AUTOMOTIVE TESTS-AMECA Related

AUTOMOTIVE – 자동차부품 관련 시험   [ 1 ]   [ 2 ]

  1. BMW 3.2.4.2 Pile Yarn Thicknessautomotive MS test
  2. BMW 3.2.10 Imprint Behavior Without Foam Impression Depth, 60 Minutes and 24 hours [DIN 54316 / EN20 105 A02]
  3. BMW 3.2.10.2 Tested at 60 degrees C, Impression Depth at 60 minutes and 24 hours
  4. BMW 3.2.10.3 Tested Wet after 50 Minute Soak, Impression Depth at 60 minutes and 24 hours
  5. BMW 3.2.7 Number of Tufts
  6. BMW 3.3.1 Abrasion Resistance with Loss of Weight and Change in Color [DIN 53 109 & EN 20 105 A02]
  7. BMW 3.3.2 Colorfastness to Light [1 cycle Blue Wool
  8. BMW 3.3.3 Colorfastness to Crocking [wet and Dry] [ISO 105 X12]
  9. BMW 3.3.4 Surface Resistance [DIN 345 T6]
  10. BMW 3.3.5 Rotting Resistance [VDA 270]
  11. BMW 3.3.6 Odor Test [VDA 270]
  12. BMW 3.3.8 Accelerated Soiling after vacuuming and cleaning [PR121.2]
  13. BMW 3.5.1 Total Thickness [ISO 1765]
  14. BMW 3.5.2 Total Weight [ISO 8543]
  15. BMW 3.5.3 Tensile Strength [ISO 13 934 T1] BMW 3.5.4 Elongation
  16. BMW 3.5.6 Dimensional Stability [ISO 13 934 T1]
  17. BMW 6951 680.6 Dimensional Stability
  18. BMW 3.2.4.3 Pile Weight
  19. BMW PR 303 : 4 [Additional Mats] BMW Environmental
  20. BMW PR 303 : 4 BMW Environmental
  21. CHRYSLER MS JB 2000[ASTM D2261] Tearing Strength
  22. CHRYSLER MS JB2000 [SAE J883] Shrinkage
  23. CHRYSLER 463-11-01C Cold Cracking463LB-11-0C
  24. CHRYSLER 463LB-11-01B
  25. CHRYSLER 463LB-12-01 Humidity / Hot / Cold Cycling
  26. CHRYSLER Breakstrength MS-JB 2000 [ASTM D5034]
  27. CHRYSLER Cold Cracking 463LB-11-01C
  28. CHRYSLER Heat Aging [463LB-13-01]
  29. CHRYSLER Humidity / Hot / Cold Cycling 463LB-12-01
  30. CHRYSLER LP 463KB-21-01 Resistance to Bearding & Fuzzing
  31. CHRYSLER LP 463LB-10-01 Bond Strength Original, Heat Aged, After Cycling
  32. CHRYSLER LP-463KB-22-01 Tuft Lock
  33. CHRYSLER LP-463KB-34-01 CHRYSLER Antimicrobial Milk Test
  34. CHRYSLER LP-463KB-37-02 CHRYSLER Stain Release Test
  35. CHRYSLER LP-463KC-01-01B Resistance to Dye Transfer
  36. CHRYSLER LP-463KC-019 Resistance to Soiling
  37. CHRYSLER LP-463KC-03-01B Water Spotting
  38. CHRYSLER LP-463KC-04-01-2A Staining
  39. CHRYSLER LP-463KC-04-01-2B Grease Cleanability
  40. CHRYSLER LP-463-KC-04-01A Cleanability and Soil Resistance
  41. CHRYSLER LP-463KC-04-02 CHRYSLER Soiling Test 4.3.2 Method 2 Hexapod
  42. CHRYSLER LP-463LB-12-01B Resistance to Humidity [Hot and Cold Cycles]
  43. CHRYSLER LP-463LB-13-01 Resistance to Heat Aging
  44. CHRYSLER LP-463PB Staining
  45. CHRYSLER LP-46FB-37-03 CHRYSLER Repellency Test
  46. CHRYSLER MS JAB 2000 [SAE J1351] Wet / Dry Odor
  47. CHRYSLER MS JB2000 MS-JP-1-3 Salt Solution
  48. CHRYSLER Pliability 463LB-11-01B
  49. CHRYSLER SAE J1530 MSS JB2000 Resistance to Bearding
  50. CHRYSLER463LB-13-01 Heat Aging
  51. M0135 1-11-2 Colorfastness to Light / Nissan Method
  52. DIN 53 121 Bending Stiffness
  53. DIN 53-109 Abrasion Resistance w / measurement and color change
  54. DIN 53377 Dimensional Stability
  55. DIN 53855-3 Total Thickness
  56. DIN 53855-3 Total Thickness Including Filament Tie Up
  57. DIN 54316 Imprinting Behavior / Visibility of Impression
  58. DIN 54318 Dimensional Stability
  59. DIN 54325 Pile Layer Weight / Face Weight
  60. DIN 54325 Pile Yarn Thickness
  61. DIN 54345 TI Surface Resistance
  62. DIN 75-202 Colorfastness to Light
  63. DIN EN 12127 Total Weight Including Filament Tie Up
  64. DIN EN 12127 Total Weight / Unit [Including all layers]
  65. DIN EN 150 105-B06 Colorfastness to Light
  66. DIN EN 20105-A02 Change in color before Aging According to Gray Scale
  67. DIN EN 20105-A02 / PR 121.1 Dirt Sensitivity / Visual Assessment
  68. DIN EN 29073-1 Primary Backing Fleece
  69. DIN EN 29073-1 Weight / Unit Area
  70. DIN EN 388 Puncture Resistance
  71. DIN EN 53855-3 Total Thickness Including All Layers
  72. DIN EN ISO 105X12
  73. DIN EN ISO 13 934-1 Breaking Force
  74. DIN EN12127 Total Weight per Unit
  75. DIN EN29073 Weight per Unit Area
  76. DIN EN53855-3 Total Thickness including All layers
  77. FLTM BN 113-01 Cycled Bond Strength
  78. FLTM BN 113-01 Original Bond Strength
  79. FLTM BN 113-01 Steamed Bond Strength
  80. FLTM BN 113-01 Wet Bond Strength
  81. FLTM BO 131-01 / SAE J1351 Odor Assessment
  82. FLTM BN108
  83. FMVSS 302 Automotive Flammability
  84. FMVSS 302 Automotive Flammability [Single Burn]
  85. DIN 75201A Fogging Characteristics
  86. G-Force Test [On / Off Durability]
  87. GM 7457 Automotive Battery
  88. GM 3028 Abrasion Resistance
  89. GM 9070P Flammability [As Received]
  90. GM 9070P Flammability with Aging
  91. GM 9126P Cleanability
  92. GM 91433P Resistance to Water Spotting and Salt Staining
  93. GM 9771P Fiber Degradation
  94. GM Physical Certification Battery
  95. GM2715M Abrasion resistance [<5,000 cycles w / weight lo
  96. GMW 3026 3.2.7 Loop Pile Pullout 5d
  97. GMW 3026 3.2.8 Abrasion Resistance 5d
  98. GMW 3026 3.3.6 Water Spotting / Colorfastness to Water 8d
  99. GMW 14124 Cycle M Environmental Shrinkage
  100. GMW 3026 3.2.1 Weight 3d
  101. GMW 3026 3.2.11 Mildew 15d
  102. GMW 3026 3.2.4 Breaking Load 5d
  103. GMW 3026 3.2.10 Odor 8d
  104. GMW 3026 3.2.12 Fogging 10d
  105. GMW 3026 3.2.13 Flammability-As Received and after Aging 13d
  106. GMW 3026 3.2.14 Dimensional Stability 8d
  107. GMW 3026 3.2.2 Pile Height 3d
  108. GMW 3026 3.2.3 Thickness 3d
  109. GMW 3026 3.2.5 Trouser Tear Strength
  110. GMW 3026 3.2.6 Resistance to Cracking from Bending at Cols Temp.
  111. GMW 3026 3.2.9 Stability of Materials against Mechanical Load 5d
  112. GMW 3026 3.3.1 Colorfastness to Artificial Light 24d [up to 5 colors]
  113. GMW 3026 3.3.3 Fiber Degradation 15d
  114. GMW 3026 3.3.4 Dye Migration 8d
  115. GMW 3026 3.3.5 Color Crock 5d
  116. GMW 3026 3.3.7 Cleanability and Soil Resistance 10d
  117. GMW 3026 Automotive Battery
  118. GMW 3026 Colorfastness to Light 3.3
  119. GMW 3232 Flammability with Aging
  120. GMW 8081 Static Head space GCMS for Interior Materials
  121. GMW3232 Automotive Flammability [Individual Burns]
  122. Grommet Strength
  123. Heat Resistance
  124. HES 6506 5.11.2 Crocking
  125. HES C210-00 4.16 Odor Property
  126. HES D6003-99 Flammability [100 hours at 80 C]
  127. HES D6003-99 Flammability [50 hours at 80 C]
  128. HES D6003-99 Flammability [No Aging]
  129. HES D6003-99 Flammability [Preconditioning Aging]
  130. HES D6057-00 4.17 Wet Heat Aging
  131. HES D6057-00 4.18 Heat Resistance
  132. HES D6506 5.8 Flexibility
  133. HES D6506 Tuft Bind
  134. HES D6506-00 5.11.1 Colorfastness to Washing
  135. HES D6507 5.11.1 Colorfastness to Washing
  136. HES D6507 Abrasion
  137. HES D6507 Resistance to Light
  138. HES D6507-00 4.18 Heat Resistance
  139. HES D6508 HONDA Haze Fogging Test
  140. HES D6601 Colorfastness to Light
  141. HES Peeling
  142. HES Water Resistance
  143. Hexapod Feet 8 sets of replacement hexapod polyurethane studs
  144. HONDA Breaking Strength
  145. HONDA Peel Strength
  146. HONDA Procedure Delamination
  147. HONDA Shoe Wear Resistance Test
  148. HONDA SW6 Pile Draw Out Strength
  149. Hyundai Colorfastness to Light
  150. JAGUAR : AN101-01Bleed
  151. JAGUAR : FLTMBN-105-01
  152. JAGUAR : FLTMBN-105-03
  153. JAGUAR : FLTMBN-105Wt
  154. JAGUAR : FLTMBN-106-01
  155. JAGUAR : FLTMBN107-01
  156. JAGUAR : FLTMBN-112-08
  157. JAGUAR : ISO 105-A02
  158. JAGUAR : JNS30.21.07Dr
  159. JAGUAR : JNS30.21.07Wt
  160. LEXUS 7.1 Mass
  161. LEXUS 7.10 Flammability [as received and after aging]
  162. LEXUS 7.12 Odor Analysis [wet and Dry]
  163. LEXUS 7.13 Crocking Method A & B
  164. LEXUS 7.16 Colorfastness to Light and Light Aging
  165. LEXUS 7.2 Thickness
  166. LEXUS 7.3 Tensile Strength [Warp & Weft]
  167. LEXUS 7.4 Tear Strength [Warp Weft]
  168. LEXUS 7.5.1 & 7.5.2 Abrasion Stringiness and Tear and Loss
  169. LEXUS 7.6 Heat Shrinkage
  170. LEXUS 7.7 Rigidity
  171. LEXUS 7.8 Tensile Strength After Heating [Warp & Weft]
  172. LEXUS 7.9 Change in Length between gages [warp & weft]
  173. LF 475a : Dimensional Stability
  174. Lightfastness
  175. Low Temperature Resistance
  176. Mat Movement
  177. MES MN 405 Section 7.7 Constant Load Elongation
  178. MES MN 405 7.12 Pile Draw Out Strength
  179. MES MN 405 7.15 Pilling & Fuzzing
  180. MES MN 405 7.21 Colorfastness to Rubbing
  181. MES MN 405 7.22 Colorfastness to Wash
  182. MES MN 405 7.23.1 Method A-B Colorfastness to Light
  183. MES MN 405 7.25 Colorfastness to Heat
  184. MES MN 405 7.29 Heat Aging of Backing Material
  185. MES MN 405 7.30 Loss of Heating
  186. MES MN 405 7.31 Stickiness
  187. MES MN 405 7.38 Mildew
  188. MES MN 405 7.5.1 Tensile & Elongation [Strip Method]
  189. MES MN 405 7.6.1 Tear Strength Method A
  190. MES MN 405 Abrasion Resistance Method B-a
  191. Puncture Resistance
  192. Mitsubishi EX 60410 Flammability
  193. MOBIS Battery of Tests
  194. MS 210-05 4.3 Heat Cycle Resistance
  195. MS 210-05 Fading Resistance Test
  196. MS 300-08 Flammability 10 burns [aged]
  197. MS 300-08 Flammability 10 burns [as received]
  198. MS 300-08 Flammability Aging
  199. MS 300-34 Odor Evaluation
  200. MS 300-35 Section 4.7 Tuft Lock
  201. MS 300-35 Section 4.9 Tabor Resistance
  202. NES 7105.11 Cold Resistance
  203. NES M0076 Colorfastness to Rubbing
  204. NES M0076 Colorfastness to Water
  205. NES M0076 Electrostatic Characteristics Section 18
  206. NES M0076 Tear Strength
  207. NES M0076 Tensile Strength
  208. NES M0076 Yellowing by Nitrogen Oxides Section 17B
  209. NES M0076.12 Breaking Strength and Elongation
  210. NES M0076.14 Tuft Bind
  211. NES M0076.16 Abrasion Resistance
  212. NES M0076.21 Resistance to Light
  213. NES M0076.21 Resistance To Light Additional Sample
  214. NES M0076.25 Thermal Cycle Test
  215. NES M0076.27 High Temperature Heat Resistance
  216. NES M0076.32 Water Repellence
  217. NES M0076.34 Odor Test
  218. NES M0133 Method 2 Chemical Resistance [
  219. NES M0135 Resistance to Light
  220. NES M0135 Resistance to Light at 25 mJ
  221. NES M7105 Chemical Resistance
  222. Odor Analysis GME 60-276
  223. FLTM BP 101-01, Procedure A Ozone Resistance
  224. PPS 2004 Heat Resistance
  225. PPS 1001 Corrosion Resistance
  226. PPS 2014 Weathering
  227. pps 6006 Method A Forward and Reverse Drag Test Method
  228. PR 380 2.2.5 Adhesion Force
  229. Resistance to Salt Staining
  230. Resistance to Staining-Water
  231. SAAB UV Aging : SAAB TESTING
  232. SAAB 1060 : SAAB TESTING
  233. SAAB 1078 : SAAB TESTING
  234. SAAB 211-1 : SAAB TESTING
  235. SAAB 211-2 : SAAB TESTING
  236. SAAB 232 : SAAB TESTING
  237. SAAB 3159 : SAAB TESTING
  238. SAAB 3965 : SAAB TESTING
  239. SAAB 3967 : SAAB TESTING
  240. SAAB 418 : SAAB TESTING
  241. SaabMoisAg : SAAB TESTING
  242. SAAB1075 : SAAB TESTING
  243. SAAB1076 : SAAB TESTING
  244. SAAB1077 : SAAB TESTING
  245. SAAB1080 : SAAB TESTING
  246. SAAB205 : SAAB TESTING
  247. SAAB220 : SAAB TESTING
  248. SAAB222 : SAAB TESTING
  249. SAAB3770-HA : SAAB TESTING
  250. SAAB3770-HR : SAAB TESTING
  251. SAAB3770-M : SAAB TESTING
  252. SAE J1351 Odor Analysis
  253. SAE J1530 Resistance to Bearding and Fuzzing
  254. SAE J1530 Wear Resistance
  255. SAE J1861
  256. SAE J1885 Colorfastness to Light
  257. SAE J1885[add]
  258. SAE J1960 Colorfastness to Light [1140 kj]
  259. SAE J200 Tear Strength
  260. SAE J2212 Colorfastness to Light
  261. SAE J323
  262. SAE J369 Flammability
  263. SAE J369 Flammability [As Received]
  264. SAE J369 Flammability [Steam Aging]
  265. SAE J681 Colorfastness to Rubbing
  266. SAE J883 Dimensional Stability
  267. SAE J860
  268. SAE J861
  269. TOYOTA Procedure Abrasion Resistance of Textile Fabrics Method 4.6
  270. TOYOTA Procedure Abrasion Resistance of Textile Fabrics Method 4.6
  271. TOYOTA Procedure Aging by Moisture and Heating 4.8
  272. TOYOTA Procedure Automotive Flammability
  273. TOYOTA Procedure Cold Flexibility 4.11
  274. TOYOTA Procedure Colorfastness to Light 4.7.2
  275. TOYOTA Procedure Colorfastness to Rubbing 4.7.1
  276. TOYOTA Procedure Compression & Recovery 4.1
  277. TOYOTA Procedure Odor Evaluation 4.10
  278. TOYOTA Procedure Pile Weight
  279. TOYOTA Procedure PPS 1012 Odor Evaluation
  280. TOYOTA Procedure PPS 2023 Resistance to Staining
  281. TOYOTA Procedure PPS 4012 Taber Resistance [<5,000 cycles]
  282. TOYOTA Procedure PPS 4014 Taber Abrasion
  283. TOYOTA Procedure PPS 4015 Colorfastness to Crocking
  284. TOYOTA Procedure PPS 4015 Colorfastness to Crocking
  285. TOYOTA Procedure PPS 4015 Colorfastness to Laundering
  286. TOYOTA Procedure PPS 4015 Colorfastness to Water
  287. TOYOTA Procedure PPS 4015 Laundering
  288. TOYOTA Procedure PPS 4015 Lightfastness
  289. TOYOTA Procedure PPS 4015[B] Colorfastness to Water
  290. TOYOTA Procedure PPS 5001 Tensile Strength & Elongation
  291. TOYOTA Procedure PPS 5001 Tensile Strength & Elongation Aging / Conditioning
  292. TOYOTA Procedure PPS 5003 Tear Strength
  293. TOYOTA Procedure PPS 5006 Tuft Lock
  294. TOYOTA Procedure PPS 5010 Flammability
  295. TOYOTA Procedure PPS 5011 Floor Mat Bend Test
  296. TOYOTA Procedure PPS 5017 Water Penetration
  297. TOYOTA Procedure PPS 5018 Adhesion to Flexible Substrate
  298. TOYOTA Procedure PPS 6006 Forward & Reverse Drag Test Method B
  299. TOYOTA Procedure PPS 6006 Method A : Rotation Drag Test
  300. TOYOTA Procedure Shrinkage Test 4.9
  301. TOYOTA Procedure Tearing Strength 4.4
  302. TOYOTA Procedure Tensile Strength 4.2
  303. TOYOTA Procedure Tensile Strength 4.3 [wet]
  304. TOYOTA Procedure Tuft Bind of Pile Floor Coverings 4.5.1
  305. TOYOTA Procedure Tuft Bind of Pile Floor Coverings 4.5.2 [wet]
  306. TOYOTA Procedure Tuft Bind Of Pile Floor Coverings 4.5.3 [wet and dried]
  307. TOYOTA Procedure Yellow Discoloration 4.13
  308. TOYOTA TSL3600G-1 Carpet Materials Battery
  309. TSL 3600G TOYOTA Section 7.15 [A] and [B] Colorfastness to Light
  310. VDA 270 C3 Odor Testing
  311. VDA 270 Rotting Resistance

AUTOMOTIVE – 자동차부품 관련 시험   [ 1 ]   [ 2 ]

Company Info :

퍼포먼스네트워크(주)

강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
Tel : 02-980-9800(대표전화)
E-Mail: info @ anytest.co.kr (Technical,시험인증)

ALT_TEXT
QR Code Generator
  • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

    [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

  • MIL-Spec Documents2013년 December 11일 - 6:40 pm

    MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

  • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

    아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

  • IP Code2016년 April 12일 - 6:42 pm

    IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

  • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

    ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

November 2024
M T W T F S S
« Aug    
 123
45678910
11121314151617
18192021222324
252627282930  
© Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.