Carmaker Specification

자동차 부품관련 완성차 제조사 규격, 단체규격 목록입니다.

ASTM : ASTM B368 : Cass Test ; Cass Test
ASTM : ASTM B571 : Qualitative Adhesion Testing Of Metallic Coatings ;
ASTM : ASTM D1149 : Ozone Testing ; Rubber Deterioration – Cracking In An Ozone Controlled Environment
ASTM : ASTM D4060 : martindale/Taber/martindale Abrasion ; Abrasion Resistance Of Organic Coatings By The Taber Abraser
ASTM : ASTM D4169 : cdc/Miscellaneous Non Automotive ; Performance Testing Of Shipping Containers And Systems
ASTM : ASTM D4728 : Vibration At Ambient Temp. ; Random Vibration Testing Of Shipping Containers
ASTM : ASTM D5276 : Chutes/Dropping Tests ; Drop Test Of Loaded Containers By Free Fall
ASTM : ASTM D882 : Mechanical Testing ; Tensile Properties Of Thin Plastic Sheeting
ASTM : ASTM F1929 : Miscellaneous ; Joint De Détection Des Fuites Dans Un Emballage Médical Poreux Par Pénétration De La Teinture.
ASTM : ASTM F1980 : Miscellaneous Climatic ; Accelerated Aging Of Sterile Barrier Systems For Medical Devices
ASTM : ASTM G44 : Miscellaneous Corrosion ; Exposure Of Metals And Alloy By Alternate Immersion In Neutral 3,5% Sodium Chloride Solution
ASTM : ASTM G85 : Salt Spray Testing ; Modified Salt Spray (Fog) Testing
BMW : AA-P 107 : Reflectometer value (gloss) ;
BMW : AA-P 124E : Visual Color Comparison ;
BMW : AA-P 175 : Alternating Corrosion Test ;
BMW : AA-P 177 : Cross Hatch ;
BMW : AA-P 180 : Out-door weathering test ;
BMW : AA-P 192 : Determination of multi-stone chip resistance ;
BMW : AA-P 194 : Chemical resistance test of surfaces ;
BMW : AA-P 224 : Condensation Water Constant atmosphere ;
BMW : AA-P 257 : Resistance of painted parts within the interior against Sun lotion ;
BMW : AA-P 260 : Accelerated weathering crack resistance ;
BMW : AA-P 273 : Resistance of coatings to car-wash machines ;
BMW : AA-P 275 E : Aging Resistance Test ;
BMW : AA-P 276 E : Temperature Cycling Test ;
BMW : AA-P 288 : Accelerated weathering colour stability ;
BMW : AA-P 296 : usure/Abrasion/wear ; Abrasion Resistance Using The Abrex Test Equipment.
BMW : AA-P 296 E : Abrasion Resistance using the ABREX Test equipment ;
BMW : AA-P 308 : Hydrolysis Test ;
BMW : GS 93008-4 : Limit values for constituents and their emissions in materials and components ;
BMW : GS 95003-4 : Climatic requirements ;
BMW : GS 95003-4 : electronic Assemblies In Motor Vehicles/Electric/electronic Assemblies In Motor Vehicles ;
BMW : GS 95003-5 : Chemical requirements ;
BMW : GS 95011-4 : Dewing test ;
BMW : GS 9501-4 : Dewing test ;
BMW : GS 97002 : Trim parts with PUR-Cast skin coating – Test conditions ;
BMW : GS 97014-2 : Emissions measurements in SHED chambers ;
BMW : GS 97014-3 : Emission measurement with air exchange in a testing chamber ;
BMW : GS 97014-3 : Voc Testing ; Emissions Measurement With Air Exchange In A Testing Chamber
BMW : GS 97033 : Decorative and accentuated surfaces in the interior ;
BMW : GS 97034 : Manual abrasion test ;
BMW : GS 97034-8 : Determination of the scratch inclination ;
BMW : GS 97034-9 : Scratch test ;
BMW : GS 97038 : Determination of the burning behavior ;
BMW : GS 97045-2 : Painted plastic parts in exterior and interior – Test certificate ;
BMW : PR 263 : Ts Glazing ;
BMW : PR 303.4 : Climatic tests ;
BMW : PR 306.4 : Solar Radiation Simulation ;
BMW : PR 307.4 : Assessment of the sensitivity of component surfaces to scratching ;
BMW : PR 342 : TP plastics side panel ;
BMW : TP 303.4 : Climatic tests ;
BMW : TP 306.4 : Solar Radiation Simulation ;
BMW : TP 342 : TP plastics side panel ;
BMW : TS 307.4 : Assessment of the sensitivity of component surfaces to scratching ;
DAIMLER : DBL 5307 : Horizontal Flammability ; Flame Retardant Properties
DAIMLER : DBL 5416 : Parts Manufactured From Thermoplastics For Externally Applied Paneling, Housings And Functional Parts ;
DAIMLER : DBL 5555 : Weather-ometer ; Finished Parts And Semi Finished Products Made Of Organics Polymer Material General Conditions And Test Methods
DAIMLER : DBL 7384 : Coating Of Plastic Parts In Vehicle Interiors ;
DAIMLER : DBL 7391 : Miscellaneous Corrosion ; Coatings/paints For Parts With Important Exposure To Corrosion
DAIMLER : DBL 7399 : Cass Test ; Varnishes And Paints
DAIMLER : DBL 9202 : Decorative Parts In Vehicle Interiors ;
DAIMLER : PB VWL 709 : Voc Testing ; Analysis Of The Emission Of Volatile And Condensable Substances From Vehicle Interior Materials By Thermodesorption
DIN : DIN 40050-9 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Ip – Schutzarten
DIN : DIN 50016 : Stress in the humid climate change ;
DIN : DIN 50017 : High Condensation Chamber ; Kondenswasser – Prufklimate
DIN : DIN 50018 : So2 Kesternich Corrosion ; Sulfur Dioxide Corrosion Testing In A Saturated Atmosphere
DIN : DIN 50021 : Cass Test ; Spruhnebelprufungen Mit Verschiedenen Natriumchlorid – Losungen
DIN : DIN 53479 : Chemical Analysis ; Testing Of Plastics And Elastomers- Determination Of Density
DIN : DIN 53497 : Miscellaneous Climatic ; Hot Strorage Test On Mouldings Made Of Thermoplastic Mouldings Made Of Thermoplastic Moulding Materials Without External Mechanical Stressing
DIN : DIN 53504 : Mechanical Testing ; strain Properties Of Rubber/Rubbers – Determination Of Tensible Stress/strain Properties Of Rubber
DIN : DIN 53505 : Hardness ; Rubbers – Shore A And Shore D Hardness Test
DIN : DIN 53754 : martindale/Taber/martindale Abrasion ; Testing Of Plastics – Determination Of Abrasion – Abrasive Disk Method
DIN : DIN 55996-1 : Shot Blasting/Chipping Tests ; Paints And Varnishes – Stone Chip Resistance Test For Coatings – Part 1 : Multi Impact Test
DIN : DIN 75200 : Horizontal Flammability ; Determination Of The Burning Behaviour Of Interior Materials In Motor Vehicles
DIN : DIN 75201 : Fogging ; Determination Of The Windscreen Fogging Characteristics Of Trim Materials In Motor Vehicles
DIN : DIN 75220 : Climatron ; Ageing Of Automotive Components In Solar Simulation Units
DIN : DIN DIN EN ISO 2812-3 : Paints And Varnishes – Determination Of Resistance To Liquids – Part 3 : Method Using An Absorbent Medium ;
DIN : DIN ISO 6270-2 : High Condensation Chamber ; Peintures Et Vernis : Détermination De La Résistance À L’humidité – Partie 2 : Procédure D’exposition Des Échantillons Dans Une Atmosphère D’eau Condensée
Fiat : Fiat 50184 : Requirements for nonmetals environmental tests ;
Fiat : Fiat 50433/01 : Determination of the burning behavior ;
Fiat : Fiat 50449 : Scratch Hardness ;
Fiat : Fiat 50451 : Accelearted weathering test ;
Fiat : Fiat 50452/02 : Determination of hardness and scratching of organic coatings by pencil ;
Fiat : Fiat 50453/01 : Resistance to deformation of organic coatings ;
Fiat : Fiat 50455/08 : Amine contamination resistance ;
Fiat : Fiat 50457 : Determination of brightness ;
Fiat : Fiat 50461 : Coating adhesion test ;
Fiat : Fiat 50470 : Determination of the resistance to water ;
Fiat : Fiat 50471/01 : Test of resistance to the ultraviolet light alternated to humidity ;
Fiat : Fiat 50473 : Determination of the resistance to gasoline ;
Fiat : Fiat 50473/01 : Determination of the resistance to chemical aggressions ;
Fiat : Fiat 50482 : Determination of conductivity ;
Fiat : Fiat 50488/01 : Resistance to the stone strokes ;
Fiat : Fiat 9.03141 : Instrument panels ;
Fiat : Fiat 9.55367 : Adhesive tapes ;
Fiat : Fiat 9.55812/01 : Aesthetic and operational finishing of parts made of plastic materials obtained by moulding ;
Fiat : Fiat 9.55842/01 : Aesthetic and operational finishing of parts made of plastic materials obtained by painting ;
Fiat – LANCIA : 50180 : Salt Spray Testing ; Corrosion
Fiat – LANCIA : 50184 : Small Volume Climatic Chamber (
Fiat – LANCIA : 50417 : Resistance To Ageing In Ozone-rich Atmospheres ;
Fiat – LANCIA : 50444 : Genuine Leather, Imitation Leather And Vinyl Sheeting- Color Fastness And Aging Test. ;
Fiat – LANCIA : 50451 : Cdmc (closed Carbon Arc) ; Vieillissement Accelere Aux Agents Atmospheriques
Fiat – LANCIA : 50451-01 : Cdmc (closed Carbon Arc) ; Accelerated Ageing In Sunlight
Fiat – LANCIA : 5045202 : Scratching,marking ; scratching Test For Organic Coating
Fiat – LANCIA : 50457 : brillance/Colorimetry/gloss ; Specular Gloss Determination
Fiat – LANCIA : 50461 : Adhesion ; Adhesion Test Of Inorganic And Organic Trims By Squaring Off
Fiat – LANCIA : 50470 : High Condensation Chamber ; Paints – Determination Of The Resistance To Water
Fiat – LANCIA : 50471/01 : Uvcon ; Resistance To Uv And Humidity (quv)
Fiat – LANCIA : 50473 : Staining ; Determination Of Resistance To The Essence Of Paintings
Fiat – LANCIA : 50473/01 : Staining ; Determination Of The Resistance To Chemical Agents Of Products
Fiat – LANCIA : 5048801 : Shot Blasting/Chipping Tests ; Projection Resistance At The Stone
Fiat – LANCIA : 5049304 : Automatic Cycling Corrosion ; Organic Coatings Determination Of The Resistance To Scab- Indoor Corrosion
Fiat – LANCIA : 7G2000 : Horizontal Flammability ; Determining The Resistance To Combustion Of The Non -metallic Materials For Parts Inside Vehicle Passenger Compartment
Fiat – LANCIA : 7M9001 : Surface Treatement Adhesion Check ;
FMVSS : 302 : Horizontal Flammability ; Flammability Of Interior Materials
FMVSS : FMVSS 108 : Transportation ;
Ford : FLTM 154-01 : Abrasion resistance ;
Ford : FLTM BI 104-01 : Water immersion test ;
Ford : FLTM BI 106-01 : Paint adhesion test ;
Ford : FLTM BI 107-01 : Chip resistance test ;
Ford : FLTM BI 107-05 : Thermal shock test ;
Ford : FLTM BI 113-01 : Water and soap spotting ;
Ford : FLTM BI 113-02 : Resistance to acid spotting ;
Ford : FLTM BI 113-06 : Resistance to perspiration ;
Ford : FLTM BI 113-08 : Resistance to suncream lotion and insect repellant ;
Ford : FLTM BI 157-04 : Stone chip resistance test ;
Ford : FLTM BN 103-01 : Resistance to migration staining ;
Ford : FLTM BN 106-01 : Determination of weight per unit area ;
Ford : FLTM BN 107-01 : Crocking test ;
Ford : FLTM BN 108-02 : Resistance to abrasion – Taber abraser ;
Ford : FLTM BN 108-13 : Resistance to scratching ;
Ford : FLTM BN 112-08 : 180° peel adhesion ;
Ford : FLTM BN 112-08 : Soiling and cleanability ;
Ford : FLTM BO 115-01 : Resistance to artificial weathering ;
Ford : FLTM BO 131-01 : Determination of odor of interior trims ;
Ford : FLTM BO 151-01 : Reistance to low temperature impact ;
Ford : FLTM BO 155-01 : Resistance to protective waxes ;
Ford : FLTM BO 160-04 : Resistance to high pressure cleaning ;
Ford : FLTM BP 153-01 : Staining of surfaces ;
Ford : FLTM BQ 104-07 : Environmental test cycles ;
Ford : FLTM BU 112-02 : Peel adhesion ;
Ford : WSK-M98P5-A : Finished parts, plastics, interior ;
Ford : WSK-M98P6-A : Finished parts, plastics, exterior ;
Ford : WSS-M15P4-E : Interior trim, assembly performance specification ;
Ford : WSS-M15P4-F : Hard mold-in-color interior components ;
Ford : WSS-M2P188-A1 : Paint performance, interior ;
Ford : WSS-M8P16-A : Performance carpet, floor and trim ;
Ford : AN 101-01 : Staining ; Resistance Des Textiles Aux Taches De Sang, De Transpiration Et D’eau/Resistance Of Textiles To Bleeding – Perspiration And Water Spotting
Ford : BI 10401 : High Condensation Chamber ; Water Immersion Test
Ford : BI 106-01 : Cross-cut Tests ; Paint Adherence Test
Ford : BI 107-05 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Thermal Shock Test For Paint Adhesion
Ford : BI 11001 : brillance/Colorimetry/gloss ; Measurement Of The Gloss
Ford : BI 12301 : Miscellaneous Corrosion ; Painted Sheet Metal Corrosion Test
Ford : BI 15706 : Shot Blasting/Chipping Tests ; High Performance Stone Chip Resistance Test New Rating Scale
Ford : BI 16101 : Mar Resistance Determination For Automotive Coatings ;
Ford : BN 10301 : Staining ; Resistance Of Coated Fabrics And Plastic Film To Migration Staining And Blocking
Ford : BN 107-01 : Rubbing ; Crocking Test
Ford : BN 10802 : martindale/Taber/martindale Abrasion ; Resistance To Abrasion-taber Abraser
Ford : BN 10804 : martindale/Taber/martindale Abrasion ; Resistance To Scuffing
Ford : BN 10813 : Cross-cut Tests ; Resistance To Scratching
Ford : BO 10105 : Fluids ; Determination Of Fuel Resistance Of Plastic Parts
Ford : BO 11601 : Exposition De Matériaux De Garnisssage Intérieur Dans Un Appareil À Arc Xenon Refroidi À L’eau Et À Éclairement Énergétique Controlé ;
Ford : BO 11603 : Fogging ; Fogging
Ford : BO 13101 : Smell Tests/odour ; Odor
Ford : BO 131-03 : Smell Tests/odour ; New Odor Test
Ford : BO 15101 : Chutes/Dropping Tests ; Resistance To Low-temperature Impact
Ford : BO 16004 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; High Pressure Cleaning
Ford : BP 10101 : Ozone Testing ; Rubber-degradation By Ozone
Ford : BQ 10407 : Small Volume Climatic Chamber (
Ford : MA 0135 : Staining ; Insect Repellent Resistance
Ford : MA 0136 : Suntan Lotion Resistance ;
Ford : WSKM98P6A : Finished Parts, Plastics Exterior ;
Ford : WSSM15P4E : Miscellaneous Climatic ; Interior Trim, Assembly Performance Specification
Ford : WSS-M1P83C1 : abs Or Filled Nylon- Interior/Electroplating, Bright Or Low Gloss Decorative Finish Over Abs, Pc/abs Or Filled Nylon- Interior ;
Ford : WSSM2P180B : Paint Performance, Rigid Substrates, Exterior ;
Ford : WSSM2P188 : Paint Performance, Plastic Substates, Interior. ;
Ford : WSS-M99P41-A10-A63 : Label Performance ;
GM + Opel : GMI 00002 : General requirements for coloured plastic components for exterior use ;
GM + Opel : GMI 00004 : General requirements for coloured plastic components for interior use ;
GM + Opel : GMW 14093 : Determination of impact resistance ;
GM + Opel : GMW 14095 : Steering wheel assembly – Requirements ;
GM + Opel : GMW 14162 : Colorfastness to artificial weathering ;
GM + Opel : GMW 14296 : Perspiration resistance ;
GM + Opel : GMW 14444 : Material Related Interior Part Performance ;
GM + Opel : GMW 14445 : Sunscreen and insect repellant resistance ;
GM + Opel : GMW 14650 : Performance Requirements for Exterior Plastic Parts ;
GM + Opel : GMW 14651 : Material Related Interior Plastic Part Performance ;
GM + Opel : GMW 14688 : Scratch and Mar resistance ;
GM + Opel : GMW 14698 : Scratch Resistance of Organic Coatings and Self-Adhesive Foils ;
GM + Opel : GMW 14729 : Procedures for High Humidity Test ;
GM + Opel : GMW 14829 : Tape Adhesion Test for Paint Finishes ;
GM + Opel : GMW 14867 : Performance Requirements of Paints on Interior Plastic Substrates ;
GM + Opel : GMW 3182 : Determination of mass per area ;
GM + Opel : GMW 3205 : Resistance to odor propagation ;
GM + Opel : GMW 3232 : Flammability test ;
GM + Opel : GMW 3235 : Fogging characteristics ;
GM + Opel : GMW 3402 : Soil and cleaner resistance ;
GM + Opel : GMW 8081 : Static Headspace GC-MS for Interior Materials ;
GM + Opel : GM 4476P : Cass Test ; Copper-accelerated Acetic Acid Salt Spray Test
GM + Opel : GM 4486P : Test For Ozone Resistance Of Elastomer Compounds ;
GM + Opel : GM 9900P : Fluids ; Cleaning solvent Resistance Of Automotive Components During Normal Customer Use
GM + Opel : GME 00002 : General requirements for coloured plastic components for exterior use ;
GM + Opel : GME 00002 : General Requirements For Coloured Plastic Components For Exterior Use ;
GM + Opel : GME 00004 : General requirements for coloured plastic components for interior use ;
GM + Opel : GME 00004 : General Requirements For Integrally Coloured Plastic Components For Interior Use ;
GM + Opel : GME 00010 : Weather-ometer ; Performance For Automotive Plastic Parts/Performance For Automotive Plastic Parts
GM + Opel : GME 00211 : Performance requirements for applied paint finish on plastic parts and components for interior use ;
GM + Opel : GME 00211 : Performance Requirements For Applied Special Effect Paint Finish On Metallic Or Plastic Parts And Components For Interior Use ;
GM + Opel : GME 60202 : Resistance to high humidity environments ;
GM + Opel : GME 60202 : High Condensation Chamber ; Determination Of The Resistance Of Automotive Components To High Humidity Environments
GM + Opel : GME 60268 : Shot Blasting/Chipping Tests ; Resistance To Stone Impact
GM + Opel : GME 60271 : Formaldehyde ; Determination Of The Release Of Formaldehyde From Moulded Parts For The Vehicle Interior
GM + Opel : GME 60276 : Smell Tests/odour ; Odor Resistance
GM + Opel : GME 60326 : Fogging ; Fogging
GM + Opel : GME 60400 : usure/Abrasion/wear ; Resistance To Abrasion Of Organic Coatings
GM + Opel : GME 60401 : Cross-cut Tests ; Adhesion Of Organic Coatings
GM + Opel : GME 60402 : Adhesion ; Scratch Resistance Of Organic Coatings
GM + Opel : GMI 00002 : Weather-ometer ; General Requirements For Coloured Plastics Components For Exterior Use
GM + Opel : GmI 60206 : Salt Spray Testing ; Determination Of Resistance To Corrosion Of Automotive Components By Salt Spray Fog Testing
GM + Opel : GMW 14093 : Determination Of Impact Resistance Of Plastic Components ;
GM + Opel : GMW 14162 : Colorfastness To Artificial Weathering ;
GM + Opel : GMW 14334 : Chemical Resistance To Fluids ;
GM + Opel : GMW 14650 : Performance Requirements For Exterior Plastic Parts ;
GM + Opel : GMW 14688 : marquage/Scratching/marking ; Scratch And Mar Resistance
GM + Opel : GMW 14700 : Stone Impact Resistance Of Coatings ;
GM + Opel : GMW 14701 : Resistance Of Coatings To Chemical Etching And Distortion ;
GM + Opel : GMW 14872 : Miscellaneous Corrosion ; Cyclic Corrosion Laboratory Test
GM + Opel : GMW 3172 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; électronique – Environnement/Durabilité./General Specification For Electrical/electronic Components – Environmental/Durability.
GM + Opel : GMW 3205 : Smell Tests/odour ; Determining The Resistance To Odor Propagation Of Interior Materials
GM + Opel : GMW 3232 : Horizontal Flammability ; Determining The Flammability Of Interior Trim Materials
GM + Opel : GMW 3235 : Fogging ; Fogging Characteristics Of Trim Materials
GM + Opel : GMW 3431 : Fluids ; Testing Switches
GM + Opel : GMW 8081 : Voc Testing ; Static Headspace Gc-ms For Interior Materials
HONDA : 0094ZSNA0000 : Voc Testing ; Test Method For Voc
HONDA : 0096ZSECA000 : Smell Tests/odour ; Paint For Interior Parts/Peinture Pour Pièces Intérieures
HONDA : 8460ZSEA0000 : Assy Trunk Interior Parts ;
HONDA : HESD6003 : Horizontal Flammability ; Flammability Test Method For Automobile Interior Materials
HONDA : HESD6506 : General Test Methods For Fabrics ;
HONDA : HESD6507 : Smell Tests/odour ; General Test Methods For Floor Carpet
HONDA : HESD6508 : Fogging ; Test Method For Fogging Of Interior Materials For Automobiles
HONDA : HESD6601 : Ci 3000 ; Light Resistance With Xenon-arc Lamp
IVECO : 160170 : Accelerated Ageing To Light – Method For Internal Cab Components ;
JIS : JIS D 0205 : Cxw (open Carbon Arc) ; Weatherability For Automotive Parts
JIS : JIS JAS OD001 : General Rules Of Environmental Testing Methods For Automotive Eletronic Equipment ;
JIS : JIS Z 2371 : Salt Spray Testing ; Methods Of Neutral Salt Spray Testing
Kia, Hyundai : MS 200-33 : Temperature and humidity resistance ;
Kia, Hyundai : MS 200-38 : Steering wheel material performance ;
Kia, Hyundai : MS 210-05 : Molded plastic parts – interior use ;
Kia, Hyundai : MS 225-23 : Heat resistance ;
Kia, Hyundai : MS 300-07 : Soilability of interior skins ;
Kia, Hyundai : MS 300-08 : Flammability resistance ;
Kia, Hyundai : MS 300-34 : Test method of odor ;
Kia, Hyundai : MS 300-54 : Fogging ;
Kia, Hyundai : MS 300-55 : Test method for organic volatile compounds ;
Kia, Hyundai : MS 600-35 : Testing methods for coatings and coating films ;
Kia, Hyundai : MS 652-12 : Soft feeel painting – interior parts ;
Kia, Hyundai : MS 652-14 : Painting – Hard thermoplastic parts ;
Kia, Hyundai : ES 5690008 : Driver Airbag Module Performance ;
Kia, Hyundai : MS 200-38 : Steering Wheel Material Performance ;
Kia, Hyundai : MS 65214 : Painting – Thermoplastic Parts ;
MAZDA : MESPA51310 A : Room Lamp ;
Mercedes : DBL 5306 : Fogging ;
Mercedes : DBL 5306 : Tests procedures for interior decor materials and similar products ;
Mercedes : DBL 5307 : Flame resistance ;
Mercedes : DBL 5404 : Parts manufactured from thermoplastics for the direct and indirect areas of the passenger compartment ;
Mercedes : DBL 5555 : Finished parts and semi-finished products made from organic polymers materials ;
Mercedes : DBL 5562 : Thermoplastic Elastomers (TPE) ;
Mercedes : DBL 7904 : Bonded joints on components ;
Mercedes : DBL 8585 : Emission analysis ;
MIL-Spec. : MIL-STD-810 : Environmental Engineering Considerations And Laboratory Tests ;
MITSUBISHI : ESX 71222 : Painting Hard Thermoplastic Parts ;
MITSUBISHI : ESX 83220 : Color Fastness ;
NF-ISO-EN-CEI : A 05-109 : Salt Spray Testing ; Corrosion Of Metals And Alloys – Neutral Salt Spray Test – Electroplated Or Non-electroplated Zinc And Alloyed Zinc Coatings With Or Without Conversion
NF-ISO-EN-CEI : A 91-411 : Automatic Cycling Corrosion ; From The Surface Treatment Anodizing Métaux- (Anodic oxidation) From Aluminum and Its Alloys – Of Resistance To Corrosion Control
NF-ISO-EN-CEI : C 20-701 : On testing environment- Test Method – Test A: Cold (CEI 68-2-1) ;
NF-ISO-EN-CEI : C 20-702 : Environment Tests- Test Method – Test B: Dry Heat (cei 68-2-2) ;
NF-ISO-EN-CEI : CEI 60721-3-3 : Classification Of Groups Of Environmental Parameters And Their Severities – Stationary Use At Weatherprotected Locations ;
NF-ISO-EN-CEI : CEI 68252 : alternee En Manuel/3c Corrosion/manual Alternate ; Basic Environmental Testing Procedures : Salt Mist
NF-ISO-EN-CEI : CEI 68260 : Four-gas Corrosion ; Environmental Testing – Test Ke : Flowing Mixed Gas Corrosion Test
NF-ISO-EN-CEI : DIN EN ISO 3146 : Chemical Analysis ; Plastics – Determination Of The Melting Behaviour ( Melting Temperature Or Melting Range) Of Semi-crystalline Polymers
NF-ISO-EN-CEI : EN 3665 : Miscellaneous Corrosion ; Of Resistance To test Corrosion Of Aluminum Alloys Filiforme
NF-ISO-EN-CEI : EN 60529 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Degrees Of Protection Provided By Enclosures (ip Code)
NF-ISO-EN-CEI : EN ISO 105-B02/A1 : Colour Fastness To Artificial Light: Xenon Arc Fading Lamp Test ;
NF-ISO-EN-CEI : EN ISO 105-X12 : Rubbing ; Textiles- Tests For Colour Fastness- Part X12 : Colour Fastness To Rubbing
NF-ISO-EN-CEI : EN ISO 1463 : Microscopy ; Measurement Of The Coating Thickness
NF-ISO-EN-CEI : EN ISO 306 : Miscellaneous (subcontracting) ; Plastics – Thermoplastic Materials – Determination Of Vicat Softening Temperature (vst)
NF-ISO-EN-CEI : F 19-201 : Miscellaneous ; Rolling Stock Ferroviaire- PAINTING Products General Prescriptions – Methods And Controls On tests
NF-ISO-EN-CEI : ISO 1133 : Mfi ; Plastics – Determination Of The Melt Mass-flow And The Melt Volume-flow Rate Of Thermoplastics
NF-ISO-EN-CEI : ISO 11341 : Weather-ometer ; Paints And Varnishes- Artificial Weathering And Exposure To Artificial Radiation- Exposure To Filtered Xenon-arc Radiation.
NF-ISO-EN-CEI : ISO 11357-3 : dsc/Irtf/dsc ; Plastics — Differential Scanning Calorimetry (dsc) — Part3: Determination Of Temperature And Enthalpy Of Melting And Crystallization
NF-ISO-EN-CEI : ISO 1172 : Ash Rate ; Determination Of Rate Of Glass Mineral Textile And Load – Methods For Calcining
NF-ISO-EN-CEI : ISO 1431-1 : Ozone Testing ;
NF-ISO-EN-CEI : ISO 16750-3 : Road Vehicles – Environmental Conditions And Testing For Electrical And Electronic Equipment – Part 3 Mechanical Loads ;
NF-ISO-EN-CEI : ISO 16750-4 : Road Vehicles-environmental Conditions And Testing For Electronical And Electronic Equipement-part 4 Climatic Loads ;
NF-ISO-EN-CEI : ISO 16750-5 : Fluids ; Véhicules Routiers-spécifications D’environnement Et D’essai Des Équipements Électriques Et Éléctroniques – Partie 5 : Charges Chimiques
NF-ISO-EN-CEI : ISO 188 : Rubber Vulcanized Or Thermoplastic – Accelerated Ageing And Heat Resistance Tests ;
NF-ISO-EN-CEI : ISO 20653 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Road Vehicles – Degrees Of Protection (ip-code) – Protection Of Electrical Equipment Against Foreign Objects, Water And Access
NF-ISO-EN-CEI : ISO 37 : Mechanical Testing ; Rubber Vulcanized Or Thermoplastic – Determination Of Tensile Stress-strain Properties
NF-ISO-EN-CEI : ISO 4532 : Chutes/Dropping Tests ; Determination Of The Resistance To Impact Of Enamelled Parts (replaces The Din 51155)
NF-ISO-EN-CEI : ISO 4892-2 : Weather-ometer ; Plastics – Method Of Exposure To Laboratory Light Sources – Part 2 : Xenon Arc Lamps
NF-ISO-EN-CEI : ISO 4892-3 : Uvcon ; Plastics – Methods Of Exposure To Laboratory Light Sources – Part 3 : Fluorescente Uv Lamps.
NF-ISO-EN-CEI : ISO 6270-2 : High Condensation Chamber ; Paints And Varnishes – Determination Of Resistance To Humidity – Part 2: Procedure For Exposing Samples In Condensation Water Atmospheres
NF-ISO-EN-CEI : ISO 6272-1 : Chutes/Dropping Tests ; Paints And Varnishes- Rapid-deformation (impact Resistance) Tests – Part 1: Falling-weight Test, Large-area Indenter
NF-ISO-EN-CEI : ISO 6988 : So2 Kesternich Corrosion ; Metal Coatings And Other Non-organic coatings: Trial On Sulphur Dioxide With General De Moisture Condensation
NF-ISO-EN-CEI : ISO 75-2 : Miscellaneous (subcontracting) ; Plastics- Determination Of Temperature Of Deflection Under Load- Part 2 : Plastics And Ebonite
NF-ISO-EN-CEI : ISO 868 : Hardness ; Plastic And Ebonite – Determination Of Indentation Hardness By Means Of A Durometer (shore Hardness)
NF-ISO-EN-CEI : ISO 9142 : Miscellaneous Climatic ; Adhesives – Guide For The Selection Of Ageing Test Normal Conditions Of Stuck Assemblies In Laboratory
NF-ISO-EN-CEI : NF EN 60068-2-11 : Salt Spray Testing ; Environmental Testing – Part 2 : Tests – Test Ka : Salt Mist.
NF-ISO-EN-CEI : NF EN 868-5 : Mechanical Testing ; Sealable Pouches And Reels Of Porous Materials And Plastic Film Construction — Requirements And Test Methods
NF-ISO-EN-CEI : NF EN ISO 1183-1 : Chemical Analysis ; Methods For Determining The Density Of Non-cellular Plastics
NF-ISO-EN-CEI : NF EN ISO 178 : Mechanical Testing ; Plastics – Determination Of Flexural Properties.
NF-ISO-EN-CEI : NF EN ISO 179-1 : Pendulum Impact ; Plastics – Determination Of Charpy Impact Strength – Part 1: Non-instrumented Impact Test.
NF-ISO-EN-CEI : NF EN ISO 20567-1 : Shot Blasting/Chipping Tests ; Paints And Varnishes – Determination Of Stone-chip Resistance Of Coatings – Part 1 : Multi Impact Testing.
NF-ISO-EN-CEI : NF EN ISO 2409 : Cross-cut Tests ; Paints And Varnishes – Cross-cut Test
NF-ISO-EN-CEI : NF EN ISO 306 : Miscellaneous (subcontracting) ; Plastics – Thermoplastic Materials – Determination Of Vicat Softening Temperature (vst)
NF-ISO-EN-CEI : NF EN ISO 527-1 : Mechanical Testing ; Plastics – Determination Of Tensile Properties – Part 1 : General Principles.
NF-ISO-EN-CEI : NF EN ISO 527-2 : Mechanical Testing ; Plastics – Determination Of Tensile Properties – Part 2 : Test Conditions For Moulding And Extrusion Plastics.
NF-ISO-EN-CEI : NF EN ISO 6603-2 : Tour De Chute/Multiaxial Impact Test/drop Tower ; Plastics – Determination Of Puncture Impact Behaviour Of Rigid Plastics – Part 2: Instrumented Impact Testing
NF-ISO-EN-CEI : NF EN ISO 9227 : Salt Spray Testing ; Corrosion Tests In Artificial Atmospheres – Salt Spray Tests.
NF-ISO-EN-CEI : NF ISO 3795 : Horizontal Flammability ; Roads Vehicles And Tractors And Machinery For Agriculture And Forestry- Determination Of Burning Behaviour Of Interior Materials.
NF-ISO-EN-CEI : NF T 30-049 : Climatron ; Paints And Varnishes- Cladding Paints- Accelerated Ageing Test
NF-ISO-EN-CEI : NF T 30-123 : Microscopy ; Paints – Determination Of The Thickness Of The Dry Film – Microscope Methods
NF-ISO-EN-CEI : T 51-024-1 : Ball Indentation Method ;
NF-ISO-EN-CEI : T 51-113 : marquage/Scratching/marking ; Plastics – Determination Of Resistance To Scratch
NF-ISO-EN-CEI : T 57-102 : Ash Rate ;
NF-ISO-EN-CEI : T 76-123 : Mechanical Testing ; metal/Adhesives – Determination Of Tensile Strength Of Butt Joints
Nissan : M0007 : Testing method for automotive paint ;
Nissan : M0094 : Flammability ;
Nissan : M0131 : Methods of High Temperature Test ;
Nissan : M0132 : Methods of Thermal Cycle Testing for Plastic Parts ;
Nissan : M0133 : Chemical resistance ;
Nissan : M0134 : Falling Ball Impact Test ;
Nissan : M0135 : Weatherability and Light Resistance Test ;
Nissan : M0136 : Abrasion resistance test ;
Nissan : M0141 : Methods of Test for Coating of Synthetic Resin ;
Nissan : M0153 : Testing Methods of Moisture Resistance for Plastic Parts ;
Nissan : M0159 : Testing Method of the Scratch Resistance ;
Nissan : M0160 : Method of Testing the Smell of Interior Parts ;
Nissan : M0161 : Method of Fogging Test for Interior Materials ;
Nissan : M0403 : VOC of Cabin Parts ;
Nissan : M0463 : Decorative Chromium Plating ;
Nissan : M0501 : Testing Methods of Staining for Vulcanized Rubber ;
Nissan : M5067 : Paint guard coat ;
Nissan : M5081 : Paint Film Quality of Plastic Parts and chrome plated parts ;
Nissan : 24014NDS01 : Specification Of Direct-plug- In Connector 91 Type ;
Nissan : 25100NDS00 : Fundamental Performance Of Common To Switches ;
Nissan : 26010NDS00 : Infrared Sunshine Exposure ; Front Lamp
Nissan : 26590NDS00 : Lamp Assy-stop ;
Nissan : 28401NDS01 : Basic Physiochemical Environmental Specification Of Electronic Parts ;
Nissan : 40300NDS01 : Miscellaneous Corrosion ; Corrosion Prevention Specification Of Disc Wheel
Nissan : M0007 : Small Volume Climatic Chamber (
Nissan : M0076 : cdc/Miscellaneous Automotive ;
Nissan : M0094 : Horizontal Flammability ; Flammability Of Interior Materials For Automobiles
Nissan : M0131 : Infrared Sunshine Exposure ; High Temperature
Nissan : M0132 : Small Volume Climatic Chamber (
Nissan : M0133 : Fluids ; Chemical Resistance For Synthetic Resin Parts
Nissan : M0134 : Chutes Dropping Tests ; Falling Ball Impact, Chute D’impact
Nissan : M0136 : Rubbing ; Resistance To Abrasion
Nissan : M0140 : Salt Spray Testing ; Salt Spray
Nissan : M0141 : Methods Of Test For Coating Of Synthetic Resin ; Synthetic Resin
Nissan : m0158 : Automatic Cycling Corrosion ; Methods Of Compound Corrosion Test
Nissan : M0159 : Scratch Resistance Of Interior Polypropylene Resin Parts ;
Nissan : M0160 : Smell Tests/odour ; Method Of Testing The Smell Of Interior Parts.
Nissan : M0161 : Fogging ;
Nissan : M8022 : Pvc Slush – Molded Instrument Panel Pad Skin ;
PSA : 9634115099 : connectivity ;
PSA : B15 4140 : Chrome Electroplating On Plastics ;
PSA : B15 5050 : Paint Coatings ;
PSA : B15 5220 : Coatings Of Painting Brackets On Metal Machanical Elements ;
PSA : B21 5540 : cdc/Miscellaneous Automotive ; Stn – Gmp – Circuit Fuel Intervolumes – Piping (fuel-diesel)
PSA : B21 7090 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Electrical And Electronic Apparatus
PSA : B21 7120 : Environment Requirements Of Electrical And Electronic Equipments – Mechanical Characteristics ;
PSA : B21 7130 : Climatic And Chemical Characteristics ;
PSA : B22 2810 : Quick Connections For Fuel Lines ;
PSA : B22 2820 : « Plastic » Injection Rail For Gasoline Motor ;
PSA : B22 6142 : Cycled Pressure Testing ; Stn Cooling Circuit – Tubes And Pipes Rubber
PSA : B22 7130 : Stn – Air Line – Air Supply ;
PSA : B25 1140 : Wiring Harnesses – Harness Validation ;
PSA : B25 7110 : Secondaire & Feu Avant/Stn – Front – Signs And Lighting – Projector Main/Secondary & Fire Front ;
PSA : B25 7205 : Air Thermal Shocks ; Stn Rear Face, Face Lateral – Lighting and Signage
PSA : B27 3620 : Cycled Pressure Testing ; Air Conditioning System – Unit Heater
PSA : B28 4190 : Fuel storage and vapors – Hatches Filling Plastics ;
PSA : B29 8510 : Small Volume Climatic Chamber (
PSA : B30 4410 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Watertightness
PSA : B62 0030 : Thermoplastic, Thermosetting Materials, Thermoplastic Elastomers And Rubbers- Specifications ;
PSA : B62 0300 : cdc/Miscellaneous Automotive ; Thermoplastic And Thermosetting Materials Classification
PSA : D10 1145 : Ash Rate ; Ash Content
PSA : D10 5495 : Voc Testing ; Materials In Vehicle Passenger Compartment – Assessment Of The Quantity Of Volatile Organic Compounds (voc) By Thermodesorption/gc/ms (fid)
PSA : D10 5496 : Volatility ; Materials In Vehicle Passenger Compartment Search For Basic Amine Type Volatiles In Polyurethane Materials
PSA : D10 5517 : Smell Tests/odour ; Parts In Passenger Compartment And Boot – Assessment Of Odour Strength – Assessment Against Damning Descriptive Terms
PSA : D11 1157 : Mechanical Testing ; Flat Peeling
PSA : D12 4100 : Special Mechanical Tests ; Equipments Or Functions Glued – Resistance To Dynamic Pullout
PSA : D12 4410 : Mechanical Testing ; Side Protections Glued On The Exterior Of The Body – Resistance To Pullout On The Edge
PSA : D13 5486 : Tcac Corrosion ; From Corrosion Testing Cyclic Alternating (tcac)
PSA : D14 1055 : usure/Abrasion/wear ; Organic Materials And Coatings – Wear By Rubbing
PSA : D14 1425 : usure/Abrasion/wear ; Decorative Coatings And Parts – Subject To Friction – Resistance To Rotary Abrasion
PSA : D14 1428 : Shot Blasting/Chipping Tests ; Anti-chip Products – Plastics – Rubbers – Resistance To Shot Blasting
PSA : D15 1343 : brillance/Colorimetry/gloss ; Coloured Materials – Visual Comparison Of The Aspects In A Light Chamber
PSA : D15 5319 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; High-pressure Washing
PSA : D15 5504 : brillance/Colorimetry/gloss ; Painting From coverings – A Visual Comparison To Colors In Cabin Light
PSA : D17 1058 : Salt Spray Testing ; Materials And Coatings Salt Spray Test Of 5% Nacl And Methods Of Grading
PSA : D23 1001 : Cass Test ; Coatings – Metallic – Cupro-acetic Salt Spray Test (cass-test)
PSA : D24 1312 : Shot Blasting/Chipping Tests ; Graveling
PSA : D24 5010 : usure/Abrasion/wear ; Paint Coatings – Resistance To Dry Abrasion – Crockmeter Method
PSA : D24 5020 : usure/Abrasion/wear ; Coatings For Plastic Parts Interior Decorated – Abrasion Resistance – Abrex Method
PSA : D24 5359 : Car-wash Test ; Paint Coatings – Resistance To The Action Of Mechanical Wash Brushes
PSA : D25 1057 : Miscellaneous (subcontracting) ; Thickness Of Metal Coating By Micrography
PSA : D25 1075 : Cross-cut Tests ; Paint Coatings – Cross Hatch Test.
PSA : D25 1298 : Persoz Hardness ; Persoz Hardness
PSA : D25 1342 : Miscellaneous (subcontracting) ; Ericksen Stamping
PSA : D25 1413 : brillance/Colorimetry/gloss ; Paint Coatings – Rubbers And Plastics – Measurement Of Gloss
PSA : D25 5376 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Paints, High Pressure Washing
PSA : D25 5540 : Paints Coatings, Measurement Of Orange Peel And Sharpness Of Image Appearance Measurement Wave Scan Dual ;
PSA : D26 5316 : Organic Coating On Magnetic Or Nonmagnetic Metallic Base- Non-destructive Coating Measurement ;
PSA : D27 1327 : High Condensation Chamber ; Resistance To Water Immersion (ford Tank)
PSA : D27 1389 : Weather-ometer ; Paint Coatings – Rubbers And Plastics – Artificial Ageing By Weather – Ometer
PSA : D27 1433 : Staining ; Resistance To Dilute Sulfuric Acid
PSA : D27 1571 : High Condensation Chamber ; Blistering Due To Humidity
PSA : D27 5144 : Staining ; Staining
PSA : D27 5278 : Staining ; Staining By Water In Rubber
PSA : D27 5377 : Staining ; Paint Coatings – Staining By Chemical Products.
PSA : D27 5415 : Biological Attacks ; Painting From coverings – Resistance To Biological Attacks.
PSA : D27 5437 : Staining ; Tempera By The Solvents
PSA : D27 5438 : Small Volume Climatic Chamber (
PSA : D27 5439 : Uvcon ; Paint Coatings – Artificial Ageing To Ultraviolet Light
PSA : D40 5535 : Formaldehyde ; Analysis Of Formaldehyde And Other Carbonyl Compounds In The Materials Of Vehicle Passenger Compartment By Liquid Chromatography
PSA : D41 1029 : Mechanical Testing ; Tensile Strength On Fabrics And Coated Fabrics
PSA : D41 1097 : Floor Coverings And Trim Coverings – Resistance To Punching ;
PSA : D41 1099 : Mechanical Testing ; Vulcanized Rubbers And Thermoplastic Rubbers – Traction
PSA : D41 1108 : Mechanical Testing ; Adhesives – Tensile Shear Strength (shim Method)
PSA : D41 1126 : Mechanical Testing ; Textiles – Plastic Coated Textiles Plastic Sheets – Carpets – Tearing (tensile Test Machine)
PSA : D41 1286 : Special Mechanical Tests ; Sheet Materials – Resistance To Tearing (diabolo Method)
PSA : D41 1541 : Mechanical Testing ; Compressive strength
PSA : D41 5149 : Mechanical Testing ; Rubbers Resistance To Tearing (delft Test Speciment)
PSA : D41 5225 : Mechanical Testing ; Resistance In Traction – Shear (putty – Polyurethane)
PSA : D42 1007 : usure/Abrasion/wear ; Plastic Coated Textiles – Leathers – Creasing
PSA : D42 1008 : Miscellaneous (subcontracting) ;
PSA : D42 1235 : Chutes/Dropping Tests ; Rubber And Plastic Parts – Behaviour To Impact (falling Weight Method)
PSA : D42 1775 : marquage/Scratching/marking ; Inside And Outside Plastic Parts Resistance To Scratching By Abrasion
PSA : D44 1073 : Creeling Materials Wear-out Due To Friction ;
PSA : D44 1221 : marquage/Scratching/marking ; Materials With Brushed Velour Surface Resistance To Scuffing
PSA : D44 1900 : marquage/Scratching/marking ; Textiles Tendency To Pilling And Linting By Friction
PSA : D44 1959 : usure/Abrasion/wear ; Plastic And Rubber Materials – Resistance To Mechanical Friction.
PSA : D45 1010 : Rubbing ; Materials And Parts In Polymer Passenger Compartment Inner And Outer Colour Fastness To Rubbing
PSA : D45 1036 : Staining ; Effect Of Plasticizers On Paint Hardness
PSA : D45 1132 : Compact Rubbers – Compression Set At Constant Deformation ;
PSA : D45 1139 : Small Volume Climatic Chamber (
PSA : D45 1234 : Small Volume Climatic Chamber (
PSA : D45 1333 : Horizontal Flammability ; Horizontal Flammability (materials Inside Passenger Compartment)
PSA : D45 1528 : Miscellaneous (subcontracting) ; Rigidity At Low Temperatures
PSA : D45 1601 : Volatility ; Materials In Passenger Compartment – Volatility Of Additives On A Single Surface
PSA : D45 1727 : Fogging ; Trim Materials For Interior And Passenger Compartment Parts – Fogging – Condensation
PSA : D45 5015 : Special Mechanical Tests ; In parts Absorbent Cotton agglomerated – Sinking At Hallmark Semi Cylindrical
PSA : D45 5210 : Electrical Measures ; Plastic Materials – Measurement Of Electrostatic Charges Dissipation Measurement Of Electrostatic Charges Dissipation
PSA : D45 5232 : Halogen Sunshine Exposure ; Vehicle Equipment – Thermal Resistance (artificial Sunlight Without Ultraviolet).
PSA : D45 5523 : marquage/Scratching/marking ; Scratch Test – Sclerometer Test
PSA : D45 5524 : marquage/Scratching/marking ; Plastics-resistance To The Stripe By Brightening
PSA : D47 1005 : Staining ; Textiles – Water And Other Staining
PSA : D47 1020 : Staining ; Coatings And Parts In The Passenger Compartment – Colour Fastness To Water, Sea Water And Perspiration
PSA : D47 1025 : Staining ; Strength Of Sweat Stains On
PSA : D47 1053 : Mechanical Testing ; Vulcanised Rubbers And Elastomersthermoplastics Accelerated Ageing In Air
PSA : D47 1098 : Mechanical Testing ; Rubbers – Thermoplastic Rubbers – Thermoplastics And Thermosettings Ageing In The Liquids And The Greases
PSA : D47 1100 : Ozone Testing ; Rubber Parts – Ageing In Ozonized Air
PSA : D47 1165 : Small Volume Climatic Chamber (
PSA : D47 1217 : Smell Tests/odour ; Felts – Padding – Wood Fibre – Behaviour In Humid Atmosphere Resistance To Micro – Organisms
PSA : D47 1279 : Staining ; Plastic Components – Behaviour When In Contact With Protection And Protection Removal Products
PSA : D47 1309 : Small Volume Climatic Chamber (
PSA : D47 1431 : Ci 3000 ; Materials And Parts In The Passenger Compartment Appearance Behaviour To Artificial Light At High And Mean Temperatures
PSA : D47 1847 : Acid Vapours Corrosion ; Plastics – Holding On For acid vapors Parts Molded Plastic Battery In
PSA : D47 1924 : Fluids ; Plastics And Rubbers – Occasional Contact With Automotive Fluids.
PSA : D47 5099 : Staining ; Resistance To Fluids (chemical Heating Pad)
PSA : D47 5243 : Staining ; Plastics – Colourfastness To Fluids
PSA : D47 5252 : Ci 3000 ;
PSA : D47 5448 : Fatigue ; Polyurethane Sealants for Glass Bonding – Aging In one Fatigue Test piece From Tension Shear
PSA : D47 5531 : Small Volume Climatic Chamber (
PSA : D49 1561 : Weather-ometer ; Plastics Tendency To Bleaching In Hot Water After Ageing In Light
PSA : D49 1653 : Staining ; Trimming Materials – Soiling And Cleaning Ability.
PSA : D51 1485 : Mechanical Testing ; Right Angle Peeling
PSA : ELEQCE02031402 : Psa Pollution ; Held From To Test And Moisture In The Atmospheric Corrosion Not Submitted Electronics For Bodies At runoff.
PSA : ELEQCE02031403 : Psa Pollution ; Held From To Test And Moisture In The Atmospheric Corrosion For Electronic Organ Located In The cockpit And Protection In The Box Of Electronics From Engine Compartment
Renault : 16-00-003 : Pièces en plastique – Prescriptions générales ;
Renault : 32-00-011 : Tenue à l’ensoleillement ;
Renault : 32-00-022 : Tenue à l’ensoleillement au moyen d’un simulateur solaire ;
Renault : 32-04-033 : Pièces du poste de conduite – Prescriptions générales ;
Renault : 32-08-803 : Aptitude au collage ;
Renault : 47-03-003 : Revêtements de peinture sur pièce extérieures de carrosserie en plastique ;
Renault : 47-03-003 §3.3.2 : Tenue à la fiente d’oiseaux ;
Renault : 47-03-005 : Revêtements de peinture et films par immersion pour pièces intérieures en plastique ;
Renault : B15 4510 : Revêtement par métallisation sous vide sur pièces en matière plastique ;
Renault : B15 5050 : Revêtements de peinture – Véhicules finis ;
Renault : B62 0200 : Pièces en plastique – Exigences spécifiques matériaux ;
Renault : B62 0300 : Matières thermoplastiques, thermodurcissables, élastomères thermoplastiques et caoutchoucs ;
Renault : B62 0400 : Pièces plastiques intérieures – Revêtement de peinture – Spécifications ;
Renault : D10 5495 : Evaluation de la quantité de composés organiques volatiles (COV) par thermodésorption ;
Renault : D10 5496 : Recherche de volatiles basiques type Amine dans les matériaux Polyuréthane ;
Renault : D10 5517 : Evaluation de l’intensité odorante ;
Renault : D11 1157 : Pelage à angle plat ;
Renault : D13 5486 : Test de corrosion accélérée cyclique ;
Renault : D14 1055 : Usure par frottement ;
Renault : D14 1425 : Résistance à l’abrasion rotative ;
Renault : D14 1428 : Resistance au grenaillage ;
Renault : D15 1343 : Comparaison visuelle des couleurs en cabine lumière ;
Renault : D15 5083 : Point de couleur (spectrocolorimétrie) ;
Renault : D17 1058 : Essai de brouillard salin à 5% NaCl ;
Renault : D17 2028 : Essai de corrosion par changement automatique des phases BS humidité et séchage (ECC1) ;
Renault : D21 3092 : Résistance au déchirement au scléromètre ;
Renault : D21 3093 : Adhérence du revêtement ‘croix scalpel’ ;
Renault : D23 1327 : Résistance à l’immersion dans l’eau ;
Renault : D23 5201 : Tenue aux crèmes et lotions ;
Renault : D24 1312 : Revêtements de peinture – Résistance au gravillonage ;
Renault : D24 1699 : Résistance à l’impact au moyen de billes rugueuses ;
Renault : D24 1702 : Résistance au grenaillage par projection de grenaille ;
Renault : D24 3098 : Résistance à l’abrasion ;
Renault : D24 5020 : Résistance à l’abrasion – Méthode de l’Abrex ;
Renault : D24 5021 : Résistance à l’hydrolyse ;
Renault : D24 5359 : Tenue aux brosses de lavage ;
Renault : D25 1413 : Mesure du brillant spéculaire ;
Renault : D25 2018 : Tenue au nettoyeur haute pression ;
Renault : D25 5001 : Evaluation de l’adhérence par la croix de Saint André ;
Renault : D27 1327 : Résistance à l’immersion dans l’eau (Bac Ford) ;
Renault : D27 1389 : Vieillissement artificiel au WeatherOmeter ;
Renault : D27 1433 : Tenue à l’acide sulfurique dilué ;
Renault : D27 1465 : Tâchage détrempe peinture ;
Renault : D27 1740 : Action des liquides organiques ;
Renault : D27 1911 : Tenue au vieillissement accéléré intempéries WOM Ci35 et Ci4000 ;
Renault : D27 5144 : Revêtements de peinture et produits assimilés – Tâchage ;
Renault : D27 5377 : Tachage par les produits chimiques ;
Renault : D27 5415 : Résistance aux attaques biologiques ;
Renault : D29 1476 : Lustrage peintures, vernis et produits assimilés ;
Renault : D40 1710 : Taux d’humidité ;
Renault : D40 5535 : Analyse du formaldéhyde et autres composés carbonylés par chromatographie liquide ;
Renault : D41 1013 : Matériaux en feuille – Mesure de l’épaisseur ;
Renault : D41 1015 : Pelage à 180° ;
Renault : D41 1029 : Textiles et textiles enduits – Traction ;
Renault : D41 1033 : Résistance au cisaillement des soudures HF ;
Renault : D41 1097 : Revêtement de sol – Poinçonnement ;
Renault : D41 1126 : Textile, TEP, feuilles plastiques, tapis – Déchirement ;
Renault : D41 1286 : Matériaux en feuille – Résistance au déchirement – Méthode au Diabolo ;
Renault : D42 1235 : Tenue aux chocs ;
Renault : D42 1775 : Résistance à la rayure par abrasion ;
Renault : D44 1221 : Résistance au grattage ;
Renault : D44 1237 : Abrasion par machine BTW ;
Renault : D44 1900 : Résistance au marquage ;
Renault : D44 3081 : Abrasion BTW ;
Renault : D45 1010 : Solidité de la teinte aux frottements ;
Renault : D45 1012 : Matériaux en feuille – Masse surfacique ;
Renault : D45 1195 : Matériaux souples – épaisseur et compressibilité ;
Renault : D45 1197 : Feutre ouate – Délaminage ;
Renault : D45 1301 : Matériaux de garnissage – Souplesse ;
Renault : D45 1333 : Combustibilité horizontale ;
Renault : D45 1601 : Volatilité des adjuvants sur une seule face ;
Renault : D45 1727 : Fogging-Embuage ;
Renault : D45 1817 : Comportement à la salissure ;
Renault : D45 1837 : Tâchage par des fluides automobiles ;
Renault : D45 5232 : Tenue thermique (rayonnement artificiel sans UV) ;
Renault : D45 5523 : Tenue à la rayure (test au scléromètre) ;
Renault : D45 5525 : Résistance à la rayure par quadrillage ;
Renault : D47 1005 : Tachage à l’eau ;
Renault : D47 1020 : Solidité de la teinte à la sueur ;
Renault : D47 1100 : Vieillissement dans l’air ozonisé (tenue à l’ozone) ;
Renault : D47 1122 : Solidité de la teinte à la lumière artificielle à base température ;
Renault : D47 1165 : Vieillissements accélérés ;
Renault : D47 1199 : Tachage par les matériaux constitutifs ;
Renault : D47 1217 : Résistance aux micro-organismes ;
Renault : D47 1234 : Comportement à la chaleur en étuve non radiante ;
Renault : D47 1279 : Tenue aux produits de conditionnement et déconditionnement ;
Renault : D47 1309 : Vieillissement suivant cycle climatique donné ;
Renault : D47 1431 : Solidité de la teinte à la lumière artificielle à haute et moyenne température ;
Renault : D47 1915 : Solidité de la teinte aux fluides et à la lumière ;
Renault : D47 1934 : Tendance à al salissure des garnitures de pavillon ;
Renault : D47 3000 : Tendance à la salissure et à la nettoyabilité ;
Renault : D49 3001 : Mesure de l’intensité et caractérisation de l’odeur dans sa globalité ;
Renault : D49 3027 : Analyse des composés organiques volatiles (COV) émis par les pièces d’habitacle ;
Renault : D49 3046 : Mesure de l’intensité et caractérisation de l’odeur de pièces d’habitacle en chambre climatique ;
Renault : D49 3091 : Tenue au blanchiment à l’eau savonneuse chaude ;
Renault : D51 1485 : Pelage à angle droit ;
Renault : D51 1755 : Adhérence du revêtement par arrachement au plot collé ;
Renault : D51 3022 : Pelage à angle droit ;
Renault : ISO 2409 : Adhérence au ruban adhésif après quadrillage ;
Renault : ME 1428 : Résistance au grenaillage ;
Renault : 1323 : High Condensation Chamber ; Resistance To Humidity
Renault : 1428 : Shot Blasting/Chipping Tests ; Nti-chip Products – Plastics – Rubbers – Resistance To Shot Blasting
Renault : 1522 : Microscopy ; Thickness Of A Paint Film
Renault : 1600003 : Fluids ; Plastic Parts – General Requirements
Renault : 1653 : Staining ; Tendency To Become Soiled
Renault : 3000118 : Rubber Parts ;
Renault : 3006001 : Bonding Mounting Flanges On Security Windows ;
Renault : 30EE102 : Small Volume Climatic Chamber (
Renault : 3100805 : Special Mechanical Tests ; Insert Rotation Resistance
Renault : 3200008 : Smell Tests/odour ; Interior Trim Parts General Requirements.
Renault : 3200011 : Halogen Sunshine Exposure ; Resistance To Sunlight Of Bodywork And Accessories By Means Of An Insolation Cabin
Renault : 3200012 : Miscellaneous Climatic ; Wooden Trims
Renault : 3204033 : Vehicle Cockpit Parts- General Requirements ;
Renault : 3204034 : Side Skirts In Thermoplastic ;
Renault : 3204806 : Special Mechanical Tests ;
Renault : 3204809 : Fluids ; Grids Plastic From Awning From Beach
Renault : 3204813 : Wheels House Inner Liners Ans Wheel Shields ;
Renault : 3204822 : Valence Panel Polypropylene Expanders ;
Renault : 3204841 : Adhesion ; Monograms – Badges – Emblems – Pulling Resistance.
Renault : 3204843 : Special Mechanical Tests ; Finishing element Door Of Safe
Renault : 3206541 : Overmoulded Moulding Seals On Fixed Windows ;
Renault : 3207004 : Mechanical Testing ; From Door trim panel
Renault : 3207523 : Smell Tests/odour ;
Renault : 3208000 : ou D’un Détecteur De Lumière/Windscreen Fitted With A Rain Detector And/or Light Detector ;
Renault : 3208803 : Safety Windowpans – Sunroofs – Bonding Capacity ;
Renault : 3209003 : Staining ; External Rear-view Mirrors
Renault : 3209881 : Interior Rear View Mirrors ;
Renault : 3209890 : Staining ; Plastic Bumpers – Requirements
Renault : 3404816 : Cycled Pressure Testing ; Parts Of The Fuel System – Endurance In Cycled Pressure
Renault : 3404831 : cdc/Miscellaneous Automotive ; Fuel System Parts
Renault : 3404892 : cdc/Miscellaneous Automotive ; Fuel System Lines
Renault : 3406002 : Pipes Circuit Cooling ;
Renault : 3407000 : Cycled Pressure Testing ; Endurance Under Cycled Pressure
Renault : 3600802 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Recommended Requirements For Physico Chemical Environment Of On Board – Electrical And Electronic Equipments
Renault : 3604016 : Small Volume Climatic Chamber (
Renault : 3605019 : cdc/Miscellaneous Automotive ; Electrical Connections And Connectors
Renault : 3605218 : cdc/Miscellaneous Automotive ; A Crimp lugs (electric)
Renault : 3607007 : Window Defrosting And Demisting Electrical Heating Networks ;
Renault : 3607221 : Miscellaneous Test Benches ; Defrosting System Effectiveness Test
Renault : 3607233 : Rings and Bellows Of Protection Of Electric Cables ;
Renault : 3906204 : Hot Air Pulse ; On air ducts For Intake System
Renault : 3906206 : Vibration + Cycled Pressure ; Fittings For Circuit De Liquid Cooling
Renault : 3909005 : Double-sided Self-adhesive Tapes ;
Renault : 4701002 : cdc/Miscellaneous Automotive ; Electrolytic coatings Decoratifs Pieces Of Plastic
Renault : 4702901 : Staining ; Anodizing Of Aluminium Parts And In Aluminium Alloys With Or Without Organic Coating
Renault : 4703003 : Paint Coating On External Plastic Body Parts. ;
Renault : 4703008 : Fluids ; Decorative Paint Coatings On Plastic Parts
Renault : D11 1054 : Special Mechanical Tests ; Suppleness Of A Piece By Impression Of A Hemispherical – Punch Beads – Protective Strips – Armrests – Various Trimming
Renault : D11 1157 : Mechanical Testing ; Adhesives – Flat Angle Peeling
Renault : D14 1055 : usure/Abrasion/wear ; Materials And Organic Coatings – Wear Due To Friction
Renault : D15 1343 : brillance/Colorimetry/gloss ; Coloured Materials – Visual Comparison Of The Aspects In A Light Chamber
Renault : D15 5083 : brillance/Colorimetry/gloss ; Opaque Coloured Products – Calculation Colorimatric Difference
Renault : D17 1058 : Salt Spray Testing ; Salt Spray Test
Renault : D17 1686 : alternee En Manuel/3c Corrosion/manual Alternate ; Corrosion 3c
Renault : D17 1687 : Staining ; Deconditionning Products Resistance
Renault : D17 1736 : brillance/Colorimetry/gloss ; Paints And Plastics – Colour Variation Test Using Colorimeter
Renault : D17 2028 : Ecc1 ; Corrosion Test By Automatic Change Of Phases Of Salt Spray, Drying And Humidity (ecc1)
Renault : D17 3021 : Swaat Test ; Aluminium Tubes – External Corrosion
Renault : D19 3020 : Light Transmission Of Curtains In The Middle Of A Visible In spectrophotocolorimeter ;
Renault : D19 3056 : Touch Tests ; Tactile Characterization – Interior And Exterior Equipment Parts – Qualitative And Quantitative Measurement Of Material And Part Texture – Tactile Sensory Profile
Renault : D20 1057 : Miscellaneous (subcontracting) ; Micrographic Examination Of Superficial Deposits (pieces Covered By Superficial Deposits)
Renault : D21 3092 : Cross-cut Tests ; Paints And Related Products Applied Onto Plastic Material – Tearing – Resistance Measured With Sclerometer
Renault : D21 3093 : Cross-cut Tests ; Paints And Related Products Applied To Rigid Plastic Material – Paint Coating Adhesion “cross Scalpel”
Renault : D23 1001 : Cass Test ; Cupro-acetic Salt Spray Test Cass-test Metallic Coating
Renault : D23 1327 : High Condensation Chamber ; Resistance To Water Immersion – Primer Films – Paints And Assimilated Preparations
Renault : D24 1699 : Shot Blasting/Chipping Tests ; Paint Resistance To Impact Using Rough Surfaced Balls
Renault : D24 1702 : Shot Blasting/Chipping Tests ; Paints – Resistance To Gritting By Shot Blasting
Renault : D24 1732 : Paintings And Assimilated Products – Resistance To The Action Of Brushes wash Mechanics ;
Renault : D24 5359 : Car-wash Test ; Paint Coatings Resistance To The Action Of Mechanical Washing Brushes
Renault : D25 1254 : Cross-cut Tests ; Bonding To Strips
Renault : D25 1324 : Small Volume Climatic Chamber (
Renault : D25 1413 : brillance/Colorimetry/gloss ; Paint Coatings, Plastics And Rubbers – Gloss Measurement
Renault : D25 1816 : Fluids ; Paintings From coverings – Resistant To The Tempera
Renault : D25 1968 : brillance/Colorimetry/gloss ; Paints And Related Products Paint – Appearance Measurement
Renault : D25 2018 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Decorative Coatings – Resistance To Washing With High Pressure Cleaner
Renault : D26 5316 : Measurement Of Non Destructive thickness ;
Renault : D27 1465 : Staining ; Paint Coatings – Action Of Solid Or Paste Organic Materials
Renault : D27 1740 : Staining ; Paint Coatings – Action Of Organic Liquids
Renault : D27 1911 : Weather-ometer ; Rubber And Plastic – Paint Coatings – Artificial Ageing Using Weatherometer
Renault : D33 1715 : Cass Test ; Wheels And Wheel Trims Alloy Lightweight Coated – Cyclic Corrosion Test
Renault : D40 3004 : Formaldehyde ; Analysis Of Formaldehyde And Other Carbonyl Compounds In The Materials Of Vehicle Passenger Compartment By Liquid Chromatography
Renault : D41 1003 : Mechanical Testing ; Flexible Alveolate Materials For Trimming – Compressive Strength
Renault : D41 1013 : Miscellaneous ; Sheet Materials – Thickness Measurement
Renault : D41 1015 : Mechanical Testing ; Trim Materials Peeling At 180°
Renault : D41 1029 : Mechanical Testing ; Textiles – Textiles Coated And Leathers – Tensiles
Renault : D41 1048 : Mechanical Testing ; Flexible And Semi-rigid Alveolar Materials – Resistance To Tearing
Renault : D41 1097 : Mechanical Testing ; Floor Coverings And Trim Coverings – Resistance To Punching
Renault : D41 1099 : Mechanical Testing ; Tensile Strength
Renault : D41 1108 : Mechanical Testing ; Adhesives – Tensile/shear Strength (shim Method)
Renault : D41 1126 : Mechanical Testing ; Fabrics – Tep – Plastics Plates – Carpet – Tear
Renault : D41 1286 : Special Mechanical Tests ; Sheet Materials – Resistance To Tearing – Diabolo Method
Renault : D41 1507 : Mechanical Testing ; Tear Resistance
Renault : D41 1536 : Conglomerate Wood, Carboard – Bending Test ;
Renault : D41 1540 : Mechanical Testing ; Rubber Or Plastic Based Cellular Materials Permanent Set At Constant Deformation
Renault : D41 1637 : Mechanical Testing ; Flexible Alveolar Materials – Residual Misshapeness In Humid Atmospheric
Renault : D41 1643 : Mechanical Testing ; Composite Materials – Bending
Renault : D42 1007 : usure/Abrasion/wear ; Plastic Coated Textiles – Leathers – Creasing
Renault : D42 1235 : Chutes/Dropping Tests ; Plastic Or Rubber Parts Impact Behaviour (mass Drop Method)
Renault : D42 1541 : Mechanical Testing ; Flexible And Semi- Flexible Cellular Materials – Resistance A La Compression
Renault : D42 1775 : marquage/Scratching/marking ; Interior And Exterior Plastic Parts – Resistance To Scoring By Abrasion
Renault : D42 2036 : usure/Abrasion/wear ; External Painted Parts – Resistance To Scoring Due To Abrasion
Renault : D42 3109 : Voc Testing ; gc/ms/ (fid)/Materials In Vehicle Passenger Compartment – Assessment Of The Quantity Of Volatile Organic Compounds (voc) By Thermodesorption Gc/ms (fid)
Renault : D44 1073 : usure/Abrasion/wear ; Creeling Materials Wear-out Due To Friction
Renault : D44 1119 : usure/Abrasion/wear ; Resistance To Abrasion (method Of Abrasive Cylinder) Flexible Rubber And Plastic
Renault : D44 1221 : marquage/Scratching/marking ; Materials With Brushed Velour Surface – Resistance To Scuffing
Renault : D44 1900 : marquage/Scratching/marking ; Plastics – Resistance To Marking (resistance To Scoring Through Polishing)
Renault : D44 1959 : usure/Abrasion/wear ; Rubbers And Plastics For Mechanical Protective Sheathing – Resistance To Rubbing
Renault : D45 1010 : Rubbing ; Polymer Materials And Parts Inside And Outside Passenger Compartment – Colourfastness To Rubbing
Renault : D45 1012 : Miscellaneous ; Sheet Materials – Weight Per Unit Area
Renault : D45 1046 : Mechanical Testing ; Soft Honeycombed Trimming Materials – Residual Deformation After Compression With Constant Thickness
Renault : D45 1132 : Mechanical Testing ; Compact Rubbers – Compression Set At Constant Deformation
Renault : D45 1139 : Filling materials De-Dimensional variations appearance And On Changing For The Heat ;
Renault : D45 1195 : Mechanical Testing ; Felts And Paddings – Thickness And Compressibility
Renault : D45 1197 : Mechanical Testing ; Felts, Wadding – Separation
Renault : D45 1231 : Mechanical Testing ; Residual Distortion On Traction
Renault : D45 1291 : Hardness ; Rubbers And Plastics- Shore A Or D Hardness
Renault : D45 1301 : Special Mechanical Tests ; From Filling Materials Flexibility
Renault : D45 1333 : Horizontal Flammability ; Horizontal Flammability (materials Inside Passenger Compartment)
Renault : D45 1564 : Small Volume Climatic Chamber (
Renault : D45 1601 : Volatility ; Passenger Compartment Materials – Volatility Of Additives On One Single Surface
Renault : D45 1727 : Fogging ; Interior Trim Materials And Passenger Compartment Parts – Fogging
Renault : D45 1730 : Fire Testing ; Ashtrays Fire Resistance – Incandescent Wire Test
Renault : D45 1817 : Staining ; Organic Materials And Coatings Soiling Resistance
Renault : D45 1837 : Staining ; Paint Coatings On Plastic Parts And Mass – Staining Of Colored Materials By Automotive Fluids
Renault : D47 1005 : Staining ; Trim Materials – Stain With Water Or Others
Renault : D47 1020 : Staining ; Coatings And Passenger Compartment Parts – Colorfastness To Water, To Sea-water And To Sweat
Renault : D47 1035 : Staining ; Rubbers And Plastics – Staining
Renault : D47 1053 : Mechanical Testing ; Accelerated aging In The Air
Renault : D47 1098 : Fluids ; Ageing In Fluids And Greases
Renault : D47 1100 : Ozone Testing ; Rubbers – Ageing In Ozonised Air
Renault : D47 1122 : Ci 3000 ; Materials And Passenger Compartment Parts – Behaviour Of The Appearance To Artificial Light At Low Temperature
Renault : D47 1165 : Small Volume Climatic Chamber (
Renault : D47 1199 : Staining ; Cardboard – Wood – Plastic – Mottling Via A Trim Part’s Constituent Materials
Renault : D47 1217 : Smell Tests/odour ; Fibrous Materials – Behaviour In Damp Atmosphere – Resistance To Micro-organisms
Renault : D47 1234 : Small Volume Climatic Chamber (
Renault : D47 1279 : Weather-ometer ; Plastic And Rubber Parts – Resistance To Bodywork – Conditioning And Deconditioning – Products
Renault : D47 1309 : Small Volume Climatic Chamber (
Renault : D47 1407 : Staining ; Rubber And Plastics – Rubbers And Plastics – Effect Of Protective Coating Products
Renault : D47 1431 : Ci 3000 ; Materials And Passenger Compartment Parts – Behaviour Of The Appearance To Artificial Light At High And Medium Temperatures
Renault : D47 1748 : Fluids ; Plastics- Ageing In Fluids
Renault : D47 1850 : Mechanical Testing ; Heat Ageing On Plastic Sheeting
Renault : D47 1915 : Staining ; Plastics – Colourfastness In Contact With Fluids
Renault : D47 1924 : Fluids ; Plastics And Rubbers – Occassional Contact With Automobile Fluids
Renault : D47 1934 : Staining ; Trim For Roof Panel – Tendency To Soiling
Renault : D49 1561 : Staining ; Tendency To Bleach In Hot Water
Renault : D49 3001 : Smell Tests/odour ; Given Off Odours, Internal Equipment Parts – Intensity Evaluation And Global Odour Characterisation
Renault : D49 3027 : Voc Testing ; Analysis Of Volatile Organic Compounds Emitted By The Interior Parts
Renault : D49 3046 : Smell Tests/odour ; Odour Emissions – Interior Equipment Parts – Measurement Of The Intensity And Characterization Of Odour From Parts In Passenger Compartment In Climatic Chamber
Renault : D49 3085 : Formaldehyde ; Analysis Of Aldehydes And Ketones Emitted By Interior Equipment In Climate Room
Renault : D49 3091 : Weather-ometer ; Resistance To Whitening By Hot Soapy Water Of Parts In Styrene Materials For The Exterior
Renault : D51 1485 : Mechanical Testing ; Adhesive Peeling At A Right Angle
Renault : D51 1709 : Mechanical Testing ; Window Bonding – Adhesion On Paint Coatings
Renault : D51 1755 : Adhesion ; Paints And Related Products Applied To Rigid Material – Coating Adhesion By Bonded Stud Pull – Off Test
Renault : D51 3022 : Mechanical Testing ; Interior Trim Materials – Right- Angle Peeling
Renault : D57 1767 : Aux-held Paintings From bird droppings ;
Renault : ISO 2409 : Cross-cut Tests ; Paints And Varnishes – Cross-cut Test
Renault : T 30-123 : Microscopy ; Paints – Determination Of The Thickness Of The Dry Film – Microscope Methods
Rover : LRLTM.30.CF.005 : Color fastness to light ;
Rover : LRLTM.30.CF.006 : Color fastness to light ;
Rover : LRLTM.30.CT.900 : Resistance to humidity under condensation conditions ;
Rover : LRLTM.30.EE.102 : Accelerated climatic testing ;
Rover : LRLTM.30.HA.104 : Resistance to heat ageing ;
Rover : LRLTM.30.MS.302 : Flammability ;
Rover : LRLTM.30.ST.133 : Extraction staining ;
Rover : TPJLR-52-002 : Mar Resistance ;
Rover : TPJLR-52-003 : Abrasion Resistance ;
Rover : TPJLR-52-104 : Determination of VOC and Carbonyl Emissions for Interior Trim Materials ;
Rover : TPJLR-52-351 : Resistance to Humidity ;
Rover : TPJLR-52-352 : Resistance to Heat Ageing ;
Rover : TPJLR-52-353 : Accelerated Environmental Cycling ;
Saab : STD 1082 : Fogging ;
Saab : STD 1363 : Tensile and tear strength Plastic ;
Saab : STD 2241 : Resistance to moisture ;
Saab : STD 3159 : UV resistance, Xenon lamp ;
Saab : STD 3802 E : Basic requirements for polymeric materials and interior materials ;
Saab : STD 3816 E : Grading scales for environmental zone related requirements ;
Saab : STD 3907 : Cycling of climate ;
Saab : STD 3965 : Chemical Resistance ;
Saab : STD 5095 : Painting of interior parts ;
SAE : SAE J 1756 : Fogging ; Determination Of The Fogging Characteristics Of Interior Automotive Materials
SAE : SAE J 1885 : Weather-ometer ; Accelerated Exposure Of Automotive Interior Trim Components Using A Controlled Irradiance Water Cooled Xenon Arc Apparatus.
SAE : SAE J 2412 : Weather-ometer ; Accelerated Exposure Of Automotive Interior Trim Components Using A Controlled Irradiance Xenon – Arc Apparatus
SAE : SAE J 365 : martindale/Taber/martindale Abrasion ; Resistance To Scuffing Of Trim Materials
SAE : SAE J 400 : Shot Blasting/Chipping Tests ; Chip Resistance
SAE : SAE J 575 : Test Methods And Equipement For Lighting Device And Components For Use On Vehicles Less Than 20 ;
SAE : SAE J 948 : martindale/Taber/martindale Abrasion ; Abrasion
SUZUKI : SES D 2403 : Quality Classification Of Pressure Sensitive Adhesive Film For Decoration ;
SUZUKI : SES N 3243 : Painting Quality Of Plastic Parts ;
Toyota : TSF 5350G : Performance test for plastic door outside handles ;
Toyota : TSH 1501G : Print resistance of paint film ;
Toyota : TSH 1503G : Adhesive property of paint film ;
Toyota : TSH 1504G : Flexibility of paint film ;
Toyota : TSH 1508G : Volatile solvent resistance ;
Toyota : TSH 1509G : Chemical resistance ;
Toyota : TSH 1513G : Fading property of paint film ;
Toyota : TSH 1519G : Gloss of paint film ;
Toyota : TSH 1520G : Light transmittance of paint film ;
Toyota : TSH 1539G : Hardness of paint film ;
Toyota : TSH 1544G : Nail scratch resistance of paint film ;
Toyota : TSH 1562G : Grease staining resistance ;
Toyota : TSH 1564G : Fogging test ;
Toyota : TSH 1581G : Outdoor weather resistance for paint film ;
Toyota : TSH 3130G : Paint quality for interior parts ;
Toyota : TSH 3131G : Coating quality of exterior parts ;
Toyota : TSL 0601G : Criteria for test for quality of color change by ageing ;
Toyota : TSL 2100G : Standard test methods for woven fabrics ;
Toyota : TSL 3600G : Carpet materials ;
Toyota : TSM 0500G : Flammability test ;
Toyota : TSM 0501G : Standard test methods for plastic molding materials ;
Toyota : TSM 0502G : General test methods regarding material properties for plastic parts ;
Toyota : TSM 0503G : Fogging test method ;
Toyota : TSM 0505G : Smell quality ;
Toyota : TSM 0508G : Volatile component measurement using sampling bags ;
Toyota : TSC 1000G : Test Methods For Terminals And Connectors Of Low Tension Cables For Automobiles ;
Toyota : TSC 3000G : Cxw (open Carbon Arc) ; General Test Method For Lighting Devices
Toyota : TSC 5209G : Wiper Arm And Blade ;
Toyota : TSF 6773G : Driver Side Electrical Air Bag ;
Toyota : TSF 7365G : Evaluation Methods And Quality Requirements Concerning Characteristics Of Nonmetallics Materials Of The Cockpit ;
Toyota : TSH 1503G : Adhesion ; Test Method For Adhesive Property Of Paint Film
Toyota : TSH 1505G : Small Volume Climatic Chamber (
Toyota : TSH 1509G : Test Method For Chemical Resistance Of Paint Film ;
Toyota : TSH 1539G : marquage/Scratching/marking ; Test Method For Hardness Of Paint Film
Toyota : TSH 1552G : Salt Spray Testing ; Test Method Of Salt Spray
Toyota : TSL 2100G : Standard Test Methods For Woven Fabrics And Knitted Fabrics. ;
Toyota : TSM 0500G : Horizontal Flammability ; Flammability Test Method For Interior Non Metallic Materials
Toyota : TSM 0501G : Cdmc (closed Carbon Arc) ; Plastic Molding Materials
Toyota : TSM 0502G : Fluids ; General Test Method Regarding Material Properties For Plastic Parts.
Toyota : TSM 0503G : Fogging ; Fogging Test Method For Non Metallic Materials
Toyota : TSM 0504G : Flammability Test Method For Non-metallic Materials In Engine Compartment. ;
Toyota : TSM 0505G : Smell Tests/odour ; Smell Quality Of Non-metallic Materials
Toyota : TSM 0506G : Stantard Test Methods For Plastic Molding Materials For Compliance With Iso ;
Toyota : TSM 0508G : Voc Testing ; Volatile Component Measurement Method Using Sampling Bag
Toyota : TSR 7506G : Glass With Lead-free Black Ceramic Coating ;
VDA : 621412 : Fluids ; Auto-strength Plates For Chemicals
VDA : 621415 : alternee En Manuel/3c Corrosion/manual Alternate ; Paint Corrosion By Variable Cyclical Stress
VDA : 75202 : Ci 3000 ; Tests for color fastness and aging behavior at high temperatures Backlit xenon arc light
VDA : VDA 270 : Smell Tests/odour ; Characterisation Of The Odours From Motor Vehicle Interior Parts Materials
VDA : VDA 275 : Formaldehyde ; Formaldehyde
VDA : VDA 276 : Smell Tests/odour ; Determination Of Organic Substances As Emitted From Automotive Interior Products Using A 1 M3 Test Cabinet
VDA : VDA 277 : Voc Testing ; Cov
VDA : VDA 278 : Voc Testing ; Analysis By Thermodesorption Of Organic Emissions For The Characterization Of Nonmetallic Materials For The Interior Of A Vehicle
Volkswagen : PV 1200 : Resistance to environmental cycle test ;
Volkswagen : PV 1210 : Corrosion Test ;
Volkswagen : PV 1303 : High temperature light exposure ;
Volkswagen : PV 1323 : UV Radiation on Thermoplastic Material, outside in Suntest ;
Volkswagen : PV 1503 : Pressure Washer Test ;
Volkswagen : PV 2005 : Resistance to environmental cycle test ;
Volkswagen : PV 3015 : Determining Condensable Constituents (G) ;
Volkswagen : PV 3307 : Plastic and Elastic Deformability ;
Volkswagen : PV 3341 : Emission of organic compounds ;
Volkswagen : PV 3900 : Odor Test ;
Volkswagen : PV 3904 : Flame retardance ;
Volkswagen : PV 3905 : Ball drop test ;
Volkswagen : PV 3906 : Testing of Abrasion Behavior ;
Volkswagen : PV 3909 : Measurement of Static and Permanent Elongation ;
Volkswagen : PV 3925 : Measurement of Formic Aldehyde emissions ;
Volkswagen : PV 3929 : Weathering in Dry, Hot Climate ;
Volkswagen : PV 3930 : Weathering in Moist, Hot Climate ;
Volkswagen : PV 3952 : Testing of Scratch Resistance ;
Volkswagen : PV 3964 : Testing of Cream Resistance ;
Volkswagen : TL 1010 : Burning Behavior ;
Volkswagen : TL 211 : Paint Coating on Exterior Plastic Parts ;
Volkswagen : TL 218 : Body Color Multicoat Paint on Metallic Exterior Body Components – Requirements ;
Volkswagen : TL 226 : Paint Coating on Materials Used in the Vehicle Interior Trim ;
Volkswagen : TL 256 : Powder Paint on Metal Surfaces – Requirements ;
Volkswagen : TL 52231 : ABC and PC Polymer Blends – Material requirements ;
Volkswagen : TL 52311 : ASA Graft Polymer – Material requirements ;
Volkswagen : TL 52451 : Painting of Metallic Decorative Add-on Parts for the Exterior – Requirements ;
Volkswagen : TL 52636 : POM, Finished Parts – Material requirements ;
Volkswagen : TL 528 : Chrome-Plated Plastic Parts – Material requirements ;
Volkswagen : TL 591 : Organic Glasses for Lights – Material requirements ;
Volkswagen : VW 440 45 : Polypropylene, Finished Parts – Material requirements ;
Volkswagen : VW 501 25 : Polyamide 6, Finished Parts in the Passenger Compartment – Material requirements ;
Volkswagen : VW 501 85 : Resistance to Open Air Weathering ;
Volkswagen : VW 501 95 : Colorimetric Evaluation of Automobile Paint Coatings ;
Volkswagen : VW 50180 : Emission Behavior ;
Volkswagen : VW 50190 : Colorimetric Evaluation ;
Volkswagen : PV 1200 : Small Volume Climatic Chamber (
Volkswagen : PV 1210 : alternee En Manuel/3c Corrosion/manual Alternate ; Corrosion
Volkswagen : PV 1303 : Ci 3000 ; Non-metallic Materials – Exposure Test Of Passenger Compartment Components.
Volkswagen : PV 1306 : Non Metallic Materials- Exposure Test For Determining The Tackiness Of Polypropylene Parts ;
Volkswagen : PV 1323 : Sun Test ; Uv Radiation On Thermoplastic Material, Outside In Suntest (non-metallic Materials)
Volkswagen : PV 1502 : Weather-ometer ; Peinture Métallique Application À 2 Couches (uv)
Volkswagen : PV 1503 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Paint Coating Of Metallic And Non-metallic Materials- Pressure Washer Test.
Volkswagen : PV 2005 : Small Volume Climatic Chamber (
Volkswagen : PV 3015 : Fogging ; Non-metallic Materials For Interior Trim – Determining Condensable Constituents (g)
Volkswagen : PV 3341 : Voc Testing ; Emissivity Of Organic Materials Chromato
Volkswagen : PV 3356 : martindale/Taber/martindale Abrasion ; Textile – Behaviour In And For Cleaning Dirt
Volkswagen : PV 3900 : Smell Tests/odour ; Passenger Compartment Components – Odour Test
Volkswagen : PV 3902 : Xenotest 150 ; Xenotest 150s
Volkswagen : PV 3905 : Chutes/Dropping Tests ; Kugelfall-prufung
Volkswagen : PV 3906 : Rubbing ; Non-metallic Planar Materials – Testing Of Abrasion Behavior
Volkswagen : PV 3925 : Formaldehyde ; Polymer Materials – Measuring Emissions Of Formaldehyde
Volkswagen : PV 3929 : Weather-ometer ; Non – Metallic Materials- Weathering In Dry, Hot Climate
Volkswagen : PV 3930 : Ci 3000 ; Non- Metallic Materials- Weathering In Moist, Hot Climate
Volkswagen : PV 3937 : Volatility ; Amine Emissions From Pur Flexible Foam
Volkswagen : PV 3952 : marquage/Scratching/marking ;
Volkswagen : PV 3964 : Fluids ; Surfaces In The Passenger Compartment- Testing Of Cream Resistance.
Volkswagen : TL 1010 : Horizontal Flammability ; Materials For Vehicle Interiors – Burning Behavior, Material Requirements.
Volkswagen : TL 203 : Electroplated Nickel-chromium Coatings ;
Volkswagen : TL 211 : Paint Coatings On Exterior Plastic Parts ;
Volkswagen : TL 226 : Paint On Materials Of The Vehicle Interior Equipment ;
Volkswagen : TL 256 : Protection Of Surface ;
Volkswagen : TL 52058 : Special Mechanical Tests ; Minor Base Plate Bond- Material And Adhesive Bond Requirements
Volkswagen : TL 52231 : Abs And Pc Polymer Blends ;
Volkswagen : TL 52288 : Polyamide Mineral Reinforced Finished Parts. ;
Volkswagen : TL 52451 : Painting Of Decorative Metallic Add-on Parts On The Exterior ;
Volkswagen : TL 528 : Chrome-plated Plastic Parts ;
Volkswagen : TL 82421 : Quick Coupling ;
Volkswagen : VW 80101 : Electrical And Electronic Assemblies In Motor Vehicles ;
Volvo : STD 1024,7122 : martindale/Taber/martindale Abrasion ; Martindale Abrasion
Volvo : STD 10272739 : Formaldehyde ; Determination Of Formaldehyde Emission From Components Of Vehicle Interiors – Organic Materials
Volvo : STD 102954719 : aspersion-immersion Eau)/Ip (dust/sprinkling Tests) ; Adhesion Water Spraying Under High Pressure
Volvo : STD 420-0003 : Fogging ; Fogging
Volvo : STD 429-0001 : Smell Tests/odour ; Odour Of Trim Materials In Vehicles
Volvo : STD 429-0002 : Formaldehyde ; Determination Of Formaldehyde Emission From Components In Vehicle Interiors
Volvo : STD 4290003 : Voc Testing ; Determination Of Organic Emissions From Non-metallic Materials In Vehicle Interiors
Volvo : STD 800 00003 : Staining ; Soiling And Cleaning Of Plastic Surfaces
Volvo : STD 850 00010 : Staining ; Resistance To Staining, Soiling Resistance And Cleanability Of Woven Or Knitted Textile Materials
Volvo : STD 850 42802 : Staining ; Resistance To Stain Removing Agent
Volvo : STD 881 00002 : Rubbing ; Abrasion-resistance Of Soft And Had Plastic Surface
Volvo : VCS 1027,2719 : Fogging ; Fogging
Volvo : VCS 1027149 : alternee En Manuel/3c Corrosion/manual Alternate ; Accelerated Corrosion Test- Atmospheric Corrosion
Volvo : STD 1024,3113 : Scratch resistance ;
Volvo : STD 1024,7134 : Abrasion ;
Volvo : STD 1026,5172 : Determination of colour in colour-matching booth ;
Volvo : STD 1026,5272 : Gloss ;
Volvo : STD 1026,8242 : Colour fastness to artificial light at 100°C ;
Volvo : STD 1026,8243 : Lightfastness at 60°C ;
Volvo : STD 1027,14 : Accelerated corrosion test ;
Volvo : STD 1027,2231 : Heat ageing ;
Volvo : STD 1027,2711 : Fogging ;
Volvo : STD 1027,2712 : Odour of trim materials ;
Volvo : STD 1027,2713 : Determination of formaldehyde emission ;
Volvo : STD 1027,2714 : Determination of organic emission ;
Volvo : STD 104-0001 : Flammability ;
Volvo : STD 121-0001 : Painting Y600 ;
Volvo : STD 232 : Combustibility ;
Volvo : STD 252 : Plastic foil – Testing regulation ;
Volvo : STD 411-0001 : Plastics ;
Volvo : STD 420-0003 : Fogging ;
Volvo : STD 422-0004 : Staining of organic finishes ;
Volvo : STD 422-0006 : Resistance to short duration contact with fluids ;
Volvo : STD 423-0004 : Charpy impact properties ;
Volvo : STD 423-0009 : Adhesion ;
Volvo : STD 423-0011 : Chemical resistance, hot plate ;
Volvo : STD 423-0012 : Adhesion, cross-cut test ;
Volvo : STD 423-0014 : Accelerated corrosion test ;
Volvo : STD 423-0015 : Adhesion, water spraying under high pressure ;
Volvo : STD 423-0018 : Moisture resistance in tropical cabinet ;
Volvo : STD 423-0019 : Car-wash mar-resistance ;
Volvo : STD 423-0030 : Scratch resistance, Erichsen pen ;
Volvo : STD 423-0037 : Colour fastness to rubbing ;
Volvo : STD 423-0040 : Scratch resistance using abrasive paper ;
Volvo : STD 429-0001 : Odour of trim materials in vehicles ;
Volvo : STD 429-0002 : Determination of formaldehyde emission ;
Volvo : STD 429-0003 : Determination of organic emissions ;
Volvo : STD 857 : Determination of adhesion, crosscut method ;
Volvo : VCS 1024,71329 : Stone chip resistance ;
Volvo : VCS 1026,52759 : Gloss of interior materials ;
Volvo : VCS 1027,2719 : Fogging ;
Volvo : VCS 1027,2729 : Odour of trim materials ;
Volvo : VCS 1027,2739 : Determination of formaldehyde emission ;
Volvo : VCS 1027,2749 : Determination of organic emission ;
Volvo : VCS 1027,3379 : Light exposure ;
Volvo : VCS 1027,359 : Colour fastness to artificial light at 75°C ;
Volvo : VCS 5031,19 : Flammability ;