You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM F 1XXX

ASTM F 1XXX

  • ASTM F1000 : Practice for Piping System Drawing Symbols (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM F1001 : Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

  • ASTM F1001-99A : Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

  • ASTM F1002 : Performance Specification for Protective Clothing for Use by Workers Exposed to SpecificMolten Substances and Related Thermal Hazards

  • ASTM F1002-05 : Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards

  • ASTM F1003 : Specification for Searchlights on Motor Lifeboats

  • ASTM F1003-02 : Specification for Searchlights on Motor Lifeboats

  • ASTM F1003-86(1992) : Specification for Searchlights on Motor Lifeboats

  • ASTM F1004 : Consumer Safety Specification for Expansion Gates and Expandable Enclosures

  • ASTM F1004-04 : Consumer Safety Specification for Expansion Gates and Expandable Enclosures

  • ASTM F1005 : Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

  • ASTM F1005-91R02 : Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

  • ASTM F1006 : Specification for Entrainment Separators for Use in Marine Piping Applications

  • ASTM F1006-86R04 : Specification for Entrainment Separators for Use in Marine Piping Applications

  • ASTM F1007 : Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

  • ASTM F100-71(1991) : Test Method for Shrinkage Stresses in Plastic Embedment Materials Using a Photoelastic Technique for Electronic and Similar Applications (Withdrawn 1996)

  • ASTM F1007-86R02 : Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

  • ASTM F1008-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Salt Marshes (Withdrawn 2001)

  • ASTM F1009-86(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Offshore (Withdrawn 2002)

  • ASTM F1010-86(1993)e1 : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Bird Habitats (Withdrawn October 2001)

  • ASTM F1011 : Guide for Developing a Hazardous Materials Training Curriculum for Initial ResponsePersonnel

  • ASTM F1011-86R01 : Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel

  • ASTM F1012-86(1999) : Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-the Arctic (Withdrawn 2002)

  • ASTM F1013-92 : Practice for Determining the Performance of a Liquid/Liquid Separator System Employing a Single-Pass, Constant-Rate, Non-Solids Test (Withdrawn 2001)

  • ASTM F1014 : Specification for Flashlights on Vessels

  • ASTM F1014-02 : Specification for Flashlights on Vessels

  • ASTM F1014-92 : Specification for Flashlights on Vessels

  • ASTM F1015 : Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

  • ASTM F1015-03 : Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

  • ASTM F1016 : Practice for Linear Tire Treadwear Data Analysis

  • ASTM F1016-93R01 : Practice for Linear Tire Treadwear Data Analysis

  • ASTM F1017 : Test Method for Testing Lateral Toe Release of Adult Alpine Ski Bindings Under Impact Loading

  • ASTM F101-71 : Specification for Composite Strip of Iron-Nickel-Cobalt Alloy and Copper for use in Electron Devices (Withdrawn 1973)

  • ASTM F1017-86(1994) : Test Method for Testing Lateral Toe Release of Adult Alpine Ski Bindings Under Impact Loading (Withdrawn 2002)

  • ASTM F1018 : Specification for Steel Emergency Gear Stowage Locker

  • ASTM F1018-87AR04 : Specification for Steel Emergency Gear Stowage Locker

  • ASTM F1019M : Specification for Steel Deck Gear Stowage Box [Metric]

  • ASTM F1019M-00 : Specification for Steel Deck Gear Stowage Box \[Metric\]

  • ASTM F1020 : Specification for Line Blind Valves for Marine Applications

  • ASTM F1020-86R01 : Specification for Line-Blind Valves for Marine Applications

  • ASTM F1021 : Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for CommercialDishwashing and Glasswashing Machines

  • ASTM F1021-95R01 : Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines

  • ASTM F1022 : Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type

  • ASTM F1022-95R00 : Specification for Chemical Sanitizing Commercial Dishwashing Machines, Recirculated Wash, Fresh Water Rinse Type

  • ASTM F1023 : Specification for Dispensers, Powdered Iced Tea

  • ASTM F1023-99R04 : Specification for Dispensers, Powdered Iced Tea

  • ASTM F1024 : Specification for Dispensers, Rehydrated Mashed Potato (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM F1024-99 : Specification for Dispensers, Rehydrated Mashed Potato (Withdrawn 2004)

  • ASTM F1025 : Guide for Selection and Use of Full Encirclement Type Band Clamps for Reinforcement orRepair of Punctures or Holes in Polyethylene Gas Pressure Pipe

  • ASTM F1025-94R00 : Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

  • ASTM F1026 : Specification for General Workmanship and Performance Measurements of HemostaticForceps

  • ASTM F1026-86R02 : Specification for General Workmanship and Performance Measurements of Hemostatic Forceps

  • ASTM F1027 : Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials andDevices

  • ASTM F102-71(1983) : Method for Spectrochemical Analysis of Emissive Carbonates by the Powder D-C Arc Technique (Withdrawn 1990)

  • ASTM F1027-86R02 : Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices

  • ASTM F1028-86(1991) : Specification for Tri-Fin Nails (Withdrawn 1997)

  • ASTM F1029 : Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004) NoReplacement

  • ASTM F1029-86(1997)e1 : Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004)

  • ASTM F1030 : Practice for Selection of Valve Operators

  • ASTM F1030-86R04 : Practice for Selection of Valve Operators

  • ASTM F1031-00 : Practice for Training the Emergency Medical Technician (Basic)

  • ASTM F1032-91 : Guide for Measuring Time-Dependant Total-Dose Effects in Semiconductor Devices Exposed to Pulsed Ionizing Radiation (Withdrawn 1994)

  • ASTM F1033 : Test Method for Comparing Lift Off Correction Media

  • ASTM F1033-00R04 : Test Method for Comparing Lift-Off Correction Media

  • ASTM F1034-86(1997) : Guide for Classifying Industrial Robots (Withdrawn 2000)

  • ASTM F1035 : Practice for Use of Rubber Cord Pie Disk to Demonstrate the Discernment Capability of aTire X ray Imaging System

  • ASTM F1035-03 : Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System

  • ASTM F1037 : Test Method for Visual Rating of Appearance of Resilient Floors After In Service Exposure toFoot Traffic

  • ASTM F103-70 : Specification for Alumina (Withdrawn 1972)

  • ASTM F1037-04 : Test Method for Visual Rating of Appearance of Resilient Floors After In-Service Exposure to Foot Traffic

  • ASTM F1038 : Test Method for Motor Life Evaluation of a Canister, Hand held, Stick, and Utility TypeVacuum Cleaner Without a Driven Agitator

  • ASTM F1038-02E01 : Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator

  • ASTM F1039 : Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems

  • ASTM F1039-87(1993)e1 : Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems (Withdrawn 2002)

  • ASTM F104 : Classification System for Nonmetallic Gasket Materials

  • ASTM F1040 : Specification for Filter Units, Air Conditioning Viscous Impingement and Dry Types, Replaceable

  • ASTM F1040-87R01 : Specification for Filter Units, Air Conditioning : Viscous-Impingement and Dry Types, Replaceable

  • ASTM F1041 : Guide for Squeeze Off of Polyolefin Gas Pressure Pipe and Tubing

  • ASTM F1041-02 : Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

  • ASTM F1042 : Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers

  • ASTM F1042-87R04 : Practice for Estimating Toner and Dispersant Usage in Copiers Utilizing Liquid Developers

  • ASTM F1043 : Specification for Strength and Protective Coatings on Metal Industrial Chain Link FenceFramework

  • ASTM F1043-04 : Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework

  • ASTM F1044 : Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

  • ASTM F1044-05 : Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

  • ASTM F1045-04 : Performance Specification for Ice Hockey Helmets

  • ASTM F1046 : Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

  • ASTM F1046-01 : Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing

  • ASTM F1047-04 : Specification for Frying and Braising Pans, Tilting Type

  • ASTM F1048 : Test Method for Measuring the Effective Surface Roughness of Optical Components by TotalIntegrated Scattering (Withdrawn 2003) No Replacement

  • ASTM F1048-87(1999) : Test Method for Measuring the Effective Surface Roughness of Optical Components by Total Integrated Scattering (Withdrawn 2003)

  • ASTM F1049 : Practice for Shallow Etch Pit Detection on Silicon Wafers (Withdrawn 2003 No Replacement 0 ASTM 0

  • ASTM F1049-02 : Practice for Shallow Etch Pit Detection on Silicon Wafers (Withdrawn 2003

  • ASTM F105 : Specification for Type 58 Borosilicate Sealing Glass

  • ASTM F1050 : Test Method for Determining Winding Torque and Tension of Typewriter Ribbons

  • ASTM F1050-87R00E01 : Test Method for Determining Winding Torque and Tension of Typewriter Ribbons

  • ASTM F1051 : Test Method for Comparing Multistrike Film Ribbons

  • ASTM F1051-00R04 : Test Method for Comparing Multistrike Film Ribbons

  • ASTM F1052 : Test Method for Pressure Testing Vapor Protective Ensembles

  • ASTM F1052-97R02 : Test Method for Pressure Testing Vapor Protective Ensembles

  • ASTM F1053/F1053M : Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM F1053/F1053M-94 : Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003)

  • ASTM F1053/F1053M : Guide for Steel Hull Construction Tolerances \[Metric\]

  • ASTM F1054 : Specification for Conical Fittings (Withdrawn 2005) Replaced by ISO5356 0 ASTM 0

  • ASTM F1054-01 : Specification for Conical Fittings (Withdrawn 2005)

  • ASTM F1055 : Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter ControlledPolyethylene Pipe and Tubing

  • ASTM F1055-98E01 : Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing

  • ASTM F1056 : Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe orTubing and Fittings

  • ASTM F1056-04 : Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

  • ASTM F1057-87R00 : Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

  • ASTM F1058 : Specification for Wrought 40Cobalt 20Chromium 16Iron 15Nickel 7Molybdenum Alloy Wireand Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

  • ASTM F1058-02 : Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

  • ASTM F1059-87(1992) : Practice for Calculating the Contrast and Threshold Sensitivity of a Positive Photoresist (Withdrawn 1996)

  • ASTM F106 : Specification for Brazing Filler Metals for Electron Devices

  • ASTM F1060 : Test Method for Thermal Protective Performance of Materials for Protective Clothing for HotSurface Contact

  • ASTM F1060-05 : Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact

  • ASTM F1061 : Specification for Ski Binding Test Devices

  • ASTM F1061-97R03 : Specification for Ski Binding Test Devices

  • ASTM F1062 : Test Method for Verification of Ski Binding Test Devices

  • ASTM F1062-97R03 : Test Method for Verification of Ski Binding Test Devices

  • ASTM F1063 : Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

  • ASTM F1063-04 : Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems

  • ASTM F1064 : Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/BootSystems in Rental Applications

  • ASTM F1064-03 : Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications

  • ASTM F1065-89 : Practice for the Inspection of Incomplete Alpine Ski/Boot/Binding Systems in Rental Applications (Withdrawn 1994)

  • ASTM F1066 : Specification for Vinyl Composition Floor Tile

  • ASTM F1066-04 : Specification for Vinyl Composition Floor Tile

  • ASTM F1067-92 : Test Method for Determining the Performance of a Petroleum Product Filter Cartridge Using a Single-Pass Constant Rate Procedure (Withdrawn 2001)

  • ASTM F1068 : Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

  • ASTM F1068-90R03 : Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

  • ASTM F1069 : Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

  • ASTM F10-69(1986) : Specification for Miniature Electron Tube Leads (Withdrawn 1992)

  • ASTM F1069-87R04 : Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

  • ASTM F1070 : Specification for Doors, Non Tight, for Marine Use

  • ASTM F1070-87R04 : Specification for Doors, Non-Tight, for Marine Use

  • ASTM F1071 : Specification for Expanded Metal Bulkhead Panels

  • ASTM F1071-94R99 : Specification for Expanded-Metal Bulkhead Panels

  • ASTM F1072 : Specification for Expanded Metal Doors

  • ASTM F1072-94R99 : Specification for Expanded-Metal Doors

  • ASTM F1073 : Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non TightDoors, for Marine Use

  • ASTM F1073-87R99 : Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

  • ASTM F1074 : Specification for Cleats, Welded Horn Type

  • ASTM F1074-87R02 : Specification for Cleats, Welded Horn Type

  • ASTM F1075 : Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self Contained

  • ASTM F1075-97R04 : Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

  • ASTM F1076 : Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

  • ASTM F1076-87R04 : Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

  • ASTM F1077 : Guide for Selection of Committee F16 Fastener Specifications

  • ASTM F107-72 : Specification for Boron-Deoxidized Copper in Drought Forms for Electron Devices (Withdrawn 1976)

  • ASTM F1077-95AR02 : Guide for Selection of Committee F16 Fastener Specifications

  • ASTM F1078 : Terminology for Surgical Scissors/Inserted and Non Inserted Blades

  • ASTM F1078-87R02 : Terminology for Surgical Scissors\MInserted and Non-Inserted Blades

  • ASTM F1079 : Specification for Inserted and Noninserted Surgical Scissors

  • ASTM F1079-87R02 : Specification for Inserted and Noninserted Surgical Scissors

  • ASTM F1080 : Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

  • ASTM F1080-93R02 : Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

  • ASTM F1081-97R03E01 : Specification for Competition Wrestling Mats

  • ASTM F1082 : Practice for Tires Determining Precision for Test Method Standards (Withdrawn 2006) NoReplacement

  • ASTM F1082-00(2000) : Practice for Tires-Determining Precision for Test Method Standards (Withdrawn 2006)

  • ASTM F1082-00R00 : Practice for Tires\MDetermining Precision for Test Method Standards

  • ASTM F1083 : Specification for Pipe, Steel, Hot Dipped Zinc Coated (Galvanized) Welded, for FenceStructures

  • ASTM F1083-04 : Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

  • ASTM F1084 : Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

  • ASTM F1084-90R02 : Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

  • ASTM F1085-03A : Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

  • ASTM F1086 : Guide for Structures and Responsibilities of Emergency Medical Services SystemsOrganizations

  • ASTM F1086-94R02 : Guide for Structures and Responsibilities of Emergency Medical Services Systems Organizations

  • ASTM F1087 : Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

  • ASTM F1087-02 : Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

  • ASTM F1088 : Specification for Beta Tricalcium Phosphate for Surgical Implantation

  • ASTM F1088-04A : Specification for Beta-Tricalcium Phosphate for Surgical Implantation

  • ASTM F108-88 : Test Method for Resistivity of Silicon Epitaxial Layers by the Three-Probe Voltage Breakdown Method (Withdrawn 1993)

  • ASTM F1089 : Test Method for Corrosion of Surgical Instruments

  • ASTM F1089-02 : Test Method for Corrosion of Surgical Instruments

  • ASTM F109 : Terminology Relating to Surface Imperfections on Ceramics

  • ASTM F1090 : Classification for Bank and Mercantile Vault Construction

  • ASTM F1090-87R97E01 : Classification for Bank and Mercantile Vault Construction

  • ASTM F1091 : Specification for Wrought Cobalt 20 Chromium 15 Tungsten 10 Nickel Alloy Surgical FixationWire (UNS R30605)

  • ASTM F1091-02 : Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire [UNS R30605]

  • ASTM F1092 : Specification for Fiberglass (GRP) Pultruded Open Weather Storm and Guard, Square RailingSystems

  • ASTM F1092-04 : Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

  • ASTM F1093 : Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

  • ASTM F1093-99 : Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

  • ASTM F1094 : Test Methods for Microbiological Monitoring of Water Used for Processing Electron andMicroelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic BagMethod

  • ASTM F1094-87R05 : Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method

  • ASTM F1095-88(1994)E01 : Test Method for Rapid Enumeration of Bacteria in Electronics-Grade Purified Water Systems by Direct-Count Epifluorescence Microscopy (Withdrawn 2001)

  • ASTM F1096-87 : Method for Measuring Mosfet Saturated Threshold Voltage (Withdrawn 1992)

  • ASTM F1097 : Specification for Mortar, Refractory (High Temperature, Air Setting)

  • ASTM F1097-91R01 : Specification for Mortar, Refractory (High-Temperature, Air-Setting)

  • ASTM F1098 : Specification for Envelope Dimensions for Butterfly Valves NPS 2 to 24

  • ASTM F1098-87R04 : Specification for Envelope Dimensions for Butterfly Valves\MNPS 2 to 24

  • ASTM F1099M : Specification for Rat Guards, Ship’s (Metric)

  • ASTM F1099M-98R05 : Specification for Rat Guards, Ship’s (Metric)

  • ASTM F110 : Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lappingand Staining Technique (Withdrawn 2003) No Replacement

  • ASTM F1100 : Specification for Ventilators Intended for Use in Critical Care (Withdrawn 2004) NoReplacement

  • ASTM F110-00a : Test Method for Thickness of Epitaxial or Diffused Layers in Silicon by the Angle Lapping and Staining Technique (Withdrawn 2003)

  • ASTM F1100-90(1997) : Specification for Ventilators Intended for Use in Critical Care (Withdrawn 2004)

  • ASTM F1101 : Specification for Ventilators Intended for Use During Anesthesia

  • ASTM F1101-90R03E01 : Specification for Ventilators Intended for Use During Anesthesia

  • ASTM F1102-94 : Guide for Preparation of Use and Care Booklets for Residential Resilient Nontextile Floor Coverings (Withdrawn 2000)

  • ASTM F1103-93 : Test Method for Materials Response to Flame–45 Degree (For Aerospace Vehicles) (Withdrawn 1998)

  • ASTM F1104 : Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, forStorage Stability Testing

  • ASTM F1104-02 : Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing

  • ASTM F1105-03 : Test Method for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

  • ASTM F1106 : Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

  • ASTM F1106-87R98 : Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

  • ASTM F1107 : Terminology Relating to Snowboarding

  • ASTM F1107-04 : Terminology Relating to Snowboarding

  • ASTM F1108 : Specification for Titanium 6Aluminum 4Vanadium Alloy Castings for Surgical Implants (UNSR56406)

  • ASTM F1108-04 : Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

  • ASTM F1109-87 : Specification for Porous Composites of Polytetrafluoroethylene and Carbon for Surgical Implant Applications (Withdrawn 1993)

  • ASTM F111 : Practice for Determining Barium Yield, Getter Gas Content, and Getter Sorption Capacity forBarium Flash Getters

  • ASTM F1110 : Test Method for Sandwich Corrosion Test

  • ASTM F1110-02 : Test Method for Sandwich Corrosion Test

  • ASTM F1111 : Test Method for Corrosion of Low Embrittling Cadmium Plate by Aircraft MaintenanceChemicals

  • ASTM F1111-02 : Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

  • ASTM F1112 : Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of InflationPressure

  • ASTM F1112-00 : Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure

  • ASTM F1113 : Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (BarnacleElectrode)

  • ASTM F1113-87R05E01 : Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)

  • ASTM F1114 : Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type WaterDriven Rotary Spray

  • ASTM F1114-94R00 : Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray

  • ASTM F1115 : Test Method for Determining the Carbon Dioxide Loss of Beverage Containers

  • ASTM F1115-95R01 : Test Method for Determining the Carbon Dioxide Loss of Beverage Containers

  • ASTM F1116 : Test Method for Determining Dielectric Strength of Dielectric Footwear

  • ASTM F1116-03 : Test Method for Determining Dielectric Strength of Dielectric Footwear

  • ASTM F1117 : Specification for Dielectric Footwear

  • ASTM F1117-03 : Specification for Dielectric Footwear

  • ASTM F1118 : Specification for National Air Medical Transport Units Resources Catalog

  • ASTM F1118-91R03 : Specification for National Air Medical Transport Units Resources Catalog

  • ASTM F1119-91 : Specification for Rotary Wing Basic Life Support Transport Units (Withdrawn 2000)

  • ASTM F112 : Test Method for Sealability of Enveloped Gaskets

  • ASTM F1120 : Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

  • ASTM F1120-87R04 : Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

  • ASTM F1121 : Specification for International Shore Connections for Marine Fire Applications

  • ASTM F1121-87R04 : Specification for International Shore Connections for Marine Fire Applications

  • ASTM F1122 : Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

  • ASTM F1122-04 : Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

  • ASTM F1123 : Specification for Non Metallic Expansion Joints

  • ASTM F1123-87R04 : Specification for Non-Metallic Expansion Joints

  • ASTM F1124-91 : Specification for Rotary Wing Advanced Life Support Transport Units (Withdrawn 2000)

  • ASTM F1125 : Termninology of Image Quality in Impact Printing Systems

  • ASTM F1125-87R00 : Terminology of Image Quality in Impact Printing Systems

  • ASTM F1126 : Specification for Food Cutters (Electric)

  • ASTM F1126-03 : Specification for Food Cutters, (Electric)

  • ASTM F1127 : Guide for Containment by Emergency Response Personnel of Hazardous Material Spills

  • ASTM F1127-01 : Guide for Containment by Emergency Response Personnel of Hazardous Material Spills

  • ASTM F1128-88 : Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996)

  • ASTM F1129 : Guide for Using Aquious Foams to Control the Vapor Hazard from Immiscible Volatile Liquids

  • ASTM F1129-01 : Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids

  • ASTM F1130 : Practice for Inspecting the Coating System of a Ship

  • ASTM F1130-99R05 : Practice for Inspecting the Coating System of a Ship

  • ASTM F1131-88 : Practice for Inspecting the Coating System of a Ship’s Tanks and Voids (Withdrawn 1993)

  • ASTM F1132-88 : Practice for Inspecting the Coating System of a Ship’s Deck and Deck Machinery (Withdrawn 1993)

  • ASTM F1133-88 : Practice for Inspecting the Coating System of a Ship’s Underwater Hull and Boottop During Drydocking (Withdrawn 1993)

  • ASTM F1134 : Specification for Insulation Resistance Monitor for Shipboard Electrical Motors andGenerators

  • ASTM F1134-94R02 : Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

  • ASTM F1135 : Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating forFasteners

  • ASTM F1135-99 : Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners

  • ASTM F1136 : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

  • ASTM F1136-04 : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

  • ASTM F1136M : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]

  • ASTM F1136M-04 : Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners \[Metric\]

  • ASTM F1137 : Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings forFasteners

  • ASTM F1137-00 : Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners

  • ASTM F1138 : Specification for Spray Shields for Mechanical Joints

  • ASTM F113-82(1991) : Method for Stiffness Testing of Wire for Electron Devices and Lamps (Withdrawn 1995)

  • ASTM F1138-98R03 : Specification for Spray Shields for Mechanical Joints

  • ASTM F1139 : Specification for Steam Traps and Drains

  • ASTM F1139-88R04 : Specification for Steam Traps and Drains

  • ASTM F1140 : Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages forMedical Applications

  • ASTM F1140-00 : Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages for Medical Applications

  • ASTM F1141-93R04 : Specification for Wallcovering

  • ASTM F1142 : Specification for Manhole Cover Assembly Bolted, Semi Flush, Oiltight and Watertight

  • ASTM F1142-98R03 : Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

  • ASTM F1143 : Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

  • ASTM F1143-98R03 : Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

  • ASTM F1144 : Specification for Manhole Cover Assembly, Bolted, Semi Flush, Oiltight and Watertight, Hinged

  • ASTM F1144-98R03 : Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

  • ASTM F1145 : Specification for Turnbuckles, Swaged, Welded, Forged

  • ASTM F1145-05 : Specification for Turnbuckles, Swaged, Welded, Forged

  • ASTM F114-69 : Specification for Bone Screw Threads (Withdrawn 1980)

  • ASTM F1146-91 : Specification for Rotary Wing Specialized Medical Transport Units (Withdrawn 2000)

  • ASTM F1147 : Test Method for Tension Testing of Calcium Phosphate and Metal Coatings

  • ASTM F1147-05 : Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

  • ASTM F1148 : Consumer Safety Performance Specification for Home Playground Equipment

  • ASTM F1148-03 : Consumer Safety Performance Specification for Home Playground Equipment

  • ASTM F1149 : Practice for Qualifications, Responsibilities, and Authority of Individuals and InstitutionsProviding Medical Direction of Emergency Medical Services

  • ASTM F1149-93R03 : Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services

  • ASTM F1150 : Specification for Commercial Food Waste Pulper and Waterpress Assembly

  • ASTM F1150-88R00 : Specification for Commercial Food Waste Pulper and Waterpress Assembly

  • ASTM F1151 : Test Method for Determining Variations in Hardness of Film Ribbon Pancakes

  • ASTM F1151-88R03 : Test Method for Determining Variations in Hardness of Film Ribbon Pancakes

  • ASTM F1152 : Test Method for Dimensions of Notches on Silicon Wafers (Withdrawn 2003) NoReplacement

  • ASTM F1152-02 : Test Method for Dimensions of Notches on Silicon Wafers (Withdrawn 2003)

  • ASTM F1153 : Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements

  • ASTM F1153-92(2002) : Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements (Withdrawn 2003)

  • ASTM F1154 : Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of ChemicalProtective Suit Ensembles

  • ASTM F1154-99AR04 : Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles

  • ASTM F1155-98R04 : Practice for Selection and Application of Piping System Materials

  • ASTM F115-69 : Specification for Bone Screw Heads (Withdrawn 1980)

  • ASTM F1156-94 : Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001)

  • ASTM F1157 : Practice for Classifying the Relative Performance of the Physical Properties of Security Seals

  • ASTM F1157-04 : Practice for Classifying the Relative Performance of the Physical Properties of Security Seals

  • ASTM F1158 : Guide for Inspection and Evaluation of Tampering of Security Seals

  • ASTM F1158-94R01 : Guide for Inspection and Evaluation of Tampering of Security Seals

  • ASTM F1159 : Practice for Design and Manufacture of Patron Directed, Arti?cialClimbing Walls, Dry Slide,

  • ASTM F1159-03A : Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures

  • ASTM F116 : Specification for Medical Screwdriver Bits

  • ASTM F1160 : Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and MetallicMedical and Composite Calcium Phosphate/Metallic Coatings

  • ASTM F1160-05 : Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

  • ASTM F1161-88(1994) : Specification for Minimum Performance and Safety Requirements for Components and Systems of Anesthesia Gas Machines (Withdrawn 2000)

  • ASTM F1162 : Specification for Pole Vault Landing Systems

  • ASTM F1162-02 : Specification for Pole Vault Landing Systems

  • ASTM F1163 : Specification for Protective Headgear Used in Horse Sports and Horseback Riding

  • ASTM F1163-04A : Specification for Protective Headgear Used in Horse Sports and Horseback Riding

  • ASTM F1164 : Test Method for Evaluation of Transparent Plastics Exposed to Accelerated WeatheringCombined with Biaxial Stress

  • ASTM F1164-97R03 : Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

  • ASTM F1165 : Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

  • ASTM F1165-98R04 : Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

  • ASTM F1166 : Practice for Human Engineering Design for Marine Systems, Equipment and Facilities

  • ASTM F11-66(1968) : Recommended Practice for Testing Electron Tube Parts by Means of a Reference Planar Diode (Withdrawn 1973)

  • ASTM F1166-95AR00 : Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

  • ASTM F1167-92 : Terminology Relating to Aseptic Packaging (Withdrawn 1993)

  • ASTM F1168-88(1994) : Guide for Use in the Establishment of Thermal Processes for Foods Packaged in Flexible Containers (Withdrawn 2000)

  • ASTM F1169 : Specification for Full Size Baby Crib

  • ASTM F1169-03 : Specification for Full-Size Baby Crib

  • ASTM F1170-88(1993) : Practice for Determining the Performance of a Filter Medium Using Water and Siliceous Particles (Withdrawn 2002)

  • ASTM F1172 : Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

  • ASTM F1172-88R04 : Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

  • ASTM F1173 : Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for MarineApplications

  • ASTM F1173-01 : Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

  • ASTM F1174 : Practice for Using a Personal Computer Printer as a Test Instrument

  • ASTM F1174-01 : Practice for Using a Personal Computer Printer as a Test Instrument

  • ASTM F1175 : Practice for Using the Computer Impact Print Out Unit as a Test Instrument for ManifoldComparison

  • ASTM F1175-88R01 : Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison

  • ASTM F1176 : Practice for Design and Installation of Underground Thermoplastic Irrigation Systems WithMaximum Working Pressure of 125 psi

  • ASTM F1176-01E01 : Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi

  • ASTM F1177 : Terminology Relating to Emergency Medical Services

  • ASTM F1177-02 : Terminology Relating to Emergency Medical Services

  • ASTM F1178-01 : Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

  • ASTM F1179 : Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds withStuds

  • ASTM F117-95(1999)e1 : Test Method for Driving Torque of Medical Bone Screws (Withdrawn 2001)

  • ASTM F1179-88R02 : Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs

  • ASTM F118 : Definitions of Terms Relating to Gaskets

  • ASTM F1181 : Test Method for Measuring Binocular Disparity in Transparent Parts

  • ASTM F1181-96R03 : Test Method for Measuring Binocular Disparity in Transparent Parts

  • ASTM F1182-90R01 : Specification for Anodes, Sacrificial Zinc Alloy

  • ASTM F1183 : Specification for Aluminum Alloy Chain Link Fence Fabric

  • ASTM F1183-96R02 : Specification for Aluminum Alloy Chain Link Fence Fabric

  • ASTM F1184 : Specification for Industrial and Commercial Horizontal Slide Gates

  • ASTM F1184-03 : Specification for Industrial and Commercial Horizontal Slide Gates

  • ASTM F1185 : Specification for Composition of Hydroxylapatite for Surgical Implants

  • ASTM F1185-03 : Specification for Composition of Hydroxylapatite for Surgical Implants

  • ASTM F1186 : Classification System for Chemicals According to Functional Groups

  • ASTM F1186-03 : Classification System for Chemicals According to Functional Groups

  • ASTM F1187-91 : Specification for Fixed Wing Specialized Medical Transport Units (Withdrawn 2000)

  • ASTM F1188 : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption withShort Baseline (Withdrawn 2003) No Replacement

  • ASTM F1188-02 : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption with Short Baseline (Withdrawn 2003)

  • ASTM F1189-88 : Test Method for Using Computer-Assisted Infrared Spectrophotometry to Measure the Interstitial Oxygen Content of Silicon Slices Polished on Both Sides (Withdrawn 1993)

  • ASTM F119 : Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)

  • ASTM F1190 : Guide for Neutron Irradiation of Unbiased Electronic Components

  • ASTM F1190-99R05 : Guide for Neutron Irradiation of Unbiased Electronic Components

  • ASTM F1191-88 : Guide for the Radiation Testing of Semiconductor Memories (Withdrawn 1993)

  • ASTM F1192 : Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy IonIrradiation of Semiconductor Devices

  • ASTM F1192-00 : Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices

  • ASTM F1193 : Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

  • ASTM F1193-04B : Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements

  • ASTM F1194 : Guide for Documenting the Results of Chemical Permeation Testing of Materials Used inProtective Clothing

  • ASTM F1194-99R05 : Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing

  • ASTM F1195 : Specification for Rigid Laryngoscopes for Tracheal Intubation Hook on Fittings forFiberilluminated Blades and Handles

  • ASTM F1195-99 : Specification for Rigid Laryngoscopes for Tracheal Intubation\MHook on Fittings for Fiberilluminated Blades and Handles

  • ASTM F1196 : Specification for Sliding Watertight Door Assemblies

  • ASTM F1196-00 : Specification for Sliding Watertight Door Assemblies

  • ASTM F1197 : Specification for Sliding Watertight Door Control Systems

  • ASTM F1197-00 : Specification for Sliding Watertight Door Control Systems

  • ASTM F1198 : Guide for Shipboard Fire Detection Systems

  • ASTM F1198-92R02 : Guide for Shipboard Fire Detection Systems

  • ASTM F1199 : Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150psig and 150°F Maximum)

  • ASTM F1199-88R04 : Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150|SDF Maximum)

  • ASTM F1200 : Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

  • ASTM F1200-88R04 : Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150|SDF)

  • ASTM F1201 : Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

  • ASTM F1201-88R04 : Specification for Fluid Conditioner Fittings in Piping Applications Above 0|SDF

  • ASTM F1202 : An American National Standard Standard Specification for Washing Machines, Heat Sanitizing,

  • ASTM F1202-97 : Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type

  • ASTM F1203 : An American National Standard Standard Specification for Washing Machines/Pot, Pan, and Utensil,

  • ASTM F1203-97 : Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type

  • ASTM F1204 : Specification for Anesthesia Reservoir Bags

  • ASTM F1204-88(1998) : Specification for Anesthesia Reservoir Bags (Withdrawn 2002)

  • ASTM F1205 : Specification for Anesthesia Breathing Tubes

  • ASTM F1205-88R99 : Specification for Anesthesia Breathing Tubes

  • ASTM F1206 : Test Method for Evaluating Color Image Output from Color Printers and Copiers

  • ASTM F1206-94R00 : Test Method for Evaluating Color Image Output from Color Printers and Copiers

  • ASTM F1207-89 : Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems (Withdrawn 1997)

  • ASTM F1207M : Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in ActiveElectrical Systems [Metric]

  • ASTM F1207M-96R02 : Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems \[Metric\]

  • ASTM F1208 : Specification for Minimum Performance and Safety Requirements for Anesthesia BreathingSystems

  • ASTM F120-88 : Practices for Determination of the Concentration of Impurities in Single Crystal Semiconductor Materials by Infrared Absorption Spectroscopy (Withdrawn 1993)

  • ASTM F1208-89R05 : Specification for Minimum Performance and Safety Requirements for Anesthesia Breathing Systems

  • ASTM F1209-89R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

  • ASTM F1210-89R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

  • ASTM F1211 : Specification for Semiconductor Device Passivation Opening Layouts

  • ASTM F1211-89R01 : Specification for Semiconductor Device Passivation Opening Layouts

  • ASTM F1212 : Test Method for Thermal Stability Testing of Gallium Arsenide Wafers

  • ASTM F1212-89R02 : Test Method for Thermal Stability Testing of Gallium Arsenide Wafers

  • ASTM F1213-89 : Test Method for Determining the Particle Contamination and Media Migration Characteristics of Liquid Filters by Optical Microscopy (Withdrawn 1998)

  • ASTM F1214-89 : Test Method for Water Solubility in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 1998)

  • ASTM F1215-89 : Test Method for Determining the Initial Efficiency of a Flatsheet Filter Medium in an Airflow Using Latex Spheres (Withdrawn 1998)

  • ASTM F1216 : An American National Standard Standard Practice for Rehabilitation of Existing Pipelines and Conduitsby theInversion and Curing of a Resin-Impregnated Tube1, 2

  • ASTM F1216-03 : Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

  • ASTM F1217-03 : Specification for Cooker, Steam

  • ASTM F1218 : Specification for Bronchoscopes (Rigid)

  • ASTM F121-83 : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1990)

  • ASTM F1218-89R99 : Specification for Bronchoscopes (Rigid)

  • ASTM F1219 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial andDetailed Assessment (Withdrawn 2006) No Replacement

  • ASTM F1219-00 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial and Detailed Assessment (Withdrawn 2006)

  • ASTM F1220 : Guide for Emergency Medical Services System (EMSS) Telecommunications

  • ASTM F1220-95R01 : Guide for Emergency Medical Services System (EMSS) Telecommunications

  • ASTM F1221 : Guide for Interagency Information Exchange

  • ASTM F1221-89R01 : Guide for Interagency Information Exchange

  • ASTM F1222-89(1994) : Classification for Hardware for Wood Fencing (Withdrawn 2000)

  • ASTM F1223 : Test Method for Determination of Total Knee Replacement Constraint

  • ASTM F1223-05 : Test Method for Determination of Total Knee Replacement Constraint

  • ASTM F1224 : Guide for Providing System Evaluation for Emergency Medical Services

  • ASTM F1224-89R04E01 : Guide for Providing System Evaluation for Emergency Medical Services

  • ASTM F1225 : Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

  • ASTM F1225-99R03 : Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges

  • ASTM F1226-89(1994)e1 : Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)

  • ASTM F122-74(1985) : Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1990)

  • ASTM F1227-89(1999) : Test Method for Total Mass Loss of Materials and Condensation of Outgassed Volatiles on Microelectronics-Related Substrates (Withdrawn 2000)

  • ASTM F1228-89(1994)E01 : Test Method for Oxidizable (Organic) Carbon on Wafer Surfaces (By Persulfate) (Withdrawn 2001)

  • ASTM F1229 : Guide for the Qualification and Training of EMS Air Medical Patient Care Providers

  • ASTM F1229-01 : Guide for the Qualification and Training of EMS Air Medical Patient Care Providers

  • ASTM F1230-89 : Specification for Minimum Performance Requirements for Emergency Medical Service (EMS) Ground Vehicles (Withdrawn 1997)

  • ASTM F1231-89R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks

  • ASTM F1232 : Practice for Generating a Test Pattern for Single Pass Film Ribbons

  • ASTM F1232-98R03 : Practice for Generating a Test Pattern for Single-Pass Film Ribbons

  • ASTM F1233 : Test Method for Security Glazing Materials And Systems

  • ASTM F1233-98R04 : Test Method for Security Glazing Materials And Systems

  • ASTM F1234-93 : Specification for Protective Coatings on Steel Framework for Fences (Withdrawn 1995)

  • ASTM F1235-03 : Consumer Safety Specification for Portable Hook-On Chairs

  • ASTM F1236 : Guide for Visual Inspection of Electrical Protective Rubber Products

  • ASTM F1236-96R01 : Guide for Visual Inspection of Electrical Protective Rubber Products

  • ASTM F1237 : Specification for Commercial Dishwashing Machines, Multiple Tank, Continuous OvalConveyor Type, Heat Sanitizing

  • ASTM F1237-04 : Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing

  • ASTM F1238 : Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

  • ASTM F1238-95R03 : Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications

  • ASTM F1239 : Test Methods for Oxygen Precipitation Characterization of Silicon Wafers by Measurement ofInterstitial Oxygen Reduction (Withdrawn 2003) No Replacement

  • ASTM F1239-02 : Test Methods for Oxygen Precipitation Characterization of Silicon Wafers by Measurement of Interstitial Oxygen Reduction (Withdrawn 2003)

  • ASTM F123-91 : Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption (Withdrawn 1992)

  • ASTM F124- : Test Method for Coincident Current Memory Core Stacks (Withdrawn 1976)

  • ASTM F1240 : Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces Accordingto Slip Resistance Test Results

  • ASTM F1240-01 : Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results

  • ASTM F1241 : Terminology of Silicon Technology

  • ASTM F1241-95(2000) : Terminology of Silicon Technology (Withdrawn 2003)

  • ASTM F1242 : Specification for Cuffed and Uncuffed Tracheal Tubes

  • ASTM F1242-96e1 : Specification for Cuffed and Uncuffed Tracheal Tubes (Withdrawn 2002)

  • ASTM F1243 : Specification for Tracheal Tube Connectors

  • ASTM F1243-89(1995) : Specification for Tracheal Tube Connectors (Withdrawn 2002)

  • ASTM F1244 : Specification for Berths, Marine

  • ASTM F1244-89R04 : Specification for Berths, Marine

  • ASTM F1245 : Specification for Faucets, Single and Double, Compression and Self Closing Type, Shipboard

  • ASTM F1245-89R01 : Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

  • ASTM F1246 : Specification for Electrically Powered Home Care Ventilators, Part 1 Positive PressureVentilators and Ventilator Circuits

  • ASTM F1246-91R99 : Specification for Electrically Powered Home Care Ventilators, Part 1\MPositive-Pressure Ventilators and Ventilator Circuits

  • ASTM F1247 : Specification for Intrusion Resistant Generic Vault Structures

  • ASTM F1247-89R05 : Specification for Intrusion Resistant Generic Vault Structures

  • ASTM F1248 : Test Method for Determination of Environmental Stress Crack Resistance (ESCR) ofPolyethylene Pipe

  • ASTM F1248-96R02E01 : Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe

  • ASTM F1249 : Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using aModulated Infrared Sensor

  • ASTM F1249-01 : Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

  • ASTM F125- : Method of Test for Non-Metallic Magnetic Cores to be Used in a Linear Select Memory with a Non-Symetrical Ratio Operation Under Full Switching Conditions (Withdrawn 1976)

  • ASTM F1250 : Safety Specification for Stationary Exercise Bicycles

  • ASTM F1250-00 : Safety Specification for Stationary Exercise Bicycles

  • ASTM F1251 : Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices

  • ASTM F1251-89R03 : Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices

  • ASTM F1252-89R02 : Test Method for Measuring Optical Reflectivity of Transparent Materials

  • ASTM F1253-90 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Secondary Assessment (Withdrawn 1999)

  • ASTM F1254 : Practice for Performance of Prehospital Manual Defibrillation

  • ASTM F1254-90R01 : Practice for Performance of Prehospital Manual Defibrillation

  • ASTM F1255 : Practice for Performance of Prehospital Automated Defibrillation

  • ASTM F1255-90R02 : Practice for Performance of Prehospital Automated Defibrillation

  • ASTM F1256 : Guide for Selection and Practice of Emergency Medical Services Instructor for Basic LifeSupport/Emergency Medical Technician (BLS/EMT) Training Programs

  • ASTM F1256-90R02 : Guide for Selection and Practice of Emergency Medical Services Instructor for Basic Life Support/Emergency Medical Technician (BLS/EMT) Training Programs

  • ASTM F1257 : Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced LifeSupport/Emergency Medical Technician (ALS/EMT) Training Programs

  • ASTM F1257-90R02 : Guide for Selection and Practice of Emergency Medical Services Instructor for Advanced Life Support/Emergency Medical Technician (ALS/EMT) Training Programs

  • ASTM F1258 : Practice for Emergency Medical Dispatch

  • ASTM F1258-95R01 : Practice for Emergency Medical Dispatch

  • ASTM F1259-89 : Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration

  • ASTM F1259M : Guide for Design of Flat, Straight Line Test Structures for Detecting Metallization OpenCircuit or Resistance Increase Failure Due to Electromigration [Metric]

  • ASTM F1259M-96R03 : Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration \[Metric\]

  • ASTM F126- : Definitions of Terms Relating to Which Relate to the Use and Testing of Ferrite Memory Cores and Memory Core Arrays (Withdrawn 1976)

  • ASTM F1260-89 : Test Method for Estimating Electromigration Median Time-To-Failure and Sigma of Integrated Circuit Metallizations

  • ASTM F1260M : Test Method for Estimating Electromigration Median Time to Failure and Sigma ofIntegrated Circuit Metallizations [Metric]

  • ASTM F1260M-96R03 : Test Method for Estimating Electromigration Median Time-To-Failure and Sigma of Integrated Circuit Metallizations \[Metric\]

  • ASTM F1261M : Test Method for Determining the Average Electrical Width of a Straight, Thin Film Metal Line[Metric]

  • ASTM F1261M-96R03 : Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line \[Metric\]

  • ASTM F1262M : Guide for Transient Radiation Upset Threshold of Digital Integrated Circuits

  • ASTM F1262M-95R02 : Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits [Metric]

  • ASTM F1263 : Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

  • ASTM F1263-99R05 : Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

  • ASTM F1264 : Specification and Test Methods for Intramedullary Fixation Devices

  • ASTM F1264-03 : Specification and Test Methods for Intramedullary Fixation Devices

  • ASTM F1265 : Test Method for Resistance to Impact for Resilient Floor Tile

  • ASTM F1265-03A : Test Method for Resistance to Impact for Resilient Floor Tile

  • ASTM F1266 : Performance Specification for Cerebral Stereotactic Instruments

  • ASTM F1266-89R02 : Performance Specification for Cerebral Stereotactic Instruments

  • ASTM F1267 : Specification for Metal, Expanded, Steel

  • ASTM F1267-01 : Specification for Metal, Expanded, Steel

  • ASTM F1268 : Guide for Establishing and Operating a Public Information, Education, and RelationsProgram for Emergency Medical Service Systems

  • ASTM F12-68(1978) : Specification for Mica Bridges for Electron Tubes (Withdrawn 1984)

  • ASTM F1268-90R03 : Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems

  • ASTM F1269-89R01 : Test Methods for Destructive Shear Testing of Ball Bonds

  • ASTM F1270 : Practice for Preparing and Locating Emergency Muster Lists

  • ASTM F1270-97R02 : Practice for Preparing and Locating Emergency Muster Lists

  • ASTM F1271 : Specification for Spill Valves for Use in Marine Tank Liquid Overpressure ProtectionsApplications

  • ASTM F1271-90R01 : Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

  • ASTM F1273 : Specification for Tank Vent Flame Arresters

  • ASTM F1273-91R02 : Specification for Tank Vent Flame Arresters

  • ASTM F1274-91 : Specification for Fixed Wing Advanced Life Support Transport Units (Withdrawn 2000)

  • ASTM F1275 : Test Method for Performance of Griddles

  • ASTM F1275-03E01 : Test Method for Performance of Griddles

  • ASTM F1276 : Test Method for Creep Relaxation of Laminated Composite Gasket Materials

  • ASTM F1276-99R03 : Test Method for Creep Relaxation of Laminated Composite Gasket Materials

  • ASTM F1277 : Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials byIon Selective Electrode Technique

  • ASTM F1277-02 : Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique

  • ASTM F1278 : Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

  • ASTM F127-84 : Definitions of Terms Relating to Relating to Photomasking Technology for Microelectronics (Withdrawn 1993)

  • ASTM F1278-96R03 : Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

  • ASTM F1279-90R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Permeable Surfaces

  • ASTM F1280 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater andOther Inland Environments, Impermeable Surfaces

  • ASTM F1280-90R99 : Guide for Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and Other Inland Environments, Impermeable Surfaces

  • ASTM F1281 : Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX AL PEX) Pressure Pipe

  • ASTM F1281-03 : Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

  • ASTM F1282 : Specification for Polyethylene/Aluminum/Polyethylene (PE AL PE) Composite Pressure Pipe

  • ASTM F1282-03 : Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

  • ASTM F1283-91 : Specification for Fixed Wing Specialized Medical Transport Units (Withdrawn 2000)

  • ASTM F1284-04 : Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems

  • ASTM F1285 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient ExaminationTechniques

  • ASTM F1285-90R03 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Examination Techniques

  • ASTM F1286 : Guide for Development and Operation of Level 1 Pediatric Trauma Facilities

  • ASTM F128-66(1983) : Methods of Testing Sleeves and Tubing for Electron Tube Cathodes (Withdrawn 1992)

  • ASTM F1286-90R02 : Guide for Development and Operation of Level 1 Pediatric Trauma Facilities

  • ASTM F1287 : Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care

  • ASTM F1287-90R02 : Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care

  • ASTM F1288 : Guide for Planning for and Response to a Multiple Casualty Incident

  • ASTM F1288-90R03 : Guide for Planning for and Response to a Multiple Casualty Incident

  • ASTM F1289-95 : Practice for Development of Literature Pertaining to the Selection of Residential Resilient Floor Coverings (Withdrawn 2000)

  • ASTM F129 : Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than FabricType

  • ASTM F1290 : Practice for Electrofusion Joining Polyolefin Pipe and Fittings

  • ASTM F1290-98AR04 : Practice for Electrofusion Joining Polyolefin Pipe and Fittings

  • ASTM F1291 : Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin

  • ASTM F1291-04 : Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin

  • ASTM F1292-04 : Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment

  • ASTM F1293-91A : Test Method for Evaluation of Coated Transparent Plastics Subjected to Cyclic Flexural/Thermal Fatigue (Withdrawn 2000)

  • ASTM F1294 : Terminology Relating to Automatic Identification Hard Copy Printing Systems

  • ASTM F1294-97AR03 : Terminology Relating to Automatic Identification Hard Copy Printing Systems

  • ASTM F1295 : Specification for Wrought Titanium 6 Aluminum 7 Niobium Alloy for Surgical ImplantApplications (UNS R56700)

  • ASTM F1295-05 : Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

  • ASTM F1296 : Guide for Evaluating Chemical Protective Clothing

  • ASTM F1296-03 : Guide for Evaluating Chemical Protective Clothing

  • ASTM F1297 : Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

  • ASTM F1297-90R05 : Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

  • ASTM F1298 : Specification for Flexible, Expansion Type Ball Joints for Marine Applications

  • ASTM F1298-90R01 : Specification for Flexible, Expansion-Type Ball Joints for Marine Applications

  • ASTM F1299-90 : Specification for Food Service Equipment Hoods for Cooking Appliances (Withdrawn 1997)

  • ASTM F1301 : Practice for Labeling Chemical Protective Clothing

  • ASTM F1301-90R01 : Practice for Labeling Chemical Protective Clothing

  • ASTM F1302-90 : Practice for Abbreviated Marking of Plastic Consumer Products (Withdrawn 1991)

  • ASTM F1303 : Specification for Sheet Vinyl Floor Covering with Backing

  • ASTM F1303-04 : Specification for Sheet Vinyl Floor Covering with Backing

  • ASTM F1304-03 : Test Method for Deflection of Resilient Floor Tile

  • ASTM F1305 : Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses

  • ASTM F1305-94R02 : Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses

  • ASTM F1306 : Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

  • ASTM F1306-90R02 : Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

  • ASTM F1307 : Test Method for Oxygen Transmission Rate Through Dry Packages Using a CoulometricSensor

  • ASTM F1307-02 : Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

  • ASTM F1307-90 : Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor (Withdrawn 2001)

  • ASTM F1308 : Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for FoodProducts

  • ASTM F1308-98R03 : Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products

  • ASTM F1309 : Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

  • ASTM F1309-98R03 : Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

  • ASTM F1310-90 : Specification for 65-Gallon Dispensing Tank (Withdrawn 1996)

  • ASTM F1311 : Specification for Large Diameter Fabricated Carbon Steel Flanges

  • ASTM F1311-90R01 : Specification for Large\NDiameter Fabricated Carbon Steel Flanges

  • ASTM F1312 : Specification for Brick, Insulating, High Temperature, Fire Clay

  • ASTM F1312-90R02 : Specification for Brick, Insulating, High Temperature, Fire Clay

  • ASTM F1313 : Specification for Volatile N Nitrosamine Levels in Rubber Nipples on Pacifiers

  • ASTM F1313-90R99 : Specification for Volatile -Nitrosamine Levels in Rubber Nipples on Pacifiers

  • ASTM F1314 : Specification for Wrought Nitrogen Strengthened 22 Chromium 13 Nickel 5 Manganese2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

  • ASTM F1314-01 : Specification for Wrought Nitrogen Strengthened 22 Chromium \N 13 Nickel \N 5 Manganese \N 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

  • ASTM F1315 : Test Method for Density of a Sheet Gasket Material

  • ASTM F1315-00 : Test Method for Density of a Sheet Gasket Material

  • ASTM F1316 : Test Method for Measuring the Transmissivity of Transparent Parts

  • ASTM F1316-90R02 : Test Method for Measuring the Transmissivity of Transparent Parts

  • ASTM F1317 : Test Method for Calibration of Microwave Ovens

  • ASTM F1317-98R02 : Test Method for Calibration of Microwave Ovens

  • ASTM F1318 : Test Method for Determination of Productivity Using Electrostatic Copy Machines withVarious Configurations

  • ASTM F1318-90R03 : Test Method for Determination of Productivity Using Electrostatic Copy Machines with Various Configurations

  • ASTM F1319 : Test Method for Determination of Abrasion and Smudge Resistance of Images Producedfrom Business Copy Products (Crockmeter Method)

  • ASTM F1319-94R00 : Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method)

  • ASTM F1320 : Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a TestInstrument

  • ASTM F1320-01 : Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument

  • ASTM F1321 : Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) toDetermine the Light Ship Displacement and Centers of Gravity of a Vessel

  • ASTM F1321-92R04 : Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

  • ASTM F1322 : Guide for Selection of Shipboard Incinerators

  • ASTM F1322-90R04 : Guide for Selection of Shipboard Incinerators

  • ASTM F1323-01 : Specification for Shipboard Incinerators

  • ASTM F1325 : Specification for Stainless Steel Suture Needle Holders General Workmanship Requirementsand Corresponding Test Methods

  • ASTM F1325-91R02 : Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods

  • ASTM F1326 : Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners

  • ASTM F1326-02 : Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners

  • ASTM F1327 : Terminology Relating to Barrier Materials for Medical Packaging

  • ASTM F132-70(1981) : Method of Testing Nonmetallic Magnetic Cores to be Used in a Coincident Current Memory with a Two-To-One Selection Ratio Operating Under Full Switching Conditions (Withdrawn 1987)

  • ASTM F1327-98 : Terminology Relating to Barrier Materials for Medical Packaging

  • ASTM F1328 : Guide for Training Emergency Medical Technician (Basic) to Prepare Patients for MedicalTransportation (Withdrawn 2006) No Replacement

  • ASTM F1328-00 : Guide for Training Emergency Medical Technician (Basic) to Prepare Patients for Medical Transportation (Withdrawn 2006)

  • ASTM F1329 : Guide for Training the Emergency Medical Technician (Basic) in Basic Anatomy andPhysiology (Withdrawn 2006) No Replacement

  • ASTM F1329-00 : Guide for Training the Emergency Medical Technician (Basic) in Basic Anatomy and Physiology (Withdrawn 2006)

  • ASTM F1330 : Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

  • ASTM F1330-91R01 : Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

  • ASTM F1331 : Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electricaland Electronic Spaces

  • ASTM F1331-91R02 : Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

  • ASTM F1332 : Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement toIEEE/ASTM SI 10)

  • ASTM F1332-99R05 : Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/SI 10)

  • ASTM F1333 : Specification for Construction of Fire and Foam Station Cabinets

  • ASTM F1333-91R02 : Specification for Construction of Fire and Foam Station Cabinets

  • ASTM F1334-02 : Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners

  • ASTM F1335 : Specification for Pressure Rated Composite Pipe and Fittings for Elevated TemperatureService

  • ASTM F1335-04 : Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service

  • ASTM F1336-02 : Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

  • ASTM F1337-91R01 : Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities

  • ASTM F1338 : Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance andMinimum Scope of Assembly

  • ASTM F1338-91R02 : Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

  • ASTM F1339 : Guide for Organization and Operation of Emergency Medical Services Systems

  • ASTM F1339-92R03 : Guide for Organization and Operation of Emergency Medical Services Systems

  • ASTM F1340-92 : Test Method for Determining the Mean Interface Trap Density of Mosfets by Charge-Pumping (Withdrawn 1997)

  • ASTM F1341 : Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNSR50700, for Surgical Implant Applications

  • ASTM F1341-99 : Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications

  • ASTM F1342 : Test Method for Protective Clothing Material Resistance to Puncture

  • ASTM F1342-05 : Test Method for Protective Clothing Material Resistance to Puncture

  • ASTM F1343 : Specification for Anesthetic Gas Scavenging Systems Transfer and Receiving Systems

  • ASTM F1343-02 : Specification for Anesthetic Gas Scavenging Systems\MTransfer and Receiving Systems

  • ASTM F1343-91 : Specification for Anesthetic Equipment-Scavenging Systems for Anesthetic Gases (Withdrawn 2000)

  • ASTM F1344 : Specification for Rubber Floor Tile

  • ASTM F1344-04 : Specification for Rubber Floor Tile

  • ASTM F1345 : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Steel Chain Link Fence Fabric

  • ASTM F1345-96R03 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

  • ASTM F1346 : Performance Specification for Safety Covers and Labeling Requirements for All Covers forSwimming Pools, Spas and Hot Tubs

  • ASTM F1346-91R03 : Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs

  • ASTM F1347 : Specification for Manually Operated Fueling Hose Reels

  • ASTM F1347-91R01 : Specification for Manually Operated Fueling Hose Reels

  • ASTM F1348/F1348M : Specification for Pneumatic Rotary Descaling Machines

  • ASTM F1348/F1348M-91R02 : Specification for Pneumatic Rotary Descaling Machines

  • ASTM F134-85(1990) : Test Methods for Determining Hermeticity of Electron Devices with a Helium Mass Spectrometer Leak Detector (Withdrawn 1996)

  • ASTM F1349 : Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from MicrowaveSusceptors

  • ASTM F1349-98R03 : Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

  • ASTM F1350 : Specification for Wrought 18 Chromium 14 Nickel 2.5 Molybdenum Stainless Steel SurgicalFixation Wire (UNS S31673)

  • ASTM F1350-02 : Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)

  • ASTM F1351 : Practice for Determination of the Effect of Hard Creasing Paper on Images Produced byBusiness Imaging Systems

  • ASTM F1351-96R02 : Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems

  • ASTM F1352-02 : Guide for Fixed Blade Broadhead Performance and Safety Standards

  • ASTM F1353-92 : Specification for Frozen Finely Ground Chicken (Withdrawn 1995)

  • ASTM F1354-92 : Specification for Frozen Precooked Imitation Crab Products (Withdrawn 1995)

  • ASTM F1355 : Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment

  • ASTM F1355-99 : Guide for Irradiation of Fresh Fruits as a Phytosanitary Treatment

  • ASTM F1356 : An American National Standard Standard Practice for Irradiation of Fresh and Frozen Red Meat and

  • ASTM F1356-99 : Guide for Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms

  • ASTM F1357 : Specification for Articulating Total Wrist Implants

  • ASTM F135-76(1991) : Test Method for Embedment Stress Caused by Casting Compounds on Glass-Encased Electronic Components (Withdrawn 1997)

  • ASTM F1357-99R04 : Specification for Articulating Total Wrist Implants

  • ASTM F1358 : Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing NotDesignated Primarily for Flame Resistance

  • ASTM F1358-00R05 : Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance

  • ASTM F1359 : Test Method for Liquid Penetration Resistance of Protective Clothing or ProtectiveEnsembles Under a Shower Spray While on a Mannequin

  • ASTM F1359-99AR04 : Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin

  • ASTM F136 : Specification for Wrought Titanium 6 Aluminum 4 Vanadium ELI (Extra Low Interstitial) Alloyfor Surgical Implant Applications (UNS R56401)

  • ASTM F1360 : Specification for Ovens, Microwave, Electric

  • ASTM F1360-93R99 : Specification for Ovens, Microwave, Electric

  • ASTM F1361-99E01 : Test Method for Performance of Open Deep Fat Fryers

  • ASTM F1362 : Test Method for Shear Strength and Shear Modulus of Aerospace Glazing InterlayerMaterials

  • ASTM F1362-97R03 : Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

  • ASTM F1363-02 : Guide for Reduction of Risk of Injury for Archery Overdraws

  • ASTM F1364 : Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of anInterferometric Laser Imaging Nondestructive Tire Inspection System

  • ASTM F1364-03 : Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System

  • ASTM F1365 : Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints WhichUse Flexible Elastomeric Seals

  • ASTM F13-65(1971) : Specification for Disk Cathode Assemblies (Withdrawn 1979)

  • ASTM F1365-91R99E01 : Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals

  • ASTM F1366 : Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates bySecondary Ion Mass Spectrometry (Withdrawn 2003) No Replacement

  • ASTM F1366-92(2002) : Test Method for Measuring Oxygen Concentration in Heavily Doped Silicon Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F1367 : Specification for Chromium Sputtering Targets for Thin Film Applications

  • ASTM F1367-98R03 : Specification for Chromium Sputtering Targets for Thin Film Applications

  • ASTM F1368-92 : Test Method for Determining the Sieving Performance of a Fluid Filter Medium Employing an Aqueous Suspension of Microspheres and a Spectrophotometer (Withdrawn 2001)

  • ASTM F1369-93a : Specification for Heaters, Convection, Steam and Hot Water (Withdrawn 2002)

  • ASTM F137 : Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

  • ASTM F1370 : Specification for Pressure Reducing Valves for Water Systems, Shipboard

  • ASTM F1370-92R05 : Specification for Pressure-Reducing Valves for Water Systems, Shipboard

  • ASTM F1371 : Specification for Vegetable Peeling Machines, Electric

  • ASTM F1371-04 : Specification for Vegetable Peeling Machines, Electric

  • ASTM F1372 : Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Conditionfor Gas Distribution System Components

  • ASTM F1372-93R05 : Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

  • ASTM F1373 : Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution SystemComponents

  • ASTM F1373-93R05 : Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components

  • ASTM F1374 : Test Method for Ionic/Organic Extractables of Internal Surfaces IC/GC/FTIR for GasDistribution System Components

  • ASTM F1374-92R05 : Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components

  • ASTM F1375 : Test Method for Energy Dispersive X Ray Spectrometer (EDX) Analysis of Metallic SurfaceCondition for Gas Distribution System Components

  • ASTM F1375-92R05 : Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

  • ASTM F1376 : Guide for Metallurgical Analysis for Gas Distribution System Components

  • ASTM F1376-92R05 : Guide for Metallurgical Analysis for Gas Distribution System Components

  • ASTM F1377 : Specification for Cobalt 28Chromium 6Molybdenum Powder for Coating of OrthopedicImplants (UNS R30075)

  • ASTM F1377-04 : Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

  • ASTM F1378-04 : Specification for Shoulder Prostheses

  • ASTM F1379 : Terminology Relating to Barbed Tape

  • ASTM F1379-95R03 : Terminology Relating to Barbed Tape

  • ASTM F138 : Specification for Wrought 18 Chromium 14 Nickel 2.5 Molybdenum Stainless Steel Bar andWire for Surgical Implants (UNS S31673)

  • ASTM F1380 : Specification for Metal Insert Fittings for Polybutylene (PB) Tubing

  • ASTM F1380-95AR02E01 : Specification for Metal Insert Fittings for Polybutylene (PB) Tubing

  • ASTM F1381 : Guide for Planning and Developing 9 1 1 Enhanced Telephone Systems

  • ASTM F1381-92R03 : Guide for Planning and Developing 9-1-1 Enhanced Telephone Systems

  • ASTM F1382 : Specification for Search and Rescue Computer Software Information Exchange (Withdrawn2002) No Replacement

  • ASTM F1382-92(1997) : Specification for Search and Rescue Computer Software Information Exchange (Withdrawn 2002)

  • ASTM F1383-99A : Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Intermittent Contact

  • ASTM F1384-93 : Practice for Fire Tests of Marine Joiner Doors Assembly (Withdrawn 2002)

  • ASTM F1385 : Practice for Platforms in Cargo Tanks

  • ASTM F1385-01 : Practice for Platforms in Cargo Tanks

  • ASTM F1386 : Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding

  • ASTM F1386-92R04 : Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding

  • ASTM F1387 : Specification for Performance of Piping and Tubing Mechanically Attached Fittings

  • ASTM F1387-99R05 : Specification for Performance of Piping and Tubing Mechanically Attached Fittings

  • ASTM F1388 : Test Method for Generation Lifetime and Generation Velocity of Silicon Material byCapacitance Time Measurements of Metal Oxide Silicon (MOS) Capacitors (Withdrawn 2003) NoReplacement

  • ASTM F1388-92(2000) : Test Method for Generation Lifetime and Generation Velocity of Silicon Material by Capacitance-Time Measurements of Metal-Oxide-Silicon (MOS) Capacitors (Withdrawn 2003)

  • ASTM F1389 : Test Methods for Photoluminescence Analysis of Single Crystal Silicon for III-V Impurities

  • ASTM F1389-00 : Test Methods for Photoluminescence Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003)

  • ASTM F139 : Specification for Wrought 18 Chromium 14 Nickel 2.5 Molybdenum Stainless Steel Sheet andStrip for Surgical Implants (UNS S31673)

  • ASTM F1390 : Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning(Withdrawn 2003) No Replacement

  • ASTM F1390-02 : Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning (Withdrawn 2003)

  • ASTM F1391 : Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption(Withdrawn 2003) No Replacement

  • ASTM F1391-93(2000) : Test Method for Substitutional Atomic Carbon Content of Silicon by Infrared Absorption (Withdrawn 2003)

  • ASTM F1392 : Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by CapacitanceVoltage Measurements With a Mercury Probe (Withdrawn 2003) No Replacement

  • ASTM F1392-02 : Test Method for Determining Net Carrier Density Profiles in Silicon Wafers by Capacitance-Voltage Measurements With a Mercury Probe (Withdrawn 2003)

  • ASTM F1393 : Test Method for Determining Net Carrier Density in Silicon Wafers by Miller FeedbackProfiler Measurements With a Mercury Probe (Withdrawn 2003) No Replacement

  • ASTM F1393-02 : Test Method for Determining Net Carrier Density in Silicon Wafers by Miller Feedback Profiler Measurements With a Mercury Probe (Withdrawn 2003)

  • ASTM F1394 : Test Method for Determination of Particle Contribution from Gas Distribution System Valves

  • ASTM F1394-92R05 : Test Method for Determination of Particle Contribution from Gas Distribution System Valves

  • ASTM F1396 : Test Method for Determination of Oxygen Contribution by Gas Distribution SystemComponents

  • ASTM F1396-93R05 : Test Method for Determination of Oxygen Contribution by Gas Distribution System Components

  • ASTM F1397 : Test Method for Determination of Moisture Contribution by Gas Distribution SystemComponents

  • ASTM F1397-93R05 : Test Method for Determination of Moisture Contribution by Gas Distribution System Components

  • ASTM F1398 : Test Method for Determination of Total Hydrocarbon Contribution by Gas DistributionSystem Components

  • ASTM F1398-93R05 : Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components

  • ASTM F14 : Practice for Making and Testing Reference Glass Metal Bead Seal

  • ASTM F140 : Practice for Making Reference Glass Metal Butt Seals and Testing for ExpansionCharacteristics by Polarimetric Methods

  • ASTM F1404 : Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique

  • ASTM F1404-92R99 : Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique

  • ASTM F1405 : Test Method for Determining the Dynamic Thermal Response of Direct Thermal ImagingProducts Atlantek Method

  • ASTM F1405-98R02 : Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products\MAtlantek Method

  • ASTM F1406-92 : Specification for Breaded, Cooked, Frozen Chicken Patties and Nuggets (Withdrawn 1995)

  • ASTM F1407 : Test Method for Resistance of Chemical Protective Clothing Materials to Liquid PermeationPermeation Cup Method

  • ASTM F1407-99A : Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation\MPermeation Cup Method

  • ASTM F1408 : Practice for Subcutaneous Screening Test for Implant Materials

  • ASTM F1408-97R02E01 : Practice for Subcutaneous Screening Test for Implant Materials

  • ASTM F1409 : Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets

  • ASTM F1409-00R05 : Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets

  • ASTM F141 : Terminology Relating to Resilient Floor Coverings

  • ASTM F1410 : Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners

  • ASTM F1410-98R03 : Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners

  • ASTM F1411-01 : Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use

  • ASTM F1412-01E01 : Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

  • ASTM F1413 : Guide for Oil Spill Dispersant Application Equipment : Boom and Nozzle Systems

  • ASTM F1413-92R99 : Guide for Oil Spill Dispersant Application Equipment : Boom and Nozzle Systems

  • ASTM F1414 : Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing

  • ASTM F1414-04 : Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing

  • ASTM F1415 : Specification for Pulse Oximeters (Withdrawn 2005) Replaced by ISO9919 0 ASTM 0

  • ASTM F1415-92(2000) : Specification for Pulse Oximeters (Withdrawn 2005)

  • ASTM F1416 : Guide for Selection of Time Temperature Indicators

  • ASTM F1416-96R03 : Guide for Selection of Time-Temperature Indicators

  • ASTM F1417-92R98 : Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air

  • ASTM F1418 : Guide for Training the Emergency Medical Technician (Basic) in Roles and Responsibilities

  • ASTM F1418-01 : Guide for Training the Emergency Medical Technician (Basic) in Roles and Responsibilities

  • ASTM F1419 : Guide for Training the Emergency Medical Technician (Basic) To Manage Shock (Withdrawn2006) No Replacement

  • ASTM F1419-00 : Guide for Training the Emergency Medical Technician (Basic) To Manage Shock (Withdrawn 2006)

  • ASTM F142 : Test Method for Indentation of Resilient Floor Tiles (McBurney Test)

  • ASTM F1420 : Guide for Training the Emergency Medical Technician (Basic) to Perform PatientManagement Techniques

  • ASTM F1420-01 : Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Management Techniques

  • ASTM F1421 : Guide for Training the Emergency Medical Technician (Basic) To Manage ObstetricalEmergencies

  • ASTM F1421-01 : Guide for Training the Emergency Medical Technician (Basic) To Manage Obstetrical Emergencies

  • ASTM F1422 : Guide for Using the Incident Command System Framework in Managing Civilian Search andRescue Operations

  • ASTM F1422-92R99 : Guide for Using the Incident Command System Framework in Managing Civilian Search and Rescue Operations

  • ASTM F1423 : Practice for Determination of the Quality of Monochrome Images Produced from Non ImpactPersonal Computer Printers

  • ASTM F1423-97R02 : Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers

  • ASTM F1424 : Test Method for Estimating Toner Usage in Full Color Copiers Utilizing Dry Mono or DualComponent Toners

  • ASTM F1424-92R01 : Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono-or-Dual-Component Toners

  • ASTM F1425 : Test Method for Determining the Tribocharge of Two Component Developer Materials

  • ASTM F1425-92R01 : Test Method for Determining the Tribocharge of Two-Component Developer Materials

  • ASTM F1426 : Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use

  • ASTM F1426-94R03 : Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use

  • ASTM F1427 : Consumer Safety Specification for Bunk Beds

  • ASTM F1427-04E01 : Consumer Safety Specification for Bunk Beds

  • ASTM F1428 : Specification for Aluminum Particle Filled Basecoat/Organic or Inorganic Topcoat, CorrosionProtective Coatings for Fasteners

  • ASTM F1428-92R99 : Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

  • ASTM F1429 : Test Method for Assembly Force of Plastic Underground Conduit Joints That Use FlexibleElastomeric Seals Located in the Bell

  • ASTM F1429-99 : Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

  • ASTM F1430 : Test Method for Acoustic Emission Testing of Insulated and Non Insulated Aerial PersonnelDevices with Supplemental Load Handling Attachments

  • ASTM F1430-03 : Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

  • ASTM F1431 : Specification for Water Trap for Diesel Exhaust

  • ASTM F1431-92R04 : Specification for Water Trap for Diesel Exhaust

  • ASTM F1433 : Specification for Mechanically Refrigerated Shipboard Air Conditioner

  • ASTM F1433-97R04 : Specification for Mechanically Refrigerated Shipboard Air Conditioner

  • ASTM F1434 : Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

  • ASTM F1434-97R02 : Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

  • ASTM F1435-04 : Specification for Designation of the Balance Point Location for Archery Arrows

  • ASTM F1436-02 : Guide for Center Serving Diameter Dimensions for Archery Bow Strings

  • ASTM F1437 : Practice for Inclined Cargo Tank Ladders

  • ASTM F1437-01 : Practice for Inclined Cargo Tank Ladders

  • ASTM F143-73(1978) : Method of Test for Thickness of Epitaxial Layers of Silicon by Measurement of Stacking Fault Dimension (Withdrawn 1985)

  • ASTM F1438 : Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy forGas Distribution System Components

  • ASTM F1438-93R05 : Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components

  • ASTM F1439 : Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of ImplantMaterials

  • ASTM F1439-03 : Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials

  • ASTM F144 : Practice for Making Reference Glass Metal Sandwich Seal and Testing for ExpansionCharacteristics by Polarimetric Methods

  • ASTM F1440 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty FemoralComponents Without Torsion

  • ASTM F1440-92R02 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion

  • ASTM F1441 : Specification for Soft Tissue Expander Devices

  • ASTM F1441-03 : Specification for Soft-Tissue Expander Devices

  • ASTM F1442 : Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance

  • ASTM F1442-92R03 : Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance

  • ASTM F1443 : Practice for Using 0.008 in. (0.203 mm) Aperture Reflectometers as Test Instruments forMeasuring Visual Image Quality of Business Copy Images

  • ASTM F1443-93R03 : Practice for Using 0.008-in. (0.203-mm) Aperture Reflectometers as Test Instruments for Measuring Visual Image Quality of Business Copy Images

  • ASTM F1444 : Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper LabelPrinter Method

  • ASTM F1444-00R04 : Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method

  • ASTM F1445 : Test Method for Determining Static Thermal Sensitivity of Direct Thermal Paper

  • ASTM F1445-00R04 : Test Method for Determining Static Thermal Sensitivity of Direct Thermal Media

  • ASTM F1446 : Test Methods for Equipment and Procedures Used in Evaluating the PerformanceCharacteristics of Protective Headgear

  • ASTM F1446-04 : Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

  • ASTM F1447-02 : Specification for Helmets Used in Recreational Bicycling or Roller Skating

  • ASTM F1448 : Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration,

  • ASTM F1448-93AR99 : Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents

  • ASTM F1449 : Guide for Care and Maintenance of Flame, Thermally and Arc Resistant Clothing

  • ASTM F1449-01 : Guide for Care and Maintenance of Flame, Thermal and Arc Resistant Clothing

  • ASTM F145 : Practice for Evaluating Flat Faced Gasketed Joint Assemblies

  • ASTM F1450-05 : Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

  • ASTM F1451 : Test Method for Measuring Sori on Silicon Wafers by Automated Noncontact Scanning(Withdrawn 2003) No Replacement

  • ASTM F1451-92(1999) : Test Method for Measuring Sori on Silicon Wafers by Automated Noncontact Scanning (Withdrawn 2003)

  • ASTM F1452 : Specification for Minimum Performance and Safety Requirements for Anesthetic GasMonitors Replaced by ANSI/ISO21647

  • ASTM F1452-01 : Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors

  • ASTM F1453 : Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care

  • ASTM F1453-92R03 : Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care

  • ASTM F1454 : Practice for Comparing Correctable Film Ribbons

  • ASTM F1454-99R03 : Practice for Comparing Correctable Film Ribbons

  • ASTM F1455 : Guide for Selection of Structural Details for Ship Construction

  • ASTM F1455-92R01 : Guide for Selection of Structural Details for Ship Construction

  • ASTM F1456 : Specification for Minimum Performance and Safety Requirements for Capnometers Replacedby ANSI/ISO21647

  • ASTM F1456-01 : Specification for Minimum Performance and Safety Requirements for Capnometers

  • ASTM F1457 : Terminology Relating to Laser Printers

  • ASTM F1457-94BR01 : Terminology Relating to Laser Printers

  • ASTM F1458 : Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices

  • ASTM F1458-04 : Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices

  • ASTM F1459 : Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen GasEmbrittlement (HGE)

  • ASTM F1459-93R98E01 : Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement

  • ASTM F146 : Test Methods for Fluid Resistance of Gasket Materials

  • ASTM F1460 : Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

  • ASTM F1460-93R99 : Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

  • ASTM F1461 : Practice for Chemical Protective Clothing Program

  • ASTM F1461-93R05E01 : Practice for Chemical Protective Clothing Program

  • ASTM F1462 : Specification for Oxygen Analyzers

  • ASTM F1462-93 : Specification for Oxygen Analyzers (Withdrawn 2002)

  • ASTM F1463 : Specification for Alarm Signals in Medical Equipment Used in Anesthesia and RespiratoryCare (Withdrawn 2006) Replaced by ISO/IEC

  • ASTM F1463-93R99 : Specification for Alarm Signals in Medical Equipment Used in Anesthesia and Respiratory Care

  • ASTM F1464 : Specification for Oxygen Concentrators for Domiciliary Use

  • ASTM F1464-93R99 : Specification for Oxygen Concentrators for Domiciliary Use

  • ASTM F1465 : Guide for Selection of Security Control Systems

  • ASTM F1465-03 : Guide for Selection of Security Control Systems

  • ASTM F1466 : Specification for Iron Nickel Cobalt Alloys for Metal to Ceramic Sealing Applications

  • ASTM F1466-99R05 : Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

  • ASTM F1467 : Guide for Use of an X Ray Tester ([approximate]10 keV Photons) in Ionizing RadiationEffects Testing of Semiconductor Devices and Microcircuits

  • ASTM F1467-99R05 : Guide for Use of an X-Ray Tester (|mF10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits

  • ASTM F1468 : Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search andScreening

  • ASTM F1468-04A : Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening

  • ASTM F1469 : Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment forNondestructive Testing

  • ASTM F1469-99 : Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

  • ASTM F147 : Test Method for Flexibility of Non Metallic Gasket Materials

  • ASTM F1470 : Guide for Fastener Sampling for Specified Mechanical Properties and PerformanceInspection

  • ASTM F1470-02 : Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

  • ASTM F1471 : Test Method for Air Cleaning Performance of a High Efficiency Particulate Air Filter System

  • ASTM F1471-93R01 : Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air Filter System

  • ASTM F1472 : Specification for Wrought Titanium 6Aluminum 4Vanadium Alloy for Surgical ImplantApplications (UNS R56400)

  • ASTM F1472-02A : Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

  • ASTM F1473 : An American National Standard Test Method for Notch Tensile Test to Measure the

  • ASTM F1473-01E01 : Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

  • ASTM F1474 : Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe(Withdrawn 2003) No Replacement

  • ASTM F1474-98(2001) : Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe (Withdrawn 2003)

  • ASTM F1475-93 : Specification for Dispensing Tanks, 250 Liter Maximum (Withdrawn 1998)

  • ASTM F1476-01 : Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

  • ASTM F1478 : Test Method for Determination of Abrasion Resistance of Images Produced from Copiers andPrinters (Taber Method)

  • ASTM F1478-95R00 : Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)

  • ASTM F1479 : Terminology Relating to Microwave Food Packaging

  • ASTM F1479-98R03 : Terminology Relating to Microwave Food Packaging

  • ASTM F148 : Test Method for Binder Durability of Cork Composition Gasket Materials

  • ASTM F1480-93 : Guide for Preparing a Chart for Presenting Residential Resilient Floor Covering Information to the Consumer (Withdrawn 2000)

  • ASTM F1481 : Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response Sandand Gravel Beaches

  • ASTM F1481-94R01 : Guide for Ecological Considerations for the Use of Bioremediation in Oil Spill Response\MSand and Gravel Beaches

  • ASTM F1482 : Practice for Installation and Preparation of Panel Type Underlayments to Receive ResilientFlooring

  • ASTM F1482-04 : Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring

  • ASTM F1483 : Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

  • ASTM F1483-98 : Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

  • ASTM F1484 : Test Methods for Performance of Steam Cookers

  • ASTM F1484-05 : Test Methods for Performance of Steam Cookers

  • ASTM F1486 : Practice for Determination of Abrasion and Smudge Resistance of Images Produced fromOffice Products (GA CAT Method)

  • ASTM F1486-96R02 : Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method)

  • ASTM F1487 : Consumer Safety Performance Specification for Playground Equipment for Public Use

  • ASTM F1487-05 : Consumer Safety Performance Specification for Playground Equipment for Public Use

  • ASTM F1488-03 : Specification for Coextruded Composite Pipe

  • ASTM F1489 : Guide for Performance of Patient Assessment by the Emergency Medical Technician(Paramedic) (Withdrawn 2002) No Replacement

  • ASTM F1489-93 : Guide for Performance of Patient Assessment by the Emergency Medical Technician (Paramedic) (Withdrawn 2002)

  • ASTM F149 : Terminology Relating to Optical Character Recognition

  • ASTM F1490 : Terminology Relating to Search and Rescue

  • ASTM F1490-04A : Terminology Relating to Search and Rescue

  • ASTM F1491 : Specification for An Avalanche Beacon Frequency

  • ASTM F1491-93R02 : Specification for An Avalanche Beacon Frequency

  • ASTM F1492-00 : Specifications for Helmets Used in Skateboarding and Trick Roller Skating

  • ASTM F1493 : Guide for Financing and Financial Accountability of Medical Transportation Systems

  • ASTM F1493-93R03 : Guide for Financing and Financial Accountability of Medical Transportation Systems

  • ASTM F1494 : Terminology Relating to Protective Clothing

  • ASTM F1494-03 : Terminology Relating to Protective Clothing

  • ASTM F1495 : Specification for Combination Oven Electric or Gas Fired

  • ASTM F1495-99 : Specification for Combination Oven Electric or Gas Fired

  • ASTM F1496 : Test Method for Performance of Convection Ovens

  • ASTM F1496-99 : Test Method for Performance of Convection Ovens

  • ASTM F1497 : Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes

  • ASTM F1497-99A : Test Method for Determining Laser Resistance of the Shaft of Tracheal Tubes

  • ASTM F1498-00E01 : Specification for Taper Pipe Threads 60|SD for Thermoplastic Pipe and Fittings

  • ASTM F1499 : Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

  • ASTM F1499-01 : Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

  • ASTM F15 : Specification for Iron Nickel Cobalt Sealing Alloy

  • ASTM F150 : Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

  • ASTM F1500 : Test Method for Quantitating Non UV Absorbing Nonvolatile Extractables from MicrowaveSusceptors Utilizing Solvents as Food Simulants

  • ASTM F1500-98R03 : Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants

  • ASTM F1501-95 : Test Method for Tension Testing of Calcium Phosphate Coatings (Withdrawn 2000)

  • ASTM F1502 : Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, andMedium Duty Vehicles

  • ASTM F1502-05E01 : Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

  • ASTM F1503 : Practice for Machine/Process Capability Study Procedure

  • ASTM F1503-02 : Practice for Machine/Process Capability Study Procedure

  • ASTM F1504-02 : Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

  • ASTM F1505 : Specification for Insulated and Insulating Hand Tools

  • ASTM F1505-01 : Specification for Insulated and Insulating Hand Tools

  • ASTM F1506 : Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Useby Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

  • ASTM F1506-02AE01 : Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

  • ASTM F1507 : Specification for Surge Suppressors for Shipboard Use

  • ASTM F1507-99 : Specification for Surge Suppressors for Shipboard Use

  • ASTM F1508 : Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services

  • ASTM F1508-96R04 : Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

  • ASTM F1509 : Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges

  • ASTM F1509-94R04 : Test Methods for Determining Acceptability of Ribbon Welds in Fabric Cartridges

  • ASTM F151 : Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004) NoReplacement

  • ASTM F1510-01 : Specification for Rotary Positive Displacement Pumps, Commercial Ships Use

  • ASTM F1511-05 : Specification for Mechanical Seals for Shipboard Pump Applications

  • ASTM F1512 : Practice for Ultrasonic C Scan Bond Evaluation of Sputtering Target Backing PlateAssemblies

  • ASTM F1512-94R03 : Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies

  • ASTM F1513 : Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin FilmApplications

  • ASTM F1513-99R03 : Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications

  • ASTM F1514 : Test Method for Measuring Heat Stability of Resilient Vinyl Flooring by Color Change

  • ASTM F1514-03 : Test Method for Measuring Heat Stability of Resilient Flooring by Color Change

  • ASTM F1515 : Test Method for Measuring Light Stability of Resilient Vinyl Flooring by Color Change

  • ASTM F1515-03 : Test Method for Measuring Light Stability of Resilient Flooring by Color Change

  • ASTM F1516 : Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (whenRecommended)

  • ASTM F1516-03 : Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)

  • ASTM F1517 : Guide for Scope of Performance of Emergency Medical Services Ambulance Operations

  • ASTM F1517-94R02 : Guide for Scope of Performance of Emergency Medical Services Ambulance Operations

  • ASTM F1518 : Practice for Cleaning and Disinfection of Flexible Fiberoptic and Video Endoscopes Used inthe Examination of the Hollow Viscera

  • ASTM F1518-00 : Practice for Cleaning and Disinfection of Flexible Fiberoptic and Video Endoscopes Used in the Examination of the Hollow Viscera

  • ASTM F151-86(1997) : Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004)

  • ASTM F1519 : Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Usedto Heat Food Products

  • ASTM F1519-98R03 : Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products

  • ASTM F152 : Test Methods for Tension Testing of Nonmetallic Gasket Materials

  • ASTM F1520 : Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges

  • ASTM F1520-94R03 : Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges

  • ASTM F1521 : Test Methods for Performance of Range Tops

  • ASTM F1521-03 : Test Methods for Performance of Range Tops

  • ASTM F1522 : Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills

  • ASTM F1522-95R01 : Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills

  • ASTM F1523 : Guide for Selection of Booms in Accordance With Water Body Classifications

  • ASTM F1523-94R01 : Guide for Selection of Booms in Accordance With Water Body Classifications

  • ASTM F1524 : Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

  • ASTM F1524-95R01 : Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

  • ASTM F1525 : Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

  • ASTM F1525-96R01 : Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

  • ASTM F1526 : Test Method for Measuring Surface Metal Contamination on Silicon Wafers by TotalReflection X Ray Fluorescence Spectroscopy (Withdrawn 2003) No Replacement

  • ASTM F1526-95(2000) : Test Method for Measuring Surface Metal Contamination on Silicon Wafers by Total Reflection X-Ray Fluorescence Spectroscopy (Withdrawn 2003)

  • ASTM F1527 : Guide for Application of Certified Reference Materials and Reference Wafers for Calibrationand Control of Instruments for Measuring Resistivity of Silicon (Withdrawn 2003) No Replacement

  • ASTM F1527-02 : Guide for Application of Certified Reference Materials and Reference Wafers for Calibration and Control of Instruments for Measuring Resistivity of Silicon (Withdrawn 2003)

  • ASTM F1528 : Test Method for Measuring Boron Contamination in Heavily Doped -Type Silicon Substrates by Secondary Ion Mass Spectrometry

  • ASTM F1528-94(1999) : Test Method for Measuring Boron Contamination in Heavily Doped N-Type Silicon Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F1529 : Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure

  • ASTM F1529-97 : Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure (Withdrawn 2003)

  • ASTM F153 : Test Method for Determining the Yield of Wide Inked Computer Ribbons

  • ASTM F1530 : Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafersby Automated Noncontact Scanning (Withdrawn 2003) No Replacement

  • ASTM F1530-02 : Test Method for Measuring Flatness, Thickness, and Thickness Variation on Silicon Wafers by Automated Noncontact Scanning (Withdrawn 2003)

  • ASTM F1531 : Test Method for Comparing Printer or Copier Cartridges

  • ASTM F1531-94 : Test Method for Comparing Printer or Copier Cartridges (Withdrawn 2003)

  • ASTM F1532-94 : Guide for Qualification, Selection, Training, Utilization, and Supervision of Security Screening Personnel (Withdrawn 2001)

  • ASTM F1533 : Specification for Deformed Polyethylene (PE) Liner

  • ASTM F1533-01 : Specification for Deformed Polyethylene (PE) Liner

  • ASTM F1534 : Test Method for Determining Changes in Fire Test Response Characteristics of CushioningMaterials After Water Leaching

  • ASTM F1534-05 : Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

  • ASTM F1534M-94E01 : Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

  • ASTM F1535 : Test Method for Carrier Recombination Lifetime in Silicon Wafers by NoncontactMeasurement of Photoconductivity Decay by Microwave Reflectance (Withdrawn 2003) NoReplacement

  • ASTM F1535-00 : Test Method for Carrier Recombination Lifetime in Silicon Wafers by Noncontact Measurement of Photoconductivity Decay by Microwave Reflectance (Withdrawn 2003)

  • ASTM F1536 : Test Method for Determining Strength and Setting Time of Synthetic Water ActivatedPolyurethane Fiberglass Orthopaedic Casting Tape

  • ASTM F1536-95R05 : Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

  • ASTM F1537 : Specification for Wrought Cobalt 28 Chromium 6 Molybdenum Alloy for Surgical Implants(UNS R31537, UNS R31538, and UNS R31539)

  • ASTM F1537-00 : Specification for Wrought Cobalt-28 Chromium-6 Molybdenum Alloy for Surgical Implants

  • ASTM F1538 : Specification for Glass and Glass Ceramic Biomaterials for Implantation

  • ASTM F1538-03 : Specification for Glass and Glass Ceramic Biomaterials for Implantation

  • ASTM F1539-95(1999) : Test Method for Constant Amplitude Bending Fatigue Tests of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F154 : Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces(Withdrawn 2003) No Replacement

  • ASTM F154-02 : Guide for Identification of Structures and Contaminants Seen on Specular Silicon Surfaces (Withdrawn 2003)

  • ASTM F1540-95(1999) : Test Method for Pull-Out Fixation Strength of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F1541 : Specification and Test Methods for External Skeletal Fixation Devices

  • ASTM F1541-02 : Specification and Test Methods for External Skeletal Fixation Devices

  • ASTM F1542 : Specification for the Requirements and Disclosure of Self Closing Aneurysm Clips

  • ASTM F1542-94R00 : Specification for the Requirements and Disclosure of Self-Closing Aneurysm Clips

  • ASTM F1543 : Specification for Shock Attenuation Properties of Fencing Surfaces

  • ASTM F1543-96R02E01 : Specification for Shock Attenuation Properties of Fencing Surfaces

  • ASTM F1544-04 : Specification for Determining the Rating Velocities of an Archery Bow

  • ASTM F1545 : Specification for Plastic Lined Ferrous Metal Pipe, Fittings, and Flanges

  • ASTM F1545-97R03 : Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

  • ASTM F1546/F1546M : Specification for Fire Hose Nozzles

  • ASTM F1546/F1546M-96R01 : Specification for Fire Hose Nozzles

  • ASTM F1547-99 : Guide Listing Relevant Standards and Publications for Commercial Shipbuilding

  • ASTM F1548 : Specification for the Performance of Fittings for Use with Gasketed Mechanical CouplingsUsed in Piping Applications

  • ASTM F1548-01 : Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

  • ASTM F1549 : Terminology Relating to Underwater Search, Rescue, and Recovery Activities

  • ASTM F1549-94R05 : Terminology Relating to Underwater Search, Rescue, and Recovery Activities

  • ASTM F1550 : Test Method for Determination of Fire Test Response Characteristics of Components or Composites ofMattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing aBench Scale Oxygen Consumption Calorimeter

  • ASTM F1550-05 : Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale

  • ASTM F1550M-94E01 : Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale

  • ASTM F1551-03 : Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials

  • ASTM F1552 : Practice for Training Instructor Qualification and Certification Eligibility of EmergencyMedical Dispatchers

  • ASTM F1552-94R02 : Practice for Training Instructor Qualification and Certification Eligibility of Emergency Medical Dispatchers

  • ASTM F1553-01 : Guide for Specifying Industrial and Commercial Chain Link Fence

  • ASTM F1554 : Specification for Anchor Bolts, Steel, 36, 55, and 105 ksi Yield Strength

  • ASTM F1554-04 : Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

  • ASTM F1555 : Guide for Characteristics for Extremity Splints

  • ASTM F1555-94R02 : Guide for Characteristics for Extremity Splints

  • ASTM F1556 : Guide for Spinal Immobilization and Extrication (Spined) Device Characteristics

  • ASTM F155-65(1977) : Method of Test for for Temper of Strip and Sheet Metals for Electronic Devices (Spring-Back Method (Withdrawn 1983)

  • ASTM F1556-94R02 : Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics

  • ASTM F1557 : Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics

  • ASTM F1557-94R02 : Guide for Full Body Spinal Immobilization Devices (FBSID) Characteristics

  • ASTM F1558 : Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)

  • ASTM F1558-94R02 : Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID)

  • ASTM F1559 : Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)

  • ASTM F1559-94R02 : Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC)

  • ASTM F1560 : Practice for Emergency Medical Dispatch Management

  • ASTM F1560-00 : Practice for Emergency Medical Dispatch Management

  • ASTM F1561-03 : Performance Requirements for Plastic Chairs for Outdoor Use

  • ASTM F1562 : Guide for Use Oriented Foreign Language Instruction

  • ASTM F1562-95R05 : Guide for Use-Oriented Foreign Language Instruction

  • ASTM F1563 : Specification for Tools to Squeeze off Polyethylene (PE) Gas Pipe or Tubing

  • ASTM F1563-01 : Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

  • ASTM F1564 : Specification for Structure Mounted Insulating Work Platforms for Electrical Workers

  • ASTM F1564-95R00 : Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers

  • ASTM F1565 : Specification for Pressure Reducing Valves for Steam Service

  • ASTM F1565-00 : Specification for Pressure-Reducing Valves for Steam Service

  • ASTM F1566 : Test Methods for Evaluation of Innersprings and Boxsprings

  • ASTM F1566-99R04 : Test Methods for Evaluation of Innersprings and Boxsprings

  • ASTM F1567 : Specification for Fabricated or Cast Automatic Self Cleaning, Fuel Oil and Lubricating OilStrainers

  • ASTM F1567-94R01 : Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

  • ASTM F1568 : Specification for Food Processors, Electric

  • ASTM F1568-03 : Specification for Food Processors, Electric

  • ASTM F1569 : Guide for Generation of Consensus Reference Materials for Semiconductor Technology(Withdrawn 2003) No Replacement

  • ASTM F1569-94(1999) : Guide for Generation of Consensus Reference Materials for Semiconductor Technology (Withdrawn 2003)

  • ASTM F1570 : Test Method for Determining the Tactile Ratio of a Membrane Switch

  • ASTM F1570-01E01 : Test Method for Determining the Tactile Ratio of a Membrane Switch

  • ASTM F1571 : Test Method for Determination of Abrasion and Smudge Resistance of Images Producedfrom Business Copy Products (Sutherland Method)

  • ASTM F1571-95R02 : Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)

  • ASTM F1572 : Test Methods for Tire Performance Testing on Snow and Ice Surfaces

  • ASTM F1572-99 : Test Methods for Tire Performance Testing on Snow and Ice Surfaces

  • ASTM F1573 : Specification for Anesthetic Equipment Oropharyngeal and Nasopharyngeal Airways

  • ASTM F1573-95R00 : Specification for Anesthetic Equipment\MOropharyngeal and Nasopharyngeal Airways

  • ASTM F1574 : Test Method for Compressive Strength of Gaskets at Elevated Temperatures

  • ASTM F1574-03A : Test Method for Compressive Strength of Gaskets at Elevated Temperatures

  • ASTM F1575 : Test Method for Determining Bending Yield Moment of Nails

  • ASTM F1575-03 : Test Method for Determining Bending Yield Moment of Nails

  • ASTM F157-58 : Methods of Testing Wire for Supports Used in Electronic Devices and Lamps (Withdrawn 1959)

  • ASTM F1576-95A : Guide for Selection of Security Control Systems, Part II – Defining the Central Contol System (Withdrawn 1999)

  • ASTM F1577 : Test Methods for Detention Locks for Swinging Doors

  • ASTM F1577-05 : Test Methods for Detention Locks for Swinging Doors

  • ASTM F1578 : Practice for Contact Closure Cycling of a Membrane Switch

  • ASTM F1578-01 : Practice for Contact Closure Cycling of a Membrane Switch

  • ASTM F1579 : Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications

  • ASTM F1579-02E01 : Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications

  • ASTM F1580 : Specification for Titanium and Titanium 6 Aluminum 4 Vanadium Alloy Powders for Coatingsof Surgical Implants

  • ASTM F1580-01 : Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants

  • ASTM F1581 : Specification for Composition of Anorganic Bone for Surgical Implants

  • ASTM F1581-99 : Specification for Composition of Anorganic Bone for Surgical Implants

  • ASTM F1582 : Terminology Relating to Spinal Implants

  • ASTM F1582-98R03 : Terminology Relating to Spinal Implants

  • ASTM F1583 : Practice for Communications Procedures Phonetics

  • ASTM F1583-95R00 : Practice for Communications Procedures\MPhonetics

  • ASTM F1584 : Practice for Marking Buildings During Disaster Search Operations

  • ASTM F1584-95R03 : Practice for Marking Buildings During Disaster Search Operations

  • ASTM F1585 : Guide for Integrity Testing of Porous Barrier Medical Packages

  • ASTM F1585-00 : Guide for Integrity Testing of Porous Barrier Medical Packages

  • ASTM F1586 : Specification for Wrought Nitrogen Strengthened 21 Chromium/10 Nickel/3 Manganese/2.5Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)

  • ASTM F1586-02 : Specification for Wrought Nitrogen Strengthened 21 Chromium\M10 Nickel\M3 Manganese\M2.5 Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

  • ASTM F1587 : Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders

  • ASTM F1587-99R05 : Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders

  • ASTM F1588 : Test Method for Constant Tensile Load Joint Test (CTLJT)

  • ASTM F1588-96R02 : Test Method for Constant Tensile Load Joint Test (CTLJT)

  • ASTM F1589 : Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in PlasticPipe (Withdrawn 2003) No Replacement

  • ASTM F1589-95(2001) : Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe (Withdrawn 2003)

  • ASTM F1590 : Specification for Tracheostomy Tube Connectors (Withdrawn 2003) Replaced by ISO5366.3 0 ASTM 0

  • ASTM F1590-95 : Specification for Tracheostomy Tube Connectors (Withdrawn 2003)

  • ASTM F1591 : Practice for Visual Signals Between Persons on the Ground and in Aircraft During GroundEmergencies

  • ASTM F1591-95R00 : Practice for Visual Signals Between Persons on the Ground and in Aircraft During Ground Emergencies

  • ASTM F1592 : Test Methods for Detention Hollow Metal Vision Systems

  • ASTM F1592-05 : Test Methods for Detention Hollow Metal Vision Systems

  • ASTM F1593 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High MassResolution Glow Discharge Mass Spectrometer

  • ASTM F1593-97R02 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

  • ASTM F1594 : Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum CoatingApplications

  • ASTM F1594-95R03 : Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications

  • ASTM F1595 : Practice for Viewing Conditions for Visual Inspection of Membrane Switches

  • ASTM F1595-00 : Practice for Viewing Conditions for Visual Inspection of Membrane Switches

  • ASTM F1596 : Practice for Exposure of Membrane Switches to Temperature and Relative Humidity

  • ASTM F1596-00 : Practice for Exposure of Membrane Switches to Temperature and Relative Humidity

  • ASTM F1597 : Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch

  • ASTM F1597-02 : Test Method for Determining the Actuation Force and Contact Force of a Membrane Switch

  • ASTM F1598 : Test Method for Determining the Effects of Chemical/Solvent Exposure to a MembraneSwitch/Graphic Overlay (Spot Test Method)

  • ASTM F1598-95R02 : Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

  • ASTM F1599 : Guide for Collecting Performance Data on Temporary Storage Devices

  • ASTM F1599-95R03 : Guide for Collecting Performance Data on Temporary Storage Devices

  • ASTM F16 : Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for ElectronicDevices and Lamps

  • ASTM F1600 : Terminology Relating to Bioremediation

  • ASTM F1600-95AR01 : Terminology Relating to Bioremediation

  • ASTM F1601 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

  • ASTM F1601-01 : Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

  • ASTM F1602 : Specification for Kettles, Steam Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or WallMounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1602-95R01 : Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1603 : Specification for Kettles, Steam Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, TableMounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1603-95R01 : Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Connected, Gas Fired and Electric Fired

  • ASTM F1604 : Specification for Freezers, Ice Cream, Soft Serve, Shake

  • ASTM F1604-02 : Specification for Freezers, Ice Cream, Soft Serve, Shake

  • ASTM F1605 : Test Method for Performance of Double Sided Griddles

  • ASTM F1605-95R01E01 : Test Method for Performance of Double-Sided Griddles

  • ASTM F1606 : Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE)

  • ASTM F1606-95 : Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner (Withdrawn 2004)

  • ASTM F1607 : Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

  • ASTM F1607-95R03 : Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

  • ASTM F1608 : Test Method for Microbial Ranking of Porous Packaging Materials (Exposure ChamberMethod)

  • ASTM F1608-00R04 : Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)

  • ASTM F1609 : Specification for Calcium Phosphate Coatings for Implantable Materials

  • ASTM F1609-03 : Specification for Calcium Phosphate Coatings for Implantable Materials

  • ASTM F1610-95(1999) : Test Method for Soft Tissue Fixation Strength of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F1611 : Specification for Intramedullary Reamers

  • ASTM F1611-00R04 : Specification for Intramedullary Reamers

  • ASTM F1612 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty FemoralComponents with Torsion

  • ASTM F1612-95R00 : Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion

  • ASTM F1613 : Specification for Surgical Tissue/Dressing/Pick Up Forceps (Thumb Type)

  • ASTM F1613-95R02 : Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)

  • ASTM F1614 : Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear

  • ASTM F1614-99 : Test Method for Shock Attenuating Properties of Materials Systems for Athletic Footwear

  • ASTM F1615 : Specification for Cautionary Labeling for Five Gallon Open Head Plastic Containers

  • ASTM F1615-95R04 : Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers

  • ASTM F1616 : Guide for Scope of Performance of First Responders Who Practice in the Wilderness orDelayed or Prolonged Transport Settings

  • ASTM F1616-95R02 : Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings

  • ASTM F1617 : Test Method for Measuring Surface Sodium, Aluminum, Potassium, and Iron on Silicon andEPI Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003) No Replacement

  • ASTM F1617-98(2002) : Test Method for Measuring Surface Sodium, Aluminum, Potassium, and Iron on Silicon and EPI Substrates by Secondary Ion Mass Spectrometry (Withdrawn 2003)

  • ASTM F1618 : Practice for Determination of Uniformity of Thin Films on Silicon Wafers (Withdrawn 2003) No Replacement

  • ASTM F1618-02 : Practice for Determination of Uniformity of Thin Films on Silicon Wafers (Withdrawn 2003)

  • ASTM F1619 : Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by InfraredAbsorption Spectroscopy with p Polarized Radiation Incident at the Brewster Angle (Withdrawn 2003) No Replacement

  • ASTM F1619-95(2000)e1 : Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle (Withdrawn 2003)

  • ASTM F1620 : Practice for Calibrating a Scanning Surface Inspection System Using MonodispersePolystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces (Withdrawn 2003) NoReplacement

  • ASTM F1620-96 : Practice for Calibrating a Scanning Surface Inspection System Using Monodisperse Polystyrene Latex Spheres Deposited on Polished or Epitaxial Wafer Surfaces (Withdrawn 2003)

  • ASTM F1621 : Practice for Determining the Positional Accuracy Capabilities of a Scanning SurfaceInspection System (Withdrawn 2003) No Replacement

  • ASTM F1621-96 : Practice for Determining the Positional Accuracy Capabilities of a Scanning Surface Inspection System (Withdrawn 2003)

  • ASTM F1622-95(2000) : Test Method for Measuring the Torsional Properties of Metallic Bone Screws (Withdrawn 2001)

  • ASTM F1623 : Terminology Relating to Thermal Imaging Products

  • ASTM F1623-96R02 : Terminology Relating to Thermal Imaging Products

  • ASTM F1624 : Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by theIncremental Step Loading Technique

  • ASTM F1624-00 : Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

  • ASTM F1625 : Specification and Test Method for Rear Mounted Bicycle Child Carriers

  • ASTM F1625-00 : Specification and Test Method for Rear-Mounted Bicycle Child Carriers

  • ASTM F1626 : Practice for Preparing Shipboard Fire Control Plans

  • ASTM F1626-95R00 : Practice for Preparing Shipboard Fire Control Plans

  • ASTM F1627 : Specification for Tracheostomy Tubes Pediatric Tracheostomy Tubes (Withdrawn 2003) Replaced by ISO5366.3

  • ASTM F1627-95 : Specification for Tracheostomy Tubes-Pediatric Tracheostomy Tubes (Withdrawn 2003)

  • ASTM F1628 : Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and RelatedTreatments Intended for Use During Laser Surgery

  • ASTM F1628-95R00 : Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery

  • ASTM F1629 : Guide for Establishing Operating Emergency Medical Services and Management InformationSystems, or Both

  • ASTM F1629-95R02 : Guide for Establishing Operating Emergency Medical Services and Management Information Systems, or Both

  • ASTM F1630 : Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities

  • ASTM F1630-00 : Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003)

  • ASTM F1631 : Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for theSport of Fencing (Withdrawn 2003) No Replacement

  • ASTM F1631-95 : Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing (Withdrawn 2003)

  • ASTM F1632 : Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Greenand Sports Field Rootzone Mixes

  • ASTM F1632-03 : Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes

  • ASTM F1633 : Guide for Techniques in Land Search

  • ASTM F1633-97R03 : Guide for Techniques in Land Search

  • ASTM F1634 : Practice for In Vitro Environmental Conditioning of Polymer Matrix Composite Materials andImplant Devices

  • ASTM F1634-95R00 : Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices

  • ASTM F1635 : Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resinsand Fabricated Forms for Surgical Implants

  • ASTM F1635-04A : Test Method for Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

  • ASTM F1636-95e2 : Specification for Bores and Cones for Modular Femoral Heads (Withdrawn 2001)

  • ASTM F1637 : Practice for Safe Walking Surfaces

  • ASTM F1637-02E01 : Practice for Safe Walking Surfaces

  • ASTM F1638 : Terminology for Surgical Tissue/Dressing/Pick Up Forceps (Thumb Type)

  • ASTM F1638-95R02 : Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)

  • ASTM F1639 : Test Method for Performance of Combination Ovens

  • ASTM F1639-95R01 : Test Method for Performance of Combination Ovens

  • ASTM F1640-03 : Guide for Selection and Use of Packaging Materials for Foods to Be Irradiated

  • ASTM F1641 : Test Method for Measuring Penetration Resistance of Security Glazing Using a PendulumImpactor (Withdrawn 2004) No Replacement

  • ASTM F1641-95 : Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor (Withdrawn 2004)

  • ASTM F1642 : Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

  • ASTM F1642-04 : Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

  • ASTM F1643 : Test Methods for Detention Sliding Door Locking Device Assembly

  • ASTM F1643-05 : Test Methods for Detention Sliding Door Locking Device Assembly

  • ASTM F1644 : Guide for Health and Safety Training of Oil Spill Responders

  • ASTM F1644-01 : Guide for Health and Safety Training of Oil Spill Responders

  • ASTM F1645 : Test Method for Water Migration in Honeycomb Core Materials

  • ASTM F1645-00 : Test Method for Water Migration in Honeycomb Core Materials

  • ASTM F1646 : Terminology Relating to Safety and Traction for Footwear

  • ASTM F1646-05E01 : Terminology Relating to Safety and Traction for Footwear

  • ASTM F1647-02A : Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes

  • ASTM F1648 : Test Methods for Archery Bowstring Component Serving String Material

  • ASTM F1648-95R03 : Test Methods for Archery Bowstring Component\MServing String Material

  • ASTM F1649 : Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires onVehicles Equipped with Anti Lock Braking Systems

  • ASTM F1649-96R03 : Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems

  • ASTM F1650 : Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

  • ASTM F1650-98 : Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions

  • ASTM F1651 : Guide for Training the Emergency Medical Technician (Paramedic)

  • ASTM F1651-95R02 : Guide for Training the Emergency Medical Technician (Paramedic)

  • ASTM F1652 : Guide for Providing Essential Data Needed in Advance for Prehospital Emergency MedicalServices

  • ASTM F1652-95R02 : Guide for Providing Essential Data Needed in Advance for Prehospital Emergency Medical Services

  • ASTM F1653 : Guide for Scope of Performance of Triage in Prehospital Environment

  • ASTM F1653-95R02 : Guide for Scope of Performance of Triage in a Prehospital Environment

  • ASTM F1654 : Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triagein Prehospital Environment

  • ASTM F1654-95R02 : Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment

  • ASTM F1655 : Guide for Training First Responders Who Practice in Wilderness, Delayed, or ProlongedTransport Settings

  • ASTM F1655-95R02 : Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

  • ASTM F1656 : Guide for Health and Safety Training of Oil Spill Responders in the United States

  • ASTM F1656-01 : Guide for Health and Safety Training of Oil Spill Responders in the United States

  • ASTM F1657 : Practice for Emergency Joining of Booms with Incompatible Connectors

  • ASTM F1657-96R02 : Practice for Emergency Joining of Booms with Incompatible Connectors

  • ASTM F1658-95 : Test Method for Shear Testing of Calcium Phosphate Coatings (Withdrawn 2000)

  • ASTM F1659 : Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on SolidMetallic Substrates (Withdrawn 2005) No Replacement

  • ASTM F1659-95 : Test Method for Bending and Shear Fatigue Testing of Calcium Phosphate Coatings on Solid Metallic Substrates

  • ASTM F1660-95(1999) : Test Method for Elastic Static Bending of Metallic Bone Staples (Withdrawn 2000)

  • ASTM F1661 : Test Method for Determining the Contact Bounce Time of a Membrane Switch

  • ASTM F1661-96R02 : Test Method for Determining the Contact Bounce Time of a Membrane Switch

  • ASTM F1662-04 : Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch

  • ASTM F1663 : Test Method for Determining the Capacitance of a Membrane Switch

  • ASTM F1663-95R02 : Test Method for Determining the Capacitance of a Membrane Switch

  • ASTM F1664-01 : Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

  • ASTM F1665 : Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer CoatedSteel Barbed Wire Used With Chain Link Fence

  • ASTM F1665-01 : Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

  • ASTM F1666 : Specification for Adult Tracheostomy Tubes (Withdrawn 2003) Replaced by ISO5366.3 0 ASTM 0

  • ASTM F1666-95e1 : Specification for Adult Tracheostomy Tubes (Withdrawn 2003)

  • ASTM F1667 : Specification for Driven Fasteners : Nails, Spikes, and Staples

  • ASTM F1667-03 : Specification for Driven Fasteners : Nails, Spikes, and Staples

  • ASTM F1668-96R02 : Guide for Construction Procedures for Buried Plastic Pipe

  • ASTM F1669M : Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

  • ASTM F1669M-96R02 : Specification for Insulation Monitors for Shipboard Electrical Systems \[Metric\]

  • ASTM F1670 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration bySynthetic Blood

  • ASTM F1670-03 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

  • ASTM F1671 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by BloodBorne Pathogens Using Phi X174 Bacteriophage Penetration as a Test System

  • ASTM F1671-03 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System

  • ASTM F1671F1671M : Test Method for Resistance of Materials Used in Protective Clothing toPenetration by Blood-

  • ASTM F1672 : Specification for Resurfacing Patellar Prosthesis

  • ASTM F1672-95R00 : Specification for Resurfacing Patellar Prosthesis

  • ASTM F1673 : Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

  • ASTM F1673-04 : Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

  • ASTM F1674-96 : Test Method for Joint Restraint Products for Use with PVC Pipe

  • ASTM F1675-03 : Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

  • ASTM F1676 : Specification for Basic Tumbling Mats

  • ASTM F1676-96R03 : Specification for Basic Tumbling Mats

  • ASTM F1677 : Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) (Withdrawn 2006) No Replacement

  • ASTM F1677-05 : Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)

  • ASTM F1678 : Test Method for Using a Portable Articulated Strut Slip Tester (PAST) (Withdrawn 2005) NoReplacement

  • ASTM F1678-96 : Test Method for Using a Portable Articulated Strut Slip Tester (PAST) (Withdrawn 2005)

  • ASTM F1679 : Test Method for Using a Variable Incidence Tribometer (VIT) (Withdrawn 2006) NoReplacement

  • ASTM F1679-04E01 : Test Method for Using a Variable Incidence Tribometer (VIT)

  • ASTM F1680 : Test Method for Determining Circuit Resistance of a Membrane Switch

  • ASTM F1680-02 : Test Method for Determining Circuit Resistance of a Membrane Switch

  • ASTM F1681 : Test Method for Determining Current Carrying Capacity of a Conductor as Part of aMembrane Switch Circuit

  • ASTM F1681-96R02 : Test Method for Determining Current Carrying Capacity of a Conductor as Part of a Membrane Switch Circuit

  • ASTM F1682 : Test Method for Determining Travel of a Membrane Switch

  • ASTM F1682-02 : Test Method for Determining Travel of a Membrane Switch

  • ASTM F1683 : Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assemblyor Membrane Switch Component

  • ASTM F1683-02 : Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component

  • ASTM F1684 : Specification for Iron Nickel and Iron Nickel Cobalt Alloys for Low Thermal ExpansionApplications

  • ASTM F1684-99R05E01 : Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

  • ASTM F1685 : Specification for Pressure Reducing Manifolds for Air or Nitrogen Systems

  • ASTM F1685-00 : Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

  • ASTM F1686 : Guide for Surveys to Document and Assess Oiling Conditions on Shorelines

  • ASTM F1686-97R03 : Guide for Surveys to Document and Assess Oiling Conditions on Shorelines

  • ASTM F1687 : Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines

  • ASTM F1687-97R03 : Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines

  • ASTM F1688-96 : Guide for Estimating Oil Spill Recovery System Effectiveness (Withdrawn 1999)

  • ASTM F1689 : Test Method for Determining the Insulation Resistance of a Membrane Switch

  • ASTM F1689-02 : Test Method for Determining the Insulation Resistance of a Membrane Switch

  • ASTM F1690 : Specification for Humidifiers for Medical Use/Part 1 : General Requirements for ActiveHumidification Systems

  • ASTM F1690-96R04 : Specification for Humidifiers for Medical Use\MPart 1 : General Requirements for Active Humidification Systems

  • ASTM F1691-96 : Test Method for Determining Axial Pull-Out Strength of Medical Bone Screws (Withdrawn 2001)

  • ASTM F1692 : Test Method for Life Evaluation of a Turbine Powered Nozzle for Household Central Vacuum Cleaning Systems

  • ASTM F1692-01 : Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems

  • ASTM F1693 : Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

  • ASTM F1693-96R03 : Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

  • ASTM F1694 : Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips and Falls

  • ASTM F1694-96R04 : Guide for Composing Walkway Surface Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls

  • ASTM F1695 : Test Method for Performance of Underfired Broilers

  • ASTM F1695-03E01 : Test Method for Performance of Underfired Broilers

  • ASTM F1696 : An American National Standard Test Method for Energy Performance of Single-Rack, Door-

  • ASTM F1696-96R03 : Test Method for Energy Performance of Single-Rack Hot Water Sanitizing, Door-Type Commercial Dishwashing Machines

  • ASTM F1697 : Specification for Poly(Vinyl Chloride) (PVC) Pro?le Strip for Machine Spiral-Wound Liner PipeRehabilitation of Existing Sewers andConduit1,2

  • ASTM F1697-02 : Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

  • ASTM F1698 : Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and CementitiousGrout for Rehabilitation of Existing Man Entry Sewers and Conduits

  • ASTM F1698-02 : Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

  • ASTM F1699 : Classification for Passive Fiber Optic Seals

  • ASTM F1699-96R01 : Classification for Passive Fiber Optic Seals

  • ASTM F17 : Terminology Relating to Flexible Barrier Materials

  • ASTM F1700 : Specification for Solid Vinyl Floor Tile

  • ASTM F1700-04 : Specification for Solid Vinyl Floor Tile

  • ASTM F1701 : Specification for Unused Polypropylene Rope with Special Electrical Properties

  • ASTM F1701-96R01 : Specification for Unused Polypropylene Rope with Special Electrical Properties

  • ASTM F1702-96R02E01 : Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus

  • ASTM F1703 : Guide for Ice Hockey Playing Facilities

  • ASTM F1703-04 : Guide for Ice Hockey Playing Facilities

  • ASTM F1704-05 : Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems

  • ASTM F1705 : Guide for Training Emergency Medical Services Ambulance Operations

  • ASTM F1705-96R02 : Guide for Training Emergency Medical Services Ambulance Operations

  • ASTM F1706 : Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers

  • ASTM F1706-96R02 : Practice for Determining Energy Consumption of Nonimpact Personal Computer Printers

  • ASTM F1707 : Practice for Determining Energy Consumption of Facsimile Machines

  • ASTM F1707-96R02 : Practice for Determining Energy Consumption of Facsimile Machines

  • ASTM F1708 : Practice for Evaluation of Granular Polysilicon by Meter Zoner Spectroscopies (Withdrawn2003) No Replacement

  • ASTM F1708-02 : Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies (Withdrawn 2003)

  • ASTM F1709 : Specification for High Purity Titanium Sputtering Targets for Electronic Thin FilmApplications

  • ASTM F1709-97R02 : Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications

  • ASTM F1710 : Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High MassResolution Glow Discharge Mass Spectrometer

  • ASTM F1710-97R02 : Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

  • ASTM F1711 : Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel DisplayManufacturing Using a Four Point Probe

  • ASTM F1711-96R02 : Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method

  • ASTM F1712 : Specification for Steel Chain Link Fencing Materials Used in Detention and CorrectionalFacilities

  • ASTM F1712-02 : Specification for Steel Chain-Link Fencing Materials Used in Detention and Correctional Facilities

  • ASTM F1713 : Specification for Wrought Titanium 13Niobium 13Zirconium Alloy for Surgical ImplantApplications

  • ASTM F1713-03 : Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)

  • ASTM F1714 : Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices

  • ASTM F1714-96R02 : Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices

  • ASTM F1715 : Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices (Withdrawn2006) No Replacement

  • ASTM F1715-00E01 : Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices

  • ASTM F1716 : Guide for Transition and Performance of Marine Software Systems Maintenance

  • ASTM F1716-96R02 : Guide for Transition and Performance of Marine Software Systems Maintenance

  • ASTM F1717 : Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

  • ASTM F1717-04 : Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

  • ASTM F1718 : Specification for Rotary Positive Displacement Distillate Fuel Pumps

  • ASTM F1718-01 : Specification for Rotary Positive Displacement Distillate Fuel Pumps

  • ASTM F1719 : Specification for Image Interactive Stereotactic and Localization Systems

  • ASTM F1719-96R02 : Specification for Image-Interactive Stereotactic and Localization Systems

  • ASTM F1720 : Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin

  • ASTM F1720-96R04 : Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin

  • ASTM F1721 : Practices for Determining Stability of Direct Thermal Imaging Products

  • ASTM F1721-04 : Practices for Determining Stability of Direct Thermal Imaging Products

  • ASTM F1722 : Test Method for Determining Mass and Moment of Inertia of Alpine Skis

  • ASTM F1722-96R03 : Test Method for Determining Mass and Moment of Inertia of Alpine Skis

  • ASTM F1723 : Practice for Evaluation of Polycrystalline Silicon Rods by Float Zone Crystal Growth andSpectroscopy (Withdrawn 2003) No Replacement

  • ASTM F1723-02 : Practice for Evaluation of Polycrystalline Silicon Rods by Float-Zone Crystal Growth and Spectroscopy (Withdrawn 2003)

  • ASTM F1724 : Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by AcidExtraction Atomic Absorption Spectroscopy (Withdrawn 2003) No Replacement

  • ASTM F1724-01 : Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy (Withdrawn 2003)

  • ASTM F1725 : Guide for Analysis of Crystallographic Perfection of Silicon Ingots (Withdrawn 2003) NoReplacement

  • ASTM F1725-02 : Guide for Analysis of Crystallographic Perfection of Silicon Ingots (Withdrawn 2003)

  • ASTM F1726 : Guide for Analyis of Crystallographic Perfection of Silicon Wafers (Withdrawn 2003) NoReplacement

  • ASTM F1726-02 : Guide for Analyis of Crystallographic Perfection of Silicon Wafers (Withdrawn 2003)

  • ASTM F1727 : Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers (Withdrawn2003) No Replacement

  • ASTM F1727-02 : Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers (Withdrawn 2003)

  • ASTM F1728 : Practice for Multiple Persons Cold Water Survival/Rescue Technique : Huddle Position

  • ASTM F1728-96R01 : Practice for Multiple Persons Cold Water Survival/Rescue Technique : Huddle Position

  • ASTM F1729 : Practice for Single Person Cold Water Survival/Rescue Technique : HELP Position

  • ASTM F1729-96R01 : Practice for Single Person Cold Water Survival/Rescue Technique : HELP Position

  • ASTM F1730 : Guide for Throwing a Water Rescue Throwbag

  • ASTM F1730-96R02 : Guide for Throwing a Water Rescue Throwbag

  • ASTM F1731 : Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and OtherThermal Hazard Protective Clothing

  • ASTM F1731-96R02 : Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing

  • ASTM F1732-96 : Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

  • ASTM F1733 : Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) PlasticPipe and Tubing

  • ASTM F1733-96R02 : Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

  • ASTM F1734 : Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze OffProcedures to Avoid Long Term Damage in Polyethylene (PE) Gas Pipe

  • ASTM F1734-03 : Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

  • ASTM F1735-02E01 : Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

  • ASTM F1736-03 : Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms

  • ASTM F1737 : Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response : Boom andNozzle Systems

  • ASTM F1737-96R99 : Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response : Boom and Nozzle Systems

  • ASTM F1738 : Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

  • ASTM F1738-96R99 : Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

  • ASTM F1739-96R02 : Guide for Performance of a Water Rescuer\MLevel I

  • ASTM F1740 : Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope

  • ASTM F1740-96R02 : Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope

  • ASTM F1741-02A : Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

  • ASTM F1742 : Specification for PVC Insulating Sheeting

  • ASTM F1742-03E01 : Specification for PVC Insulating Sheeting

  • ASTM F1743-96R03 : Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

  • ASTM F1744 : Guide for Care and Handling of Stainless Steel Surgical Instruments

  • ASTM F1744-96R02E01 : Guide for Care and Handling of Stainless Steel Surgical Instruments

  • ASTM F1745-96 : Test Method for External Fixator Connectors (Withdrawn 2000)

  • ASTM F1746-96 : Test Method for Determining In-Plane Compressive Properties of Circular Ring or Ring Segment Bridge Elements (Withdrawn 2000)

  • ASTM F1747-96 : Test Method for External Fixator Joints (Withdrawn 2000)

  • ASTM F1748-96 : Test Method for External Fixator Subassemblies (Withdrawn 2000)

  • ASTM F1749-02 : Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels

  • ASTM F1750-96 : Specification for Paintball Gun Threaded-Propellant Source Interface

  • ASTM F1751 : Specification for Helmets Used in Recreational Roller Skating (Withdrawn 2003) NoReplacement

  • ASTM F1751-00 : Specification for Helmets Used in Recreational Roller Skating (Withdrawn 2003)

  • ASTM F1752 : Test Method for Archery Bow Component Cord Material

  • ASTM F1752-96R01 : Test Method for Archery Bow Component\MCord Material

  • ASTM F1753 : Specification for Classification and Marking of Single Lens Scopes for Use with Archery Bows

  • ASTM F1753-96R01 : Specification for Classification and Marking of Single-Lens Scopes for Use with Archery Bows

  • ASTM F1754 : Guide for Marine Vessel Structural Inspection Considerations

  • ASTM F1754-97R04 : Guide for Marine Vessel Structural Inspection Considerations

  • ASTM F175-58 : Specification for Round Nickel Wire for Lamps and Electronic Devices (Withdrawn 1963)

  • ASTM F1755M : Specification for Solid State Bargraph Meters for Shipboard Use (Metric)

  • ASTM F1755M-96R02 : Specification for Solid State Bargraph Meters for Shipboard Use \[Metric\]

  • ASTM F1756 : Guide for Implementation of a Fleet Management System Network

  • ASTM F1756-97AR02 : Guide for Implementation of a Fleet Management System Network

  • ASTM F1757 : Guide for Digital Communication Protocols for Computerized Systems

  • ASTM F1757-96R02 : Guide for Digital Communication Protocols for Computerized Systems

  • ASTM F1758 : Test Methods for Detention Hinges Used on Detention Grade Swinging Doors

  • ASTM F1758-05 : Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

  • ASTM F1759 : Practice for Design of High Density Polyethylene (HDPE) Manholes for SubsurfaceApplications

  • ASTM F1759-97R04 : Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

  • ASTM F1760 : Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non Pressure Plastic Pipe HavingReprocessed Recycled Content

  • ASTM F1760-01 : Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

  • ASTM F1761 : Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets

  • ASTM F1761-00 : Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets

  • ASTM F1762 : Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure

  • ASTM F1762-02 : Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure

  • ASTM F1763 : Test Methods for Measuring Contrast of a Linear Polarizer (Withdrawn 2003) NoReplacement

  • ASTM F1763-96(2002) : Test Methods for Measuring Contrast of a Linear Polarizer (Withdrawn 2003)

  • ASTM F1764 : Guide for Selection of Hardline Communication Systems for Confined Space Rescue

  • ASTM F1764-97R02 : Guide for Selection of Hardline Communication Systems for Confined-Space Rescue

  • ASTM F1765 : Guide for Ice Staff Self Rescue Technique

  • ASTM F1765-97AR02 : Guide for Ice Staff Self-Rescue Technique

  • ASTM F1766 : Guide for Ice Awis Self Rescue Technique

  • ASTM F1766-97AR02 : Guide for Ice Awls Self-Rescue Technique

  • ASTM F1767 : Guide for Forms Used for Search and Rescue

  • ASTM F1767-98R05 : Guide for Forms Used for Search and Rescue

  • ASTM F1768 : Guide for Using Whistle Signals During Rope Rescue Operations

  • ASTM F1768-97R02 : Guide for Using Whistle Signals During Rope Rescue Operations

  • ASTM F1769 : Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic VaporBarriers Using a Flame Ionization Detector (Withdrawn 2004) No Replacement

  • ASTM F1769-97 : Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)

  • ASTM F1770 : Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible BarrierMaterials to Water Vapor (Withdrawn 2004) No Replacement

  • ASTM F1770-97e1 : Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)

  • ASTM F1771 : Test Method for Evaluating Gate Oxide Integrity by Voltage Ramp Technique (Withdrawn2003) No Replacement

  • ASTM F1771-97(2002) : Test Method for Evaluating Gate Oxide Integrity by Voltage Ramp Technique (Withdrawn 2003)

  • ASTM F1772 : Specification for Climbing Harnesses

  • ASTM F1772-99 : Specification for Climbing Harnesses

  • ASTM F1773 : Terminology Relating to Climbing and Mountaineering Equipment and Practices

  • ASTM F1773-97R04 : Terminology Relating to Climbing and Mountaineering Equipment and Practices

  • ASTM F1774 : Specification for Climbing and Mountaineering Carabiners

  • ASTM F1774-99 : Specification for Climbing and Mountaineering Carabiners

  • ASTM F1775 : Specification for Labeling of Climbing and Mountaineering Equipment

  • ASTM F1775-97R04 : Specification for Labeling of Climbing and Mountaineering Equipment

  • ASTM F1776-01 : Specification for Eye Protective Devices for Paintball Sports

  • ASTM F1777-02 : Practice for Paintball Field Operation

  • ASTM F1778 : Guide for Selection of Skimmers for Oil Spill Response

  • ASTM F1778-97R02 : Guide for Selection of Skimmers for Oil-Spill Response

  • ASTM F1779 : Practice for Reporting Visual Observations of Oil on Water

  • ASTM F1779-97R03 : Practice for Reporting Visual Observations of Oil on Water

  • ASTM F1780 : Guide for Estimating Oil Spill Recovery System Effectiveness

  • ASTM F1780-97R02 : Guide for Estimating Oil Spill Recovery System Effectiveness

  • ASTM F1781 : Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

  • ASTM F1781-03 : Specification for Elastomeric Flexible Hinge Finger Total Joint Implants

  • ASTM F1782 : Practice for Amount of Ink Deposit on Fabric Type Ribbons

  • ASTM F1782-97R02 : Practice for Amount of Ink Deposit on Fabric Type Ribbons

  • ASTM F1783 : Guide for Performance of an Ice Rescuer/Level II

  • ASTM F1783-97R02 : Guide for Performance of an Ice Rescuer\MLevel II

  • ASTM F1784 : Test Method for Performance of a Pasta Cooker

  • ASTM F1784-97R03E01 : Test Method for Performance of a Pasta Cooker

  • ASTM F1785 : Test Method for Performance of Steam Kettles

  • ASTM F1785-97R03E01 : Test Method for Performance of Steam Kettles

  • ASTM F1786 : Test Method for Performance of Braising Pans

  • ASTM F1786-97R04E01 : Test Method for Performance of Braising Pans

  • ASTM F1787 : Test Method for Performance of Rotisserie Ovens

  • ASTM F1787-98R03 : Test Method for Performance of Rotisserie Ovens

  • ASTM F1788 : Guide for In Situ Burning of Oil Spills on Water : Environmental and OperationalConsiderations

  • ASTM F1788-97R03 : Guide for In-Situ Burning of Oil Spills on Water : Environmental and Operational Considerations

  • ASTM F1789-04A : Terminology for F16 Mechanical Fasteners

  • ASTM F1790 : Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing

  • ASTM F1790-05 : Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing

  • ASTM F1791 : Specification for Filters Used in Air or Nitrogen Systems

  • ASTM F1791-00 : Specification for Filters Used in Air or Nitrogen Systems

  • ASTM F1792 : Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

  • ASTM F1792-97R04 : Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

  • ASTM F1793 : Specification for Automatic Shut Off Valves (Also Known as Excess Flow Valves, EFV) for AirOr Nitrogen Service

  • ASTM F1793-97R04 : Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service

  • ASTM F1794 : Specification for Hand Operated, Globe Style Valves for Gas (Except Oxygen Gas), andHydraulic Systems

  • ASTM F1794-97R04 : Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems

  • ASTM F1795 : Specification for Pressure Reducing Valves for Air or Nitrogen Systems

  • ASTM F1795-00 : Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

  • ASTM F1796 : Specification for High Voltage Detectors/Part 1 Capacitive Type to be Used for VoltagesExceeding 600 Volts AC

  • ASTM F1796-97R02 : Specification for High Voltage Detectors\MPart 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC

  • ASTM F1797-98R03 : Test Method for Acoustic Emission Testing of Insulated Digger Derricks

  • ASTM F1798 : Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms andSubassemblies Used in Spinal Arthrodesis Implants

  • ASTM F1798-97R03 : Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants

  • ASTM F1799 : Guide for Shipboard Generated Waste Management Audits

  • ASTM F1799-97R04 : Guide for Shipboard Generated Waste Management Audits

  • ASTM F18 : Specification and Test Method for Evaluation of Glass to Metal Headers Used in ElectronDevices

  • ASTM F180 : Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices

  • ASTM F1800-04 : Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements

  • ASTM F1801 : Practice for Corrosion Fatigue Testing of Metallic Implant Materials

  • ASTM F1801-97R04 : Practice for Corrosion Fatigue Testing of Metallic Implant Materials

  • ASTM F1802 : Test Method for Performance Testing of Excess Flow Valves

  • ASTM F1802-04 : Test Method for Performance Testing of Excess Flow Valves

  • ASTM F1803 : Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based onControlled Inside Diameter

  • ASTM F1803-04 : Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

  • ASTM F1804 : Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During PullIn Installation

  • ASTM F1804-03 : Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

  • ASTM F1805 : Test Method for Single Wheel Driving Traction in a Straight Line on Snow and Ice CoveredSurfaces

  • ASTM F1805-00 : Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces

  • ASTM F1806 : Practice for Tire Testing Operations/Basic Concepts and Terminology for Reference Tire Use

  • ASTM F1806-97R01E01 : Practice for Tire Testing Operations\NBasic Concepts and Terminology for Reference Tire Use

  • ASTM F1807 : Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross linkedPolyethylene (PEX) Tubing

  • ASTM F1807-04 : Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing

  • ASTM F1808 : Guide for Weight Control Technical Requirements for Surface Ships

  • ASTM F1808-03 : Guide for Weight Control Technical Requirements for Surface Ships

  • ASTM F1809 : Guide for Selection and Use of Etching Solutions to Delineate Structural Defects in Silicon(Withdrawn 2003) No Replacement

  • ASTM F1809-02 : Guide for Selection and Use of Etching Solutions to Delineate Structural Defects in Silicon (Withdrawn 2003)

  • ASTM F1810 : Test Method for Counting Preferentially Etched or Decorated Surface Defects in SiliconWafers (Withdrawn 2003) No Replacement

  • ASTM F1810-97(2002) : Test Method for Counting Preferentially Etched or Decorated Surface Defects in Silicon Wafers (Withdrawn 2003)

  • ASTM F1811 : Practice for Estimating the Power Spectral Density Function and Related Finish Parametersfrom Surface Profile Data (Withdrawn 2003) No Replacement

  • ASTM F1811-97(2002) : Practice for Estimating the Power Spectral Density Function and Related Finish Parameters from Surface Profile Data (Withdrawn 2003)

  • ASTM F1812 : Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

  • ASTM F1812-02 : Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding

  • ASTM F1813 : Specification for Wrought Titanium 12 Molybdenum 6 Zirconium 2 Iron Alloy for SurgicalImplant (UNS R58120)

  • ASTM F1813-01 : Specification for Wrought Titanium \N 12 Molybdenum \N 6 Zirconium \N 2 Iron Alloy for Surgical Implant (UNS R58120)

  • ASTM F1814 : Guide for Evaluating Modular Hip and Knee Joint Components

  • ASTM F1814-97AR03 : Guide for Evaluating Modular Hip and Knee Joint Components

  • ASTM F1815-97 : Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, Particle Density, and Bulk Density of Putting Green and Sports Turf Root Zones

  • ASTM F1816 : Safety Specification for Drawstrings on Children’s Upper Outerwear

  • ASTM F1816-97R04 : Safety Specification for Drawstrings on Children’s Upper Outerwear

  • ASTM F1817-97R03 : Test Method for Performance of Conveyor Ovens

  • ASTM F1818 : Specification for Foot Protection for Chain Saw Users

  • ASTM F1818-04 : Specification for Foot Protection for Chain Saw Users

  • ASTM F1819 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration bySynthetic Blood Using a Mechanical Pressure Technique

  • ASTM F1819-04 : Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

  • ASTM F1820 : Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device

  • ASTM F1820-97R03 : Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device

  • ASTM F1821 : Consumer Safety Specification for Toddler Beds

  • ASTM F1821-03A : Consumer Safety Specification for Toddler Beds

  • ASTM F1822 : Consumer Safety Specification for Non Full Size Baby Cribs (Withdrawn 2006) Replaced by F406 0 ASTM 0

  • ASTM F1822-97 : Consumer Safety Specification for Non-Full-Size Baby Cribs

  • ASTM F1823 : Guide for Water Rescue Personal Flotation Device (PFD)

  • ASTM F1823-97R02 : Guide for Water Rescue Personal Flotation Device (PFD)

  • ASTM F1824 : Guide for Performance of a Water Rescuer Level II

  • ASTM F1824-97R02 : Guide for Performance of a Water Rescuer\NLevel II

  • ASTM F1825 : Specification for Clampstick Type Live Line Tools

  • ASTM F1825-03 : Specification for Clampstick Type Live Line Tools

  • ASTM F1826 : Specification for Live Line and Measuring Telescoping Tools

  • ASTM F1826-00 : Specification for Live Line and Measuring Telescoping Tools

  • ASTM F1827-97R00 : Terminology Relating to Food Service Equipment

  • ASTM F1828 : Specification for Ureteral Stents

  • ASTM F1828-97 : Specification for Ureteral Stents

  • ASTM F1829 : Test Method for Static Evaluation of the Glenoid Locking Mechanism in Shear

  • ASTM F1829-98R03 : Test Method for Static Evaluation of Glenoid Locking Mechanism in Shear

  • ASTM F1830 : Practice for Selection of Blood for In Vitro Evaluation of Blood Pumps

  • ASTM F1830-97R05 : Practice for Selection of Blood for Evaluation of Blood Pumps

  • ASTM F1831 : Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices

  • ASTM F1831-97 : Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices

  • ASTM F1832-97R02 : Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows

  • ASTM F1833 : Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes

  • ASTM F1833-97 : Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes

  • ASTM F1834 : Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant MitigationMethod on Land

  • ASTM F1834-98R04 : Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land

  • ASTM F1835 : Guide for Cable Splicing Installations

  • ASTM F1835-97R02 : Guide for Cable Splicing Installations

  • ASTM F1836M-97R02 : Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

  • ASTM F1837M : Specification for Heat Shrink Cable Entry Seals (Metric)

  • ASTM F1837M-97R02 : Specification for Heat-Shrink Cable Entry Seals (Metric)

  • ASTM F1838 : Performance Requirements for Child’s Plastic Chairs for Outdoor Use

  • ASTM F1838-98R04E01 : Performance Requirements for Child’s Plastic Chairs for Outdoor Use

  • ASTM F1839 : Specification for Rigid Polyurethane Foam for Use as a Standard Material for TestingOrthopaedic Devices and Instruments

  • ASTM F1839-01 : Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments

  • ASTM F1840 : Terminology for Surgical Suture Needles

  • ASTM F1840-98AR04 : Terminology for Surgical Suture Needles

  • ASTM F1841 : Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

  • ASTM F1841-97R05 : Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps

  • ASTM F1842 : Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for MembraneSwitch Applications

  • ASTM F1842-02 : Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications

  • ASTM F1843 : Practice for Sample Preparation of Transparent Plastic Films for Specular GlossMeasurements, on Membrane Switch Overlays

  • ASTM F1843-97R02 : Practice for Sample Preparation of Transparent Plastic Films for Specular Gloss Measurements, on Membrane Switch Overlays

  • ASTM F1844 : Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel DisplayManufacturing Using a Noncontact Eddy Current Gage

  • ASTM F1844-97R02 : Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage

  • ASTM F1845 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum Copper, AluminumSilicon, and Aluminum Copper Silicon Alloys by High Mass Reduction Glow Discharge MassSpectrometer

  • ASTM F1845-97R02 : Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer

  • ASTM F1846 : Practice for Symbols and Markings for Use With Land Search Maps

  • ASTM F1846-98R03 : Practice for Symbols and Markings for Use With Land Search Maps

  • ASTM F1847 : Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers

  • ASTM F1847-98R05 : Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers

  • ASTM F1848 : Classification for Search and Rescue Dog Crew/Teams

  • ASTM F1848-98 : Classification for Search and Rescue Dog Crew/Teams

  • ASTM F1849 : Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

  • ASTM F1849-00 : Specification for Helmets Used in Short Track Speed Ice Skating (Not to Include Hockey)

  • ASTM F1850 : Specification for Particular Requirements for Anesthesia Workstations and Their Components

  • ASTM F1850-00R05 : Specification for Particular Requirements for Anesthesia Workstations and Their Components

  • ASTM F1851 : Practice for Bar Code Verification

  • ASTM F1851-98R03 : Practice for Bar Code Verification

  • ASTM F1852 : Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies,

  • ASTM F1852-04A : Specification for |P`Twist Off|P’ Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

  • ASTM F1853-03 : Test Method for Measuring Sleeping Bag Packing Volume

  • ASTM F1854 : Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

  • ASTM F1854-01 : Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

  • ASTM F1855 : Specification for Polyoxymethylene (Acetal) for Medical Applications

  • ASTM F1855-00R05 : Specification for Polyoxymethylene (Acetal) for Medical Applications

  • ASTM F1856 : Practice for Determining Toner Usage for Printer Cartridges

  • ASTM F1856-04 : Practice for Determining Toner Usage for Printer Cartridges

  • ASTM F1857 : Terminology Relating to Ink Jet Printers and Images Made Therefrom

  • ASTM F1857-01 : Terminology Relating to Ink Jet Printers and Images Made Therefrom

  • ASTM F1858 : Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs orReclining Mechanisms for Outdoor Use

  • ASTM F1858-98R04E01 : Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use

  • ASTM F1859 : Specification for Rubber Sheet Floor Covering Without Backing

  • ASTM F1859-04 : Specification for Rubber Sheet Floor Covering Without Backing

  • ASTM F1860 : Specification for Rubber Sheet Floor Covering With Backing

  • ASTM F1860-04 : Specification for Rubber Sheet Floor Covering With Backing

  • ASTM F1861 : Specification for Resilient Wall Base

  • ASTM F1861-02 : Specification for Resilient Wall Base

  • ASTM F1862 : Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood(Horizontal Projection of Fixed Volume at a Known Velocity)

  • ASTM F1862-00A : Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity)

  • ASTM F1863 : Test Method for Measuring the Night Vision Goggle Weighted Transmisivity of TransparentParts

  • ASTM F1863-98R04 : Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts

  • ASTM F1864 : Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials andCoatings

  • ASTM F1864-05 : Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

  • ASTM F1865-02A : Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing

  • ASTM F1866-98 : Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

  • ASTM F1867 : Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A forExisting Sewer and Conduit Rehabilitation

  • ASTM F1867-98R04 : Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

  • ASTM F1868 : Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a SweatingHot Plate

  • ASTM F1868-02 : Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate

  • ASTM F1869 : Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor UsingAnhydrous Calcium Chloride

  • ASTM F1869-04 : Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

  • ASTM F1870 : Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings inDetention and Correctional Facilities

  • ASTM F1870-05 : Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

  • ASTM F1871 : Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer andConduit Rehabilitation

  • ASTM F1871-02 : Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

  • ASTM F1872 : Guide for Use of Chemical Shoreline Cleaning Agents : Environmental and OperationalConsiderations

  • ASTM F1872-98 : Guide for Use of Chemical Shoreline Cleaning Agents : Environmental and Operational Considerations

  • ASTM F1873 : Specification for High Purity Dense Yttria Tetragonal Zirconium Oxide Polycrystal (Y TZP) forSurgical Implant Applications

  • ASTM F1873-98 : Specification for High-Purity Dense Yttria Tetragonal Zirconium Oxide Polycrystal (Y-TZP) for Surgical Implant Applications

  • ASTM F1874 : Test Method for Bend Testing of Needles Used in Surgical Sutures

  • ASTM F1874-98R04 : Test Method for Bend Testing of Needles Used in Surgical Sutures

  • ASTM F1875 : Practice for Fretting Corrosion Testing of Modular Implant Interfaces : Hip Femoral Headbore and Cone Taper Interface

  • ASTM F1875-98R04 : Practice for Fretting Corrosion Testing of Modular Implant Interfaces : Hip Femoral Head-Bore and Cone Taper Interface

  • ASTM F1876 : Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical ImplantApplications

  • ASTM F1876-98R03E01 : Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications

  • ASTM F1877 : Practice for Characterization of Particles

  • ASTM F1877-98R03E01 : Practice for Characterization of Particles

  • ASTM F1878 : Guide for Escort Vessel Evaluation and Selection

  • ASTM F1878-98R04 : Guide for Escort Vessel Evaluation and Selection

  • ASTM F1879 : Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs

  • ASTM F1879-98R05 : Guide for Demonstrating Obedience and Agility in Search and Rescue Dogs

  • ASTM F1880-98R04 : Test Method for the Determination of Percent of Let-Off for Archery Bows

  • ASTM F1881-04 : Test Method for Measuring Baseball Bat Performance Factor

  • ASTM F1882 : Specification for Residential Basketball Systems

  • ASTM F1882-04 : Specification for Residential Basketball Systems

  • ASTM F1883 : Practice for Selection of Wire and Cable Size in AWG or Metric Units

  • ASTM F1883-03 : Practice for Selection of Wire and Cable Size in AWG or Metric Units

  • ASTM F1884 : Test Method for Determining Residual Solvents in Packaging Materials

  • ASTM F1884-04 : Test Methods for Determining Residual Solvents in Packaging Materials

  • ASTM F1885 : Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogensand Other Microorganisms

  • ASTM F1885-04 : Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms

  • ASTM F1886 : Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection

  • ASTM F1886-98R04 : Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection

  • ASTM F1887-02 : Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs

  • ASTM F1888-02 : Test Method for Compression-Displacement of Baseballs and Softballs

  • ASTM F1889 : Guide for Straightness Measurement of Arrow Shafts

  • ASTM F1889-98R04 : Guide for Straightness Measurement of Arrow Shafts

  • ASTM F1890-04 : Test Method for Measuring Softball Bat Performance Factor

  • ASTM F1891 : Specification for Arc and Flame Resistant Rainwear

  • ASTM F1891-02B : Specification for Arc and Flame Resistant Rainwear

  • ASTM F1892 : Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices

  • ASTM F1892-04 : Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices

  • ASTM F1893 : Guide for Measurement of Ionizing Dose Rate Burnout of Semiconductor Devices

  • ASTM F1893-98R03 : Guide for Measurement of Ionizing Dose-Rate Burnout of Semiconductor Devices

  • ASTM F1894 : Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition andThickness

  • ASTM F1894-98R03 : Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness

  • ASTM F1895 : Practice for Submersion of a Membrane Switch

  • ASTM F1895-98R04 : Practice for Submersion of a Membrane Switch

  • ASTM F1896 : Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

  • ASTM F1896-98R04 : Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

  • ASTM F1897 : Specification for Leg Protection for Chain Saw Users

  • ASTM F1897-04 : Specification for Leg Protection for Chain Saw Users

  • ASTM F1898-01 : Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers

  • ASTM F1899 : Specification for Food Waste Pulper Without Waterpress Assembly

  • ASTM F1899-98R03 : Specification for Food Waste Pulper Without Waterpress Assembly

  • ASTM F19 : Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

  • ASTM F1900 : Test Method for Water Resistance of Footwear Using a Walking Step Simulator

  • ASTM F1900-98R04 : Test Method for Water Resistance of Footwear Using a Walking Step Simulator

  • ASTM F1901-98R04 : Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

  • ASTM F1903 : Practice for Testing for Biological Responses to Particles In Vitro

  • ASTM F1903-98R03 : Practice for Testing For Biological Responses to Particles

  • ASTM F1904 : Practice for Testing the Biological Responses to Particles In Vivo

  • ASTM F1904-98R03 : Practice for Testing the Biological Responses to Particles

  • ASTM F1905 : Practice for Selecting Tests for Determining the Propensity of Materials to CauseImmunotoxicity

  • ASTM F1905-98R03 : Practice For Selecting Tests for Determining the Propensity of Materials to Cause Immunotoxicity

  • ASTM F1906 : Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests,

  • ASTM F1906-98R03 : Practice for Evaluation of Immune Responses In Biocompatibility Testing Using ELISA Tests, Lymphocyte Proliferation, and Cell Migration

  • ASTM F1908 : Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

  • ASTM F1908-98 : Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

  • ASTM F1909 : Specification for Preformed Open Cell Sponge Rubber Pail and Drum Gaskets

  • ASTM F1909-98R04 : Specification for Preformed Open\NCell Sponge Rubber Pail and Drum Gaskets

  • ASTM F1910 : Specification for Long Barbed Tape Obstacles

  • ASTM F1910-98R03 : Specification for Long Barbed Tape Obstacles

  • ASTM F1911 : Practice for Installation of Barbed Tape

  • ASTM F1911-98 : Practice for Installation of Barbed Tape

  • ASTM F1912 : Specification for Safety of Bean Bag Chairs

  • ASTM F1912-98R04 : Specification for Safety of Bean Bag Chairs

  • ASTM F1913 : Specification for Vinyl Sheet Floor Covering Without Backing

  • ASTM F1913-04 : Specification for Vinyl Sheet Floor Covering Without Backing

  • ASTM F1914 : Test Method for Short Term Indentation and Residual Indentation of Resilient Floor Covering

  • ASTM F1914-05 : Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering

  • ASTM F1915 : Test Methods for Glazing for Detention Facilities

  • ASTM F1915-05 : Test Methods for Glazing for Detention Facilities

  • ASTM F1916 : Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabricand Round Posts for Detention Applications

  • ASTM F1916-98 : Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications

  • ASTM F1917-00 : Consumer Safety Performance Specification for Infant Bedding and Related Accessories

  • ASTM F1918 : Safety Performance Specification for Soft Contained Play Equipment

  • ASTM F1918-04 : Safety Performance Specification for Soft Contained Play Equipment

  • ASTM F1919 : An American National Standard Standard Specification for Griddles, Single and Double Sided, Self-

  • ASTM F1919-03 : Specification for Griddles, Single and Double Sided, Self-heating, Counter or Stand Mounted Gas and Electric Fired

  • ASTM F1920-98R03 : Test Method for Energy Performance of Rack Conveyor, Hot Water Sanitizing, Commercial Dishwashing Machines

  • ASTM F1921 : Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and BlendsComprising the Sealing Surfaces of Flexible Webs

  • ASTM F1921-98R04 : Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

  • ASTM F1922 : Test Method for Tires, Pneumatic, Vehicular, Highway

  • ASTM F1922-98 : Test Method for Tires, Pneumatic, Vehicular, Highway

  • ASTM F1923 : Test Method for Tires, Pneumatic, Low Speed, Off Highway

  • ASTM F1923-98 : Test Method for Tires, Pneumatic, Low Speed, Off Highway

  • ASTM F1924-01E01 : Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

  • ASTM F1925-99R05 : Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants

  • ASTM F1926 : Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings

  • ASTM F1926-03 : Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings

  • ASTM F1927 : Test Method for Determination of Oxygen Gas Transmission Rate, Permeability andPermeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

  • ASTM F1927-98R04 : Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

  • ASTM F1928 : Safety Guide for Consumer Recreational Use of Fun Karts

  • ASTM F1928-98R04E01 : Safety Guide for Consumer Recreational Use of Fun-Karts

  • ASTM F1929 : Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

  • ASTM F1929-98R04 : Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

  • ASTM F1930 : Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash FireSimulations Using an Instrumented Manikin

  • ASTM F1930-00 : Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin

  • ASTM F1931 : Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces

  • ASTM F1931-98R04 : Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces

  • ASTM F1932 : Test Method for Measuring Sleeping Bag Loft

  • ASTM F1932-98R04 : Test Method for Measuring Sleeping Bag Loft

  • ASTM F1933 : Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent

  • ASTM F1933-98R04 : Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent

  • ASTM F1934 : Test Method for Weighing a Backpacking or Mountaineering Tent

  • ASTM F1934-98R04 : Test Method for Weighing a Backpacking or Mountaineering Tent

  • ASTM F1935 : Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent

  • ASTM F1935-01 : Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent

  • ASTM F1936 : Specification for Shock Absorbing Properties of North American Football Field PlayingSystems as Measured in the Field

  • ASTM F1936-98 : Specification for Shock-Absorbing Properties of North American Football Field Playing Systems as Measured in the Field

  • ASTM F1937 : Specification for Body Protectors Used in Horse Sports and Horseback Riding

  • ASTM F1937-04 : Specification for Body Protectors Used in Horse Sports and Horseback Riding

  • ASTM F1938 : Guide for Safer Use of Movable Soccer Goals

  • ASTM F1938-98R04 : Guide for Safer Use of Movable Soccer Goals

  • ASTM F1939-99A : Test Method for Radiant Protective Performance of Flame Resistant Clothing Materials

  • ASTM F1940-01 : Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

  • ASTM F1941 : Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch ScrewThreads (UN/UNR))

  • ASTM F1941-00 : Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

  • ASTM F1941M-00 : Specification for Electrodeposited Coatings on Threaded Fasteners \[Metric\]

  • ASTM F1942 : Practice for Creating Test Targets for Determining the Ink Yield of the Imaging SuppliesUsed in Ink Jet Printers

  • ASTM F1942-98R03 : Practice for Creating Test Targets for Determining the Ink Yield of the Imaging Supplies Used in Ink Jet Printers

  • ASTM F1943 : Test Method for Determining the Dynamic Thermal Response of Thermal Mass TransferRibbon Products/Atlantek Method

  • ASTM F1943-98R03 : Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products\MAtlantek Method

  • ASTM F1944 : Practice for Determining the Quality of the Text, Line and Solid Fill Output Produced by InkJet Printers

  • ASTM F1944-98R03 : Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers

  • ASTM F1945 : Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor FluorescentLighting

  • ASTM F1945-05 : Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting

  • ASTM F1946 : Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor FluorescentLighting and Window Filtered Daylight

  • ASTM F1946-04 : Practice for Accelerated Testing of the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting and Window\NFiltered Daylight

  • ASTM F1947 : Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers andConduits

  • ASTM F1947-04 : Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

  • ASTM F1948-99AE01 : Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

  • ASTM F1949 : Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles

  • ASTM F1949-99 : Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles

  • ASTM F1950 : Specification for Physical Information to be Transferred With Used Amusement Rides andDevices

  • ASTM F1950-99 : Specification for Physical Information to be Transferred With Used Amusement Rides and Devices

  • ASTM F1951-99 : Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment

  • ASTM F1952 : Specification for Helmets Used for Downhill Mountain Bicycle Racing

  • ASTM F1952-00 : Specification for Helmets Used for Downhill Mountain Bicycle Racing

  • ASTM F1953 : Guide for Construction and Maintenance of Grass Tennis Courts

  • ASTM F1953-99R03 : Guide for Construction and Maintenance of Grass Tennis Courts

  • ASTM F1955 : Test Method for Flammability of Sleeping Bags

  • ASTM F1955-99R05 : Test Method for Flammability of Sleeping Bags

  • ASTM F1956 : Specification for Rescue Carabiners

  • ASTM F1956-99R05 : Specification for Rescue Carabiners

  • ASTM F1957 : Test Method for Composite Foam Hardness Durometer Hardness

  • ASTM F1957-99R04 : Test Method for Composite Foam Hardness-Durometer Hardness

  • ASTM F1958/F1958M : Test Method for Determining the Ignitability of Non flame Resistance Materials for Clothingby Electric Arc Exposure Method Using Mannequins

  • ASTM F1958/F1958M-99 : Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins

  • ASTM F1959/F1959M : Test Method for Determining the Arc Thermal Performance Value of Materials for Clothing

  • ASTM F1959/F1959M-04 : Test Method for Determining the Arc Rating of Materials for Clothing

  • ASTM F1960 : Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Crosslinked Polyethylene (PEX) Tubing

  • ASTM F1960-04 : Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

  • ASTM F1961 : An American National Standard Standard Specification for Metal Mechanical Cold Flare CompressionFittings with DiscSpring for Crosslinked Polyethylene (PEX) Tubing12

  • ASTM F1961-02A : Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

  • ASTM F1962 : Guide for Use of Maxi Horizontal Directional Drilling for Placement of Polyethylene Pipe orConduit Under Obstacles, Including River Crossings

  • ASTM F1962-99 : Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

  • ASTM F1963 : Specification for Deep Fat Fryers, Gas or Electric, Open

  • ASTM F1963-99A : Specification for Deep-Fat Fryers, Gas or Electric, Open

  • ASTM F1964-99 : Test Method for Performance of Pressure and Kettle Fryers

  • ASTM F1965 : Test Method for Performance of Deck Ovens

  • ASTM F1965-99 : Test Method for Performance of Deck Ovens

  • ASTM F1966 : Specification for Dough Divider and Rounding Machines

  • ASTM F1966-03 : Specification for Dough Divider and Rounding Machines

  • ASTM F1967 : Consumer Safety Specification for Infant Bath Seats

  • ASTM F1967-04 : Consumer Safety Specification for Infant Bath Seats

  • ASTM F1970 : Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (VinylChloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

  • ASTM F1970-01 : Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

  • ASTM F1971 : Test Method for Electrical Resistance of Tires Under Load On the Test Bench

  • ASTM F1971-99 : Test Method for Electrical Resistance of Tires Under Load On the Test Bench

  • ASTM F1972 : Guide for Terminology Relating to Candles and Associated Accessory Items

  • ASTM F1972-99 : Guide for Terminology Relating to Candles and Associated Accessory Items

  • ASTM F1973 : Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene(PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems

  • ASTM F1973-02 : Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems

  • ASTM F1974-04 : Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

  • ASTM F1975-02 : Specification for Nonpowered Bicycle Trailers Designed for Human Passengers

  • ASTM F1976 : Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test

  • ASTM F1976-99 : Test Method for Cushioning Properties of Athletic Shoes Using an Impact Test

  • ASTM F1977 : Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum CleanerSystem

  • ASTM F1977-04 : Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System

  • ASTM F1978 : Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Usingthe TaberTM Abraser

  • ASTM F1978-00E01 : Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber|Pt Abraser

  • ASTM F1979 : Specification for Paintballs Used in the Sport of Paintball

  • ASTM F1979-04 : Specification for Paintballs Used in the Sport of Paintball

  • ASTM F1980-02 : Guide for Accelerated Aging of Sterile Medical Device Packages

  • ASTM F1981 : Specification for Suction Catheters for Use in the Respiratory Tract

  • ASTM F1981-99 : Specification for Suction Catheters for Use in the Respiratory Tract

  • ASTM F1982 : Test Methods for Analyzing Organic Contaminants on Silicon Wafer Surfaces by ThermalDesorption Gas Chromatography (Withdrawn 2003) No Replacement

  • ASTM F1982-99e1 : Test Methods for Analyzing Organic Contaminants on Silicon Wafer Surfaces by Thermal Desorption Gas Chromatography (Withdrawn 2003)

  • ASTM F1983 : Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for ImplantApplications

  • ASTM F1983-99R03 : Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications

  • ASTM F1984 : Practice for Testing for Whole Complement Activation in Serum by Solid Materials

  • ASTM F1984-99R03 : Practice for Testing for Whole Complement Activation in Serum by Solid Materials

  • ASTM F1985 : Specification for Pneumatic Operated, Globe Style, Control Valves

  • ASTM F1985-99R05 : Specification for Pneumatic-Operated, Globe-Style, Control Valves

  • ASTM F1986 : Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints forHot and Cold Drinking Water Systems

  • ASTM F1986-01 : Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

  • ASTM F1987 : Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints forHydronic Heating Systems

  • ASTM F1987-01 : Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems

  • ASTM F1988 : Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, WithAdjustable Backs, for Outdoor Use

  • ASTM F1988-99R04E01 : Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use

  • ASTM F1989 : Specification for Cooking Fire Suppression Blankets

  • ASTM F1989-05 : Specification for Cooking Fire Suppression Blankets

  • ASTM F1990 : Guide for In Situ Burning of Spilled Oil : Ignition Devices

  • ASTM F1990-99 : Guide for In-Situ Burning of Spilled Oil : Ignition Devices

  • ASTM F1991 : Test Method for Performance of Chinese (Wok) Ranges

  • ASTM F1991-99 : Test Method for Performance of Chinese (Wok) Ranges

  • ASTM F1992 : Practice for Reprocessing of Reusable, Heat Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes

  • ASTM F1992-99 : Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes

  • ASTM F1993 : Classification of Human Search and Rescue Resources

  • ASTM F1993-99R05 : Classification System of Human Search and Rescue Resources

  • ASTM F1994 : Test Method for Shipboard Fixed Foam Firefighting Systems

  • ASTM F1994-99R05 : Test Method for Shipboard Fixed Foam Firefighting Systems

  • ASTM F1995 : Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) byApplying Shear Force on a Membrane Switch

  • ASTM F1995-00 : Test Method for Determining the Bond Strength of a Surface Mount Device (SMD) on a Membrane Switch by Applying Shear Force

  • ASTM F1996 : Test Method for Silver Migration for Membrane Switch Circuitry

  • ASTM F1996-01 : Test Method for Silver Migration for Membrane Switch Circuitry

  • ASTM F1997 : Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch

  • ASTM F1997-99R05 : Test Method for Determining the Sensitivity (Teasing) of a Tactile Membrane Switch

  • ASTM F1999 : Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

  • ASTM F1999-00 : Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

  • ASTM F2000 : Guide for Fences for Ballfields and Other Sports Facilities

    • Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    November 2024
    M T W T F S S
    « Aug    
     123
    45678910
    11121314151617
    18192021222324
    252627282930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.