ASTM A 0XXX

아래 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집에서 규격번호와 제목을 발췌, 열거한 것입니다.
[출처 : www.astm.org ]

• ASTM A0001-00 : Specification for Carbon Steel Tee Rails

 

• ASTM A0002-02 : Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

 

• ASTM A0003-01 : Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

 

• ASTM A0006/A0006M-04B : Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

 

• ASTM A0020/A0020M-04A : Specification for General Requirements for Steel Plates for Pressure Vessels

 

• ASTM A0021 : Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use

 

• ASTM A0027/A0027M-05 : Specification for Steel Castings, Carbon, for General Application

 

• ASTM A0029/A0029M-04 : Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for

 

• ASTM A0031-04 : Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

 

• ASTM A0034/A0034M-01 : Practice for Sampling and Procurement Testing of Magnetic Materials

 

• ASTM A0036/A0036M-04 : Specification for Carbon Structural Steel

 

• ASTM A0047/A0047M-99R04 : Specification for Ferritic Malleable Iron Castings

 

• ASTM A0048/A0048M-03 : Specification for Gray Iron Castings

 

• ASTM A0049-01 : Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

 

• ASTM A0053/A0053M-04A : Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

 

• ASTM A0065-01 : Specification for Steel Track Spikes

 

• ASTM A0066-01 : Specification for Steel Screw Spikes

 

• ASTM A0067-00 : Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked

 

• ASTM A0074-05 : Specification for Cast Iron Soil Pipe and Fittings

 

• ASTM A0082-02 : Specification for Steel Wire, Plain, for Concrete Reinforcement

 

• ASTM A0090/A0090M-01 : Test Method for Weight \[Mass\] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

 

• ASTM A0099-03 : Specification for Ferromanganese

 

• ASTM A0100-04 : Specification for Ferrosilicon

 

• ASTM A0101-04 : Specification for Ferrochromium

 

• ASTM A0102-04 : Specification for Ferrovanadium

 

• ASTM A0105/A0105M-03 : Specification for Carbon Steel Forgings for Piping Applications

 

• ASTM A0106/A0106M-04B : Specification for Seamless Carbon Steel Pipe for High-Temperature Service

 

• ASTM A0108-03 : Specification for Steel Bar, Carbon and Alloy, Cold-Finished

 

• ASTM A0109/A0109M-03 : Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

 

• ASTM A0111-99AR04E01 : Specification for Zinc-Coated (Galvanized) |P`Iron|P’ Telephone and Telegraph Line Wire

 

• ASTM A0116-00 : Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric

 

• ASTM A0121-99R04 : Specification for Metallic-Coated Carbon Steel Barbed Wire

 

• ASTM A0123/A0123M-02 : Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

 

• ASTM A0125-96R01 : Specification for Steel Springs, Helical, Heat-Treated

 

• ASTM A0126-04 : Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

 

• ASTM A0128/A0128M-93R03 : Specification for Steel Castings, Austenitic Manganese

 

• ASTM A0131/A0131M-04AE01 : Specification for Structural Steel for Ships

 

• ASTM A0132-04 : Specification for Ferromolybdenum

 

• ASTM A0134-96R01 : Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

 

• ASTM A0135-01 : Specification for Electric-Resistance-Welded Steel Pipe

 

• ASTM A0139/A0139M-04 : Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

 

• ASTM A0143/A0143M-03 : Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

 

• ASTM A0144-04 : Specification for Ferrotungsten

 

• ASTM A0146-04 : Specification for Molybdenum Oxide Products

 

• ASTM A0148/A0148M-05 : Specification for Steel Castings, High Strength, for Structural Purposes

 

• ASTM A0153/A0153M-04 : Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

 

• ASTM A0159-83R01 : Specification for Automotive Gray Iron Castings

 

• ASTM A0167-99R04 : Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

 

• ASTM A0176-99R04 : Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip

 

• ASTM A0178/A0178M-02 : Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

 

• ASTM A0179/A0179M-90AR01 : Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

 

• ASTM A0181/A0181M-01 : Specification for Carbon Steel Forgings, for General-Purpose Piping

 

• ASTM A0182/A0182M-04A : Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

 

• ASTM A0183-03 : Specification for Carbon Steel Track Bolts and Nuts

 

• ASTM A0184/A0184M-01 : Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

 

• ASTM A0185-02 : Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

 

• ASTM A0192/A0192M-02 : Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

 

• ASTM A0193/A0193M-04B : Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

 

• ASTM A0194/A0194M-04A : Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

 

• ASTM A0197/A0197M-00 : Specification for Cupola Malleable Iron

 

• ASTM A0202/A0202M : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon

 

• ASTM A0203/A0203M-97R03 : Specification for Pressure Vessel Plates, Alloy Steel, Nickel

 

• ASTM A0204/A0204M-03 : Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

 

• ASTM A0209/A0209M-03 : Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

 

• ASTM A0210/A0210M-02 : Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

 

• ASTM A0213/A0213M-04B : Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

 

• ASTM A0214/A0214M-96R01 : Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

 

• ASTM A0216/A0216M-04 : Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

 

• ASTM A0217/A0217M-04 : Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

 

• ASTM A0220/A0220M-99R04 : Specification for Pearlitic Malleable Iron

 

• ASTM A0225/A0225M-03 : Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

 

• ASTM A0227/A0227M-99R05 : Specification for Steel Wire, Cold-Drawn for Mechanical Springs

 

• ASTM A0228/A0228M-02 : Specification for Steel Wire, Music Spring Quality

 

• ASTM A0229/A0229M-99R05 : Specification for Steel Wire, Oil-Tempered for Mechanical Springs

 

• ASTM A0230/A0230M-05 : Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

 

• ASTM A0231/A0231M-04 : Specification for Chromium-Vanadium Alloy Steel Spring Wire

 

• ASTM A0232/A0232M-05 : Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

 

• ASTM A0234/A0234M-04 : Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

 

• ASTM A0239-95R04 : Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

 

• ASTM A0240/A0240M-05A : Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

 

• ASTM A0242/A0242M-04 : Specification for High-Strength Low-Alloy Structural Steel

 

• ASTM A0247-67R98 : Test Method for Evaluating the Microstructure of Graphite in Iron Castings

 

• ASTM A0249/A0249M-04A : Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

 

• ASTM A0250/A0250M-04 : Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

 

• ASTM A0252-98R02 : Specification for Welded and Seamless Steel Pipe Piles

 

• ASTM A0254-97R02 : Specification for Copper-Brazed Steel Tubing

 

• ASTM A0255-02 : Test Methods for Determining Hardenability of Steel

 

• ASTM A0262-02AE03 : Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

 

• ASTM A0266/A0266M-03A : Specification for Carbon Steel Forgings for Pressure Vessel Components

 

• ASTM A0268/A0268M-04A : Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

 

• ASTM A0269-04 : Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

 

• ASTM A0270-03A : Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

 

• ASTM A0275/A0275M-98R03 : Test Method for Magnetic Particle Examination of Steel Forgings

 

• ASTM A0276-05A : Specification for Stainless Steel Bars and Shapes

 

• ASTM A0278/A0278M-01 : Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650|SDF (350|SDC)

 

• ASTM A0283/A0283M-03 : Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

 

• ASTM A0285/A0285M-03 : Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

 

• ASTM A0288-91R03 : Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

 

• ASTM A0289/A0289M-97R03 : Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

 

• ASTM A0290-02 : Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

 

• ASTM A0291-03 : Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

 

• ASTM A0295-98 : Specification for High-Carbon Anti-Friction Bearing Steel

 

• ASTM A0297/A0297M-97R03 : Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

 

• ASTM A0299/A0299M-04 : Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

 

• ASTM A0302/A0302M-03 : Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

 

• ASTM A0304-04 : Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

 

• ASTM A0307-04 : Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

 

• ASTM A0308/A0308M-03 : Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

 

• ASTM A0309-01 : Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

 

• ASTM A0311/A0311M-04 : Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

 

• ASTM A0312/A0312M-04B : Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

 

• ASTM A0313/A0313M-03 : Specification for Stainless Steel Spring Wire

 

• ASTM A0314-97R02 : Specification for Stainless Steel Billets and Bars for Forging

 

• ASTM A0319-71R01 : Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

 

• ASTM A0320/A0320M-04 : Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service

 

• ASTM A0321-90R01 : Specification for Steel Bars, Carbon, Quenched and Tempered

 

• ASTM A0322-91R01E01 : Specification for Steel Bars, Alloy, Standard Grades

 

• ASTM A0323-05 : Specification for Ferroboron

 

• ASTM A0324-73R04 : Specification for Ferrotitanium

 

• ASTM A0325-04B : Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

 

• ASTM A0325M-04B : Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength \[Metric\]

 

• ASTM A0327-91R97 : Test Methods for Impact Testing of Cast Irons

 

• ASTM A0327M-91R97 : Test Methods for Impact Testing of Cast Irons (Metric)

 

• ASTM A0328/A0328M-03 : Specification for Steel Sheet Piling

 

• ASTM A0331 : Specification for Steel Bars, Alloy, Cold-Finished

 

• ASTM A0333/A0333M-04A : Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

 

• ASTM A0334/A0334M-04A : Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

 

• ASTM A0335/A0335M-03 : Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

 

• ASTM A0336/A0336M-03A : Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

 

• ASTM A0338-84R04 : Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650|SDF (345|SDC)

 

• ASTM A0340-03A : Terminology of Symbols and Definitions Relating to Magnetic Testing

 

• ASTM A0341/A0341M-00 : Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

 

• ASTM A0342/A0342M-04 : Test Methods for Permeability of Feebly Magnetic Materials

 

• ASTM A0343/A0343M-03 : Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

 

• ASTM A0345-04 : Specification for Flat-Rolled Electrical Steels for Magnetic Applications

 

• ASTM A0348/A0348M-00 : Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

 

• ASTM A0350/A0350M-04A : Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

 

• ASTM A0351/A0351M-05 : Specification for Castings, Austenitic, for Pressure-Containing Parts

 

• ASTM A0352/A0352M-03 : Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

 

• ASTM A0353/A0353M-04 : Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered

 

• ASTM A0354-04 : Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

 

• ASTM A0355-89R00 : Specification for Steel Bars, Alloys, for Nitriding

 

• ASTM A0356/A0356M-05 : Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

 

• ASTM A0358/A0358M-04 : Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

 

• ASTM A0363-03 : Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

 

• ASTM A0367-60R05 : Test Methods of Chill Testing of Cast Iron

 

• ASTM A0368-95AR04 : Specification for Stainless Steel Wire Strand

 

• ASTM A0369/A0369M-02 : Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

 

• ASTM A0370-03A : Test Methods and Definitions for Mechanical Testing of Steel Products

 

• ASTM A0370-05 : Test Methods and Definitions for Mechanical Testing of Steel Products

 

• ASTM A0372/A0372M-03 : Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

 

• ASTM A0376/A0376M-04 : Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

 

• ASTM A0377-03 : Index of Specifications for Ductile-Iron Pressure Pipe

 

• ASTM A0380-99R05 : Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

 

• ASTM A0381-96R01 : Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

 

• ASTM A0384/A0384M-02 : Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

 

• ASTM A0385-03 : Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

 

• ASTM A0387/A0387M-03 : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

 

• ASTM A0388/A0388M-03 : Practice for Ultrasonic Examination of Heavy Steel Forgings

 

• ASTM A0389/A0389M-03 : Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

 

• ASTM A0390-95R01 : Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

 

• ASTM A0391/A0391M-01 : Specification for Grade 80 Alloy Steel Chain

 

• ASTM A0392-03 : Specification for Zinc-Coated Steel Chain-Link Fence Fabric

 

• ASTM A0394-04 : Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

 

• ASTM A0395/A0395M-99R04 : Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

 

• ASTM A0400-69R00 : Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

 

• ASTM A0401/A0401M-03 : Specification for Steel Wire, Chromium-Silicon Alloy

 

• ASTM A0403/A0403M-04 : Specification for Wrought Austenitic Stainless Steel Piping Fittings

 

• ASTM A0407-93R04 : Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

 

• ASTM A0409/A0409M-01 : Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

 

• ASTM A0411-03 : Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

 

• ASTM A0413/A0413M-01 : Specification for Carbon Steel Chain

 

• ASTM A0414/A0414M-05 : Specification for Steel, Sheet, Carbon, for Pressure Vessels

 

• ASTM A0416/A0416M-02 : Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

 

• ASTM A0417-93R04 : Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units

 

• ASTM A0418-99R03 : Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

 

• ASTM A0420/A0420M-04 : Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

 

• ASTM A0421/A0421M-02 : Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

 

• ASTM A0423/A0423M-95R04 : Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

 

• ASTM A0424-00 : Specification for Steel, Sheet, for Porcelain Enameling

 

• ASTM A0426/A0426M-02 : Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

 

• ASTM A0426/A0426M-05 : Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

 

• ASTM A0427-02 : Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

 

• ASTM A0428/A0428M-01 : Test Method for Weight \[Mass\] of Coating on Aluminum-Coated Iron or Steel Articles

 

• ASTM A0434-04 : Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

 

• ASTM A0435/A0435M-90R01 : Specification for Straight-Beam Ultrasonic Examination of Steel Plates

 

• ASTM A0436-84R01 : Specification for Austenitic Gray Iron Castings

 

• ASTM A0437/A0437M-04 : Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

 

• ASTM A0438 : Test Method for Transverse Testing of Gray Cast Iron

 

• ASTM A0439-83R04 : Specification for Austenitic Ductile Iron Castings

 

• ASTM A0447/A0447M-93R03 : Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

 

• ASTM A0449-04A : Specification for Quenched and Tempered Steel Bolts and Studs

 

• ASTM A0450/A0450M-04A : Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

 

• ASTM A0451/A0451M-02 : Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

 

• ASTM A0453/A0453M-04 : Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels

 

• ASTM A0455/A0455M-03 : Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

 

• ASTM A0456/A0456M-99R03 : Specification for Magnetic Particle Examination of Large Crankshaft Forgings

 

• ASTM A0459-97R03 : Specification for Zinc-Coated Flat Steel Armoring Tape

 

• ASTM A0460-94R04E01 : Specification for Copper-Clad Steel Wire Strand

 

• ASTM A0463/A0463M-02A : Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

 

• ASTM A0466/A0466M-01 : Specification for Weldless Chain

 

• ASTM A0467/A0467M-01 : Specification for Machine and Coil Chain

 

• ASTM A0469/A0469M-04 : Specification for Vacuum-Treated Steel Forgings for Generator Rotors

 

• ASTM A0470-03 : Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

 

• ASTM A0471-02 : Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

 

• ASTM A0472-98R03 : Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings

 

• ASTM A0473-01 : Specification for Stainless Steel Forgings

 

• ASTM A0474-03 : Specification for Aluminum-Coated Steel Wire Strand

 

• ASTM A0475-03 : Specification for Zinc-Coated Steel Wire Strand

 

• ASTM A0476/A0476M-00 : Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

 

• ASTM A0478-97R02 : Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

 

• ASTM A0479/A0479M-05A : Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

 

• ASTM A0480/A0480M-05 : Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

 

• ASTM A0481-05 : Specification for Chromium Metal

 

• ASTM A0482-05 : Specification for Ferrochrome-Silicon

 

• ASTM A0483-04 : Specification for Silicomanganese

 

• ASTM A0484/A0484M-05A : Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

 

• ASTM A0485-03 : Specification for High Hardenability Antifriction Bearing Steel

 

• ASTM A0487/A0487M-93R03 : Specification for Steel Castings Suitable for Pressure Service

 

• ASTM A0488/A0488M-04 : Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

 

• ASTM A0489-04 : Specification for Carbon Steel Lifting Eyes

 

• ASTM A0490-04A : Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

 

• ASTM A0490M-04A : Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints \[Metric\]

 

• ASTM A0491-03 : Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

 

• ASTM A0492-95R04 : Specification for Stainless Steel Rope Wire

 

• ASTM A0493-95R04 : Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

 

• ASTM A0494/A0494M-05 : Specification for Castings, Nickel and Nickel Alloy

 

• ASTM A0495-94R00 : Specification for Calcium-Silicon Alloys

 

• ASTM A0496-02 : Specification for Steel Wire, Deformed, for Concrete Reinforcement

 

• ASTM A0497/A0497M-02 : Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete

 

• ASTM A0498-04 : Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

 

• ASTM A0499-89R02 : Specification for Steel Bars and Shapes, Carbon Rolled from |P`T|P’ Rails

 

• ASTM A0500-03A : Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

 

• ASTM A0501-01 : Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

 

• ASTM A0502-03 : Specification for Rivets, Steel, Structural

 

• ASTM A0503/A0503M-01R01E01 : Specification for Ultrasonic Examination of Forged Crankshafts

 

• ASTM A0504/A0504M-04E01 : Specification for Wrought Carbon Steel Wheels

 

• ASTM A0505-00R05 : Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

 

• ASTM A0506-04 : Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

 

• ASTM A0507-04 : Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

 

• ASTM A0508/A0508M-04B : Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

 

• ASTM A0510-03 : Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

 

• ASTM A0510M-03 : Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel \[Metric\]

 

• ASTM A0511-04 : Specification for Seamless Stainless Steel Mechanical Tubing

 

• ASTM A0512-96R01 : Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

 

• ASTM A0513-00 : Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

 

• ASTM A0514/A0514M-00A : Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

 

• ASTM A0515/A0515M-03 : Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

 

• ASTM A0516/A0516M-04 : Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

 

• ASTM A0517/A0517M-93R04E01 : Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

 

• ASTM A0518/A0518M-99R03 : Specification for Corrosion-Resistant High-Silicon Iron Castings

 

• ASTM A0519-03 : Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

 

• ASTM A0521-03 : Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

 

• ASTM A0522/A0522M-01 : Specification for Forged or Rolled 8 and 9\% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

 

• ASTM A0523-96R01 : Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

 

• ASTM A0524-96R01 : Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

 

• ASTM A0529/A0529M-04 : Specification for High-Strength Carbon-Manganese Steel of Structural Quality

 

• ASTM A0530/A0530M-04A : Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

 

• ASTM A0531/A0531M-91R01 : Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

 

• ASTM A0532/A0532M-93AR03 : Specification for Abrasion-Resistant Cast Irons

 

• ASTM A0533/A0533M-93R04E01 : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

 

• ASTM A0534-04 : Specification for Carburizing Steels for Anti-Friction Bearings

 

• ASTM A0536-84R04 : Specification for Ductile Iron Castings

 

• ASTM A0537/A0537M-95R00 : Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

 

• ASTM A0539 : Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines

 

• ASTM A0540/A0540M-04 : Specification for Alloy-Steel Bolting Materials for Special Applications

 

• ASTM A0541/A0541M-04 : Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

 

• ASTM A0542/A0542M-99R04E01 : Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

 

• ASTM A0543/A0543M-93R04E01 : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

 

• ASTM A0550-78R00 : Specification for Ferrocolumbium

 

• ASTM A0551-94R99 : Specification for Steel Tires

 

• ASTM A0553/A0553M-95R00 : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

 

• ASTM A0554-03 : Specification for Welded Stainless Steel Mechanical Tubing

 

• ASTM A0555/A0555M-05 : Specification for General Requirements for Stainless Steel Wire and Wire Rods

 

• ASTM A0556/A0556M-96R01 : Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

 

• ASTM A0560/A0560M-05 : Specification for Castings, Chromium-Nickel Alloy

 

• ASTM A0561-71R99 : Practice for Macroetch Testing of Tool Steel Bars

 

• ASTM A0562/A0562M-90R01 : Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

 

• ASTM A0563-04A : Specification for Carbon and Alloy Steel Nuts

 

• ASTM A0563M-04 : Specification for Carbon and Alloy Steel Nuts \[Metric\]

 

• ASTM A0564/A0564M-04 : Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

 

• ASTM A0565/A0565M-05A : Specification for Martensitic Stainless Steel Bars for High-Temperature Service

 

• ASTM A0568/A0568M-05 : Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

 

• ASTM A0571/A0571M-01 : Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

 

• ASTM A0572/A0572M-04 : Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

 

• ASTM A0573/A0573M-00A : Specification for Structural Carbon Steel Plates of Improved Toughness

 

• ASTM A0574-04 : Specification for Alloy Steel Socket-Head Cap Screws

 

• ASTM A0574M-04 : Specification for Alloy Steel Socket-Head Cap Screws \[Metric\]

 

• ASTM A0575-96R02 : Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

 

• ASTM A0576-90BR00 : Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

 

• ASTM A0577/A0577M-90R01 : Specification for Ultrasonic Angle-Beam Examination of Steel Plates

 

• ASTM A0578/A0578M-96R01 : Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications

 

• ASTM A0579-04 : Specification for Superstrength Alloy Steel Forgings

 

• ASTM A0580/A0580M-98R04 : Specification for Stainless Steel Wire

 

• ASTM A0581/A0581M-95BR04 : Specification for Free-Machining Stainless Steel Wire and Wire Rods

 

• ASTM A0582/A0582M-05 : Specification for Free-Machining Stainless Steel Bars

 

• ASTM A0583 : Specification for Cast Steel Wheels for Railway Service

 

• ASTM A0584 : Specification for Aluminum-Coated Steel Woven Wire Fence Fabric

 

• ASTM A0585 : Specification for Aluminum-Coated Steel Barbed Wire

 

• ASTM A0586-04 : Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

 

• ASTM A0587-96R01 : Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

 

• ASTM A0588/A0588M-04 : Specification for High-Strength Low-Alloy Structural Steel with 50 ksi \[345 MPa\] Minimum Yield Point to 4\Nin. \[100\Nmm\] Thick

 

• ASTM A0589-96R01 : Specification for Seamless and Welded Carbon Steel Water-Well Pipe

 

• ASTM A0591/A0591M-98 : Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight \[Mass\] Applications

 

• ASTM A0592/A0592M-04 : Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels

 

• ASTM A0595-04A : Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

 

• ASTM A0596/A0596M-95R04 : Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

 

• ASTM A0597-87R99 : Specification for Cast Tool Steel

 

• ASTM A0598/A0598M-02 : Test Method for Magnetic Properties of Magnetic Amplifier Cores

 

• ASTM A0599/A0599M-02 : Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

 

• ASTM A0600-92AR99 : Specification for Tool Steel High Speed

 

• ASTM A0601-05 : Specification for Electrolytic Manganese Metal

 

• ASTM A0602-94R04 : Specification for Automotive Malleable Iron Castings

 

• ASTM A0603-98R03 : Specification for Zinc-Coated Steel Structural Wire Rope

 

• ASTM A0604-93R03 : Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

 

• ASTM A0606-04 : Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

 

• ASTM A0608/A0608M-02 : Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

 

• ASTM A0609/A0609M-91R02 : Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

 

• ASTM A0610-79R04 : Test Methods for Sampling and Testing Ferroalloys for Determination of Size

 

• ASTM A0612/A0612M-03 : Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

 

• ASTM A0615/A0615M-04B : Specification for Deformed and Plain Carbon Steel Bars for Concrete Reinforcement

 

• ASTM A0618/A0618M-04 : Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

 

• ASTM A0623-03 : Specification for Tin Mill Products, General Requirements

 

• ASTM A0623M-03 : Specification for Tin Mill Products, General Requirements \[Metric\]

 

• ASTM A0624/A0624M-03 : Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

 

• ASTM A0625/A0625M-03 : Specification for Tin Mill Products, Black Plate, Single-Reduced

 

• ASTM A0626/A0626M-03 : Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

 

• ASTM A0627-03 : Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

 

• ASTM A0629 : Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications

 

• ASTM A0630-03 : Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

 

• ASTM A0632-04 : Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

 

• ASTM A0633/A0633M-01 : Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

 

• ASTM A0635/A0635M-05 : Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

 

• ASTM A0636-76R04 : Specification for Nickel Oxide Sinter

 

• ASTM A0638/A0638M-00R04 : Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

 

• ASTM A0640-97R02E01 : Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

 

• ASTM A0641/A0641M-03 : Specification for Zinc\NCoated (Galvanized) Carbon Steel Wire

 

• ASTM A0644-98R03 : Terminology Relating to Iron Castings

 

• ASTM A0645/A0645M-99A : Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

 

• ASTM A0646-95R99 : Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

 

• ASTM A0648-04A : Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe

 

• ASTM A0649/A0649M-99R03 : Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

 

• ASTM A0650/A0650M-03 : Specification for Tin Mill Products, Black Plate, Double Reduced

 

• ASTM A0653/A0653M-04A : Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

 

• ASTM A0656/A0656M-03 : Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

 

• ASTM A0657/A0657M-03 : Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

 

• ASTM A0659/A0659M-97R01 : Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

 

• ASTM A0660-96R01 : Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

 

• ASTM A0662/A0662M-03 : Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

 

• ASTM A0663/A0663M-89R00 : Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

 

• ASTM A0664-99 : Practice for Identification of Standard Electrical Steel Grades in Specifications

 

• ASTM A0666-03 : Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

 

• ASTM A0667/A0667M-87R03 : Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

 

• ASTM A0668/A0668M-04 : Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

 

• ASTM A0671-04 : Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

 

• ASTM A0672-96R01 : Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

 

• ASTM A0673/A0673M-04 : Specification for Sampling Procedure for Impact Testing of Structural Steel

 

• ASTM A0674-00 : Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

 

• ASTM A0675/A0675M-03 : Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

 

• ASTM A0677/A0677M-99 : Specification for Nonoriented Electrical Steel Fully Processed Types

 

• ASTM A0678/A0678M-00A : Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates

 

• ASTM A0679/A0679M-00 : Specification for Steel Wire, High Tensile Strength, Cold Drawn

 

• ASTM A0681-94R99 : Specification for Tool Steels Alloy

 

• ASTM A0682/A0682M-02 : Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For

 

• ASTM A0683/A0683M-99 : Specification for Nonoriented Electrical Steel, Semiprocessed Types

 

• ASTM A0684/A0684M-86R02 : Specification for Steel, Strip, High-Carbon, Cold-Rolled

 

• ASTM A0686-92R99 : Specification for Tool Steel, Carbon

 

• ASTM A0688/A0688M-04 : Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes

 

• ASTM A0689-97R02 : Specification for Carbon and Alloy Steel Bars for Springs

 

• ASTM A0690/A0690M-00A : Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments

 

• ASTM A0691-98R02 : Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

 

• ASTM A0693-03 : Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

 

• ASTM A0694/A0694M-03 : Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

 

• ASTM A0695 : Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications

 

• ASTM A0696-90AR00 : Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

 

• ASTM A0697/A0697M-03 : Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

 

• ASTM A0698/A0698M-02 : Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

 

• ASTM A0700-99E01 : Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment

 

• ASTM A0701-05 : Specification for Ferromanganese-Silicon

 

• ASTM A0702-89R00 : Specification for Steel Fence Posts and Assemblies, Hot Wrought

 

• ASTM A0703/A0703M-05 : Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

 

• ASTM A0704/A0704M-01 : Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

 

• ASTM A0705/A0705M-95R04 : Specification for Age-Hardening Stainless Steel Forgings

 

• ASTM A0706/A0706M-04B : Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

 

• ASTM A0707/A0707M-02 : Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

 

• ASTM A0709/A0709M-04A : Specification for Structural Steel for Bridges

 

• ASTM A0710/A0710M-02 : Specification for Precipitation\NStrengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

 

• ASTM A0711-04 : Specification for Steel Forging Stock

 

• ASTM A0712-97R02 : Test Method for Electrical Resistivity of Soft Magnetic Alloys

 

• ASTM A0713-04 : Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

 

• ASTM A0714-99R03 : Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe

 

• ASTM A0716-03 : Specification for Ductile Iron Culvert Pipe

 

• ASTM A0717/A0717M-01 : Test Method for Surface Insulation Resistivity of Single-Strip Specimens

 

• ASTM A0719/A0719M-02 : Test Method for Lamination Factor of Magnetic Materials

 

• ASTM A0720/A0720M-02 : Test Method for Ductility of Nonoriented Electrical Steel

 

• ASTM A0721/A0721M-02 : Test Method for Ductility of Oriented Electrical Steel

 

• ASTM A0722/A0722M-98R03 : Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

 

• ASTM A0723/A0723M-02 : Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

 

• ASTM A0724/A0724M-04 : Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

 

• ASTM A0726-00 : Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

 

• ASTM A0727/A0727M-02 : Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

 

• ASTM A0729-93R99 : Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

 

• ASTM A0730-93R99 : Specification for Forgings, Carbon and Alloy Steel, for Railway Use

 

• ASTM A0732/A0732M-05 : Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

 

• ASTM A0733-03 : Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

 

• ASTM A0734/A0734M-87AR03 : Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

 

• ASTM A0735/A0735M-03 : Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

 

• ASTM A0736/A0736M-03 : Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel

 

• ASTM A0737/A0737M-99R04 : Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

 

• ASTM A0738/A0738M-03A : Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

 

• ASTM A0739-90AR00 : Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

 

• ASTM A0740-98R03 : Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

 

• ASTM A0741-98R03 : Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail

 

• ASTM A0742/A0742M-03 : Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

 

• ASTM A0743/A0743M-03 : Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

 

• ASTM A0744/A0744M-00R04 : Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

 

• ASTM A0745/A0745M-94R03 : Practice for Ultrasonic Examination of Austenitic Steel Forgings

 

• ASTM A0746-03 : Specification for Ductile Iron Gravity Sewer Pipe

 

• ASTM A0747/A0747M-04 : Specification for Steel Castings, Stainless, Precipitation Hardening

 

• ASTM A0748/A0748M-87R03 : Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

 

• ASTM A0749/A0749M-97R02 : Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

 

• ASTM A0750 : Specification for Steel Air Ventilating Grille Units for Detention Areas

 

• ASTM A0751-01 : Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

 

• ASTM A0752-04 : Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel

 

• ASTM A0752M-04 : Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel \[Metric\]

 

• ASTM A0753-02 : Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

 

• ASTM A0754/A0754M-96R00 : Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

 

• ASTM A0755/A0755M-03 : Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

 

• ASTM A0756-94R01 : Specification for Stainless Anti-Friction Bearing Steel

 

• ASTM A0757/A0757M-00R04 : Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

 

• ASTM A0758/A0758M-00 : Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

 

• ASTM A0759-00 : Specification for Carbon Steel Crane Rails

 

• ASTM A0760/A0760M-01A : Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

 

• ASTM A0761/A0761M-04 : Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

 

• ASTM A0762/A0762M-00 : Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

 

• ASTM A0763-93R04 : Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

 

• ASTM A0764-95R01 : Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

 

• ASTM A0765/A0765M-04 : Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

 

• ASTM A0767/A0767M-00B : Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

 

• ASTM A0768-95R01 : Specification for Vacuum-Treated 12 \% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

 

• ASTM A0769/A0769M-00 : Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes

 

• ASTM A0770/A0770M-03 : Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

 

• ASTM A0771/A0771M : Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components

 

• ASTM A0772/A0772M-00 : Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current

 

• ASTM A0773/A0773M-01 : Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs

 

• ASTM A0774/A0774M-02 : Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

 

• ASTM A0775/A0775M-04A : Specification for Epoxy-Coated Steel Reinforcing Bars

 

• ASTM A0778-01 : Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

 

• ASTM A0779/A0779M-00 : Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete

 

• ASTM A0780-01 : Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

 

• ASTM A0781/A0781M-05A : Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

 

• ASTM A0782/A0782M-90R01 : Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel

 

• ASTM A0786/A0786M-00B : Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

 

• ASTM A0787-01 : Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

 

• ASTM A0788-04A : Specification for Steel Forgings, General Requirements

 

• ASTM A0789/A0789M-04A : Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

 

• ASTM A0790/A0790M-04A : Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

 

• ASTM A0792/A0792M-03 : Specification for Steel Sheet, 55 \% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

 

• ASTM A0793-96R01 : Specification for Rolled Floor Plate, Stainless Steel

 

• ASTM A0794-97R02 : Specification for Commercial Steel (CS), Sheet, Carbon (0.16 \% Maximum to 0.25 \% Maximum), Cold-Rolled

 

• ASTM A0795/A0795M-04 : Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

 

• ASTM A0796/A0796M-04 : Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

 

• ASTM A0798/A0798M-01 : Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

 

• ASTM A0799/A0799M-04 : Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

 

• ASTM A0800/A0800M-01 : Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

 

• ASTM A0801-04 : Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

 

• ASTM A0802/A0802M-95R01 : Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

 

• ASTM A0803/A0803M-03 : Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

 

• ASTM A0804/A0804M-04 : Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

 

• ASTM A0805-93R02 : Specification for Steel, Flat Wire, Carbon, Cold-Rolled

 

• ASTM A0807/A0807M-02E01 : Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

 

• ASTM A0808/A0808M-00A : Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness

 

• ASTM A0809-03 : Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

 

• ASTM A0810-01 : Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

 

• ASTM A0811-03 : Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques

 

• ASTM A0813/A0813M-01 : Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

 

• ASTM A0814/A0814M-03 : Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

 

• ASTM A0815/A0815M-04 : Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

 

• ASTM A0817-03 : Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

 

• ASTM A0818-91R01 : Specification for Coppered Carbon Steel Wire

 

• ASTM A0820/A0820M-04 : Specification for Steel Fibers for Fiber-Reinforced Concrete

 

• ASTM A0821/A0821M-99 : Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks

 

• ASTM A0822/A0822M-04 : Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

 

• ASTM A0823-99R03 : Specification for Statically Cast Permanent Mold Gray Iron Castings

 

• ASTM A0824-01 : Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

 

• ASTM A0826/A0826M : Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components

 

• ASTM A0827/A0827M-02 : Specification for Plates, Carbon Steel, for Forging and Similar Applications

 

• ASTM A0829/A0829M-04 : Specification for Alloy Structural Steel Plates

 

• ASTM A0830/A0830M-02 : Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

 

• ASTM A0831/A0831M : Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components

 

• ASTM A0832/A0832M-99R04E01 : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

 

• ASTM A0833-84R01 : Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

 

• ASTM A0834-95R01 : Specification for Common Requirements for Iron Castings for General Industrial Use

 

• ASTM A0835-84R00 : Specification for Sizes of Ferroalloys and Alloy Additives

 

• ASTM A0836/A0836M-02 : Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

 

• ASTM A0837/A0837M-03 : Specification for Steel Forgings, Alloy, for Carburizing Applications

 

• ASTM A0838-02 : Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

 

• ASTM A0839-02 : Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

 

• ASTM A0840/A0840M-00 : Specification for Fully Processed Magnetic Lamination Steel

 

• ASTM A0841/A0841M-03A : Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

 

• ASTM A0842-85R04 : Specification for Compacted Graphite Iron Castings

 

• ASTM A0844/A0844M-04 : Specification for Steel Plates, 9 \% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

 

• ASTM A0845 : Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel

 

• ASTM A0846 : Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel

 

• ASTM A0847-99AR03 : Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

 

• ASTM A0848-01 : Specification for Low-Carbon Magnetic Iron

 

• ASTM A0849-00 : Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

 

• ASTM A0851 : Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes

 

• ASTM A0852/A0852M-03 : Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi \[485 MPa\] Minimum Yield Strength to 4 in. \[100 mm\] Thick

 

• ASTM A0853-04 : Specification for Steel Wire, Carbon, for General Use

 

• ASTM A0854/A0854M-98R03 : Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

 

• ASTM A0855/A0855M-03 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

 

• ASTM A0856/A0856M-03 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

 

• ASTM A0857/A0857M-00A : Specification for Steel Sheet Piling, Cold Formed, Light Gage

 

• ASTM A0858/A0858M-00 : Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

 

• ASTM A0859/A0859M-04 : Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

 

• ASTM A0860/A0860M-00 : Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings

 

• ASTM A0861-04 : Specification for High-Silicon Iron Pipe and Fittings

 

• ASTM A0862/A0862M-98R03 : Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

 

• ASTM A0865-03 : Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

 

• ASTM A0866-01 : Specification for Medium Carbon Anti-Friction Bearing Steel

 

• ASTM A0867-03 : Specification for Iron-Silicon Relay Steels

 

• ASTM A0871/A0871M-03 : Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

 

• ASTM A0872/A0872M-04 : Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

 

• ASTM A0872/A0872M-05 : Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

 

• ASTM A0874/A0874M-98R04 : Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

 

• ASTM A0875/A0875M-02A : Specification for Steel Sheet, Zinc-5 \% Aluminum Alloy-Coated by the Hot-Dip Process

 

• ASTM A0876-03 : Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

 

• ASTM A0877/A0877M-05 : Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality

 

• ASTM A0878/A0878M-05 : Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

 

• ASTM A0879-00 : Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

 

• ASTM A0880 : Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys

 

• ASTM A0881/A0881M-02 : Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties

 

• ASTM A0882/A0882M-04A : Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

 

• ASTM A0883/A0883M-01 : Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials

 

• ASTM A0884/A0884M-04 : Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

 

• ASTM A0885/A0885M-96R02 : Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe

 

• ASTM A0886/A0886M-02 : Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

 

• ASTM A0887-89R04 : Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

 

• ASTM A0888-05 : Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

 

• ASTM A0889/A0889M-03 : Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

 

• ASTM A0890/A0890M-99R03 : Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

 

• ASTM A0891-98R03 : Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

 

• ASTM A0892-88R01 : Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

 

• ASTM A0893/A0893M-03 : Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

 

• ASTM A0894/A0894M-00 : Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

 

• ASTM A0895-89R04 : Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

 

• ASTM A0896-89R04 : Practice for Conducting Case Studies on Galvanized Structures

 

• ASTM A0897/A0897M-03 : Specification for Austempered Ductile Iron Castings

 

• ASTM A0898/A0898M-91R01 : Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

 

• ASTM A0899-91R02 : Specification for Steel Wire, Epoxy-Coated

 

• ASTM A0900/A0900M-01 : Test Method for Lamination Factor of Amorphous Magnetic Strip

 

• ASTM A0901-03 : Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

 

• ASTM A0902-03 : Terminology Relating to Metallic Coated Steel Products

 

• ASTM A0903/A0903M-99R03 : Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

 

• ASTM A0904-04 : Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts

 

• ASTM A0905-04 : Specification for Steel Wire, Pressure Vessel Winding

 

• ASTM A0906/A0906M-02 : Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

 

• ASTM A0908-03 : Specification for Stainless Steel Needle Tubing

 

• ASTM A0909-03 : Specification for Steel Forgings, Microalloy, for General Industrial Use

 

• ASTM A0910/A0910M-99 : Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete

 

• ASTM A0911/A0911M-02 : Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Railroad Ties

 

• ASTM A0912/A0912M-04 : Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

 

• ASTM A0913/A0913M-04 : Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

 

• ASTM A0914/A0914M-92R99E01 : Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

 

• ASTM A0915/A0915M-93R03 : Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

 

• ASTM A0917-00 : Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

 

• ASTM A0918-00 : Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

 

• ASTM A0920/A0920M-02A : Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

 

• ASTM A0921/A0921M-93R99 : Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

 

• ASTM A0922-05 : Specification for Silicon Metal

 

• ASTM A0923-03 : Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

 

• ASTM A0924/A0924M-04 : Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

 

• ASTM A0925-03 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

 

• ASTM A0926-03 : Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

 

• ASTM A0927/A0927M-04 : Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

 

• ASTM A0928/A0928M-04 : Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

 

• ASTM A0929/A0929M-01 : Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

 

• ASTM A0930-03 : Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

 

• ASTM A0931-96R02 : Test Method for Tension Testing of Wire Ropes and Strand

 

• ASTM A0932/A0932M-01 : Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

 

• ASTM A0933/A0933M-95R01 : Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement

 

• ASTM A0934/A0934M-04 : Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

 

• ASTM A0937/A0937M-01 : Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

 

• ASTM A0938-04 : Test Method for Torsion Testing of Wire

 

• ASTM A0939-96R01 : Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

 

• ASTM A0940-96R01 : Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

 

• ASTM A0941-04A : Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

 

• ASTM A0942-95R01 : Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

 

• ASTM A0943/A0943M-01 : Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

 

• ASTM A0944-99R04 : Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

 

• ASTM A0945/A0945M-00 : Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

 

• ASTM A0946-95R04 : Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service

 

• ASTM A0947M-95R04 : Specification for Textured Stainless Steel Sheet \[Metric\]

 

• ASTM A0949/A0949M-01 : Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

 

• ASTM A0950/A0950M-99R03 : Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

 

• ASTM A0951-02 : Specification for Masonry Joint Reinforcement

 

• ASTM A0952/A0952M-02 : Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

 

• ASTM A0953-02 : Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing

 

• ASTM A0954-02 : Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe

 

• ASTM A0955/A0955M-04AE01 : Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

 

• ASTM A0956-02 : Test Method for Leeb Hardness Testing of Steel Products

 

• ASTM A0957-05 : Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

 

• ASTM A0958-00 : Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

 

• ASTM A0959-04 : Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

 

• ASTM A0960/A0960M-04A : Specification for Common Requirements for Wrought Steel Piping Fittings

 

• ASTM A0961/A0961M-04A : Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

 

• ASTM A0962/A0962M-04 : Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range

 

• ASTM A0964/A0964M-03 : Specification for Corrugated Steel Box Culverts

 

• ASTM A0965/A0965M-02E01 : Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

 

• ASTM A0966/A0966M-96R01 : Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

 

• ASTM A0967-05 : Specification for Chemical Passivation Treatments for Stainless Steel Parts

 

• ASTM A0968/A0968M-96R01 : Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service

 

• ASTM A0970/A0970M-04AE01 : Specification for Headed Steel Bars for Concrete Reinforcement

 

• ASTM A0971-00 : Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

 

• ASTM A0972/A0972M-00R04 : Specification for Fusion Bonded Epoxy-Coated Pipe Piles

 

• ASTM A0973/A0973M-01 : Specification for Grade 100 Alloy Steel Chain

 

• ASTM A0974-97R03 : Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)

 

• ASTM A0975-97R03 : Specification for Double\NTwisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic\NCoated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

 

• ASTM A0976-03 : Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application

 

• ASTM A0977/A0977M-02 : Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs

 

• ASTM A0978/A0978M-97R02E01 : Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

 

• ASTM A0979/A0979M-03 : Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

 

• ASTM A0980-97R03 : Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

 

• ASTM A0981-97R02 : Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors

 

• ASTM A0982-02 : Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

 

• ASTM A0983/A0983M-04 : Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

 

• ASTM A0984/A0984M-03 : Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded

 

• ASTM A0985/A0985M-04A : Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

 

• ASTM A0986/A0986M-01 : Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

 

• ASTM A0987-00 : Test Method for Measuring Shape Characteristics of Tin Mill Products

 

• ASTM A0988/A0988M-98R02E01 : Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

 

• ASTM A0989/A0989M-98R02E01 : Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

 

• ASTM A0990-05 : Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

 

• ASTM A0991-98R04 : Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

 

• ASTM A0992/A0992M-04A : Specification for Structural Steel Shapes

 

• ASTM A0993 : Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature

 

• ASTM A0994-03 : Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

 

• ASTM A0995/A0995M-98R03 : Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

 

• ASTM A0996/A0996M-04 : Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

 

• ASTM A0997-98R03 : Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

 

• ASTM A0998/A0998M-98R03 : Practice for Structural Design of Reinforcements for Fittings in Factory\NMade Corrugated Steel Pipe for Sewers and Other Applications

 

• ASTM A0999/A0999M-04A : Specification for General Requirements for Alloy and Stainless Steel Pipe

 

• ASTM A10 : Withdrawn 1970 : Specification for Mild Steel Plates

 

• ASTM A100 : Specification for Ferrosilicon

 

• ASTM A1000 : Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

 

• ASTM A1000-05 : Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

 

• ASTM A1001 : Specification for High Strength Steel Castings in Heavy Sections

 

• ASTM A1001-01 : Specification for High Strength Steel Castings in Heavy Sections

 

• ASTM A1002 : Specification for Castings, Nickel Aluminum Ordered Alloy

 

• ASTM A1002-99R03 : Specification for Castings, Nickel-Aluminum Ordered Alloy

 

• ASTM A1003/A1003M : Specification for Steel Sheet, Carbon, Metallic and Nonmetallic Coated for Cold FormedFraming Members

 

• ASTM A1003/A1003M-02A : Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

 

• ASTM A1004/A1004M : Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics ofMetallic, Painted Metallic, and Nonmetallic Coated Steel Sheet Intended for Use as Cold FormedFraming Members

 

• ASTM A1004/A1004M-99R04 : Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing

 

• ASTM A1005/A1005M : Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, DoubleSubmerged Arc Welded

 

• ASTM A1005/A1005M-00R04 : Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded

 

• ASTM A1006/A1006M : Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

 

• ASTM A1006/A1006M-00R04 : Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded

 

• ASTM A1007 : Specification for Carbon Steel Wire for Wire Rope

 

• ASTM A1007-02 : Specification for Carbon Steel Wire for Wire Rope

 

• ASTM A1008/A1008M : Specification for Steel, Sheet, Cold Rolled, Carbon, Structural, High Strength Low Alloy, High-Strength Low Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

 

• ASTM A1008/A1008M-05A : Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

 

• ASTM A1009 : Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz 1MHz) Power Transformer and Filter Inductor Applications

 

• ASTM A1009-00 : Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications

 

• ASTM A101 : Specification for Ferrochromium

 

• ASTM A1010/A1010M : Specification for Higher Strength Martensitic Stainless Steel Plate, Sheet , and Strip

 

• ASTM A1010/A1010M-01E01 : Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

 

• ASTM A1011/A1011M : Specification for Steel, Sheet and Strip, Hot Rolled, Carbon, Structural, High Strength LowAlloy and High Strength Low Alloy with Improved Formability

 

• ASTM A1011/A1011M-05 : Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

 

• ASTM A1012 : Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenserand Heat Exchanger Tubes With Integral Fins

 

• ASTM A1012-02 : Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

 

• ASTM A1013 : Test Method for High Frequency (10 kHz 1 MHz) Core Loss of Soft Magnetic CoreComponents at Controlled Temperatures Using the Voltmeter Ammeter Wattmeter Method

 

• ASTM A1013-00 : Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

 

• ASTM A1014 : Specification for Precipitation Hardening Bolting Material (UNS N07718) for HighTemperature Service

 

• ASTM A1014-03 : Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service

 

• ASTM A1015 : Guide for Videoborescoping of Tubular Products for Sanitary Applications

 

• ASTM A1015-01 : Guide for Videoborescoping of Tubular Products for Sanitary Applications

 

• ASTM A1016/A1016M : Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, andStainless Steel Tubes

 

• ASTM A1016/A1016M-04A : Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

 

• ASTM A1017/A1017M : Specification for Pressure Vessel Plates, Alloy Steel, Chromium Molybdenum Tungsten

 

• ASTM A1017/A1017M-01 : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

 

• ASTM A1018/A1018M : Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon,

 

• ASTM A1018/A1018M-05A : Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability

 

• ASTM A1018A1018M : Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled,Carbon,

 

• ASTM A1019/A1019M : Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, PolymerPrecoated for Sewers and Drains

 

• ASTM A1019/A1019M-01 : Specification for Closed Rib Steel Pipe with Diameter of 36 in. \[900 mm\] or Less, Polymer Precoated for Sewers and Drains

 

• ASTM A102 : Specification for Ferrovanadium

 

• ASTM A1020/A1020M : Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler,

 

• ASTM A1020/A1020M-02 : Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications

 

• ASTM A1021/A1021M : Specification for Martensitic Stainless Steel Forgings and Forging Stock for HighTemperature Service

 

• ASTM A1021-02 : Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

 

• ASTM A1022 : Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for ConcreteReinforcement

 

• ASTM A1022-01 : Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

 

• ASTM A1023/A1023M : Specification for Stranded Carbon Steel Wire Ropes for General Purposes

 

• ASTM A1023/A1023M-02 : Specification for Stranded Carbon Steel Wire Ropes for General Purposes

 

• ASTM A1024/A1024M : Specification for Steel Line Pipe, Black, Plain End, Seamless

 

• ASTM A1024/A1024M-02 : Specification for Steel Line Pipe, Black, Plain-End, Seamless

 

• ASTM A1025 : Specification for Ferroalloys, General Requirements

 

• ASTM A1025-05 : Specification for Ferroalloys and Other Alloying Materials, General Requirements

 

• ASTM A1026 : Specification for Alloy Steel Structural Shapes for Use in Building Framing

 

• ASTM A1026-03 : Specification for Alloy Steel Structural Shapes for Use in Building Framing

 

• ASTM A1028 : Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

 

• ASTM A1028-03 : Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

 

• ASTM A1030/A1030M : Practice for Measuring Flatness Characteristics of Steel Sheet Products

 

• ASTM A1030/A1030M-03 : Practice for Measuring Flatness Characteristics of Coated Sheet Products

 

• ASTM A1031 : Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Alloy, Drawing Steel andStructural Steel, Hot Rolled

 

• ASTM A1031-04 : Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

 

• ASTM A1032 : Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used forPrestressing Concrete Pipe

 

• ASTM A1032-04 : Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

 

• ASTM A103-27 : Methods of Sampling Ferro-Alloys (Withdrawn March 1939)

 

• ASTM A1033 : Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and LowAlloy Steel Phase Transformations

 

• ASTM A1033-04 : Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

 

• ASTM A1034/A1034M : Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

 

• ASTM A1034/A1034M-04 : Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

 

• ASTM A1035/A1035M : Specification for Deformed and Plain, Low carbon, Chromium, Steel Bars for ConcreteReinforcement

 

• ASTM A1035/A1035M-04E01 : Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement

 

• ASTM A1036 : Guide for Measuring Power Frequency Magnetic Properties of Flat Rolled Electrical SteelsUsing Small Single Sheet Testers

 

• ASTM A1036-04 : Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers

 

• ASTM A1037/A1037M : Specification for Steel Line Pipe, Black, Furnace butt Welded

 

• ASTM A1038 : Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

 

• ASTM A1039/A1039M : Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced bythe Twin Roll Casting Process

 

• ASTM A1039/A1039M-04 : Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial and Structural, Produced by the Twin-Roll Casting Process

 

• ASTM A104 : Withdrawn 1939 : Methods of Chemical Analysis of Ferro-Alloys

 

• ASTM A1040 : Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, LowAlloy, and Alloy Steels

 

• ASTM A1041/A1041M : Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium MolybdenumTungsten

 

• ASTM A1041/A1041M-04 : Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten

 

• ASTM A1042/A1042M : Specification for Composite Corrugated Steel Pipe for Sewers and Drains

 

• ASTM A1043/A1043M : Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

 

• ASTM A1044/A1044M : Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

 

• ASTM A1045 : Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of WaterClosets to Sanitary Drainage System

 

• ASTM A1045-05 : Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System

 

• ASTM A106/A106M : Specification for Seamless Carbon Steel Pipe for High Temperature Service

 

• ASTM A1066A1066M : Specification for High-Strength Low-Alloy Structural Steel Plate Produced byThermo-

 

• ASTM A107 : Withdrawn 1968 : Specification for Hot-Rolled Carbon Steel Bars

 

• ASTM A108 : Specification for Steel Bar, Carbon and Alloy, Cold Finished

 

• ASTM A1083A1083M : Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy,

 

• ASTM A109M-91 : Specification for Steel, Strip, Carbon, Cold-Rolled [Metric] (Withdrawn 1998)

 

• ASTM A11 : Withdrawn 1930 : Specification for Structural Steel for Cars

 

• ASTM A110 : Withdrawn 1936 : Test Method for Weight of Coating on Zinc-Coated (Galvanized) Iron or Steel Articles

 

• ASTM A111 : Specification for Zinc Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire

 

• ASTM A112 : Withdrawn 1990 : Specification for Zinc-Coated (Galvanized) Steel Tie wires

 

• ASTM A113 : Withdrawn 1979 : Specification for Structural Steel for Locomotives and Cars

 

• ASTM A114 : Withdrawn 1940 : Specification for Marine Boiler Steel Plates

 

• ASTM A115 : Withdrawn 1937 : Specification for Alloy Tool Steel

 

• ASTM A116 : Specification for Metallic Coated, Steel Woven Wire Fence Fabric

 

• ASTM A117 : Withdrawn 1956 : Specification for Zinc-Coated Iron or Steel Chain-Link Fence Fabric Galvanized After Wearing

 

• ASTM A118 : Withdrawn 1933 : Specification for Zinc-Coated Iron or Steel Chain-Link Fence Fabric Galvanized Before Wearing

 

• ASTM A119-33 : Definitions of Terms Relating to Heat Treatment Metals (Withdrawn 1942)

 

• ASTM A12 : Withdrawn 1934 : Specification for Structural Steel for Ships

 

• ASTM A120-84 : Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless for Ordinary Uses (Withdrawn 1987)

 

• ASTM A121 : Specification for Mettalic Coated Carbon Steel Barbed Wire

 

• ASTM A122 : Withdrawn 1963 : Specification for Zinc-Coated Steel Wire Strand (Galvanized) and Class A Extra Galvanized

 

• ASTM A123/A123M : Specification for Zinc (Hot Dip Galvanized) Coatings on Iron and Steel Products

 

• ASTM A124 : Withdrawn 1940 : Specification for Arbitration Test Bar and Tension Test Specimen for Cast Iron

 

• ASTM A125 : Specification for Steel Springs, Helical, Heat Treated

 

• ASTM A126 : Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

 

• ASTM A128/A128M : Specification for Steel Castings, Austenitic Manganese

 

• ASTM A129 : Withdrawn 1969 : Specification for Open-Hearth Iron Plates for Pressure Vessels

 

• ASTM A13- : Specification for Rivet Steel for Ships (Withdrawn 1934)

 

• ASTM A130 : Withdrawn 1937 : Methods for Chemical Analysis of Steel Cast Iron, Open-Hearth Iron, and Wrought Iron

 

• ASTM A131/A131M : Specification for Structural Steel for Ships

 

• ASTM A132 : Specification for Ferromolybdenum

 

• ASTM A133 : Withdrawn 1941 : Specification for Alloy-Steel Forgings for Locomotives and Cars

 

• ASTM A134 : Specification for Pipe, Steel, Electric Fusion (Arc) Welded (Sizes NPS 16 and Over)

 

• ASTM A135 : Specification for Electric Resistance Welded Steel Pipe

 

• ASTM A136 : Withdrawn 1945 : Specification for Forge-Welded Steel Pipe

 

• ASTM A137 : Withdrawn 1943 : Specification for Lock-Bar Steel Pipe

 

• ASTM A138 : Withdrawn 1945 : Specification for Riveted Steel and Wrought-Iron Pipe

 

• ASTM A139/A139M : Specification for Electric Fusion (Arc) Welded Steel Pipe (NPS 4 and Over)

 

• ASTM A14 : Withdrawn 1950 : Specification for Carbon-Steel Bars for Springs

 

• ASTM A140 : Withdrawn 1935 : Specification for Steel for Bridges and Buildings

 

• ASTM A141 : Withdrawn 1967 : Specification for Structural Rivet Steel

 

• ASTM A142 : Withdrawn 1977 : Specification for Cast Iron Culvert Pipe

 

• ASTM A143/A143M : Practice for Safeguarding Against Embrittlement of Hot Dip Galvanized Structural SteelProducts and Procedure for Detecting Embrittlement

 

• ASTM A144 : Specification for Ferrotungsten

 

• ASTM A145 : Withdrawn 1940 : Specification for Low-Carbon Ferromolybdenum

 

• ASTM A146 : Specification for Molybdenum Oxide Products

 

• ASTM A147 : Withdrawn 1984 : Specification for Heat-Treated Steel Leaf Springs

 

• ASTM A148/A148M : Specification for Steel Castings, High Strength, for Structural Purposes

 

• ASTM A149 : Withdrawn 1940 : Specification for High Tensile Strength Carbon-Steel Plates for Boilers and Other Pressure Vessel Plates (2 in.)

 

• ASTM A15 : Withdrawn 1969 : Specification for Billet-Steel Bars for Concrete Reinforcement

 

• ASTM A150 : Withdrawn 1940 : Specification for High Tensile Strength Carbon-Silicon Steel Plates for Boilers and Other Pressure Vessel

 

• ASTM A151 : Withdrawn 1938 : Specification for Steel Suitable for Fusion Welding

 

• ASTM A152 : Withdrawn 1972 : Specification for Wrought Iron Rivets and Rivet Rounds

 

• ASTM A153/A153M : Specification for Zinc Coating (Hot Dip) on Iron and Steel Hardware

 

• ASTM A154 : Withdrawn 1936 : Specification for Mild-to-Medium-Strength Carbon-Steel Castings for General Application

 

• ASTM A155 : Withdrawn 1978 : Specification for Electric-Fusion Welded Steel Pipe for High-Pressure Service

 

• ASTM A156 : Withdrawn 1936 : Specification for Molybdenum Salts and Compounds

 

• ASTM A157 : Withdrawn 1953 : Specification for Alloy-Steel Castings for Pressure Containing Parts Suitable for High-Temperature Service

 

• ASTM A158 : Withdrawn 1953 : Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

 

• ASTM A159 : Specification for Automotive Gray Iron Castings

 

• ASTM A16 : Withdrawn 1969 : Specification for Rail-Steel Bars of Concrete Reinforcement

 

• ASTM A160 : Withdrawn 1969 : Specification for Axle-Steel Bars for Concrete Reinforcement

 

• ASTM A162 : Withdrawn 1973 : Specification for Uncoated Wrought Iron Sheets

 

• ASTM A163 : Withdrawn 1972 : Specification for Zinc-Coated (Galvanized) Wrought Iron Sheets

 

• ASTM A164 : Withdrawn 1981 : Specification for Electrodeposited Coatings of Zinc on Steel

 

• ASTM A165 : Withdrawn 1988 : Specification for Electrodeposited Coatings of Cadmium on Steel

 

• ASTM A166 : Withdrawn 1968 : Specification for Electrodeposited Coatings of Nickel and Chromium on Steel

 

• ASTM A167 : Specification for Stainless and Heat Resisting Chromium Nickel Steel Plate, Sheet, and Strip

 

• ASTM A168 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A169 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A17 : Withdrawn 1945 : Specification for Carbon-Steel and Alloy-Steel Blooms, Billets and Slabs and Forms

 

• ASTM A170 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A171 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A173 : Withdrawn 1954 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A174 : Withdrawn 1940 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A175 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A176 : Specification for Stainless and Heat Resisting Chromium Steel Plate, Sheet, and Strip

 

• ASTM A177 : Withdrawn 1989 : Specification for High-Strength Stainless and Chromium-Nickel Steel Sheet and Strip

 

• ASTM A178/A178M : Specification for Electric Resistance Welded Carbon Steel and Carbon Manganese SteelBoiler and Superheater Tubes

 

• ASTM A179/A179M : Specification for Seamless Cold Drawn Low Carbon Steel Heat Exchanger and CondenserTubes

 

• ASTM A18 : Withdrawn 1940 : Specification for Quenched-and-Tempered Carbon-Steel Axles, Shafts, and Other Forgings for Locomotives and Cars

 

• ASTM A180 : Withdrawn 1937 : Specification for Mild-to-Medium-Strength Carbon-Steel Castings for General Application

 

• ASTM A181/A181M : Specification for Carbon Steel Forgings, for General Purpose Piping

 

• ASTM A182/A182M : Specification for Forged or Rolled Alloy Steel Pipe Flanges, Forged Fittings, and Valves andParts for High Temperature Service

 

• ASTM A183 : Specification for Carbon Steel Track Bolts and Nuts

 

• ASTM A184/A184M : Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement

 

• ASTM A185/A185M : Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

 

• ASTM A186 : Withdrawn 1966 : Specification for One-Wear Wrought Steel Wheels

 

• ASTM A187 : Withdrawn 1943 : Specification for Seamless Cold-Drawn Alloy-Steel (4 to 6 Percent Chromium) Heat Exchanger and Condenser Tubes

 

• ASTM A188 : Withdrawn 1943 : Specification for Seamless Alloy-Steel (4 to 6 Percent Chromium) Still tubes for refinery service

 

• ASTM A189 : Withdrawn 1972 : Specification for Single and Double Refined Wrought Iron Bars

 

• ASTM A190 : Withdrawn 1962 : Specification for Lght Weight and Thin-Sectioned Gray Iron Castings

 

• ASTM A191 : Withdrawn 1942 : Test Method for Uniformity of CoatIng by the Preece Test (Copper Sulfate Dip) on Zinc-Coated (Galvanized) Iron or Steel Articles

 

• ASTM A192/A192M : Specification for Seamless Carbon Steel Boiler Tubes for High Pressure Service

 

• ASTM A193/A193M : Specification for Alloy Steel and Stainless Steel Bolting Materials for High TemperatureService

 

• ASTM A19-36 : Specification for Quenched-and-Tempered Carbon-Steel Axles, Shafts, and Other Forgings for Locomotives and Cars (Withdrawn 1936)

 

• ASTM A194/A194M : Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or HighTemperature Service, or Both

 

• ASTM A195-59 : Specification for High-Strength Structural Rivet Steel (Withdrawn 1966)

 

• ASTM A196 : Withdrawn 1962 : Guidelines for Cast Iron

 

• ASTM A197/A197M : Specification for Cupola Malleable Iron

 

• ASTM A197M-87(1992) : Specification for Cupola Malleable Iron [Metric] (Withdrawn 1999)

 

• ASTM A198 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A199/A199M-92 : Specification for Seamless Cold-Drawn Intermediate Alloy-Steel Heat-Exchanger and Condenser Tubes (Withdrawn 1995)

 

• ASTM A2 : Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

 

• ASTM A20/A20M : Specification for General Requirements for Steel Plates for Pressure Vessels

 

• ASTM A200-94 : Specification for Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service (Withdrawn 1999)

 

• ASTM A201 : Withdrawn 1967 : Specification for Carbon-Silicon Steel Plates of Intermediate Tensile Ranges for Fusion-Welded Boilers and Other Pressure Vessels

 

• ASTM A202/A202M : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon(Withdrawn 2004) No Replacement

 

• ASTM A202/A202M-03 : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon (Withdrawn 2004)

 

• ASTM A203/A203M : Specification for Pressure Vessel Plates, Alloy Steel, Nickel

 

• ASTM A204/A204M : Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

 

• ASTM A205 : Withdrawn 1967 : Specification for Iron and Steel Filler Metal (Arc-Welding Electrodes and Gas-Welding Rods)

 

• ASTM A206 : Withdrawn 1953 : Specification for Seamless Ferritic Alloy-Steel Pipe for HIgh-Temperature Service

 

• ASTM A207 : Withdrawn 1972 : Specification for Rolled Wrought Iron Shapes and Bars

 

• ASTM A208 : Withdrawn 1941 : Method of Test for Uniformity of Coating by the Preece Test (Copper Sulfate Dip) on Zinc or Steel Articles

 

• ASTM A209/A209M : Specification for Seamless Carbon Molybdenum Alloy Steel Boiler and Superheater Tubes

 

• ASTM A210/A210M : Specification for Seamless Medium Carbon Steel Boiler and Superheater Tubes

 

• ASTM A211 : Withdrawn 1993 : Specification for Spiral-Welded Steel or Iron Pipe

 

• ASTM A212- : Specification for High Tensile Strength Carbon-Silicon Steel Plates for Boilers and Other Pressure Vessels (Withdrawn 1967)

 

• ASTM A213/A213M : Specification for Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater, and HeatExchanger Tubes

 

• ASTM A214/A214M : Specification for Electric Resistance Welded Carbon Steel Heat Exchanger and CondenserTubes

 

• ASTM A215 : Withdrawn 1947 : Specification for Mild-to-Medium-Strength Carbon-Steel Castings for General Application

 

• ASTM A216/A216M : Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High TemperatureService

 

• ASTM A217/A217M : Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure ContainingParts, Suitable for High Temperature Service

 

• ASTM A217A217M : of the Valve and Fittings IndustryEndorsed by American Foundrymen/s SocietyUsed in USDOE-NEStandardsStandard Specification for Steel Castings, Martensitic Stainless and Alloy, forPressure-

 

• ASTM A218 : Withdrawn 1963 : Specification for Zinc-Coated Steel Wire Strand (Class B and Class C Coatings)

 

• ASTM A219 : Withdrawn 1972 : Methods of Test for Local Thickness of Electrodeposited Coatings

 

• ASTM A21-94(1999) : Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use (Withdrawn 2003)

 

• ASTM A22 : Withdrawn 1934 : Specification for Cold-Rolled Steel Axles

 

• ASTM A220/A220M : Specification for Pearlitic Malleable Iron

 

• ASTM A220M-88(1993)e1 : Specification for Pearlitic Malleable Iron [Metric] (Withdrawn 1999)

 

• ASTM A221 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A222 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A223 : Withdrawn 1947 : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium-Nickel Alloy Castings for General Application

 

• ASTM A224 : Withdrawn 1969 : Recommended Practice for Conducting Plant Corrosion Tests

 

• ASTM A225/A225M : Specification for Pressure Vessel Plates, Alloy Steel, Manganese Vanadium Nickel

 

• ASTM A226/A226M-95 : Specification for Electric-Resistance-Welded Carbon Steel Boiler Superheater Tubes for High-Pressure Service (Withdrawn 1997)

 

• ASTM A227/A227M : Specification for Steel Wire, Cold Drawn for Mechanical Springs

 

• ASTM A228/A228M : Specification for Steel Wire, Music Spring Quality

 

• ASTM A229/A229M : Specification for Steel Wire, Oil Tempered for Mechanical Springs

 

• ASTM A23 : Withdrawn 1917 : Specification for Forged and Rolled, or Rolled Solid Carbon-Steel Wheels for Engine-Truck, Tender, and Passenger Service

 

• ASTM A230/A230M : Specification for Steel Wire, Oil Tempered Carbon Valve Spring Quality

 

• ASTM A231/A231M : Specification for Chromium Vanadium Alloy Steel Spring Wire

 

• ASTM A232/A232M : Specification for Chromium Vanadium Alloy Steel Valve Spring Quality Wire

 

• ASTM A233 : Withdrawn 1970 : Specification for Mild Steel Covered Arc-Welding Electrodes

 

• ASTM A234/A234M : Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate andHigh Temperature Service

 

• ASTM A235 : Withdrawn 1975 : Specification for Carbon Steel Forgings for General Industrial Use

 

• ASTM A236 : Withdrawn 1981 : Specification for Carbon Steel Forgings for Railway Use

 

• ASTM A237 : Withdrawn 1975 : Specification for Alloy Steel Forgings for General Industrial Use

 

• ASTM A238 : Withdrawn 1989 : Specification for Forgings, Alloy Steel, for Railway Use

 

• ASTM A239 : Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or SteelArticles

 

• ASTM A24 : Withdrawn 1917 : Specification for Forged and Rolled, or Rolled Solid Carbon-Steel Wheels for Freight-Car Service

 

• ASTM A240/A240M : Specification for Chromium and Chromium Nickel Stainless Steel Plate, Sheet, and Strip forPressure Vessels and for General Applications

 

• ASTM A241 : Withdrawn 1979 : Specification for Hot-Worked High-Carbon Steel Tie Plates

 

• ASTM A242/A242M : Specification for High Strength Low Alloy Structural Steel

 

• ASTM A243 : Withdrawn 1975 : Specification for Carbon and Alloy Steel Ring, Hollow Cylinder, and Disk Forgings for General Industrial Use

 

• ASTM A244 : Withdrawn 1947 : Specification for Multiple-Wear Wrought Steel Wheels

 

• ASTM A245 : Withdrawn 1972 : Specification for Flat-Rolled Carbon Steel Sheets of Structural Quality

 

• ASTM A246 : Withdrawn 1958 : Specification for Light Gage Structural Quality Flat Rolled Carbon-Steel Sheets

 

• ASTM A247 : Test Method for Evaluating the Microstructure of Graphite in Iron Castings

 

• ASTM A248 : Withdrawn 1972 : Specification for Carbon-Steel and Alloy-Steel Blooms, Billets, and Slabs for Forgings

 

• ASTM A249/A249M : Specification for Welded Austenitic Steel Boiler, Superheater, Heat Exchanger, andCondenser Tubes

 

• ASTM A249A249M : Used in USDOE-NE StandardsStandard Specification for Welded Austenitic Steel Boiler, Superheater,

 

• ASTM A25 : Withdrawn 1993 : Replaced by A 504 Specification for Wrought Steel Wheels for Electric Railway Service

 

• ASTM A250/A250M : Specification for Electric Resistance Welded Ferritic Alloy Steel Boiler and Superheater Tubes

 

• ASTM A251 : Withdrawn 1970 : Specification for Iron and Steel Gas-Welding Rods

 

• ASTM A252 : Specification for Welded and Seamless Steel Pipe Piles

 

• ASTM A253 : Withdrawn 1962 : Specification for Welded and Seamless Open-Hearth Iron Pipe

 

• ASTM A254 : Specification for Copper Brazed Steel Tubing

 

• ASTM A255 : Test Method for Determining Hardenability of Steel

 

• ASTM A256 : Withdrawn 1990 : Method of Compression Testing of Cast Iron

 

• ASTM A257 : Withdrawn 1945 : Methods of Permeability and Core Loss of Flat-Rolled Magnetic Materials using 28 cm Specimen [Replaced by A 34]

 

• ASTM A258 : Withdrawn 1945 : Methods of Testing Magnetic Materials

 

• ASTM A259 : Withdrawn 1945 : Methods of Testing Magnetic Materials

 

• ASTM A26 : Withdrawn 1966 : Specification for Steel Tires

 

• ASTM A260 : Withdrawn 1966 : Recommended Practice for Torsion Tests of Cast Iron

 

• ASTM A261 : Withdrawn 1959 : Specification for Heat-Treated Carbon-Steel Bolting Material

 

• ASTM A262 : Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

 

• ASTM A263 : Specification for Stainless Chromium Steel Clad Plate

 

• ASTM A264 : Specification for Stainless Chromium Nickel Steel Clad Plate

 

• ASTM A265 : Specification for Nickel and Nickel Base Alloy Clad Steel Plate

 

• ASTM A266/A266M : Specification for Carbon Steel Forgings for Pressure Vessel Components

 

• ASTM A267 : Withdrawn 1954 : Specification for Lead Coating (Hot-Dip) on Iron or Steel Hardware

 

• ASTM A268/A268M : Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing forGeneral Service

 

• ASTM A269 : Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

 

• ASTM A270 : Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing

 

• ASTM A271-96 : Specification for Seamless Austenitic Chromium-Nickel Steel Still Tubes for Refinery Service (Withdrawn 1999)

 

• ASTM A272 : Withdrawn 1945 : Method of Magnetic Particle Testing and Inspection of Commercial Steel Castings

 

• ASTM A273 : Withdrawn 1975 : Specification for Carbon-Steel Blooms, Billets, and Slabs for Forgings

 

• ASTM A274 : Withdrawn 1975 : Specification for Alloy-Steel Blooms, Billets, and Slabs for Forgings

 

• ASTM A275/A275M : Test Method for Magnetic Particle Examination of Steel Forgings

 

• ASTM A276 : Specification for Stainless Steel Bars and Shapes

 

• ASTM A277 : Withdrawn 1952 : Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine and Other Heavy Duty Service

 

• ASTM A278/A278M : Specification for Gray Iron Castings for Pressure Containing Parts for Temperatures Up to650°F (350°C)

 

• ASTM A278M-93e1 : Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 350°C (Withdrawn 2001)

 

• ASTM A279 : Withdrawn 1945 : Method of Total Immersion Corrosion Test of Stainless Steels

 

• ASTM A28 : Withdrawn 1925 : Specification for Lap-Welded and Seamless Steel Boiler Tubes for Locomotives

 

• ASTM A280 : Withdrawn 1953 : Specification for Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures

 

• ASTM A281 : Withdrawn 1947 : Specification for Mild to Medium Strength Carbon-Steel Castings for General Application

 

• ASTM A282 : Withdrawn 1945 : Specification for High-Strength Steel Castings for Structural Purposes

 

• ASTM A283/A283M : Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

 

• ASTM A284/A284M-90 : Specification for Low and Intermediate Tensile Strength Carbon-Silicon Steel Plates for Machine Parts and General Construction

 

• ASTM A285/A285M : Specification for Pressure Vessel Plates, Carbon Steel, Low and Intermediate TensileStrength

 

• ASTM A286 : Withdrawn 1960 : Specification for Heat-Treated Alloy-Steel Bars

 

• ASTM A287 : Withdrawn 1955 : Specification for Rolled Carbon-Steel Locomotive Frames

 

• ASTM A288 : Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for TurbineGenerators

 

• ASTM A289/A289M : Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

 

• ASTM A290/A290M : Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

 

• ASTM A291/A291M : Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts forReduction Gears

 

• ASTM A292 : Withdrawn 1968 : Specification for Carbon and Alloy Steel Forgings for Turbine Generator Rotors and Shafts

 

• ASTM A293 : Withdrawn 1984 : Specification for Steel Forgings, Carbon and Alloy, for Turbine Generator Rotors and Shafts

 

• ASTM A294 : Withdrawn 1988 : Specification for Alloy Steel Forgings for Turbine Wheels and Disks

 

• ASTM A295/A295M : Specification for High Carbon Anti Friction Bearing Steel

 

• ASTM A296- : Specification for Corrosion-Resistant Iron-Chromium and Iron-Chromium Nickel and Nickel-B Alloy Castings (Withdrawn 1980)

 

• ASTM A297/A297M : Specification for Steel Castings, Iron Chromium and Iron Chromium Nickel, Heat Resistant, for General Application

 

• ASTM A298 : Withdrawn 1970 : Specification for Corrosion-Resistant Chromium and Chromium-Nickel Steel Covered Welding Electrodes

 

• ASTM A299/A299M : Specification for Pressure Vessel Plates, Carbon Steel, Manganese Silicon

 

• ASTM A3 : Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non Heat Treated)

 

• ASTM A30 : Withdrawn 1964 : Specification for Boiler and Firebox Steel for Locomotives

 

• ASTM A300 : Withdrawn 1975 : Specification for Notch Toughness Requirements for Normalized Steel Plates for Pressure Vessels

 

• ASTM A301 : Withdrawn 1956 : Specification for Chromium-Molybdenum Steel Plates for Boilers and Other Pressure Vessels

 

• ASTM A302/A302M : Specification for Pressure Vessel Plates, Alloy Steel, Manganese Molybdenum andManganese Molybdenum Nickel

 

• ASTM A303 : Withdrawn 1970 : Specification for Hot-Rolled Carbon Steel Strip of Structural Quality

 

• ASTM A304 : Specification for Carbon and Alloy Steel Bars Subject to End Quench HardenabilityRequirements

 

• ASTM A305 : Withdrawn 1968 : Specification for Minimum Requirements for the Deformations of Deformed Steel Bars for Concrete Reinforcement

 

• ASTM A306 : Withdrawn 1975 : Specification for Carbon Steel Bars Subject to Mechanical Property Requirements

 

• ASTM A307 : Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

 

• ASTM A308/A308M : Specification for Steel Sheet, Terne (Lead Tin Alloy) Coated by the Hot Dip Process

 

• ASTM A309 : Test Method for Weight and Composition of Coating on Terne Sheet by the Triple Spot Test

 

• ASTM A310 : Withdrawn 1949 : Specification for Flat-Rolled Electrical Steel

 

• ASTM A311/A311M : Specification for Cold Drawn, Stress Relieved Carbon Steel Bars Subject to MechanicalProperty Requirements

 

• ASTM A312/A312M : Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

 

• ASTM A313/A313M : Specification for Stainless Steel Spring Wire

 

• ASTM A314 : Specification for Stainless Steel Billets and Bars for Forging

 

• ASTM A315 : Withdrawn 1952 : Specification for Seamless Ferritic Alloy-Steel Pipe for Service at High Temperatures

 

• ASTM A316 : Withdrawn 1969 : Specification for Low-Alloy Steel Covered Filler Metal Arc-Welding Electrodes

 

• ASTM A317 : Withdrawn 1975 : Method of Macroetch Testing and Inspection of Steel Forgings

 

• ASTM A318 : Withdrawn 1976 : Method of Tension Testing and Inspection of Steel Spring Wire

 

• ASTM A319 : Specification for Gray Iron Castings for Elevated Temperatures for Non Pressure ContainingParts

 

• ASTM A32 : Withdrawn 1927 : Specification for Cold-Drawn Bessemer Steel Automotive Screw Stock

 

• ASTM A320/A320M : Specification for Alloy Steel and Stainless Steel Bolting Materials for Low TemperatureService

 

• ASTM A321 : Specification for Steel Bars, Carbon, Quenched and Tempered

 

• ASTM A322 : Specification for Steel Bars, Alloy, Standard Grades

 

• ASTM A323 : Specification for Ferroboron

 

• ASTM A324 : Specification for Ferrotitanium

 

• ASTM A325 : Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

 

• ASTM A325M : Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength[Metric]

 

• ASTM A326-67 : Specification for Zinc-Coated (Galvanized) High Tensile Steel Telephone and Telegraph Line Wire (Withdrawn 1990)

 

• ASTM A327 : Test Methods for Impact Testing of Cast Irons

 

• ASTM A327M : Test Methods for Impact Testing of Cast Irons (Metric)

 

• ASTM A328/A328M : Specification for Steel Sheet Piling

 

• ASTM A329 : Withdrawn 1965 : Specification for Heat-Treated Steel Tires

 

• ASTM A33 : Withdrawn 1937 : Methods of Chemical Analysis of Plain Carbon Steel

 

• ASTM A330 : Withdrawn 1954 : Methods and Definition for Mechanical Testing of Steel Products

 

• ASTM A331 : Specification for Steel Bars, Alloy, Cold-Finished (Withdrawn 2004) Replaced by A108 0 ASTM 0

 

• ASTM A331-95(2000) : Specification for Steel Bars, Alloy, Cold-Finished (Withdrawn 2004)

 

• ASTM A332 : Withdrawn 1965 : Specification for Nickel-Chromium-Molybdenum Steel Bars for Springs

 

• ASTM A333/A333M : Specification for Seamless and Welded Steel Pipe for Low Temperature Service

 

• ASTM A334/A334M : Specification for Seamless and Welded Carbon and Alloy Steel Tubes for Low TemperatureService

 

• ASTM A335/A335M : Specification for Seamless Ferritic Alloy Steel Pipe for High Temperature Service

 

• ASTM A336/A336M : Specification for Alloy Steel Forgings for Pressure and High Temperature Parts

 

• ASTM A337 : Withdrawn 1955 : Specification for Zinc-Coated Iron or Steel Chain-link Fence Fabric Galvanized before Weaving

 

• ASTM A338 : Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine,

 

• ASTM A339 : Withdrawn 1965 : Specification for Iron Castings

 

• ASTM A340 : Terminology of Symbols and Definitions Relating to Magnetic Testing

 

• ASTM A341/A341M : Test Method for Direct Current Magnetic Properties of Materials Using D C Permeametersand the Ballistic Test Methods

 

• ASTM A342/A342M : Test Methods for Permeability of Feebly Magnetic Materials

 

• ASTM A343/A343M : Test Method for Alternating Current Magnetic Properties of Materials at Power FrequenciesUsing Wattmeter Ammeter Voltmeter Method and 25 cm Epstein Test Frame

 

• ASTM A344 : Withdrawn 1977 : Methods of Electrical and Mechanical Properties of Magnetic Materials

 

• ASTM A345 : Specification for Flat Rolled Electrical Steels for Magnetic Applications

 

• ASTM A346-74(1993)e1 : Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method (Withdrawn 1998)

 

• ASTM A348/A348M : Test Method for Alternating Current Magnetic Properties of Materials Using the WattmeterAmmeter Voltmeter Method, 100 to 10 000 Hz and 25 cm Epstein Frame

 

• ASTM A349 : Withdrawn 1984 : Test Methods for Alternating-Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 50 to 60 Hz and 50 cm Epstein Frame

 

• ASTM A35 : Withdrawn 1937 : Recommended Practice for Annealing of Miscellaneous Rolled and Forged Carbon-Steel Objects

 

• ASTM A350/A350M : Specification for Carbon and Low Alloy Steel Forgings, Requiring Notch Toughness Testingfor Piping Components

 

• ASTM A351/A351M : Specification for Castings, Austenitic, Austenitic Ferritic (Duplex), for Pressure ContainingParts

 

• ASTM A352/A352M : Specification for Steel Castings, Ferritic and Martensitic, for Pressure Containing Parts,

 

• ASTM A353/A353M : Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double Normalizedand Tempered

 

• ASTM A354 : Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other ExternallyThreaded Fasteners

 

• ASTM A355 : Specification for Steel Bars, Alloys, for Nitriding

 

• ASTM A356/A356M : Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy Walled forSteam Turbines

 

• ASTM A357 : Withdrawn 1973 : Specification for Pressure Vessel Plates, Alloy Steel, Five Percent Chromium, 0.5 percent Molybdenum

 

• ASTM A358/A358M : Specification for Electric Fusion Welded Austenitic Chromium Nickel Stainless Steel Pipe forHigh Temperature Service and General Applications

 

• ASTM A359 : Withdrawn 1954 : Methods and Definitions for Mechanical Testing of Structural Steel

 

• ASTM A36/A36M : Specification for Carbon Structural Steel

 

• ASTM A360 : Withdrawn 1993 : Method of Testing Chilled and White Iron Castings

 

• ASTM A360M : Withdrawn 1993 : Method of Testing Chilled and White Iron Castings [Metric]

 

• ASTM A361/A361M-94 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Roofing and Siding (Withdrawn 1995)

 

• ASTM A362 : Withdrawn 1977 : Specification for Iron-Chromium and Iron-Chromium-Nickel Alloy Tubular Centrifugal Castings for General Applications

 

• ASTM A363 : Specification for Zinc Coated (Galvanized) Steel Overhead Ground Wire Strand

 

• ASTM A364 : Withdrawn 1959 : Specification for Cold-Finished Heat-Treated Alloy-Steel Bars

 

• ASTM A365 : Withdrawn 1968 : Specification for Cold-Rolled Carbon Steel, Drawing Quality, and Special Killed

 

• ASTM A366/A366M-97e1 : Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled (Withdrawn 2000)

 

• ASTM A367 : Test Methods of Chill Testing of Cast Iron

 

• ASTM A368 : Specification for Stainless Steel Wire Strand

 

• ASTM A369/A369M : Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High TemperatureService

 

• ASTM A37 : Withdrawn 1936 : Recommended Practice for Carburizing and Heat-Treatment of Carburized Objects

 

• ASTM A371 : Withdrawn 1969 : Specification for Corrosion-Resisting Chromium and Chromium-Nickel Steel Welding Rods and Bare Electrodes

 

• ASTM A372/A372M : Specification for Carbon and Alloy Steel Forgings for Thin Walled Pressure Vessels

 

• ASTM A373 : Withdrawn 1966 : Specification for Structural Steel for Welding

 

• ASTM A374 : Withdrawn 1971 : Specification for High-Strength Low-Alloy Cold-Rolled Steel Sheets and Strip

 

• ASTM A375 : Withdrawn 1971 : Specification for High-Strength Low-Alloy Hot-Rolled Steel Sheets and Strip

 

• ASTM A376/A376M : Specification for Seamless Austenitic Steel Pipe for High Temperature Central Station Service

 

• ASTM A377 : Index of Specifications for Ductile Iron Pressure Pipe

 

• ASTM A378 : Withdrawn 1955 : Specification for Flat-Rolled Electrical Steel

 

• ASTM A379 : Withdrawn 1955 : Specification for Flat-Rolled Electrical Steel

 

• ASTM A38 : Withdrawn 1924 : Specification for Drawn or Rolled Alloy, 60 Percent Nickel, 16 Percent Chromium, and Balance Iron

 

• ASTM A380 : Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, andSystems

 

• ASTM A381 : Specification for Metal Arc Welded Steel Pipe for Use With High Pressure TransmissionSystems

 

• ASTM A382 : Withdrawn 1971 : Specification for Cold-Drawn Wrought Iron Heat-Exchanger and Condenser Tubes

 

• ASTM A384/A384M : Practice for Safeguarding Against Warpage and Distortion During Hot Dip Galvanizing ofSteel Assemblies

 

• ASTM A385 : Practice for Providing High Quality Zinc Coatings (Hot Dip)

 

• ASTM A386 : Withdrawn 1984 : Specification for Zinc Coating (Hot-Dip) on Assembled Steel Products

 

• ASTM A387/A387M : Specification for Pressure Vessel Plates, Alloy Steel, Chromium Molybdenum

 

• ASTM A388/A388M : Practice for Ultrasonic Examination of Heavy Steel Forgings

 

• ASTM A389/A389M : Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure Containing Parts,

 

• ASTM A389A389M : Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts,

 

• ASTM A39 : Withdrawn 1920 : Specification for Staybolt Iron

 

• ASTM A390 : Specification for Zinc Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal andStraight Line)

 

• ASTM A391/A391M : Specification for Grade 80 Alloy Steel Chain

 

• ASTM A392 : Specification for Zinc Coated Steel Chain Link Fence Fabric

 

• ASTM A393 : Withdrawn 1974 : Recommended Practice for Conducting Acidified Copper Sulfate Test for Intergranular Attack in Austenitic Stainless Steel

 

• ASTM A394 : Specification for Steel Transmission Tower Bolts, Zinc Coated and Bare

 

• ASTM A395/A395M : Specification for Ferritic Ductile Iron Pressure Retaining Castings for Use at ElevatedTemperatures

 

• ASTM A395M-88 : Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures [Metric] (Withdrawn 1998)

 

• ASTM A396 : Withdrawn 1965 : Specification for High-Strength Ductile Iron Castings

 

• ASTM A397 : Withdrawn 1958 : Specification for High Tensile Strength Carbon-Manganeses Steel Plates for Unfired Pressure Vessels

 

• ASTM A399 : Withdrawn 1969 : Specification for Surfacing Welding Rods and Electrodes

 

• ASTM A4 : Withdrawn 1965 : Specification for Medium-Carbon-Steel Splice Bars

 

• ASTM A40 : Withdrawn 1920 : Specification for Engine Bolt Iron

 

• ASTM A400 : Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

 

• ASTM A401/A401M : Specification for Steel Wire, Chromium Silicon Alloy

 

• ASTM A402 : Withdrawn 1958 : Specification for Forged or Rolled Alloy Steel Pipe Flanges, Forged Fittings, and Valves and Parts Specially Heat Treated for High-Temperature Service

 

• ASTM A403/A403M : Specification for Wrought Austenitic Stainless Steel Piping Fittings

 

• ASTM A404-68 : Specification for Forged or Rolled Alloy Steel Pip Flanges, Forged Fitings, and Valves and Parts Specially Heat Treated for High-Temperature Service (Withdrawn 1974)

 

• ASTM A405-91 : Specification for Seamless Ferritic Alloy-Steel Pipe Specially Heat Treated for High-Temperature Service (Withdrawn 1995)

 

• ASTM A406 : Withdrawn 1965 : Specification for High-Strength Structural Alloy Rivet Steel

 

• ASTM A407 : Specification for Steel Wire, Cold Drawn, for Coiled Type Springs

 

• ASTM A407M : Withdrawn 1989 : Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs [Metric]

 

• ASTM A408 : Withdrawn 1968 : Specification for Special Large Size Deformed Billet-Steel Bars for Concrete Reinforcement

 

• ASTM A409/A409M : Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or HighTemperature Service

 

• ASTM A41 : Withdrawn 1956 : Specification for Refined Iron Bars

 

• ASTM A410 : Withdrawn 1976 : Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Copper-Nickel-Aluminum

 

• ASTM A411 : Specification for Zinc Coated (Galvanized) Low Carbon Steel Armor Wire

 

• ASTM A412 : Withdrawn 1989 : Specification for Stainless and Heat-Resisting Chromium-Nickel-Manganese Steel Plate, Sheet, and Strip

 

• ASTM A413/A413M : Specification for Carbon Steel Chain

 

• ASTM A414/A414M : Specification for Steel, Sheet, Carbon, for Pressure Vessels

 

• ASTM A415- : Specification for Hot-Rolled Carbon Steel Sheets, Commercial Quality (Withdrawn 1970)

 

• ASTM A416/A416M : Specification for Steel Strand, Uncoated Seven Wire for Prestressed Concrete

 

• ASTM A417 : Specification for Steel Wire, Cold Drawn, for Zig Zag, Square Formed, and Sinuous TypeUpholstery Spring Units

 

• ASTM A417M : Withdrawn 1989 : Specification for Steel Wire, Cold-Drawn, for Zig-Zag Square-Formed, and Sinuous-Type Upholstery Spring Units [Metric]

 

• ASTM A418/A418M : Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

 

• ASTM A419 : Withdrawn 1971 : Specification for Electric-Fusion (Arc)- Welded Wrought Iron Plate pipe

 

• ASTM A42 : Withdrawn 1972 : Specification for Wrought Iron Plates

 

• ASTM A420/A420M : Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for LowTemperature Service

 

• ASTM A421/A421M : Specification for Uncoated Stress Relieved Steel Wire for Prestressed Concrete

 

• ASTM A422-64 : Specification for Butt Welds in Still Tubes for Refinery Service (Withdrawn 1994)

 

• ASTM A423/A423M : Specification for Seamless and Electric Welded Low Alloy Steel Tubes

 

• ASTM A424 : Specification for Steel, Sheet, for Porcelain Enameling

 

• ASTM A425- : Specification for Hot-Rolled Carbon Steel Strip, Commercial Quality (Withdrawn 1970)

 

• ASTM A426/A426M : Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High Temperature Service

 

• ASTM A427 : Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

 

• ASTM A428/A428M : Test Method for Weight [Mass] of Coating on Aluminum Coated Iron or Steel Articles

 

• ASTM A429 : Withdrawn 1976 : Specification for Hot- and Cold-Finished Bars of Stainless and Heat-Resisting Chromium-Nickel-Manganese Steel

 

• ASTM A43 : Withdrawn 1992 : Specification for Merchant Pig Iron

 

• ASTM A430/A430M-91 : Specification for Austentic Steel Forged and Bored Pipe for Hi GH-Temperature Service (Withdrawn 1995)

 

• ASTM A431 : Withdrawn 1968 : Specification for High-Strength Deformed Billet-Steel Bars for Concrete Reinforcement with 75,000 psi Minimum Yield Strength

 

• ASTM A432 : Withdrawn 1968 : Specification for Deformed Billet Steel Bars for Concrete Reinforcement with 60,000 psi Minimum Yield Point

 

• ASTM A433 : Withdrawn 1972 : Specification for Leaded, Carbon Steel Plates for Pressure Vessels

 

• ASTM A434 : Specification for Steel Bars, Alloy, Hot Wrought or Cold Finished, Quenched and Tempered

 

• ASTM A435/A435M : Specification for Straight Beam Ultrasonic Examination of Steel Plates

 

• ASTM A436 : Specification for Austenitic Gray Iron Castings

 

• ASTM A437/A437M : Specification for Alloy Steel Turbine Type Bolting Material Specially Heat Treated for HighTemperature Service

 

• ASTM A438 : Test Method for Transverse Testing of Gray Cast Iron (Withdrawn 2003) No Replacement 0 ASTM 0

 

• ASTM A438-80(1997) : Test Method for Transverse Testing of Gray Cast Iron (Withdrawn 2003)

 

• ASTM A439 : Specification for Austenitic Ductile Iron Castings

 

• ASTM A44 : Withdrawn 1955 : Specification for Engine Bolt Iron Cast Iron Pit-Cast Pipe for Water Other Liquids

 

• ASTM A440 : Withdrawn 1979 : Specification for High-Strength Structural Steel

 

• ASTM A441/A441M : Withdrawn 1989 : Specification for High-Strength Low-Alloy Structural Manganese Vanadium Steel

 

• ASTM A442/A442M : Withdrawn 1991 : Specification for Pressure Vessel Plates, Carbon Steel, Improved Transition Properties

 

• ASTM A443 : Withdrawn 1966 : Method of Notch Toughness of Turbine and Generator Steel Forgings

 

• ASTM A444/A444M-89 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process for Storm Sewer and Drainage Pipe (Withdrawn 1995)

 

• ASTM A445 : Withdrawn 1974 : Specification for Ferritic Iron Castings for Valves, Flanges, Pipe Fittings, and Other Piping Components

 

• ASTM A446/A446M-93 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality (Withdrawn 1994)

 

• ASTM A447/A447M : Specification for Steel Castings, Chromium Nickel Iron Alloy (25 12 Class), for HighTemperature Service

 

• ASTM A448 : Withdrawn 1976 : Specification for Nickel-Chromium-Iron Alloy Castings (35-15 Class) for High-Temperature Service

 

• ASTM A449 : Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi MinimumTensile Strength, General Use

 

• ASTM A45 : Withdrawn 1943 : Specification for Cast-Iron Locomotive Cylinders

 

• ASTM A450/A450M : Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy SteelTubes

 

• ASTM A451/A451M : Specification for Centrifugally Cast Austenitic Steel Pipe for High Temperature Service

 

• ASTM A452-88 : Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service (Withdrawn 1995)

 

• ASTM A453/A453M : Specification for High Temperature Bolting Materials, with Expansion CoefficientsComparable to Austenitic Stainless Steels

 

• ASTM A454 : Withdrawn 1980 : Specification for Steel Conveyor Chain

 

• ASTM A455/A455M : Specification for Pressure Vessel Plates, Carbon Steel, High Strength Manganese

 

• ASTM A456/A456M : Specification for Magnetic Particle Examination of Large Crankshaft Forgings

 

• ASTM A457 : Withdrawn 1990 : Specification for Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Plate, Sheet, and Strip for High Strength at Elevated Temperatures

 

• ASTM A458 : Withdrawn 1991 : Specification for Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures

 

• ASTM A459 : Specification for Zinc Coated Flat Steel Armoring Tape

 

• ASTM A46 : Withdrawn 1943 : Specification for Chilled-Tread Cast-Iron Wheels

 

• ASTM A460 : Specification for Copper Clad Steel Wire Strand

 

• ASTM A461 : Withdrawn 1971 : Specification for Precipitation Hardening Alloy Bars, Forgings, and Forging Stock for High-Temperature Service

 

• ASTM A463/A463M : Specification for Steel Sheet, Aluminum Coated, by the Hot Dip Process

 

• ASTM A464 : Withdrawn 1968 : Recommended Practice for Use of Magnetic Type Instruments for Measurement of Thickness of Hot-Dip Zinc Coatings on Iron and Steel

 

• ASTM A465 : Withdrawn 1975 : Specification for Leaded Carbon Steel Forged Pipe Flanges and Parts for Pressure and General Service

 

• ASTM A466/A466M : Specification for Weldless Chain

 

• ASTM A467/A467M : Specification for Machine and Coil Chain

 

• ASTM A468 : Withdrawn 1969 : Method of Normal Magnetic Induction Characteristics of Carbon and Alloy Steel Generator Rotor Forgings

 

• ASTM A469/A469M : Specification for Vacuum Treated Steel Forgings for Generator Rotors

 

• ASTM A47/A47M : Specification for Ferritic Malleable Iron Castings

 

• ASTM A470/A470M : Specification for Vacuum Treated Carbon and Alloy Steel Forgings for Turbine Rotors andShafts

 

• ASTM A471 : Specification for Vacuum Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

 

• ASTM A472/A472M : Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings

 

• ASTM A473 : Specification for Stainless Steel Forgings

 

• ASTM A474 : Specification for Aluminum Coated Steel Wire Strand

 

• ASTM A475 : Specification for Zinc Coated Steel Wire Strand

 

• ASTM A476/A476M : Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

 

• ASTM A476M-84(1993) : Specification for Ductile Iron Castings for Paper Mill Dryer Rolls [Metric] (Withdrawn 2000)

 

• ASTM A477 : Withdrawn 1991 : Specification for Hot-Worked, Hot-Cold Worked and Cold-Worked Alloy Steel Forgings and Forging Billets for High Strength at Elevated Temperatures

 

• ASTM A478 : Specification for Chromium Nickel Stainless Steel Weaving and Knitting Wire

 

• ASTM A479/A479M : Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other PressureVessels

 

• ASTM A47M-90(1996) : Specification for Ferritic Malleable Iron Castings [Metric] (Withdrawn 1998)

 

• ASTM A48/A48M : Specification for Gray Iron Castings

 

• ASTM A480/A480M : Specification for General Requirements for Flat Rolled Stainless and Heat Resisting SteelPlate, Sheet, and Strip

 

• ASTM A481 : Specification for Chromium Metal

 

• ASTM A482 : Specification for Ferrochrome Silicon

 

• ASTM A483 : Specification for Silicomanganese

 

• ASTM A484/A484M : Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

 

• ASTM A485 : Specification for High Hardenability Antifriction Bearing Steel

 

• ASTM A486/A486M : Withdrawn 1989 : Specification for Steel Castings for Highway Bridges

 

• ASTM A487/A487M : Specification for Steel Castings Suitable for Pressure Service

 

• ASTM A488/A488M : Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

 

• ASTM A489 : Specification for Carbon Steel Lifting Eyes

 

• ASTM A48M-94e1 : Specification for Gray Iron Castings [Metric] (Withdrawn 2000)

 

• ASTM A49 : Specification for Heat Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and ForgedCarbon Steel Compromise Joint Bars

 

• ASTM A490M : Specification for High Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural SteelJoints [Metric]

 

• ASTM A491 : Specification for Aluminum Coated Steel Chain Link Fence Fabric

 

• ASTM A492 : Specification for Stainless Steel Rope Wire

 

• ASTM A493 : Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

 

• ASTM A494/A494M : Specification for Castings, Nickel and Nickel Alloy

 

• ASTM A495 : Specification for Calcium Silicon Alloys

 

• ASTM A496/A496M : Specification for Steel Wire, Deformed, for Concrete Reinforcement

 

• ASTM A497/A497M : Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete

 

• ASTM A498 : Specification for Seamless and Welded Carbon Steel Heat Exchanger Tubes with IntegralFins

 

• ASTM A499 : Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

 

• ASTM A5 : Withdrawn 1979 : Specification for High-Carbon Steel Joint Bars

 

• ASTM A50 : Withdrawn 1937 : Specification for Quenched Carbon-Steel Track Bolts

 

• ASTM A500 : Specification for Cold Formed Welded and Seamless Carbon Steel Structural Tubing inRounds and Shapes

 

• ASTM A501 : Specification for Hot Formed Welded and Seamless Carbon Steel Structural Tubing

 

• ASTM A502 : Specification for Rivets, Steel, Structural

 

• ASTM A502-93 : Specification for Steel Structural Rivets (Withdrawn 1999)

 

• ASTM A503/A503M : Specification for Ultrasonic Examination of Forged Crankshafts

 

• ASTM A504/A504M : Specification for Wrought Carbon Steel Wheels

 

• ASTM A505 : Specification for Steel, Sheet and Strip, Alloy, Hot Rolled and Cold Rolled, GeneralRequirements for

 

• ASTM A506 : Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot Rolled and Cold Rolled

 

• ASTM A507 : Specification for Drawing Alloy Steel, Sheet and Strip, Hot Rolled and Cold Rolled

 

• ASTM A508/A508M : Specification for Quenched and Tempered Vacuum Treated Carbon and Alloy Steel Forgingsfor Pressure Vessels

 

• ASTM A509 : Withdrawn 1983 : Definition of Terms Relating to Steel Forgings

 

• ASTM A51 : Withdrawn 1937 : Specification for Quenched Alloy-Steel Track Bolts

 

• ASTM A510 : Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

 

• ASTM A510M : Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel[Metric]

 

• ASTM A511 : Specification for Seamless Stainless Steel Mechanical Tubing

 

• ASTM A512 : Specification for Cold Drawn Buttweld Carbon Steel Mechanical Tubing

 

• ASTM A513 : Specification for Electric Resistance Welded Carbon and Alloy Steel Mechanical Tubing

 

• ASTM A514/A514M : Specification for High Yield Strength, Quenched and Tempered Alloy Steel Plate, Suitable forWelding

 

• ASTM A515/A515M : Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate and HigherTemperature Service

 

• ASTM A516/A516M : Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower TemperatureService

 

• ASTM A517/A517M : Specification for Pressure Vessel Plates, Alloy Steel, High Strength, Quenched and Tempered

 

• ASTM A518/A518M : Specification for Corrosion Resistant High Silicon Iron Castings

 

• ASTM A518M-92(1997)e1 : Specification for Corrosion-Resistant High-Silicon Iron Castings [Metric] (Withdrawn 1999)

 

• ASTM A519 : Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

 

• ASTM A52 : Withdrawn 1925 : Specification for Lap-Welded and Seamless Steel and Wrought-Iron Boiler Tubes for Stationary Service

 

• ASTM A520-97 : Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction

 

• ASTM A521 : Specification for Steel, Closed Impression Die Forgings for General Industrial Use

 

• ASTM A522/A522M : Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, andParts for Low Temperature Service

 

• ASTM A523 : Specification for Plain End Seamless and Electric Resistance Welded Steel Pipe for HighPressure Pipe Type Cable Circuits

 

• ASTM A524 : Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

 

• ASTM A525-93 : Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994)

 

• ASTM A525M-91A : Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Metric) Withdrawn 1994

 

• ASTM A526/A526M-90 : Withdrawn 1994 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality

 

• ASTM A527/A527M-90E01 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality (Withdrawn 1994)

 

• ASTM A528/A528M-90 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process Drawing Quality (Withdrawn 1994)

 

• ASTM A529/A529M : Specification for High Strength Carbon Manganese Steel of Structural Quality

 

• ASTM A530/A530M : Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

 

• ASTM A531/A531M : Practice for Ultrasonic Examination of Turbine Generator Steel Retaining Rings

 

• ASTM A532/A532M : Specification for Abrasion Resistant Cast Irons

 

• ASTM A533/A533M : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, ManganeseMolybdenum and Manganese Molybdenum Nickel

 

• ASTM A534 : Specification for Carburizing Steels for Anti Friction Bearings

 

• ASTM A535-85 : Specification for Special-Quality Ball and Roller Bearing Steel (Withdrawn 1998)

 

• ASTM A536 : Specification for Ductile Iron Castings

 

• ASTM A537/A537M : Specification for Pressure Vessel Plates, Heat Treated, Carbon Manganese Silicon Steel

 

• ASTM A538/A538M : Withdrawn 1989 : Specification for Pressure Vessel Plates, Alloy Steel, Precipitation Hardening (Maraging), 18 Percent Nickel

 

• ASTM A539 : Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines(Withdrawn 2004) No Replacement

 

• ASTM A539-99 : Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004)

 

• ASTM A54 : Withdrawn 1927 : Specification for Cold-Drawn Open-Hearth Steel Automatic Screw Stock

 

• ASTM A540/A540M : Specification for Alloy Steel Bolting Materials for Special Applications

 

• ASTM A541/A541M : Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for PressureVessel Components

 

• ASTM A542/A542M : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, ChromiumMolybdenum, and Chromium Molybdenum Vanadium

 

• ASTM A542A542M : Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-

 

• ASTM A543/A543M : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered NickelChromium Molybdenum

 

• ASTM A544 : Withdrawn 1991 : Specification for Steel Wire, Carbon, Scrapless Nut Quality

 

• ASTM A545 : Withdrawn 1991 : Specification for Steel Wire, Carbon, Cold-Heading Quality, for Machine Screws

 

• ASTM A546 : Withdrawn 1991 : Specification for Steel Wire, Medium-High-Carbon, Cold-Heading Quality, for Hexagon-Head Bolts

 

• ASTM A547 : Withdrawn 1991 : Specification for Steel Wire, Alloy, Cold-Heading Quality, for Hexagon-Head Bolts

 

• ASTM A548 : Withdrawn 1991 : Specification for Steel Wire, Carbon, Cold-Heading Quality, for Tapping or Sheet Metal Screws

 

• ASTM A549 : Withdrawn 1991 : Specification for Steel Wire, Carbon, Cold-Heading Quality, for Wood Screws

 

• ASTM A55 : Withdrawn 1937 : Methods of Chemical Analysis of Alloy Steels

 

• ASTM A550 : Specification for Ferrocolumbium

 

• ASTM A551/A551M : Specification for Steel Tires

 

• ASTM A552 : Withdrawn 1974 : Specification for Alloy Steel Bars for Springs

 

• ASTM A553/A553M : Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9Percent Nickel

 

• ASTM A554 : Specification for Welded Stainless Steel Mechanical Tubing

 

• ASTM A555/A555M : Specification for General Requirements for Stainless Steel Wire and Wire Rods

 

• ASTM A556/A556M : Specification for Seamless Cold Drawn Carbon Steel Feedwater Heater Tubes

 

• ASTM A557/A557M- : Withdrawn 1995

 

• ASTM A558 : Withdrawn 1969 : Specification for Bare Mild Steel Electrodes and Fluxes for Submerged Arc Welding

 

• ASTM A559 : Withdrawn 1969 : Specification for Mild Steel Electrodes for Gas Metal-Arc Welding

 

• ASTM A56 : Withdrawn 1972 : Specification for Wrought Iron Crane Chain

 

• ASTM A560/A560M : Specification for Castings, Chromium Nickel Alloy

 

• ASTM A562/A562M : Specification for Pressure Vessel Plates, Carbon Steel, Manganese Titanium for Glass orDiffused Metallic Coatings

 

• ASTM A563 : Specification for Carbon and Alloy Steel Nuts

 

• ASTM A563M : Specification for Carbon and Alloy Steel Nuts [Metric]

 

• ASTM A564/A564M : Specification for Hot Rolled and Cold Finished Age Hardening Stainless Steel Bars andShapes

 

• ASTM A565/A565M : Specification for Martensitic Stainless Steel Bars for High Temperature Service

 

• ASTM A566 : Withdrawn 1984 : Test Method for Alternating-Current Magnetic Properties of Materials Using the Alternating Current Potentiometer and 25-cm Epstein framemed>

 

• ASTM A567/A567M- : Specification for Castings, Iron, Cobalt, and Nickel-Base Alloy, for High Strength at Elevated Temperatures (Withdrawn 1985)

 

• ASTM A568/A568M : Specification for Steel, Sheet, Carbon, Structural, and High Strength, Low Alloy, Hot Rolledand Cold Rolled, General Requirements for/

 

• ASTM A568M : Withdrawn 1991 : Specification for General Requirement for Steel, Carbon and High-Strength Low-Alloy Hot-Rolled Sheet and Cold-Rolled Sheet [Metric]

 

• ASTM A569/A569M-98 : Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial (Withdrawn 2000)

 

• ASTM A57 : Withdrawn 1966 : Specification for Multiple-Wear Wrought Steel Wheels

 

• ASTM A570/A570M-98 : Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000)

 

• ASTM A571/A571M : Specification for Austenitic Ductile Iron Castings for Pressure Containing Parts Suitable forLow Temperature Service

 

• ASTM A571M-84(1997) : Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service [Metric] (Withdrawn 2001)

 

• ASTM A572/A572M : Specification for High Strength Low Alloy Columbium Vanadium Structural Steel

 

• ASTM A572A572M : Highway and TransportationOfficals StandardAASHTO No. : M223Standard Specification for High-

 

• ASTM A573/A573M : Specification for Structural Carbon Steel Plates of Improved Toughness

 

• ASTM A574 : Specification for Alloy Steel Socket Head Cap Screws

 

• ASTM A574M : Specification for Alloy Steel Socket Head Cap Screws [Metric]

 

• ASTM A575 : Specification for Steel Bars, Carbon, Merchant Quality, M Grades

 

• ASTM A576 : Specification for Steel Bars, Carbon, Hot Wrought, Special Quality

 

• ASTM A577/A577M : Specification for Ultrasonic Angle Beam Examination of Steel Plates

 

• ASTM A578/A578M : Specification for Straight Beam Ultrasonic Examination of Plain and Clad Steel Plates forSpecial Applications

 

• ASTM A579/A579M : Specification for Superstrength Alloy Steel Forgings

 

• ASTM A58 : Withdrawn 1943 : Specification for Carbon-Steel Bars for Vehicle and General Purpose Springs

 

• ASTM A580/A580M : Specification for Stainless Steel Wire

 

• ASTM A581/A581M : Specification for Free Machining Stainless Steel Wire and Wire Rods

 

• ASTM A582/A582M : Specification for Free Machining Stainless Steel Bars

 

• ASTM A583 : Specification for Cast Steel Wheels for Railway Service (Withdrawn 2004) No Replacement 0 ASTM 0

 

• ASTM A583-93(1999) : Specification for Cast Steel Wheels for Railway Service (Withdrawn 2004)

 

• ASTM A584-97 : Specification for Aluminum-Coated Steel Woven Wire Fence Fabric (Withdrawn 2002)

 

• ASTM A585-97 : Specification for Aluminum-Coated Steel Barbed Wire (Withdrawn 2002)

 

• ASTM A586 : Specification for Zinc Coated Parallel and Helical Steel Wire Structural Strand

 

• ASTM A587 : Specification for Electric Resistance Welded Low Carbon Steel Pipe for the Chemical Industry

 

• ASTM A588/A588M : Specification for High Strength Low Alloy Structural Steel with 50 ksi [345 MPa] MinimumYield Point to 4 in. [100 mm] Thick

 

• ASTM A588A588M : American Association StateHighway and Transportation Officials StandardAASHTO No. : M222Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345MPa]

 

• ASTM A589 : Specification for Seamless and Welded Carbon Steel Water Well Pipe

 

• ASTM A59 : Withdrawn 1966 : Specification for Silicon-Manganese Steel Bars for Springs

 

• ASTM A590 : Withdrawn 1984 : Specification for Pressure Vessel Plates, Alloy Steel, Precipitation Hardening (Maraging) 12 Percent Nickel

 

• ASTM A591/A591M : Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass]

 

• ASTM A591/A591M-98 : Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications (Withdrawn 2005)

 

• ASTM A592/A592M : Specification for High Strength Quenched and Tempered Low Alloy Steel Forged Fittings andParts for Pressure Vessels

 

• ASTM A593 : Withdrawn 1976 : Specification for Charpy V-nNtch Testing Requirements for Steel Plates for Pressure Vessel

 

• ASTM A594 : Withdrawn 1986 : Specification for Carbon Steel Forgings with Special Magnetic Characteristics

 

• ASTM A595 : Specification for Steel Tubes, Low Carbon, Tapered for Structural Use

 

• ASTM A596/A596M : Test Method for Direct Current Magnetic Properties of Materials Using the Ballistic Methodand Ring Specimens

 

• ASTM A597 : Specification for Cast Tool Steel

 

• ASTM A598/A598M : Test Method for Magnetic Properties of Magnetic Amplifier Cores

 

• ASTM A599 : Withdrawn 1992 : Specification for Steel Sheet, Cold-Rolled, Tin-Coated by Electrodeposition

 

• ASTM A599/A599M : Specification for Tin Mill Products, Electrolytic Tin Coated, Cold Rolled Sheet

 

• ASTM A6/A6M : Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, andSheet Piling

 

• ASTM A60 : Withdrawn 1966 : Specification for Chromium-Vanadium Steel Bars for Springs

 

• ASTM A600 : Specification for Tool Steel High Speed

 

• ASTM A601 : Specification for Electrolytic Manganese Metal

 

• ASTM A602 : Specification for Automotive Malleable Iron Castings

 

• ASTM A603 : Specification for Zinc Coated Steel Structural Wire Rope

 

• ASTM A604 : Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

 

• ASTM A605/A605M : Withdrawn 1989 : Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered Nickel-Cobalt-Molybdenum-Chromium

 

• ASTM A606 : Specification for Steel, Sheet and Strip, High Strength, Low Alloy, Hot Rolled and ColdRolled, with Improved Atmospheric Corrosion Resistance

 

• ASTM A606A606M : Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolledand Cold-

 

• ASTM A607-98 : Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled (Withdrawn 2000)

 

• ASTM A608/A608M : Specification for Centrifugally Cast Iron Chromium Nickel High Alloy Tubing for PressureApplication at High Temperatures

 

• ASTM A609/A609M : Practice for Castings, Carbon, Low Alloy, and Martensitic Stainless Steel, UltrasonicExamination Thereof

 

• ASTM A61 : Withdrawn 1969 : Specification for Deformed Rail Steel Bars for Concrete Reinforcement with 60,000 psi Minimum Yield Strength

 

• ASTM A610 : Test Methods for Sampling and Testing Ferroalloys for Determination of Size

 

• ASTM A611-97 : Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)

 

• ASTM A612/A612M : Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate andLower Temperature Service

 

• ASTM A613 : Withdrawn 1984 : Specification for Special Requirements for Steel Castings for Nuclear and Other Special Applications

 

• ASTM A614-79 : Specification for Special Requirements for Bolting Material for Nuclear and Other Special Applications (Withdrawn 1986)

 

• ASTM A615/A615M : Specification for Deformed and Plain Carbon Steel Bars for Concrete Reinforcement

 

• ASTM A615M-92A : Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement (Metric) (Withdrawn 1993)

 

• ASTM A616/A616M-96a : Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)

 

• ASTM A617/A617M-96a : Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)

 

• ASTM A618/A618M : Specification for Hot Formed Welded and Seamless High Strength Low Alloy StructuralTubing

 

• ASTM A619/A619M-97 : Specification for Non-Killed Forming Steel (NKFS) Sheet, Carbon Cold-Rolled (Withdrawn 1998)

 

• ASTM A62 : Withdrawn 1949 : Specification for Steel Elliptical Springs

 

• ASTM A620/A620M-97 : Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)

 

• ASTM A621/A621M-97 : Specification for Forming Steel (FS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 1997)

 

• ASTM A622/A622M-97 : Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 2000)

 

• ASTM A623 : Specification for Tin Mill Products, General Requirements

 

• ASTM A623M : Specification for Tin Mill Products, General Requirements [Metric]

 

• ASTM A624/A624M : Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

 

• ASTM A625/A625M : Specification for Tin Mill Products, Black Plate, Single Reduced

 

• ASTM A625M-85 : Specification for Tin Mill Products, Black Plate, Single Reduced. (Metric) (Withdrawn 1992)

 

• ASTM A626/A626M : Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

 

• ASTM A628-74 : Specification for Steel, Strip, High-Carbon, Cold-Rolled, Spring Quality, General Requirements For (Withdrawn 1981)

 

• ASTM A629 : Specification for Tool Resisting Steel Flat Bars and Shapes for Security Applications(Withdrawn 2004) Replaced by A627

 

• ASTM A629-88(1994)e1 : Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications (Withdrawn 2004)

 

• ASTM A63 : Withdrawn 1941 : Specification for Alloy Steel Forgings for Locomotives and Cars

 

• ASTM A630 : Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

 

• ASTM A631-85 : Specification for Cast Steel Wheels for Electrical Railway Service (Withdrawn 1993)

 

• ASTM A632 : Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small Diameter) forGeneral Service

 

• ASTM A633/A633M : Specification for Normalized High Strength Low Alloy Structural Steel Plates

 

• ASTM A634-70 : Specification for Steel Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, Aircraft Quality (Withdrawn 1977)

 

• ASTM A635/A635M : Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon,

 

• ASTM A635A635M : Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled,Alloy, Carbon,

 

• ASTM A635M-90 : Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled (Metric) (Withdrawn 1990)

 

• ASTM A636 : Specification for Nickel Oxide Sinter

 

• ASTM A638/A638M : Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and ForgingStock for High Temperature Service

 

• ASTM A64 : Withdrawn 1937 : Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron

 

• ASTM A640 : Specification for Zinc Coated Steel Strand for Messenger Support of Figure 8 Cable

 

• ASTM A641/A641M : Specification for Zinc Coated (Galvanized) Carbon Steel Wire

 

• ASTM A642/A642M- : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot Dip Process, Drawing Quality, Special Killed (Withdrawn 1994)

 

• ASTM A643-78 : Specification for Steel Castings, Heavy-Walled, Carbon and Alloy for Pressure Vessels (Withdrawn 1982)

 

• ASTM A644 : Terminology Relating to Iron Castings

 

• ASTM A645/A645M : Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially HeatTreated

 

• ASTM A646/A646M : Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and AerospaceForgings

 

• ASTM A647-77 : Specification for Special Requirements for Steel Plates for Nuclear and Other Special Applications (Withdrawn 1981)

 

• ASTM A648 : Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe

 

• ASTM A649/A649M : Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

 

• ASTM A65 : Specification for Steel Track Spikes

 

• ASTM A650/A650M : Specification for Tin Mill Products, Black Plate, Double Reduced

 

• ASTM A650M-83 : Specification for Special Requirements for Steel Plates for Nuclear and Other Special Applications (Withdrawn 1988)

 

• ASTM A651-84 : Specification for Stainless Steel Water-DWV Tube (Withdrawn 1986)

 

• ASTM A652-80 : Specification for Special Requirements for Wrought Steel Welding Fittings for Nuclear and Other Special Applications (Withdrawn 1983)

 

• ASTM A653/A653M : Specification for Steel Sheet, Zinc Coated (Galvanized) or Zinc Iron Alloy Coated(Galvannealed) by the Hot Dip Process

 

• ASTM A654-79 : Specification for Special Requirements for Steel Forgings and Bars for Nuclear and Other Special Applications (Withdrawn 1983)

 

• ASTM A655-77 : Specification for Special Requirements for Pipe and Tubing for Nuclear and Other Special Applications (Withdrawn 1983)

 

• ASTM A656/A656M : Specification for Hot Rolled Structural Steel, High Strength Low Alloy Plate with ImprovedFormability

 

• ASTM A657/A657M : Specification for Tin Mill Products, Black Plate Electrolytic Chromium Coated, Single andDouble Reduced

 

• ASTM A658/A658M-82 : Specification for Pressure Vessel Plates, Alloy Steel, 36 Percent Nickel (Withdrawn 1988)

 

• ASTM A659/A659M : Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25Maximum Percent), Hot Rolled

 

• ASTM A66 : Specification for Steel Screw Spikes

 

• ASTM A660 : Specification for Centrifugally Cast Carbon Steel Pipe for High Temperature Service

 

• ASTM A662/A662M : Specification for Pressure Vessel Plates, Carbon Manganese Silicon Steel, for Moderate andLower Temperature Service

 

• ASTM A663/A663M : Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

 

• ASTM A665-84 : Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G048, 27G053, 30G058, and 35G066 (Withdrawn 1987)

 

• ASTM A665M-84 : Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 23G106M, 27G117M, 30G128M, and 35G146M (Withdrawn 1987)

 

• ASTM A666 : Specification for Annealed or Cold Worked Austenitic Stainless Steel Sheet, Strip, Plate, andFlat Bar

 

• ASTM A667/A667M : Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

 

• ASTM A667M-84 : Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders (Metric) (Withdrawn 1987)

 

• ASTM A668/A668M : Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

 

• ASTM A669-83 : Specification for Seamless Ferritic-Austenitic Alloy Steel Tubes (Withdrawn 1983)

 

• ASTM A67 : Specification for Steel Tie Plates, Low Carbon and High Carbon Hot Worked

 

• ASTM A671 : Specification for Electric Fusion Welded Steel Pipe for Atmospheric and Lower Temperatures

 

• ASTM A672 : Specification for Electric Fusion Welded Steel Pipe for High Pressure Service at ModerateTemperatures

 

• ASTM A673/A673M : Specification for Sampling Procedure for Impact Testing of Structural Steel

 

• ASTM A674 : Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

 

• ASTM A675/A675M : Specification for Steel Bars, Carbon, Hot Wrought, Special Quality, Mechanical Properties

 

• ASTM A676-72 : Specification for Hot-Dipped Aluminum Coatings on Ferrous Articles (Withdrawn 1987)

 

• ASTM A677 : Specification for Nonoriented Electrical Steel Fully Processed Types

 

• ASTM A677M-98a : Specification for Nonoriented Electrical Steel, Fully Processed Types (Metric) (Withdrawn 2000)

 

• ASTM A678/A678M : Specification for Quenched and Tempered Carbon and High Strength Low Alloy StructuralSteel Plates

 

• ASTM A679/A679M : Specification for Steel Wire, High Tensile Strength, Cold Drawn

 

• ASTM A68 : Withdrawn 1975 : Specification for Carbon Steel Bars for Springs

 

• ASTM A680/A680M-81 : Specification for Steel, Strip, High-Carbon, Cold-Rolled Hard, Untempered Quality (Withdrawn 1986) Withdrawn 1986

 

• ASTM A681 : Specification for Tool Steels Alloy

 

• ASTM A682/A682M : Specification for Steel, Strip, High Carbon, Cold Rolled, General Requirements For&dup2;

 

• ASTM A682M-91(1993)e1 : Specification for Steel Strip, High-Carbon, Cold-Rolled, Spring Quality, General Requirementes for [Metric] (Withdrawn 1998)

 

• ASTM A683 : Specification for Nonoriented Electrical Steel, Semiprocessed Types

 

• ASTM A683M-91 : Specification for Nonoriented Electrical Steel, Semiprocessed Types [Metric] (Withdrawn 1999)

 

• ASTM A684/A684M : Specification for Steel, Strip, High Carbon, Cold Rolled

 

• ASTM A685-84 : Specification for Machined Flat and Square Tool Steel Bars (Withdrawn 1985)

 

• ASTM A686 : Specification for Tool Steel, Carbon

 

• ASTM A687-93 : Specification for High-Strength Nonheaded Steel Bolts and Studs (Withdrawn 1999)

 

• ASTM A688/A688M : Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes

 

• ASTM A689 : Specification for Carbon and Alloy Steel Bars for Springs

 

• ASTM A69 : Withdrawn 1927 : Specification for Elliptical Steel Springs for Automobiles

 

• ASTM A690/A690M : Specification for High Strength Low Alloy Steel H Piles and Sheet Piling for Use in MarineEnvironments

 

• ASTM A691 : Specification for Carbon and Alloy Steel Pipe, Electric Fusion Welded for High PressureService at High Temperatures

 

• ASTM A693 : Specification for Precipitation Hardening Stainless and Heat Resisting Steel Plate, Sheet, andStrip

 

• ASTM A694/A694M : Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Partsfor High Pressure Transmission Service

 

• ASTM A695-90b(1995)e1 : Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications (Withdrawn 2002)

 

• ASTM A696 : Specification for Steel Bars, Carbon, Hot Wrought or Cold Finished, Special Quality, forPressure Piping Components

 

• ASTM A697/A697M : Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen UsingVoltmeter Ammeter Wattmeter Methods

 

• ASTM A698/A698M : Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

 

• ASTM A699-77 : Specification for Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel Plates (Withdrawn 1985)

 

• ASTM A7 : Withdrawn 1967 : Specification for Steel for Bridges and Building

 

• ASTM A70 : Withdrawn 1947 : Specification for Low and Intermediate Tensile Strength Carbon-Steel

 

• ASTM A700 : Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment

 

• ASTM A701 : Specification for Ferromanganese Silicon

 

• ASTM A702 : Specification for Steel Fence Posts and Assemblies, Hot Wrought

 

• ASTM A703/A703M : Specification for Steel Castings, General Requirements, for Pressure Containing Parts

 

• ASTM A704/A704M : Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

 

• ASTM A705/A705M : Specification for Age Hardening Stainless Steel Forgings

 

• ASTM A706/A706M : Specification for Low Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

 

• ASTM A707/A707M : Specification for Forged Carbon and Alloy Steel Flanges for Low Temperature Service

 

• ASTM A708-79 : Practice for Detection of Susceptibility to Intergranular Corrosion in Severely Sensitized Austenitic Stainless Steel (Withdrawn 1988)

 

• ASTM A709/A709M : Specification for Carbon and High Strength Low Alloy Structural Steel Shapes, Plates, andBars and Quenched and Tempered Alloy Structural Steel Plates for Bridges

 

• ASTM A71 : Withdrawn 1937 : Specification for Carbon Tool Steel

 

• ASTM A710/A710M : Specification for Precipitation Strengthened Low Carbon Nickel Copper ChromiumMolybdenum Columbium Alloy Structural Steel Plates

 

• ASTM A711 : Specification for Steel Forging Stock

 

• ASTM A712 : Test Method for Electrical Resistivity of Soft Magnetic Alloys

 

• ASTM A713 : Specification for Steel Wire, High Carbon Spring, for Heat Treated Components

 

• ASTM A714 : Specification for High Strength Low Alloy Welded and Seamless Steel Pipe

 

• ASTM A715-98 : Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000)

 

• ASTM A716 : Specification for Ductile Iron Culvert Pipe

 

• ASTM A717/A717M : Test Method for Surface Insulation Resistivity of Single Strip Specimens

 

• ASTM A718-75 : Test Method for Surface Insulation Resistivity of Multi-Strip Specimens (Withdrawn 1996)

 

• ASTM A719/A719M : Test Method for Lamination Factor of Magnetic Materials

 

• ASTM A72 : Withdrawn 1972 : Specification for Welded Wrought-Iron Pipe

 

• ASTM A720/A720M : Test Method for Ductility of Nonoriented Electrical Steel

 

• ASTM A721/A721M : Test Method for Ductility of Oriented Electrical Steel

 

• ASTM A722/A722M : Specification for Uncoated High Strength Steel Bar for Prestressing Concrete

 

• ASTM A723/A723M : Specification for Alloy Steel Forgings for High Strength Pressure Component Application

 

• ASTM A724/A724M : Specification for Pressure Vessel Plates, Carbon Manganese Silicon Steel, Quenched andTempered, for Welded Layered Pressure Vessels

 

• ASTM A725-84 : Specification for Flat-Rolled, Grain-Oriented, Silicon Iron, Electrical Steel, Fully Processed, Types 27H076, 30H083, 35H094 (Withdrawn 1988)

 

• ASTM A725M-84 : Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168M, 30H183M, 35H207M (Withdrawn 1988)

 

• ASTM A726 : Specification for Cold Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

 

• ASTM A726M-92 : Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semi-Processed Types [Metric] (Withdrawn 1998)

 

• ASTM A727/A727M : Specification for Carbon Steel Forgings for Piping Components with Inherent NotchToughness

 

• ASTM A729/A729M : Specification for Alloy Steel Axles, Heat Treated, for Mass Transit and Electric RailwayService

 

• ASTM A73 : Withdrawn 1972 : Specification for Wrought Iron Rolled or Forged Blooms and Forgings

 

• ASTM A730 : Specification for Forgings, Carbon and Alloy Steel, for Railway Use (Withdrawn 2004) Replaced by A668/A668M-04

 

• ASTM A730-93(1999) : Specification for Forgings, Carbon and Alloy Steel, for Railway Use (Withdrawn 2004)

 

• ASTM A731/A731M- : Specification for Seamless, Welded Ferritic, and Martensitic Stainless Steel Pipe (Withdrawn 1995)

 

• ASTM A732/A732M : Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application,

 

• ASTM A732A732M : Specification for Castings, Investment, Carbon and Low Alloy Steel forGeneral Application,

 

• ASTM A733 : Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel PipeNipples

 

• ASTM A734/A734M : Specification for Pressure Vessel Plates, Alloy Steel and High Strength Low Alloy Steel, Quenched and Tempered

 

• ASTM A735/A735M : Specification for Pressure Vessel Plates, Low Carbon Manganese Molybdenum ColumbiumAlloy Steel, for Moderate and Lower Temperature Service

 

• ASTM A736/A736M : Specification for Pressure Vessel Plates, Low Carbon Age Hardening Nickel CopperChromium Molybdenum Columbium and Nickel Copper Manganese Molybdenum Columbium AlloySteel

 

• ASTM A737/A737M : Specification for Pressure Vessel Plates, High Strength, Low Alloy Steel

 

• ASTM A738/A738M : Specification for Pressure Vessel Plates, Heat Treated, Carbon Manganese Silicon Steel, forModerate and Lower Temperature Service

 

• ASTM A739 : Specification for Steel Bars, Alloy, Hot Wrought, for Elevated Temperature or PressureContaining Parts, or Both

 

• ASTM A740 : Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

 

• ASTM A742/A742M : Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated SteelPipe

 

• ASTM A742A742M : Transportation Officials StandardAASHTO No. M 246/M 246MStandard Specification for Steel Sheet,

 

• ASTM A743/A743M : Specification for Castings, Iron Chromium, Iron Chromium Nickel, Corrosion Resistant, forGeneral Application

 

• ASTM A744/A744M : Specification for Castings, Iron Chromium Nickel, Corrosion Resistant, for Severe Service

 

• ASTM A745/A745M : Practice for Ultrasonic Examination of Austenitic Steel Forgings

 

• ASTM A746 : Specification for Ductile Iron Gravity Sewer Pipe

 

• ASTM A747/A747M : Specification for Steel Castings, Stainless, Precipitation Hardening

 

• ASTM A748/A748M : Specification for Statically Cast Chilled White Iron Gray Iron Dual Metal Rolls for PressureVessel Use

 

• ASTM A749/A749M : Specification for Steel, Strip, Carbon and High Strength, Low Alloy, Hot Rolled, GeneralRequirements for

 

• ASTM A749M-90A : Specification for General Requirements for Steel, Carbon and High-Strength, Low-Alloy, Hot-Rolled Strip Metric (Withdrawn 1991)

 

• ASTM A75 : Withdrawn 1921 : Specification for Malleable Iron Castings

 

• ASTM A750 : Specification for Steel Air Ventilating Grille Units for Detention Areas (Withdrawn 2004) NoReplacement

 

• ASTM A750-77(1994)e1 : Specification for Steel Air Ventilating Grille Units for Detention Areas (Withdrawn 2004)

 

• ASTM A751 : Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

 

• ASTM A752 : Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel

 

• ASTM A752M : Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel[Metric]

 

• ASTM A753 : Specification for Wrought Nickel Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

 

• ASTM A754/A754M : Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X Ray Fluorescence

 

• ASTM A755/A755M : Specification for Steel Sheet, Metallic Coated by the Hot Dip Process and Prepainted by theCoil Coating Process for Exterior Exposed Building Products

 

• ASTM A756 : Specification for Stainless Anti Friction Bearing Steel

 

• ASTM A757/A757M : Specification for Steel Castings, Ferritic and Martensitic, for Pressure Containing and OtherApplications, for Low Temperature Service

 

• ASTM A758/A758M : Specification for Wrought Carbon Steel Butt Welding Piping Fittings with Improved NotchToughness

 

• ASTM A759 : Specification for Carbon Steel Crane Rails

 

• ASTM A76 : Withdrawn 1981 : Specification for Low-Carbon Steel Track Bolts and Nuts

 

• ASTM A760/A760M : Specification for Corrugated Steel Pipe, Metallic Coated for Sewers and Drains

 

• ASTM A761/A761M : Specification for Corrugated Steel Structural Plate, Zinc Coated, for Field Bolted Pipe, PipeArches, and Arches

 

• ASTM A762/A762M : Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

 

• ASTM A763 : Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

 

• ASTM A764 : Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size forMechanical Springs

 

• ASTM A765/A765M : Specification for Carbon Steel and Low Alloy Steel Pressure Vessel Component Forgings withMandatory Toughness Requirements

 

• ASTM A766/A766M- : Specification for Forgings (Withdrawn 1989)

 

• ASTM A767/A767M : Specification for Zinc Coated (Galvanized) Steel Bars for Concrete Reinforcement

 

• ASTM A768/A768M : Specification for Vacuum Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotorsand Shafts

 

• ASTM A769/A769M : Carbon and High Strength Electric Resistance Forge Welded Steel Structural Shapes

 

• ASTM A77 : Withdrawn 1935 : Specification for Electric Cast-Steel Stud-Link Anchor Chain

 

• ASTM A770/A770M : Specification for Through Thickness Tension Testing of Steel Plates for Special Applications

 

• ASTM A771/A771M : Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-

 

• ASTM A771/A771M-95(2001) : Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)

 

• ASTM A772/A772M : Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current

 

• ASTM A773/A773M : Test Method for dc Magnetic Properties of Materials Using Ring and PermeameterProcedures with dc Electronic Hysteresigraphs

 

• ASTM A774/A774M : Specification for As Welded Wrought Austenitic Stainless Steel Fittings for General CorrosiveService at Low and Moderate Temperatures

 

• ASTM A775/A775M : Specification for Epoxy Coated Steel Reinforcing Bars

 

• ASTM A778 : Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

 

• ASTM A779/A779M : Specification for Steel Strand, Seven Wire, Uncoated, Compacted, Stress Relieved forPrestressed Concrete

 

• ASTM A78 : Withdrawn 1947 : Specification for Low Tensile Strength Carbon-Steel Plates of Structured Quality for Welding

 

• ASTM A780 : Practice for Repair of Damaged and Uncoated Areas of Hot Dip Galvanized Coatings

 

• ASTM A781/A781M : Specification for Castings, Steel and Alloy, Common Requirements, for General IndustrialUse

 

• ASTM A782/A782M : Specification for Pressure Vessel Plates, Quenched and Tempered, Manganese ChromiumMolybdenum Silicon Zirconium Alloy Steel

 

• ASTM A783-81 : Specification for Aluminum-Zinc-Alloy-Coated Steel Chain Link Fence Fabric (Withdrawn 1986)

 

• ASTM A784-81 : Specification for Aluminum-Zinc Alloy-Coated Steel Wire Rope and Fittings for Highway Guard Rail (Withdrawn 1987)

 

• ASTM A785-81 : Specification for Aluminum-Zinc Alloy-Coated Wire Strand (Withdrawn 1987)

 

• ASTM A786/A786M : Specification for Hot Rolled Carbon, Low Alloy, High Strength Low Alloy, and Alloy SteelFloor Plates

 

• ASTM A787 : Specification for Electric Resistance Welded Metallic Coated Carbon Steel Mechanical Tubing

 

• ASTM A788/A788M : Specification for Steel Forgings, General Requirements

 

• ASTM A789/A789M : Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for GeneralService

 

• ASTM A79 : Withdrawn 1921 : Specification for Staybolt Wrought Iron Solid

 

• ASTM A790/A790M : Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

 

• ASTM A791/A791M-94 : Specification for Aluminum-Zinc Alloy-Coated Wire Strand (Withdrawn 1995)

 

• ASTM A792/A792M : Specification for Steel Sheet, 55 % Aluminum Zinc Alloy Coated by the Hot Dip Process

 

• ASTM A792M-93 : Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot Dip Process, General Requirements (Metric) (Withdrawn 1994)

 

• ASTM A793 : Specification for Rolled Floor Plate, Stainless Steel

 

• ASTM A794 : Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold Rolled

 

• ASTM A795/A795M : Specification for Black and Hot Dipped Zinc Coated (Galvanized) Welded and Seamless SteelPipe for Fire Protection Use

 

• ASTM A796/A796M : Practice for Structural Design of Corrugated Steel Pipe, Pipe Arches, and Arches for Stormand Sanitary Sewers and Other Buried Applications

 

• ASTM A797-82 : Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1990)

 

• ASTM A798/A798M : Practice for Installing Factory Made Corrugated Steel Pipe for Sewers and Other Applications

 

• ASTM A799/A799M : Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

 

• ASTM A8 : Withdrawn 1963 : Specification for Structural Nickel Steel

 

• ASTM A80 : Withdrawn 1927 : Specification for Cold Finished Carbon-Steel Bars and Shafting

 

• ASTM A800/A800M : Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

 

• ASTM A801 : Specification for Wrought Iron Cobalt High Magnetic Saturation Alloys (UNS R30005 andK92650)

 

• ASTM A802/A802M : Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

 

• ASTM A803/A803M : Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes

 

• ASTM A804/A804M : Test Methods for Alternating Current Magnetic Properties of Materials at Power FrequenciesUsing Sheet Type Test Specimens

 

• ASTM A805 : Specification for Steel, Flat Wire, Carbon, Cold Rolled

 

• ASTM A806/A806M- : Specification for 85 Percent Magnesia Block and Pipe Thermal Insulation (Withdrawn 1972)

 

• ASTM A807/A807M : Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and OtherApplications

 

• ASTM A808/A808M : Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steelof Structural Quality with Improved Notch Toughness (Withdrawn 2005) No Replacement

 

• ASTM A808/A808M-00a : Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness (Withdrawn 2005)

 

• ASTM A809 : Specification for Aluminum Coated (Aluminized) Carbon Steel Wire

 

• ASTM A81 : Withdrawn 1972 : Specification for Wrought Iron

 

• ASTM A810 : Specification for Zinc Coated (Galvanized) Steel Pipe Winding Mesh

 

• ASTM A811 : Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques

 

• ASTM A812/A812M-96 : Specification for Steel, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels (Withdrawn 1997)

 

• ASTM A813/A813M : Specification for Single or Double Welded Austenitic Stainless Steel Pipe

 

• ASTM A814/A814M : Specification for Cold Worked Welded Austenitic Stainless Steel Pipe

 

• ASTM A815/A815M : Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel PipingFittings

 

• ASTM A816/A816M-91 : Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, High-Strength, Low Alloy (Withdrawn 1994)

 

• ASTM A817 : Specification for Metallic Coated Steel Wire for Chain Link Fence Fabric and MarcelledTension Wire

 

• ASTM A818 : Specification for Coppered Carbon Steel Wire

 

• ASTM A819-90 : Specification for Steel Sheet, Aluminum-Coated Type 2 for Storm Sewer and Drainage Pipe (Withdrawn 1995)

 

• ASTM A82/A82M : Specification for Steel Wire, Plain, for Concrete Reinforcement

 

• ASTM A820/A820M : Specification for Steel Fibers for Fiber Reinforced Concrete

 

• ASTM A821/A821M : Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks

 

• ASTM A822/A822M : Specification for Seamless Cold Drawn Carbon Steel Tubing for Hydraulic System Service

 

• ASTM A823 : Specification for Statically Cast Permanent Mold Gray Iron Castings

 

• ASTM A824 : Specification for Metallic Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

 

• ASTM A825-84 : Specification for Steel Sheet, Composite Coated for Corrugated Steel Sewer Pipe and Bin Type Retaining Walls (Withdrawn 1990)

 

• ASTM A826/A826M : Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for LiquidMetal-Cooled Reactor Core Components (Withdrawn 2004) No Replacement

 

• ASTM A826/A826M-95(2001) : Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)

 

• ASTM A827/A827M : Specification for Plates, Carbon Steel, for Forging and Similar Applications

 

• ASTM A829/A829M : Specification for Alloy Structural Steel Plates

 

• ASTM A83 : Withdrawn 1967 : Specification for Seamless Carbon Steel Boiler Tubes

 

• ASTM A830/A830M : Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical CompositionRequirements

 

• ASTM A831/A831M : Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings forLiquid Metal Cooled Reactor Core Components (Withdrawn 2005) No Replacement

 

• ASTM A831/A831M-95(2000) : Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components (Withdrawn 2005)

 

• ASTM A832/A832M : Specification for Pressure Vessel Plates, Alloy Steel, Chromium Molybdenum Vanadium

 

• ASTM A833 : Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

 

• ASTM A834 : Specification for Common Requirements for Iron Castings for General Industrial Use

 

• ASTM A835 : Specification for Sizes of Ferroalloys and Alloy Additives

 

• ASTM A836/A836M : Specification for Titanium Stabilized Carbon Steel Forgings for Glass Lined Piping andPressure Vessel Service

 

• ASTM A837/A837M : Specification for Steel Forgings, Alloy, for Carburizing Applications

 

• ASTM A838 : Specification for Free Machining Ferritic Stainless Soft Magnetic Alloy Bar for RelayApplications

 

• ASTM A839 : Specification for Iron Phosphorus Powder Metallurgy (P/M) Parts for Soft MagneticApplications

 

• ASTM A84 : Withdrawn 1972 : Specification for Staybolt Wrought Iron, Solid

 

• ASTM A840/A840M : Specification for Fully Processed Magnetic Lamination Steel

 

• ASTM A840M-91(1996)e1 : Specification for Fully Processed Magnetic Lamination Steel (Metric) (Withdrawn 2000)

 

• ASTM A841/A841M : Specification for Steel Plates for Pressure Vessels, Produced by Thermo Mechanical ControlProcess (TMCP)

 

• ASTM A842 : Specification for Compacted Graphite Iron Castings

 

• ASTM A843-85 : Specification for Flat-Rolled, Grain-Oriented, High Permeability, Silicon-Iron Electrical Steel, Fully Processed, Types 27P066, 30P070, 35P076 (Withdrawn 1987)

 

• ASTM A844/A844M : Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the DirectQuenching Process

 

• ASTM A845 : Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel (Withdrawn2005) No Replacement

 

• ASTM A845-85(2000) : Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel (Withdrawn 2005)

 

• ASTM A846 : Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel (Withdrawn2005) No Replacement

 

• ASTM A846-85(2000) : Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel (Withdrawn 2005)

 

• ASTM A847/A847M : Specification for Cold Formed Welded and Seamless High Strength, Low Alloy StructuralTubing with Improved Atmospheric Corrosion Resistance

 

• ASTM A848 : Specification for Low Carbon Magnetic Iron

 

• ASTM A849 : Specification for Post Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer andDrainage Pipe

 

• ASTM A85 : Withdrawn 1953 : Specification for Common Iron Bars

 

• ASTM A850-85 : Specification for Steel Bars, Carbon Manganese Merchang Quality with 50 KSI (345 MPA) Yield Point (Withdrawn 1989)

 

• ASTM A851-96 : Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Withdrawn 2002)

 

• ASTM A852/A852M : Specification for Quenched and Tempered Low Alloy Structural Steel Plate with 70 ksi [485MPa] Minimum Yield Strength to 4 in. [100 mm] Thick

 

• ASTM A853 : Specification for Steel Wire, Carbon, for General Use

 

• ASTM A854/A854M : Specification for Metallic Coated Steel Smooth High Tensile Fence and Trellis Wire

 

• ASTM A855/A855M : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Steel Wire Strand

 

• ASTM A856/A856M : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Carbon Steel Wire

 

• ASTM A857/A857M : Specification for Steel Sheet Piling, Cold Formed, Light Gage

 

• ASTM A858/A858M : Specification for Heat Treated Carbon Steel Fittings for Low Temperature and CorrosiveService

 

• ASTM A859/A859M : Specification for Age Hardening Alloy Steel Forgings for Pressure Vessel Components

 

• ASTM A86 : Withdrawn 1963 : Specification for Staybolt Wrought Iron, Hollow-Rolled

 

• ASTM A860/A860M : Specification for Wrought High Strength Low Alloy Steel Butt Welding Fittings

 

• ASTM A861 : Specification for High Silicon Iron Pipe and Fittings

 

• ASTM A862/A862M : Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

 

• ASTM A863-86 : Specification for Corrugated Steel Pipe with Smooth PVC Liner for Seweres and Drains (Withdrawn 1990)

 

• ASTM A864/A864M-90 : Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997)

 

• ASTM A865 : Specification for Threaded Couplings, Steel, Black or Zinc Coated (Galvanized) Welded orSeamless, for Use in Steel Pipe Joints

 

• ASTM A866 : Specification for Medium Carbon Anti Friction Bearing Steel

 

• ASTM A867 : Specification for Iron Silicon Relay Steels

 

• ASTM A87 : Withdrawn 1947 : Specification for Mild to Medium-Strength Carbon-Steel Castings for General Application

 

• ASTM A871/A871M : Specification for High Strength Low Alloy Structural Steel Plate With Atmospheric CorrosionResistance

 

• ASTM A872/A872M : Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for CorrosiveEnvironments

 

• ASTM A873/A873M-87a(1993) : Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels (Withdrawn 1997)

 

• ASTM A874/A874M : Specification for Ferritic Ductile Iron Castings Suitable for Low Temperature Service

 

• ASTM A874M-89 : Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service [Metric] (Withdrawn 1999)

 

• ASTM A875/A875M : Specification for Steel Sheet, Zinc 5% Aluminum Alloy Coated by the Hot Dip Process

 

• ASTM A876 : Specification for Flat Rolled, Grain Oriented, Silicon Iron, Electrical Steel, Fully ProcessedTypes

 

• ASTM A876M-92 : Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types [Metric] (Withdrawn 1998)

 

• ASTM A877/A877M : Specification for Steel Wire, Chromium Silicon Alloy Valve Spring Quality

 

• ASTM A878/A878M : Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

 

• ASTM A879/A879M : Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for ApplicationsRequiring Designation of the Coating Mass on Each Surface

 

• ASTM A88 : Withdrawn 1933 : Specification for High-Test Gray-Iron Castings

 

• ASTM A880 : Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations forExamination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) NoReplacement

 

• ASTM A880-95 : Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004)

 

• ASTM A881/A881M : Specification for Steel Wire, Deformed, Stress Relieved or Low Relaxation for PrestressedConcrete Railroad Ties

 

• ASTM A882/A882M : Specification for Filled Epoxy Coated Seven Wire Prestressing Steel Strand

 

• ASTM A883/A883M : Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of NonmetallicMagnetic Materials

 

• ASTM A884/A884M : Specification for Epoxy Coated Steel Wire and Welded Wire Reinforcement

 

• ASTM A885/A885M : Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated SteelSewer, Culvert, and Underdrain Pipe

 

• ASTM A886/A886M : Specification for Steel Strand, Indented, Seven Wire Stress Relieved for PrestressedConcrete

 

• ASTM A887 : Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

 

• ASTM A888 : Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

 

• ASTM A889/A889M : Test Method for Alternating Current Magnetic Properties of Materials at Low InductionsUsing the Wattmeter Varmeter Ammeter Voltmeter Method and 25 cm (250 mm) Epstein Frame

 

• ASTM A89 : 43 Withdrawn 1947 : Specification for Low-Tensile Strength Steel Plates of Flange Carbon-Qualities and Firebox

 

• ASTM A890/A890M : Specification for Castings, Iron Chromium Nickel Molybdenum Corrosion Resistant, Duplex(Austenitic/Ferritic) for General Application

 

• ASTM A891 : Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine RotorDisks and Wheels

 

• ASTM A893/A893M : Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials atMicrowave Frequencies

 

• ASTM A894/A894M : Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

 

• ASTM A895 : Specification for Free Machining Stainless Steel Plate, Sheet, and Strip

 

• ASTM A896 : Practice for Conducting Case Studies on Galvanized Structures

 

• ASTM A897/A897M : Specification for Austempered Ductile Iron Castings

 

• ASTM A897M-90(1997) : Specification for Austempered Ductile Iron Castings [Metric] (Withdrawn 2001)

 

• ASTM A898/A898M : Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

 

• ASTM A899 : Specification for Steel Wire, Epoxy Coated

 

• ASTM A9 : Withdrawn 1940 : Specification for Steel for Buildings

 

• ASTM A900/A900M : Test Method for Lamination Factor of Amorphous Magnetic Strip

 

• ASTM A900-91(1996)e1 : Test Method for Lamination Factor of Amorphous Magnetic Strip (Withdrawn)

 

• ASTM A901 : Specification for Amorphous Magnetic Core Alloys, Semi Processed Types

 

• ASTM A903/A903M : Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and LiquidPenetrant Inspection

 

• ASTM A904 : Specification for 50 Nickel 50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts

 

• ASTM A905 : Specification for Steel Wire, Pressure Vessel Winding

 

• ASTM A906/A906M : Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

 

• ASTM A907/A907M-96 : Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, Structural Quality (Withdrawn 2001)

 

• ASTM A908 : Specification for Stainless Steel Needle Tubing

 

• ASTM A909 : Specification for Steel Forgings, Microalloy, for General Industrial Use

 

• ASTM A91 : Withdrawn 1940 : Methods of Determining Weight of Casting on Tin, Terne, and Lead-Coated Sheets

 

• ASTM A910/A910M : Specification for Uncoated, Weldless, 2 and 3 Wire Steel Strand for Prestressed Concrete

 

• ASTM A911/A911M : Specification for Uncoated, Stress Relieved Steel Bars for Prestressed Concrete Ties

 

• ASTM A912/A912M : Test Method for Alternating Current Magnetic Properties of Amorphous Materials at PowerFrequencies Using Wattmeter Ammeter Voltmeter Method with Toroidal Specimens

 

• ASTM A913/A913M : Specification for High Strength Low Alloy Steel Shapes of Structural Quality, Produced byQuenching and Self Tempering Process (QST)

 

• ASTM A914/A914M : Specification for Steel Bars Subject to Restricted End Quench Hardenability Requirements

 

• ASTM A915/A915M : Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar toStandard Wrought Grades

 

• ASTM A916-93 : Specification for Steel Sheet, Zinc-5% Aluminum-Mischmetal Alloy-Coated by Hot-Dip Process for Storm Sewer and Drainage Pipe (Withdrawn 1995)

 

• ASTM A917 : Specification for Steel Sheet, Coated by the Electrolytic Process for Applications RequiringDesignation of the Coating Mass on Each Surface (General Requirements)

 

• ASTM A918 : Specification for Steel Sheet, Zinc Nickel Alloy Coated by the Electrolytic Process forApplications Requiring Designation of the Coating Mass on Each Surface

 

• ASTM A919-84(1993)e1 : Terminology Relating to Heat Treatment of Metals (Withdrawn 1999)

 

• ASTM A92 : Withdrawn 1937 : Specification for High-Speed Tool Steel

 

• ASTM A920/A920M : Specification for Steel Bars, Microalloy, Hot Wrought, Special Quality, Mechanical Properties

 

• ASTM A921/A921M : Specification for Steel Bars, Microalloy, Hot Wrought, Special Quality, for Subsequent HotForging

 

• ASTM A922 : Specification for Silicon Metal

 

• ASTM A924/A924M : Specification for General Requirements for Steel Sheet, Metallic Coated by the Hot DipProcess

 

• ASTM A925 : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Steel Overhead Ground WireStrand

 

• ASTM A926 : Test Method for Comparing the Abrasion Resistance of Coating Materials for CorrugatedMetal Pipe

 

• ASTM A927/A927M : Test Method for Alternating Current Magnetic Properties of Toroidal Core Specimens Usingthe Voltmeter Ammeter Wattmeter Method

 

• ASTM A928/A928M : Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded withAddition of Filler Metal

 

• ASTM A929/A929M : Specification for Steel Sheet, Metallic Coated by the Hot Dip Process for Corrugated SteelPipe

 

• ASTM A93 : Withdrawn 1965 : Specification for Zinc-Coated Galvanized Iron or Steel Sheets, Boils, and Butt Lengths

 

• ASTM A930 : Practice for Life Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, StormSewers, and Other Buried Conduits

 

• ASTM A931 : Test Method for Tension Testing of Wire Ropes and Strand

 

• ASTM A932/A932M : Test Method for Alternating Current Magnetic Properties of Amorphous Materials at PowerFrequencies Using Wattmeter Ammeter Voltmeter Method with Sheet Specimens

 

• ASTM A933/A933M : Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement

 

• ASTM A934/A934M : Specification for Epoxy Coated Prefabricated Steel Reinforcing Bars

 

• ASTM A935/A935M-97a : Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled (Withdrawn 2001)

 

• ASTM A936/A936M-97a : Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability (Withdrawn 2001)

 

• ASTM A937/A937M : Test Method for Determining Interlaminar Resistance of Insulating Coatings Using TwoAdjacent Test Surfaces

 

• ASTM A938 : Test Method for Torsion Testing of Wire

 

• ASTM A939 : Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

 

• ASTM A94 : Withdrawn 1966 : Specification for High Strength Structural steel

 

• ASTM A940 : Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, forTurbine Rotors

 

• ASTM A942 : Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion Resistant RollShells

 

• ASTM A943/A943M : Specification for Spray Formed Seamless Austenitic Stainless Steel Pipes

 

• ASTM A944 : Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using BeamEnd Specimens

 

• ASTM A945/A945M : Specification for High Strength Low Alloy Structural Steel Plate with Low Carbon andRestricted Sulfur for Improved Weldability, Formability, and Toughness

 

• ASTM A946 : Specification for Chromium, Chromium Nickel and Silicon Alloy Steel Plate, Sheet, and Stripfor Corrosion and Heat Resisting Service

 

• ASTM A947M : Specification for Textured Stainless Steel Sheet [Metric]

 

• ASTM A949/A949M : Specification for Spray Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

 

• ASTM A95 : Withdrawn 1957 : Specification for Carbon-Steel Castings for Valves, Flanges, and Fittings for High-Temperature Service

 

• ASTM A950/A950M : Specification for Fusion Bonded Epoxy Coated Structural Steel H Piles and Sheet Piling

 

• ASTM A951 : Specification for Masonry Joint Reinforcement

 

• ASTM A952/A952M : Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and WeldedAttachment Links

 

• ASTM A953 : Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing(Withdrawn 2004) No Replacement

 

• ASTM A953-02 : Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing (Withdrawn 2004)

 

• ASTM A954 : Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe(Withdrawn 2005) No Replacement

 

• ASTM A954-02 : Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe (Withdrawn 2005)

 

• ASTM A955/A955M : Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

 

• ASTM A956 : Test Method for Leeb Hardness Testing of Steel Products

 

• ASTM A957 : Specification for Investment Castings, Steel and Alloy, Common Requirements, for GeneralIndustrial Use

 

• ASTM A958 : Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, ChemicalRequirements Similar to Standard Wrought Grades

 

• ASTM A959 : Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

 

• ASTM A96 : Withdrawn 1965 : Specification for Alloy-Steel Bolting Material for High-Temperature Service

 

• ASTM A960/A960M : Specification for Common Requirements for Wrought Steel Piping Fittings

 

• ASTM A961/A961M : Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Partsfor Piping Applications

 

• ASTM A962/A962M : Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both,

 

• ASTM A963/A963M-97 : Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)

 

• ASTM A964/A964M : Specification for Corrugated Steel Box Culverts

 

• ASTM A965/A965M : Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

 

• ASTM A966/A966M : Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

 

• ASTM A967 : Specification for Chemical Passivation Treatments for Stainless Steel Parts

 

• ASTM A968/A968M : Specification for Chromium, Chromium Nickel, and Silicon Alloy Steel Bars and Shapes forCorrosion and Heat Resisting Service

 

• ASTM A969/A969M-97 : Specification for Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled (Withdrawn 2000)

 

• ASTM A97 : Withdrawn 1935 : Specification for Tungsten Powder

 

• ASTM A970/A970M : Specification for Headed Steel Bars for Concrete Reinforcement

 

• ASTM A971/A971M : Test Method for Measuring Edge Taper and Crown of Flat Rolled Electrical Steel Coils

 

• ASTM A972/A972M : Specification for Fusion Bonded Epoxy Coated Pipe Piles

 

• ASTM A973/A973M : Specification for Grade 100 Alloy Steel Chain

 

• ASTM A974 : Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated orPolyvinyl Chloride (PVC) Coated)

 

• ASTM A975 : Specification for Double Twisted Hexagonal Mesh Gabions and Revet Mattresses (MetallicCoated Steel Wire or Metallic Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

 

• ASTM A976 : Classification of Insulating Coatings by Composition, Relative Insulating Ability andApplication

 

• ASTM A977/A977M : Test Method for Magnetic Properties of High Coercivity Permanent Magnet Materials UsingHysteresigraphs

 

• ASTM A978/A978M : Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for GravityFlow Sanitary Sewers, Storm Sewers, and Other Special Applications

 

• ASTM A979/A979M : Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures inthe Field

 

• ASTM A98 : Withdrawn 1992 : Specification for Spiegeleisen

 

• ASTM A980 : Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

 

• ASTM A981 : Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing SteelStrand, Grade 270, Uncoated, Used in Prestressed Ground Anchors

 

• ASTM A982/A982M : Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

 

• ASTM A983/A983M : Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts forMedium Speed Diesel Engines

 

• ASTM A984/A984M : Specification for Steel Line Pipe, Black, Plain End, Electric Resistance Welded

 

• ASTM A985/A985M : Specification for Steel Investment Castings General Requirements, for Pressure ContainingParts

 

• ASTM A986/A986M : Specification for Magnetic Particle Examination of Continuous Grain Flow CrankshaftForgings

 

• ASTM A987 : Test Method for Measuring Shape Characteristics of Tin Mill Products

 

• ASTM A988/A988M : Specification for Hot Isostatically Pressed Stainless Steel Flanges, Fittings, Valves, and Partsfor High Temperature Service

 

• ASTM A989/A989M : Specification for Hot Isostatically Pressed Alloy Steel Flanges, Fittings, Valves, and Parts forHigh Temperature Service

 

• ASTM A99 : Specification for Ferromanganese

 

• ASTM A990 : Specification for Castings, Iron Nickel Chromium and Nickel Alloys, Specially Controlled forPressure Retaining Parts for Corrosive Service

 

• ASTM A991/A991M : Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to HeatTreat Steel Products

 

• ASTM A992/A992M : Specification for Structural Steel Shapes

 

• ASTM A993 : Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature(Withdrawn 2004) No Replacement

 

• ASTM A993-98 : Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature (Withdrawn 2004)

 

• ASTM A994 : Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

 

• ASTM A995/A995M : Specification for Castings, Austenitic Ferritic (Duplex) Stainless Steel, for PressureContaining Parts

 

• ASTM A995-98 : Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

 

• ASTM A996/A996M : Specification for Rail Steel and Axle Steel Deformed Bars for Concrete Reinforcement

 

• ASTM A997 : Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

 

• ASTM A998/A998M : Practice for Structural Design of Reinforcements for Fittings in Factory/Made CorrugatedSteel Pipe for Sewers and Other Applications

 

• ASTM A999/A999M : Specification for General Requirements for Alloy and Stainless Steel Pipe