You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM F3XXX

ASTM F3XXX

  • ASTM F3 : Specification for Nickel Strip for Electron Tubes

  • ASTM F30 : Specification for Iron Nickel Sealing Alloys

  • ASTM F300-64(1987) : Methods of Measuring Interface Impedance Characteristics of Electron Tube Cathodes (Withdrawn 1992)

  • ASTM F301-91 : Practice for Open Bottle Tap Sampling of Liquid Streams (Withdrawn 2000)

  • ASTM F302 : Practice for Field Sampling of Aerospace Fluids in Containers

  • ASTM F303 : Practices for Sampling for Particles in Aerospace Fluids and Components

  • ASTM F304-70(1980) : Method of Sampling for Particulates from Aerospace Components with Convolutes (Withdrawn 1988)

  • ASTM F305-70(1980) : Method of Sampling Particulates from Reservoir-Type Pressure-Sensing Instruments by Fluid Flushing (Withdrawn 1988)

  • ASTM F306-70(1999) : Practice for Sampling Particulates from Man-Accessible Storage Vessels for Aerospace Fluids by Vacuum Entrainment Technique (General Method) (Withdrawn 2000)

  • ASTM F307 : Practice for Sampling Pressurized Gas for Gas Analysis

  • ASTM F308-73(1980) : Method of Sampling Gas Blow-Down Systems and Components for Particulate Contamination by Manual Method (Withdrawn 1988)

  • ASTM F309 : Practice for Liquid Sampling of Noncryogenic Aerospace Propellants

  • ASTM F31 : Specification for 42% Nickel 6% Chromium Iron Sealing Alloy

  • ASTM F310 : Practice for Sampling Cryogenic Aerospace Fluids

  • ASTM F311 : Practice for Processing Aerospace Liquid Samples for Particulate Contamination AnalysisUsing Membrane Filters

  • ASTM F312 : Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids onMembrane Filters

  • ASTM F313-78(1983) : Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis (Withdrawn 1990)

  • ASTM F314-70(1980) : Methods of Test for Identification of Metallic and Fibrous Contaminants in Aerospace Fluids (Withdrawn 1991)

  • ASTM F315-70(1996) : Test Method of Identification of Solder and Solder Flux Contaminants in Aerospace Fluids (Withdrawn 1998)

  • ASTM F316 : Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and MeanFlow Pore Test

  • ASTM F317-72(1982) : Test Method for Liquid Flow Rate of Membrane Filters (Withdrawn 1995)

  • ASTM F318 : Practice for Sampling Airborne Particulate Contamination in Cleanrooms for HandlingAerospace Fluids

  • ASTM F319 : Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

  • ASTM F320 : Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

  • ASTM F321-72 : Automatic Particle Counter Size Setting Method (Withdrawn 1983)

  • ASTM F322-80 : Method for Determining the Quality of Calibration Particles for Automatic Particle Counters (Withdrawn 1992)

  • ASTM F323-78(1983) : Practice for Precision Classification of Particles (Withdrawn 1989)

  • ASTM F324-75(1980) : Test Method for Nonvolatile Residue of Volatile Cleaning Solvents Using the Solvent Purity Meter (Withdrawn 1987)

  • ASTM F326 : Test Method for Electronic Measurement for Hydrogen Embrittlement from CadmiumElectroplating Processes

  • ASTM F32-68 : Recommended Practice for Sumuth-Adhesion Testing of Cathode Coatings (Withdrawn 1973)

  • ASTM F327 : Practice for Sampling Gas Blow Down Systems and Components for ParticulateContamination by Automatic Particle Monitor Method

  • ASTM F328 : Practice for Calibration of an Airborne Particle Counter Using Monodisperse SphericalParticles

  • ASTM F329-78(1983) : Practice for Sampling and Measurement of Particulate Contamination in Liquids Using an In-Line Automatic Monitor (Withdrawn 1993)

  • ASTM F33- : Recommended Practice for Determination of Gas Content of Strip Materials (Withdrawn 1971)

  • ASTM F330 : Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

  • ASTM F331 : Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (UsingFlash Evaporator)

  • ASTM F332-75(1980) : Method of Test for Amount of Nonvolatile Residue (NVR) in Trichlorotrifluouroethane (Meseran Procedure) (Withdrawn 1982)

  • ASTM F333-75(1980) : Method of Test for Amount of Lubricant on the Surface of Aluminum Foils (Meseran Procedure) (Withdrawn 1982)

  • ASTM F334-88 : Method for Measuring Lithium-Ion Drift Mobility in Germanium Single Crystals (Withdrawn 1990)

  • ASTM F335 : Terminology Relating to Electrostatic Copying

  • ASTM F336 : Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service

  • ASTM F337-71(1979) : Recommended Practice for Dimensions and Tolerances for Bone Plates (Withdrawn 1982)

  • ASTM F338-77 : Specification for Tipial Type Bone Plate (Withdrawn 1982)

  • ASTM F339-71(1993) : Specification for Cloverleaf Intramedullary Pins (Withdrawn 1998)

  • ASTM F34 : Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

  • ASTM F340-71(1993)e1 : Specification for Pilot-Type Medical Countersinks (Withdrawn 1997)

  • ASTM F341-71 : Specification for Slotted Bone Plates (Withdrawn 1982)

  • ASTM F342-71(1987) : Specification for Counterlocking Screws (Thornton Type) (Withdrawn 1993)

  • ASTM F343-71(1987) : Specification for Counterlocking Screws (McLaughlin Type) (Withdrawn 1993)

  • ASTM F344-71(1987) : Specification for Counterbored Hex-Head Bolts (Thornton Type) Made From Stainless Steel (Withdrawn 1993)

  • ASTM F345-71(1987) : Specification for Counterbored Hex-Head Bolts (McLaughlin Type) Made From Stainless Steel (Withdrawn 1993)

  • ASTM F346-71(1987) : Specification for Cannulated Hex-Head Bolts (Thornton Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F347-71(1987) : Specification for Cannulated Hex-Head Bolts (McLaughlin Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F348-41(1987) : Specification for Hex-Head Bolts (Thornton Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F349-71(1987) : Specification for Hex-Head Bolts (McLaughlin Type) Made From Cobalt-Chromium Alloy (Withdrawn 1993)

  • ASTM F350-71(1987) : Specification for Hex-Head Bolts (Thornton Type) and Lock Washers Made From Stainless Steel (Withdrawn 1993)

  • ASTM F351-71(1987) : Specification for Hex-Head Bolts (McLaughlin Type) and Lock Washers Made From Stainless Steel (Withdrawn 1993)

  • ASTM F352-71(1987) : Specification for Lock Washers Made From Stainless Steel (Withdrawn 1993)

  • ASTM F353-71(1977) : Specification for Tri-Fin Nails Made From Cobalt-Chromium Alloy (Withdrawn 1991)

  • ASTM F354-71(1977) : Specification for Tri-Fin Nails Made From Stainless Steel (Withdrawn 1991)

  • ASTM F356-75(1996) : Specification for Beryllia Ceramics for Electronic and Electrical Applications (Withdrawn 2001)

  • ASTM F35-68(1988) : Practice for Identification of Minute Crystalline Particle Contaminants by X-Ray Diffraction (Withdrawn 1994)

  • ASTM F357 : Practice for Determining Solderability of Thick Film Conductors

  • ASTM F358 : Test Method for Wavelength of Peak Photoluminescence and the CorrespondingComposition of Gallium Arsenide Phosphide Wafers

  • ASTM F359 : Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N 2) (Withdrawn 2003) No Replacement

  • ASTM F359-82(1994)e1 : Practice for Static Immersion Testing of Unstressed Materials in Nitrogen Tetroxide (N 2) (Withdrawn 2003)

  • ASTM F36 : Test Method for Compressibility and Recovery of Gasket Materials

  • ASTM F360 : Practice for Image Evaluation of Electrostatic Business Copies

  • ASTM F361-80 : Practice for Assessment of Compatibility of Metallic Materials for Surgical Implants With Respect to Effect of Materials on Tissue (Withdrawn 1987)

  • ASTM F362 : Test Method for Determining the Erasability of Inked Ribbons

  • ASTM F363 : Test Method for Corrosion Testing of Gaskets

  • ASTM F364 : Specification for Molybdenum Flattened Wire for Electron Tubes

  • ASTM F365-73 : Recommended Practice for Electrostatic Charge Mobility on Flexible Barrier Materials (Withdrawn 1977)

  • ASTM F366 : Specification for Fixation Pins and Wires

  • ASTM F367-81(1991) : Specification for Holes and Slots for Inch Cortical Bone Screws (Withdrawn 1997)

  • ASTM F367M-82(1991) : Specification for Holes and Slots With Spherical Contour for Metric Cortical Bone Screws (Metric) (Withdrawn 1997)

  • ASTM F368-73 : Specification for Fixation Pins-Knowles and Hagie Types (Withdrawn 1982)

  • ASTM F369-73 : Specification for Hip Nail-Jewett Type (Withdrawn 1982)

  • ASTM F37 : Test Methods for Sealability of Gasket Materials

  • ASTM F370 : Specification for Proximal Femoral Endoprosthesis (Withdrawn 2005) No Replacement 0 ASTM 0

  • ASTM F370-94(1999) : Specification for Proximal Femoral Endoprosthesis (Withdrawn 2005)

  • ASTM F371 : Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method) (Withdrawn 2003) No Replacement

  • ASTM F371-83(1994)e1 : Test Method for Compatibility of Materials with Liquid Oxygen (Reaction Intensity Method) (Withdrawn 2003)

  • ASTM F372 : Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using anInfrared Detection Technique

  • ASTM F373 : Test Method for Embossed Depth of Resilient Floor Coverings

  • ASTM F374 : Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ionimplanted Layers Using an In Line Four Point Probe with the Single Configuration Procedure(Withdrawn 2003) No Replacement

  • ASTM F374-02 : Test Method for Sheet Resistance of Silicon Epitaxial, Diffused, Polysilicon, and Ion-implanted Layers Using an In-Line Four-Point Probe with the Single-Configuration Procedure (Withdrawn 2003)

  • ASTM F375 : Specification for Integrated Circuit Lead Frame Material

  • ASTM F376/F376M-89 : Test Method for Tires for Wet Traction Performance in Cornering (Withdrawn 1994)

  • ASTM F377 : Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires

  • ASTM F378- : Method of Test for Electrical Ignition Characteristics of Gas-Filled Flash Lamps (Withdrawn 1978)

  • ASTM F379-76(1987) : Recommended Practice for Measuring Slope Efficiency and Lasing Threshold of Ruby Laser Rods (Withdrawn 1994)

  • ASTM F38 : Test Methods for Creep Relaxation of a Gasket Material

  • ASTM F380-77(1989) : Test Method for Effective Fluorescent Lifetime of Neodymium-Doped Laser Materials (Withdrawn 1994)

  • ASTM F382 : Specification and Test Method for Metallic Bone Plates

  • ASTM F384 : Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices

  • ASTM F386 : Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

  • ASTM F387 : Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

  • ASTM F388-84 : Method for Measurement of Oxide Thickness on Silicon Wafers and Metallization Thickness by Multiple-Beam Interference (Tolansky Method) (Withdrawn 1993)

  • ASTM F390 : Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four Probe Array

  • ASTM F391 : Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors byMeasurement of Steady State Surface Photovoltage (Withdrawn 2003) No Replacement

  • ASTM F391-02 : Test Methods for Minority Carrier Diffusion Length in Extrinsic Semiconductors by Measurement of Steady-State Surface Photovoltage (Withdrawn 2003)

  • ASTM F392 : Test Method for Flex Durability of Flexible Barrier Materials

  • ASTM F394-78(1996) : Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)

  • ASTM F39-59 : Methods of Testing Compressed Asbestos Sheet Packing (Withdrawn 1978)

  • ASTM F396 : Practice for Comparing One Time Noncorrectable Typewriter Ribbons

  • ASTM F397 : Test Method for Resistivity of Silicon Bars Using a Two Point Probe (Withdrawn 2003) NoReplacement

  • ASTM F397-02 : Test Method for Resistivity of Silicon Bars Using a Two-Point Probe (Withdrawn 2003)

  • ASTM F398 : Test Method for Majority Carrier Concentration in Semiconductors by Measurement ofWavenumber or Wavelength of the Plasma Resonance Minimum (Withdrawn 2003) No Replacement

  • ASTM F398-92(2002) : Test Method for Majority Carrier Concentration in Semiconductors by Measurement of Wavenumber or Wavelength of the Plasma Resonance Minimum (Withdrawn 2003)

  • ASTM F399-00a : Test Method for Thickness of Heteroepitaxial or Polysilicon Layers (Withdrawn 2002)

    • Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    November 2024
    M T W T F S S
    « Aug    
     123
    45678910
    11121314151617
    18192021222324
    252627282930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.