22. MISCELLANEOUS MATERIALS
22. MISCELLANEOUS MATERIALS
22-1) ANSI A108.10-2009 ; Installation of Grout in Tilework;
22-2) ANSI A108.1-2009 ; Specification for the Installation of Ceramic Tile with Portland Cement Mortar;
22-3) ANSI A108.4-2009 ; Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive;
22-4) ANSI A108.5-2009 ; Installation of Ceramic Tile with Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar;
22-5) ANSI A108.6-2009 ; Installation of Ceramic Tile with Chemical Resistant, Water Cleanable Tile Setting and Grouting Epoxy;
22-6) ANSI A108.7-2009 ; Specification for Electrically Conductive Ceramic Tile Installed with Conductive Dry-Set Portland Cement Mortar;
22-7) ANSI A108.8-2009 ; Installation of Ceramic Tile with Chemical Resistant Furan Mortar and Grout;
22-8) ANSI A108.9-2009 ; Installation of Ceramic Tile with Modified Epoxy Emulsion Mortar/Grout;
22-9) ANSI A118.1-2009 ; Specification for Dry-Set Portland Cement Mortar;
22-10) ANSI A118.2-2009 ; Specifications for Conductive Dry-set Portland Cement Mortar;
22-11) ANSI A118.3-2009 ; Specifications for Chemical Resistant Water Cleanable Tile Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive;
22-12) ANSI A118.4-2009 ; Specifications Furan Latex – Portland Cement Mortar;
22-13) ANSI A118.5-2009 ; Specifications for Chemical Resistant Furan;
22-14) ANSI A118.6-2009 ; Specifications for Ceramic Tile Grouts;
22-15) ANSI A118.8-2009 ; Specifications for Modified Epoxy Emulsion Mortar/Grout;
22-16) ANSI A136.1-2009 ; Organic Adhesives for Installation of Ceramic Tile;
22-17) ANSI A137.1-2008 ; Specification for Ceramic Tile;
22-18) ANSI A137.1-2008 ; Specifications for Ceramic Tile;
22-19) ANSI Z 97.1-2009 ; Safety Performance Specifications and Methods of Tests for Transport Safety Glazing Materials Used in Building;
22-20) ASTM A116 – 05 ASTM A121 – 07 ; Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
22-21) ASTM A121 – 07 ; Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
22-22) ASTM A368 – 95a(2009) ; 스테인레스 스틸 와이어 물가에 대한 표준 규격
22-23) ASTM A392 – 07 ; Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
22-24) ASTM A475 – 03(2009)e1 ; Standard Specification for Zinc-Coated Steel Wire Strand
22-25) ASTM A492 – 95(2009) ; 스테인레스 스틸 와이어 로프에 대한 표준 규격
22-26) ASTM A510 – 08 ; Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, 탄소강
22-27) ASTM A586 – 04a(2009)e1 ; Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
22-28) ASTM A603 – 98(2009)e1 ; Standard Specification for Zinc-Coated Steel Structural Wire Rope
22-29) ASTM A817 – 07 ; Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
22-30) ASTM A824 – 01(2007) ; 체인 연결 담 사용을위한 금속 입히는 강철 Marcelled 텐션 와이어에 대한 표준 규격
22-31) ASTM C1014 – 08 ; Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
22-32) ASTM C1029 – 09 ; Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
22-33) ASTM C1036 – 06 ; Standard Specification for Flat Glass
22-34) ASTM C1048 – 04 ; Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass
22-35) ASTM C1071 – 05e1 ; Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
22-36) ASTM C1193 – 09 ; Standard Guide for Use of Joint Sealants
22-37) ASTM C1193 – 09 ; Standard Guide for Use of Joint Sealants
22-38) ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
22-39) ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
22-40) ASTM C1363 – 05 ; Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
22-41) ASTM C167 – 09 ; Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
22-42) ASTM C177 – 04 ; Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
22-43) ASTM C195 – 07 ; Standard Specification for Mineral Fiber Thermal Insulating Cement
22-44) ASTM C196 – 00(2005) ; Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
22-45) ASTM C208 – 08a ; Standard Specification for Cellulosic Fiber Insulating Board
22-46) ASTM C209 – 07ae1 ; Standard Test Methods for Cellulosic Fiber Insulating Board
22-47) ASTM C240 – 08e1 ; Standard Test Methods of Testing Cellular Glass Insulation Block
22-48) ASTM C335 – 05ae1 ; Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
22-49) ASTM C411 – 05 ; Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
22-50) ASTM C449 – 07 ; Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
22-51) ASTM C509 – 06 ; Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
22-52) ASTM C516 – 08 ; Standard Specification for Vermiculite Loose Fill Thermal Insulation
22-53) ASTM C518 – 04 ; Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
22-54) ASTM C520 – 04 ; Standard Test Methods for Density of Granular Loose Fill Insulations
22-55) ASTM C533 – 09 ; Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
22-56) ASTM C534 / C534M – 08 ; Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
22-57) ASTM C542 – 05 ; Standard Specification for Lock-Strip Gaskets
22-58) ASTM C547 – 07e1 ; Standard Specification for Mineral Fiber Pipe Insulation
22-59) ASTM C549 – 06 ; Standard Specification for Perlite Loose Fill Insulation
22-60) ASTM C552 – 07 ; Standard Specification for Cellular Glass Thermal Insulation
22-61) ASTM C553 – 08 ; Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
22-62) ASTM C564 – 09a ; Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
22-63) ASTM C578 – 09e1 ; Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
22-64) ASTM C591 – 09 ; Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
22-65) ASTM C592 – 08a ; Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
22-66) ASTM C610 – 09e1 ; Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
22-67) ASTM C612 – 09 ; Standard Specification for Mineral Fiber Block and Board Thermal Insulation
22-68) ASTM C665 – 06 ; Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
22-69) ASTM C716 – 06 ; Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
22-70) ASTM C719 – 93(2005) ; Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
22-71) ASTM C726 – 05e1 ; Standard Specification for Mineral Fiber Roof Insulation Board
22-72) ASTM C728 – 05(2010) ; Standard Specification for Perlite Thermal Insulation Board
22-73) ASTM C739 – 08 ; Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
22-74) ASTM C764 – 07 ; Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
22-75) ASTM C794 – 06 ; Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
22-76) ASTM C834 – 10 ; Standard Specification for Latex Sealants
22-77) ASTM C864 – 05 ; Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
22-78) ASTM C916 – 85(2007) ; Standard Specification for Adhesives for Duct Thermal Insulation
22-79) ASTM C919 – 08 ; Standard Practice for Use of Sealants in Acoustical Applications
22-80) ASTM C920 – 08 ; Standard Specification for Elastomeric Joint Sealants
22-81) ASTM C991 – 08e1 ; Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
22-82) ASTM D1003 – 07e1 ; Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
22-83) ASTM D1044 – 08 ; Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
22-84) ASTM D1204 – 08 ; Standard Test Method for Linear Dimensional Changes of Nonrigid
22-85) ASTM D1327 – 04 ; Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
22-86) ASTM D146 – 04 ; Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
22-87) ASTM D1593 – 09 ; Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
22-88) ASTM D1668 – 97a(2006) ; Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
22-89) ASTM D173 – 03 ; Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
22-90) ASTM D2103 – 08 ; Standard Specification for Polyethylene Film and Sheeting
22-91) ASTM D2126 – 09 ; Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
22-92) ASTM D2178 – 04 ; Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
22-93) ASTM D226 / D226M – 09 ; Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
22-94) ASTM D227 – 03 ; Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
22-95) ASTM D25 – 99(2005) ; Standard Specification for Round Timber Piles
22-96) ASTM D2626 – 04 ; Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
22-97) ASTM D2628 – 91(2005) ; Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
22-98) ASTM D2842 – 06 ; Standard Test Method for Water Absorption of Rigid Cellular Plastics
22-99) ASTM D2843 – 10 ; Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
22-100) ASTM D3294 – 09 ; Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
22-101) ASTM D3406 – 95(2006) ; Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
22-102) ASTM D3468 – 99(2006)e1 ; Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
22-103) ASTM D3667 – 05 ; Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
22-104) ASTM D3678 – 97(2008)e1 ; Standard Specification for Rigid Poly(염화 비닐) (PVC) Interior-Profile Extrusions
22-105) ASTM D3679 – 09a ; Standard Specification for Rigid Poly(염화 비닐) (PVC) Siding
22-106) ASTM D3771 – 03(2007) ; Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
22-107) ASTM D3832 – 79(2006) ; Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
22-108) ASTM D3841 – 97(2008)e1 ; Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
22-109) ASTM D41 – 05 ; Standard Specification for Asphalt Primer Used in Roofing, Damp proofing, and Waterproofing
22-110) ASTM D43 – 00(2006) ; Standard Specification for Coal Tar Primer Used in Roofing, Damp proofing, and Waterproofing
22-111) ASTM D449 – 03(2008) ; Standard Specification for Asphalt Used in Damp proofing and Waterproofing
22-112) ASTM D450 – 07 ; Standard Specification for Coal-Tar Pitch Used in Roofing, Damp proofing, and Waterproofing
22-113) ASTM D4802 – 02 ; Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
22-114) ASTM D543 – 06 ; Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
22-115) ASTM D635 – 06 ; Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
22-116) ASTM D638 – 08 ; Standard Test Method for Tensile Properties of Plastics
22-117) ASTM D6380 – 03(2009) ; Standard Specification for Asphalt Roll Roofing (Organic Felt)
22-118) ASTM D6690 – 07 ; Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
22-119) ASTM D695 – 08 ; Standard Test Method for Compressive Properties of Rigid Plastics
22-120) ASTM D882 – 09 ; Standard Test Method for Tensile Properties of Thin Plastic Sheeting
22-121) ASTM E119 – 09C ; 건물 건축 재료의 화재 시험에 대한 표준 시험 방법
22-122) ASTM E84 – 10 ; Standard Test Method for Surface Burning Characteristics of Building Materials
22-123) ASTM F1183 – 96(2006) ; Standard Specification for Aluminum Alloy Chain Link Fence Fabric
22-124) BDS 1301 : 1990 ; Specification for Glazed Earthenware Wall Tiles;
22-125) BDS 1301:1990 ; Specification for Glazed Earthenware Wall Tiles;
22-126) BDS 1493:1994 ; Glossary of terms used in refractory
22-127) BDS 1494:1994 ; Dimension of refractory bricks
22-128) BDS 1495:1994 ; High aluminium refractory bricks
22-129) BDS 809:1973 ; Specification for Wood Poles for Overhead Power and Telecommunication Lines;
22-130) BDS 885:1979 ; Method for Measuring Viscosity Number and K-Value of PVC Resins;
22-131) BDS 886:1978 ; Method for Direct Measuring the Specific Gravity of Plastics;
22-132) BDS 887:1978 ; Method for Measuring Deformation under Heat of Flexible Rigid PVC Compounds;
22-133) BDS 888:1978 ; Method for Measuring Temperature of Deflection under Load;
22-134) BDS 889:1978 ; Method for Measuring the Vicat Softening Temperature (VST) of Thermoplastics;
22-135) BDS 890:1978 ; Method for Measuring the Water Absorption at Room Temperature and Bolling Water Absorption of Plastics;
22-136) BDS 891:1978 ; Method for Measuring the Flexural Modulus of Plastics;
22-137) BDS 892:1978 ; Method for Measuring the Resistance to Tear Propagation of Flexible Plastics, Film or Sheeting;
22-138) BS 6431 ; Floor and Wall Tiles;
22-139) BS 6431 Part 1 1983 ; Specification for Classification and Making, Including Definitions and Characteristics;
22-140) BS 6431 Part 1 to Part 23 ; Ceramic Floor and Wall Tiles.
22-141) BS 6431 Part 10 1984 ; Method for Determination of Dimensions and Surface Quality;
22-142) BS 6431 Part 11 1983 ; Method for Determination of Water Absorption;
22-143) BS 6431 Part 12 1983 ; Method for Determination of Modulus of;
22-144) BS 6431 Part 13 1986 ; Method for Determination of Scratch Hardness of Surface According to Mhos;
22-145) BS 6431 Part 14 1983 ; Method for Determination of Resistance to Abrasion of Unglazed Tiles;
22-146) BS 6431 Part 15 1983 ; Method for Determination of Linear Thermal Expansion;
22-147) BS 6431 Part 16 1983 ; Method for Determination of Resistance to Thermal Shock;
22-148) BS 6431 Part 17 1983 ; Method for Determination of Crazing Resistance-Glazed Tiles;
22-149) BS 6431 Part 18 1983 ; Method for Determination of Chemical Resistance-Unglazed Tiles;
22-150) BS 6431 Part 19 1984 ; Method for Determination of Chemical Resistance-Unglazed Tiles;
22-151) BS 6431 Part 2 1984 ; Specification for Struded Ceramic Tiles with Low Water Absorption (그것< 3%) Group A1;
22-152) BS 6431 Part 20 1984 ; Method for Determination of Resistance to Surface Abrasion-Glazed Tiles;
22-153) BS 6431 Part 23 1986 ; Specification for Sampling and Basis for Acceptance;
22-154) BS 6431 Part 3 ; Extruded Ceramic Tiles with a Water Absorption of 3% < 6%. Group A 11a;
22-155) BS 6431 Part 3 섹션 3.1 1986 ; Specification for General Products;
22-156) BS 6431 Part 3 섹션 3.2 1986 ; Specification for Products Terre Cuite, Cotto, Baldosion Catalan;
22-157) BS 6431 Part 4 ; Extruded Ceramic Tiles with a Water Absorption of 6% <그것< 10%. Group A11b;
22-158) BS 6431 Part 4 ; 섹션 4.2 1986
22-159) BS 6431 Part 4 ; Specification for General Products;
22-160) BS 6431 Part 5 1986 ; Specification for Extruded Ceramic Tiles with a Water Absorption of E>10%, Group A111;
22-161) BS 6431 Part 6 1984 ; Specification for Dust-prestressed Ceramic Tiles with a Low-Water Absorption (그것<3%)Group B1;
22-162) BS 6431 Part 7 1986 ; Specification for Dust-prestressed Ceramic Tiles with a Water Absorption of 3% <E £ 6%. Group B11a;
22-163) BS 6431 Part 8 1986 ; Specification for Dust-prestressed Ceramic Tiles with Water Absorption of 6% < E £ 10%. Group B11b;
22-164) BS 6431 Part 9 1984 ; Specification for Dust-Prestressed Ceramic Tiles with a Water Absorption of E >10%. Group B111;
22-165) IS 10102:1982 ; Technical supply conditions for Rivets.
22-166) IS 110:1968 ; Specification for Ready Mixed Paint, Brushing, Grey Filler, for Enamels, for Use Over Primers (First Revision);
22-167) IS 1900:1974 ; Method of Testing Wood Poles;
22-168) IS 1902:1961 ; Code of Practice for Preservation of Bamboo and Cane for Non-structural Purposes;
22-169) IS 1929:1982 ; Specification for Hot Forged Steel Rivets for Hot Closing (12 에 36 mm diameter) (First Revision);
22-170) IS 2155:1982 ; Specification for Cold-Forged Solid Steel Rivets for Hot Closing (6 에 16 mm diameter) (First Revision);
22-171) IS 2365:1977 ; Specification for Steel Wire Suspension Ropes for Lifts, Elevators and Hoists (First Revision).
22-172) IS 2643:1975 ; Dimensions for Pipe Threads for Fastening Purposes;
22-173) IS 2907:1964 ; Specification for Non-ferrous Rivets (1.6 mm to 10 mm)
22-174) IS 2998:1981 ; Specification for Cold Forged Steel Rivets for Cold Closing (1 에 16 mm diameter) (First Revision);
22-175) IS 3337:1978 ; Specification for Ballies for General Purposes (First Revision);
22-176) IS 345:1952 ; Specification for Wood Filler, Transparent, Liquid;
22-177) IS 3709:1966 ; Specification for Mastic Cement for Bedding of Metal Windows;
22-178) IS 419:1967 ; Specification for Putty for Use on Window Frames (First Revision);
22-179) IS 421:1953 ; Specification for Jointing Paste, for Bedding Moldings on Coaching Stock;
22-180) IS 423:1961 ; Specification for Plastic Wood, for Joiners’ Filler (revised);
22-181) IS 424:1965 ; Specification for Plastic Asphalt (revised);
22-182) IS 554:1975 ; Dimensions for Pipe Threads where Pressure Tight Joints are Required on the Threads (Second Revision);
22-183) IS 6711:1972 ; Code of Practice for Maintenance of Wood Poles for Overhead Power and Telecommunications Lines.
22-184) IS 6874:1973 ; Method of Tests for Round Bamboos;
22-185) IS 7164:1973 ; Specification for Stopper.
22-186) IS 8242:1976 ; Methods of Tests for Split Bamboo;
22-187) IS 8295:1976 ; Specification for Bamboo Chicks, Part I Fine;
22-188) IS 9096:1979 ; Code of Practice for Preservation of Bamboos for Structural Purposes.
22-189) ISO 10080:1990 ; Refractory Products-Classification of Dense, Shaped Acid-Resisting Products;
22-190) ISO 10081:1991 ; Basic Refractory Products-Classification-Part I: Products Containing Less Than 7% Residual Carbon.
22-191) ISO 10563:1991 ; Building Construction-Sealants for Joints-Determination of Change in Mass and Volume;
22-192) ISO 10590:1991 ; Building Construction-Sealants-Determination of Adhesion/Cohesion Properties at Maintained Extension after Immersion in Water;
22-193) ISO 10591 : 1991 ; Building Construction-Sealants-Determination of Adhesion/Cohesion Properties after Immersion in Water.
22-194) ISO 1109:1975 ; Refractory Products-Classification of Dense Shaped Refractory Products;
22-195) ISO 1146:1988 ; Pyrometric Reference Cones for Laboratory Use-Specification;
22-196) ISO 1893:1989 ; Refractory Products-Determination of Refractoriness-Under-Load (differential with rising temperature);
22-197) ISO 1927:1984 ; Prepared Unshaped Refractory Materials (Dense and Insulating) 분류;
22-198) ISO 2245:1990 ; Shaped Insulating Refractory Products-Classification;
22-199) ISO 2444 : 1988 ; Joints in Buildings-Vocabulary;
22-200) ISO 2477:1987 ; Shaped Insulating Refractory Products-Determination of Permanent Change in Dimensions on Heating;
22-201) ISO 2478:1987 ; Dense Shaped Refractory Products-Determination of Permanent Change in Dimensions on Heating;
22-202) ISO 3187:1989 ; Refractory Products-Determination of Creep in Compression;
22-203) ISO 3867:1982 ; Agglomerated Cork-Material of Expansion Joints for Construction and Building Test-Methods;
22-204) ISO 3869:1981 ; Agglomerated Cork-Filler Material of Expansion Joints for Construction and Buildings -Characteristics, Sampling and Packing;
22-205) ISO 3934:1978 ; Rubber Building Gaskets-Materials in Preformed Solid Vulcanizates Used for Sealing Glazing and Panels-Specification;
22-206) ISO 3934:1978 ; Rubber Building Gaskets-Materials in Preformed Solid Vulcanizates Used for Sealing Glazing and Panels-Specification;
22-207) ISO 4633:1983 ; Rubber Seals-Joint Rings for Water Supply, Drainage and Sewerage Pipelines-Specification for Materials;
22-208) ISO 4633:1983 ; Rubber Seals-Joint Rings for Water Supply, Drainage and Sewerage Pipelines-Specifications for Materials;
22-209) ISO 4635:1982 ; Rubber, Vulcanized-Preformed Compression Seals for Use
22-210) ISO 4635:1982 ; Rubber, Vulcanized-Preformed Compression Seals for Use Between Concrete Motorway Paving Sections-Specification for Material;
22-211) ISO 5013:1985 ; Refractory Products-Determination of Modulus of Rupture at Elevated Temperatures;
22-212) ISO 5014:1986 ; Refractory Products-Determination of Modulus of Rupture at Ambient Temperature;
22-213) ISO 5015-6:1984 ; Refractory Bricks-Dimensions-Part 6: Basic Bricks for Oxygen Steel Making Converters;
22-214) ISO 5016:1986 ; Shaped Insulating Refractory Products-Determination of Bulk Density and True Porosity;
22-215) ISO 5017:1988 ; Dense Shaped Refractory Products-Determination of Bulk Density,
22-216) ISO 5018:1983 ; Refractory Materials-Determination of True Density;
22-217) ISO 5019-1:1984 ; Refractory Bricks-Dimensions-Part I: Rectangular Bricks;
22-218) ISO 5019-2:1984 ; Refractory Bricks-Dimensions-Part 2: Arch Bricks;
22-219) ISO 5019-3:1984 ; Refractory Bricks-Dimensions-Part 3: Rectangular Checker Bricks for Regenerative Furnace;
22-220) ISO 5022:1979 ; Shaped Refractory Products-Sampling and Acceptance Testing;
22-221) ISO 528:1983 ; Refractory Products-Determination of Pyrometric Cone Equivalent (refractoriness);
22-222) ISO 5417-1986 ; Refractory Bricks for Use in Rotary Kilns-Dimensions;
22-223) ISO 5419-4:1988 ; Refractory Bricks-Dimensions-Part 4: Dome Bricks for Electric arc Furnace Roofs;
22-224) ISO 5892:1981 ; Rubber Building Gaskets-Materials for Preformed Solid Vulcanized Structural Gaskets-Specification;
22-225) ISO 5892:1981 ; Rubber Building Gaskets-Materials for Preformed Solid Vulcanized Structural Gaskets-Specification;
22-226) ISO 6447:1983 ; Rubber Seals-Joint Rings Used for Gas Supply Pipes and Fittings-Specification for Material;
22-227) ISO 6447:1991 ; Rubber Seals-Joint Rings Used for Gas Supply Pipes and Fittings- Specification for Material;
22-228) ISO 6589:1983 ; Joints in Building-Laboratory Method of Test for Air Permeability of Joints;
22-229) ISO 7389:1987 ; Building Construction-Jointing Products-Determination of Elastic Recovery;
22-230) ISO 7390:1987 ; Building Construction-Jointing Products-Determination of Resistance to Flow;
22-231) ISO 7727:1984 ; Joints in Building-Principles for Jointing of Building Components-Accommodation of Dimensional Deviations During Construction;
22-232) ISO 8339:1984 ; Building Construction-Jointing Products-Sealants-Determination of Tensile Properties;
22-233) ISO 8340:1984 ; Building Construction-Jointing Products-Sealants-Determination of Tensile Properties at Maintained Extension;
22-234) ISO 8394:1988 ; Building Construction-Jointing Products-Determination of Extrudability of One-Component Sealants;
22-235) ISO 8656:1988 ; Refractory Products-Sampling of Raw Materials and Unshaped Products;
22-236) ISO 8840:1987 ; Refractory Materials-Determination of Bulk Density of Granular Materials (Grain Density);
22-237) ISO 8890:1988 ; Dense Shaped Refractory Products-Determination of Resistance to Sulfuric Acid;
22-238) ISO 8894-1:1987 ; Refractory Materials-Determination of Thermal Conductivity-
22-239) ISO 8894-2:1990 ; Refractory Materials-Determination of Thermal Conductivity-
22-240) ISO 8895:1986 ; Shaped Insulating Refractory Products-Determination of Cold Crushing Strength;
22-241) ISO 9046:1987 ; Building Construction-Sealants-Determination of Adhesion/ Cohesion Properties at Constant Temperature;
22-242) ISO 9047:1989 ; Building Construction-Sealants-Determination of Adhesion/ Cohesion Properties at Variable Temperatures;
22-243) ISO 9205:1988 ; Refractory Bricks for Use in Rotary Kilns-Hot-face Identification Marking;
22-244) ISO 9331:1991 ; Rubber Seals Joint Rings for Hot Water Supply Pipelines up to 110oC Specifications for the Material.
22-245) ISO 9631:1991 ; Rubber Seals-Joint Rings for Hot Water Supply Pipelines up to 110oC Specifications for the Material;1-1) ANSI A108.1-2009 ; Specifications for the Installation of Ceramic Tile with Portland Cement Mortar;
Comments are closed.