STD-ASTM F XXXX

아래 ASTM (American Society for Testing and Materials) 규격 목록은 규격번호와 제목을 발췌, 나열한 것입니다.
[출처 : www.astm.org ]

ASTM A , ASTM B ,  ASTM C ,  ASTM D , ASTM E , ASTM F | 1 || 2 | , ASTM G

• ASTM F 1 : STANDARD SPECIFICATION FOR NICKEL-CLAD AND NICKEL-PLATED STEEL STRIP FOR ELECTRON TUBES
• ASTM F 10 : MINIATURE ELECTRON TUBE LEADS
• ASTM F 100 : SHRINKAGE STRESSES IN PLASTIC EMBEDMENT MATERIALS
• ASTM F 1000 : STANDARD PRACTICE FOR PIPING SYSTEM DRAWING SYMBOLS
• ASTM F 1001 : STANDARD GUIDE FOR SELECTION OF CHEMICALS TO EVALUATE PROTECTIVE CLOTHING MATERIALS
• ASTM F 1002 : STANDARD PERFORMANCE SPECIFICATION FOR PROTECTIVE CLOTHING FOR USE BY WORKERS EXPOSED TO SPECIFIC MOLTEN SUBSTANCES AND RELATED THERMAL HAZARDS
• ASTM F 1003 : STANDARD SPECIFICATION FOR SEARCHLIGHTS ON MOTOR LIFEBOATS
• ASTM F 1004 : STANDARD CONSUMER SAFETY SPECIFICATION FOR EXPANSION GATES AND EXPANDABLE ENCLOSURES
• ASTM F 1005 : STANDARD PRACTICE FOR HVAC DUCT SHAPES; INDENTIFICATION AND DESCRIPTION OF DESIGN CONFIGURATION
• ASTM F 1006 : STANDARD SPECIFICATION FOR ENTRAINMENT SEPARATORS FOR USE IN MARINE PIPING APPLICATIONS
• ASTM F 1007 : STANDARD SPECIFICATION FOR PIPELINE EXPANSION JOINTS OF THE PACKED SLIP TYPE FOR MARINE APPLICATION
• ASTM F 1008 : GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – SALT MARSHES
• ASTM F 1009 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – OFFSHORE
• ASTM F 1010 : GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – BIRD HABITATS
• ASTM F 1011 : STANDARD GUIDE FOR DEVELOPING A HAZARDOUS MATERIALS TRAINING CURRICULUM FOR INITIAL RESPONSE PERSONNEL
• ASTM F 1012 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF CHEMICAL DISPERSANTS IN OIL SPILL RESPONSE – THE ARCTIC
• ASTM F 1013 : PRACTICE FOR DETERMINING THE PERFORMANCE OF A LIQUID SEPARATOR SYSTEM EMPLOYING A SINGLE-PASS, CONSTANT-RATE, NON-SOLIDS TEST
• ASTM F 1051 : STANDARD TEST METHOD FOR COMPARING MULTISTRIKE FILM RIBBONS
• ASTM F 1052 : STANDARD TEST METHOD FOR PRESSURE TESTING VAPOR PROTECTIVE ENSEMBLES
• ASTM F 1053 : STEEL HULL CONSTRUCTION TOLERANCES
• ASTM F 1053/F 1053M : GUIDE FOR STEEL HULL CONSTRUCTION TOLERANCE (METRIC)
• ASTM F 1054 : STANDARD SPECIFICATION FOR CONICAL FITTINGS
• ASTM F 1055 : STANDARD SPECIFICATION FOR ELECTROFUSION TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER CONTROLLED POLYETHYLENE PIPE AND TUBING
• ASTM F 1056 : STANDARD SPECIFICATION FOR SOCKET FUSION TOOLS FOR USE IN SOCKET FUSION TOOLS JOINING POLYETHYLENE PIPE OR TUBING AND FITTINGS
• ASTM F 1057 : ESTIMATING THE QUALITY OF EXTRUDED POLY (VINYL CHLORIDE) (PVC) PIPE BY THE HEAT REVERSION TECHNIQUE
• ASTM F 1058 : STANDARD SPECIFICATION FOR WROUGHT 40COBALT-20CHROMIUM-16IRON- 15NICKEL-7MOLYBDENUM ALLOY WIRE AND STRIP FOR SURGICAL IMPLANT APPLICATIONS (UNS R30003 AND UNS R 30008)
• ASTM F 1059 : PRACTICE FOR CALCULATING THE CONTRAST AND THRESHOLD SENSITIVITY OFA POSITIVE PHOTORESIST
• ASTM F 106 : STANDARD SPECIFICATION FOR BRAZING FILLER METALS FOR ELECTRON DEVICES
• ASTM F 1060 : STANDARD TEST METHOD FOR THERMAL PROTECTIVE PERFORMANCE OF MATERIALS FOR PROTECTIVE CLOTHING FOR HOT SURFACE CONTACT
• ASTM F 1061 : STANDARD SPECIFICATION FOR SKI BINDING TEST DEVICES
• ASTM F 1062 : STANDARD TEST METHOD FOR VERIFICATION OF SKI BINDING TEST DEVICES
• ASTM F 1063 : STANDARD PRACTICE FOR FUNCTIONAL INSPECTIONS AND ADJUSTMENTS OF ALPINE SKI/BINDING/BOOT SYSTEMS
• ASTM F 1064 : STANDARD PRACTICE FOR SAMPLING AND INSPECTION OF COMPLETE AND INCOMPLETE ALPINE SKI/BINDING/BOOT SYSTEMS IN RENTAL APPLICATIONS
• ASTM F 1065 : INSPECTION OF INCOMPLETE ALPINE SKI/BOOT/BINDING SYSTEMS IN RENTAL APPLICATION
• ASTM F 1066 : STANDARD SPECIFICATION FOR VINYL COMPOSITION FLOOR TILE
• ASTM F 1067 : TEST METHOD FOR DETERMINING THE PERFORMANCE OF A PETROLEUM PRODUCTFILTER CARTRIDGE USING A SINGLE-PASS CONSTANT RATE PROCEDURE
• ASTM F 1068 : STANDARD SPECIFICATION FOR DOORS, DOUBLE, GASTIGHT/AIRTIGHT, INDIVIDUALLY DOGGED, FOR MARINE USE
• ASTM F 1069 : STANDARD SPECIFICATION FOR DOORS, WATERFIGHT, GASTIGHT/AIRTIGHT AND WEATHERTIGHT, INDIVIDUALLY DOGGED, FOR MARINE USE
• ASTM F 1070 : STANDARD SPECIFICATION FOR DOORS, NON-TIGHT, FOR MARINE USE
• ASTM F 1071 : STANDARD SPECIFICATION FOR EXPANDED-METAL BULKHEAD PANELS
• ASTM F 1072 : STANDARD SPECIFICATION FOR EXPANDED-METAL DOORS
• ASTM F 1073 : STANDARD SPECIFICATION FOR DOOR FITTINGS, FOR WATERTIGHT/GASTIGHT/AIRTIGHT, WEATHERTIGHT, AND NON-TIGHT DOORS, FOR MARINE USE
• ASTM F 1074 : STANDARD SPECIFICATION FOR CLEATS, WELDED HORN TYPE
• ASTM F 1075 : STANDARD SPECIFICATION FOR DEHUMIDIFIER, SHIPBOARD, MECHANICALLY REFRIGERATED, SELF-CONTAINED
• ASTM F 1076 : STANDARD PRACTICE FOR EXPANDED WELDED AND SILVER BRAZED SOCKET JOINTS FOR PIPE AND TUBE
• ASTM F 1077 : STANDARD GUIDE FOR SELECTION OF COMMITTEE F16 FASTENER SPECIFICATIONS
• ASTM F 1078 : STANDARD TEMINOLOGY FOR SURGICAL SCISSORS – INSERTED AND NON-INSERTED BLADES
• ASTM F 1079 : STANDARD SPECIFICATION FOR INSERTER AND NONINSERTED SURGICAL SCISSORS
• ASTM F 108 : RESISTIVITY OF SILICON EPITAXIAL LAYERS BY THE THREE-PROBE VOLTAGE BREAKDOWN METHOD
• ASTM F 1080 : STANDARD TEST METHOD FOR DETERMINING THE CONSISTENCY OF VISCOUS LIQUIDS USING A CONSISTOMETER
• ASTM F 1081 : STANDARD SPECIFICATION FOR COMPETITION WRESTLING MATS
• ASTM F 1082 : STANDARD PRACTICE FOR TIRES – DETERMINING PRECISION FOR TEST METHOD STANDARDS
• ASTM F 1083 : STANDARD SPECIFICATION FOR PIPE, STEEL, HOT-DIPPED ZINC-COATED (GALVANIZED) WELDED, FOR FENCE STRUCTURES
• ASTM F 1084 : STANDARD GUIDE FOR SAMPLING OIL/WATER MIXTURES FOR OIL SPILL RECOVERY EQUIPMENT
• ASTM F 1085 : STANDARD SPECIFICATION FOR MATTRESS AND BOX SPRINGS FOR USE IN BERTHS IN MARINE VESSELS
• ASTM F 1086 : STANDARD GUIDE FOR STRUCTURES AND RESPONSIBILITIES OF EMERGENCY MEDICAL SERVICE SYSTEMS ORGANIZATIONS
• ASTM F 1087 : STANDARD TEST METHODS FOR LINEAR DIMENSIONAL STABILITY OF A GASKETMATERIAL TO MOISTURE
• ASTM F 1088 : STANDARD SPECIFICATION FOR BETA-TRICALCIUM PHOSPHATE FOR SURGICAL IMPLANTATION
• ASTM F 1089 : STANDARD TEST METHOD FOR CORROSION OF SURGICAL INSTRUMENTS
• ASTM F 109 : STANDARD TERMINOLOGY RELATING TO SURFACE IMPERFECTIONS ON CERAMICS
• ASTM F 1090 : STANDARD CLASSIFICATION FOR BANK AND MERCANTILE VAULT CONSTRUCTION
• ASTM F 1091 : STANDARD SPECIFICATION FOR WROUGHT COBALT-20CHROMIUM-15TUNGSTEN- 10NICKEL ALLOY SURGICAL FIXATION WIRE (UNS R30605)
• ASTM F 1092 : STANDARD SPECIFICATION FOR FIBERGLASS (GRP) PULTRUDED OPEN-WEATHER STORM AND GUARD, SQUARE RAILING SYSTEMS
• ASTM F 1093 : STANDARD TEST METHODS FOR TENSILE STRENGTH CHARACTERISTICS OF OIL SPILL RESPONSE BOOM
• ASTM F 1094 : STANDARD TEST METHODS FOR MICROBIOLOGICAL MONITORING OF WATER USED FOR PROCESSING ELECTRON AND MICROELECTRONIC DEVICES BY DIRECT PRESSURE TAP SAMPLING VALVE AND BY THE PRESTERILIZED PLASTIC BAG METHOD
• ASTM F 1095 : RAPID ENUMERATION OF BACTERIA IN ELECTRONICS-GRADE PURIFIED WATER SYSTEMS BY DIRECT-COUNT EPIFLUORESCENCE MICROSCOPY
• ASTM F 1096 : MEASURING MOSFET SATURATED THRESHOLD VOLTAGE
• ASTM F 1097 : STANDARD SPECIFICATION FOR MORTAR, REFRACTORY (HIGH-TEMPERATURE, AIR-SETTING)
• ASTM F 1098 : STANDARD SPECIFICATION FOR ENVELOPE DIMENSIONS FOR BUTTERFLY VALVES – NPS 2 TO 24
• ASTM F 1099 : RAT GUARDS, SHIP’S
• ASTM F 1099M : STANDARD SPECIFICATION FOR RAT GUARDS, SHIP’S (METRIC)
• ASTM F 110 : STANDARD TEST METHOD FOR THICKNESS OF EPITAXIAL OR DIFFUSED LAYERSIN SILICON BY THE ANGLE LAPPING AND STAINING TECHNIQUE
• ASTM F 1100 : VENTILATORS INTENDED FOR USE IN CRITICAL CARE
• ASTM F 1101 : STANDARD SPECIFICATION FOR VENTILATORS INTENDED FOR USE DURING ANESTHESIA
• ASTM F 1102 : PREPARATION OF USE AND CARE BOOKLETS FOR RESIDENTIAL RESILIENT NONTEXTERED FLOOR COVERINGS
• ASTM F 1103 : MATERIALS RESPONSE TO FLAME-45 DEGREE (FOR AEROSPACE VEHICLES)
• ASTM F 1104 : STANDARD TEST METHOD FOR PREPARING AIRCRAFT CLEANING COMPOUNDS, LIQUID TYPE, WATER BASE, FOR STORAGE STABILITY TESTING
• ASTM F 1105 : STANDARD TEST METHOD FOR PREPARING AIRCRAFT CLEANING COMPOUNDS, LIQUIDE-TYPE, TEMPERATURE-SENSITIVE, OR SOLVENT-BASED, FOR STORAGESTABILITY TESTING
• ASTM F 1106 : STANDARD SPECIFICATION FOR WARPING HEADS, ROPE HANDLING (GYPSY HEAD, CAPSTAN HEAD)
• ASTM F 1107 : STANDARD TERMINOLOGY RELATING TO SNOWBOARDING
• ASTM F 1108 : STANDARD SPECIFICATION FOR TITANIUM-6ALUMINUM-4VANADIUM ALLOY CASTINGS FOR SURGICAL IMPLANTS (UNS R56406)
• ASTM F 1109 : POROUS COMPOSITES OF POLYTETRAFLUOROETHYLENE AND CARBON FOR SURGICAL IMPLANT APPLICATIONS
• ASTM F 111 : STANDARD PRACTICE FOR DETERMINING BARIUM YIELD, GETTER GAS CONTENTAND GETTER SORPTION CAPACITY FOR BARIUM FLASH GETTERS
• ASTM F 1110 : STANDARD TEST METHOD FOR SANDWICH CORROSION TEST
• ASTM F 1111 : STANDARD TEST METHOD FOR CORROSION OF LOW-EMBRITTLING CADMIUM PLATE BY AIRCRAFT MAINTENANCE CHEMICALS
• ASTM F 1112 : STANDARD TEST METHOD FOR STATIC TESTING OF TUBELESS PNEUMATIC TIRES FOR RATE OF LOSS OF INFLATION PRESSURE
• ASTM F 1113 : STANDARD TEST METHOD FOR ELECTROCHEMICAL MEASUREMENT OF DIFFUSABLEHYDROGEN IN STEELS (BARNACLE ELECTRODE)
• ASTM F 1114 : STANDARD SPECIFICATION FOR HEAT SANITIZING COMMERCIAL POT, PAN, AND UTENSIL STATION RACK TYPE WATER-DRIVEN ROTARY SPRAY
• ASTM F 1115 : STANDARD TEST METHOD FOR DETERMINING THE CARBON DIOXIDE LOSS OF BEVERAGE CONTAINERS
• ASTM F 1116 : STANDARD TEST METHOD FOR DETRMINING DIELECTRIC STRENGTH OF DIELECTRIC FOOTWEAR (ALSO SEE ASTM FOOT)
• ASTM F 1117 : STANDARD SPECIFICATION FOR DIELECTRIC FOOTWEAR (ALSO SEE ASTM FOOT)
• ASTM F 1118 : STANDARD SPECIFICATION FOR NATIONAL AIR MEDICAL TRANSPORT UNITS RESOURCES CATALOG
• ASTM F 1119 : SPECIFICATION FOR ROTARY WING BASIC LIFE SUPPORT TRANSPORT UNITS
• ASTM F 112 : STANDARD TEST METHOD FOR SEALABILITY OF ENVELOPED GASKETS
• ASTM F 1120 : STANDARD SPECIFICATION FOR CIRCULAR METALLIC BELLOWS TYPE EXPANSION JOINTS FOR PIPING APPLICATIONS
• ASTM F 1121 : STANDARD SPECIFICATION FOR INTERNATIONAL SHORE CONNECTIONS FOR MARINE FIRE APPLICATIONS
• ASTM F 1122 : STANDARD SPECIFICATION FOR QUICK DISCONNECT COUPLINGS (6 IN. NPS AND SMALLER)
• ASTM F 1123 : STANDARD SPECIFICATION FOR NON-METALLIC EXPANSION JOINTS
• ASTM F 1124 : ROTARY WIN ADVANCED LIFE SUPPORT TRANSPORT UNITS
• ASTM F 1125 : STANDARD TERMINOLOGY OF IMAGE QUALITY IN IMPACT PRINTING SYSTEMS
• ASTM F 1126 : STANDARD SPECIFICATION FOR FOOD CUTTERS (ELECTRIC)
• ASTM F 1127 : STANDARD GUIDE FOR CONTAINMENT OF HAZARDOUS MATERIAL SPILLS BY EMERGENCY RESPONSE PERSONNEL
• ASTM F 1128 : ABRASION RESISTANCE OF TRANSPARENT PLASTICS AND COATINGS USING SALT IMPINGEMENT METHOD
• ASTM F 1129 : STANDARD GUIDE FOR USING AQUEOUS FOAMS TO CONTROL THE VAPOR HAZARDFROM IMMISCIBLE VOLATILE LIQUIDS
• ASTM F 113 : STIFFNESS TESTING OF WIRE FOR ELECTRON DEVICES AND LAMPS
• ASTM F 1130 : STANDARD PRACTICE FOR INSPECTING THE COATING SYSTEM OF A SHIP
• ASTM F 1131 : INSPECTING THE COATING SYSTEM OF A SHIP’S TANKS AND VOIDS
• ASTM F 1132 : INSPECTING THE COATING SYSTEM OF A SHIP’S DECKS AND DECK MACHINERY
• ASTM F 1133 : INSPECTING THE COATING OF A SHIP’S UNDERWATER HULL AND BOOTTOP DURING DRYDOCKING
• ASTM F 1134 : STANDARD SPECIFICATION FOR INSULATION RESISTANCE MONITOR FOR SHIPBOARD ELECTRICAL MOTORS AND GENERATORS
• ASTM F 1135 : STANDARD SPECIFICATION FOR CADMIUM OR ZINC CHROMATE ORGANIC CORROSION PROTECTIVE COATING FOR FASTERNERS
• ASTM F 1136 : STANDARD SPECIFICATION FOR ZINC/ALUMINUM CORROSION PROTECTIVE COATINGS FOR FASTENERS
• ASTM F 1136M : STANDARD SPECIFICATION FOR ZINC/ALUMINUM CORROSION PROTECTIVE COATINGS FOR FASTENERS [METRIC]
• ASTM F 1137 : STANDARD SPECIFICATION FOR PHOSPHATE/OIL AND PHOSPHATE/ORGANIC CORROSION PROTECTIVE COATINGS FOR FASTENERS
• ASTM F 1138 : STANDARD SPECIFICATION FOR SPRAY SHIELDS FOR MECHANICAL JOINTS
• ASTM F 1139 : STANDARD SPECIFICATION FOR STEAM TRAPS AND DRAINS
• ASTM F 1140 : STANDARD TEST METHODS FOR INTERNAL PRESSURIZATION FAILURE RESISTANCE OF UNRESTRAINED PACKAGES
• ASTM F 1141 : STANDARD SPECIFICATION FOR WALLCOVERING
• ASTM F 1142 : STANDARD SPECIFICATION FOR MANHOLE COVER ASSEMBLY, BOLTED, SEMI-FLUSH, OILTIGHT AND WATERTIGHT
• ASTM F 1143 : STANDARD SPECIFICATION FOR MANHOLE COVER ASSEMBLY, BOLTED, RAISED,OILTIGHT AND WATERTIGHT
• ASTM F 1144 : STANDARD SPECIFICATION FOR MANHOLE COVER ASSEMBLY, BOLTED, SEMI- FLUSH, OILTIGHT AND WATERTIGHT, HINGED
• ASTM F 1145 : STANDARD SPECIFICATION FOR TURNBUCKLES, SWAGED, WELDED, FORGED
• ASTM F 1146 : ROTARY WING SPECIALIZED MEDICAL TRANSPORT UNITS
• ASTM F 1147 : TEST METHOD FOR TENSION TESTING OF CALCIUM PHOSPHATE AND METALLIC COATINGS
• ASTM F 1148 : STANDARD CONSUMER SAFETY PERFORMANCE SPECIFICATION FOR HOME PLAYGROUND EQUIPMENT
• ASTM F 1149 : STANDARD PRACTICE FOR QUALIFICATIONS, RESPONSIBILITIES, AND AUTHORITY OF INDIVIDUALS AND INSTITUTIONS PROVIDING MEDICAL DIRECTION OF EMERGENCY MEDICAL SERVICES
• ASTM F 1150 : STANDARD SPECIFICATION FOR COMMERCIAL FOOD WASTE PULPER AND WATERPRESS ASSEMBLY
• ASTM F 1151 : STANDARD TEST METHOD FOR DETERMINING VARIATIONS IN HARDNESS OF FILM RIBBON PANCAKES
• ASTM F 1152 : STANDARD TEST METHOD FOR DIMENSIONS OF NOTCHES ON SILICON WAFERS
• ASTM F 1153 : STANDARD TEST METHOD FOR CHARACTERIZATION OF METAL-OXIDE-SILICON (MOS) STRUCTURES BY CAPACITANCE-VOLTAGE MEASUREMENTS
• ASTM F 1154 : STANDARD PRACTICES FOR QUALITATIVELY EVALUATING THE COMFORT, FIT, FUNCTION, AND INTEGRITY OF CHEMICAL-PROTECTIVE SUIT ENSEMBLES
• ASTM F 1155 : PRACTICE FOR SELECTION AND APPLICATION OF PIPING SYSTEM MATERIALS
• ASTM F 1156 : TERMINOLOGY RELATING TO PRODUCT COUNTERFEIT PROTECTION SYSTEMS
• ASTM F 1157 : STANDARD PRACTICE FOR CLASSIFYING THE RELATIVE PERFORMANCE OF THE PHYSICAL PROPERTIES OF SECURITY SEALS
• ASTM F 1158 : STANDARD GUIDE FOR INSPECTION AND EVALUATION OF TAMPERING OF SECURITY SEALS
• ASTM F 1159 : STANDARD PRACTICE FOR DESIGN AND MANUFACTURE OF PATRON DIRECTED, ARTIFICIAL CLIMBING WALLS, DRY SLIDE, COIN OPERATED AND PURPOSEFULWATER IMMERSION AMUSEMENT RIDES AND DEVICES AND AIR-SUPPORTED STRUCTURES
• ASTM F 116 : STANDARD SPECIFICATION FOR MEDICAL SCREWDRIVER BITS
• ASTM F 1160 : STANDARD TEST METHOD FOR SHEAR AND BENDING FATIGUE TESTING OF CALCIUM PHOSPHATE AND METALLIC MEDICAL AND COMPOSITE CALCIUM PHOSPATE/METALLIC COATINGS
• ASTM F 1161 : MINIMUM PERFORMANCE AND SAFETY REQUIREMENTS FOR COMPONENTS AND SYSTEMS OF ANESTHESIA GAS MACHINES
• ASTM F 1162 : STANDARD SPECIFICATION FOR POLE VAULT LANDING PITS
• ASTM F 1163 : STANDARD SPECIFICATION FOR PROTECTIVE HEADGEAR USED IN HORSE SPORTS AND HORSEBACK RIDING
• ASTM F 1164 : STANDARD TEST METHOD FOR EVALUATION OF TRANSPARENT PLASTICS EXPOSED TO ACCELERATED WEATHERING COMBINED WITH BIAXIAL STRESS
• ASTM F 1165 : STANDARD TEST METHOD FOR MEASURING ANGULAR DISPLACEMENT OF MULTIPLE IMAGES IN TRANSPARENT PARTS
• ASTM F 1166 : STANDARD PRACTICE FOR HUMAN ENGINEERING DESIGN FOR MARINE SYSTEMS,EQUIPMENT, AND FACILITIES
• ASTM F 1167 : TERMINOLOGY RELATING TO ASEPTIC PACKAGING
• ASTM F 1168 : USE IN THE ESTABLISHMENT OF THERMAL PROCESSES FOR FOODS PACKAGED IN FLEXIBLE CONTAINERS
• ASTM F 1169 : STANDARD SPECIFICATION FOR FULL-SIZE BABY CRIB
• ASTM F 117 : STANDARD TEST METHOD FOR DRIVING TORQUE OF MEDICAL BONE SCREWS
• ASTM F 1170 : STANDARD PRACTICE FOR DETERMINING THE PERFORMANCE OF A FILTER MEDIUM USING WATER AND SILICEOUS PARTICLES
• ASTM F 1172 : STANDARD SPECIFICATION FOR FUEL OIL METERS OF THE VOLUMETRIC POSITIVE DISPLACEMENT TYPE
• ASTM F 1173 : STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBERGLASS PIPE SYSTEMS TO BE USED FOR MARINE APPLICATIONS
• ASTM F 1174 : STANDARD PRACTICE FOR USING A PERSONAL COMPUTER PRINTER AS A TEST INSTRUMENT
• ASTM F 1175 : STANDARD PRACTICE FOR USING THE COMPUTER IMPACT PRINT-OUT UNIT AS A TEST INSTRUMENT FOR MANIFOLD COMPARISON
• ASTM F 1176 : STANDARD PRACTICE FOR DESIGN AND INSTALLATION OF UNDERGROUND THERMOPLASTIC IRRIGATION SYSTEMS WITH MAXIMUM WORKING PRESSURE OF 125 PSI
• ASTM F 1177 : STANDARD TERMINOLOGY RELATING TO EMERGENCY MEDICAL SERVICES
• ASTM F 1178 : STANDARD SPECIFICATION FOR PERFORMANCE OF ENAMELING SYSTEM, BAKING, METAL JOINER WORK AND FURNITURE
• ASTM F 1179 : STANDARD PRACTICE FOR INSPECTION PROCEDURE FOR USE OF ANAEROBIC THREAD LOCKING COMPOUNDS WITH STUDS
• ASTM F 118 : STANDARD DEFINITIONS OF TERMS RELATING TO GASKETS
• ASTM F 1181 : STANDARD TEST METHOD FOR MEASURING BINOCULAR DISPARITY IN TRANSPARENT PARTS
• ASTM F 1182 : STANDARD SPECIFICATION FOR ANODES, SACRIFICIAL ZINC ALLOY
• ASTM F 1183 : STANDARD SPECIFICATION FOR ALUMINIUM ALLOY CHAIN LINK FENCE FABRIC
• ASTM F 1184 : STANDARD SPECIFICATION FOR INDUSTRIAL AND COMMERCIAL HORIZONTAL SLIDE GATES
• ASTM F 1185 : STANDARD SPECIFICATION FOR COMPOSITION OF HYDROXYLAPATITE FOR SURGICAL IMPLANTS
• ASTM F 1186 : STANDARD CLASSIFICATION SYSTEM FOR CHEMICALS ACCORDING TO FUNCTIONAL GROUPS
• ASTM F 1187 : SPECIFICATION FOR FIXED WING SPECIALIZED MEDICAL TRANSPORT UNITS
• ASTM F 1188 : STANDARD TEST METHOD FOR INTERSTITIAL ATOMIC OXYGEN CONTENT OF SILICON BY INFRARED ABSORPTION WITH SHORT BASELINE
• ASTM F 1189 : USING COMPUTER-ASSISTED INFRARED SPECTROPHOTOMETRY TO MEASURE THE INTERSTITIAL OXYGEN CONTENT OF SILICON SLICES POLISHED ON BOTH SIDES
• ASTM F 119 : STANDARD TEST METHOD FOR RATE OF GREASE PENETRATION OF FLEXIBLE BARRIER MATERIALS (RAPID METHOD)
• ASTM F 1190 : STANDARD GUIDE FOR NEUTRON IRRADIATION OF UNBIASED ELECTRONIC COMPONENTS
• ASTM F 1191 : RADIATION TESTING OF SEMICONDUCTOR MEMORIES
• ASTM F 1192 : STANDARD GUIDE FOR THE MEASUREMENT OF SINGLE EVENT PHENOMENA (SEP)INDUCED BY HEAVY ION IRRADIATION OF SEMICONDUCTOR DEVICES
• ASTM F 1192M : MEASUREMENT OF SINGLE EVENT PHENOMENA (SEP) INDUCED BY HEAVY ION IRRADIATION OF SEMICONDUCTOR DEVICES [METRIC]
• ASTM F 1193 : STANDARD PRACTICE FOR QUALITY, MANUFACTURE, AND CONSTRUCTION OF AMUSEMENT RIDES AND DEVICES
• ASTM F 1194 : STANDARD GUIDE FOR DOCUMENTING THE RESULTS OF CHEMICAL PERMEATION TESTING OF MATERIALS USED IN PROTECTIVE CLOTHING
• ASTM F 1195 : STANDARD SPECIFICATION FOR RIGID LARYNGOSCOPES FOR TRACHEAL INTUBATION – HOOK ON FITTING FOR FIBERILLUMINATED BLADES AND HANDLES
• ASTM F 1196 : STANDARD SPECIFICATION FOR SLIDING WATERTIGHT DOOR ASSEMBLIES
• ASTM F 1197 : STANDARD SPECIFICATION FOR SLIDING WATERTIGHT DOOR CONTROL SYSTEMS
• ASTM F 1198 : STANDARD GUIDE FOR SHIPBOARD FIRE DETECTION SYSTEMS
• ASTM F 1199 : STANDARD SPECIFICATION FOR CAST (ALL TEMPERATURES AND PRESSURES) AND WELDED PIPE LINE STRAINERS (150 PSIG AND 150 DEGREES F MAXIMUM)
• ASTM F 12 : MICA BRIDGES FOR ELECTRON TUBES
• ASTM F 120 : DETERMINATION OF THE CONCENTRATION OF IMPURITIES IN SINGLE CRYSTAL SEMICONDUCTOR MATERIALS BY INFRARED ABSORPTION SPECTROSCOPY
• ASTM F 1200 : STANDARD SPECIFICATION FOR FABRICATED (WELDED) PIPE LINE STRAINERS(ABOVE 150 PSIG AND 150 DEGREES F)
• ASTM F 1201 : STANDARD SPECIFICATION FOR FLUID CONDITIONER FITTINGS IN PIPING APPLICATIONS ABOVE 0 DEGREES F
• ASTM F 1202 : STANDARD SPECIFICATION FOR WASHING MACHINES, HEAT SANITIZING, COMMERCIAL, POT, PAN, AND UTENSIL VERTICALLY OSCILLATING ARM TYPE
• ASTM F 1203 : STANDARD SPECIFICATION FOR WASHING MACHINES – POT, PAN, AND UTENSIL, HEAT SANITIZING, COMMERCIAL ROTARY CONVEYOR TYPE
• ASTM F 1204 : ANESTHESIA RESERVOIR BAGS
• ASTM F 1205 : STANDARD SPECIFICATION FOR ANESTHESIA BREATHING TUBES
• ASTM F 1206 : STANDARD TEST METHOD FOR EVALUATING COLOR IMAGE OUTPUT FROM COLOR PRINTERS AND COPIERS
• ASTM F 1207 : ELECTRICAL INSULATION MONITORS FOR MONITORING GROUND RESISTANCE IN ACTIVE ELECTRICAL SYSTEMS
• ASTM F 1207M : STANDARD SPECIFICATION FOR ELECTRICAL INSULATION MONITORS FOR MONITORING GROUND RESISTANCE IN ACTIVE ELECTRICAL SYSTEMS [METRIC]
• ASTM F 1208 : STANDARD SPECIFICATION FOR MINIMUM PERFORMANCE AND SAFETY REQUIREMENTS FOR ANESTHESIA BREATHING SYSTEMS
• ASTM F 1209 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF OIL SPILL DISPERSANTS IN FRESHWATER AND OTHER INLAND ENVIRONMENTS,PONDS AND SLOUGHS
• ASTM F 121 : TEST METHOD OF INTERSTITIAL ATOMIC OXYGEN CONTENT OF SILICON BY INFRARED ABSORPTION
• ASTM F 1210 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF OIL SPILL DISPERSANTS IN FRESHWATER AND OTHER INLAND ENVIRONMENTS,LAKES AND LARGE WATER BODIES
• ASTM F 1211 : STANDARD SPECIFICATION FOR SEMICONDUCTOR DEVICE PASSIVATION OPENING LAYOUTS
• ASTM F 1212 : STANDARD TEST METHOD FOR THERMAL STABILITY TESTING OF GALLIUM ARSENIDE WAFERS
• ASTM F 1213 : DETERMINING THE PARTICLE CONTAMINATION AND MEDIA MIGRATION CHARACTERISTICS OF LIQUID FILTERS BY OPTICAL MICROSCOPY
• ASTM F 1214 : WATER SOLUBILITY IN LIQUID PETROLEUM BY KARL FISCHER
• ASTM F 1215 : DETERMINING THE INITIAL EFFICIENCY OF A FLATSHEET FILTER MEDIUM IN AN AIRFLOW USING LATEX SPHERES
• ASTM F 1216 : STANDARD PRACTICE FOR REHABILITATION OF EXISTING PIPELINES AND CONDUITS BY THE INVERSION AND CURING OF A RESIN-IMPREGNATED TUBE
• ASTM F 1217 : STANDARD SPECIFICATION FOR COOKER, STEAM
• ASTM F 1218 : STANDARD SPECIFICATION FOR BRONCHOSCOPES (RIGID)
• ASTM F 1219 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAM (BASIC) TO PERFORM PATIENT INITIAL AND DETAILED ASSESSMENT
• ASTM F 122 : TEST METHOD FOR INTERSTITIAL ATOMIC OXYGEN CONTENT OF GERMANIUM BY INFRARED ABSORPTION
• ASTM F 1220 : STANDARD GUIDE FOR EMERGENCY MEDICAL SERVICES SYSTEM (EMSS) TELECOMMUNICATIONS
• ASTM F 1221 : STANDARD GUIDE FOR INTERAGENCY INFORMATION EXCHANGE
• ASTM F 1222 : HARDWARE FOR WOOD FENCING
• ASTM F 1223 : STANDARD TEST METHOD FOR DETERMINATION OF TOTAL KNEE REPLACEMENT CONSTRAINT
• ASTM F 1224 : STANDARD GUIDE FOR PROVIDING SYSTEM EVALUATION FOR EMERGENCY MEDICAL SERVICES
• ASTM F 1225 : STANDARD TEST METHOD FOR MEASURING THE RIBBON EXIT FORCE FOR FILM AND FABRIC CARTRIDGES
• ASTM F 1226 : STANDARD TEST METHOD FOR CALIBRATION OF LIQUID – BORNE PARTICLE COUNTERS FOR SUBMICROMETER PARTICLE SIZING
• ASTM F 1227 : TOTAL MASS LOSS OF MATERIALS AND CONDENSATION OF OUTGASSED VOLATILES ON MICROELECTRONICS – RELATED SUBSTRATES
• ASTM F 1228 : OXIDIZABLE (ORGANIC) CARBON ON WAFER SURFACES (BY PERSULFATE)
• ASTM F 1229 : STANDARD GUIDE FOR THE QUALIFICATION AND TRAINING OF EMS AIR MEDCIAL PATIENT CARE PROVIDERS
• ASTM F 123 : SUBSTITUTIONAL ATOMIC CARBON CONTENT OF SILICON BY INFRARED ABSORPTION
• ASTM F 1230 : MINIMUM PERFORMANCE REQUIREMENTS FOR EMERGENCY MEDICAL SERVICE (EMS) GROUND VEHICLES
• ASTM F 1231 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF OIL SPILL DISPERSANTS IN FRESHWATER AND OTHER INLAND ENVIRONMENTS,RIVERS AND CREEKS
• ASTM F 1232 : STANDARD PRACTICE FOR GENERATING A TEST PATTERN FOR SINGLE-PASS FILM RIBBONS
• ASTM F 1233 : STANDARD TEST METHOD FOR SECURITY GLAZING MATERIALS AND SYSTEMS
• ASTM F 1234 : SPECIFICATION FOR PROTECTIVE COATINGS ON STEEL FRAMEWORK FOR FENCES
• ASTM F 1235 : STANDARD CONSUMER SAFETY SPECIFICATION FOR PORTABLE HOOK-ON CHAIRS
• ASTM F 1236 : STANDARD GUIDE FOR VISUAL INSPECTION OF ELECTRICAL PROTECTIVE RUBBER PRODUCTS
• ASTM F 1237 : STANDARD SPECIFICATION FOR COMMERCIAL DISHWASHING MACHINES, MULTIPLE-TANK, CONTINUOUS OVAL-CONVEYOR TYPE, HEAT SANITIZING
• ASTM F 1238 : STANDARD SPECIFICATION FOR REFRACTORY SILICIDE SPUTTERING TARGETS FOR MICROELECTRONIC APPLICATIONS
• ASTM F 1239 : STANDARD TEST METHOD FOR OXYGEN PRECIPITATION CHARACTERISTICS OF SILICON WAFERS BY MEASUREMENT OF INTERSTITIAL OXYGEN REDUCTION
• ASTM F 1240 : STANDARD GUIDE FOR RANKING FOOTWEAR BOTTOM MATERIALS ON CONTAMINATED WALKWAY SURFACES ACCORDING TO SLIP RESISTANCE TEST RESULTS
• ASTM F 1241 : STANDARD TERMINOLOGY OF SILICON TECHNOLOGY
• ASTM F 1242 : STANDARD SPECIFICATION FOR CUFFED AND UNCUFFED TRACHEAL TUBES
• ASTM F 1243 : STANDARD SPECIFICATION FOR TRACHEAL TUBE CONNECTORS
• ASTM F 1244 : STANDARD SPECIFICATION FOR BERTHS, MARINE
• ASTM F 1245 : STANDARD SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSIONAND SELF-CLOSING TYPE, SHIPBOARD
• ASTM F 1246 : STANDARD SPECIFICATION FOR ELECTRICALLY POWERED HOME CARE VENTILATORS, PART 1–POSITIVE-PRESSURE VENTILATORS AND VENTILATOR CIRCUITS
• ASTM F 1247 : STANDARD SPECIFICATION FOR INTRUSION RESISTANT GENERIC VAULT STRUCTURES
• ASTM F 1248 : STANDARD TEST METHOD FOR DETERMINATION OF ENVIRONMENTAL STRESS CRACK RESISTANCE (ESCR) OF POLYETHYLENE PIPE
• ASTM F 1249 : STANDARD TEST METHOD FOR WATER VAPOR TRANSMISSION RATE THROUGH PLASTIC FILM AND SHEETING USING A MODULATED INFRARED SENSOR
• ASTM F 1250 : STANDARD SAFETY SPECIFICATION FOR STATIONARY EXERCISE BICYCLES
• ASTM F 1251 : STANDARD TERMINOLOGY RELATING TO POLYMERIC BIOMATERIALS IN MEDICALAND SURGICAL DEVICES
• ASTM F 1252 : STANDARD TEST METHOD FOR MEASURING OPTICAL REFLECTIVITY OF TRANSPARENT MATERIALS
• ASTM F 1253 : TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) TO PERFORM PATIENT SECONDARY ASSESSMENT
• ASTM F 1254 : STANDARD PRACTICE FOR PERFORMANCE OF PREHOSPITAL MANUAL DEFIBRILLATION
• ASTM F 1255 : STANDARD PRACTICE FOR PERFORMANCE OF PREHOSPITAL AUTOMATED DEFIBRILLATION
• ASTM F 1256 : STANDARD GUIDE FOR SELECTION AND PRACTICES OF THE EMERGENCY MEDICAL SERVICES INSTRUCTOR FOR BASIC LIFE SUPPORT/EMERGENCY MEDICAL TECHNICIAN (BLS/EMT) TRAINING PROGRAMS
• ASTM F 1257 : STANDARD GUIDE FOR SELECTION AND PRACTICE OF THE EMERGENCY MEDICALSERVICES INSTRUCTOR FOR ADVANCED LIFE SUPPORT/EMERGENCY MEDICAL TECHNICIAN (ALS/EMT) TRAINING PROGRAMS
• ASTM F 1258 : STANDARD PRACTICE FOR EMERGENCY MEDICAL DISPATCH
• ASTM F 1259 : DESIGN OF FLAT, STRAIGHT – LINE TEST STRUCTURES FOR DETECTING METALLIZATION OPEN – CIRCUIT OR RESISTANCE – INCREASE FAILURE DUE TO ELECTROMIGRATION
• ASTM F 1259M : STANDARD GUIDE FOR DESIGN OF FLAT, STRAIGHT-LINE TEST STRUCTURES FOR DETECTING METALLIZATION OPEN-CIRCUIT OR RESISTANCE-INCREASE FAILURE DUE TO ELECTROMIGRATION (METRIC)
• ASTM F 1260 : TEST METHOD FOR ESTIMATING ELECTROMIGRATION MEDIAN TIME-TO-FAILUREAND SIGMA OF INTEGRATED CIRCUIT METALLIZATIONS
• ASTM F 1260M : STANDARD TEST METHOD FOR ESTIMATING ELECTROMIGRATION MEDIAN TIME-TO-FAILURE AND SIGMA OF INTEGRATED CIRCUIT METALLIZATIONS [METRIC]
• ASTM F 1261 : DETERMINING THE AVERAGE WIDTH AND CROSS – SECTIONAL AREA OF A STRAIGHT, THIN – FILM METAL LINE
• ASTM F 1261M : STANDARD TEST METHOD FOR DETERMINING THE AVERAGE ELECTRICAL WIDTH OF A STRIAGHT, THIN-FILM METAL LINE [METRIC]
• ASTM F 1262 : TRANSIENT RADIATION UPSET THRESHOLD TESTING OF DIGITAL INTEGRATED CIRCUITS
• ASTM F 1262M : STANDARD GUIDE FOR TRANSIENT RADIATION UPSET THRESHOLD TESTING OF DIGITAL INTEGRATED CIRCUITS (METRIC)
• ASTM F 1263 : STANDARD GUIDE FOR ANALYSIS OF OVERTEST DATA IN RADIATION TESTING OF ELECTRONIC PARTS
• ASTM F 1264 : STANDARD SPECIFICATION AND TEST METHODS FOR INTRAMEDULLARY FIXATION DEVICES
• ASTM F 1265 : STANDARD TEST METHOD FOR RESISTANCE TO IMPACT FOR RESILIENT FLOOR TILE
• ASTM F 1266 : STANDARD PERFORMANCE SPECIFICATION FOR CEREBRAL STEREOTACTIC INSTRUMENTS
• ASTM F 1267 : STANDARD SPECIFICATION FOR METAL, EXPANDED, STEEL
• ASTM F 1268 : STANDARD GUIDE FOR ESTABLISHING AND OPERATING A PUBLIC INFORMATION, EDUCATION, AND RELATIONS PROGRAM FOR EMERGENCY MEDICAL SERVICE SYSTEMS
• ASTM F 1269 : STANDARD TEST METHODS FOR DESTRUCTIVE SHEAR TESTING OF BALL BONDS
• ASTM F 127 : PHOTOMASKING TECHNOLOGY FOR MICROELECTRONICS
• ASTM F 1270 : STANDARD PRACTICE FOR PREPARING AND LOCATING EMERGENCY MUSTER LISTS
• ASTM F 1271 : STANDARD SPECIFICATION FOR SPILL VALVES FOR USE IN MARINE TANK LIQUID OVERPRESSURE PROTECTIONS APPLICATIONS
• ASTM F 1272 : BALL JOINTS OF FLEXIBLE/EXPANSION TYPE FOR MARINE APPLICATIONS
• ASTM F 1273 : STANDARD SPECIFICATION FOR TANK VENT FLAME ARRESTERS
• ASTM F 1274 : FIXED WING ADVANCED LIFE SUPPORT TRANSPORT UNITS
• ASTM F 1275 : STANDARD TEST METHOD FOR PERFORMANCE OF GRIDDLES
• ASTM F 1276 : STANDARD TEST METHOD FOR CREEP RELAXATION OF LAMINATED COMPOSITE GASKET MATERIALS
• ASTM F 1277 : STANDARD TEST METHOD FOR DETERMINATION OF LEACHABLE CHLORIDE IN PACKING AND GASKETING MATERIALS BY ION-SELECTIVE ELECTRODE TECHNIQUES
• ASTM F 1278 : STANDARD GUIDE FOR USE AND HANDLING OF FLEXIBLE RETORT FOOD POUCHES IN THE PROCESSING ENVIRONMENT
• ASTM F 1279 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF OILSPILL DISPERSANTS IN FRESHWATER AND OTHER INLAND ENVIRONMENTS, PERMEABLE SURFACES
• ASTM F 128 : TESTING SLEEVES AND TUBING FOR ELECTRON TUBE CATHO
• ASTM F 1280 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR USE OF OILSPILL DISPERSANTS IN FRESHWATER AND OTHER INLAND ENVIRONMENTS, IMPERMEABLE SURFACES
• ASTM F 1281 : STANDARD SPECIFICATION FOR CROSSLINKED POLYETHYLENE/ALUMINUM/CROSSLINKED POLYETHYLENE (PEX-AL-PEX) PRESSURE PIPE
• ASTM F 1282 : STANDARD SPECIFICATION FOR POLYETHYLENE/ALUMINUM/POLYETHYLENE (PE-AL-PE) COMPOSITE PRESSURE PIPE
• ASTM F 1283 : SPECIFICATION FOR FIXED WING SPECIALIZED MEDICAL TRANSPORT UNITS
• ASTM F 1284 : STANDARD TEST METHOD FOR EVALUATING CARPET EMBEDDED DIRT REMOVAL EFFECTIVENESS OF RESIDENTIAL CENTRAL VACUUM CLEANING SYSTEMS
• ASTM F 1285 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) TO PERFORM PATIENT EXAMINATION TECHNIQUES
• ASTM F 1286 : STANDARD GUIDE FPR DEVELOPMENT AND OPERATION OF LEVEL 1 PEDIATRIC TRAUMA FACILITIES
• ASTM F 1287 : STANDARD GUIDE FOR SCOPE OF PERFORMANCE OF FIRST RESPONDERS WHO PROVIDE EMERGENCY MEDICAL CARE
• ASTM F 1288 : STANDARD GUIDE FOR PLANNING FOR AND RESPONSE TO A MULTIPLE CASULTYINCIDENT
• ASTM F 1289 : PRACTICE FOR DEVELOPMENT OF LETERATURE PERTAINING TO THE SELECTION RESIDENTIAL RESILIENT FLOOR COVERINGS
• ASTM F 129 : STANDARD PRACTICE FOR AMOUNT OF INK DEPOSIT ON CARBON PAPER AND INKED RIBBONS, OTHER THAN FABRIC TYPE
• ASTM F 1290 : STANDARD PRACTICE FOR ELECTROFUSION JOINING POLYOLEFIN PIPE AND FITTINGS
• ASTM F 1291 : STANDARD TEST METHOD FOR MEASURING THE THERMAL INSULATION OF CLOTHING USING A HEATED MANIKIN
• ASTM F 1292 : STANDARD SPECIFICATION FOR IMPACT ATTENUATION OF SURFACING MATERIALS WIHTIN THE USE ZONE OF PLAYGROUND EQUIPMENT
• ASTM F 1293 : TEST METHOD FOR EVALUATION OF COATED TRANSPARENT PLASTICS SUBJECTED TO CYCLIC FLEXURAL/THERMAL FATIQUE
• ASTM F 1294 : STANDARD TERMINOLOGY RELATING TO AUTOMATIC IDENTIFICATION HARD COPY PRINTING SYSTEMS
• ASTM F 1295 : STANDARD SPECIFICATION FOR WROUGHT TITANIUM-6ALUMINUM-7NIOBIUM ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R56700)
• ASTM F 1296 : STANDARD GUIDE FOR EVALUATING CHEMICAL PROTECTIVE CLOTHING
• ASTM F 1297 : STANDARD GUIDE FOR LOCATION AND INSTRUCTION SYMBOLS FOR EVACUATIONAND LIFESAVING EQUIPMENT
• ASTM F 1298 : STANDARD SPECIFICATION FOR FLEXIBLE, EXPANSION-TYPE BALL JOINTS FOR MARINE APPLICATIONS
• ASTM F 1299 : FOOD SERVICE EQUIPMENT HOODS FOR COOKING APPLIANCES
• ASTM F 13 : SPECIFICATION FOR DISK CATHODE ASSEMBLIES
• ASTM F 130 : TEST METHOD FOR FERRIMAGNETIC RESONANCE LINEWIDTH AND GYROMAGNETICRATIO OF NONMETALLIC MAGNETIC MATERIALS
• ASTM F 1301 : STANDARD PRACTICE FOR LABELING CHEMICAL PROTECTIVE CLOTHING
• ASTM F 1302 : ABBREVIATED MARKING OF PLASTIC CONSUMER PRODUCTS
• ASTM F 1303 : STANDARD SPECIFICATION FOR SHEET VINYL FLOOR COVERING WITH BACKING
• ASTM F 1304 : STANDARD TEST METHOD FOR DEFLECTION OF RESILIENT FLOOR TILE
• ASTM F 1305 : STANDARD GUIDE FOR THE CLASSIFICATION OF AMUSEMENT RIDE AND DEVICERELATED INJURIES AND ILLNESSES
• ASTM F 1306 : STANDARD TEST METHOD FOR SLOW RATE PENETRATION RESISTANCE OF FLEXIBLE BARRIER FILMS AND LAMINATES
• ASTM F 1307 : STANDARD TEST METHOD FOR OXYGEN TRANSMISSION RATE THROUGH DRY PACKAGES USING A COULOMETRIC SENSOR
• ASTM F 1308 : STANDARD TEST METHOD FOR QUANTITATING VOLATILE EXTRACTABLES IN MICROWAVE SUSCEPTORS USED FOR FOOD PRODUCTS
• ASTM F 1309 : STANDARD PRACTICE FOR INSTALLATION PROCEDURES FOR FITTING CHOCKS TO MARINE MACHINERY FOUNDATIONS
• ASTM F 131 : COMPLEX DIELECTRIC CONSTANT OF NONMETALLIC MAGNETI
• ASTM F 1310 : 65-GALLON DISPENSING TANK
• ASTM F 1311 : STANDARD SPECIFICATION FOR LARGE – DIAMETER FABRICATED CARBON STEEL FLANGES
• ASTM F 1312 : STANDARD SPECIFICATION FOR BRICK, INSULATING, HIGH TEMPERATURE, FIRE CLAY
• ASTM F 1313 : STANDAR SPECIFICATION FOR VOLATILE N-NITROSAMINE LEVELS IN RUBBER NIPPLES ON PACIFIERS
• ASTM F 1314 : STANDARD SPECIFICATION FOR WROUGHT NITROGEN STRENGTHENED 22 CHROMIUM – 13 NICKEL – 5 MANGANESE – 2.5 MOLYBDENUM STAINLESS STEEL ALLOY BAR AND WIRE FOR SURGICAL IMPLANTS (UNS S20910)
• ASTM F 1315 : STANDARD TEST METHOD FOR DENSITY OF A SHEET GASKET MATERIAL
• ASTM F 1316 : STANDARD TEST METHOD FOR MEASURING THE TRANSMISSIVITY OF TRANSPARENT PARTS
• ASTM F 1317 : STANDARD TEST METHOD FOR CALIBRATION OF MICROWAVE OVENS
• ASTM F 1318 : STANDARD TEST METHOD FOR DETERMINATION OF PRODUCTIVITY USING ELECTROSTATIC COPY MACHINES WITH VARIOUS CONFIGURATIONS
• ASTM F 1319 : STANDARD TEST METHOD FOR DETERMINATION OF ABRASION AND SMUDGE RESISTANCE OF IMAGES PRODUCED FROM BUSINESS COPY PRODUCTS (CROCKMETER METHOD)
• ASTM F 132 : TESTING NONMETALLIC MAGNETIC COARES TO BE USED IN
• ASTM F 1320 : STANDARD TEST METHOD FOR EVALUATING THERMAL PAPER EMPLOYING A FACSIMILE THERMAL PRINTER AS A TEST INSTRUMENT
• ASTM F 1321 : STANDARD GUIDE FOR CONDUCTING A STABILITY TEST (LIGHTWEIGHT SURVEY AND INCLINING EXPERIMENT) TO DETERMINE THE LIGHT SHIP DISPLACEMENT AND CENTERS OF GRAVITY OF A VESSEL
• ASTM F 1322 : STANDARD GUIDE FOR SELECTION OF SHIPBOARD INCINERATORS
• ASTM F 1323 : STANDARD SPECIFICATION FOR SHIPBOARD INCINERATORS
• ASTM F 1325 : STANDARD SEPCIFICATION FOR STAINLESS STEEL SUTURE NEEDLE HOLDERS-GENERAL WORKMANSHIP REQUIREMENTS AND CORRESPONDING TEST METHODS
• ASTM F 1326 : STANDARD TEST METHOD FOR MEASURING MAXIMUM DRY VOLUME OF UTILITY VACUUM CLEANERS
• ASTM F 1327 : STANDARD TERMINOLOGY RELATING TO BARRIER MATERIALS FOR MEDICAL PACKAGING
• ASTM F 1328 : GUIDE FOR TRAINING EMERGENCY MEDICAL TECHNICIAN (BASIC) TO PREPAREPATIENTS FOR MEDICAL TRANSPORTATION
• ASTM F 1329 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) IN BASIC ANATOMY AND PHYSIOLOGY
• ASTM F 133 : TEST METHOD FOR SATURATION MAGNETIZATION OR INDUCTION OF NONMETALLIC MAGNETIC MATERIALS
• ASTM F 1330 : STANDARD GUIDE FOR METALLIC ABRASIVE BLASTING TO DESCALE THE INTERIOR OF PIPE
• ASTM F 1331 : STANDARD PRACTICE FOR INSTALLATION PROCEDURES OF VINYL DECK COVERINGS ON PORTABLE PLATES IN ELECTRICAL AND ELECTRONIC SPACES
• ASTM F 1332 : STANDARD PRACTICE FOR USE OF SI (METRIC) UNITS IN MARITIME APPLICATIONS (COMMITTEE F25 SUPPLEMENT TO IEEE/ASTM SI 10)
• ASTM F 1333 : STANDARD SPECIFICATION FOR CONSTRUCTION OF FIRE AND FOAM STATION CABINETS
• ASTM F 1334 : STANDARD TEST METHOD FOR DETERMINING A-WEIGHTED SOUND POWER LEVEL OF VACUUM CLEANERS
• ASTM F 1335 : STANDARD SPECIFICATION FOR PRESSURE-RATED COMPOSITE PIPE AND FITTINGS FOR ELEVATED TEMPERATURE SERVICE
• ASTM F 1336 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) GASKETED SEWER FITTINGS
• ASTM F 1337 : STANDARD PRACTICE FOR HUMAN ENGINEERING PROGRAM REQUIREMENTS FOR SHIPS AND MARINE SYSTEMS, EQUIPMENT, AND FACILITIES
• ASTM F 1338 : STANDARD GUIDE FOR MAIN PROPULSION MEDIUM SPEED MARINE DIESEL ENGINES COVERING PERFORMANCE AND MINIMUM SCOPE OF ASSEMBLY
• ASTM F 1339 : STANDARD GUIDE FOR ORGANIZATION AND OPERATION OF EMERGENCY MEDICALSERVICES SYSTEMS
• ASTM F 134 : DETERMINING HERMETICITY OF ELECTRON DEVICES WITH A HELIUM MASS SPECTROMETER LEAK DETECTOR
• ASTM F 1340 : TEST METHOD FOR DETERMINING THE MEAN INTERFACE TRAP DENSITY OF MOSFETS BY CHARGE-PUMPING
• ASTM F 1341 : STANDARD SPECIFICATION FOR UNALLOYED TITANIUM WIRE UNS R50250, UNS R50400, UNS R50550, UNS R50700, FOR SURGICAL IMPLANT APPLICATIONS
• ASTM F 1342 : STANDARD TEST METHOD FOR PROTECTIVE CLOTHING MATERIAL RESISTANCE TO PUNCTURE
• ASTM F 1343 : STANDARD SPECIFICATION FOR ANESTHETIC GAS SCAVENGING SYSTEMS – TRANSFER AND RECEIVING SYSTEMS
• ASTM F 1344 : STANDARD SPECIFICATION FOR RUBBER FLOOR TILE
• ASTM F 1345 : STANDARD SPECIFICATION FOR ZINC-5 % ALUMINUM-MISCHMETAL ALLOY- COATED STEEL CHAIN-LINK FENCE FABRIC
• ASTM F 1346 : STANDARD PERFORMANCE SPECIFICATION FOR SAFETY COVERS AND LABELING REQUIREMENTS FOR ALL COVERS FOR SWIMMING POOLS, SPAS AND HOT TUBS
• ASTM F 1347 : STANDARD SPECIFICATION FOR MANUALLY OPERATED FUELING HOSE REELS
• ASTM F 1348/F 1348M : STANDARD SPECIFICATION FOR PNEUMATIC ROTARY DESCALING MACHINES
• ASTM F 1349 : STANDARD TEST METHOD FOR NONVOLATILE ULTRAVIOLET (UV) ABSORBING EXTRACTABLES FROM MICROWAVE SUSCEPTORS
• ASTM F 135 : EMBEDMENT STRESS CAUSED BY CASTING COMPOUNDS ON GLASS-ENCASED ELECTRONIC COMPONENTS
• ASTM F 1350 : STANDARD SPECIFICATION FOR WROUGHT 18CHROMIUM-14NICKEL-2.5 MOLYBDENUM STAINLESS STEEL SURGICAL FIXATION WIRE (UNS S31673)
• ASTM F 1351 : STANDARD PRACTICE FOR DETERMINATION OF THE EFFECT OF HARD CREASINGPAPER ON IMAGES PRODUCED BY BUSINESS IMAGING SYSTEMS
• ASTM F 1352 : STANDARD GUIDE FOR FIXED BLADE BROADHEAD PERFORMANCE AND SAFETY STANDARDS
• ASTM F 1353 : SPECIFICATION FOR FROZEN FINELY GROUND CHICKEN
• ASTM F 1354 : FROZEN PRECOOKED IMITATION CRAB PRODUCTS
• ASTM F 1355 : STANDARD GUIDE FOR IRRADIATION OF FRESH AGRICULTURAL PRODUCE AS A PHYTOSANITARY TREATMENT
• ASTM F 1356 : STANDARD PRACTICE FOR IRRADIATION OF FRESH AND FROZEN RED MEAT ANDPOULTRY TO CONTROL PATHOGENS AND OTHER MICROORGANISMS
• ASTM F 1357 : STANDARD SPECIFICATION FOR ARTICULATING TOTAL WRIST IMPLANTS
• ASTM F 1358 : STANDARD TEST METHOD FOR EFFECTS OF FLAME IMPINGEMENT ON MATERIALSUSED IN PROTECTIVE CLOTHING NOT DESIGNATED PRIMARILY FOR FLAME RESISTANCE
• ASTM F 1359 : STANDARD TEST METHOD FOR LIQUID PENETRATION RESISTANCE OF PROTECTIVE CLOTHING OR PROTECTIVE ENSEMBLES UNDER A SHOWER SPRAY WHILE ON A MANNEQUIN
• ASTM F 136 : STANDARD SPECIFICATION FOR WROUGHT TITANIUM-6ALUMINUM-4VANADIUM ELI (EXTRA LOW INTERSTITIAL) ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R56401)
• ASTM F 1360 : STANDARD SPECIFICATION FOR OVENS, MICROWAVE, ELECTRIC
• ASTM F 1361 : STANDARD TEST METHOD FOR PERFORMANCE OF OPEN DEEP FAT FRYERS
• ASTM F 1362 : STANDARD TEST METHOD FOR SHEAR STRENGTH AND SHEAR MODULUS OF AEROSPACE GLAZING INTERLAYER MATERIALS
• ASTM F 1363 : STANDARD GUIDE FOR REDUCTION OF RISK OF INJURY FOR ARCHERY OVERDRAWS
• ASTM F 1364 : STANDARD PRACTICE FOR USE OF A CALIBRATION DEVICE TO DEMONSTRATE THE INSPECTION CAPABILITY OF AN INTERFEROMETRIC LASER IMAGING NONDESTRUCTIVE TIRE INSPECTION SYSTEM
• ASTM F 1365 : STANDARD TEST METHOD FOR WATER INFILTRATION RESISTANCE OF PLASTIC UNDERGROUND CONDUIT JOINTS WHICH USE FLEXIBLE ELASTOMERIC SEALS
• ASTM F 1366 : STANDARD TEST METHOD FOR MEASURING OXYGEN CONCENTRATION IN HEAVILYDOPED SILICON SUBSTRATES BY SECONDARY ION MASS SPECTROMETRY
• ASTM F 1367 : STANDARD SPECIFICAITON FOR CHROMIUM SPUTTERING TARGETS FOR THIN FILM APPLICATIONS
• ASTM F 1368 : TEST METHOD FOR DETERMINING THE SIEVING PERFORMANCE OF A FLUID FILTER MEDIUM EMPLOYING AN AQUEOUS SUSPENSION OF MICROSPHERE AND ASPECTROPHOMETER
• ASTM F 1369 : SPECIFICATION FOR HEATERS, CONVECTION, STEAM AND HOT WATER
• ASTM F 137 : STANDARD TEST METHOD FOR FLEXIBILITY OF RESILIENT FLOORING MATERIALS WITH CYLINDRICAL MANDREL APPARATUS
• ASTM F 1370 : STANDARD SPECIFICATION FOR PRESSURE-REDUCING VALVES FOR WATER SYSTEMS, SHIPBOARD
• ASTM F 1371 : STANDARD SPECIFICATION FOR VEGETABLE PEELING MACHINES, ELECTRIC
• ASTM F 1372 : STANDARD TEST METHOD FOR SCANNING ELECTRON MICROSCOPE (SEM) ANALYSIS OF METALLIC SURFACE CONDITION FOR GAS DISTRIBUTION SYSTEMCOMPONENTS
• ASTM F 1373 : STANDARD TEST METHOD FOR DETERMINATION OF CYCLE LIFE OF AUTOMATIC VALVES FOR GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1374 : STANDARD TEST METHOD FOR IONIC/ORGANIC EXTRACTABLES OF INTERNAL SURFACES-IC/GC/FTIR FOR GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1375 : STANDARD TEST METHOD FOR ENERGY DISPERSIVE X-RAY SPECTROMETER (EDX) ANALYSIS OF METALLIC SURFACE CONDITION FOR GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1376 : STANDARD GUIDE FOR METALLURGICAL ANALYSIS FOR GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1377 : STANDARD SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM POWDER FOR COATING OF ORTHOPEDIC IMPLANTS (UNS R30075)
• ASTM F 1378 : STANDARD SPECIFICATION FOR SHOULDER PROSTHESES
• ASTM F 1379 : TERMINOLOGY RELATING TO BARBED TAPE
• ASTM F 138 : STANDARD SPECIFICATION FOR WROUGHT 18CHROMIUM-14NICKEL-2.5MOLYBDENUM STAINLESS STEEL BAR AND WIRE FORSURGICAL IMPLANTS (UNS S31673)
• ASTM F 1380 : STANDARD SPECIFICATION FOR METAL INSERT FITTINGS FOR POLYBUTYLENE (PB) TUBING
• ASTM F 1381 : STANDARD GUIDE FOR PLANNING AND DEVELOPING 9-1-1 ENHANCED TELEPHONE SYSTEMS
• ASTM F 1382 : SEARCH AND RESCUE COMPUTER SOFTWARE INFORMATION EXCHANGE
• ASTM F 1383 : STANDARD TEST METHOD FOR PERMEATION OF LIQUID AND GASES THROUGH PROTECTIVE CLOTHING MATERIALS UNDER CONDITIONS OF INTERMITTENT CONTACT
• ASTM F 1384 : TEST METHOD FOR FIRE TESTS OF MARINE JOINER DOORS
• ASTM F 1385 : STANDARD PRACTICE FOR PLATFORMS IN CARGO TANKS
• ASTM F 1386 : STANDARD GUIDE FOR CONSTRUCTION OF SOUNDING TUBE AND STRIKER PLATE FOR TANK SOUNDING
• ASTM F 1387 : STANDARD SPECIFICATION FOR PERFORMANCE OF PIPING AND TUBING MECHANICALLY ATTACHED FITTINGS
• ASTM F 1388 : TEST METHOD FOR GENERATION LIFETIME AND GENERATION VELOCITY OF SILICON MATERIAL BY CAPACITANCE-TIME MEASUREMENTS OF METAL-OXIDE- SILICON (MOS) CAPACITORS
• ASTM F 1389 : STANDARD TEST METHODS FOR PHOTOLUMINESCENCE ANALYSIS OF SINGLE CRYSTAL SILICON FOR III-V IMPURITIES
• ASTM F 139 : STANDARD SPECIFICATION FOR WROUGHT 18CHROMIUM-14NICKEL-2.5MOLYBDENUM STAINLESS STEEL SHEET AND STRIP FOR SURGICAL IMPLANTS (UNS S31673)
• ASTM F 1390 : STANDARD TEST METHOD FOR MEASURING WARP ON SILICON WAFERS BY AUTOMATED NONCONTACT SCANNING
• ASTM F 1391 : STANDARD TEST METHOD FOR SUBSTITUTIONAL ATOMIC CARBON CONTENT OF SILICON BY INFRARED ABSORPTION
• ASTM F 1392 : STANDARD TEST METHOD FOR DETERMINING NET CARRIER DENSITY PROFILES IN SILICON WAFERS BY CAPACITANCE-VOLTAGE MEASUREMENTS WITH A MERCURY PROBE
• ASTM F 1393 : STANDARD TEST METHOD FOR DETERMINING NET CARRIER DENSITY IN SILICON WAFERS BY MILLER FEEDBACK PROFILER MEASUREMENTS WITH A MERCURY PROBE
• ASTM F 1394 : STANDARD TEST METHOD FOR DETERMINATION OF PARTICLE CONTRIBUTION FROM GAS DISTRIBUTION SYSTEM VALVES
• ASTM F 1396 : STANDARD TEST METHOD FOR DETERMINATION OF OXYGEN CONTRIBUTION BY GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1397 : STANDARD TEST METHOD FOR DETERMINATION OF MOISTURE CONTRIBUTION BYGAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1398 : STANDARD TEST METHOD FOR DETERMINATION OF TOTAL HYDROCARBON CONTRIBUTION BY GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 14 : STANDARD PRACTICE FOR MAKING AND TESTING REFERENCE GLASS-METAL BEAD-SEAL
• ASTM F 140 : STANDARD PRACTICE FOR MAKING REFERENCE GLASS-METAL BUTT SEALS AND TESTING FOR EXPANSION CHARACTERISTICS BY POLARIMETRIC METHODS
• ASTM F 1404 : TEST METHOD FOR CRYSTALLOGRAPHIC PERFECTION OF GALLIUM ARSENIDE BY MOLTEN POTASSIUM HYDROXIDE (KOH) ETCH TECHNIQUE
• ASTM F 1405 : STANDARD TEST METHOD FOR DETERMINING THE DYNAMIC THERMAL RESPONSE OF DIRECT THERMAL IMAGING PRODUCTS – ATLANTEK METHOD
• ASTM F 1406 : SPECIFICATION FOR BREADED, COOKED, FROZEN CHICKEN PATTIES AND NUGGETS
• ASTM F 1407 : STANDARD TEST METHOD FOR RESISTANCE OF CHEMICAL PROTECTIVE CLOTHING MATERIALS TO LIQUID PERMEATION – PERMEATION CUP METHOD
• ASTM F 1408 : STANDARD PRACTICE FOR SUBCUTANEOUS SCREENING TEST FOR IMPLANT MATERIALS
• ASTM F 1409 : STANDARD TEST METHOD FOR STRAIGHT LINE MOVEMENT OF VACUUM CLEANERSWHILE CLEANING CARPETS
• ASTM F 141 : STANDARD TERMINOLOGY RELATING TO RESILIENT FLOOR COVERINGS
• ASTM F 1410 : STANDARD TEST METHOD FOR MEASURING MAXIMUM FUCTIONAL WET VOLUME OFUTILITY VACUUM CLEANERS
• ASTM F 1411 : STANDARD PRACTICE FOR PRESENTING SELECTED INFORMATION ON VACUUM CLEANERS FOR CONSUMER USE
• ASTM F 1412 : STANDARD SPECIFICAITON FOR POLYOLEFIN PIPE AND FITTINGS FOR CORROSIVE WASTE DRAINAGE SYSTEMS
• ASTM F 1413 : STANDARD GUIDE FOR OIL SPILL DISPERSANT APPLICATION EQUIPMENT: BOOM AND NOZZLE SYSTEMS
• ASTM F 1414 : TEST METHOD FOR MEASUREMENT OF CUT RESISTANCE TO CHAIN SAW IN LOWER BODY (LEGS) PROTECTIVE CLOTHING
• ASTM F 1415 : STANDARD SPECIFICATION FOR PULSE OXIMETERS
• ASTM F 1416 : STANDARD GUIDE FOR SELECTION OF TIME-TEMPERATURE INDICATORS
• ASTM F 1417 : STANDARD TEST METHOD FOR INSTALLATION ACCEPTANCE OF PLASTIC GRAVITY SEWER LINES USING LOW-PRESSURE AIR
• ASTM F 1418 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) IN ROLES AND RESPONSIBILITIES
• ASTM F 1419 : TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) TO MANAGE SHOCK
• ASTM F 142 : STANDARD TEST METHOD FOR INDENTATION OF RESILIENT FLOOR TILES (MCBURNEY TEST)
• ASTM F 1420 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) TO PERFORM PATIENT MANAGEMENT TECHNIQUES
• ASTM F 1421 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAN (BASIC) TO MANAGE OBSTETRICAL EMERGENCIES
• ASTM F 1422 : GUIDE FOR USING THE INCIDENT COMMAND SYSTEM FRAMEWORK IN MANAGING CIVILIAN SEARCH AND RESCUE OPERATIONS
• ASTM F 1423 : STANDARD PRACTICE FOR DETERMINATION OF THE QUALITY OF MONOCHROME IMAGES PRODUCED FROM NON-IMPACT PERSONAL COMPUTER PRINTERS
• ASTM F 1424 : STANDARD TEST METHOD FOR ESTIMATING TONER USAGE IN FULL-COLOR COPIERS UTILIZING DRY MONO- OR DUAL-COMPONENT TONERS
• ASTM F 1425 : STANDARD TEST METHOD FOR DETERMINING THE TRIBOCHARGE OF TWO-COMPONENT DEVELOPER MATERIALS
• ASTM F 1426 : STANDARD PRACTICE FOR IDENTIFYING TIRE TREAD SURFACE IRREGULAR WEAR PATTERNS RESULTING FROM TIRE USE
• ASTM F 1427 : STANDARD CONSUMER SAFETY SPECIFICATION FOR BUNK BEDS
• ASTM F 1428 : STANDARD SPECIFICATION FOR ALUMINUM PARTICLE-FILLED BASECOAT/ ORGANIC OR INORGANIC TOPCOAT, CORROSION PROTECTIVE COATINGS FOR FASTENERS
• ASTM F 1429 : STANDARD TEST METHOD FOR ASSEMBLY FORCE OF PLASTIC UNDERGROUND CONDUIT JOINTS THAT USE FLEXIBLE ELASTOMERIC SEALS LOCATED IN THE BELL
• ASTM F 143 : THICKNESS OF EPITAXIAL LAYERS OF SILICON BY MEASUR
• ASTM F 1430 : STANDARD TEST METHOD FOR ACOUSTIC EMISSION TESTING OF INSULATED AND NON-INSULATED AERIAL PERSONNEL DEVICES WITH SUPPLEMENTAL LOAD HANDLING ATTACHMENTS
• ASTM F 1431 : STANDARD SPECIFICATION FOR WATER TRAP FOR DIESEL EXHAUST
• ASTM F 1433 : STANDARD SPECIFICATION FOR MECHANICALLY REFRIGERATED SHIPBOARD AIRCONDITIONER
• ASTM F 1434 : STANDARD PRACTICE FOR ESTIMATING THE PERFORMANCE OF A FUSER OIL INAN ELECTROSTATIC COPIER OR PRINTER
• ASTM F 1435 : STANDARD SPECIFICATION FOR DESIGNATION OF THE BALANCE POINT LOCATION FOR ARCHERY ARROWS
• ASTM F 1436 : STANDARD GUIDE FOR CENTER SERVING DIAMETER DIMENSIONS FOR ARCHERY BOW STRINGS
• ASTM F 1437 : STANDARD PRACTICE FOR INCLINED CARGO TANK LADDERS
• ASTM F 1438 : STANDARD TEST METHOD FOR DETERMINATION OF SURFACE ROUGHNESS BY SCANNING TUNNELING MICROSCOPY FOR GAS DISTRIBUTION SYSTEM COMPONENTS
• ASTM F 1439 : STANDARD GUIDE FOR PERFORMANCE OF LIFETIME BIOASSAY FOR THE TUMORIGENIC POTENTIAL OF IMPLANT MATERIALS
• ASTM F 144 : STANDARD PRACTICE FOR MAKING REFERENCE GLASS-METAL SANDWICH SEAL AND TESTING FOR EXPANSION CHARACTERISTICS BY POLARIMETRIC METHODS
• ASTM F 1440 : STANDARD PRACTICE FOR CYCLIC FATIGUE TESTING OF METALLIC STEMMED HIP ARTHROPLASTY FEMORAL COMPONENTS WITHOUT TORSION
• ASTM F 1441 : STANDARD SPECIFICATION FOR SOFT-TISSUE EXPANDER DEVICES
• ASTM F 1442 : STANDARD PRACTICE FOR USING A COPIER OR PRINTER AS A TEST INSTRUMENT FOR EVALUATING PAPER PERFORMANCE
• ASTM F 1443 : STANDARD PRACTICE FOR USING 0.008-IN. (0.203-MM) APERTURE REFLECTOMETERS AS TEST INSTRUMENTS FOR MEASURING VISUAL IMAGE QUALITY OF BUSINESS COPY IMAGES
• ASTM F 1444 : STANDARD TEST METHOD FOR DETERMINING DYNAMIC THERMAL RESPONSE OF DIRECT THERMAL PAPER-LABEL PRINTER METHOD
• ASTM F 1445 : STANDARD TEST METHOD FOR DETERMINING STATIC THERMAL SENSITIVITY OFDIRECT THERMAL MEDIA
• ASTM F 1446 : STANDARD TEST METHODS FOR EQUIPMENT AND PROCEDURES USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR
• ASTM F 1447 : STANDARD SPECIFICATION FOR HELMETS USED IN RECREATIONAL BICYCLING OR ROLLER SKATING
• ASTM F 1448 : SELECTION OF SECURITY TECHNOLOGY FOR PROTECTION AGAINST COUNTERFEITING, ALTERATION, DIVERSION, DUPLICATION, SIMULATION, AND SUBSTITUTION (CADDSS) OF PRODUCTS OR DOCUMENTS
• ASTM F 1449 : STANDARD GUIDE FOR INDUSTRIAL LAUNDERING OF FLAME, THERMAL, AND ARC RESISTANT CLOTHING
• ASTM F 145 : STANDARD PRACTICE FOR EVALUATING FLAT-FACED GASKETED JOINT ASSEMBLIES
• ASTM F 1450 : STANDARD TEST METHODS FOR HOLLOW METAL SWINGING DOOR ASSEMBLIES FOR DETENTION FACILITIES
• ASTM F 1451 : TEST METHOD FOR MEASURING SORI ON SILICON WAFERS BY AUTOMATED NONCONTACT SCANNING
• ASTM F 1452 : STANDARD SPECIFICATION FOR MINIMUM PERFORMANCE AND SAFETY REQUIREMENTS FOR ANESTHETIC GAS MONITORS
• ASTM F 1453 : STANDARD GUIDE FOR TRAINING AND EVALUATION OF FIRST RESPONDERS WHO PROVIDE EMERGENCY MEDICAL CARE
• ASTM F 1454 : STANDARD PRACTICE FOR COMPARING CORRECTABLE FILM RIBBONS
• ASTM F 1455 : STANDARD GUIDE FOR SELECTION OF STRUCTURAL DETAILS FOR SHIP CONSTRUCTION
• ASTM F 1456 : STANDARD SPECIFICATION FOR MINIMUM PERFORMANCE AND SAFETY REQUIREMENTS FOR CAPNOMETERS
• ASTM F 1457 : STANDARD TERMINOLOGY RELATING TO LASER PRINTERS
• ASTM F 1458 : TEST METHOD FOR MEASUREMENT OF CUT RESISTANCE TO CHAIN SAW OF FOOTPROTECTIVE DEVICES (ALSO SEE ASTM FOOT)
• ASTM F 1459 : STANDARD TEST METHOD FOR DETERMINATION OF THE SUSCEPTIBILITY OF METALLIC MATERIALS TO HYDROGEN GAS EMBRITTLEMENT (HGE)
• ASTM F 146 : STANDARD TEST METHODS FOR FLUID RESISTANCE OF GASKET MATERIALS
• ASTM F 1460 : STANDARDPRACTICE FOR CALIBRATING OIL SPILL DISPERSANT APPLICATION EQUIPMENT BOOM AND NOZZLE SYSTEMS
• ASTM F 1461 : STANDARD PRACTICE FOR CHEMICAL PROTECTIVE CLOTHING PROGRAM
• ASTM F 1462 : STANDARD SPECIFICATION FOR OXYGEN ANALYZERS
• ASTM F 1463 : ALARM SIGNALS IN MEDICAL EQUIPMENT USED IN ANESTHESIA AND RESPIRATORY CARE
• ASTM F 1464 : STANDARD SPECIFICATION FOR OXYGEN CONCENTRATORS FOR DOMICILIARY USE
• ASTM F 1465 : STANDARD GUIDE FOR SELECTION OF SECURITY CONTROL SYSTEMS
• ASTM F 1466 : SPECIFICATION FOR IRON-NICKEL-COBALT ALLOYS FOR METAL-TO-CERAMIC SEALING APPLICATIONS
• ASTM F 1467 : STANDARD GUIDE FOR USE OF AN X-RAY TESTER (APPROXIMATELY EQUAL TO 10 KEV PHOTONS) IN IONIZING RADIATION EFFECTS TESTING OF SEMICONDUCTOR DEVICES AND MICROCIRCUITS
• ASTM F 1468 : STANDARD PRACTICE FOR EVALUATION OF METALLIC WEAPONS DETECTORS FOR CONTROLLED ACCESS SEARCH AND SCREENING
• ASTM F 1469 : STANDARD GUIDE FOR CONDUCTING A REPEATABILITY AND REPRODUCIBILITY STUDY ON TEST EQUIPMENT FOR NONDESTRUCTIVE TESTING
• ASTM F 147 : STANDARD TEST METHOD FOR FLEXIBILITY OF NON-METALLIC GASKET MATERIALS
• ASTM F 1470 : STANDARD GUIDE FOR FASTENER SAMPLING FOR SPECIFIED MECHANICAL PROPERTIES AND PERFORMANCE INSPECTION
• ASTM F 1471 : STANDARD TEST METHOD FOR AIR CLEANING PERFORMANCE OF A HIGH-EFFICIENCY PARTICULATE AIR FILTER SYSTEM
• ASTM F 1472 : STANDARD SPECIFICATION FOR WROUGHT TITANIUM-6ALUMINUM-4VANADIUM ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R56400)
• ASTM F 1473 : STANDARD TEST METHOD FOR NOTCH TENSILE TEST TO MEASURE THE RESISTANCE TO SLOW CRACK GROWTH OF POLYETHYLENE PIPES AND RESINS
• ASTM F 1474 : STANDARD TEST METHOD FOR SLOW CRACK GROWTH RESISTANCE OF NOTCHED POLYETHYLENE PLASTIC PIPE
• ASTM F 1475 : SPECIFICATION FOR DISPENSING TANKS, 250 LITRE MAXIMUM
• ASTM F 1476 : STANDARD SPECIFICATION FOR PERFORMANCE OF GASKETED MECHANICAL COUPLINGS FOR USE IN PIPING APPLICATIONS
• ASTM F 1478 : STANDARD TEST METHOD FOR DETERMINATION OF ABRASION RESISTANCE OF IMAGES PRODUCED FROM COPIERS AND PRINTERS (TABER METHOD)
• ASTM F 1479 : STANDARD TERMINOLOGY RELATING TO MICROWAVE FOOD PACKAGING
• ASTM F 148 : STANDARD TEST METHOD FOR BINDER DURABILITY OF CORK COMPOSITION GASKET MATERIALS
• ASTM F 1480 : PREPARING A CHART FOR PRESENTING RESIDENTIAL RESILIENT FLOOR COVERING INFORMATION TO THE CONSUMER
• ASTM F 1481 : STANDARD GUIDE FOR ECOLOGICAL CONSIDERATIONS FOR THE USE OF BIOREMEDIATION IN OIL SPILL RESPONSE – SAND AND GRAVEL BEACHES
• ASTM F 1482 : STANDARD PRACTICE FOR INSTALLATION AND PREPARATION OF PANEL TYPE UNDERLAYMENTS TO RECEIVE RESILIENT FLOORING
• ASTM F 1483 : STANDARD SPECIFICATION FOR ORIENTED POLY(VINYL CHLORIDE), PVCO, PRESSURE PIPE
• ASTM F 1484 : STANDARD TEST METHODS FOR PERFORMANCE OF STEAM COOKERS
• ASTM F 1486 : STANDARD PRACTICE FOR DETERMINATION OF ABRASION AND SMUDGE RESISTANCE OF IMAGES PRODUCED FORM OFFICE PRODUCTS (GA-CAT METHOD)
• ASTM F 1487 : STANDARD CONSUMER SAFETY PERFORMANCE SPECIFICATION FOR PLAYGROUND EQUIPMENT FOR PUBLIC USE
• ASTM F 1488 : STANDARD SPECIFICATION FOR COEXTRUDED COMPOSITE PIPE
• ASTM F 1489 : GUIDE FOR PERFORMANCE OF PATIENT ASSESSMENT BY THE EMERGENCY MEDICAL TECHNICIAN (PARAMEDIC)
• ASTM F 149 : STANDARD TERMINOLOGY RELATING TO OPTICAL CHARACTER RECOGNITION
• ASTM F 1490 : STANDARD TERMINOLOGY RELATING TO SEARCH AND RESCUE
• ASTM F 1491 : STANDARD SPECIFICATION FOR AN AVALANCHE BEACON FREQUENCY
• ASTM F 1492 : STANDARD SPECIFICATIONS FOR PROTECTIVE HEADGEAR USED IN SKATEBOARDING AND TRICK ROLLER SKATING
• ASTM F 1493 : STANDARD GUIDE FOR FINANCING AND FINANCIAL ACCOUNTABILITY OF MEDICAL TRANSPORTATION SYSTEMS
• ASTM F 1494 : STANDARD TERMINOLOGY RELATING TO PROTECTIVE CLOTHING
• ASTM F 1495 : COMBINATION OVEN ELECTRIC OR GAS FIRED
• ASTM F 1496 : STANDARD TEST METHOD FOR PERFORMANCE OF CONVECTION OVENS
• ASTM F 1497 : STANDARD TEST METHODS FOR DETERMINING THE LASER RESISTANCE OF THESHAFT OR TRACHEAL TUBES
• ASTM F 1498 : SPECIFICATION FOR TAPER PIPE THREADS 60 DEGREES FOR THERMOPLASTIC PIPE AND FITTINGS
• ASTM F 1499 : STANDARD SPECIFICATION FOR COEXTRUDED COMPOSITE DRAIN, WASTE, AND VENT PIPE (DWV)
• ASTM F 15 : STANDARD SPECIFICATION FOR IRON-NICKEL-COBALT SEALING ALLOY
• ASTM F 150 : STANDARD TEST METHOD FOR ELECTRICAL RESISTANCE OF CONDUCTIVE AND STATIC DISSIPATIVE RESILIENT FLOORING
• ASTM F 1500 : STANDARD TEST METHOD FOR QUANTITATING NON-UV-ABSORBING NONVOLATILEEXTRACTABLES FROM MICROWAVE SUSCEPTORS UTILIZING SOLVENTS AS FOOD SIMULANTS
• ASTM F 1501 : TENSION TESTING OF CALCIUM PHOSPHATE COATINGS
• ASTM F 1502 : STANDARD TEST METHOD FOR STATIC MEASUREMENTS ON TIRES FOR PASSENGER CARS, LIGHT TRUCKS, AND MEDIUM DUTY VEHICLES
• ASTM F 1503 : STANDARD PRACTICE FOR MACHINE/PROCESS CAPABILITY STUDY PROCEDURE
• ASTM F 1504 : STANDARD SPECIFICATION FOR FOLDED POLY (VINYL CHLORIDE) (PVC) PIPEFOR EXISTING SEWER AND CONDUIT REHABILITATION
• ASTM F 1505 : STANDARD SPECIFICATION FOR INSULATED AND INSULATING HAND TOOLS
• ASTM F 1506 : STANDARD PERFORMANCE SPECIFICATION FOR FLAME RESISTANT TEXTILE MATERIALS FOR WEARING APPAREL FOR USE BY ELECTRICAL WORKERS EXPOSED TO MOMERTARY ELECTRIC ARC AND RELATED THERMAL HAZARDS
• ASTM F 1507 : STANDARD SPECIFICATION FOR SURGE SUPPRESSORS FOR SHIPBOARD USE
• ASTM F 1508 : STANDARD SPECIFICATION FOR ANGLE STYLE, PRESSURE RELIEF VALVES FORSTEAM, GAS, AND LIQUID SERVICES
• ASTM F 1509 : STANDARD TEST METHODS FOR DETERMINING ACCEPTABILITY OF RIBBON WELDS IN FABRIC CARTRIDGES
• ASTM F 151 : STANDARD TEST METHOD FOR RESIDUAL SOLVENTS IN FLEXIBLE BARRIER MATERIALS
• ASTM F 1510 : STANDARD SPECIFICATION FOR ROTARY POSITIVE DISPLACEMENT PUMPS, SHIPS USE
• ASTM F 1511 : STANDARD SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS
• ASTM F 1512 : STANDARD PRACTICE FOR ULTRASONIC C-SCAN BOND EVALUATION OF SPUTTERING TARGET-BACKING PLATE ASSEMBLIES
• ASTM F 1513 : SPECIFICATIONS FOR PURE ALUMINUM (UNALLOYED) SOURCE MATERIAL FOR ELECTRONIC THIN FILM APPLICATIONS
• ASTM F 1514 : STANDARD TEST METHOD FOR MEASURING HEAT STABILITY OF RESILIENT FLOORING BY COLOR CHANGE
• ASTM F 1515 : STANDARD TEST METHOD FOR MEASURING LIGHT STABILITY OF RESILIENT FLOORING BY COLOR CHANGE
• ASTM F 1516 : STANDARD PRACTICE FOR SEALING SEAMS OF RESILIENT FLOORING PRODUCTSBY THE HEAT WELD METHOD (WHEN RECOMMENDED)
• ASTM F 1517 : STANDARD GUIDE FOR SCOPE OF PERFORMANCE OF EMERGENCY MEDICAL SERVICES AMBULANCE OPERATIONS
• ASTM F 1518 : STANDARD PRACTICE FOR CLEANING AND DISINFECTION OF FLEXIBLE FIBEROPTIC AND VIDEO ENDOSCOPES USED IN THE EXAMINATION OF THE HOLLOW VISCERA
• ASTM F 1519 : STANDARD TEST METHOD FOR QUALITATIVE ANALYSIS OF VOLATILE EXTRACTABLES IN MICROWAVE SUSCEPTORS USED TO HEAT FOOD PRODUCTS
• ASTM F 152 : STANDARD TEST METHODS FOR TENSION TESTING OF NONMETALLIC GASKET MATERIALS
• ASTM F 1520 : STANDARD TEST METHOD FOR DETERMINING THE DRIVE TORQUE FOR FILM ANDFABRIC RIBBON CRTRIDGES
• ASTM F 1521 : STANDARD TEST METHODS FOR PERFORMANCE OF RANGE TOPS
• ASTM F 1522 : USE OF STEAM STRIPPING PROCESS IN MITIGATING CHEMICAL SPILLS
• ASTM F 1523 : STANDARD GUIDE FOR SELECTION OF BOOMS IN ACCORDANCE WITH WATER BODY CLASSIFICATIONS
• ASTM F 1524 : STANDARD GUIDE FOR USE OF ADVANCED OXIDATION PROCESS FOR THE MITIGATION OF CHEMICAL SPILLS
• ASTM F 1525 : STANDARD GUIDE FOR USE OF MEMBRANE TECHNOLOGY IN MITIGATING HAZARDOUS CHEMICAL SPILLS
• ASTM F 1526 : STANDARD TEST METHOD FOR MEASURING SURFACE METAL CONTAMINATION ON SILICON WAFERS BY TOTAL REFLECTION X-RAY FLUORESCENCE SPECTROSCOPY
• ASTM F 1527 : STANDARD GUIDE FOR APPLICATION OF CERTIFIES REFERENCE MATERIALS AND REFERENCE WAFERS FOR CALIBRATION AND CONTROL OF INSTRUMENTS FOR MEASURING RESISTIVITY OF SILICON
• ASTM F 1528 : MEASURING BORON CONTAMINATION IN HEAVILY DOPED N-TYPE SILICON SUBSTRATES BY SECONDARY ION MASS SPECTROMETRY
• ASTM F 1529 : STANDARD TEST METHOD FOR SHEET RESISTANCE UNIFORMITY EVALUATION BYIN-LINE FOUR-POINT PROBE WITH THE DUAL-CONFIGURATION PROCEDURE
• ASTM F 153 : STANDARD TEST METHOD FOR DETERMINING THE YIELD OF WIDE INKED COMPUTER RIBBONS
• ASTM F 1530 : STANDARD TEST METHOD FOR MEASURING FLATNESS, THICHNESS, AND THICHNESS VARIATION ON SILICON WAFERS BY AUTOMATED NONCONTACT SCANNING
• ASTM F 1531 : COMPARING PRINTER OR COPIER CARTRIDGES
• ASTM F 1532 : QUALIFICATION,SELECTION,TRAINING,UTILIZATION,AND SUPERVISION OF SECURITY SCREENING PERSONNEL
• ASTM F 1533 : STANDARD SPECIFICATION FOR DEFORMED POLYETHYLENE (PE) LINER
• ASTM F 1534 : STANDARD TEST METHOD FOR DETERMINING CHANGES IN FIRE-TEST-RESPONSECHARACTERISTICS OF CUSHIONING MATERIALS AFTER WATER LEACHING
• ASTM F 1535 : STANDARD TEST METHOD FOR CARRIER RECOMBINATION LIFETIME IN SILICONWAFERS BY NONCONTACT MEASUREMENT OF PHOTCONDUCTIVITY DECAY BY MICROWAVE REFLECTANCE
• ASTM F 1536 : STANDARD TEST METHOD FOR DETERMINING STRENGTH AND SETTING TIME OF SYNTHETIC WATER-ACTIVATED POLYURETHANE FIBERGLASS ORTHOPAEDIC CASTING TAPE
• ASTM F 1537 : STANDARD SPECIFICATION FOR WROUGHT COBALT-28 CHROMIUM-6MOLYBDENUM ALLOYS FOR SURGICAL IMPLANTS (UNS R31537, UNS R31538, AND UNS R31539)
• ASTM F 1538 : STANDARD SPECIFICATION FOR GLASS AND GLASS CERAMIC BIOMATERIALS FOR IMPLANTATION
• ASTM F 1539 : CONSTANT AMPLITUDE BENDING FATIGUE TESTS OF METALLIC BONE STAPLES
• ASTM F 154 : STANDARD GUIDE FOR IDENTIFICATION OF STRUCTURES AND CONTAMINIANTS SEEN ON SPECULAR SILICON SURFACES
• ASTM F 1540 : PULL-OUT FIXATION STRENGTH OF METALLIC BONE STAPLES
• ASTM F 1541 : STANDARD SPECIFICATION AND TEST METHODS FOR EXTERNAL SKELETAL FIXATION DEVICES
• ASTM F 1542 : STANDARD SPECIFICATION FOR THE REQUIREMENTS AND DISCLOSURE OF SELF-CLOSING ANEURYSM CLIPS
• ASTM F 1543 : STANDARD SPECIFICATION FOR SHOCK ATTENUATION PROPERTIES OF FENCINGSURFACES
• ASTM F 1544 : STANDARD SPECIFICATION FOR DETERMINING THE RATING VELOCITIES OF AN ARCHERY BOW
• ASTM F 1545 : STANDARD SPECIFICATION FOR PLASTIC-LINED FERROUS METAL PIPE, FITTINGS, AND FLANGES
• ASTM F 1546 : SPECIFICATIONS FOR FIRE NOZZLES
• ASTM F 1546/F 1546M : STANDARD SPECIFICATION FOR FIRE HOSE NOZZLES
• ASTM F 1547 : STANDARD GUIDE LISTING RELEVANT STANDARDS AND PUBLICATIONS FOR COMMERCIAL SHIPBUILDING
• ASTM F 1548 : STANDARD SPECIFICATION FOR PERFORMANCE OF FITTINGS FOR USE WITH GASKETED MECHANICAL COUPLINGS USED IN PIPING APPLICATIONS
• ASTM F 1549 : STANDARD TERMINOLOGY RELATING TO UNDERWATER SEARCH,RESCUE, AND RECOVERY ACTIVITIES
• ASTM F 155 : METHOD OF TEST FOR TEMPER OF STRIP AND SHEET METALS FOR ELECTRONICDEVICES (SPRING BACK METHOD)
• ASTM F 1550 : STANDARD TEST METHOD FOR DETERMINATION OF FIRE-TEST-RESPONSE CHARACTERISTICS OF COMPONENTS OR COMPOSITES OF MATTRESSES OR FURNITURE FOR USE IN CORRECTIONAL FACILITIES AFTER EXPOSURE TO VANDALISM, BY EMPLOYING A BENCH SCALE OXYGEN CONSUMPTION CALORIMET
• ASTM F 1550M : DETERMINATION OF FIRE-TEST-RESPONSE CHARACTERISTICS OF COMPONENTS OR COMPOSITES OF MATTRESSES OF FURNITURE FOR USE IN CORRECTIONAL FACILITIES AFTER EXPOSURE TO VANDALISM, BY EMPLOYING A BENCH SCALEOXYGEN CONSUMPTION CALORIMETER [METRIC]
• ASTM F 1551 : STANDARD TEST METHODS FOR COMPREHENSIVE CHARACTERIZATION OF SYNTHETIC TURF PLAYING SURFACES AND MATERIALS
• ASTM F 1552 : STANDARD PRACTICE FOR TRAINING INSTRUCTOR QUALIFICATION AND CERTIFICATION ELIGIBILITY OF EMERGENCY MEDICAL DISPATCHERS
• ASTM F 1553 : STANDARD GUIDE FOR SPECIFYING CHAIN LINK FENCE
• ASTM F 1554 : STANDARD SPECIFICATION FOR ANCHOR BOLTS, STEEL, 36, 55, AND 105-KSI YIELD STRENGTH
• ASTM F 1555 : STANDARD GUIDE FOR CHARACTERISTICS FOR EXTERMITY SPLINTS
• ASTM F 1556 : STANDARD GUIDE FOR SPINAL IMMOBILIZATION AND EXTRICATION (SPINED) DEVICE CHARACTERISTICS
• ASTM F 1557 : STANDARD GUIDE FOR FULL BODY SPINAL IMMOBILIZATION DEVICES (FBSID)CHARACTERISTICS
• ASTM F 1558 : STANDARD GUIDE FOR CHARACTERISITCS FOR ADJUNCT CERVICAL SPINE IMMOBILIZATION DEVICES (ACSID)
• ASTM F 1559 : STANDARD GUIDE FOR CHARACTERISITICS FOR CERVICAL SPINE IMMOBILIZATION COLLAR(S) (CSIC)
• ASTM F 1560 : STANDARD PRACTICE FOR EMERGENCY MEDICAL DISPATCH MANAGEMENT
• ASTM F 1561 : STANDARD PERFORMANCE REQUIREMENTS FOR PLASTIC CHAIRS FOR OUTDOOR USE
• ASTM F 1562 : STANDARD GUIDE FOR USE-ORIENTED FOREIGN LANGUAGE INSTRUCTION
• ASTM F 1563 : STANDARD SPECIFICATION FOR TOOLS TO SQUEEZE-OFF POLYRTHYLENE (PE) GAS PIPE OR TUBING
• ASTM F 1564 : STANDARD SPECIFICATION FOR STRUCTURE-MOUNTED INSULATING WORK PLATFORMS FOR ELECTRICAL WORKERS
• ASTM F 1565 : STANDARD SPECIFICATION FOR PRESSURE-REDUCING VALVES FOR STEAM SERVICE
• ASTM F 1566 : STANDARD TEST METHODS FOR EVALUATION OF INNERSPRINGS AND BOXSPRINGS
• ASTM F 1567 : STANDARD SPECIFICATION FOR FABRICATED OR CAST AUTOMATIC SELF-CLEANING, FUEL OIL AND LUBRICATING OIL STRAINERS
• ASTM F 1568 : STANDARD SPECIFICATION FOR FOOD PROCESSORS, ELECTRIC
• ASTM F 1569 : STANDARD GUIDE FOR GENERATION OF CONSENSUS REFERENCE MATERIALS FORSEMICONDUCTOR TECHNOLOGY
• ASTM F 1570 : STANDARD TEST METHOD FOR DETERMINING THE TACTILE RATIO OF A MEMBRANE SWITCH
• ASTM F 1571 : STANDARD TEST METHOD FOR DETERMINATION OF ABRASION AND SMUDGE RESISTANCE OF IMAGES PRODUCED FROM BUSINESS COPY PRODUCTS (SUTHERLAND METHOD)
• ASTM F 1572 : STANDARD TEST METHODS FOR TIRE PERFORMANCE TESTING ON SNOW AND ICESURFACES
• ASTM F 1573 : STANDARD SPECIFICATION FOR ANESTHETIC EQUIPMENT – OROPHARYNGEAL AND NASOPHARYNGEAL AIRWAYS
• ASTM F 1574 : STANDARD TEST METHOD FOR COMPRESSIVE STRENGTH OF GASKETS AT ELEVATED TEMPERATURES
• ASTM F 1575 : STANDARD TEST METHOD FOR DETERMINING BENDING YIELD MOMENT OF NAILS
• ASTM F 1576 : SELECTION OF SECURITY CONTROL SYSTEMS PART II-DEFINING THE CENTRALCONTROL SYSTEM
• ASTM F 1577 : STANDARD TEST METHODS FOR DETENTION LOCKS FOR SWINGING DOORS
• ASTM F 1578 : STANDARD TEST METHOD FOR CONTACT CLOSURE CYCLING OF A MEMBRANE SWITCH
• ASTM F 1579 : STANDARD SPECIFICATION FOR POLYARYLETHERKETONE (PAEK) POLYMERS FOR SURGICAL IMPLANT APPLICATIONS
• ASTM F 1580 : STANDARD SPECIFICATION FOR TITANIUM AND TITANIUM-6 ALUMINUM-4 VANADIUM ALLOY POWDERS FOR COATINGS OF SURGICAL IMPLANTS
• ASTM F 1581 : STANDARD SPECIFICATION FO COMPOSITION OF ANORGANIC BONE FOR SURGICAL IMPLANTS
• ASTM F 1582 : STANDARD TERMINOLOGY RELATING TO SPINAL IMPLANTS
• ASTM F 1583 : STANDARD PRACTICE FOR COMMUNICATIONS PROCEDURES-PHONETICS
• ASTM F 1584 : STANDARD PRACTICE FOR MARKING BUILDINGS DURING DISASTER SEARCH OPERATIONS
• ASTM F 1585 : STANDARD GUIDE FOR INTEGRITY TESTING OF POROUS BARRIER MEDICAL PACKAGES
• ASTM F 1586 : STANDARD SPECIFICATION FOR WROUGHT NITROGEN STRENGTHENED 21 CHROMIUM-10 NICKEL-3 MANGANESE-2.5 MOLYBDENUM STAINLESS STEEL BAR FOR SURGICAL IMPLANTS (UNS S31675)
• ASTM F 1587 : STANDARD SPECIFICATIONS FOR HEAD AND FACE PROTECTIVE EQUIPMENT FORICE HOCKEY GOALTENDERS
• ASTM F 1588 : STANDARD TEST METHOD FOR CONSTANT TENSILE LOAD JOINT TEST (CTLJT)
• ASTM F 1589 : STANDARD TEST METHOD FOR DETERMINATION OF THE CRITICAL PRESSURE FOR RAPID CRACK PROPAGATION IN PLASTIC PIPE
• ASTM F 1590 : TRACHEOSTOMY TUBE CONNECTORS
• ASTM F 1591 : STANDARD PRACTICE FOR VISUAL SIGNALS BETWEEN PERSONS ON THE GROUNDAND IN AIRCRAFT DURING GROUND EMERGENCIES
• ASTM F 1592 : STANDARD TEST METHODS FOR DETENTION HOLLOW METAL VISION SYSTEMS
• ASTM F 1593 : STANDARD TEST METHOD FOR TRACE METALLIC IMPURITIES IN ELECTRONIC GRADE ALUMINUM BY HIGH MASS-RESOLUTION GLOW-DISCHARGE MASS SPECTROMETER
• ASTM F 1594 : STANDARD SPECIFICATION FOR PURE ALUMINUM (UNALLOYED) SOURCE MATERIAL FOR CACUUM COATING APPLICATIONS
• ASTM F 1595 : STANDARD PRACTICE FOR VIEWING CONDITIONS FOR VISUAL INSPECTION OF MEMBRANE SWITCHES
• ASTM F 1596 : STANDARD TEST METHOD FOR EXPOSURE OF MEMBRANE SWITCHES TO TEMPERATURE AND RELATIVE HUMIDITY
• ASTM F 1597 : STANDARD TEST METHOD FOR DETERMINING THE ACTUATION FORCE AND CONTACT FORCE OF A MEMBRANE SWITCH
• ASTM F 1598 : STANDARD TEST METHOD FOR DETERMINING THE EFFECTS OF CHEMICAL/SOLVENT EXPOSURE TO A MEMBRANE SWITCH/GRAPHIC OVERLAY (SPOT TEST METHOD)
• ASTM F 1599 : STANDARD GUIDE FOR COLLECTING PERFORMANCE DATA ON TEMPORARY STORAGE DEVICES
• ASTM F 16 : STANDARD TEST METHODS FOR MEASURING DIAMETER OR THICKNESS OF WIRE AND RIBBON FOR ELECTRONIC DEVICES AND LAMPS
• ASTM F 1600 : STANDARD TERMINOLOGY RELATING TO BIOREMEDIATION
• ASTM F 1601 : STANDARD TEST METHOD FOR MOTOR LIFE EVALUATION OF AN ELECTRTIC MOTORIZED NOZZLE FOR CENTRAL VACUUM CLEANING SYSTEMS
• ASTM F 1602 : STANDARD SPECIFICATION FOR KETTLES, STEAM-JACKETED, 20 TO 200 GAL (75.7 TO 757 L), FLOOR OR WALL MOUNTED, DIRECT STEAM, GAS AND ELECTRIC HEATED
• ASTM F 1603 : STANDARD SPECIFICATION FOR KETTLES, STEAM-JACKETED, 32 OZ TO 20 GAL (1 TO 75.7 L), TILTING, TABLE MOUNTED, DIRECT STEAM, GAS AND ELECTRIC HEATED
• ASTM F 1604 : STANDARD SPECIFICATION FOR FREEZERS, ICE CREAM, SOFT SERVE, SHAKE
• ASTM F 1605 : STANDARD TEST METHOD FOR PERFORMANCE OF DOUBLE-SIDED GRIDDLES
• ASTM F 1606 : STANDARD PRACTICE FOR REHABILITATION OF EXISTING SEWERS AND CONDUITS WITH DEFORMED POLYETHYLENE (PE) LINER
• ASTM F 1607 : STANDARD GUIDE FOR REPORTING OF TEST PERFORMANCE DATA FOR OIL SPILL RESPONSE PUMPS
• ASTM F 1608 : STANDARD TEST METHOD FOR MICROBIAL RANKING OF POROUS PACKAGING MATERIALS (EXPOSURE CHAMBER METHOD)
• ASTM F 1609 : STANDARD SPECIFICATION FOR CALCIUM PHOSPHATE COATINGS FOR IMPLANTABLE MATERIALS
• ASTM F 1610 : SOFT TISSUE FIXATION STRENGTH OF METALLIC BONE STAPLES
• ASTM F 1611 : STANDARD SPECIFICATION FOR INTRAMEDULLARY REAMERS
• ASTM F 1612 : STANDARD PRACTICE FOR CYCLIC FATIGUE TESTING OF METALLIC STEMMED HIP ARTHROPLASTY FEMORAL COMPONENTS WITH TORSION
• ASTM F 1613 : STANDARD SPECIFICATION FOR SURGICAL TISSUE/DRESSING/PICK-UP FORCEPS (THUMB TYPE)
• ASTM F 1614 : TEST METHOD FOR SHOCK ATTENUATING PROPERTIES OF MATERIALS SYSTEMS FOR ATHLETIC FOOTWEAR
• ASTM F 1615 : STANDARD SPECIFICATION FOR CAUTIONARY LABELING FOR FIVE-GALLON OPEN-HEAD PLASTIC CONTAINERS
• ASTM F 1616 : STANDARD GUIDE FOR SCOPE OF PERFORMANCE OF FIRST RESPONDERS WHO PRACTICE IN THE WILDERNESS OR DELAYED OR PROLONGED TRANSPORT SETTINGS
• ASTM F 1617 : STANDARD TEST METHOD FOR MEASURING SURFACE SODIUM, ALUMINUM, POTASSIUM, AND IRON ON SILICON AND EPI SUBSTRATES BY SECONDARY IONMASS SPECTROMETRY
• ASTM F 1618 : STANDARD PRACRICE FOR DETERMINATION OF UNIFORMITY OF THIN FILMS ONSILICON WAFERS
• ASTM F 1619 : STANDARD TEST METHOD FOR MEASUREMENT OF INTERSTITIAL OXYGEN CONTENT OF SILICON WAFERS BY INFRARED ABSORPTION SPECTROSCOPY WITHP-POLARIZED RADIATION INCIDENT AT THE BREWSTER ANGLE
• ASTM F 1620 : CALIBRATING A SCANNING SURFACE INSPECTION SYSTEM USING MONODISPERSE POLYSTRENE LATEX SPHERES DEPOSITED ON POLISHED OR EPITAXIAL WAFER SURFACES
• ASTM F 1621 : DETERMINING THE POSITIONAL ACCURACY CAPABILITIES OF A SCANNING SURFACE INSPECTION SYSTEM
• ASTM F 1622 : STANDARD TEST METHOD FOR MEASURING THE TORSIONAL PROPERTIES OF METALLIC BONE SCREWS
• ASTM F 1623 : STANDARD TERMINOLOGY RELATING TO THERMAL IMAGING PRODUCTS
• ASTM F 1624 : STANDARD TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE
• ASTM F 1625 : STANDARD SPECIFICATION AND TEST METHOD FOR REAR-MOUNTED BICYCLE CHILD CARRIERS
• ASTM F 1626 : STANDARD PRACTICE FOR PREPARING SHIPBOARD FIRE CONTROL PLANS
• ASTM F 1626 ADJUNCT : STEEL–STRUCTURAL, TUBES, PLATE, COATED – ADJUNCT TO F1626 PRACTICE FOR PREPARING SHIPBOARD FIRE CONTROL PLANS
• ASTM F 1627 : TRACHEOSTOMY TUBES-PEDIATRIC TRACHEOSTOMY TUBES
• ASTM F 1628 : STANDARD SPECIFICATION FOR LABELING AND MARKING OF CUFFED AND UNCUFFED TRACHEAL TUBES AND RELATED TREATMENTS INTENDED FOR USE DURING LASER SURGERY
• ASTM F 1629 : STANDARD GUIDE FOR ESTABLISHING OPERATING EMERGENCY MEDICAL SERVICES AND MANAGEMENT INFORMATION SYSTEMS, OR BOTH
• ASTM F 1630 : STANDARD TEST METHOD FOR LOW TEMPERATURE FT-IR ANALYSIS OF SINGLE CRYSTAL SILICON FOR III-V IMPURITIES
• ASTM F 1631 : IMPACT ATTENUATION PROPERTIES OF BODY PADDING AND PROTECTIVE WEAR FOR THE SPORT OF FENCING
• ASTM F 1632 : STANDARD TEST METHOD FOR PARTICLE SIZE ANALYSIS AND SAND SHAPE GRADING OF GOLF COURSE PUTTING GREEN AND SPORTS FIELD ROOTZONE MIXES
• ASTM F 1633 : STANDARD GUIDE FOR TECHNIQUES IN LAND SEARCH
• ASTM F 1634 : STANDARD PRACTICE FOR IN-VITRO ENVIRONMENTAL CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS AND IMPLANT DEVICES
• ASTM F 1635 : STANDARD TEST METHOD FOR IN VITRO DEGRADATION TESTING OF HYDROLYTICALLY DEGRADABLE POLYMER RESINS AND FABRICATED FORMS FOR SURGICAL IMPLANTS
• ASTM F 1636 : STANDARD SPECIFICATION FOR BORES AND CONES FOR MODULAR FEMORAL HEADS
• ASTM F 1637 : STANDARD PRACTICE FOR SAFE WALKING SURFACES
• ASTM F 1638 : STANDARD TERMINOLOGY FOR SURGICAL TISSUE/DRESSING/PICK-UP FORCEPS (THUMB-TYPE)
• ASTM F 1639 : STANDARD TEST METHOD FOR PERFORMANCE OF COMBINATION OVENS
• ASTM F 1640 : STANDARD GUIDE FOR SELECTION AND USE OF PACKAGING MATERIALS FOR FOODS TO BE IRRADIATED
• ASTM F 1641 : MEASURING PENETRATION RESISTANCE OF SECURITY GLAZING USING A PENDULUM IMPACTOR
• ASTM F 1642 : STANDARD TEST METHOD FOR GLAZING AND GLAZING SYSTEMS SUBJECT TO AIRBLAST LOADINGS
• ASTM F 1643 : STANDARD TEST METHODS FOR DETENTION SLIDING DOOR LOCKING DEVICE ASSEMBLY
• ASTM F 1644 : STANDARD GUIDE FOR HEALTH AND SAFETY TRAINING OF OIL SPILL RESPONDERS
• ASTM F 1645 : STANDARD TEST METHOD FOR WATER MIGRATION IN HONEYCOMB CORE MATERIALS
• ASTM F 1645/F 1645M : STANDARD TEST METHOD FOR WATER MIGRATION IN HONEYCOMB CORE MATERIALS
• ASTM F 1646 : STANDARD TERMINOLOGY RELATING TO SAFETY AND TRACTION FOR FOOTWEAR
• ASTM F 1647 : STANDARD TEST METHODS FOR ORGANIC MATTER CONTENT OF PUTTING GREEN AND SPORTS TURF ROOT ZONE MIXES
• ASTM F 1648 : STANDARD TEST METHODS FOR ARCHERY BOWSTRING COMPONENT—-SERVING STRING MATERIAL
• ASTM F 1649 : STANDARD TEST METHODS FOR EVALUATING WET BRAKING TRACTION PERFORMANCE OF PASSENGER CAR TIRES ON VEHICLES EQUIPPED WITH ANTI-LOCK BRAKING SYSTEMS
• ASTM F 1650 : STANDARD PRACTICE FOR EVALUATING TIRE TRACTION PERFORMANCE DATA UNDER VARYING TEST CONDITIONS
• ASTM F 1651 : STANDARD GUIDE FOR TRAINING THE EMERGENCY MEDICAL TECHNICIAN (PARAMEDIC)
• ASTM F 1652 : STANDARD GUIDE FOR PROVIDING ESSENTIAL DATA NEEDED IN ADVANCE FOR PREHOSPITAL EMERGENCY MEDICAL SERVICES
• ASTM F 1653 : STANDARD GUIDE FOR SCOPE OF PERFORMANCE OF TRIAGE IN A PREHOSPITALENVIRONMENT
• ASTM F 1654 : STANDARD GUIDE FOR TRAINING AND EVALUATION OF INDIVIDUALS WHO ARE RESPONSIBLE FOR OR PERFORM TRIAGE IN A PREHOSPITAL ENVIRONMENT
• ASTM F 1655 : STANDARD GUIDE FOR TRAINING FIRST RESPONDERS WHO PRACTICE IN WILDERNESS, DELAYED, OR PROLONGED TRANSPORT SETTINGS
• ASTM F 1656 : STANDARD GUIDE FOR HEALTH AND SAFETY TRAINING OF OIL SPILL RESPONDERS IN THE UNITED STATES
• ASTM F 1657 : STANDARD PRACTICE FOR EMERGENCY JOINING OF BOOMS WITH INCOMPATIBLECONNECTORS
• ASTM F 1658 : STANDARD TEST METHOD FOR SHEAR TESTING OF CALCIUM PHOSPHATE COATINGS
• ASTM F 1659 : BENDING AND SHEAR FATIGUE TESTING OF CALCIUM PHOSPHATE COATINGS ON SOLID METALLIC SUBSTRATES
• ASTM F 1660 : ELASTIC STATIC BENDING OF METALLIC BONE STAPLES
• ASTM F 1661 : STANDARD TEST METHOD FOR DETERMINING THE CONTACT BOUNCE TIME OF A MEMBRANE SWITCH
• ASTM F 1662 : STANDARD TEST METHOD FOR VERIFYING THE SPECIFIED DIELECTRIC WITHSTAND VOLTAGE AND DETERMINING THE DIELECTRIC BREAKDOWN VOLTAGEOF A MEMBRANE SWITCH
• ASTM F 1663 : STANDARD TEST METHOD FOR DETERMINING THE CAPACITANCE OF A MEMBRANCE SWITCH
• ASTM F 1664 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) AND OTHER CONFORMING ORGANIC POLYMER-COATED STEEL TENSION WIRE USED WITH CHAIN-LINK FENCE
• ASTM F 1665 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) AND OTHER CONFORMING ORGANIC POLYMER-COATED STEEL BARBED WIRE USED WITH CHAIN-LINK FENCE
• ASTM F 1666 : STANDARD SPECIFICATION FOR ADULT TRACHEOSTOMY TUBES
• ASTM F 1667 : STANDARD SPECIFICATION FOR DRIVEN FASTENERS: NAILS, SPIKES, AND STAPLES
• ASTM F 1668 : STANDARD GUIDE FOR CONSTRUCTION PROCEDURES FOR BURIED PLASTIC PIPE
• ASTM F 1669M : STANDARD SPECIFICATION FOR INSULATION MONITORS FOR SHIPBOARD ELECTRICAL SYSTEMS [METRIC]
• ASTM F 1670 : STANDARD TEST METHOD FOR RESISTANCE OF MATERIALS USED IN PROTECTIVE CLOTHING TO PENETRATION BY SYNTHETIC BLOOD
• ASTM F 1671 : STANDARD TEST METHOD FOR RESISTANCE OF MATERIALS USED IN PROTECTIVE CLOTHING TO PENETRATION BY BLOOD-BORNE PATHOGENS USING PHI-X174 BACTERIOPHAGE PENETRATION AS A TEST SYSTEM
• ASTM F 1672 : STANDARD SPECIFICATION FOR RESURFACING PATELLAR PROSTHESIS
• ASTM F 1673 : STANDARD SPECIFICATION FOR POLYVINYLIDENE FLUORIDE (PVDF) CORROSIVE WASTE DRAINAGE SYSTEMS
• ASTM F 1674 : STANDARD TEST METHOD FOR JOINT RESTRAINT PRODUCTS FOR USE WITH PVCPIPE
• ASTM F 1675 : STANDARD PRACTICE FOR LIFE-CYCLE COST ANALYSIS OF PLASTIC PIPE USED FOR CULVERTS, STORM SEWERS, AND OTHER BURIED CONDUITS
• ASTM F 1676 : STANDARD SPECIFICATION FOR BASIC TUMBLING MATS
• ASTM F 1677 : STANDARD TEST METHOD FOR USING A PORTABLE INCLINEABLE ARTICULATED STRUT SLIP TESTER (PIAST)
• ASTM F 1678 : USING A PORTABLE ARTICULATED STRUT SLIP TESTER (PAST)
• ASTM F 1679 : STANDARD TEST METHOD FOR USING A VARIABLE INCIDENCE TRIBOMETER (VIT)
• ASTM F 1680 : STANDARD TEST METHOD FOR DETERMINING CIRCUIT RESISTANCE OF A MEMBRANCE SWITCH
• ASTM F 1681 : STANDARD TEST METHOD FOR DETERMINING CURRENT CARRYING CAPACITY OF A CONDUCTOR AS PART OF A MEMBRANE SWITCH CIRCUIT
• ASTM F 1682 : STANDARD TEST METHOD FOR DETERMINING TRAVEL OF A MEMBRANE SWITCH
• ASTM F 1683 : STANDARD PRACTICE FOR CREASING OR BENDING A MEMBRANE SWITCH, MEMBRANE SWITCH FLEX TAIL ASSEMBLY OR MEMBRANE SWITCH COMPONENT
• ASTM F 1684 : STANDARD SPECIFICATION FOR IRON-NICKEL AND IRON-NICKEL-COBALT ALLOYS FOR LOW THERMAL EXPANSION APPLICATIONS
• ASTM F 1685 : STANDARD SPECIFICATION FOR PRESSURE-REDUCING MANIFOLDS FOR AIR OR NITROGEN SYSTEMS
• ASTM F 1686 : STANDARD GUIDE FOR SURVEYS TO DOCUMENT AND ASSESS OILING CONDITIONS ON SHORELINES
• ASTM F 1687 : STANDARD GUIDE FOR TERMINOLOGY AND INDICES TO DESCRIBE OILING CONDITIONS ON SHORELINES
• ASTM F 1688 : ESTIMATING OIL SPILL RECOVERY SYSTEM EFFECTIVENESS
• ASTM F 1689 : STANDARD TEST METHOD FOR DETERMINING THE INSULATION RESISTANCE OF A MEMBRANE SWITCH
• ASTM F 1690 : STANDARD SPECIFICATION FOR HUMIDIFIERS FOR MEDICAL USE – PART 1: GENERAL REQUIREMENTS FOR ACTIVE HUMIDIFICATION SYSTEMS
• ASTM F 1691 : STANDARD TEST METHOD FOR DETERMINING AXIAL PULL-OUT STRENGTH OF MEDICAL BONE SCREWS
• ASTM F 1692 : STANDARD TEST METHOD FOR LIFE EVALUATION OF A TURBINE-POWERED NOZZLE FOR HOUSEHOLD CENTRAL VACUUM CLEANING SYSTEMS
• ASTM F 1693 : STANDARD GUIDE FOR CONSIDERATION OF BIOREMEDIATION AS AN OIL SPILL RESPONSE METHOD ON LAND
• ASTM F 1694 : STANDARD GUIDE FOR COMPOSING WALKWAY SURFACE EVALUATION AND INCIDENT REPORT FORMS FOR SLIPS, STUMBLES, TRIPS, AND FALLS
• ASTM F 1695 : STANDARD TEST METHOD FOR PERFORMANCE OF UNDERFIRED BROILERS
• ASTM F 1696 : STANDARD TEST METHOD FOR ENERGY PERFORMANCE OF SINGLE-RACK, DOOR-TYPE COMMERCIAL DISHWASHING MACHINES
• ASTM F 1697 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PROFILE STRIP FOR MACHINE SPIRAL-WOUND LINER PIPE REHABILITATION OF EXISTING SEWERS AND CONDUIT
• ASTM F 1698 : STANDARD PRACTICE FOR INSTALLATION OF POLY(VINYL CHLORIDE)(PVC) PROFILE STRIP LINER AND CEMENTITIOUS GROUT FOR REHABILITATION OF EXISTING MAN-ENTRY SEWERS AND CONDUITS
• ASTM F 1699 : STANDARD CLASSIFICATION FOR PASSIVE FIBER OPTIC SEALS
• ASTM F 17 : STANDARD TERMINOLOGY RELATING TO FLEXIBLE BARRIER PACKAGING
• ASTM F 1700 : STANDARD SPECIFICATION FOR SOLID VINYL FLOOR TILE
• ASTM F 1701 : STANDARD SPECIFICATION FOR UNUSED ROPE WITH SPECIAL ELECTRICAL PROPERTIES
• ASTM F 1702 : STANDARD TEST METHOD FOR MEASURING SHOCK-ATTENUATION CHARACTERISTICS OF NATURAL PLAYING SURFACE SYSTEMS USING LIGHTWEIGHT PORTABLE APPARATUS
• ASTM F 1703 : STANDARD GUIDE FOR ICE HOCKEY PLAYING FACILITIES
• ASTM F 1704 : STANDARD TEST METHOD FOR CAPTURE AND CONTAINMENT PERFORMANCE OF COMMERCIAL KITCHEN EXHAUST VENTILATION SYSTEMS
• ASTM F 1705 : STANDARD GUIDE FOR TRAINING EMERGENCY MEDICAL SERVICES AMBULANCE OPERATIONS
• ASTM F 1706 : STANDARD PRACTICE FOR DETERMINING ENERGY CONSUMPTION OF NONIMPACT PERSONAL COMPUTER PRINTERS
• ASTM F 1707 : STANDARD PRACTICE FOR DETERMINING ENERGY CONSUMPTION OF FACSIMILE MACHINES
• ASTM F 1708 : STANDARD PRACTICE FOR EVALUATION OF GRANULAR POLYSILICON BY MELTER-ZONER SPECTROSCOPIES
• ASTM F 1709 : STANDARD SPECIFICATION FOR HIGH PURITY TITANIUM SPUTTERING TARGETSFOR ELECTRONIC THIN FILM APPLICATIONS
• ASTM F 1710 : STANDARD TEST METHOD FOR TRACE METALLIC IMPURITIES IN ELECTRONIC GRADE TITANIUM BY HIGH MASS-RESOLUTION GLOW DISCHARGE MASS SPECTROMETER
• ASTM F 1711 : STANDARD PRACTICE FOR MEASURING SHEET RESISTANCE OF THIN FILM CONDUCTORS FOR FLAT PANEL DISPLAY MANUFACTURING USING A FOUR-POINTPROBE METHOD
• ASTM F 1712 : STANDARD SPECIFICATION FOR STEEL CHAIN-LINK FENCING MATERIALS USED FOR HIGH SECURITY APPLICATIONS
• ASTM F 1713 : STANDARD SPECIFICATION FOR WROUGHT TITANIUM-13NIOBIUM-13ZIRCONIUM ALLOY FOR SURGICAL IMPLANT APPLICATIONS (UNS R58130)
• ASTM F 1714 : STANDARD GUIDE FOR GRAVIMETRIC WEAR ASSESSMENT OF PROSTHETIC HIP-DESIGNS IN SIMULATOR DEVICES
• ASTM F 1715 : STANDARD GUIDE FOR WEAR ASSESSMENT OF PROSTHETIC KNEE DESIGNS IN SIMULATOR DEVICES
• ASTM F 1716 : STANDARD GUIDE FOR TRANSITION AND PERFORMANCE OF MARINE SOFTWARE SYSTEMS MAINTENANCE
• ASTM F 1717 : STANDARD TEST METHODS FOR SPINAL IMPLANT CONSTRUCTS IN A VERTEBRECTOMY MODEL
• ASTM F 1718 : STANDARD SPECIFICATION FOR ROTARY POSITIVE DISPLACEMENT DISTILLATEFUEL PUMPS
• ASTM F 1719 : STANDARD SPECIFICATION FOR IMAGE-INTERACTIVE STEREOTACTIC AND LOCALIZATION SYSTEMS
• ASTM F 1720 : STANDARD TEST METHOD FOR MEASURING THERMAL INSULATION OF SLEEPING BAGS USING A HEATED MANIKIN
• ASTM F 1721 : STANDARD PRACTICES FOR DETERMINING STABILITY OF DIRECT THERMAL IMAGING PRODUCTS
• ASTM F 1722 : STANDARD TEST METHOD FOR DETERMINING MASS AND MOMENT OF INERTIA OF ALPINE SKIS
• ASTM F 1723 : STANDARD PRACTICE FOR EVALUATION OF POLYCRYSTALLINE SILICON RODS BY FLOAT-ZONE CRYSTAL GROWTH AND SPECTROSCOPY
• ASTM F 1724 : STANDARD TEST METHOD FOR MEASURING SURFACE METAL CONTAMINATION OF POLYCRYSTALLINE SILICON BY ACID EXTRACTION-ATOMIC ABSORBTION SPECTROSCOPY
• ASTM F 1725 : STANDARD GUIDE FOR ANALYSIS OF CRYSTALLOGRAPHIC PERFECTION OF SILICON INGOTS
• ASTM F 1726 : STANDARD GUIDE FOR ANALYSIS OF CRYSTALLOGRAPHIC PERFECTION OF SILICON WAFERS
• ASTM F 1727 : STANDARD PRACTICE FOR DETECTION OF OXIDATION INDUCED DEFECTS IN POLISHED SILICON WAFERS
• ASTM F 1728 : STANDARD PRACTICE FOR MULTIPLE PERSONS COLD WATER SURVIVAL/RESCUE TECHNIQUE: HUDDLE POSITION
• ASTM F 1729 : STANDARD PRACTICE FOR SINGLE PERSON COLD WATER SURVIVAL/RESCUE TECHNIQUE: HELP POSITION
• ASTM F 1730 : STANDARD GUIDE FOR THROWING A WATER RESCUE THROWBAG
• ASTM F 1731 : STANDARD PRACTICE FOR BODY MEASUREMENTS AND SIZING OF FIRE AND RESCUE SERVICES UNIFORMS AND OTHER THERMAL HAZARD PROTECTIVE CLOTHING
• ASTM F 1732 : STANDARD SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) SEWER AND DRAIN PIPE CONTAINING RECYCLED PVC MATERIAL
• ASTM F 1733 : STANDARD SPECIFICATION FOR BUTT HEAT FUSION POLYAMIDE(PA) PLASTIC FITTING FOR POLYAMIDE(PA) PLASTIC PIPE AND TUBING
• ASTM F 1734 : STANDARD PRACTICE FOR QUALIFICATION OF A COMBINATION OF SQUEEZE TOOL, PIPE, AND SQUEEZE-OFF PROCEDURES TO AVOID LONG-TERM DAMAGE IN POLYETHYLENE (PE) GAS PIPE
• ASTM F 1735 : STANDARD SPECIFICATION FOR POLY (VINYL CHLORIDE) (PVC) PROFILE STRIP FOR PVC LINERS FOR REHABILITATION OF EXISTING MAN-ENTRY SEWERS AND CONDUITS
• ASTM F 1736 : STANDARD GUIDE FOR IRRADIATION OF FINFISH AND AQUATIC INVERTEBRATES USED AS FOOD TO CONTROL PATHOGENS AND SPOILAGE MICROORGANISMS
• ASTM F 1737 : STANDARD GUIDE FOR USE OF OIL SPILL DISPERSANT APPLICATION EQUIPMENT DURING SPILL RESPONSE:BOOM AND NOZZLE SYSTEMS
• ASTM F 1738 : STANDARD TEST METHOD FOR DETERMINATION OF DEPOSITION OF AERIALLY APPLIED OIL SPILL DISPERSANTS
• ASTM F 1739 : STANDARD GUIDE FOR PERFORMANCE OF A WATER RESCUER-LEVEL 1
• ASTM F 1740 : STANDARD GUIDE FOR INSPECTION OF NYLON, POLYESTER, OR NYLON/POLYESTER BLEND, OR BOTH KERNMANTLE ROPE
• ASTM F 1741 : STANDARD PRACTICE FOR INSTALLATION OF MACHINE SPIRAL WOUND POLY (VINYL CHLORIDE) (PVC) LINER PIPE FOR REHABILITATION OF EXISTING SEWERS AND CONDUITS
• ASTM F 1742 : STANDARD SPECIFICATION FOR PVC INSULATING SHEETING
• ASTM F 1743 : STANDARD PRACTICE FOR REHABILITATION OF EXISTING PIPELINES AND CONDUITS BY PULLED-IN-PLACE INSTALLATION OF CURED-IN-PLACE THERMOSETTING RESIN PIPE (CIPP)
• ASTM F 1744 : STANDARD GUIDE FOR CARE AND HANDLING OF STAINLESS STEEL SURGICAL INSTRUMENTS
• ASTM F 1745 : STANDARD TEST METHOD FOR EXTERNAL FIXATOR CONNECTORS
• ASTM F 1746 : STANDARD TEST METHOD FOR DETERMING IN-PLANE COMPRESSIVE PROPERTIESOF CIRCULAR RING OR RING SEGMENT BRIDGE ELEMENTS
• ASTM F 1747 : STANDARD TEST METHOD FOR EXTERNAL FIXATOR JOINTS
• ASTM F 1748 : STANDARD TEST METHODS FOR EXTERNAL FIXATOR SUBASSEMBLIES
• ASTM F 1749 : STANDARD SPECIFICATION FOR FITNESS EQUIPMENT AND FITNESS FACILITY SAFETY SIGNAGE AND LABELS
• ASTM F 1750 : STANDARD SPECIFICATION FOR PAINTBALL MARKER THREADED-PROPELLANT SOURCE INTERFACE
• ASTM F 1751 : STANDARD SPECIFICATION FOR HELMETS USED IN RECREATIONAL ROLLER SKATING
• ASTM F 1752 : STANDARD TEST METHOD FOR ARCHERY BOW COMPONENT-CORD MATERIAL
• ASTM F 1753 : STANDARD SPECIFICATION FOR CLASSIFICATION AND MARKING OF SINGLE- LENS SCOPES FOR USE WITH ARCHERY BOWS
• ASTM F 1754 : STANDARD GUIDE FOR MARINE VESSEL STRUCTURAL INSPECTION CONSIDERATIONS
• ASTM F 1755M : STANDARD SPECIFICATION FOR SOLID STATE BARGRAPH METERS FOR SHIPBOARD USE [METRIC]
• ASTM F 1756 : STANDARD GUIDE FOR IMPLEMENTATION OF A FLEET MANAGEMENT SYSTEM NETWORK
• ASTM F 1757 : STANDARD GUIDE FOR DIGITAL COMMUNICATION PROTOCOLS FOR COMPUTERIZED SYSTEMS
• ASTM F 1758 : STANDARD TEST METHODS FOR DETENTION HINGES USED ON DETENTION-GRADESWINGING DOORS
• ASTM F 1759 : STANDARD PRACTICE FOR DESIGN OF HIGH-DENSITY POLYETHYLENE (HDPE) MANHOLES FOR SUBSURFACE APPLICATIONS
• ASTM F 1760 : STANDARD SPECIFICATION FOR COEXTRUDED POLY(VINYL CHLORIDE) (PVC) NON-PRESSURE PLASTIC PIPE HAVING REPROCESSED-RECYCLED CONTENT
• ASTM F 1761 : STANDARD TEST METHOD FOR PASS THROUGH FLUX OF CIRCULAR MAGNETIC SPUTTERING TARGETS
• ASTM F 1762 : STANDARD PRACTICE FOR EXPOSING A MEMBRANE SWITCH TO VARIATION IN ATMOSPHERIC PRESSURE
• ASTM F 1763 : STANDARD TEST METHODS FOR MEASURING CONTRAST OF A LINEAR POLARIZER
• ASTM F 1764 : STANDARD GUIDE FOR SELECTION OF HARDLINE COMMUNICATION SYSTEMS FOR CONFINED-SPACE RESCUE
• ASTM F 1765 : STANDARD GUIDE FOR ICE STAFF SELF-RESCUE TECHNIQUE
• ASTM F 1766 : STANDARD GUIDE FOR ICE AWLS SELF-RESCUE TECHNIQUE
• ASTM F 1767 : STANDARD GUIDE FOR FORMS USED FOR SEARCH AND RESCUE
• ASTM F 1768 : STANDARD GUIDE FOR USING WHISTLE SIGNALS DURING ROPE RESCUE OPERATIONS
• ASTM F 1769 : STANDARD TEST METHOD FOR MEASUREMENT OF DIFFUSIVITY, SOLUBILITY, AND PERMABILITY OF ORGANIC VAPOR BARRIERS USING A FLAME IONIZATIONDETECTOR
• ASTM F 1770 : STANDARD TEST METHOD FOR EVALUATION OF SOLUBILITY, DIFFUSIVITY, AND PERMEABILITY OF FLEXIBLE BARRIER MATERIALS TO WATER VAPOR
• ASTM F 1771 : STANDARD TEST METHOD FOR EVALUATING GATE OXIDE INTEGRITY BY VOLTAGE RAMP TECHNIQUE
• ASTM F 1772 : STANDARD SPECIFICATION FOR CLIMBING HARNESSES
• ASTM F 1773 : STANDARD TERMINOLOGY RELATING TO CLIMBING AND MOUNTAINEERING EQUIPMENT AND PRACTICES
• ASTM F 1774 : STANDARD SPECIFICATION FOR CLIMBING AND MOUNTAINEERING CARABINERS
• ASTM F 1775 : STANDARD SPECIFICATION FOR LABELING OF CLIMBING AND MOUNTAINEERINGEQUIPMENT
• ASTM F 1776 : STANDARD SPECIFICATION FOR EYE PROTECTIVE DEVICES FOR PAINTBALL SPORTS
• ASTM F 1777 : STANDARD PRACTICE FOR PAINTBALL FIELD OPERATION
• ASTM F 1778 : STANDARD GUIDE FOR SELECTION OF SKIMMERS FOR OIL-SPILL RESPONSE
• ASTM F 1779 : STANDARD PRACTICE FOR REPORTING VISUAL OBSERVATIONS OF OIL ON WATER
• ASTM F 1780 : STANDARD GUIDE FOR ESTIMATING OIL SPILL RECOVERY SYSTEM EFFECTIVENESS
• ASTM F 1781 : STANDARD SPECIFICATION FOR ELASTOMERIC FLEXIBLE HINGE FINGER TOTALJOINT IMPLANTS
• ASTM F 1782 : STANDARD PRACTICE FOR AMOUNT OF INK DEPOSIT ON FABRIC TYPE RIBBONS
• ASTM F 1783 : STANDARD GUIDE FOR PERFORMANCE OF AN ICE RESCUER – LEVEL II
• ASTM F 1784 : STANDARD TEST METHOD FOR PERFORMANCE OF A PASTA COOKER
• ASTM F 1785 : STANDARD TEST METHOD FOR PERFORMANCE OF STEAM KETTLES
• ASTM F 1786 : STANDARD TEST METHOD FOR PERFORMANCE OF BRAISING PANS
• ASTM F 1787 : STANDARD TEST METHOD FOR PERFORMANCE OF ROTISSERIE OVENS
• ASTM F 1788 : STANDARD GUIDE FOR IN-SITU BURNING OF OIL SPILLS ON WATER: ENVIRONMENTAL AND OPERATIONAL CONSIDERATIONS
• ASTM F 1789 : STANDARD TERMINOLOGY FOR F16 MECHANICAL FASTENERS
• ASTM F 1790 : STANDARD TEST METHOD FOR MEASURING CUT RESISTANCE OF MATERIALS USED IN PROTECTIVE CLOTHING
• ASTM F 1791 : STANDARD SPECIFICATION FOR FILTERS USED IN AIR OR NITROGEN SYSTEMS
• ASTM F 1792 : STANDARD SPECIFICATION FOR SPECIAL REQUIREMENTS FOR VALVES USED INGASEOUS OXYGEN SERVICE
• ASTM F 1793 : STANDARD SPECIFICATION FOR AUTOMATIC SHUT-OFF VALVES (ALSO KNOWN AS EXCESS FLOW VALVES, EFV) FOR AIR OR NITROGEN SERVICE
• ASTM F 1794 : STANDARD SPECIFICATION FOR HAND-OPERATED, GLOBE-STYLE VALVES FOR GAS (EXCEPT OXYGEN GAS) AND HYDRAULIC SYSTEMS
• ASTM F 1795 : STANDARD SPECIFICATION FOR PRESSURE-REDUCING VALVES FOIR AIR OR NITROGEN SYSTEMS
• ASTM F 1796 : STANDARD SPECIFICATION FOR HIGH VOLTAGE DETECTORS – PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 600 VOLTS AC
• ASTM F 1797 : STANDARD TEST METHOD FOR ACOUSTIC EMISSION TESTING OF INSULATED DIGGER DERRICKS
• ASTM F 1798 : STANDARD GUIDE FOR EVALUATING THE STATIC AND FATIGUE PROPERTIES OFINTERCONNECTION MECHANISMS AND SUBASSEMBLIES USED IN SPINAL ARTHRODESIS IMPLANTS
• ASTM F 1799 : STANDARD GUIDE FOR SHIPBOARD GENERATED WASTE MANAGEMENT AUDITS
• ASTM F 18 : STANDARD SPECIFICATION AND TEST METHOD FOR EVALUATION OF GLASS-TO-METAL HEADERS USED IN ELECTRON DEVICES
• ASTM F 180 : STANDARD TEST METHOD FOR DENSITY OF FINE WIRE AND RIBBON WIRE FOR ELECTRONIC DEVICES
• ASTM F 1800 : STANDARD TEST METHOD FOR CYCLIC FATIGUE OF METAL TIBIAL TRAY COMPONENTS OF TOTAL KNEE JOINT REPLACEMENTS
• ASTM F 1801 : STANDARD PRACTICE FOR CORROSION FATIGUE TESTING OF METALLIC IMPLANT MATERIALS
• ASTM F 1802 : STANDARD TEST METHOD FOR PERFORMANCE TESTING OF EXCESS FLOW VALVES
• ASTM F 1803 : STANDARD SPECIFICATION FOR POLY (VINYL CHLORIDE)(PVC) CLOSED PROFILE GRAVITY PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER
• ASTM F 1804 : STANDARD PRACTICE FOR DETERMINING ALLOWABLE TENSILE LOAD FOR POLYETHYLENE (PE) GAS PIPE DURING PULL-IN INSTALLATION
• ASTM F 1805 : STANDARD TEST METHOD FOR SINGLE WHEEL DRIVING TRACTION IN A STRAIGHT LINE ON SNOW- AND ICE-COVERED SURFACES
• ASTM F 1806 : STANDARD PRACTICE FOR TIRE TESTING OPERATIONS – BASIC CONCEPTS ANDTERMINOLOGY FOR REFERENCE TIRE USE
• ASTM F 1807 : STANDARD SPECIFICATION FOR METAL INSERT FITTINGS UTILIZING A COPPER CRIMP RING FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) TUBING
• ASTM F 1808 : STANDARD GUIDE FOR WEIGHT CONTROL TECHNICAL REQUIREMENTS FOR SURFACE SHIPS
• ASTM F 1809 : STANDARD GUIDE FOR SELECTION AND USE OF ETCHING SOLUTIONS TO DELINEATE STRUCTURAL DEFECTS IN SILICON
• ASTM F 1810 : STANDARD TEST METHOD FOR COUNTING PREFERENTIALLY ETCHED OR DECORATED SURFACE DEFECTS IN SILICON WAFERS
• ASTM F 1811 : STANDARD PRACTICE FOR ESTIMATING THE POWER SEPCTRAL DENSITY FUNCTION AND RELATED FINISH PARAMETERS FROM SURFACE PROFILE DATA
• ASTM F 1812 : STANDARD TEST METHOD FOR DETERMINING THE EFFECTIVENESS OF MEMBRANE SWITCH ESD SHIELDING
• ASTM F 1813 : STANDARD SPECIFICATION FOR WROUGHT TITANIUM – 12 MOLYBDENUM – 6 ZIRCONIUM – 2 IRON ALLOY FOR SURGICAL IMPLANT (UNS R58120)
• ASTM F 1814 : STANDARD GUIDE FOR EVALUATING MODULAR HIP AND KNEE JOINT COMPONENTS
• ASTM F 1815 : STANDARD TEST METHODS FOR SATURATED HYDRAULIC CONDUCTIVITY, WATER RETENTION, POROSITY, AND BULK DENSITY OF PUTTING GREEN AND SPORTS TURF ROOT ZONES
• ASTM F 1816 : STANDARD SAFETY SPECIFICATION FOR DRAWSTRINGS ON CHILDREN’S UPPER OUTERWEAR
• ASTM F 1817 : STANDARD TEST METHOD FOR THE PERFORMANCE OF CONVEYOR OVENS
• ASTM F 1818 : STANDARD SPECIFICATION FOR FOOT PROTECTION FOR CHAIN SAW USERS (ALSO SEE ASTM FOOT)
• ASTM F 1819 : STANDARD TEST METHOD FOR RESISTANCE OF MATERIALS USED IN PROTECTIVE CLOTHING TO PENETRATION BY SYNTHETIC BLOOD USING A MECHANICAL PRESSURE TECHNIQUE
• ASTM F 1820 : STANDARD TEST METHOD FOR DETERMINING THE AXIAL DISASSEMBLY FORCE OF A MODULAR ACETABULAR DEVICE
• ASTM F 1821 : STANDARD CONSUMER SAFETY SPECIFICATION FOR TODDLER BEDS
• ASTM F 1822 : STANDARD CONSUMER SAFETY SPECIFICATION FOR NON-FULL-SIZE BABY CRIBS
• ASTM F 1823 : STANDARD GUIDE FOR WATER RESCUE PERSONAL FLOTATION DEVICE (PFD)
• ASTM F 1824 : STANDARD GUIDE FOR PERFORMANCE OF A WATER RESCUER – LEVEL II
• ASTM F 1825 : STANDARD SPECIFICATION FOR CLAMPSTICK TYPE LIVE LINE TOOLS
• ASTM F 1826 : STANDARD SPECIFICATION FOR LIVE LINE AND MEASURING TELESCOPING TOOLS
• ASTM F 1827 : STANDARD TERMINOLOGY RELATING TO FOOD SERVICE EQUIPMENT
• ASTM F 1828 : STANDARD SPECIFICATION FOR URETERAL STENTS
• ASTM F 1829 : STANDARD TEST METHOD FOR STATIC EVALUATION OF GLENOID LOCKING MECHANISM IN SHEAR
• ASTM F 1830 : STANDARD PRACTICE FOR SELECTION OF BLOOD FOR IN VITRO EVALUATION OF BLOOD PUMPS
• ASTM F 1831 : STANDARD SPECIFICATION FOR CRANIAL TRACTION TONGS AND HALO EXTERNAL SPINAL IMMOBILIZATION DEVICES
• ASTM F 1832 : STANDARD TEST METHOD FOR DETERMINING THE FORCE-DRAW AND LET-DOWN CURVES FOR ARCHERY BOWS
• ASTM F 1833 : STANDARD TEST METHOD FOR COMPARISON OF REARFOOT MOTION CONTROL PROPERTIES OF RUNNING SHOES
• ASTM F 1834 : STANDARD GUIDE FOR CONSIDERATION OF ANAEROBIC BIOREMEDIATION AS A CHEMICAL POLLUTANT MITIGATION METHOD ON LAND
• ASTM F 1835 : STANDARD GUIDE FOR CABLE SPLICING INSTALLATIONS
• ASTM F 1836M : STANDARD SPECIFICATION FOR STUFFING TUBES, NYLON, AND PACKING ASSEMBLIES (METRIC)
• ASTM F 1837M : STANDARD SPECIFICATION FOR HEAT-SHRINK CABLE ENTRY SEALS (METRIC)
• ASTM F 1838 : STANDARD PERFORMANCE REQUIREMENTS FOR CHILD’S PLASTIC CHAIRS FOR OUTDOOR USE
• ASTM F 1879 : STANDARD GUIDE FOR DEMONSTRATING OBEDIENCE AND AGILITY IN SEARCH AND RESCUE DOGS
• ASTM F 1880 : STANDARD TEST METHOD FOR THE DETERMINATION OF PERCENT OF LET-OFF FOR ARCHERY BOWS
• ASTM F 1881 : STANDARD TEST METHOD FOR MEASURING BASEBALL BAT PERFORMANCE FACTOR
• ASTM F 1882 : STANDARD SPECIFICATION FOR RESIDENTIAL BASKETBALL SYSTEMS
• ASTM F 1883 : STANDARD PRACTICE FOR SELECTION OF WIRE AND CALBE SIZE IN AWG OR METRIC UNITS
• ASTM F 1884 : STANDARD TEST METHODS FOR DETERMINING RESIDUAL SOLVENTS IN PACKAGING MATERIALS
• ASTM F 1885 : STANDARD GUIDE FOR IRRADIATION OF DRIED SPICES, HERBS, AND VEGETABLE SEASONINGS TO CONTROL PATHOGENS AND OTHER MICROORGANISMS
• ASTM F 1886 : STANDARD TEST METHOD FOR DETERMINING INTEGRITY OF SEALS FOR MEDICAL PACKAGING BY VISUAL INSPECTION
• ASTM F 1887 : STANDARD TEST METHOD FOR MEASURING THE COEFFICIENT OF RESTITUTION (COR) OF BASEBALLS AND SOFTBALLS
• ASTM F 1888 : TEST METHOD FOR COMPRESSION-DISPLACEMENT OF BASEBALLS AND SOFTBALLS
• ASTM F 1889 : STANDARD GUIDE FOR STRAIGHTNESS MEASUREMENT OF ARROW SHAFTS
• ASTM F 1890 : STANDARD TEST METHOD FOR MEASURING SOFTBALL BAT PERFORMANCE FACTOR
• ASTM F 1891 : STANDARD SPECIFICATION FOR ARC AND FLAME RESISTANT RAINWEAR
• ASTM F 1892 : STANDARD GUIDE FOR IONIZING RADIATION (TOTAL DOSE) EFFECTS TESTINGOF SEMICONDUCTOR DEVICES
• ASTM F 1893 : GUIDE FOR MEASUREMENT OF IONIZING DOSE-RATE BURNOUT OF SEMICONDUCTOR DEVICES
• ASTM F 1894 : TEST METHOD FOR QUANTIFYING TUNGSTEN SILICIDE SEMICONDUCTOR PROCESS FILMS FOR COMPOSITION AND THICKNESS
• ASTM F 1895 : PRACTICE FOR SUBMERSION OF A MEMBRANE SWITCH
• ASTM F 1896 : TEST METHOD FOR DETERMINING THE ELECTRICAL RESISTIVITY OF A PRINTED CONDUCTIVE MATERIAL
• ASTM F 1897 : STANDARD SPECIFICATION FOR LEG PROTECTION FOR CHAIN SAW USERS
• ASTM F 1898 : STANDARD SPECIFICATION FOR BICYCLE HELMETS USED BY INFANTS AND TODDLERS
• ASTM F 1899 : STANDARD SPECIFICATION FOR FOOD WASTE PULPER WITHOUT WATERPRESS ASSEMBLY
• ASTM F 19 : STANDARD TEST METHOD FOR TENSION AND VACUUM TESTING METALLIZED CERAMIC SEALS
• ASTM F 1900 : STANDARD TEST METHOD FOR WATER RESISTANCE OF FOOTWEAR USING A WALKING STEP SIMULATOR
• ASTM F 1901 : STANDARD SPECIFICATION FOR POLYETHYLENE (PE) PIPE AND FITTINGS FORROOF DRAIN SYSTEMS
• ASTM F 1903 : STANDARD PRACTICE FOR TESTING FOR BIOLOGICAL RESPONSES TO PARTICLES IN VITRO
• ASTM F 1904 : STANDARD PRACTICE FOR TESTING THE BIOLOGICAL RESPONSES TO PARTICLES IN VIVO
• ASTM F 1905 : STANDARD PRACTICE FOR SELECTING TESTS FOR DETERMINING THE PROPENSITY OF MATERIALS TO CAUSE IMMUNOTOXICITY
• ASTM F 1906 : STANDARD PRACTICE FOR EVALUATION OF IMMUNE RESPONSES IN BIOCOMPATIBILITY TESTING USING ELISA TESTS, LYMPHOCYTE PROLIFERATION, AND CELL MIGRATION
• ASTM F 1908 : STANDARD GUIDE FOR FENCES FOR RESIDENTIAL OUTDOOR SWIMMING POOLS, HOT TUBS, AND SPAS
• ASTM F 1909 : STANDARD SPECIFICATION FOR PREFORMED OPEN-–CELL SPONGE RUBBER PAIL AND DRUM GASKETS
• ASTM F 1910 : STANDARD SPECIFICATION FOR LONG BARBED TAPE OBSTACLES
• ASTM F 1911 : STANDARD PRACTICE FOR INSTALLATION OF BARBED TAPE
• ASTM F 1912 : STANDARD SPECIFICATION FOR SAFETY OF BEAN BAG CHAIRS
• ASTM F 1913 : STANDARD SPECIFICATION FOR VINYL SHEET FLOOR COVERING WITHOUT BACKING
• ASTM F 1914 : STANDARD TEST METHODS FOR SHORT-TERM INDENTATION AND RESIDUAL INDENTATION OF RESILIENT FLOOR COVERING
• ASTM F 1915 : STANDARD TEST METHODS FOR GLAZING FOR DETENTION FACILITIES
• ASTM F 1916 : STANDARD SPECIFICATION FOR SELECTING CHAIN LINK BARRIER SYSTEMS WITH COATED CHAIN LINK FENCE FABRIC AND ROUND POSTS FOR DETENTION APPLICATIONS
• ASTM F 1917 : STANDARD CONSUMER SAFETY PERFORMANCE SPECIFICATION FOR INFANT BEDDING AND RELATED ACCESSORIES
• ASTM F 1918 : STANDARD SAFETY PERFORMANCE SPECIFICATION FOR SOFT CONTAINED PLAY EQUIPMENT
• ASTM F 1919 : STANDARD SPECIFICATION FOR GRIDDLES, SINGLE AND DOUBLE SIDED, SELF-HEATING, COUNTER OR STAND MOUNTED GAS AND ELECTRIC FIRED
• ASTM F 1920 : STANDARD TEST METHOD FOR PERFORMANCE OF RACK CONVEYOR, COMMERCIAL DISHWASHING MACHINES
• ASTM F 1921 : STANDARD TEST METHODS FOR HOT SEAL STRENGTH (HOT TACK) OF THERMOPLASTIC POLYMERS AND BLENDS COMPRISING THE SEALING SURFACES OF FLEXIBLE WEBS
• ASTM F 1922 : STANDARD TEST METHOD FOR TIRES, PNEUMATIC, VEHICULAR, HIGHWAY
• ASTM F 1923 : STANDARD TEST METHOD FOR TIRES, PNEUMATIC, LOW SPEED, OFF HIGHWAY
• ASTM F 1924 : STANDARD SPECIFICATION FOR PLASTIC MECHANICAL FITTINGS FOR USE ON OUTSIDE DIAMETER CONTROLLED POLYETHYLENE GAS DISTRIBUTION PIPE ANDTUBING
• ASTM F 1925 : STANDARD SPECIFICATION FOR VIRGIN POLY(L-LACTIC ACID) RESIN FOR SURGICAL IMPLANTS
• ASTM F 1926 : STANDARD TEST METHOD FOR EVALUATION OF THE ENVIRONMENTAL STABILITYOF CALCIUM PHOSPHATE COATINGS
• ASTM F 1927 : STANDARD TEST METHOD FOR DETERMINATION OF OXYGEN GAS TRANSMISSION RATE, PERMEABILITY AND PERMEANCE AT CONTROLLED RELATIVE HUMIDITY THROUGH BARRIER MATERIALS USING A COULOMETRIC DETECTOR
• ASTM F 1928 : STANDARD SAFETY GUIDE FOR CONSUMER RECREATIONAL USE OF FUN-KARTS
• ASTM F 1929 : STANDARD TEST METHOD FOR DETECTING SEAL LEAKS IN POROUS MEDICAL PACKAGING BY DYE PENETRATION
• ASTM F 1930 : STANDARD TEST METHOD FOR EVALUATION OF FLAME RESISTANT CLOTHING FOR PROTECTION AGAINST FLASH FIRE SIMULATIONS USING AN INSTRUMENTED MANIKIN
• ASTM F 1931 : STANDARD TEST METHOD FOR CHARACTERIZATION OF GYMNASTIC LANDING MATS AND FLOOR EXERCISE SURFACES
• ASTM F 1932 : STANDARD TEST METHOD FOR MEASURING SLEEPING BAG LOFT
• ASTM F 1933 : STANDARD SPECIFICATION FOR ILLUSTRATING THE FOOTPRINT OF A BACKPACKING OR MOUNTAINEERING TENT
• ASTM F 1934 : STANDARD TEST METHOD FOR WEIGHING A BACKPACKING OR MOUNTAINEERING TENT
• ASTM F 1935 : STANDARD TEST METHOD FOR MEASURING THE HEADROOM OF A BACKPACKING OR MOUNTAINEERING TENT
• ASTM F 1936 : STANDARD SPECIFICATION FOR SHOCK-ABSORBING PROPERTIES OF NORTH AMERICAN FOOTBALL FIELD PLAYING SYSTEMS AS MEASURED IN THE FIELD
• ASTM F 1937 : STANDARD SPECIFICATION FOR BODY PROTECTORS USED IN HORSE SPORTS AND HORSEBACK RIDING
• ASTM F 1938 : GUIDE FOR SAFER USE OF MOVABLE SOCCER GOALS
• ASTM F 1939 : STANDARD TEST METHOD FOR RADIANT HEAT RESISTANCE OF FLAME RESISTANT CLOTHING MATERIALS WITH CONTINUOUS HEATING
• ASTM F 1940 : STANDARD TEST METHOD FOR PROCESS CONTROL VERIFICATION TO PREVENT HYDROGEN EMBRITTLEMENT IN PLATED OR COATED FASTENERS
• ASTM F 1941 : STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS ON THREADED FASTENERS (UNIFIED INCH SCREW THREAD (UN/UNR))
• ASTM F 1941M : STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS ON THREADED FASTENERS [METRIC]
• ASTM F 1942 : STANDARD PRACTICE FOR CREATING TEST TARGETS FOR DETERMINING THE INK YEILD OF IMAGING SUPPLIES USED IN INK JET PRINTERS
• ASTM F 1943 : STANDARD TEST METHOD FOR DETERMINING THE DYNAMIC THERMAL RESPONSE OF THERMAL MASS TRANSFER RIBBON PRODUCTS – ATLANTEK METHOD
• ASTM F 1944 : STANDARD PRACTICE FOR DETERMINING THE QUALITY OF THE TEXT, LINE- AND SOLID-FILL OUTPUT PRODUCED BY INK JET PRINTERS
• ASTM F 1945 : STANDARD PRACTICE FOR DETERMINING THE LIGHTFASTNESS OF INK JET PRINTS EXPOSED TO INDOOR FLUORESCENT LIGHTING
• ASTM F 1946 : STANDARD PRACTICE FOR DETERMINING THE LIGHTFASTNESS OF INK JET PRINTS EXPOSED TO INDOOR FLUORESCENT LIGHTING AND WINDOW-FILTERED DAYLIGHT
• ASTM F 1947 : STANDARD PRACTICE FOR INSTALLATION OF FOLDED POLY (VINYL CHLORIDE)(PVC) PIPE INTO EXISTING SEWERS AND CONDUITS
• ASTM F 1948 : STANDARD SPECIFICATION FOR METALLIC MECHANICAL FITTINGS FOR USE ONOUTSIDE DIAMETER CONTROLLED THERMOPLASTIC GAS DISTRIBUTION PIPE AND TUBING
• ASTM F 1949 : STANDARD SPECIFICATION FOR MEDICAL OXYGEN DELIVERY SYSTEMS FOR EMSGROUND VEHICLES
• ASTM F 1950 : STANDARD SPECIFICATION FOR PHYSICAL INFORMATION TO BE TRANSFERRED WITH USED AMUSEMENT RIDES AND DEVICES
• ASTM F 1951 : SPECIFICATION FOR DETERMINATION OF ACCESSIBILITY OF SURFACE SYSTEMS UNDER AND AROUND PLAYGROUND EQUIPMENT
• ASTM F 1952 : STANDARD SPECIFICATION FOR HELMETS USED FOR DOWN HILL MOUNTAIN BICYCLE RACING
• ASTM F 1953 : STANDARD GUIDE FOR CONSTRUCTION AND MAINTENANCE OF GRASS TENNIS COURTS
• ASTM F 1955 : STANDARD TEST METHOD FOR FLAMMABILITY OF SLEEPING BAGS
• ASTM F 1956 : STANDARD SPECIFICATION FOR RESCUE CARABINERS
• ASTM F 1957 : STANDARD TEST METHOD FOR COMPOSITE FOAM HARDNESS-DUROMETER HARDNESS
• ASTM F 1958/F 1958M : STANDARD TEST METHOD FOR DETERMINING THE IGNITABILITY OF NON-FLAME-RESISTANT MATERIALS FOR CLOTHING BY ELECTRIC ARC EXPOSURE METHOD USING MANNEQUINS
• ASTM F 1959/F 1959M : STANDARD TEST METHOD FOR DETERMINING THE ARC RATING OF MATERIALS FOR CLOTHING
• ASTM F 1960 : STANDARD SPECIFICATION FOR COLD EXPANSION FITTINGS WITH PEX REINFORCING RINGS FOR USE WITH CROSS-LINKED POLYETHYLENE (PEX) TUBING
• ASTM F 1961 : STANDARD SPECIFICATION FOR METAL MECHANICAL COLD FLARE COMPRESSIONFITTINGS WITH DISC SPRING FOR CROSSLINKED POLYETHYLENE (PEX) TUBING
• ASTM F 1962 : STANDARD GUIDE FOR USE OF MAXI-HORIZONTAL DIRECTIONAL DRILLING FORPLACEMENT OF POLYETHYLENE PIPE OR CONDUIT UNDER OBSTACLES, INCLUDING RIVER CROSSINGS
• ASTM F 1963 : STANDARD SPECIFICATION FOR DEEP-FAT FRYERS, GAS OR ELECTRIC, OPEN
• ASTM F 1964 : STANDARD TEST METHOD FOR PERFORMANCE OF PRESSURE AND KETTLE FRYERS
• ASTM F 1965 : STANDARD TEST METHOD FOR PERFORMANCE OF DECK OVENS
• ASTM F 1966 : STANDARD SPECIFICATION FOR DOUGH DIVIDER AND ROUNDING MACHINES
• ASTM F 1967 : STANDARD CONSUMER SAFETY SPECIFICATION FOR INFANT BATH SEATS
• ASTM F 1970 : STANDARD SPECIFICATION FOR SPECIAL ENGINEERED FITTINGS, APPURTENANCES OR VALVES FOR USE IN POLY (VINYL CHLORIDE) (PVC) OR CHLORINATED POLY(VINYL CHLORIDE) (CPVC) SYSTEMS
• ASTM F 1971 : STANDARD TEST METHOD FOR ELECTRICAL RESISTANCE OF TIRES UNDER LOADON THE TEST BENCH
• ASTM F 1972 : STANDARD GUIDE FOR TERMINOLOGY RELATING TO CANDLES AND ASSOCIATED ACCESSORY ITEMS
• ASTM F 1973 : STANDARD SPECIFICATION FOR FACTORY ASSEMBLED ANODELESS RISERS AND TRANSITION FITTINGS IN POLYETHYLENE (PE) AND POLYAMIDE 11 (PA11) FUEL GAS DISTRIBUTION SYSTEMS
• ASTM F 1974 : STANDARD SPECIFICATION FOR METAL INSERT FITTINGS FOR POLYETHYLENE/ALUMINUM/POLYETHYLENE AND CROSSLINKED POLYETHYLENE/ALUMINUM/ CROSSLINKED POLYETHYLENE COMPOSITE PRESSURE PIPE
• ASTM F 1975 : STANDARD SPECIFICATION FOR NONPOWERED BICYCLE TRAILERS DESIGNED FOR HUMAN PASSENGERS
• ASTM F 1976 : STANDARD TEST METHOD FOR IMPACT ATTENUATION PROPERTIES OF ATHLETICSHOES USING AN IMPACT TEST
• ASTM F 1977 : STANDARD TEST METHOD FOR DETERMINING INITIAL, FRACTIONAL, FILTRATION EFFICIENCY OF A VACUUM CLEANER SYSTEM
• ASTM F 1978 : STANDARD TEST METHOD FOR MEASURING ABRASION RESISTANCE OF METALLICTHERMAL SPRAY COATINGS BY USING THE TABER ABRASER
• ASTM F 1979 : STANDARD SPECIFICATION FOR PAINTBALLS USED IN THE SPORT OF PAINTBALL
• ASTM F 1980 : STANDARD GUIDE FOR ACCELARATED AGING OF STERILE BARRIER SYSTEMS FOR MEDICAL DEVICES
• ASTM F 1981 : STANDARD SPECIFICATION FOR SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
• ASTM F 1982 : STANDARD TEST METHOD FOR ANALYZING ORGANIC CONTAMINANTS ON SILICON WAFER SURFACES BY THERMAL DESORPTION GAS CHROMATOGRAPHY
• ASTM F 1983 : STANDARD PRACTICE FOR ASSESSMENT OF COMPATIBILITY OF ABSORBABLE/RESORBABLE BIOMATERIALS FOR IMPLANT APPLICATIONS
• ASTM F 1984 : STANDARD PRACTICE FOR TESTING FOR WHOLE COMPLEMENT ACTIVATION IN SERUM BY SOLID MATERIALS
• ASTM F 1985 : STANDARD SPECIFICATION FOR PNEUMATIC-OPERATED, GLOBE-STYLE, CONTROL VALVES
• ASTM F 1986 : STANDARD SPECIFICATION FOR MULTILAYER PIPE TYPE 2, COMPRESSION FITTINGS, AND COMPRESSION JOINTS FOR HOT AND COLD DRINKING-WATER SYSTEMS
• ASTM F 1987 : STANDARD SPECIFICATION FOR MULTILAYER PIPE TYPE 2, COMPRESSION FITTINGS, AND COMPRESSION JOINTS FOR HYDRONIC HEATING SYSTEMS
• ASTM F 1988 : STANDARD PERFORMANCE REQUIREMENTS FOR PLASTIC CHAISE LOUNGES, WITHOR WITHOUT MOVING ARMS, WITH ADJUSTABLE BACKS, FOR OUTDOOR USE
• ASTM F 1989 : STANDARD SPECIFICATION FOR COOKING FIRE SUPPRESSION BLANKETS
• ASTM F 1990 : STANDARD GUIDE FOR IN-SITU BURNING OF SPILLED OIL: IGNITION DEVICES
• ASTM F 1991 : STANDARD TEST METHOD FOR PERFORMANCE OF CHINESE (WOK) RANGES
• ASTM F 1992 : STANDARD PRACTICE FOR REPROCESSING OF REUSABLE, HEAT-STABLE ENDOSCOPIC ACCESSORY INSTRUMENTS (EAI) USED WITH FLEXIBLE ENDOSCOPES
• ASTM F 1993 : STANDARD CLASSIFICATION OF HUMAN SEARCH AND RESCUE RESOURCES
• ASTM F 1994 : STANDARD TEST METHOD FOR SHIPBOARD FIXED FOAM FIREFIGHTING SYSTEMS
• ASTM F 1995 : STANDARD TEST METHOD FOR DETERMINING THE BOND STRENGTH OF A SURFACE MOUNT DEVICE (SMD) ON A MEMBRANE SWITCH BY APPLYING SHEAR FORCE
• ASTM F 1996 : STANDARD TEST METHOD FOR SILVER MIGRATION FOR MEMBRANE SWITCH CIRCUITRY
• ASTM F 1997 : STANDARD TEST METHOD FOR DETERMINING THE SENSITIVITY (TEASING) OF A TACTILE MEMBRANE SWITCH
• ASTM F 1999 : STANDARD PRACTICE FOR INSTALLATION OF RIGID POLY (VINYL CHLORIDE) (PVC) FENCE SYSTEMS
• ASTM F 2 : ALUMINUM-CLAD STEEL STRIP & NICKEL-STEEL ALUMINUM-
• ASTM F 20 : HIGH – CONDUCTIVITY COMPOSITE ALUMINUM-STEEL-COPPE
• ASTM F 2000 : STANDARD GUIDE FOR FENCES FOR BALLFIELDS AND OTHER SPORTS FACILITIES
• ASTM F 376/F 376M : TEST METHODS FOR TIRES FOR WET TRACTION PERFORMANCE IN CORNERING
• ASTM F 377 : CALIBRATION OF BRAKING/TRACTIVE MEASURING DEVICES FOR TESTING TIRES
• ASTM F 379 : MEASURING SLOPE EFFICIENCY AND LASING THRESHOLD OF RUBY LASER RODS
• ASTM F 38 : STANDARD TEST METHODS FOR CREEP RELAXATION OF A GASKET MATERIAL
• ASTM F 380 : EFFECTIVE FLUORESCENT LIFETIME OF NEODYMIUM-DOPED
• ASTM F 381 : STANDARD SAFETY SPECIFICATION FOR COMPONENTS, ASSEMBLY, USE, AND LABELING OF CONSUMER TRAMPOLINES
• ASTM F 382 : STANDARD SPECIFICATION AND TEST METHOD FOR METALLIC BONE PLATES
• ASTM F 383 : STATIC BEND AND TORSION TESTING OF INTRAMEDULLARY
• ASTM F 384 : STANDARD SPECIFICATIONS AND TEST METHODS FOR METALLIC ANGLED ORTHOPEDIC FRACTURE FIXATION DEVICES
• ASTM F 386 : STANDARD TEST METHOD FOR THICKNESS OF RESILIENT FLOORING MATERIALSHAVING FLAT SURFACES
• ASTM F 387 : STANDARD TEST METHOD FOR MEASURING THICKNESS OF RESILIENT FLOOR COVERING WITH FOAM LAYER
• ASTM F 388 : MEASUREMENT OF OXIDE THICKNESS ON SILICON WAFERS &
• ASTM F 389 : CRYSTALLOGRAPHIC PERFECTION OF GERMANIUM BY PREFERENTIAL ETCH TECHNIQUES
• ASTM F 39 : TESTING COMPRESSED ASBESTOS SHEET PACKING
• ASTM F 390 : STANDARD TEST METHOD FOR SHEET RESISTANCE OF THIN METALLIC FILMS WITH A COLLINEAR FOUR-PROBE ARRAY
• ASTM F 391 : STANDARD TEST METHODS FOR MINORITY CARRIER DIFFUSION LENGTH IN EXTRINSIC SEMICONDUCTORS BY MEASUREMENT OF STEADY-STATE SURFACE PHOTOVOLTAGE
• ASTM F 392 : STANDARD TEST METHOD FOR FLEX DURABILITY OF FLEXIBLE BARRIER MATERIALS
• ASTM F 393 : INSPECTION OF PNEUMATIC TIRES PRIOR TO RETREADING
• ASTM F 394 : STANDARD TEST METHOD FOR BIAXIAL FLEXURE STRENGTH (MODULUS OF RUPTURE) OF CERAMIC SUBSTRATES
• ASTM F 395 : STANDARD TERMINOLOGY RELATING TO VACUUM CLEANERS
• ASTM F 396 : STANDARD PRACTICE FOR COMPARING ONE-TIME NONCORRECTABLE TYPEWRITER RIBBONS
• ASTM F 397 : STANDARD TEST METHOD FOR RESISTIVITY OF SILICON BARS USING A TWO- POINT PROBE
• ASTM F 398 : STANDARD TEST METHOD FOR MAJORITY CARRIER CONCENTRATION IN SEMICONDUCTORS BY MEASUREMENT OF WAVENUMBER OR WAVELENGTH OF THE PLASMA RESONANCE MINIMUM

ASTM A , ASTM B ,  ASTM C ,  ASTM D , ASTM E , ASTM F | 1 || 2 | , ASTM G