Express lead times-Fire, Smoke and Toxicity test.

신속하게 시험을 완료할 필요가 있는 경우 아래와 같은 급행시험을 수행하는 제도를 이용하여 시험성적서를 신속하게 받아 볼수있습니다.

모든 시험이 이와 같은 급행시험수행 제도가 적용되는 것은 아니며 2일 이내 시험이 가능한 화재관련 연기독성 시험 등 특별히 정해져 있는 대상의 시험일 경우 해당됩니다.

AP Network Scope CE Marking CPD

아래 건설자재에 대하여 CE Marking 자문상담합니다.

TEMPEST BSI TL 03305

IN 1991 Eurocode 1 : Actions on structures

Eurocode에 따른 세부 EN 규격 내용

IN 1991 Eurocode 1 : Actions on structures

IN 1991-1-1 Densities, self-weight and imposed loads for buildings

1. general
2. 요구 사항
3. limit state
4. actions on structures and environmental influences
5. material properties
6. geometrical properties
7. modelling for structural analysis and resistance
8. design by testing and quality control
9. verification by the partial factor method

IN 1991-1-2 General actions – Actions on structures exposed to fire

IN 1991-1-3 General actions – Snow loads

IN 1991-1-4 General actions – Wind actions

IN 1991-1-5 General actions – Thermal actions

1. General
2. Classification of actions
3. Design situation
4. Representation of actions
5. Temperature changes in buildings
6. Temperature changes in bridges
7. Temperature changes in industrial chimneys and pipelines

IN 1991-1-6 General actions – Actions during execution

IN 1991-1-7 Accidental actions due to impact and explosions

IN 1991-2 Traffic loads on bridges

IN 1991-3 Actions induced by cranes and machinery

IN 1991-4 Actions on silos and tanks

EUROCODE Introduction

1. EUROCODE 소개

유로코드의 분류는 다음과 같습니다.

0 – Basis

Eurocode 0: Basis of structural design

1 – Actions

Eurocode 1: Actions on structures – Part 1-1: General actions – Densities, self-weight and imposed loads

Eurocode 1: Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire

Eurocode 1: Actions on structures – Part 1-3: General actions – Snow loads

Eurocode 1: Actions on structures – Part 1-4: General actions – Wind actions

Eurocode 1: Actions on structures – Part 1-5: General actions – Thermal actions

Eurocode 1: Actions on structures – Part 1-6: General actions – Actions during execution

Eurocode 1: Actions on structures – Part 1-7: General actions – Accidental actions

Eurocode 1: Actions on structures – Part 2: Traffic loads on bridges

Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery

Eurocode 1: Actions on structures – Part 4: Silos and tanks

2 – Concrete

Eurocode 2: Design of concrete structures – Part 1-1: General – Common rules for building and civil engineering structures

Eurocode 2: Design of concrete structures – Part 1-2: General – Structural fire design

Eurocode 2: Design of concrete structures – Part 2: Bridges

Eurocode 2: Design of concrete structures – Part 3: Liquid retaining and containment structures

Eurocode 2 packages

2/1 Design of concrete building and civil engineering structures (excluding bridges and liquid retaining and containment structures)

2/2 Design of concrete bridges

2/3 Design of concrete liquid-retaining and containment structures

3 – 강철

Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings

Eurocode 3: Design of steel structures – Part 1-2: General – Structural fire design

Eurocode 3: Design of steel structures – Part 1-3: General – Cold formed thin gauge members and sheeting

Eurocode 3: Design of steel structures – Part 1-4: General – Structures in stainless steel

Eurocode 3: Design of steel structures – Part 1-5: General – Strength and stability of planar plated structures without transverse loading

Eurocode 3: Design of steel structures – Part 1-6: General – Strength and stability of shell structures

Eurocode 3: Design of steel structures – Part 1-7: General – Design values for plated structures subjected to out of plane loading

Eurocode 3: Design of steel structures – Part 1-8: General – Design of joints

Eurocode 3: Design of steel structures – Part 1-9: General – Fatigue strength

Eurocode 3: Design of steel structures – Part 1-10: General – Material toughness and through thickness assessment

Eurocode 3: Design of steel structures – Part 1-11: General – Design of structures with tension components

Eurocode 3: Design of steel structures – Part 1-12: General – Supplementary rules for high strength steels

Eurocode 3: Design of steel structures – Part 2-1: Bridges

Eurocode 3: Design of steel structures – Part 3-1 Towers, masts and chimneys – Towers and masts

Eurocode 3: Design of steel structures – Part 3-2: Towers, masts and chimneys – Chimneys

Eurocode 3: Design of steel structures – Part 4-1: Silos, tanks and pipelines – Silos

Eurocode 3: Design of steel structures – Part 4-2: Silos, tanks and pipelines – Tanks

Eurocode 3: Design of steel structures – Part 4-3: Silos, tanks and pipelines – Pipelines

Eurocode 3: Design of steel structures – Part 5: Piling

Eurocode 3: Design of steel structures – Part 6: Crane supporting structures

Eurocode 3 packages

3/1 Design of steel building and civil engineering structures (excluding bridges, silos, tanks and pipelines, steel piling, crane supporting structures, and towers and masts)

3/2 Design of steel bridges

3/3 Design of steel silos, tanks and pipelines

3/4 Design of steel piling

3/5 Design of steel crane-supporting structures

3/6 Design of steel towers and masts

4 – Composite

Eurocode 4: Design of composite steel and concrete structures – Part 1-1: General – Common rules and rules for buildings

Eurocode 4: Design of composite steel and concrete structures – Part 1-2: General – Structural fire design

Eurocode 4: Design of composite steel and concrete structures – Part 2: Bridges

Eurocode 4 packages

4/1 Design of composite steel and concrete building and civil engineering structures (excluding bridges)

4/2 Design of composite steel and concrete bridges

5 – Timber

Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for buildings

Eurocode 5: Design of timber structures – Part 1-2: General – Structural fire design

Eurocode 5: Design of timber structures – Part 2: Bridges

Eurocode 5 packages

5/1 Design of timber buildings and civil engineering structures (excluding bridges)

5/2 Design of timber bridges

6 – Masonry

Eurocode 6: Design of masonry structures – Part 1-1: General – Rules for reinforced and unreinforced masonry, including lateral loading

Eurocode 6: Design of masonry structures – Part 1-2: General – Structural fire design

Eurocode 6: Design of masonry structures – Part 2: Selection and execution of masonry

Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for masonry structures

Eurocode 6 packages

6 Design of masonry building and civil engineering structures (excluding bridges)

7 – Geo​-​technical

Eurocode 7: Geotechnical design – Part 1: General rules

Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing

8 – Earthquake

Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules seismic actions and rules for buildings

Eurocode 8: Design of structures for earthquake resistance – Part 2: Bridges

Eurocode 8: Design of structures for earthquake resistance – Part 3: Strengthening and repair of buildings

Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and pipelines

Eurocode 8: Design of structures for earthquake resistance – Part 5: Foundations, retaining structures and geotechnical aspects

Eurocode 8: Design of structures for earthquake resistance – Part 6: Towers, masts and chimneys

9 – Aluminium​

Eurocode 9: Design of aluminium structures – Part 1-1: General – Common rules

Eurocode 9: Design of aluminium structures – Part 1-2: General – Structural fire design

Eurocode 9: Design of aluminium structures – Part 1-3: Additional rules for structures susceptible to fatigue

Eurocode 9: Design of aluminium structures – Part 1-4: Supplementary rules for trapezoidal sheeting

Eurocode 9: Design of aluminium structures – Part 1-5: Supplementary rules for shell structures

Eurocode 9 packages

9 Design of all aluminium structures

NIJ – National Institute of Justice Testing

National Institute of Justice(NIJ)는 미국 법무성(United States Department of Justice) 산하조직으로써 수사관련 연구 개발 및 평가국입니다. 이 기관에서는 범죄예방, 마약범죄,과학수사, 교정 등에 관하여 다양한 연구 및 개발이 이루어지고 있고 관련규격 등이 제정되기도 합니다.

아래는 적합성대상 장비류 목록입니다.

• 방탄류
• 방검류
• 자동권총류
• 수갑류

Personal Body Armor Testing

- 방탄, 방검 관련

제도 개요 :

2006년 미국 DOJ ( the U. S. Department of Justice )의 National Institute of Justice (NIJ) Office of Science and Technology 가 발의하여 제정된 인정제도

인정 시험대상 :

- Testing ballistic- and stab-resistant personal body armor

- To support the voluntary minimum performance standards developed

대상 :

NIJ by the National Institute of Standards and Technology (NIST) Office of Law Enforcement Standards (OLES).

STD :

NIJ 0101.06, July 2008, Sec. 5 Ballistic Resistance of Body Armor, 섹션 5, Flexible Armor Conditioning Protocol

NIJ 0101.06, July 2008, Sec. 6 Ballistic Resistance of Body Armor, 섹션 6, Hard Armor Conditioning Protocol

NIJ 0101.06, July 2008, Sec. 6 Ballistic Resistance of Body Armor, 섹션 7, Ballistic Test Methods

NIJ 0101.04, Rev. 2001 Ballistic Resistance of Personal Body Armor

NIJ 0115.00 Stab Resistance of Personal Body Armor