5. PRE-STRESSED CONCRETE

건설자재 시험 및 인증 관련 규격목록 5

5. PRE-STRESSED CONCRETE

5-1) BDS ISO 10065: 2006 ; Steel bars reinforcement of concrete– Bend and Rebend tests

5-2) BDS ISO 10144:2006 ; Certification scheme for steel bars and wires for the reinforcement of concrete structures.

5-3) BDS ISO 15630-1 : 2008 ; Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, wire rod and wire

5-4) BDS ISO 15630-2 : 2008 ; Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric

5-5) BDS ISO 15630-3 : 2008 ; Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel

5-6) BDS ISO 15835-1:2010 ; Steel for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars —Part 1: 요구 사항

5-7) BDS ISO 15835-2:2010 ; Steel for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars —Part 2: 시험 방법

5-8) BDS ISO 16020 : 2008 ; Steel for the reinforcement and prestressing of concrete — Vocabulary

5-9) BDS ISO 6934 – 1 : 2008 ; Steel for the prestressing of concrete – Part 1: 일반 요구 사항

5-10) BDS ISO 6934 – 2 : 2008 ; Steel for the prestressing of concrete – Part 2 Cold-drawn wire

5-11) BDS ISO 6934 – 3 : 2008 ; Steel for the prestressing of concrete – Part 3 Quenched and tempered wire

5-12) BDS ISO 6934 – 4 : 2008 ; Steel for the prestressing of concrete – Part 4 Strand

5-13) BDS ISO 6934- 5: 2008 ; Steel for the prestressing of concrete – Part 5 Hot-rolled steel bars with or without subsequent processing

5-14) BDS ISO 6935 (Part-1): 2010 (1st revision) ; Steel for the re-enforcement of concrete – Part-1: Plain bars

5-15) BDS ISO 6935 (Part-2): 2010 (1st revision) ; Steel for the reinforcement of concrete – Part-2: Ribbed bars

5-16) BDS ISO 6935 (Part-3): 2006 ; Steel for the reinforcement of concrete – Part-3: Welded Fabric. Specifies technical requirements for factory made sheets or rolls welded fabric manufacture from steel wires or bars with diameters from 4 mm to 16 mm and designed for reinforcement in ordinary concrete structured and for non-prestressed reinforcement in prestressed concrete structures.

4. Asbestos Cement Products

건설자재 시험 및 인증 관련 규격목록 4

4. Asbestos Cement Products

4-1) ASTM C222 – 97(2008) ; Standard Specification for Asbestos-Cement Roofing Shingles

4-2) ASTM C223 – 98(2008) ; Standard Specification for Asbestos-Cement Siding

4-3) ASTM C500 – 07 ; Standard Test Methods for Asbestos-Cement Pipe

4-4) ASTM C508 / C508M – 00(2009)e1 ; Standard Specification for Asbestos-Cement Underdrain Pipe

4-5) ASTM C663 – 98(2008) ; Standard Specification for Asbestos-Cement Storm Drain Pipe

4-6) ASTM C875 – 98(2008) ; Standard Specification for Asbestos-Cement Conduit

4-7) ASTM C966 – 98(2008) ; Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

4-8) BDS 1046:1983 ; Specification for Asbestos Cement Products-Corrugated Sheets and Fittings for Roofing and Cladding;

4-9) BDS 428:1964 ; Specification for Asbestos Cement Pressure Pipes (under revision);

4-10) BDS 429:1964 ; Specification for Asbestos Cement Building and Sanitary Pipes (under revision);

4-11) BDS 430:1964 ; Specification for Asbestos Cement Corrugated Sheets for Roofing and Cladding (under revision);

4-12) BDS 431:1964 ; Specification for Asymmetrical Section Corrugated Sheets in Asbestos Cement for Roofing and Cladding (under revision);

4-13) BDS 579:1966 ; Specification for Asbestos Cement Flat Sheets (under revision);

3. Concrete Pipe and Precast Sections

건설자재 시험 및 인증 관련 규격목록 3

3. Concrete Pipe and Precast Sections

3-1) ASTM C1433M – 10 ; Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (미터)

3-2) ASTM C14M – 07 ; Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (미터)

3-3) ASTM C361M – 08 ; Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (미터)

3-4) ASTM C444M – 03(2009) ; Standard Specification for Perforated Concrete Pipe (미터)

3-5) ASTM C478M – 09 ; Standard Specification for Precast Reinforced Concrete Manhole Sections (미터)

3-6) ASTM C507M – 10a ; Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (미터)

3-7) ASTM C654M – 05a ; Standard Specification for Porous Concrete Pipe (미터)

3-8) ASTM C655M – 09 ; Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (미터)

3-9) ASTM C76M – 10a ; Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (미터)

3-10) ASTM C858 – 10 ; Standard Specification for Underground Precast Concrete Utility Structures

3-11) ASTM C891 – 09 ; Standard Practice for Installation of Underground Precast Concrete Utility Structures

3-12) ASTM C913 – 08 ; Standard Specification for Precast Concrete Water and Wastewater Structures

3-13) ASTM C924M – 02(2009) ; Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (미터)

3-14) BDS 1626:1999 ; Concrete pipes (with and without) reinforcement

3-15) IS 1916:1989 ; Specification for steel cylinder pipewith concrete lining and coating(first revision)

3-16) IS 3597:1998 ; Methods of test for concrete pipes (second revision)

3-17) IS 4350:1967 ; Specification for concrete porous pipes for under drainage

3-18) IS 458:2003 ; Specification for precast concrete pipes (with and without reinforcement) (fourth revision)

3-19) IS 7319:1974 ; Specification for perforated concrete pipes

3-20) IS 7322:1985 ; Specification for specials for steel cylinder reinforced concrete pipes (first revision)

3-21) IS 784:2001 ; Specification for prestressed concrete pipes (including specials) (second revision)

2. CEMENT AND CONCRETE

건설자재 시험 및 인증 관련 규격목록 2

2. CEMENT AND CONCRETE

2-1) ASTM C172 – 08 ; Standard Practice for Sampling Freshly Mixed Concrete

2-2) ASTM C192 / C192M – 07 ; Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

2-3) ASTM C31 / C31M – 09 ; Standard Practice for Making and Curing Concrete Test Specimens in the Field

2-4) ASTM C317 / C317M – 00(2005) ; Standard Specification for Gypsum Concrete

2-5) ASTM C39 / C39M – 09a ; Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

2-6) ASTM C42 / C42M – 04 ; Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

2-7) ASTM C496 / C496M – 04e1 ; Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

2-8) ASTM C617 – 09a ; Standard Practice for Capping Cylindrical Concrete Specimens

2-9) ASTM C685 / C685M – 10 ; Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

2-10) ASTM C78 – 09 ; Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

2-11) ASTM C94 / C94M – 09a ; Standard Specification for Ready-Mixed Concrete

2-12) ASTM C989 – 09a ; Standard Specification for Slag Cement for Use in Concrete and Mortars

2-13) BDS 240:1963 ; Specification for Plain Cold Drawn Steel Wire for Prestressed Concrete;

2-14) BDS 243:1963 ; Specification for Coarse and Fine Aggregates from Natural Sources for Concrete;

2-15) BDS 279:1963 ; Specification for Abrasion of Coarse Aggregates by Use of Los Angeles Machine (under revision);

2-16) BDS 281:1963 ; Specification for Organic Impurities in Sands for Concrete (under revision);

2-17) BDS 921:1980 ; Specification for Standard Sand for Testing of Cement;

2-18) BDS EN 934-1:2008 ; 콘크리트 용 혼화제, mortar and grout — Part 1: 일반 요구 사항

2-19) BDS EN 934-2:2008 ; 콘크리트 용 혼화제, mortar and grout — Part 2: Concrete admixtures — Definitions, 요구 사항, 적합성, marking and

2-20) BDS ISO 1920-10: 2011 ; Testing of Concrete — Part 10: Determination of static modulus of elasticity in compression

2-21) BDS ISO 1920-8: 2010 ; Testing of Concrete — Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory

2-22) BDS ISO 1920-9: 2010 ; Testing of Concrete — Part 9: Determination of creep of concrete cylinders in compression

2-23) BDS ISO 22965-1: 2008 ; Concrete — Part 1: Methods of specifying and guidance for the specifier

2-24) BDS ISO 22965-2: 2008 ; Concrete — Part 2: Specification of constituent materials, production of concrete and compliance of concrete

1. Standard for Masonry

건설자재 시험 및 인증 관련 규격목록 1

1. Standards for Masonry

1-1) ANSI A108.1-2009 ; Specifications for the Installation of Ceramic Tile with Portland Cement Mortar;

1-2) ANSI A108.1A—2009 ; Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar

1-3) ANSI A108.1B—2009 ; Installation of Ceramic Tile, quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-portland Mortar

1-4) ASTM A1008 / A1008M – 10 ; 철강에 대한 표준 규격, 시트, 냉연, 탄소, 구조상의, 고강도 저 합금, 개선 된 성형 성을 가진 고강도 저 합금, 솔루션 강화, 구워 경화

1-5) ASTM A183 – 03(2009) ; 탄소 강철 트랙 볼트와 너트에 대한 표준 규격

1-6) ASTM A615 / A615M – 09B ; Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

1-7) ASTM A706 / A706M – 09B ; Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

1-8) ASTM A775 / A775M – 07B ; Standard Specification for Epoxy-Coated Steel Reinforcing Bars

1-9) ASTM A82 / A82M – 07 ; Specification for Steel Wire, 평원, 콘크리트 보강 용

1-10) ASTM A996 / A996M – 09B ; Standard Specification for Rail-Steel and Axle-Steel Deformed

1-11) ASTM A996 / A996M – 09B ; Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

1-12) ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

1-13) ASTM C129 – 06 ; Standard Specification for Non-load bearing Concrete Masonry Units

1-14) ASTM C144 – 04 ; Standard Specification for Aggregate for Masonry Mortar

1-15) ASTM C150 / C150M – 09 ; Standard Specification for Portland Cement

1-16) ASTM C207 – 06 ; Standard Specification for Hydrated Lime for Masonry Purposes

1-17) ASTM C212 – 00(2006) ; Standard Specification for Structural Clay Facing Tile

1-18) ASTM C270 – 08a ; Standard Specification for Mortar for Unit Masonry

1-19) ASTM C331 – 05 ; Standard Specification for Lightweight Aggregates for Concrete Masonry Units

1-20) ASTM C34 – 09 ; Standard Specification for Structural Clay Load-Bearing Wall Tile

1-21) ASTM C404 – 07 ; Standard Specification for Aggregates for Masonry Grout

1-22) ASTM C476 – 09 ; Standard Specification for Grout for Masonry

1-23) ASTM C5-03 ; Standard Specification for Quicklime for Structural Purposes

1-24) ASTM C55 – 09 ; Standard Specification for Concrete Building Brick

1-25) ASTM C56 – 09 ; Standard Specification for Structural Clay Non load bearing Tile

1-26) ASTM C595 / C595M – 10 ; Standard Specification for Blended Hydraulic Cements

1-27) ASTM C73 – 05 ; Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

1-28) ASTM C744 – 09 ; Standard Specification for Prefaced Concrete and Calcium

1-29) ASTM C90 – 09 ; Standard Specification for Load bearing Concrete Masonry Units

1-30) ASTM C90 – 09 ; Standard Specification for Load bearing Concrete Masonry Units

1-31) ASTM C91 – 05 ; Standard Specification for Masonry Cement

1-32) BDS 1249 : 1989 ; Acid resistant bricks. It specifies the requirements for acid-resistant bricks, 치수, tolerances, test etc.

1-33) BDS 1250 : 1990 ; Burnt clay facing bricks. It specifies the dimensions, quality & strength of burnt clay facing bricks used in building & other structure, physical requirements etc.

1-34) BDS 1263 : 1990 ; Burnt Clay hollow bricks for walls & partitions it covers the dimensions, quality & strength for hollow bricks made from burnt clay & having perforations through & at right angle to the bearing surface tests.

1-35) BDS 1264 : 1990 ; Glossary of terms relating to structural clay products. It covers the definition of common terms applicable to structural clay products, used in building & civil engineering works.

1-36) BDS 1432 : 1993 ; Burnt clay perforated building bricks. Specifies the requirements in regard to dimensions, perforations, quality, strength and also for quality of surface in case of special grade for facing bricks of perforated burnt clay building bricks for use in walls and partitions.

1-37) BDS 1433 : 1993 ; Dimensions quantities in general construction work. Specifies the various dimensional values in S. I units used in general construction work.

1-38) BDS 1803 : 2008 ; Specification for Hollow Clay Bricks and Blocks

1-39) BDS 208 : 2009 ; Specification for Common Building clay bricks (Third revision)Specifies the dimensions, quality & strength of common burnt clay bricks, methods of sampling, testing etc.

1-40) BDS 238 ; Fireclay refractory bricks and shapes for general purposes. This Standard specifies the requirements for fireclay refractory bricks

1-41) BDS EN 1052-3: 2009 ; Methods of test for masonry — Part 3: 초기 전단 강도의 결정

1-42) BDS EN 13369: 2009 ; Common rules for precast concrete products

1-43) BDS EN 1338: 2009 ; Concrete paving blocks — Requirements and test methods

1-44) BDS EN 1339:2009 ; Concrete paving flags — Requirements and test methods

1-45) BDS EN 1340:2009 ; Concrete kerb units — Requirements and test methods

1-46) BDS EN 1745: 2009 ; Masonry and masonry products — Methods for determining design thermal values

1-47) BDS EN 197-1:2003 (Reaffirmed 2010) ; Cement Part-1 Composition, 일반적인 시멘트의 사양 및 적합성 기준.

1-48) BDS EN 771-3: 2009 ; Specification for masonry units—Part: 3 골재 콘크리트 벽돌 단위 (dense and lightweight aggregates)

1-49) BDS EN 772-1: 2009 ; Methods of test for masonry units — Part 1: 압축 강도의 결정

1-50) BDS EN 772-11: 2009 ; Methods of test for masonry units — Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units

1-51) BDS EN 772-13: 2009 ; Methods of test for masonry units — Part 13: Determination of net and gross dry density of masonry units (except for natural stone)

1-52) BDS EN 772-14: 2009 ; Methods of test for masonry units — Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units

1-53) BDS EN 772-16: 2009 ; Methods of test for masonry units — Part 16: Determination of dimensions

1-54) BDS EN 772-2: 2009 ; Methods of test for masonry units — Part 2: Determination of percentage area of voids in masonry units (by paper indentation)

1-55) BDS EN 772-20: 2009 ; Methods of test for masonry units — Part 20: Determination of flatness of faces of masonry units

1-56) BDS EN 772-6: 2009 ; Methods of test for masonry units — Part 6: Determination of bending tensile strength of aggregate concrete masonry units

Toy Safety Standards

아래는 세계 각국가별 Toy Safety Standards 목록입니다. Down Load : toy safety standards

Product introduction

단열 및 방음 방습 건축자재(Insulation Sheet)

대한건축사협회 우수추천자재

이러한 : +82-(0)2-433-3045(대표)

For further information, Click here. http://ondori.com/

Express lead times-Fire, Smoke and Toxicity test.

신속하게 시험을 완료할 필요가 있는 경우 아래와 같은 급행시험을 수행하는 제도를 이용하여 시험성적서를 신속하게 받아 볼수있습니다.

모든 시험이 이와 같은 급행시험수행 제도가 적용되는 것은 아니며 2일 이내 시험이 가능한 화재관련 연기독성 시험 등 특별히 정해져 있는 대상의 시험일 경우 해당됩니다.

AP Network Scope CE Marking CPD

아래 건설자재에 대하여 CE Marking 자문상담합니다.

건설 및 건축자재 유럽인증서 취득 대상

CE Mark 건축자재 인증 대상품 [ <캔버스 너비 = "81"높이 = "35"스타일 = "너비 : 81px; 명확한 :]

건설 및 토목 공사 목적물의 일부를 구성하는 모든 제품입니다. 일반적으로 건축, 건설 등 공사목적물이 완성되었을 때 목적물의 일부로써 존재하는 것들로 이해합니다.

대별하면, 시멘트류, 모르타르, 석고 등 단열재류, 바닥, 벽, 천정재류, 지붕재 및 누수방지재류 및 설비류,구조용 베어링류, 액체 보관 탱크류, 골재류, 충진재류, 닥트, 밸브 및 파이프, 캡류, 창호 및 도어류, 유리, 타일 및 내외장재류, 접착제류, 도로건설용 자재 및 설비, 교통제어 시스템류, 도로 표지판류, 화재감지 및 소방시설류, 건축용 하드웨어류, 화장실 변기류, 주방용 자재류, 조명용 기둥류, 도로 안전시설 자재류, 구조용 목재류, 굴뚝, 히터 등 난방 설비류, 폐수처리 설비, 상수도 설비 등이 있습니다.

인증 대상품목은 국한되지 않으나 다음과 같습니다.

1) 강철 구조물
2) 건물 보온 제품
3) 건물 홍수 방지장치
4) 건물의 유리
5) 건축용 하드웨어

6) 공기 히터, 버너 및 난방기
7) 교통 제어 장비
8) 교통 표지판
9) 구조 베어링
10) 구조용 목재

11) 구조용 볼트
12) 구조용 알루미늄 및 알루미늄 합금
13) 구조용 철강의 열연 제품
14) 구조용 주조물
15) 굴뚝

16) 금속 시트 및 루핑(지붕재)
17) 내장재(벽지, 바닥재 카펫트, 천정재 등)
18) 도로 표지판
19) 도로 바닥 마킹 자재
20) 라미네이트 바닥

21) 루핑 타일 및 피팅
22) 루핑용 조립식 부속품
23) 메탈 호스 어셈블리
24) 모듈형 타일 바닥과 계단 (내부 및 외부)
25) 방수 시트

26) 방진장치
27) 배관 시스템을 위한 접착제
28) 배수용 관이음
29) 벽돌
30) 보일러

31) 볼 밸브
32) 비 전기 자동 제어와 제연 장치
33) 비 합금 스틸 튜브
34) 사우나 스토브
35) 석고 기반의 접착제

36) 석고 석고 제품
37) 섬유 석고
38) 세라믹 굴뚝 라이너
39) 세라믹 연도 블록
40) 세라믹 타일

41) 소방 댐퍼
42) 소방 시스템
43) 소방경보 장치
44) 소방용기 밸브 조립과 액츄에이터
45) 소변기

46) 소화 시스템
47) 스테인리스 파이프 피팅
48) 스틸 섬유
49) 스프링 쿨러
50) 슬레이트 및 석재

51) 시멘트
52) 아스팔트
53) 알루미늄 구조물
54) 역청탄의 혼합물
55) 연기 및 열 제어 시스템

56) 오버헤드 복사 튜브 히터 시스템
57) 외부 블라인드
58) 욕조
59) 자물쇠 래치
60) 자연석

61) 장식용 라미네이트 (HPL)
62) 점토 블록
63) 접착 적층 목재
64) 정화조 탱크
65) 조명용 기둥

66) 주방용 자재(싱크 등)
67) 지붕의 기와와 지붕 덮개
68) 지상 스토리지탱크
69) 차고 문과 게이트
70) 차량 및 보행자 영역에 대한 배수 채널

71) 창문과 문
72) 천연 석재 제품
73) 철 파이프와 피팅
74) 철도 바닥짐
75) 캐스트 폴리 우레탄 씰링

76) 커튼 웰
77) 콘크리트 블록 및 맨홀
78) 콘크리트 파이프 및 부품
79) 콘크리트
80) 파이버

81) 건축용 파이프
82) 폐수 처리 시스템
83) 건축용 폴리 (염화 비닐) (PVC-U) 프로파일
84) 건축용 폴리머 섬유
85) 프리 캐스트

86) 플라이 애쉬
87) 플러그 밸브
88) 필러 및 실런트
89) 하수도 어플 리케이션을위한 연성 철 파이프, 피팅, 부속품과 관절
90) 화재 감지 및 화재 경보 시스템

91) Geosynthetic 관련 제품
92) 토목 섬유는 관련 지오텍을과 제품
93) plasterboard 시스템을위한 금속 프레임
94) PVC-UE 프로파일

* 위 품목외의 경우, 메일(anycerti@gmail.com)로 상담 바랍니다.