You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM P XXXX

ASTM P XXXX

  • ASTM P101 : Method of Measuring EnergyConserving Quality of Engine Oils in Vehicles (Withdrawn 1988)

  • ASTM P102 : Classification of EnergyConserving Engine Oils (Withdrawn 1988)

  • ASTM P104 : Specification for Gasahol (Withdrawn 1988)

  • ASTM P105 : Method for Laboratory Measurement of Sound Reflection from Vertical Surfaces for Use in OpenPlan Spaces (Withdrawn 1987)

  • ASTM P106 : Test Method for Apparent Viscosity of Engine Oils Between 30 Degrees C and 5 Degrees C Using the Cold Cranking Simulator (Withdrawn 1988)

  • ASTM P107 : (Withdrawn 1986)

  • ASTM P108 : Test Method for Determining the Fire Performance of Public Ground Transportation Seat Assemblies (Withdrawn 1987)

  • ASTM P110 : Proposed Guide to Assist in the Defining, Procuring, Installing, and Implementing of a Computerized Hospital Pharmacy System (Withdrawn 1988)

  • ASTM P111 : Test Method for Determination of Pseudomonas Aeruginosa in Water by Membrane Filtration (Withdrawn 1988)

  • ASTM P112 : Test Method for Interstitial Oxygen Content of Silicon Slices by ComputerAssisted Infrared Spectrophotometry (Withdrawn 1987)

  • ASTM P113 : Test Method for Test Method Thallium in Water by Voltammetry (Withdrawn 1985)

  • ASTM P114 : Test Method for Copper in Water by Voltammetry (Withdrawn 1985)

  • ASTM P116 : Test Method for Cyclohexylamine, Morpholine, and Diethyl Aminoethanol in Water and Condensed Steam, by Direct Aqueous Injection Gas Chromatography (Withdrawn 1986)

  • ASTM P117 : Test Method for Nickel and Vanadium in Waterborne Oils (Withdrawn 1985)

  • ASTM P119 : Test Method for Tarnish Resistance of Electrical Contacts to Flowers of Sulfur Atmospheres (Withdrawn 1984)

  • ASTM P121 : Method for Optical Emission Spectrometric Analysis of Refined Copper, by the Briquette DC Arc Technique (Withdrawn 1984)

  • ASTM P122 : Test Method for Test Method for Moisture and Noncombustibles of RDF3 Macrosamples (Withdrawn 1985)

  • ASTM P123 : Test Method for Total Moisture (Single Stage) in RDF3 Samples (Withdrawn 1985)

  • ASTM P124 : Specification for Specification for Pine Oil Disinfectant (Withdrawn 1984)

  • ASTM P125 : Test Method for Static and Dynamic Coefficient of Friction of PolishCoated Floor Surfaces, as Measured by the Horizontal Slip Tester (Withdrawn 1987)

  • ASTM P126 : Test Method for Static Coefficient of Friction of PolishCoated Floor Surfaces, as Measured by the NBSBrungrabber Articulated Arm Tester (Withdrawn 1987)

  • ASTM P127 : Test Method for Dynamic Coefficient of Friction of PolishCoated Floor Surfaces, as Measured by the NBSSigler Pendulum Impact Tester (Withdrawn 1987)

  • ASTM P128 : Test Method for Static and Dynamic Coefficient of Friction of PolishCoated Floor Surfaces, as Measured by the Topaka Slip Tester (Withdrawn 1987)

  • ASTM P129 : Specification for Concrete Cleaner, FlushOff Type (Withdrawn 1984)

  • ASTM P130 : Practice for Selection of Release Torque Value for Ski Bindings (Withdrawn 1986)

  • ASTM P131 : Method for Selection of Release Torque Values of Ski Bindings (Withdrawn 1987)

  • ASTM P139 : Method for Chemical Analysis of MagnesiumAnalysis for Manganese and Zinc, by Direct Current Plasma Spectroscopy (Withdrawn 1985)

  • ASTM P140 : Method of Testing Flat Disposable (Consumable) Hot Top Boards and Risers for Metallic Ingots and Castings (C8 Proposal) (Withdrawn 1985)

  • ASTM P141 : Test Method for Organic Halides in Water by CarbonAbsorptionMicrocoulometric Detection (D19 Proposal) (Withdrawn 1983)

  • ASTM P142 : Proposed Practice for Calculating Heat Losses Through Furnace Walls (C8 Proposal) (Withdrawn 1986)

  • ASTM P143 : Methods of Testing Exothermic Refractory Covering Powders for Metallic Ingots and Castings (C8 Proposal) (Withdrawn 1985)

  • ASTM P144 : Method for Eye Irritation in Albino Rabbits (E35 Proposal) (Withdrawn 1986)

  • ASTM P145 : Practice for Detection and Evaluation of Discontinuities, by the Immersed PulseEcho Ultrasonic Method Using Longitudinal Waves (E7 Proposal) (Withdrawn 1986)

  • ASTM P147 : Method for Room Fire Test of Wall and Ceiling Materials and Assemblies (E5 Proposal) (Withdrawn 1986)

  • ASTM P148 : Test Method for Fluorides in Workplace Atmospheres (D22 Proposal) (Withdrawn 1987)

  • ASTM P149 : Test Method for Phosphate Esters in Water (D19 Proposal) (Withdrawn 1986)

  • ASTM P152 : Operational Guide for Direct Current Plasma Emission Spectrometer Analysis (Withdrawn 1987)

  • ASTM P156 : Guide for Shredder Explosion Protection (E38 Proposal) (Withdrawn 1989)

  • ASTM P159 : Method for Rheological Measurements of Bitumens by Vacuum Capillary Viscometer (D4 Proposal) (Withdrawn 1986)

  • ASTM P160 : Test Method for Viscosity of Asphalt Emulsion Residues and NonNewtonian Bitumens by Vacuum Capillary Viscometer (D4 Proposal) (Withdrawn 1986)

  • ASTM P161 : Test Method for Benzidene and 3,3 Bichlorobenzidene in Water by High Performance Liquid Chromatography (D19 Proposal) (Withdrawn 1986)

  • ASTM P162 : Method of Quantification for Petroleum Oil in Water (D19 Proposal) (Withdrawn 1986)

  • ASTM P163 : Test Method for Hydrocarbons in Tissue Samples (D19 Proposal) (Withdrawn 1986)

  • ASTM P164 : Test Method for Simultaneous Detection and Enumeration of Total and Respiring Bacteria in Aquatic Systems Using Acridine Orange InFormazan Reduction Technique (D19 Proposal) (Withdrawn 1985)

  • ASTM P165 : Test Method for Enumeration of Aquatic Bacteria by the Use of Acridine Orange Epifluorescence Direct Microscopic Counting (D19 Proposal) (Withdrawn 1985)

  • ASTM P166 : Proposed Practice for Sampling and Inspection of Complete Alpine Boot Binding Systems in Rental Applications (F27 Proposal) (Withdrawn 1987)

  • ASTM P167 : Test Method for Boiling Range Distribution of Crude Petroleum by Gas Chromatography (D2 Proposal) (Withdrawn 1987)

  • ASTM P168 : Guide for Estimating the Incompatability of Selected Hazardous Wastes Based on Binary Chemical Raeactions (Withdrawn 1988)

  • ASTM P169 : Test Method for Determining a Correction Factor for the Bitumen Retained by Aggregate Folowing a Bitumen Extraction Test (Withdrawn 1989)

  • ASTM P170 : Specification for Denatured Fuel Ethanol to be Blended With Gasolines for Use as an Automotive SparkIgnition Engine Fuel (Withdrawn 1988)

  • ASTM P171 : Guide for Preparation of Biological Samples for Inorganic Chemical Analysis (Withdrawn 1988)

  • ASTM P172 : Specification for Electronic Grade Water (Withdrawn 1989)

  • ASTM P173 : Method for Comparison of Waterborne Petroleum Oils by Silhoutte Profile Fluorescence Spectroscopy (Withdrawn 1988)

  • ASTM P174 : Test Method for NitriteNitrate in Water (Withdrawn 1988)

  • ASTM P176 : Specification for Automotive SparkIgnition Engine Fuel (Withdrawn 1988)

  • ASTM P178 : Proposed Test Method for Measurement of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature (Withdrawn 1988)

  • ASTM P179 : Method for Comparison of Waterborne Petroleum Oils by Low Temperature Luminescence (Withdrawn 1988)

  • ASTM P180 : Test Method for Heating Performance and Emissions of Residential WoodFired Closed CombustionChamber Heating Appliances (Withdrawn 1988)

  • ASTM P181 : Test Method for Chlorine in Workplace Atmospheres (Withdrawn 1988)

  • ASTM P182 : Method for Determination of Benzene Soluble Particulate Matter in Workplace Atmospheres (Withdrawn 1988)

  • ASTM P183 : Test Method for Determination of 2,4Toluene Diisocyanate (2,4TDI) in Workplace Atmospheres (Withdrawn 1988)

  • ASTM P184 : Method for Chemical Analysis of Ferrosilicon and Silicon Metal (Withdrawn 1988)

  • ASTM P185 : Test Method for Determination of the Ignition Resistance of Stacking Chairs (Withdrawn 1988)

  • ASTM P186 : Method for Random Vibration Testing of Shipping Containers (Withdrawn 1989)

  • ASTM P187 : Method for Determination of Oxygen in Steel and Iron, Nickel, and Cobalt Alloys (Withdrawn 1988)

  • ASTM P188 : Method of Test for Short Rod Fracture Toughness of Cemented Carbides (Withdrawn 1988)

  • ASTM P189 : Specification for Encapsulants for Friable AsbestosContaining Building Materials (Withdrawn 1988)

  • ASTM P190 : Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Withdrawn 1988)

  • ASTM P191 : Test Method for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies (Withdrawn 1988)

  • ASTM P192 : Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 1988)

  • ASTM P193 : Specification for Ski Binding Test Devices (Withdrawn 1988)

  • ASTM P194 : Method of Verification of Ski Binding Test Devices (Withdrawn 1988)

  • ASTM P195 : Test Method for Chemical Analysis of CopperBismuty, Antimony, Arsenic, Tellurium, Lead, Iron and Selenium by Lanthanum Colletion and Direct Current Argon Plasma Optical Emission Spectroscopy (Withdrawn 1989)

  • ASTM P196 : Test Method for Distillation of Heavy Oils and Crudes (Withdrawn 1989)

  • ASTM P197 : Test Method for Interstitial Oxygen Content of Silicon Slices Polished on Both Sides by ComputerAssisted Infrared Spectrophotometry (Withdrawn 1988)

  • ASTM P198 : Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (Withdrawn 1989)

  • ASTM P200 : Method for Compression Testing of Cemented Carbides (Withdrawn 1990)

  • ASTM P201 : Test Method for Light Scattering Determination of Particle Size of Sediments in Aqueous Suspension (Withdrawn 1990)

  • ASTM P202 : Test Method for Iodide in Water (Withdrawn 1990)

  • ASTM P203 : Methods for Determination of Selenium in Refined Copper by Direct Current Argon Plasma Spectroscopy (Withdrawn 1990)

  • ASTM P204 : Methods for Determination of Iron, Lead, Nickel, Silver, and Tin in Refined Copper by Direct Current Argon Plasma Optical Emission Spectroscopy (Withdrawn 1990)

  • ASTM P205 : Classification for Energy Conserving Engine Oils (Withdrawn 1990)

  • ASTM P206 : Method for Determination of Tungsten in Ferrotungsten by the Cinchonine Gravimetric Method (Withdrawn 1989)

  • ASTM P207 : Guidelines for Precision and Bias Statements in Test Method Standards (Withdrawn 1989)

  • ASTM P208 : Test Method for the Workplace Sampling and Analysis of Welding Fumes for Chromium (Withdrawn 1989)

  • ASTM P209 : Test Method for Sampling and Analysis of Nitrogen Dioxide Content of the Atmosphere (Withdrawn 1989)

  • ASTM P210 : Withdrawn 1991

  • ASTM P211 : Terminology Relating to Biomass Fuels (Withdrawn 1990)

  • ASTM P212 : Test Method for Sequence VE Test Procedure (Withdrawn 1992)

  • ASTM P213 : Test Method for Photoluminescence Analysis of Single Crystal Silicon for IIIV Impurities (Withdrawn 1991)

  • ASTM P215 : Test Method for Polychlorinated Biphenyls (PBC’s) in Water by Gas Chromatography/Mass Spectrometry (Withdrawn 1993)

  • ASTM P216 : Test Method for Formaldehyde in Water (Withdrawn 1993)

  • ASTM P217 : Test Method for Total Tetra Through Octachloro DibenzoPDioxins and Dibenzofurans in Water (Withdrawn 1993)

  • ASTM P218 : Test Method for Determination of SemiVolatile Organic Compounds in Water by GC/MS (Withdrawn 1993)

  • ASTM P219 : Test Method for 2, 3, 7, 8TetrachlorodibenzoPDioxin (TCDD) and 2,3,7,8Tetrachlorodibenzofurans (TCDF) in Water (Withdrawn 1993)

  • ASTM P220 : Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBR Derivatization Method) (Withdrawn 1992)

  • ASTM P221 : Practice for Requirements for Colored Rigid Poly(Vinylchloride) (PVC) ExteriorProfile Extrusions Used for Assembled Windows and Doors (Withdrawn 1993)

  • ASTM P222 : Test Method for Sulfur Dioxide in Workplace Atmospheres (Withdrawn 1993)

  • ASTM P223 : Method for Requirements for Colored Rigid Poly(Vinylchloride) (PVC) Siding (Withdrawn 1993)

  • ASTM P224 : Test Method for Determining the Net Carrier Density on Bulk and Epitaxial Silicon Wafers by Using a Mercury Probe (Withdrawn 1992)

  • ASTM P225 : Oriented Poly(Vinyl Chloride) (Withdrawn 1992)

  • ASTM P226 : Test Methods for Bituminous Materials in Tension (Withdrawn 1993)

  • ASTM P227 : Practice for Evaluation Criteria of Hydraulic Cement Testing Laboratories (Withdrawn 1993)

  • ASTM P228 : Test Methods for PH Measurement of Water of Low Conductivity (Withdrawn 1994)

  • ASTM P229 : Test Method for Giardia Cysts and Cryptosporidium Oocysts in Low Turbidity Water by a Fluorescent Antibody Procedure (Withdrawn 1995)

  • ASTM P230 : Test Method for Measurement of Occupational Exposure to Formaldehyde (Passive Sampler Methodology) (Withdrawn 1994)

  • ASTM P231 : Test Method for NMethylcarbamoyloximes and NMethylcarbamates in Water by Direct Aqueous Injection HPLC With Post Column Derivatization (Withdrawn 1993)

  • ASTM P232 : Specification for Fuel Methanol (M85) for Automotive SparkIgnition Engines (Withdrawn 1995)

  • ASTM P233 : Withdrawn 1995

  • ASTM P235 : Proposed Test Method for Fluorometric Determination of ToxicityInduced Enzymatic Inhibition in Daphnia Magna (Withdrawn 1995)

  • ASTM P236 : Method of Testing for AsbestosContaining Materials by Polarized Light Microscopy (Withdrawn 1995)

  • ASTM P242 : Test Method for Adherent Fines Test (Withdrawn 1995)

  • ASTM P243 : Test Method for Toughness and Tenacity of Bituminous Materials (Withdrawn 1995)

  • ASTM P244 : Withdrawn 1995

    • 위 ASTM (American Society for Testing and Materials) 규격 목록은 ASTM 규격집 규격번호와 제목을 발췌, 열거한 것입니다.[출처 : www.astm.org ]

    Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    November 2024
    M T W T F S S
    « Aug    
     123
    45678910
    11121314151617
    18192021222324
    252627282930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.