You are here: [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | » ASTM D XXXX(B)

ASTM D XXXX(B)

  • ASTM D5001-03 : Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

  • ASTM D5002 : Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

  • ASTM D5002-99 : Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

  • ASTM D5003 : Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke

  • ASTM D5003-95R00E01 : Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke

  • ASTM D5004 : Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

  • ASTM D5004-89R04E01 : Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

  • ASTM D5005-89 : Test Method for Evaluation of Fluids for Effects on Friction and Wear of Wet Clutches (Withdrawn 1995)

  • ASTM D5006-03 : Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

  • ASTM D5007 : Test Method for Wet to Dry Hiding Change

  • ASTM D5007-99R03 : Test Method for Wet-to-Dry Hiding Change

  • ASTM D5008 : Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2 Ethylhexanol By GasChromatography

  • ASTM D5008-01 : Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

  • ASTM D5009 : Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied CoatingsUnder Laboratory Conditions

  • ASTM D5009-02R05 : Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions

  • ASTM D501 : Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

  • ASTM D5010 : Guide for Testing Printing Inks and Related Materials

  • ASTM D5010-05 : Guide for Testing Printing Inks and Related Materials

  • ASTM D5011 : Practices for Calibration of Ozone Monitors Using Transfer Standards

  • ASTM D5011-92R03 : Practices for Calibration of Ozone Monitors Using Transfer Standards

  • ASTM D5012 : Guide for Preparation of Materials Used for the Collection and Preservation of AtmosphericWet Deposition

  • ASTM D5012-01 : Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition

  • ASTM D5013 : Practices for Sampling Wastes from Pipes and Other Point Discharges

  • ASTM D5013-89R03 : Practices for Sampling Wastes from Pipes and Other Point Discharges

  • ASTM D5014 : Test Method for Measurement of Formaldehyde in Indoor Air (Passive SamplerMethodology) (Withdrawn 2006) No Replacement

  • ASTM D5014-94R00E01 : Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology)

  • ASTM D5015 : Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination

  • ASTM D5015-02 : Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination

  • ASTM D5016 : Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion UsingHigh Temperature Tube Furnace Combustion Method with Infrared Absorption

  • ASTM D5016-03 : Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption

  • ASTM D5017 : Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition byCarbon 13 Nuclear Magnetic Resonance

  • ASTM D5017-96R03E01 : Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

  • ASTM D5018 : Test Method for Shear Viscosity of Coal Tar and Petroleum Pitches

  • ASTM D5018-89R04 : Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

  • ASTM D501-89(1998) : Test Methods of Sampling and Chemical Analysis of Alkaline Detergents (Withdrawn 2001)

  • ASTM D5019 : Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single PlyRoof Membrane

  • ASTM D5019-96E01 : Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane

  • ASTM D502 : Test Method for Particle Size of Soaps and Other Detergents

  • ASTM D5020-89 : Test Method for Chlorofluorocarbon Activity of Activated Carbon (Withdrawn 1994)

  • ASTM D5021 : Specification for Thermoplastic Elastomer Chlorinated Ethylene Alloy (TECEA)

  • ASTM D5021-00 : Specification for Thermoplastic Elastomer\NChlorinated Ethylene Alloy (TECEA)

  • ASTM D5022-95R01 : Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use

  • ASTM D5023 : Test Method for Measuring the Dynamic Mechanical Properties : In Flexure (Three PointBending)

  • ASTM D5023-01 : Test Method for Plastics : Dynamic Mechanical Properties : In Flexure (Three-Point Bending)

  • ASTM D5024 : Test Method for Plastics : Dynamic Mechanical Properties : In Compression

  • ASTM D5024-01 : Test Method for Plastics : Dynamic Mechanical Properties : In Compression

  • ASTM D5024-95a : Test Method for Plastics : Dynamic Mechanical Properties : In Compression

  • ASTM D5025 : Specification for Laboratory Burner Used for Small Scale Burning Tests on Plastic Materials

  • ASTM D5025-99 : Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

  • ASTM D5026 : Test Method for Plastics : Dynamic Mechanical Properties : In Tension

  • ASTM D5026-01 : Test Method for Plastics : Dynamic Mechanical Properties : In Tension

  • ASTM D5028 : Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

  • ASTM D5028-96R03 : Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

  • ASTM D5029 : Test Method for Water Solubles in Activated Carbon

  • ASTM D5029-98R04 : Test Method for Water Solubles in Activated Carbon

  • ASTM D5030 : Test Method for Density of Soil and Rock in Place by the Water Replacement Method in aTest Pit

  • ASTM D5030-04 : Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

  • ASTM D5030-89(1994)e1 : Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit (Withdrawn 2003)

  • ASTM D5031 : Practice for Enclosed Carbon Arc Exposure Tests of Paint and Related Coatings

  • ASTM D5031-01 : Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

  • ASTM D5032-97R03 : Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions

  • ASTM D5033 : Guide for Development of ASTM Standards Relating to Recycling and Use of RecycledPlastics

  • ASTM D5033-00 : Guide for Development of Standards Relating to Recycling and Use of Recycled Plastics

  • ASTM D5034 : Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

  • ASTM D503-48 : Specification for Bleaced Wide Cotton Sheeting (Withdrawn 1949)

  • ASTM D5034-95R01 : Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

  • ASTM D5035 : Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

  • ASTM D5035-95R03 : Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)

  • ASTM D5036 : Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing

  • ASTM D5036-99 : Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing

  • ASTM D5037 : Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography

  • ASTM D5037-90(1996)e1 : Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography (Withdrawn 2002)

  • ASTM D5038 : Terminology of Textile Conservation

  • ASTM D5038-01 : Terminology of Textile Conservation

  • ASTM D5039 : Test Methods for Identification of Wire Side of Paper

  • ASTM D5039-97R02 : Test Methods for Identification of Wire Side of Paper

  • ASTM D5040 : Test Methods for Ash Content of Adhesives

  • ASTM D5040-90R97E01 : Test Methods for Ash Content of Adhesives

  • ASTM D5041 : Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

  • ASTM D5041-98R04 : Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

  • ASTM D5042 : Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins

  • ASTM D5042-90R04E01 : Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins

  • ASTM D5043 : Practice for Field Identification of Coatings

  • ASTM D5043-04 : Practice for Field Identification of Coatings

  • ASTM D5043-90 : Test Methods for Field Indentification of Coatings (Withdrawn 1997)

  • ASTM D5044 : Test Method for Rubber Chemicals Free 2 Mercaptobenzothiazole (MBT) in BenzothiazylDisulfide (MBTS)

  • ASTM D5044-02 : Test Method for Rubber Chemicals\MFree 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

  • ASTM D504-41 : Specification for Single-Ply Bleaced Cotton Broadcloth (Withdrawn 1950)

  • ASTM D5045 : Test Methods for Plane Strain Fracture Toughness and Strain Energy Release Rate of PlasticMaterials

  • ASTM D5045-99 : Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

  • ASTM D5046-98 : Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000)

  • ASTM D5047 : Specification for Polyethylene Terephthalate Film and Sheeting

  • ASTM D5047-95R03 : Specification for Polyethylene Terephthalate Film and Sheeting

  • ASTM D5048 : Test Method for Measuring the Comparative Burning Characteristics and Resistance to BurnThrough of Solid Plastics Using 125 mm Flame

  • ASTM D5048-03 : Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

  • ASTM D5049-90 : Test Method for the Screening of Cyanides in Waste (Withdrawn 1999)

  • ASTM D505- : Specification for Terry (Turkish) Toweling (Withdrawn 1950)

  • ASTM D5050 : Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

  • ASTM D5050-96R02 : Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

  • ASTM D5051 : Test Method for Rubber Chemicals Benzothiazyl Disulfide (MBTS) Assay

  • ASTM D5051-02 : Test Method for Rubber Chemicals\MBenzothiazyl Disulfide (MBTS)\MAssay

  • ASTM D5052 : Test Method for Permeability of Leather to Water Vapor

  • ASTM D5052-00R05 : Test Method for Permeability of Leather to Water Vapor

  • ASTM D5053 : Test Method for Colorfastness of Crocking of Leather

  • ASTM D5053-03E01 : Test Method for Colorfastness of Crocking of Leather

  • ASTM D5054 : Test Method for Rubber Chemicals Diphenyl Guanidine (DPG) and Di o tolyl guanidine(DOTG) Assay

  • ASTM D5054-90R04E01 : Test Method for Rubber Chemicals\MDiphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

  • ASTM D5055 : Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood IJoists

  • ASTM D5055-04 : Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

  • ASTM D5056 : Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

  • ASTM D5056-04 : Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

  • ASTM D5057-90R01 : Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste

  • ASTM D5058-90R01 : Test Methods for Compatibility of Screening Analysis of Waste

  • ASTM D5059 : Test Methods for Lead in Gasoline by X Ray Spectroscopy

  • ASTM D5059-98R03E01 : Test Methods for Lead in Gasoline by X-Ray Spectroscopy

  • ASTM D5060 : Test Method for Determining Impurities in High Purity Ethylbenzene by Gas Chromatography

  • ASTM D5060-95R00E01 : Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

  • ASTM D5061 : Test Method for Microscopical Determination of the Textural Components of MetallurgicalCoke

  • ASTM D5061-05 : Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke

  • ASTM D5062 : Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

  • ASTM D5062-96R01 : Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

  • ASTM D5063 : Guide for Use of Certification of Coating Conformance Form

  • ASTM D5063-90R04 : Guide for Use of Certification of Coating Conformance Form

  • ASTM D5064 : Practice for Conducting a Patch Test to Assess Coating Compatibility

  • ASTM D5064-01 : Practice for Conducting a Patch Test to Assess Coating Compatibility

  • ASTM D5065 : Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

  • ASTM D506-50 : Method of Test for Colorfastness to Light Textiles (Withdrawn 1957)

  • ASTM D5065-01 : Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

  • ASTM D5066 : Test Method for Determination of the Transfer Efficiency Under Production Conditions forSpray Application of Automotive Paints Weight Basis

  • ASTM D5066-91R05 : Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints\MWeight Basis

  • ASTM D5067 : Specification for Artists’ Watercolor Paints

  • ASTM D5067-05 : Specification for Artists’ Watercolor Paints

  • ASTM D5068 : Practice for Preparation of Paint Brushes for Evaluation

  • ASTM D5068-04 : Practice for Preparation of Paint Brushes for Evaluation

  • ASTM D5069 : Practice for Preparation of Paint Roller Covers for Evaluation

  • ASTM D5069-92R02E01 : Practice for Preparation of Paint-Roller Covers for Evaluation

  • ASTM D507- : General Methods of Testing and Tolerances for Spun Rayon Yarns and Threads (Withdrawn 1954)

  • ASTM D5070 : Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners byPotentiometric Titrations

  • ASTM D5070-90R05 : Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations

  • ASTM D5071 : Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

  • ASTM D5071-99 : Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

  • ASTM D5072 : Test Method for Radon in Drinking Water

  • ASTM D5072-98 : Test Method for Radon in Drinking Water

  • ASTM D5073 : Practice for Depth Measurement of Surface Water

  • ASTM D5073-02 : Practice for Depth Measurement of Surface Water

  • ASTM D5074 : Practice for Preparation of Natural Matrix Sediment Reference Samples for Major and TraceInorganic Constituents Analysis by Partial Extraction Procedures

  • ASTM D5074-90R03 : Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures

  • ASTM D5075 : Test Method for Nicotine and 3 Ethenylpyridine in Indoor Air

  • ASTM D5075-01 : Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air

  • ASTM D5076 : Test Method for Measuring Voids in Roofing and Waterproofing Membranes

  • ASTM D5076-90R00E01 : Test Method for Measuring Voids in Roofing and Waterproofing Membranes

  • ASTM D5077 : Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials

  • ASTM D5077-90R03 : Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials

  • ASTM D5078 : Specification for Crack Filler, Hot Applied, for Asphalt Concrete and Portland CementConcrete Pavements

  • ASTM D5078-95R00 : Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

  • ASTM D5079 : Practices for Preserving and Transporting Rock Core Samples

  • ASTM D5079-02 : Practices for Preserving and Transporting Rock Core Samples

  • ASTM D5080 : Test Method for Rapid Determination of Percent Compaction

  • ASTM D5080-00 : Test Method for Rapid Determination of Percent Compaction

  • ASTM D5081 : Test Method for Aggregate Layer Hiding Power

  • ASTM D5081-90R99E01 : Test Method for Aggregate Layer Hiding Power

  • ASTM D5082 : Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing

  • ASTM D5082-99 : Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing

  • ASTM D5083 : Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight SidedSpecimens

  • ASTM D5083-02 : Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

  • ASTM D5084 : Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous MaterialsUsing a Flexible Wall Permeameter

  • ASTM D5084-03 : Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

  • ASTM D508-43 : Methods of Testing and Tolerances for Yarns Spun from Wool Mixed with Fibers Other than Wool (Withdrawn 1954)

  • ASTM D5085 : Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric WetDeposition by Chemically Suppressed Ion Chromatography

  • ASTM D5085-02 : Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography

  • ASTM D5086 : Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium inAtmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry

  • ASTM D5086-01 : Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry

  • ASTM D5087 : Test Method for Determining Amount of Volatile Organic Compound (VOC) Released fromSolventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

  • ASTM D5087-02 : Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

  • ASTM D5088 : Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites

  • ASTM D5088-02 : Practices for Decontamination of Field Equipment Used at Waste Sites

  • ASTM D5089 : Test Method for Velocity Measurements of Water in Open Channels with ElectromagneticCurrent Meters

  • ASTM D5089-95R03 : Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters

  • ASTM D509 : Test Methods of Sampling and Grading Rosin

  • ASTM D5090-90R01 : Practice for Standardizing Ultrafiltration Permeate Flow Performance Data

  • ASTM D5091 : Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications

  • ASTM D5091-95R01 : Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications

  • ASTM D5092 : Practice for Design and Installation of Ground Water Monitoring Wells

  • ASTM D5092-04E01 : Practice for Design and Installation of Ground Water Monitoring Wells

  • ASTM D5093 : Test Method for Field Measurement of Infiltration Rate Using a Double Ring Infiltrometerwith a Sealed Inner Ring

  • ASTM D5093-02 : Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring

  • ASTM D5094 : Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug StyleClosures

  • ASTM D5094-04 : Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures

  • ASTM D5095 : Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and SilaneSiloxane Blends Used in Masonry Water Repellent Treatments

  • ASTM D5095-91R02 : Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

  • ASTM D5096 : Test Method for Determining the Performance of a Cup Anemometer or PropellerAnemometer

  • ASTM D5096-02 : Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer

  • ASTM D5097 : Test Method for Filter-Retained Solids Content of Polymer Latexes

  • ASTM D5097-90(1996) : Test Method for Filter-Retained Solids Content of Polymer Latexes (Withdrawn 2004)

  • ASTM D5098 : Specification for Artists’ Acrylic Dispersion Paints

  • ASTM D5098-05A : Specification for Artists’ Acrylic Dispersion Paints

  • ASTM D5099 : Test Methods for Rubber Measurement of Processing Properties Using Capillary Rheometry

  • ASTM D5099-93R03 : Test Methods for Rubber\MMeasurement of Processing Properties Using Capillary Rheometry

  • ASTM D5100 : Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

  • ASTM D5100-95AR04 : Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

  • ASTM D5101-01 : Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio

  • ASTM D5102 : Test Method for Unconfined Compressive Strength of Compacted Soil Lime Mixtures

  • ASTM D5102-04 : Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

  • ASTM D5103 : Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single FiberTest)

  • ASTM D5103-01 : Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)

  • ASTM D5104 : Test Method for Shrinkage of Textile Fibers (Single Fiber Test)

  • ASTM D5104-02 : Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)

  • ASTM D5105 : Practice for Performing Accelerated Outdoor Weathering of Pressure Sensitive Tapes UsingConcentrated Natural Sunlight

  • ASTM D5105-94R99 : Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight

  • ASTM D5106 : Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

  • ASTM D5106-03 : Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

  • ASTM D510-68 : Methods of Sampling Industrial Water (Withdrawn 1974)

  • ASTM D5107 : Practice for Preparatory Surface Cleaning of Architectural Sandstone

  • ASTM D5107-03 : Practice for Preparatory Surface Cleaning of Architectural Sandstone

  • ASTM D5108 : Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

  • ASTM D5108-90R02 : Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

  • ASTM D5109 : Test Methods for Copper Clad Thermosetting Laminates for Printed Wiring Boards

  • ASTM D5109-99R04 : Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards

  • ASTM D5110 : Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry

  • ASTM D5110-98R04 : Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry

  • ASTM D5111 : Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition atNon Urban Locations

  • ASTM D5111-99 : Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations

  • ASTM D5112 : Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products

  • ASTM D5112-98R03 : Test Method for Vibration (Horizontal Linear Motion) Test of Products

  • ASTM D5113 : Test Method for Determining Adhesive Attack on Rigid Cellular Foam

  • ASTM D5113-97 : Test Method for Determining Adhesive Attack on Rigid Cellular Foam

  • ASTM D5114 : Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell

  • ASTM D5114-90R04 : Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell

  • ASTM D5115 : Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF

  • ASTM D5115-90R04 : Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF

  • ASTM D5116 : Guide for Small Scale Environmental Chamber Determinations of Organic Emissions FromIndoor Materials/Products

  • ASTM D5116-97 : Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products (Withdrawn 2006)

  • ASTM D5117-03 : Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

  • ASTM D51-18 : Specification for Raw Linseed Oil (Withdrawn 1926)

  • ASTM D5118/D5118M : Practice for Fabrication of Fiberboard Shipping Boxes

  • ASTM D5118/D5118M-04E01 : Practice for Fabrication of Fiberboard Shipping Boxes

  • ASTM D5119 : Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine

  • ASTM D5119-02 : Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (Withdrawn 2003)

  • ASTM D512 : Test Methods for Chloride Ion In Water

  • ASTM D5120 : Test Method for Inhibition of Respiration in Microbial Cultures in the Activated SludgeProcess

  • ASTM D5120-90R04 : Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process

  • ASTM D5121 : Practice for Preparation of Rock Slabs for Durability Testing

  • ASTM D5121-90R01 : Practice for Preparation of Rock Slabs for Durability Testing

  • ASTM D5124 : Practice for Testing and Use of a Random Number Generator in Lumber and Wood ProductsSimulation

  • ASTM D5124-96R01 : Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation

  • ASTM D5125 : Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

  • ASTM D5125-97R05 : Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

  • ASTM D5126 : Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the VadoseZone

  • ASTM D5126-90R04 : Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

  • ASTM D5127 : Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry

  • ASTM D5127-99 : Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry

  • ASTM D5128 : Test Method for On Line pH Measurement of Water of Low Conductivity

  • ASTM D5128-90R05 : Test Method for On-Line pH Measurement of Water of Low Conductivity

  • ASTM D5129 : Test Method for Open Channel Flow Measurement of Water Indirectly by Using WidthContractions

  • ASTM D5129-95R03 : Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions

  • ASTM D513 : Test Methods for Total and Dissolved Carbon Dioxide in Water

  • ASTM D5130 : Test Method for Open Channel Flow Measurement of Water Indirectly by Slope Area Method

  • ASTM D5130-95R03 : Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method

  • ASTM D5131 : Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems

  • ASTM D5131-90R01 : Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems

  • ASTM D5132 : Test Method for Horizontal Burning Rate of Polymeric Materials Used in OccupantCompartments of Motor Vehicles

  • ASTM D5132-04 : Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

  • ASTM D5133 : Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence ofLubricating Oils Using a Temperature Scanning Technique

  • ASTM D5133-01 : Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

  • ASTM D5134 : Test Method for Detailed Analysis of Petroleum Naphthas through n Nonane by Capillary GasChromatography

  • ASTM D5134-98R03 : Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

  • ASTM D5135 : Test Method for Analysis of Styrene by Capillary Gas Chromatography

  • ASTM D5135-02E01 : Test Method for Analysis of Styrene by Capillary Gas Chromatography

  • ASTM D5136 : Specification for High Purity p Xylene

  • ASTM D5136-00R04 : Specification for High Purity p-Xylene

  • ASTM D5137 : Specification for Hexyl Acetate

  • ASTM D5137-01 : Specification for Hexyl Acetate

  • ASTM D5138-99A : Specification for Liquid Crystal Polymers

  • ASTM D5139-90R01 : Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

  • ASTM D5140 : Guide for Testing Polyurethane “Poured in Place” Thermal Break Materials (Withdrawn 2004) No Replacement

  • ASTM D5140-95 : Guide for Testing Polyurethane “Poured in Place” Thermal Break Materials (Withdrawn 2004)

  • ASTM D5141 : Test Method for Determining Filtering Efficiency and Flow Rate of a Geotextile for Silt FenceApplication Using Site Specific Soil

  • ASTM D5141-96R04 : Test Method for Determining Filtering Efficiency and Flow Rate of a Geotextile for Silt Fence Application Using Site-Specific Soil

  • ASTM D5142 : Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke byInstrumental Procedures

  • ASTM D5142-04 : Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures

  • ASTM D5143 : Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by HighPerformance Liquid Chromatography

  • ASTM D5143-91R04 : Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

  • ASTM D5144 : Guide for Use of Protective Coating Standards in Nuclear Power Plants

  • ASTM D5144-00 : Guide for Use of Protective Coating Standards in Nuclear Power Plants

  • ASTM D5145 : Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths

  • ASTM D5145-03 : Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths

  • ASTM D5146 : Guide to Testing Solvent Borne Architectural Coatings

  • ASTM D5146-03 : Guide to Testing Solvent-Borne Architectural Coatings

  • ASTM D5147 : Test Methods for Sampling and Testing Modified Bituminous Sheet Material

  • ASTM D5147-02AE01 : Test Methods for Sampling and Testing Modified Bituminous Sheet Material

  • ASTM D5148 : Test Method for Centrifuge Kerosine Equivalent

  • ASTM D514-89 : Test Method for Hydroxide Ion in Water (Withdrawn 1996)

  • ASTM D5148-97R02 : Test Method for Centrifuge Kerosine Equivalent

  • ASTM D5149 : Test Method for Ozone in the Atmosphere : Continuous Measurement by EthyleneChemiluminescence

  • ASTM D5149-02 : Test Method for Ozone in the Atmosphere : Continuous Measurement by Ethylene Chemiluminescence

  • ASTM D5150 : Test Method for Hiding Power of Architectural Paints Applied by Roller

  • ASTM D5150-92R03 : Test Method for Hiding Power of Architectural Paints Applied by Roller

  • ASTM D5151 : Test Method for Detection of Holes in Medical Gloves

  • ASTM D5151-99 : Test Method for Detection of Holes in Medical Gloves

  • ASTM D5152-91 : Practice for Water Extraction of Residual Solids from Degraded Plastics for Toxicity Testing (Withdrawn 1998)

  • ASTM D5153 : Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

  • ASTM D5153-04 : Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

  • ASTM D5154 : Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

  • ASTM D5154-03 : Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

  • ASTM D5154-91 : Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2000)

  • ASTM D5155 : Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content ofAromatic Isocyanates

  • ASTM D5155-01 : Test Methods for Polyurethane Raw Materials : Determination of the Isocyanate Content of Aromatic Isocyanates

  • ASTM D5156 : Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and IndoorAtmospheres (Ultraviolet Absorption)

  • ASTM D5156-02 : Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

  • ASTM D5157 : Guide for Statistical Evaluation of Indoor Air Quality Models

  • ASTM D5157-97R03E01 : Guide for Statistical Evaluation of Indoor Air Quality Models

  • ASTM D5158 : Test Method for Determination of Particle Size of Powdered Activated Carbon by Air JetSieving

  • ASTM D515-88 : Test Methods for Phosphorus in Water (Withdrawn 1997)

  • ASTM D5158-98 : Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving

  • ASTM D5159 : Guide for Dusting Attrition of Granular Activated Carbon

  • ASTM D5159-04 : Guide for Dusting Attrition of Granular Activated Carbon

  • ASTM D516 : Test Method for Sulfate Ion in Water

  • ASTM D5160 : Guide for Gas Phase Adsorption Testing of Activated Carbon

  • ASTM D5160-95R03 : Guide for Gas-Phase Adsorption Testing of Activated Carbon

  • ASTM D5161 : Guide for Specifying Inspection Requirements for Coating and Lining Work (MetalSubstrates)

  • ASTM D5161-04A : Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)

  • ASTM D5162 : Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on MetallicSubstrates

  • ASTM D5162-01 : Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

  • ASTM D5163-05A : Guide for Establishing Procedures to Monitor the Performance of Coating Service Level I Coating Systems in an Operating Nuclear Power Plant

  • ASTM D5164 : Specification for Propylene Glycol and Dipropylene Glycol

  • ASTM D5164-05 : Specification for Propylene Glycol and Dipropylene Glycol

  • ASTM D5165 : Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle

  • ASTM D5165-93R04 : Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle

  • ASTM D5166 : Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

  • ASTM D5166-97R03 : Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

  • ASTM D5167 : Practice for Melting of Hot Applied Joint and Crack Sealant and Filler for Evaluation

  • ASTM D5167-03 : Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

  • ASTM D5168 : Practice for Fabrication and Closure of Triple Wall Corrugated Fiberboard Containers

  • ASTM D5168-03 : Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers

  • ASTM D5169 : Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners

  • ASTM D5169-98R04 : Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners

  • ASTM D517 : Specification for Asphalt Plank

  • ASTM D5170 : Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners

  • ASTM D5170-98R04 : Test Method for Peel Strength (|P`T|P’ Method) of Hook and Loop Touch Fasteners

  • ASTM D5171 : Test Method for Impact Resistance of Plastic Sew Through Flange Buttons

  • ASTM D5171-00 : Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons

  • ASTM D5172 : Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water

  • ASTM D5172-91R04 : Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water

  • ASTM D5173 : Test Method for On Line Monitoring of Carbon Compounds in Water by Chemical Oxidation,

  • ASTM D5173-97R01 : Test Method for On-Line Monitoring of Carbon Compounds in Water by Chemical Oxidation, by UV Light Oxidation, by Both, or by High Temperature Combustion Followed by Gas Phase NDIR or by Electrolytic

  • ASTM D5174 : Test Method for Trace Uranium in Water by Pulsed Laser Phosphorimetry

  • ASTM D5174-02 : Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry

  • ASTM D5175 : Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water byMicroextraction and Gas Chromatography

  • ASTM D5175-91R03 : Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography

  • ASTM D5176 : Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis andChemiluminescence Detection

  • ASTM D5176-91R03 : Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection

  • ASTM D5177 : Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) NoReplacement

  • ASTM D5177-91(1996) : Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005)

  • ASTM D5178 : Test Method for Mar Resistance of Organic Coatings

  • ASTM D5178-98R02 : Test Method for Mar Resistance of Organic Coatings

  • ASTM D5179 : Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by DirectTensile Testing

  • ASTM D5179-02 : Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

  • ASTM D518 : Test Method for Rubber Deterioration Surface Cracking

  • ASTM D5180 : Test Method for Quantitative Test for Turbidity in Clear Liquids

  • ASTM D5180-93R98 : Test Method for Quantitative Test for Turbidity in Clear Liquids

  • ASTM D5181 : Test Method for Abrasion Resistance of Printed Matter by the GA CAT ComprehensiveAbrasion Tester

  • ASTM D5181-04 : Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

  • ASTM D5182 : Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

  • ASTM D5182-97R02E01 : Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

  • ASTM D5183 : Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four BallWear Test Machine

  • ASTM D5183-95R99E01 : Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

  • ASTM D5184 : Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion,

  • ASTM D5184-01 : Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

  • ASTM D5185 : An American National Standard Test Method for Determination of Additive Elements, WearMetals, andContaminants in Used Lubricating Oils and Determination ofSelected Elements in Base Oilsby Inductively CoupledPlasma Atomic Emission Spectrometry

  • ASTM D5185-02E02 : Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission

  • ASTM D5186 : Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content ofDiesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography

  • ASTM D5186-03 : Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography

  • ASTM D5187 : Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X RayDiffraction

  • ASTM D5187-91R02 : Test Method for Determination of Crystallite Size (L of Calcined Petroleum Coke by X-Ray Diffraction

  • ASTM D5188 : Test Method for Vapor Liquid Ratio Temperature Determination of Fuels (EvacuatedChamber Method)

  • ASTM D5188-04A : Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)

  • ASTM D5189-91 : Test Method for Temperature Corresponding to Vapor-Liquid Ratio of 20 for Gasoline and Gasoline-Oxgenate Blends (Bomb Method) (Withdrawn 1993)

  • ASTM D519 : Test Method for Length of Fiber in Wool Top

  • ASTM D5190 : Test Method for Vapor Pressure of Petroleum Products (Automatic Method)

  • ASTM D5190-01 : Test Method for Vapor Pressure of Petroleum Products (Automatic Method)

  • ASTM D5191 : Test Method for Vapor Pressure of Petroleum Products (Mini Method)

  • ASTM D5191-04A : Test Method for Vapor Pressure of Petroleum Products (Mini Method)

  • ASTM D5192 : Practice for Collection of Coal Samples from Core

  • ASTM D5192-99R04 : Practice for Collection of Coal Samples from Core

  • ASTM D5193/D5193M : Test Method for Coated Fabrics Air Retention

  • ASTM D5193/D5193M-93R02 : Test Method for Coated Fabrics\MAir Retention

  • ASTM D5194 : Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

  • ASTM D5194-04 : Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

  • ASTM D5195 : Test Method for Density of Soil and Rock In Place at Depths Below the Surface by NuclearMethods

  • ASTM D5195-02 : Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods

  • ASTM D5196 : Guide for Biomedical Grade Water

  • ASTM D5196-91R99 : Guide for Biomedical Grade Water

  • ASTM D5197 : Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air(Active Sampler Methodology)

  • ASTM D5197-03 : Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

  • ASTM D5198 : Practice for Nitric Acid Digestion of Solid Waste

  • ASTM D5198-92R03 : Practice for Nitric Acid Digestion of Solid Waste

  • ASTM D5199 : Test Method for Measuring the Nominal Thickness of Geosynthetics

  • ASTM D5199-01 : Test Method for Measuring the Nominal Thickness of Geosynthetics

  • ASTM D52 : Withdrawn 1995 : Specification for Wood Paving Blocks for Exposed Platforms, Pavements, Driveways, and Interior Floors Exposed to Wet and Dry Conditions

  • ASTM D520 : Specification for Zinc Dust Pigment

  • ASTM D5200 : Test Method for Determination of Weight Percent Volatile Content of Solvent Borne Paints inAerosol Cans

  • ASTM D5200-03 : Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

  • ASTM D5201 : Practice for Calculating Formulation Physical Constants of Paints and Coatings

  • ASTM D5201-05 : Practice for Calculating Formulation Physical Constants of Paints and Coatings

  • ASTM D5202 : Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

  • ASTM D5202-02 : Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

  • ASTM D5203 : Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled PostConsumer (HDPE) Sources

  • ASTM D5203-02 : Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

  • ASTM D5204 : Classification System for Polyamide Imide (PAI) Molding and Extrusion Materials

  • ASTM D5204-03 : Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

  • ASTM D5205-96R03 : Classification System for Polyetherimide (PEI) Materials

  • ASTM D5206-96R02E01 : Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding

  • ASTM D5207 : Practice for Con?rmation of 20/mm (50/W) and 125/mm (500/W) TestFlames for Small-

  • ASTM D5207-03 : Practice for Confirmation of 20\Nmm (50\NW) and 125\Nmm (500\NW) Test Flames for Small-Scale Burning Tests on Plastic Materials

  • ASTM D5208 : Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

  • ASTM D5208-01 : Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

  • ASTM D5208-91 : Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

  • ASTM D5209-92 : Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004)

  • ASTM D521 : Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)

  • ASTM D5210 : Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in thePresence of Municipal Sewage Sludge

  • ASTM D5210-92R00 : Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

  • ASTM D5211 : Specification for Xylenes for p Xylene Feedstock

  • ASTM D5211-01 : Specification for Xylenes for -Xylene Feedstock

  • ASTM D5212 : Specification for High Load Rotational Confined Elastomeric Bearings for Bridges andStructures (Withdrawn 2004) No Replacement

  • ASTM D5212-03 : Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)

  • ASTM D5213 : Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

  • ASTM D5213-04 : Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

  • ASTM D5214-93 : Test Method for Polyimide Resin Film for Electrical Insulation and Dielectric Aplication (Withdrawn 1995)

  • ASTM D5215 : Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

  • ASTM D5215-93R05 : Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

  • ASTM D5216-98 : Specification for Propylene Glycol Base Engine Coolant for Automobile and Light-Duty Service (Withdrawn 2000)

  • ASTM D5217 : Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials

  • ASTM D5217-91R04 : Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials

  • ASTM D5219 : Terminology Relating to Body Dimensions for Apparel Sizing

  • ASTM D5219-02 : Terminology Relating to Body Dimensions for Apparel Sizing

  • ASTM D522 : Test Methods for Mandrel Bend Test of Attached Organic Coatings

  • ASTM D5220 : Test Method for Water Content of Soil and Rock In Place by the Neutron Depth ProbeMethod

  • ASTM D5220-02 : Test Method for Water Content of Soil and Rock In-Place by the Neutron Depth Probe Method

  • ASTM D5221-92 : Test Method for Continuous Measurement of Formaldehyde in Air (Withdrawn 1997)

  • ASTM D5222 : Specification for High Fire Point Mineral Electrical Insulating Oils

  • ASTM D5222-00 : Specification for High Fire-Point Mineral Electrical Insulating Oils

  • ASTM D5223 : Specification for Engine Coolant Grade Propylene Glycol (Withdrawn 2003) Replaced byE1177

  • ASTM D5223-03 : Specification for Engine Coolant Grade Propylene Glycol (Withdrawn 2003)

  • ASTM D5224 : Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

  • ASTM D5224-00 : Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

  • ASTM D5225 : Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

  • ASTM D5225-98R03 : Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

  • ASTM D5226 : Practice for Dissolving Polymer Materials

  • ASTM D5226-98R03 : Practice for Dissolving Polymer Materials

  • ASTM D5227 : Test Method for Measurement of Hexane Extractable Content of Polyolefins

  • ASTM D5227-01 : Test Method for Measurement of Hexane Extractable Content of Polyolefins

  • ASTM D5228 : Test Method for Determination of Butane Working Capacity of Activated Carbon

  • ASTM D5228-92R00 : Test Method for Determination of the Butane Working Capacity of Activated Carbon

  • ASTM D5229/D5229M : Test Method for Moisture Absorption Properties and Equilibrium Conditioning of PolymerMatrix Composite Materials

  • ASTM D5229/D5229M-92R04 : Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

  • ASTM D523 : Test Method for Specular Gloss

  • ASTM D5230 : Test Method for Carbon Black/Automated Individual Pellet Hardness

  • ASTM D5230-04E01 : Test Method for Carbon Black\MAutomated Individual Pellet Hardness

  • ASTM D5231 : Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

  • ASTM D5231-92R03 : Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste

  • ASTM D5232 : Test Method for Determining the Stability and Miscibility of a Solid, Semi Solid, or LiquidWaste Material

  • ASTM D5232-92R03 : Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

  • ASTM D5233 : Test Method for Single Batch Extraction Method for Wastes

  • ASTM D5233-92R04 : Test Method for Single Batch Extraction Method for Wastes

  • ASTM D5234 : Guide for Analysis of Ethylene Product

  • ASTM D5234-92R02 : Guide for Analysis of Ethylene Product

  • ASTM D5235 : Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on WoodProducts

  • ASTM D5235-97 : Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products

  • ASTM D5236 : Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

  • ASTM D5236-03 : Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

  • ASTM D5237 : Guide for Evaluating Fabric Softeners

  • ASTM D5237-05 : Guide for Evaluating Fabric Softeners

  • ASTM D5237-92e1 : Guide for Evaluating Fabric Softeners (Withdrawn 2001)

  • ASTM D5238 : Test Method for Smoldering Combustion Potential of Cotton Based Batting

  • ASTM D5238-98R03 : Test Method for Smoldering Combustion Potential of Cotton-Based Batting

  • ASTM D5239 : Practice for Characterizing Fly Ash for Use in Soil Stabilization

  • ASTM D5239-04 : Practice for Characterizing Fly Ash for Use in Soil Stabilization

  • ASTM D5240 : Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of SodiumSulfate or Magnesium Sulfate

  • ASTM D5240-04 : Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate

  • ASTM D5241 : Practice for Micro Extraction of Water for Analysis of Volatile and Semi Volatile OrganicCompounds in Water

  • ASTM D5241-92R04 : Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water

  • ASTM D5242 : Test Method for Open Channel Flow Measurement of Water with Thin Plate Weirs

  • ASTM D5242-92R01 : Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs

  • ASTM D5243 : Test Method for Open Channel Flow Measurement of Water Indirectly at Culverts

  • ASTM D5243-92R01 : Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts

  • ASTM D5244 : Practice for Recovery of Enteroviruses from Waters

  • ASTM D5244-92R04 : Practice for Recovery of Enteroviruses from Waters

  • ASTM D5245 : Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used inMicrobiological Analyses

  • ASTM D5245-92R98 : Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses

  • ASTM D5246 : Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water

  • ASTM D5246-92R04 : Test Method for Isolation and Enumeration of from Water

  • ASTM D5247-92 : Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004)

  • ASTM D5248 : Specification for Reclaimed 1,1,2 Trichloro 1,2,2 Trifluoroethane

  • ASTM D5248-04 : Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane

  • ASTM D5249 : Specification for Backer Material for Use with Cold and Hot Applied Joint Sealants in PortlandCement Concrete and Asphalt Joints

  • ASTM D5249-95R00 : Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

  • ASTM D5250 : Specification for Poly(vinyl chloride) Gloves for Medical Application

  • ASTM D5250-00E04 : Specification for Poly(vinyl chloride) Gloves for Medical Application

  • ASTM D5251 : Practice for the Operation of the Tetrapod Walker Drum Tester

  • ASTM D5251-05 : Practice for the Operation of the Tetrapod Walker Drum Tester

  • ASTM D5252 : Practice for the Operation of the Hexapod Drum Tester

  • ASTM D5252-05 : Practice for the Operation of the Hexapod Tumble Drum Tester

  • ASTM D5253 : Terminology Relating to Floor Coverings and Textile Upholstered Furniture

  • ASTM D5253-04 : Terminology Relating to Floor Coverings and Textile Upholstered Furniture

  • ASTM D5254 : Practice for Minimum Set of Data Elements to Identify a Ground Water Site

  • ASTM D5254-92R04 : Practice for Minimum Set of Data Elements to Identify a Ground-Water Site

  • ASTM D5255 : Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

  • ASTM D5255-01 : Practice for Certification of Personnel Engaged in the Testing of Soil and Rock

  • ASTM D5256 : Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water FormedDeposits

  • ASTM D5256-00 : Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits

  • ASTM D5257 : Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

  • ASTM D5257-03 : Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

  • ASTM D5258 : Practice for Acid Extraction of Elements from Sediments Using Closed Vessel MicrowaveHeating

  • ASTM D5258-02 : Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating

  • ASTM D5259 : Test Method for Isolation and Enumeration of Enterococci from Water by the MembraneFilter Procedure

  • ASTM D5259-92R00 : Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure

  • ASTM D5260 : Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer andCopolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

  • ASTM D5260-04 : Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

  • ASTM D5261 : Test Method for Measuring Mass per Unit Area of Geotextiles

  • ASTM D5261-92R03 : Test Method for Measuring Mass per Unit Area of Geotextiles

  • ASTM D5262-04 : Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

  • ASTM D5263 : Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by AlkaliExtraction

  • ASTM D5263-93R01 : Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction

  • ASTM D5264 : Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

  • ASTM D5264-98R04 : Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

  • ASTM D5265 : Test Method for Bridge Impact Testing

  • ASTM D5265-03 : Test Method for Bridge Impact Testing

  • ASTM D5266 : Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

  • ASTM D5266-99R05 : Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

  • ASTM D5267 : Test Method for Determination of Extrudability of Cartridge Adhesives

  • ASTM D526-70 : Method of Test for Tetraethyl-Lead In Gasoline (Withdrawn 1975)

  • ASTM D5267-97 : Test Method for Determination of Extrudability of Cartridge Adhesives

  • ASTM D5268 : Specification for Topsoil Used for Landscaping Purposes

  • ASTM D5268-02 : Specification for Topsoil Used for Landscaping Purposes

  • ASTM D5269 : Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the TheisRecovery Method

  • ASTM D5269-96R02 : Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

  • ASTM D5270 : Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

  • ASTM D5270-96R02 : Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

  • ASTM D5271 : Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an ActivatedSludge Wastewater Treatment System

  • ASTM D5271-02 : Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System

  • ASTM D5272 : Practice for Outdoor Exposure Testing of Photodegradable Plastics

  • ASTM D5272-92R99 : Practice for Outdoor Exposure Testing of Photodegradable Plastics

  • ASTM D5273 : Guide for Analysis of Propylene Concentrates

  • ASTM D527-39(1961) : Method of Test for Bulking Thickness of Paper (Withdrawn 1973)

  • ASTM D5273-92R02 : Guide for Analysis of Propylene Concentrates

  • ASTM D5274 : Guide for Analysis of 1,3 Butadiene Product

  • ASTM D5274-00 : Guide for Analysis of 1,3\NButadiene Product

  • ASTM D5275 : Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

  • ASTM D5275-03 : Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

  • ASTM D5276 : Test Method for Drop Test of Loaded Containers by Free Fall

  • ASTM D5276-98R04 : Test Method for Drop Test of Loaded Containers by Free Fall

  • ASTM D5277 : Test Method for Performing Programmed Horizontal Impacts Using an Inclined ImpactTester

  • ASTM D5277-92R02 : Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester

  • ASTM D5278 : Test Method for Elongation of Narrow Elastic Fabrics (Static Load Testing)

  • ASTM D5278-98R04 : Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)

  • ASTM D5279 : Test Method for Plastics : Dynamic Mechanical Properties : In Torsion

  • ASTM D5279-01 : Test Method for Plastics : Dynamic Mechanical Properties : In Torsion

  • ASTM D5280 : Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methodswith Linear Calibration Functions

  • ASTM D5280-96R01 : Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions

  • ASTM D5281 : Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres

  • ASTM D5281-98R05 : Test Method for Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres

  • ASTM D5282 : Test Methods for Compatibility of Construction Material with Silicone Fluid Used for ElectricalInsulation

  • ASTM D5282-98 : Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation

  • ASTM D5283 : Practice for Generation of Environmental Data Related to Waste Management Activities :

  • ASTM D5283-92R03 : Practice for Generation of Environmental Data Related to Waste Management Activities : Quality Assurance and Quality Control Planning and Implementation

  • ASTM D5284 : Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid

  • ASTM D5284-93R04E01 : Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid

  • ASTM D5285 : Test Method for 24 Hour Batch Type Measurement of Volatile Organic Sorption by Soils andSediments

  • ASTM D5285-03 : Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments

  • ASTM D5286 : Test Methods for Determination of Transfer Efficiency Under General Production Conditionsfor Spray Application of Paints

  • ASTM D5286-01R05 : Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

  • ASTM D5287 : Practice for Automatic Sampling of Gaseous Fuels

  • ASTM D5287-97R02 : Practice for Automatic Sampling of Gaseous Fuels

  • ASTM D5288 : Test Method for Determining the Tracking Index of Electrical Insulating Materials UsingVarious Electrode Materials (Excluding Platinum)

  • ASTM D5288-97R04 : Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)

  • ASTM D5289 : Test Method for Rubber Property/Vulcanization Using Rotorless Cure Meters

  • ASTM D5289-95R01 : Test Method for Rubber Property\MVulcanization Using Rotorless Cure Meters

  • ASTM D529 : Practice for Enclosed Carbon Arc Exposures of Bituminous Materials

  • ASTM D5290-91 : Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997)

  • ASTM D5291 : Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen inPetroleum Products and Lubricants

  • ASTM D5291-02 : Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

  • ASTM D5292 : Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution NuclearMagnetic Resonance Spectroscopy

  • ASTM D5292-99R04 : Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

  • ASTM D5293-04 : Test Method for Apparent Viscosity of Engine Oils Between \-5 and \-35|SDC Using the Cold-Cranking Simulator

  • ASTM D5294-92 : Test Method for Determination of Beta Resins (BR) in Pitch (Withdrawn 1998)

  • ASTM D5295 : Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane WaterproofingSystems

  • ASTM D5295-00 : Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

  • ASTM D5296 : Test Method for Molecular Weight Averages and Molecular Weight Distribution ofPolystyrene by High Performance Size Exclusion Chromatography

  • ASTM D5296-05 : Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

  • ASTM D5297 : Test Methods for Rubber Chemical Accelerator Purity by High Performance LiquidChromatography

  • ASTM D5297-95R04 : Test Methods for Rubber Chemical Accelerator\MPurity by High Performance Liquid Chromatography

  • ASTM D5298 : Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

  • ASTM D5298-03 : Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

  • ASTM D5298-94 : Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

  • ASTM D5299 : Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices,

  • ASTM D5299-99 : Guide for Decommissioning of Ground Water Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

  • ASTM D5300-93 : Test Method for Measurement of Resin Content and Other Related Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanical and Ultrasonic Methods (Withdrawn 2000)

  • ASTM D5301 : Practice for Physical Characterization of Paint Brushes

  • ASTM D5301-92R02 : Practice for Physical Characterization of Paint Brushes

  • ASTM D5302 : Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formationand Wear in a Spark Ignition Internal Combustion Engine Fueled with Gasoline and Operated UnderLow Temperature, Light Duty Conditions (Withdrawn 2003) No Re

  • ASTM D5302-01a : Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-

  • ASTM D5303-92R02E01 : Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

  • ASTM D5304 : Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

  • ASTM D5304-03 : Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

  • ASTM D5305 : Test Method for Determination of Ethyl Mercaptan in LP Gas Vapor

  • ASTM D5305-97R02 : Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

  • ASTM D5306 : Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

  • ASTM D5306-92R02E01 : Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

  • ASTM D5307 : Test Method for Determination of Boiling Range Distribution of Crude Petroleum by GasChromatography

  • ASTM D5307-97R02E01 : Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography

  • ASTM D530-81(1985) : Methods of Testing Hard Rubber Products (Withdrawn 1987)

  • ASTM D5308-92 : Methods of Testing Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications (Withdrawn 1998)

  • ASTM D5309 : Specification for Cyclohexane 999

  • ASTM D5309-02 : Specification for Cyclohexane 999

  • ASTM D531 : Test Method for Rubber Property Pusey and Jones Indentation

  • ASTM D5310 : Test Method for Tar Acid Composition by Capillary Gas Chromatography

  • ASTM D5310-00R04 : Test Method for Tar Acid Composition by Capillary Gas Chromatography

  • ASTM D5311 : Test Method for Load Controlled Cyclic Triaxial Strength of Soil

  • ASTM D5311-92R04 : Test Method for Load Controlled Cyclic Triaxial Strength of Soil

  • ASTM D5312 : Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing andThawing Conditions

  • ASTM D5312-04 : Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

  • ASTM D5313 : Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting andDrying Conditions

  • ASTM D5313-04 : Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

  • ASTM D5314 : Guide for Soil Gas Monitoring in the Vadose Zone

  • ASTM D5314-92R01 : Guide for Soil Gas Monitoring in the Vadose Zone

  • ASTM D5315 : Test Method for Determination of N Methyl Carbamoyloximes and N Methylcarbamates inWater by Direct Aqueous Injection HPLC with Post Column Derivatization

  • ASTM D5315-04 : Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization

  • ASTM D5316 : Test Method for 1,2 Dibromoethane and 1,2 Dibromo 3 Chloropropane in Water byMicroextraction and Gas Chromatography

  • ASTM D5316-98R04 : Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography

  • ASTM D5317 : Test Method for Determination of Chlorinated Organic Acid Compounds in Water by GasChromatography with an Electron Capture Detector

  • ASTM D5317-98R03E01 : Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector

  • ASTM D5318 : Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates(Withdrawn 2004) No Replacement

  • ASTM D5318-97 : Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates (Withdrawn 2004)

  • ASTM D5319 : Specification for Glass Fiber Reinforced Polyester Wall and Ceiling Panels

  • ASTM D5319-97R01 : Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

  • ASTM D5320 : Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene

  • ASTM D5320-96(2000) : Test Methods for Determination of 1,1,1-Trichloroethane and Methylene Chloride Content in Stabilized Trichloroethylene and Tetrachloroethylene (Withdrawn 2004)

  • ASTM D5321 : Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic andGeosynthetic Friction by the Direct Shear Method

  • ASTM D5321-02 : Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method

  • ASTM D5322 : Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosyntheticsto Liquids

  • ASTM D5322-98R03 : Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

  • ASTM D5323 : Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes

  • ASTM D5323-92R99 : Practice for Determination of 2 \% Secant Modulus for Polyethylene Geomembranes

  • ASTM D53-24 : Specification for Rubber Belting for Power Transmission (Withdrawn 1928)

  • ASTM D5324 : Guide for Testing Water Borne Architectural Coatings

  • ASTM D5324-03 : Guide for Testing Water-Borne Architectural Coatings

  • ASTM D5325 : Test Method for Determination of Weight Percent Volatile Content of Water Borne AerosolPaints

  • ASTM D5325-03 : Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints

  • ASTM D5326 : Test Method for Color Development in Tinted Latex Paints

  • ASTM D5326-94AR02 : Test Method for Color Development in Tinted Latex Paints

  • ASTM D5327 : Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings UnderGeneral Laboratory Conditions

  • ASTM D5327-97R02 : Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions

  • ASTM D5328-92(1997) : Test Method for Volatile Organic Compound (VOC40) Content of Non-Heatset Paste Printing Ink Systems at 40 °C (Withdrawn 2001)

  • ASTM D5329 : Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic andPortland Cement Concrete Pavements

  • ASTM D532-90 : Specification for Natural Rubber Jacket for Wire and Cable (Withdrawn 1996)

  • ASTM D5329-04 : Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

  • ASTM D5330/D5330M : Specification for Pressure Sensitive Tape for Packaging, Filament Reinforced

  • ASTM D5330/D5330M-04 : Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced

  • ASTM D5331 : Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with StretchWrap Films

  • ASTM D5331-03 : Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films

  • ASTM D5332 : Test Method for Fiber Length and Length Distribution of Cotton Fibers (Withdrawn 2006) NoReplacement

  • ASTM D5332-00 : Test Method for Fiber Length and Length Distribution of Cotton Fibers

  • ASTM D5333 : Test Method for Measurement of Collapse Potential of Soils

  • ASTM D5333-03 : Test Method for Measurement of Collapse Potential of Soils

  • ASTM D5334 : Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by ThermalNeedle Probe Procedure

  • ASTM D5334-00R04 : Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

  • ASTM D5335 : Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded ElectricResistance Strain Gages

  • ASTM D5335-04 : Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages

  • ASTM D5336 : Specification for Polyphthalamide (PPA) Injection Molding Materials

  • ASTM D5336-03 : Specification for Polyphthalamide (PPA) Injection Molding Materials

  • ASTM D533-69(1995) : Specification for Built Soap, Powdered (Withdrawn 2000)

  • ASTM D5337-04 : Practice for Flow Rate Calibration of Personal Sampling Pumps

  • ASTM D5338 : Test Method for Determining Aerobic Biodegradation of Plastic Materials Under ControlledComposting Conditions

  • ASTM D5338-98R03 : Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions

  • ASTM D5339 : Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures(Withdrawn 2005) No Replacement

  • ASTM D5339-94(1998) : Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005)

  • ASTM D5339-94R98 : Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures

  • ASTM D5340 : Test Method for Airport Pavement Condition Index Surveys

  • ASTM D5340-04E01 : Test Method for Airport Pavement Condition Index Surveys

  • ASTM D5341 : Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction(CSR)

  • ASTM D5341-99R04 : Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

  • ASTM D5342 : Test Method for Resistance to Bending of Paper and Paperboard (Taber Type Tester in BasicConfiguration)

  • ASTM D5342-97R02 : Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)

  • ASTM D5343 : Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

  • ASTM D5343-97 : Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

  • ASTM D5344 : Test Method for Extension Force of Partially Oriented Yarn

  • ASTM D5344-99R05 : Test Method for Extension Force of Partially Oriented Yarn

  • ASTM D5345-98 : Specification for Prediluted Aqueous Ethylene Glycol Base Low-Silicate Engine Coolant (50 Volume % Minimum) for Heavy-Duty Engines Requiring an Initial Charge of Supplemental Coolant Additive (SCA) (Withdrawn

  • ASTM D5346 : Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors andSoftening Compounds

  • ASTM D5346-93R03E01 : Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds

  • ASTM D5347 : Test Method for Determination of the Ash Content of Fats and Oils

  • ASTM D534-74(1995) : Specification for Alkaline Soap Powder (Withdrawn 2000)

  • ASTM D5347-95R01 : Test Method for Determination of the Ash Content of Fats and Oils

  • ASTM D5348 : Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils byDistillation with Xylene

  • ASTM D5348-95R01 : Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene

  • ASTM D5349 : Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot Plate Method

  • ASTM D5349-95R01 : Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method

  • ASTM D5350 : Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, TestMethod A

  • ASTM D5350-95R01 : Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A

  • ASTM D5351 : Test Method for Determination of Organically Combined Sulfuric Anhydride by ExtractionTitration, Test Method B

  • ASTM D5351-93R03 : Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B

  • ASTM D5352 : Test Method for Determination of Organically Combined Sulfuric Anhydride Ash Gravimetric, Test Method C

  • ASTM D5352-95R01 : Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C

  • ASTM D5353 : Test Method for Determination of Total Desulfated Fatty Matter

  • ASTM D5353-95R01 : Test Method for Determination of Total Desulfated Fatty Matter

  • ASTM D5354 : Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils

  • ASTM D5354-95R01 : Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils

  • ASTM D5355 : Test Method for Specific Gravity of Oils and Liquid Fats

  • ASTM D535-52(1958) : Specification for Palm Oil Solid Soap (Type A, Straight; Type B, Blended) (Withdrawn 1958)

  • ASTM D5355-95R01 : Test Method for Specific Gravity of Oils and Liquid Fats

  • ASTM D5356 : Test Method for PH of Chrome Tanning Solutions

  • ASTM D5356-93R03 : Test Method for pH of Chrome Tanning Solutions

  • ASTM D5357 : Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X RayDiffraction

  • ASTM D5357-03 : Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

  • ASTM D5358 : Practice for Sampling with a Dipper or Pond Sampler

  • ASTM D5358-93R03 : Practice for Sampling with a Dipper or Pond Sampler

  • ASTM D5359 : Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber

  • ASTM D5359-98R04 : Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber

  • ASTM D5360 : Practice for Design and Construction of Bituminous Surface Treatments

  • ASTM D5360-05 : Practice for Design and Construction of Bituminous Surface Treatments

  • ASTM D5361 : Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

  • ASTM D5361-00 : Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

  • ASTM D5362 : Test Method for Snagging Resistance of Fabrics (Bean Bag)

  • ASTM D5362-03R04 : Test Method for Snagging Resistance of Fabrics (Bean Bag)

  • ASTM D5363 : Specification for Anaerobic Single Component Adhesives (AN)

  • ASTM D5363-03 : Specification for Anaerobic Single-Component Adhesives (AN)

  • ASTM D536-41(1958) : Specification for Palm Oil Chip Soap (Type A, Straight; Type B, Blended) (Withdrawn 1958)

  • ASTM D5364-93R02 : Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units

  • ASTM D5365-01E01 : Test Method for Long-Term Ring-Bending Strain of |P`Fiberglass|P’ (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

  • ASTM D5366 : Test Method for Determining the Dynamic Performance of a Wind Vane

  • ASTM D5366-96R02E01 : Test Method for Determining the Dynamic Performance of a Wind Vane

  • ASTM D5367 : Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used toPrevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

  • ASTM D5367-00 : Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

  • ASTM D5368 : Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) ofSolid Waste Samples

  • ASTM D5368-93R01 : Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples

  • ASTM D5369 : Practice for Extraction of Solid Waste Samples for Chemical Analysis Using SoxhletExtraction

  • ASTM D5369-93R03 : Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction

  • ASTM D5370 : Specification for Pozzolanic Blended Materials in Construction Applications

  • ASTM D5370-96R02 : Specification for Pozzolanic Blended Materials in Construction Applications

  • ASTM D5372 : Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

  • ASTM D5372-04 : Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

  • ASTM D5373 : Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen inLaboratory Samples of Coal and Coke

  • ASTM D5373-02 : Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke

  • ASTM D5374 : Test Methods for Forced Convection Laboratory Ovens for Evaluation of Electrical Insulation

  • ASTM D5374-93R99 : Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

  • ASTM D5375/D5375M : Test Methods for Liner Removal at High Speeds from Pressure Sensitive Label Stock

  • ASTM D5375/D5375M-98R04 : Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

  • ASTM D5376 : Test Method for Rubber Chemicals/Determination of the Percent Nitrogen in RubberAntioxidant : Polymerized TMQ

  • ASTM D5376-93R02 : Test Method for Rubber Chemicals\MDetermination of the Percent Nitrogen in Rubber Antioxidant : Polymerized TMQ

  • ASTM D5377 : Classification for Rubber Compounding Materials/Ground Coal

  • ASTM D5377-93R02 : Classification for Rubber Compounding Materials\MGround Coal

  • ASTM D5378 : Performance Specification for Woven and Knitted Shower Curtains for Institutional andHousehold Use

  • ASTM D537-85(1997) : Specification for Sodium Metasilicate (Withdrawn 2001)

  • ASTM D5378-93R00 : Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use

  • ASTM D5379/D5379M : Test Method for Shear Properties of Composite Materials by the V Notched Beam Method

  • ASTM D5379/D5379M-05 : Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

  • ASTM D5380 : Test Method for Identification of Crystalline Pigments and Extenders in Paint by X RayDiffraction Analysis

  • ASTM D5380-93R03 : Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis

  • ASTM D5381 : Guide for X Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders

  • ASTM D5381-93R03 : Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders

  • ASTM D5382 : Guide to Evaluation of Optical Properties of Powder Coatings

  • ASTM D5382-02 : Guide to Evaluation of Optical Properties of Powder Coatings

  • ASTM D5383 : Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

  • ASTM D5383-02R03 : Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

  • ASTM D5384 : Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

  • ASTM D5384-95R00E01 : Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

  • ASTM D5385 : Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes

  • ASTM D5385-93R00E01 : Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes

  • ASTM D5386 : Test Method for Color of Liquids Using Tristimulus Colorimetry

  • ASTM D5386-05 : Test Method for Color of Liquids Using Tristimulus Colorimetry

  • ASTM D5387 : Guide for Elements of a Complete Data Set for Non Cohesive Sediments

  • ASTM D5387-93R02 : Guide for Elements of a Complete Data Set for Non-Cohesive Sediments

  • ASTM D5388 : Test Method for Indirect Measurements of Discharge by Step Backwater Method

  • ASTM D538-85(1997) : Specification for Trisodium Phosphate (Withdrawn 2001)

  • ASTM D5388-93R02 : Test Method for Indirect Measurements of Discharge by Step-Backwater Method

  • ASTM D5389 : Test Method for Open Channel Flow Measurement by Acoustic Velocity Meter Systems

  • ASTM D5389-93R02 : Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems

  • ASTM D5390 : Test Method for Open Channel Flow Measurement of Water with Palmer Bowlus Flumes

  • ASTM D5390-93R02 : Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes

  • ASTM D5391 : Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity WaterSample

  • ASTM D5391-99 : Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

  • ASTM D5392 : Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two StepMembrane Filter Procedure

  • ASTM D5392-93R00 : Test Method for Isolation and Enumeration of in Water by the Two-Step Membrane Filter Procedure

  • ASTM D5393-97 : Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998)

  • ASTM D5394 : Specification for Reclaimed 1,1,1 Trichloroethane

  • ASTM D5394-02 : Specification for Reclaimed 1,1,1-Trichloroethane

  • ASTM D5395 : Specification for Reclaimed Methylene Chloride

  • ASTM D5395-03 : Specification for Reclaimed Methylene Chloride,

  • ASTM D539-51(1955) : Methods of Test for Apparent Fluidity of Dispersions of Cellulose Fibers (Withdrawn 1969)

  • ASTM D5396 : Specification for Reclaimed Perchloroethylene

  • ASTM D5396-04 : Specification for Reclaimed Perchloroethylene

  • ASTM D5397-99 : Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

  • ASTM D5398 : Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

  • ASTM D5398-97R03 : Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

  • ASTM D5399 : Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

  • ASTM D5399-04 : Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

  • ASTM D5400 : Test Methods for Hydroxypropylcellulose

  • ASTM D5400-03 : Test Methods for Hydroxypropylcellulose

  • ASTM D5401 : Test Method for Evaluating Clear Water Repellent Coatings on Wood

  • ASTM D5401-03 : Test Method for Evaluating Clear Water Repellent Coatings on Wood

  • ASTM D5401-93 : Test Method for Evaluating Clear Water Repellent Coatings on Wood (Withdrawn 2002)

  • ASTM D5402 : Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

  • ASTM D5402-93R99 : Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

  • ASTM D5403 : Test Methods for Volatile Content of Radiation Curable Materials

  • ASTM D5403-93R02 : Test Methods for Volatile Content of Radiation Curable Materials

  • ASTM D5404 : Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

  • ASTM D5404-03 : Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

  • ASTM D5405 : Test Method for Conducting Time to Failure (Creep Rupture) Tests of Joints Fabricated fromNonbituminous Organic Roof Membrane Material

  • ASTM D540-57 : Methods of Testing Man-Made Staple Fibers (Withdrawn 1973)

  • ASTM D5405-98R04 : Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

  • ASTM D5406 : Practice for Rubber/Calculation of Producer’s Process Performance Indexes

  • ASTM D5406-93R02 : Practice for Rubber\MCalculation of Producer’s Process Performance Indexes

  • ASTM D5407 : Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in TriaxialCompression Without Pore Pressure Measurement (Withdrawn 2005) Replaced by D7012

  • ASTM D5407-95(2000) : Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement (Withdrawn 2005)

  • ASTM D5407-95R00 : Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement

  • ASTM D5408 : Guide for Set of Data Elements to Describe a Ground Water Site; Part One AdditionalIdentification Descriptors

  • ASTM D5408-93R04 : Guide for Set of Data Elements to Describe a Ground-Water Site; Part One\MAdditional Identification Descriptors

  • ASTM D5409 : Guide for Set of Data Elements to Describe a Ground Water Site; Part Two PhysicalDescriptors

  • ASTM D5409-93R04 : Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two\MPhysical Descriptors

  • ASTM D5410 : Guide for Set of Data Elements to Describe a Ground Water Site; Part Three UsageDescriptors

  • ASTM D5410-93R98 : Guide for Set of Data Elements to Describe a Ground-Water Site;Part Three\MUsage Descriptors

  • ASTM D5411 : Practice for Calculation of Average Energy Per Disintegration (E) for a Mixture ofRadionuclides in Reactor Coolant

  • ASTM D5411-93R05E01 : Practice for Calculation of Average Energy Per Disintegration (|$$|AmE) for a Mixture of Radionuclides in Reactor Coolant

  • ASTM D5412 : Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures orPetroleum Oils in Water

  • ASTM D5412-93R00 : Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water

  • ASTM D5413 : Test Methods for Measurement of Water Levels in Open Water Bodies

  • ASTM D5413-93R02 : Test Methods for Measurement of Water Levels in Open-Water Bodies

  • ASTM D5414 : Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch WrapFilms

  • ASTM D5414-95R01 : Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films

  • ASTM D5415 : Test Method for Evaluating Load Containment Performance of Stretch Wrap Films byVibration Testing

  • ASTM D5415-95R01 : Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing

  • ASTM D5416 : Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing

  • ASTM D5416-95R01 : Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing

  • ASTM D5417 : Practice for Operation of the Vettermann Drum Tester

  • ASTM D5417-05 : Practice for Operation of the Vettermann Drum Tester

  • ASTM D5418 : Test Method for Plastics : Dynamic Mechanical Properties : In Flexure (Dual Cantilever Beam)

  • ASTM D5418-01 : Test Method for Plastics : Dynamic Mechanical Properties : In Flexure (Dual Cantilever Beam)

  • ASTM D541-87 : Specification for Single Jute Yarn (Withdrawn 1996)

  • ASTM D5419 : Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

  • ASTM D5419-95R03 : Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

  • ASTM D542 : Test Method for Index of Refraction of Transparent Organic Plastics

  • ASTM D5420 : Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a StrikerImpacted by a Falling Weight (Gardner Impact)

  • ASTM D5420-04 : Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

  • ASTM D5421 : Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Flanges

  • ASTM D5421-00 : Specification for Contact Molded |P`Fiberglass|P’ (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

  • ASTM D5422 : Test Method for Measurement of Properties of Thermoplastic Materials by Screw ExtrusionCapillary Rheometer

  • ASTM D5422-03 : Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

  • ASTM D5423 : Specification for Forced Convection Laboratory Ovens for Evaluation of Electrical Insulation

  • ASTM D5423-93R99 : Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

  • ASTM D5424-99 : Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

  • ASTM D5425-02 : Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

  • ASTM D5426 : Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints

  • ASTM D5426-03 : Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints

  • ASTM D5427-03 : Practice for Accelerated Aging of Inflatable Restraint Fabrics

  • ASTM D5428-02 : Practice for Evaluating the Performance of Inflatable Restraint Modules

  • ASTM D5429 : Practice for Pretreatment of Backing Fabrics Used in Textile Conservation Research

  • ASTM D5429-04 : Practice for Pretreatment of Backing Fabrics Used in Textile Conservation Research

  • ASTM D5429-93 : Practice for Pretreatment of Backing Fabrics Used in Textile Conservation Research (Withdrawn 2000)

  • ASTM D543 : Practices for Evaluating the Resistance of Plastics to Chemical Reagents

  • ASTM D5430 : Test Methods for Visually Inspecting and Grading Fabrics

  • ASTM D5430-04 : Test Methods for Visually Inspecting and Grading Fabrics

  • ASTM D54-31 : Methods of Testing Rubber (Withdrawn 1933)

  • ASTM D5431 : Performance Specification for Woven and Knitted Sheeting Products for Institutional andHousehold Use

  • ASTM D5431-93R01E01 : Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use

  • ASTM D5432 : Performance Specification for Blanket Products for Institutional and Household Use

  • ASTM D5432-93R00E01 : Performance Specification for Blanket Products for Institutional and Household Use

  • ASTM D5433 : Performance Specification for Towel Products for Institutional and Household Use

  • ASTM D5433-00 : Performance Specification for Towel Products for Institutional and Household Use

  • ASTM D5434 : Guide for Field Logging of Subsurface Explorations of Soil and Rock

  • ASTM D5434-03 : Guide for Field Logging of Subsurface Explorations of Soil and Rock

  • ASTM D5435 : Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

  • ASTM D5435-03 : Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection

  • ASTM D5436 : Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

  • ASTM D5436-03 : Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

  • ASTM D5437-93 : Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999)

  • ASTM D5438 : Practice for Collection of Floor Dust for Chemical Analysis

  • ASTM D5438-05 : Practice for Collection of Floor Dust for Chemical Analysis

  • ASTM D5439 : Test Method for Determination of Sediment in Moellon

  • ASTM D5439-95R01 : Test Method for Determination of Sediment in Moellon

  • ASTM D5440 : Test Method for Determining the Melting Point of Fats and Oils

  • ASTM D5440-93R03 : Test Method for Determining the Melting Point of Fats and Oils

  • ASTM D5441 : Test Method for Analysis of Methyl Tert Butyl Ether (MTBE) by Gas Chromatography

  • ASTM D5441-98R03E01 : Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

  • ASTM D5442 : Test Method for Analysis of Petroleum Waxes by Gas Chromatography

  • ASTM D5442-93R03E01 : Test Method for Analysis of Petroleum Waxes by Gas Chromatography

  • ASTM D5443 : Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in PetroleumDistillates Through 200°C by Multi Dimensional Gas Chromatography

  • ASTM D5443-04 : Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200|SDC by Multi-Dimensional Gas Chromatography

  • ASTM D5444 : Test Method for Mechanical Size Analysis of Extracted Aggregate

  • ASTM D5444-05 : Test Method for Mechanical Size Analysis of Extracted Aggregate

  • ASTM D5445 : Practice for Pictorial Markings for Handling of Goods

  • ASTM D5445-03A : Practice for Pictorial Markings for Handling of Goods

  • ASTM D5446 : Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used inInflatable Restraints

  • ASTM D5446-02 : Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints

  • ASTM D5447 : Guide for Application of a Ground Water Flow Model to a Site Specific Problem

  • ASTM D5447-04 : Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem

  • ASTM D5447-93e1 : Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem (Withdrawn 2002)

  • ASTM D5448/D5448M : Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix CompositeCylinders

  • ASTM D5448/D5448M-93R00 : Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

  • ASTM D5449/D5449M : Test Method for Transverse Compressive Properties of Hoop Wound Polymer MatrixComposite Cylinders

  • ASTM D5449/D5449M-93R00 : Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

  • ASTM D545 : Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextrudingand Resilient Types)

  • ASTM D5450/D5450M : Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix CompositeCylinders

  • ASTM D5450/D5450M-93R00 : Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

  • ASTM D5451 : Practice for Sampling Using a Trier Sampler

  • ASTM D5451-93R04 : Practice for Sampling Using a Trier Sampler

  • ASTM D5452-00 : Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

  • ASTM D5453 : Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oilsby Ultraviolet Fluorescence

  • ASTM D5453-04 : Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

  • ASTM D5454 : Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

  • ASTM D5454-04 : Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

  • ASTM D5455 : Test Method for Short Term Liquid Sorption Into Paper (Bristow Test)

  • ASTM D5455-93R03 : Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test)

  • ASTM D5456 : Specification for Evaluation of Structural Composite Lumber Products

  • ASTM D5456-05 : Specification for Evaluation of Structural Composite Lumber Products

  • ASTM D5457 : Specification for Computing Reference Resistance of Wood Based Materials and StructuralConnections for Load and Resistance Factor Design

  • ASTM D5457-04A : Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

  • ASTM D5458 : Test Method for Peel Cling of Stretch Wrap Film

  • ASTM D5458-95R01 : Test Method for Peel Cling of Stretch Wrap Film

  • ASTM D5459 : Test Method for Machine Direction Elastic Recovery and Permanent Deformation and StressRetention of Stretch Wrap Film

  • ASTM D5459-95R01 : Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film

  • ASTM D5460 : Test Method for Rubber Compounding Materials/Water in Rubber Additives

  • ASTM D5460-02 : Test Method for Rubber Compounding Materials\MWater in Rubber Additives

  • ASTM D5461 : Test Method for Rubber Additives/Wet Sieve Analysis of Powdered Rubber Chemicals

  • ASTM D5461-02 : Test Method for Rubber Additives\MWet Sieve Analysis of Powdered Rubber Chemicals

  • ASTM D5462 : Test Method for On Line Measurement of Low Level Dissolved Oxygen in Water

  • ASTM D5462-02 : Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water

  • ASTM D5463 : Guide for Use of Test Kits to Measure Inorganic Constituents in Water

  • ASTM D5463-03 : Guide for Use of Test Kits to Measure Inorganic Constituents in Water

  • ASTM D5464-93R01 : Test Methods for pH Measurement of Water of Low Conductivity

  • ASTM D5465 : Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods

  • ASTM D5465-93R04 : Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods

  • ASTM D5466 : Test Method for Determination of Volatile Organic Chemicals in Atmospheres (CanisterSampling Methodology)

  • ASTM D5466-01 : Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

  • ASTM D5467/D5467M : Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Usinga Sandwich Beam

  • ASTM D5467/D5467M-97R04 : Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam

  • ASTM D5468 : Test Method for Gross Calorific and Ash Value of Waste Materials

  • ASTM D5468-02 : Test Method for Gross Calorific and Ash Value of Waste Materials

  • ASTM D5469 : Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

  • ASTM D5469-00 : Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems

  • ASTM D5470-01 : Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials

  • ASTM D5471 : Specification for O Xylene 980

  • ASTM D5471-04E01 : Specification for O-Xylene 980

  • ASTM D5472 : Test Method for Determining Specific Capacity and Estimating Transmissivity at the ControlWell

  • ASTM D5472-93R99E01 : Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well

  • ASTM D5473 : Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration ofControl Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a NonleakyConfined Aquifer

  • ASTM D5473-93R00 : Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

  • ASTM D5474 : Guide for Selection of Data Elements for Ground Water Investigations

  • ASTM D547-41(1980) : Test Method for Index of Dustiness of Coal and Coke (Withdrawn 1986)

  • ASTM D5474-93R00 : Guide for Selection of Data Elements for Ground-Water Investigations

  • ASTM D5475 : Test Method for Nitrogen and Phosphorus Containing Pesticides in Water by GasChromatography with a Nitrogen Phosphorus Detector

  • ASTM D5475-93R02 : Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector

  • ASTM D5476 : Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005) NoReplacement

  • ASTM D5476-99 : Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)

  • ASTM D5477-02 : Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

  • ASTM D5478 : Test Methods for Viscosity of Materials by a Falling Needle Viscometer

  • ASTM D5478-98R03 : Test Methods for Viscosity of Materials by a Falling Needle Viscometer

  • ASTM D5479 : Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

  • ASTM D5479-94R00 : Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

  • ASTM D548 : Test Method for Water Soluble Acidity or Alkalinity of Paper

  • ASTM D5480 : Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003) NoReplacement

  • ASTM D5480-95(1999)e1 : Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003)

  • ASTM D5481 : Test Method for Measuring Apparent Viscosity at High Temperature and High Shear Rate byMulticell Capillary Viscometer

  • ASTM D5481-04 : Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

  • ASTM D5482-01 : Test Method for Vapor Pressure of Petroleum Products (Mini Method\MAtmospheric)

  • ASTM D5483 : Test Method for Oxidation Induction Time of Lubricating Greases by Pressure DifferentialScanning Calorimetry

  • ASTM D5483-02 : Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

  • ASTM D5484 : Specification for Steel Grid Bridge Flooring (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM D5484-99 : Specification for Steel Grid Bridge Flooring (Withdrawn 2004)

  • ASTM D5485-99 : Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

  • ASTM D5486/D5486M : Specification for Pressure Sensitive Tape for Packaging, Box Closure, and Sealing

  • ASTM D5486/D5486M-04 : Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing

  • ASTM D5487 : Test Method for Simulated Drop of Loaded Containers by Shock Machines

  • ASTM D5487-98R02 : Test Method for Simulated Drop of Loaded Containers by Shock Machines

  • ASTM D5488 : Terminology of Environmental Labeling of Packaging Materials and Packages

  • ASTM D5488-94de1 : Terminology of Environmental Labeling of Packaging Materials and Packages (Withdrawn 2002)

  • ASTM D5489 : Guide for Care Symbols for Care Instructions on Textile Products

  • ASTM D5489-01A : Guide for Care Symbols for Care Instructions on Textile Products

  • ASTM D5490 : Guide for Comparing Ground Water Flow Model Simulations to Site Specific Information

  • ASTM D5490-93R02 : Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information

  • ASTM D5491 : Classification for Recycled Post Consumer Polyethylene Film Sources for Molding andExtrusion Materials

  • ASTM D5491-03 : Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

  • ASTM D5492 : Test Method for Determination of Xylene Solubles in Propylene Plastics

  • ASTM D5492-98R03E01 : Test Method for Determination of Xylene Solubles in Propylene Plastics

  • ASTM D5493 : Test Method for Permittivity of Geotextiles Under Load

  • ASTM D5493-93R03 : Test Method for Permittivity of Geotextiles Under Load

  • ASTM D5494 : Test Method for the Determination of Pyramid Puncture Resistance of Unprotected andProtected Geomembranes

  • ASTM D5494-93R99E01 : Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes

  • ASTM D5495 : Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)

  • ASTM D5495-03 : Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)

  • ASTM D5496 : Practice for In Field Immersion Testing of Geosynthetics

  • ASTM D5496-98R03 : Practice for In Field Immersion Testing of Geosynthetics

  • ASTM D5497 : Termninology Relating to Buttons

  • ASTM D5497-94CR00 : Terminology Relating to Buttons

  • ASTM D5498 : Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities

  • ASTM D5498-01 : Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities

  • ASTM D549-88 : Test Methods for Rosin in Paper and Paperboard (Withdrawn 1993)

  • ASTM D5499 : Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems

  • ASTM D5499-94R99 : Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems

  • ASTM D5500 : Test Method for Vehicle Evaluation of Unleaded Automotive Spark Ignition Engine Fuel forIntake Valve Deposit Formation

  • ASTM D5500-98R03E01 : Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

  • ASTM D5501-04 : Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography

  • ASTM D5502 : Test Method for Apparent Density by Physical Measurements of Manufactured Anode andCathode Carbon Used by the Aluminum Industry

  • ASTM D5502-00 : Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

  • ASTM D5503 : Practice for Natural Gas Sample Handling and Conditioning Systems for PipelineInstrumentation

  • ASTM D5503-94R03 : Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation

  • ASTM D5504 : Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels byGas Chromatography and Chemiluminescence

  • ASTM D5504-01 : Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

  • ASTM D550-41 : Methods of Testing Glass Spool Insulators (Withdrawn 1957)

  • ASTM D5505 : Practice for Classifying Emulsified Recycling Agents

  • ASTM D5505-97R01 : Practice for Classifying Emulsified Recycling Agents

  • ASTM D5506-98R03 : Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials

  • ASTM D5507 : Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chlorideby Capillary Column/Multidimensional Gas Chromatography

  • ASTM D5507-99 : Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

  • ASTM D5508 : Test Method for Determination of Residual Acrylonitrile Monomer in Styrene AcrylonitrileCopolymer Resins and Nitrile Butadiene Rubber by Headspace Capillary Gas Chromatography (HSCGC)

  • ASTM D5508-94AR01E01 : Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

  • ASTM D5509 : Practice for Exposing Plastics to a Simulated Compost Environment

  • ASTM D5509-96 : Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002)

  • ASTM D5510 : Practice for Heat Aging of Oxidatively Degradable Plastics

  • ASTM D5510-94R01 : Practice for Heat Aging of Oxidatively Degradable Plastics

  • ASTM D5511 : Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under HighSolids Anaerobic Digestion Conditions

  • ASTM D5511-02 : Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

  • ASTM D5512 : Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor

  • ASTM D5512-96 : Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002)

  • ASTM D5513 : Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for TraceElement Analysis

  • ASTM D5513-99R04 : Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis

  • ASTM D5514 : Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

  • ASTM D551-41 : Method of Measuring Shrinkage from Mold Dimensions of Molded Materials Used for Electrical Insulation (Withdrawn 1965)

  • ASTM D5514-94R01 : Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

  • ASTM D5515 : Test Method for Determination of the Swelling Properties of Bituminous Coal Using aDilatometer

  • ASTM D5515-97R04E01 : Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer

  • ASTM D5516 : Test Method for Evaluating the Flexural Properties of Fire Retardant Treated SoftwoodPlywood Exposed to Elevated Temperatures

  • ASTM D5516-03 : Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

  • ASTM D5517 : Test Method for Determining Extractability of Metals from Art Materials

  • ASTM D5517-03 : Test Method for Determining Extractability of Metals from Art Materials

  • ASTM D5518 : Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions

  • ASTM D5518-94e1 : Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions (Withdrawn 2003)

  • ASTM D5519 : Test Method for Particle Size Analysis of Natural and Man Made Riprap Materials

  • ASTM D5519-94R01 : Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials

  • ASTM D5520 : Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples byUniaxial Compression

  • ASTM D5520-94R01 : Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

  • ASTM D5521 : Guide for Development of Ground Water Monitoring Wells in Granular Aquifers

  • ASTM D5521-94e1 : Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers (Withdrawn 2003)

  • ASTM D5522 : Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid

  • ASTM D5522-99a : Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid (Withdrawn 2004)

  • ASTM D5523 : Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination ofHydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

  • ASTM D5523-04 : Test Method for Polyurethane Raw Materials : Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

  • ASTM D5524 : Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene UsingLiquid Chromatography

  • ASTM D552-46 : Test for Cellular Rubber Products (Withdrawn 1949)

  • ASTM D5524-94R01E01 : Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography

  • ASTM D5525 : Practice for Exposing Plastics to a Simulated Active Landfill Environment

  • ASTM D55-25 : Test Method for Specific Gravity and Absorption of Fine Aggregate (Withdrawn 1936)

  • ASTM D5525-94a : Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002)

  • ASTM D5526 : Test Method for Determining Anaerobic Biodegradation of Plastic Materials UnderAccelerated Landfill Conditions

  • ASTM D5526-94R02 : Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

  • ASTM D5527 : Practices for Measuring Surface Wind and Temperature by Acoustic Means

  • ASTM D5527-00R02E01 : Practices for Measuring Surface Wind and Temperature by Acoustic Means

  • ASTM D5528 : Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber ReinforcedPolymer Matrix Composites

  • ASTM D5528-01 : Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

  • ASTM D553- : Methods of Test for Viscosity and Total Solids Content of Rubber Cements (Withdrawn 1965)

  • ASTM D5530 : Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry

  • ASTM D5530-94R03 : Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry

  • ASTM D5531 : Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Colorand Geometric Appearance of Coatings

  • ASTM D5531-05 : Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

  • ASTM D5532 : Specification for Micaceous Iron Oxide Pigments for Paint (Withdrawn 2004) NoReplacement

  • ASTM D5532-94(1999) : Specification for Micaceous Iron Oxide Pigments for Paint (Withdrawn 2004)

  • ASTM D5533 : Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine

  • ASTM D5533-98e1 : Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine (Withdrawn 2003)

  • ASTM D5534 : Test Method for Vapor Phase Rust Preventing Characteristics of Hydraulic Fluids

  • ASTM D5534-94R99 : Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

  • ASTM D5535 : Termninology Relating to Formed in Place Sealants for Joints and Cracks in Pavements

  • ASTM D5535-98R03 : Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements

  • ASTM D5536 : Practice for Sampling Forest Trees for Determination of Clear Wood Properties

  • ASTM D5536-94R04 : Practice for Sampling Forest Trees for Determination of Clear Wood Properties

  • ASTM D5537-03 : Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

  • ASTM D5538 : Practice for Thermoplastic Elastomers/Terminology and Abbreviations

  • ASTM D5538-02 : Practice for Thermoplastic Elastomers\MTerminology and Abbreviations

  • ASTM D5539 : Specification for Seed Starter Mix

  • ASTM D5539-94R03 : Specification for Seed Starter Mix

  • ASTM D5540 : Practice for Flow Control and Temperature Control for On Line Water Sampling and Analysis

  • ASTM D5540-94AR03 : Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis

  • ASTM D5541 : Practice for Developing a Stage Discharge Relation for Open Channel Flow

  • ASTM D5541-94R03 : Practice for Developing a Stage-Discharge Relation for Open Channel Flow

  • ASTM D5542 : Test Methods for Trace Anions in High Purity Water by Ion Chromatography

  • ASTM D5542-04 : Test Methods for Trace Anions in High Purity Water by Ion Chromatography

  • ASTM D5543-94R05 : Test Methods for Low-Level Dissolved Oxygen in Water

  • ASTM D5544 : Test Method for On Line Measurement of Residue After Evaporation of High Purity Water

  • ASTM D5544-05 : Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

  • ASTM D5545-94e1 : Test Method for Identification of Cationic Slow-Set Emulsified Asphalts (Withdrawn 1998)

  • ASTM D5546 : Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

  • ASTM D5546-01 : Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

  • ASTM D5547 : Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption

  • ASTM D554-72(1976) : Specification for Amylacetate Made from Fusel Oil (85 to 88 Percent Grade) (Withdrawn 1981)

  • ASTM D5547-95R03 : Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption

  • ASTM D5548 : Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering

  • ASTM D5548-05 : Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering

  • ASTM D5549 : Guide for The Contents of Geostatistical Site Investigation Report

  • ASTM D5549-94e1 : Guide for the Contents of Geostatistical Site Investigation Report (Withdrawn 2003)

  • ASTM D555 : Guide for Testing Drying Oils

  • ASTM D5550 : Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

  • ASTM D5550-00 : Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

  • ASTM D5551 : Test Method for Determination of the Cloud Point of Oil

  • ASTM D5551-95R01 : Test Method for Determination of the Cloud Point of Oil

  • ASTM D5552 : Test Method for Resistance of Colored Leather to Bleeding

  • ASTM D5552-00 : Test Method for Resistance of Colored Leather to Bleeding

  • ASTM D5553 : Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils

  • ASTM D5553-95R01 : Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils

  • ASTM D5554 : Test Method for Determination of the Iodine Value of Fats and Oils

  • ASTM D5554-95R01 : Test Method for Determination of the Iodine Value of Fats and Oils

  • ASTM D5555 : Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, andVegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds

  • ASTM D5555-95R01 : Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds

  • ASTM D5556 : Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats

  • ASTM D5556-95R01E01 : Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds

  • ASTM D5557 : Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used inFat Liquors and Stuffing Compounds

  • ASTM D5557-95R01 : Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds

  • ASTM D5558 : Test Method for Determination of the Saponification Value of Fats and Oils

  • ASTM D5558-95R01 : Test Method for Determination of the Saponification Value of Fats and Oils

  • ASTM D5559 : Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence ofAmmonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils

  • ASTM D5559-95R01 : Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils

  • ASTM D556- : Specification for Materials for Soil-Aggregate Subbase, Base and Surface Courses (Withdrawn 1952)

  • ASTM D5560 : Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils

  • ASTM D5560-95R01 : Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils

  • ASTM D5562 : Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in thePresence of Ammonium or Triethanolamine Soaps

  • ASTM D5562-95R01 : Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps

  • ASTM D5563-94 : Test Method for the Determination of the Total Alkalinity of Sulfonated or Sulfated Oils (Withdrawn 1995)

  • ASTM D5564 : Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils

  • ASTM D5564-95R01 : Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils

  • ASTM D5565 : Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils

  • ASTM D5565-95R01 : Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils

  • ASTM D5566 : Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils

  • ASTM D5566-95R01 : Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils

  • ASTM D5567 : Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

  • ASTM D5567-94R01 : Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

  • ASTM D5568 : Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeabilityof Solid Materials at Microwave Frequencies

  • ASTM D5568-01 : Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies

  • ASTM D5569 : Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements

  • ASTM D5569-94 : Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements (Withdrawn 2002)

  • ASTM D557- : Specification for Materials for Soil-Aggregate Subbase, Base and Surface Courses (Withdrawn 1952)

  • ASTM D5570 : Test Method for Water Resistance of Tape and Adhesives Used as Box Closure

  • ASTM D5570-94R99 : Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure

  • ASTM D5571 : Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead DrumsNot Exceeding 60 Gal (227 L) in Rated Capacity

  • ASTM D5571-94R01E01 : Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity

  • ASTM D5572 : Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

  • ASTM D5572-95R05 : Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

  • ASTM D5573 : Practice for Classifying Failure Modes in Fiber Reinforced Plastic (FRP) Joints

  • ASTM D5573-99R05 : Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

  • ASTM D5574 : Test Methods for Establishing Allowable Mechanical Properties of Wood Bonding Adhesivesfor Design of Structural Joints

  • ASTM D5574-94R05 : Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

  • ASTM D5575-99R03 : Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

  • ASTM D5576 : Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers byInfrared Spectroscopy (FT IR)

  • ASTM D5576-00 : Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

  • ASTM D5577 : Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

  • ASTM D5577-94R03 : Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

  • ASTM D5578 : Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBrDerivatization Method)

  • ASTM D5578-04 : Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)

  • ASTM D5579 : Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in aCyclic Durability Test

  • ASTM D5579-04 : Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

  • ASTM D558 : Test Methods for Moisture Density (Unit Weight) Relations of Soil Cement Mixtures

  • ASTM D5580 : Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m Xylene, o Xylene,

  • ASTM D5580-02 : Test Method for Determination of Benzene, Toluene, Ethylbenzene, -Xylene, -Xylene, C and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

  • ASTM D5581 : Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus(6 inch Diameter Specimen)

  • ASTM D5581-96R01 : Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

  • ASTM D5582 : Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

  • ASTM D5582-00 : Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

  • ASTM D5583 : Test Method for Detection and Estimation of Retention of Wood Preservatives by AspergillusBioassaying

  • ASTM D5583-00 : Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying

  • ASTM D5584 : Test Methods for Chemical Analysis of Ammoniacal Copper Quat, Type B (ACQ B)

  • ASTM D5584-94R00 : Test Methods for Chemical Analysis of Ammoniacal Copper Quat, Type B (ACQ-B)

  • ASTM D5585 : Table of Body Measurements for Adult Female Misses Figure Type, Sizes 2 20

  • ASTM D5585-95R01 : Table of Body Measurements for Adult Female Misses Figure Type, Sizes 2\N20

  • ASTM D5586 : Tables of Body Measurements for Women Aged 55 and Older (All Figure Types)

  • ASTM D5586-01 : Tables of Body Measurements for Women Aged 55 and Older (All Figure Types)

  • ASTM D5586D5586M : Tablesof Body Measurements for Women Aged 55 and Older(All Figure Types)1,2

  • ASTM D5587 : Test Method for Tearing Strength of Fabrics by Trapezoid Procedure

  • ASTM D5587-05 : Test Method for Tearing Strength of Fabrics by Trapezoid Procedure

  • ASTM D5588 : Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, andPlant Areas

  • ASTM D5588-97R02 : Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas

  • ASTM D5589 : Test Method for Determining the Resistance of Paint Films and Related Coatings to AlgalDefacement

  • ASTM D5589-97R02 : Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement

  • ASTM D559 : Test Methods for Wetting and Drying Compacted Soil Cement Mixtures

  • ASTM D5590 : Test Method for Determining the Resistance of Paint Films and Related Coatings to FungalDefacement by Accelerated Four Week Agar Plate Assay

  • ASTM D5590-00 : Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay

  • ASTM D5591 : Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage ForceTester

  • ASTM D5591-04 : Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester

  • ASTM D5592 : Guide for Material Properties Needed in Engineering Design Using Plastics

  • ASTM D5592-94R02E01 : Guide for Material Properties Needed in Engineering Design Using Plastics

  • ASTM D5593 : Classification for Thermoplastic Elastomers Olefinic (TEO) (Withdrawn 2005) NoReplacement

  • ASTM D5593-99E01 : Classification for Thermoplastic Elastomers\MOlefinic (TEO)

  • ASTM D5593-99e1 : Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)

  • ASTM D5594 : Test Method for Determination of the Vinyl Acetate Content of Ethylene Vinyl Acetate (EVA)

  • ASTM D5594-98R04 : Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

  • ASTM D5595-94 : Practice for Determining Buoyancy Corrections During Precision Weighing of Low-Density Samples (Withdrawn 1997)

  • ASTM D5596 : Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in PolyolefinGeosynthetics

  • ASTM D5596-03 : Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

  • ASTM D5597-94 : Practice for the Preparation of Oil-Based Ink Resin Solutions Using a Hot Oil Bath (Withdrawn 1999)

  • ASTM D5598 : Test Method for Evaluating Unleaded Automotive Spark Ignition Engine Fuel for ElectronicPort Fuel Injector Fouling

  • ASTM D5598-01 : Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

  • ASTM D5599 : Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography andOxygen Selective Flame Ionization Detection

  • ASTM D5599-00 : Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

  • ASTM D560 : Test Methods for Freezing and Thawing Compacted Soil Cement Mixtures

  • ASTM D5600 : Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma AtomicEmission Spectrometry (ICP AES)

  • ASTM D5600-04 : Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

  • ASTM D5601 : Test Method for Tearing Resistance of Roofing and Waterproofing Materials and MembranesNo Replacement

  • ASTM D5601-94 : Test Method for Tearing Resistance of Roofing and Waterproofing Materials and Membranes

  • ASTM D5602 : Test Method for Static Puncture Resistance of Roofing Membrane Specimens

  • ASTM D5602-98 : Test Method for Static Puncture Resistance of Roofing Membrane Specimens

  • ASTM D5603 : Classification for Rubber Compounding Materials/Recycled Vulcanizate Particulate Rubber

  • ASTM D5603-01 : Classification for Rubber Compounding Materials\MRecycled Vulcanizate Particulate Rubber

  • ASTM D5604 : Test Methods for Precipitated Silica/Surface Area by Single Point B.E.T. Nitrogen Adsorption

  • ASTM D5604-96R01 : Test Methods for Precipitated Silica\MSurface Area by Single Point B.E.T. Nitrogen Adsorption

  • ASTM D5605 : Practice for Styrene Butadiene Rubber (SBR)/Establishing Raw Mooney Viscosity TargetValues

  • ASTM D5605-94R02 : Practice for Styrene-Butadiene Rubber (SBR)\MEstablishing Raw Mooney Viscosity Target Values

  • ASTM D5606 : Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

  • ASTM D5606-01 : Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

  • ASTM D5607 : Test Method for Performing Laboratory Direct Shear Strength Tests of Rock SpecimensUnder Constant Normal Force

  • ASTM D5607-02 : Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

  • ASTM D5608 : Practice for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

  • ASTM D5608-01 : Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

  • ASTM D5609 : Guide for Defining Boundary Conditions in Ground Water Flow Modeling

  • ASTM D5609-94R02 : Guide for Defining Boundary Conditions in Ground-Water Flow Modeling

  • ASTM D561 : Specification for Carbon Black Pigment for Paint

  • ASTM D5610 : Guide for Defining Initial Conditions in Ground Water Flow Modeling

  • ASTM D5610-94R02 : Guide for Defining Initial Conditions in Ground-Water Flow Modeling

  • ASTM D5611 : Guide for Conducting a Sensitivity Analysis for a Ground Water Flow Model Application

  • ASTM D5611-94R02 : Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application

  • ASTM D5612 : Guide for Quality Planning and Field Implementation of a Water Quality MeasurementProgram

  • ASTM D5612-94R03 : Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program

  • ASTM D5613 : Test Method for Open Channel Measurement of Time of Travel Using Dye Tracers

  • ASTM D5613-94R03 : Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers

  • ASTM D5614 : Test Method for Open Channel Flow Measurement of Water with Broad Crested Weirs

  • ASTM D5614-94R03 : Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs

  • ASTM D5615 : Test Method for Operating Characteristics of Home Reverse Osmosis Devices

  • ASTM D5615-95R01 : Test Method for Operating Characteristics of Home Reverse Osmosis Devices

  • ASTM D5616 : Specification for Reclaimed Trichloroethylene

  • ASTM D5616-04 : Specification for Reclaimed Trichloroethylene

  • ASTM D5617 : Test Method for Multi Axial Tension Test for Geosynthetics

  • ASTM D5617-04 : Test Method for Multi-Axial Tension Test for Geosynthetics

  • ASTM D5618 : Test Method for Measurement of Barnacle Adhesion Strength in Shear

  • ASTM D5618-94R05 : Test Method for Measurement of Barnacle Adhesion Strength in Shear

  • ASTM D5619 : Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

  • ASTM D5619-00 : Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

  • ASTM D562 : Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a StormerType Viscometer

  • ASTM D5620 : Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pinand Vee Block Test Machine

  • ASTM D5620-94R04 : Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine

  • ASTM D5621-01 : Test Method for Sonic Shear Stability of Hydraulic Fluids

  • ASTM D5622 : Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels byReductive Pyrolysis

  • ASTM D5622-95R00 : Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

  • ASTM D5623 : Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography andSulfur Selective Detection

  • ASTM D5623-94R04E01 : Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

  • ASTM D5624 : Test Method for Determining the Transverse Aggregate Spread Rate for Surface TreatmentApplications

  • ASTM D5624-02 : Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

  • ASTM D5625 : Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and PaperProducts

  • ASTM D5625-97R02 : Test Method for Measuring Length, Width, and Squareness of Sheeted Paper and Paper Products

  • ASTM D5626 : Test Methods for U.S. Postal Service Optical Measurements for Small Areas

  • ASTM D5626-94R01 : Test Methods for U.S. Postal Service Optical Measurements for Small Areas

  • ASTM D5627 : Test Method for Water Extractable Residue from Particulate Ion Exchange Resins

  • ASTM D5627-94R04 : Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins

  • ASTM D5628 : Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a FallingDart (Tup or Falling Mass)

  • ASTM D5628-96R01E01 : Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

  • ASTM D5629 : Test Method for Polyurethane Raw Materials Determination of Acidity in Low AcidityAromatic Isocyanates and Polyurethane Prepolymers

  • ASTM D5629-05 : Test Method for Polyurethane Raw Materials : Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

  • ASTM D563 : Test Method for Phthalic Anhydride Content of Alkyd Resins and Resin Solutions (Withdrawn2004) No Replacement

  • ASTM D5630-01 : Test Method for Ash Content in Plastics

  • ASTM D5631 : Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane(CF3BR)

  • ASTM D5631-00 : Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CFBR)

  • ASTM D5632-01 : Specification for Halon 1301, Bromotrifluoromethane (CFBr)

  • ASTM D5633 : Practice for Sampling with a Scoop

  • ASTM D5633-04 : Practice for Sampling with a Scoop

  • ASTM D5634 : Guide for Selection of Permanent and Durable Offset and Book Papers

  • ASTM D5634-01 : Guide for Selection of Permanent and Durable Offset and Book Papers

  • ASTM D5635 : Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

  • ASTM D5635-04A : Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

  • ASTM D5636 : Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and WaterproofingMaterials

  • ASTM D5636-94R99E01 : Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

  • ASTM D5637 : Test Method for Moisture Resistance of Electrical Insulating Varnishes

  • ASTM D5637-04 : Test Method for Moisture Resistance of Electrical Insulating Varnishes

  • ASTM D5638 : Test Method for Chemical Resistance of Electrical Insulating Varnishes

  • ASTM D5638-00 : Test Method for Chemical Resistance of Electrical Insulating Varnishes

  • ASTM D563-88(1996)e1 : Test Method for Phthalic Anhydride Content of Alkyd Resins and Resin Solutions (Withdrawn 2004)

  • ASTM D5639/D5639M : Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based onPerformance Requirements

  • ASTM D5639/D5639M-95R00E01 : Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

  • ASTM D564 : Test Methods for Liquid Paint Driers

  • ASTM D5640 : Guide for Selection of Weirs and Flumes for Open Channel Flow Measurement of Water

  • ASTM D5640-95R03 : Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water

  • ASTM D5641 : Practice for Geomembrane Seam Evaluation by Vacuum Chamber

  • ASTM D5641-94R01E01 : Practice for Geomembrane Seam Evaluation by Vacuum Chamber

  • ASTM D5642-99R04 : Test Method for Sealed Tube Chemical Compatibility Test

  • ASTM D5643 : Specification for Coal Tar Roof Cement, Asbestos Free

  • ASTM D5643-94R00E01 : Specification for Coal Tar Roof Cement, Asbestos Free

  • ASTM D5644 : Test Methods for Rubber Compounding Materials/Determination of Particle Size Distributionof Recylced Vulcanizate Particulate Rubber

  • ASTM D5644-01 : Test Methods for Rubber Compounding Materials\MDetermination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

  • ASTM D5645-95A : Test Methods for Determining Physical Properties of Inflatable Restraint Cushions (Withdrawn 1999)

  • ASTM D5646 : Terminology of Basic Sewing Machine Stitches for Home Use

  • ASTM D5646-96R02 : Terminology of Basic Sewing Machine Stitches for Home Use

  • ASTM D5647 : Guide for Measuring Hairiness of Yarns by the Photo Electric Apparatus

  • ASTM D5647-01 : Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus

  • ASTM D5648 : Test Method for Torque Tension Relationship of Adhesives Used on Threaded Fasteners(Lubricity)

  • ASTM D5648-01 : Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)

  • ASTM D5649 : Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

  • ASTM D5649-01 : Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

  • ASTM D565 : Test Method for Carbonizable Substances in White Mineral Oil

  • ASTM D5650 : Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber TypeTester in 0 to 10 Taber Stiffness Unit Configuration)

  • ASTM D5650-97R02 : Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration)

  • ASTM D5651 : Test Method for Surface Bond Strength of Wood Base Fiber and Particle Panel Materials

  • ASTM D5651-95AR02 : Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

  • ASTM D5652 : Test Methods for Bolted Connections in Wood and Wood Base Products

  • ASTM D5652-95R00 : Test Methods for Bolted Connections in Wood and Wood-Based Products

  • ASTM D5653 : Specification for Copper Dimethyldithiocarbamate

  • ASTM D5653-95R00 : Specification for Copper Dimethyldithiocarbamate

  • ASTM D5654-95R00 : Specification for Ammoniacal Copper Quat Type B (ACQ-B) 1

  • ASTM D5655-95R00 : Test Method for Analysis of Copper Dimethyldithiocarbamate (CDDC) Treated Wood by Colorimetry 1

  • ASTM D5656 : Test Method for Thick Adherend Metal Lap Shear Joints for Determination of the StressStrain Behavior of Adhesives in Shear by Tension Loading

  • ASTM D5656-04 : Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

  • ASTM D5657 : Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

  • ASTM D5657-01 : Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

  • ASTM D5658 : Practice for Sampling Unconsolidated Waste From Trucks

  • ASTM D5658-95R01 : Practice for Sampling Unconsolidated Waste From Trucks

  • ASTM D5659 : Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC

  • ASTM D5659-95R01 : Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC

  • ASTM D566 : Test Method for Dropping Point of Lubricating Grease

  • ASTM D5660 : Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Waterand Soil Using a Toxicity Test with a Luminescent Marine Bacterium

  • ASTM D5660-96R04 : Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium

  • ASTM D5661 : Test Method for Relative Solvency of Petroleum Oils by the PKP Method

  • ASTM D5661-95R01 : Test Method for Relative Solvency of Petroleum Oils by the PKP Method

  • ASTM D5662 : Test Method for Determining Automotive Gear Oil Compatability with Typical Oil SealElastomers

  • ASTM D5662-99 : Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers

  • ASTM D5663 : Guide for Validating Recycled Content in Packaging Paper and Paperboard

  • ASTM D5663-97R03 : Guide for Validating Recycled Content in Packaging Paper and Paperboard

  • ASTM D5664 : Test Method for Evaluating the Effects of Fire Retardant Treatments and ElevatedTemperatures on Strength Properties of Fire Retardant Treated Lumber

  • ASTM D5664-02 : Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

  • ASTM D5665 : Specification for Thermoplastic Fabrics Used in Cold Applied Roofing and Waterproofing

  • ASTM D5665-99A : Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

  • ASTM D5666 : Test Method for P Phenylenediamine Antidegradants Purity by High Performance LiquidChromatography

  • ASTM D5666-95R04E01 : Test Method for Rubber Chemical Antidegradants\MPurity of -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography

  • ASTM D5667 : Test Method for Rubber From Synthetic Sources Total and Water Soluble Ash

  • ASTM D5667-95R05 : Test Method for Rubber From Synthetic Sources\MTotal and Water Soluble Ash

  • ASTM D5668 : Test Methods for Rubber From Synthetic Sources Volatile Matter

  • ASTM D5668-99R03 : Test Methods for Rubber From Synthetic Sources\MVolatile Matter

  • ASTM D5669-95 : Test Method for Rubber-Evaluation of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Curemeter Testing (Withdrawn 2000)

  • ASTM D5670 : Test Method for Rubber Determination of Residual Unsaturation in Hydrogenated NitrileRubber (HNBR) by Infrared Spectrophotometry

  • ASTM D5670-95R04E01 : Test Method for Rubber\MDetermination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

  • ASTM D5671 : Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light

  • ASTM D5671-95R01 : Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light

  • ASTM D5672 : Test Method for Testing Flexible Cellular Materials Measurement of Indentation ForceDeflection Using a 25 mm (1 in.) Deflection Technique

  • ASTM D5672-03 : Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique

  • ASTM D5673 : Test Method for Elements in Water by Inductively Coupled Plasma Mass Spectrometry

  • ASTM D5673-03 : Test Method for Elements in Water by Inductively Coupled Plasma\MMass Spectrometry

  • ASTM D5674 : Guide for Operation of a Gaging Station

  • ASTM D5674-95R03 : Guide for Operation of a Gaging Station

  • ASTM D5675 : Specification for Fluoropolymer Micropowders

  • ASTM D5675-04 : Classification for Fluoropolymer Micropowders

  • ASTM D567-53(1955) : Method for Calculating Viscosity Index (Withdrawn 1966)

  • ASTM D5676 : Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004) NoReplacement

  • ASTM D5676-99 : Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)

  • ASTM D5677 : Specification for Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe and PipeFittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

  • ASTM D5677-00 : Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

  • ASTM D5678 : Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

  • ASTM D5678-95R02 : Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

  • ASTM D5679 : Practice for Sampling Consolidated Solids in Drums or Similar Containers

  • ASTM D5679-95AR01 : Practice for Sampling Consolidated Solids in Drums or Similar Containers

  • ASTM D5680 : Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

  • ASTM D5680-95AR01 : Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

  • ASTM D5681 : SStandard Termninology for Waste and Waste Management

  • ASTM D5681-98AR04 : Terminology for Waste and Waste Management

  • ASTM D5682 : Test Methods for Electrical Resistivity of Liquid Paint and Related Materials

  • ASTM D5682-95R02 : Test Methods for Electrical Resistivity of Liquid Paint and Related Materials

  • ASTM D5683 : Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

  • ASTM D5683-95R99E01 : Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

  • ASTM D5684-04A : Terminology Relating to Pile Floor Coverings

  • ASTM D5685-02 : Specification for |P`Fiberglass|P’ (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

  • ASTM D5686 : Specification for |P`Fiberglass|P’(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines

  • ASTM D5686-95 : Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines (Withdrawn 2002)

  • ASTM D5687/D5687M : Guide for Preparation of Flat Composite Panels with Processing Guidelines for SpecimenPreparation

  • ASTM D5687/D5687M-95R02 : Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation

  • ASTM D568-77(1985) : Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position (Withdrawn 1991)

  • ASTM D569-90 : Method for Measuring the Flow Properties of Thermoplastic Molding Materials (Withdrawn 1995)

  • ASTM D570 : Test Method for Water Absorption of Plastics

  • ASTM D5702 : Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

  • ASTM D5702-02 : Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

  • ASTM D5703 : Practice for Preparatory Surface Cleaning for Clay Brick Masonry

  • ASTM D5703-95R01 : Practice for Preparatory Surface Cleaning for Clay Brick Masonry

  • ASTM D5704 : Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Usedfor Manual Transmissions and Final Drive Axles

  • ASTM D5704-04A : Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

  • ASTM D5705-03 : Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

  • ASTM D5706 : Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using AHigh Frequency, Linear Oscillation (SRV) Test Machine

  • ASTM D5706-97R02E01 : Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine

  • ASTM D5707 : Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a HighFrequency, Linear Oscillation (SRV) Test Machine

  • ASTM D5707-98R03E01 : Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

  • ASTM D5708 : Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and ResidualFuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

  • ASTM D5708-02 : Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

  • ASTM D5709 : Test Method for Sieve Analysis of Petroleum Coke

  • ASTM D5709-95R00E01 : Test Method for Sieve Analysis of Petroleum Coke

  • ASTM D5710 : Specification for Trinidad Lake Modified Asphalt

  • ASTM D5710-03 : Specification for Trinidad Lake Modified Asphalt

  • ASTM D5711 : Test Method for Determining the Adherent Coating on Coarse Aggregates

  • ASTM D5711-03 : Test Method for Determining the Adherent Coating on Coarse Aggregates

  • ASTM D5712 : Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its ProductsUsing the Modified Lowry Method

  • ASTM D5712-99E01 : Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

  • ASTM D5713 : Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary GasChromatography

  • ASTM D5713-05 : Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

  • ASTM D5714 : Specification for Content of Digital Geospatial Metadata

  • ASTM D5714-95R02 : Specification for Content of Digital Geospatial Metadata

  • ASTM D5715 : Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils(Visual/Manual Method)

  • ASTM D5715-00 : Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)

  • ASTM D5716 : Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

  • ASTM D5716-95R00 : Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

  • ASTM D5717 : Guide for Design of Ground Water Monitoring Systems in Karst and Fractured Rock Aquifers(Withdrawn 2005) No Replacement

  • ASTM D571-76 : Methods of Testing Rubber Hose for Automotive Hydraulic Brake System (Withdrawn 1981)

  • ASTM D5717-95E01 : Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers

  • ASTM D5717-95e1 : Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers (Withdrawn 2005)

  • ASTM D5718 : Guide for Documenting a Ground Water Flow Model Application

  • ASTM D5718-95R00 : Guide for Documenting a Ground-Water Flow Model Application

  • ASTM D5719-95R00 : Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes

  • ASTM D572 : Test Method for Rubber/Deterioration by Heat and Oxygen

  • ASTM D57-20 : Specification for Materials for Cement Grout Filler for Brick and Stone Block Pavements (Withdrawn 1962)

  • ASTM D5720 : Practice for Static Calibration of Electronic Transducer Based Pressure Measurement Systems for Geotechnical Purposes

  • ASTM D5720-95R02 : Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes

  • ASTM D5721 : Practice for Air Oven Aging of Polyolefin Geomembranes

  • ASTM D5721-95R02 : Practice for Air-Oven Aging of Polyolefin Geomembranes

  • ASTM D5722 : Practice for Performing Accelerated Outdoor Weathering of Factory Coated EmbossedHardboard Using Concentrated Natural Sunlight and a Soak Freeze Thaw Procedure

  • ASTM D5722-03 : Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure

  • ASTM D5723 : Practice for Determination of Chromium Treatment Weight on Metal Substrates by X RayFluorescence

  • ASTM D5723-95R02 : Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

  • ASTM D5724 : Specification for Gouache Paints

  • ASTM D5724-05 : Specification for Gouache Paints

  • ASTM D5725 : Test Method for Surface Wettability and Absorbency of Sheeted Materials Using anAutomated Contact Angle Tester

  • ASTM D5725-99R03 : Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester

  • ASTM D5726 : Specification for Thermoplastic Fabrics Used in Hot Applied Roofing and Waterproofing

  • ASTM D5726-98 : Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

  • ASTM D5727 : Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

  • ASTM D5727-00R04E01 : Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

  • ASTM D5728 : Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

  • ASTM D5728-00 : Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

  • ASTM D5729 : Test Method for Thickness of Nonwoven Fabrics

  • ASTM D5729-97R04 : Test Method for Thickness of Nonwoven Fabrics

  • ASTM D573 : Test Method for Rubber/Deterioration in an Air Oven

  • ASTM D5730 : Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, theVadose Zone and Ground Water

  • ASTM D5730-04 : Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Ground Water

  • ASTM D5731 : Test Method for Determination of the Point Load Strength Index of Rock

  • ASTM D5731-02 : Test Method for Determination of the Point Load Strength Index of Rock

  • ASTM D5732 : Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test

  • ASTM D5732-95R01 : Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test

  • ASTM D5733 : Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure

  • ASTM D5733-99 : Test Method for Tearing Strength of Nonwoven Fabrics by the Trapezoid Procedure

  • ASTM D5734 : Test Method for Tearing Strength of Nonwoven Fabrics by Falling Pendulum (Elmendorf) Apparatus

  • ASTM D5734-95R01 : Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus

  • ASTM D5735 : Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip)

  • ASTM D5735-95R01 : Test Method for Tearing Strength on Nonwoven Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

  • ASTM D5736 : Test Method for Thickness of Highloft Nonwoven Fabrics

  • ASTM D5736-95R01 : Test Method for Thickness of Highloft Nonwoven Fabrics

  • ASTM D5737 : Guide for Methods for Measuring Well Discharge

  • ASTM D5737-95R00 : Guide for Methods for Measuring Well Discharge

  • ASTM D5738 : Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions andTrace Elements Diagrams for Single Analyses

  • ASTM D5738-95R00 : Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MDiagrams for Single Analyses

  • ASTM D5739 : Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion ElectronImpact Low Resolution Mass Spectrometry

  • ASTM D5739-00 : Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry

  • ASTM D5740 : Guide for Writing Material Standards in the Classification D4000 Format

  • ASTM D5740-03 : Guide for Writing Material Standards in the Classification D 4000 Format

  • ASTM D5741 : Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer

  • ASTM D5741-96R02E01 : Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer

  • ASTM D5742 : Test Method for Determination of Butane Activity of Activated Carbon

  • ASTM D5742-95R00 : Test Method for Determination of the Butane Activity of Activated Carbon

  • ASTM D5743 : Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums orSimilar Containers

  • ASTM D5743-97R03 : Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers

  • ASTM D5744 : Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell

  • ASTM D5744-96R01 : Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell

  • ASTM D5745 : Guide for Developing and Implementing Short Term Measures or Early Actions for SiteRemediation

  • ASTM D5745-95R05 : Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation

  • ASTM D5746-98R02 : Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities

  • ASTM D5747 : Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

  • ASTM D574-79 : Specification for Ozone-Resisting Insulation for Wire and Cable (Withdrawn 1983)

  • ASTM D5747-95AR02 : Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

  • ASTM D5748 : Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

  • ASTM D5748-95R01 : Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

  • ASTM D5749 : Specification for Reinforced and Plain Gummed Tape for Sealing and Securing

  • ASTM D5749-01 : Specification for Reinforced and Plain Gummed Tape for Sealing and Securing

  • ASTM D575 : Test Methods for Rubber Properties in Compression

  • ASTM D5750/D5750M : Guide for Width and Length of Pressure Sensitive Tape

  • ASTM D5750/D5750M-95R01 : Guide for Width and Length of Pressure-Sensitive Tape

  • ASTM D5751 : Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

  • ASTM D5751-99R05 : Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

  • ASTM D5752 : Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants forHeavy Duty Engines

  • ASTM D5752-04A : Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

  • ASTM D5753 : Guide for Planning and Conducting Borehole Geophysical Logging

  • ASTM D5753-95e1 : Guide for Planning and Conducting Borehole Geophysical Logging (Withdrawn 2005)

  • ASTM D5754 : Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions andTrace Elements Trilinear Diagrams for Two or More Analyses

  • ASTM D5754-95R00 : Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MTrilinear Diagrams for Two or More Analyses

  • ASTM D5755 : Test Method for Microvacuum Sampling and Indirect Analysis of Dust by TransmissionElectron Microscopy for Asbestos Structure Number Surface Loading

  • ASTM D5755-03 : Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading

  • ASTM D5756 : Test Method for Microvacuum Sampling and Indirect Analysis of Dust by TransmissionElectron Microscopy for Asbestos Mass Concentration

  • ASTM D5756-02 : Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading

  • ASTM D5757 : Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

  • ASTM D5757-00 : Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

  • ASTM D5758 : Test Method for Determination of Relative Crystallinity of Zeolite ZSM 5 by X Ray Diffraction

  • ASTM D5758-01 : Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

  • ASTM D5759 : Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for PotentialUses

  • ASTM D5759-95R05 : Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

  • ASTM D5760 : Specification for Performance of Manual Transmission Gear Lubricants

  • ASTM D5760-95E01 : Specification for Performance of Manual Transmission Gear Lubricants

  • ASTM D5761 : Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

  • ASTM D5761-96R01 : Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

  • ASTM D5762 : Test Method for Nitrogen in Petroleum and Petroleum Products by Boat InletChemiluminescence

  • ASTM D5762-02 : Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

  • ASTM D5763 : Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using UniversalGlassware

  • ASTM D5763-95R01 : Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

  • ASTM D5764 : Test Method for Evaluating Dowel Bearing Strength of Wood and Wood Base Products

  • ASTM D5764-97AR02 : Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products

  • ASTM D5765 : Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and SedimentsUsing Closed Vessel Microwave Heating

  • ASTM D5765-95R01 : Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating

  • ASTM D5766/D5766M : Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates

  • ASTM D5766/D5766M-02A : Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates

  • ASTM D5767 : Test Methods for Instrumental Measurement of Distinctness of Image Gloss of CoatingSurfaces

  • ASTM D5767-95R04 : Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces

  • ASTM D5768 : Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

  • ASTM D5768-02 : Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

  • ASTM D5769 : Test Method for Determination of Benzene, Toluene, and Total Aromatics in FinishedGasolines by Gas Chromatography/Mass Spectrometry

  • ASTM D5769-04 : Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

  • ASTM D5770 : Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating OilsDuring Oxidation Testing

  • ASTM D5770-02 : Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

  • ASTM D5771-04 : Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

  • ASTM D5772 : Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

  • ASTM D5772-04 : Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

  • ASTM D5773-04 : Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

  • ASTM D5774 : Test Methods for Rubber Chemical Analysis of Extractables

  • ASTM D5774-95R04E02 : Test Methods for Rubber\MChemical Analysis of Extractables

  • ASTM D5775 : Test Method for Rubber from Synthetic Sources Bound Styrene in SBR

  • ASTM D577-52(1955) : Methods of Testing Woven Asbestos Cloth (Withdrawn 1957)

  • ASTM D5775-95R04E01 : Test Method for Rubber\MDetermination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index

  • ASTM D5776 : Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

  • ASTM D5776-99 : Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

  • ASTM D5777 : Guide for Using the Seismic Refraction Method for Subsurface Investigation

  • ASTM D5777-00 : Guide for Using the Seismic Refraction Method for Subsurface Investigation

  • ASTM D5778-95R00 : Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils

  • ASTM D5779-95AR01 : Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control

  • ASTM D578 : Specification for Glass Fiber Strands

  • ASTM D5780 : Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

  • ASTM D5780-95R02 : Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

  • ASTM D5781 : Guide for Use of Dual Wall Reverse Circulation Drilling for Geoenvironmental Exploration andthe Installation of Subsurface Water Quality Monitoring Devices

  • ASTM D5781-95R00 : Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5782 : Guide for Use of Direct Air Rotary Drilling for Geoenvironmental Exploration and theInstallation of Subsurface Water Quality Monitoring Devices

  • ASTM D5782-95R00 : Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5783 : Guide for Use of Direct Rotary Drilling with Water Based Drilling Fluid for GeoenvironmentalExploration and the Installation of Subsurface Water Quality Monitoring Devices

  • ASTM D5783-95R00 : Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5784 : Guide for Use of Hollow Stem Augers for Geoenvironmental Exploration and the Installationof Subsurface Water Quality Monitoring Devices

  • ASTM D5784-95R00 : Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5785 : Test Method for (Analytical Procedure) for Determining Transmissivity of Confined NonleakyAquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

  • ASTM D5785-95R00 : Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

  • ASTM D5786 : Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells forDetermining Hydraulic Properties of Aquifer Systems

  • ASTM D5786-95R00 : Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

  • ASTM D5787 : Practice for Monitoring Well Protection

  • ASTM D5787-95R00 : Practice for Monitoring Well Protection

  • ASTM D5788 : Guide for Spiking Organics into Aqueous Samples

  • ASTM D5788-95R01 : Guide for Spiking Organics into Aqueous Samples

  • ASTM D5789 : Practice for Writing Quality Control Specifications for Test Methods for Organic Constituents

  • ASTM D5789-95 : Practice for Writing Quality Control Specifications for Test Methods for Organic Constituents (Withdrawn 2002)

  • ASTM D579 : Specification for Greige Woven Glass Fabrics

  • ASTM D5790 : Test Method for Measurement of Purgeable Organic Compounds in Water by CapillaryColumn Gas Chromatography/Mass Spectrometry

  • ASTM D5790-95R01 : Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry

  • ASTM D5791 : Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

  • ASTM D5791-95R01 : Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

  • ASTM D5792 : Practice for Generation of Environmental Data Related to Waste Management Activities :

  • ASTM D5792-02 : Practice for Generation of Environmental Data Related to Waste Management Activities : Development of Data Quality Objectives

  • ASTM D5793 : Test Method for Binding Sites Per Unit Length or Width of Pile Yarn Floor Coverings

  • ASTM D5793-05 : Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings

  • ASTM D5794 : Guide for Determination of Anions in Cathodic Electrocoat Permeates by IonChromatography

  • ASTM D5794-95R02 : Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography

  • ASTM D5795 : Test Method for Determination of Liquid Water Absorption of Coated Hardboard and OtherComposite Wood Products Via “Cobb Ring” Apparatus

  • ASTM D5795-95R00 : Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via|P`Cobb Ring|P’ Apparatus

  • ASTM D5796 : Test Method for Measurement of Dry Film Thickness of Thin Film Coil Coated Systems byDestructive Means Using a Boring Device

  • ASTM D5796-03 : Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device

  • ASTM D5797 : Specification for Fuel Methanol (M70 M85) for Automotive Spark Ignition Engines

  • ASTM D5797-96R01 : Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

  • ASTM D5798-99R04 : Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines

  • ASTM D5799 : Test Method for Determination of Peroxides in Butadiene

  • ASTM D5799-95R04 : Test Method for Determination of Peroxides in Butadiene

  • ASTM D580 : Specification for Greige Woven Glass Tapes and Webbings

  • ASTM D5800 : Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

  • ASTM D5800-04A : Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

  • ASTM D5801 : Test Method for Toughness and Tenacity of Bituminous Materials

  • ASTM D5801-95R01 : Test Method for Toughness and Tenacity of Bituminous Materials

  • ASTM D5802 : Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity UsingGravimetric Principles)

  • ASTM D5802-95R01 : Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)

  • ASTM D5803 : Test Method for Tensile Strength at Zero Span (“Wet Zero Span Tensile”)

  • ASTM D5803-97R02 : Test Method for Tensile Strength at Zero-Span (|P`Wet Zero-Span Tensile|P’)

  • ASTM D5804 : Test Methods for Zero Span Tensile Strength (“Dry Zero Span Tensile”)

  • ASTM D5804-97R02 : Test Methods for Zero-Span Tensile Strength (|P`Dry Zero-Span Tensile|P’)

  • ASTM D5805 : Test Method for Rubber from Synthetic Sources Carbon Black in Masterbatches

  • ASTM D5805-00R04E01 : Test Methods for Rubber\MDetermination of Carbon Black in Masterbatches

  • ASTM D5806 : Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

  • ASTM D5806-95R03 : Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

  • ASTM D5807 : Practice for Evaluating the Overpressurization Characteristics of Inflatable RestraintCushions

  • ASTM D5807-02A : Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions

  • ASTM D5808-03 : Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

  • ASTM D581 : Specification for Glass Fiber Greige Braided Tubular Sleeving

  • ASTM D5810 : Guide for Spiking into Aqueous Samples

  • ASTM D5810-96R01 : Guide for Spiking into Aqueous Samples

  • ASTM D5811-00 : Test Method for Strontium-90 in Water

  • ASTM D5812 : Test Method for Determination of Organochlorine Pesticides in Water by Capillary ColumnGas Chromatography

  • ASTM D5812-96R02E01 : Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography

  • ASTM D5813 : Specification for Cured In Place Thermosetting Resin Sewer Piping Systems

  • ASTM D5813-04 : Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

  • ASTM D5814 : Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET)

  • ASTM D5814-02 : Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

  • ASTM D5815 : Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives inLinear Low Density Polyethylene Using Liquid Chromatograph (LC)

  • ASTM D5815-95R01E01 : Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatography (LC)

  • ASTM D5816-99 : Test Methods for Carbon Black-External Surface Area by Multipoint Nitrogen Adsorption (Withdrawn 2000)

  • ASTM D5817 : Practice for Carbon Black, Pelleted/Reduction, Blending, and Drying of Gross Samples forTesting

  • ASTM D5817-03A : Practice for Carbon Black, Pelleted\MReduction, Blending, and Drying of Gross Samples for Testing

  • ASTM D5818-95R00 : Practice for Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage

  • ASTM D5819 : Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

  • ASTM D5819-99 : Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

  • ASTM D5820 : Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes

  • ASTM D5820-95R01E01 : Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes

  • ASTM D5821 : Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

  • ASTM D5821-01 : Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

  • ASTM D5822-03 : Test Method for Determining Seam Strength in Inflatable Restraint Cushions

  • ASTM D5823 : Test Method for Tuft Height of Pile Floor Coverings

  • ASTM D5823-05 : Test Method for Tuft Height of Pile Floor Coverings

  • ASTM D5824 : Test Method for Determining Resistance to Delamination of Adhesive Bonds in OverlayWood Core Laminates Exposed to Heat and Water

  • ASTM D582-48(1955) : Methods of Test for Resistance of Textile Fabrics and Yarns to Insect Pests (Withdrawn 1957)

  • ASTM D5824-98R03 : Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

  • ASTM D5826 : Tables of Body Measurements for Children, Sizes 2 to 6x/7

  • ASTM D5826-00 : Tables of Body Measurements for Children, Sizes 2 to 6x/7

  • ASTM D5827 : Test Method for Analysis of Engine Coolant for Chloride and Other Anions by IonChromatography

  • ASTM D5827-95R02 : Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

  • ASTM D5828 : Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine CoolantConcentrates

  • ASTM D5828-97R02 : Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

  • ASTM D5829 : Guide for Preparing a Training Program for Environmental Analytical Laboratories

  • ASTM D5829-96R01 : Guide for Preparing a Training Program for Environmental Analytical Laboratories

  • ASTM D5830 : Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography

  • ASTM D5830-95R01 : Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography

  • ASTM D5831 : Test Method for Screening Fuels in Soils

  • ASTM D5831-03 : Test Method for Screening Fuels in Soils

  • ASTM D5832 : Test Method for Volatile Matter Content of Activated Carbon Samples

  • ASTM D5832-98R03 : Test Method for Volatile Matter Content of Activated Carbon Samples

  • ASTM D5833 : Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans (Withdrawn 2004) No Replacement

  • ASTM D5833-95e1 : Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans (Withdrawn 2004)

  • ASTM D5834 : Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and CorrugatedFiberboard (Cardboard) (Withdrawn 2004) No Replacement

  • ASTM D5834-95 : Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004)

  • ASTM D5835 : Practice for Sampling Stationary Source Emissions for the Automated Determination of GasConcentrations

  • ASTM D5835-95R01 : Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations

  • ASTM D5836 : Test Method for Determination of 2,4 Toluene Diisocyanate (2,4 TDI) and 2,6 TolueneDiisocyanate (2,6 TDI) in Workplace Atmospheres (1 2 PP Method)

  • ASTM D5836-03 : Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

  • ASTM D583-63 : Methods of Test for Water Resistance of Textile Fabrics (Withdrawn 1971)

  • ASTM D58-37 : Specification for Materials for Sand-Cement and for Brick and Block Pavements (Withdrawn 1962)

  • ASTM D5837 : Test Method for Furanic Compounds in Electrical Insulating Liquids by High PerformanceLiquid Chromatography (HPLC)

  • ASTM D5837-99E01 : Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)

  • ASTM D5839 : Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy Dispersive XRay Fluorescence Spectrometry

  • ASTM D5839-96R01 : Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry

  • ASTM D584 : Test Method for Wool Content of Raw Wool Laboratory Scale

  • ASTM D5840 : Specification for Type II Polymer Modified Asphalt Cement for Use in Pavement Construction(Withdrawn 2005) No Replacement

  • ASTM D5840-00 : Specification for Type II Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)

  • ASTM D5841 : Specification for Type III Polymer Modified Asphalt Cement for Use in PavementConstruction (Withdrawn 2005) No Replacement

  • ASTM D5841-00 : Specification for Type III Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)

  • ASTM D5842 : Practice for Sampling and Handling of Fuels for Volatility Measurement

  • ASTM D5842-95R00 : Practice for Sampling and Handling of Fuels for Volatility Measurement

  • ASTM D5843 : Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

  • ASTM D5843-95R00E01 : Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

  • ASTM D5844 : Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (SequenceIID) (Withdrawn 2003) No Replacement

  • ASTM D5844-98 : Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)

  • ASTM D5845 : Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tertButanol in Gasoline by Infrared Spectroscopy

  • ASTM D5845-01 : Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and -Butanol in Gasoline by Infrared Spectroscopy

  • ASTM D5846 : Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the UniversalOxidation Test Apparatus

  • ASTM D5846-02 : Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

  • ASTM D5847 : Practice for Writing Quality Control Specifications for Test Methods for WaterAnalysis

  • ASTM D5847-02 : Practice for Writing Quality Control Specifications for Test Methods for Water Analysis

  • ASTM D5848 : Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings

  • ASTM D5848-05 : Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings

  • ASTM D5849-95R00E01 : Test Method for Evaluating Resistance of Modified, Bituminous Roofing Membranes to Cyclic Joint Displacement

  • ASTM D585 : Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, andRelated Product

  • ASTM D5850 : Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, andAnisotropy Ratio from a Network of Partially Penetrating Wells

  • ASTM D5850-95R00 : Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

  • ASTM D5851 : Guide for Planning and Implementing a Water Monitoring Program

  • ASTM D5851-95R00 : Guide for Planning and Implementing a Water Monitoring Program

  • ASTM D5852 : Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the JetIndex Method

  • ASTM D5852-00 : Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

  • ASTM D5853 : Test Method for Pour Point of Crude Oils

  • ASTM D5853-95R00E01 : Test Method for Pour Point of Crude Oils

  • ASTM D5854 : Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

  • ASTM D5854-96R00 : Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

  • ASTM D5855 : Test Method for (Analytical Procedure) for Determining Transmissivity and StorageCoefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well

  • ASTM D5855-95R00 : Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well

  • ASTM D5856 : Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a RigidWall, Compaction Mold Permeameter

  • ASTM D5856-95R02E01 : Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

  • ASTM D5857 : Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol andMethodology

  • ASTM D5857-05 : Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

  • ASTM D5858 : Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using LayeredElastic Theory

  • ASTM D5858-96R03 : Guide for Calculating Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

  • ASTM D5859 : Test Method for Determining the Traction of Footwear on Painted Surfaces Using theVariable Incidence Tester (Withdrawn 2005) No Replacement

  • ASTM D5859-96e1 : Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester (Withdrawn 2005)

  • ASTM D586 : Test Method for Ash in Pulp, Paper, and Paper Products

  • ASTM D5860 : Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze ThawResistance of Hydraulic Cement Mortar Specimens

  • ASTM D5860-95R02 : Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

  • ASTM D5861 : Guide for Significance of Particle Size Measurements of Coating Powders

  • ASTM D5861-95R02 : Guide for Significance of Particle Size Measurements of Coating Powders

  • ASTM D5862 : Test Method for Evaluation of Engine Oils in Two Stroke Cycle Turbo Supercharged 6V92TADiesel Engine

  • ASTM D5862-03 : Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine

  • ASTM D5863 : Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils andResidual Fuels by Flame Atomic Absorption Spectrometry

  • ASTM D5863-00A : Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

  • ASTM D5864 : Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or TheirComponents

  • ASTM D5864-00 : Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

  • ASTM D5865-04 : Test Method for Gross Calorific Value of Coal and Coke

  • ASTM D5866 : Test Method for Neps in Cotton Fibers (AFIS N Instrument)

  • ASTM D5866-05 : Test Method for Neps in Cotton Fibers (AFIS-N Instrument)

  • ASTM D5866-95 : Test Method for Neps in Cotton Fibers (AFIS-N Instrument)

  • ASTM D5867 : Test Methods for Measurement of Physical Properties of Cotton Fibers by High VolumeInstruments

  • ASTM D5867-05 : Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments

  • ASTM D5867-95 : Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments (Withdrawn 2004)

  • ASTM D5868 : Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

  • ASTM D5868-01 : Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

  • ASTM D5869 : Practice for Dark Oven Heat Exposure of Bituminous Materials

  • ASTM D5869-04A : Practice for Dark Oven Heat Exposure of Bituminous Materials

  • ASTM D5870 : Practice for Calculating Property Retention Index of Plastics

  • ASTM D5870-95R03 : Practice for Calculating Property Retention Index of Plastics

  • ASTM D5871 : Specification for Benzene for Cyclohexane Feedstock

  • ASTM D5871-04 : Specification for Benzene for Cyclohexane Feedstock

  • ASTM D5872 : Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Explorationand Installation of Subsurface Water Quality Monitoring Devices

  • ASTM D5872-95R00 : Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5873-00 : Test Method for Determination of Rock Hardness by Rebound Hammer Method

  • ASTM D5874 : Test Method for Determination of the Impact Value (IV) of a Soil

  • ASTM D5874-02 : Test Method for Determination of the Impact Value (IV) of a Soil

  • ASTM D587-40T(1971) : Method of Test for Case in Paper (Qualitative) (Withdrawn 1980)

  • ASTM D5875 : Guide for Use of Cable Tool Drilling and Sampling Methods for GeoenvironmentalExploration and Installation of Subsurface Water Quality Monitoring Devices

  • ASTM D5875-95R00 : Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5876 : Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods forGeoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices

  • ASTM D5876-95R00 : Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

  • ASTM D5877 : Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and TraceElements Diagrams Based on Data Analytical Calculations

  • ASTM D5877-95R00 : Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MDiagrams Based on Data Analytical Calculations

  • ASTM D5878 : Guide for Using Rock Mass Classification Systems for Engineering Purposes

  • ASTM D5878-00 : Guide for Using Rock-Mass Classification Systems for Engineering Purposes

  • ASTM D5879 : Practice for Surface Site Characterization for On Site Septic Systems

  • ASTM D5879-95R03 : Practice for Surface Site Characterization for On-Site Septic Systems

  • ASTM D588- : Method of Test for Alpha Beta and Gamma-Cellulose in Paper (Withdrawn 1979)

  • ASTM D5880 : Guide for Subsurface Flow and Transport Modeling

  • ASTM D5880-95R00 : Guide for Subsurface Flow and Transport Modeling

  • ASTM D5881 : Test Method for (Analytical Procedure) Determining Transmissivity of Confined NonleakyAquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

  • ASTM D5881-95R00 : Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

  • ASTM D5882-00 : Test Method for Low Strain Integrity Testing of Piles

  • ASTM D5883 : Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a MineralAmendment in Topsoil Used for Landscaping and Related Purposes

  • ASTM D5883-96R02 : Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

  • ASTM D5884 : Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

  • ASTM D5884-04A : Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

  • ASTM D5885 : Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High PressureDifferential Scanning Calorimetry

  • ASTM D5885-04 : Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

  • ASTM D5886 : Guide for Selection of Test Methods to Determine Rate of Fluid Permeation ThroughGeomembranes for Specific Applications

  • ASTM D5886-95R01 : Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications

  • ASTM D5887 : Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay LinerSpecimens Using a Flexible Wall Permeameter

  • ASTM D5887-04 : Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

  • ASTM D5888 : Guide for Storage and Handling of Geosynthetic Clay Liners

  • ASTM D5888-95R02E01 : Guide for Storage and Handling of Geosynthetic Clay Liners

  • ASTM D5889 : Practice for Quality Control of Geosynthetic Clay Liners

  • ASTM D5889-97R03 : Practice for Quality Control of Geosynthetic Clay Liners

  • ASTM D589 : Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing andPaper Backing)

  • ASTM D5890 : Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

  • ASTM D5890-02 : Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

  • ASTM D5891 : Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

  • ASTM D5891-02 : Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

  • ASTM D5892 : Specification for Type IV Polymer Modified Asphalt Cement for Use in PavementConstruction (Withdrawn 2005) No Replacement

  • ASTM D5892-00 : Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)

  • ASTM D5893 : Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealantfor Portland Cement Concrete Pavements

  • ASTM D5893-04 : Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

  • ASTM D5894 : Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in aFog/Dry Cabinet and a UV/Condensation Cabinet)

  • ASTM D5894-05 : Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

  • ASTM D5895 : Test Methods for Evaluating Drying or Curing During Film Formation of Organic CoatingsUsing Mechanical Recorders

  • ASTM D5895-03 : Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

  • ASTM D5896 : Test Method for Carbohydrate Distribution of Cellulosic Materials

  • ASTM D5896-96R01 : Test Method for Carbohydrate Distribution of Cellulosic Materials

  • ASTM D5897 : Test Method for Determination of Percent Hydroxyl on Cellulose Esters by PotentiometricTitration/Alternative Method

  • ASTM D5897-96R01 : Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration\MAlternative Method

  • ASTM D5898 : Guide for Standard Details for Adhered Sheet Waterproofing

  • ASTM D5898-96 : Guide for Standard Details for Adhered Sheet Waterproofing

  • ASTM D5899 : Classification System for Rubber Compounding Materials for Use in Computer MaterialManagement Systems

  • ASTM D5899-98R02 : Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

  • ASTM D590 : Test Method for Petroleum Wax in Paper

  • ASTM D5900 : Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

  • ASTM D5900-03 : Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

  • ASTM D5901 : Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)

  • ASTM D5901-03 : Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)

  • ASTM D5902 : Test Method for Rubber Determination of Residual Unsaturation in Hydrogenated NitrileRubber (HNBR) by Iodine Value

  • ASTM D5902-96R01 : Test Method for Rubber\MDetermination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

  • ASTM D5903 : Guide for Planning and Preparing for a Groundwater Sampling Event

  • ASTM D5903-96R01 : Guide for Planning and Preparing for a Groundwater Sampling Event

  • ASTM D5904 : Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water byUltraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

  • ASTM D5904-02 : Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

  • ASTM D5905 : Practice for the Preparation of Substitute Wastewater

  • ASTM D5905-98R03 : Practice for the Preparation of Substitute Wastewater

  • ASTM D5906 : Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths

  • ASTM D5906-02 : Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths

  • ASTM D5907 : Test Method for Filterable and Nonfilterable Matter in Water

  • ASTM D5907-03 : Test Method for Filterable and Nonfilterable Matter in Water

  • ASTM D5908 : Test Method for Resin Binder Distribution and Binder Penetration Analysis of PolyesterNonwoven Fabrics

  • ASTM D5908-96R04 : Test Method for Resin Binder Distribution and Binder Penetration Analysis of Polyester Nonwoven Fabrics

  • ASTM D5909 : Test Method for Drying Time of Oxidative Drying Printing Inks by Squalene Resistance

  • ASTM D5909-96AR01 : Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

  • ASTM D5910 : Test Method for Determination of Free Formaldehyde in Emulsion Polymers by LiquidChromatography

  • ASTM D5910-96 : Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

  • ASTM D5911 : Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

  • ASTM D5911-96R02E01 : Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

  • ASTM D5912 : Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an UnconfinedAquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)

  • ASTM D5912-96R04 : Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)

  • ASTM D5913 : Test Method for Evaluation of Cleanability of Paint Brushes

  • ASTM D5913-96R03 : Test Method for Evaluation of Cleanability of Paint Brushes

  • ASTM D5916 : Test Method for Detection and Enumeration of Clostridium perfringens from Water andExtracted Sediments by Membrane Filtration (MF)

  • ASTM D591-67(1974) : Method of Test for Starch in Paper (Withdrawn 1981)

  • ASTM D5916-96R02 : Test Method for Detection and Enumeration of from Water and Extracted Sediments by Membrane Filtration (MF)

  • ASTM D5917 : Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by GasChromatography and External Calibration

  • ASTM D5917-02 : Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

  • ASTM D5918 : Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

  • ASTM D5918-96R01 : Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

  • ASTM D5919 : Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro IsothermTechnique for Adsorbates at ppb Concentrations

  • ASTM D5919-96R01 : Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

  • ASTM D5920 : Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by NeumanMethod

  • ASTM D5920-96 : Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method

  • ASTM D5921 : Practice for Subsurface Site Characterization of Test Pits for On Site Septic Systems

  • ASTM D5921-96R03E01 : Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

  • ASTM D5922 : Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

  • ASTM D5922-96R04 : Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

  • ASTM D5923 : Guide for Selection of Kriging Methods in Geostatistical Site Investigations

  • ASTM D5923-96R04 : Guide for Selection of Kriging Methods in Geostatistical Site Investigations

  • ASTM D5924 : Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

  • ASTM D592-46(1958) : Specification for Olive Oil Solid Soap (Type A, Straight; Type B, Blended) (Withdrawn 1958)

  • ASTM D5924-96R04 : Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

  • ASTM D5925 : Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On SiteSeptic Systems (Withdrawn 2005) No Replacement

  • ASTM D5925-96E01 : Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems

  • ASTM D5925-96e1 : Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems (Withdrawn 2005)

  • ASTM D5926-04 : Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

  • ASTM D5927-03 : Specification for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

  • ASTM D5928 : Test Method for Screening of Waste for Radioactivity

  • ASTM D5928-96R03 : Test Method for Screening of Waste for Radioactivity

  • ASTM D5929 : Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid WasteComposting Conditions by Compost Respirometry

  • ASTM D5929-96R04 : Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry

  • ASTM D5930 : Test Method for Thermal Conductivity of Plastics by Means of a Transient Line SourceTechnique

  • ASTM D5930-01 : Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

  • ASTM D5931 : Test Method for Density and Relative Density of Engine Coolant Concentrates and AqueousEngine Coolants by Digital Density Meter

  • ASTM D5931-96R02 : Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

  • ASTM D5932 : Test Method for Determination of 2,4 Toluene Diiso cyanate (2,4 TDI) and 2,6 Toluene Diisocyanate (2,6 TDI) in Air (with 9 (N Methylaminomethyl) Anthracene Method) (MAMA) in theWorkplace

  • ASTM D5932-96R02 : Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

  • ASTM D5933 : Specification for 2 5/8 in. and 4 in. Diameter Metal Shear Plates for Use in WoodConstructions

  • ASTM D5933-96R01 : Specification for 2-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions

  • ASTM D5934 : Test Method for Determination of Modulus of Elasticity for Rigid and Semi Rigid PlasticSpecimens by Controlled Rate of Loading Using Three Point Bending

  • ASTM D5934-02 : Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending

  • ASTM D5935-96 : Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)

  • ASTM D593-69 : Specification for Salt-Water Soap (Coconut Oil Type) (Withdrawn 1974)

  • ASTM D5936-96 : Specification for Multipurpose Test Specimens (Withdrawn 1998)

  • ASTM D5937-96 : Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)

  • ASTM D5938-96 : Test Method for Determination of Tensile Properties (Withdrawn 1998)

  • ASTM D5939-96 : Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials (Withdrawn 1998)

  • ASTM D5940-96 : Test Method for Injection Moulding of Test Specimens of Thermoplatic Materials-Plates (Withdrawn 1998)

  • ASTM D5941-96 : Test Method for Determination of Izod Impact Strength (Withdrawn 1998)

  • ASTM D5942-96 : Test Method for Determination of Charpy Impact Strength (Withdrawn 1998)

  • ASTM D5943-96 : Test Method for Determination of Flexural Properties (Withdrawn 1998)

  • ASTM D5944-96 : Test Method for Determination of Temperature of Deflection Under Load (Withdrawn 1998)

  • ASTM D5945-96 : Test Method for Determination of Temperature of Deflection Under Load for Plastics and Ebonite (Withdrawn 1998)

  • ASTM D5946 : Test Method for Corona Treated Polymer Films Using Water Contact Angle Measurements

  • ASTM D5946-04 : Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

  • ASTM D5947 : Test Methods for Physical Dimensions of Solid Plastics Specimens

  • ASTM D5947-03 : Test Methods for Physical Dimensions of Solid Plastics Specimens

  • ASTM D5948 : Specification for Molding Compounds, Thermosetting

  • ASTM D5948-05 : Specification for Molding Compounds, Thermosetting

  • ASTM D594-85(1997) : Specification for Sodium Sesquisilicate (Discontined 2001)

  • ASTM D5949 : Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

  • ASTM D5949-01 : Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

  • ASTM D5950 : Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

  • ASTM D5950-02 : Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

  • ASTM D5951 : Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods forPlastics in Solid Waste for Toxicity and Compost Quality Testing

  • ASTM D5951-96R02 : Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing

  • ASTM D5952 : Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks ofLegionellosis (Legionnaires’ Disease or Pontiac Fever)

  • ASTM D5952-02 : Guide for Inspecting Water Systems for Legionellae and Investigating Possible Outbreaks of Legionellosis (Legionnaires’ Disease or Pontiac Fever)

  • ASTM D59-53 : Specification for Granite Block for Pavements (Withdrawn 1962)

  • ASTM D5953M : Test Method for Determination of Non Methane Organic Compounds (NMOC) in Ambient AirUsing Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)

  • ASTM D5953M-96R01 : Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method \[Metric\]

  • ASTM D5954 : Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic AbsorptionSpectroscopy

  • ASTM D5954-98 : Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

  • ASTM D5955 : Test Methods for Estimating Contribution of Environmental Tobacco Smoke to RespirableSuspended Particles Based on UVPM and FPM

  • ASTM D5955-02 : Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM

  • ASTM D5956 : Guide for Sampling Strategies for Heterogeneous Wastes

  • ASTM D5956-96R01 : Guide for Sampling Strategies for Heterogeneous Wastes

  • ASTM D5957 : Guide for Flood Testing Horizontal Waterproofing Installations

  • ASTM D5957-98 : Guide for Flood Testing Horizontal Waterproofing Installations

  • ASTM D5958 : Practices for Preparation of Oil Based Ink Resin Solutions

  • ASTM D595-85(1997) : Specification for Tetrasodium Pyrophosphate (Anhydrous) (Withdrawn 2001)

  • ASTM D5958-99R05E01 : Practices for Preparation of Oil-Based Ink Resin Solutions

  • ASTM D5959 : Test Method for Bulk Density of Level Paintbrush Filaments

  • ASTM D5959-96R03 : Test Method for Bulk Density of Level Paintbrush Filaments

  • ASTM D596 : Guide for Reporting Results of Analysis of Water

  • ASTM D5960 : Specification for Technical Grade Ethylene Dichloride

  • ASTM D5960-03 : Specification for Technical Grade Ethylene Dichloride

  • ASTM D5961/D5961M : Test Method for Bearing Response of Polymer Matrix Composite Laminates

  • ASTM D5961/D5961M-05 : Test Method for Bearing Response of Polymer Matrix Composite Laminates

  • ASTM D5962 : Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear PowerFacility

  • ASTM D5962-96R99 : Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility

  • ASTM D5963 : Test Method for Rubber Property/Abrasion Resistance (Rotary Drum Abrader)

  • ASTM D5963-04 : Test Method for Rubber Property\MAbrasion Resistance (Rotary Drum Abrader)

  • ASTM D5964-96R01 : Practice for Rubber IRM 902 and IRM 903 Replacement Oils for No. 2 and No. 3 Oils

  • ASTM D5965 : Test Methods for Specific Gravity of Coating Powders

  • ASTM D5965-02 : Test Methods for Specific Gravity of Coating Powders

  • ASTM D5966 : Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light Duty DieselEngine

  • ASTM D5966-02 : Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

  • ASTM D5967 : Test Method for Evaluation of Diesel Engine Oils in T 8 Diesel Engine

  • ASTM D5967-04 : Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

  • ASTM D5968 : Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

  • ASTM D5968-04 : Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121|SDC

  • ASTM D5969 : Test Method for Corrosion Preventive Properties of Lubricating Greases in Presence of DiluteSynthetic Sea Water Environments

  • ASTM D5969-02 : Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

  • ASTM D597- : Specification for Cut-Back Asphalt (Rapid Curing Type) (Withdrawn 1964)

  • ASTM D5970 : Practice for Deterioration of Geotextiles from Outdoor Exposure

  • ASTM D5970-96R02 : Practice for Deterioration of Geotextiles from Outdoor Exposure

  • ASTM D5971 : Practice for Sampling Freshly Mixed Controlled Low Strength Material

  • ASTM D5971-01 : Practice for Sampling Freshly Mixed Controlled Low-Strength Material

  • ASTM D5972 : Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

  • ASTM D5972-02 : Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

  • ASTM D5973 : Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in ExpansionJoint Sealing

  • ASTM D5973-97R03 : Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

  • ASTM D5974 : Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary GasChromatography

  • ASTM D5974-00 : Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

  • ASTM D5975 : Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption

  • ASTM D5975-96R04 : Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption

  • ASTM D5976 : Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction(Withdrawn 2005) No Replacement

  • ASTM D5976-00 : Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)

  • ASTM D5977 : Specification for High Load Rotational Spherical Bearings for Bridges and Structures

  • ASTM D5977-03 : Specification for High Load Rotational Spherical Bearings for Bridges and Structures

  • ASTM D5978 : Guide for Maintenance and Rehabilitation of Ground Water Monitoring Wells

  • ASTM D5978-96E01 : Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells

  • ASTM D5979 : Guide for Conceptualization and Characterization of Ground Water Systems

  • ASTM D5979-96R02 : Guide for Conceptualization and Characterization of Ground-Water Systems

  • ASTM D598- : Specification for Cut-Back Asphalt (Medium Curing Type) (Withdrawn 1964)

  • ASTM D5980 : Guide for Selection and Documentation of Existing Wells for Use in Environmental SiteCharacterization and Monitoring

  • ASTM D5980-96R04 : Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

  • ASTM D5981 : Guide for Calibrating a Ground Water Flow Model Application

  • ASTM D5981-96R02 : Guide for Calibrating a Ground-Water Flow Model Application

  • ASTM D5982 : Test Method for Determining Cement Content of Fresh Soil Cement (Heat of NeutralizationMethod)

  • ASTM D5982-02 : Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

  • ASTM D5983 : Specification for Methyl Tertiary Butyl Ether (MTBE) for Downstream Blending for Use inAutomotive Spark Ignition Engine Fuel

  • ASTM D5983-97R02 : Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

  • ASTM D5984 : Test Method for Semi Quantitative Field Test Method for Base Number in New and UsedLubricants by Color Indicator Titration

  • ASTM D5984-97R02E01 : Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

  • ASTM D5985 : Test Method for Pour Point of Petroleum Products (Rotational Method)

  • ASTM D5985-02 : Test Method for Pour Point of Petroleum Products (Rotational Method)

  • ASTM D5986 : Test Method for Determination of Oxygenates, Benzene, Toluene, C8 C12 Aromatics andTotal Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform InfraredSpectroscopy

  • ASTM D5986-96R01 : Test Method for Determination of Oxygenates, Benzene, Toluene, C\NC Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

  • ASTM D5987 : Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and IonSelective Electrode or Ion Chromatograph Methods

  • ASTM D5987-96R02 : Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods

  • ASTM D5988 : Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or ResidualPlastic Materials After Composting

  • ASTM D5988-03 : Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting

  • ASTM D5989 : Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

  • ASTM D5989-03 : Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

  • ASTM D5990 : Classification System for Polyketone Injection Molding and Extrusion Materials (PK)

  • ASTM D5990-00 : Classification System for Polyketone Injection Molding and Extrusion Materials (PK)

  • ASTM D5991-96R02 : Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

  • ASTM D5992 : Guide for Dynamic Testing of Vulcanized Rubber and Rubber Like Materials Using VibratoryMethods

  • ASTM D5992-96R01E01 : Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

  • ASTM D5993 : Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

  • ASTM D5993-99R04 : Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

  • ASTM D5994 : Test Method for Measuring Core Thickness of Textured Geomembrane

  • ASTM D5994-98R03 : Test Method for Measuring Core Thickness of Textured Geomembrane

  • ASTM D5995 : Guide for Environmental Site Characterization in Cold Regions

  • ASTM D5995-98R04 : Guide for Environmental Site Characterization in Cold Regions

  • ASTM D5996 : Test Method for Measuring Anionic Contaminants in High Purity Water by On Line IonChromatography

  • ASTM D599-61 : Method of Test for Physical State of Cure of Vulcanized Rubber (T-50 Test) (Withdrawn 1966)

  • ASTM D5996-96R00 : Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography

  • ASTM D5997 : Test Method for On Line Monitoring of Total Carbon, Inorganic Carbon in Water byUltraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

  • ASTM D5997-96R00 : Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

  • ASTM D5998 : Specification for Molded Polyethylene Shipping and Storage Drums

  • ASTM D5998-03 : Specification for Molded Polyethylene Shipping and Storage Drums

  • ASTM D5999 : Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003) NoReplacement

  • ASTM D5999-96 : Test Method for Noninterference of Adhesives in Repulping (Withdrawn 2003)

  • ASTM D6 : Test Method for Loss on Heating of Oil and Asphaltic Compounds

  • ASTM D600 : Specification for Liquid Paint Driers

  • ASTM D6000 : Guide for Presentation of Water Level Information From Ground Water Sites

  • ASTM D6000-96R02 : Guide for Presentation of Water-Level Information From Ground-Water Sites

  • ASTM D6001 : Guide for Direct Push Water Sampling for Geoenvironmental Investigations

  • ASTM D6001-96R02 : Guide for Direct-Push Water Sampling for Geoenvironmental Investigations

  • ASTM D6002 : Guide for Assessing the Compostability of Environmentally Degradable Plastics

  • ASTM D6002-96R02E01 : Guide for Assessing the Compostability of Environmentally Degradable Plastics

  • ASTM D6003 : Test Method for Determining Weight Loss From Plastic Materials Exposed to SimulatedMunicipal Solid Waste (MSW) Aerobic Compost Environment (Withdrawn 2005) No Replacement

  • ASTM D6003-96 : Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005)

  • ASTM D6004 : Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

  • ASTM D6004-04 : Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

  • ASTM D6005 : Test Method for Determining Slump Resistance of Carpet Adhesives

  • ASTM D6005-03 : Test Method for Determining Slump Resistance of Carpet Adhesives

  • ASTM D6006 : Guide for Assessing Biodegradability of Hydraulic Fluids

  • ASTM D6006-97AR03 : Guide for Assessing Biodegradability of Hydraulic Fluids

  • ASTM D6007 : Test Method for Determining Formaldehyde Concentration in Air from Wood Products Usinga Small Scale Chamber

  • ASTM D6007-02 : Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber

  • ASTM D6008 : Practice for Conducting Environmental Baseline Surveys

  • ASTM D6008-96R05 : Practice for Conducting Environmental Baseline Surveys

  • ASTM D6009 : Guide for Sampling Waste Piles

  • ASTM D6009-96R01 : Guide for Sampling Waste Piles

  • ASTM D601 : Specification for Oiticica Oil (Permanently Liquid)

  • ASTM D6010 : Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from SolidMatrices

  • ASTM D6010-96R01 : Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices

  • ASTM D6011 : Test Method for Determining the Performance of a Sonic Anemometer/Thermometer

  • ASTM D6011-96R03 : Test Method for Determining the Performance of a Sonic Anemometer/Thermometer

  • ASTM D6012 : Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer

  • ASTM D6012-03 : Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer

  • ASTM D6013 : Test Method for Determination of Area Stability of Leather to Laundering

  • ASTM D6013-00 : Test Method for Determination of Area Stability of Leather to Laundering

  • ASTM D6014 : Test Method for Determination of Dynamic Water Absorption of Leather Surfaces

  • ASTM D6014-00 : Test Method for Determination of Dynamic Water Absorption of Leather Surfaces

  • ASTM D6015 : Test Method for Static Water Absorption of Leather

  • ASTM D6015-00R01 : Test Method for Static Water Absorption of Leather

  • ASTM D6016 : Test Method for Determination of Nitrogen, Water Extractable in Leather

  • ASTM D6016-96R01 : Test Method for Determination of Nitrogen, Water Extractable in Leather

  • ASTM D6017 : Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather

  • ASTM D6017-97R03 : Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather

  • ASTM D6018 : Test Method for Determining the Presence of Lead Salts in Leather

  • ASTM D6018-96R01 : Test Method for Determining the Presence of Lead Salts in Leather

  • ASTM D6019 : Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (AmmoniumPersulfate Oxidation)

  • ASTM D6019-96R01 : Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)

  • ASTM D602 : Specification for Barium Sulfate Pigments

  • ASTM D6020 : Practice for Calculation of (Non Mineral) Combined Tanning Agents and Degree of Tannage

  • ASTM D6020-00 : Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage

  • ASTM D6021-96R01E01 : Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

  • ASTM D6022 : Practice for Calculation of Permanent Shear Stability Index

  • ASTM D6022-01 : Practice for Calculation of Permanent Shear Stability Index

  • ASTM D6023 : Test Method for Density (Unit Weight), Yield, Cement Content, and AirContent (Gravimetric)

  • ASTM D6023-02 : Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)

  • ASTM D60-24 : Methods of Testing Rubber Hose (Withdrawn 1933)

  • ASTM D6024 : Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to DetermineSuitability for Load Application

  • ASTM D6024-02 : Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

  • ASTM D6025 : Guide for Developing and Evaluating Ground Water Modeling Codes

  • ASTM D6025-96R02 : Guide for Developing and Evaluating Ground-Water Modeling Codes

  • ASTM D6026 : Practice for Using Significant Digits in Geotechnical Data

  • ASTM D6026-01E01 : Practice for Using Significant Digits in Geotechnical Data

  • ASTM D6027 : Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes

  • ASTM D6027-96R04 : Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes

  • ASTM D6028 : Test Method (Analytical Procedure) for Determining Hydraulic Properties of a ConfinedAquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified HantushMethod

  • ASTM D6028-96R04 : Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

  • ASTM D6029 : Test Method (Analytical Procedure) for Determining Hydraulic Properties of a ConfinedAquifer and a Leaky Confining Bed with Negligible Storage by the Hantush Jacob Method

  • ASTM D6029-96R04 : Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

  • ASTM D603 : Specification for Aluminum Silicate Pigments (Hydrous) (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM D6030 : Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitiviy andVulnerability

  • ASTM D6030-96R02 : Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitivity and Vulnerability

  • ASTM D6031 : Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by theNuclear Method in Horizontal, Slanted, and Vertical Access Tubes

  • ASTM D6031-96R04 : Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

  • ASTM D6032 : Test Method for Determining Rock Quality Designation (RQD) of Rock Core

  • ASTM D6032-02 : Test Method for Determining Rock Quality Designation (RQD) of Rock Core

  • ASTM D6033 : Guide for Describing the Functionality of a Ground Water Modeling Code

  • ASTM D6033-96R02 : Guide for Describing the Functionality of a Ground-Water Modeling Code

  • ASTM D6034 : Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in aConfined Aquifer from a Constant Rate Pumping Test

  • ASTM D6034-96R04 : Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

  • ASTM D6035 : Test Method for Determining the Effect of Freeze Thaw on Hydraulic Conductivity ofCompacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter

  • ASTM D6035-02 : Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter

  • ASTM D6036 : Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions andTrace Elements/Use of Maps

  • ASTM D603-66(1996)e1 : Specification for Aluminum Silicate Pigments (Hydrous) (Withdrawn 2004)

  • ASTM D6036-96R02 : Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MUse of Maps

  • ASTM D6037 : Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

  • ASTM D6037-96R02 : Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

  • ASTM D6038 : Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by PrecipitationTemperature (Cloud Point

  • ASTM D6038-05 : Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

  • ASTM D6039/D6039M : Specification for Crates, Wood, Open and Covered

  • ASTM D6039/D6039M-02 : Specification for Crates, Wood, Open and Covered

  • ASTM D604 : Specification for Diatomaceous Silica Pigment (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM D6040 : Guide to Test Methods for Unsintered Polytetrafluoroethylene (PTFE) ExtrudedFilm or Tape

  • ASTM D6040-01 : Guide to Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

  • ASTM D6041 : An American National Standard Standard Specification for Contact-Molded /Fiberglass/ (Glass-Fiber-

  • ASTM D6041-97R02 : Specification for Contact-Molded |P`Fiberglass|P’ (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

  • ASTM D6042 : Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives inPolypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

  • ASTM D6042-04 : Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

  • ASTM D6043 : Guide for Selection of Permanent and Durable Artist’s Paper

  • ASTM D6043-01 : Guide for Selection of Permanent and Durable Artist’s Paper

  • ASTM D6044 : Guide for Representative Sampling for Management of Waste and Contaminated Media

  • ASTM D6044-96R03 : Guide for Representative Sampling for Management of Waste and Contaminated Media

  • ASTM D6045 : Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

  • ASTM D6045-04 : Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

  • ASTM D6046 : Classification of Hydraulic Fluids for Environmental Impact

  • ASTM D6046-02 : Classification of Hydraulic Fluids for Environmental Impact

  • ASTM D6047 : Test Methods for Rubber, Raw Determination of 5 Ethylidenenorbornene (ENB) orDicyclopentadiene (DCPD) in Ethylene Propylene Diene (EPDM) Terpolymers

  • ASTM D6047-99R03 : Test Methods for Rubber, Raw\MDetermination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

  • ASTM D6048 : Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, andThermoplastic Elastomers

  • ASTM D6048-02 : Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

  • ASTM D604-81(1996)e1 : Specification for Diatomaceous Silica Pigment (Withdrawn 2003)

  • ASTM D6049 : Test Method for Rubber Property/Measurement of the Viscous and Elastic Behavior ofUnvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

  • ASTM D6049-03 : Test Method for Rubber Property\MMeasurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

  • ASTM D605 : Specification for Magnesium Silicate Pigment (Talc)

  • ASTM D6050 : Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste

  • ASTM D6050-97R03E01 : Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste

  • ASTM D6051 : Guide for Composite Sampling and Field Subsampling for Environmental Waste ManagementActivities

  • ASTM D6051-96R01 : Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities

  • ASTM D6052 : Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by EnergyDispersive X Ray Fluorescence

  • ASTM D6052-97R03 : Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence

  • ASTM D6053-03 : Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

  • ASTM D6054 : Practice for Conditioning Electrical Insulating Materials for Testing

  • ASTM D6054-97R04 : Practice for Conditioning Electrical Insulating Materials for Testing

  • ASTM D6055 : Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases andCrates

  • ASTM D6055-96R02 : Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates

  • ASTM D6056 : Test Method for Determining Concentration of Airborne Single Crystal Ceramic Whiskers inthe Workplace Environement by Transmission Electron Microscopy

  • ASTM D6056-96R01 : Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

  • ASTM D6057 : Test Method for Determining Concentration of Airborne Single Crystal Ceramic Whiskers inthe Workplace Environment by Phase Contrast Microscopy

  • ASTM D6057-96R01E01 : Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

  • ASTM D6058 : Practice for Determining Concentration of Airborne Single Crystal Ceramic Whiskers in theWorkplace Environment

  • ASTM D6058-96R01 : Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment

  • ASTM D6059 : Test Method for Determining Concentration of Airborne Single Crystal Ceramic Whiskers inthe Workplace Environment by Scanning Electron Microscopy

  • ASTM D6059-96R01 : Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

  • ASTM D6060 : Practice for Sampling of Process Vents With a Portable Gas Chromatograph

  • ASTM D6060-96R01 : Practice for Sampling of Process Vents with a Portable Gas Chromatograph

  • ASTM D6061 : Practice for Evaluating the Performance of Respirable Aerosol Samplers

  • ASTM D6061-01 : Practice for Evaluating the Performance of Respirable Aerosol Samplers

  • ASTM D6062M : Guide for Personal Samplers of Health Related Aerosol Fractions [Metric]

  • ASTM D6062M-96R01 : Guide for Personal Samplers of Health-Related Aerosol Fractions \[Metric\]

  • ASTM D6063 : Guide for Sampling of Drums and Similar Containers by Field Personnel

  • ASTM D6063-96R01 : Guide for Sampling of Drums and Similar Containers by Field Personnel

  • ASTM D6064 : Specification for HFC 227ea, 1,1,1,2,3,3,3 Heptafluoropropane (CF3CHFCF3)

  • ASTM D6064-03 : Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF 3)

  • ASTM D606-42 : Specification for Lead Titanate (Withdrawn 1951)

  • ASTM D6065 : Practice for Handling, Transportation, and Storage of HFC 227ea 1,1,1,2,3,3,3Heptafluoropropane (CF3CHFCF3)

  • ASTM D6065-00 : Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CFCHFCF)

  • ASTM D6066 : Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation ofLiquefaction Potential

  • ASTM D6066-96R04 : Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

  • ASTM D6067 : Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization

  • ASTM D6067-96R03 : Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization

  • ASTM D6068 : Test Method for Determining J R Curves of Plastic Materials

  • ASTM D6068-96R02E01 : Test Method for Determining J-R Curves of Plastic Materials

  • ASTM D6069 : Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion andReduced Pressure Chemiluminescence Detection

  • ASTM D6069-01 : Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

  • ASTM D607 : Specification for Wet Ground Mica Pigments

  • ASTM D6070 : Test Methods for Physical Properties of Smooth Wall, Coilable, Polyethylene (PE) Conduit(Duct) for Preassembled Wire and Cable

  • ASTM D6070-02 : Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

  • ASTM D6071 : Test Method for Low Level Sodium in High Purity Water by Graphite Furnace AtomicAbsorption Spectroscopy

  • ASTM D6071-96R00 : Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

  • ASTM D6072 : Guide for Obtaining Samples of Geosynthetic Clay Liners

  • ASTM D6072-96R02 : Guide for Obtaining Samples of Geosynthetic Clay Liners

  • ASTM D6073 : Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester

  • ASTM D6073-96R01 : Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester

  • ASTM D6074-99 : Guide for Characterizing Hydrocarbon Lubricant Base Oils

  • ASTM D6075 : Test Method for Cracking Resistance of Leather

  • ASTM D6075-00 : Test Method for Cracking Resistance of Leather

  • ASTM D6076 : Test Method for Shrinkage Temperature of Leather

  • ASTM D6076-03 : Test Method for Shrinkage Temperature of Leather

  • ASTM D6077 : Test Method for Trapezoid Tearing Strength of Leather

  • ASTM D6077-00 : Test Method for Trapezoid Tearing Strength of Leather

  • ASTM D6078 : Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball on CylinderLubricity Evaluator (SLBOCLE)

  • ASTM D6078-04 : Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

  • ASTM D6079 : Test Method for Evaluating Lubricity of Diesel Fuels by the High Frequency Reciprocating Rig(HFRR)

  • ASTM D6079-04 : Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

  • ASTM D608 : Specification for Dibutyl Phthalate

  • ASTM D6080-97R02 : Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

  • ASTM D6081 : Practice for Aquatic Toxicity Testing of Lubricants : Sample Preparation and ResultsInterpretation

  • ASTM D6081-98R04 : Practice for Aquatic Toxicity Testing of Lubricants : Sample Preparation and Results Interpretation

  • ASTM D6082 : Test Method for High Temperature Foaming Characteristics of Lubricating Oils

  • ASTM D6082-01 : Test Method for High Temperature Foaming Characteristics of Lubricating Oils

  • ASTM D6083 : Specification for Liquid Applied Acrylic Coating Used in Roofing

  • ASTM D6083-05 : Specification for Liquid Applied Acrylic Coating Used in Roofing

  • ASTM D6084 : Test Method for Elastic Recovery of Bituminuous Materials by Ductilometer

  • ASTM D6084-04 : Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

  • ASTM D6085 : Practice for Sampling in Rubber Testing/Terminology and Basic Concepts

  • ASTM D6085-97R02 : Practice for Sampling in Rubber Testing\MTerminology and Basic Concepts

  • ASTM D6086 : Test Method for Carbon Black/Void Volume (VV)

  • ASTM D6086-05 : Test Method for Carbon Black\MVoid Volume (VV)

  • ASTM D6087 : Test Method for Evaluating Asphalt Covered Concrete Bridge Decks Using GroundPenetrating Radar

  • ASTM D6087-03 : Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

  • ASTM D6088 : Practice for Installation of Geocomposite Pavement Drains

  • ASTM D6088-97R02 : Practice for Installation of Geocomposite Pavement Drains

  • ASTM D6089 : Guide for Documenting a Ground Water Sampling Event

  • ASTM D6089-97R03E01 : Guide for Documenting a Ground-Water Sampling Event

  • ASTM D609 : Practice for Preparation of Cold Rolled Steel Panels for Testing Paint, Varnish, ConversionCoatings, and Related Coating Products

  • ASTM D6090 : Test Method for Softening Point Resins (Mettler Cup and Ball Method)

  • ASTM D6090-99R04 : Test Method for Softening Point Resins (Mettler Cup and Ball Method)

  • ASTM D6091-03 : Practice for 99 \%/95 \% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error

  • ASTM D6092 : Practice for Specifying Standard Sizes of Stone for Erosion Control

  • ASTM D6092-97R03 : Practice for Specifying Standard Sizes of Stone for Erosion Control

  • ASTM D6093 : Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using aHelium Gas Pycnometer

  • ASTM D6093-97R03 : Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

  • ASTM D6094 : Guide to Assess the Compostability of Environmentally Degradable Nonwoven Fabrics

  • ASTM D6094-97R04 : Guide to Assess the Compostability of Environmentally Degradable Nonwoven Fabrics

  • ASTM D6095-99 : Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

  • ASTM D6096-02 : Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90|SDC Operation

  • ASTM D6097 : Test Method for Relative Resistance to Vented Water Tree Growth in Solid Dielectric Insulating Materials

  • ASTM D6097-01A : Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials

  • ASTM D6098 : Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

  • ASTM D6098-97R03 : Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

  • ASTM D6099 : Test Method for Polyurethane Raw Materials : Determination of Acidity in Moderate to HighAcidity Aromatic Isocyanates

  • ASTM D6099-03 : Test Method for Polyurethane Raw Materials : Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

  • ASTM D61 : Test Method for Softening Point of Pitches (Cube in Water Method)

  • ASTM D6100 : Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)

  • ASTM D6100-03 : Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)

  • ASTM D6101 : Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard byImage Analysis

  • ASTM D6101-97 : Test Method for Equivalent Black Area (EBA) of Dirt in Pulp, Paper and Paperboard by Image Analysis

  • ASTM D6102 : Guide for Installation of Geosynthetic Clay Liners

  • ASTM D6102-04 : Guide for Installation of Geosynthetic Clay Liners

  • ASTM D6103 : Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)

  • ASTM D6103-04 : Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)

  • ASTM D6104 : Practice for Determining the Performance of Oil/Water Separators Subjected to Surface RunOff

  • ASTM D6104-97R03 : Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

  • ASTM D6105 : Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics forAdhesive Bonding

  • ASTM D6105-04 : Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding

  • ASTM D6106 : Guide for Establishing the Nomenclature of Ground Water Aquifers

  • ASTM D6106-97R04 : Guide for Establishing Nomenclature of Ground-Water Aquifers

  • ASTM D6107 : Specification for Stop Leak Additive for Engine Coolants Used in Light Duty Service

  • ASTM D6107-97R02 : Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

  • ASTM D6108 : Test Method for Compressive Properties of Plastic Lumber and Shapes

  • ASTM D6108-03 : Test Method for Compressive Properties of Plastic Lumber and Shapes

  • ASTM D6109 : Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber andRelated Products

  • ASTM D6109-05 : Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

  • ASTM D6110 : Test Method for Determining the Charpy Impact Resistance of Notched Specimens ofPlastics

  • ASTM D6110-04E01 : Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

  • ASTM D6111-03 : Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

  • ASTM D6112 : Test Methods for Compressive and Flexural Creep and Creep Rupture of Plastic Lumber andShapes

  • ASTM D6112-97 : Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

  • ASTM D6113-03 : Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

  • ASTM D6114 : Specification for Asphalt Rubber Binder

  • ASTM D6114-97R02 : Specification for Asphalt-Rubber Binder

  • ASTM D6115 : Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional FiberReinforced Polymer Matrix Composites

  • ASTM D6115-97R04 : Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

  • ASTM D6116 : Test Method for Blocking

  • ASTM D6116-00 : Test Method for Blocking

  • ASTM D6117 : Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes

  • ASTM D6117-97 : Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

  • ASTM D6119 : Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from FootTraffic

  • ASTM D6119-05 : Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic

  • ASTM D612 : Test Method for Carbonizable Substances in Paraffin Wax

  • ASTM D6120 : Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at RoomTemperature

  • ASTM D6120-97R02 : Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

  • ASTM D6121-04 : Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

  • ASTM D6122 : Practice for Validation of Multivariate Process Infrared Spectrophotometers

  • ASTM D6122-01 : Practice for Validation of Multivariate Process Infrared Spectrophotometers

  • ASTM D6123/D6123M : Specification for Pressure Sensitive Tape for Light Duty Packaging and General PurposeMasking

  • ASTM D6123/D6123M-97R03 : Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking

  • ASTM D6124 : Test Method for Residual Powder on Medical Gloves

  • ASTM D6124-01 : Test Method for Residual Powder on Medical Gloves

  • ASTM D6125 : Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)

  • ASTM D6125-97R02 : Test Method for Bending Resistance of Paper and Paperboard (Gurley Type Tester)

  • ASTM D6126 : Specification for HFC 23 (Trifluoromethane, CHF3)

  • ASTM D6126-97R03E01 : Specification for HFC-23 (Trifluoromethane, CHF)

  • ASTM D6127 : Practice for Handling, Transportation, and Storage of HFC 23 (Trifluoromethane, CHF3)

  • ASTM D6127-03 : Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)

  • ASTM D6128 : Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

  • ASTM D6128-00 : Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

  • ASTM D6129 : Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

  • ASTM D6129-97R02 : Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

  • ASTM D6130 : Test Method for Determination of Silicon and Other Elements in Engine Coolant byInductively Coupled Plasma Atomic Emission Spectroscopy

  • ASTM D6130-97AR03 : Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

  • ASTM D6131 : Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments

  • ASTM D6131-97R04 : Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments

  • ASTM D6132 : Test Method for Nondestructive Measurement of Dry Film Thickness of Applied OrganicCoatings Using an Ultrasonic Gage

  • ASTM D6132-04 : Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage

  • ASTM D6133 : Test Method for Acetone, p Chlorobenzotrifluoride, Methyl Acetate or t Butyl AcetateContent of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by DirectInjection Into a Gas Chromatograph

  • ASTM D6133-02 : Test Method for Acetone, -Chlorobenzotrifluoride, Methyl Acetate or -Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph

  • ASTM D6134-97 : Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

  • ASTM D6135 : Practice for Application of Self Adhering Modified Bituminous Waterproofing

  • ASTM D6135-97 : Practice for Application of Self-Adhering Modified Bituminous Waterproofing

  • ASTM D6136 : Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method

  • ASTM D6136-97R04E01 : Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

  • ASTM D6137 : Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas DesulfurizationSystems

  • ASTM D6137-97R04 : Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems

  • ASTM D6138 : Test Method for Determination of Corrosion Preventive Properties of Lubricating GreasesUnder Dynamic Wet Conditions (Emcor Test)

  • ASTM D6138-03 : Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

  • ASTM D6139 : Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or TheirComponents Using the Gledhill Shake Flask

  • ASTM D6139-00 : Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

  • ASTM D6140 : Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving forFull Width Applications

  • ASTM D6140-00 : Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

  • ASTM D6141 : Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibilityto Liquids

  • ASTM D6141-97R04 : Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids

  • ASTM D6142 : Test Method for Analysis of Phenol by Capillary Gas Chromatography

  • ASTM D6142-03 : Test Method for Analysis of Phenol by Capillary Gas Chromatography

  • ASTM D6143-05 : Test Method for Iron Content of Bisphenol A (4,4` – Isopropylidenediphenol)

  • ASTM D6144-04 : Test Method for Analysis of AMS (|ga-Methylstyrene) by Capillary Gas Chromatography

  • ASTM D6145 : Guide for Monitoring Sediment in Watersheds

  • ASTM D6145-97R02 : Guide for Monitoring Sediment in Watersheds

  • ASTM D6146 : Guide for Monitoring Aqueous Nutrients in Watersheds

  • ASTM D614-67 : Method of Test for Knock Characteristics of Aviation Fuels by the Aviation Method (Withdrawn 1970)

  • ASTM D6146-97R02 : Guide for Monitoring Aqueous Nutrients in Watersheds

  • ASTM D6147 : Test Method for Vulcanized Rubber and Thermoplastic Elastomer/Determination of Force Decay(Stress Relaxation) in Compression

  • ASTM D6147-97R02 : Test Method for Vulcanized Rubber and Thermoplastic Elastomer\MDetermination of Force Decay (Stress Relaxation) in Compression

  • ASTM D6148 : Practice for the Separation and Examination of Stickies

  • ASTM D6148-97R02 : Practice for the Separation and Examination of Stickies

  • ASTM D6149 : Specification for Newsprint Including Newsprint Manufactured from Recycled Fiber(Withdrawn 2003) No Replacement

  • ASTM D6149-97 : Specification for Newsprint Including Newsprint Manufactured from Recycled Fiber (Withdrawn 2003)

  • ASTM D615- : Specification for Aviation Gasolines (Withdrawn 1943)

  • ASTM D6150 : Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

  • ASTM D6150-97R03 : Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

  • ASTM D6151 : Practice for Using Hollow Stem Augers for Geotechnical Exploration and Soil Sampling

  • ASTM D6151-97R03 : Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

  • ASTM D6152 : Specification for SEBS Modified Mopping Asphalt Used in Roofing

  • ASTM D6152-99 : Specification for SEBS-Modified Mopping Asphalt Used in Roofing

  • ASTM D6153 : Specification for Materials for Bridge Deck Waterproofing Membrane Systems

  • ASTM D6153-97R03 : Specification for Materials for Bridge Deck Waterproofing Membrane Systems

  • ASTM D6154-04 : Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

  • ASTM D6155 : Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

  • ASTM D6155-01 : Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

  • ASTM D6156 : Practice for Use of Reversed Phase High Performance Liquid Chromatographic Systems

  • ASTM D6156-97 : Practice for Use of Reversed-Phase High Performance Liquid Chromatographic Systems

  • ASTM D6157 : Practice for Determining the Performance of Oil/Water Separators Subjected to a SuddenRelease

  • ASTM D6157-97R03 : Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release

  • ASTM D6158 : Specification for Mineral Hydraulic Oils

  • ASTM D6158-99 : Specification for Mineral Hydraulic Oils

  • ASTM D6159 : Test Method for Determination of Hydrocarbon Impurities in Ethylene by GasChromatography

  • ASTM D6159-97R02 : Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

  • ASTM D616- : Specification for Laminated Thermosettings Materials (Withdrawn 1950)

  • ASTM D6160 : Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials byGas Chromatography

  • ASTM D6160-98R03E01 : Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

  • ASTM D6161-98 : Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes

  • ASTM D6162 : Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet MaterialsUsing a Combination of Polyester and Glass Fiber Reinforcements

  • ASTM D6162-00A : Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

  • ASTM D6163 : Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet MaterialsUsing Glass Fiber Reinforcements

  • ASTM D6163-00E01 : Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

  • ASTM D6164 : Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet MaterialsUsing Polyester Reinforcements

  • ASTM D6164-00 : Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

  • ASTM D6165 : Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, andRelated Materials

  • ASTM D6165-97R03 : Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials

  • ASTM D6166 : Test Method for Color of Naval Stores and Related Products (Instrumental Determination ofGardner Color)

  • ASTM D6166-97R03 : Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color)

  • ASTM D6167 : Guide for Conducting Borehole Geophysical Logging : Mechanical Caliper

  • ASTM D6167-97R04 : Guide for Conducting Borehole Geophysical Logging : Mechanical Caliper

  • ASTM D6168 : Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosenfor Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

  • ASTM D6168-97R04 : Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

  • ASTM D6169 : Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs forEnvironmental Investigations

  • ASTM D6169-98 : Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

  • ASTM D617 : Test Method for Punching Quality of Phenolic Laminated Sheets (Withdrawn 2003) NoReplacement

  • ASTM D6170 : Guide for Selecting a Ground Water Modeling Code

  • ASTM D6170-97R04 : Guide for Selecting a Ground-Water Modeling Code

  • ASTM D6171 : Guide for Documenting a Ground Water Modeling Code

  • ASTM D6171-97R04 : Guide for Documenting a Ground-Water Modeling Code

  • ASTM D6172 : Test Method for Determining the Volume of Bulk Materials Using Contours or Cross SectionsCreated by Direct Operator Compilation Using Photogrammetric Procedures

  • ASTM D6172-98R04 : Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures

  • ASTM D6173 : Test Method for Determination of Various Anionic Surfactant Actives by PotentiometricTitration

  • ASTM D6173-97R05 : Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration

  • ASTM D6174 : Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration

  • ASTM D6174-01 : Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration

  • ASTM D6175 : Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

  • ASTM D6175-03 : Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

  • ASTM D6176 : Practice for Measuring Surface Atmospheric Temperature with Electrical ResistanceTemperature Sensors

  • ASTM D6176-97R03 : Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors

  • ASTM D6177 : Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted fromBedding Sets

  • ASTM D6177-97R03 : Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets

  • ASTM D6178 : Practice for Estimation of Short Term Inhalation Exposure to Volatile Organic ChemicalsEmitted from Bedding Sets

  • ASTM D617-84(1998) : Test Method for Punching Quality of Phenolic Laminated Sheets (Withdrawn 2003)

  • ASTM D6178-97R03 : Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

  • ASTM D6179 : Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates

  • ASTM D6179-97R03 : Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates

  • ASTM D618 : Practice for Conditioning Plastics for Testing

  • ASTM D6180 : Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge

  • ASTM D6180-98R04 : Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge

  • ASTM D6181 : Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin

  • ASTM D6181-03 : Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin

  • ASTM D6182 : Test Method for Flexibility and Adhesion of Finish on Leather

  • ASTM D6182-00R05 : Test Method for Flexibility and Adhesion of Finish on Leather

  • ASTM D6183 : Test Method for Tackiness of Finish on Leather

  • ASTM D6183-00R05 : Test Method for Tackiness of Finish on Leather

  • ASTM D6184 : Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

  • ASTM D6184-98 : Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

  • ASTM D6185 : Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

  • ASTM D6185-97R02E01 : Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

  • ASTM D6186-98R03E01 : Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

  • ASTM D6187 : Practice for Cone Penetrometer Technology Characterization of Petroleum ContaminatedSites with Nitrogen Laser Induced Fluorescence

  • ASTM D6187-97R03 : Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

  • ASTM D6188 : Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall

  • ASTM D6188-97R03 : Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall

  • ASTM D6189 : Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

  • ASTM D6189-97R03 : Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

  • ASTM D619 : Test Methods for Vulcanized Fibre Used for Electrical Insulation

  • ASTM D6190-97 : Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial (Withdrawn 2001)

  • ASTM D6191 : Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air DryCoatings

  • ASTM D6191-97R03 : Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings

  • ASTM D6192 : Tables of Body Measurements for Girls, Sizes 7 to 16

  • ASTM D6192-98R04 : Tables of Body Measurements for Girls, Sizes 7 to 16

  • ASTM D6193 : Practice for Stitches and Seams

  • ASTM D6193-97R04 : Practice for Stitches and Seams

  • ASTM D6194-04 : Test Method for Glow-Wire Ignition of Materials

  • ASTM D6195 : Test Methods for Loop Tack

  • ASTM D6195-03 : Test Methods for Loop Tack

  • ASTM D6196 : Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Proceduresfor Volatile Organic Compounds in Air

  • ASTM D6196-03 : Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air

  • ASTM D6197 : Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests

  • ASTM D6197-99R05 : Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests

  • ASTM D6198 : Guide for Transport Packaging Design

  • ASTM D6198-01E01 : Guide for Transport Packaging Design

  • ASTM D6199 : Practice for Quality of Wood Members of Containers and Pallets

  • ASTM D6199-97E01 : Practice for Quality of Wood Members of Containers and Pallets

  • ASTM D6200 : Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling CurveAnalysis

  • ASTM D6200-01 : Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

  • ASTM D6201 : Test Method for Dynamometer Evaluation of Unleaded Spark Ignition Engine Fuel for IntakeValve Deposit Formation

  • ASTM D6201-04 : Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

  • ASTM D6202 : Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and LightDuty Trucks in the Sequence VIA Spark Ignition Engine

  • ASTM D6202-02 : Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine

  • ASTM D6203 : Test Method for Thermal Stability of Way Lubricants

  • ASTM D6203-97R01 : Test Method for Thermal Stability of Way Lubricants

  • ASTM D6204 : Test Method for Rubber/Measurement of Unvulcanized Rheological Properties UsingRotorless Shear Rheometers

  • ASTM D6204-04 : Test Method for Rubber\MMeasurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

  • ASTM D6205 : Practice for Calibration of the James Static Coefficient of Friction Machine

  • ASTM D620-57 : Method of Test for Color Fastness of Plastics to Light (Withdrawn 1964)

  • ASTM D6205-98 : Practice for Calibration of the James Static Coefficient of Friction Machine

  • ASTM D6206 : Practice for Sampling of Coating Films

  • ASTM D6206-03 : Practice for Sampling of Coating Films

  • ASTM D6207 : Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature

  • ASTM D6207-03 : Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature

  • ASTM D6208 : Test Method for Repassivation Potential of Aluminum and Its Alloys by GalvanostaticMeasurement

  • ASTM D6208-97R02 : Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

  • ASTM D6209 : Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbonsin Ambient Air (Collection on Sorbent Backed Filters with Gas Chromatographic/Mass SpectrometricAnalysis)

  • ASTM D6209-98R04 : Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)

  • ASTM D6210 : Specification for Fully Formulated Glycol Base Engine Coolant for Heavy Duty Engines

  • ASTM D6210-04 : Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

  • ASTM D6211 : Specification for Fully-Formulated Propylene Glycol-Base Engine Coolant for Heavy-Duty Engines

  • ASTM D6211-98a : Specification for Fully-Formulated Propylene-Glycol-Base Engine Coolant for Heavy-Duty Engines (Withdrawn 2003)

  • ASTM D6212 : Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and RateometricColorimetry

  • ASTM D6212-99 : Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry

  • ASTM D6213 : Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

  • ASTM D6213-97R03 : Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

  • ASTM D6214 : Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes byChemical Fusion Methods

  • ASTM D6214-98R03 : Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods

  • ASTM D6215 : Guide for Removal of Oily Soils from Metal Surfaces (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM D6215-98a : Guide for Removal of Oily Soils from Metal Surfaces (Withdrawn 2004)

  • ASTM D6216 : Practice for Opacity Monitor Manufacturers to Certify Conformance with Design andPerformance Specifications

  • ASTM D6216-03 : Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

  • ASTM D621-64(1988) : Test Methods for Deformation of Plastics Under Load (Withdrawn 1994)

  • ASTM D6217-98R03E01 : Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

  • ASTM D622 : Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System

  • ASTM D6221 : Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

  • ASTM D6221-00 : Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

  • ASTM D6222 : Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials UsingPolyester Reinforcements

  • ASTM D6222-02 : Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

  • ASTM D6223 : Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using aCombination of Polyester and Glass Fiber Reinforcements

  • ASTM D6223-02 : Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

  • ASTM D6224 : Practice for In Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

  • ASTM D6224-02 : Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

  • ASTM D6225 : Test Method for Granule Cover of Mineral Surfaced Roofing

  • ASTM D6225-98R04 : Test Method for Granule Cover of Mineral Surfaced Roofing

  • ASTM D6226 : Test Method for Open Cell Content of Rigid Cellular Plastics

  • ASTM D6226-98E01 : Test Method for Open Cell Content of Rigid Cellular Plastics

  • ASTM D6227-04A : Specification for Grade 82 Unleaded Aviation Gasoline

  • ASTM D6228 : Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels byGas Chromatography and Flame Photometric Detection

  • ASTM D6228-98R03 : Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

  • ASTM D6229 : Test Method for Trace Benezene in Hydrocarbon Solvents by Capillary Gas Chromatography

  • ASTM D6229-01 : Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

  • ASTM D623 : Test Methods for Rubber Property Heat Generation and Flexing Fatigue In Compression

  • ASTM D6230 : Test Method for Monitoring Ground Movement Using Probe Type Inclinometers

  • ASTM D6230-98 : Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

  • ASTM D6231 : Specification for HFC 125 (Pentafluoroethane, C2HF5)

  • ASTM D6231-98R03 : Specification for HFC-125 (Pentafluoroethane, CHF)

  • ASTM D6232 : Guide for Selection of Sampling Equipment for Waste and Contaminated Media DataCollection Activities

  • ASTM D6232-03 : Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

  • ASTM D6233 : Guide for Data Assessment for Environmental Waste Management Activities

  • ASTM D6233-98R03 : Guide for Data Assessment for Environmental Waste Management Activities

  • ASTM D6234 : Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation LeachingProcedure

  • ASTM D6234-98R02 : Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure

  • ASTM D6235 : Practice for Expedited Site Characterization of Vadose Zone and Ground WaterContamination at Hazardous Waste Contaminated Sites

  • ASTM D6235-04 : Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites

  • ASTM D6236 : Guide for Coring and Logging Cement or Lime Stabilized Soil

  • ASTM D6236-98R04 : Guide for Coring and Logging Cement – or Lime-Stabilized Soil

  • ASTM D6237 : Guide for Painting Inspectors (Concrete and Masonry Substrates)

  • ASTM D6237-03 : Guide for Painting Inspectors (Concrete and Masonry Substrates)

  • ASTM D6238 : Test Method for Total Oxygen Demand in Water

  • ASTM D6238-98R03 : Test Method for Total Oxygen Demand in Water

  • ASTM D6239 : Test Method for Uranium in Drinking Water by High Resolution Alpha Liquid ScintillationSpectrometry

  • ASTM D6239-03 : Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry

  • ASTM D624 : Test Method for Tear Strength of Conventional Vulcanized Rubber and ThermoplasticElastomers

  • ASTM D6240 : Tables of Body Measurements for Men Sizes Thirty Four to Sixty (34 to 60) Regular

  • ASTM D6240-98 : Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular

  • ASTM D6241 : Test Method for the Static Puncture Strength of Geotextiles and Geotextile Related ProductsUsing a 50 mm Probe

  • ASTM D6241-04 : Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

  • ASTM D6242 : Test Method for Mass Unit Area of Nonwoven Fabrics

  • ASTM D6242-98R04 : Test Method for Mass Unit Area of Nonwoven Fabrics

  • ASTM D6243 : Test Method for Determining the Internal and Interface Shear Resistance of GeosyntheticClay Liner by the Direct Shear Method

  • ASTM D6243-98 : Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

  • ASTM D6244 : Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

  • ASTM D6244-98R04 : Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

  • ASTM D6245 : Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality andVentilation

  • ASTM D6245-98R02 : Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

  • ASTM D6246 : Practice for Evaluating the Performance of Diffusive Samplers

  • ASTM D6246-02 : Practice for Evaluating the Performance of Diffusive Samplers

  • ASTM D6247 : Test Method for Analysis of Elemental Content in Polyolefins By X Ray FluorescenceSpectrometry

  • ASTM D6247-98R04 : Test Method for Analysis of Elemental Content in Polyolefins By X-ray Fluorescence Spectrometry

  • ASTM D6248 : Test Method for Vinyl and Trans Unsaturation in Polyethylene by InfraredSpectrophotometry

  • ASTM D6248-98R04 : Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

  • ASTM D6249 : Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

  • ASTM D6249-98R04 : Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

  • ASTM D625- : Specification for Medium-Weight Cotton Corduroy Fabrics (Withdrawn 1948)

  • ASTM D6250 : Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of MeanConcentration in Waste Management Decisions

  • ASTM D6250-98R03 : Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions

  • ASTM D6251/D6251M : Specification for Wood Cleated Panelboard Shipping Boxes

  • ASTM D6251/D6251M-01 : Specification for Wood-Cleated Panelboard Shipping Boxes

  • ASTM D6252/D6252M : Test Method for Peel Adhesion of Pressure Sensitive Label Stocks at a 90° Angle

  • ASTM D6252/D6252M-98R04 : Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90|SD Angle

  • ASTM D6253 : Practice for Treatment and/or Marking of Wood Packaging Materials

  • ASTM D6253-98 : Practice for Marking of Pallets

  • ASTM D6254/D6254M : Specification for Wirebound Pallet Type Wood Boxes

  • ASTM D6254/D6254M-99 : Specification for Wirebound Pallet-Type Wood Boxes

  • ASTM D6255/D6255M : Specification for Steel or Aluminum Slotted Angle Crates

  • ASTM D6255/D6255M-99 : Specification for Steel or Aluminum Slotted Angle Crates

  • ASTM D6256/D6256M : Specification for Wood Cleated Shipping Boxes and Skidded, Load Bearing Bases

  • ASTM D6256/D6256M-99 : Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases

  • ASTM D6257-98 : Specification for Prediluted Aqueous Propylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2000)

  • ASTM D6258-04 : Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

  • ASTM D6259 : Practice for Determination of a Pooled Limit of Quantitation

  • ASTM D6259-98R04 : Practice for Determination of a Pooled Limit of Quantitation

  • ASTM D6260 : Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) (Withdrawn 2004) No Replacement

  • ASTM D6260-98 : Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) (Withdrawn 2004)

  • ASTM D6261 : Specification for Extruded and Compression Molded Basic Shapes Made from ThermoplasticPolyester (TPES)

  • ASTM D6261-98R03 : Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

  • ASTM D6262 : Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes ofPoly(aryl ether ketone) (PAEK)

  • ASTM D6262-98R03 : Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

  • ASTM D6263 : Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) andChlorinated Poly(Vinyl Chloride) (CPVC)

  • ASTM D6263-98R03 : Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

  • ASTM D6264 : Test Method for Measuring the Damage Resistance of a Fiber Reinforced Polymer MatrixComposite to a Concentrated Quasi Static Indentation Force

  • ASTM D6264-98R04 : Test Method for Measuring Damage Resistance of Fiber-Reinforced Polymer-Matrix Composite to Concentrated Quasi-Static Indentation Force

  • ASTM D6265 : Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

  • ASTM D626-55 : Specification for Fire-Retardant Properties of Treated Textile Fabrics (Withdrawn 1968)

  • ASTM D6265-98R03 : Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

  • ASTM D6266 : Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released FromWaterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

  • ASTM D6266-00AR05 : Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

  • ASTM D6267 : Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

  • ASTM D6267-05 : Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

  • ASTM D6268 : Practice for Handling, Transportation, and Storage of HFC 125, Pentafluoroethane (C2HF5)

  • ASTM D6268-98R03 : Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (CHF)

  • ASTM D6269 : Test Method for Solidification Point of -Xylene

  • ASTM D6269-98e1 : Test Method for Solidification Point of p-Xylene (Withdrawn 2004)

  • ASTM D6270 : Practice for Use of Scrap Tires in Civil Engineering Applications

  • ASTM D6270-98R04 : Practice for Use of Scrap Tires in Civil Engineering Applications

  • ASTM D6271 : Test Method for Estimating Contribution of Environmental Tobacco Smoke to RespirableSuspended Particles Based on Solanesol

  • ASTM D6271-04 : Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol

  • ASTM D6272 : Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and ElectricalInsulating Materials by Four Point Bending

  • ASTM D6272-02 : Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

  • ASTM D6273 : Test Methods for Natural Gas Odor Intensity

  • ASTM D6273-98R03 : Test Methods for Natural Gas Odor Intensity

  • ASTM D6274 : Guide for Conducting Borehole Geophysical Logging Gamma

  • ASTM D627-49(1955) : Methods of Test for Evaluating Compounds Designed to Increase Resistance of Fabrics and Yarns to Insect Pets (Withdrawn 1957)

  • ASTM D6274-98R04 : Guide for Conducting Borehole Geophysical Logging – Gamma

  • ASTM D6275 : Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM D6275-98(2003) : Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004)

  • ASTM D6276 : Test Method for Using pH to Estimate the Soil Lime Proportion Requirement for SoilStabilization

  • ASTM D6276-99A : Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

  • ASTM D6277 : Test Method for Determination of Benzene in Spark Ignition Engine Fuels Using Mid InfraredSpectroscopy

  • ASTM D6277-01 : Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

  • ASTM D6278 : Test Method for Shear Stability of Polymer Containing Fluids Using a European DieselInjector Apparatus

  • ASTM D6278-02 : Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

  • ASTM D6279 : Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

  • ASTM D6279-03 : Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

  • ASTM D628 : Specification for Asbestos Tubular Sleeving

  • ASTM D6280 : Specification for Zinc Phosphate Pigments

  • ASTM D6280-98R03 : Specification for Zinc Phosphate Pigments

  • ASTM D6281 : Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres asDetermined by Transmission Electron Microscopy Direct Transfer (TEM)

  • ASTM D6281-04 : Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

  • ASTM D6282 : Guide for Direct Push Soil Sampling for Environmental Site Characterizations

  • ASTM D6282-98 : Guide for Direct Push Soil Sampling for Environmental Site Characterizations

  • ASTM D6283 : Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings

  • ASTM D6283-05 : Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings

  • ASTM D6284 : Test Method for Rubber Property/Effect of Aqueous Solutions with Available Chlorine andChloramine

  • ASTM D6284-02 : Test Method for Rubber Property\MEffect of Aqueous Solutions with Available Chlorine and Chloramine

  • ASTM D6285 : Guide for Locating Abandoned Wells

  • ASTM D6285-99 : Guide for Locating Abandoned Wells

  • ASTM D6286 : Guide for Selection of Drilling Methods for Environmental Site Characterization

  • ASTM D6286-98 : Guide for Selection of Drilling Methods for Environmental Site Characterization

  • ASTM D6287 : Practice for Cutting Film and Sheeting Test Specimens

  • ASTM D6287-05 : Practice for Cutting Film and Sheeting Test Specimens

  • ASTM D6288 : Practice for Separation and Washing of Recycled Plastics Prior to Testing

  • ASTM D6288-98R03 : Practice for Separation and Washing of Recycled Plastics Prior to Testing

  • ASTM D6289 : Test Method for Measuring Shrinkage from Mold Dimensions of Molded ThermosettingPlastics

  • ASTM D6289-03 : Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

  • ASTM D629 : Test Methods for Quantitative Analysis of Textiles

  • ASTM D6290 : Test Method for Color Determination of Plastic Pellets

  • ASTM D6290-98E01 : Test Method for Color Determination of Plastic Pellets

  • ASTM D6293 : Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O PONA)

  • ASTM D6293-98R03E01 : Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic(O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography

  • ASTM D6294 : Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofingand Waterproofing

  • ASTM D6294-98R03 : Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

  • ASTM D6295/D6295M : Test Method for Dispensability of Light Duty Pressure Sensitive Film Tape

  • ASTM D6295/D6295M-98R04 : Test Method for Dispensability of Light\NDuty Pressure\NSensitive Film Tape

  • ASTM D6296 : Test Method for Total Olefins in Spark Ignition Engine Fuels by Multi dimensional GasChromatography

  • ASTM D6296-98R03E01 : Test Method for Total Olefins in Spark-ignition Engine Fuels by Multi-dimensional Gas Chromatography

  • ASTM D6297 : Specification for Asphaltic Plug Joints for Bridges

  • ASTM D6297-01 : Specification for Asphaltic Plug Joints for Bridges

  • ASTM D6298 : Specification for Fiberglass Reinforced Styrene Butadiene Styrene (SBS) Modified BituminousSheets with a Factory Applied Metal Surface

  • ASTM D6298-00 : Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

  • ASTM D6299-02 : Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance

  • ASTM D63- : Specification for Standard Sizes of Coarse Aggregate for Highway Construction (Withdrawn 1937)

  • ASTM D6300 : An American National Standard Standard Practice for Determination of Precision and Bias Data for Use

  • ASTM D6300-04 : Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

  • ASTM D6301-03 : Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water

  • ASTM D6302 : Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins

  • ASTM D6302-98R04 : Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins

  • ASTM D6303 : Test Method for Formaldehyde in Water

  • ASTM D6303-98 : Test Method for Formaldehyde in Water

  • ASTM D6304 : Test Method for Determination of Water in Petroleum Products, Lubricating Oils, andAdditives by Coulometric Karl Fisher Titration

  • ASTM D6304-04A : Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

  • ASTM D6305 : Practice for Calculating Bending Strength Design Adjustment Factors for Fire RetardantTreated Plywood Roof Sheathing

  • ASTM D6305-02E01 : Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

  • ASTM D6306 : Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air

  • ASTM D6306-98R03 : Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air

  • ASTM D6307 : Test Method for Asphalt Content of Hot Mix Asphalt by Ignition Method

  • ASTM D6307-04 : Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method

  • ASTM D630-74 : Specification for Olive Oil Chip Soap (Type A, Straight; Type B, Blended) (Withdrawn 1979)

  • ASTM D6308-92 : Guide for Identification of Composite Materials in Computerized Material Property Databases. (Withdrawn 1999)

  • ASTM D6311 : Guide for Generation of Environmental Data Related to Waste Management Activities :

  • ASTM D6311-98R03 : Guide for Generation of Environmental Data Related to Waste Management Activities : Selection and Optimization of Sampling Design

  • ASTM D6312 : Guide for Developing Appropriate Statistical Approaches for Ground Water DetectionMonitoring Programs

  • ASTM D6312-98 : Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs

  • ASTM D6313 : Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific DifferencePhotometry

  • ASTM D6313-99 : Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry

  • ASTM D6314 : Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and ExtrusionMaterials (Withdrawn 2002) Replaced by D3307

  • ASTM D631-46 : Specification for Emulsified Asphalt (Withdrawn 1949)

  • ASTM D6314-98 : Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002)

  • ASTM D6315 : Practice for Manual Sampling of Coal from Tops of Barges (Withdrawn 2003) Replaced byD6883

  • ASTM D6315-98e1 : Practice for Manual Sampling of Coal from Tops of Barges (Withdrawn 2003)

  • ASTM D6316 : Test Method for Determination of Total, Combustible and Carbonate Carbon in SolidResidues from Coal and Coke

  • ASTM D6316-04 : Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

  • ASTM D6317 : Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and OrganicCarbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

  • ASTM D6317-98R04 : Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

  • ASTM D6318 : Practice for Calibrating a Fathometer Using a Bar Check Method

  • ASTM D6318-03 : Practice for Calibrating a Fathometer Using a Bar Check Method

  • ASTM D6319 : Specification for Nitrile Examination Gloves for Medical Application

  • ASTM D6319-00AE03 : Specification for Nitrile Examination Gloves for Medical Application

  • ASTM D632 : Specification for Sodium Chloride

  • ASTM D6320 : Test Methods for Single Filament Hose Reinforcing Wire Made from Steel

  • ASTM D6320-04 : Test Methods for Single Filament Hose Reinforcing Wire Made from Steel

  • ASTM D6321 : Practice for the Evaluation of Machine Washable T Shirts

  • ASTM D6321-98R04 : Practice for the Evaluation of Machine Washable T-Shirts

  • ASTM D6322 : Guide to International Test Methods Associated with Textile Care Procedures

  • ASTM D6322-00E01 : Guide to International Test Methods Associated with Textile Care Procedures

  • ASTM D6323 : Guide for Laboratory Subsampling of Media Related to Waste Management Activities

  • ASTM D6323-98R03 : Guide for Laboratory Subsampling of Media Related to Waste Management Activities

  • ASTM D6324-99AR04 : Test Methods for Male Condoms Made from Synthetic Materials

  • ASTM D6325 : Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

  • ASTM D6325-98R04 : Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

  • ASTM D6326 : Practice for The Selection of Maximum Transit Rate Ratios and Depths for the U.S. Series ofIsokinetic Suspended Sediment Samplers

  • ASTM D6326-98R03 : Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers

  • ASTM D6327 : Test Method for Determination of Radon Decay Product Concentration and Working Level inIndoor Atmospheres by Active Sampling on a Filter

  • ASTM D6327-98R04 : Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

  • ASTM D6328 : Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition

  • ASTM D6328-98 : Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition

  • ASTM D6329 : Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to SupportMicrobial Growth Using Static Environmental Chambers

  • ASTM D6329-98R03 : Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers

  • ASTM D633 : Volume Correction Table for Road Tar

  • ASTM D6330 : Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde)

  • ASTM D6330-98R03 : Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

  • ASTM D6331 : Test Method for Determination of Mass Concentration of Particulate Matter from StationarySources at Low Concentrations (Manual Gravimetric Method)

  • ASTM D6331-98R05 : Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)

  • ASTM D6332 : Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectorsto Gases and Vapors

  • ASTM D6332-99R05 : Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors

  • ASTM D6333 : Practice for Collection of Dislodgeable Pesticide Residues from Floors

  • ASTM D6333-98R04E01 : Practice for Collection of Dislodgeable Pesticide Residues from Floors

  • ASTM D6334 : Test Method for Sulfur in Gasoline by Wavelength Dispersive X Ray Fluorescence

  • ASTM D6334-98R03E01 : Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

  • ASTM D6335 : Test Method for Determination of High Temperature Deposits by Thermo Oxidation EngineOil Simulation Test

  • ASTM D6335-03B : Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

  • ASTM D6336 : Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

  • ASTM D6336-98R04 : Practice for Evaluation of Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

  • ASTM D6337 : Practice for Physical Characterization of Woven Paint Applicator Fabrics

  • ASTM D6337-98R03E01 : Practice for Physical Characterization of Woven Paint Applicator Fabrics

  • ASTM D6338 : Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)

  • ASTM D6338-03 : Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs)

  • ASTM D6339-05 : Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)

  • ASTM D6340 : Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in anAqueous or Compost Environment

  • ASTM D6340-98 : Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment

  • ASTM D6341 : Test Method for Determination of the Linear Coefficient of Thermal Expansion of PlasticLumber and Plastic Lumber Shapes Between 30 and 140°F ( 34.4 and 60°C)

  • ASTM D6341-98 : Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between \N30 and 140|SDF (\N34.4 and 60|SDC)

  • ASTM D6342 : Practice for Polyurethane Raw Materials : Determining Hydroxyl Number of Polyols by NearInfrared (NIR) Spectroscopy

  • ASTM D6342-98R03 : Practice for Polyurethane Raw Materials : Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

  • ASTM D6343-99R04 : Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

  • ASTM D6344 : Test Method for Concentrated Impacts to Transport Packages

  • ASTM D6344-04 : Test Method for Concentrated Impacts to Transport Packages

  • ASTM D634-44 : Methods of Test for Product Uniformity of Phenolic Laminated Sheets (Withdrawn 1962)

  • ASTM D6345 : Guide for Selection of Methods for Active, Integrative Sampling of Volatile OrganicCompounds in Air

  • ASTM D6345-98R04E01 : Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

  • ASTM D6346 : Guide for Accepting, Segregating and Packaging Materials Collected Through HouseholdHazardous Waste Programs

  • ASTM D6346-98R04 : Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs

  • ASTM D6347/D6347M : Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter DepthDensity Methods

  • ASTM D6347/D6347M-05 : Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods

  • ASTM D6348 : Test Method for Determination of Gaseous Compounds by Extractive Direct Interface FourierTransform Infrared (FTIR) Spectroscopy

  • ASTM D6348-03 : Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy

  • ASTM D6349 : Test Method for Determination of Major and Minor Elements in Coal, Coke, and SolidResidues from Combustion of Coal and Coke by Inductively Coupled Plasma/Atomic EmissionSpectrometry

  • ASTM D6349-01 : Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma\MAtomic Emission Spectrometry

  • ASTM D635 : Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in aHorizontal Position

  • ASTM D6350 : Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic FluorescenceSpectroscopy

  • ASTM D6350-98R03 : Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

  • ASTM D6351 : Test Method for Determination of Low Temperature Fluidity and Appearance of HydraulicFluids

  • ASTM D6351-99 : Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

  • ASTM D6352 : Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from174 to 700°C by Gas Chromatography

  • ASTM D6352-04E01 : Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700|SDC by Gas Chromatography

  • ASTM D6353 : Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in AluminumProduction

  • ASTM D6353-98R03 : Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

  • ASTM D6354 : Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in AluminumProduction

  • ASTM D6354-98R03 : Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

  • ASTM D6355 : Test Method for Human Repeat Insult Patch Testing of Medical Gloves

  • ASTM D6355-98R03 : Test Method for Human Repeat Insult Patch Testing of Medical Gloves

  • ASTM D6356 : Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as aProtective Coating for Roofing

  • ASTM D6356-98R04 : Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

  • ASTM D6357 : Test Methods for Determination of Trace Elements in Coal, Coke, andCombustion Residuesfrom Coal Utilization Processes byInductively Coupled Plasma Atomic EmissionSpectrometry,Inductively Coupled Plasma Mass Spectrometry, andGraphite Furnace At

  • ASTM D6357-04 : Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma

  • ASTM D6358-99 : Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods

  • ASTM D6359 : Specification for Minimum Retroreflectance of Newly Applied Pavement Marking UsingPortable Hand Operated Instruments

  • ASTM D6359-99 : Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments

  • ASTM D6360 : Practice for Enclosed Carbon Arc Exposures of Plastics

  • ASTM D6360-99 : Practice for Enclosed Carbon-Arc Exposures of Plastics

  • ASTM D6361 : Guide for Selecting Cleaning Agents and Processes

  • ASTM D6361-98R04E01 : Guide for Selecting Cleaning Agents and Processes

  • ASTM D6362 : Practice for Certificates of Reference Materials for Water Analysis

  • ASTM D6362-98R03 : Practice for Certificates of Reference Materials for Water Analysis

  • ASTM D6363 : Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides inAtmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

  • ASTM D6363-98R03E01 : Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

  • ASTM D6364 : Test Method for Determining the Short Term Compression Behavior of Geosynthetics

  • ASTM D6364-99R04 : Test Method for Determining Short-Term Compression Behavior of Geosynthetics

  • ASTM D6365 : Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test

  • ASTM D636-54(1955) : Method of Test for Diffusion of Light by Plastics (Withdrawn 1959)

  • ASTM D6365-99 : Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test

  • ASTM D6366 : Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbonsby Oxidative Combustion and Electrochemical Detection (Withdrawn 2006) No Replacement

  • ASTM D6366-99 : Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection

  • ASTM D6367-04 : Specification for AMS (|ga-Methylstyrene)

  • ASTM D6368 : Specification for Vapor Degreasing Solvents Based on normal Propyl Bromide and TechnicalGrade normal Propyl Bromide

  • ASTM D6368-05 : Specification for Vapor-Degreasing Grade and General Grade -Propyl Bromide

  • ASTM D6369 : Guide for Design of Standard Flashing Details for EPDM Roof Membranes

  • ASTM D6369-99 : Guide for Design of Standard Flashing Details for EPDM Roof Membranes

  • ASTM D6370 : Test Method for Rubber Compositional Analysis by Thermogravimetry (TGA)

  • ASTM D6370-99R03 : Test Method for Rubber\MCompositional Analysis by Thermogravimetry (TGA)

  • ASTM D6371 : Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

  • ASTM D6371-99 : Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

  • ASTM D6372 : Practice for Design, Testing, and Construction of Micro Surfacing

  • ASTM D6372-05 : Practice for Design, Testing, and Construction of Micro-Surfacing

  • ASTM D6373-99 : Specification for Performance Graded Asphalt Binder

  • ASTM D6374 : Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

  • ASTM D6374-99R04 : Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

  • ASTM D6375-99A : Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

  • ASTM D6376 : Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength DispersiveX Ray Fluorescence Spectroscopy

  • ASTM D6376-99 : Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

  • ASTM D6377 : Test Method for Determination of Vapor Pressure of Crude Oil : VPCRx (Expansion Method)

  • ASTM D6377-03 : Test Method for Determination of Vapor Pressure of Crude Oil : VPCR (Expansion Method)

  • ASTM D6378 : Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products,

  • ASTM D6378-03 : Test Method for Determination of Vapor Pressure (VP) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

  • ASTM D637-90 : Test Method for Surface Irregularities of Flat Transparent Plastic Sheets (Withdrawn 1995)

  • ASTM D6379-04 : Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates\MHigh Performance Liquid Chromatography Method with Refractive Index Detection

  • ASTM D638 : Test Method for Tensile Properties of Plastics

  • ASTM D6380 : Specification for Asphalt Roll Roofing (Organic Felt)

  • ASTM D6380-03 : Specification for Asphalt Roll Roofing (Organic Felt)

  • ASTM D6381 : Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

  • ASTM D6381-03B : Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

  • ASTM D6382 : Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing andWaterproofing Membrane Material

  • ASTM D6382-99 : Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

  • ASTM D6383 : Practice for Time to Failure (Creep Rupture) of Adhesive Joints Fabricated from EPDM RoofMembrane Material

  • ASTM D6383-99E01 : Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

  • ASTM D6384 : Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

  • ASTM D6384-99AE01 : Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

  • ASTM D6385 : Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing

  • ASTM D6385-99 : Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing

  • ASTM D6386 : Practice for Preparation of Zinc (Hot Dip Galvanized) Coated Iron and Steel Product andHardware Surfaces for Painting

  • ASTM D6386-99R05 : Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

  • ASTM D6387 : Test Methods for Composition of Turpentine and Related Terpene Products by Capillary GasChromatography

  • ASTM D6387-99 : Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

  • ASTM D6388 : Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

  • ASTM D6388-99 : Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

  • ASTM D6389 : Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

  • ASTM D6389-99 : Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

  • ASTM D638M-96 : Test Method for Tensile Properties of Plastics (Metric) (Withdrawn 1998)

  • ASTM D6390 : Test Method for Determination of Draindown Characteristics in Uncompacted AsphaltMixtures

  • ASTM D6390-99 : Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

  • ASTM D6391 : Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous MaterialsUsing Two Stages of Infiltration from a Borehole

  • ASTM D6391-99R04 : Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole

  • ASTM D6392 : Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams ProducedUsing Thermo Fusion Methods

  • ASTM D6392-99 : Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

  • ASTM D6393 : Test Method for Bulk Solids Characterization by Carr Indices

  • ASTM D6393-99 : Test Method for Bulk Solids Characterization by Carr Indices

  • ASTM D6394 : Specification for Sulfone Plastics (SP)

  • ASTM D6394-03 : Specification for Sulfone Plastics (SP)

  • ASTM D6395 : Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

  • ASTM D6395-99 : Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

  • ASTM D6396 : Test Method for Testing of Pipe Thread Sealants on Pipe Tees

  • ASTM D6396-99R05 : Test Method for Testing of Pipe Thread Sealants on Pipe Tees

  • ASTM D6398 : Practice to Enhance Identification of Drug Names on Labels

  • ASTM D6398-01E01 : Practice to Enhance Identification of Drug Names on Labels

  • ASTM D639-81(1985) : Methods of Testing Battery Containers Made from Hard Rubber or Equivalent Materials (Withdrawn 1987)

  • ASTM D6399 : Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

  • ASTM D6399-04 : Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

  • ASTM D64- : Specification for Standard Sizes of Coarse Aggregate for Highway Construction (Withdrawn 1937)

  • ASTM D6400 : Specification for Compostable Plastics

  • ASTM D6400-04 : Specification for Compostable Plastics

  • ASTM D6401 : Test Method for Determining Non Tannins and Tannin in Extracts of Vegetable TanningMaterials

  • ASTM D6401-99R04 : Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials

  • ASTM D6402 : Test Method for Determing Soluble Solids and Insolubles in Extracts of Vegetable TanningMaterials

  • ASTM D6402-99R04 : Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials

  • ASTM D6403 : Test Method for Determining Moisture in Raw and Spent Materials

  • ASTM D6403-99R04 : Test Method for Determining Moisture in Raw and Spent Materials

  • ASTM D6404 : Practice for Sampling Vegetable Materials Containing Tannin

  • ASTM D640-44 : Specification and Methods of Test for Concentrated Ammonia Preserved, Creamed, and Centrifuged Natural Rubber Latex (Withdrawn 1951)

  • ASTM D6404-99R04 : Practice for Sampling Vegetable Materials Containing Tannin

  • ASTM D6405 : Practice for Extraction of Tannins from Raw and Spent Materials

  • ASTM D6405-99R04 : Practice for Extraction of Tannins from Raw and Spent Materials

  • ASTM D6406 : Test Method for Analysis of Sugar in Vegetable Tanning Materials

  • ASTM D6406-99R04 : Test Method for Analysis of Sugar in Vegetable Tanning Materials

  • ASTM D6407 : Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials

  • ASTM D6407-99R04 : Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials

  • ASTM D6408 : Test Method for Analysis of Tannery Liquors

  • ASTM D6408-99R04 : Test Method for Analysis of Tannery Liquors

  • ASTM D6409 : Practice for Color Tests with Sheepskin Skiver

  • ASTM D6409-99R04 : Practice for Color Tests with Sheepskin Skiver

  • ASTM D6410 : Test Method for Determining Acidity of Vegetable Tanning Liquors

  • ASTM D6410-99R04 : Test Method for Determining Acidity of Vegetable Tanning Liquors

  • ASTM D6411/D6411M : Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

  • ASTM D6411/D6411M-99R05 : Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

  • ASTM D6412/D6412M : Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials

  • ASTM D6412/D6412M-99 : Specification for Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

  • ASTM D6413 : Test Method for Flame Resistance of Textiles (Vertical Test)

  • ASTM D6413-99 : Test Method for Flame Resistance of Textiles (Vertical Test)

  • ASTM D6414 : Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction orWet Oxidation/Cold Vapor Atomic Absorption

  • ASTM D6414-01 : Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption

  • ASTM D641-49(1965) : Method of Conditioning Paperboard, Fiberboard, and Paperboard Containers for Testing (Withdrawn 1977)

  • ASTM D6415/D6415M : Test Method for Measuring the Curved Beam Strength of a Fiber Reinforced Polymer MatrixComposite

  • ASTM D6415-99E01 : Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

  • ASTM D6416/D6416M : Test Method for Two Dimensional Flexural Properties of Simply Supported SandwichComposite Plates Subjected to a Distributed Load

  • ASTM D6416/D6416M-01 : Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

  • ASTM D6417-03 : Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

  • ASTM D6418 : Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for VolatileOrganic Analysis

  • ASTM D6418-04 : Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis

  • ASTM D6419 : Test Method for Volatile Content of Sheet Fed and Coldset Web Offset Printing Inks

  • ASTM D6419-00R05 : Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

  • ASTM D642 : Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads

  • ASTM D6420 : Test Method for Determination of Gaseous Organic Compounds by Direct Interface GasChromatography Mass Spectrometry

  • ASTM D6420-99R04 : Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry

  • ASTM D6421 : Test Method for Evaluating Automotive Spark Ignition Engine Fuel for Electronic Port FuelInjector Fouling by Bench Procedure

  • ASTM D6421-99AR04 : Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

  • ASTM D6422 : Test Method for Water Tolerance (Phase Separation) of Gasoline Alcohol Blends

  • ASTM D6422-99 : Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends

  • ASTM D6423 : Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol(Ed75 Ed85)

  • ASTM D6423-99R04 : Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)

  • ASTM D6424 : Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

  • ASTM D6424-04A : Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

  • ASTM D6425 : Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP)

  • ASTM D6425-02 : Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

  • ASTM D6426-04 : Test Method for Determining Filterability of Middle Distillate Fuel Oils

  • ASTM D6427 : Practice for Handling, Transportation, and Storage of HFC 236fa, 1,1,1,3,3,3Hexafluoropropane (CF3CH2CF3)

  • ASTM D6427-99R04 : Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CFCHCF)

  • ASTM D6428 : Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by OxidativeCombustion and Electrochemical Detection

  • ASTM D6428-99 : Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection

  • ASTM D6429 : Guide for Selecting Surface Geophysical Methods

  • ASTM D6429-99 : Guide for Selecting Surface Geophysical Methods

  • ASTM D643 : Test Method for Folding Endurance of Paper by the Schopper Tester

  • ASTM D6430 : Guide for Using the Gravity Method for Subsurface Investigation

  • ASTM D6430-99 : Guide for Using the Gravity Method for Subsurface Investigation

  • ASTM D6431 : Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

  • ASTM D6431-99 : Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

  • ASTM D6432 : Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

  • ASTM D6432-99 : Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

  • ASTM D6433 : Practice for Roads and Parking Lots Pavement Condition Index Surveys

  • ASTM D6433-03 : Practice for Roads and Parking Lots Pavement Condition Index Surveys

  • ASTM D6434 : Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes

  • ASTM D6434-04 : Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes

  • ASTM D6435 : Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes

  • ASTM D6435-99 : Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes

  • ASTM D6436 : Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

  • ASTM D6436-02 : Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

  • ASTM D6437 : Test Method for Polyurethane Raw Materials : alkalinity in Low Alkalinity Polyols(Determination of CPR values of Polyols)

  • ASTM D6437-05 : Test Method for Polyurethane Raw Materials : Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)

  • ASTM D6438 : Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints,

  • ASTM D6438-05 : Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography

  • ASTM D6439-99 : Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

  • ASTM D644 : Test Method for Moisture Content of Paper and Paperboard by Oven Drying

  • ASTM D6440 : Terminology Relating to Hydrocarbon Resins

  • ASTM D6440-05 : Terminology Relating to Hydrocarbon Resins

  • ASTM D6441 : Test Methods for Measuring the Hiding Power of Powder Coatings

  • ASTM D6441-05 : Test Methods for Measuring the Hiding Power of Powder Coatings

  • ASTM D6442 : Test Method for Determination of Copper Release Rate From Antifouling Coatings inSubstitute Ocean Water

  • ASTM D6442-05 : Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

  • ASTM D6443 : Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus,

  • ASTM D6443-04 : Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical

  • ASTM D6444-99 : Test Method for Sulfur in Gasoline by Wavelength Dispersive X-ray Fluorescence (Withdrawn 1999)

  • ASTM D6445 : Test Method for Sulfur in Gasoline by Energy Dispersive X ray Fluorescence Spectrometry

  • ASTM D6445-99R04E01 : Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry

  • ASTM D6446 : Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels

  • ASTM D6446-01 : Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels

  • ASTM D6447-03 : Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

  • ASTM D6448 : Specification for Industrial Burner Fuels from Used Lubricating Oils

  • ASTM D6448-99 : Specification for Industrial Burner Fuels from Used Lubricating Oils

  • ASTM D6449 : Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow ConeMethod)

  • ASTM D6449-99 : Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

  • ASTM D645/D645M : Test Method for Thickness of Paper and Paperboard

  • ASTM D6450 : Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

  • ASTM D6450-99 : Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

  • ASTM D6451 : Guide for Application of Asphalt Based Protection Board

  • ASTM D6451-99 : Guide for Application of Asphalt Based Protection Board

  • ASTM D6452 : Guide for Purging Methods for Wells Used for Ground Water Quality Investigations

  • ASTM D6452-99 : Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations

  • ASTM D6453 : Guide for Format of Computerized Exchange of Soil and Rock Test Data

  • ASTM D6453-99 : Guide for Format of Computerized Exchange of Soil and Rock Test Data

  • ASTM D6454 : Test Method for Determining the Short Term Compression Behavior of Turf ReinforcementMats (TRMs)

  • ASTM D6454-99 : Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)

  • ASTM D6455 : Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

  • ASTM D6455-99 : Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

  • ASTM D6456 : Specification for Finished Parts Made from Polyimide Resin

  • ASTM D6456-99R04 : Specification for Finished Parts Made from Polyimide Resin

  • ASTM D6457 : Specification for Extruded and Compression Molded Rod and Heavy Walled Tubing Madefrom Polytetrafluoroethylene (PTFE)

  • ASTM D6457-04 : Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

  • ASTM D6458 : Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular

  • ASTM D6458-99 : Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular

  • ASTM D6459 : Test Method for Determination of Erosion Control Blanket (ECB) Performance in ProtectingHillslopes from Rainfall Induced Erosion

  • ASTM D6459-99 : Test Method for Determination of Erosion Control Blanket (ECB) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

  • ASTM D646 : Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)

  • ASTM D6460 : Test Method for Determination of Erosion Control Blanket (ECB) Performance in ProtectingEarthen Channels from Stormwater Induced Erosion

  • ASTM D6460-00 : Test Method for Determination of Erosion Control (ECB) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

  • ASTM D6461 : Specification for Silt Fence Materials

  • ASTM D6461-99 : Specification for Silt Fence Materials

  • ASTM D6462 : Practice for Silt Fence Installation

  • ASTM D6462-03 : Practice for Silt Fence Installation

  • ASTM D6463/D6463M : Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

  • ASTM D6463-99 : Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

  • ASTM D6464 : Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to WoodFraming

  • ASTM D6464-03A : Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

  • ASTM D6465 : Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

  • ASTM D6465-99R05 : Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

  • ASTM D6466 : Test Method for Diameter of Wool and Other Animal Fibers By Sirolan Laserscan FiberDiameter Analyser

  • ASTM D6466-99 : Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser

  • ASTM D6467 : Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength ofCohesive Soils

  • ASTM D6467-99 : Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

  • ASTM D6468-99R04 : Test Method for High Temperature Stability of Distillate Fuels

  • ASTM D6469 : Guide for Microbial Contamination in Fuels and Fuel Systems

  • ASTM D6469-04 : Guide for Microbial Contamination in Fuels and Fuel Systems

  • ASTM D6470 : Test Method for Salt in Crude Oils (Potentiometric Method)

  • ASTM D6470-99R04 : Test Method for Salt in Crude Oils (Potentiometric Method)

  • ASTM D6471 : Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume %

  • ASTM D6471-03 : Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume \% Minimum) for Automobile and Light-Duty Service

  • ASTM D6472 : Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and LightDuty Service

  • ASTM D6472-03 : Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service

  • ASTM D6473-99 : Test Method For Specific Gravity And Absorption of Rock For Erosion Control

  • ASTM D6474 : Test Method for Determining Molecular Weight Distribution and Molecular Weight Averagesof Polyolefins by High Temperature Gel Permeation Chromatography

  • ASTM D6474-99 : Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

  • ASTM D6475 : Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

  • ASTM D6475-00 : Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

  • ASTM D6476-05 : Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics

  • ASTM D6477-04 : Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

  • ASTM D6478-02 : Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints

  • ASTM D647-88A : Practice for Design of Molds for Test Specimens of Plastic Molding Materials (Withdrawn 1994)

  • ASTM D6479 : Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in InflatableRestraints

  • ASTM D6479-02 : Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints

  • ASTM D6480 : Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for AsbestosStructure Number Concentration by Transmission Electron Microscopy

  • ASTM D6480-05 : Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy

  • ASTM D6481 : Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oilsby Energy Dispersive X ray Fluorescence Spectroscopy

  • ASTM D6481-99R04 : Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

  • ASTM D6482 : Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchantsby Cooling Curve Analysis with Agitation (Tensi Method)

  • ASTM D6482-01 : Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

  • ASTM D6483 : Test Method for Evaluation of Diesel Engine Oils in T 9 Diesel Engine

  • ASTM D6483-04 : Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine

  • ASTM D6484/D6484M : Test Method for Open Hole Compressive Strength of Polymer Matrix Composite Laminates

  • ASTM D6484/D6484M-04 : Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

  • ASTM D6485 : Guide for Risk Characterization of Acute and Irritant Effects of Short Term Exposure toVolatile Organic Chemicals Emitted from Bedding Sets

  • ASTM D6485-99R04 : Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

  • ASTM D6486 : Practice for Short Term Vehicle Service Exposure of Automotive Coatings

  • ASTM D6486-01R05 : Practice for Short Term Vehicle Service Exposure of Automotive Coatings

  • ASTM D6487 : Practice for Preparing Prints of Paste Printing Inks by Rollouts on a Laboratory Flat BedPress

  • ASTM D6487-04 : Practice for Preparing Prints of Paste Printing Inks by Rollouts on a Laboratory Flat-Bed Press

  • ASTM D6488-04E01 : Terminology Relating to Print Problems

  • ASTM D6489 : Test Method for Determining the Water Absorption of Hardened Concrete Treated With aWater Repellent Coating

  • ASTM D6489-99 : Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

  • ASTM D649- : Method of Test for Compressive Stength of Electrical Insulating Materials (Withdrawn 1947)

  • ASTM D6490 : Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used onCementitious Panels

  • ASTM D6490-99 : Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

  • ASTM D6491 : Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry HeatTest

  • ASTM D6491-99R03 : Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

  • ASTM D6492 : Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy CoatedSteel

  • ASTM D6492-99R03 : Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

  • ASTM D6493 : Test Method for Softening Point of Hydrocarbon Resins by Automated Ring and BallApparatus

  • ASTM D6493-05 : Test Methods for Softening Point of Hydrocarbon Resins by Automated Ring-and-Ball Apparatus

  • ASTM D6494 : Test Method for Determination of Asphalt Fume Particulate Matter in WorkplaceAtmospheres as Benzene Soluble Fraction

  • ASTM D6494-99R04E01 : Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

  • ASTM D6495 : Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

  • ASTM D6495-02 : Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

  • ASTM D6496 : Test Method for Determining Average Bonding Peel Strength Between the Top and BottomLayers of Needle Punched Geosynthetic Clay Liners

  • ASTM D6496-04A : Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

  • ASTM D6497 : Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

  • ASTM D6497-02 : Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

  • ASTM D6498 : Guide for Household Hazardous Waste Training Outline for Household Hazardous WasteCollection Operations

  • ASTM D6498-99R02 : Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations

  • ASTM D6499 : Test Method for the Immunological Measurement of Antigenic Protein in Natural Rubber andits Products

  • ASTM D6499-03 : Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

  • ASTM D6500 : Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber DiameterAnalyser

  • ASTM D6500-00 : Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyzer

  • ASTM D6501 : Test Method for Phosphonate in Brines

  • ASTM D6501-04 : Test Method for Phosphonate in Brines

  • ASTM D6502-99R03 : Test Method for On-Line Measurement of Low Level Particulate and Dissolved Metals in Water by X-Ray Fluorescence (XRF)

  • ASTM D6503 : Test Method for Enterococci in Water Using Enterolert

  • ASTM D6503-99 : Test Method for Enterococci in Water Using Enterolert|Pt

  • ASTM D6504 : Practice for On Line Determination of Cation Conductivity in High Purity Water

  • ASTM D6504-00 : Practice for On-Line Determination of Cation Conductivity in High Purity Water

  • ASTM D650-42 : Tentative Method of Test for Flexural Stength of Electrical Insulating Materials (Withdrawn 1947)

  • ASTM D6505 : Test Method for Assay of normal Propyl Bromide Content

  • ASTM D6505-00 : Test Method for Assay of -Propyl Bromide Content

  • ASTM D6506 : Specification for Asphalt Based Protection for Below Grade Waterproofing

  • ASTM D6506-01 : Specification for Asphalt Based Protection Board for Below-Grade Waterproofing

  • ASTM D6507 : Practice for Fiber Reinforcement Orientation Codes for Composite Materials

  • ASTM D6507-00 : Practice for Fiber Reinforcement Orientation Codes for Composite Materials

  • ASTM D6508 : Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices UsingCapillary Ion Electrophoresis and Chromate Electrolyte

  • ASTM D6508-00R05E01 : Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte

  • ASTM D6509 : Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet MaterialsUsing Glass Fiber Reinforcements

  • ASTM D6509-00 : Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcement

  • ASTM D6510 : Guide for Selection of Asphalt Used in Built Up Roofing Systems

  • ASTM D6510-00 : Guide for Selection of Asphalt Used in Built-Up Roofing Systems

  • ASTM D6511 : Test Methods for Solvent Bearing Bituminous Compounds

  • ASTM D6511-00 : Test Methods for Solvent Bearing Bituminous Compounds

  • ASTM D6512-03 : Practice for Interlaboratory Quantitation Estimate

  • ASTM D6513 : Practice for Calculating the Superimposed Load on Wood frame Walls for Standard FireEndurance Tests

  • ASTM D6513-00 : Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Endurance Tests

  • ASTM D6514 : Test Method for High Temperature Universal Oxidation Test for Turbine Oils

  • ASTM D6514-03 : Test Method for High Temperature Universal Oxidation Test for Turbine Oils

  • ASTM D6515 : Test Method for Rubber Shaft Seals Determination of Recovery From Bending

  • ASTM D6515-00R04 : Test Method for Rubber Shaft Seals Determination of Recovery From Bending

  • ASTM D6517 : Guide for Field Preservation of Ground Water Samples

  • ASTM D6517-00 : Guide for Field Preservation of Ground-Water Samples

  • ASTM D6518 : Practice for Bias Testing a Mechanical Coal Sampling System

  • ASTM D6518-03A : Practice for Bias Testing a Mechanical Coal Sampling System

  • ASTM D651-84 : Method of Test for Tensile Strength of Molded Electrical Insulating Materials (Withdrawn 1989)

  • ASTM D6519 : Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

  • ASTM D6519-02 : Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

  • ASTM D6520 : Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for theAnalysis of Volatile and Semi Volatile Organic Compounds

  • ASTM D6520-00 : Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds

  • ASTM D6521 : Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

  • ASTM D6521-04 : Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

  • ASTM D6522 : Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and OxygenConcentrations in Emissions from Natural Gas Fired Reciprocating Engines, Combustion Turbines,

  • ASTM D6522-00 : Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using

  • ASTM D65-23 : Specification for Crushed Stone, Crushed Slag and Gravel for Water-Bound Macadam Base and Surface Coarse of Pavements (Withdrawn 1938)

  • ASTM D6523 : Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

  • ASTM D6523-00 : Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

  • ASTM D6524 : Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)

  • ASTM D6524-00 : Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)

  • ASTM D6525 : Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products

  • ASTM D6525-00 : Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products

  • ASTM D652-52(1955) : Method of Measuring Mica Stampings Use in Electronic Devices and Incandescent Lamps (Withdrawn 1956)

  • ASTM D6526 : Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

  • ASTM D6526-03E01 : Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

  • ASTM D6527 : Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in PorousMedia by Steady State Centrifugation

  • ASTM D6527-00 : Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

  • ASTM D6528 : Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

  • ASTM D6528-00 : Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

  • ASTM D6529 : Test Method for Operating Performance of Continuous Electrodeionization Systems on Feedsfrom 50 1000 uS/cm

  • ASTM D6529-00 : Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50\N1000 |gmS/cm

  • ASTM D653 : Terminology Relating to Soil, Rock, and Contained Fluids

  • ASTM D6530 : Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)

  • ASTM D6530-00 : Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)

  • ASTM D6531 : Test Method for Relative Tinting Strength of Aqueous Ink Systems by InstrumentalMeasurement

  • ASTM D6531-00R05 : Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

  • ASTM D6532 : Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on WaterAbsorption of Hydraulic Cement Mortar Specimens

  • ASTM D6532-00 : Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

  • ASTM D6534 : Test Method for Determining the Peak Force to Actuate a Mechanical Pump Dispenser

  • ASTM D6534-00 : Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser

  • ASTM D6535 : Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser

  • ASTM D6535-00 : Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser

  • ASTM D6536 : Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser

  • ASTM D6536-00 : Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser

  • ASTM D6537 : Practice for Instrumented Package Shock Testing For Determination of PackagePerformance

  • ASTM D6537-00 : Practice For Instrumented Package Shock Testing For Determination of Package Performance

  • ASTM D6538 : Guide for Sampling Wastewater With Automatic Samplers

  • ASTM D6538-00 : Guide for Sampling Wastewater With Automatic Samplers

  • ASTM D6539 : Test Method for Measurement of Pneumatic Permeability of Partially Saturated PorousMaterials by Flowing Air

  • ASTM D6539-00 : Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air

  • ASTM D6540 : Test Method for Accelerated Soiling of Pile Yarn Floor Covering

  • ASTM D6540-05 : Test Method for Accelerated Soiling of Pile Yarn Floor Covering

  • ASTM D6541 : Specification for HFC 236fa, 1,1,1,3,3,3 Hexafluoropropane, (CF3CH 2CF3)

  • ASTM D6541-00 : Specification for HFC-236fa, 1,1,1,3,3,3\NHexafluoropropane, (CFCHCF)

  • ASTM D6542 : Practice for Tonnage Calculation of Coal in a Stockpile

  • ASTM D6542-05 : Practice for Tonnage Calculation of Coal in a Stockpile

  • ASTM D6543 : Guide to the Evaluation of Measurements Made by On Line Coal Analyzers

  • ASTM D6543-00E01 : Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers

  • ASTM D6544 : Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing

  • ASTM D6544-00 : Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing

  • ASTM D654-49(1955) : Specification for Coal-Tar Pitch for Steep Built-Up Roofs (Withdrawn 1957)

  • ASTM D6545-00 : Test Method for Flammability of Textiles Used in Children’s Sleepwear

  • ASTM D6546 : Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals forIndustrial Hydraulic Fluid Applications

  • ASTM D6546-00 : Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

  • ASTM D6547 : Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

  • ASTM D6547-00 : Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

  • ASTM D6548 : Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball BurstProcedure)

  • ASTM D6548-00 : Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure)

  • ASTM D6549 : Test Method for Determination of Cooling Characteristics of Quenchants by Cooling CurveAnalysis with Agitation (Drayton Unit)

  • ASTM D6549-01 : Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

  • ASTM D6550-00 : Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

  • ASTM D6551/D6551M : Practice for Accelerated Weathering of Pressure Sensitive Tapes by Xenon Arc ExposureApparatus

  • ASTM D6551-00 : Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus

  • ASTM D6552 : Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

  • ASTM D6552-00 : Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

  • ASTM D6553 : Test Method for Coolant Compatibility of Way Lubricants

  • ASTM D6553-00 : Test Method for Coolant Compatibility of Way Lubricants

  • ASTM D6554 : Performance Specification for 100 % Cotton Denim Fabrics

  • ASTM D6554-00 : Performance Specification for 100 % Cotton Denim Fabrics

  • ASTM D6555 : Guide for Evaluating System Effects in Repetitive Member Wood Assemblies

  • ASTM D6555-03 : Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies

  • ASTM D6556 : Test Method for Carbon Black Total and External Surface Area by Nitrogen Adsorption

  • ASTM D6556-04 : Test Method for Carbon Black\MTotal and External Surface Area by Nitrogen Adsorption

  • ASTM D655-62(1965) : Specification for Asphalt-Saturated and Coated Asbestos Felts for Use in Constructing Built-Up Roofs (Withdrawn 1970)

  • ASTM D6557-04 : Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

  • ASTM D6558 : Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and CathodeBlocks

  • ASTM D6558-00A : Test Method for Determination of TGA CO Reactivity of Baked Carbon Anodes and Cathode Blocks

  • ASTM D6559 : Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked CarbonAnodes and Cathode Blocks

  • ASTM D6559-00A : Test Method for Determination of TGA Air Reactivity of Baked Carbon Anodes and Cathode Blocks

  • ASTM D656 : Specification for Pure Toluidine Red Toner (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM D6560 : Designation : IP 143/01Test Method for Determination of Asphaltenes (Heptane Insolubles)

  • ASTM D6560-00 : Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

  • ASTM D6561 : Test Method for Determination of Aerosol Monomeric and Oligomeric HexamethyleneDiisocyanate (HDl) in Air with (Methoxy 2 phenyl 1) Piperazine (MOPIP) in the Workplace

  • ASTM D6561-00 : Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2\Nphenyl-1) Piperazine (MOPIP) in the Workplace

  • ASTM D6562 : Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9(N methylaminomethyl) Anthracene Method (MAMA) in the Workplace

  • ASTM D6562-00 : Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

  • ASTM D6563 : Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by GasChromatography

  • ASTM D6563-05 : Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

  • ASTM D6564 : Guide for Field Filtration of Ground Water Samples

  • ASTM D6564-00 : Guide for Field Filtration of Ground-Water Samples

  • ASTM D6565 : Test Method for Determination of Water (Moisture) Content of Soil by the Time DomainReflectometry (TDR) Method

  • ASTM D6565-00 : Test Method for Determination of Water (Moisture) Content in Soil by the Time-Domain Reflectometry (TDR) Method

  • ASTM D6566 : Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats

  • ASTM D6566-00 : Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats

  • ASTM D6567 : Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)

  • ASTM D6567-00 : Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)

  • ASTM D6568 : Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of WaterSamples

  • ASTM D6568-00 : Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples

  • ASTM D656-87(1999) : Specification for Pure Toluidine Red Toner (Withdrawn 2003)

  • ASTM D6569-00 : Test Method for On-Line Measurement of pH

  • ASTM D6570 : Practice for Assigning Allowable Properties for Mechanically Graded Lumber

  • ASTM D6570-04 : Practice for Assigning Allowable Properties for Mechanically Graded Lumber

  • ASTM D6571 : Test Method for Determination of Compression Resistance and Recovery Properties ofHighloft Nonwoven Fabric Using Static Force Loading

  • ASTM D6571-01 : Test Method for Determination of Compression Resistance and Recovery Properties of Highloft Nonwoven Fabric Using Static Force Loading

  • ASTM D6572 : Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

  • ASTM D6572-00 : Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

  • ASTM D6573/D6573M : Specification for General Purpose Wirebound Shipping Boxes

  • ASTM D6573/D6573M-01 : Specification for General Purpose Wirebound Shipping Boxes

  • ASTM D6574 : Test Method for Determining the (In Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

  • ASTM D6574-00 : Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

  • ASTM D6575 : Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats(TRM’s)

  • ASTM D6575-00 : Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM’s)

  • ASTM D6576 : Specification for Flexible Cellular Rubber Chemically Blown

  • ASTM D6576-00 : Specification for Flexible Cellular Rubber Chemically Blown

  • ASTM D657-66(1972) : Specification for Isopropyl Aletate (Withdrawn 1977)

  • ASTM D6577 : Guide for Testing Industrial Protective Coatings

  • ASTM D6577-00A : Guide for Testing Industrial Protective Coatings

  • ASTM D6578 : Practice for Determination of Graffiti Resistance

  • ASTM D6578-00 : Practice for Determination of Graffiti Resistance

  • ASTM D6579 : Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbonand Terpene Resins by Size Exclusion Chromatography

  • ASTM D6579-00 : Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography

  • ASTM D6580 : Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and inCured Films of Zinc Rich Coatings

  • ASTM D6580-00R05 : Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

  • ASTM D6581 : Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by ChemicallySuppressed Ion Chromatography

  • ASTM D6581-00R05 : Test Method for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Chemically Suppressed Ion Chromatography

  • ASTM D6582 : Guide for Ranked Set Sampling : Efficient Estimation of a Mean Concentration inEnvironmental Sampling

  • ASTM D6582-00 : Guide for Ranked Set Sampling : Efficient Estimation of a Mean Concentration in Environmental Sampling

  • ASTM D6583 : Test Method for Porosity of Paint Film by Mineral Oil Absorption

  • ASTM D6583-04 : Test Method for Porosity of Paint Film by Mineral Oil Absorption

  • ASTM D6584 : Test Method for Determination of Free and Total Glycerin in B 100 Biodiesel Methyl EstersBy Gas Chromatography

  • ASTM D6584-00 : Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography

  • ASTM D6585-00 : Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

  • ASTM D6586 : Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems UsingRapid Small Scale Column Tests

  • ASTM D6586-03 : Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests

  • ASTM D6587 : Test Method for Yarn Number Using Automatic Tester

  • ASTM D6587-00 : Test Method for Yarn Number Using Automatic Tester

  • ASTM D6588 : Test Method for Fatigue of Tire Cords (Disc Fatigue Test)

  • ASTM D6588-02 : Test Method for Fatigue of Tire Cords (Disc Fatigue Test)

  • ASTM D6589 : Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance

  • ASTM D6589-00 : Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance

  • ASTM D658-91 : Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)

  • ASTM D6590/D6590M : Specification for Pressure Sensitive Tape for Sealing Fiber Containers and Cans

  • ASTM D6590/D6590M-00 : Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans

  • ASTM D6591-00 : Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates\MHigh Performance Liquid Chromatography Method with Refractive Index Detection

  • ASTM D6592 : Test Method for Portable Chemiluminescent Water Quality Determination

  • ASTM D6592-01 : Test Method for Portable Chemiluminescent Water Quality Determination

  • ASTM D6593 : Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation ina Spark Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under LowTemperature, Light Duty Conditions

  • ASTM D6593-04A : Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

  • ASTM D6594-04A : Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135|SDC

  • ASTM D6595 : Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils orUsed Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

  • ASTM D6595-00 : Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

  • ASTM D6596 : Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

  • ASTM D6596-00 : Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

  • ASTM D6597 : Practice for Assessment of Attaining Clean Up Level for Site Closure

  • ASTM D6597-00 : Practice for Assessment of Attaining Clean Up Level for Site Closure

  • ASTM D6598 : Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

  • ASTM D6598-00 : Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

  • ASTM D659-86 : Method of Evaluating Degree of Chalking of Exterior Paints (Withdrawn 1989)

  • ASTM D6599 : Practice for Construction of Live Fascines on Slopes

  • ASTM D6599-00 : Practice for Construction of Live Fascines on Slopes

  • ASTM D660 : Test Method for Evaluating Degree of Checking of Exterior Paints

  • ASTM D6600 : Practice for Evaluating Test Sensitivity for Rubber Test Methods

  • ASTM D6600-00R04 : Practice for Evaluating Test Sensitivity for Rubber Test Methods

  • ASTM D6601 : Test Method for Rubber Properties Measurement of Cure and After Cure Dynamic PropertiesUsing a Rotorless Shear Rheometer

  • ASTM D6601-02 : Test Method for Rubber Properties\MMeasurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

  • ASTM D6602 : Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or OtherEnvironmental Particulate, or Both

  • ASTM D6602-03B : Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

  • ASTM D6603 : Guide for Labeling of UV Protective Textiles

  • ASTM D6603-00 : Guide for Labeling of UV-Protective Textiles

  • ASTM D6604 : Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential ScanningCalorimetry

  • ASTM D6604-00 : Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

  • ASTM D6605 : Practice for Determining the Color Stability of Hydrocarbon Resins After Heating

  • ASTM D6605-00 : Practice for Determining the Color Stability of Hydrocarbon Resins After Heating

  • ASTM D6606 : Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer

  • ASTM D6606-00R05 : Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer

  • ASTM D6607 : Practice for Inclusion of Precision Statement Variation in Specification Limits

  • ASTM D6607-00 : Practice for Inclusion of Precision Statement Variation in Specification Limits

  • ASTM D6608-00 : Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

  • ASTM D6609 : Guide for Part Stream Sampling of Coal

  • ASTM D6609-01 : Guide for Part-Stream Sampling of Coal

  • ASTM D661 : Test Method for Evaluating Degree of Cracking of Exterior Paints

  • ASTM D6610 : Practice for Manual Sampling Coal from Surfaces of a Stockpile (Withdrawn 2003) Replacedby D6883

  • ASTM D6610-01a : Practice for Manual Sampling Coal from Surfaces of a Stockpile (Withdrawn 2003)

  • ASTM D6611 : Test Method for Wet and Dry Yarn on Yarn Abrasion Resistance

  • ASTM D6611-00 : Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance

  • ASTM D6612 : Test Method for Yarn Number and Yarn Number Variability Using Automated Tester

  • ASTM D6612-00 : Test Method for Yarn Number and Yarn Number Variability Using Automated Tester

  • ASTM D6613 : Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric

  • ASTM D6613-02 : Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric

  • ASTM D6614 : Test Method for Stretch Properties of Textile Fabrics CRE Method

  • ASTM D6614-00 : Test Method for Stretch Properties of Textile Fabrics \N CRE Method

  • ASTM D6615-04A : Specification for Jet B Wide-Cut Aviation Turbine Fuel

  • ASTM D6616 : Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing SimulatorViscometer At 100°C

  • ASTM D6616-01A : Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100|SDC

  • ASTM D6617-00 : Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

  • ASTM D6618 : Test Method for Evaluation of Engine Oils in Diesel Four Stroke Cycle Supercharged 1M PCSingle Cylinder Oil Test Engine

  • ASTM D6618-04 : Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

  • ASTM D6619 : Practice for Incorporating Pigments by High Speed Dispersion

  • ASTM D6619-00 : Practice for Incorporating Pigments by High Speed Dispersion

  • ASTM D662 : Test Method for Evaluating Degree of Erosion of Exterior Paints

  • ASTM D6620 : Practice for Asbestos Detection Limit Based on Counts

  • ASTM D6620-00 : Practice for Asbestos Detection Limit Based on Counts

  • ASTM D6621 : Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

  • ASTM D6621-00 : Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials

  • ASTM D6622 : Guide for Application of Fully Adhered Hot Applied Reinforced Waterproofing Systems

  • ASTM D6622-01 : Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

  • ASTM D66-23 : Specification for Water-Bound Base, Shorel-Run or Crusher Run (Withdrawn 1938)

  • ASTM D6623-01 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography

  • ASTM D6624 : Practice for Determining a Flow Proportioned Average Property Value (FPAPV) for aCollected Batch of Process Stream Material Using Stream Analyzer Data

  • ASTM D6624-01 : Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

  • ASTM D6625 : Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted PanelUsing Fluorescent UV Condensation Light and Water Exposure Apparatus

  • ASTM D6625-01 : Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus

  • ASTM D6626 : Specification for Graded Trinidad Lake Modified Asphalt Binder

  • ASTM D6626-01 : Specification for Graded Trinidad Lake Modified Asphalt Binder

  • ASTM D6627 : Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

  • ASTM D6627-01 : Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

  • ASTM D6628 : Specification for Color of Pavement Marking Materials

  • ASTM D6628-03 : Specification for Color of Pavement Marking Materials

  • ASTM D6629 : Guide for Selection of Methods for Estimating Soil Loss by Erosion

  • ASTM D6629-01 : Guide for Selection of Methods for Estimating Soil Loss by Erosion

  • ASTM D6630 : Guide for Low Slope Insulated Roof Membrane Assembly Performance

  • ASTM D6630-01 : Guide for Low Slope Insulated Roof Membrane Assembly Performance

  • ASTM D6631 : Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose ofDetermining the Precision of a Test Method

  • ASTM D6631-05 : Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

  • ASTM D6632 : Test Method for Total Copper in Antifouling Paints

  • ASTM D6632-01 : Test Method for Total Copper in Antifouling Paints

  • ASTM D6633 : Test Method for Basic Functional Stability of a Mechanical Pump Dispenser

  • ASTM D6633-01 : Test Method for Basic Functional Stability of a Mechanical Pump Dispenser

  • ASTM D6634 : Guide for the Selection of Purging and Sampling Devices for Ground Water Monitoring Wells

  • ASTM D6634-01 : Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells

  • ASTM D663-46 : Tentative Method of Test for Acid and Base Value Numbers of Petroleum Oils by Color-Indictor Titration (Withdrawn 1947)

  • ASTM D6635 : Test Method for Performing the Flat Plate Dilatometer

  • ASTM D6635-01 : Test Method for Performing the Flat Plate Dilatometer

  • ASTM D6636 : Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

  • ASTM D6636-01 : Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

  • ASTM D6637 : Test Method for Determining Tensile Properties of Geogrids by the Single or Multi RibTensile Method

  • ASTM D6637-01 : Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

  • ASTM D6638 : Test Method for Determining Connection Strength Between Geosynthetic Reinforcement andSegmental Concrete Units (Modular Concrete Blocks)

  • ASTM D6638-01 : Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

  • ASTM D6639 : Guide for Using the Frequency Domain Electromagnetic Method for SubsurfaceInvestigations

  • ASTM D6639-01 : Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

  • ASTM D6640 : Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers forEnvironmental Investigations

  • ASTM D6640-01R05 : Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

  • ASTM D6641/D6641M : Test Method for Determining the Compressive Properties of Polymer Matrix CompositeLaminates Using a Combined Loading Compression (CLC) Test Fixture

  • ASTM D6641/D6641M-01E01 : Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture

  • ASTM D6642 : Guide for Comparison of Techniques to Quantify the Soil Water (Moisture) Flux

  • ASTM D6642-01 : Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

  • ASTM D6643 : Test Method for Testing Wood Base Panel Corner Impact Resistance

  • ASTM D6643-01 : Test Method for Testing Wood-Base Panel Corner Impact Resistance

  • ASTM D6644 : Test Method for Tension Strength of Sew Through Flange Buttons

  • ASTM D6644-01R02 : Test Method for Tension Strength of Sew-Through Flange Buttons

  • ASTM D6645 : Test Method for Methyl (Comonomer) Content in Polyethylene by InfraredSpectrophotometry

  • ASTM D6645-01 : Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

  • ASTM D6646 : Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacityof Granular and Pelletized Activated Carbon

  • ASTM D6646-03 : Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

  • ASTM D6647 : Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

  • ASTM D6647-01 : Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

  • ASTM D6648 : Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using theBending Beam Rheometer (BBR)

  • ASTM D6648-01 : Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

  • ASTM D6650 : Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability,

  • ASTM D6650-01 : Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms

  • ASTM D6651 : Test Method for Determining The Rate of Sorption and Sorptive Capacity Of NonwovenFabrics

  • ASTM D6651-01 : Test Method for Determining The Rate of Sorption and Sorptive Capacity Of Nonwoven Fabrics

  • ASTM D6652 : Test Method for Determining Fibrous Debris From Nonwoven Fabrics

  • ASTM D6652-01 : Test Method for Determining Fibrous Debris From Nonwoven Fabrics

  • ASTM D6653 : Test Methods for Determining the Effects of High Altitude on Packaging Systems by VacuumMethod

  • ASTM D6653-01 : Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method

  • ASTM D6654 : Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

  • ASTM D6654-01 : Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

  • ASTM D6655 : Terminology Relating to Mechanical Pump Dispensers

  • ASTM D6655-01 : Terminology Relating to Mechanical Pump Dispensers

  • ASTM D6656 : Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)

  • ASTM D6656-01 : Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)

  • ASTM D6657 : Test Method for pH of Wet Blue

  • ASTM D6657-01 : Test Method for pH of Wet Blue

  • ASTM D6658 : Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying

  • ASTM D6658-01 : Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying

  • ASTM D6659 : Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests

  • ASTM D6659-01 : Practice for Sampling and Preparation of Wet Blue for Physical and Chemical Tests

  • ASTM D6660 : Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants byAutomatic Phase Transition Method

  • ASTM D6660-01 : Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

  • ASTM D6661 : Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

  • ASTM D6661-01 : Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling

  • ASTM D6662-01 : Specification for Polyolefin-Based Plastic Lumber Decking Boards

  • ASTM D6663 : Specification for Woven and Knitted Comforter and Accessory Products for Institutional andHousehold Use

  • ASTM D6663-01 : Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use

  • ASTM D6664 : Specification for Woven, Knitted and Flocked Bedspread Products for Institutional andHousehold Use

  • ASTM D6664-01 : Specification for Woven, Knitted and Flocked Bedspread Products for Institutional and Household Use

  • ASTM D6665 : Practice for Evaluation of Aging Resistance of Pre stressed Prepainted Metal in a BoilingWater Test

  • ASTM D6665-01 : Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

  • ASTM D666-57 : Method for Conversion of Kinematic Viscosity of Saybolt Furol Viscosity (Withdrawn 1961)

  • ASTM D6666 : Guide for Evaluation of Aqueous Polymer Quenchants

  • ASTM D6666-04 : Guide for Evaluation of Aqueous Polymer Quenchants

  • ASTM D6667 : Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons andLiquefied Petroleum Gases by Ultraviolet Fluorescence

  • ASTM D6667-04 : Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

  • ASTM D6668-01 : Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

  • ASTM D6669 : Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures toAlkyd and Latex Interior Paints

  • ASTM D6669-01A : Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints

  • ASTM D6670 : Practice for Full Scale Chamber Determination of Volatile Organic Emissions from IndoorMaterials/Products

  • ASTM D6670-01 : Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

  • ASTM D6671/D6671M : Test Method for Mixed Mode I Mode II Interlaminar Fracture Toughness of UnidirectionalFiber Reinforced Polymer Matrix Composites

  • ASTM D6671/D6671M-04E01 : Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

  • ASTM D6672 : Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines

  • ASTM D6672-01 : Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines

  • ASTM D6673 : Practice for Sewn Products Pattern Data Interchange Data Format

  • ASTM D6673-04 : Practice for Sewn Products Pattern Data Interchange\MData Format

  • ASTM D6674 : Guide for Proficiency Test Program for Fabrics

  • ASTM D6674-01 : Guide for Proficiency Test Program for Fabrics

  • ASTM D667-42(1952) : Methods of Testing Steatite Used as Electrical Insulation (Withdrawn 1962)

  • ASTM D6675 : Practice for Salt Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings onAutomotive Sheet Steel

  • ASTM D6675-01 : Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

  • ASTM D6676 : Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated TemperaturesUsing Interior Heating

  • ASTM D6676-01E01 : Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating

  • ASTM D6677 : Test Method for Evaluating Adhesion by Knife

  • ASTM D6677-01 : Test Method for Evaluating Adhesion by Knife

  • ASTM D668 : Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for ElectricalInsulation

  • ASTM D6681 : Test Method for Evaluation of Engine Oils in a High Speed, Single Cylinder Diesel EngineCaterpillar 1P Test Procedure

  • ASTM D6681-04 : Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine\MCaterpillar 1P Test Procedure

  • ASTM D6682-01 : Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester

  • ASTM D6683 : Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids

  • ASTM D6683-01 : Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids

  • ASTM D6684 : Specification for Materials and Manufacture of Articulating Concrete Block (ACB) RevetmentSystems

  • ASTM D6684-04 : Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

  • ASTM D6685 : Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete

  • ASTM D6685-01 : Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)

  • ASTM D6686 : Test Method for Evaluation of Tannin Stain Resistance of Coatings

  • ASTM D6686-01 : Test Method for Evaluation of Tannin Stain Resistance of Coatings

  • ASTM D6687 : Guide for Testing Printing Ink Vehicles and Components Thereof

  • ASTM D6687-04 : Guide for Testing Printing Ink Vehicles and Components Thereof

  • ASTM D6688-01 : Test Method for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Method

  • ASTM D6689 : Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from MultipleWorkstations in the Same Laboratory Organization

  • ASTM D6689-01 : Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

  • ASTM D669 : Test Method for Dissipation Factor and Permittivity Parallel with Laminations of LaminatedSheet and Plate Materials

  • ASTM D6690 : Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

  • ASTM D6690-01 : Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

  • ASTM D6691 : Test Method for Determining Aerobic Biodegradation of Plastic Materials in the MarineEnvironment by a Defined Microbial Consortium

  • ASTM D6691-01 : Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium

  • ASTM D6692 : Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materialsin Seawater

  • ASTM D6692-01 : Test Method for Determining the Biodegradability of Radiolabeled Polymeric Plastic Materials in Seawater

  • ASTM D6693 : Test Method for Determining Tensile Properties of Nonreinforced Polyethylene andNonreinforced Flexible Polypropylene Geomembranes

  • ASTM D6693-04 : Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

  • ASTM D6694 : Specification for Liquid Applied Silicone Coating Used in Spray Polyurethane Foam Roofing

  • ASTM D6694-01 : Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing

  • ASTM D6695 : Practice for Xenon Arc Exposures of Paint and Related Coatings

  • ASTM D6695-03B : Practice for Xenon-Arc Exposures of Paint and Related Coatings

  • ASTM D6696 : Guide for Understanding Cyanide Species

  • ASTM D6696-01 : Guide for Understanding Cyanide Species

  • ASTM D6697 : Test Method for Determination for Chemical Oxygen Demand (Manganese III OxygenDemand) of Water

  • ASTM D6697-01 : Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water

  • ASTM D6698 : Test Method for On Line Measurement of Turbidity Below 5 NTU in Water

  • ASTM D6698-01 : Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

  • ASTM D6699 : Practice for Sampling Liquids Using Bailers

  • ASTM D6699-01 : Practice for Sampling Liquids Using Bailers

  • ASTM D67 : Withdrawn 1993 : Specification for Pumice Pigment

  • ASTM D670- : Methods of Test for Sludge Formatting in Mineral Transformer Oil (Withdrawn 1953)

  • ASTM D6700 : Practice for Use of Scrap Tire Derived Fuel

  • ASTM D6700-01 : Practice for Use of Scrap Tire-Derived Fuel

  • ASTM D6701 : Test Method for Determining Water Vapor Transmission Rates Through Nonwoven andPlastic Barriers

  • ASTM D6701-01 : Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers

  • ASTM D6702 : Test Method for Determining the Dynamic Wiping Efficiency of Nonwoven Fabrics Not Usedin Cleanrooms

  • ASTM D6702-01 : Test Method for Determining the Dynamic Wiping Efficiency of Nonwoven Fabrics Not Used in Cleanrooms

  • ASTM D6703 : Test Method for Automated Heithaus Titrimetry

  • ASTM D6703-01 : Test Method for Automated Heithaus Titrimetry

  • ASTM D6704 : Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

  • ASTM D6704-01 : Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

  • ASTM D6705 : Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems

  • ASTM D6705-04 : Guide for Repair and Recoat of Spray Polyurethane Foam Roofing Systems

  • ASTM D6706 : Test Method for Measuring Geosynthetic Pullout Resistance in Soil

  • ASTM D6706-01 : Test Method for Measuring Geosynthetic Pullout Resistance in Soil

  • ASTM D6707 : Specification for Circular Knit Geotextile for Use in Subsurface Drainage Applications

  • ASTM D6707-01 : Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications

  • ASTM D6708-04 : Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

  • ASTM D6709 : Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark IgnitionEngine (CLR Oil Test Engine)

  • ASTM D6709-04 : Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

  • ASTM D6710 : Guide for Evaluation of Hydrocarbon Based Quench Oil

  • ASTM D6710-02 : Guide for Evaluation of Hydrocarbon-Based Quench Oil

  • ASTM D6711 : Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

  • ASTM D6711-01 : Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

  • ASTM D6712 : Specification for Ultra High Molecular Weight Polyethylene (UHMW PE) Solid Plastic Shapes

  • ASTM D6712-01 : Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

  • ASTM D6713 : Specification for Extruded and Compression Molded Shapes Made from Poly(VinylideneFluoride) (PVDF)

  • ASTM D6713-01 : Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

  • ASTM D6714 : Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)

  • ASTM D6714-01 : Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)

  • ASTM D6715-01 : Practice for Sampling and Preparation of Salt Preserved (Cured) Hides and Skins for Chemical and Physical Tests

  • ASTM D6716 : Test Method for Total Ash in Wet Blue

  • ASTM D6716-01 : Test Method for Total Ash in Wet Blue

  • ASTM D6717 : Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)

  • ASTM D6717-01 : Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)

  • ASTM D6718 : Practice for Writing Committee D 13 Standards

  • ASTM D6718-02 : Practice for Writing Committee D 13 Standards

  • ASTM D6719 : Guide for Test Methods and Practices for Evaluating Pile Yarn Floor Covering

  • ASTM D6719-05 : Guide for Test Methods and Practices for Evaluating Pile Yarn Floor Covering

  • ASTM D671-93 : Test Method for Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (Withdrawn 2002)

  • ASTM D6720 : Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)

  • ASTM D6720-01 : Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)

  • ASTM D6721 : Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

  • ASTM D6721-01 : Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

  • ASTM D6722 : Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct CombustionAnalysis

  • ASTM D6722-01 : Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis

  • ASTM D6723 : Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension(DT)

  • ASTM D6723-02 : Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

  • ASTM D6724 : Guide for Installation of Direct Push Ground Water Monitoring Wells

  • ASTM D6724-04 : Guide for Installation of Direct Push Ground Water Monitoring Wells

  • ASTM D672-45 : Method of Test for Luminous Reflectance, Transmittance, and Color of Materials (Withdrawn 1950)

  • ASTM D6725 : Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in UnconsolidatedAquifers

  • ASTM D6725-04 : Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

  • ASTM D6726 : Guide for Conducting Borehole Geophysical Logging Electromagnetic Induction

  • ASTM D6726-01 : Guide for Conducting Borehole Geophysical Logging\MElectromagnetic Induction

  • ASTM D6727 : Guide for Conducting Borehole Geophysical Logging Neutron

  • ASTM D6727-01 : Guide for Conducting Borehole Geophysical Logging\MNeutron

  • ASTM D6728 : Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel byRotating Disc Electrode Atomic Emission Spectrometry

  • ASTM D6728-01 : Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

  • ASTM D6729 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by100 Meter Capillary High Resolution Gas Chromatography

  • ASTM D6729-04 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography

  • ASTM D6730 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by100 Metre Capillary (with Precolumn) High Resolution Gas Chromatography

  • ASTM D6730-01 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100\NMetre Capillary (with Precolumn) High-Resolution Gas Chromatography

  • ASTM D6731 : Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or LubricantComponents in a Closed Respirometer

  • ASTM D6731-01 : Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

  • ASTM D6732 : Test Method for Determination of Copper in Jet Fuels by Graphite Furnace AtomicAbsorption Spectrometry

  • ASTM D6732-04 : Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

  • ASTM D6733 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by50 Meter Capillary High Resolution Gas Chromatography

  • ASTM D6733-01 : Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50\NMeter Capillary High Resolution Gas Chromatography

  • ASTM D6734 : Test Method for Low Levels of Coliphages in Water

  • ASTM D6734-01 : Test Method for Low Levels of Coliphages in Water

  • ASTM D6735 : Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral CalciningExhaust Sources/Impinger Method

  • ASTM D6735-01 : Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources\MImpinger Method

  • ASTM D6736 : Test Method for Burnish Resistance of Latex Paints

  • ASTM D6736-01 : Test Method for Burnish Resistance of Latex Paints

  • ASTM D6737 : Test Method for Bulk Density of Tapered Paintbrush Filaments

  • ASTM D6737-01 : Test Method for Bulk Density of Tapered Paintbrush Filaments

  • ASTM D6738 : Test Method for Precipitated Silica/Volatile Content

  • ASTM D6738-01 : Test Method for Precipitated Silica\MVolatile Content

  • ASTM D6739 : Test Method for Silica/pH Value

  • ASTM D6739-01 : Test Method for Silica\MpH Value

  • ASTM D673-93ae1 : Test Method for Mar Resistance of Plastics (Withdrawn 1998)

  • ASTM D6740 : Test Method for Silanes Used in Rubber Formulations (bis (triethoxysilylpropyl)sulfanes) : Residue on Ignition

  • ASTM D6740-01 : Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes) : Residue on Ignition

  • ASTM D6741 : Test Methods for Silanes Used in Rubber Formulations (bis (triethoxysilylpropyl)sulfanes) : Sulfur Content

  • ASTM D6741-01 : Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes) : Sulfur Content

  • ASTM D6742/D6742M : Practice for Filled Hole Tension and Compression Testing of Polymer Matrix CompositeLaminates

  • ASTM D6742/D6742M-02 : Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates

  • ASTM D6743 : Test Method for Thermal Stability of Organic Heat Transfer Fluids

  • ASTM D6743-01E01 : Test Method for Thermal Stability of Organic Heat Transfer Fluids

  • ASTM D6744 : Test Method for Determination of the Thermal Conductivity of Anode Carbons by theGuarded Heat Flow Meter Technique

  • ASTM D6744-01 : Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

  • ASTM D674-46(1969) : Recommended Practices for Long-Time Creep or Stress Relaxation of Plastics Under Tension or Compression at Different Temperatures (Withdrawn 1973)

  • ASTM D6745 : Test Method for Linear Thermal Expansion of Electrode Carbons

  • ASTM D6745-01 : Test Method for Linear Thermal Expansion of Electrode Carbons

  • ASTM D6746-03 : Test Method for Raw Rubber or Unvulcanized Compounds\MDetermination of Tensile Green Strength

  • ASTM D6747 : Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths inGeomembrane

  • ASTM D6747-04 : Guide for Selection of Techniques for Electrical Detection of Potential Leak Paths in Geomembranes

  • ASTM D6748 : Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused bythe Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

  • ASTM D6748-02A : Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

  • ASTM D6749 : Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

  • ASTM D6749-02 : Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

  • ASTM D6750 : Test Methods for Evaluation of Engine Oils in a High Speed, Single Cylinder Diesel Engine 1KProcedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

  • ASTM D6750-04 : Test Methods for Evaluation of Engine Oils in A High-Speed, Single-Cylinder Diesel Engine \M1K Procedure (0.4 \% Fuel Sulfur) and 1N Procedure (0.04 \% Fuel Sulfur)

  • ASTM D6751 : Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels

  • ASTM D6751-03A : Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

  • ASTM D6752 : Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures UsingAutomatic Vacuum Sealing Method

  • ASTM D6752-03E01 : Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

  • ASTM D6753 : Specification for Coal Tar Adhesive

  • ASTM D6753-02 : Specification for Coal Tar Adhesive

  • ASTM D6754 : Specification for Ketone Ethylene Ester Based Sheet Roofing

  • ASTM D6754-02 : Specification for Ketone Ethylene Ester Based Sheet Roofing

  • ASTM D6756 : Test Method for Determination of the Red Dye Concentration and Estimation of the ASTMColor of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

  • ASTM D675-60 : Nomenclature of Descriptive Terms Pertaining to Plastics (Withdrawn 1960)

  • ASTM D6756-02 : Test Method for Determination of the Red Dye Concentration and Estimation of the Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

  • ASTM D6757 : Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep Slope Roofing

  • ASTM D6757-05 : Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

  • ASTM D6758 : Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil Aggregate InPlace by an Electro Mechanical Method

  • ASTM D6758-02 : Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by an Electro-Mechanical Method

  • ASTM D6759 : Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

  • ASTM D6759-02 : Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

  • ASTM D6760 : Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic CrossholeTesting

  • ASTM D6760-02 : Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

  • ASTM D6761 : Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

  • ASTM D6761-04A : Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

  • ASTM D6762 : Test Method for Determining the Hiding Power of Paint by Visual Evaluation of SprayApplied Coatings

  • ASTM D6762-02A : Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings

  • ASTM D6763 : Guide for Testing Exterior Wood Stains

  • ASTM D6763-02 : Guide for Testing Exterior Wood Stains

  • ASTM D6764 : Guide for Collection of Water Temperature, Dissolved Oxygen Concentrations, SpecificElectrical Conductance, and pH Data from Open Channels

  • ASTM D6764-02 : Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels

  • ASTM D6765 : Practice for Live Staking

  • ASTM D6765-02 : Practice for Live Staking

  • ASTM D676-59 : Method of Test for Indentation of Rubber by Means of a Durometer (Withdrawn 1964)

  • ASTM D6766 : Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeatedwith Potentially Incompatible Liquids

  • ASTM D6766-02 : Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids

  • ASTM D6767 : Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

  • ASTM D6767-02 : Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

  • ASTM D6768 : Test Method for Tensile Strength of Geosynthetic Clay Liners

  • ASTM D6768-04 : Test Method for Tensile Strength of Geosynthetic Clay Liners

  • ASTM D6769 : Guide for Application of Fully Adhered, Cold Applied, Prefabricated Reinforced ModifiedBituminous Membrane Waterproofing Systems

  • ASTM D6769-02 : Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

  • ASTM D677- : Specification for Woven Asbestos Cloth (Withdrawn 1957)

  • ASTM D6770 : Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)

  • ASTM D6770-02E01 : Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)

  • ASTM D6771 : Practice for Low Flow Purging and Sampling for Wells and Devices Used for Ground WaterQuality Investigations

  • ASTM D6771-02 : Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations

  • ASTM D6772 : Test Method for Dimensional Stability of Sandwich Core Materials

  • ASTM D6772-02 : Test Method for Dimensional Stability of Sandwich Core Materials

  • ASTM D6773 : Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

  • ASTM D6773-02 : Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

  • ASTM D6774 : Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a DynamicTextured Yarn Tester

  • ASTM D6774-02 : Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester

  • ASTM D6775 : Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and BraidedMaterial

  • ASTM D6775-02E01 : Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material

  • ASTM D6776 : Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials ina Laboratory Scale Simulated Landfill Environment

  • ASTM D6776-02 : Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment

  • ASTM D6777 : Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

  • ASTM D6777-02 : Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

  • ASTM D6778 : Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials

  • ASTM D6778-03 : Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials

  • ASTM D6779-05 : Classification System for Polyamide Molding and Extrusion Materials (PA)

  • ASTM D678- : Tentative Specifications for Finished, All-Cotton, Upholstery Tapestries (Withdrawn 1946)

  • ASTM D6780 : Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry(TDR)

  • ASTM D6780-02 : Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)

  • ASTM D6781 : Guide for Carbon Reactivation

  • ASTM D6781-02 : Guide for Carbon Reactivation

  • ASTM D6782 : Test Methods for Standardization and Calibration of In Line Dry Lumber Moisture Meters

  • ASTM D6782-04 : Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

  • ASTM D6783 : Specification for Polymer Concrete Pipe

  • ASTM D6783-03 : Specification for Polymer Concrete Pipe

  • ASTM D6784 : Test Method for Elemental, Oxidized, Particle Bound and Total Mercury in Flue GasGenerated from Coal Fired Stationary Sources (Ontario Hydro Method)

  • ASTM D6784-02 : Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)

  • ASTM D6785 : Test Method for Determination of Lead in Workplace Air Using Flame or Graphite FurnaceAtomic Absorption Spectrometry

  • ASTM D6785-02 : Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

  • ASTM D6786 : Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical ParticleCounters

  • ASTM D6786-02 : Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters

  • ASTM D6787 : Specification for Repositionable Note Pad

  • ASTM D6787-02 : Specification for Repositionable Note Pad

  • ASTM D6788 : Specification for Repositionable Pressure Sensitive Flags

  • ASTM D6788-02 : Specification for Repositionable Pressure-Sensitive Flags

  • ASTM D6789 : Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon ArcExposure Apparatus

  • ASTM D6789-02E01 : Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus

  • ASTM D679- : Methods of Testing and Tolerances for Certain Fine Staple Cotton Gray Goods (Withdrawn 1965)

  • ASTM D6790 : Test Method for Determining Poisson’s Ratio of Honeycomb Cores

  • ASTM D6790-02 : Test Method for Determining Poisson’s Ratio of Honeycomb Cores

  • ASTM D6791 : Test Method for Determination of Grain Stability of Calcined Petroleum Coke

  • ASTM D6791-02 : Test Method for Determination of Grain Stability of Calcined Petroleum Coke

  • ASTM D6792-04A : Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories

  • ASTM D6793 : Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

  • ASTM D6793-02 : Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

  • ASTM D6794 : Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment withVarious Amounts of Water and a Long (6 h) Heating Time

  • ASTM D6794-02 : Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time

  • ASTM D6795 : Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment withWater and Dry Ice and a Short (30 min) Heating Time

  • ASTM D6795-02 : Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

  • ASTM D6796 : Practice for Production of Coal, Coke and Coal Combustion Samples for InterlaboratoryStudies

  • ASTM D6796-02 : Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

  • ASTM D6797 : Test Method for Bursting Strength of Fabrics Constant Rate of Extension (CRE) Ball BurstTest

  • ASTM D6797-02 : Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test

  • ASTM D6798 : Termninology Relating to Flax and Linen

  • ASTM D6798-02 : Terminology Relating to Flax and Linen

  • ASTM D6799-05 : Terminology Relating to Inflatable Restraints

  • ASTM D680- : Methods of Testing and Tolerances for Certain Fine Staple Cotton Gray Goods (Withdrawn 1965)

  • ASTM D6800 : Practice for Preparation of Water Samples Using Reductive Precipitation PreconcentrationTechnique for ICP MS Analysis of Trace Metals

  • ASTM D6800-02 : Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals

  • ASTM D6801 : Test Method for Measuring Maximum Spontaneous Heating Temperature of Art Materials

  • ASTM D6801-02A : Test Method for Measuring Maximum Spontaneous Heating Temperature of Art Materials

  • ASTM D6802 : Test Method for Determination of the Relative Content Of Dissolved Decay Products in MineralInsulating Oils by Spectrophotometry

  • ASTM D6802-02 : Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry

  • ASTM D6803 : Practice for Testing and Sampling of Volatile Organic Compounds (Including CarbonylCompounds) Emitted from Paint Using Small Environmental Chambers

  • ASTM D6803-02 : Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers

  • ASTM D6804 : Guide for Hand Hole Design in Corrugated Boxes

  • ASTM D6804-02 : Guide for Hand Hole Design in Corrugated Boxes

  • ASTM D6805 : Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio ofBituminous Emulsions

  • ASTM D6805-02 : Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions

  • ASTM D6806 : Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by GasChromatography

  • ASTM D6806-02 : Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography

  • ASTM D6807 : Test Method for Operating Performance of Continuous Electrodeionization Systems onReverse Osmosis Permeates from2 to 100 S/cm

  • ASTM D6807-02 : Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 |gmS/cm

  • ASTM D6808 : Practice for Competency Requirements of Reference Material Producers for Water Analysis

  • ASTM D6808-02 : Practice for Competency Requirements of Reference Material Producers for Water Analysis

  • ASTM D6809 : Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons andRelated Materials

  • ASTM D6809-02 : Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials

  • ASTM D6810 : Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry

  • ASTM D6810-02 : Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry

  • ASTM D6811 : Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under TurbulentFlow Conditions (HiReTS Method)1, 2

  • ASTM D6811-02 : Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)

  • ASTM D6812 : Practice for Ground Based Octane Rating Procedures for Turbocharged/Supercharged SparkIgnition Aircraft Engines

  • ASTM D6812-04A : Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

  • ASTM D6813 : Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

  • ASTM D6813-02A : Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

  • ASTM D6814 : Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

  • ASTM D6814-02E01 : Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

  • ASTM D6815 : Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood BasedProducts

  • ASTM D6815-02A : Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

  • ASTM D6816 : Practice for Determining Low Temperature Performance Grade (PG) of Asphalt Binders

  • ASTM D6816-02 : Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

  • ASTM D6817 : Specification for Rigid Cellular Polystyrene Geofoam

  • ASTM D6817-04 : Specification for Rigid Cellular Polystyrene Geofoam

  • ASTM D6818 : Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats

  • ASTM D6818-02 : Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats

  • ASTM D681-87(1993)e1 : Specification for Jute Rove and Plied Yarn for Electrical and Packing Purposes (Withdrawn 2000)

  • ASTM D6819 : Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry OvenExposure Apparatus

  • ASTM D6819-02E02 : Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus

  • ASTM D6820 : Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

  • ASTM D6820-02 : Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

  • ASTM D6821 : Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant ShearStress Viscometer

  • ASTM D6821-02 : Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

  • ASTM D68-22 : Specification for Wooden Boxes, Nailed and Lock-Corner Construction (Withdrawn 1935)

  • ASTM D6822-02 : Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

  • ASTM D6823 : Specification for Commercial Boiler Fuels With Used Lubricating Oils

  • ASTM D6823-02 : Specification for Commercial Boiler Fuels With Used Lubricating Oils

  • ASTM D6824-04 : Test Method for Determining Filterability of Aviation Turbine Fuel

  • ASTM D682-47(1955) : Method of Test for Color Fastness of Dyed Acetate to Atmospheric Fumes (Withdrawn 1957)

  • ASTM D6825 : Guide for Placement of Riprap Revetments

  • ASTM D6825-02E02 : Guide for Placement of Riprap Revetments

  • ASTM D6826 : Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative DailyCover for Municipal Solid Waste Landfills

  • ASTM D6826-02A : Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills

  • ASTM D6827 : Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame AtomicAbsorption (A.A.)

  • ASTM D6827-02 : Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)

  • ASTM D6828 : Test Method for Stiffness of Fabric by the Blade/Slot Procedure

  • ASTM D6828-02 : Test Method for Stiffness of Fabric by the Blade/Slot Procedure

  • ASTM D6829 : Tables of Body Measurements for Juniors, Sizes 0 to 19

  • ASTM D6829-02 : Tables of Body Measurements for Juniors, Sizes 0 to 19

  • ASTM D6830 : Test Method for Characterizing the Pressure Drop and Filtration Performance of CleanableFilter Media

  • ASTM D6830-02 : Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

  • ASTM D6831 : Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an InStack, Inertial Microbalance

  • ASTM D6831-05 : Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

  • ASTM D6832 : Test Method for the Determination of Hexavalent Chromium in Workplace Air by IonChromatography and Spectrophotometric Measurement Using 1,5 diphenylcarbazide

  • ASTM D6832-02 : Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

  • ASTM D6833 : Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by PollutionChamber Exposure Apparatus

  • ASTM D6833-02E01 : Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus

  • ASTM D6834 : Test Method for Determining Product Leakage from a Package with a Mechanical PumpDispenser

  • ASTM D6834-02 : Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser

  • ASTM D683-45 : Methods of Test for Identification of Finishes on Textiles (Withdrawn 1960)

  • ASTM D6835 : Classification System for Thermoplastic Elastomer Ether Ester Molding and ExtrusionMaterials (TEEE)

  • ASTM D6835-02 : Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

  • ASTM D6836 : Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Usinga Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

  • ASTM D6836-02 : Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

  • ASTM D6837 : Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy ofPassenger Cars and Light Duty Trucks in Sequence VIB Spark Ignition Engine

  • ASTM D6837-04A : Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

  • ASTM D6838 : Test Method for Cummins M11 High Soot Test

  • ASTM D6838-04 : Test Method for Cummins M11 High Soot Test

  • ASTM D6839 : Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark IgnitionEngine Fuels by Gas Chromatography

  • ASTM D6839-02 : Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

  • ASTM D6840 : Test Method for Effect of Drycleaning on Buttons

  • ASTM D6840-02 : Test Method for Effect of Drycleaning on Buttons

  • ASTM D6841 : Practice for Calculating Design Value Treatment Adjustment Factors for Fire RetardantTreated Lumber

  • ASTM D6841-03 : Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber

  • ASTM D6842 : Guide for Designing Cost Effective Sampling and Measurement Plans by Use of EstimatedUncertainty and Its Components in Waste Management Decision Making

  • ASTM D6842-02E01 : Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making

  • ASTM D6843 : Test Method for Silanes Used in Rubber Formulations (bis (triethoxysilylpropyl)sulfanes) :

  • ASTM D6843-02 : Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes) : Characterization by Gas Chromatography (GC)

  • ASTM D6844 : Test Method for Silanes Used in Rubber Formulations (bis (triethoxysilylpropyl)sulfanes) :

  • ASTM D6844-02 : Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes) : Characterization by High Performance Liquid Chromatography (HPLC)

  • ASTM D6845 : Test Method for Silica, Precipitated, Hydrated/CTAB (Cetyltrimethylammonium Bromide) Surface Area

  • ASTM D6845-02 : Test Method for Silica, Precipitated, Hydrated\MCTAB (Cetyltrimethylammonium Bromide) Surface Area

  • ASTM D684-53(1955) : Methods of Test for Resistance of Textile Materials to Microorganisms (Withdrawn 1957)

  • ASTM D6846 : Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

  • ASTM D6846-02 : Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

  • ASTM D6847 : Test Method for Quantitative Extraction and Recovery of Asphalt Binder from AsphaltMixtures

  • ASTM D6847-02 : Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures

  • ASTM D6848 : Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating forRoofing

  • ASTM D6848-02 : Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing

  • ASTM D6849 : Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders forLPG Test Methods

  • ASTM D6849-02 : Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

  • ASTM D685 : Practice for Conditioning Paper and Paper Products for Testing

  • ASTM D6850 : Guide for QC of Screening Methods in Water

  • ASTM D6850-03 : Guide for QC of Screening Methods in Water

  • ASTM D6851 : Test Method for Determination of Contact pH with Activated Carbon

  • ASTM D6851-02 : Test Method for Determination of Contact pH with Activated Carbon

  • ASTM D6852 : Guide for Determination of Biobased Content, Resources Consumption, and EnvironmentalProfile of Materials and Products

  • ASTM D6852-02 : Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products

  • ASTM D6854 : Test Method for Silica/n Dibutyl Phthalate Absorption Number

  • ASTM D6854-03 : Test Method for Silica\Mn-Dibutyl Phthalate Absorption Number

  • ASTM D6855 : Test Method for Determination of Turbidity Below 5 NTU in Static Mode

  • ASTM D6855-03 : Test Method for Determination of Turbidity Below 5 NTU in Static Mode

  • ASTM D6856 : Guide for Testing Fabric Reinforced “Textile” Composite Materials

  • ASTM D6856-03 : Guide for Testing Fabric-Reinforced |P`Textile|P’ Composite Materials

  • ASTM D6857 : Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures UsingAutomatic Vacuum Sealing Method

  • ASTM D6857-03 : Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

  • ASTM D6859 : Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

  • ASTM D6859-05 : Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings

  • ASTM D686 : Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper

  • ASTM D6860 : Proposed Standard Tables of Body Measurements for Boys, Sizes 6 to 24 Husky

  • ASTM D6860-03 : Tables of Body Measurements for Boys, Sizes 6 to 24 Husky

  • ASTM D6860D6860M : Tables ofBody Measurements for Boys, Sizes 6 to 24 Husky1This proposed de?nitionsstandard has no status as an ASTM standard and is published on behalf of the sponsoring committeeforinformation only for a maximum of two years. Comments are solic

  • ASTM D6862 : Test Method for 90 Degree Peel Resistance of Adhesives

  • ASTM D6862-04 : Test Method for 90 Degree Peel Resistance of Adhesives

  • ASTM D6864-03AE01 : Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

  • ASTM D6865 : Classification System and Basis for Specifications forAcrylonitrile/Styrene/Acrylate (ASA)

  • ASTM D6865-04 : Classification System for Acrylonitrile\NStyrene\NAcrylate (ASA) and Acrylonitrile\NEPDM\NStyrene (AES) Plastics and Alloys Molding and Extrusion Materials

  • ASTM D6866 : Test Methods for Determining the Biobased Content of Natural Range Materials UsingRadiocarbon and Isotope Ratio Mass Spectrometry Analysis

  • ASTM D6866-05 : Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis

  • ASTM D6867 : Specification for Perfluoroalkoxy (PFA) Fluoropolymer Tubing

  • ASTM D6867-03 : Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

  • ASTM D6868 : Specification for Biodegradable Plastics Used as Coatings on Paper and Other CompostableSubstrates

  • ASTM D6868-03 : Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates

  • ASTM D6869 : Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using theKarl Fischer Reaction (the Reaction of Iodine with Water)

  • ASTM D6869-03 : Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

  • ASTM D687- : Method for Quantitative Determination of Coating on Mineral-Coated Paper (Withdrawn 1972)

  • ASTM D6871 : Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

  • ASTM D6871-03 : Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

  • ASTM D6873 : Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

  • ASTM D6873-03 : Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

  • ASTM D6874 : Test Methods for Nondestructive Evaluation of Wood Based Flexural Members UsingTransverse Vibration

  • ASTM D6874-03 : Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

  • ASTM D6875-03 : Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

  • ASTM D6877 : Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

  • ASTM D6877-03 : Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

  • ASTM D6878 : Specification for Thermoplastic Polyolefin Based Sheet Roofing

  • ASTM D6878-03 : Specification for Thermoplastic Polyolefin Based Sheet Roofing

  • ASTM D688- : Method of Test for Pentosaws in Paper (Withdrawn 1966)

  • ASTM D6880 : Specification for Wood Boxes

  • ASTM D6881 : Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By BulkDensity

  • ASTM D6881-03 : Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density

  • ASTM D6883 : Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, orStockpiles

  • ASTM D6883-04 : Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

  • ASTM D6884 : Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

  • ASTM D6884-03 : Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

  • ASTM D6886-03 : Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy

  • ASTM D6887 : Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

  • ASTM D6887-03E01 : Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

  • ASTM D6888 : Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis(FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

  • ASTM D6888-04 : Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

  • ASTM D6889 : Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid PhaseMicroextraction (SPME)

  • ASTM D6889-03 : Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)

  • ASTM D689 : Test Method for Internal Tearing Resistance of Paper

  • ASTM D6890 : Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) ofDiesel Fuel Oils by Combustion in a Constant Volume Chamber

  • ASTM D6890-04 : Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

  • ASTM D6891 : Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark IgnitionEngine

  • ASTM D6891-03 : Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

  • ASTM D6892 : Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

  • ASTM D6892-03 : Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

  • ASTM D6894 : Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct InjectedTurbocharged Automotive Diesel Engine

  • ASTM D6894-03 : Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

  • ASTM D6895 : Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

  • ASTM D6895-03 : Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100|SDC

  • ASTM D6896 : Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils atLow Temperature

  • ASTM D6896-03E01 : Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

  • ASTM D6897-03A : Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

  • ASTM D6898 : Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

  • ASTM D6898-03 : Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

  • ASTM D6899 : Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel

  • ASTM D6899-03 : Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel

  • ASTM D6900 : Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

  • ASTM D6900-03 : Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

  • ASTM D6901 : Specification for Artists’ Colored Pencils

  • ASTM D6901-04 : Specification for Artists’ Colored Pencils

  • ASTM D6902 : Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing ofMelamine Formaldehyde Based Coatings

  • ASTM D6902-04E01 : Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

  • ASTM D6904 : Practice for Resistance to Wind Driven Rain for Exterior Coatings Applied on Masonry

  • ASTM D6904-03 : Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

  • ASTM D6905 : Test Method for Impact Flexibility of Organic Coatings

  • ASTM D6905-03 : Test Method for Impact Flexibility of Organic Coatings

  • ASTM D6906 : Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X RayFluorescence

  • ASTM D6906-03 : Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence

  • ASTM D6907 : Practice for Sampling Soils and Contaminated Media with Hand Operated Bucket Augers

  • ASTM D6907-05E01 : Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers

  • ASTM D690-74 : Specification for Compound Chip Soap (with Rosin) (Withdrawn 1979)

  • ASTM D6908 : Practice for Integrity Testing of Water Filtration Membrane Systems

  • ASTM D6908-03 : Practice for Integrity Testing of Water Filtration Membrane Systems

  • ASTM D6909 : Specification for High Temperature and Acid Resistant Fluorocarbon Terpolymer Elastomer

  • ASTM D6909-03 : Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

  • ASTM D6910 : Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

  • ASTM D6910-04 : Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

  • ASTM D6911 : Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

  • ASTM D6911-03 : Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

  • ASTM D6913 : Test Methods for Particle Size Distribution (Gradation) of Soils Using Sieve Analysis

  • ASTM D6913-04 : Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

  • ASTM D6914 : Practice for Sonic Drilling for Site Characterization and the Installation of SubsurfaceMonitoring Devices

  • ASTM D6914-04E01 : Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

  • ASTM D6915 : Practice for Carbon Black/Evaluation of Standard Reference Blacks

  • ASTM D6915-05A : Practice for Carbon Black\MEvaluation of Standard Reference Blacks

  • ASTM D6916 : Test Method for Determining the Shear Strength Between Segmental Concrete Units(Modular Concrete Blocks)

  • ASTM D6916-03 : Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

  • ASTM D6917 : Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

  • ASTM D6917-03 : Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

  • ASTM D691-74 : Specification for Compound Powdered Soap (Granulated, with Rosin) (Withdrawn 1979)

  • ASTM D6918 : Test Method for Testing Vertical Strip Drains in the Crimped Condition

  • ASTM D6918-03 : Test Method for Testing Vertical Strip Drains in the Crimped Condition

  • ASTM D6919 : Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and

  • ASTM D6919-03 : Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography

  • ASTM D692 : Specification for Coarse Aggregate for Bituminous Paving Mixtures

  • ASTM D6920 : An American National Standard Test Method for Total Sulfur in Naphthas, Distillates,

  • ASTM D6920-03 : Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

  • ASTM D6922 : Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

  • ASTM D6922-03 : Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

  • ASTM D6923 : Test Method for Evaluation of Engine Oils in a High Speed, Single Cylinder DieselEngine/Caterpillar 1R Test Procedure

  • ASTM D6923-03 : Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine\MCaterpillar 1R Test Procedure

  • ASTM D6924 : Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

  • ASTM D6924-03 : Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

  • ASTM D6925 : Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt(HMA) Specimens by Means of the Superpave Gyratory Compactor

  • ASTM D6925-03 : Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

  • ASTM D6926 : Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

  • ASTM D6926-04 : Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

  • ASTM D6927 : Test Method for Marshall Stability and Flow of Bituminous Mixtures

  • ASTM D6927-04 : Test Method for Marshall Stability and Flow of Bituminous Mixtures

  • ASTM D6928 : Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the MicroDeval Apparatus

  • ASTM D6928-03 : Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

  • ASTM D6929-04 : Practice for Freezing of Emulsified Asphalts

  • ASTM D693 : Specification for Crushed Aggregate for Macadam Pavements

  • ASTM D6930-04 : Test Method for Settlement and Storage Stability of Emulsified Asphalts

  • ASTM D6932 : Guide for Materials and Construction of Open Graded Friction Course Plant Mixtures

  • ASTM D6932-04 : Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

  • ASTM D6933-04 : Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

  • ASTM D6934-04 : Test Method for Residue by Evaporation of Emulsified Asphalt

  • ASTM D6935-04 : Test Method for Determining Cement Mixing of Emulsified Asphalt

  • ASTM D6936-04 : Test Method for Determining Demulsibility of Emulsified Asphalt

  • ASTM D6937-04 : Test Method for Determining Density of Emulsified Asphalt

  • ASTM D6939 : Practice for Brushmattressing

  • ASTM D6939-03 : Practice for Brushmattressing

  • ASTM D6940 : Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

  • ASTM D6940-04 : Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

  • ASTM D6941 : Practice for Measuring Fluidization Segregation Tendencies of Powders

  • ASTM D6941-04 : Practice for Measuring Fluidization Segregation Tendencies of Powders

  • ASTM D6942 : Test Method for Stability of Cellulose Fibers in Alkaline Environments

  • ASTM D6942-03 : Test Method for Stability of Cellulose Fibers in Alkaline Environments

  • ASTM D6943 : Practice for Immersion Testing of Industrial Protective Coatings

  • ASTM D6943-03 : Practice for Immersion Testing of Industrial Protective Coatings

  • ASTM D6944-03 : Test Method for Resistance of Cured Coatings to Thermal Cycling

  • ASTM D6945 : Specification for Emulsified Refined Coal Tar (Ready to Use, Commercial Grade)

  • ASTM D6945-03 : Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

  • ASTM D6946 : Specification for Emulsified Refined Coal Tar (Driveway Sealer, Ready to Use, PrimarilyResidential Grade)

  • ASTM D6946-03 : Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

  • ASTM D694-62 : Specification for Crushed Stone, Crushed Slag, and Crushed Gravel for Water-Bound Macadam Base Courses (Withdrawn 1976)

  • ASTM D6948 : Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)

  • ASTM D6948-03 : Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)

  • ASTM D695 : Test Method for Compressive Properties of Rigid Plastics

  • ASTM D6950 : Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified BituminousWaterproofing Membranes Systems for New Building Decks

  • ASTM D6950-04 : Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks

  • ASTM D6951 : Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

  • ASTM D6951-03 : Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

  • ASTM D6953 : Test Method for Determination of Antioxidants and Erucamide Slip Additives in PolyethyleneUsing Liquid Chromatography (LC)

  • ASTM D6953-03 : Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

  • ASTM D6954 : Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combinationof Oxidation and Biodegradation

  • ASTM D6954-04 : Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

  • ASTM D6956 : Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement SystemProvides Analytical Results Consistent with Their Intended Use

  • ASTM D6956-03 : Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use

  • ASTM D6957 : Practice for Measuring Curl in Paint Brush Filling Material

  • ASTM D6957-03 : Practice for Measuring Curl in Paint Brush Filling Material

  • ASTM D6958 : Test Methods for Evaluating Side Bonding Potential of Wood Coatings

  • ASTM D6958-03 : Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

  • ASTM D6959 : Practice for Data Exchange Format for Sewn Product Plotting Devices

  • ASTM D6959-03 : Practice for Data Exchange Format for Sewn Product Plotting Devices

  • ASTM D695M-91 : Test Method for Compressive Properties of Rigid Plastics (Metric) (Withdrawn 1996)

  • ASTM D696 : Test Method for Coefficient of Linear Thermal Expansion of Plastics Between 30°C and 30°CWith a Vitreous Silica Dilatometer

  • ASTM D6960 : Table of Body Measurements Relating to Women’s Plus Size Figure Type, Sizes 14W 32W

  • ASTM D6960-04 : Table of Body Measurements Relating to Women’s Plus Size Figure Type, Sizes 14W\N32W

  • ASTM D6961-03 : Test Method for Color Measurement of Flax Fiber

  • ASTM D6962 : Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings

  • ASTM D6962-05 : Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings

  • ASTM D6963 : Termninology Relating to Sewn Products Automation

  • ASTM D6963-04 : Terminology Relating to Sewn Products Automation

  • ASTM D6966 : Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods forSubsequent Determination of Metals

  • ASTM D6966-03 : Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

  • ASTM D6968 : Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbonsin Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

  • ASTM D6968-03 : Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

  • ASTM D6969 : Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

  • ASTM D6969-03 : Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

  • ASTM D697- : Method of Test for Water Vapor Permeability of Plastic Sheets (Withdrawn 1953)

  • ASTM D6970 : Practice for Collection of Calcined Petroleum Coke Samples for Analysis

  • ASTM D6970-03 : Practice for Collection of Calcined Petroleum Coke Samples for Analysis

  • ASTM D6971 : An American National Standard Test Method for Measurement of Hindered Phenolic and

  • ASTM D6971-04 : Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

  • ASTM D6973-04 : Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

  • ASTM D6974-04 : Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels\MFiltration and Culture Procedures

  • ASTM D6975 : Test Method for Cummins M11 EGR Test

  • ASTM D6975-04 : Test Method for Cummins M11 EGR Test

  • ASTM D6976 : Specification for Rubber Contraceptives/Vaginal Diaphragms

  • ASTM D6976-03 : Specification for Rubber Contraceptives\MVaginal Diaphragms

  • ASTM D6977 : Specification for Polychloroprene Examination Gloves for Medical Application

  • ASTM D6977-04 : Specification for Polychloroprene Examination Gloves for Medical Application

  • ASTM D6978 : Practice for Assessment of Resistance of Medical Gloves to Permeation by ChemotherapyDrugs

  • ASTM D6978-05 : Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

  • ASTM D6979 : Test Method for Polyurethane Raw Materials : Determination of Basicity in Polyols, Expressedas Percent Nitrogen

  • ASTM D6979-03 : Test Method for Polyurethane Raw Materials : Determination of Basicity in Polyols, Expressed as Percent Nitrogen

  • ASTM D698 : Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort(12,400 ft lbf/ft3 (600 kN m/m3))

  • ASTM D6980-04 : Test Method for Determination of Moisture in Plastics by Loss in Weight

  • ASTM D6982 : Practice for Detecting Hot Spots and Buried Objects Using Point Net (Grid) Search Patterns

  • ASTM D6982-03 : Practice for Detecting Hot Spots and Buried Objects Using Point-Net (Grid) Search Patterns

  • ASTM D6984 : Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark IgnitionEngine

  • ASTM D6984-04 : Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

  • ASTM D6985 : Specification for Middle Distillate Fuel Oil Military Marine Applications

  • ASTM D6985-04A : Specification for Middle Distillate Fuel Oil\MMilitary Marine Applications

  • ASTM D6986 : Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (VisualInspection Procedures)

  • ASTM D6986-03 : Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

  • ASTM D6987/D6987M : Test Method for Evaluation of Diesel Engine Oils in T 10 Exhaust Gas Recirculation DieselEngine

  • ASTM D6987-04 : Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

  • ASTM D6988 : Guide for Determination of Thickness of Plastic Film Test Specimens

  • ASTM D6988-03 : Guide for Determination of Thickness of Plastic Film Test Specimens

  • ASTM D6989 : Practices for Preparation of Solvent and Water Based Ink Resin Solutions

  • ASTM D6989-03 : Practices for Preparation of Solvent and Water Based Ink Resin Solutions

  • ASTM D6990 : Practice for Evaluating Biofouling Resistance and Physical Performance of Marine CoatingSystems

  • ASTM D6990-05 : Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

  • ASTM D6991 : Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever(Beam) Method

  • ASTM D6991-05 : Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

  • ASTM D6992 : Test Method for Accelerated Tensile Creep and Creep Rupture of Geosynthetic MaterialsBased on Time Temperature Superposition Using the Stepped Isothermal Method

  • ASTM D6992-03 : Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

  • ASTM D6994 : Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water,

  • ASTM D6994-04 : Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection

  • ASTM D6995 : Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix(Gmm)

  • ASTM D699-58(1970) : Specification for Asphalt Sliding Organic Felt Surfaced with Mineral Granules (Withdrawn 1976)

  • ASTM D6997-04 : Test Method for Distillation of Emulsified Asphalt

  • ASTM D6998-04 : Practice for Evaluating Aggregate Coating using Emulsified Asphalts

  • ASTM D6999-04 : Practice for Miscibility of Emulsified Asphalts

  • ASTM D7000 : Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

  • ASTM D7000-04 : Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

  • ASTM D7001 : Specification for Geocomposites for Pavement Edge Drains and Other High Flow Applications

  • ASTM D7001-04 : Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications

  • ASTM D7002 : Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System

  • ASTM D7002-03 : Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System

  • ASTM D7003 : Test Method for Strip Tensile Properties of Reinforced Geomembranes

  • ASTM D7003-03 : Test Method for Strip Tensile Properties of Reinforced Geomembranes

  • ASTM D7004 : Test Method for Grab Tensile Properties of Reinforced Geomembranes

  • ASTM D7004-03 : Test Method for Grab Tensile Properties of Reinforced Geomembranes

  • ASTM D7005 : Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

  • ASTM D7005-03 : Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

  • ASTM D7006 : Practice for Ultrasonic Testing of Geomembranes

  • ASTM D7006-03 : Practice for Ultrasonic Testing of Geomembranes

  • ASTM D7007 : Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water orEarth Materials

  • ASTM D7007-03 : Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials

  • ASTM D7008 : Specification for Geosynthetic Alternate Daily Covers

  • ASTM D7008-03 : Specification for Geosynthetic Alternate Daily Covers

  • ASTM D700-81(1988) : Specification for Phenolic Molding Compounds (Withdrawn 1990)

  • ASTM D7011-04 : Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

  • ASTM D7012 : Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimensunder Varying States of Stress and Temperatures

  • ASTM D7012-04 : Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

  • ASTM D7013 : Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup

  • ASTM D7013-04 : Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup

  • ASTM D7014 : Practice for Assembly and Placement of Double Twisted Wire Mesh Gabions and RevetMattresses

  • ASTM D7014-04 : Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses

  • ASTM D701-46(1970) : Specification for Cellulose Nitrate (Pyroxylin) Plastic Sheets, Rods, and Tubes (Withdrawn 1980)

  • ASTM D7015 : Practices for Obtaining Undisturbed Block (Cubical and Cylindrical) Samples of Soils

  • ASTM D7015-04 : Practices for Obtaining Undisturbed Block (Cubical and Cylindrical) Samples of Soils

  • ASTM D7016 : Test Method for Evaluate Edge Binding Components Used in Mattresses After Exposure toan Open Flame

  • ASTM D7016-04 : Test Method for Evaluate Edge Binding Components Used in Mattresses After Exposure to an Open Flame

  • ASTM D7017 : Performance Specification for Rainwear and All Purpose, Water Repellent Coat Fabrics

  • ASTM D7017-05 : Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics

  • ASTM D7018 : Termninology Relating to Glass Fiber and Its Products

  • ASTM D7018-04 : Terminology Relating to Glass Fiber and Its Products

  • ASTM D7019 : Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics

  • ASTM D7019-05 : Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics

  • ASTM D7020 : Performance Specification for Woven Blouse, Dress, Dress Shirt Sport Shirt Fabrics

  • ASTM D7020-05 : Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics

  • ASTM D7021 : Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and PajamaFabrics

  • ASTM D7021-05 : Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics

  • ASTM D7022 : Terminology Relating to Apparel

  • ASTM D7022-04 : Terminology Relating to Apparel

  • ASTM D7023 : Terminology Relating to Home Furnishings

  • ASTM D7023-04 : Terminology Relating to Home Furnishings

  • ASTM D7024 : Test Method for Steady State and Dynamic Thermal Performance of Textile Materials

  • ASTM D7024-04 : Test Method for Steady State and Dynamic Thermal Performance of Textile Materials

  • ASTM D7025 : Test Method for Assessing Clean Flax Fiber Fineness

  • ASTM D7025-04AE01 : Test Method for Assessing Clean Flax Fiber Fineness

  • ASTM D7026 : Guide for Sampling and Reporting of Results for Determination of Biobased Content ofMaterials via Carbon Isotope Analysis

  • ASTM D7026-04 : Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

  • ASTM D7027 : Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Usingan Instrumented Scratch Machine

  • ASTM D702-81 : Specification for Cast Methacrylate Plastic Sheets, Rods, Tubes, and Shapes (Withdrawn 1988)

  • ASTM D7029 : Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at180.0F [82.2°C]

  • ASTM D7029-04 : Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0|SDF \[82.2|SDC\]

  • ASTM D7030 : Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers UnderConstant Load Using a Compression Test Machine

  • ASTM D7030-04 : Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

  • ASTM D7031 : Guide for Evaluating Mechanical and Physical Properties of Wood Plastic Composite Products

  • ASTM D7031-04 : Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

  • ASTM D7032 : Specification for Establishing Performance Ratings for Wood Plastic Composite Deck Boardsand Guardrail Systems (Guards or Handrails)

  • ASTM D7032-05 : Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

  • ASTM D7033 : Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood BasedStructural Use Panels

  • ASTM D7034 : Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft CabinsBased on Health and Comfort Considerations

  • ASTM D7034-05 : Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations

  • ASTM D7035 : Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter byInductively Coupled Plasma Atomic Emission Spectrometry (ICP AES)

  • ASTM D7035-04 : Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

  • ASTM D7036 : Practice for Competence of Air Emission Testing Bodies

  • ASTM D7036-04 : Practice for Competence of Air Emission Testing Bodies

  • ASTM D7038 : Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

  • ASTM D7038-04 : Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

  • ASTM D703-81 : Specification for Polystyrene Molding and Extrusion Materials (Withdrawn 1987)

  • ASTM D7039-04 : Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

  • ASTM D704 : Specification for Melamine Formaldehyde Molding Compounds

  • ASTM D7040 : Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and SimilarGrade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

  • ASTM D7040-04 : Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

  • ASTM D7041 : Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oilsby Online Gas Chromatography with Flame Photometric Detection

  • ASTM D7041-04 : Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

  • ASTM D7042 : Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and theCalculation of Kinematic Viscosity)

  • ASTM D7042-04 : Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

  • ASTM D7043-04 : Test Method for Indicating Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

  • ASTM D7044 : Specification for Biodegradable Fire Resistant Hydraulic Fluids

  • ASTM D7044-04A : Specification for Biodegradable Fire Resistant Hydraulic Fluids

  • ASTM D7045 : Guide for Optimization of Ground Water Monitoring Constituents for Detection MonitoringPrograms for RCRA Waste Disposal Facilities

  • ASTM D7045-04 : Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

  • ASTM D7046 : Guide for Use of the Metal Detection Method for Subsurface Investigation

  • ASTM D7046-04 : Guide for Use of the Metal Detection Method for Subsurface Investigation

  • ASTM D7047 : Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier

  • ASTM D7047-04 : Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifiers

  • ASTM D7048 : Guide for Applying Statistical Methods for Assessment and Corrective Action EnvironmentalMonitoring Programs

  • ASTM D7048-04 : Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

  • ASTM D7049 : Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

  • ASTM D7049-04 : Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

  • ASTM D705 : Specification for Urea Formaldehyde Molding Compounds

  • ASTM D7050 : Practice for Rubber from Natural Sources Sampling and Sorting Bales Based on PredictedProcessing Properties

  • ASTM D7050-04 : Practice for Rubber from Natural Sources\MSampling and Sorting Bales Based on Predicted Processing Properties

  • ASTM D7051 : Test Method for Cyclic Thermal Shock of SBS Modified Bituminous Roofing Sheets withFactory Applied Metal Surface

  • ASTM D7054 : Specification for Cautionary Labeling of Extension Poles For Use With Paint ApplicatorsDistributed In North America

  • ASTM D7054-04 : Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America

  • ASTM D7055 : Practice for Preparation (by Abrasive Blast Cleaning) of Hot Rolled Carbon Steel Panels forTesting of Coatings

  • ASTM D7055-04 : Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

  • ASTM D7056 : Test Method for Determining the Tensile Shear Strength of Pre Fabricated BituminousGeomembrane Seams

  • ASTM D7056-04 : Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

  • ASTM D7057 : Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (ExternalStandard)

  • ASTM D7057-04 : Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

  • ASTM D7058 : Test Method for Determination of the Red Dye Concentration and Estimation of SayboltColor of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

  • ASTM D7058-04 : Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

  • ASTM D7059 : Test Method for Determination of Methanol in Crude Oils by Multidimensional GasChromatography

  • ASTM D7059-04E01 : Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

  • ASTM D706 : Specification for Cellulose Acetate Molding and Extrusion Compounds

  • ASTM D7060 : Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power inResidual and Heavy Fuel Oils (Optical Detection Method)

  • ASTM D7060-04 : Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

  • ASTM D7061 : Test Method for Measuring n Heptane Induced Phase Separation of Asphaltene ContainingHeavy Fuel Oils as Separability Number by an Optical Scanning Device

  • ASTM D7061-04 : Test Method for Measuring -Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

  • ASTM D7063 : Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous PavingMixture Samples

  • ASTM D7064 : Practice for Open Graded Friction Course (OGFC) Mix Design

  • ASTM D7064-04 : Practice for Open-Graded Friction Course (OGFC) Mix Design

  • ASTM D7065 : Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol,

  • ASTM D7066 : Test Method for dimer/trimer of chlorotrifluoroethylene (S 316) Recoverable Oil and Greaseand Nonpolar Material by Infrared Determination

  • ASTM D7066-04 : Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

  • ASTM D7067 : Specification for Reinforced White PIB Sheet Used in Roofing Membrane

  • ASTM D7069 : Guide for Field Quality Assurance in a Ground water Sampling Event

  • ASTM D7069-04 : Guide for Field Quality Assurance in a Ground-water Sampling Event

  • ASTM D7070 : Test Method for Creep of Rock Core Under Constant Stress and Temperature

  • ASTM D7070-04 : Test Method for Creep of Rock Core Under Constant Stress and Temperature

  • ASTM D7072 : Practice for Evaluating Accelerated Efflorescence of Latex Coatings

  • ASTM D7072-04 : Practice for Evaluating Accelerated Efflorescence of Latex Coatings

  • ASTM D7073 : Guide for Application and Evaluation of Brush and Roller Applied Paint Films

  • ASTM D7073-05 : Guide for Application and Evaluation of Brush and Roller Applied Paint Films

  • ASTM D7075 : Practice for Evaluating and Reporting Environmental Performance of Biobased Products

  • ASTM D7075-04 : Practice for Evaluating and Reporting Environmental Performance of Biobased Products

  • ASTM D7076 : Test Method for Measurement of Shives in Retted Flax

  • ASTM D7076-05 : Test Method for Measurement of Shives in Retted Flax

  • ASTM D7077 : Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions

  • ASTM D7077-04 : Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions

  • ASTM D7078/D7078M : Test Method for Shear Properties of Composite Materials by V Notched Rail Shear Method

  • ASTM D7078/D7078M-05 : Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

  • ASTM D7081 : Specification for Non Floating Biodegradable Plastics in the Marine Environment

  • ASTM D7082 : Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

  • ASTM D7082-04 : Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

  • ASTM D7083 : Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by GasChromatography

  • ASTM D7083-04 : Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

  • ASTM D7084 : Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

  • ASTM D7084-04 : Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

  • ASTM D708-44 : Specification for Vinyl Chloride Polymer and Copolymer Rigisdheets (Withdrawn 1962)

  • ASTM D7085 : Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X rayFluorescence Spectrometry (XRF)

  • ASTM D7085-04 : Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

  • ASTM D7087 : Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated TestPanels Subjected to Corrosive Environments

  • ASTM D7087-05A : Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments

  • ASTM D7088 : Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below GradeApplications Applied to Masonry

  • ASTM D7088-04 : Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

  • ASTM D709 : Specification for Laminated Thermosetting Materials

  • ASTM D7090 : Test Method for Purity of Isophorone by Capillary Gas Chromatography

  • ASTM D7090-04 : Test Method for Purity of Isophorone by Capillary Gas Chromatography

  • ASTM D7091 : Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic CoatingsApplied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non Ferrous Metals

  • ASTM D7091-05 : Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

  • ASTM D7093 : Test Method for Formability of Thin Film Organic Coatings on Steel Over a BiaxiallyStretched Dome

  • ASTM D7093-04 : Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome

  • ASTM D7094-04 : Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

  • ASTM D7095 : Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum ProductsUsing a Disposable Copper Foil Strip

  • ASTM D7095-04 : Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

  • ASTM D7096 : Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide BoreCapillary Gas Chromatography

  • ASTM D7097 : Test Method for Determination of Moderately High Temperature Piston Deposits by ThermoOxidation Engine Oil Simulation Test TEOST MHT

  • ASTM D7098 : Test Method for Oxidation Stability of Lubricants by Thin Film Oxygen Uptake (TFOUT) Catalyst B

  • ASTM D7099 : Terminology Relating to Frozen Soil and Rock

  • ASTM D7099-04 : Terminology Relating to Frozen Soil and Rock

  • ASTM D71 : Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

  • ASTM D710 : Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation

  • ASTM D7100 : Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

  • ASTM D7100-04 : Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity

  • ASTM D7101 : Index Test Method forDetermination of Unvegetated Rolled Erosion ControlProduct (RECP)

  • ASTM D7102 : Guide for Determination of Endotoxin on Sterile Medical Gloves

  • ASTM D7102-04 : Guide for Determination of Endotoxin on Sterile Medical Gloves

  • ASTM D7103 : Guide for Assessment of Medical Gloves

  • ASTM D7106 : Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

  • ASTM D7107 : Test Method for Creep Measurement of Self Lubricating Bushings

  • ASTM D7107-04 : Test Method for Creep Measurement of Self-Lubricating Bushings

  • ASTM D7108-05 : Guide for Establishing Qualifications for a Nuclear Coatings Specialist

  • ASTM D7109 : Test Method for Shear Stability of Polymer Containing Fluids Using a European DieselInjector Apparatus at 30 and 90 Cycles

  • ASTM D711 : Test Method for No Pick Up Time of Traffic Paint

  • ASTM D7110 : Test Method for Determining the Viscosity Temperature Relationship of Used and SootContaining Engine Oils at Low Temperatures

  • ASTM D7111 : Test Method for Determination of Trace Elements in Middle Distillate Fuels by InductivelyCoupled Plasma Atomic Emission Spectrometry (ICP AES)

  • ASTM D7112 : Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils byHeavy Fuel Oil Stability Analyzer (Optical Detection)

  • ASTM D7113 : Test Method for Density of Bituminous Paving Mixtures in Place by the ElectromagneticSurface Contact Methods

  • ASTM D7113-05 : Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

  • ASTM D7115 : Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle ofGyration Using Simulated Loading

  • ASTM D7115-05 : Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

  • ASTM D7116 : Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland CementConcrete Pavements

  • ASTM D7121 : Test Method for Rubber Property Resilience Using Schob Type Rebound Pendulum

  • ASTM D7122 : Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)

  • ASTM D7122-05 : Specification for HCFC Blend B (CFCClH, Ar, and CF)

  • ASTM D7123 : Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, andCF4)

  • ASTM D7123-04 : Practice for Handling, Transportation, and Storage of HCFC Blend B (CFCClH, Ar, and CF)

  • ASTM D7124 : Specification for Benzene for use with Zeolite Based Catalysts

  • ASTM D7124-05 : Specification for Benzene for use with Zeolite Based Catalysts

  • ASTM D712-47(1955) : Method of Test for Light Sensitivity of Traffic Paint (Withdrawn 1957)

  • ASTM D7125 : Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

  • ASTM D7125-04 : Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

  • ASTM D7128 : Guide for Using the Seismic Reflection Method for Shallow Subsurface Investigation

  • ASTM D713 : Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

  • ASTM D7132 : Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

  • ASTM D7133 : Test Method for Polyurethane Raw Materials : Instrumental Measurement of TristimulusCIELAB Color and Yellowness Index of Liquids

  • ASTM D7134 : Test Method for Molecular Mass Averages and Molecular Mass Distribution of AtacticPolystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI) Time of Flight (TOF) MassSpectrometry (MS)

  • ASTM D7136/D7136M : Test Method for Measuring the Damage Resistance of a Fiber Reinforced Polymer MatrixComposite to a Drop Weight Impact Event

  • ASTM D7136/D7136M-05E01 : Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

  • ASTM D7137/D7137M : Test Method for Compressive Residual Strength Properties of Damaged Polymer MatrixComposite Plates

  • ASTM D7137/D7137M-05E01 : Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

  • ASTM D7139-05 : Terminology for Cotton Fibers

  • ASTM D714 : Test Method for Evaluating Degree of Blistering of Paints

  • ASTM D7140 : Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials

  • ASTM D7142 : Test Method for Holding Strength of Prong Ring Attached Snap Fasteners

  • ASTM D7143 : Practice for Emission Cells for the Determination of Volatile Organic Emissions from IndoorMaterials/Products

  • ASTM D7143-05 : Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

  • ASTM D7144 : Practice for Collection of Surface Dust by Micro vacuum Sampling for Subsequent MetalsDetermination

  • ASTM D7144-05 : Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

  • ASTM D7145 : Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means

  • ASTM D7145-05 : Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means

  • ASTM D7147 : Specification for Testing and Establishing Allowable Loads of Joist Hangers

  • ASTM D7147-05 : Specification for Testing and Establishing Allowable Loads of Joist Hangers

  • ASTM D7149 : Practice for Determining the Freeze Thaw Stability of Adhesives

  • ASTM D715 : Test Methods for Analysis of Barium Sulfate Pigment

  • ASTM D7150 : Test Method for the Determination of Gassing Characteristics of Insulating Liquids UnderThermal Stress at Low Temperature

  • ASTM D7151 : Test Method for Determination of Elements in Insulating Oils by Inductively Coupled PlasmaAtomic Emission Spectrometry (ICP AES)

  • ASTM D7152 : Practice for Calculating Viscosity of a Blend of Petroleum Products

  • ASTM D7153 : Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

  • ASTM D7154 : Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

  • ASTM D7156 : Test Method for Evaluation of Diesel Engine Oils in the T 11 Exhaust Gas RecirculationDiesel Engine

  • ASTM D7157 : Test Method for Determination of Intrinsic Stability of Asphaltene Containing Residues,

  • ASTM D7158 : Test Method for Wind Resistance of Sealed Asphalt Shingles(Uplift Force/Uplift ResistanceMethod)

  • ASTM D716 : Test Methods for Evaluating Mica Pigment

  • ASTM D7160 : Practice for Determination of Expiration Dating for Medical Gloves

  • ASTM D7161 : Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves StoredUnder Typical Warehouse Conditions

  • ASTM D7163 : Test Method for Specular Gloss of Printed Matter

  • ASTM D7163-05 : Test Method for Specular Gloss of Printed Matter

  • ASTM D7164 : Practice for On line/At line Heating Value Determination of Gaseous Fuels by GasChromatography

  • ASTM D7164-05 : Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography

  • ASTM D7165 : Practice for Gas Chromatograph Based On line/At line Analysis for Sulfur Content of GaseousFuels

  • ASTM D7166 : Practice for Total Sulfur Analyzer Based On line/At line for Sulfur Content of Gaseous Fuels

  • ASTM D7166-05 : Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

  • ASTM D7167 : Guide for Establishing Procedures to Monitor the Performance of Safety Related CoatingService Level III Lining Systems in an Operating Nuclear Power Plant

  • ASTM D7167-05 : Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant

  • ASTM D7169 : Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils andAtmospheric and Vacuum Residues by High Temperature Gas Chromatography

  • ASTM D717 : Test Methods for Analysis of Magnesium Silicate Pigment

  • ASTM D7171 : Test Method for Hydrogen Content of Middle Distillate Petroleum Products by LowResolution Pulsed Nuclear Magnetic Resonance Spectroscopy

  • ASTM D7172 : Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of FineAggregates Using Infrared

  • ASTM D7173 : Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

  • ASTM D7174 : Specification for Preformed Closed Cell Polyolefin Expansion Joint Fillers for Concrete Pavingand Structural Construction

  • ASTM D7175 : Test Method for Determining the Rheological Properties of Asphalt Binder Using a DynamicShear Rheometer

  • ASTM D7177 : Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track SeamedGeomembranes

  • ASTM D7179 : Test Method for Determining Geonet Breaking Force

  • ASTM D718 : Test Methods for Analysis of Aluminum Silicate Pigment

  • ASTM D7180 : Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

  • ASTM D7186 : Practice for Quality Assurance Observation of Roof Construction and Repair

  • ASTM D7187-05 : Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

  • ASTM D7188 : Termninology for Printing Inks, Materials, and Processes

  • ASTM D7188-05 : Terminology for Printing Inks, Materials, and Processes

  • ASTM D7189 : Test Method for Relative Mileage of News Ink on Newsprint

  • ASTM D7189-05 : Test Method for Relative Mileage of News Ink on Newsprint

  • ASTM D719 : Test Methods for Analysis of Diatomaceous Silica Pigment (Withdrawn 2003) NoReplacement

  • ASTM D7190 : Practice to Evaluate Leaching of Water Soluble Materials from Latex Paint Films

  • ASTM D7190-05 : Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

  • ASTM D7191 : Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

  • ASTM D7192 : Test Method for High Speed Puncture Properties of Plastic Films Using Load andDisplacement Sensors

  • ASTM D7196 : Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples

  • ASTM D7197 : Table of Body Measurements for Misses Maternity Sizes Two to Twenty Two (2 22)

  • ASTM D7198 : Specification for Disposable Embalming Gloves for Single Use Applications

  • ASTM D719-91(1999) : Test Methods for Analysis of Diatomaceous Silica Pigment (Withdrawn 2003)

  • ASTM D720 : Test Method for Free Swelling Index of Coal

  • ASTM D7200 : Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines andQuarries, by Phase Contrast Microscopy and Transmission Electron Microscopy

  • ASTM D7201 : Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in theWorkplace, by Phase Contrast Microscopy (with and Option of Transmission Electron Microscopy)

  • ASTM D7202 : Test Method for Determination of Beryllium in the Workplace Using Field Based Extractionand Fluorescence Detection

  • ASTM D7205/D7205M : Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

  • ASTM D7207 : Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Abilityto Protect Sand from Hydraulically Induced Shear Stresses under Bench Scale Conditions

  • ASTM D7209 : Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materialsand Products

  • ASTM D721 : Test Method for Oil Content of Petroleum Waxes

  • ASTM D7212 : An American National Standard Test Method for Low Sulfur in Automotive Fuels by Energy-

  • ASTM D7213 : Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from100 to 615°C by Gas Chromatography

  • ASTM D7215 : An American National Standard Test Method for Calculated Flash Point from Simulated

  • ASTM D7216 : Test Method for Determining Automotive Engine Oil Compatibility with Typical SealElastomers

  • ASTM D7217 : Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using aHigh Frequency, Linear Oscillation (SRV) Test Machine

  • ASTM D722 : Test Method for Grease Resistance of Paper

  • ASTM D72-21 : Test Method for Amount of Material Finer than 200 Sieve in Aggregate (Withdrawn 1937)

  • ASTM D7224 : Test Method for Determining Water Separation Characteristics of Kerosine type AviationTurbine Fuels Containing Additives by Portable Separometer

  • ASTM D7225 : Guide for Blood Cleaning Efficiency of Detergents and Washer Disinfectors

  • ASTM D7227 : Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

  • ASTM D723-43T(1971) : Method of Test for Degree of Staining of Paper by Alkali (Withdrawn 1984)

  • ASTM D7235 : Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary TestMethod Results Using Relevant ASTM Standard Practices

  • ASTM D7236 : An American National Standard Test Method for Flash Point by Small Scale Closed CupTester (RampMethod)1, 2

  • ASTM D724 : Test Method for Surface Wettability of Paper (Angle of Contact Method)

  • ASTM D7241 : Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering

  • ASTM D7252 : Test Method for Polyurethane Raw Materials : Determination of Monomer and Isomers inIsocyanates

  • ASTM D7253 : Test Method for Polyurethane Raw Materials : Determination of Acidity as Acid Number forPolyether Polyols

  • ASTM D7255 : Test Method for Abrasion Resistance of Leather (Rotary Platform, Double Head Method)

  • ASTM D7256/D7256M : Practice for Mechanical Collection and Within System Preparation of a Gross Sample of Coalfrom Moving Streams

  • ASTM D725-64(1971) : Methods of Test for Identification of Wire Sides of Paper (Withdrawn 1979)

  • ASTM D726 : Test Method for Resistance of Nonporous Paper to Passage of Air

  • ASTM D7265 : Specification for Hydrogen Thermophysical Property Tables

  • ASTM D7267 : Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering

  • ASTM D7269 : Test Methods for Tensile Testing of Aramid Yarns

  • ASTM D727 : Test Method for Kerosine Number of Roofing and Flooring Felt by the Vacuum Method

  • ASTM D7-27 : Test Method for Sieve Analysis of Fine and Aggregates (Withdrawn 1938)

  • ASTM D7276 : Guide for Analysis and Interpretation of Test Data for ArticulatingConcrete Block (ACB)

  • ASTM D728-44(1955) : Specification for Vinyl Chloride-Acetate, Molding Compound Resin (Withdrawn 1962)

  • ASTM D729-95 : Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)

  • ASTM D73- : Method of Test for Quantity of Clay in Sand-Clay, Topsoil and Semi-Gravel for Highway Construction (Withdrawn 1929)

  • ASTM D730-52(1955) : Specification for Low and Medium Voltage Pin-Type Lime-Glass Insulators (Withdrawn 1960)

  • ASTM D731 : Test Method for Molding Index of Thermosetting Molding Powder

  • ASTM D732 : Test Method for Shear Strength of Plastics by Punch Tool

  • ASTM D7321 : Test Method for Test Method for Particulate Contamination of Biodiesel B100Blend Stock

  • ASTM D734-60 : Specification for Insulated Wire and Cable; Vinyl Chloride Plastic Insulating Compound (Withdrawn 1962)

  • ASTM D7347 : An American National Standard Test Method for Determination of Ole?n Content in

  • ASTM D7352 : Practice for Direct Push Technology for Volatile Contaminant Loggingwith the MembraneInterface Probe (MIP)1,2

  • ASTM D735-61 : Specification for Elastomer Compounds for Automotive Applications (Withdrawn 1967)

  • ASTM D7361 : Test Method for Accelerated Compressive Creep of Geosynthetic MaterialsBased on Time-

  • ASTM D7363 : Test Method for Determination of Parent and Alkyl Polycyclic Aromatics inSediment PoreWater Using Solid-Phase Microextractionand Gas Chromatography/Mass Spectrometry in SelectedIonMonitoring Mode1,2

  • ASTM D736-54 : Method of Test for Low-Temperature Brittleness of Rubber and Rubber-Like Materials (Withdrawn 1965)

  • ASTM D737 : Test Method for Air Permeability of Textile Fabrics

  • ASTM D738-58 : Methods of Testing and Tolerances for Rope Made from Bast and Leaf Fibers (Withdrawn 1971)

  • ASTM D739-58 : Methods of Testing and Tolerances for Spun, Twisted, or Braided Products Made from Flax Hemp, Ramie or Mixtures Thereof (Withdrawn 1971)

  • ASTM D740 : Specification for Methyl Ethyl Ketone

  • ASTM D7405 : Test Method for Multiple Stress Creep and Recovery (MSCR) of AsphaltBinder Using aDynamic Shear Rheometer1, 2

  • ASTM D7416 : Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (DielectricPermittivity, Time-Resolved DielectricPermittivity with Switching Magnetic Fields, LaserParticleCounter, Microscopic Debris Analysis, and OrbitalViscometer)

  • ASTM D741-66 : Methods of Measuring Dimensions of Rigid Rods Used in Electrical Insulation (Withdrawn 1971)

  • ASTM D74-21 : Test Method for Amount of Material Finer than No, 200 Sieve in Aggregate (Withdrawn 1922)

  • ASTM D7421 : Test Method for Determining Extreme Pressure Properties of LubricatingOils Using High-

  • ASTM D742-46(1955) : Specification for Nonrigid Vinyl Chloride-Acetate Resin Plastics (Withdrawn 1955)

  • ASTM D743-44 : Tentative Specifications for Nonrigid Ethyl Cellulose Plastics (Withdrawn 1947)

  • ASTM D744-49(1955) : Specification for Nonrigid Vinyl Chloride Plastics (Withdrawn 1955)

  • ASTM D745-44 : Specification for Nonrigid Vinyl Butyral Plastics (Withdrawn 1949)

  • ASTM D746 : Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

  • ASTM D7463 : Test Method for Adenosine Triphosphate (ATP) Content of Microorganismsin Fuel,

  • ASTM D747 : Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

  • ASTM D748 : Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica DielectricCapacitors

  • ASTM D749-43(1970) : Method of Calibrating a Light Source Used for Accelerating the Deterioration of Rubber (Withdrawn 1975)

  • ASTM D75 : Practice for Sampling Aggregates

  • ASTM D751 : Test Methods for Coated Fabrics

  • ASTM D7510 : Practice for Performing Detection and Quantitation Estimation and DataAssessment UtilizingDQCALC Software, based on ASTMPractices D6091 and D6512 of Committee D19 on Water1, 2

  • ASTM D752-73(1978) : Specification for Heavy-Duty Block Polychloroprene Jacket for Wire and Cable (Withdrawn 1983)

  • ASTM D753-73(1978) : Specification for General Purpose Polychloroprene Jacket for Wire and Cable (Withdrawn 1983)

  • ASTM D754-80 : Specification for Synthetic Rubber Insulation for Wire and Cable (Withdrawn 1983)

  • ASTM D755-80 : Specification for Synthetic Rubber Insulation for Wire and Cable (Withdrawn 1983)

  • ASTM D756-93 : Practice for Determination of Weight and Shape Changes of Plastics Under Accelerated Service Conditions (Withdrawn 1998)

  • ASTM D757-77 : Method of Test for Incandescence Resistance of Rigid Plastics in a Horizontal Position (Withdrawn 1985)

  • ASTM D758- : Method of Test for Impact Resistance of Plastics as Subnormal and Supernormal Temperatures (Withdrawn 1968)

  • ASTM D7589 : Test Method for Measurement of Effects of Automotive Engine Oils on FuelEconomy ofPassenger Cars and Light-Duty Trucks inSequence VID Spark Ignition Engine1,2

  • ASTM D759-66(1976) : Practice for Conducting Physical Property Tests of Plastics at Subnormal and Supernormal Temperatures (Withdrawn 1982)

  • ASTM D7597 : Test Method for Determination of Diisopropyl Methylphosphonate, EthylHydrogenDimethylamidophosphate, EthylMethylphosphonic Acid, Isopropyl MethylphosphonicAcid,Methylphosphonic Acid and Pinacolyl MethylphosphonicAcid in Water by Liquid Chromat

  • ASTM D760- : Specification for Enclosures and Servicing Units for Tests Above and Below Room Temperatures (Withdrawn 1951)

  • ASTM D761- : Specification for Enclosures and Servicing Units for Tests Above and Below Room Temperatures (Withdrawn 1951)

  • ASTM D7616D7616M : Test Method for Determining Apparent Overlap Splice Shear StrengthProperties of Wet Lay-

  • ASTM D7619 : Test Method for Sizing and Counting Particles in Light and Middle DistillateFuels, byAutomatic Particle Counter1,2

  • ASTM D762- : Method of Test for Hot Extraction of Asphaltic Materials and Recovery of Bitumen by the Modified Abson Procedure (Withdrawn 1964)

  • ASTM D7621 : IP 570Test Method for Determination of Hydrogen Sul?de in Fuel Oils by RapidLiquid PhaseExtraction1, 2

  • ASTM D7624 : Test Method for Condition Monitoring of Nitration in In-Service Petroleumand Hydrocarbon-

  • ASTM D763 : Specification for Raw and Burnt Umber Pigments

  • ASTM D764- : Specification for Raw Burnt Umber (Withdrawn 1947)

  • ASTM D7645 : Test Method for Determination of Aldicarb, Aldicarb Sulfone, AldicarbSulfoxide, Carbofuran,

  • ASTM D765 : Specification for Raw and Burnt Sienna Pigments

  • ASTM D766- : Specification for Raw and Burnt Sienna (Withdrawn 1947)

  • ASTM D767-52(1955) : Specification for Venetion Red (Withdrawn 1975)

  • ASTM D768 : Specification for Yellow Iron Oxide Hydrated

  • ASTM D769 : Specification for Black Synthetic Iron Oxide

  • ASTM D77- : Specification for Raw Linseed Oil (Withdrawn 1926)

  • ASTM D770 : Specification for Isopropyl Alcohol

  • ASTM D771-47 : Method of Test for Daylight 45 Degree, 0 Degree Luminus Directional Reflectance of Paint Finishes (Withdrawn 1954)

  • ASTM D772 : Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints

  • ASTM D773-44T(1970) : Method of Test for Adhesiveness of Gummed Tape (Withdrawn 1980)

  • ASTM D774/D774M : Test Method for Bursting Strength of Paper

  • ASTM D7742 : Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3#n# 18) andOctylphenol Polyethoxylates (OPnEO, 2# n#12) in Water by Single Reaction Monitoring (SRM)

  • ASTM D7755 : Practice for Determining the Wear Volume on Standard Test Pieces Usedby High-Frequency,

  • ASTM D775-80(1986) : Method for Drop Test for Loaded Boxes (Withdrawn 1993)

  • ASTM D776 : Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board

  • ASTM D777 : Test Methods for Flammability of Treated Paper and Paperboard

  • ASTM D778 : Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (HotExtraction andCold Extraction Procedures)

  • ASTM D779 : Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by theDry Indicator Method

  • ASTM D7797 : 583Test Method forDetermination of the Fatty Acid Methyl Esters Content ofAviation Turbine FuelUsing Flow Analysis by FourierTransform Infrared Spectroscopy / Rapid ScreeningMethod1,2

  • ASTM D78- : Specification for Boiled Linseed (Withdrawn 1927)

  • ASTM D780 : Test Method for Printing Ink Permeation of Paper (Castor Oil Test)

  • ASTM D781-68(1973) : Method of Test for Puncture and Stiffness of Paperboard, Corrugated and Solid Fiberboard (Withdrawn 1984)

  • ASTM D7823 : Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride)

  • ASTM D7828 : Test Method for Determination of Residue Composition in Lique?edPetroleum Gas (LPG)

  • ASTM D782-82(1993)e1 : Test Methods for Shipping Containers in Revolving Hexagonal Drum (Withdrawn 1999)

  • ASTM D783- : Tentative Method of Test for Water-Vapor Permeability of Paper and Paperboard (Withdrawn 1947)

  • ASTM D7843 : Test Method for Measurement of Lubricant Generated Insoluble ColorBodies in In-Service

  • ASTM D785 : Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

  • ASTM D786-80 : Specification for Cellulose Acetate Plastic Sheets (Withdrawn 1981)

  • ASTM D787 : Specification for Ethyl Cellulose Molding and Extrusion Compounds

  • ASTM D788 : Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and ExtrusionCompounds

  • ASTM D789 : Test Methods for Determination of Relative Viscosity of Polyamide (PA)

  • ASTM D79 : Specification for Zinc Oxide Pigments

  • ASTM D790 : Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and ElectricalInsulating Materials

  • ASTM D791-54 : Method of Test for Luminous Reflectance, Transmittance, and Color of Materials (Withdrawn 1966)

  • ASTM D793-44T(1976) : Method of Test for Short-Time Stability at Elevated Temperatures of Plastics Containing Chlorine (Withdrawn 1981)

  • ASTM D794-93 : Practice for Determining Permanent Effect of Heat on Plastics (Withdrawn 1998)

  • ASTM D795-65 : Recommended Practice for Accelerated Weathering of Plastics Using S-1 (Withdrawn 1970)

  • ASTM D796-87A : Practice for Compression Molding Test Specimens of Phenolic Molding Compounds (Withdrawn 1992)

  • ASTM D797-82(1989) : Test Method for Rubber Property-Young’s Modulus at Normal and Subnormal Temperatures (Withdrawn 1994)

  • ASTM D798- : Specifications and Methods of Test for Sponge and Expanded Cellular Rubber Products (Withdrawn 1948)

  • ASTM D799-74(1995) : Specification for Liquid Toilet Soap (Withdrawn 2000)

  • ASTM D8 : Terminology Relating to Materials for Roads and Pavements

  • ASTM D800 : Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

  • ASTM D801 : Test Methods for Sampling and Testing Dipentene

  • ASTM D802 : Test Methods for Sampling and Testing Pine Oils

  • ASTM D803 : Test Methods for Testing Tall Oil

  • ASTM D805-72 : Methods of Resting Veneer, Plywood, and Other Glued Veneer Constructions (Withdrawn 1975)

  • ASTM D806 : Test Method for Cement Content of Hardened Soil Cement Mixtures

  • ASTM D80-61(1974) : Specification for Leaded Zinc Oxide (Withdrawn 1980)

  • ASTM D807 : Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement(USBM Embrittlement Detector Method)

  • ASTM D808 : Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)

  • ASTM D809- : Method of Test for Phosphorous in Lubricating Oils, Lubricating Oil Additives and their Concentrates (Withdrawn 1951)

  • ASTM D81 : Specification for Basic Carbonate White Lead Pigment

  • ASTM D810- : Methods of Test for Sulfated Residue, Lead, Iron and Copper in Lubricating Oils (Withdrawn 1962)

  • ASTM D811-82 : Methods of Chemical Analysis for Metals in New and Used Lubricating Oils (Withdrawn 1987)

  • ASTM D812- : Specification for GR-S (Synthetic Rubber) Sheath Compound for Electrical Insulated Cords and Cables Where Extreme Abrasion Resistance is Not Required (Withdrawn 1947)

  • ASTM D813 : Test Method for Rubber Deterioration Crack Growth

  • ASTM D814 : Test Method for Rubber Property Vapor Transmission of Volatile Liquids

  • ASTM D815-81 : Method of Testing Coated Fabrics Hydrogen Permeance (Withdrawn 1987)

  • ASTM D816 : Test Methods for Rubber Cements

  • ASTM D817 : Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

  • ASTM D818- : Specification for Natural Rubber Cups for Use in Hydraulic Actuating Cylinders (Withdrawn 1952)

  • ASTM D819- : Specification for Cast Allyl Plastic Sheets, Rods, Tubes, and Shapes (Withdrawn 1958)

  • ASTM D820 : Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents

  • ASTM D821-45T(1974) : Method of Evaluating Degree of Abrasion, Erosion, or a Combination of Both in Road Service Test of Traffic Paints (Withdrawn 1983)

  • ASTM D822 : Practice for Filtered Open Flame Carbon Arc Exposures of Paint and Related Coatings

  • ASTM D823 : Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Productson Test Panels

  • ASTM D824 : Test Method for Rate of Absorption of Water by Bibulous Papers

  • ASTM D82-44(1974) : Specification for Basic Sulfate White Lead (Withdrawn 1980)

  • ASTM D825-54(1961) : Methods of Test for Ply Adhesion of Paper (Withdrawn 1973)

  • ASTM D826-45T(1971) : Methods of Test of Degree of Wet Curl of Paper (Withdrawn 1984)

  • ASTM D827-67(1971) : Method of Test for Edge Tearing Strength of Paper (Withdrawn 1980)

  • ASTM D828 : Test Method for Tensile Properties of Paper and Paperboard Using Constant Rate ofElongation Apparatus

  • ASTM D829 : Test Methods for Wet Tensile Breaking Strength of Paper and Paper Products

  • ASTM D83 : Specification for Red Lead Pigment

  • ASTM D830- : Method of Test for Water Vapor Permeability of Paper and Paperboard (Withdrawn 1947)

  • ASTM D831 : Test Method for Gas Content of Cable and Capacitor Oils

  • ASTM D832 : Practice for Rubber Conditioning For Low Temperature Testing

  • ASTM D833-46(1955) : Methods of Identification and Quantitative Analysis of Synthetic Elastomers (Withdrawn 1959)

  • ASTM D834-59(1979) : Methods of Test for Free Ammonia in Phenol-Formaldehyde Molded Materials (Withdrawn 1983)

  • ASTM D835-95 : Specification for Refined Benzene-485 (Withdrawn 1997)

  • ASTM D836-84 : Specification for Industrial Grade Benzene (Withdrawn 1989)

  • ASTM D837-56 : Specification for Industrial 90 Benzene (Withdrawn 1962)

  • ASTM D838-71 : Specification for Refined Solvent Naphtha (Withdrawn 1976)

  • ASTM D839-50(1971) : Specification for Crude Light Solvent Naphtha (Withdrawn 1973)

  • ASTM D840-50(1971) : Specification for Crude Heavy Solvent Naphtha (Withdrawn 1974)

  • ASTM D841 : Specification for Nitration Grade Toluene

  • ASTM D842-50(1958) : Specification for Industrial Grade Toluene (Withdrawn 1962)

  • ASTM D843 : Specification for Nitration Grade Xylene

  • ASTM D844-50(1954) : Specification for Industrial Grade Xylene (Withdrawn 1962)

  • ASTM D84-51(1974) : Specification for Red and Brown Iron Oxide Pigments (Withdrawn 1978)

  • ASTM D845-77 : Specification for Five-Degree Xylene (Withdrawn 1980)

  • ASTM D846-84 : Specification for Ten-Degree Xylene (Withdrawn 1989)

  • ASTM D847 : Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and SimilarIndustrial Aromatic Hydrocarbons

  • ASTM D848 : Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons

  • ASTM D849 : Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

  • ASTM D85 : Specification for Ochre Pigment

  • ASTM D850 : Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

  • ASTM D851-45(1972) : Method of Test for Paraffins in Industrial Aromatic Hydrocarbons (Withdrawn 1972)

  • ASTM D853 : Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of IndustrialAromatic Hydrocarbons

  • ASTM D854 : Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

  • ASTM D855-52(1973) : Method of Analysis of Oil-Soluble Sodium Petroleum Sulfonates (Withdrawn 1977)

  • ASTM D856-49(1987) : Method of Sampling and Testing Pine Tars and Pine-Tar Oils (Withdrawn 1991)

  • ASTM D857 : Test Method for Aluminum in Water

  • ASTM D858 : Test Methods for Manganese in Water

  • ASTM D86 : Test Method for Distillation of Petroleum Products at Atmospheric Pressure

  • ASTM D860-51(1971) : Method of Sampling Water from Boilers (Withdrawn 1974)

  • ASTM D861 : Practice for Use of the Tex System to Designate Linear Density of Fibers, YarnIntermediates, and Yarns

  • ASTM D862-57 : Methods of Test for Evaluating Treated Textiles for Permanence of Resistance to Microorganisms (Withdrawn 1971)

  • ASTM D863- : Method of Measuring the Flow of Properties of Thermoplastic Molding Materials (Withdrawn 1947)

  • ASTM D864-52(1976) : Method of Test for Coefficient of Cubical Thermal Expansion of Plastics (Withdrawn 1988)

  • ASTM D865 : Test Method for Rubber Deterioration by Heating in Air (Test Tube Enclosure)

  • ASTM D866 : Specification for Crosslinked Styrene Butadiene (SBR) Synthetic Rubber Jacket for Wire andCable

  • ASTM D869 : Test Method for Evaluating Degree of Settling of Paint

  • ASTM D87 : Test Method for Melting Point of Petroleum Wax (Cooling Curve)

  • ASTM D870 : Practice for Testing Water Resistance of Coatings Using Water Immersion

  • ASTM D871 : Test Methods of Testing Cellulose Acetate

  • ASTM D872 : Withdrawn 1991 : Test Method for Sulfonation Index of Road Tars

  • ASTM D874 : Test Method for Sulfated Ash from Lubricating Oils and Additives

  • ASTM D875-62(1978) : Method for Calculating of Olefins and Aromatics in Petroleum Distillates from Bromine Number and Acid Absorption (Withdrawn 1984)

  • ASTM D877 : Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

  • ASTM D878 : Test Method for Inorganic Chlorides and Sulfates in Insulating Oils

  • ASTM D879-62(1976) : Specification for Communication and Signal Pin-Type Lime-Glass Insulators (Withdrawn 1981)

  • ASTM D880 : Test Method for Impact Testing for Shipping Containers and Systems

  • ASTM D881-90 : Test Method for Deviation of Line of Sight Through Transparent Plastics (Withdrawn 1995)

  • ASTM D882 : Test Method for Tensile Properties of Thin Plastic Sheeting

  • ASTM D883 : Terminology Relating to Plastics

  • ASTM D884-58 : Methods of Estimating Blocking of Plastic Sheets (Withdrawn 1961)

  • ASTM D885 : Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made fromManufactured Organic Base Fibers

  • ASTM D885M-95 : Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers (Metric) (Withdrawn 1998)

  • ASTM D886-61 : Methods of Impregnation & Penetration of Glass Yarn with Insulating Varnish (Withdrawn 1972

  • ASTM D888 : Test Methods for Dissolved Oxygen in Water

  • ASTM D889 : Test Method for Volatile Oil in Rosin

  • ASTM D890 : Test Method for Water in Liquid Naval Stores

  • ASTM D893 : Test Method for Insolubles In Used Lubricating Oils

  • ASTM D894- : Methods of Sulfur in Petroleum Products and Lubricating Oils by Bomb Method (Withdrawn 1949)

  • ASTM D895-94 : Test Method for Water Vapor Permeability of Packages (Withdrawn 1999)

  • ASTM D896 : Practice for Resistance of Adhesive Bonds to Chemical Reagents

  • ASTM D897 : Test Method for Tensile Properties of Adhesive Bonds

  • ASTM D898 : Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids

  • ASTM D898-96 : Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids (Withdrawn 2005)

  • ASTM D899 : Practice for Applied Weight Per Unit Area of Liquid Adhesive

  • ASTM D900-60(1970) : Methods of Calorific Value of Gaseous Fuels by the Water-Flow Calorimeter (Withdrawn 1973)

  • ASTM D901 : Test Methods for Askarels (Withdrawn 2004) No Replacement 0 ASTM 0

  • ASTM D901-91(1997) : Test Methods for Askarels (Withdrawn 2004)

  • ASTM D902 : Test Methods for Flexible Resin Coated Glass Fabrics and Glass Fabric Tapes Used forElectrical Insulation

  • ASTM D903 : Test Method for Peel or Stripping Strength of Adhesive Bonds

  • ASTM D904 : Practice for Exposure of Adhesive Specimens to Artificial Light

  • ASTM D905 : Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

  • ASTM D90-55 : Method of Test for Sulfur in Petroleum Produced by the Gravmetric Method (Withdrawn 1957)

  • ASTM D906 : Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear byTension Loading

  • ASTM D907 : Termninology of Adhesives

  • ASTM D908-67 : Method of Test for Knock Characteristics of Motor Fuels of 100 Octane Number and Below by the Research Method (Withdrawn 1968)

  • ASTM D91 : Test Method for Precipitation Number of Lubricating Oils

  • ASTM D910 : Specification for Aviation Gasolines

  • ASTM D911-87 : Specification for Mercuric Oxide for Use in Antifouling Paints (Withdrawn 1994)

  • ASTM D912 : Specification for Cuprous Oxide for Use in Antifouling Paints (Withdrawn 2004) NoReplacement

  • ASTM D912-81(1999) : Specification for Cuprous Oxide for Use in Antifouling Paints (Withdrawn 2004)

  • ASTM D914 : Test Methods for Ethylcellulose

  • ASTM D915-61(1978) : Methods for Testing Soil-Bituminous Mixtures (Withdrawn 1986)

  • ASTM D916- : Method of Test for Shear Strength of Flexible Road Surfaces, Subgrades, and Fills by the Burggraf Shear Apparatus (Withdrawn 1963)

  • ASTM D917-74 : Method of Bleeding Resistance of Asphalted Paper at 65 Deg C (Withdrawn 1980)

  • ASTM D918 : Test Method for Blocking Resistance of Paper and Paperboard

  • ASTM D919 : Test Method for Copper Number of Paper and Paperboard

  • ASTM D920-81(1989) : Method of Test for Blocking Resistance of Paper and Paperboard (Withdrawn 1988)

  • ASTM D921-58(1970) : Method of Test for Titanium Dioxide in Paper (Withdrawn 1979)

  • ASTM D923 : Practices for Sampling Electrical Insulating Liquids

  • ASTM D924 : Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (DielectricConstant) of Electrical Insulating Liquids

  • ASTM D925 : Test Methods for Rubber Property Staining of Surfaces (Contact, Migration, and Diffusion)

  • ASTM D926 : Test Method for Rubber Property/Plasticity and Recovery (Parallel Plate Method)

  • ASTM D927-57 : Method of Test for Viscosity of Rubber and Rubber-Like Materials by the Shearing Disc Viscometer (Withdrawn 1958)

  • ASTM D928 : Specification for Sodium Bicarbonate

  • ASTM D928-87(1998) : Specification for Sodium Bicarbonate (Withdrawn 2001)

  • ASTM D929-85(1997) : Specification for Borax (Withdrawn 2001)

  • ASTM D930-89(1996)e1 : Test Method of Total Immersion Corrosion Test of Water-Soluble Aluminum Cleaners (Withdrawn 2001)

  • ASTM D931- : Method of Test for Thiophene in Benzene (Withdrawn 1955)

  • ASTM D932 : Test Method for Iron Bacteria in Water and Water Formed Deposits

  • ASTM D933 : Practice for Reporting Results of Examination and Analysis of Water Formed Deposits

  • ASTM D934 : Practices for Identification of Crystalline Compounds in Water Formed Deposits By X RayDiffraction

  • ASTM D935-66 : Method of Corrosivity Test of Industrial Water (Withdrawn 1967)

  • ASTM D936-89 : Method of Test for Aromatic Hydrocarbons in Olefin-Free Gasolines by Silica Gel Absorption (Withdrawn 1990)

  • ASTM D939-54 : Method of Test for Saponification Number by Potentiometric Titration (Withdrawn 1962)

  • ASTM D940- : Method of Determination of Purity by Measurement of Freezing Points (Withdrawn 1948)

  • ASTM D941-88 : Test Method for Density and Relative Density (Specific Gravity) of Liquids by Lipkin Bicapillary Pycnometer (Withdrawn 1993)

  • ASTM D942 : Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method

  • ASTM D943 : Test Method for Oxidation Characteristics of Inhibited Mineral Oils

  • ASTM D944-50(1955) : Specification for Mechanical Roll Felt (Withdrawn 1965)

  • ASTM D945 : Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

  • ASTM D946 : Specification for Penetration Graded Asphalt Cement for Use in Pavement Construction

  • ASTM D947-54 : Specification for Hot-Mixed, Hot-Laid Asphaltic Concrete for Base and Surface Courses (Withdrawn 1959)

  • ASTM D948- : Method of Test for Weight Loss of Plastics on Heating (Withdrawn 1953)

  • ASTM D95 : Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

  • ASTM D950 : Test Method for Impact Strength of Adhesive Bonds

  • ASTM D950-98 : Test Method for Impact Strength of Adhesive Bonds (Withdrawn 2003)

  • ASTM D951 : Test Method for Water Resistance of Shipping Containers by Spray Method

  • ASTM D952 : Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical InsulatingMaterials

  • ASTM D953 : Test Method for Bearing Strength of Plastics

  • ASTM D954-50(1961) : Methods of Test for Apparent Density and Bulk Factor of Nonpouring Molding Powers (Withdrawn 1961)

  • ASTM D955 : Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

  • ASTM D956-87 : Practice for Compression Molding Specimens of Amino Molding Compounds (Withdrawn 1992)

  • ASTM D957 : Practice for Determining Surface Temperature of Molds for Plastics

  • ASTM D958-88 : Practice for Determining Temperatures of Standard Molds for Test Specimens of Plastics (Withdrawn 1995)

  • ASTM D959-80(1986) : Method of Drop Test for Filled Bags (Withdrawn 1993)

  • ASTM D960 : Specification for Raw Castor Oil

  • ASTM D961 : Specification for Dehydrated Castor Oil

  • ASTM D962 : Specification for Aluminum Powder and Paste Pigments for Paints

  • ASTM D963-81(1986) : Specification for Copper Phthalcoyanine Blue Pigment (Withdrawn 1993)

  • ASTM D964 : Specification for Metallic Copper Powder for Use in Antifouling Paints

  • ASTM D965-59 : Specification for Heavy Petroleum Spirits (Heavy Mineral Spirts) (Withdrawn 1960)

  • ASTM D966-58(1975) : Specification for Secondary Butyl Acetate (85 to 88 Percent Grade) (Withdrawn 1980)

  • ASTM D967- : Tentative Method of Testing Drying Oils (Withdrawn 1950)

  • ASTM D968 : Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

  • ASTM D96-88(1998) : Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field Procedure) (Withdrawn 2000)

  • ASTM D969 : Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint

  • ASTM D970 : Test Methods for Para Red and Toluidine Red Pigments (Withdrawn 2003) No Replacement 0 ASTM 0

  • ASTM D970-86(1999) : Test Methods for Para Red and Toluidine Red Pigments (Withdrawn 2003)

  • ASTM D971 : Test Method for Interfacial Tension of Oil Against Water by the Ring Method

  • ASTM D972 : Test Method for Evaporation Loss of Lubricating Greases and Oils

  • ASTM D973-59 : Method of Test for Butadiene Content of Polymerization Grade Butadiene and Butadiene Concentrate (Withdrawn 1968)

  • ASTM D975 : Specification for Diesel Fuel Oils

  • ASTM D976 : Test Methods for Calculated Cetane Index of Distillate Fuels

  • ASTM D978-52(1955) : Specification for Asphaltic Mixtures for Sheet Asphalt Pavements (Withdrawn 1959)

  • ASTM D979 : Practice for Sampling Bituminous Paving Mixtures

  • ASTM D98 : Specification for Calcium Chloride

  • ASTM D980- : Method of Sampling and Analysis of Coal for Volatile Matter Determination in Connection with Smoke Ordinance (Withdrawn 1964)

  • ASTM D981-51(1956) : Methods of Testing Analytical Filter Papers (Withdrawn 1973)

  • ASTM D982 : Test Method for Organic Nitrogen in Paper and Paperboard

  • ASTM D982-63(1971) : Method of Test for Organic Nitrogen in Paper and Paperboard (Withdrawn 1980)

  • ASTM D983- : Method of 45-Degree, 0-Degree Directional Reflectance for Blue Light (Brightness) of Paper (Withdrawn 1980)

  • ASTM D984 : Test Methods for Reducible Sulfur in Paper

  • ASTM D985 : Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457nm)

  • ASTM D986- : Method of Preparation of a Magnesium Oxide Standard for Spectral Reflectivity (Withdrawn 1965)

  • ASTM D987- : Method of Test for Stretch of Paper and Paper Products Under Tension (Withdrawn 1968)

  • ASTM D988-51(1955) : Methods of Test for Water Vapor Permeability of Paper and Paperboard (Withdrawn 1957)

  • ASTM D989- : Method of Test for Detection of Free Sulfur in Electrical Insulating Oils (Withdrawn 1966)

  • ASTM D990-54(1970) : Recommended Practice for Interlaboratory Testing of Textile Materials (Withdrawn 1973)

  • ASTM D991 : Test Method for Rubber Property Volume Resistivity Of Electrically Conductive and AntistaticProducts

  • ASTM D99-26 : Specification for Asphalt Cement, 40 to 50 Penetration, for Use in Sheet Asphalt and Asphaltic Concrete Pavements and as Filler for Brick and Block Pavements (Withdrawn 1939)

  • ASTM D992-71(1978) : Method of Test for Nitrate Ion in Water (Withdrawn 1983)

  • ASTM D993-58(1979) : Method of Sulfate-Reducing Bacteria in Water and Water-Formed Deposits (Withdrawn 1986)

  • ASTM D994 : Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

  • ASTM D995 : Specification for Mixing Plants for Hot Mixed, Hot Laid Bituminous Paving Mixtures

  • ASTM D996 : Terminology of Packaging and Distribution Environments

  • ASTM D997-80(1986) : Method for Drop Test for Loaded Cylindrical Containers (Withdrawn 1993)

  • ASTM D998-94 : Test Method for Penetration of Liquids into Submerged Loaded Shipping Containers (Withdrawn 1999)

  • ASTM D999 : Methods for Vibration Testing of Shipping Containers

    • Company Info :

    퍼포먼스네트워크(주)

    강남사무소 : 서울특별시 강남구 영동대로 118길 3,(삼성동, 시몽빌딩1층)
    Tel : 02-980-9800(대표전화)
    E-Mail: info @ anytest.co.kr (Technical,시험인증)

    ALT_TEXT
    QR Code Generator
    • ASTM E283 – 04 (2012) 공기누설 시험2014년 January 10일 - 2:28 pm

      [공기누설특성 시험] ASTM E283 – 04(2012) Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen  

    • MIL-Spec Documents2013년 December 11일 - 6:40 pm

      MIL-Spec, MIL-STD 자료 상담 MIL-Spec Download(미 군사 규격 및 표준) 상담 및 안내 [ 바로가기 ] 기타 지원이 필요한 경우 상담 바랍니다.

    • MIL-STD-810G 시험항목2017년 August 18일 - 12:43 pm

      아래는 MIL-STD-810G Part Two (II)에서 기술된 시험방법들 입니다. MIL-STD-810G Method 500.6 Low Pressure (Altitude) MIL-STD-810G Method 501.6 High Temperature MIL-STD-810G Method 502.6 Low Temperature MIL-STD-810G Method 503.6 Temperature Shock MIL-STD-810G Method 504.2 Contamination by Fluids MIL-STD-810G Method 505.6 Solar Radiation (Sunshine) MIL-STD-810G Method 506.6 Rain MIL-STD-810G Method 507.6 Humidity MIL-STD-810G Method 508.7 Fungus MIL-STD-810G Method […]

    • IP Code2016년 April 12일 - 6:42 pm

      IP Code에 대한 이해 IP 5K4K란?   IP Code는 보통 international protection Code로 알리어지거나 또는 Ingress protection으로 불려지고 있다. 모두 먼지와 물의 침투에 관한 등급 표기 방식이다. 각 규격 별로 약간의 다른 등급표기가 있으나 의미상 내용은 크게 다르지 않으나 유사한 세부적 분류의 표기법이 있다. 다음은 규격의 전부 또는 일부로써 IP code를 다루고 있는 규격 사례들이며 […]

    • ASTM E119 Fire Testing2016년 March 25일 - 8:01 pm

      ASTM E 119 –  건물 건축 및 건축 재료의 화재 시험을 위한 표준 시험 방법 ASTM E84,  NFPA 285, UL 790, BS 476-6/7, NF P92-507, DIN 4102, EN 13501, GB 8624, BS 476-20，EN 1363 등 있으나 ASTM E119은 이들 보다 특별한 시험이다.   ASTM E 119 적용대상 Bearing Walls and Partitions Columns Floors and Roofs […]

    November 2024
    M T W T F S S
    « Aug    
     123
    45678910
    11121314151617
    18192021222324
    252627282930  
    © Copyright - [AP Network 인증원-해외 제품 시험인증 상담 | ASTM | MIL-STD-810 | 자동차 OEM 규격시험 | DIN | EN, GOST-R | TEST & CERTIFICATE | - Webpage built up by Performancenetwork Inc.