5. PRE-STRESSED CONCRETE

건설자재 시험 및 인증 관련 규격목록 5

5. PRE-STRESSED CONCRETE

5-1)          BDS ISO 10065: 2006 ; Steel bars reinforcement of concrete– Bend and Rebend tests

5-2)          BDS ISO 10144:2006 ; Certification scheme for steel bars and wires for the reinforcement of concrete structures.

5-3)          BDS ISO 15630-1 : 2008 ; Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, wire rod and wire

5-4)          BDS ISO 15630-2 : 2008 ; Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric

5-5)          BDS ISO 15630-3 : 2008 ; Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel

5-6)          BDS ISO 15835-1:2010 ; Steel for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars —Part 1: Requirements

5-7)          BDS ISO 15835-2:2010 ; Steel for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars —Part 2: Test methods

5-8)          BDS ISO 16020 : 2008 ; Steel for the reinforcement and prestressing of concrete — Vocabulary

5-9)          BDS ISO 6934 – 1 : 2008 ; Steel for the prestressing of concrete – Part 1: General requirements

5-10)        BDS ISO 6934 – 2 : 2008 ; Steel for the prestressing of concrete – Part 2 Cold-drawn wire

5-11)        BDS ISO 6934 – 3 : 2008 ; Steel for the prestressing of concrete – Part 3 Quenched and tempered wire

5-12)        BDS ISO 6934 – 4 : 2008 ; Steel for the prestressing of concrete – Part 4 Strand

5-13)        BDS ISO 6934- 5: 2008 ; Steel for the prestressing of concrete – Part 5 Hot-rolled steel bars with or without subsequent processing

5-14)        BDS ISO 6935 (Part-1): 2010 (1st revision) ; Steel for the re-enforcement of concrete – Part-1: Plain bars

5-15)        BDS ISO 6935 (Part-2): 2010 (1st revision) ; Steel for the reinforcement of concrete – Part-2: Ribbed bars

5-16)        BDS ISO 6935 (Part-3): 2006 ; Steel for the reinforcement of concrete – Part-3: Welded Fabric. Specifies technical requirements for factory made sheets or rolls welded fabric manufacture from steel wires or bars with diameters from 4 mm to 16 mm and designed for reinforcement in ordinary concrete structured and for non-prestressed reinforcement in prestressed concrete structures.

4. Asbestos Cement Products

건설자재 시험 및 인증 관련 규격목록 4

4. Asbestos Cement Products

4-1)          ASTM C222 – 97(2008) ; Standard Specification for Asbestos-Cement Roofing Shingles

4-2)          ASTM C223 – 98(2008) ; Standard Specification for Asbestos-Cement Siding

4-3)          ASTM C500 – 07 ; Standard Test Methods for Asbestos-Cement Pipe

4-4)          ASTM C508 / C508M – 00(2009)e1 ; Standard Specification for Asbestos-Cement Underdrain Pipe

4-5)          ASTM C663 – 98(2008) ; Standard Specification for Asbestos-Cement Storm Drain Pipe

4-6)          ASTM C875 – 98(2008) ; Standard Specification for Asbestos-Cement Conduit

4-7)          ASTM C966 – 98(2008) ; Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

4-8)          BDS 1046:1983 ; Specification for Asbestos Cement Products-Corrugated Sheets and Fittings for Roofing and Cladding;

4-9)          BDS 428:1964 ; Specification for Asbestos Cement Pressure Pipes (under revision);

4-10)        BDS 429:1964 ; Specification for Asbestos Cement Building and Sanitary Pipes (under revision);

4-11)        BDS 430:1964 ; Specification for Asbestos Cement Corrugated Sheets for Roofing and Cladding (under revision);

4-12)        BDS 431:1964 ; Specification for Asymmetrical Section Corrugated Sheets in Asbestos Cement for Roofing and Cladding (under revision);

4-13)        BDS 579:1966 ; Specification for Asbestos Cement Flat Sheets (under revision);

3. Concrete Pipe and Precast Sections

건설자재 시험 및 인증 관련 규격목록 3

3. Concrete Pipe and Precast Sections

3-1)          ASTM C1433M – 10 ; Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

3-2)          ASTM C14M – 07 ; Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

3-3)          ASTM C361M – 08 ; Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

3-4)          ASTM C444M – 03(2009) ; Standard Specification for Perforated Concrete Pipe (Metric)

3-5)          ASTM C478M – 09 ; Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

3-6)          ASTM C507M – 10a ; Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

3-7)          ASTM C654M – 05a ; Standard Specification for Porous Concrete Pipe (Metric)

3-8)          ASTM C655M – 09 ; Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

3-9)          ASTM C76M – 10a ; Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

3-10)        ASTM C858 – 10 ; Standard Specification for Underground Precast Concrete Utility Structures

3-11)        ASTM C891 – 09 ; Standard Practice for Installation of Underground Precast Concrete Utility Structures

3-12)        ASTM C913 – 08 ; Standard Specification for Precast Concrete Water and Wastewater Structures

3-13)        ASTM C924M – 02(2009) ; Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)

3-14)        BDS 1626:1999 ; Concrete pipes (with and without) reinforcement

3-15)        IS 1916:1989 ; Specification for steel cylinder pipewith concrete lining and coating(first revision)

3-16)        IS 3597:1998 ; Methods of test for concrete pipes (second revision)

3-17)        IS 4350:1967 ; Specification for concrete porous pipes for under drainage

3-18)        IS 458:2003 ; Specification for precast concrete pipes (with and without reinforcement) (fourth revision)

3-19)        IS 7319:1974 ; Specification for perforated concrete pipes

3-20)        IS 7322:1985 ; Specification for specials for steel cylinder reinforced concrete pipes (first revision)

3-21)        IS 784:2001 ; Specification for prestressed concrete pipes (including specials) (second revision)

2. CEMENT AND CONCRETE

건설자재 시험 및 인증 관련 규격목록 2

2. CEMENT AND CONCRETE

2-1)          ASTM C172 – 08 ; Standard Practice for Sampling Freshly Mixed Concrete

2-2)          ASTM C192 / C192M – 07 ; Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

2-3)          ASTM C31 / C31M – 09 ; Standard Practice for Making and Curing Concrete Test Specimens in the Field

2-4)          ASTM C317 / C317M – 00(2005) ; Standard Specification for Gypsum Concrete

2-5)          ASTM C39 / C39M – 09a ; Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

2-6)          ASTM C42 / C42M – 04 ; Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

2-7)          ASTM C496 / C496M – 04e1 ; Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

2-8)          ASTM C617 – 09a ; Standard Practice for Capping Cylindrical Concrete Specimens

2-9)          ASTM C685 / C685M – 10 ; Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

2-10)        ASTM C78 – 09 ; Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

2-11)        ASTM C94 / C94M – 09a ; Standard Specification for Ready-Mixed Concrete

2-12)        ASTM C989 – 09a ; Standard Specification for Slag Cement for Use in Concrete and Mortars

2-13)        BDS 240:1963 ; Specification for Plain Cold Drawn Steel Wire for Prestressed Concrete;

2-14)        BDS 243:1963 ; Specification for Coarse and Fine Aggregates from Natural Sources for Concrete;

2-15)        BDS 279:1963 ; Specification for Abrasion of Coarse Aggregates by Use of Los Angeles Machine (under revision);

2-16)        BDS 281:1963 ; Specification for Organic Impurities in Sands for Concrete (under revision);

2-17)        BDS 921:1980 ; Specification for Standard Sand for Testing of Cement;

2-18)        BDS EN 934-1:2008 ; Admixtures for concrete, mortar and grout — Part 1: Common requirements

2-19)        BDS EN 934-2:2008 ; Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and

2-20)        BDS ISO 1920-10: 2011 ; Testing of Concrete — Part 10: Determination of static modulus of elasticity in compression

2-21)        BDS ISO 1920-8: 2010 ; Testing of Concrete — Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory

2-22)        BDS ISO 1920-9: 2010 ; Testing of Concrete — Part 9: Determination of creep of concrete cylinders in compression

2-23)        BDS ISO 22965-1: 2008 ; Concrete — Part 1: Methods of specifying and guidance for the specifier

2-24)        BDS ISO 22965-2: 2008 ; Concrete — Part 2: Specification of constituent materials, production of concrete and compliance of concrete

1. Standard for Masonry

건설자재 시험 및 인증 관련 규격목록 1

1. Standards for Masonry

1-1)         ANSI A108.1-2009 ; Specifications for the Installation of Ceramic Tile with Portland Cement Mortar;

1-2)          ANSI A108.1A—2009 ; Installation of Ceramic Tile in the Wet-set Method, with Portland Cement Mortar

1-3)          ANSI A108.1B—2009 ; Installation of Ceramic Tile, quarry Tile on a Cured Portland Cement Mortar Setting Bed with Dry-set or Latex-portland Mortar

1-4)          ASTM A1008 / A1008M – 10 ; Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

1-5)          ASTM A183 – 03(2009) ; Standard Specification for Carbon Steel Track Bolts and Nuts

1-6)          ASTM A615 / A615M – 09b ; Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

1-7)          ASTM A706 / A706M – 09b ; Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

1-8)          ASTM A775 / A775M – 07b ; Standard Specification for Epoxy-Coated Steel Reinforcing Bars

1-9)          ASTM A82 / A82M – 07 ; Specification for Steel Wire, Plain, for Concrete Reinforcement

1-10)        ASTM A996 / A996M – 09b ; Standard Specification for Rail-Steel and Axle-Steel Deformed

1-11)        ASTM A996 / A996M – 09b ; Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

1-12)        ASTM C126 – 09 ; Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

1-13)        ASTM C129 – 06 ; Standard Specification for Non-load bearing Concrete Masonry Units

1-14)        ASTM C144 – 04 ; Standard Specification for Aggregate for Masonry Mortar

1-15)        ASTM C150 / C150M – 09 ; Standard Specification for Portland Cement

1-16)        ASTM C207 – 06 ; Standard Specification for Hydrated Lime for Masonry Purposes

1-17)        ASTM C212 – 00(2006) ; Standard Specification for Structural Clay Facing Tile

1-18)        ASTM C270 – 08a ; Standard Specification for Mortar for Unit Masonry

1-19)        ASTM C331 – 05 ; Standard Specification for Lightweight Aggregates for Concrete Masonry Units

1-20)        ASTM C34 – 09 ; Standard Specification for Structural Clay Load-Bearing Wall Tile

1-21)        ASTM C404 – 07 ; Standard Specification for Aggregates for Masonry Grout

1-22)        ASTM C476 – 09 ; Standard Specification for Grout for Masonry

1-23)        ASTM C5-03 ; Standard Specification for Quicklime for Structural Purposes

1-24)        ASTM C55 – 09 ; Standard Specification for Concrete Building Brick

1-25)        ASTM C56 – 09 ; Standard Specification for Structural Clay Non load bearing Tile

1-26)        ASTM C595 / C595M – 10 ; Standard Specification for Blended Hydraulic Cements

1-27)        ASTM C73 – 05 ; Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

1-28)        ASTM C744 – 09 ; Standard Specification for Prefaced Concrete and Calcium

1-29)        ASTM C90 – 09 ; Standard Specification for Load bearing Concrete Masonry Units

1-30)        ASTM C90 – 09 ; Standard Specification for Load bearing Concrete Masonry Units

1-31)        ASTM C91 – 05 ; Standard Specification for Masonry Cement

1-32)        BDS 1249 : 1989 ; Acid resistant bricks. It specifies the requirements for acid-resistant bricks, dimensions, tolerances, test etc.

1-33)        BDS 1250 : 1990 ; Burnt clay facing bricks. It specifies the dimensions, quality & strength of burnt clay facing bricks used in building & other structure, physical requirements etc.

1-34)        BDS 1263 : 1990 ; Burnt Clay hollow bricks for walls & partitions it covers the dimensions, quality & strength for hollow bricks made from burnt clay & having perforations through & at right angle to the bearing surface tests.

1-35)        BDS 1264 : 1990 ; Glossary of terms relating to structural clay products. It covers the definition of common terms applicable to structural clay products, used in building & civil engineering works.

1-36)        BDS 1432 : 1993 ; Burnt clay perforated building bricks. Specifies the requirements in regard to dimensions, perforations, quality, strength and also for quality of surface in case of special grade for facing bricks of perforated burnt clay building bricks for use in walls and partitions.

1-37)        BDS 1433 : 1993 ; Dimensions quantities in general construction work. Specifies the various dimensional values in S. I units used in general construction work.

1-38)        BDS 1803 : 2008 ; Specification for Hollow Clay Bricks and Blocks

1-39)        BDS 208 : 2009 ; Specification for Common Building clay bricks (Third revision)Specifies the dimensions, quality & strength of common burnt clay bricks, methods of sampling, testing etc.

1-40)        BDS 238 ; Fireclay refractory bricks and shapes for general purposes. This Standard specifies the requirements for fireclay refractory bricks

1-41)        BDS EN 1052-3: 2009 ; Methods of test for masonry — Part 3: Determination of initial shear strength

1-42)        BDS EN 13369: 2009 ; Common rules for precast concrete products

1-43)        BDS EN 1338: 2009 ; Concrete paving blocks — Requirements and test methods

1-44)        BDS EN 1339:2009 ; Concrete paving flags — Requirements and test methods

1-45)        BDS EN 1340:2009 ; Concrete kerb units — Requirements and test methods

1-46)        BDS EN 1745: 2009 ; Masonry and masonry products — Methods for determining design thermal values

1-47)        BDS EN 197-1:2003 (Reaffirmed 2010) ; Cement Part-1 Composition, specifications and conformity criteria for common cements.

1-48)        BDS EN 771-3: 2009 ; Specification for masonry units—Part: 3 Aggregate concrete masonry units (dense and lightweight aggregates)

1-49)        BDS EN 772-1: 2009 ; Methods of test for masonry units — Part 1: Determination of compressive strength

1-50)        BDS EN 772-11: 2009 ; Methods of test for masonry units — Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units

1-51)        BDS EN 772-13: 2009 ; Methods of test for masonry units — Part 13: Determination of net and gross dry density of masonry units (except for natural stone)

1-52)        BDS EN 772-14: 2009 ; Methods of test for masonry units — Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units

1-53)        BDS EN 772-16: 2009 ; Methods of test for masonry units — Part 16: Determination of dimensions

1-54)        BDS EN 772-2: 2009 ; Methods of test for masonry units — Part 2: Determination of percentage area of voids in masonry units (by paper indentation)

1-55)        BDS EN 772-20: 2009 ; Methods of test for masonry units — Part 20: Determination of flatness of faces of masonry units

1-56)        BDS EN 772-6: 2009 ; Methods of test for masonry units — Part 6: Determination of bending tensile strength of aggregate concrete masonry units

GOST Fire Certificate Mandatory Equip’t List

화재인증 관련 최신법 규정

[영어]

• RF Government Resolution dated March 17, 2010 N 140 “On Amendments to the Resolution of the Government of the Russian Federation on March 17, 2009 N 241″
• Changes made to the list of products that for placement under the customs regime, provide for the disposition or use of these products in accordance with its purpose in the customs territory of the Russian Federation shall be subject to mandatory conformity requirements of the Federal Law “Technical regulations on fire safety requirements”

RF Government Resolution dated March 17, 2010 N 140
“On Amendments to the Resolution of the Government of the Russian Federation on March 17, 2009 N 241″

The Government of the Russian Federation decrees:

Approve the attached changes that are made ​​to the list of products that for placement under the customs regime, provide for the disposition or use of these products in accordance with its purpose in the customs territory of the Russian Federation shall be subject to mandatory conformity requirements of the Federal Law “Technical regulations on fire safety requirements” approved by the Resolution of the Government of the Russian Federation on March 17, 2009 N 241 (Collected Legislation of the Russian Federation, 2009, N 12, art. 1442).

Moscow

March 17, 2010

140 N

[러시아어]

Постановление Правительства РФ от 17 марта 2009 г. N 241
“Об утверждении списка продукции, которая для помещения под таможенные режимы, предусматривающие возможность отчуждения или использования этой продукции в соответствии с ее назначением на таможенной территории Российской Федерации, подлежит обязательному подтверждению соответствия требованиям Федерального закона “Технический регламент о требованиях пожарной безопасности”

В соответствии со статьей 29 Федерального закона “О техническом регулировании” и в целях реализацииФедерального закона ”Технический регламент о требованиях пожарной безопасности” Правительство Российской Федерации постановляет:

Москва

17 марта 2009 г.

N 241

CPD Construction CE Mark

건설자재 CE Mark 인증 및 EN 규격 시험

관련 자료 다운 받기 : Agglomerated Stone CE Marking

EN 14688 CE Marking

화장실용 개수대 Wash Basins 의 CE Marking  인증취득

화장실 바신 Wash Basins EN 14688 의 CE Mark

EN 13310 CE Marking

가정용 Kitchen Sinks의 CE Marking 인증취득 안내

가정용 Kitchen sinks EN 13310 의 CE Mark

EN 15285 CE Marking

EN 15285 CE Marking Agglomerated Stone
바닥재 CE Marking Agglomerated stone EN 15285 CE Mark 인증취득