현재 위치: [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | » ASTM F 7XXX

ASTM F 7XXX

  • ASTM F7 : Specification for Aluminum Oxide Powder

  • ASTM F700 : Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments

  • ASTM F701 : Practice for Care and Handling of Neurosurgical Implants and Instruments

  • ASTM F702 : Specification for Polysulfone Resin for Medical Applications

  • ASTM F703 : Specification for Implantable Breast Prostheses

  • ASTM F704 : Practice for Selecting Bolting Lengths for Piping System Flanged Joints

  • ASTM F706 : Practice for Determination of Fusion Temperature of Dry Electrostatic Heat Fixing Toners

  • ASTM F70-68(1983) : Specification for Cathode Carbonates (Withdrawn 1990)

  • ASTM F707/F707M : Specification for Modular Gage Boards

  • ASTM F708 : Practice for Design and Installation of Rigid Pipe Hangers

  • ASTM F709-80(1991) : Specification for Gasket–Asbestos Metallic Cloth Material (Withdrawn 1993)

  • ASTM F71 : Practice for Using the Morphological Key for the Rapid Identification of Fibers forContamination Control in Electron Devices and Microelectronics (Withdrawn 2005) Replaced by D276

  • ASTM F710 : Practice for Preparing Concrete Floors to Receive Resilient Flooring

  • ASTM F711 : Specification for Fiberglass Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools

  • ASTM F712 : Test Methods for Electrically Insulating Plastic Guard Equipment for Protection of Workers

  • ASTM F715 : Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

  • ASTM F716 : Methods of Testing Sorbent Performance of Absorbents

  • ASTM F71-68(1999) : Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics (Withdrawn 2005)

  • ASTM F719 : Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation

  • ASTM F72 : Specification for Gold Wire for Semiconductor Lead Bonding

  • ASTM F720 : Practice for Testing Guinea Pigs for Contact Allergens Guinea Pig Maximization Test

  • ASTM F721 : Specification for Gage Piping Assemblies

  • ASTM F722 : Specification for Welded Joints for Shipboard Piping Systems

  • ASTM F723 : Practice for Conversion Between Resistivity and Dopant Density for Boron Doped,

  • ASTM F723-99 : Practice for Conversion Between Resistivity and Dopant Density for Boron-Doped, Phosphorus-Doped, and Arsenic-Doped Silicon (Withdrawn 2003)

  • ASTM F724 : Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

  • ASTM F725 : Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And FittingsStandards

  • ASTM F726 : Test Method for Sorbent Performance of Adsorbents

  • ASTM F727-81(1991) : Test Method for Measuring Transmittance of See-Through Photoplate (Withdrawn 1996)

  • ASTM F728 : Practice for Preparing An Optical Microscope for Dimensional Measurements (Withdrawn2003) No Replacement

  • ASTM F728-81(2003) : Practice for Preparing An Optical Microscope for Dimensional Measurements (Withdrawn 2003)

  • ASTM F729-81(1990)E01 : Test Methods for Temperature Coefficient of Resistance of Film Resistors (Withdrawn 1992)

  • ASTM F73 : Specification for Tungsten Rhenium Alloy Wire for Electron Devices and Lamps

  • ASTM F730-81(1990)E01 : Test Methods for Hermeticity of Electron Devices by a Weight-Gain Test (Withdrawn 1993)

  • ASTM F732 : Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

  • ASTM F733 : Practice for Optical Distortion and Deviation of Transparent Parts Using the Double ExposureMethod

  • ASTM F734 : Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

  • ASTM F735 : Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using theOscillating Sand Method

  • ASTM F736 : Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a FallingWeight

  • ASTM F737-86(1998)e1 : Performance Specification for Ice Hockey Skate Blades (Withdrawn 2002)

  • ASTM F738M : Specification for Stainless Steel Metric Bolts, Screws, and Studs

  • ASTM F740-82a(1993) : Definition of Terms Relating to Filtration (Withdrawn 2002)

  • ASTM F741-81(1987) : Method for Determining the Crystallographic Axes and Contrast Ratio of a Pockels Cell Electro-Optic Crystal Operating in the Longitudinal Mode (Withdrawn 1994)

  • ASTM F742-81(1987) : Practice for Evaluating an Interferometer (Withdrawn 1994)

  • ASTM F743-81(1987)E01 : Test Method for Measuring Contrast Ration of a Pair of Linear Polarizers for Visible Radiation (Withdrawn 1995)

  • ASTM F744M : Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits[미터]

  • ASTM F745 : Specification for 18 크롬 12.5 니켈 2.5 Molybdenum Stainless Steel for Cast andSolution Annealed Surgical Implant Applications

  • ASTM F746 : Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

  • ASTM F747 : Terminology Relating to Amusement Rides and Devices

  • ASTM F74-73(1989) : Practice for Determining Hydrolytic Stability of Plastic Encapsulants for Electronic Devices (Withdrawn 1994)

  • ASTM F748 : Practice for Selecting Generic Biological Test Methods for Materials and Devices

  • ASTM F749 : Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit

  • ASTM F75 : Specification for Cobalt 28 크롬 6 Molybdenum Alloy Castings and Casting Alloy forSurgical Implants (UNS R30075)

  • ASTM F750 : Practice for Evaluating Material Extracts by Systemic Injection in the Mouse

  • ASTM F751 : Test Method for Measuring Particle Size of Wide Size Range Dry Toners (Withdrawn 2003) No Replacement

  • ASTM F751-83(1997) : Test Method for Measuring Particle Size of Wide-Size Range Dry Toners (Withdrawn 2003)

  • ASTM F752-82(1989) : Test Method for Effective Series Resistance (ESR) and Capitance of Multilayer Ceramic Capacitors at High Frequencies (Withdrawn 1994)

  • ASTM F753-87 : Classification of Brassieres (Withdrawn 1998)

  • ASTM F755 : Specification for Selection of Porous Polyethylene for Use in Surgical Implants

  • ASTM F756 : Practice for Assessment of Hemolytic Properties of Materials

  • ASTM F757 : Test Method for Determining Energy Consumption of Copier and Copier DuplicatingEquipment

  • ASTM F758 : Specification for Smooth Wall Poly(염화 비닐) (PVC) Plastic Underdrain Systems forHighway, Airport, and Similar Drainage

  • ASTM F759-88E01 : Specification for Hot Chocolate Beverage Dispensers (Withdrawn 1995)

  • ASTM F76 : Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility inSingle Crystal Semiconductors

  • ASTM F760 : Specification for Food Service Equipment Manuals

  • ASTM F761 : Specification for Strength Requirements of Steel Posts and Rails for Residential Chain-LinkFence (Withdrawn 2003) No Replacement

  • ASTM F761-97 : Specification for Strength Requirements of Steel Posts and Rails for Residential Chain-Link Fence (Withdrawn 2003)

  • ASTM F762 : Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled forPassenger Car Tires

  • ASTM F763 : Practice for Short Term Screening of Implant Materials

  • ASTM F764 : Practice for Compatibility of Materials with High Energy Propellants (Impact SensitivityThreshold Technique) (Withdrawn 2003) No Replacement

  • ASTM F764-82(1994) : Practice for Compatibility of Materials with High-Energy Propellants (Impact Sensitivity Threshold Technique) (Withdrawn 2003)

  • ASTM F765 : Specification for Wildcats, Ship Anchor Chain

  • ASTM F766 : Test Method for Melting Point of Waxes

  • ASTM F767 : Test Method for Image Stability of Chemical Carbonless Paper to Light

  • ASTM F768-82(1987) : Method for Specular Reflectance and Transmittance Measurements of Optically Flat-Coated and Non-Coated Specimens (Withdrawn 1994)

  • ASTM F769 : Test Method for Measuring Transistor and Diode Leakage Currents

  • ASTM F770 : Practice for Ownership and Operation of Amusement Rides and Devices

  • ASTM F771 : Specification for Polyethylene (PE) Thermoplastic High Pressure Irrigation Pipeline Systems

  • ASTM F772-82(1990) : Test Method for Noise Quality of Film-Type Resistors (Withdrawn 1996)

  • ASTM F773-92 : Practice for Measuring Dose Rate Response of Linear Integrated Circuits

  • ASTM F773M : Practice for Measuring Dose Rate Response of Linear Integrated Circuits [미터]

  • ASTM F774-82 : Guide for Analysis of Latchup Susceptibility in Bipolar Integrated Circuits (Withdrawn 1989)

  • ASTM F775-88 : Test Method for Wafer and Slice Flatness by Interferometric (Withdrawn 1991)

  • ASTM F77-69(1996) : Test Method for Apparent Density of Ceramics for Electron Device and Semiconductor Application (Withdrawn 2001)

  • ASTM F777-89 : Test Method for Resistance of Electrical Wire Insulation Materials to Flame at 60 Degrees (Withdrawn 1997)

  • ASTM F778 : Methods for Gas Flow Resistance Testing of Filtration Media

  • ASTM F779 : Test Method for Torsion Characteristic of Alpine Skis

  • ASTM F78 : Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards

  • ASTM F780 : Test Method for Linear Deformation and Breaking Strength of Alpine Skis

  • ASTM F781 : Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic Lined Ferrous Metal Pipeand Fittings (Withdrawn 2004) No Replacement

  • ASTM F781-95 : Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) 플라스틱 줄 지어 철 금속 파이프 및 피팅 (Withdrawn 2004)

  • ASTM F782 : Specification for Doors, Furniture, 선박

  • ASTM F783 : Specification for Staple, Handgrab, Handle, and Stirrup Rung

  • ASTM F784-82(1990) : Test Method for Calibrating Radioisotope Hermetric Test Apparatus (Withdrawn 1996)

  • ASTM F785-82(1990)E01 : Test Method for Hermeticity of Sealed Devices by a Radioisotope Test (Withdrawn 1996)

  • ASTM F786-82(1991) : Specification for Metallic Bone Plates (Withdrawn 1998)

  • ASTM F787-82(1991) : Specification for Metallic Nail-Plate Appliances (Withdrawn 1998)

  • ASTM F788/F788M : Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

  • ASTM F789 : Specification for Type PS 46 and Type PS 115 Poly(염화 비닐) (PVC) Plastic Gravity FlowSewer Pipe and Fittings (Withdrawn 2004) No Replacement

  • ASTM F789-95a : Specification for Type PS-46 and Type PS-115 Poly(염화 비닐) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Withdrawn 2004)

  • ASTM F79 : Specification for Type 101 Sealing Glass

  • ASTM F790 : Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

  • ASTM F791 : Test Method for Stress Crazing of Transparent Plastics

  • ASTM F792 : Practice for Evaluating the Imaging Performance of Security X Ray Systems

  • ASTM F793 : Classification of Wall Covering by Use Characteristics

  • ASTM F794 : 폴리에 대한 규정(염화 비닐) (PVC) Profile Gravity Sewer Pipe and Fittings Based onControlled Inside Diameter

  • ASTM F795-88(1993) : Practice for Determining the Performance of a Filter Medium Employing a Single-Pass, Constant-Rate, Liquid Test (Withdrawn 2002)

  • ASTM F796-88(1993) : Practice for Determining The Performance of a Filter Medium Employing a Single-Pass, Constant-Pressure, Liquid Test (Withdrawn 2002)

  • ASTM F797-88(1993) : Practice for Determining the Performance of a Filter Medium Employing a Multipass, Constant-Rate, Liquid Test (Withdrawn 2002)

  • ASTM F798 : Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content ofNonevaporable Getters in the Molecular Flow Region

  • ASTM F799 : Specification for Cobalt 28 크롬 6 Molybdenum Alloy Forgings for Surgical Implants(UNS R31537, R31538, R31539)

    • 회사 소개 :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    이러한 : 02-980-9800(대표전화)
    E-메일: info @ anytest.co.kr,en (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 1월 10일 - 2:28 오후

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 12월 11일 - 6:40 오후

      MIL-사양, MIL-STD 자료 상담 MIL-Spec Download,ko(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 8월 18일 - 12:43 오후

      아래는 MIL-STD-810G Part Two,,ko,높은 온도 MIL-STD-810G 방법,,en,저온 MIL-STD-810G 방법,,en,온도 충격 MIL-STD-810G 방법,,en,유체 MIL-STD-810G 방법에 의한 오염,,en,MIL-STD-810G 방법을 비,,en,습도 MIL-STD-810G 방법,,en,곰팡이 MIL-STD-810G 방법,,en (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 4월 12일 - 6:42 오후

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 3월 25일 - 8:01 오후

      ASTM E 119 – 건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84, NFPA 285, UL 790, BS 476-6/7, NF P92-507, FROM 4102, IN 13501, GB 8624, BS 476-20，IN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    11월 2024
    월 화 수 목 금 토 일
    « Aug    
     123
    45678910
    11121314151617
    18192021222324
    252627282930  
    © 저작권 - [AP Network 인증원-해외 제품 시험인증 상담,,ko,자동차 OEM 규격시험,,ko | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | FROM | IN, GOST-R | 테스트 & 증명서 | - 웹 페이지는 Performancenetwork Inc.에 의해 구축.