STD-ASTM E XXXX

ASTM A , ASTM B , ASTM C , ASTM D , ASTM E | 1 || 2 || 3 | , ASTM F , ASTM G

• ASTM E1 : EN-Standard Specification for ASTM Thermometers-E1
• ASTM E1 REV A : EN-STANDARD SPECIFICATION FOR ASTM THERMOMETERS (METHOD 9501 – FEDERAL TEST METHOD STANDARD NO. 791B)-DOCUMENT NOT AVAILABLE
• ASTM E10 : EN-Standard Test Method for Brinell Hardness of Metallic Materials-AASHTO T70-86
• ASTM E10 REV A : EN-Standard Test Method for Brinell Hardness of Metallic Materials
• ASTM E100 : EN-STANDARD SPECIFICATION FOR ASTM HYDROMETERS
• ASTM E1000 : EN-Standard Guide for Radioscopy
• ASTM E1001 : EN-Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
• ASTM E1001 REV A : EN-Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
• ASTM E1002 : EN-STANDARD TEST METHOD FOR TESTING FOR LEAKS USING ULTRASONICS
• ASTM E1003 : EN-Standard Test Method for Hydrostatic Leak Testing
• ASTM E1004 : EN-Standard Test Method for Electromagnetic (Eddy-Current) Measurements of Electrical Conductivity
• ASTM E1005 : EN-Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance E 706(IIIA)
• ASTM E1006 : EN-STANDARD PRACTICE FOR ANALYSIS AND INTERPRETATION OF PHYSICS DOSIMETRY RESULTS FOR TEST REACTORS E 706(II)
• ASTM E1007 : EN-Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
• ASTM E1008 : EN-Standard Practice for Installation Inspection and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
• ASTM E1009 : EN-STANDARD PRACTICE FOR EVALUATING AN OPTICAL EMISSION VACUUM SPECTROMETER TO ANALYZE CARBON AND LOW-ALLOY STEEL
• ASTM E101 : EN-Standard Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique
• ASTM E1010 : EN-Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
• ASTM E1011 : EN-STANDARD SPECIFICATION FOR SULFURIC ACID
• ASTM E1012 : EN-Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
• ASTM E1012 REV A : EN-Standard Practice for Verification of Specimen Alignment Under Tensile Loading
• ASTM E1013 : EN-Standard Terminology Relating to Computerized Systems
• ASTM E1013 REV A : EN-STANDARD TERMINOLOGY RELATING TO COMPUTERIZED SYSTEMS
• ASTM E1014 : EN-Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
• ASTM E1015 : EN-STANDARD PRACTICE FOR REPORTING SPECTRA IN X-RAY PHOTOELECTRON SPECTROSCOPY
• ASTM E1016 : EN-Standard Practice for Describing and Specifying the Properties of Electrostatic Electron Spectrometers
• ASTM E1017 : EN-Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies
• ASTM E1018 : EN-STANDARD GUIDE FOR APPLICATION OF ASTM EVALUATED NUCLEAR DATA FILE (ENDF/A) – CROSS SECTION AND UNCERTAINTY FILE E 706(IIB) (R 1991)
• ASTM E1019 : EN-STANDARD TEST METHODS FOR DETERMINATION OF CARBON SULFUR NITROGEN OXYGEN AND HYDROGEN IN STEEL AND IN IRON NICKEL AND COBALT ALLOYS
• ASTM E1019 REV A : EN-STANDARD TEST METHODS FOR DETERMINATION OF CARBON SULFUR NITROGEN AND OXYGEN IN STEEL AND IN IRON NICKEL AND COBALT ALLOYS
• ASTM E102 : EN-Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
• ASTM E102/E102M : EN-Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
• ASTM E1020 : EN-Standard Practice for Reporting Incidents
• ASTM E1021 : EN-STANDARD TEST METHODS FOR MEASURING THE SPECTRAL RESPONSE OF PHOTOVOLTAIC CELLS (R 1993) (E1-1993)
• ASTM E1022 : EN-STANDARD PRACTICE FOR CONDUCTING BIOCONCENTRATION TESTS WITH FISHES AND SALTWATER BIVALVE MOLLUSCS (R 1988)
• ASTM E1023 : EN-Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
• ASTM E1024 : EN-Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
• ASTM E1025 : EN-STANDARD PRACTICE FOR HOLE-TYPE IMAGE QUALITY INDICATORS USED FOR RADIOGRAPHY (R 1989)
• ASTM E1026 : EN-Standard Practice for Using the Fricke Reference-Standard Dosimetry System
• ASTM E1027 : EN-STANDARD PRACTICE FOR EXPOSURE OF POLYMERIC MATERIALS TO IONIZING RADIATION
• ASTM E1028 : EN-STANDARD TEST METHOD FOR TOTAL IRON IN IRON ORES BY THE POLLUTION-FREE TITRIMETRIC METHOD (R 1988)
• ASTM E1029 : EN-Standard Guide for Documentation of Clinical Laboratory Computer Systems
• ASTM E103 : EN-Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
• ASTM E1030 : EN-Standard Test Method for Radiographic Examination of Metallic Castings
• ASTM E1031 : EN-STANDARD TEST METHOD FOR X-RAY EMISSION SPECTROMETRIC ANALYSIS OF SLAGS
• ASTM E1032 : EN-Standard Test Method for Radiographic Examination of Weldments
• ASTM E1033 : EN-Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
• ASTM E1034 : EN-STANDARD SPECIFICATION FOR NUCLEAR FACILITY TRANSIENT WORKER RECORDS
• ASTM E1035 : EN-Standard Practice for Determining Radiation Exposures for Nuclear Reactor Vessel Support Structures
• ASTM E1036 : EN-Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
• ASTM E1036/E1036M : EN-Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (E1-1996)
• ASTM E1036M : EN-Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (미터)
• ASTM E1037 : EN-Standard Test Method for Measuring Particle Size Distribution of RDF-5
• ASTM E1038 : EN-Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
• ASTM E1039 : EN-Standard Test Method for Calibration of Silicon Non-Concentrator Photovoltaic Primary Reference Cells Under Global Irradiation
• ASTM E104 : EN-Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions
• ASTM E1040 : EN-Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
• ASTM E1041 : EN-Standard Guide for Measurement of Masking Sound in Open Offices
• ASTM E1042 : EN-Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
• ASTM E1043 : EN-Standard Specification for Pipets Milk and Cream Examination
• ASTM E1044 : EN-Standard Specification for Glass Serological Pipets (General Purpose and Kahn)
• ASTM E1045 : EN-Standard Specification for Pipet Sahli Hemoglobin
• ASTM E1046 : EN-Standard Specification for Glass Westergren Tube Disposable
• ASTM E1047 : EN-Standard Specification for Blood Sedimentation Tube Wintrobe Glass Disposable
• ASTM E1048 : EN-Standard Specification for Color-Coding Pipets or Containers Coated with Anticoagulants
• ASTM E1049 : EN-Standard Practices for Cycle Counting in Fatigue Analysis
• ASTM E105 : EN-Standard Practice for Probability Sampling of Materials
• ASTM E1050 : EN-Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube Two Microphones and A Digital Frequency Analysis System
• ASTM E1050 REV A : EN-STANDARD TEST METHOD FOR IMPEDANCE AND ABSORPTION OF ACOUSTICAL MATERIALS USING A TUBE TWO MICROPHONES AND A DIGITAL FREQUENCY ANALYSIS SYSTEM
• ASTM E1051 : EN-STANDARD GUIDELINES FOR EVALUATING THE USEFULNESS OF HERBICIDES ON POTATO (R 1991) (E1-1991)
• ASTM E1052 : EN-Standard Test Method for Efficacy of Virucidal Agents Intended for Special Applications
• ASTM E1053 : EN-Standard Test Method for Efficacy of Virucidal Agents Intended for Inanimate Environmental Surfaces
• ASTM E1054 : EN-Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents
• ASTM E1055 : EN-Standard Test Method for Evaluation of Eye Irritation in Albino Rabbits
• ASTM E1056 : EN-Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings
• ASTM E1057 : EN-Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
• ASTM E1058 : EN-Standard Test Methods for the Toxic Contamination of the Environment in the Operator Enclosure of Self-Propelled Agriculture Vehicles
• ASTM E1059 : EN-Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes
• ASTM E106 : EN-Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys
• ASTM E1060 : EN-Standard Practice for Interlaboratory Testing of Spectrochemical Methods of Analysis
• ASTM E1061 : EN-Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
• ASTM E1062 : EN-Standard Practice for Conducting Reproductive Studies with Avian Species
• ASTM E1063 : EN-Standard Test Method for X-Ray Emission Spectrometric Determination of Cerium and Lanthanum in Carbon and Low-Alloy Steels
• ASTM E1064 : EN-Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
• ASTM E1064 REV A : EN-Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
• ASTM E1065 : EN-Standard Guide for Evaluating Characteristics of Ultrasonic Search Units
• ASTM E1065 REV A : EN-STANDARD GUIDE FOR EVALUATING CHARACTERISTICS OF ULTRASONIC SEARCH UNITS
• ASTM E1066 : EN-Standard Test Method for Ammonia Colorimetric Leak Testing
• ASTM E1067 : EN-Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
• ASTM E1068 : EN-Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
• ASTM E1069 : EN-Standard Test Method for Testing Polymeric Seal Materials for Geothermal or High Temperature Service or both Under Sealing Stress
• ASTM E107 : EN-Standard Test Methods for Chemical Analysis of Electronic Nickel
• ASTM E1070 : EN-Standard Test Method for Phosphorus in Iron Ores by the Phospho- Molybdenum-Blue Photometric Methods
• ASTM E1071 : EN-Standard Test Method for Determination of Reducibility of Iron Ores
• ASTM E1072 : EN-Standard Test Method for Low Temperature Breakdown of Iron Ores
• ASTM E1073 : EN-Standard Test Method for Obtaining a Pharmacological Profile with Mice
• ASTM E1074 : EN-Standard Practice for Measuring Net Benefits for Investments in Buildings and Building Systems
• ASTM E1075 : EN-Standard Test Methods for Odor of Ethylene Glycol Diethylene Glycol Triethylene Glycol Propylene Glycol and Dipropylene Glycol and Taste of Propylene Glycol
• ASTM E1076 : EN-Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities
• ASTM E1077 : EN-STANDARD TEST METHODS FOR ESTIMATING THE DEPTH OF DECARBURIZATION OF STEEL SPECIMENS
• ASTM E1078 : EN-Standard Guide for Specimen Preparation and Mounting in Surface Analysis
• ASTM E1078 REV A : EN-Standard Guide for Procedures for Specimen Preparation Mounting and Analysis in Auger Electron Spectroscopy X-Ray Photoelectron Spectroscopy and Secondary Ion Mass Spectrometry
• ASTM E1079 : EN-Standard Practice for Calibration of Transmission Densitometers
• ASTM E108 : EN-Standard Test Methods for Fire Tests of Roof Coverings
• ASTM E108 REV A : EN-Standard Test Methods for Fire Tests of Roof Coverings
• ASTM E1081 : EN-STANDARD TEST METHOD FOR TOTAL IRON IN IRON ORES BY THE SILVER REDUCTION TITRIMETRIC METHOD
• ASTM E1081 REV A : EN-Standard Test Method for Determination of Total Iron in Iron Ores and Related Materials by Silver Reduction- Dichromate Titration
• ASTM E1082 : EN-Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
• ASTM E1083 : EN-Standard Test Method for Sensory Evalution of Red Pepper Heat
• ASTM E1084 : EN-Standard Test Method for Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
• ASTM E1085 : EN-STANDARD TEST METHOD FOR X-RAY EMISSION SPECTROMETRIC ANALYSIS OF METALS
• ASTM E1086 : EN-Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
• ASTM E1087 : EN-Standard Practice for Sampling Molten Steel from a Ladle Using an Immersion Sampler to Produce a Sample for Emission Spectrochemical Analysis
• ASTM E1088 : EN-Standard Definitions of Terms Relating to Atomizing Devices-Discontinued February 1998
• ASTM E1089 : EN-Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
• ASTM E1090 : EN-Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins
• ASTM E1091 : EN-STANDARD SPECIFICATION FOR NONMETALLIC HONEYCOMB CORE FOR USE IN SHELTER PANELS
• ASTM E1092 : EN-STANDARD SPECIFICATION FOR GLASS MICRO FOLIN PIPET DISPOSABLE
• ASTM E1093 : EN-Standard Specification for Glass Prothrombin Pipet Disposable
• ASTM E1094 : EN-STANDARD SPECIFICATION FOR PHARMACEUTICAL GLASS GRADUATES
• ASTM E1095 : EN-Standard Specification for Common Laboratory Glass Funnels
• ASTM E1096 : EN-Standard Specification for Laboratory Glass Separatory Funnels
• ASTM E1097 : EN-Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis
• ASTM E1098 : EN-Standard Specification for Liquid Caustic Soda (Sodium Hydroxide Solution)
• ASTM E1099 : EN-Standard Specification for Soda Ash Anhydrous (Sodium Carbonate Anhydrous)
• ASTM E1099 REV A : EN-STANDARD SPECIFICATION FOR SODA ASH ANHYDROUS (SODIUM CARBONATE ANHYDROUS)
• ASTM E11 : EN-Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
• ASTM E110 : EN-Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
• ASTM E1100 : EN-STANDARD TEST METHOD FOR GAS CHROMATOGRAPHIC ANALYSIS OF SPECIALLY DENATURED ETHANOL FORMULA SD-3A
• ASTM E1102 : EN-Standard Terminology Relating to Agricultural Chemical Application
• ASTM E1103 : EN-Standard Test Method for Determining Subchronic Dermal Toxicity
• ASTM E1104 : EN-Standard Specification for Clinical Thermometers Probe Covers and Sheaths
• ASTM E1105 : EN-Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows Skylights Doors and Curtain Walls by Uniform or Cyclic Static Air Pressure Difference
• ASTM E1106 : EN-Standard Test Method for Primary Calibration of Acoustic Emission Sensors
• ASTM E1107 : EN-Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
• ASTM E1108 : EN-Standard Test Method for Determination of the Recovery of a Product in a Materials Seperation Device
• ASTM E1109 : EN-Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
• ASTM E111 : EN-Standard Test Method for Young’s Modulus Tangent Modulus and Chord Modulus
• ASTM E1110 : EN-Standard Classification for Determination of Articulation Class
• ASTM E1111 : EN-Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
• ASTM E1112 : EN-Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
• ASTM E1113 : EN-STANDARD GUIDE FOR PROJECT DEFINITION FOR COMPUTERIZED SYSTEMS
• ASTM E1114 : EN-Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
• ASTM E1115 : EN-Standard Test Method for Evaluation of Surgical Hand Scrub Formulations-Reinstated
• ASTM E1116 : EN-Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates
• ASTM E1117 : EN-Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities
• ASTM E1118 : EN-Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
• ASTM E1119 : EN-Standard Specification for Industrial Grade Ethylene Glycol
• ASTM E112 : EN-Standard Test Methods for Determining Average Grain Size
• ASTM E1120 : EN-Standard Specification for Liquid Chlorine
• ASTM E1121 : EN-Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
• ASTM E1122 : EN-Standard Practice for Obtaining JK Inclusion Ratings Using Automatic Image Analysis
• ASTM E1123 : EN-Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
• ASTM E1124 : EN-Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
• ASTM E1125 : EN-Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
• ASTM E1126 : EN-STANDARD TERMINOLOGY RELATING TO BIOMASS FUELS
• ASTM E1126 REV A : EN-Standard Terminology Relating to Biomass Fuels
• ASTM E1127 : EN-Standard Guide for Depth Profiling in Auger Electron Spectroscopy
• ASTM E1128 : EN-STANDARD PRACTICE FOR ESTABLISHING PARAMETERS FOR TESTING DYNAMIC SEALS FOR GEOTHERMAL USE
• ASTM E1129 : EN-STANDARD SPECIFICATION FOR THERMOCOUPLE CONNECTORS (E1-1990)
• ASTM E1129/E1129M : EN-Standard Specification for Thermocouple Connectors
• ASTM E1130 : EN-Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
• ASTM E1131 : EN-Standard Test Method for Compositional Analysis by Thermogravimetry
• ASTM E1132 : EN-Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
• ASTM E1132 REV A : EN-Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
• ASTM E1133 : EN-Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
• ASTM E1134 : EN-Standard Specification for Source-Separated Steel Cans
• ASTM E1135 : EN-Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
• ASTM E1136 : EN-Standard Specification for P195/75R14 Radial Standard Reference Test Tire
• ASTM E1137 : EN-STANDARD SPECIFICATION FOR INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS
• ASTM E1137/E1137M : EN-Standard Specification for Industrial Platinum Resistance Thermometers
• ASTM E1138 : EN-STANDARD TERMINOLOGY OF TECHNICAL ASPECTS OF PRODUCTS LIABILITY LITIGATION
• ASTM E1138 REV A : EN-STANDARD TERMINOLOGY OF TECHNICAL ASPECTS OF PRODUCTS LIABILITY LITIGATION
• ASTM E1139 : EN-STANDARD PRACTICE FOR CONTINUOUS MONITORING OF ACOUSTIC EMISSION FROM METAL PRESSURE BOUNDARIES
• ASTM E114 : EN-Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method
• ASTM E1140 : EN-Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use in Gas Chromatography
• ASTM E1142 : EN-Standard Terminology Relating to Thermophysical Properties
• ASTM E1142 REV A : EN-STANDARD TERMINOLOGY RELATING TO THERMOPHYSICAL PROPERTIES
• ASTM E1142 REV B : EN-Standard Terminology Relating to Thermophysical Properties
• ASTM E1143 : EN-Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect to a Test Parameter
• ASTM E1144 : EN-STANDARD TEST METHOD FOR CALIBRATION OF NON-CONCENTRATOR TERRESTRIAL PHOTOVOLTAIC PRIMARY REFERENCE CELLS UNDER DIRECT IRRADIANCE
• ASTM E1145 : EN-STANDARD SPECIFICATION FOR DENATURED ETHYL ALCOHOL FORMULA 3A
• ASTM E1146 : EN-Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
• ASTM E1147 : EN-Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography
• ASTM E1148 : EN-Standard Test Method for Measurements of Aqueous Solubility
• ASTM E1149 : EN-STANDARD TERMINOLOGY RELATING TO NDT BY INFRARED THERMOGRAPHY
• ASTM E1149 REV A : EN-STANDARD TERMINOLOGY RELATING TO NDT BY INFRARED THERMOGRAPHY
• ASTM E1149 REV B : EN-STANDARD DEFINITIONS OF TERMS RELATING TO NDT BY INFRARED THERMOGRAPHY
• ASTM E115 : EN-STANDARD PRACTICES FOR PHOTOGRAPHIC PROCESSING IN SPECTROCHEMICAL ANALYSIS (R 1979) (E1-1984)
• ASTM E1150 : EN-Standard Definitions of Terms Relating to Fatigue
• ASTM E1151 : EN-STANDARD PRACTICE FOR ION CHROMATOGRAPHY TERMS AND RELATIONSHIPS
• ASTM E1152 : EN-Standard Test Method for Determining J-R Curves
• ASTM E1153 : EN-Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces
• ASTM E1154 : EN-Standard Specification for Piston or Plunger Operated Volumetric Apparatus
• ASTM E1155 : EN-Standard Test Method for Determining Floor Flatness and Levelness Using the F-Number System
• ASTM E1155M : EN-STANDARD TEST METHOD FOR DETERMINING FLOOR FLATNESS AND LEVELNESS USING THE F-NUMBER SYSTEM (METRIC) (E1-1991)
• ASTM E1156 : EN-Standard Practice for Health Requirements for Occupational Exposure to Synthetic Amorphous Silica
• ASTM E1157 : EN-Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
• ASTM E1158 : EN-Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
• ASTM E1159 : EN-Standard Specification for Thermocouple Materials Platinum-Rhodium Alloys and Platinum
• ASTM E116 : EN-Standard Practice for Photographic Photometry in Spectrochemical Analysis
• ASTM E1160 : EN-Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems
• ASTM E1161 : EN-STANDARD TEST METHOD FOR RADIOLOGIC TESTING OF SEMICONDUCTORS AND ELECTRONIC COMPONENTS
• ASTM E1162 : EN-Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)
• ASTM E1163 : EN-Standard Test Method for Estimating Acute Oral Toxicity in Rats
• ASTM E1164 : EN-Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
• ASTM E1164 REV A : EN-Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
• ASTM E1165 : EN-Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
• ASTM E1166 : EN-Standard Guide for Network Level Pavement Management
• ASTM E1167 : EN-Standard Guide for Radiation Protection Program for Decommissioning Operations
• ASTM E1168 : EN-Standard Guide for Radiological Protection Training for Nuclear Facility Workers
• ASTM E1169 : EN-Standard Practice for Conducting Ruggedness Tests
• ASTM E117 : EN-Standard Method for Spectrographic Analysis of Pig Lead by the Point-To-Plane Technique
• ASTM E1170 : EN-Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
• ASTM E1171 : EN-Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
• ASTM E1172 : EN-Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer
• ASTM E1173 : EN-Standard Test Method for Evaluation of Preoperative Precatheterization or Preinjection Skin Preparations
• ASTM E1174 : EN-Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel or Consumer Handwash Formulations
• ASTM E1175 : EN-Standard Test Method for Determining Solar or Photopic Reflectance Transmittance and Absorptance of Materials Using a Large Diameter Integrating Sphere
• ASTM E1176 : EN-STANDARD SPECIFICATION FOR POLYESTER GRADE ETHYLENE GLYCOL
• ASTM E1177 : EN-Standard Specification for Engine Coolant Grade Glycol
• ASTM E1177 REV A : EN-Standard Specification for Engine Coolant Grade Ethylene Glycol
• ASTM E1178 : EN-Standard Test Methods for Analysis of Acrylonitrile
• ASTM E1179 : EN-Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
• ASTM E118 : EN-Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
• ASTM E1180 : EN-Standard Practice for Preparing Sulfur Prints for Macrostructural Examination
• ASTM E1181 : EN-Standard Test Methods for Characterizing Duplex Grain Sizes
• ASTM E1182 : EN-STANDARD TEST METHOD FOR MEASUREMENT OF SURFACE LAYER THICKNESS BY RADIAL SECTIONING
• ASTM E1183 : EN-Standard Test Method for Air Drying RDF-5 for Further Analysis
• ASTM E1184 : EN-Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
• ASTM E1185 : EN-Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
• ASTM E1186 : EN-Standard Practices for Air Leakage Site Detection in Building Envelopes
• ASTM E1187 : EN-STANDARD TERMINOLOGY RELATING TO LABORATORY ACCREDITATION
• ASTM E1187 REV A : EN-Standard Terminology Relating to Laboratory Accreditation
• ASTM E1188 : EN-Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
• ASTM E1189 : EN-Standard Specification for Micro-Burets (Koch Style)
• ASTM E119 : EN-Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E119 REV A : EN-Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E119 REV B : EN-Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E119 REV C : EN-Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E1190 : EN-Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
• ASTM E1191 : EN-Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
• ASTM E1191 REV A : EN-Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
• ASTM E1192 : EN-Standard Guide for Conducting Acute Toxicity Tests on Aqueous Effluents with Fishes Macroinvertebrates and Amphibians
• ASTM E1193 : EN-STANDARD GUIDE FOR CONDUCTING RENEWAL LIFE-CYCLE TOXICITY TESTS WITH DAPHNIA MAGNA
• ASTM E1194 : EN-Standard Test Method for Vapor Pressure
• ASTM E1195 : EN-Standard Test Method for Determining a Sorption Constant (Koc) for an Organic Chemical in Soil and Sediments
• ASTM E1196 : EN-STANDARD TEST METHOD FOR DETERMINING THE ANAEROBIC BIODEGRADATION POTENTIAL OF ORGANIC CHEMICALS
• ASTM E1197 : EN-Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
• ASTM E1198 : EN-Standard Practice for Sampling Zooplankton with Pumps
• ASTM E1199 : EN-Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
• ASTM E12 : EN-Standard Terminology Relating to Density and Specific Gravity of Solids Liquids and Gases
• ASTM E120 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS
• ASTM E1200 : EN-Standard Practice for Preserving Zooplankton Samples
• ASTM E1201 : EN-Standard Practice for Sampling Zooplankton with Conical Tow Nets
• ASTM E1202 : EN-Standard Guide for Development of Micronucleus Assay Standards
• ASTM E1203 : EN-Standard Practice for Using Brine Shrimp Nauplii as Food for Test Animals in Aquatic Toxicology
• ASTM E1204 : EN-Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing
• ASTM E1205 : EN-STANDARD TEST METHOD FOR USING THE CERIC-CEROUS SULFATE DOSIMETER TO MEASURE ABSORBED DOSE IN WATER
• ASTM E1206 : EN-Standard Guide for Computerization of Existing Equipment
• ASTM E1207 : EN-Standard Practice for the Sensory Evaluation of Axillary Deodorancy
• ASTM E1208 : EN-Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Lipophilic Post-Emulsification Process
• ASTM E1209 : EN-STANDARD TEST METHOD FOR FLUORESCENT PENETRANT EXAMINATION USING THE WATER-WASHABLE PROCESS
• ASTM E121 : EN-Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys
• ASTM E1210 : EN-STANDARD TEST METHOD FOR FLUORESCENT PENETRANT EXAMINATION USING THE HYDROPHILIC POST-EMULSIFICATION PROCESS
• ASTM E1211 : EN-Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
• ASTM E1212 : EN-Standard Practice for Quality Management Systems for Nondestructive Testing Agencies
• ASTM E1213 : EN-Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
• ASTM E1214 : EN-Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance E 706 (IIIE)
• ASTM E1215 : EN-Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
• ASTM E1216 : EN-Standard Practice for Sampling for Surface Particulate Contamination by Tape Lift
• ASTM E1217 : EN-Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in X-Ray Photoelectron Spectroscopy and Auger Electron Spectroscopy
• ASTM E1218 : EN-Standard Guide for Conducting Static Toxicity Tests with Microalgae
• ASTM E1218 REV A : EN-Standard Guide for Conducting Static 96-h Toxicity Tests with Microalgae
• ASTM E1219 : EN-STANDARD TEST METHOD FOR FLUORESCENT PENETRANT EXAMINATION USING THE SOLVENT-REMOVABLE PROCESS
• ASTM E122 : EN-STANDARD RECOMMENDED PRACTICE FOR CHOICE OF SAMPLE SIZE TO ESTIMATE THE AVERAGE QUALITY OF A LOT OR PROCESS (R 1979) (E-1979)
• ASTM E1220 : EN-STANDARD TEST METHOD FOR VISIBLE PENETRANT EXAMINATION USING THE SOLVENT-REMOVABLE PROCESS
• ASTM E1221 : EN-Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness Kla of Ferritic Steels
• ASTM E1222 : EN-STANDARD TEST METHOD FOR THE LABORATORY MEASUREMENT OF THE INSERTION LOSS OF PIPE LAGGING SYSTEMS
• ASTM E1223 : EN-Standard Specification for Type N Thermocouple Wire
• ASTM E1224 : EN-STANDARD GUIDE FOR CATEGORIZING FIELDS OF TESTING FOR LABORATORY ACCEDITATION PURPOSES
• ASTM E1225 : EN-Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
• ASTM E1226 : EN-Standard Test Method for Pressure and Rate of Pressure Rise for Combustible Dusts
• ASTM E1227 : EN-STANDARD TERMINOLOGY RELATING TO CHEMICAL ANALYSIS OF METALS
• ASTM E1227 REV A : EN-STANDARD TERMINOLOGY RELATING TO CHEMICAL ANALYSIS OF METALS
• ASTM E1227 REV B : EN-STANDARD TERMINOLOGY RELATING TO CHEMICAL ANALYSIS OF METALS
• ASTM E1228 : EN-Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure
• ASTM E1229 : EN-STANDARD SPECIFICATION FOR CALCIUM HYPOCHLORITE
• ASTM E123 : EN-Standard Specification for Apparatus for Determination of Water by Distillation
• ASTM E1230 : EN-Standard Test Method for the Approximate Determination of Low Molecular Weight Hydrocarbons in Anhydrous Hydrogen Fluoride
• ASTM E1231 : EN-Standard Practice for Calculation of Hazard Potential Figures-Of-Merit for Thermally Unstable Materials
• ASTM E1231 REV A : EN-Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
• ASTM E1232 : EN-Standard Test Method for Temperature Limit of Flammability of Chemicals
• ASTM E1233 : EN-Standard Test Method for Structural Performance of Exterior Windows Doors Skylights and Curtain Walls by Cyclic Air Pressure Differential
• ASTM E1234 : EN-Standard Practice for Handling Transporting and Installing Non-Volatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
• ASTM E1235 : EN-Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
• ASTM E1235M : EN-Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft [미터]
• ASTM E1236 : EN-Standard Practice for Qualifying Charpy Impact Machines as Reference Machines
• ASTM E1237 : EN-Standard Guide for Installing Bonded Resistance Strain Gages
• ASTM E1238 : EN-STANDARD SPECIFICATION FOR TRANSFERRING CLINICAL OBSERVATIONS BETWEEN INDEPENDENT COMPUTER SYSTEMS
• ASTM E1239 : EN-Standard Practice for Description of Reservation/Registration-Admission Discharge Transfer (R-ADT) Systems for Electronic Health Record (EHR) Systems
• ASTM E124 : EN-Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
• ASTM E1240 : EN-Standard Test Method for Performance Testing of Wind Energy Conversion Systems
• ASTM E1241 : EN-Standard Guide for Conducting Early Life-Stage Toxicity Tests with Fishes
• ASTM E1242 : EN-Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
• ASTM E1243 : EN-STANDARD TEST METHOD FOR COLUMBIUM AND TANTALUM IN ORES AND CONCENTRATES INVOLVING ION EXCHANGE
• ASTM E1244 : EN-STANDARD TEST METHOD FOR X-RAY FLUORESCENCE ANALYSIS OF TANTALITE AND COLUMBITE ORES AND SLAGS BY A LITHIUM TETRABORATE FUSION TECHNIQUE UTILIZING INTERNAL STANDARDS
• ASTM E1245 : EN-Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
• ASTM E1246 : EN-Standard Practice for Reporting Reliability of Clinical Laboratory Computer Systems
• ASTM E1247 : EN-Standard Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
• ASTM E1248 : EN-Standard Practice for Shredder Explosion Protection
• ASTM E1249 : EN-Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
• ASTM E125 : EN-Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
• ASTM E1250 : EN-Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
• ASTM E1251 : EN-Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere Point-To-Plane Unipolar Self-Initiating Capacitor Discharge
• ASTM E1252 : EN-Standard Practice for General Techniques for Qualitative Infrared Analysis
• ASTM E1253 : EN-Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
• ASTM E1254 : EN-STANDARD GUIDE FOR STORAGE OF RADIOGRAPHS AND UNEXPOSED INDUSTRIAL RADIOGRAPHIC FILMS
• ASTM E1255 : EN-STANDARD PRACTICE FOR RADIOSCOPY
• ASTM E1255 REV B : EN-STANDARD PRACTICE FOR RADIOSCOPY
• ASTM E1256 : EN-Standard Test Methods for Radiation Thermometers (Single Waveband Type)
• ASTM E1257 : EN-Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
• ASTM E1258 : EN-Standard Test Method for Airflow Calibration of Fan Pressurization Devices
• ASTM E1259 : EN-Standard Test Method for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 C
• ASTM E126 : EN-Standard Test Method for Inspection and Verification of Hydrometers
• ASTM E126 REV A : EN-Standard Test Method for Inspection Calibration and Verification of ASTM Hydrometers
• ASTM E1260 : EN-Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
• ASTM E1261 : EN-Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
• ASTM E1262 : EN-Standard Guide for Performance of the Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay
• ASTM E1263 : EN-Standard Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
• ASTM E1264 : EN-STANDARD CLASSIFICATION FOR ACOUSTICAL CEILING PRODUCTS
• ASTM E1265 : EN-Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers-(Withdrawn 2004; No Replacement)
• ASTM E1266 : EN-Standard Practice for Processing Mixtures of Lime Fly Ash and Heavy Metal Wastes in Structural Fills and Other Construction Applications
• ASTM E1267 : EN-Standard Guide for ASTM Standard Specification Quality Statements
• ASTM E1268 : EN-Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures
• ASTM E1269 : EN-Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry-Replaces D3947-92
• ASTM E127 : EN-Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
• ASTM E127 REV A : EN-STANDARD PRACTICE FOR FABRICATING AND CHECKING ALUMINUM ALLOY ULTRASONIC STANDARD REFERENCE BLOCKS
• ASTM E1270 : EN-Standard Test Method for Equal Arm Balances
• ASTM E1271 : EN-STANDARD PRACTICE FOR QUALIFYING CHARPY VERIFICATION SPECIMENS OF HEAT-TREATED STEEL
• ASTM E1272 : EN-Standard Specification for Laboratory Glass Graduated Cylinders
• ASTM E1273 : EN-Standard Specification for Color Coding of Reusable Laboratory Pipets
• ASTM E1274 : EN-Standard Test Method for Measuring Pavement Roughness Using a Profilograph-(Reinstated)
• ASTM E1275 : EN-Standard Practice for Use of a Radiochromic Film Dosimetry System
• ASTM E1276 : EN-Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
• ASTM E1277 : EN-STANDARD TEST METHOD FOR CHEMICAL ANALYSIS OF ZINC-5% ALUMINUM-MISCHMETAL ALLOYS BY THE ICP ARGON PLASMA SPECTROMETRIC METHOD
• ASTM E1278 : EN-Standard Guide for Radioactive Pathway Methodology for Release of Sites Following Decommissioning
• ASTM E1279 : EN-Standard Test Method for Biodegradation by a Shake-Flask Die-Away Method
• ASTM E128 : EN-Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
• ASTM E1280 : EN-Standard Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity
• ASTM E1281 : EN-Standard Guide for Nuclear Facility Decommissioning Plans
• ASTM E1282 : EN-Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals Ores and Related Materials
• ASTM E1283 : EN-Standard Guide for Procurement of Computer-Integrated Manufacturing Systems
• ASTM E1284 : EN-Standard Guide for Nosologic Standards and Guides for Construction of New Biomedical Nomenclature
• ASTM E1285 : EN-Standard Guide for Identification of Bacteriophage Lambda (Wavelength) or Its DNA
• ASTM E1286 : EN-Standard Guide for Identification of Herpes Simplex Virus or Its DNA
• ASTM E1287 : EN-Standard Practice for Aseptic Sampling of Biological Materials
• ASTM E1288 : EN-Standard Test Method for the Durability of Biomass Pellets
• ASTM E1289 : EN-Standard Specification for Reference Specimen for Sound Transmission Loss
• ASTM E129 : EN-Standard Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique
• ASTM E1290 : EN-Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
• ASTM E1291 : EN-Standard Test Method for Conducting a Saturated Vapor Inhalation Study with Rats
• ASTM E1292 : EN-STANDARD SPECIFICATION FOR GRAVITY CONVECTION AND FORCED VENTILATION INCUBATORS
• ASTM E1293 : EN-Standard Specification for Glass Measuring Pipets
• ASTM E1294 : EN-Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter
• ASTM E1295 : EN-Standard Guide for Conducting Three-Brood Renewal Toxicity Tests with Ceriodaphnia Dubia
• ASTM E1296 : EN-STANDARD TERMINOLOGY RELATING TO LIQUID PARTICLE STATISTICS
• ASTM E1296 REV A : EN-STANDARD TERMINOLOGY RELATING TO LIQUID PARTICLE STATISTICS
• ASTM E1297 : EN-STANDARD TEST METHOD FOR MEASURING FAST-NEUTRON REACTION RATES BY RADIOACTIVATION OF NIOBIUM
• ASTM E1298 : EN-Standard Guide for Determination of Purity Impurities and Contaminants in Biological Drug Products
• ASTM E1299 : EN-Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
• ASTM E130 : EN-Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes
• ASTM E1300 : EN-STANDARD PRACTICE FOR DETERMINING THE MINIMUM THICKNESS OF ANNEALED GLASS REQUIRED TO RESIST A SPECIFIED LOAD
• ASTM E1300 REV A : EN-Standard Practice for Determining Load Resistance of Glass in Buildings
• ASTM E1301 : EN-Standard Guide for Proficiency Testing by Interlaboratory Comparisons
• ASTM E1302 : EN-Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
• ASTM E1303 : EN-Practice for Refractive Index Detectors Used in Liquid Chromatography
• ASTM E1304 : EN-Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
• ASTM E1305 : EN-STANDARD PRACTICE FOR PREPARATION OF SINGLE ELEMENT CALIBRATION SOLUTIONS FOR ANALYTICAL ATOMIC SPECTROSCOPY
• ASTM E1306 : EN-STANDARD PRACTICE FOR PREPARATION OF REACTIVE AND REFRACTORY METAL AND ALLOY SAMPLES BY ELECTRIC ARC REMELTING FOR THE DETERMINATION OF CHEMICAL COMPOSITION
• ASTM E1307 : EN-STANDARD PRACTICE FOR SURFACE PREPARATION AND STRUCTURAL ADHESIVE BONDING OF PRECURED NONMETALLIC COMPOSITE FACINGS TO STRUCTURAL CORE FOR FLAT SHELTER PANELS
• ASTM E1308 : EN-Standard Guide for Identification of Polymers (Excludes Thermoset Elastomers) in Computerized Material Property Databases
• ASTM E1309 : EN-Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
• ASTM E131 : EN-TERMINOLOGY RELATING TO MOLECULAR SPECTROSCOPY
• ASTM E131 REV A : EN-TERMINOLOGY RELATING TO MOLECULAR SPECTROSCOPY
• ASTM E1310 : EN-STANDARD PRACTICE FOR USE OF A RADIOCHROMIC OPTICAL WAVEGUIDE DOSIMETRY SYSTEM
• ASTM E1311 : EN-Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
• ASTM E1312 : EN-Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
• ASTM E1313 : EN-STANDARD GUIDE FOR DEVELOPMENT OF STANDARD DATA RECORDS FOR COMPUTERIZATION OF MATERIAL PROPERTY DATA-(Discontinued 2000; No Replacement)
• ASTM E1313 REV A : EN-Standard Guide for Recommended Formats for Data Records Used in Computerization of Mechanical Test Data for Metals
• ASTM E1314 : EN-Standard Practice for Structuring Terminological Records Relating to Computerized Test Reporting and Materials Designation Formats
• ASTM E1315 : EN-Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces
• ASTM E1316 : EN-Standard Terminology for Nondestructive Testing
• ASTM E1316 REV A : EN-Standard Terminology for Nondestructive Testing
• ASTM E1316 REV B : EN-STANDARD TERMINOLOGY FOR NONDESTRUCTIVE EXAMINATIONS
• ASTM E1316 REV C : EN-STANDARD TERMINOLOGY FOR NONDESTRUCTIVE EXAMINATIONS
• ASTM E1317 : EN-STANDARD TEST METHOD FOR FLAMMABILITY OF MARINE SURFACE FINISHES
• ASTM E1317 REV A : EN-Standard Test Method for Flammability of Marine Surface Finishes
• ASTM E1317 REV B : EN-Standard Test Method for Flammability of Marine Surface Finishes
• ASTM E1318 : EN-Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
• ASTM E1319 : EN-Standard Practice for High-Temperature Strain Measurement
• ASTM E132 : EN-Standard Test Method for Poisson’s Ratio at Room Temperature
• ASTM E1320 : EN-Standard Reference Radiographs for Titanium Castings
• ASTM E1321 : EN-STANDARD TEST METHOD FOR DETERMINING MATERIAL IGNITION AND FLAME SPREAD PROPERTIES
• ASTM E1321 REV A : EN-Standard Test Method for Determining Material Ignition and Flame Spread Properties
• ASTM E1322 : EN-Standard Guide for Selection Training and Evaluation of Assessors for Laboratory Accreditation Systems
• ASTM E1323 : EN-Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
• ASTM E1324 : EN-STANDARD GUIDE FOR MEASURING SOME ELECTRONIC CHARACTERISTICS OF ULTRASONIC EXAMINATION INSTRUMENTS
• ASTM E1325 : EN-Standard Terminology Relating to Design of Experiments
• ASTM E1325 REV A : EN-STANDARD TERMINOLOGY RELATING TO DESIGN OF EXPERIMENTS
• ASTM E1326 : EN-Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria
• ASTM E1327 : EN-Standard Test Method for Evaluation of Health Care Personnel Handwash Formulations by Utilizing Fingernail Regions
• ASTM E1328 : EN-Standard Terminology Relating to Photovoltaic Solar Energy Conversion
• ASTM E1329 : EN-Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
• ASTM E133 : EN-Standard Specification for Distillation Equipment
• ASTM E1330 : EN-STANDARD PRACTICE FOR PREPARATION OF CALIBRATION SOLUTIONS FOR SPECTROPHOTOMETRIC AND FOR SPECTROSCOPIC ATOMIC ANALYSES
• ASTM E1331 : EN-Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
• ASTM E1332 : EN-Standard Classification for Determination of Outdoor-Indoor Transmission Class
• ASTM E1332 REV A : EN-Standard Classification for Rating Outdoor-Indoor Sound Attenuation
• ASTM E1333 : EN-STANDARD TEST METHOD FOR DETERMINING FORMALDEHYDE LEVELS FROM WOOD PRODUCTS UNDER DEFINED TEST CONDITIONS USING A LARGE CHAMBER
• ASTM E1334 : EN-Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
• ASTM E1335 : EN-Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
• ASTM E1336 : EN-Standard Test Method for Obtaining Colorimetric Data from a Visual Display Unit by Spectroradiometry
• ASTM E1337 : EN-Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
• ASTM E1338 : EN-Standard Guide for the Identification of Metals and Alloys in Computerized Material Property Databases-Replaces E1339-90
• ASTM E1339 : EN-Standard Guide for Identification of Aluminum Alloys and Parts in Computerized Material Property Databases
• ASTM E134 : EN-STANDARD SPECIFICATION FOR PENSKY-MARTENS CLOSED FLASH TESTER
• ASTM E1340 : EN-Standard Guide for Rapid Prototyping of Information Systems
• ASTM E1341 : EN-Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
• ASTM E1342 : EN-Standard Practice for Preservation by Freezing Freeze-Drying and Low Temperature Maintenance of Bacteria Fungi Protista Viruses Genetic Elements and Animal and Plant Tissues
• ASTM E1343 : EN-Standard Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes
• ASTM E1344 : EN-Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
• ASTM E1345 : EN-Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
• ASTM E1346 : EN-Standard Practice for Bulk Sampling Handling and Preparing Edible Vegetable Oils for Sensory Evaluation
• ASTM E1347 : EN-Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
• ASTM E1348 : EN-Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
• ASTM E1349 : EN-Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
• ASTM E135 : EN-Standard Terminology Relating to Analytical Chemistry for Metals Ores and Related Materials
• ASTM E135 REV A : EN-STANDARD TERMINOLOGY RELATING TO EMISSION SPECTROSCOPY
• ASTM E135 REV B : EN-STANDARD TERMINOLOGY RELATING TO ANALYTICAL CHEMISTRY FOR METALS ORES AND RELATED MATERIALS
• ASTM E135 REV C : EN-Standard Terminology Relating to Analytical Chemistry for Metals Ores and Related Materials
• ASTM E135 REV D : EN-Standard Terminology Relating to Analytical Chemistry for Metals Ores and Related Materials
• ASTM E1350 : EN-Standard Test Methods for Testing Sheathed Thermocouples Prior to During and After Installation
• ASTM E1351 : EN-Standard Practice for Production and Evaluation of Field Metallographic Replicas
• ASTM E1352 : EN-Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
• ASTM E1352 REV A : EN-Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
• ASTM E1353 : EN-Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
• ASTM E1353 REV A : EN-Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
• ASTM E1354 : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
• ASTM E1354 REV A : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
• ASTM E1354 REV D : EN-Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
• ASTM E1355 : EN-Standard Guide for Evaluating the Predictive Capability of Fire Models
• ASTM E1355 REV A : EN-Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
• ASTM E1356 : EN-Standard Test Method for Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
• ASTM E1357 : EN-Standard Test Method for Determining the Rate of Bioleaching of Iron from Pyrite by Thiobacillus Ferrooxidans
• ASTM E1358 : EN-Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
• ASTM E1359 : EN-Standard Guide for Surveying Nondestructive Testing Agencies
• ASTM E1359 REV A : EN-Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies
• ASTM E136 : EN-STANDARD TEST METHOD FOR BEHAVIOR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C
• ASTM E136 REV A : EN-STANDARD TEST METHOD FOR BEHAVIOR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C
• ASTM E136 REV B : EN-STANDARD TEST METHOD FOR BEHAVIOR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C
• ASTM E136 REV C : EN-STANDARD TEST METHOD FOR BEHAVIOR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C
• ASTM E136 REV D : EN-STANDARD TEST METHOD FOR BEHAVIOR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C
• ASTM E1360 : EN-Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
• ASTM E1361 : EN-Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
• ASTM E1362 : EN-Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
• ASTM E1363 : EN-Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
• ASTM E1364 : EN-STANDARD TEST METHOD FOR MEASURING ROAD ROUGHNESS BY STATIC LEVEL METHOD
• ASTM E1365 : EN-STANDARD GUIDE FOR CONDUCTING STATIC ACUTE AQUATIC TOXICITY SCREENING TESTS WITH THE MOSQUITO WYEOMYIA SMITHII (COQUILLETT)
• ASTM E1366 : EN-STANDARD PRACTICE FOR STANDARDIZED AQUATIC MICROCOSMS: FRESH WATER
• ASTM E1367 : EN-Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
• ASTM E1368 : EN-Standard Practice for Visual Inspection of Asbestos Abatement Projects
• ASTM E1368 REV A : EN-Standard Practice for Visual Inspection of Asbestos Abatement Projects
• ASTM E1369 : EN-Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
• ASTM E137 : EN-STANDARD PRACTICE FOR EVALUATION OF MASS SPECTROMETERS FOR QUANTITATIVE ANALYSIS FROM A BATCH INLET
• ASTM E1370 : EN-Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
• ASTM E1371 : EN-Standard Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys
• ASTM E1372 : EN-Standard Test Method for Conducting a 90-Day Oral Toxicity Study in Rats
• ASTM E1373 : EN-STANDARD TEST METHOD FOR CONDUCTING A SUBCHRONIC INHALATION TOXICITY STUDY IN RATS
• ASTM E1374 : EN-STANDARD GUIDE FOR OPEN OFFICE ACOUSTICS AND APPLICABLE ASTM STANDARDS
• ASTM E1375 : EN-Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers
• ASTM E1376 : EN-Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels
• ASTM E1377 : EN-Standard Specification for Laboratory Glass Kjeldahl Flasks
• ASTM E1378 : EN-Standard Specification for Laboratory Glass Multiple Neck Distilling /Boiling Flasks
• ASTM E1379 : EN-Standard Specification for Laboratory Glass Dewar Flask
• ASTM E1380 : EN-Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations 0.1 mL and Larger But Excluding Disposable Prothrombin and Disposable Micropipets
• ASTM E1381 : EN-Standard Specification for Low-Level Protocol to Transfer Messages between Clinical Laboratory Instruments and Computer Systems
• ASTM E1382 : EN-Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
• ASTM E1383 : EN-STANDARD GUIDE FOR CONDUCTING SEDIMENT TOXICITY TESTS WITH FRESHWATER INVERTEBRATES
• ASTM E1383 REV A : EN-Standard Guide for Conducting Sediment Toxicity Tests with Freshwater Invertebrates
• ASTM E1384 : EN-Standard Practice for Content and Structure of the Electronic Health Record (EHR)
• ASTM E1384 REV A : EN-Standard Practice for Content and Structure of the Electronic Health Record (EHR)
• ASTM E1385 : EN-Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation
• ASTM E1386 : EN-Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
• ASTM E1387 : EN-Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
• ASTM E1388 : EN-Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
• ASTM E1389 : EN-Standard Practice for Cleanup of Fire Debris Sample Extracts by Acid Stripping
• ASTM E139 : EN-Standard Test Methods for Conducting Creep Creep-Rupture and Stress-Rupture Tests of Metallic Materials
• ASTM E1390 : EN-Standard Specification for Illuminators Used for Viewing Industrial Radiographs
• ASTM E1391 : EN-Standard Guide for Collection Storage Characterization and Manipulation of Sediments for Toxicological Testing-Replaces D 4342:1984 D 4343:1984 D 4344:1984 D 4345:1984 D 4347:1984 D 4348:1984 D 4387:2002 D
• ASTM E1392 : EN-Standard Practice for Angle Resolved Optical Scatter Measurements on Specular or Diffuse Surfaces
• ASTM E1393 : EN-Standard Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine
• ASTM E1394 : EN-Standard Specification for Transferring Information between Clinical Instruments and Computer Systems
• ASTM E1395 : EN-Standard Test Method for Sensory Evaluation of Low Heat Chilies
• ASTM E1396 : EN-Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
• ASTM E1397 : EN-Standard Practice for the in Vitro Rat Hepatocyte DNA Repair Assay
• ASTM E1398 : EN-Standard Practice for In Vivo Rat Hepatocyte DNA Repair Assay
• ASTM E1399 : EN-Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
• ASTM E140 : EN-STANDARD HARDNESS CONVERSION TABLES FOR METALS
• ASTM E1400 : EN-STANDARD PRACTICE FOR CHARACTERIZATION AND PERFORMANCE OF A HIGH-DOSE RADIATION DOSIMETRY CALIBRATION LABORATORY
• ASTM E1400 REV A : EN-Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
• ASTM E1401 : EN-STANDARD PRACTICE FOR USE OF A DICHROMATE DOSIMETRY SYSTEM
• ASTM E1402 : EN-Standard Terminology Relating to Sampling
• ASTM E1403 : EN-Standard Specification for Laboratory Glass Boiling Flasks
• ASTM E1404 : EN-STANDARD SPECIFICATION FOR LABORATORY GLASS CONICAL FLASKS
• ASTM E1405 : EN-Standard Specification for Laboratory Glass Distillation Flasks
• ASTM E1406 : EN-Standard Specification for Laboratory Glass Filter Flasks
• ASTM E1407 : EN-Standard Guide for Materials Database Management
• ASTM E1408 : EN-Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems
• ASTM E1409 : EN-Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
• ASTM E141 : EN-STANDARD RECOMMENDED PRACTICE FOR ACCEPTANCE OF EVIDENCE BASED ON THE RESULTS OF PROBABILITY SAMPLING (R 1975)
• ASTM E1410 : EN-Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
• ASTM E1411 : EN-Standard Practice for Qualification of Radioscopic Systems
• ASTM E1412 : EN-Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Activated Charcoal
• ASTM E1413 : EN-Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
• ASTM E1413 (RL) : EN-Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
• ASTM E1414 : EN-Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
• ASTM E1414 REV A : EN-Standard Test Method for Airborne Sound Attenuation between Rooms Sharing a Common Ceiling Plenum
• ASTM E1415 : EN-Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3
• ASTM E1416 : EN-Standard Test Method for Radioscopic Examination of Weldments
• ASTM E1417 : EN-Standard Practice for Liquid Penetrant Testing
• ASTM E1417 REV A : EN-Standard Practice for Liquid Penetrant Examination
• ASTM E1418 : EN-STANDARD TEST METHOD FOR VISIBLE PENETRANT EXAMINATION USING THE WATER-WASHABLE PROCESS
• ASTM E1419 : EN-Standard Test Method for Examination of Seamless Gas-Filled Pressure Vessels Using Acoustic Emission
• ASTM E1419 REV A : EN-Standard Test Method for Examination of Seamless Gas-Filled Pressure Vessels Using Acoustic Emission
• ASTM E1419 REV B : EN-Standard Test Method for Examination of Seamless Gas-Filled Pressure Vessels Using Acoustic Emission
• ASTM E142 : EN-Standard Method for Controlling Quality of Radiographic Testing
• ASTM E1420 : EN-Standard Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments
• ASTM E1421 : EN-Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
• ASTM E1422 : EN-Standard Guide for Test Methods for Forensic Writing Ink Comparison
• ASTM E1423 : EN-Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems
• ASTM E1424 : EN-Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows Curtain Walls and Doors Under Specified Pressure and Temperature Differences Across the Specimen
• ASTM E1425 : EN-Standard Practice for Determining the Acoustical Performance of Windows Doors Skylight and Glazed Wall Systems
• ASTM E1426 : EN-Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
• ASTM E1427 : EN-Standard Guide for Selecting Test Methods to Determine the Effectiveness of Antimicrobial Agents and Other Chemicals for the Prevention Inactivation and Removal of Biofilm
• ASTM E1428 : EN-Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium Reticulum (a Pink Stain Organism)
• ASTM E1429 : EN-Standard Guide for Assessing the Health Hazard of Pesticides to Applicators and Others with Potential Exposure
• ASTM E143 : EN-Standard Test Method for Shear Modulus at Room Temperature
• ASTM E1431 : EN-Standard Practice for Dosimetry in Electron and Bremsstrahlung Irradiation Facilities for Food Processing
• ASTM E1432 : EN-Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size
• ASTM E1433 : EN-STANDARD GUIDE FOR SELECTION OF STANDARDS ON ENVIRONMENTAL ACOUSTICS
• ASTM E1434 : EN-Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
• ASTM E1435 : EN-Standard Practice for Handling Densified Articles of Aluminum Oxide Reinforced with Silicon Carbide Whiskers
• ASTM E1436 : EN-Standard Practice for Handling Densified Articles of Silicon Nitride Reinforced with Silicon Carbide Whiskers
• ASTM E1437 : EN-Standard Practice for Handling Silicon Carbide Whiskers
• ASTM E1438 : EN-Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS
• ASTM E1439 : EN-Standard Guide for Conducting the Frog Embryo Teratogenesis Assay-Xenopus (FETAX)
• ASTM E144 : EN-Standard Practice for Safe Use of Oxygen Combustion Bombs
• ASTM E1440 : EN-Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
• ASTM E1441 : EN-Standard Guide for Computed Tomography (CT) Imaging
• ASTM E1441 REV A : EN-STANDARD GUIDE FOR COMPUTED TOMOGRAPHY (CT) IMAGING
• ASTM E1441 REV B : EN-STANDARD GUIDE FOR COMPUTED TOMOGRAPHY (CT) IMAGING
• ASTM E1442 : EN-STANDARD PRACTICE FOR HIGHWAY-TRAFFIC MONITORING
• ASTM E1442 REV A : EN-STANDARD PRACTICE FOR HIGHWAY-TRAFFIC MONITORING
• ASTM E1443 : EN-STANDARD TERMINOLOGY RELATING TO BUILDING AND ACCESSING MATERIAL AND CHEMICAL DATABASES
• ASTM E1443 REV A : EN-STANDARD TERMINOLOGY RELATING TO BUILDING AND ACCESSING MATERIAL AND CHEMICAL DATABASES
• ASTM E1443 REV B : EN-STANDARD TERMINOLOGY RELATING TO BUILDING AND ACCESSING MATERIAL AND CHEMICAL DATABASES
• ASTM E1443 REV C : EN-STANDARD TERMINOLOGY RELATING TO BUILDING AND ACCESSING MATERIAL AND CHEMICAL DATABASES
• ASTM E1443 REV D : EN-STANDARD TERMINOLOGY RELATING TO BUILDING AND ACCESSING MATERIAL AND CHEMICAL DATABASES
• ASTM E1444 : EN-Standard Practice for Magnetic Particle Testing
• ASTM E1444 REV A : EN-Standard Practice for Magnetic Particle Examination
• ASTM E1445 : EN-Standard Terminology Relating to Hazardous Potential of Chemicals
• ASTM E1446 : EN-Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry
• ASTM E1447 : EN-Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
• ASTM E1448 : EN-Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
• ASTM E1448/E1448M : EN-Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
• ASTM E1449 : EN-Standard Guide for Supercritical Fluid Chromatography Terms and Relationships
• ASTM E145 : EN-Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
• ASTM E1450 : EN-Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
• ASTM E1451 : EN-Standard Guide for Disposal of Wastes Containing Silicon Carbide Whiskers and Fibers
• ASTM E1452 : EN-Standard Practice for Preparation of Calibration Solutions for Spectrophotometric and for Spectroscopic Atomic Analysis
• ASTM E1453 : EN-Standard Guide for Storage of Media That Contains Analog or Digital Radioscopic Data
• ASTM E1454 : EN-Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data
• ASTM E1455 : EN-Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
• ASTM E1455 REV A : EN-Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
• ASTM E1456 : EN-Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)
• ASTM E1457 : EN-Standard Test Method for Measurement of Creep Crack Growth Times in Metals
• ASTM E1458 : EN-Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
• ASTM E1459 : EN-Standard Guide for Physical Evidence Labeling and Related Documentation
• ASTM E146 : EN-Standard Methods for Chemical Analysis of Zirconium and Zirconium Alloys
• ASTM E1460 : EN-Standard Specification for Defining and Sharing Modular Health Knowledge Bases (Arden Syntax for Medical Logic Modules)
• ASTM E1461 : EN-Standard Test Method for Thermal Diffusivity of Solids by the Flash Method
• ASTM E1462 : EN-Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
• ASTM E1463 : EN-Standard Guide for Conducting Static and Flow-Through Acute Toxicity Tests with Mysids From the West Coast of the United States
• ASTM E1464 : EN-Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
• ASTM E1465 : EN-Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
• ASTM E1465 REV A : EN-Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
• ASTM E1466 : EN-Standard Specification for Use of Bar Codes on Specimen Tubes in the Clinical Laboratory
• ASTM E1467 : EN-Standard Specification for Transferring Digital Neurophysiological Data between Independent Computer Systems
• ASTM E1468 : EN-Standard Practice for Collecting Benthic Macroinvertebrates with the Basket Sampler
• ASTM E1469 : EN-Standard Practice for Collecting Benthic Macroinvertebrates with Multiple-Plate Samplers
• ASTM E147 : EN-Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
• ASTM E1470 : EN-Standard Test Method for Characterization of Proteins by Electrophoretic Mobility
• ASTM E1471 : EN-Standard Guide for Identification of Fibers Fillers and Core Materials in Computerized Material Property Databases
• ASTM E1472 : EN-Standard Guide for Documenting Computer Software for Fire Models
• ASTM E1473 : EN-STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF NICKEL COBALT AND HIGH-TEMPERATURE ALLOYS
• ASTM E1473 REV A : EN-Standard Test Methods for Chemical Analysis of Nickel Cobalt and High-Temperature Alloys
• ASTM E1474 : EN-Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
• ASTM E1474 REV A : EN-Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
• ASTM E1475 : EN-Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data
• ASTM E1476 : EN-Standard Guide for Metals Identification Grade Verification and Sorting
• ASTM E1477 : EN-Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
• ASTM E1477 REV A : EN-Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
• ASTM E1478 : EN-Standard Practice for Visual Color Evaluation of Transparent Sheet Materials
• ASTM E1479 : EN-Standard Practice for Describing and Specifying Inductively-Coupled Plasma Optical Emission Spectrometers
• ASTM E148 : EN-STANDARD SPECIFICATION FOR APPARATUS FOR MICRODETERMINATION OF NITROGEN BY DUMAS METHOD
• ASTM E1480 : EN-Standard Terminology of Facility Management (Building-Related)
• ASTM E1481 : EN-STANDARD TERMINOLOGY OF RAILING SYSTEMS AND RAILS FOR BUILDINGS
• ASTM E1481 REV A : EN-STANDARD TERMINOLOGY OF RAILING SYSTEMS AND RAILS FOR BUILDINGS
• ASTM E1482 : EN-Standard Test Method for Neutralization of Virucidal Agents in Virucidal Efficacy Evaluations
• ASTM E1483 : EN-Standard Test Method for Assessing Developmental Toxicity in Rats and Rabbits
• ASTM E1484 : EN-Standard Guide for Formatting and Use of Material and Chemical Property Data and Database Quality Indicators
• ASTM E1485 : EN-Standard Guide for Development of Material and Chemical Property Database Descriptions
• ASTM E1486 : EN-Standard Test Method for Determining Floor Tolerances Using Waviness Wheel Path and Levelness Criteria
• ASTM E1486M : EN-Standard Test Method for Determining Floor Tolerances Using Waviness Wheel Path and Levelness Criteria (미터)
• ASTM E1488 : EN-Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
• ASTM E1488 REV A : EN-Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
• ASTM E1489 : EN-Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
• ASTM E1490 : EN-Standard Practice for Descriptive Skinfeel Analysis of Creams and Lotions
• ASTM E1491 : EN-Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
• ASTM E1492 : EN-Standard Practice for Receiving Documenting Storing and Retrieving Evidence in a Forensic Science Laboratory
• ASTM E1493 : EN-Standard Guide for Identification of Bacteriophage M13 or Its DNA
• ASTM E1494 : EN-Standard Practice for Encapsulants for Spray-Or-Trowel-Applied Friable Asbestos-Containing Building Materials
• ASTM E1495 : EN-STANDARD GUIDE FOR ACOUSTO-ULTRASONIC ASSESSMENT OF MECHANICAL PROPERTIES OF COMPOSITES LAMINATES AND BONDED JOINTS
• ASTM E1496 : EN-Standard Test Method for Neutron Radiographic Dimensional Measurements
• ASTM E1497 : EN-Standard Practice for Selection and Safe Use of Water-Miscible and Straight Oil Metal Removal Fluids
• ASTM E1498 : EN-Standard Guide for Conducting Sexual Reproduction Tests with Seaweeds
• ASTM E1499 : EN-Standard Guide to the the Selection Evaluation and Training of Observers
• ASTM E1500 : EN-Standard Practice for Computing Mean Square Numerics from Road Surface Profile Records
• ASTM E1501 : EN-Standard Specification for Nighttime Photometric Performance of Retroreflective Pedestrian Markings for Visibility Enhancement
• ASTM E1502 : EN-Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
• ASTM E1503 : EN-Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
• ASTM E1504 : EN-Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)
• ASTM E1505 : EN-Standard Guide for Determining SIMS Relative Sensitivity Factors from Ion Implanted External Standards
• ASTM E1506 : EN-Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)
• ASTM E1506 REV A : EN-STANDARD TEST METHODS FOR ANALYSIS OF ACID-GRADE CALCIUM FLUORIDE (FLUORSPAR)
• ASTM E1507 : EN-Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument
• ASTM E1508 : EN-Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
• ASTM E1508 REV A : EN-Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
• ASTM E1509 : EN-Standard Specification for Room Heaters Pellet Fuel-Burning Type
• ASTM E1510 : EN-Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
• ASTM E1511 : EN-Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography
• ASTM E1512 : EN-Standard Test Methods for Testing Bond Performance of Bonded Anchors
• ASTM E1513 : EN-Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
• ASTM E1514 : EN-Standard Specification for Structural Standing Seam Steel Roof Panel Systems
• ASTM E1515 : EN-Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
• ASTM E1515 REV A : EN-Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
• ASTM E1516 : EN-Standard Guide for Packaging of Unbound Respirable Silicon Carbide Whiskers
• ASTM E1517 : EN-Standard Test Method for Determining the Effectiveness of Liquid Gel Cream or Shampoo Insecticides Against Human Louse OVA
• ASTM E1518 : EN-Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method
• ASTM E1519 : EN-STANDARD TERMINOLOGY RELATING TO AGRICULTURAL TANK MIX
• ASTM E1519 REV A : EN-Standard Terminology Relating to Agricultural Tank Mix Adjuvants
• ASTM E152 REV A : EN-Standard Methods of FIRE TESTS OF DOOR ASSEMBLlES
• ASTM E1520 : EN-Standard Test Method for Particle Counts per Pound of Granular Carriers and Dry-Applied Granular Formulations
• ASTM E1521 : EN-Standard Test Method for Liquid Holding Capacity of Granular Carriers
• ASTM E1522 : EN-Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
• ASTM E1523 : EN-Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy
• ASTM E1524 : EN-Standard Test Method for Saltwater Immersion and Corrosion Testing of Photovoltaic Modules for Marine Environments
• ASTM E1525 : EN-Standard Guide for Designing Biological Tests with Sediments
• ASTM E1525 REV A : EN-Standard Guide for Designing Biological Tests with Sediments
• ASTM E1526 : EN-Standard Practice for Evaluating the Performance of Release Detection Systems for Underground Storage Tank Systems
• ASTM E1527 : EN-Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
• ASTM E1528 : EN-Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
• ASTM E1529 : EN-Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
• ASTM E1530 : EN-Standard Test Method for Evaluating the Resistance to Thermal Transmission of Thin Specimens of Materials by the Guarded Heat Flow Meter Technique
• ASTM E1531 : EN-Standard Practice for Direct Detection of Mycoplasma in Cell Culture by Broth Enrichment and Agar Growth
• ASTM E1532 : EN-Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by DNA Binding with Bisbenzamide Fluorochrome Stain
• ASTM E1533 : EN-Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4′-6-Diamidino-2-2 Phenylindole (DAPI) Staining
• ASTM E1534 : EN-Standard Test Method for Determination of ASH Content of Particulate Wood Fuels
• ASTM E1535 : EN-Standard Test Method for Performance Evaluation of Anaerobic Digestion Systems
• ASTM E1536 : EN-Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by the Large Volume Method
• ASTM E1537 : EN-Standard Test Method for Fire Testing of Upholstered Seating Furniture
• ASTM E1537 REV A : EN-Standard Test Method for Fire Testing of Upholstered Furniture
• ASTM E1537 REV B : EN-STANDARD TEST METHOD FOR FIRE TESTING OF REAL SCALE UPHOLSTERED FURNITURE ITEMS
• ASTM E1538 : EN-Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
• ASTM E1539 : EN-Standard Guide for Use of Radiation-Sensitive Indicators
• ASTM E154 : EN-Standard Test Methods for Water Vapor Retarders Used in Contact with Earth under Concrete Slabs on Walls or as Ground Cover
• ASTM E154 REV A : EN-Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs on Walls or as Ground Cover
• ASTM E1540 : EN-Standard Practice for Use of a Radiochromic Liquid Dosimetry System
• ASTM E1541 : EN-Standard Practice for Specifying and Matching Color Using the Colorcurve System
• ASTM E1542 : EN-Standard Terminology Relating to Occupational Health and Safety
• ASTM E1543 : EN-STANDARD TEST METHOD FOR NOISE EQUIVALENT TEMPERATURE DIFFERENCE OF THERMAL IMAGING SYSTEMS
• ASTM E1544 : EN-Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-Of-Sound Measurement Systems for Use on Solids
• ASTM E1545 : EN-STANDARD TEST METHOD FOR GLASS TRANSITION TEMPERATURES BY THERMOMECHANICAL ANALYSIS-DOCUMENT NOT AVAILABLE
• ASTM E1545 REV A : EN-Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
• ASTM E1546 : EN-Standard Guide for Development of Fire-Hazard-Assessment Standards
• ASTM E1546 REV A : EN-Standard Guide for Development of Fire-Hazard-Assessment Standards
• ASTM E1547 : EN-Standard Terminology Relating to Industrial Chemicals
• ASTM E1548 : EN-Standard Practice for Preparation of Aerospace Contamination Control Plans
• ASTM E1549 : EN-Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
• ASTM E1549M : EN-Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
• ASTM E155 : EN-Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
• ASTM E1550 : EN-Standard Test Method for a Reproduction and Fertility Study in Rats
• ASTM E1551 : EN-Standard Specification for Special Purpose Smooth-Tread Tire Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
• ASTM E1551 REV A : EN-Standard Specification for Special Purpose Smooth-Tread Tire Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
• ASTM E1552 : EN-Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using DC Argon Plasma Spectrometry
• ASTM E1553 : EN-Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities
• ASTM E1554 : EN-Standard Test Methods for Determining External Air Leakage of Air Distribution Systems by Fan Pressurization
• ASTM E1555 : EN-Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
• ASTM E1555 REV A : EN-Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
• ASTM E1556 : EN-Standard Specification for Epoxy Resin System for Composite Skin Honeycomb Sandwich Panel Repair
• ASTM E1556 REV A : EN-Standard Specification for Epoxy Resin System for Composite Skin Honeycomb Sandwich Panel Repair
• ASTM E1557 : EN-Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
• ASTM E1558 : EN-Standard Guide for Electrolytic Polishing of Metallographic Specimens
• ASTM E1559 : EN-Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
• ASTM E156 : EN-STANDARD TEST METHOD FOR DETERMINATION OF PHOSPHORUS IN HIGH- PHOSPHORUS BRAZING ALLOYS (PHOTOMETRIC METHOD)
• ASTM E1560 : EN-Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Wipers
• ASTM E1560M : EN-Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Wipers
• ASTM E1561 : EN-Standard Practice for Analysis of Strain Gage Rosette Data
• ASTM E1562 : EN-Standard Guide for Conducting Acute Chronic and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids
• ASTM E1563 : EN-Standard Guide for Conducting Static Acute Toxicity Tests with Echinoid Embryos
• ASTM E1564 : EN-Standard Guide for Design and Maintenance of Low- Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
• ASTM E1565 : EN-Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures
• ASTM E1566 : EN-Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen
• ASTM E1567 : EN-Standard Guide for Biopharmaceutical Facilities Architectural Design Considerations
• ASTM E1568 : EN-Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
• ASTM E1569 : EN-Standard Test Method for Determination of Oxygen in Tantalum Powder
• ASTM E157 : EN-Standard Practice for Assigning Crystallographic Phase Designations in Metallic Systems
• ASTM E157 REV A : EN-STANDARD METHOD OF ASSIGNING CRYSTALLOGRAPHIC PHASE DESIGNATIONS IN METALLIC SYSTEMS (E1-1983)
• ASTM E1570 : EN-STANDARD PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION
• ASTM E1570 REV A : EN-Standard Practice for Computed Tomographic (CT) Examination
• ASTM E1571 : EN-Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope
• ASTM E1594 : EN-Standard Guide for Expression of Temperature
• ASTM E1595 : EN-Standard Practice for Evaluating the Performance of Mechanical Testing Laboratories
• ASTM E1595 REV A : EN-Standard Practice for Evaluating the Performance of Mechanical Testing Laboratories
• ASTM E1596 : EN-Standard Test Methods for Solar Radiation Weathering of Photovoltaic Modules
• ASTM E1597 : EN-Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
• ASTM E1598 : EN-Standard Practice for Conducting Early Seedling Growth Tests
• ASTM E1599 : EN-Standard Guide for Corrective Action for Petroleum Releases
• ASTM E160 : EN-STANDARD TEST METHOD FOR COMBUSTIBLE PROPERTIES OF TREATED WOOD BY THE CRIB TEST
• ASTM E1600 : EN-Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry
• ASTM E1601 : EN-Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
• ASTM E1602 : EN-Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
• ASTM E1603 : EN-Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
• ASTM E1604 : EN-Standard Guide for Behavioral Testing in Aquatic Toxicology
• ASTM E1605 : EN-Standard Terminology Relating to Lead in Buildings
• ASTM E1605 REV A : EN-Standard Terminology Relating to Lead in Buildings
• ASTM E1605 REV B : EN-Standard Terminology Relating to Lead in Buildings
• ASTM E1606 : EN-Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes
• ASTM E1607 : EN-Standard Practice for Use of the Alanine-EPR Dosimetry System
• ASTM E1608 : EN-Standard Practice for Dosimetry in an X-Ray (제동 복사) 방사선 처리를위한 시설
• ASTM E1609 : EN-Standard Guide for Development and Implementation of a Pollution Prevention Program
• ASTM E161 : EN-Standard Specification for Precision Electroformed Sieves
• ASTM E1610 : EN-Standard Guide for Forensic Paint Analysis and Comparison
• ASTM E1611 : EN-Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids
• ASTM E1612 : EN-Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
• ASTM E1613 : EN-Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) Flame Atomic Absorption Spectrometry (FAAS) or Graphite Furnace Atomic Absorption Spectrometry (GF
• ASTM E1614 : EN-Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems
• ASTM E1615 : EN-Standard Test Methods for Iron in Trace Quantities Using the FerroZine Method
• ASTM E1616 : EN-Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography
• ASTM E1617 : EN-Standard Practice for Reporting Particle Size Characterization Data
• ASTM E1618 : EN-Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
• ASTM E1619 : EN-Standard Test Method for Cronic Oral Toxicity Study in Rats
• ASTM E162 : EN-Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
• ASTM E162 REV A : EN-Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
• ASTM E162 REV B : EN-Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
• ASTM E1620 : EN-Standard Terminology Relating to Liquid Particles and Atomization
• ASTM E1620 REV A : EN-Standard Terminology Relating to Liquid Particles and Atomization
• ASTM E1621 : EN-Standard Guide for X-Ray Emission Spectrometric Analysis
• ASTM E1622 : EN-Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry
• ASTM E1623 : EN-Standard Test Method for Determination of Fire and Thermal Parameters of Materials Products and Systems Using an Intermediate Scale Calorimeter (ICAL)
• ASTM E1623 REV A : EN-Standard Test Method for Determination of Fire and Thermal Parameters of Materials Products and Systems Using an Intermediate Scale Calorimeter (ICAL)
• ASTM E1623 REV B : EN-Standard Test Method for Determination of Fire and Thermal Parameters of Materials Products and Systems Using an Intermediate Scale Calorimeter (ICAL)
• ASTM E1624 : EN-Standard Guide for Chemical Fate in Site-Specific Sediment/Water Microcosms
• ASTM E1625 : EN-Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
• ASTM E1626 : EN-Standard Guide for Including Government Procurement Requirements in ASTM Documents
• ASTM E1627 : EN-Standard Practice for Sensory Evaluation of Edible Oils and Fats
• ASTM E1628 : EN-Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration
• ASTM E1629 : EN-Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
• ASTM E163 : EN-Standard Methods of Fire Tests of Window Assemblies
• ASTM E1631 : EN-Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
• ASTM E1633 : EN-Standard Specification for Coded Values Used in the Electronic Health Record
• ASTM E1633 REV A : EN-Standard Specification for Coded Values Used in the Electronic Health Record
• ASTM E1634 : EN-Standard Guide for Performing Sputter Crater Depth Measurements
• ASTM E1635 : EN-Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)
• ASTM E1636 : EN-Standard Practice for Analytically Describing Sputter-Depth-Profile Interface Data by an Extended Logistic Function
• ASTM E1637 : EN-Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
• ASTM E1638 : EN-Standard Terminology Relating to Sieves Sieving Methods and Screening Media
• ASTM E1638 REV A : EN-Standard Terminology Relating to Sieves Sieving Methods and Screening Media
• ASTM E1639 : EN-Standard Guide for Functional Requirements of Clinical Laboratory Information Management Systems
• ASTM E164 : EN-STANDARD PRACTICE FOR ULTRASONIC CONTACT EXAMINATION OF WELDMENTS
• ASTM E164 REV A : EN-Standard Practice for Ultrasonic Contact Examination of Weldments
• ASTM E1640 : EN-Standard Test Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis
• ASTM E1641 : EN-Standard Test Method for Decomposition Kinetics by Thermogravimetry
• ASTM E1642 : EN-Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
• ASTM E1643 : EN-Standard Practice for Selection Design Installation and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
• ASTM E1644 : EN-Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead-Replaces ES36-94
• ASTM E1645 : EN-Standard Practice for the Preparation of Dried Paint Samples for Subsequent Lead Analysis by Atomic Sprectrometry-Replaces ES37-94
• ASTM E1646 : EN-Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
• ASTM E1647 : EN-Standard Practice for Determining Contrast Sensitivity in Radioscopy
• ASTM E1647 REV A : EN-Standard Practice for Determining Contrast Sensitivity in Radioscopy
• ASTM E1648 : EN-Standard Reference Radiographs for Examination of Aluminum Fusion Welds
• ASTM E1649 : EN-Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 300 케빈과 25 백만 전자 볼트
• ASTM E165 : EN-STANDARD TEST METHOD FOR LIQUID PENETRANT EXAMINATION
• ASTM E1650 : EN-Standard Practice for Use of Cellulose Acetate Dosimetry System
• ASTM E1651 : EN-Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
• ASTM E1652 : EN-Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers Base Metal Thermocouples and Noble Metal Ther
• ASTM E1653 : EN-Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
• ASTM E1654 : EN-Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman Fiber-Optic Spectroscopy
• ASTM E1655 : EN-Standard Practices for Infrared Multivariate Quantitative Analysis
• ASTM E1656 : EN-Standard Guide for Classification of Automated Pavement Condition Survey Equipment
• ASTM E1657 : EN-STANDARD PRACTICE FOR TESTING VARIABLE-WAVELENGTH PHOTOMETRIC DETECTORS USED IN LIQUID CHROMATOGRAPHY
• ASTM E1658 : EN-Standard Terminology for Expressing Conclusions of Forensic Document
• ASTM E1659 : EN-Standard Test Methods for Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
• ASTM E1660 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR SUPPORT FOR OFFICE WORK
• ASTM E1660 REV A : EN-Standard Classification for Serviceability of an Office Facility for Support for Office Work
• ASTM E1661 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR MEETINGS AND GROUP EFFECTIVENESS
• ASTM E1661 REV A : EN-Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
• ASTM E1662 : EN-STANDARD CLASSIFICATION FOR THE SERVICEABILITY OF AN OFFICE FACILITY FOR SOUND AND VISUAL ENVIRONMENT
• ASTM E1662 REV A : EN-Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
• ASTM E1663 : EN-Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
• ASTM E1663 REV A : EN-Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
• ASTM E1664 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR LAYOUT AND BUILDING FACTORS
• ASTM E1664 REV A : EN-Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
• ASTM E1665 : EN-STANDARD CLASSIFICATION FOR THE SERVICEABILITY OF AN OFFICE FACILITY FOR FACILITY PROTECTION
• ASTM E1665 REV A : EN-Standard Classification for Serviceability of an Office Facility for Facility Protection
• ASTM E1666 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR WORK OUTSIDE NORMAL HOURS OR CONDITIONS
• ASTM E1666 REV A : EN-Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
• ASTM E1667 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR IMAGE TO THE PUBLIC AND OCCUPANTS
• ASTM E1667 REV A : EN-Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
• ASTM E1668 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR AMENITIES TO ATTRACT AND RETAIN STAFF
• ASTM E1668 REV A : EN-Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
• ASTM E1669 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR LOCATION ACCESS AND WAYFINDING
• ASTM E1669 REV A : EN-Standard Classification for Serviceability of an Office Facility for Location Access and Wayfinding
• ASTM E167 : EN-STANDARD RECOMMENDED PRACTICE FOR GONIOPHOTOMETRY OF OBJECTS AND MATERIALS (R 1987)
• ASTM E1670 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR MANAGEMENT OF OPERATIONS AND MAINTENANCE
• ASTM E1670 REV A : EN-Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
• ASTM E1671 : EN-STANDARD CLASSIFICATION FOR SERVICEABILITY OF AN OFFICE FACILITY FOR CLEANLINESS
• ASTM E1671 REV A : EN-Standard Classification for Serviceability of an Office Facility for Cleanliness
• ASTM E1672 : EN-Standard Guide for Computed Tomography (CT) System Selection
• ASTM E1673 : EN-Standard Test Method for Percent Suspensibility
• ASTM E1674 : EN-Standard Test Method for Cardiac Sensitization Study on Dogs
• ASTM E1675 : EN-STANDARD PRACTICE FOR SAMPLING TWO-PHASE GEOTHERMAL FLUID FOR PURPOSES OF CHEMICAL ANALYSIS
• ASTM E1675 REV A : EN-Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
• ASTM E1676 : EN-Standard Guide for Conducting Laboratory Soil Toxicity or Bioaccumulation Tests with the Lumbricid Earthworm Eisenia Fetida
• ASTM E1677 : EN-Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
• ASTM E1678 : EN-Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
• ASTM E1678 REV A : EN-Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
• ASTM E1678 REV B : EN-Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
• ASTM E1679 : EN-Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
• ASTM E168 : EN-STANDARD RECOMMENDED PRACTICES FOR GENERAL TECHNIQUES OF INFRARED QUANTITATIVE ANALYSIS (R 1977) (E1-1985)
• ASTM E1680 : EN-Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
• ASTM E1681 : EN-Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
• ASTM E1682 : EN-STANDARD GUIDE FOR MODELING THE COLORIMETRIC PROPERTIES OF A VISUAL DISPLAY UNIT
• ASTM E1682 REV A : EN-STANDARD GUIDE FOR MODELING THE COLORIMETRIC PROPERTIES OF A VISUAL DISPLAY UNIT
• ASTM E1682 REV B : EN-STANDARD GUIDE FOR MODELING THE COLORIMETRIC PROPERTIES OF A VISUAL DISPLAY UNIT
• ASTM E1683 : EN-Standard Practice for Testing the Performance of Scanning Raman Spectrometers
• ASTM E1683 REV A : EN-Standard Practice for Testing the Performance of Scanning Raman Spectrometers
• ASTM E1684 : EN-Standard Specification for Miniature Thermocouple Connectors
• ASTM E1685 : EN-Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
• ASTM E1686 : EN-Standard Guide for Selection of Environmental Noise Measurements and Criteria
• ASTM E1687 : EN-Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
• ASTM E1688 : EN-Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates
• ASTM E1688 REV A : EN-Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates
• ASTM E1689 : EN-Standard Guide for Developing Conceptual Site Models for Contaminated Sites
• ASTM E169 : EN-STANDARD RECOMMENDED PRACTICE FOR GENERAL TECHNIQUES OF ULTRAVIOLET QUANTITATIVE ANALYSIS (R 1981) (E1-1985)
• ASTM E1690 : EN-Standard Test Method for Determination of Ethanol Extractives in Biomass
• ASTM E1691 : EN-Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories
• ASTM E1692 REV A : EN-Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
• ASTM E1693 : EN-Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
• ASTM E1694 REV A : EN-Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
• ASTM E1695 : EN-Standard Test Method for Measurement of Computed Tomography (CT) System Performance
• ASTM E1696 : EN-STANDARD TEST METHOD FOR FIELD MEASUREMENT OF RAISED RETROREFLECTIVE PAVEMENT MARKERS USING A PORTABLE RETROREFLECTOMETER
• ASTM E1696 REV B : EN-Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
• ASTM E1697 : EN-Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
• ASTM E1698 : EN-Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography
• ASTM E1699 : EN-Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
• ASTM E170 : EN-Standard Terminology Relating to Radiation Measurements and Dosimetry
• ASTM E170 REV A : EN-Standard Terminology Relating to Radiation Measurements and Dosimetry
• ASTM E170 REV B : EN-Standard Terminology Relating to Radiation Measurements and Dosimetry
• ASTM E170 REV C : EN-Standard Terminology Relating to Radiation Measurements and Dosimetry
• ASTM E170 REV D : EN-Standard Terminology Relating to Radiation Measurements and Dosimetry
• ASTM E1700 : EN-Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
• ASTM E1701 : EN-Standard Classification for Serviceability of an Office Facility for Manageability
• ASTM E1702 : EN-Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing
• ASTM E1703/E1703M : EN-Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
• ASTM E1704 : EN-Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
• ASTM E1705 : EN-Standard Terminology Relating to Biotechnology
• ASTM E1706 : EN-Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
• ASTM E1706 REV A : EN-STANDARD TEST METHODS FOR MEASURING THE TOXICITY OF SEDIMENT-ASSOCIATED CONTAMINANTS WITH FRESH WATER INVERTEBRATES
• ASTM E1706 REV B : EN-Standard Test Methods for Measuring the Toxicity of Sediment-Associated Contaminants with Fresh Water Invertebrates
• ASTM E1707 : EN-Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing
• ASTM E1708 : EN-Standard Practice for Electronic Interchange of Color and Appearance Data
• ASTM E1709 : EN-Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer-E1: October 2001
• ASTM E171 : EN-STANDARD SPECIFICATION FOR STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING MATERIALS
• ASTM E1710 : EN-Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
• ASTM E1710 REV A : EN-Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
• ASTM E1711 : EN-Standard Guide for Measurement of Behavior During Fish Toxicity Tests
• ASTM E1712 : EN-Standard Specification for Representing Clinical Laboratory Test and Analyte Names
• ASTM E1713 : EN-Standard Specification for Transferring Digital Waveform Data between Independent Computer Systems
• ASTM E1714 : EN-Standard Guide for Properties of a Universal Healthcare Identifier (UHID)
• ASTM E1715 : EN-Standard Practice for an Object-Oriented Model for Registration Admitting Discharge and Transfer (RADT) Functions in Computer-Based Patient Record Systems
• ASTM E1716 : EN-Standard Guide for Selection and Use of Personal Protective Equipment for Humans Working with Respirable Silicon Carbide Whiskers
• ASTM E1717 : EN-Standard Guide for Personnel Training for Health and Safety Aspects of Working in Environments Containing Respirable Silicon Carbide Whiskers
• ASTM E1718 : EN-Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas
• ASTM E1719 : EN-Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
• ASTM E172 : EN-Standard Practice for Describing and Specifying the Excitation Source in Emission Spectrochemical Analysis
• ASTM E1720 : EN-Standard Test Method for Determining Ready Ultimate Biodegradability of Organic Chemicals in a Sealed Vessel CO2 Production Test
• ASTM E1721 : EN-Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
• ASTM E1722 : EN-Standard Practice for Registering and Maintaining Materials and Chemical Property Data Code Lists
• ASTM E1723 : EN-Standard Guide for Recommended Formats for Data Records Used in Computerization of Test Data for Plastics
• ASTM E1724 : EN-Standard Guide for Testing and Certification of Metal Ore and Metal-Related Reference Materials
• ASTM E1725 : EN-Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
• ASTM E1726 : EN-Standard Practice for Sample Digestion of Soils for the Determination of Lead by Atomic Spectrometry
• ASTM E1727 : EN-Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
• ASTM E1728 : EN-Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques-Replaces ES30-94
• ASTM E1729 : EN-Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
• ASTM E173 : EN-STANDARD PRACTICE FOR CONDUCTING INTERLABORATORY STUDIES OF METHODS FOR CHEMICAL ANALYSIS OF METALS
• ASTM E1730 : EN-Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
• ASTM E1731 : EN-Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
• ASTM E1731M : EN-Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves (미터)
• ASTM E1732 : EN-Standard Terminology Relating to Forensic Science
• ASTM E1732 REV A : EN-Standard Terminology Relating to Forensic Science
• ASTM E1733 : EN-Standard Guide for Use of Lighting in Laboratory Testing
• ASTM E1734 : EN-Standard Practice for Radioscopic Examination of Castings
• ASTM E1735 : EN-Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 에 25 MV
• ASTM E1736 : EN-Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
• ASTM E1737 : EN-Standard Test Method for J-Integral Characterization of Fracture Toughness
• ASTM E1738 : EN-Standard Guide for Development of a Directory of Accredited Laboratories by an Accrediting Body
• ASTM E1739 : EN-Standard Guide for Risk-Based Corrective Action Applied at Petroleum Release Sites
• ASTM E1740 : EN-Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
• ASTM E1740 REV A : EN-Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
• ASTM E1741 : EN-Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry-Replaces ES33-94
• ASTM E1742 : EN-Standard Practice for Radiographic Examination
• ASTM E1742 REV A : EN-Standard Practice for Radiographic Examination
• ASTM E1743 : EN-Standard Practice for Selection and Use of Portable Retroreflectometers for the Measurement of Pavement Marking Materials
• ASTM E1744 : EN-Standard Practice for View of Emergency Medical Care in the Electronic Health Record
• ASTM E1745 : EN-Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
• ASTM E1746 : EN-Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities-Replaces E412-93
• ASTM E1747 : EN-Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications
• ASTM E1748 : EN-Standard Test Method for Evaluating the Engagement between Windows and Insect Screens as an Integral System
• ASTM E1749 : EN-Standard Terminology Relating to Rigid Wall Relocatable Shelters
• ASTM E175 : EN-Standard Terminology of Microscopy
• ASTM E1750 : EN-Standard Guide for Use of Water Triple Point Cells
• ASTM E1751 : EN-Standard Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations
• ASTM E1751/E1751M : EN-Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
• ASTM E1752 : EN-Standard Guide for Collection of Multi-Media Field Emission and Discharge Data Associated with Glycol Dehydration Units
• ASTM E1753 : EN-Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
• ASTM E1754 : EN-Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by Infrared Spectrophotometry
• ASTM E1755 : EN-Standard Test Method for Ash in Biomass
• ASTM E1756 : EN-Standard Test Method for Determination of Total Solids in Biomass
• ASTM E1757 : EN-Standard Practice for Preparation of Biomass for Compositional Analysis
• ASTM E1758 : EN-Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
• ASTM E1759 : EN-Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products
• ASTM E176 : EN-STANDARD TERMINOLOGY RELATING TO FIRE STANDARDS
• ASTM E176 REV A : EN-STANDARD TERMINOLOGY RELATING TO FIRE STANDARDS
• ASTM E176 REV B : EN-STANDARD TERMINOLOGY RELATING TO FIRE STANDARDS
• ASTM E176 REV C : EN-Standard Terminology of Fire Standards
• ASTM E176 REV D : EN-STANDARD TERMINOLOGY OF FIRE STANDARDS
• ASTM E1760 : EN-Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
• ASTM E1761 : EN-Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals
• ASTM E1762 : EN-Standard Guide for Electronic Authentication of Health Care Information
• ASTM E1763 : EN-Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
• ASTM E1765 : EN-Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
• ASTM E1766 : EN-Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices
• ASTM E1767 : EN-Standard Practice for Specifying the Geometry of Observations and Measurements to Characterize the Appearance of Materials-(Withdrawn 2004; No Replacement)
• ASTM E1768 : EN-Standard Guide for Ventilatory Behavioral Toxicology Testing of Freshwater Fish
• ASTM E1769 : EN-Standard Guide for Properties of Electronic Health Records and Record Systems
• ASTM E177 : EN-STANDARD RECOMMENDED PRACTICE FOR USE OF THE TERMS PRECISION AND ACCURACY AS APPLIED TO MEASUREMENT OF A PROPERTY OF A MATERIAL (R 1980)
• ASTM E177 REV A : EN-Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
• ASTM E177 REV B : EN-Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
• ASTM E1770 : EN-Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
• ASTM E1771 : EN-Standard Test Method for Determination of Copper in Anode and Blister Copper
• ASTM E1772 : EN-Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
• ASTM E1773 : EN-Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
• ASTM E1774 : EN-Standard Guide for Electromagnetic Acoustic Transducers (EMATs)
• ASTM E1775 : EN-Standard Guide for Evaluating Performance of on-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
• ASTM E1776 : EN-Standard Guide for Development of Fire-Risk-Assessment Standards
• ASTM E1777 : EN-Standard Guide for Prioritization of Data Needs for Pavement Management
• ASTM E1778 : EN-Standard Terminology Relating to Pavement Distress
• ASTM E1778 REV A : EN-Standard Terminology Relating to Pavement Distress
• ASTM E1779 : EN-STANDARD GUIDE FOR PREPARING A MEASUREMENT PLAN FOR CONDUCTING OUTDOOR SOUND MEASUREMENTS
• ASTM E1779 REV A : EN-Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
• ASTM E178 : EN-Standard Practice for Dealing with Outlying Observations
• ASTM E1780 : EN-Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
• ASTM E1781 : EN-Standard Practice for Secondary Calibration of Acoustic Emission Sensors
• ASTM E1782 : EN-Standard Test Method for Determining Vapor Pressure by Thermal Analysis
• ASTM E1783 : EN-Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
• ASTM E1784 : EN-Standard Test Method for Total Peroxides in Acrylonitrile
• ASTM E1785 : EN-Standard Specification for Acrylonitrile
• ASTM E1786 : EN-Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
• ASTM E1787 : EN-Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
• ASTM E1788 : EN-Standard Test Method for Acidity in Acrylonitrile
• ASTM E1789 : EN-Standard Guide for Writing Ink Identification
• ASTM E179 : EN-STANDARD PRACTICE FOR SELECTION OF GEOMETRIC CONDITIONS FOR MEASUREMENT OF REFLECTANCE AND TRANSMITTANCE
• ASTM E179 REV A : EN-Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
• ASTM E1790 : EN-Standard Practice for Near Infrared Qualitative Analysis
• ASTM E1791 : EN-Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
• ASTM E1792 : EN-Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
• ASTM E1792 REV A : EN-Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

| 1 || 2 || 3 |

ASTM A , ASTM B , ASTM C , ASTM D , ASTM E | 1 || 2 || 3 | , ASTM F , ASTM G