ASTM B XXXX

ASTM B0001-01 : Specification for Hard-Drawn Copper Wire

ASTM B0002-00 : Specification for Medium-Hard-Drawn Copper Wire

ASTM B0003-01 : Specification for Soft or Annealed Copper Wire

ASTM B0005-00 : Specification for High Conductivity Tough-Pitch Copper Refinery Shapes

ASTM B0006-03 : Specification for Zinc

ASTM B0008-04 : Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

ASTM B0009-90R03 : Specification for Bronze Trolley Wire

ASTM B0016/B0016M-00 : Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

ASTM B0019-01 : Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

ASTM B0021/B0021M-01E01 : Specification for Naval Brass Rod, Bar, and Shapes

ASTM B0022-02 : Specification for Bronze Castings for Bridges and Turntables

ASTM B0023-00 : Specification for White Metal Bearing Alloys (Known Commercially as |P`Babbitt Metal|P’)

ASTM B0026/B0026M-03 : Specification for Aluminum-Alloy Sand Castings

ASTM B0029-03 : Specification for Refined Lead

ASTM B0030-04 : Specification for Copper Alloys in Ingot Form

ASTM B0032-04 : Specification for Solder Metal

ASTM B0033-04 : Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes

ASTM B0036/B0036M-01 : Specification for Brass Plate, Sheet, Strip, And Rolled Bar

ASTM B0037-03 : Specification for Aluminum for Use in Iron and Steel Manufacture

ASTM B0039-79R04 : Specification for Nickel

ASTM B0042-02E01 : Specification for Seamless Copper Pipe, Standard Sizes

ASTM B0043-98R04 : Specification for Seamless Red Brass Pipe, Standard Sizes

ASTM B0047-95AR01 : Specification for Copper Trolley Wire

ASTM B0048-00 : Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

ASTM B0049-98R04 : Specification for Copper Rod Drawing Stock for Electrical Purposes

ASTM B0061-02 : Specification for Steam or Valve Bronze Castings

ASTM B0062-02 : Specification for Composition Bronze or Ounce Metal Castings

ASTM B0063-90R01 : Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials

ASTM B0066-95R03 : Specification for Bronze Castings for Steam Locomotive Wearing Parts

ASTM B0067 : Specification for Car and Tender Journal Bearings, Lined

ASTM B0068-02 : Specification for Seamless Copper Tube, Bright Annealed

ASTM B0068M-99 : Specification for Seamless Copper Tube, Bright Annealed [Metric]

ASTM B0069-01A : Specification for Rolled Zinc

ASTM B0070-90R01 : Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating

ASTM B0075-02 : Specification for Seamless Copper Tube

ASTM B0075M-99 : Specification for Seamless Copper Tube [Metric]

ASTM B0076-90R01 : Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

ASTM B0077-81R01 : Test Method for Thermoelectric Power of Electrical-Resistance Alloys

ASTM B0078-90R01 : Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

ASTM B0080-01E01 : Specification for Magnesium-Alloy Sand Castings

ASTM B0084-90R01 : Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

ASTM B0085-03 : Specification for Aluminum-Alloy Die Castings

ASTM B0086-04E01 : Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

ASTM B0088-03 : Specification for Seamless Copper Water Tube

ASTM B0088M-03 : Specification for Seamless Copper Water Tube [Metric]

ASTM B0090/B0090M-98R05 : Specification for Magnesium-Alloy Sheet and Plate

ASTM B0091-97R04 : Specification for Magnesium-Alloy Forgings

ASTM B0092/B0092M-01 : Specification for Unalloyed Magnesium Ingot and Stick For Remelting

ASTM B0093/B0093M-04 : Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

ASTM B0094-05 : Specification for Magnesium-Alloy Die Castings

ASTM B0096/B0096M-01 : Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels

ASTM B0098/B0098M-03 : Specification for Copper-Silicon Alloy Rod, Bar and Shapes

ASTM B0099/B0099M-01 : Specification for Copper-Silicon Alloy Wire for General Applications

ASTM B0100-03A : Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

ASTM B0101-02 : Specification for Lead-Coated Copper Sheet and Strip for Building Construction

ASTM B0102-00 : Specification for Lead- and Tin-Alloy Die Castings

ASTM B0103/B0103M-04 : Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

ASTM B0105-00 : Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

ASTM B0106-96R02E01 : Test Methods for Flexivity of Thermostat Metals

ASTM B0107/B0107M-00 : Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

ASTM B0108-03A : Specification for Aluminum-Alloy Permanent Mold Castings

ASTM B0111/B0111M-04 : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

ASTM B0111M : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric]

ASTM B0114-90R01 : Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

ASTM B0115-00R04 : Specification for Electrolytic Copper Cathode

ASTM B0116-95R01 : Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage

ASTM B0117-03 : Practice for Operating Salt Spray (Fog) Apparatus

ASTM B0121/B0121M-01 : Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

ASTM B0122/B0122M-01 : Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B0124/B0124M-04 : Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

ASTM B0127-98 : Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

ASTM B0129-02 : Specification for Cartridge Brass Cartridge Case Cups

ASTM B0130-02 : Specification for Commercial Bronze Strip for Bullet Jackets

ASTM B0131-02 : Specification for Copper Alloy Bullet Jacket Cups

ASTM B0134/B0134M-01 : Specification for Brass Wire

ASTM B0135-02 : Specification for Seamless Brass Tube

ASTM B0135M-00E01 : Specification for Seamless Brass Tube [Metric]

ASTM B0136-84R03 : Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

ASTM B0137-95R04 : Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

ASTM B0138/B0138M-01 : Specification for Manganese Bronze Rod, Bar, and Shapes

ASTM B0139/B0139M-01 : Specification for Phosphor Bronze Rod, Bar, and Shapes

ASTM B0140/B0140M-01 : Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

ASTM B0148-97R03E01 : Specification for Aluminum-Bronze Sand Castings

ASTM B0150/B0150M-03 : Specification for Aluminum Bronze Rod, Bar, and Shapes

ASTM B0150M : Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric]

ASTM B0151/B0151M-00 : Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

ASTM B0152/B0152M-00 : Specification for Copper Sheet, Strip, Plate, and Rolled Bar

ASTM B0153-91R03E01 : Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

ASTM B0154-01 : Test Method for Mercurous Nitrate Test for Copper and Copper Alloys

ASTM B0159/B0159M-01 : Specification for Phosphor Bronze Wire

ASTM B0160-99 : Specification for Nickel Rod and Bar

ASTM B0161-03 : Specification for Nickel Seamless Pipe and Tube

ASTM B0162-99 : Specification for Nickel Plate, Sheet, and Strip

ASTM B0163-04 : Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASTM B0164-03 : Specification for Nickel-Copper Alloy Rod, Bar, and Wire

ASTM B0165-93R03E01 : Specification of Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

ASTM B0166-04 : Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire

ASTM B0167-01 : Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube

ASTM B0168-01 : Specification Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip

ASTM B0169/B0169M-01 : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

ASTM B0170-99R04 : Specification for Oxygen-Free Electrolytic Copper\MRefinery Shapes

ASTM B0171/B0171M-04E01 : Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

ASTM B0172-01A : Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

ASTM B0173-01A : Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

ASTM B0174-02 : Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

ASTM B0176-04 : Specification for Copper-Alloy Die Castings

ASTM B0177-01 : Guide for Engineering Chromium Electroplating

ASTM B0179-03 : Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

ASTM B0183-79R04E01 : Practice for Preparation of Low-Carbon Steel for Electroplating

ASTM B0187/B0187M-03 : Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

ASTM B0187M : Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric]

ASTM B0188-02 : Specification for Seamless Copper Bus Pipe and Tube

ASTM B0189 : Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

ASTM B0193-02 : Test Method for Resistivity of Electrical Conductor Materials

ASTM B0194-01E01 : Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B0196/B0196M-03 : Specification for Copper-Beryllium Alloy Rod and Bar

ASTM B0197/B0197M-01 : Specification for Copper-Beryllium Alloy Wire

ASTM B0199-99R05 : Specification for Magnesium-Alloy Permanent Mold Castings

ASTM B0200-85R04 : Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

ASTM B0201-80R04 : Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

ASTM B0206/B0206M-97R02 : Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

ASTM B0208-04 : Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

ASTM B0209-04 : Specification for Aluminum and Aluminum-Alloy Sheet and Plate

ASTM B0209M-04 : Specification for Aluminum and Aluminum-Alloy Sheet and Plate \[Metric\]

ASTM B0210-04 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

ASTM B0210M-05 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes \[Metric\]

ASTM B0211-03 : Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

ASTM B0211M-03 : Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire \[Metric\]

ASTM B0212-99 : Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

ASTM B0213-03 : Test Method for Flow Rate of Metal Powders

ASTM B0214-99 : Test Method for Sieve Analysis of Metal Powders

ASTM B0215-04 : Practices for Sampling Metal Powders

ASTM B0216-97R03 : Specification for Tough-Pitch Fire-Refined Copper\MRefinery Shapes

ASTM B0221-05 : Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

ASTM B0221M-05 : Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes \[Metric\]

ASTM B0223-03 : Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

ASTM B0224-04 : Classification of Coppers

ASTM B0226-04 : Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors

ASTM B0227-04 : Specification for Hard-Drawn Copper-Clad Steel Wire

ASTM B0228-04 : Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

ASTM B0229-04 : Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors

ASTM B0230/B0230M-99R04 : Specification for Aluminum 1350\NH19 Wire for Electrical Purposes

ASTM B0231/B0231M-04 : Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

ASTM B0232/B0232M-01E01 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

ASTM B0233-97R03E01 : Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

ASTM B0234-04 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

ASTM B0234M-04 : Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers \[Metric\]

ASTM B0236-00 : Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

ASTM B0236M-00 : Specification for Aluminum Bars for Electrical Purposes (Bus Bars) \[Metric\]

ASTM B0237-01 : Specification for Refined Antimony

ASTM B0240-04 : Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

ASTM B0241/B0241M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

ASTM B0242-99R04E01 : Guide for Preparation of High-Carbon Steel for Electroplating

ASTM B0243-05 : Terminology of Powder Metallurgy

ASTM B0244-97R02 : Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

ASTM B0246-00 : Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes

ASTM B0247-02A : Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

ASTM B0247M-02A : Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings \[Metric\]

ASTM B0248-01E01 : Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B0248M-01E01 : Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar [Metric]

ASTM B0249/B0249M-04 : Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

ASTM B0250/B0250M-01 : Specification for General Requirements for Wrought Copper Alloy Wire

ASTM B0251-02E01 : Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

ASTM B0251M-97R03 : Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

ASTM B0252-92R04 : Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

ASTM B0253-87R99E01 : Guide for Preparation of Aluminum Alloys for Electroplating

ASTM B0254-92R04E01 : Practice for Preparation of and Electroplating on Stainless Steel

ASTM B0258-02 : Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

ASTM B0263-04 : Test Method for Determination of Cross-Sectional Area of Stranded Conductors

ASTM B0265-05 : Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B0267-90R01 : Specification for Wire for Use In Wire-Wound Resistors

ASTM B0271-96R03 : Specification for Copper-Base Alloy Centrifugal Castings

ASTM B0272-02 : Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

ASTM B0275-04 : Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought

ASTM B0276-91R00 : Test Method for Apparent Porosity in Cemented Carbides

ASTM B0277-95R01 : Test Method for Hardness of Electrical Contact Materials

ASTM B0279-04 : Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

ASTM B0280-03 : Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

ASTM B0281-88R01 : Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

ASTM B0283-04 : Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

ASTM B0286-02 : Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

ASTM B0294-92R01 : Test Method for Hardness Testing of Cemented Carbides

ASTM B0296-03 : Practice for Temper Designations of Magnesium Alloys, Cast and Wrought

ASTM B0298-99E01 : Specification for Silver-Coated Soft or Annealed Copper Wire

ASTM B0299-01 : Specification for Titanium Sponge

ASTM B0301/B0301M-04 : Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

ASTM B0302-02 : Specification for Threadless Copper Pipe, Standard Sizes

ASTM B0306-02 : Specification for Copper Drainage Tube (DWV)

ASTM B0308/B0308M-02 : Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

ASTM B0311-93R02E01 : Test Method for Density Determination for Powder Metallurgy (P/M) Materials Containing Less Than Two Percent Porosity

ASTM B0312-96R02 : Test Method for Green Strength for Compacted Metal Powder Specimens

ASTM B0313/B0313M-02E01 : Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

ASTM B0315-99 : Specification for Seamless Copper Alloy Pipe and Tube

ASTM B0316/B0316M-02 : Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

ASTM B0317/B0317M-04 : Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor)

ASTM B0319-91R04 : Guide for Preparation of Lead and Lead Alloys for Electroplating

ASTM B0320-60R03E01 : Practice for Preparation of Iron Castings for Electroplating

ASTM B0322-99R04 : Guide for Cleaning Metals Prior to Electroplating

ASTM B0324-01 : Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

ASTM B0327-01E02 : Specification for Master Alloys Used in Making Zinc Die Casting Alloys

ASTM B0328-96R03 : Test Method for Density, Oil Content, and Interconnected Porosity of Sintered Metal Structural Parts and Oil-Impregnated Bearings

ASTM B0329-98R03E01 : Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

ASTM B0330-02 : Test Method for Fisher Number of Metal Powders and Related Compounds

ASTM B0331-95R02 : Test Method for Compressibility of Metal Powders in Uniaxial Compaction

ASTM B0333-03 : Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

ASTM B0335-03 : Specification for Nickel-Molybdenum Alloy Rod

ASTM B0338-05A : Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

ASTM B0339-00 : Specification for Pig Tin

ASTM B0341/B0341M-02 : Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)

ASTM B0343-92AR04E01 : Practice for Preparation of Nickel for Electroplating with Nickel

ASTM B0344-01 : Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

ASTM B0345/B0345M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

ASTM B0348-05 : Specification for Titanium and Titanium Alloy Bars and Billets

ASTM B0349/B0349M-03 : Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

ASTM B0350/B0350M-02 : Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

ASTM B0351/B0351M-02 : Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

ASTM B0352/B0352M-02 : Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

ASTM B0353-02 : Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

ASTM B0354-98 : Terminology Relating to Uninsulated Metallic Electrical Conductors

ASTM B0355-95R03 : Specification for Nickel-Coated Soft or Annealed Copper Wire

ASTM B0359/B0359M-02 : Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

ASTM B0359M : Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric]

ASTM B0360-01 : Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

ASTM B0361-02 : Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

ASTM B0362-91R03 : Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal

ASTM B0363-04 : Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

ASTM B0364-96R02 : Specification for Tantalum and Tantalum Alloy Ingots

ASTM B0365-98R04 : Specification for Tantalum and Tantalum Alloy Rod and Wire

ASTM B0366-04B : Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

ASTM B0367-93R04 : Specification for Titanium and Titanium Alloy Castings

ASTM B0368-97R03E01 : Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

ASTM B0369-96R03 : Specification for Copper-Nickel Alloy Castings

ASTM B0370-03 : Specification for Copper Sheet and Strip for Building Construction

ASTM B0371/B0371M-02 : Specification for Copper-Zinc-Silicon Alloy Rod

ASTM B0372-97R03 : Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

ASTM B0373-00 : Specification for Aluminum Foil for Capacitors

ASTM B0374-96R03 : Terminology Relating to Electroplating

ASTM B0379-04 : Specification for Phosphorized Coppers\MRefinery Shapes

ASTM B0380-97R02 : Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

ASTM B0381-05 : Specification for Titanium and Titanium Alloy Forgings

ASTM B0386-03 : Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, and Foil

ASTM B0387-90R01 : Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

ASTM B0388-00 : Specification for Thermostat Metal Sheet and Strip

ASTM B0389-81R04 : Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

ASTM B0390-92R00 : Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides

ASTM B0391-03 : Specification for Niobium and Niobium Alloy Ingots

ASTM B0392-03 : Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

ASTM B0393-03 : Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

ASTM B0394-03 : Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

ASTM B0395/B0395M-02 : Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

ASTM B0395M : Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric]

ASTM B0396 : Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes

ASTM B0397 : Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors

ASTM B0398/B0398M-02 : Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes

ASTM B0399/B0399M-04 : Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

ASTM B0400-04 : Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

ASTM B0401-04 : Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

ASTM B0403-02 : Specification for Magnesium-Alloy Investment Castings

ASTM B0404/B0404M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins

ASTM B0406-96R00 : Test Method for Transverse Rupture Strength of Cemented Carbides

ASTM B0407-04 : Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASTM B0408-01 : Specification for Nickel-Iron-Chromium Alloy Rod and Bar

ASTM B0409-01 : Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

ASTM B0411/B0411M-01 : Specification for Copper-Nickel-Silicon Alloy Rod and Bar

ASTM B0413-97AR03 : Specification for Refined Silver

ASTM B0415-98R02 : Specification for Hard-Drawn Aluminum-Clad Steel Wire

ASTM B0416-98R02 : Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

ASTM B0417-00 : Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

ASTM B0418-01 : Specification for Cast and Wrought Galvanic Zinc Anodes

ASTM B0422-04 : Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

ASTM B0423-03 : Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube

ASTM B0424-98A : Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip

ASTM B0425-99 : Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Rod and Bar

ASTM B0427-02 : Specification for Gear Bronze Alloy Castings

ASTM B0428-93R04 : Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

ASTM B0429-02 : Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

ASTM B0430-97R01 : Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry

ASTM B0432-04 : Specification for Copper and Copper Alloy Clad Steel Plate

ASTM B0434-00 : Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

ASTM B0435-03 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

ASTM B0438/B0438M-04 : Specification for Sintered Bronze Bearings (Oil-Impregnated)

ASTM B0439-00E01 : Specification for Iron-Base Sintered Bearings (Oil-Impregnated)

ASTM B0440-00 : Specification for Cadmium

ASTM B0441-04 : Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

ASTM B0443-00E01 : Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNSN06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

ASTM B0444-04 : Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

ASTM B0446-03 : Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar

ASTM B0447-02 : Specification for Welded Copper Tube

ASTM B0449-93R04 : Specification for Chromates on Aluminum

ASTM B0452-02 : Specification for Copper-Clad Steel Wire for Electronic Application

ASTM B0453/B0453M-01 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

ASTM B0455-01 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

ASTM B0456-03 : Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

ASTM B0457-67R03 : Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

ASTM B0462-04 : Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675,

ASTM B0463-04 : Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip

ASTM B0464-04 : Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe

ASTM B0465-04 : Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B0466/B0466M-03 : Specification for Seamless Copper-Nickel Pipe and Tube

ASTM B0467-88R03 : Specification for Welded Copper-Nickel Pipe

ASTM B0468-04 : Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes

ASTM B0470-02 : Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment

ASTM B0472-04A : Specification for Nickel Alloy Billets and Bars for Reforging

ASTM B0473-96R02E01 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

ASTM B0474-03 : Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

ASTM B0475-96R02E01 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

ASTM B0476-01 : Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

ASTM B0477-97R02 : Specification for Gold-Silver-Nickel Electrical Contact Alloy

ASTM B0478-85R03 : Test Method for Cross Curvature of Thermostat Metals

ASTM B0479-00 : Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications

ASTM B0480-88R01 : Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

ASTM B0481-68R03E01 : Practice for Preparation of Titanium and Titanium Alloys for Electroplating

ASTM B0482-85R03 : Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

ASTM B0483/B0483M-03 : Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications

ASTM B0487-85R02 : Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section

ASTM B0488-01 : Specification for Electrodeposited Coatings of Gold for Engineering Uses

ASTM B0489-85R03 : Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

ASTM B0490-92R03 : Practice for Micrometer Bend Test for Ductility of Electrodeposits

ASTM B0491/B0491M-00 : Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

ASTM B0493-01R03 : Specification for Zirconium and Zirconium Alloy Forgings

ASTM B0494/B0494M-03 : Specification for Primary Zirconium

ASTM B0495-01 : Specification for Zirconium and Zirconium Alloy Ingots

ASTM B0496-04 : Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

ASTM B0497-00 : Guide for Measuring Voltage Drop on Closed Arcing Contacts

ASTM B0498/B0498M-98R02 : Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

ASTM B0499-96R02 : Test Method for Measurement of Coating Thicknesses by the Magnetic Method : Nonmagnetic Coatings on Magnetic Basis Metals

ASTM B0500/B0500M-98R02 : Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)

ASTM B0501-04 : Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

ASTM B0502-02 : Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced

ASTM B0504-90R02 : Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

ASTM B0505/B0505M-04 : Specification for Copper Alloy Continuous Castings

ASTM B0507-86R03 : Practice for Design of Articles to Be Electroplated on Racks

ASTM B0508-97R03 : Specification for Copper Alloy Strip for Flexible Metal Hose

ASTM B0511-01 : Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

ASTM B0512-04 : Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

ASTM B0514-95R02E01 : Specification for Welded Nickel-Iron-Chromium Alloy Pipe

ASTM B0515-95R02 : Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes

ASTM B0516-03 : Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Tubes

ASTM B0517-03 : Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

ASTM B0520-93R02E01 : Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application

ASTM B0521-98R04 : Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

ASTM B0522-01 : Specification for Gold-Silver-Platinum Electrical Contact Alloy

ASTM B0523/B0523M-02 : Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

ASTM B0524/B0524M-99 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

ASTM B0527-93R00E01 : Test Method for Determination of Tap Density of Metallic Powders and Compounds

ASTM B0528-99 : Test Method for Transverse Rupture Strength of Metal Powder Specimens

ASTM B0530-02 : Test Method for Measurement of Coating Thicknesses by the Magnetic Method : Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

ASTM B0531 : Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes

ASTM B0532-85R02 : Specification for Appearance of Electroplated Plastic Surfaces

ASTM B0533-85R04 : Test Method for Peel Strength of Metal Electroplated Plastics

ASTM B0534-01 : Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B0535-04 : Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

ASTM B0536-02 : Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

ASTM B0537-70R02 : Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

ASTM B0539-02E01 : Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

ASTM B0540-97R02 : Specification for Palladium Electrical Contact Alloy

ASTM B0541-01 : Specification for Gold Electrical Contact Alloy

ASTM B0542-04 : Terminology Relating to Electrical Contacts and Their Use

ASTM B0543-96R03 : Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

ASTM B0545-97R04E01 : Specification for Electrodeposited Coatings of Tin

ASTM B0546-04 : Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS

ASTM B0547/B0547M-02 : Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

ASTM B0548-03 : Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels

ASTM B0549-04 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)

ASTM B0550/B0550M-02 : Specification for Zirconium and Zirconium Alloy Bar and Wire

ASTM B0551/B0551M-04 : Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

ASTM B0552-98R04 : Specification for Seamless and Welded Copper\NNickel Tubes for Water Desalting Plants

ASTM B0555-86R02 : Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the Dropping Test

ASTM B0556-90R02 : Guide for Measurement of Thin Chromium Coatings by Spot Test

ASTM B0557-02A : Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

ASTM B0557M-02A : Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products \[Metric\]

ASTM B0558-79R03 : Practice for Preparation of Nickel Alloys for Electroplating

ASTM B0559-93R02E01 : Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application

ASTM B0560-00 : Specification for Modern Pewter Alloys

ASTM B0561-94R99E01 : Specification for Refined Platinum

ASTM B0562-95R99 : Specification for Refined Gold

ASTM B0563-01 : Specification for Palladium-Silver-Copper Electrical Contact Alloy

ASTM B0564-04 : Specification for Nickel Alloy Forgings

ASTM B0565-04 : Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

ASTM B0566-04A : Specification for Copper-Clad Aluminum Wire

ASTM B0567-98R03 : Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

ASTM B0568-98R04 : Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

ASTM B0569-04 : Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

ASTM B0570-01 : Specification for Copper-Beryllium Alloy (UNS No. C17000 and C17200) Forgings and Extrusions

ASTM B0571-97R03 : Practice for Qualitative Adhesion Testing of Metallic Coatings

ASTM B0572-03 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

ASTM B0573-00 : Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

ASTM B0574-05 : Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-

ASTM B0575-04 : Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-

ASTM B0576-94R99 : Guide for Arc Erosion Testing of Electrical Contact Materials

ASTM B0577-93R04E01 : Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

ASTM B0578-87R04 : Test Method for Microhardness of Electroplated Coatings

ASTM B0579-73R04 : Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

ASTM B0580-79R04 : Specification for Anodic Oxide Coatings on Aluminum

ASTM B0581-02 : Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

ASTM B0582-02 : Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

ASTM B0584-04 : Specification for Copper Alloy Sand Castings for General Applications

ASTM B0587-97R03 : Specification for Welded Brass Tube

ASTM B0588-88R01 : Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique

ASTM B0589-94R99E01 : Specification for Refined Palladium

ASTM B0591-04 : Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

ASTM B0592-01 : Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B0593-96R03E01 : Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials

ASTM B0594-02 : Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications

ASTM B0595-95R00 : Specification for Sintered Aluminum Structural Parts

ASTM B0596-89R99 : Specification for Gold-Copper Alloy Electrical Contact Material

ASTM B0597 : Practice for Heat Treatment of Aluminum Alloys

ASTM B0598-98R04 : Practice for Determining Offset Yield Strength in Tension for Copper Alloys

ASTM B0599-92R03E01 : Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

ASTM B0600-91R02 : Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

ASTM B0601-02 : Classification for Temper Designations for Copper and Copper Alloys\MWrought and Cast

ASTM B0602-88R99 : Test Method for Attribute Sampling of Metallic and Inorganic Coatings

ASTM B0603-90R01 : Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

ASTM B0604-91R03E01 : Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

ASTM B0605-95AR04 : Specification for Electrodeposited Coatings of Tin-Nickel Alloy

ASTM B0606-02 : Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

ASTM B0607-91R03 : Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

ASTM B0608-02 : Specification for Welded Copper-Alloy Pipe

ASTM B0609/B0609M-99R04 : Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

ASTM B0610-00E01 : Test Method for Measuring Dimensional Changes of Metal Powder Specimens

ASTM B0611-85R00E01 : Test Method for Abrasive Wear Resistance of Cemented Carbides

ASTM B0612-00 : Specification for Iron Bronze Sintered Bearings (Oil-Impregnated)

ASTM B0613-76R00 : Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts

ASTM B0614-95R00 : Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

ASTM B0615-79R00 : Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

ASTM B0616-96R00 : Specification for Refined Rhodium

ASTM B0617-98R04 : Specification for Coin Silver Electrical Contact Alloy

ASTM B0618-03 : Specification for Aluminum-Alloy Investment Castings

ASTM B0619-05 : Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

ASTM B0620-03 : Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

ASTM B0621-02 : Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

ASTM B0622-04A : Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASTM B0624-99 : Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

ASTM B0625-04A : Specification for UNS N08904, UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip

ASTM B0626-04 : Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

ASTM B0628-98R04 : Specification for Silver-Copper Eutectic Electrical Contact Alloy

ASTM B0629-77R03 : Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

ASTM B0630-88R01 : Practice for Preparation of Chromium for Electroplating with Chromium

ASTM B0631-93R04 : Specification for Silver-Tungsten Electrical Contact Materials

ASTM B0632/B0632M-02 : Specification for Aluminum-Alloy Rolled Tread Plate

ASTM B0633-98E01 : Specification for Electrodeposited Coatings of Zinc on Iron and Steel

ASTM B0634-88R04E01 : Specification for Electrodeposited Coatings of Rhodium for Engineering Use

ASTM B0635-00R04E01 : Specification for Coatings of Cadmium-Tin Mechanically Deposited

ASTM B0636-84R01 : Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

ASTM B0637-03 : Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service

ASTM B0639-02 : Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

ASTM B0640-00 : Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

ASTM B0643-00E01 : Specification for Copper-Beryllium Alloy Seamless Tube

ASTM B0644-95R03 : Specification for Copper Alloy Addition Agents

ASTM B0645-02 : Practice for Plane\NStrain Fracture Toughness Testing of Aluminum Alloys

ASTM B0646-04 : Practice for Fracture Toughness Testing of Aluminum Alloys

ASTM B0647-84R00 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

ASTM B0648-78R00 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

ASTM B0649-04 : Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904), Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033)

ASTM B0650-95R02 : Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

ASTM B0651-83R01 : Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

ASTM B0652/B0652M-04 : Specification for Niobium-Hafnium Alloy Ingots

ASTM B0653/B0653M-02 : Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

ASTM B0654/B0654M-04 : Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

ASTM B0655/B0655M-04 : Specification for Niobium-Hafnium Alloy Bar, Rod, and Wire

ASTM B0657-92R00 : Test Method for Metallographic Determination of Microstructure in Cemented Tungsten Carbides

ASTM B0658/B0658M-02 : Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

ASTM B0659-90R03 : Guide for Measuring Thickness of Metallic and Inorganic Coatings

ASTM B0660-02 : Practices for Packaging/Packing of Aluminum and Magnesium Products

ASTM B0661-03 : Practice for Heat Treatment of Magnesium Alloys

ASTM B0662-94R00 : Specification for Silver-Molybdenum Electrical Contact Material

ASTM B0663-94R00 : Specification for Silver-Tungsten Carbide Electrical Contact Material

ASTM B0664-90R00 : Specification for 80 \% Silver-20 \% Graphite Sliding Contact Material

ASTM B0665-03 : Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

ASTM B0666/B0666M-01 : Practice for Identification Marking of Aluminum and Magnesium Products

ASTM B0667-97R03E01 : Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance

ASTM B0668-00 : Specification for UNS N08028 Seamless Pipe and Tube

ASTM B0670-02 : Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

ASTM B0671-81R99E01 : Specification for Refined Iridium

ASTM B0672-02 : Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

ASTM B0673-04 : Specification for UNS N08904, UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

ASTM B0674-04 : Specification for UNS N08904, UNS N08925, UNS N08354, and UNS N08926 Welded Tube

ASTM B0675-02 : Specification for UNS N08367 Welded Pipe

ASTM B0676-03 : Specification for UNS N08367 Welded Tube

ASTM B0677-04A : Specification for UNS N08904, UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

ASTM B0678-86R01 : Test Method for Solderability of Metallic-Coated Products

ASTM B0679-98R04E01 : Specification for Electrodeposited Coatings of Palladium for Engineering Use

ASTM B0680-80R04 : Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

ASTM B0682-01 : Specification for Standard Metric Sizes of Electrical Conductors

ASTM B0683-01 : Specification for Pure Palladium Electrical Contact Material

ASTM B0684-97R02 : Specification for Platinum-Iridium Electrical Contact Materials

ASTM B0685-01 : Specification for Palladium-Copper Electrical Contact Material

ASTM B0686-03 : Specification for Aluminum Alloy Castings, High-Strength

ASTM B0687-99 : Specification for Brass, Copper, and Chromium-Plated Pipe Nipples 

ASTM B0688-96R04 : Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

ASTM B0689-97R03 : Specification for Electroplated Engineering Nickel Coatings

ASTM B0690-02 : Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

ASTM B0691-02 : Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

ASTM B0692-90R00 : Specification for 75 \% Silver-25 \% Graphite Sliding Contact Material

ASTM B0693-91R01 : Specification for Silver-Nickel Electrical Contact Materials

ASTM B0694-03 : Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

ASTM B0695-04 : Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

ASTM B0696-00R04E01 : Specification for Coatings of Cadmium Mechanically Deposited

ASTM B0697-88R99 : Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

ASTM B0698-02 : Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

ASTM B0699-86R03 : Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

ASTM B0700-97R02 : Specification for Electrodeposited Coatings of Silver for Engineering Use

ASTM B0701/B0701M-00 : Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

ASTM B0702-93R04 : Specification for Copper-Tungsten Electrical Contact Material

ASTM B0703-94R99E01 : Test Method for Apparent Density of Powders Using Arnold Meter

ASTM B0704-03 : Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

ASTM B0705-03 : Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

ASTM B0706-00 : Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

ASTM B0708-01 : Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

ASTM B0709-04 : Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip

ASTM B0710-04 : Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

ASTM B0711-99 : Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

ASTM B0712-93R99 : Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials

ASTM B0715-96R01 : Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications

ASTM B0717-96R00 : Specification for Refined Ruthenium

ASTM B0718-00 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

ASTM B0719-00 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

ASTM B0721 : Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts

ASTM B0722-02 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

ASTM B0723-00 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe

ASTM B0724-00 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument

ASTM B0725-93R03E01 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

ASTM B0726-02 : Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

ASTM B0727-04 : Practice for Preparation of Plastics Materials for Electroplating

ASTM B0729-00 : Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

ASTM B0730 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube

ASTM B0731-96R01 : Specification for 60 \% Palladium-40 \% Silver Electrical Contact Material

ASTM B0733-04 : Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

ASTM B0734-97R03E01 : Specification for Electrodeposited Copper for Engineering Uses

ASTM B0735-95R00 : Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

ASTM B0736-00 : Specification for Aluminum, Aluminum Alloy, and Aluminum-Clad Steel Cable Shielding Stock

ASTM B0737-01 : Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

ASTM B0738-03 : Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

ASTM B0739-03 : Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube

ASTM B0740-02 : Specification for Copper-Nickel-Tin Spinodal Alloy Strip

ASTM B0741-95R00 : Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography

ASTM B0742-90R00 : Specification for Fine Silver Electrical Contact Fabricated Material

ASTM B0743-00 : Specification for Seamless Copper Tube in Coils

ASTM B0744/B0744M-05 : Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe

ASTM B0745/B0745M-97 : Specification for Corrugated Aluminum Pipe for Sewers and Drains

ASTM B0746/B0746M-02 : Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

ASTM B0747-02 : Specification for Copper-Zirconium Alloy Sheet and Strip

ASTM B0748-90R01 : Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

ASTM B0749-03 : Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

ASTM B0750-03 : Specification for GALFAN (Zinc-5 \% Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

ASTM B0751-03 : Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

ASTM B0752-01 : Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

ASTM B0753-01 : Specification for Thermostat Component Alloys

ASTM B0754-89R99E01 : Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

ASTM B0755-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

ASTM B0756-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

ASTM B0757-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

ASTM B0758-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

ASTM B0759-00 : Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

ASTM B0760-86R99 : Specification for Tungsten Plate, Sheet, and Foil

ASTM B0761-02E01 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

ASTM B0762-90R99 : Test Method of Variables Sampling of Metallic and Inorganic Coatings

ASTM B0763-04 : Specification for Copper Alloy Sand Castings for Valve Applications

ASTM B0764-04 : Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

ASTM B0765-03 : Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

ASTM B0766-86R03 : Specification for Electrodeposited Coatings of Cadmium

ASTM B0767-88R01 : Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

ASTM B0768-99R04 : Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

ASTM B0769-94R00 : Test Method for Shear Testing of Aluminum Alloys

ASTM B0770-02 : Specification for Copper-Beryllium Alloy Sand Castings for General Applications

ASTM B0771-87R01 : Test Method for Short Rod Fracture Toughness of Cemented Carbides

ASTM B0772-97R03 : Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)

ASTM B0773-96R02E01 : Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies

ASTM B0774-00 : Specification for Low Melting Point Alloys

ASTM B0775-02 : Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

ASTM B0776-01A : Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

ASTM B0777-99 : Specification for Tungsten Base, High-Density Metal

ASTM B0778-02 : Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

ASTM B0779-03 : Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

ASTM B0780-98R04 : Specification for 75 \% Silver, 24.5 \% Copper, 0.5 \% Nickel Electrical Contact Alloy

ASTM B0781-93AR99 : Guide for Silver-Cadmium Oxide Contact Material

ASTM B0782-00 : Specification for Iron Graphite Sintered Bearings (Oil-Impregnated)

ASTM B0783-04 : Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts

ASTM B0784-01 : Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables

ASTM B0786-02A : Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

ASTM B0787/B0787M-04 : Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

ASTM B0788/B0788M-04 : Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

ASTM B0789/B0789M-99R05 : Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

ASTM B0790/B0790M-00 : Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits

ASTM B0792-01E01 : Specification for Zinc Alloys in Ingot Form for Slush Casting

ASTM B0793-03 : Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

ASTM B0794-97R03 : Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements

ASTM B0795-93R02E01 : Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (P/F) Steel Parts

ASTM B0796-02 : Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging (P/F) Applications

ASTM B0797-93R02E01 : Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts

ASTM B0798-95R00 : Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography

ASTM B0799-95R00 : Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor

ASTM B0800-00 : Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes\MAnnealed and Intermediate Tempers

ASTM B0801-99 : Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

ASTM B0802/B0802M-02 : Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

ASTM B0803-02 : Specification for High-Strength Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

ASTM B0804-02 : Specification for UNS N08367 and UNS N08926 Welded Pipe

ASTM B0805-02 : Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725, N07773, N07776, and N09777, Bar and Wire

ASTM B0806-04 : Specification for Copper Alloy Permanent Mold Castings for General Applications

ASTM B0807-02 : Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

ASTM B0808-97R03 : Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

ASTM B0809-95R03 : Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (|P`Flowers-of-Sulfur|P’)

ASTM B0810-01A : Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

ASTM B0811-02 : Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

ASTM B0812-96R02E01 : Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

ASTM B0813-00E01 : Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

ASTM B0814-02 : Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

ASTM B0815-02 : Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

ASTM B0816-00R04E01 : Specification for Coatings of Cadmium-Zinc Mechanically Deposited

ASTM B0817-03 : Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components

ASTM B0818-03 : Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

ASTM B0819-00 : Specification for Seamless Copper Tube for Medical Gas Systems

ASTM B0820-04E01 : Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

ASTM B0821-02 : Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

ASTM B0822-02 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

ASTM B0823-01 : Specification for Materials for Nonferrous Powder Metallurgy (P/M) Structural Parts

ASTM B0824-04 : Specification for General Requirements for Copper Alloy Castings

ASTM B0825-02 : Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

ASTM B0826-03 : Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

ASTM B0827-97R03 : Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

ASTM B0828-02 : Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

ASTM B0829-04A : Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

ASTM B0830-97R03 : Specification for Uniform Test Methods and Frequency

ASTM B0831-05 : Test Method for Shear Testing of Thin Aluminum Alloy Products

ASTM B0832-93R03 : Guide for Electroforming with Nickel and Copper

ASTM B0833-01A : Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing)

ASTM B0834-95R03 : Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves,

ASTM B0835-04 : Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

ASTM B0836-00 : Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

ASTM B0837-01 : Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems

ASTM B0839-04 : Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod\MInclined Wedge Method

ASTM B0840-99R04 : Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits

ASTM B0841-99R04 : Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

ASTM B0842-99 : Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits

ASTM B0843-93R03 : Specification for Magnesium Alloy Anodes for Cathodic Protection

ASTM B0844-98R04 : Guide for Silver-Tin Oxide Contact Material

ASTM B0845-97R03 : Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

ASTM B0846-01E01 : Terminology for Copper and Copper Alloys

ASTM B0848-01 : Specification for Powder Forged (P/F) Ferrous Structural Parts

ASTM B0849-02 : Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

ASTM B0850-98R04 : Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

ASTM B0851-04 : Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish

ASTM B0852-01 : Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

ASTM B0853-02 : Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components

ASTM B0854-98R04 : Guide for Measuring Electrical Contact Intermittences

ASTM B0855-94R99E01 : Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel

ASTM B0856-03 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

ASTM B0857-02 : Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

ASTM B0858-01 : Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

ASTM B0859-03 : Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

ASTM B0860-02 : Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

ASTM B0861-05 : Specification for Titanium and Titanium Alloy Seamless Pipe

ASTM B0862-05 : Specification for Titanium and Titanium Alloy Welded Pipe

ASTM B0863-05 : Specification for Titanium and Titanium Alloy Wire

ASTM B0864/B0864M-00 : Specification for Corrugated Aluminum Box Culverts

ASTM B0865-04 : Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

ASTM B0866-95R03 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

ASTM B0867-95R03 : Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use

ASTM B0868-96R02E02 : Practice for Contact Performance Classification of Electrical Connection Systems

ASTM B0869-04 : Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

ASTM B0870-02 : Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

ASTM B0871-01 : Test Method for Tear Testing of Aluminum Alloy Products

ASTM B0872-96R03 : Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip

ASTM B0873-01 : Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B 212, B 329, and B 417

ASTM B0874-96R03 : Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

ASTM B0875-96R03 : Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

ASTM B0876 : Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application

ASTM B0877-96R03 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

ASTM B0878-97R03 : Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors

ASTM B0879-97R03E01 : Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

ASTM B0880-03 : Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

ASTM B0881-98AR04 : Terminology Relating to Aluminum- and Magnesium-Alloy Products

ASTM B0882-00 : Specification for Pre-Patinated Copper for Architectural Applications

ASTM B0883-97 : Specification for Metal Injection Molding (MIM), Ferrous Structural Parts

ASTM B0884-01 : Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

ASTM B0885-97R03 : Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts

ASTM B0886-03 : Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

ASTM B0887-03 : Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

ASTM B0888-04 : Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

ASTM B0889 : Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes

ASTM B0890-02 : Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

ASTM B0891-98R04 : Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes With Integral Fins

ASTM B0892-03 : Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings

ASTM B0893-98R03 : Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

ASTM B0894-03 : Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings

ASTM B0895-99 : Test Methods for Evaluating the Corrosion Resistance of Powder Metallurgy (P/M) Stainless Steel Parts/Specimens by Immersion in a Sodium Chloride Solution

ASTM B0896-99 : Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

ASTM B0897-03 : Specification for the Configuration of Zinc and Zinc Alloy Jumbo and Block Ingot

ASTM B0898-99 : Specification for Reactive and Refractory Metal Clad Plate

ASTM B0899-04 : Terminology Relating to Non-ferrous Metals and Alloys

ASTM B0900-04 : Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies

ASTM B0901-04 : Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

ASTM B0902-04A : Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

ASTM B0903-00 : Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

ASTM B0904-00R04 : Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding

ASTM B0905-00 : Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test

ASTM B0906-02 : Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

ASTM B0907-04 : Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders and for Thermal Spraying

ASTM B0908-03 : Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

ASTM B0909-00 : Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products

ASTM B0910/B0910M-04 : Specification for Annealed Copper-Clad Steel Wire

ASTM B0911/B0911M-00 : Specification for ACSR Twisted Pair Conductor (ACSR/TP)

ASTM B0912-02 : Specification for Passivation of Stainless Steels Using Electropolishing

ASTM B0913-00E01 : Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors

ASTM B0914-03E01 : Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

ASTM B0915-01 : Test Method for Measuring the Static Heat Resistance of a Self-Cleaning Oven Coating

ASTM B0916-01 : Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

ASTM B0917/B0917M-01 : Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes

ASTM B0918-01 : Practice for Heat Treatment of Wrought Aluminum Alloys

ASTM B0919-01 : Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

ASTM B0920-01 : Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution

ASTM B0921-02 : Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

ASTM B0922-02 : Test Method for Metal Powder Specific Surface Area by Physical Adsorption

ASTM B0923-02 : Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

ASTM B0924-02 : Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

ASTM B0925-03 : Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens

ASTM B0926-03 : Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table

ASTM B0927-03 : Specification for Brass Rod, Bar, and Shapes

ASTM B0928/B0928M-04A : Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

ASTM B0930-03 : Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)

ASTM B0931-03 : Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (P/M) Parts

ASTM B0932-04 : Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip

ASTM B0933-04 : Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials

ASTM B0934-04A : Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

ASTM B0936-04 : Specification for Copper-Chrome-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

ASTM B0937-04 : Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

ASTM B0938-04 : Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)

ASTM B100 : Specification for Wrought Copper Alloy Bearing and Expansion Plates and Sheets for Bridgeand Other Structural Use

ASTM B101 : Specification for Lead Coated Copper Sheet and Strip for Building Construction

ASTM B10-18 : Specification for Tin-Bronze and Leaded Tin-Bronze Sand Casting (Withdrawn 1933)

ASTM B102 : Specification for Lead and Tin Alloy Die Castings

ASTM B103/B103M : Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

ASTM B104-36 : Specification for Seamless Copper-Nickel Alloy Condenser Tubes and Ferrule Stock (Withdrawn 1936)

ASTM B105 : Specification for Hard Drawn Copper Alloy Wires for Electric Conductors

ASTM B106 : Test Methods for Flexivity of Thermostat Metals

ASTM B107/B107M : Specification for Magnesium Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

ASTM B107M-90 : Specification for Magnesium-Alloy Extruded Bars, Rods, Shapes, Tubes, and Wire (Metric) (Withdrawn 1992)

ASTM B108 : Specification for Aluminum Alloy Permanent Mold Castings

ASTM B109-44 : Specification for Aluminum and Aluminum Alloy Sheet and Plate (Withdrawn 1945)

ASTM B110-80 : Method of Dielectric Strength of Anodically Coated Aluminum (Withdrawn 1981)

ASTM B111/B111M : Specification for Copper and Copper Alloy Seamless Condenser Tubes and Ferrule Stock

ASTM B111M : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock[Metric] (Withdrawn 2004) Replaced by B111/B111M

ASTM B111M-98e2 : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock [Metric] (Withdrawn 2004)

ASTM B112-44 : Specification for Aluminum-Base Alloys in Ingot Form for Sand Die Castings (Withdrawn 1945)

ASTM B114 : Test Method for Temperature Resistance Constants of Sheet Materials for Shunts andPrecision Resistors

ASTM B115 : Specification for Electrolytic Copper Cathode

ASTM B116 : Specification for Figure 9 Deep Grooved and Figure 8 Copper Trolly Wire for IndustrialHaulage

ASTM B11-78 : Specification for Copper Plates for Locomotive Fireboxes (Withdrawn 1980)

ASTM B119-64 : Method of Nickel and Nickel-Alloy Wire and Ribbon for Electronic Tube Filaments (Withdrawn 1975)

ASTM B120-41 : Specification for Copper Beryllium Alloy Plate, Sheet, Strip, And Rolled Bar (Withdrawn 1944)

ASTM B121/B121M : Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

ASTM B122/B122M : Specification for Copper Nickel Tin Alloy, Copper Nickel Zinc Alloy (Nickel Silver), and CopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B123-39 : Specification for Copper-Base Alloys in Ingot Form for Sand Casting (Withdrawn 1939)

ASTM B124/B124M : Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

ASTM B124M-96 : Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes [Metric] (Withdrawn 2000)

ASTM B125-44 : Specification for Aluminum-Base Alloys in Ingot Form for Sand Castings, Die Castings, and Permanent Mold Castings (Withdrawn 1945)

ASTM B126-46 : Specification for Aluminum-Manganese Alloy Sheet and Plate for Use in Welded Pressure Vessels (Withdrawn 1946)

ASTM B127 : Specification for Nickel Copper Alloy (UNS N04400) Plate, Sheet, and Strip

ASTM B12-76A : Specification for Copper Rods for Locomotive Staybolts (Withdrawn 1981)

ASTM B128-55 : Methods of Sleeves and Tubing for Radio Tube Cathodes (Withdrawn 1954)

ASTM B129 : Specification for Cartridge Brass Cartridge Case Cups

ASTM B130 : Specification for Commercial Bronze Strip for Bullet Jackets

ASTM B131 : Specification for Copper Alloy Bullet Jacket Cups

ASTM B132-70 : Specification for Leaded High-Strength Yellow Brass (Manganese Bronze) Sand Castings (Withdrawn 1972)

ASTM B133-93A : Specification for Copper Rod, Bar, and Shapes (Withdrawn 1994)

ASTM B133M-93A : Specification for Copper Rod, Bar, And Shapes Metric (Withdrawn 1994)

ASTM B134/B134M : Specification for Brass Wire

ASTM B135 : Specification for Seamless Brass Tube

ASTM B13-58 : Specification for Seamless Copper Boiler Tubes (Withdrawn 1960)

ASTM B135M : Specification for Seamless Brass Tube [Metric]

ASTM B137 : Test Method for Measurement of Coating Mass Per Unit Area on Anodically CoatedAluminum

ASTM B138/B138M : Specification for Manganese Bronze Rod, Bar, and Shapes

ASTM B138-96 : Specification for Manganese Bronze Rod, Bar and Shapes (Withdrawn 2001)

ASTM B138M-96 : Specification for Manganese Bronze Rod, Bar and Shapes [Metric] (Withdrawn 2001)

ASTM B139/B139M : Specification for Phosphor Bronze Rod, Bar, and Shapes

ASTM B139-95 : Specification for Phosphor Bronze Rod, Bar, and Shapes (Withdrawn 2001)

ASTM B139M-95 : Specification for Phosphor Bronze Rod, Bar, and Shapes [Metric] (Withdrawn 2001)

ASTM B140/B140M : Specification for Copper Zinc Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

ASTM B140M-92 : Specification for Copper-Zinc-Lead (Leaded Red Brass or Hardware Bronze) Rod, Bar, and Shapes [Metric] (Withdrawn 1997)

ASTM B141-58 : Specification for Electrodeposited Coatings of Nickel and Chromium on Copper and Copper-Base Alloys (Withdrawn 1966)

ASTM B142-61 : Specification for Electrodeposited Coatings of Nickel and Chromium on Zinc and Zinc-Base Alloys (Withdrawn 1966)

ASTM B143-70 : Specification for Tin-Bronze and Leaded Tin-Bronze Sand Castings (Withdrawn 1972)

ASTM B144-70 : Specification for High-Leaded Tin-Bronze Sand Castings (Withdrawn 1972)

ASTM B145-70 : Specification for Leaded Red Brass and Leaded Semi-Red Brass Sand Castings (Withdrawn 1972)

ASTM B146-70 : Specification for Leaded Yellow Brass Sand Castings for General Purposes (Withdrawn 1972)

ASTM B147-72 : Specification for High-Strength Yellow Brass (Manganese Bronze) and Leaded High-Strength Yellow Brass (Leaded Manganese Bronze) Sand Castings (Withdrawn 1972)

ASTM B148 : Specification for Aluminum Bronze Sand Castings

ASTM B149-70 : Specification for Leaded Nickel-Brass (Leaded Nickel-Silver) and Leaded Nickel-Bronze (Leaded Nickel-Silver) (Withdrawn 1972)

ASTM B150/B150M : Specification for Aluminum Bronze Rod, Bar, and Shapes

ASTM B150-98e2 : Specification for Aluminum Bronze Rod, Bar, and Shapes (Withdrawn 2002)

ASTM B150M-95a : Specification for Aluminum Bronze, Rod, Bar, and Shapes [Metric] (Withdrawn 2002) 

ASTM B151/B151M : Specification for Copper Nickel Zinc Alloy (Nickel Silver) and Copper Nickel Rod and Bar

ASTM B15-18 : Specification for Copper and Copper-Based Alloy Forging Rod, Bar, and Shapes (Withdrawn 1939)

ASTM B151M-94 : Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar [Metric] (Withdrawn 2001)

ASTM B152/B152M : Specification for Copper Sheet, Strip, Plate, and Rolled Bar

ASTM B152M-97a : Specification for Copper Sheet, Strip, Plate, and Rolled Bar [Metric] (Withdrawn 2000)

ASTM B153 : Test Method for Expansion (Pin Test) of Copper and Copper Alloy Pipe and Tubing

ASTM B157-45 : Methods of Wiere for Supports Used in Electronic Devices and Lamps (Withdrawn 1954)

ASTM B158-41 : Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members for Electrical Conductors (Withdrawn 1941)

ASTM B159/B159M : Specification for Phosphor Bronze Wire

ASTM B159-96ae1 : Specification for Phosphor Bronze Wire (Withdrawn 2001)

ASTM B159M-96ae1 : Specification for Phosphor Bronze Wire [Metric] (Withdrawn 2001)

ASTM B16/B16M : Specification for Free Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

ASTM B160 : Specification for Nickel Rod and Bar

ASTM B161 : Specification for Nickel Seamless Pipe and Tube

ASTM B162 : Specification for Nickel Plate, Sheet, and Strip

ASTM B163 : Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes

ASTM B164 : Specification for Nickel Copper Alloy Rod, Bar, and Wire

ASTM B165 : Specification for Nickel Copper Alloy (UNS N04400)* Seamless Pipe and Tube

ASTM B166 : Specification for Nickel Chromium Iron Alloys (UNS N06600, N06601, N06603, N06690,

ASTM B167 : Specification for Nickel Chromium Iron Alloys (UNS N06600, N06601, N06603, N06690,

ASTM B168 : Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603,N06690,

ASTM B169/B169M : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

ASTM B169-95 : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar (Withdrawn 2001)

ASTM B169M-96 : Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar [Metric] (Withdrawn 2001)

ASTM B16M-92 : Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric] (Withdrawn 2000)

ASTM B170 : Specification for Oxygen Free Electrolytic Copper/Refinery Shapes

ASTM B171/B171M : Specification for Copper Alloy Plate and Sheet for Pressure Vessels, Condensers, and HeatExchangers

ASTM B171M-96 : Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers and Heat Exchangers [Metric] (Withdrawn 1999)

ASTM B172 : Specification for Rope Lay Stranded Copper Conductors Having Bunch Stranded Members, for Electrical Conductors

ASTM B17-21 : Specification for Bronze Castings in the Rough for Locomotive Wearing Parts (Withdrawn 1925)

ASTM B173 : Specification for Rope Lay Stranded Copper Conductors Having Concentric StrandedMembers, for Electrical Conductors

ASTM B174 : Specification for Bunch Stranded Copper Conductors for Electrical Conductors

ASTM B175-45 : Specification for Round Nickel Wire for Lamps and Electric Devices (Withdrawn 1954)

ASTM B176 : Specification for Copper Alloy Die Castings

ASTM B176-95 : Specification for Copper-Alloy Die Castings (Withdrawn 2004)

ASTM B177 : Guide for Engineering Chromium Electroplating

ASTM B178-54 : Specification for Aluminum-Alloy Sheet and Plate for Pressure Vessel Application (Withdrawn 1956)

ASTM B179 : Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All CastingProcesses

ASTM B181-50 : Method of Effect of Controlled Atmospheres Upon Alloys in Electric Furnaces (Withdrawn 1969)

ASTM B182-49 : Method for Life Test of Electrical Contact Materials (Withdrawn 1981)

ASTM B183 : Practice for Preparation of Low Carbon Steel for Electroplating

ASTM B18-36 : Methods of Chemical Analysis of Lead, Tin, and Base Solder Metal (Withdrawn 1941)

ASTM B184-62 : Specification for Aluminum and Aluminum-Alloy Metal Arc-Welding Electrodes (Withdrawn 1968)

ASTM B185-43 : Method of Total Immersion Corrosion Test of Non-Ferrous Metals (Withdrawn 1963)

ASTM B186-42 : Specification for Special Quality Zinc-Base Alloy Die Castings (Withdrawn 1945)

ASTM B187/B187M : Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, andShapes

ASTM B187M-97 : Specification for Copper Bar, Bus Bar, Rod and Shapes [Metric] (Withdrawn 2002)

ASTM B188 : Specification for Seamless Copper Bus Pipe and Tube

ASTM B189 : Specification for Lead Coated and Lead Alloy Coated Soft Copper Wire for Electrical Purposes

ASTM B189-95 : Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes (Withdrawn 2004)

ASTM B19 : Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

ASTM B190-58 : Specification for Chromium-Nickel-Iron Alloy Castings (25-12 Class) for High-Temperature Service (Withdrawn 1960)

ASTM B191-44 : Method of Equivalent Yield Stress of Thermostat Metals (Withdrawn 1955)

ASTM B192-44 : Method of Alternate Immersion Corrosion Testing of Non-Ferrous Metals (Withdrawn 1963)

ASTM B193 : Test Method for Resistivity of Electrical Conductor Materials

ASTM B194 : Specification for Copper Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B195-49 : Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar (Withdrawn 1951)

ASTM B196/B196M : Specification for Copper Beryllium Alloy Rod and Bar

ASTM B196-95a : Specification for Copper-Beryllium Alloy Rod and Bar

ASTM B196M-97 : Specification for Copper-Beryllium Alloy Rod and Bar [Metric] (Withdrawn 2001)

ASTM B197/B197M : Specification for Copper Beryllium Alloy Wire

ASTM B197M-93 : Specification for Copper-Beryllium Alloy Wire [Metric] (Withdrawn 1998)

ASTM B198-70 : Specification for Silicon Bronze and Silicon Brass Sand Castings (Withdrawn 1972)

ASTM B199 : Specification for Magnesium Alloy Permanent Mold Castings

ASTM B2 : Specification for Medium Hard Drawn Copper Wire

ASTM B200 : Specification for Electrodeposited Coatings of Lead and Lead Tin Alloys on Steel and FerrousAlloys

ASTM B201 : Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

ASTM B202-64 : Specification for Metal Powder Sintered Bearings (Oil Impregnated) (Withdrawn 1965)

ASTM B20-29 : Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks (Withdrawn 1939)

ASTM B203-46 : Method of Strength of Welded Joints of Lead Wires for Electronic Devices and Lamps (Withdrawn 1954)

ASTM B206/B206M : Specification for Copper Nickel Zinc Alloy (Nickel Silver) Wire and Copper Nickel Alloy Wire

ASTM B206M-94 : Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) Wire and Copper-Nickel Alloy Wire [Metric] (Withdrawn 1997)

ASTM B208 : Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold,

ASTM B209 : Specification for Aluminum and Aluminum Alloy Sheet and Plate

ASTM B209M : Specification for Aluminum and Aluminum Alloy Sheet and Plate [Metric]

ASTM B21/B21M : Specification for Naval Brass Rod, Bar, and Shapes

ASTM B210 : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes

ASTM B210M : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes [Metric]

ASTM B211 : Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire

ASTM B211M : Specification for Aluminum and Aluminum Alloy Bar, Rod, and Wire [Metric]

ASTM B212 : Test Method for Apparent Density of Free Flowing Metal Powders Using the Hall FlowmeterFunnel

ASTM B213 : Test Method for Flow Rate of Metal Powders

ASTM B214 : Test Method for Sieve Analysis of Metal Powders

ASTM B215 : Practices for Sampling Metal Powders

ASTM B216 : Specification for Tough Pitch Fire Refined Copper/Refinery Shapes

ASTM B217-63 : Specification for Magnesium-Base Alloy Extruded Tubes (Withdrawn 1964)

ASTM B21-96 : Specification for Naval Brass Rod, Bar, and Shapes

ASTM B21M-96 : Specification for Naval Brass Rod, Bar, and Shapes [Metric] (Withdrawn 2001)

ASTM B22 : Specification for Bronze Castings for Bridges and Turntables

ASTM B220-48 : Methods of Tension Testing Metallic Materials (Withdrawn 1954)

ASTM B221 : Specification for Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Profiles, andTubes

ASTM B221M : Specification for Aluminum and Aluminum Alloy Extruded Bars, Rods, Wire, Profiles, andTubes [Metric]

ASTM B222-83A : Specification for Sintered Iron-Copper Structural Parts (Withdrawn 1988)

ASTM B223 : Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

ASTM B224 : Classification of Coppers

ASTM B225-69 : Specification for Copper and Copper-Alloy Arc-Welding Electrodes (Withdrawn 1968)

ASTM B226 : Specification for Cored, Annular, Concentric Lay Stranded Copper Conductors

ASTM B227 : Specification for Hard Drawn Copper Clad Steel Wire

ASTM B228 : Specification for Concentric Lay Stranded Copper Clad Steel Conductors

ASTM B229 : Specification for Concentric Lay Stranded Copper and Copper Clad Steel CompositeConductors

ASTM B23 : Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)

ASTM B230/B230M : Specification for Aluminum 1350 H19 Wire for Electrical Purposes

ASTM B230M-98 : Specification for Aluminum 1350-H19 Wire for Electrical Purposes [Metric] (Withdrawn 1999)

ASTM B231/B231M : Specification for Concentric Lay Stranded Aluminum 1350 Conductors

ASTM B231M-95 : Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors [Metric] (Withdrawn 1999)

ASTM B232/B232M : Specification for Concentric Lay Stranded Aluminum Conductors, Coated Steel Reinforced(ACSR)

ASTM B232M-97 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel-Reinforced (ACSR) [Metric] (Withdrawn 1999)

ASTM B233 : Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

ASTM B234 : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes for Condensers andHeat Exchangers

ASTM B234M : Specification for Aluminum and Aluminum Alloy Drawn Seamless Tubes for Condensers andHeat Exchangers [Metric]

ASTM B235-62 : Specification for Aluminum Alloy Extruded Tubes (Withdrawn 1962)

ASTM B236 : Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

ASTM B237 : Specification for Refined Antimony

ASTM B240 : Specification for Zinc and Zinc Aluminum (ZA) Alloys in Ingot Form for Foundry and DieCastings

ASTM B241/B241M : Specification for Aluminum and Aluminum Alloy Seamless Pipe and Seamless Extruded Tube

ASTM B241M-83A : Specification for Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube (Metric) (Withdrawn 1986)

ASTM B242 : Guide for Preparation of High Carbon Steel for Electroplating

ASTM B243 : Terminology of Powder Metallurgy

ASTM B244 : Endorsed by AmericanElectroplaters/ SocietyEndorsed by NationalAssociation of MetalFinishersTest Method for Measurement of Thickness of Anodic Coatings onAluminum and ofOther Nonconductive Coatings onNonmagnetic Basis Metals with Eddy-Current

ASTM B24-46 : Specification for Aluminum Ingots for Remelting (Withdrawn 1955)

ASTM B245-63 : Specification for Standard Weight Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) (Withdrawn 1968)

ASTM B246 : Specification for Tinned Hard Drawn and Medium Hard Drawn Copper Wire for ElectricalPurposes

ASTM B247 : Specification for Aluminum and Aluminum Alloy Die Forgings, Hand Forgings, and RolledRing Forgings

ASTM B247M : Specification for Aluminum and Aluminum Alloy Die Forgings, Hand Forgings, and RolledRing Forgings [Metric]

ASTM B248 : Specification for General Requirements for Wrought Copper and Copper Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B248M : Specification for General Requirements for Wrought Copper and Copper Alloy Plate, Sheet, Strip and Rolled Bar [Metric]

ASTM B249/B249M : Specification for General Requirements for Wrought Copper and Copper Alloy Rod, Bar, Shapes and Forgings

ASTM B249M-94a : Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings [Metric] (Withdrawn 2000)

ASTM B250/B250M : Specification for General Requirements for Wrought Copper Alloy Wire

ASTM B250M-95 : Specification for General Requirements for Wrought Copper Alloy Wire [Metric] (Withdrawn 2001)

ASTM B251 : Specification for General Requirements for Wrought Seamless Copper and Copper AlloyTube

ASTM B251M : Specification for General Requirements for Wrought Seamless Copper and Copper AlloyTube [Metric]

ASTM B252 : Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

ASTM B253 : Guide for Preparation of Aluminum Alloys for Electroplating

ASTM B254 : Practice for Preparation of and Electroplating on Stainless Steel

ASTM B25-44 : Specification for Aluminum Alloy Sheet and Plate (Withdrawn 1945)

ASTM B255-83a(1995)e1 : Specification for Sintered Bronze Structural Parts (Withdrawn 2000)

ASTM B258 : Specification for Standard Nominal Diameters and Cross Sectional Areas of AWG Sizes ofSolid Round Wires Used as Electrical Conductors

ASTM B259-69 : Specification for Copper and Copper-Alloy Welding Rods (Withdrawn 1968)

ASTM B260-62 : Specification for Brazing Filler Metal (Withdrawn 1968)

ASTM B261-63 : Specification for Zinc-Coated (Galvanized) Steel Core Wire (With Coatings Heavier than Standard Weight) for Aluminum Conductors, Steel Reinforced (ACSR) (Withdrawn 1968)

ASTM B262-61 : Specification for Aluminum Wire, EC-H16 or -H26, for Electrical Purposes (Withdrawn 1977)

ASTM B263 : Test Method for Determination of Cross Sectional Area of Stranded Conductors

ASTM B264- : Specification for Titanium Ingot (Withdrawn 1954)

ASTM B265 : Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ASTM B266- : Specification for Iodide Titanium (Withdrawn 1954)

ASTM B267 : Specification for Wire for Use In Wire Wound Resistors

ASTM B271 : Specification for Copper Base Alloy Centrifugal Castings

ASTM B272 : Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire andStrip)

ASTM B273- : Specification for Aluminum and Aluminum-Alloy Bars, Rods, and Shapes for Pressure Vessel Applications (Withdrawn 1956)

ASTM B27-36 : Methods of Chemical Analysis for Sulfur in Special Brasses and Bronzes (Withdrawn 1942)

ASTM B274-56 : Specification for Aluminum and Aluminum-Alloy Pipe and Tube for Pressure Vessel Applications (Withdrawn 1956)

ASTM B275 : Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought

ASTM B276 : Test Method for Apparent Porosity in Cemented Carbides

ASTM B277 : Test Method for Hardness of Electrical Contact Materials

ASTM B279 : Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wirefor Magnet Wire Fabrication

ASTM B280 : Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

ASTM B281 : Practice for Preparation of Copper and Copper Base Alloys for Electroplating and ConversionCoatings

ASTM B282-83a(1995)e1 : Specification for Sintered Brass Structural Parts (Withdrawn 2000)

ASTM B283 : Specification for Copper and Copper Alloy Die Forgings (Hot Pressed)

ASTM B28-36 : Methods of Chemical Analysis of Special Brasses and Bronzes (Withdrawn 1942)

ASTM B284-79 : Specification for Rosin Flux-Core Solder (Withdrawn 1990)

ASTM B285-61 : Specification for Aluminum and Aluminum-Alloy Welding Rods and Bare Electrodes (Withdrawn 1968)

ASTM B286 : Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

ASTM B287-74 : Method of Acetic Acid-Salt Spray (Fog) Testing (Withdrawn 1987)

ASTM B29 : Specification for Refined Lead

ASTM B291-86 : Specification for Copper-Zinc-Manganese Alloy (Manganese Brass) Sheet and Strip (Withdrawn 1992)

ASTM B292-72 : Specification for Nickel-Tin Bronze Castings (Withdrawn 1972)

ASTM B293-76 : Method of Subsieve Analysis of Granular Metal Powders by Air Classification (Withdrawn 1984)

ASTM B294 : Test Method for Hardness Testing of Cemented Carbides

ASTM B295-69 : Specification for Nickel and Nickel-Alloy Covered Welding Electrodes (Withdrawn 1968)

ASTM B296 : Practice for Temper Designations of Magnesium Alloys, Cast and Wrought

ASTM B297-69 : Specification for Tungsten Arc-Welding Electrodes (Withdrawn 1969)

ASTM B298 : Specification for Silver Coated Soft or Annealed Copper Wire

ASTM B299 : Specification for Titanium Sponge

ASTM B3 : Specification for Soft or Annealed Copper Wire

ASTM B30 : Specification for Copper Alloys in Ingot Form

ASTM B301/B301M : Specification for Free Cutting Copper Rod, Bar, Wire and Shapes

ASTM B301M-96 : Specification for Free-Cutting Copper Rod and Bar [Metric] (Withdrawn 1999)

ASTM B302 : Specification for Threadless Copper Pipe, Standard Sizes

ASTM B303-83A : Specification for Copper-Infiltrated Sintered Carbon Steel Structural Parts (Withdrawn 1989)

ASTM B304-69 : Specification for Nickel and Nickel-Alloy Bare Welding Rods and Electrodes (Withdrawn 1968)

ASTM B305-56 : Test Method for Maximum Loading Stress at Temperature of Thermostat Metals ( Cantilever Beam Method) (Withdrawn 1985)

ASTM B306 : Specification for Copper Drainage Tube (DWV)

ASTM B307-67 : Specification for Aluminum-Alloy Drawn Seamless Coiled Tubes for Special Purpose Applications (Withdrawn 1967)

ASTM B308/B308M : Specification for Aluminum Alloy 6061 T6 Standard Structural Profiles

ASTM B308M-88 : Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990)

ASTM B309-58 : Specification for High Density Iron, Sintered Metal Powder Structural Parts (Withdrawn 1963)

ASTM B310-83A : Specification for Sintered Carbon Steel Structural Parts (Withdrawn 1989)

ASTM B312 : Test Method for Green Strength for Compacted Metal Powder Specimens

ASTM B31-28 : Specification for Copper-Base Alloys in Ingot Form for Sand Casting (Withdrawn 1932)

ASTM B313/B313M : Specification for Aluminum and Aluminum Alloy Round Welded Tubes

ASTM B313M-88 : Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990)

ASTM B314-90 : Specification for Aluminum 1350 Wire for Communication Cable (Withdrawn 1994)

ASTM B315 : Specification for Seamless Copper Alloy Pipe and Tube

ASTM B316/B316M : Specification for Aluminum and Aluminum Alloy Rivet and Cold Heading Wire and Rods

ASTM B316M-92A : Specification for Aluminum and Aluminum-Alloy Rivet and Cold Heading Wire and Rods (Metric) (Withdrawn 1993)

ASTM B317/B317M : Specification for Aluminum Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles forElectrical Purposes (Bus Conductor)

ASTM B318-62 : Specification for Type A and Type B Aluminum-Alloy Drawn Annealed Seamless Coiled Tubes (Withdrawn 1962)

ASTM B319 : Guide for Preparation of Lead and Lead Alloys for Electroplating

ASTM B32 : Specification for Solder Metal

ASTM B320 : Practice for Preparation of Iron Castings for Electroplating

ASTM B321-60 : Recommended Practice for Dimension Standards for Projection Welding Contacts (Withdrawn 1979)

ASTM B322 : Guide for Cleaning Metals Prior to Electroplating

ASTM B323-61 : Specification for Specification for Aluminum Wire, EC-H14 or -H24, for Electrical Purposes (Withdrawn 1977)

ASTM B324 : Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

ASTM B325-58 : Specification for Refined Secondary Lead (Withdrawn 1964)

ASTM B326-76 : Test Method for Resistance Characteristics of Microcontacts (Withdrawn 1991)

ASTM B327 : Specification for Master Alloys Used in Making Zinc Die Casting Alloys

ASTM B328 : Test Method for Density, Oil Content, and Interconnected Porosity of Sintered MetalStructural Parts and Oil Impregnated Bearings

ASTM B329 : Test Method for Apparent Density of Metal Powders and Compounds Using the ScottVolumeter

ASTM B330 : Test Method for Fisher Number of Metal Powders and Related Compounds

ASTM B331 : Test Method for Compressibility of Metal Powders in Uniaxial Compaction

ASTM B333 : Specification for Nickel Molybdenum Alloy Plate, Sheet, and Strip

ASTM B334-71 : Specification for Nickel-Molybdenum-Chromium Alloy (UNS N10002) Plate and Sheet (Withdrawn 1979)

ASTM B335 : Specification for Nickel Molybdenum Alloy Rod

ASTM B336-71 : Specification for Nickel-Molybdenum-Chromium Alloy (UNS N10002) Rod (Withdrawn 1979)

ASTM B337-95 : Specification for Seamless and Welded Titanium and Titanium Alloy Pipe (Withdrawn 1997)

ASTM B338 : Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensersand Heat Exchangers

ASTM B339 : Specification for Pig Tin

ASTM B340-61 : Test Method for Surety of Make of Electrical Contact Materials (Withdrawn 1990)

ASTM B341/B341M : Specification for Aluminum Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)

ASTM B341M-93 : Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) [Metric] (Withdrawn 1998)

ASTM B342-63 : Test Method for Electrical Conductivity by Use of Eddy Currents (Withdrawn 1984)

ASTM B343 : Practice for Preparation of Nickel for Electroplating with Nickel

ASTM B344 : Specification for Drawn or Rolled Nickel Chromium and Nickel Chromium Iron Alloys forElectrical Heating Elements

ASTM B345/B345M : Specification for Aluminum and Aluminum Alloy Seamless Pipe and Seamless Extruded Tubefor Gas and Oil Transmission and Distribution Piping Systems

ASTM B345M-96 : Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems (Metric) (Withdrawn 1998)

ASTM B346-59 : Specification for Machinable High-Density Tungsten-Nickel-Copper Alloys (Withdrawn 1965)

ASTM B347-85 : Test Method for Hardness of Sintered Metal Friction Materials (Withdrawn 1991)

ASTM B348 : Specification for Titanium and Titanium Alloy Bars and Billets

ASTM B349/B349M : Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

ASTM B350/B350M : Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

ASTM B351/B351M : Specification for Hot Rolled and Cold Finished Zirconium and Zirconium Alloy Bars, Rod, andWire for Nuclear Application

ASTM B352/B352M : Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for NuclearApplication

ASTM B353 : Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes forNuclear Service (Except Nuclear Fuel Cladding)

ASTM B35-36 : Methods of Chemical Analysis of Pig Lead (Withdrawn 1941)

ASTM B354 : Terminology Relating to Uninsulated Metallic Electrical Conductors

ASTM B355 : Specification for Nickel Coated Soft or Annealed Copper Wire

ASTM B356-67 : Specification for Zirconium and Zirconium Alloy Forgings and Extrusions for Nuclear Application (Withdrawn 1975)

ASTM B357-79 : Specification for Remelted Lithium Metal in Ingot Form (Withdrawn 1986)

ASTM B358-78 : Specification for Copper-Nickel Addition Alloy (Withdrawn 1979)

ASTM B359/B359M : Specification for Copper and Copper Alloy Seamless Condenser and Heat Exchanger TubesWith Integral Fins

ASTM B359M-95 : Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins [Metric] (Withdrawn 2002)

ASTM B36/B36M : Specification for Brass Plate, Sheet, Strip, And Rolled Bar

ASTM B360 : Specification for Hard Drawn Copper Capillary Tube for Restrictor Applications

ASTM B361 : Specification for Factory Made Wrought Aluminum and Aluminum Alloy Welding Fittings

ASTM B362 : Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal

ASTM B363 : Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy WeldingFittings

ASTM B364 : Specification for Tantalum and Tantalum Alloy Ingots

ASTM B365 : Specification for Tantalum and Tantalum Alloy Rod and Wire

ASTM B366 : Specification for Factory Made Wrought Nickel and Nickel Alloy Fittings

ASTM B367 : Specification for Titanium and Titanium Alloy Castings

ASTM B368 : Method for Copper Accelerated Acetic Acid Salt Spray (Fog) Testing (CASS Test)

ASTM B369 : Specification for Copper Nickel Alloy Castings

ASTM B37 : Specification for Aluminum for Use in Iron and Steel Manufacture

ASTM B370 : Specification for Copper Sheet and Strip for Building Construction

ASTM B371/B371M : Specification for Copper Zinc Silicon Alloy Rod

ASTM B371-96 : Specification for Copper-Zinc-Silicon Alloy Rod (Withdrawn 2002)

ASTM B372 : Specification for Seamless Copper and Copper Alloy Rectangular Waveguide Tube

ASTM B373 : Specification for Aluminum Foil for Capacitors

ASTM B374 : Terminology Relating to Electroplating

ASTM B375-63 : Specification for Electrodeposited Coatings of Multilayer Nickel Plus Chromium on Steel (Withdrawn 1966)

ASTM B376-65 : Test Method for Density of Sintered Metal Friction Materials (Withdrawn 1991)

ASTM B377-64 : Specification for Steel Backed Metal Powder Bearing and Bushing Alloys (Withdrawn 1971)

ASTM B378-65 : Test Method for Transverse Rupture Strength of Sintered Metal Friction Materials (Withdrawn 1990)

ASTM B380 : Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the CorrodkoteProcedure

ASTM B381 : Specification for Titanium and Titanium Alloy Forgings

ASTM B382-61 : Specification for Titanium and Titanium Alloy Bare Welding Rods and Electrodes (Withdrawn 1968)

ASTM B38-36 : Methods of Chemical Analysis of Slab Zinc (Spelter) ( Withdrawn 1941)

ASTM B383-64 : Specification for Primary Niobium (Withdrawn 1979)

ASTM B384-74 : Specification for Molybdenum and Molybdenum Alloy Forgings (Withdrawn 1984)

ASTM B385-74 : Specification for Molybdenum and Molybdenum Alloy Billets for Reforging (Withdrawn 1985)

ASTM B386 : Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil

ASTM B387 : Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire

ASTM B388 : Specification for Thermostat Metal Sheet and Strip

ASTM B389 : Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

ASTM B39 : Specification for Nickel

ASTM B390 : Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides

ASTM B391 : Specification for Niobium and Niobium Alloy Ingots

ASTM B392 : Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

ASTM B393 : Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

ASTM B394 : Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

ASTM B395/B395M : Specification for U Bend Seamless Copper and Copper Alloy Heat Exchanger and CondenserTubes

ASTM B395M-95 : Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes [Metric] (Withdrawn 2002)

ASTM B396 : Specification for Aluminum Alloy 5005 H19 Wire for Electrical Purposes (Withdrawn 2003) No Replacement

ASTM B396-00 : Specification for Aluminum-Alloy 5005-H19 Wire for Electrical Purposes (Withdrawn 2003)

ASTM B397 : Specification for Concentric Lay Stranded Aluminum Alloy 5005 H19 Conductors (Withdrawn2003) No Replacement

ASTM B397-85(1999) : Specification for Concentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors (Withdrawn 2003)

ASTM B398/B398M : Specification for Aluminum Alloy 6201 T81 Wire for Electrical Purposes

ASTM B398M-97 : Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes [Metric] (Withdrawn 1999)

ASTM B399/B399M : Specification for Concentric Lay Stranded Aluminum Alloy 6201 T81 Conductors

ASTM B399M-97 : Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors [Metric] (Withdrawn 1999)

ASTM B400 : Specification for Compact Round Concentric Lay Stranded Aluminum 1350 Conductors

ASTM B401 : Specification for Compact Round Concentric Lay Stranded Aluminum Conductors, SteelReinforced (ACSR/COMP)

ASTM B402-86 : Specification for Copper-Nickel Alloy Plate and Sheet for Pressure Vessels (Withdrawn 1986)

ASTM B402M-86 : Specification for Copper-Nickel Alloy Plate and Sheet for Pressure Vessels (Metric) (Withdrawn 1986)

ASTM B403 : Specification for Magnesium Alloy Investment Castings

ASTM B40-36 : Photometric Methods for Chemical Analysis of Aluminum and Aluminum Base Alloys (Withdrawn 1941)

ASTM B404/B404M : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-ExchangerTubes with Integral Fins No Replacement

ASTM B404/B404M-02 : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins

ASTM B404M-95 : Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins (Metric) (Withdrawn 1999)

ASTM B405-63 : Specification for Electrodeposited Coatings of Multi Layer Nickel Plus Chromium on Zinc and Zinc-Base Alloys (Withdrawn 1966)

ASTM B406 : Test Method for Transverse Rupture Strength of Cemented Carbides

ASTM B407 : Specification for Nickel Iron Chromium Alloy Seamless Pipe and Tube

ASTM B408 : Specification for Nickel Iron Chromium Alloy Rod and Bar

ASTM B409 : Specification for Nickel Iron Chromium Alloy Plate, Sheet, and Strip

ASTM B410-68 : Specification for Unalloyed Sintered Tungsten Billets, Bars, Rods, and Performs for Forging (Withdrawn 1979)

ASTM B411/B411M : Specification for Copper Nickel Silicon Alloy Rod and Bar

ASTM B412-95 : Specification for Copper-Nickel-Silicon Alloy Wire (Withdrawn 2000)

ASTM B413 : Specification for Refined Silver

ASTM B41-36 : Method for Chemical Analysis of Nickel (Withdrawn 1941)

ASTM B414-67 : Specification for Primary Hafnium Metal Sponge and Other Forms (Withdrawn 1974)

ASTM B415 : Specification for Hard Drawn Aluminum Clad Steel Wire

ASTM B416 : Specification for Concentric Lay Stranded Aluminum Clad Steel Conductors

ASTM B417 : Test Method for Apparent Density of Non Free Flowing Metal Powders Using the CarneyFunnel

ASTM B418 : Specification for Cast and Wrought Galvanic Zinc Anodes

ASTM B419-64 : Specification for Unalloyed Uranium Castings (Withdrawn 1971)

ASTM B42 : Specification for Seamless Copper Pipe, Standard Sizes

ASTM B420-64 : Specification for Unalloyed Uranium Melting Stock (Withdrawn 1971)

ASTM B421-76 : Test Method for Electrical Resistivity of Cemented Tungsten Carbides (Withdrawn 1987)

ASTM B422 : Specification for Copper Aluminum Silicon Cobalt Alloy, Copper Nickel Silicon MagnesiumAlloy, Copper Nickel Silicon Alloy, Copper Nickel Aluminum Magnesium Alloy, and Copper Nickel TinAlloy Sheet and Strip

ASTM B423 : Specification for Nickel Iron Chromium Molybdenum Copper Alloy (UNS N08825 andN08221)* Seamless Pipe and Tube

ASTM B424 : Specification for Ni Fe Cr Mo Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, andStrip

ASTM B425 : Specification for Ni Fe Cr Mo Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar

ASTM B426-83A : Specification for Sintered Copper-Steel Structural Parts (Withdrawn 1989)

ASTM B427 : Specification for Gear Bronze Alloy Castings

ASTM B427-93a : Specification for Gear Bronze Alloy Castings (Withdrawn 2002)

ASTM B428 : Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

ASTM B429/B429M : Specification for Aluminum Alloy Extruded Structural Pipe and Tube

ASTM B43 : Specification for Seamless Red Brass Pipe, Standard Sizes

ASTM B430 : Test Method for Particle Size Distribution of Refractory Metal Powders and RelatedCompounds by Turbidimetry

ASTM B431-85 : Practice for Processing of Mandrels for Electroforming (Withdrawn 1993)

ASTM B432 : Specification for Copper and Copper Alloy Clad Steel Plate

ASTM B433-70 : Specification for Copper-Nickel Alloys in Ingot Form for Castings (Withdrawn 1975)

ASTM B434 : Specification for Nickel Molybdenum Chromium Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

ASTM B435 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

ASTM B436-71 : Specification for Nickel-Chromium-Molybdenum-Iron-Columbium Alloy (UNS NO6001) Sheet and Plate (Withdrawn 1979)

ASTM B437-67 : Method for Tension Testing of Cemented Carbides (Withdrawn 1980)

ASTM B438/B438M : Specification for Bronze Powder Metallurgy (P/M) Bearing (Oil Impregnated)

ASTM B438M-95A : Specification for Sintered Bronze Bearings (Oil Impregnated) (Metric) (Withdrawn 1998)

ASTM B439 : Specification for Iron Base Sintered Bearings (Oil Impregnated)

ASTM B440 : Specification for Cadmium

ASTM B441 : Specification for Copper Cobalt Beryllium and Copper Nickel Beryllium Rod and Bar (UNSNos. C17500 and C17510)

ASTM B442-80 : Specification for Tough-Pitch Chemically Refined Copper Refinery Shapes (Withdrawn 1993)

ASTM B443 : Specification for Nickel Chromium Molybdenum Columbium Alloy (UNS N06625) and NickelChromium Molybdenum Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip

ASTM B44-33 : Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock (Withdrawn 1936)

ASTM B444 : Specification for Nickel Chromium Molybdenum Columbium Alloys (UNS N06625) and NickelChromium Molybdenum Silicon Alloy (UNS N06219) Pipe and Tube

ASTM B445-87 : Specification for Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Seamless Pipe and Tube (Withdrawn 1995)

ASTM B446 : Specification for Nickel Chromium Molybdenum Columbium Alloy (UNS N06625), NickelChromium Molybdenum Silicon Alloy (UNS N06219), and Nickel Chromium Molybdenum TungstenAlloy (UNS N06650)* Rod and Bar

ASTM B447 : Specification for Welded Copper Tube

ASTM B448-66 : Specification for Magnesium-Alloy Welding Rods and Bare Electrodes (Withdrawn 1968) 

ASTM B449 : Specification for Chromates on Aluminum

ASTM B450-85 : Practice for Engineering Design of Electroformed Articles (Withdrawn 1993)

ASTM B451-93 : Specification for Copper Foil, Strip, and Sheet for Printed Circuits and Carrier Tapes (Withdrawn 1998)

ASTM B452 : Specification for Copper Clad Steel Wire for Electronic Application

ASTM B453/B453M : Specification for Copper Zinc Lead Alloy (Leaded Brass) Rod, Bar, and Shapes

ASTM B45-36 : Methods for Chemical Analysis of Brasses (Withdrawn 1941)

ASTM B453-96 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod (Withdrawn 2001)

ASTM B453M-96 : Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod [Metric] (Withdrawn 2001)

ASTM B454-76 : Specification for Mechanically Deposited Coatings of Cadmium and Zinc on Ferrous Metals (Withdrawn 1981)

ASTM B455 : Specification for Copper Zinc Lead Alloy (Leaded Brass) Extruded Shapes

ASTM B456 : Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and NickelPlus Chromium

ASTM B457 : Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

ASTM B458-83a(1995)e1 : Specification for Sintered Nickel Silver Structural Parts (Withdrawn 2000)

ASTM B459-67 : Specification for Tungsten Base, High Density Metal (Withdrawn 1980)

ASTM B460 : Withdrawn 1992 : Test Method for Dynamic Coefficient of Friction and Wear of Sintered Metal Friction Materials Under Dry Conditions

ASTM B461-67 : Test Method for Frictional Characteristics of Sintered Metal Friction Materials Run in Lubricants (Withdrawn 1990)

ASTM B462 : Specification for Forged or Rolled UNSN06030,N06022,N06035,N06200,N06059,N06686,N08020,N08024,N08026,N08367,N10276,N10665,

ASTM B46-36 : Methods of Chemical Analysis for Sulfur in Special Brasses and Bronzes (Withdrawn 1942)

ASTM B465 : Specification for Copper Iron Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B466/B466M : Specification for Seamless Copper Nickel Pipe and Tube

ASTM B466M-92 : Specification for Seamless Copper-Nickel Pipe and Tube [Metric] (Withdrawn 1998)

ASTM B467 : Specification for Welded Copper Nickel Pipe

ASTM B468 : Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes

ASTM B469-94 : Specification for Seamless Copper-Alloy Tubes for Pressure Applications (Withdrawn 2000)

ASTM B47 : Specification for Copper Trolley Wire

ASTM B470 : Specification for Bonded Copper Conductors for Use in Hookup Wires for ElectronicEquipment

ASTM B471-93 : Specification for UNS NO8020, UNS N08026, and UNS NO8024 Nickel Alloy Spring Wire (Withdrawn 1999)

ASTM B472 : Specification for Nickel Alloy Billets and Bars for Reforging

ASTM B473 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

ASTM B474 : Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

ASTM B475 : Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round WeavingWire

ASTM B476 : Specification for General Requirements for Wrought Precious Metal Electrical ContactMaterials

ASTM B477 : Specification for Gold Silver Nickel Electrical Contact Alloy

ASTM B478 : Test Method for Cross Curvature of Thermostat Metals

ASTM B4-79 : Specification for Tough-Pitch Lake Copper-Refinery Shapes (Withdrawn 1980)

ASTM B479 : Specification for Annealed Aluminum and Aluminum Alloy Foil for Flexible Barrier, FoodContact, and Other Applications

ASTM B48 : Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

ASTM B480 : Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

ASTM B481 : Practice for Preparation of Titanium and Titanium Alloys for Electroplating

ASTM B482 : Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

ASTM B483/B483M : Specification for Aluminum and Aluminum Alloy Drawn Tubes for General PurposeApplications

ASTM B483M-95 : Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General-Purpose Applications (Metric) (Withdrawn 1998)

ASTM B484-83A : Specification for Sintered Nickel Steel Structural Parts (Withdrawn 1989)

ASTM B485-76 : Method for Diametral Compression Testing of Cemented Carbides (Withdrawn 1983)

ASTM B486-74 : Specification for Paste Solder (Withdrawn 1990)

ASTM B487 : Test Method for Measurement of Metal and Oxide Coating Thickness by MicroscopicalExamination of a Cross Section

ASTM B488 : Specification for Electrodeposited Coatings of Gold for Engineering Uses

ASTM B489 : Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited MetalCoatings on Metals

ASTM B49 : Specification for Copper Rod Drawing Stock for Electrical Purposes

ASTM B490 : Practice for Micrometer Bend Test for Ductility of Electrodeposits

ASTM B491/B491M : Specification for Aluminum and Aluminum Alloy Extruded Round Tubes for General PurposeApplications

ASTM B491M-88 : Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General Purpose Applications (Metric) (Withdrawn 1990)

ASTM B492-82 : Specification for Cast Copper-Nickel Ship Tailshaft Sleeves (Withdrawn 1989)

ASTM B493 : Specification for Zirconium and Zirconium Alloy Forgings

ASTM B494/B494M : Specification for Primary Zirconium

ASTM B495 : Specification for Zirconium and Zirconium Alloy Ingots

ASTM B496 : Specification for Compact Round Concentric Lay Stranded Copper Conductors

ASTM B497 : Guide for Measuring Voltage Drop on Closed Arcing Contacts

ASTM B498/B498M : Specification for Zinc Coated (Galvanized) Steel Core Wire for Aluminum Conductors, SteelReinforced (ACSR)

ASTM B498M-93 : Specification for Zinc-Coated (Galvanized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)

ASTM B499 : Endorsed by AmericanElectroplaters/ SocietyEndorsed by NationalAssociation of MetalFinishersTest Method for Measurement of Coating Thicknesses by the MagneticMethod :

ASTM B500/B500M : Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, SteelReinforced (ACSR)

ASTM B500M-97 : Specification for Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)

ASTM B501 : Specification for Silver Coated, Copper Clad Steel Wire for Electronic Application

ASTM B502 : Specification for Aluminum Clad Steel Core Wire for Aluminum Conductors, Aluminum CladSteel Reinforced

ASTM B50-29 : Specification for Non-Ferrous Insect Screen Cloth (Withdrawn 1936)

ASTM B503-69 : Practice for Use of Copper and Nickel Electroplating Solutions for Electroforming (Withdrawn 1993)

ASTM B504 : Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

ASTM B505/B505M : Specification for Copper Base Alloy Continuous Castings

ASTM B506-81 : Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction (Withdrawn 1993)

ASTM B507 : Practice for Design of Articles To Be Electroplated on Racks

ASTM B508 : Specification for Copper Alloy Strip for Flexible Metal Hose

ASTM B509-77 : Specification for Supplementary Requirements for Nickel Alloy Plate for Nuclear Applications (Withdrawn 1990)

ASTM B510-77 : Specification for Supplementary Requirements for Nickel Alloy Rod and Bar for Nuclear Applications (Withdrawn 1990)

ASTM B511 : Specification for Nickel Iron Chromium Silicon Alloy Bars and Shapes

ASTM B512 : Specification for Nickel Chromium Silicon Alloy (UNS N08330) Billets and Bars

ASTM B513-79 : Specification for Pipe Supplementary Requirements for Nickel Alloy Seamless Pipe and Tube for Nuclear Applications (Withdrawn 1990)

ASTM B514 : Specification for Welded Nickel Iron Chromium Alloy Pipe

ASTM B51-42 : Test Method for Phospher Tin (Withdrawn 1944)

ASTM B515 : Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 AlloyTubes

ASTM B516 : Specification for Welded Nickel Chromium Iron Alloy (UNS N06600, UNS N06603, UNSN06025, and UNS N06045 Tubes

ASTM B517 : Specification for Welded Nickel Chromium Iron Alloy (UNS N06600, UNS N06603, UNSN06025, and UNS N06045) Pipe

ASTM B518-87 : Specification for Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Rod and Bar (Withdrawn 1995)

ASTM B519-92 : Specification for Nickel-Chromium-Iron-Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Plate, Sheet, and Strip (Withdrawn 1995)

ASTM B520 : Specification for Tin Coated, Copper Clad Steel Wire for Electronic Application

ASTM B521 : Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

ASTM B522 : Specification for Gold Silver Platinum Electrical Contact Alloy

ASTM B523/B523M : Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

ASTM B524/B524M : Specification for Concentric Lay Stranded Aluminum Conductors, Aluminum Alloy Reinforced(ACAR, 1350/6201)

ASTM B52-48 : Specification for Phospher Copper (Withdrawn 1979)

ASTM B524M-97 : Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201) [Metric] (Withdrawn 1999)

ASTM B525-83A : Specification for Sintered Austenitic Stainless Steel Structural Parts (Withdrawn 1989)

ASTM B526-70 : Test Method for Coefficient of Friction and Wear of Sintered Metals Friction Materials Under Dry Clutch Conditions (Withdrawn 1990)

ASTM B527 : Test Method for Determination of Tap Density of Metallic Powders and Compounds

ASTM B528 : Test Method for Transverse Rupture Strength of Metal Powder Specimens

ASTM B529-70 : Test Method for Measurement of Coating Thickness by the Eddy Current Test Method : Non-Conductive Coating on Non-Magnetic Basis Metals (Withdrawn 1978)

ASTM B530 : Test Method for Measurement of Coating Thicknesses by the Magnetic Method :

ASTM B531 : Specification for Aluminum Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn2003) No Replacement

ASTM B531-90(1998)e1 : Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes (Withdrawn 2003)

ASTM B532 : Specification for Appearance of Electroplated Plastic Surfaces

ASTM B533 : Test Method for Peel Strength of Metal Electroplated Plastics

ASTM B534 : Specification for Copper Cobalt Beryllium Alloy and Copper Nickel Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B53-46 : Specification for Silicon Copper (Withdrawn 1979)

ASTM B535 : Specification for Nickel Iron Chromium Silicon Alloys (UNS N08330 and N08332) SeamlessPipe and Tube

ASTM B536 : Specification for Nickel Iron Chromium Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

ASTM B537 : Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

ASTM B538-70 : Method of Fact (Ford Anodized Aluminum Corrosion Test) (Withdrawn 1986)

ASTM B539 : Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

ASTM B540 : Specification for Palladium Electrical Contact Alloy

ASTM B541 : Specification for Gold Electrical Contact Alloy

ASTM B543 : Specification for Welded Copper and Copper Alloy Heat Exchanger Tube

ASTM B54-39 : Specification for High-Strength Yellow Brass (Manganese Bronze) and Leaded High-Strength Yellow Brass (Leaded Manganese Bronze) Sand Castings (Withdrawn 1940)

ASTM B543M-91 : Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube [Metric] (Withdrawn 2000)

ASTM B544-71 : Specification for Round Solid EC Grade Aluminum Conductor (Withdrawn 1977)

ASTM B545 : Specification for Electrodeposited Coatings of Tin

ASTM B546 : Specification for Electric Fusion Welded Ni Cr Co Mo Alloy (UNS N06617), Ni Fe Cr Si Alloys(UNS N08330 and UNS N08332), Ni Cr Fe Al Alloy (UNS N06603), Ni Cr Fe Alloy (UNS N06025), andNi Cr Fe Si Alloy (UNS N06045) Pipe

ASTM B547/B547M : Specification for Aluminum and Aluminum Alloy Formed and Arc Welded Round Tube

ASTM B548 : Test Method for Ultrasonic Inspection of Aluminum Alloy Plate for Pressure Vessels

ASTM B549 : Specification for Concentric Lay Stranded Aluminum Conductors, Aluminum Clad SteelReinforced (ACSR/AW)

ASTM B550/B550M : Specification for Zirconium and Zirconium Alloy Bar and Wire

ASTM B551/B551M : Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

ASTM B552 : Specification for Seamless and Welded Copper Nickel Tubes For Water Desalting Plants

ASTM B55-33 : Specification for Seamless 70-30 Brass Condenser Tubes and Ferrule Stock (Withdrawn 1936)

ASTM B553-79 : Test Method for Thermal Cycling of Electroplated Plastics (Withdrawn 1991)

ASTM B554-85 : Recommended Practice for Measurement of Thickness of Metallic Coatings on Nonmetallic Substrates (Withdrawn 1986)

ASTM B555 : Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by the DroppingTest

ASTM B556 : Guide for Measurement of Thin Chromium Coatings by Spot Test

ASTM B557 : Test Methods for Tension Testing Wrought and Cast Aluminum and Magnesium AlloyProducts

ASTM B557M : Test Methods for Tension Testing Wrought and Cast Aluminum and Magnesium AlloyProducts [Metric]

ASTM B558 : Practice for Preparation of Nickel Alloys for Electroplating

ASTM B559 : Specification for Nickel Coated, Copper Clad Steel Wire for Electronic Application

ASTM B560 : Specification for Modern Pewter Alloys

ASTM B561 : Specification for Refined Platinum

ASTM B562 : Specification for Refined Gold

ASTM B563 : Specification for Palladium Silver Copper Electrical Contact Alloy

ASTM B56-33 : Specification for Seamless Muntz Metal Condenser Tubes and Ferrule Stock (Withdrawn 1936)

ASTM B564 : Specification for Nickel Alloy Forgings

ASTM B565 : Test Method for Shear Testing of Aluminum and Aluminum Alloy Rivets and Cold HeadingWire and Rods

ASTM B566 : Specification for Copper Clad Aluminum Wire

ASTM B567 : Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

ASTM B568 : Test Method for Measurement of Coating Thickness by X Ray Spectrometry

ASTM B569 : Specification for Brass Strip in Narrow Widths and Light Gage for Heat Exchanger Tubing

ASTM B570 : Specification for Copper Beryllium Alloy (UNS No. C17000 and C17200) Forgings andExtrusions

ASTM B571 : Practice for Qualitative Adhesion Testing of Metallic Coatings

ASTM B572 : Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

ASTM B57-27 : Specification for Copper-Alloy Condenser Tube Plates (Withdrawn 1941)

ASTM B573 : Specification for Nickel Molybdenum Chromium Iron Alloy (UNS N10003, N10242)* Rod

ASTM B574 : Specification for Low Carbon Nickel Chromium Molybdenum, Low Carbon NickelMolybdenum Chromium Tantalum, Low Carbon Nickel Chromium Molybdenum Copper, and LowCarbon Nickel Chromium Molybdenum Tungsten Alloy Rod

ASTM B575 : Specification for Low Carbon Nickel Chromium Molybdenum, Low Carbon Nickel ChromiumMolybdenum Copper, Low Carbon Nickel Chromium Molybdenum Tantalum, and Low Carbon NickelChromium Molybdenum Tungsten Alloy Plate, Sheet, and Strip

ASTM B576 : Guide for Arc Erosion Testing of Electrical Contact Materials

ASTM B577 : Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) inCopper

ASTM B578 : Test Method for Microhardness of Electroplated Coatings

ASTM B579 : Specification for Electrodeposited Coatings of Tin Lead Alloy (Solder Plate)

ASTM B580 : Specification for Anodic Oxide Coatings on Aluminum

ASTM B581 : Specification for Nickel Chromium Iron Molybdenum Copper Alloy Rod

ASTM B582 : Specification for Nickel Chromium Iron Molybdenum Copper Alloy Plate, Sheet, and Strip

ASTM B583-83 : Test Method for Porosity in Cold Coatings on Metal Substrates (Withdrawn 1985)

ASTM B584 : Specification for Copper Alloy Sand Castings for General Applications

ASTM B58-44 : Specification for Aluminum-Base Alloys in Ingot Form for Sand Castings (Withdrawn 1945)

ASTM B585-86 : Specification for Seamless Copper-Alloy Water Tube (Withdrawn 1988)

ASTM B586-86 : Specification for Welded Copper-Alloy Water Tube (Withdrawn 1987)

ASTM B587 : Specification for Welded Brass Tube

ASTM B588 : Test Method for Measurement of Thickness of Transparent or Opaque Coatings by DoubleBeam Interference Microscope Technique

ASTM B589 : Specification for Refined Palladium

ASTM B590-73 : Specification for Nickel-Iron-Chromium-Manganese-Molybdenum Alloy (UNS NO8245) Plate, Sheet, and Strip (Withdrawn 1980)

ASTM B591 : Specification for Copper Zinc Tin and Copper Zinc Tin Iron Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

ASTM B592 : Specification for Copper Zinc aluminum Cobalt Alloy, Copper Zinc Tin Iron Alloy Plate, Sheet, Strip, and Rolled Bar

ASTM B593 : Test Method for Bending Fatigue Testing for Copper Alloy Spring Materials

ASTM B59-39 : Specification for Aluminum-Bronze Sand Castings (Withdrawn 1940)

ASTM B594 : Practice for Ultrasonic Inspection of Aluminum Alloy Wrought Products for AerospaceApplications

ASTM B595 : Specification for Sintered Aluminum Structural Parts

ASTM B596 : Specification for Gold Copper Alloy Electrical Contact Material

ASTM B597 : Practice for Heat Treatment of Aluminum Alloys (Withdrawn 2002) Replaced by B917,B918 0 ASTM 0

ASTM B597-92(1998) : Practice for Heat Treatment of Aluminum Alloys (Withdrawn 2002)

ASTM B598 : Practice for Determining Offset Yield Strength in Tension for Copper Alloys

ASTM B599 : Specification for Nickel Iron Chromium Molybdenum Columbium Stabilized Alloy (UNSN08700) Plate, Sheet, and Strip

ASTM B600 : Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

ASTM B601 : Classification for Temper Designations for Copper and Copper Alloys/Wrought and Cast

ASTM B602 : Test Method for Attribute Sampling of Metallic and Inorganic Coatings

ASTM B603 : Specification for Drawn or Rolled Iron Chromium Aluminum Alloys for Electrical HeatingElements

ASTM B604 : Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium onPlastics

ASTM B60-41 : Specification for Tin-Bronze and Leaded Tin-Bronze Sand Castings (Withdrawn 1943)

ASTM B605 : Specification for Electrodeposited Coatings of Tin Nickel Alloy

ASTM B606 : Specification for High Strength Zinc Coated (Galvanized) Steel Core Wire for Aluminum andAluminum Alloy Conductors, Steel Reinforced

ASTM B607 : Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

ASTM B608 : Specification for Welded Copper Alloy Pipe

ASTM B609/B609M : Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, forElectrical Purposes

ASTM B609M-97 : Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes [Metric] (Withdrawn 1999)

ASTM B61 : Specification for Steam or Valve Bronze Castings

ASTM B611 : Test Method for Abrasive Wear Resistance of Cemented Carbides

ASTM B612 : Specification for Iron Bronze Sintered Bearings (Oil Impregnated)

ASTM B613 : Guide for Preparing Specifications for Miniature Brushes of Composite Materials for SlidingElectric Contacts

ASTM B614 : Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

ASTM B615 : Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

ASTM B616 : Specification for Refined Rhodium

ASTM B617 : Specification for Coin Silver Electrical Contact Alloy

ASTM B618 : Specification for Aluminum Alloy Investment Castings

ASTM B619 : Specification for Welded Nickel and Nickel Cobalt Alloy Pipe

ASTM B61-93 : Specification for Steam or Valve Bronze Castings (Withdrawn 2002)

ASTM B62 : Specification for Composition Bronze or Ounce Metal Castings

ASTM B620 : Specification for Nickel Iron Chromium Molybdenum Alloy (UNS N08320) Plate, Sheet, andStrip

ASTM B621 : Specification for Nickel Iron Chromium Molybdenum Alloy (UNS N08320) Rod

ASTM B622 : Specification for Seamless Nickel and Nickel Cobalt Alloy Pipe and Tube

ASTM B623-93 : Specification for Tough-Pitch Fire-Refined High-Conductivity Copper-Refinery Shapes (Withdrawn 1996)

ASTM B624 : Specification for High Strength, High Conductivity Copper Alloy Wire for ElectronicApplication

ASTM B625 : Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, andUNS R20033 Plate, Sheet, and Strip

ASTM B626 : Specification for Welded Nickel and Nickel Cobalt Alloy Tube

ASTM B627-84(1992)e1 : Test Method for Electrolytic Corrosion Testing (EC Test) (Withdrawn 1998)

ASTM B628 : Specification for Silver Copper Eutectic Electrical Contact Alloy

ASTM B629 : Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

ASTM B62-93 : Specification for Composition Bronze or Ounce Metal Castings (Withdrawn 2002)

ASTM B63 : Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials

ASTM B630 : Practice for Preparation of Chromium for Electroplating with Chromium

ASTM B631 : Specification for Silver Tungsten Electrical Contact Materials

ASTM B632/B632M : Specification for Aluminum Alloy Rolled Tread Plate

ASTM B632M- : Withdrawn 1993 Replaced by B 632/B62M : Specification for Aluminum-Alloy Rolled Tread Plate [Metric]

ASTM B633 : Specification for Electrodeposited Coatings of Zinc on Iron and Steel

ASTM B634 : Specification for Electrodeposited Coatings of Rhodium for Engineering Use

ASTM B635 : Specification for Coatings of Cadmium Tin Mechanically Deposited

ASTM B636 : Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the SpiralContractometer

ASTM B637 : Specification for Precipitation Hardening Nickel Alloy Bars, Forgings, and Forging Stock forHigh Temperature Service

ASTM B638 : Withdrawn 1992 : Specification for Copper and Copper-Alloy Solar Heat Absorber Panels

ASTM B639 : Specification for Precipitation Hardening Cobalt Containing Alloys (UNS R30155 and UNSR30816) Rod, Bar, Forgings, and Forging Stock for High Temperature Service

ASTM B640 : Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

ASTM B641-93 : Specification for Seamless and Welded Copper Distribution Tube (Type D) (Withdrawn

ASTM B642 : Withdrawn 1994 : Specification for Welded Copper Alloy UNS C21000 Water Tube

ASTM B643 : Specification for Copper Beryllium Alloy Seamless Tube

ASTM B644 : Specification for Copper Alloy Addition Agents

ASTM B64-43 : Specification for Brazing Solder (Withdrawn 1951)

ASTM B646 : Practice for Fracture Toughness Testing of Aluminum Alloys

ASTM B647 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster HardnessGage

ASTM B648 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

ASTM B649 : Specification for Ni Fe Cr Mo Cu N Low Carbon Alloys (UNS N08925, UNS N08031, UNSN08354, and UNS N08926), and Cr Ni Fe N Low Carbon Alloy (UNS R20033) Bar and Wire

ASTM B650 : Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

ASTM B651 : Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper PlusNickel Plus Chromium Electroplated Surfaces with Double Beam Interference Microscope

ASTM B652/B652M : Specification for Niobium Hafnium Alloy Ingots

ASTM B65-28 : Specification for Lead Yellow Brass Sand Castings for General Purposes (Withdrawn 1937)

ASTM B653/B653M : Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

ASTM B654/B654M : Specification for Niobium Hafnium Alloy Foil, Sheet, Strip, and Plate

ASTM B655/B655M : Specification for Niobium Hafnium Alloy Bar, Rod, and Wire

ASTM B656-91 : Guide for Autocatalytic (Electroless) Nickel-Phosphorus Deposition on Metals for Engineering Use (Withdrawn 2000)

ASTM B657 : Guide for Metallographic Identification of Microstructure in Cemented Carbides

ASTM B658/B658M : Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

ASTM B659 : Guide for Measuring Thickness of Metallic and Inorganic Coatings

ASTM B66 : Specification for Bronze Castings for Steam Locomotive Wearing Parts

ASTM B660 : Practices for Packaging/Packing of Aluminum and Magnesium Products

ASTM B661 : Practice for Heat Treatment of Magnesium Alloys

ASTM B662 : Specification for Silver Molybdenum Electrical Contact Material

ASTM B663 : Specification for Silver Tungsten Carbide Electrical Contact Material

ASTM B664 : Specification for 80% Silver 20% Graphite Sliding Contact Material

ASTM B665 : Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

ASTM B666/B666M : Practice for Identification Marking of Aluminum and Magnesium Products

ASTM B666M-90 : Practice for Indentification Marking of Aluminum Products (Metric) (Withdrawn 1992)

ASTM B667 : Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance

ASTM B668 : Specification for UNS N08028 Seamless Pipe and Tube

ASTM B669-97 : Specification for Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings (Withdrawn 1999)

ASTM B67 : Specification for Car and Tender Journal Bearings, Lined

ASTM B670 : Specification for Precipitation Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Stripfor High Temperature Service

ASTM B671 : Specification for Refined Iridium

ASTM B672 : Specification for Nickel Iron Chromium Molybdenum Columbium Stabilized Alloy (UNSN08700) Bar and Wire

ASTM B673 : Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

ASTM B674 : Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

ASTM B675 : Specification for UNS N08367 Welded Pipe

ASTM B676 : Specification for UNS N08367 Welded Tube

ASTM B677 : Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

ASTM B678 : Test Method for Solderability of Metallic Coated Products

ASTM B679 : Specification for Electrodeposited Coatings of Palladium for Engineering Use

ASTM B67-93a : Specification for Car and Tender Journal Bearings, Lined (Withdrawn 2002)

ASTM B68 : Specification for Seamless Copper Tube, Bright Annealed

ASTM B680 : Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

ASTM B681-88(1994) : Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope (Withdrawn 2001)

ASTM B682 : Specification for Standard Metric Sizes of Electrical Conductors

ASTM B683 : Specification for Pure Palladium Electrical Contact Material

ASTM B684 : Specification for Platinum Iridium Electrical Contact Materials

ASTM B685 : Specification for Palladium Copper Electrical Contact Material

ASTM B686 : Specification for Aluminum Alloy Castings, High Strength

ASTM B687 : Specification for Brass, Copper, and Chromium Plated Pipe Nipples

ASTM B688 : Specification for Chromium Nickel Molybdenum Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

ASTM B689 : Specification for Electroplated Engineering Nickel Coatings

ASTM B68M : Specification for Seamless Copper Tube, Bright Annealed [Metric]

ASTM B69 : Specification for Rolled Zinc

ASTM B690 : Specification for Iron Nickel Chromium Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

ASTM B691 : Specification for Iron Nickel Chromium Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

ASTM B692 : Specification for 75% Silver 25% Graphite Sliding Contact Material

ASTM B693 : Specificationfor Silver Nickel Electrical Contact Materials

ASTM B694 : Specification for Copper, Copper Alloy, Copper Clad Bronze (CCB), Copper Clad StainlessSteel (CCS), and Copper Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

ASTM B695 : Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

ASTM B696 : Specification for Coatings of Cadmium Mechanically Deposited

ASTM B697 : Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic andInorganic Coatings

ASTM B698 : Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

ASTM B699 : Specification for Coatings of Cadmium Vacuum Deposited on Iron and Steel

ASTM B70 : Test Method for Change of Resistance With Temperature of Metallic Materials for ElectricalHeating

ASTM B700 : Specification for Electrodeposited Coatings of Silver for Engineering Use

ASTM B701/B701M : Specification for Concentric Lay Stranded Self Damping Aluminum Conductors, SteelReinforced (ACSR/SD)

ASTM B702 : Specification for Copper Tungsten Electrical Contact Material

ASTM B704 : Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

ASTM B705 : Specification for Nickel Alloy (UNS N06625, N06219 and N08825) Welded Pipe

ASTM B706 : Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

ASTM B707M-88 : Specification for Seamless Copper Water Tube (Special Use) (Metric) (Withdrawn 1991)

ASTM B708 : Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

ASTM B709 : Specification for Iron Nickel Chromium Molybdenum Alloy (UNS N08028)* Plate, Sheet, andStrip

ASTM B710 : Specification for Nickel Iron Chromium Silicon Alloy Welded Pipe

ASTM B711 : Specification for Concentric Lay Stranded Aluminum Alloy Conductors, Steel Reinforced(AACSR) (6201)

ASTM B712 : Guide for Determination of Sodium and Potassium Content For Silver Cadmium Oxide Contact Materials

ASTM B71-34 : Methods of Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1941)

ASTM B713-82(1997)e1 : Terminology Relating to Superconductors (Withdrawn 2001)

ASTM B714-82(1997)e1 : Test Method for D-C Critical Current of Composite Superconductors (Withdrawn 2001)

ASTM B715 : Specification for Sintered Copper Structural Parts for Electrical Conductivity Applications

ASTM B716-93 : Specification for Welded Copper Water Tube (Withdrawn 1994)

ASTM B716M-93 : Specification for Welded Copper Water Tube (Metric) (Withdrawn 1994)

ASTM B717 : Specification for Refined Ruthenium

ASTM B718 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Plate, Sheet, and Strip

ASTM B719 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Bar

ASTM B720-93 : Specification for Seamless UNS N08310 Tube (Withdrawn 1999)

ASTM B721 : Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts(Withdrawn 2004) Replaced by B931,B933,B934

ASTM B721-91(1999) : Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts (Withdrawn 2004)

ASTM B722 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Seamless Pipe and Tube

ASTM B723 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Welded Pipe

ASTM B724 : Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non Caliper Type Instrument

ASTM B725 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNSN04400) Pipe

ASTM B726 : Specification for Nickel Chromium Molybdenum Cobalt Tungsten Iron Silicon Alloy (UNSN06333) Welded Tube

ASTM B727 : Practice for Preparation of Plastics Materials for Electroplating

ASTM B72-72 : Specification for Fire-Refined Casting Copper (Withdrawn 1976)

ASTM B727-83(1995) : Practice for Preparation of Plastics Materials for Electroplating (Withdrawn 2004)

ASTM B728-84 : Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors (Withdrawn 1988)

ASTM B729 : Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel Alloy Pipeand Tube

ASTM B730-93 : Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube (Withdrawn 2002)

ASTM B731 : Specification for 60% Palladium 40% Silver Electrical Contact Material

ASTM B732-84(1993)e1 : Test Method for Evaluating the Corrosivity of Solder Fluxes for Copper Tubing Systems (Withdrawn 1998)

ASTM B73-29 : Specification for Silver Solders (Withdrawn 1952)

ASTM B733 : Specification for Autocatalytic (Electroless) Nickel Phosphorus Coatings on Metal

ASTM B734 : Specification for Electrodeposited Copper for Engineering Uses

ASTM B735 : Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

ASTM B736 : Specification for Aluminum, Aluminum Alloy and Aluminum Clad Steel Cable Shielding Stock

ASTM B737 : Specification for Hot Rolled and/or Cold Finished Hafnium Rod and Wire

ASTM B738 : Specification for Fine Wire Bunch Stranded and Rope Lay Bunch Stranded CopperConductors for Use as Electrical Conductors

ASTM B7-39 : Specification for Tough-Pitch Lake Copper-Refinery Shapes (Withdrawn 1940)

ASTM B739 : Specification for Nickel Iron Chromium Silicon Alloy Welded Tube

ASTM B740 : Specification for Copper Nickel Tin Spinodal Alloy Strip

ASTM B741 : Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography(Withdrawn 2005) No Replacement

ASTM B741-95(2000) : Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography (Withdrawn 2005)

ASTM B742 : Specification for Fine Silver Electrical Contact Fabricated Material

ASTM B743 : Specification for Seamless Copper Tube in Coils

ASTM B74-32 : Specification for High-Leaded Tin-Bronze Sand Castings (Withdrawn 1940)

ASTM B744/B744M : Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe

ASTM B745/B745M : Specification for Corrugated Aluminum Pipe for Sewers and Drains

ASTM B746/B746M : Specification for Corrugated Aluminum Alloy Structural Plate for Field Bolted Pipe, PipeArches, and Arches

ASTM B747 : Specification for Copper Zirconium Alloy Sheet and Strip

ASTM B748 : Test Method for Measurement of Thickness of Metallic Coatings by Measurement of CrossSection with a Scanning Electron Microscope

ASTM B749 : Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

ASTM B75 : Specification for Seamless Copper Tube

ASTM B750 : Specification for GALFAN (Zinc 5 % Aluminum Mischmetal) Alloy in Ingot Form for Hot DipCoatings

ASTM B751 : Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

ASTM B752 : Specification for Castings, Zirconium Base, Corrosion Resistant, for General Application

ASTM B753 : Specification for Thermostat Component Alloys

ASTM B754 : Test Method for Measuring and Recording the Deviations from Flatness in Copper andCopper Alloy Strip

ASTM B755 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

ASTM B756 : Specification for Nickel Chromium Molybdenum Tungsten Alloy (UNS N06110) Rod and Bar

ASTM B757 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Welded Pipe

ASTM B758 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Welded Tube

ASTM B759 : Specification for Nickel Chromium Molybdenum Tungsten Alloys (UNS N06110) Pipe andTube

ASTM B75M : Specification for Seamless Copper Tube [Metric]

ASTM B76 : Test Method for Accelerated Life of Nickel Chromium and Nickel Chromium Iron Alloys forElectrical Heating

ASTM B760 : Specification for Tungsten Plate, Sheet, and Foil

ASTM B761 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by XRay Monitoring of Gravity Sedimentation

ASTM B762 : Test Method of Variables Sampling of Metallic and Inorganic Coatings

ASTM B763 : Specification for Copper Alloy Sand Castings for Valve Applications

ASTM B764 : Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual

ASTM B765 : Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and RelatedMetallic Coatings

ASTM B766 : Specification for Electrodeposited Coatings of Cadmium

ASTM B767 : Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings byGravimetric and Other Chemical Analysis Procedures

ASTM B768 : Specification for Copper Cobalt Beryllium Alloy and Copper Nickel Beryllium Alloy Strip andSheet

ASTM B769 : Test Method for Shear Testing of Aluminum Alloys

ASTM B77 : Test Method for Thermoelectric Power of Electrical Resistance Alloys

ASTM B770 : Specification for Copper Beryllium Alloy Sand Castings for General Applications

ASTM B771 : Test Method for Short Rod Fracture Toughness of Cemented Carbides

ASTM B772 : Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing andNonarcing)

ASTM B773 : Guide for Ultrasonic C Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies

ASTM B774 : Specification for Low Melting Point Alloys

ASTM B775 : Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

ASTM B776 : Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

ASTM B777 : Specification for Tungsten Base, High Density Metal

ASTM B778 : Specification for Shaped Wire Compact Concentric Lay Stranded Aluminum Conductors(AAC/TW)

ASTM B779 : Specification for Shaped Wire Compact Concentric Lay Stranded Aluminum Conductors, Steel Reinforced (ACSR/TW)

ASTM B78 : Test Method of Accelerated Life of Iron Chromium Aluminum Alloys for Electrical Heating

ASTM B780 : Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy

ASTM B781 : Guide for Silver Cadmium Oxide Contact Material

ASTM B782 : Specification for Iron Graphite Sintered Bearings (Oil Impregnated)

ASTM B783 : Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts

ASTM B784 : Specification for Modified Concentric Lay Stranded Copper Conductors for Use in InsulatedElectrical Cables

ASTM B785-93 : Specification for Compact Round Modified Concentric-Lay-Stranded Copper Conductors For Use in Insulated Electrical Cables (Withdrawn 1998)

ASTM B786 : Specification for 19 Wire Combination Unilay Stranded Aluminum Conductors for SubsequentInsulation

ASTM B787/B787M : Specification for 19 Wire Combination Unilay Stranded Copper Conductors for SubsequentInsulation

ASTM B788/B788M : Practice for Installing Factory Made Corrugated Aluminum Culverts and Storm Sewer Pipe

ASTM B789/B789M : Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

ASTM B790/B790M : Practice for Structural Design of Corrugated Aluminum Pipe, Pipe Arches, and Arches forCulverts, Storm Sewers, and Other Buried Conduits

ASTM B791-97 : Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Withdrawn 1999)

ASTM B792 : Specification for Zinc Alloys in Ingot Form for Slush Casting

ASTM B793 : Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic InjectionMolds

ASTM B794 : Test Method for Durability Wear Testing of Separable Electrical Connector Systems UsingElectrical Resistance Measurements

ASTM B79-44 : Specification for Aluminum and Aluminum Alloy Sheet and Plate (Withdrawn 1945)

ASTM B795 : Test Method for Determining the Percentage of Alloyed or Unalloyed Iron ContaminationPresent in Powder Forged (P/F) Steel Parts

ASTM B796 : Test Method for Nonmetallic Inclusion Content of Powders Intended for Powder Forging(P/F) Applications

ASTM B797 : Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle OxideNetworks in Powder Forged (P/F) Steel Parts

ASTM B798 : Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel BulkElectrography

ASTM B799 : Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur DioxideVapor

ASTM B8 : Specification for Concentric Lay Stranded Copper Conductors, Hard, Medium Hard, or Soft

ASTM B80 : Specification for Magnesium Alloy Sand Castings

ASTM B800 : Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes Annealed andIntermediate Tempers

ASTM B801 : Specification for Concentric Lay Stranded Conductors of 8000 Series Aluminum Alloy forSubsequent Covering or Insulation

ASTM B802/B802M : Specification for Zinc 5% Aluminum Mischmetal Alloy Coated Steel Core Wire for AluminumConductors, Steel Reinforced (ACSR)

ASTM B802M-94 : Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) [Metric] (Withdrawn 1998)

ASTM B803 : Specification for High Strength Zinc 5% Aluminum Mischmetal Alloy Coated Steel Core Wirefor Aluminum and Aluminum Alloy Conductors, Steel Reinforced

ASTM B804 : Specification for UNS N08367 and UNS N08926 Welded Pipe

ASTM B805 : Specification for Precipitation Hardening Nickel Alloys UNS N07716, N07725, N07773, N07776, and N09777, Bar and Wire

ASTM B806 : Specification for Copper Alloy Permanent Mold Castings for General Applications

ASTM B806-93a : Specification for Copper Alloy Permanent Mold Castings for General Applications (Withdrawn 2002)

ASTM B807/B807M : Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

ASTM B808 : Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz CrystalMicrobalances

ASTM B809 : Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers of Sulfur”)

ASTM B810 : Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass ofCopper Coupons

ASTM B811 : Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

ASTM B812 : Test Method for Resistance to Environmental Degradation of Electrical Pressure ConnectionsInvolving Aluminum and Intended for Residential Applications

ASTM B813 : Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

ASTM B814 : Specification for Nickel Chromium Iron Molybdenum Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

ASTM B815 : Specification for Cobalt Chromium Nickel Molybdenum Tungsten Alloy (UNS R31233) Rod

ASTM B816 : Specification for Coatings of Cadmium Zinc Mechanically Deposited

ASTM B817 : Specification for Powder Metallurgy (P/M) Titanium Alloy Structural Components

ASTM B818 : Specification for Cobalt Chromium Nickel Molybdenum Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

ASTM B819 : Specification for Seamless Copper Tube for Medical Gas Systems

ASTM B820 : Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

ASTM B821 : Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle SizeAnalysis

ASTM B822 : Test Method for Particle Size Distribution of Metal Powders and Related Compounds by LightScattering

ASTM B824 : Specification for General Requirements for Copper Alloy Castings

ASTM B825 : Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

ASTM B82-57 : Specification for Drawn or Rolled Alloy 80 Percent Nickel, 20 Percent Chromium, for Electrical-Heating Elements (Withdrawn 1957)

ASTM B826 : Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

ASTM B827 : Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

ASTM B828 : Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube andFittings

ASTM B829 : Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

ASTM B830 : Specification for Uniform Test Methods and Frequency

ASTM B831 : Test Method for Shear Testing of Thin Aluminum Alloy Products

ASTM B832 : Guide for Electroforming with Nickel and Copper

ASTM B833 : Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the CorrosionProtection of Steel

ASTM B834 : Specification for Pressure Consolidated Powder Metallurgy Iron Nickel ChromiumMolybdenum (UNS N08367) and Nickel Chromium Molybdenum Columbium (Nb) (UNS N06625) AlloyPipe Flanges, Fittings, Valves, and Parts

ASTM B835 : Specification for Compact Round Stranded Copper Conductors Using Single Input WireConstruction

ASTM B83-52 : Specification for Drawn or Rolled Alloy, 60 Percent Nickel, 16 Percent Chromium, and Balance Iron, for Electrical-Heating Elements (Withdrawn 1957)

ASTM B836 : Specification for Compact Round Stranded Aluminum Conductors Using Single Input WireConstruction

ASTM B839 : Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles,

ASTM B84 : Test Method for Temperature Resistance Constants of Alloy Wires for Precision Resistors

ASTM B840 : Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits

ASTM B841 : Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits

ASTM B842 : Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits

ASTM B843 : Specification for Magnesium Alloy Anodes for Cathodic Protection

ASTM B844 : Guide for Silver Tin Oxide Contact Material

ASTM B845 : Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

ASTM B847-94 : Specification for Tinned Hard-Drawn and Medium-Hard/Drawn Copper Wire for Electrical Purposes

ASTM B848 : Specification for Powder Forged (P/F) Ferrous Materials

ASTM B849 : Specification for Pre Treatments of Iron or Steel for Reducing Risk of HydrogenEmbrittlement

ASTM B85 : Specification for Aluminum Alloy Die Castings

ASTM B850 : Guide for Post Coating Treatments of Steel for Reducing the Risk of HydrogenEmbrittlement

ASTM B851 : Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel,

ASTM B851-94 : Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish (Withdrawn 2004)

ASTM B852 : Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot Dip Galvanizing ofSheet Steel

ASTM B853 : Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components

ASTM B854 : Guide for Measuring Electrical Contact Intermittences

ASTM B855 : Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel

ASTM B856 : Specification for Concentric Lay Stranded Aluminum Conductors, Coated Steel Supported(ACSS)

ASTM B857 : Specification for Shaped Wire Compact Concentric Lay Stranded Aluminum Conductors, Coated Steel Supported (ACSS/TW)

ASTM B858 : Test Method for Ammonia Vapor Test for Determination Susceptibility to Stress CorrosionCracking in Copper Alloys

ASTM B859 : Practice for De Agglomeration of Refractory Metal Powders and Their Compounds Prior toParticle Size Analysis

ASTM B86 : Specification for Zinc and Zinc Aluminum (ZA) Alloy Foundry and Die Castings

ASTM B860 : Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

ASTM B861 : Specification for Titanium and Titanium Alloy Seamless Pipe

ASTM B862 : Specification for Titanium and Titanium Alloy Welded Pipe

ASTM B863 : Specification for Titanium and Titanium Alloy Wire

ASTM B864/B864M : Specification for Corrugated Aluminum Box Culverts

ASTM B865 : Specification for Precipitation Hardening Nickel Copper Aluminum Alloy (UNS N05500) Bar,

ASTM B866 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by PolysulfideImmersion

ASTM B867 : Specification for Electrodeposited Coatings of Palladium Nickel for Engineering Use

ASTM B868 : Practice for Contact Performance Classification of Electrical Connection Systems

ASTM B869 : Specification for Copper Clad Steel Electrical Conductor for CATV Drop Wire

ASTM B870 : Specification for Copper Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500and C17510)

ASTM B871 : Test Method for Tear Testing of Aluminum Alloy Products

ASTM B872 : Specification for Precipitation Hardening Nickel Iron Chromium Columbium (Nb) TitaniumAluminum Alloy (UNS N09908) Plate, Sheet, and Strip

ASTM B873 : Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

ASTM B87-32 : Specification for Hard-Drawn Copper Transmission Cable (Withdrawn 1937)

ASTM B874 : Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

ASTM B875 : Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

ASTM B876-96 : Specification for Borated Dispersion Strengthened Copper Plate, Sheet, Strip, and Rolled Bar for Nuclear Application (Withdrawn 2002)

ASTM B877 : Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by thePhosphomolybdic Acid (PMA) Method

ASTM B878 : Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors

ASTM B879 : Practice for Applying Non Electrolytic Conversion Coatings on Magnesium and MagnesiumAlloys

ASTM B88 : Specification for Seamless Copper Water Tube

ASTM B880 : Specification for General Requirements for Chemical Check Analysis Limits for Nickel, NickelAlloys, and Cobalt Alloys

ASTM B881 : Terminology Relating to Aluminum and Magnesium Alloy Products

ASTM B882 : Specification for Pre Patinated Copper for Architectural Applications

ASTM B883 : Specification for Metal Injection Molding (MIM) Ferrous Materials

ASTM B884 : Specification for Niobium Titanium Alloy Billets, Bar, and Rod for SuperconductingApplications

ASTM B885 : Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts

ASTM B887 : Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

ASTM B888 : Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or SpringContacts

ASTM B889 : Specification for Solid Hard Drawn Aluminum Wire for Electrical Purposes (Withdrawn 2003) No Replacement

ASTM B889-98 : Specification for Solid Hard-Drawn Aluminum Wire for Electrical Purposes (Withdrawn 2003)

ASTM B88M : Specification for Seamless Copper Water Tube [Metric]

ASTM B890 : Test Method for Determination of Metallic Constituents of Tungsten Alloys and TungstenHardmetals by X Ray Fluorescence Spectrometry

ASTM B891 : Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and HeatExchanger Tubes With Integral Fins

ASTM B892 : Specification for ACuZinc5 (Zinc Copper Aluminum) Alloy in Ingot Form for Die Castings

ASTM B893 : Specification for Hard Coat Anodizing of Magnesium for Engineering Applications

ASTM B894 : Specification for ACuZinc5 (Zinc Copper Aluminum) Alloy Die Castings

ASTM B89-44 : Specification for Aluminum and Aluminum-Alloy Bars, Rods, and Wire (Withdrawn 1945)

ASTM B895 : Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M)

ASTM B896 : Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

ASTM B898 : Specification for Reactive and Refractory Metal Clad Plate

ASTM B9 : Specification for Bronze Trolley Wire

ASTM B90/B90M : Specification for Magnesium Alloy Sheet and Plate

ASTM B900 : Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. GovernmentAgencies

ASTM B901 : Specification for Compressed Round Stranded Aluminum Conductors Using Single Input WireConstruction

ASTM B902 : Specification for Compressed Round Stranded Copper Conductors, Hard, Medium Hard, orSoft Using Single Input Wire Construction

ASTM B903 : Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

ASTM B904 : Specification for Autocatalytic Nickel over Autocatalytic Copper for ElectromagneticInterference Shielding

ASTM B905 : Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by theMechanized Tape Test

ASTM B906 : Specification for General Requirements for Flat Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

ASTM B907 : Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

ASTM B908 : Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

ASTM B909 : Guide for Plane Strain Fracture Toughness Testing of Non Stress Relieved AluminumProducts

ASTM B90M-90 : Specification for Magnesium-Alloy Sheet and Plate (Metric) (Withdrawn 1993)

ASTM B91 : Specification for Magnesium Alloy Forgings

ASTM B910/B910M : Specification for Annealed Copper Clad Steel Wire

ASTM B911/B911M : Specification for ACSR Twisted Pair Conductor (ACSR/TP)

ASTM B912 : Specification for Passivation of Stainless Steels Using Electropolishing

ASTM B913 : Test Method for Evaluation of Crimped Electrical Connections to 16 Gauge and SmallerDiameter Stranded and Solid Conductors

ASTM B914 : Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot Dip Galvanizing of Steel

ASTM B915 : Test Method for Measuring the Static Heat Resistance of a Self Cleaning Oven Coating

ASTM B916 : Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

ASTM B917/B917M : Practice for Heat Treatment of Aluminum Alloy Castings from All Processes

ASTM B918 : Practice for Heat Treatment of Wrought Aluminum Alloys

ASTM B919 : Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

ASTM B92/B92M : Specification for Unalloyed Magnesium Ingot and Stick For Remelting

ASTM B920 : Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors ofSodium Hypochlorite Solution

ASTM B921 : Specification for Non hexavalent Chromium Conversion Coatings on Aluminum andAluminum Alloys

ASTM B923 : Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

ASTM B924 : Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger TubesWith Integral Fins

ASTM B925 : Practices for Production and Preparation of Powder Metallurgy (P/M) Test Specimens

ASTM B926 : Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of aLight Table

ASTM B927 : Specification for Brass Rod, Bar, and Shapes

ASTM B928/B928M : Specification for High Magnesium Aluminum Alloy Sheet and Plate for Marine Service

ASTM B929 : Specification for Copper Nickel Tin Spinodal Alloy Rod and Bar

ASTM B92M-83 : Specification for Magnesium Ingot and Stick for Remelting (Metric) (Withdrawn 1988)

ASTM B93/B93M : Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent MoldCastings, and Die Castings

ASTM B930 : Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in CementedTungsten Carbides (Hardmetals)

ASTM B931 : Test Method for Metallographically Estimating the Observed Case Depth of Ferrous PowderMetallurgy (P/M) Parts

ASTM B932 : Specification for Low Carbon Nickel Chromium Molybdenum Gadolinium Alloy Plate, Sheet, and Strip

ASTM B933 : Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials

ASTM B934 : Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts UsingMicroindentation Hardness Measurements

ASTM B935 : Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials

ASTM B936 : Specification for Copper Chrome Iron Titanium Alloy Plate, Sheet, Strip and Rolled Bar

ASTM B937 : Specification for Copper Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

ASTM B938 : Specification for Copper Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 andC17510)

ASTM B939 : Test Method for Radial Crushing Strength, K, of Powder Metallurgy (P/M) Bearings andStructural Materials

ASTM B93M-88 : Specification for Magnesium Alloys Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings (Metric) (Withdrawn 1990)

ASTM B94 : Specification for Magnesium Alloy Die Castings

ASTM B940 : Practice for Testing Non Chromate Coatings on Zinc and Cadmium Surfaces

ASTM B941 : Specification for Heat Resistant Aluminum Zirconium Alloy Wire for Electrical Purposes

ASTM B942 : Guide for Specification and Quality Assurance for the Electrical Contact Performance ofCrimped Wire Terminations

ASTM B943 : Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

ASTM B944 : Specification for Copper Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

ASTM B945 : Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature ShapingProcess for Production of T1, T2, T5 and T10 Type Tempers

ASTM B947 : Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate

ASTM B95-39 : Method of Linear Expansion of Metals (Withdrawn 1984)

ASTM B958 : Specification for Extra-High-Strength and Ultra-High-Strength Class AZinc/5% Aluminum-

ASTM B96/B96M : Specification for Copper Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposesand Pressure Vessels

ASTM B96M-93a : Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels [Metric] (Withdrawn 1999)

ASTM B97-81 : Specification for Copper-Silicon Alloy Plate, Sheet Strip and Rolled Bar for General Purposes (Withdrawn 1981)

ASTM B98/B98M : Specification for Copper Silicon Alloy Rod, Bar and Shapes

ASTM B98M-93 : Specification for Copper-Silicon Alloy Rod, Bar, and Shapes [Metric] (Withdrawn 1998)

ASTM B99/B99M : Specification for Copper Silicon Alloy Wire for General Applications

ASTM B99M-94 : Specification for Copper-Silicon Alloy Wire for General Applications [Metric] (Withdrawn 1996)

위 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집 규격번호와 제목을 발췌, 열거한 것입니다.[출처 : www.astm.org ]