ASTM/UOP XXXX

  • ASTM/UOP114-86 : Relative Density of Gas by Schilling Effusion Method
  • ASTM/UOP144-88 : Copper in Gasoline and Naphtha
  • ASTM/UOP163-05 : Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration
  • ASTM/UOP172-89 : Flue Gas Analysis
  • ASTM/UOP174-84 : Storage Stability of Residual Fuel Oils
  • ASTM/UOP1-87 : Distillation Range of Heavy Petroleum Oils and Determination of Coke Residue
  • ASTM/UOP197-89 : Mercaptan Sulfur – Copper Number
  • ASTM/UOP202-00 : Disulfide Sulfur in Light Petroleum Distillates and LPG
  • ASTM/UOP209-00 : Alkalinity, Sulfide and Mercaptide Analyses of Used Refinery Caustic Solutions
  • ASTM/UOP210-76T : Caustic Solution Analysis – Double Indicator
  • ASTM/UOP211-79 : Caustic Solutions Analysis – Liberation Method
  • ASTM/UOP212-05 : Hydrogen Sulfide, Mercaptan Sulfur, and Carbonyl Sulfide in Hydrocarbon Gases by Potentiometric Titration
  • ASTM/UOP248-92 : Alkalinity and Fluoride in Alkaline Solutions
  • ASTM/UOP254-87 : Apparent Bulk Density of Fluid Cracking Catalyst
  • ASTM/UOP262-99 : Phenols and Thiophenols in Petroleum Products by Spectrophotometry
  • ASTM/UOP269-90 : Nitrogen Bases in Hydrocarbons by Potentiometric Titration
  • ASTM/UOP274-94 : Platinum in Fresh Catalysts by Spectrophotometry
  • ASTM/UOP276-85 : Pyrrole Nitrogen in Petroleum Distillates by Visible Spectrophotometry
  • ASTM/UOP286-89 : Free Sulfur in Distillates by Mercury Number
  • ASTM/UOP291-02 : Total Chloride in Alumina and Silica-Alumina Catalysts by Potentiometric Titration
  • ASTM/UOP294-93 : Apparent Bulk Density of Catalyst Particles
  • ASTM/UOP296-82 : Arsenic in Petroleum Naphthas
  • ASTM/UOP300-61 : Water in Glycol
  • ASTM/UOP303-05 : Impurities in Catalysts by ICP-OES
  • ASTM/UOP304-90 : Bromine Number and Bromine Index of Hydrocarbons by Potentiometric Titration
  • ASTM/UOP311-02 : Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA)
  • ASTM/UOP313-89 : Nitrogen Bases in Petroleum Distillates by Color Indicator Titration
  • ASTM/UOP314-97 : Analysis of Refinery Waters for pH, Iron and Copper
  • ASTM/UOP315-59 : Basic Nitrogen in Gases by Low Temperature Acid Scrubbing
  • ASTM/UOP317-66T : Chlorine in Hydrogen Gas by a Colorimetric Procedure
  • ASTM/UOP320-86 : Sulfate in Alumina or Silica-Alumina Base Catalysts-Turbidimetric Method
  • ASTM/UOP326-82 : Diene Value by Maleic Anhydride Addition Reaction
  • ASTM/UOP333-89 : Fines in 1.6-mm (1/16-Inch) Spherical Catalysts and Bases by Sieve Analysis
  • ASTM/UOP33-82 : Peroxide in Gasoline
  • ASTM/UOP344-87 : Moisture in Hydrocarbon Streams Using an On-Line Analyzer
  • ASTM/UOP350-82 : Trace Concentrations of Lead in Gasoline or Petroleum Naphthas
  • ASTM/UOP357-80 : Trace Sulfur in Petroleum Distillates by the Nickel Reduction Method
  • ASTM/UOP358-64 : Bromine Index of Liquid Butane and Petroleum Distillates by Coulometric Titration
  • ASTM/UOP364-85 : Trace Dissolved Oxygen in Liquids
  • ASTM/UOP373-08 : Composition of C2 Through C5 Hydrocarbon Gas Mixtures by Gas Chromatography
  • ASTM/UOP373-83 : Composition of C2 Through C5 Hydrocarbon Gas Mixtures by Gas Chromatography
  • ASTM/UOP374-90 : p-Phenylenediamine Type Inhibitors in Gasoline
  • ASTM/UOP375-86 : Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oils
  • ASTM/UOP377-90 : Free Sulfur in LPG by Mercury Number
  • ASTM/UOP379-81 : Hydrogen Fluoride in HF Alkylation Regenerator Bottoms
  • ASTM/UOP381-63 : Traces of Sulfur in Liquefied Petroleum Gases by the Nickel Reduction Method
  • ASTM/UOP382-81 : Water in Regenerator Bottoms from Hydrogen Fluoride Alkylation
  • ASTM/UOP384-76 : Nitrogen in Petroleum Distillates and Heavy Oils by Acid Extraction or Direct Kjeldahl Procedure
  • ASTM/UOP387-62 : Arsenic in Petroleum Stocks and Catalysts by Spectrophotometry
  • ASTM/UOP389-04 : Trace Metals in Oils by Wet Ashing and ICP-OES
  • ASTM/UOP391-91 : Trace Metals in Petroleum Products or Organics by AAS
  • ASTM/UOP395-95 : Total Chloride in Petroleum Distillates by Colorimetry
  • ASTM/UOP405-67T : Hydrogen Chloride in Gas Streams by Potentiometric Titration
  • ASTM/UOP410-85 : Sodium in Catalysts by Flame Emission or Atomic Absorption Spectrophotometry
  • ASTM/UOP411-92 : Normal Paraffins by Subtractive Gas Chromatography
  • ASTM/UOP413-82 : One Day Fuel Oil Stability
  • ASTM/UOP41-74 : Doctor Test for Petroleum Distillates
  • ASTM/UOP422-66 : Particle Size Distribution by Micromesh Sieves
  • ASTM/UOP423-85 : Thiosulfate in Used Refinery Caustic
  • ASTM/UOP425-86 : Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
  • ASTM/UOP430-70T : Basic Nitrogen in Gases by Acid Scrubbing
  • ASTM/UOP432-65T : Total Nitrogen in Liquefied Petroleum Gases by Acid Extraction-Kjeldahl Procedure
  • ASTM/UOP434-83 : Free Water and Volatile Hydrocarbon Content of Molecular Sieves
  • ASTM/UOP436-87 : Silica in Catalysts by Gravimetric Procedure
  • ASTM/UOP437-81 : Size Distribution of Molecular Sieve Particles
  • ASTM/UOP438-81 : Attrition of Molecular Sieve Particles
  • ASTM/UOP456-80 : Chlorides in Refinery Waters
  • ASTM/UOP464-00 : Phenol in Light Aromatic Hydrocarbons and Cyclohexane by Spectrophotometry
  • ASTM/UOP46-85 : Paraffin Wax Content of Petroleum Oils and Asphalts
  • ASTM/UOP481-91 : Water in Liquid Hydrocarbons by Coulometry
  • ASTM/UOP495-03 : Aromatics in Molex Process n-Paraffin Products by Ultraviolet Spectrophotometry
  • ASTM/UOP496-63T : Carbonyl Compounds in Light Hydrocarbon Gases
  • ASTM/UOP501-02 : Hydrocarbon Types by Fluorescent Indicator Adsorption (FIA) at Elevated Temperatures
  • ASTM/UOP515-68T : Residue and Organic Residue in Waste Waters
  • ASTM/UOP516-00 : Sampling and Handling of Gasolines, Distillate Fuels and C3-C4 Fractions
  • ASTM/UOP523-96 : Glycol and Carom Solvent Distribution in Mixtures by GC
  • ASTM/UOP537-91 : Alcohol and Ketone Mixtures by GC
  • ASTM/UOP539-97 : Refinery Gas Analysis by Gas Chromatography
  • ASTM/UOP542-88 : Trace Diolefins, Acetlyenes and Non-Condensable Hydrocarbons in LPG by GC
  • ASTM/UOP543-97 : Trace Non-Aromatic Hydrocarbons in High-Purity Aromatics by Gas Chromatography
  • ASTM/UOP547-97 : Laboratory Hydrogen Sulfide and Mercaptan Extraction
  • ASTM/UOP549-81 : Sodium in Petroleum Distillates by Flame Emission, Using an Atomic Absorption Spectrophotometer
  • ASTM/UOP551-86 : Hexanes and Lower Boiling Hydrocarbons in Olefin Free Gasolines by GC
  • ASTM/UOP555-96 : Trace Impurities in High-Purity Benzene and Cyclohexane by GC
  • ASTM/UOP563-90 : Packed Apparent Bulk Density of Molecular Sieves
  • ASTM/UOP565-05 : Acid Number and Naphthenic Acids by Titration
  • ASTM/UOP569-79 : Methanol in Petroleum Distillates and LPG by Gas Chromatography
  • ASTM/UOP578-02 : Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
  • ASTM/UOP586-71 : Sulfur in Hydrocarbons by Oxy – Hydrogen Combustion
  • ASTM/UOP587-92 : Acid Number and Naphthenic Acids by Colorimetric Titration
  • ASTM/UOP588-94 : Total, Inorganic and Organic Chloride in Hydrocarbons by Potentiometric Titration
  • ASTM/UOP592-85 : Palladium in Catalysts by Visible Spectrophotometry
  • ASTM/UOP602-89 : Soxhlet Extraction of Catalyst
  • ASTM/UOP603-13 : Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by GC
  • ASTM/UOP603-88 : Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by GC
  • ASTM/UOP606-78 : Chloride in Hydrocarbons by Oxy-Hydrogen Combustion
  • ASTM/UOP614-02 : Heptane-Insoluble Matter in Petroleum Oils Using a Membrane Filter
  • ASTM/UOP619-83 : Fluorine in Hydrocarbons by Oxy-Hydrogen Combustion
  • ASTM/UOP621-98 : Boiling Point Distribution of Hydrocarbons by Gas Chromatography
  • ASTM/UOP624-94 : Carbonyl Number by Chemical Analysis
  • ASTM/UOP629-90 : Analysis of Hydrogen Fluoride Alkylation Catalysts and Regenerator Bottoms
  • ASTM/UOP649-74 : Total Oxygen in Organic Materials by Pyrolysis-Gas Chromatographic Technique
  • ASTM/UOP666-82 : Precision Statements in ASTM/UOP Methods
  • ASTM/UOP670-68 : Carbon Structure of C7 and Lower Boiling Hydrocarbons in Olefinic Samples by Hydrogenation and Capillary Column Gas Chromatography
  • ASTM/UOP672-84 : Aromatic Hydrocarbon Types in Detergent Alkylates Using Low Voltage Mass Spectrometry
  • ASTM/UOP673-06 : Linear Alkylbenzene Isomer Distribution in Detergent Alkylate by GC
  • ASTM/UOP676-84 : Molecular Weight by Vapor Pressure Osmometry
  • ASTM/UOP678-04 : Dissolved Molecular Oxygen in Liquid Hydrocarbons by Electrochemical Detection
  • ASTM/UOP6-82 : Induction Period of Gasolines Using the UOP Oxygen Pressure Vessel
  • ASTM/UOP682-84 : Total Cyanide in Refinery Waters by Visible Spectrophotometry
  • ASTM/UOP683-86 : Sulfide in Refinery Waste Water
  • ASTM/UOP688-92 : Normal Olefins and Normal Paraffins by Gas Chromatography
  • ASTM/UOP690-99 : Octanes and Lower Boiling Hydrocarbons in Olefin-Free Gasolines by GC
  • ASTM/UOP699-91 : Sodium in Liquefied Petroleum Gas by AAS
  • ASTM/UOP700-70 : Free Sulfur In Petroleum Distillates and LPG by the AC Polarograph
  • ASTM/UOP702-90 : Impurities in Distilled High Purity Cumene by GC
  • ASTM/UOP703-98 : Carbon on Catalysts by Induction Furnance Combustion and Infrared Detection
  • ASTM/UOP704-70 : Equivalent Weights of Heavy Organic Amines By Non-Aqueous Potentiometric Titration
  • ASTM/UOP709-70 : Gas Analysis by Gas Chromatography Using a Two – Injection Technique
  • ASTM/UOP714-87 : Metals in Miscellaneous Samples by ICP-AES
  • ASTM/UOP715-85 : Rhenium Catalysts by Spectrophotometry
  • ASTM/UOP720-08 : Impurities in, and Purity of, High Purity p-Xylene by GC
  • ASTM/UOP720-93 : Impurities in High Purity p-Xylene by GC
  • ASTM/UOP725-86 : Pentenes and Lower Boiling Hydrocarbons in Olefinic Gasolines by GC
  • ASTM/UOP727-72 : Total Sulfur in Naphthas and Petroleum Distillates by Oxidative Pyrolysis and Microcoulometric Titration
  • ASTM/UOP729-76T : Phenols in Light Distillates by Direct Titration
  • ASTM/UOP731-74 : Total Sulfur in Heavy Oils, Tars and Solids by Microcoulometric Titration, Single Entry Boat Technique
  • ASTM/UOP735-73 : Hydrogen Content of Gases by Gas Chromatography
  • ASTM/UOP740-79T : Volatile Nitrogen Bases, Including Ammonia in Solids and Aqueous Solutions
  • ASTM/UOP741-86 : Paraffin and Naphthene Distribution by Carbon Number of SaturatedPetroleum Distillates by GC
  • ASTM/UOP742-86 : Sulfate in Catalyst by a Gravimetric Method
  • ASTM/UOP743-73T : Acid Oils in Refinery Caustic by Liberation
  • ASTM/UOP744-04 : Aromatics in Hydrocarbons by Gas Chromatography
  • ASTM/UOP755-92 : Trace Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • ASTM/UOP759-76 : Trace Oxygen in Gases by Gas Chromatography
  • ASTM/UOP762-76 : Apparent Bulk Density of Solid Phosphoric Acid Catalyst
  • ASTM/UOP766-91 : Piece Density by Mercury Displacement
  • ASTM/UOP772-77 : Mercaptan Sulfur in LPG by Microcoulometry
  • ASTM/UOP77-85 : Crude Oil Evaluation by Hempel Distillation
  • ASTM/UOP778-81 : Apparent Bulk Density of Extruded Catalyst
  • ASTM/UOP779-92 : Chloride in Petroleum Distillates by Microcoulometry
  • ASTM/UOP780-92 : Carbohydrates by HPLC
  • ASTM/UOP787-78 : Silicones in Petroleum Distillates by Atomic Absorption Spectrophotometry
  • ASTM/UOP791-94 : Sulfur Components in LPG or C5 Minus Hydrocarbon Fractions by GC-SCD
  • ASTM/UOP792-78 : The Colorimetric Determination of Silica in Aqueous Solutions
  • ASTM/UOP793-82 : Color Stability of Petroleum Distillates
  • ASTM/UOP79-87 : Fractionation of Petroleum Distillates
  • ASTM/UOP798-96 : Trace p-DEB or Indian in C8 Aromatics and Trace C8 Aromatics in p-DEB by GC
  • ASTM/UOP800-79 : Vanadium, Nickel and Iron in Petroleum Oils by Atomic Absorption Spectrophotometry
  • ASTM/UOP801-80 : Size Distribution of Charcoal Particles
  • ASTM/UOP802-80 : Attrition of Charcoal Particles
  • ASTM/UOP803-84 : Chlorination Color of Phenol by Spectrophotometry
  • ASTM/UOP804-83 : Carbonyl Content of Phenol by Visible Spectrophotometry
  • ASTM/UOP806-84 : Alcohol Impurities in Acetone
  • ASTM/UOP808-84 : Alkalinity of Acetone
  • ASTM/UOP809-84 : Acidity of Acetone
  • ASTM/UOP810-84 : Residue on Evaporation of Acetone
  • ASTM/UOP815-87 : Acid Insolubles in Catalysts
  • ASTM/UOP816-80 : Refractive Index of Hydrocarbon Liquids
  • ASTM/UOP818-81 : Thiosulfate in Lean Amine Solutions
  • ASTM/UOP821-81 : Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer
  • ASTM/UOP822-81 : Specific Gravity of Coke and Powdered Asphalts
  • ASTM/UOP823-90 : Platinum in Fresh Platinum-Rhenium Catalysts by Spectrophotometry
  • ASTM/UOP824-81 : Diethanolamine in Solution by Color Indicator Titration
  • ASTM/UOP825-81 : Monoethanolamine in Solutions by Color Indicator Titration
  • ASTM/UOP826-81 : Carbon Dioxide in Amine Solution
  • ASTM/UOP827-81 : Apparent Hydrogen Sulfide in Amine Solutions
  • ASTM/UOP828-81 : Total Amine in Solutions
  • ASTM/UOP829-82 : Titrimatric Determination of CO2 in Ethanolamines
  • ASTM/UOP832-83 : Carbon Structure of C9 and Lower Boiling Hydrocarbons by Gas Chromatography
  • ASTM/UOP833-82 : Molybdenum in Platforming Catalysts and Fines by Atomic Absorption Spectrophotometry
  • ASTM/UOP834-82 : Arsine in Ethylene by Electrothermal Atomic Absorption Spectrophotometry
  • ASTM/UOP835-82 : Accelerated Fuel Oil Stability
  • ASTM/UOP836-82 : Sulfur in Distillate and Residual Oils by X-Ray Flourescence
  • ASTM/UOP841-83 : Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy
  • ASTM/UOP842-83 : Nickel, Iron, Sulfur and Vanadium in Distillate, Residual Oils and Pitches by XRF
  • ASTM/UOP845-90 : Trace Alcohols in LPG by GC
  • ASTM/UOP846-83 : Composition of C4 Olex Effluent by Gas Chromatography
  • ASTM/UOP847-86 : Dewaxing of Petroleum Products
  • ASTM/UOP848-84 : Nickel, Vanadium, Iron, Lead, Copper and Sodium in Gas Oils by AAS
  • ASTM/UOP851-84 : Density of Powders and Solids by Helium Displacement
  • ASTM/UOP854-85 : Size Distribution of Solid Phosphoric Acid Catalyst
  • ASTM/UOP856-85 : Particle Size Distribution of Powders by Laser Light Scattering
  • ASTM/UOP863-01 : Trace Desorbent in C10-C18 Molex Products by GC
  • ASTM/UOP864-89 : Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
  • ASTM/UOP865-86 : Phosphorus in Catalysts by Visible Spectrophotometry
  • ASTM/UOP866-86 : Carbon, Hydrogen and Nitrogen by Oxidative Pyrolysis
  • ASTM/UOP868-88 : Trace Saturates in High Purity Aromatics by GC
  • ASTM/UOP870-90 : Carbon Number Distribution of Paraffins, Naphthenes and Aromatics by GC
  • ASTM/UOP873-86 : Noble Metals and Modifiers in Catalysts by ICP-AES
  • ASTM/UOP874-88 : Pore Size Distribution of Porous Substnces by Nitrogen Adsoprtion Using a Quantachrome Analyzer
  • ASTM/UOP876-93 : Platinum in Chloroplatinic Acid by Spectrophotometry
  • ASTM/UOP878-87 : Potassium in Catalysts by Atomic Absorption
  • ASTM/UOP879-87 : Aluminum in Catalysts by Atomic Absorption
  • ASTM/UOP880-96 : Hydrocarbon Types in Low Olefin Distillates by GC
  • ASTM/UOP887-89 : Rhenium in Perrhenic Acid and Ammonium Perrhenate by Spectrophotometry
  • ASTM/UOP894-91 : Mercury in Catalysts by GF-AAS
  • ASTM/UOP896-93 : Platinum in Spent Catalyst
  • ASTM/UOP899-04 : Trace Hydrocarbons in Hydrogen or LPG by Gas Chromatography
  • ASTM/UOP905-91 : Platinum Agglomeration by X-Ray Diffraction
  • ASTM/UOP912-94 : Fluoride in Catalysts, Molecular Sieves and Aqueous Solutions by Ion Selective Electrode
  • ASTM/UOP913-92 : Impurities in Styrene by Gas Chromatography
  • ASTM/UOP914-92 : Automated Crush Strength of Catalysts or Molecular Sieves
  • ASTM/UOP915-92 : Normal Paraffins by Capillary Gas Chromatography
  • ASTM/UOP916-93 : Palladium, Gold and Potassium in Silica Catalyst by ICP-AES
  • ASTM/UOP917-93 : Palladium in Fresh and Spent Alumina Catalyst by Spectrophotometry
  • ASTM/UOP918-92 : Collection and Grinding of Adsorbents and Catalysts for Analysis
  • ASTM/UOP919-11 : Trace Hydrocarbons in Udex Solvent by GC
  • ASTM/UOP923-97 : Total Sulfur in LPG by Hydrogenolysis
  • ASTM/UOP924-00 : Nickel, Tungsten, Sodium and Aluminum in Hydrocracking Catalysts by ICP-AES
  • ASTM/UOP925-92 : Nickel, Molybdenum, Phosphorus, Cobalt and Aluminum in Fresh Catalysts by ICP-AES
  • ASTM/UOP926-92 : Aluminum and Silicon In Fresh Catalysts by Lithium Metaborate Fusion/ICP-AES
  • ASTM/UOP927-92 : Trace Metallic Impurities in Fresh Catalysts by ICP-AES
  • ASTM/UOP931-94 : Trace Impurities in Mixed Xylenes by Gas Chromatography
  • ASTM/UOP933-94 : Test Procedures for Plant Deposits, Scales and Sludges
  • ASTM/UOP934-94 : Diolefins in C5 Olefinic Hydrocarbon Streams by GC
  • ASTM/UOP935-94 : Mercaptain Types In Kerosine by NMR
  • ASTM/UOP936-95 : Combined Nitrogen in LPG by Chemiluminescence
  • ASTM/UOP938-00 : Total Mercury and Mercury Species in Liquid Hydrocarbons
  • ASTM/UOP939-96 : Basic Nitrogen in LPG by Ion Chromatography
  • ASTM/UOP944-96 : Surface Area of Fresh and Regenerated Catalyst
  • ASTM/UOP945-96 : Platinum Dispersion on Platinum or Platinum/Tin Catalyst by Hydrogen-Oxygen Titration
  • ASTM/UOP946-96 : Arsenic in Petroleum Naphthas by HG-AAS
  • ASTM/UOP947-96 : Length and Diameter of Extruded Catalyst Using a Semi-Automated Method
  • ASTM/UOP948-96 : Relative Density of Gas Mixtures by Calculation From Composition
  • ASTM/UOP952-97 : Trace Lead in Gasolines and Naphthas by GF-AAS
  • ASTM/UOP953-97 : Sulfate and Thiosulfate in Caustic Aqueous Solutions by Ion Chromatography
  • ASTM/UOP954-03 : Loss on Ignition (LOI) for Fresh, Regenerated, Used, and Spent Catalysts, Catalyst Supports, and Adsorbents
  • ASTM/UOP958-98 : Ammonia in Hydrocarbons
  • ASTM/UOP959-98 : Ammonium Determination in Aqueous Solutions by Ion Chromatography
  • ASTM/UOP961-98 : Elemental Composition of Zeolites by ICP-AES
  • ASTM/UOP962-98 : Copper in Gasoline and Naphtha by Flame-AAS or ICP-AES
  • ASTM/UOP963-98 : Trace Aromatic Hydrocarbons in 90 to 400°C Boiling Range Petroleum Distillates by HPLC
  • ASTM/UOP964-98 : Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
  • ASTM/UOP967-00 : Automated Crush Strength of Spherical Catalysts
  • ASTM/UOP968-00 : Foots Oil in Methyl Isobutyl Ketone by GC
  • ASTM/UOP969-00 : Permanganate Fading for Acetic Acid
  • ASTM/UOP971-00 : Trace Nitrogen in Light Aromatic Hydrocarbons by Chemiluminescence
  • ASTM/UOP972-01 : Aluminum, Silicon and Silver in Acetic Acid by ICP-OES
  • ASTM/UOP973-01 : Automated Crush Strength of Extruded Catalysts
  • ASTM/UOP975-02 : Fluorine in Liquid Hydrocarbons and LPG by Oxidative Combustion with Ion-Selective Electrode Detection
  • ASTM/UOP976-02 : Trace C4-C9 Saturates in High Purity Aromatics by GC
  • ASTM/UOP979-02 : Total Chloride in Alumina Supported Catalysts by Wavelength Dispersive X-Ray Fluorescence
  • ASTM/UOP979-14 : Total Chloride in Alumina Supported Catalysts by Wavelength Dispersive X-Ray Fluorescence
  • ASTM/UOP980-03 : C5 and Lower Boiling Dienes, Olefins, and Parafins in Naphthas by GC
  • ASTM/UOP983-04 : Acetylenes in 1,3-Butadiene by GC
  • ASTM/UOP9-85 : Hydrogen Sulfide in Gases by the Tutwiler Method
  • ASTM/UOP99-82 : Pentane-Insoluble Matter in Petroleum Oils Using a Membrane Filter
  • ASTM/UOP999-05 : Precision Statements in UOP Methods
  • 위 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집 규격번호와 제목을 발췌, 열거한 것입니다.[출처 : www.astm.org ]