548 (1988) Standard Specification for Jet-Fuel and Heat-Resistant Preformed Polychloroprene Elastomeric Joint Seals for Rigid Pavements

3925     COE CRD-C 55 (1992) Test Method for Within-Batch Uniformity of Freshly Mixed Concrete

3926     COE CRD-C 572 (1974) Corps of Engineers Specifications for Polyvinylchloride Waterstops

3927     COE CRD-C 61 (1989A) Test Method for Determining the Resistance of Freshly Mixed Concrete to Washing Out in Water

3928     COE CRD-C 649 (1995) Standard Test Method for Unit Weight, Marshall Stability, and Flow of Bituminous Mixtures

3929     COE CRD-C 650 (1995) Standard Method for Density and Percent Voids of Compacted Bituminous Paving Mixtures

3930    COE CRD-C 662 (2009) Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials, Lithium Nitrate Admixture and Aggregate (Accelerated Mortar-Bar Method)

3931     COE CRD-C 94 (1995) Corps of Engineers Specification for Surface Retarders

3932     EM 1110-1-1906 (1996) Engineering and Design — Soil Sampling

3933     EM 1110-1-3500 (1995) Engineering and Design — Chemical Grouting

3934     EM 1110-1-4006 (1998) Engineering and Design — Removal of Underground Storage Tanks (USTs)

3935     EM 1110-2-1424 (1999; Change 1-2006; Change 2-2007) Engineering and Design — Lubricants and Hydraulic Fluids

3936     EM 1110-2-1601 (1991; 1994 Change 1) Engineering and Design — Hydraulic Design of Flood Control Channels

3937     EM 1110-2-1906 (1986) Laboratory Soils Testing

3938     EM 1110-2-1913 (2000) Engineering and Design; Design and Construction of Levees

3939     EM 1110-2-2704 (2004) Engineering and Design — Cathodic Protection Systems for Civil Works Structures

3940     EM 1110-2-2901 (1997) Engineering and Design — Tunnels and Shafts in Rock

3941     EM 1110-2-3506 (1984) Engineering and Design — Grouting Technology

3942     EM 200-1-1 (1994) Environmental Quality — Validation of Analytical Chemistry Laboratories

3943     EM 200-1-3 (2001) Engineering and Design — Requirements for the Preparation of Sampling and Analysis Plans

3944     EM 200-1-6 (1997) Environmental Quality — Chemical Quality Assurance for HTRW Projects

3945     EM 200-1-7 (2001) Environmental Quality – Performance Evaluation (PE) Program

3946     EM 385-1-1 (2008; Errata 1-2010; Changes 1-3 2010; Changes 4-6 2011; Change 7 2012) Safety and Health Requirements Manual

3947     EP 1110-1-11 (1992; Change 1 1997) Engineering and Design — Asbestos Abatement Guideline Detail Sheets

3948     EP 1110-1-19 (2001) A Guide to Preparing and Reviewing Remedial Action Reports of Cost and Performance

3949     EP 310-1-6a (2006) Sign Standards Manual, VOL 1

3950     EP 310-1-6b (2006) Sign Standards Manual, VOL 2, Appendices

3951     EP 415-1-266 (2000) Resident Engineer Management Guide (REMG) for Hazardous, Toxic, and Radioactive Waste (HTRW) Projects

3952     EP 1110-1-8 (2009) Construction Equipment Ownership and Operating Expense Schedule

3953     ER 1-1-11 (1995) Administration — Progress, Schedules, and Network Analysis Systems

3954     ER 1110-1-12 (2006; Change 1) Engineering and Design — Quality Management

3955     ER 1110-1-263 (1998) Engineering and Design — Chemical Data Quality Management for Hazardous, Toxic, Radioactive Waste Remedial Activities

3956     ER 1110-3-1301 (1999) Engineering and Design — Cost Engineering Policy Requirements for Hazardous, Toxic Radioactive Waste (HTRW) Cost Engineering

3957     ER 385-1-95 (2007; Errata 2007) Safety — Safety and Health Requirements for Munitions and Explosives of Concern (MEC) Operations

3958     PWTB 420-49-5 (1998) Industrial Water Treatment Procedures

3959     TR-06-X (2006; Supplement 2009) A/E/C (Architectural, Engineering, and Construction) CADD Standard – Release 3.0

3960     TR-EL-97-8 (1997) Bioengineering for Streambank Erosion Control; Report 1, Guidelines

3961     WETLANDS DELINEATION MANU(A1L987) Corps of Engineers Wetlands Delineation Manual

3962     U.S. ARMY ENVIRONMENTAL CENTER (USAEC)

3963     USAEC CETHA-TS-CR-93043 (1993) Windrow Composting Demonstration for Explosives-Contaminated Soils at the Umatilla Depot Activity (NTIS PB95-200119)

3964     USAEC SFIM-AEC-ET-CR-9618(41996) Cost Report: Windrow Composting to Treat Explosives-Contaminated Soils at Umatilla Army Depot Activity (UMDA) (NTIS AD-A318001)

3965     USAEC SFIM-AEC-ET-CR-9705(31997) Federal Remediation Technologies Screening Matrix and Reference Guide, Third Edition (NTIS PB98-108590)

3966     U.S. Code (USC) 10 USC 6011 Navy Regulations 8 USC 1101 Definitions

3967     USC Title 42 The Public Health and Welfare

3968     U.S. DEFENSE INTELLIGENCE AGENCY (DIA)

3969     DIA DCID 6/9 (2002) Director of Central Intelligence Directive No. 6/9

3970     U.S. DEFENSE LOGISTICS AGENCY (DLA)

3971     DLA 4145.25 (June 2000) Storage and Handling of Liquefied and Gaseous Compressed Gases and Their Full and Empty Cylinders

3972     DLA J4 Handbook (Part IV) Federal Supply Class Assignments (Numeric and Alphabetic Listing)

3973     DLA Lock DOD Lock Program; http://www.dscp.dla.mil/gi/locks/

3974     U.S. DEPARTMENT OF AGRICULTURE (USDA)

3975     DOA SSIR 42 (1996) Soil Survey Investigation Report No. 42, Soil Survey Laboratory Methods Manual, Version 3.0

3976     RUS 1755 Telecommunications Standards and Specifications for Materials, Equipment and Construction

3977     RUS 202-1 (2004) List of Materials Acceptable for Use on Systems of RUS Electrification Borrowers

3978     RUS Bull 1728F-700 (2011) Specification for Wood Poles, Stubs, and Anchor Logs

3979     RUS Bull 1728H-701 (1993) Wood Crossarms (Solid and Laminated), Transmission Timbers and Pole Keys

3980     RUS Bull 1751F-205 (1987) Filled Telephone Cables (PE-39)

3981     RUS Bull 1751F-630 (1996) Design of Aerial Plant

3982     RUS Bull 1751F-640 (1995) Design of Buried Plant, Physical Considerations

3983     RUS Bull 1751F-643 (2002) Underground Plant Design

3984     RUS Bull 1751F-644 (2002) Underground Plant Construction

3985     RUS Bull 1751F-815 (1979) Electrical Protection of Outside Plant RUS Bull 1753F-201 (1997) Acceptance Tests of Telecommunications Plant (PC-4)

3986     RUS Bull 1753F-201 (1997) Acceptance Tests of Telecommunications Plant (PC-4)

3987     RUS Bull 1753F-401 (1995) Splicing Copper and Fiber Optic Cables (PC-2)

3988     RUS Bull 1753F-601 (1994) Specifications for Filled Fiber Optic Cables (PE-90)

3989     RUS Bull 345-50 (1979) Trunk Carrier Systems (PE-60)

3990     RUS Bull 345-65 (1985) Shield Bonding Connectors (PE-65)

3991     RUS Bull 345-67 (1998) REA Specification for Filled Telephone Cables, PE-39

3992     RUS Bull 345-72 (1985) Filled Splice Closures (PE-74)

3993     RUS Bull 345-83 (1979; Rev Oct 1982) Gas Tube Surge Arrestors (PE-80)

3994     U.S. Farm Bill (2002) U.S. Farm Bill of May 2002

3995     U.S. DEPARTMENT OF COMMERCE (DOC)

3996     DOC/NIST PS1 (1995) Construction and Industrial Plywood with Typical APA Trademarks

3997     DOC/NIST PS51 (1971) Hardwood and Decorative Plywood

3998     DOC/NIST PS56 (1973) Structural Glued Laminated Timber

3999     DOC/NIST PS58 (1973) Basic Hardboard (ANSI A135.4)

4000     U.S. DEPARTMENT OF DEFENSE (DOD)

4001     DOD 4000.25-1-M (2006) MILSTRIP – Military Standard Requisitioning and Issue Procedures

4002     DOD 4500.9-R (2007) Defense Transportation Regulation – Part II: Cargo Movement

4003     DOD 5100.76-M (2012) Physical Security of Sensitive Conventional Arms, Ammunition, and Explosives

4004     DOD 5220.22-M (2013) National Industrial Security Program Operating Manual (NISPOM)

4005     DOD-G-24508 (1977; Rev A; Am 4 1998) Grease, High Performance, Multipurpose (Metric)

4006     MIL-A-22262 (1993; Rev B; Am 2 1996) Abrasive Blasting Media Ship Hull Blast Cleaning

4007     MIL-A-24179 (1969; Rev A; Am 2 1980; Notice 1 1987) Adhesive, Flexible Unicellular-Plastic Thermal Insulation

4008     MIL-A-25896 (1983; Rev E; Notice 1 1989; Notice 3 2003)

4009     MIL-A-3316 (1987; Rev C; Am 2 1990) Adhesives, Fire-Resistant, Thermal Insulation

4010     MIL-A-8625 (1993; Rev F; Am 1 2003) Anodic Coatings, for Aluminum and Aluminum Alloys

4011     MIL-B-18897 (Rev F; CANC Notice 1) Boilers, Steam and Hot Water, Watertube (Straight Bare and Finned Tube), Cast Iron and Firebox, Packaged Type (40,000 to 35,000,000 BTU/HR Thermal Output Capacity)

4012     MIL-C-15726 (1988; Rev F; Am 1 1991) Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod, and Wire

4013     MIL-C-18480 (1982; Rev B; Notice 2 2009) Coating Compound, Bituminous, Solvent, Coal-Tar Base

4014     MIL-C-24368/1 (1987; Rev B) Connector Assemblies; Plug, Power Transfer, Shore to Ship and Ship to Ship, 500 Volts, 500 Amperes, 60 Hertz, Symbol Number 1160

4015     MIL-C-24368/2 (1987; Rev B) Connector Assemblies; Receptacle, and Receptacle-Cabled, Power Transfer, Shore to Ship and Ship to Ship, 500 Volts, 500 Amperes, 60 Hertz, Symbol Number 1161

4016     MIL-C-83260 (1972; Rev A; Notice 1 1996) Coupler, Hydrant Valve

4017     GRU-16/e

4018     MIL-D-16791 (1990; Rev G, Am 1 1993) Detergents, General Purpose (Liquid, Non-Ionic)

4019     MIL-DTL-12276 (2006; Rev E; Notice 1 2011) Varnish, Phenolic, Baking

4020     MIL-DTL-15024 (1997; Rev F) Plates, Tags and Bands for Identification of Equipment, General Specification for

4021     MIL-DTL-16884 (2012; Rev M) Fuel, Naval Distillate

4022     MIL-DTL-17813 (2009; Rev H; Supp 1 2009; Notice 1 2013) Expansion Joints, Pipe, Metallic Bellows, General Specification for

4023     MIL-DTL-24441 (2009; Rev D) Paint, Epoxy-Polyamide, General Specification for

4024     MIL-DTL-24441/19 (2009; Rev C) Paint, Epoxy-Polyamide, Zinc Primer, Formula 159, Type III

4025     MIL-DTL-24441/20 (2009; Rev B) Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type III

4026     MIL-DTL-24441/22 (2009; Rev B) Paint, Epoxy-Polyamide, White Formula 152, Type III

4027     MIL-DTL-24441/29 (2009; Rev B) Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type IV

4028     MIL-DTL-24441/31 (2009; Rev B) Paint, Epoxy-Polyamide, White, Formula 152, Type IV

4029     MIL-DTL-24643/3 (2009; Rev E) Cable, Electrical, -20 Degrees C to +90 Degrees, 600 Volts, Types LSSHOF, LSDHOF, LSTHOF, and LSFHOF

4030     MIL-DTL-24788 (2008; Rev A) Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel With or Without Continuity Switch

4031     MIL-DTL-28840 (2010; Rev D; Supp 1 2013) Connectors, Electrical, Circular Threaded, High Density, High Shock, Shipboard, Class D, General Specification

4032     MIL-DTL-28840/12 (2009; Rev F) Connectors, Electrical, Screw Threads, High Density, High Shock, Shipboard, Crimp Contacts Receptacle, Box Mounting, Classes D, DS, P, T and Z

4033     MIL-DTL-29229 (Rev B, Notice 1) Switches and Frogs, Track, Fabricated, for Portal Cranes

4034     MIL-DTL-32101 (2012 – Controlled Distribution Document) Carbon, Activated, Impregnated, Copper-silver-Zinc-Molybdenum-Triethylenediamine (ASZM-TEDA) – Controlled Distribution Document

4035     MIL-DTL-38219 (1998; Rev D) Turbine Fuel, Low Volatility, JP-7

4036     MIL-DTL-5541 (2006; Rev F) Chemical Conversion Coatings on Aluminum and Aluminum Alloys

4037     MIL-DTL-5624 (2013; Rev V) Turbine Fuel, Aviation, Grades JP-4 and JP-5

4038     MIL-DTL-5904 (2010; Rev E) Light, Runway Marker, Elevated, Type C-1

4039     MIL-DTL-7830 (2007; Rev E; Notice 1) Light Assembly, Marker, Aircraft Obstruction

4040     MIL-DTL-82020 (1997; Rev C; Notice 1; CANC Notice 2) Switches and Frogs, Track, Cast Manganese Steel, for Portal Cranes

4041     MIL-DTL-83133 (2011; Rev H; Am 2 2013) Turbine Fuels, Aviation, Kerosene Type, JP-8 (NATO F-34), NATO F-35 and JP-8 + 100 (NATO F-37)

4042     MIL-DTL-83413 (2012; Rev C) Connectors and Assemblies, Electrical, Aircraft Grounding, General Specification for

4043     MIL-DTL-83413/4 (2013; Rev D) Connectors and Assemblies, Electrical, Aircraft Grounding: Plugs, for Types I and II Grounding Assemblies

4044     MIL-DTL-83413/7 (2012; Rev E; Am 1 2013) Connectors and Assemblies, Electrical, Aircraft Grounding Clamp Connector for Types I and III Grounding Assemblies, Clip, Electrical

4045     MIL-E-17814 (1992; Rev F; CANC Notice 1) Expansion Joints, Pipe, Slip-Type, Packed

4046     MIL-F-18280 (1995; Rev F; Supp 1; CANC Notice 1) Fittings, Flareless Tube, Fluid Connection

4047     MIL-F-24385 (1992; Rev F; Am 1 1994) Fire Extinguishing Agent, Aqueous Film Forming Foam (AFFF) Liquid Concentrate, for Fresh and Seawater

4048     MIL-F-29177 (1985; Rev A; CANC Notice 1) Filter, Air-Extended Area, Initial Installation

4049     MIL-H-15021 (1950; Rev A; Am 2 1959) Hook, Snap Bolt, Swivel-Eye, and Rings

4050     MIL-HDBK 232 (1987; Rev A; Notice 1 1988; Notice 2 2000) Red/Black Engineering – Installation Guidelines

4051     MIL-HDBK-17-3 (2002; Rev F; CANC Notice 1) Composite Materials Handbook, Vol. 3, Polymer Matrix Composites Material Usage, Design, and Analysis

4052     MIL-HDBK-419 (1987; Rev A) Grounding, Bonding, and Shielding for Electronic Equipments and Facilities Volumes 1 of 2 Basic Theory

4053     MIL-HDBK-831 (2013; Rev A) Preparation of Test Reports

4054     MIL-I-1361 (1985; Rev C; Notice 1 1991) Instrument Auxiliaries, Electrical Measuring: Shunts, Resistors and Transformers

4055     MIL-I-24092 (1993; Rev D; Supp 1993) Insulating Varnishes and Solventless Resins for Applications by the Dip

4056     MIL-I-24768/14 (1992) Insulation, Plastic, Laminated, Thermosetting, Cotton-Fabric-Base, Phenolic-Resin (FBG)

4057     MIL-I-631 (1961; Rev D; Am 6 1987) Insulation, Electrical, Synthetic-Resin Composition, Nonrigid

4058     MIL-L-26764 (1970; Rev B) Light, Marker, Airport Approach, High Intensity, Type MB-2

4059     MIL-L-26990 (1967; Rev B; Am 2 1978) Light, Marker, Airport Approach, High Intensity, Type MB-1

4060     MIL-L-29575 (1989) Light, Wave-Off, Flashing, Capacitance-Discharge

4061     MIL-L-7158 (1969; Rev E; Notice 1 1991) Light, Beacon, Rotating, 24-Inch

4062     MIL-P-21035 (1991; Rev B; Notice 2 2003) Paint, High Zinc Dust Content, Galvanizing Repair (Metric)

4063     MIL-P-8944 (1970; Rev A; Am 1 1983; Notice 2) Panel, Airport Lighting Control, General Specification for

4064     MIL-PRF-13789 (1999; Rev E; Notice 1 2008) Strainers, Sediment: Pipeline, Basket Type

4065     MIL-PRF-15733 (2010; Rev J, Supp 1 2010) Filters and Capacitors, Radio Frequency Interference, General Specification for

4066     MIL-PRF-17331 (2013; Rev K) Lubricating Oil, Steam Turbine and Gear, Moderate Service

4067     MIL-PRF-19565 (1988; Rev C) Coating Compounds, Thermal Insulation, Fire- and Water-Resistant, Vapor-Barrier

4068     MIL-PRF-22750 (2011; Rev G) Coating, Epoxy, High Solids

4069     MIL-PRF-23236 (2009; Rev D) Coating Systems for Ship Structures

4070     MIL-PRF-23377 (2012; Rev K) Primer Coatings: Epoxy, High Solids

4071     MIL-PRF-24021 (1998; Rev K) Electric Power Monitors, External Aircraft

4072     MIL-PRF-24635 (2009; Rev E) Coating Systems, Weather Resistant, Exterior Use

4073     MIL-PRF-25567 (1998; Rev E; Notice 1 2005; Notice 2 2010) Leak Detection Compound, Oxygen Systems (Metric)

4074     MIL-PRF-32016 (2002; Rev A) Cell, Gas Phase, Adsorber

4075     MIL-PRF-370 (2002; Rev J) Hose And Hose Assemblies, Nonmetallic: Elastomeric, Liquid Fuel

4076     MIL-PRF-4556 (1998; Rev F; Am 1 1999; CANC Notice 1 2011) Coating Kit, Epoxy, for Interior of Steel Fuel Tanks

4077     MIL-PRF-52747 (1996; Rev F) Nozzle Assembly, Closed-Circuit Refueling, Standard and Arctic Service

4078     MIL-PRF-52748 (1995; Rev F; Notice 1 2004; Notice 2 2010) Nozzle, Adapter, Closed-Circuit to Gravity Fill, Standard and Arctic Service

4079     MIL-PRF-680 (2010; Rev C) Degreasing Solvent

4080     MIL-PRF-85285 (2012; Rev E) Coating: Polyurethane Aircraft and Support Equipment

4081     MIL-PRF-907 (2004; Rev F) Antiseize Thread Compound, High Temperature

4082     MIL-R-24243 (1994; Rev C, Supp 1 1994; Am 1 1994) Rivets, Blind, Nonstructural, Retained Mandrel, General specification for

4083     MIL-R-43900 (1985; Rev B; Notice 1; CANC Notice 2) Refrigerators, Freezers, Prefabricated, Mechanical, Commercial, Walk-In

4084     MIL-STD-101 (1970; Rev B) Color Code for Pipelines & for Compressed Gas Cylinders

4085     MIL-STD-108 (1966; Rev E; Am 1 1985; Notice 2 1990) Definitions of and Basic Requirements for Enclosures for Electric and Electronic Equipment

4086     MIL-STD-129 (2014; Rev R) Military Marking for Shipment and Storage

4087     MIL-STD-130 (2007; Rev N; Change 1 2012) Identification Marking of U.S. Military Property

4088     MIL-STD-1399-300 (2008; Rev B) Electric Power, Alternating Current

4089     MIL-STD-161 (2005; Rev G; Notice 1 2010) Identification Methods for Bulk Petroleum Products Systems Including Hydrocarbon Missile Fuels

4090     MIL-STD-1691 (1994; Rev F) Construction and Material Schedule for Military Medical and Dental Facilities

4091     MIL-STD-1699 (1992; Rev B) Nondestructive Evaluation of Butt Welds in Crane and Railroad Rails

4092     MIL-STD-188-124 (1998; Rev B; Notice 2 1998; Notice 3 2000; Notice 4 2013) Grounding, Bonding and Shielding for Common Long Haul/Tactical Communications Systems, Including Ground Based Communications – Electronics

4093     MIL-STD-188-125-1 (1998; Basic; Notice 1 2005) High-Altitude Electromagnetic Pulse (HEMP) Protection for Ground-Based C41 Facilities Performing Critical, Time-Urgent Missions, Part I Fixed Facilities

4094     MIL-STD-188-176 (1996; Notice 1) Standardized Profile for Asynchronous Transfer Mode (ATM)

4095     MIL-STD-202 (2002; Rev G; Notice 1 2003; Notice 2 2013) Electronic and Electrical Component Parts

4096     MIL-STD-2042 (2002; Rev B; Notice 1 2007) Fiber Optic Cable Topology Installation Standard Methods for Naval Ships

4097     MIL-STD-220 (2009; Rev C) Method of Insertion Loss Measurement

4098     MIL-STD-282 (2012; Rev A; Change 1 – Controlled Distribution Document) Filter Units, Protective Clothing, Gas-Mask Components and Related Products: Performance-Test Methods

4099     MIL-STD-461 (2007; Rev F) Requirements for the Control of Electromagnetic Interference Characteristics of

4100     MIL-STD-704 (2004; Rev F; Notice 1 2008; Notice 2 2013) Aircraft Electric Power Characteristics

4101     MIL-STD-810 (2008; Rev G) Environmental Engineering Considerations and Laboratory Tests

4102     MIL-STD-889 (1976; Rev B; Notice 2 1988; Notice 3 1993) Dissimilar Metals

4103     MIL-T-152 (1961; Rev B; Am 2 1966; Notice 2 2000; Notice 3 2006; Notice 4 2011) Treatment, Moisture and Fungus Resistant, of Communications, Electronic, and Associated Electrical Equipment

4104     MIL-T-16420 (1978; Rev K; Am 1 1988) Tube, Copper-Nickel Alloy, Seamless and Welded (Copper Alloy Numbers 715 and 706)

4105     MIL-T-19646 (1990; Rev A) Thermometer, Gas Actuated, Remote Reading

4106     MIL-T-27535 (1964; Rev A; Supp 1 1964; Am 2 1965; Notice 1 1993; Notice 3 1999) Transformer, Power, Isolation, Series Circuit, Airport Lighting, General Specification for

4107     MIL-T-81772 (1986; Rev B; Am 1 1991) Thinner, Aircraft Coating

4108     MIL-V-12003 (1980; Rev F; Am 1; CANC Notice 1) Valves, Plug, Cast-Iron or Steel, Manually Operated

4109     MIL-V-173 (1969; Rev C; Am 2; CANC Notice 3) Varnish, Moisture and Fungus Resistant (For Treatment of Communications, Electronic, and Associated Equipment)

4110     MIL-V-18436 (1987; Rev F) Valves, Check, Bronze, Cast Iron, and Steel Body

4111     MS 17814 (1972; Rev C; Am 1 2002; Notice 1 2006; Notice 2 2012) Coupling, Frangible, Aviation Ground Lights

4112     UFC 1-200-01 (2013) General Building Requirements

4113     UFC 1-300-08 (2009, with Change 2) Criteria for Transfer and Acceptance of DoD Real Property

4114     UFC 3-230-03 (2012) Water Treatment

4115     UFC 3-250-01FA (2004) Pavement Design for Roads, Streets, Walks, and Open Storage Areas

4116     UFC 3-301-01 (2013) Structural Engineering

4117     UFC 3-310-04 (2013) Seismic Design for Buildings

4118     UFC 3-460-03 (2003) O&M: Maintenance of Petroleum Systems

4119     UFC 3-601-02 (2010) Operations and Maintenance: Inspection, Testing, and Maintenance of Fire Protection Systems

4120     UFC 4-010-01 (2012) DoD Minimum Antiterrorism Standards for Buildings

4121     UFC 4-021-01 (2008; Change 1 2010) Design and O&M: Mass Notification Systems

4122     U.S. DEPARTMENT OF ENERGY (DOE)

4123     DOE CE-2 (2000) How to Buy an Energy-Efficient Water-Cooled Electric Chiller

4124     DOE CE-3 (2001) How to Buy an Energy-Efficient Commercial Unitary Air Conditioner

4125     DOE CE-6 (2000) How to Buy an Energy-Efficient Air-Cooled Electric Chiller

4126     DOE CI-1 (2001) How to Buy a Premium Energy-Efficient Electric Motor

4127     DOE HDBK-1169 (2003) Nuclear Air Cleaning Handbook

4128     DOE LT-4 (2000) How to Buy Energy-Efficient Exit Signs

4129     DOE RA-1 (2000) How to Buy an Energy-Efficient Room Air Conditioner

4130     ISWG Guiding Principles (2008) High Performance and Sustainable Buildings Guidance

4131     U.S. DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT (HUD) HUD 6780 (1995; Errata Aug 1996;Rev Ch. 7 – 1997) Guidelines

4132     HUD 6780 (1995; Errata Aug 1996;Rev Ch. 7 – 1997) Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing

4133     U.S. DEPARTMENT OF STATE (SD) SD Std-01.01 (1993 Rev G Amended; Inx Certified Prod/Mfg) Certification Standard Forced Entry and Ballistic Resistance of Structural Systems

4134     SD STD-02.01 (2003; Rev A) Specification For Vehicle Crash Test of Perimeter Barriers and Gates

4135     U.S. DEPARTMENT OF TRANSPORTATION (DOT)

4136     DOT 4500.9R Defense Transportation Regulation, Part 2, Cargo Movement, Chapter 204, Hazardous Material

4137     U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA) 7 USC Section 136 Federal Insecticide, Fungicide, and Rodenticide Act

4138     EPA 340/1-90/018 (1990) Asbestos/NESHAP Regulated Asbestos Containing Materials Guidance

4139     EPA 402-C-01-001 (2001) IAQ Building Education and Assessment Tool (I-BEAM)

4140     EPA 402-F-91-102 (1991) Building Air Quality: A Guide for Building Owners and Facility Managers

4141     EPA 402-R-92-004 (1992) Indoor Radon and Radon Decay Product Measurement Device Protocols

4142     EPA 402-R-92-014 (1993) Radon Measurement in Schools

4143     EPA 402-R-93-003 (1993) Protocols for Radon and Radon Decay Product Measurements in Homes

4144     EPA 402-R-93-078 (1993; R 1994) Radon Mitigation Standards

4145     EPA 450/4-80/023R (1985) Guideline for Determination of Good Engineering Practice Stack Height (Technical Support Document for the Stack Height Regulations)

4146     EPA 530-R-97-007 (1997) Best Management Practices (BMPs) for Soils Treatment Technologies;, Suggested Operational Guidelines to Prevent Cross-Media Transfer of Contaminants During Cleanup Activities

4147     EPA 530/F-93/004 (1993; Rev O; Updates I, II, IIA, IIB, and III) Test Methods for Evaluating Solid Waste (Vol IA,

4148     EPA 540/2-91/020A (1991) Guide for Conducting Treatability Studies under CERCLA: Soil Washing: Interim Guidance

4149     EPA 540/R 99-008 (1999) USEPA Contract Laboratory Program National Functional Guidelines for Organic Data Review

4150     EPA 540/R-92/071a (1992) A Guide For Conducting Treatability Studies Under CERCLA, Final Report

4151     EPA 542-B-98-007 (1998) Guide to Documenting and Managing Cost and Performance Information for Remediation Projects

4152     EPA 560/5-85-024 (1985) Guidance for Controlling Asbestos-Containing Materials in Buildings (Purple Book)

4153     EPA 560/5-86-017 (1986) Field Manual for Grid Sampling of PCB Spill Sites to Verify Cleanup

4154     EPA 560/6-82-002 (1982) Guidelines and Support Documents for Environmental Effects Testing

4155     EPA 600-4-89-034 (1990) Handbook of Suggested Practices for the Design and Installation of Groundwater Monitoring Wells

4156     EPA 600/4-79/020 (1983) Methods for Chemical Analysis of Water and Wastes

4157     EPA 600/4-90/027F (1993) Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms

4158     EPA 600/R-96/084 (2000) Guidance for Data Quality Assessment: Practical Methods for Data Analysis EPA QA/G-9, QA00 version

4159     EPA 625-R-92-016 (1993; Am 1994) Radon Prevention in Design and Construction of Schools and Other Large Buildings

4160     EPA 625-R-93-011 (1993) Radon Reduction Technique for Existing Detached Houses: Technical Guidance for Active Soil Depressurization Systems

4161     EPA 625/1-86/021 (1986) Design Manual: Municipal Wastewater Disinfection

4162     EPA 625/6-89/019 (1989) Handbook: Guidance on Setting Permit Conditions and Reporting Trial Burn Results: Volume II of the Hazardous Waste Incineration Guidance Series

4163     EPA 625/6-89/021 (1989) Handbook Hazardous Waste Incineration Measurement Guidance Manual: Volume III of the Hazardous Waste Incineration Guidance Series

4164     EPA 625/6-89/023 (1990) Handbook: Quality Assurance/Quality Control (QA/QC) Procedures For Hazardous Waste Incineration

4165     EPA 712-C-98-075 (1998) Fate, Transport and Transformation Test Guidelines – OPPTS 835.3100- “Aerobic Aquatic Biodegradation”

4166     EPA 821-R-02-012 (2002) Methods for Measuring the Acute Toxicity of Effluents and Receiving Waters to Freshwater and Marine Organisms

4167     EPA 832-R-92-005 (1992) Storm Water Management for Construction Activities Developing Pollution Preventions and Plans and Best Management Practices

4168     EPA 833-R-060-04 (2007) Developing Your Storm Water Pollution Prevention Plan, a Guide for Construction Sites

4169     EPA AP-42 (1995) Compilation of Air Pollution Emission Factors

4170     EPA Method 24 (2000) Determination of Volatile Matter Content, Water Content, Density, Volume Solids, and Weight Solids of Surface Coatings

4171     EPA SESDPROC-105-R2 (2013) Groundwater Level and Well Depth Measurement

4172     EPA SM 9223 (2004) Enzyme Substrate Coliform Test

4173     EPA SW-846 (Third Edition; Update IV) Test Methods for Evaluating Solid Waste: Physical/Chemical Methods

4174     EPA SW-846.3-3 (1999, Third Edition, Update III-A) Test Methods for Evaluating Solid Waste: Physical/Chemical Methods Energy Star (1992; R 2006) Energy Star Energy Efficiency Labeling System (FEMP)

4175     NPDES (1972; R 2005) National Pollutant Discharge Elimination System

4176     PL 93-523 (1974; A 1999) Safe Drinking Water Act

4177     U.S. FEDERAL AVIATION ADMINISTRATION (FAA)

4178     FAA 6850.19 (1978) Frangible Coupling

4179     FAA AC 150/5300-13 (2012; Rev A; Change 1 2014) Airport Design

4180     FAA AC 150/5320-12 (1997, Rev C; Change 1-3, 5 and 6) Measurement, Construction and Maintenance of Skid-Resistant Airport Pavement Surfaces

4181     FAA AC 150/5340-30 (2010; Rev E) Design and Installation Details for Airport Visual Aids

4182     FAA AC 150/5345-10 (2005; Rev F) Specification for Constant Current Regulators Regulator Monitors

4183     FAA AC 150/5345-12 (2005; Rev E) Specification for Airport and Heliport Beacon

4184     FAA AC 150/5345-13 (2007; Rev B) Specification for L-841 Auxiliary Relay Cabinet Assembly for Pilot Control of Airport Lighting Circuits

4185     FAA AC 150/5345-26 (2008; Rev D) FAA Specification for L-823 Plug and Receptacle, Cable Connectors

4186     FAA AC 150/5345-27 (2013; Rev E) Specification for Wind Cone Assemblies

4187     FAA AC 150/5345-28 (2005; Rev F) Precision Approach Path Indicator (PAPI) Systems

4188     FAA AC 150/5345-3 (2007; Rev F) Specification for L-821 Panels for Control to Airport Lighting

4189     FAA AC 150/5345-42 (2013; Rev G) Specification for Airport Light Bases, Transformer Housings, Junction Boxes and Accessories

4190     FAA AC 150/5345-43 (2006; Rev F) Specification for Obstruction Lighting Equipment

4191     FAA AC 150/5345-44 (2007; Rev H) Specification for Runway and Taxiway Signs

4192     FAA AC 150/5345-45 (2007; Rev C) Low-Impact Resistant (LIR) Structures

4193     FAA AC 150/5345-46 (2009; Rev D) Specification for Runway and Taxiway Light Fixtures

4194     FAA AC 150/5345-47 (2005; Rev B) Specification for Series to Series Isolation Transformers for Airport Lighting Systems

4195     FAA AC 150/5345-5 (2006; Rev B) Specification for Airport Lighting Circuit Selector Switch

4196     FAA AC 150/5345-51 (2005; Rev A) Specification for Discharge-Type Flashing Light Equipment

4197     FAA AC 150/5345-7 (2013; Rev F) Specification for L-824 Underground Electrical Cable for Airport Lighting Circuits

4198     FAA AC 150/5370-10 (2009; Rev E) Standards for Specifying Construction of Airports

4199     FAA AC 70/7460-1 (2007; Rev K) Obstruction Marking and Lighting

4200     FAA E-1315 (1967; Rev A; Am 1971) Light Base and Transformer Housing

4201     FAA E-2159 (2004; Rev E) Runway End Identifier Lighting System (REIL)

4202     FAA E-2519 (1972; Rev A) Types I and II

4203     FAA E-2628 (1979; Rev B) Sequenced Flashing Lighting System, Elevated and Semiflush with Dimming and Monitoring

4204     FAA E-2690 (2000; Rev A) Isolation Transformer (1500 watt) for High Intensity Approach Lighting Systems

4205     FAA E-2702 (2007; Rev A)Low Impact Resistant (LIR) Structures

4206     FAA E-2756 (2004; Rev B) Four Box Precision Approach Path Indicator (PAPI) without Remote Monitoring

4207     FAA E-2980 (2005) Medium Intensity Approach Lighting System with Runway Alignment Indicator Lights (MALSR)

4208     FAA E-982 (2003; Rev J) PAR-56 Lampholder

4209     U.S. FEDERAL COMMUNICATIONS COMMISSION (FCC)

4210     FCC EMC (2002) FCC Electromagnetic Compliance Requirements

4211     FCC Part 15 Radio Frequency Devices (47 CFR 15)

4212     FCC Part 68 Connection of Terminal Equipment to the Telephone Network (47 CFR 68)

4213     U.S. FEDERAL HIGHWAY ADMINISTRATION (FHWA)

4214     FHWA IF-99-025 (1999) Drilled Shafts: Construction Procedures and Design Methods (with Errata Sheet)

4215     FHWA IP-84-11 (1984) Handbook on Design and Construction of Drilled Shafts Under Lateral Load

4216     FHWA NHI-00-043 (2000) Mechanically Stabilized Earth Walls and Reinforced Soil Slopes Design and Construction

4217     FHWA RD-89-199 (1989) Hydraulic Stability of Articulated Concrete Block Revetment Systems During Overtopping Flow

4218     MUTCD (2009) Manual on Uniform Traffic Control Devices

4219     NCHRP 350 (1993) Recommended Procedures for the Safety Performance Evaluation of Highway Features

4220     U.S. GENERAL SERVICES ADMINISTRATION (GSA)

4221     CID A-A-1689 (Rev B) Tape, Pressure-Sensitive Adhesive, (Plastic Film)

4222     CID A-A-1922 (Rev A; Notice 2) Shield, Expansion (Caulking Anchors, Single Lead)

4223     CID A-A-1923 (Rev A; Notice 2) Shield, Expansion (Lag, Machine and Externally Threaded Wedge Bolt Anchors)

4224     CID A-A-1924 (Rev A; Notice 2) Shield, Expansion (Self Drilling Tubular Expansion Shell Bolt Anchors

4225     CID A-A-1925 (Rev A; Notice 2) Shield Expansion (Nail Anchors)

4226     CID A-A-1928 (Rev C; Notice 1) Padlock (Combination)

4227     CID A-A-203 (Rev C; Notice 3) Paper, Kraft, Untreated

4228     CID A-A-272 (Rev B; Notice 1) Caulking Compounds

4229     CID A-A-2962 (Rev A; Notice 2) Enamel, Alkyd, Gloss, Low VOC Content

4230     CID A-A-3120 (Rev A) Paint: For Swimming Pools

4231     CID A-A-3130 (Rev A) Paint (For Application to Wet Surfaces)

4232     CID A-A-344 (Rev B; Notice 1) Lacquer (Clear Gloss)

4233     CID A-A-50457 (Rev A; Notice 2) Valves Radiator, Heating Packless Bonnett, Class 125 PSIG

4234     CID A-A-50494 (Basic; Notice 1) Exhaust Head, Steam

4235     CID A-A-50502 (Basic) Air Conditioners, (Unitary Heat Pump), Air to Air (3,000 to 300,000 BTU)

4236     CID A-A-50504 (Basic) Analyzers, Flue-Gas, Orsat-Type, Portable

4237     CID A-A-50543 (Basic; Notice 2) Heaters, Convection, Steam or Hot Water

4238     CID A-A-50544 (Basic; Notice 2) Radiators, Heating, Steam and Hot Water, Cast Iron

4239     CID A-A-50545 (Basic; Notice 2) Radiator, Heating, Baseboard Panel, Steam and Hot Water

4240     CID A-A-50553 (Rev A; Notice 1) Fitting for Conduit, Metal, Rigid (Thick-Wall and Thin-Wall (EMT) Type)

4241     CID A-A-50555 (Basic) Pumping Units, Sewage, Duplex, Centrifugal, Automatic Wet-Pit Type

4242     CID A-A-50558 (Basic; Notice 1) Valves, Pressure Regulating, Steam

4243     CID A-A-50559 (Basic; Notice 1) Valves, Temperature-Regulating (Thermostatically Controlled)

4244     CID A-A-50560 (Basic) Pumps, Centrifugal, Water Circulating, Electric-Motor-Driven

4245     CID A-A-50561 (Basic) Pumps, Rotary, Power-Driven, Viscous Liquids

4246     CID A-A-50562 (Basic) Pump Units, Centrifugal, Water, Horizontal; General Service and Boiler-Feed: Electric-Motor or Steam-Turbine-Driven

4247     CID A-A-50565 (Basic) Cabinet, Storage; Wardrobe, Three Drawer

4248     CID A-A-50566 (Basic) Monitoring Devices, Emission, Stack Related

4249     CID A-A-50568 (Basic; Notice 1) Gages, Liquid Level Measuring, Tank

4250     CID A-A-50573 (Basic) Water Softener Unit, Lime-Soda Type

4251     CID A-A-50696 (Basic) Reels, Static Discharge, Grounding, 50 and 75 Foot Cable Lengths

4252     CID A-A-50879 (Rev A) Sterilization Test Strip Set, Bacterial Spore

4253     CID A-A-51145 (Rev D; Notice 1; Notice 2) Flux, Soldering, Non-Electronic, Paste and Liquid

4254     CID A-A-52128 (Basic) Shelving, Storage, Stationary and Mobile, Food Storage

4255     CID A-A-52557 (Rev A; Notice 1) Fuel Oil, Diesel; for Posts, Camps and Stations

4256     CID A-A-55614 (Basic; Notice 2) Shield, Expansion (Non-Drilling Expansion Anchors)

4257     CID A-A-55615 (Basic; Notice 2) Shield, Expansion (Wood Screw and Lag Bolt Self-Threading Anchors

4258     CID A-A-55619 (Rev C; Notice 1) Casters, Industrial, Heavy Duty

4259     CID A-A-58092 (Basic; Notice 1) Tape, Antiseize, Polytetrafluoroethylene

4260     CID A-A-59213 (Rev A) Splice Connectors

4261     CID A-A-59222 (Basic; Notice 1) Fans, Centrifugal, Draft, Forced and Induced

4262     CID A-A-59223 (Basic; Notice 1) Cooling Towers, Liquid

4263     CID A-A-59224 (Basic; Notice 2) Meters, Fluid Quantity Volumetric

4264     CID A-A-59249 (Basic; Notice 1; Notice 2) Filters, Fluid, Pressure, Feedwater

4265     CID A-A-59326 (Rev D) General Specification For Coupling Halves, Quick-Disconnect, Cam-Locking Type

4266     CID A-A-59502 (Basic) Plastic Sheet, Polycarbonate

4267     CID A-A-59617 (Basic) Unions, Brass or Bronze, Threaded Pipe Connections and Solder-Joint Tube Connections

4268     CID A-A-60001 (Rev A) Traps, Steam

4269     CID A-A-60003 (Basic) Partitions, Toilet, Complete

4270     CID A-A-60005 (Basic; Notice 2) Frames, Covers, Gratings, Steps, Sump And Catch Basin, Manhole

4271     CID A-A-857 (Rev B, Notice 3) Thinner, Dope and Lacquer (Cellulose Nitrate)

4272     FED-STD-141 (Rev D) Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and

4273     FED-STD-209 (Rev E) Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones

4274     FED-STD-228 (2000; Notices 1-5) Cable and Wire, Insulated; Methods of Testing

4275     FED-STD-313 (Rev D; Notice 1) Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities

4276     FED-STD-595 (Rev C; Notice 1) Colors Used in Government Procurement

4277     FS AA-D-600 (Rev D, Am 1; Am 4) Door, Vault, Security

4278     FS AA-L-00486 (Rev J) Lockers, Clothing, Steel

4279     FS CCC-C-429 (Rev F; Notice 1) Cloth, Osnaburg, Cotton

4280     FS CCC-C-467 (Rev C; Notice 1) Cloth, Burlap, Jute (or Kenaf)

4281     FS CCC-W-408 (Rev D; Notices 1, 2) Wallcovering, Vinyl Coated

4282     FS F-B-2902 (Basic; Notice 1) Boilers, Steam Watertube (Bent Tube, Multi-Drum and Cross Drum) Packaged Type (10,000,000 to 125,000,000 BTU/HR Thermal Output Capacity)

4283     FS F-B-2903 (Basic; Notice 2) Boilers, Steam and or Water, Firetube, Scotch Packaged Type (320,001 to 35,000,000 BTU/HR Thermal Output Capacity)

4284     FS F-B-2909 (Basic) Burners, Single Light Oil, Gas, and Light Oil-Gas Combination for Packaged Heating Boilers (up to 320,000 BTU/HR Thermal Output Capacity)

4285     FS F-B-2910 (Basic) Burners, Single Oil, Gas, and Gas-Oil Combination for Packaged Boilers (320,001 to 125,000,000 BTU/HR Thermal Output Capacity)

4286     FS F-F-2901 (Basic; Notice 1) Feeders, Boiler Water Treatment, By-Pass and Compound Receiver Types

4287     FS F-F-351 (Rev F; Notice 1) Filters and Filter Elements, Fluid Pressure: Lubricating Oil, Bypass and Full Flow

4288     FS F-P-2908 (Basic; Notice 1) Pumping Units, Condensate, Return; and Boiler Feed Package

4289     FS F-T-2907 (Rev A; Notice 1) Tanks, Portable Hot Water Storage

4290     FS F-V-2906 (Basic) Valves, Air Venting, Steam

4291     FS FF-B-588 (Rev E; Notice 1) Bolt, Toggle: and Expansion Sleeve, Screw

4292     FS FF-S-325 (Basic; Int Amd 3; Notices 3, 4) Shield, Expansion; Nail, Expansion; and Nail, Drive Screw (Devices, Anchoring, Masonry)

4293     FS HH-I-558 (Rev C; Notice 1) Insulation, Blocks, Boards, Blankets, Felts, Sleeving (Pipe and Tube Covering), and Pipe Fitting Covering, Thermal (Mineral Fiber, Industrial Type)

4294     FS L-C-530 (Rev C; Notice 1) Coating, Pipe, Thermoplastic Resin

4295     FS L-S-125 (Rev B; Notice 1) Screening, Insect, Nonmetallic

4296     FS MM-L-736 (Rev D; Notice 1) Lumber; Hardwood

4297     FS MM-L-751 (Rev H) Lumber; Softwood

4298     FS MMM-A-001993 (1978; Rev A) Adhesive, Epoxy, Flexible, Filled (For Binding, Sealing, and Grouting)

4299     FS O-D-1276 (Rev B; Notice 1) Disinfectant-Detergent, General Purpose (Pine Oil)

4300     FS QQ-B-654 (Rev A; Notice 1; AM 1) Brazing Alloys, Silver

4301     FS RR-C-271 (Rev F) Chains and Attachments, Welded and Weldless

4302     FS RR-F-191 (Rev K) Fencing, Wire and Post Metal (and Gates, Chain-Link Fence Fabric, and Accessories)

4303     FS RR-F-191/1 (Rev F) Fencing, Wire and Post, Metal (Chain-Link Fence Fabric)

4304     FS RR-F-191/2 (Rev E) Fencing, Wire and Post, Metal (Chain-Link Fence Gates)

4305     FS RR-F-191/3 (Rev E; Am 1) Fencing, Wire and Post, Metal (Chain-Link Fence Posts, Top Rails and Braces)

4306     FS RR-F-191/4 (Rev F) Fencing, Wire and Post, Metal (Chain-Link Fence Accessories)

4307     FS RR-W-410 (Rev G) Wire Rope and Strand

4308     FS S-R-2834 (Basic) Radiators: Heating, Steel, Multifin Type

4309     FS S-U-2833 (Basic; Notice 1) Unit Heater, Air-Circulating, Steam – Hot Water

4310     FS SS-L-30 (Rev D; Int Am 3; Notice 1) Lath and Board Products, Gypsum

4311     FS SS-S-1401 (Rev C; Am 1; Notices 1, 2) Sealant, Joint, Non-Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Asphalt Concrete Pavements

4312     FS SS-S-200 (Rev E; Am 1; Notice 1) Sealant, Joint, Two-Component, Jet-Blast-Resistant, Cold-Applied, for Portland Cement Concrete Pavement

4313     FS TT-B-1325 (Rev D; Notice 1) Beads (Glass Spheres) Retro-Reflective (Metric)

4314     FS TT-C-490 (Rev F; Am 1) Cleaning Methods for Ferrous Surfaces and Pretreatments for Organic Coatings

4315     FS TT-C-520 (Rev B; Notice 1) Coating Compound, Bituminous, Solvent Type, Underbody (for Motor Vehicles)

4316     FS TT-E-489 (Rev J; Notice 2) Enamel, Alkyd, Glass, Low VOC Content

4317     FS TT-E-491 (Rev C; Notice 1) Enamel; Gloss, Synthetic (for Metal and Wood Furniture)

4318     FS TT-E-751 (Rev C) Ethyl Acetate

4319     FS TT-F-336 (Rev E; Notice 1) Filler, Wood, Paste

4320     FS TT-P-1952 (Rev E) Paint, Traffic and Airfield Markings, Waterborne

4321     FS TT-P-28 (Rev H) Paint, Aluminum, Heat Resisting (1200 Degrees F.)

4322     FS TT-P-38 (Rev E; Notice 1) Paint, Aluminum, Ready-Mixed

4323     FS TT-P-645 (Rev C) Primer, Paint, Zinc-Molybdate, Alkyd Type

4324     FS TT-S-001543 (Rev B; Notice 1) Sealing Compound: Silicone Rubber Base (For Calking, Sealing, and Glazing in Buildings and Other Structures)

4325     FS TT-V-121 (Rev H; Notice 1) Varnish, Spar, Water-Resisting FS UU-B-790 (Rev A; Am 1; Notice 1) Building Paper, Vegetable

4326     FS UU-B-790 (Rev A; Am 1; Notice 1) Building Paper, Vegetable Fiber: (Kraft, Waterproofed, Water Repellent and

4327     FS W-C-375 (Rev E; Supp 1) Circuit Breakers, Molded Case, Branch Circuit and Service

4328     FS W-H-2904 (Basic; Notice 1) Heaters, Fluid, Deaerating (For Water Only) 1,000 to 1,600,000 Pounds Per Hour Capacity

4329     FS WW-H-191 (Rev E; Notice 2) Heater, Fluid, Industrial (Instantaneous, Steam, Water Converter Type)

4330     FS WW-P-421 (Rev D; Notice 1) Pipe, Cast, Gray and Ductile Iron, Pressure (For Water and Other Liquids)

4331     FS WW-P-541 (Rev E; Am 1; Notice 1) Plumbing Fixtures FS WW-S-2739 (Basic; Notice 1) Strainers, Sediment: Pipeline,

4332     FS WW-S-2739 (Basic; Notice 1) Strainers, Sediment: Pipeline, Water, Air, Gas, Oil, or Steam

4333     FS XX-C-2816 (Basic; Notice 1) Compressor, Air, Reciprocating or Rotary, Electric Motor Driven, Stationary, 10 HP and Larger

4334     GSA HPTP 07656-01 Installing Lead Stone Flashing to Protect Masonry Joints

4335     QPL-TNT-AP-28 (2004) Paint, Aluminum, Heat Resisting (1200 Degrees F)

4336     U.S. GREEN BUILDING COUNCIL (USGBC)

4337     LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)

4338     LEED GBDC (2009) LEED Reference Guide for Green Building Design and Construction

4339     LEED NC (2009) Leadership in Energy and Environmental Design(tm) New Construction Rating System

4340     U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA) 10 CFR 20 Standards for Protection Against Radiation

4341     10 CFR 20 Standards for Protection Against Radiation

4342     10 CFR 430 Energy Conservation Program for Consumer Products

4343     10 CFR 431 Energy Efficiency Program for Certain Commercial and Industrial Equipment

4344     15 CFR 772 Definition of Terms

4345     15 CFR 773 Special Licensing Procedures

4346     16 CFR 1201 Safety Standard for Architectural Glazing Materials

4347     16 CFR 1209 Interim Safety Standard for Cellulose Insulation

4348     16 CFR 1404.4 Requirements to Provide Performance and Technical Data by Labeling – Notice to Purchasers

4349     16 CFR 1630 Standard for the Surface Flammability of Carpets and Rugs (FF 1-70)

4350     21 CFR 1020 Performance Standards for Ionizing Radiation Emitting Products

4351     21 CFR 1040 Performance Standards for Light-Emitting Products

4352     21 CFR 175 Indirect Food Additives: Adhesives and Components of Coatings

4353     21 CFR 701 Cosmetic Labeling

4354     29 CFR 1904 Recording and Reporting Occupational Injuries and Illnesses

4355     29 CFR 1910 Occupational Safety and Health Standards

4356     29 CFR 1910-SUBPART D Walking – Working Surfaces

4357     29 CFR 1910-SUBPART Q Welding, Cutting, and Brazing

4358     29 CFR 1910-SUBPART Z Toxic and Hazardous Substances

4359     29 CFR 1910.1000 Air Contaminants

4360     29 CFR 1910.1001 Asbestos

4361     29 CFR 1910.1018 Inorganic Arsenic

4362     29 CFR 1910.1025 Lead

4363     29 CFR 1910.1028 Benzene

4364     29 CFR 1910.106 Flammable and Combustible Liquids

4365     29 CFR 1910.12 Construction Work

4366     29 CFR 1910.120 Hazardous Waste Operations and Emergency Response

4367     29 CFR 1910.1200 Hazard Communication

4368     29 CFR 1910.134 Respiratory Protection

4369     29 CFR 1910.141 Sanitation

4370     29 CFR 1910.144 Safety Color Code for Marking Physical Hazards

4371     29 CFR 1910.145 Accident Prevention Signs and Tags

4372     29 CFR 1910.146 Permit-required Confined Spaces

4373     29 CFR 1910.147 Control of Hazardous Energy (Lock Out/Tag Out)

4374     29 CFR 1910.157 (2003) Portable Fire Extinguishers

4375     29 CFR 1910.179 Overhead and Gantry Cranes

4376     29 CFR 1910.20 Access to Employee Exposure and Medical Records

4377     29 CFR 1910.212 Safety Standard for Machinery and Machine Guarding

4378     29 CFR 1910.219 Mechanical Power Transmission Apparatus

4379     29 CFR 1910.23 Guarding Floor and Wall Openings and Holes

4380     29 CFR 1910.24 Fixed Industrial Stairs

4381     29 CFR 1910.27 Fixed Ladders

4382     29 CFR 1910.28 Safety Standards for Scaffolding

4383     29 CFR 1910.306 Specific Purpose Equipment and Installations

4384     29 CFR 1910.94 Ventilation

4385     29 CFR 1915 Confined and Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment

4386     29 CFR 1919 Gear Certification

4387     29 CFR 1926 Safety and Health Regulations for Construction

4388     29 CFR 1926.103 Respiratory Protection

4389     29 CFR 1926.1101 Asbestos

4390     29 CFR 1926.1127 Cadmium

4391     29 CFR 1926.1400 Cranes & Derricks in Construction

4392     29 CFR 1926.16 Rules of Construction

4393     29 CFR 1926.200 Accident Prevention Signs and Tags

4394     29 CFR 1926.21 Safety Training and Education

4395     29 CFR 1926.32 Safety and Health Regulations for Construction – Definition

4396     29 CFR 1926.33 Access to Employee Exposure and Medical Records

4397     29 CFR 1926.450 Scaffolds

4398     29 CFR 1926.500 Fall Protection

4399     29 CFR 1926.501 Duty to Have Fall Protection

4400     29 CFR 1926.502 Fall Protection Systems Criteria and Practices

4401     29 CFR 1926.51 Sanitation

4402     29 CFR 1926.55 Gases, Vapors, Fumes, Dusts, and Mists

4403     29 CFR 1926.59 Hazard Communication

4404     29 CFR 1926.62 Lead

4405     29 CFR 1926.65 Hazardous Waste Operations and Emergency Response

4406     29 CFR 1926.651 Specific Excavation Requirements

4407     29 CFR 1926.652 Safety and Health Regulations for Construction; Subpart P, Excavations; Requirements for Protective Systems

4408     29 CFR 1926.757 Steel Erection; Open Web Steel Joists

4409     30 CFR 1 Mine Safety and Health Administration; Establishment and Use of Official Emblem

4410     30 CFR 72 Health Standards for Coal Mines

4411     33 CFR 328 Definitions of Waters of the United States

4412     36 CFR 1191 Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities; Architectural Barriers Act (ABA) Accessibility Guidelines

4413     40 CFR Protection of Environment

4414     40 CFR 112 Oil Pollution Prevention

4415     40 CFR 112.7 General Requirements for Spill Prevention, Control, and Countermeasure Plans

4416     40 CFR 117 Determination of Reportable Quantities for Hazardous Substances

4417     40 CFR 122 EPA Administered Permit Programs: The National Pollutant Discharge Elimination System

4418     40 CFR 122.26 Storm Water Discharges (Applicable to State NPDES Programs, see section 123.25)

4419     40 CFR 141.80 National Primary Drinking Water Regulations; Control of Lead and Copper; General Requirements

4420     40 CFR 143 National Secondary Drinking Water Regulations

4421     40 CFR 150 – 189 Pesticide Programs

4422     40 CFR 152 – 186 Pesticide Programs

4423     40 CFR 171 Certification of Pesticide Applicators

4424     40 CFR 241 Guidelines for Disposal of Solid Waste

4425     40 CFR 243 Guidelines for the Storage and Collection of Residential, Commercial, and Institutional Solid Waste

4426     40 CFR 247 Comprehensive Procurement Guideline for Products Containing Recovered Materials

4427     40 CFR 258 Subtitle D Landfill Requirements

4428     40 CFR 260 Hazardous Waste Management System: General

4429     40 CFR 261 Identification and Listing of Hazardous Waste

4430     40 CFR 262 Standards Applicable to Generators of Hazardous Waste

4431     40 CFR 262.22 Number of Copies

4432     40 CFR 263 Standards Applicable to Transporters of Hazardous Waste

4433     40 CFR 264 Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities

4434     40 CFR 265 Interim Status Standards for Owners and Operators of Hazardous Waste Treatment, Storage, and Disposal Facilities

4435     40 CFR 266 Standards for the Management of Specific Hazardous Wastes and Specific Types of Hazardous Waste

4436     40 CFR 268 Land Disposal Restrictions

4437     40 CFR 270 EPA Administered Permit Programs: The Hazardous Waste Permit Program

4438     40 CFR 271 Requirements for Authorization of State Hazardous Waste Programs

4439     40 CFR 272 Approved State Hazardous Waste Management Programs

4440     40 CFR 273 Standards For Universal Waste Management

4441     40 CFR 279 Standards for the Management of Used Oil

4442     40 CFR 280 Technical Standards and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks (UST)

4443     40 CFR 300 National Oil and Hazardous Substances Pollution Contingency Plan

4444     40 CFR 302 Designation, Reportable Quantities, and Notification

4445     40 CFR 355 Emergency Planning and Notification

4446     40 CFR 372-SUBPART D Specific Toxic Chemical Listings

4447     40 CFR 50 National Primary and Secondary Ambient Air Quality Standards

4448     40 CFR 50.12 National Primary and Secondary Ambient Air Quality Standards for Lead

4449     40 CFR 50.6 National Primary and Secondary Ambient Air Quality Standards for PM10

4450     40 CFR 58 Ambient Air Quality Surveillance

4451     40 CFR 60 Standards of Performance for New Stationary Sources

4452     40 CFR 61 National Emission Standards for Hazardous Air Pollutants

4453     40 CFR 61-SUBPART A General Provisions

4454     40 CFR 61-SUBPART M National Emission Standard for Asbestos

4455     40 CFR 63 National Emission Standards for Hazardous Air Pollutants for Source Categories

4456     40 CFR 68 Chemical Accident Prevention Provisions

4457     40 CFR 745 Lead-Based Paint Poisoning Prevention in Certain Residential Structures

4458     40 CFR 761 Polychlorinated Biphenyls (PCBs) Manufacturing, Processing, Distribution in Commerce, and Use Prohibitions

4459     40 CFR 761.75 Chemical Waste Landfills

4460     40 CFR 763 Asbestos

4461     40 CFR 82 Protection of Stratospheric Ozone

4462     42 CFR 84 Approval of Respiratory Protective Devices

4463     47 CFR 15 Radio Frequency Devices

4464     47 CFR 17 Construction, Marking, and Lighting of Antenna Structures

4465     47 CFR 18 (2011) Industrial, Scientific, and Medical Equipment

4466     47 CFR 25 Satellite Communications

4467     47 CFR 68 Connection of Terminal Equipment to the Telephone Network

4468     47 CFR 76 Multichannel Video and Cable Television Service

4469     47 CFR 76.605 Technical Standards

4470     47 CFR 90 Private Land Mobile Radio Services

4471     48 CFR 23 Environment, Energy and Water Efficiency, Renewable Energy Technologies, Occupational Safety, and Drug-Free Workplace

4472     49 CFR 107 Hazardous Materials Program Procedures

4473     49 CFR 171 General Information, Regulations, and Definitions

4474     49 CFR 171 – 178 Hazardous Materials Regulations

4475     49 CFR 172 Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, and Training Requirements

4476     49 CFR 173 Shippers – General Requirements for Shipments and Packagings

4477     49 CFR 173.301 Shipment of Compressed Gases in Cylinders and Spherical Pressure Vessels

4478     49 CFR 174 Carriage by Rail

4479     49 CFR 175 Carriage by Aircraft

4480     49 CFR 176 Carriage by Vessel

4481     49 CFR 177 Carriage by Public Highway

4482     49 CFR 178 Specifications for Packagings

4483     49 CFR 179 Specifications for Tank Cars

4484     49 CFR 192 Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards

4485     49 CFR 195 Transportation of Hazardous Liquids by Pipeline

4486     77 FR 12286 Final National Pollutant Discharge Elimination System (NPDES) General Permit for Stormwater Discharges from Construction Activities

4487     CPL 2.100 (1995) Application of the Permit-Required Confined Spaces (PRCS) Standards, 29 CFR 1910.146

4488     PL 102-486 (1992) Residential Energy Efficiency Ratings

4489     PL 109-58 Energy Policy Act of 2005 (EPAct05)

4490     U.S. NAVAL FACILITIES ENGINEERING COMMAND (NAVFAC)

4491     NAVFAC A-A-50570 (1997) Paint, Water-Borne, Acrylic Or Modified Acrylic, Semigloss, For Metal Surfaces

4492     NAVFAC MO 225 (1990) Industrial Water Treatment

4493     NAVFAC MO 324 (1992) Inspection and Certification of Boilers and Unfired Pressure Vessels

4494     NAVFAC P-307 (2009; Change 1 Mar 2011; Change 2 Aug 2011)Management of Weight Handling Equipment

4495     ND OPNAVINST 5100.23 (2005; Rev G) Navy Occupational Safety and Health (NAVOSH) Program Manual

4496     TR-NAVFAC ESC-CI-1215 (2012) Navy User’s Guide for Quality Assurance of New Concrete Construction

4497     U.S. NAVAL FACILITIES ENGINEERING SERVICE CENTER (NFESC)

4498     NFESC CR 80.025 (1980) Testing and Evaluation of Attack Resistance and Hardening Retrofits of Marine Barrack Construction Types to Small Arms Multiple Impact Threat

4499     U.S. NAVAL SEA SYSTEMS COMMAND (NAVSEA)

4500     NAVSEA T9074-AS-GIB-010/2(711999; Notice 1) Requirements for Nondestructive Testing Methods

4501     QPL-19140 (2011) Lumber and Plywood, Fire-Retardant Treated

4502     QPL-24109 (2012) Valve, Globe, Angle, Quick Change Cartridge Trim, High Pressure (H.P.) Hydraulic and Pneumatic (Sizes 1/8 – 1-1/4 Inches)

4503     QPL-26202 (2011) Light, Marker, Airport, Semiflush, General Specification for

4504     UL ENVIRONMENT (ULE)

4505     ULE Greenguard UL Greenguard Certification Program

4506     UNDERWRITERS LABORATORIES (UL)

4507     UL 1 (2005; Reprint Jul 2012) Standard for Flexible Metal Conduit

4508     UL 1004-1 (2012; Reprint Sep 2013) Standard for Safety Rotating Electrical Machines

4509     UL 1008 (2012; Reprint Apr 2013) Transfer Switch Equipment

4510     UL 1012 (2010; Reprint Jan 2012) Power Units Other than Class 2

4511     UL 1025 (1980; R 1990, Bul. 1991) Electric Air Heaters

4512     UL 1029 (1994; Reprint Dec 2013) High-Intensity-Discharge Lamp Ballasts

4513     UL 1034 (2011) Burglary-Resistant Electric Locking Mechanisms

4514     UL 1037 (1999; Reprint Dec 2009) Safety Antitheft Alarms and Devices

4515     UL 1042 (2009; Reprint Jun 2013) Electric Baseboard Heating Equipment

4516     UL 1059 (2001; Reprint Oct 2011) Standard for Terminal Blocks

4517     UL 1063 (2006; Reprint Jul 2012) Machine-Tool Wires and Cables

4518     UL 1066 (2012; Reprint Jul 2013) Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures

4519     UL 1067 (2011) Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations

4520     UL 1069 (2007; Reprint Apr 2012) Hospital Signaling and Nurse Call Equipment

4521     UL 1072 (2006; Reprint Jun 2013) Medium-Voltage Power Cables

4522     UL 1076 (1995; Reprint Sep 2010) Proprietary Burglar Alarm Units and Systems

4523     UL 1086 (2005; Reprint Jun 2010) Standard for Household Trash Compactors

4524     UL 109 (1997; Reprint Aug 2013) Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use

4525     UL 10A (2009; Reprint Dec 2013) Standard for Tin-Clad Fire Doors

4526     UL 10B (2008; Reprint Apr 2009) Fire Tests of Door Assemblies

4527     UL 10C (2009) Standard for Positive Pressure Fire Tests of Door Assemblies

4528     UL 1203 (2013) UL Standard for Safety Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations

4529     UL 1236 (2006; Reprint Jul 2011) Standard for Battery Chargers for Charging Engine-Starter Batteries

4530     UL 1242 (2006; Reprint Jul 2012) Standard for Electrical Intermediate Metal Conduit — Steel

4531     UL 1247 (2007; Reprint Jun 2011) Diesel Engines for Driving Stationary Fire Pumps

4532     UL 125 (2009; Reprint Nov 2011) Safety Flow Control Valves for Anhydrous Ammonia and LP-Gas

4533     UL 1256 (2002; Reprint Jul 2013) Fire Test of Roof Deck Constructions

4534     UL 1283 (2005; Reprint Feb 2013) Electromagnetic Interference Filters

4535     UL 1286 (2008; Reprint Sep 2013) Office Furnishings

4536     UL 1310 (2011; Reprint Oct 2013) UL Standard for Safety Class 2 Power Units

4537     UL 1316 (1994; Reprint May 2006) Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures

4538     UL 140 (2006; Reprint Aug 2012) Relocking Devices for Safes and Vaults

4539     UL 142 (2006; Reprint Jul 2013) Steel Aboveground Tanks for Flammable and Combustible Liquids

4540     UL 1437 (2006) Electrical Analog Instruments – Panel Board Types

4541     UL 1449 (2006; Reprint Sep 2013) Surge Protective Devices

4542     UL 1479 (2003; Reprint Oct 2012) Fire Tests of Through-Penetration Firestops

4543     UL 1480 (2003; Reprint Oct 2012) Standard for Speakers for Fire Alarm, Emergency, and Commercial and Professional Use

4544     UL 1492 (1996; Reprint Jul 2013) Audio-Video Products and Accessories

4545     UL 14B (2008; Reprint May 2013) Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

4546     UL 14C (2006; Reprint May 2013) Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs

4547     UL 154 (2005; Reprint Nov 2010) Carbon-Dioxide Fire Extinguishers

4548     UL 155 (2000; Reprint Aug 2013) Standard Tests for Fire Resistance of Vault and File Room Doors

4549     UL 1558 (1999; Reprint Apr 2010) Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear

4550     UL 1561 (2011; Reprint Sep 2012) Dry-Type General Purpose and Power Transformers

4551     UL 1569 (1999; Reprint Jan 2012) Standard for Metal-Clad Cables

4552     UL 1581 (2001; Reprint Aug 2013) Electrical Wires, Cables, and Flexible Cords

4553     UL 1598 (2008; Reprint Oct 2012) Luminaires

4554     UL 1610 (1998; Reprint Sep 2010) Standard for Central-Station Burglar-Alarm Units

4555     UL 1635 (1996; Reprint Jan 2010) Digital Alarm Communicator System Units

4556     UL 1638 (2001; Reprint Oct 2013) Visual Signaling Appliances – Private Mode Emergency and General Utility Signaling

4557     UL 1660 (2004; Reprint Apr 2013) Liquid-Tight Flexible Nonmetallic Conduit

4558     UL 1666 (2007; Reprint Jun 2012) Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts

4559     UL 1686 (2012; Reprint Jan 2014) Standard for Pin and Sleeve Configurations

4560     UL 1699 (2006; Reprint Nov 2013) Arc-Fault Circuit-Interrupters

4561     UL 1738 (2010; Reprint May 2011) Venting Systems for Gas-Burning Appliances, Categories II, III and IV

4562     UL 174 (2004; Reprint Sep 2012) Household Electric Storage Tank Water Heaters

4563     UL 1746 (2007; Reprint May 2012) External Corrosion Protection Systems for Steel Underground Storage Tanks

4564     UL 1778 (2005; Reprint Oct 2011) Uninterruptible Power Systems

4565     UL 181 (2013) Factory-Made Air Ducts and Air Connectors

4566     UL 181A (2013) Standard for Closure Systems for Use with Rigid Air Ducts and Air Connectors

4567     UL 181B (2013) Standard for Closure Systems for Use with Flexible Air Ducts and Air Connectors

4568     UL 1863 (2004; Reprint Nov 2012) Communication Circuit Accessories

4569     UL 19 (2013) Lined Fire Hose and Hose Assemblies

4570     UL 1951 (2011) Electric Plumbing Accessories

4571     UL 197 (2010; Reprint Sep 2013) Commercial Electric Cooking Appliances

4572     UL 1971 (2002; Reprint Oct 2008) Signaling Devices for the Hearing Impaired

4573     UL 1981 (2003; Reprint Jun 2012) Standard for Central Station Automation Systems

4574     UL 198M (2003; Reprint Feb 2013) Standard for Mine-Duty Fuses

4575     UL 1995 (2011) Heating and Cooling Equipment

4576     UL 1996 (2009; Reprint Nov 2011) Electric Duct Heaters

4577     UL 20 (2010; Reprint Feb 2012) General-Use Snap Switches

4578     UL 2017 (2008; Reprint May 2011) General-Purpose Signaling Devices and Systems

4579     UL 2034 (2008; Reprint Feb 2009) Single and Multiple Station Carbon Monoxide Alarms

4580     UL 2043 (2013) Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces

4581     UL 2050 (2003; 4th Edition) Standard for National Industrial Security Systems for the Protection of Classified Materials (limited distribution publication, direct purchase request with justification to UL)

4582     UL 207 (2009; Reprint Jul 2013) Refrigerant-Containing Components and Accessories, Nonelectrical

4583     UL 2079 (2004; Reprint Dec 2012) Tests for Fire Resistance of Building Joint Systems

4584     UL 2085 (1997; Reprint Sep 2010) Protected Aboveground Tanks for Flammable and Combustible Liquids

4585     UL 209 (2011) Cellular Metal Floor Raceways and Fittings

4586     UL 2127 (2012; Reprint Jul 2013) Inert Gas Clean Agent Extinguishing System Units

4587     UL 2129 (2005; Reprint Mar 2012) Halocarbon Clean Agent Fire Extinguishers

4588     UL 214 (1997; Rev thru Aug 2001) Tests for Flame-Propagation of Fabrics and Films

4589     UL 2166 (2012; Reprint Jul 2013) Halocarbon Clean Agent Extinguishing System Units

4590     UL 2218 (2010; Reprint May 2012) UL Standard for Safety Impact Resistance of Prepared Roof Covering MaterialsRef Title

4591     UL 228 (2006; Reprint Nov 2008) Door Closers-Holders, With or Without Integral Smoke Detectors

4592     UL 231 (2008; Reprint Jun 2010) Power Outlets

4593     UL 246 (2011; Reprint Feb 2013) Hydrants for Fire-Protection Service

4594     UL 248-1 (2011) Low Voltage Fuses – Part 1: General Requirements

4595     UL 248-12 (2011) Low Voltage Fuses – Part 12: Class R Fuses

4596     UL 250 (1993; Reprint Feb 2013) Household Refrigerators and Freezers

4597     UL 262 (2004; Reprint Oct 2011) Gate Valves for Fire-Protection Service

4598     UL 263 (2011) Fire Tests of Building Construction and Materials

4599     UL 268 (2009) Smoke Detectors for Fire Alarm Systems

4600     UL 268A (2008; Reprint Sep 2009) Smoke Detectors for Duct Application

4601     UL 294 (2013) Access Control System Units

4602     UL 296 (2003; Reprint Sep 2013) Oil Burners

4603     UL 299 (2012) Dry Chemical Fire Extinguishers

4604     UL 312 (2010) Check Valves for Fire-Protection Service

4605     UL 325 (2013) Door, Drapery, Gate, Louver, and Window Operators and Systems

4606     UL 33 (2010) Heat Responsive Links for Fire-Protection Service

4607     UL 330 (2009; Reprint Aug 2013) UL Standard for Safety Hose and Hose Assemblies for Dispensing Flammable Liquids

4608     UL 346 (2005; Reprint Nov 2009) Waterflow Indicators for Fire Protective Signaling Systems

4609     UL 353 (1994; Reprint Nov 2011) Standard for Limit Controls

4610     UL 360 (2013; Reprint May 2013) Liquid-Tight Flexible Steel Conduit

4611     UL 38 (2008; Reprint Nov 2013) Manual Signaling Boxes for Fire Alarm Systems

4612     UL 4 (2004; Reprint Oct 2013) Standard for Armored Cable

4613     UL 412 (2011; Reprint Sep 2013) Standard for Refrigeration Unit Coolers

4614     UL 4248 (2007) UL Standard for Safety Fuseholders

4615     UL 4248-1 (2007; Reprint Oct 2013) UL Standard for Safety Fuseholders – Part 1: General Requirements

4616     UL 4248-12 (2007; Reprint Dec 2012) UL Standard for Safety Fuseholders – Part 12: Class R

4617     UL 427 (2011; Reprint Feb 2013) Refrigerating Units

4618     UL 429 (2013) Electrically Operated Valves

4619     UL 430 (2009; Reprint Oct 2013) Standard for Waste Disposers

4620     UL 437 (2013) Key Locks

4621     UL 44 (2010) Thermoset-Insulated Wires and Cables

4622     UL 441 (2010; Reprint May 2010) Gas Vents

4623     UL 444 (2008; Reprint Apr 2010) Communications Cables

4624     UL 448 (2007; Reprint Jul 2013) Centrifugal Stationary Pumps for Fire-Protection Service

4625     UL 464 (2009; Reprint Apr 2012) Standard for Audible Signal Appliances

4626     UL 467 (2007) Grounding and Bonding Equipment

4627     UL 471 (2010; Reprint Jun 2013) Commercial Refrigerators and Freezers

4628     UL 484 (2014) Standard for Room Air Conditioners

4629     UL 486A-486B (2013; Reprint Dec 2013) Wire Connectors

4630     UL 486C (2013; Reprint Dec 2013) Splicing Wire Connectors

4631     UL 486E (2009; Reprint May 2013) Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors

4632     UL 489 (2013) Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures

4633     UL 497 (2001; Reprint Jul 2013) Protectors for Paired Conductor Communication Circuits

4634     UL 497B (2004; Reprint Dec 2012) Protectors for Data Communication Circuits

4635     UL 498 (2012; Reprint Aug 2013) Attachment Plugs and Receptacles

4636     UL 499 (2005; Reprint Feb 2013) Electric Heating Appliances

4637     UL 5 (2011) Surface Metal Raceways and Fittings

4638     UL 50 (2007; Reprint Apr 2012) Enclosures for Electrical Equipment, Non-environmental Considerations

4639     UL 506 (2008; Reprint Oct 2013) Specialty Transformers

4640     UL 507 (1999; Reprint Jun 2012) Standard for Electric Fans

4641     UL 508 (1999; Reprint Oct 2013) Industrial Control Equipment

4642     UL 5085-3 (2006; Reprint Nov 20121) Low Voltage Transformers – Part 3: Class 2 and Class 3 Transformers

4643     UL 508A (2013; Reprint Jan 2014) Industrial Control Panels

4644     UL 508C (2002; Reprint Nov 2010) Power Conversion Equipment

4645     UL 510 (2005; Reprint Jul 2013) Polyvinyl Chloride, Polyethylene and Rubber Insulating Tape

4646     UL 512 (1993; R 1993 thru 2008) Standard for Fuseholders

4647     UL 514A (2013) Metallic Outlet Boxes

4648     UL 514B (2012) Conduit, Tubing and Cable Fittings

4649     UL 514C (1996; Reprint Nov 2011) Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers

4650     UL 521 (1999; Reprint May 2010) Heat Detectors for Fire Protective Signaling Systems

4651     UL 536 (1997; Reprint Jun 2003) Flexible Metallic Hose

4652     UL 544 (1998; R 1999) Standard for Medical and Dental Equipment

4653     UL 555 (2006; Reprint May 2012) Standard for Fire Dampers

4654     UL 555S (2014) Smoke Dampers

4655     UL 567 (2003; Reprint Oct 2011) Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas

4656     UL 574 (2003; Reprint Oct 2013) Standard for Electric Oil Heaters

4657     UL 58 (1996; Reprint Jul 1998) Steel Underground Tanks for Flammable and Combustible Liquids

4658     UL 580 (2006; Reprint Oct 2013) Tests for Uplift Resistance of Roof Assemblies

4659     UL 586 (2009) Standard for High-Efficiency Particulate, Air Filter Units

4660     UL 595 (1985) Marine-Type Electric Lighting Fixtures

4661     UL 5A (2003; Reprint Jun 2013) Nonmetallic Surface Raceways and Fittings

4662     UL 6 (2007; reprint Nov 2010) Electrical Rigid Metal Conduit-Steel

4663     UL 60601-1 (2003; Reprint Apr 2006) Medical Electrical Equipment, Part 1: General Requirements for Safety

4664     UL 609 (1996; Reprint Sep 2010) Local Burglar Alarm Units and Systems

4665     UL 60950 (2000; Reprint Oct 2007) Safety of Information Technology Equipment

4666     UL 626 (2005; Reprint Mar 2012) 2-1/2 Gallon Stored-Pressure, Water-Type Fire Extinguishers

4667     UL 632 (2000) Standard for Electrically-Actuated Transmitters

4668     UL 634 (2007; Reprint Mar 2013) Connectors and Switches for Use with Burglar-Alarm Systems

4669     UL 636 (1996; Reprint Jan 2013) Holdup Alarm Units and Systems

4670     UL 639 (2007; Reprint May 2012) Standard for Intrusion Detection Units

4671     UL 641 (2010; Reprint Jun 2013) Type L Low-Temperature Venting Systems

4672     UL 651 (2011; Reprint Mar 2012) Standard for Schedule 40 and 80 Rigid PVC Conduit and Fittings

4673     UL 651A (2011) Type EB and A Rigid PVC Conduit and HDPE Conduit

4674     UL 668 (2004; Reprint Dec 2012) Hose Valves for Fire-Protection Service

4675     UL 67 (2009; Reprint Jan 2013) Standard for Panelboards

4676     UL 674 (2011; Reprint Jul 2013) Electric Motors and Generators for Use in Division 1 Hazardous (Classified) Locations

4677     UL 681 (2014) Installation and Classification of Burglar and Holdup Alarm Systems

4678     UL 6A (2008; Reprint May 2013) Electrical Rigid Metal Conduit – Aluminum, Red Brass, and Stainless Steel

4679     UL 705 (2004; Reprint Dec 2013) Standard for Power Ventilators

4680     UL 710 (2012) Exhaust Hoods for Commercial Cooking Equipment

4681     UL 719 (2006; Reprint Apr 2013) Nonmetallic-Sheathed Cables

4682     UL 723 (2008; Reprint Aug 2013) Test for Surface Burning Characteristics of Building Materials

4683     UL 726 (1995; Reprint Oct 2013) Oil-Fired Boiler Assemblies

4684     UL 727 (2006; Reprint Oct 2013) Standard for Oil-Fired Central Furnaces

4685     UL 731 (1995; Reprint Oct 2013) Standard for Oil-Fired Unit Heaters

4686     UL 732 (1995; Reprint Oct 2013) Oil-Fired Storage Tank Water Heaters

4687     UL 746C (2004; Reprint Aug 2013) Polymeric Materials – Use in Electrical Equipment Evaluations

4688     UL 749 (2013; Reprint May 2013) Household Dishwashers

4689     UL 752 (2005; Reprint Jul 2011) Standard for Bullet-Resisting Equipment

4690     UL 763 (2012; Reprint Nov 2013) Standard for Motor-Operated Commercial Food Preparing Machines

4691     UL 768 (2006; Reprint Jul 2013) Standard for Combination Locks

4692     UL 773 (1995; Reprint Mar 2002) Standard for Plug-In, Locking Type Photocontrols for Use with Area Lighting

4693     UL 773A (2006; Reprint Nov 2013) Standard for Nonindustrial Photoelectric Switches for Lighting Control

4694     UL 778 (2010; Reprint May 2012) Standard for Motor-Operated Water Pumps

4695     UL 779 (2011) Standard for Electrically Conductive Floorings

4696     UL 789 (2004; Reprint Feb 2013) Standard for Indicator Posts for Fire-Protection Service

4697     UL 790 (2004; Reprint Jul 2013) Standard Test Methods for Fire Tests of Roof Coverings

4698     UL 795 (2011; Reprint Nov 2013) Standard for Commercial-Industrial Gas Heating Equipment

4699     UL 796 (2010; Reprint Sep 2013) Standard for Printed-Wiring Boards

4700     UL 797 (2007; Reprint Dec 2012) Electrical Metallic Tubing

4701     UL 8 (2005; Reprint Jun 2011) Water Based Agent Fire Extinguishers

4702     UL 80 (2007; Reprint Jan 2014) Standard for Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids

4703     UL 817 (2001; Reprint Feb 2014) Standard for Cord Sets and Power-Supply Cords

4704     UL 823 (2006; Reprint Jan 2012) Standard for Electric Heaters for Use in Hazardous (Classified) Locations

4705     UL 827 (2008; Reprint Jul 2013) Standard for Central-Station Alarm Services

4706     UL 83 (2008) Thermoplastic-Insulated Wires and Cables

4707     UL 842 (2007; Reprint Oct 2013) Standard for Valves for Flammable Fluids

4708     UL 844 (2012) Standard for Luminaires for Use in Hazardous (Classified) Locations

4709     UL 845 (2005; Reprint Jul 2011) Motor Control Centers

4710     UL 854 (2004; Reprint Sep 2011) Standard for Service-Entrance Cables

4711     UL 857 (2009; Reprint Dec 2011) Busways

4712     UL 858 (2005; Reprint Jul 2013) Standard for Household Electric Ranges

4713     UL 860 (2001) Pipe Unions for Flammable and Combustible Fluids and Fire-Protection Service

4714     UL 864 (2003; Reprint Aug 2012) Standard for Control Units and Accessories for Fire Alarm Systems

4715     UL 869A (2006) Reference Standard for Service Equipment

4716     UL 87 (2001; Reprint Jun 2008) UL Standard for Safety Power-Operated Dispensing Devices for Petroleum Products

4717     UL 870 (2008; Reprint Feb 2013) Standard for Wireways, Auxiliary Gutters, and Associated Fittings

4718     UL 873 (2007; Reprint Aug 2013) Standard for Temperature-Indicating and -Regulating Equipment

4719     UL 8750 (2009; Reprint Sep 2013) UL Standard for Safety Light Emitting Diode (LED) Equipment for Use in

4720     UL 891 (2005; Reprint Oct 2012) Switchboards

4721     UL 9 (2009) Standard for Fire Tests of Window Assemblies

4722     UL 900 (2004; Reprint Feb 2012) Standard for Air Filter Units

4723     UL 913 (2013) UL Standard for Safety Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations

4724     UL 916 (2007; Reprint Dec 2013) Standard for Energy Management Equipment

4725     UL 921 (2006; Reprint Jul 2012) Commercial Dishwashers

4726     UL 923 (2013) Standard for Microwave Cooking Appliances

4727     UL 924 (2006; Reprint Feb 2011) Standard for Emergency Lighting and Power Equipment

4728     UL 935 (2001; Reprint Dec 2013) Standard for Fluorescent-Lamp Ballasts

4729     UL 94 (2013) Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances

4730     UL 943 (2006; Reprint Jun 2012) Ground-Fault Circuit-Interrupters

4731     UL 96 (2005; Reprint Sep 2013) Standard for Lightning Protection Components

4732     UL 969 (1995; Reprint Nov 2008) Standard for Marking and Labeling Systems

4733     UL 96A (2007; Reprint Jan 2014) Standard for Installation Requirements for Lightning Protection Systems

4734     UL 972 (2006; Reprint Jul 2011) Standard for Burglary Resisting Glazing Material Type

4735     UL 98 (2004; Reprint May 2012) Enclosed and Dead-Front Switches

4736     UL 984 (1996; Reprint Sep 2005) Hermetic Refrigerant Motor-Compressors

4737     UL Bld Mat Dir (2012) Building Materials Directory

4738     UL Elec Equip Dir (2011) Electrical Appliance and Utilization Equipment Directory

4739     UL Electrical Appliance (2012) Electrical Appliance and Utilization Equipment Directory

4740     UL Electrical Constructn(2012) Electrical Construction Equipment Directory

4741     UL FLAMMABLE & COMBUSTIBL(E2012) Flammable and Combustible Liquids and Gases Equipment Directory

4742     UL Fire Prot Dir (2012) Fire Protection Equipment Directory

4743     UL Fire Resistance (2012) Fire Resistance Directory

4744     UL MEAPD (2011) Mechanical Equipment and Associated Products Directory (online version is listed under Certifications at www.ul.com)

4745     UL RMSD (2012) Roofing Materials and Systems Directory

4746     UL Subject 87A (2014) Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) UNI-BELL PVC PIPE ASSOCIATION (UBPPA)

4747     UBPPA UNI-B-6 (1998) Recommended Practice for Low-Pressure Air Testing of Installed Sewer Pipe

4748     UBPPA UNI-PUB-08 (2010) Tapping Guide for PVC Pressure Pipe)

4749     WASHINGTON STATE ADMINISTRATIVE CODE (WAC)

4750     WAC-173-160 Minimum Standards for Construction and Maintenance of Wells

4751     WAC-173-303 Washington Dangerous Waste Regulations

4752     WAC-173-350 Solid Waste Handling Standards

4753     WAC-173-60 Maximum Environmental Noise Levels

4754     WAC-222-30 Timber Harvesting

4755     WAC-246-290 Department of Health Drinking Water Regulation

4756     WASHINGTON STATE DEPARTMENT OF ECOLOGY (WSDE)

4757     WSDE SMM (2012) Washington State Stormwater Management Manual for Western Washington

4758     WATER ENVIRONMENT FEDERATION (WEF)

4759     WEF MOP 11 (2007) Operation of Municipal Wastewater Treatment Plants

4760     WATER QUALITY ASSOCIATION (WQA)

4761     WQA S-100 (2000) Standard for Household, Commercial and Portable Exchange Water Softeners

4762     WEST COAST LUMBER INSPECTION BUREAU (WCLIB)

4763     WCLIB 17 (2004) Standard Grading Rules

4764     WESTERN WOOD PRESERVERS INSTITUTE (WWPI)

4765     WWPI Mgt Practices (1996; R 2011) Best Management Practices for the Use of Treated Wood in Aquatic Environments

4766     WESTERN WOOD PRODUCTS ASSOCIATION (WWPA)

4767     WWPA G-5 (2011) Western Lumber Grading Rules

4768     WWPA Tech Guide (2005) Lumber Technical Guide, Standards and Grading

4769     WINDOW AND DOOR MANUFACTURERS ASSOCIATION (WDMA)

4770     ANSI/WDMA I.S.1A (2013) Interior Architectural Wood Flush Doors

4771     ANSI/WDMA I.S.6A (2013) Interior Architectural Stile and Rail Doors

4772     WDMA I.S.4 (2013) Preservative Treatment for Millwork

4773     WDMA TM-7 (2008) Cycle Slam Test Method

4774     WDMA TM-8 (2008) Hinge Loading Test Method

4775     WIRE ROPE TECHNICAL BOARD (WRTB)

4776     WRTB (2005) Wire Rope Users Manual

4777     WOOD MOULDING AND MILLWORK PRODUCERS ASSOCIATION (WMMPA)

4778     WMMPA WM 6 (1987) Industry Standard for Non-Pressure Treating