You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM F 8XXX

ASTM F 8XXX

  • ASTM F800-89 : Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992)

  • ASTM F801 : Test Method for Measuring Optical Angular Deviation of Transparent Parts

  • ASTM F802 : Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction

  • ASTM F804-83(1990)E01 : Practice for Producing Spin Coating Resist Thickness Curves (Withdrawn 1997)

  • ASTM F805-83(1992)E01 : Test Method for Photoplate Surface Flatness by Inteferometric Non-Contact Technique (Withdrawn 1996)

  • ASTM F806 : Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials

  • ASTM F807 : Practice for Determining Resolution Capability of Office Copiers

  • ASTM F808-83(1988) : Guide for Collecting Skimmer Performance Data in Uncontrolled Environments (Withdrawn 1998)

  • ASTM F809/F809M-95e1 : Specification for Large Diameter Polybutylene Plastic Pipe (Withdrawn 2000)

  • ASTM F80-94 : Test Method for Crystallographic Perfection of Epitaxial Deposits of Silicon by Etching Techniques (Withdrawn 1998)

  • ASTM F809M-95 : Specification for Large Diameter Polybutylene Plastic Pipe (Metric) (Withdrawn 1998)

  • ASTM F81 : Test Method for Measuring Radial Resistivity Variation on Silicon Wafers (Withdrawn 2003) No Replacement

  • ASTM F810 : Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste DisposalAbsorption Fields

  • ASTM F81-01 : Test Method for Measuring Radial Resistivity Variation on Silicon Wafers (Withdrawn 2003)

  • ASTM F811 : Practice for Accelerometer Use in Vehicles for Tire Testing

  • ASTM F812/F812M : Specification for Surface Discontinuities of Nuts, Inch and Metric Series

  • ASTM F813 : Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices

  • ASTM F814-84B : Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications (Withdrawn 1995)

  • ASTM F815-88(1993)e1 : Test Method for Detection of Epitaxial Spikes (Withdrawn 1999)

  • ASTM F816 : Test Method for Combined Fine and Gross Leaks for Large Hybrid Microcircuit Packages

  • ASTM F817-83(1990) : Test Method for Characterization of Film Resistor Materials and Processes (Withdrawn 1996)

  • ASTM F818 : Terminology Relating to Spill Response Barriers

  • ASTM F819 : Terminology Relating to Electrical Protective Equipment for Workers

  • ASTM F821/F821M : Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

  • ASTM F821-95 : Specification for Doors and Frames, Steel, Interior, Marine (Replaced 2001)

  • ASTM F822 : Specification for Chest of Drawers (Chiffonier), Steel, Marine

  • ASTM F823 : Specification for Desk, Log, Marine, Steel, with Cabinet

  • ASTM F824 : Specification for Tables, Mess, Marine, Steel

  • ASTM F825 : Specification for Drawers, Furniture, Marine, Steel

  • ASTM F826 : Specification for Tops, Furniture, Marine, Steel

  • ASTM F82-67(1973) : Recommended Practice for Fast Quality Check on Immersion for Nonmetallic Gasket Materials (Withdrawn 1976)

  • ASTM F828-83 : Test Method for Radiant Heat Resistance of Aircraft Inflatable Evacuation Slide/Slide Raft Materials (Withdrawn 1995)

  • ASTM F829-83 : Test Method for Determining Protein Efficiency Ratio for Meat and Meat Products (Withdrawn 1991)

  • ASTM F83 : Practice for Definition and Determination of Thermionic Constants of Electron Emitters

  • ASTM F830-83 : Practice for Preparation of Meat (Withdrawn 1991)

  • ASTM F831-83 : Test Method for Determining Net Protein Ratio for Meat and Meat Products (Withdrawn 1991)

  • ASTM F832 : Classification for Security Seals

  • ASTM F833 : Consumer Safety Performance Specification for Carriages and Strollers

  • ASTM F834 : Consumer Safety Specification for Toy Chests

  • ASTM F835 : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F835M : Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

  • ASTM F836M : Specification for Style 1 Stainless Steel Metric Nuts

  • ASTM F837 : Specification for Stainless Steel Socket Head Cap Screws

  • ASTM F837M : Specification for Stainless Steel Socket Head Cap Screws [Metric]

  • ASTM F838 : Test Method for Determining Bacterial Retention of Membrane Filters Utilized for LiquidFiltration

  • ASTM F838-83(1993) : Test Method for Determining Bacterial Retention Of Membrane Filters Utilized For Liquid Filtration (Withdrawn 2002)

  • ASTM F839 : Specification for Cautionary Labeling of Portable Gasoline Containers for Consumer Use

  • ASTM F84 : Test Method for Measuring Resistivity of Silicon Wafers With an In Line Four Point Probe(Withdrawn 2003) No Replacement

  • ASTM F840 : Specification for Ladders, Fixed, Vertical, Steel, Ship’s

  • ASTM F84-02 : Test Method for Measuring Resistivity of Silicon Wafers With an In-Line Four-Point Probe (Withdrawn 2003)

  • ASTM F841 : Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

  • ASTM F842 : Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

  • ASTM F843 : Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in HotMelt Carbon Copy Paper Ink

  • ASTM F844 : Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

  • ASTM F845 : Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003) NoReplacement

  • ASTM F845-96 : Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003)

  • ASTM F846 : Guide for Testing Performance of Amusement Rides and Devices

  • ASTM F847 : Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal SiliconWafers by X Ray Techniques (Withdrawn 2003) No Replacement

  • ASTM F847-02 : Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques (Withdrawn 2003)

  • ASTM F848-83(1988) : Method for Determining the Lattice Constant of Single Crystal Gadolinium Gallium Garnet (Withdrawn 1992)

  • ASTM F849-83(1988) : Method for Identification and Test of Structures and Contaminants Seen on Polished Gadolinium Gallium Surfaces (Withdrawn 1992)

  • ASTM F85 : Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes

  • ASTM F850-83(1988) : Test Method for Crystallographic Perfection of Gadolinium Gallium Garnet by Preferential Etch Techniques (Withdrawn 1992)

  • ASTM F851 : Test Method for Self Rising Seat Mechanisms

  • ASTM F852 : Specification for Portable Gasoline Containers for Consumer Use

  • ASTM F853 : Practice for Maintenance Procedures for Amusement Rides and Devices

  • ASTM F854 : Test Method for Cleanliness of Carbon Paper

  • ASTM F855 : Specifications for Temporary Protective Grounds to Be Used on De energized Electric PowerLines and Equipment

  • ASTM F856 : Practice for Mechanical Symbols, Shipboard/Heating, Ventilation, and Air Conditioning(HVAC)

  • ASTM F859 : Specification for Heat Sanitizing Commercial Dishwashing Machines, Multiple Tank, ConveyorRack Type

  • ASTM F86 : Practice for Surface Preparation and Marking of Metallic Surgical Implants

  • ASTM F860 : Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type

  • ASTM F861 : Specification for Commercial Dishwashing Racks

  • ASTM F863-84(1992)E01 : Practice for Detection of Defects in Spin-Coated Resist (Withdrawn 1996)

  • ASTM F8-64 : Recommended Practice for Testing Electron Tube Materials Using Reference Triodes (Withdrawn 1973)

  • ASTM F864-84(1992) : Practice for Inspection of Hardsurface Glass Photoplates (Withdrawn 1996)

  • ASTM F865-84(1996) : Test Methods for Gross Camber of Ceramic Substrates for Thick Film Applications (Withdrawn 2001)

  • ASTM F866-84(1990)E01 : Test Method for Measuring the Package Attenuation Coefficient of a Sealed Device for Radioisotope Hermetic Test (Withdrawn 1996)

  • ASTM F867M-94A : Guide for Ionizing Radiation Effects (Total Dose) Testing of Semiconductor Devices [Metric] (Withdrawn 1998)

  • ASTM F868 : Classification for Laminated Composite Gasket Materials

  • ASTM F869 : Terminology Relating to Athletic Shoes and Biomechanics

  • ASTM F870 : Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and DimensionalMeasurements

  • ASTM F871M-98 : Specification for Electrodeposited Coatings on Threaded Components [Metric] (Withdrawn 2001)

  • ASTM F872-84(1990) : Specification for Filter Units, Air Conditioning : Viscous-Impingement Type, Cleanable (Withdrawn 1999)

  • ASTM F873 : Guide for Incinerating Oil Spill Wastes at Temporary Field Locations

  • ASTM F874 : Test Method for Temperature Measurement and Profiling for Microwave Susceptors

  • ASTM F875 : Test Method for Evaluation of Large Area Density and Background on Office Copiers

  • ASTM F876 : Specification for Crosslinked Polyethylene (PEX) Tubing

  • ASTM F87-68(1973) : Method of Test for Rate of Grease Penetration of Flexible Barrier Materials (Withdrawn 1980)

  • ASTM F878-95 : Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)

  • ASTM F879 : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

  • ASTM F879M : Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws[Metric]

  • ASTM F88 : Test Method for Seal Strength of Flexible Barrier Materials

  • ASTM F880 : Specification for Stainless Steel Socket Set Screws

  • ASTM F880M : Specification for Stainless Steel Socket Set Screws [Metric]

  • ASTM F881 : Specification for Silicone Elastomer Facial Implants

  • ASTM F882 : Performance and Safety Specification for Cryosurgical Medical Instruments

  • ASTM F883 : Performance Specification for Padlocks

  • ASTM F884 : Test Method for Motor Life Evaluation of a Built In (Central Vacuum) Vacuum Cleaner

  • ASTM F885 : Specification for Envelope Dimensions for Bronze Globe Valves NPS / to 2

  • ASTM F886-84(1990) : Test Method for Apparent Nitrogen Digestibility for Meat and Meat Products (Withdrawn 1995)

  • ASTM F887 : Specifications for Personal Climbing Equipment

  • ASTM F888 : Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in aVacuum Cleaner

  • ASTM F889-84(1990) : Test Method for Characterizing a Combination of Properties of Planar Surfaces to a Technical Level by a Vacuum Hold-Down Technique (Withdrawn 1996)

  • ASTM F890-84(1992) : Practice for Determining Pinhole Density in Photoresist Films Used in Microelectronic Device Processing (Withdrawn 1996)

  • ASTM F892 : Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn2001) No Replacement

  • ASTM F892-95 : Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)

  • ASTM F893 : Guide for Inspection of Amusement Rides and Devices

  • ASTM F894 : Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

  • ASTM F895 : Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

  • ASTM F89-68(1973) : Method for Determination of the Modulus of a Flexible Barrier Material by Sonic Method (Withdrawn 1980)

  • ASTM F896-90(1999) : Specification for Flexible Fiberoptic Bronchoscopes (Withdrawn 2002)

  • ASTM F897 : Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws

  • ASTM F898-85 : Practice for Permanent Marking of Orthopedic Implant Components (Withdrawn 1992)

  • ASTM F899 : Specification for Stainless Steel for Surgical Instruments

    • Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    November 2024
    M T W T F S S
    « Aug    
     123
    45678910
    11121314151617
    18192021222324
    252627282930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.