건설자재 CE Mark관련 EN 규격
건설자재 CE Mark관련 EN 규격
EN 1:1998-Flued oil stoves with vaporizing burners
EN 10025-1:2004Hot rolled products of structural steels – Part 1: General technical delivery conditions
EN 10088-4:2009Stainless steels – Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10088-5:2009Stainless steels – Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 1020:2009Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
EN 10210-1:2006Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
EN 10219-1:2006Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
EN 10224:2002Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption – Technical delivery conditions
EN 10255:2004+A1:2007Non-Alloy steel tubes suitable for welding and threading – Technical delivery conditions
EN 10311:2005Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
EN 10312:2002Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption – Technical delivery conditions
EN 10340:2007Steel castings for structural uses
EN 10343:2009Steels for quenching and tempering for construction purposes – Technical delivery conditions
EN 1036-2:2008Glass in building – Mirrors from silver-coated float glass for internal use – Part 2: Evaluation of conformity; product standard
EN 1051-2:2007Glass in building – Glass blocks and glass pavers – Part 2: Evaluation of conformity/Product standard
EN 1057:2006+A1:2010Copper and copper alloys – Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1090-1:2009+A1:2011 (new)Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
EN 1096-4:2004Glass in building – Coated glass – Part 4: Evaluation of conformity/Product standard
EN 1123-1:1999Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems – Part 1: Requirements, testing, quality control
EN 1124-1:1999Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems – Part 1: Requirements, testing, quality control
EN 1125:2008Building hardware – Panic exit devices operated by a horizontal bar, for use on escape routes – Requirements and test methods
EN 1154:1996Building hardware – Controlled door closing devices – Requirements and test methods
EN 1155:1997Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods
EN 1158:1997Building hardware – Door coordinator devices – Requirements and test methods
EN 1168:2005+A3:2011 (new)Precast concrete products – Hollow core slabs
EN 12004:2007Adhesives for tiles – Requirements, evaluation of conformity, classification and designation
EN 12050-1:2001Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 1: Lifting plants for wastewater containing faecal matter
EN 12050-2:2000Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 2: Lifting plants for faecal-free wastewater
EN 12050-3:2000Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 3: Lifting plants for wastewater containing faecal matter for limited applications
EN 12050-4:2000Wastewater lifting plants for buildings and sites – Principles of construction and testing – Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12057:2004Natural stone products – Modular tiles – Requirements
EN 12058:2004Natural stone products – Slabs for floors and stairs – Requirements
EN 12094-1:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 1: Requirements and test methods for electrical automatic control and delay devices
EN 12094-10:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 10: Requirements and test methods for pressure gauges and pressure switches
EN 12094-11:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 11: Requirements and test methods for mechanical weighing devices
EN 12094-12:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 12: Requirements and test methods for pneumatic alarm devices
EN 12094-13:2001Fixed firefighting systems – Components for gas extinguishing systems – Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-2:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 2: Requirements and test methods for non-electrical automatic control and delay devices
EN 12094-3:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 3: Requirements and test methods for manual triggering and stop devices
EN 12094-4:2004Fixed firefighting systems – Components for gas extinguishing systems – Part 4: Requirements and test methods for container valve assemblies and their actuators
EN 12094-5:2006Fixed firefighting systems – Components for gas extinguishing systems – Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
EN 12094-6:2006Fixed firefighting systems – Components for gas extinguishing systems – Part 6: Requirements and test methods for non-electrical disable devices
EN 12094-7:2000Fixed firefighting systems – Components for gas extinguishing systems – Part 7: Requirements and test methods for nozzles for CO2 systems
EN 12094-8:2006Fixed firefighting systems – Components for gas extinguishing systems – Part 8: Requirements and test methods for connectors
EN 12094-9:2003Fixed firefighting systems – Components for gas extinguishing systems – Part 9: Requirements and test methods for special fire detectors
EN 12101-1:2005Smoke and heat control systems – Part 1: Specification for smoke barriers
EN 12101-10:2005Smoke and heat control systems – Part 10: Power supplies
EN 12101-2:2003Smoke and heat control systems – Part 2: Specification for natural smoke and heat exhaust ventilators
EN 12101-3:2002Smoke and heat control systems – Part 3: Specification for powered smoke and heat exhaust ventilators
EN 12101-6:2005Smoke and heat control systems – Part 6: Specification for pressure differential systems – Kits
EN 12101-7:2011Smoke and heat control systems – Part 7: Smoke duct sections
EN 12101-8:2011Smoke and heat control systems – Part 8: Smoke control dampers
EN 12150-2:2004Glass in building – Thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard
EN 12209:2003Building hardware – Locks and latches – Mechanically operated locks, latches and locking plates – Requirements and test methods
EN 12259-1:1999 + A1:2001Fixed firefighting systems – Components for sprinkler and water spray systems – Part 1: Sprinklers
EN 12259-2:1999Fixed firefighting systems – Components for sprinkler and water spray systems – Part 2: Wet alarm valve assemblies
EN 12259-3:2000Fixed firefighting systems – Components for automatic sprinkler and water spray systems – Part 3: Dry alarm valve assemblies
EN 12259-4:2000Fixed firefighting systems – Components for sprinkler and water spray systems – Part 4: Water motor alarms
EN 12259-5:2002Fixed firefighting systems – Components for sprinkler and water spray systems – Part 5: Water flow detectors
EN 12271:2006Surface dressing – Requirements
EN 12273:2008Slurry surfacing – Requirements
EN 12285-2:2005Workshop fabricated steel tanks – Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
EN 12326-1:2004Slate and stone products for discontinuous roofing and cladding – Part 1: Product specification
EN 12337-2:2004Glass in building – Chemically strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard
EN 12352:2006Traffic control equipment – Warning and safety light devices
EN 12368:2006Traffic control equipment – Signal heads
EN 12380:2002Air admittance valves for drainage systems – Requirements, tests methods and evaluation of conformity
EN 12446:2011Chimneys – Components – Concrete outer wall elements
EN 12467:2004Fibre-cement flat sheets – Product specification and test methods
EN 12566-1:2000Small wastewater treatment systems for up to 50 PT – Part 1: Prefabricated septic tanks
EN 12566-3:2005+A1:2009Small wastewater treatment systems for up to 50 PT – Part 3: Packaged and/or site assembled domestic wastewater treatment plants
EN 12566-4:2007Small wastewater treatment systems for up to 50 PT – Part 4: Septic tanks assembled in situ from prefabricated kits
EN 12591:2009Bitumen and bituminous binders – Specifications for paving grade bitumens
EN 12620:2002+A1:2008Aggregates for concrete
EN 12676-1:2000Anti-glare systems for roads – Part 1: Performance and characteristics
EN 12737:2004+A1:2007Precast concrete products – Floor slats for livestock
EN 12764:2004+A1:2008Sanitary appliances – Specification for whirlpool baths
EN 12794:2005+A1:2007Precast concrete products – Foundation piles
EN 1279-5:2005+A2:2010Glass in building – Insulating glass units – Part 5: Evaluation of conformity
EN 12809:2001Residential independent boilers fired by solid fuel – Nominal heat output up to 50 kW – Requirements and test methods
EN 12815:2001Residential cookers fired by solid fuel – Requirements and test methods
EN 12839:2012 (new)Precast concrete products – Elements for fences
EN 12843:2004Precast concrete products – Masts and poles
EN 12859:2011Gypsum blocks – Definitions, requirements and test methods
EN 12860:2001Gypsum based adhesives for gypsum blocks – Definitions, requirements and test methods
EN 12878:2005Pigments for the colouring of building materials based on cement and/or lime – Specifications and methods of test
EN 12899-1:2007Fixed, vertical road traffic signs – Part 1: Fixed signs
EN 12899-2:2007Fixed, vertical road traffic signs – Part 2: Transilluminated traffic bollards (TTB)
EN 12899-3:2007Fixed, vertical road traffic signs – Part 3: Delineator posts and retroreflectors
EN 12951:2004Prefabricated accessories for roofing – Permanently fixed roof ladders – Product specification and test methods
EN 12966-1:2005+A1:2009Road vertical signs – Variable message traffic signs – Part 1: Product standard
EN 13024-2:2004Glass in building – Thermally toughened borosilicate safety glass – Part 2: Evaluation of conformity/Product standard
EN 1304:2005Clay roofing tiles and fittings – Product definitions and specifications
EN 13043:2002Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
EN 13055-1:2002Lightweight aggregates – Part 1: Lightweight aggregates for concrete, mortar and grout
EN 13055-2:2004Lightweight aggregates – Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13063-1:2005+A1:2007Chimneys – System chimneys with clay/ceramic flue liners – Part 1: Requirements and test methods for sootfire resistance
EN 13063-2:2005+A1:2007Chimneys – System chimneys with clay/ceramic flue liners – Part 2: Requirements and test methods under wet conditions
EN 13063-3:2007Chimneys – System chimneys with clay/ceramic flue liners – Part 3: Requirements and test methods for air flue system chimneys
EN 13069:2005Chimneys – Clay/ceramic outer walls for system chimneys – Requirements and test methods
EN 13084-5:2005Free-standing chimneys – Part 5: Material for brick liners – Product specifications
EN 13084-7:2005Free-standing chimneys – Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
EN 13101:2002Steps for underground man entry chambers – Requirements, marking, testing and evaluation of conformity
EN 13108-1:2006Bituminous mixtures – Material specifications – Part 1: Asphalt Concrete
EN 13108-2:2006Bituminous mixtures – Material specifications – Part 2: Asphalt Concrete for very thin layers
EN 13108-3:2006Bituminous mixtures – Material specifications – Part 3: Soft Asphalt
EN 13108-4:2006Bituminous mixtures – Material specifications – Part 4: Hot Rolled Asphalt
EN 13108-5:2006Bituminous mixtures – Material specifications – Part 5: Stone Mastic Asphalt
EN 13108-6:2006Bituminous mixtures – Material specifications – Part 6: Mastic Asphalt
EN 13108-7:2006Bituminous mixtures – Material specifications – Part 7: Porous Asphalt
EN 13139:2002Aggregates for mortar
EN 13160-1:2003Leak detection systems – Part 1: General principles
EN 13162:2008Thermal insulation products for buildings – Factory made mineral wool (MW) products – Specification
EN 13163:2008Thermal insulation products for buildings – Factory made products of expanded polystyrene (EPS) – Specification
EN 13164:2008Thermal insulation products for buildings – Factory made products of extruded polystyrene foam (XPS) – Specification
EN 13165:2008Thermal insulation products for buildings – Factory made rigid polyurethane foam (PUR) products – Specification
EN 13166:2008Thermal insulation products for buildings – Factory made products of phenolic foam (PF) – Specification
EN 13167:2008Thermal insulation products for buildings – Factory made cellular glass (CG) products – Specification
EN 13168:2008Thermal insulation products for buildings – Factory made wood wool (WW) products – Specification
EN 13169:2008Thermal insulation products for buildings – Factory made products of expanded perlite (EPB) – Specification
EN 13170:2008Thermal insulation products for buildings – Factory made products of expanded cork (ICB) – Specification
EN 13171:2008Thermal insulating products for buildings – Factory made wood fibre (WF) products – Specification
EN 1317-5:2007+A2:2012 (new)Road restraint systems – Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
EN 1319:2009Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 13224:2011 (new)Precast concrete products – Ribbed floor elements
EN 13225:2004Precast concrete products – Linear structural elements
EN 13229:2001Inset appliances including open fires fired by solid fuels – Requirements and test methods
EN 13240:2001Roomheaters fired by solid fuel – Requirements and test methods
EN 13241-1:2003+A1:2011Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics
EN 13242:2002+A1:2007Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
EN 13245-2:2008Plastics – Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications – Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13249:2000Geotextiles and geotextile-related products – Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
EN 13250:2000Geotextiles and geotextile-related products – Characteristics required for use in the construction of railways
EN 13251:2000Geotextiles and geotextile-related products – Characteristics required for use in earthworks, foundations and retaining structures
EN 13252:2000Geotextiles and geotextile-related products – Characteristics required for use in drainage systems
EN 13253:2000Geotextiles and geotextile-related products – Characteristics required for use in erosion control works (coastal protection, bank revetments)
EN 13254:2000Geotextiles and geotextile-related products – Characteristics required for use in the construction of reservoirs and dams
EN 13255:2000Geotextiles and geotextile-related products – Characteristics required for use in the construction of canals
EN 13256:2000Geotextiles and geotextile-related products – Characteristics required for use in the construction of tunnels and underground structures
EN 13257:2000Geotextiles and geotextile-related products – Characteristics required for use in solid waste disposals
EN 13263-1:2005+A1:2009Silica fume for concrete – Part 1: Definitions, requirements and conformity criteria
EN 13265:2000Geotextiles and geotextile-related products – Characteristics required for use in liquid waste containment projects
EN 13279-1:2008Gypsum binders and gypsum plasters – Part 1: Definitions and requirements
EN 13310:2003Kitchen sinks – Functional requirements and test methods
EN 13341:2005+A1:2011Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels – Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of nionically polymerized polyamide 6 – Requirements and test methods
EN 13361:2004Geosynthetic barriers – Characteristics required for use in the construction of reservoirs and dams
EN 13362:2005Geosynthetic Barriers – Characteristics required for use in the construction of canals
EN 1337-3:2005Structural bearings – Part 3: Elastomeric bearings
EN 1337-4:2004Structural bearings – Part 4: Roller bearings
EN 1337-5:2005Structural bearings – Part 5: Pot bearings
EN 1337-6:2004Structural bearings – Part 6: Rocker bearings
EN 1337-7:2004Structural bearings – Part 7: Spherical and cylindrical PTFE bearings
EN 1337-8:2007Structural bearings – Part 8: Guide Bearings and Restraint Bearings
EN 1338:2003Concrete paving blocks – Requirements and test methods
EN 13383-1:2002Armourstone – Part 1: Specification
EN 1339:2003Concrete paving flags – Requirements and test methods
EN 1340:2003Concrete kerb units – Requirements and test methods
EN 13407:2006Wall-hung urinals – Functional requirements and test methods
EN 1341:2001Slabs of natural stone for external paving – Requirements and test methods
EN 1342:2001Setts of natural stone for external paving – Requirements and test methods
EN 1343:2001Kerbs of natural stone for external paving – Requirements and test methods
EN 1344:2002Clay pavers – Requirements and test methods EN 13450:2002Aggregates for railway ballast
EN 13454-1:2004Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate – Part 1: Definitions and requirements
EN 13479:2004Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials
EN 13491:2004Geosynthetic barriers – Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
EN 13492:2004Geosynthetic barriers – Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
EN 13493:2005Geosynthetic barriers – Characteristics required for use in the construction of solid waste storage and disposal sites
EN 13502:2002Chimneys – Requirements and test methods for clay/ceramic flue terminals
EN 13561:2004+A1:2008External blinds – Performance requirements including safety
EN 13564-1:2002Anti-flooding devices for buildings – Part 1: Requirements
EN 13616:2004Overfill prevention devices for static tanks for liquid petroleum fuels
EN 13658-1:2005Metal lath and beads – Definitions, requirements and test methods – Part 1: Internal plastering
EN 13658-2:2005Metal lath and beads – Definitions, requirements and test methods – Part 2: External rendering
EN 13659:2004+A1:2008Shutters – Performance requirements including safety
EN 13693:2004+A1:2009Precast concrete products – Special roof elements
EN 13707:2004+A2:2009Flexible sheets for waterproofing – Reinforced bitumen sheets for roof waterproofing – Definitions and characteristics
EN 13747:2005+A2:2010Precast concrete products – Floor plates for floor systems
EN 13748-1:2004Terrazzo tiles – Part 1: Terrazzo tiles for internal use
EN 13748-2:2004Terrazzo tiles – Part 2: Terrazzo tiles for external use
EN 13808:2005Bitumen and bituminous binders – Framework for specifying cationic bituminous emulsions
EN 13813:2002Screed material and floor screeds – Screed material – Properties and requirements
EN 13815:2006Fibrous gypsum plaster casts – Definitions, requirements and test methods
EN 13830:2003Curtain walling – Product standard
EN 13859-1:2010Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 1: Underlays for discontinuous roofing
EN 13859-2:2010Flexible sheets for waterproofing – Definitions and characteristics of underlays – Part 2: Underlays for walls
EN 13877-3:2004Concrete pavements – Part 3: Specifications for dowels to be used in concrete pavements
EN 13915:2007Prefabricated gypsum plasterboard panels with a cellular paperboard core – Definitions, requirements and test methods
EN 13924:2006Bitumen and bituminous binders – Specifications for hard paving grade bitumens
EN 13950:2005Gypsum plasterboard thermal/acoustic insulation composite panels – Definitions, requirements and test methods
EN 13956:2005Flexible sheet for waterproofing – Plastic and rubber sheets for roof waterproofing – Definitions and characteristics
EN 13963:2005Jointing materials for gypsum plasterboards – Definitions, requirements and test methods
EN 13964:2004Suspended ceilings – Requirements and test methods
EN 13967:2004Flexible sheets for waterproofing – Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet – Definitions and characteristics
EN 13969:2004Flexible sheets for waterproofing – Bitumen damp proof sheets including bitumen basement tanking sheets – Definitions and characteristics
EN 13970:2004Flexible sheets for waterproofing – Bitumen water vapour control layers – Definitions and characteristics
EN 13978-1:2005Precast concrete products – Precast concrete garages – Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
EN 13984:2004Flexible sheets for waterproofing – Plastic and rubber vapour control layers – Definitions and characteristics
EN 13986:2004Wood-based panels for use in construction – Characteristics, evaluation of conformity and marking
EN 14016-1:2004Binders for magnesite screeds – Caustic magnesia and magnesium chloride – Part 1: Definitions, requirements
EN 14023:2010Bitumen and bituminous binders – Specification framework for polymer modified bitumens
EN 14037-1:2003Ceiling mounted radiant panels supplied with water at temperature below 120 °C – Part 1: Technical specifications and requirements
EN 14041:2004Resilient, textile and laminate floor coverings – Essential characteristics
EN 14055:2010WC and urinal flushing cisterns
EN 14063-1:2004Thermal insulation products for buildings – In-situ formed expanded clay lightweight aggregate products – Part 1: Specification for the loose-fill products before installation
EN 14064-1:2010Thermal insulation products for buildings – In-situ formed loose-fill mineral wool (MW) products – Part 1: Specification for the loose-fill products before installation
EN 14080:2005Timber structures – Glued laminated timber – Requirements
EN 14081-1:2005+A1:2011Timber structures – Strength graded structural timber with rectangular cross section – Part 1: General requirements
EN 14178-2:2004Glass in building – Basic alkaline earth silicate glass products – Part 2: Evaluation of conformity/Product standard
EN 14179-2:2005Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard
EN 14188-1:2004Joint fillers and sealants – Part 1: Specifications for hot applied sealants
EN 14188-2:2004Joint fillers and sealants – Part 2: Specifications for cold applied sealants
EN 14188-3:2006Joint fillers and sealants – Part 3: Specifications for preformed joint seals
EN 14190:2005Gypsum plasterboard products from reprocessing – Definitions, requirements and test methods
EN 14195:2005Metal framing components for gypsum plasterboard systems – Definitions, requirements and test methods
EN 14209:2005Preformed plasterboard cornices – Definitions, requirements and test methods
EN 14216:2004Cement – Composition, specifications and conformity criteria for very low heat special cements
EN 14229:2010Structural timber – Wood poles for overhead lines
EN 1423:2012 (new)Road marking materials – Drop on materials – Glass beads, antiskid aggregates and mixtures of the two
EN 14246:2006Gypsum elements for suspended ceilings – Definitions, requirements and test methods
EN 14250:2010Timber structures – Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 14296:2005Sanitary appliances – Communal washing troughs
EN 14303:2009Thermal insulation products for building equipment and industrial installations – Factory made mineral wool (MW) products – Specification
EN 14304:2009Thermal insulation products for building equipment and industrial installations – Factory made flexible elastomeric foam (FEF) products – Specification
EN 14305:2009Thermal insulation products for building equipment and industrial installations – Factory made cellular glass (CG) products – Specification
EN 14306:2009Thermal insulation products for building equipment and industrial installations – Factory made calcium silicate (CS) products – Specification
EN 14307:2009Thermal insulation products for building equipment and industrial installations – Factory made extruded polystyrene foam (XPS) products – Specification
EN 14308:2009Thermal insulation products for building equipment and industrial installations – Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products – Specification
EN 14309:2009Thermal insulation products for building equipment and industrial installations – Factory made products of expanded polystyrene (EPS) – Specification
EN 14313:2009Thermal insulation products for building equipment and industrial installations – Factory made polyethylene foam (PEF) products – Specification
EN 14314:2009Thermal insulation products for building equipment and industrial installations – Factory made phenolic foam (PF) products – Specification
EN 14316-1:2004Thermal insulation products for buildings – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation
EN 14317-1:2004Thermal insulation products for buildings – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation
EN 14321-2:2005Glass in building – Thermally toughened alkaline earth silicate safety glass – Part 2: Evaluation of conformity/Product standard
EN 1433:2002Drainage channels for vehicular and pedestrian areas – Classification, design and testing requirements, marking and evaluation of conformity
EN 14339:2005Underground fire hydrants
EN 14342:2005+A1:2008Wood flooring – Characteristics, evaluation of conformity and marking
EN 14351-1:2006+A1:2010Windows and doors – Product standard, performance characteristics – Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
EN 14353:2007+A1:2010Metal beads and feature profiles for use with gypsum plasterboards – Definitions, requirements and test methods
EN 14374:2004Timber structures – Structural laminated veneer lumber – Requirements
EN 14384:2005Pillar fire hydrants
EN 14388:2005Road traffic noise reducing devices – Specifications
EN 14396:2004Fixed ladders for manholes
EN 14399-1:2005High-strength structural bolting assemblies for preloading – Part 1: General requirements
EN 14411:2006Ceramic tiles – Definitions, classification, characteristics and marking
EN 14428:2004+A1:2008Shower enclosures – Functional requirements and test methods
EN 14449:2005Glass in building – Laminated glass and laminated safety glass – Evaluation of conformity/Product standard
EN 14471:2005Chimneys – System chimneys with plastic flue liners – Requirements and test methods
EN 14496:2005Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards – Definitions, requirements and test methods
EN 14509:2006Self-supporting double skin metal faced insulating panels – Factory made products – Specifications
EN 14516:2006+A1:2010Baths for domestic purposes
EN 14527:2006+A1:2010Shower trays for domestic purposes
EN 14528:2007Bidets – Functional requirements and test methods
EN 14545:2008Timber structures – Connectors – Requirements
EN 14566:2008+A1:2009Mechanical fasteners for gypsum plasterboard systems – Definitions, requirements and test methods
EN 1457-1:2012 (new)Chimneys – Clay/ceramic flue liners – Part 1: Flue liners operating under dry conditions – Requirements and test methods
EN 1457-2:2012 (new)Chimneys – Clay/ceramic flue liners – Part 2: Flue liners operating under wet conditions – Requirements and test methods
EN 14592:2008Timber structures – Dowel-type fasteners – Requirements
EN 14604:2005Smoke alarm devices
EN 1463-1:2009Road marking materials – Retroreflecting road studs – Part 1: Initial performance requirements
EN 14647:2005Calcium aluminate cement – Composition, specifications and conformity criteria
EN 14680:2006Adhesives for non-pressure thermoplastic piping systems – Specifications
EN 14688:2006Sanitary appliances – Wash basins – Functional requirements and test methods
EN 1469:2004Natural stone products – Slabs for cladding – Requirements
EN 14695:2010Flexible sheets for waterproofing – Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete – Definitions and characteristics
EN 14716:2004Stretched ceilings – Requirements and test methods
EN 14782:2006Self-supporting metal sheet for roofing, external cladding and internal lining – Product specification and requirements
EN 14783:2006Fully supported metal sheet and strip for roofing, external cladding and internal lining – Product specification and requirements
EN 14785:2006Residential space heating appliances fired by wood pellets – Requirements and test methods
EN 14800:2007Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 14814:2007Adhesives for thermoplastic piping systems for fluids under pressure – Specifications
EN 14843:2007Precast concrete products – Stairs
EN 14844:2006+A2:2011 (new)Precast concrete products – Box culverts
EN 14846:2008Building hardware – Locks and latches – Electromechanically operated locks and striking plates – Requirements and test methods
EN 14889-1:2006Fibres for concrete – Part 1: Steel fibres – Definitions, specifications and conformity
EN 14889-2:2006Fibres for concrete – Part 2: Polymer fibres – Definitions, specifications and conformity
EN 14904:2006Surfaces for sports areas – Indoor surfaces for multi-sports use – Specification
EN 14909:2006Flexible sheets for waterproofing – Plastic and rubber damp proof courses – Definitions and characteristics
EN 14915:2006Solid wood panelling and cladding – Characteristics, evaluation of conformity and marking
EN 14933:2007Thermal insulation and light weight fill products for civil engineering applications – Factory made products of expanded polystyrene (EPS) – Specification
EN 14934:2007Thermal insulation and light weight fill products for civil engineering applications – Factory made products of extruded polystyrene foam (XPS) – Specification
EN 14963:2006Roof coverings – Continuous rooflights of plastics with or without upstands – Classification, requirements and test methods
EN 14964:2006Rigid underlays for discontinuous roofing – Definitions and characteristics
EN 14967:2006Flexible sheets for waterproofing – Bitumen damp proof courses – Definitions and characteristics
EN 14989-1:2007Chimneys – Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications – Part 1: Vertical air/flue terminals for C6-type appliances
EN 14989-2:2007Chimneys – Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications – Part 2: Flue and air supply ducts for room sealed appliances
EN 14991:2007Precast concrete products – Foundation elements
EN 14992:2007Precast concrete products – Wall elements
EN 15037-1:2008Precast concrete products – Beam-and-block floor systems – Part 1: Beams
EN 15037-2:2009+A1:2011Precast concrete products – Beam-and-block floor systems – Part 2: Concrete blocks
EN 15037-3:2009+A1:2011Precast concrete products – Beam-and-block floor systems – Part 3: Clay blocks
EN 15037-4:2010Precast concrete products – Beam-and-block floor systems – Part 4: Expanded polystyrene blocks
EN 1504-2:2004Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 2: Surface protection systems for concrete
EN 1504-3:2005Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 3: Structural and non-structural repair
EN 1504-4:2004Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 4: Structural bonding
EN 1504-5:2004Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 5: Concrete injection
EN 1504-6:2006Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 6: Anchoring of reinforcing steel bar
EN 1504-7:2006Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 7: Reinforcement corrosion protection
EN 15048-1:2007Non-preloaded structural bolting assemblies – Part 1: General requirements
EN 15050:2007+A1:2012 (new)Precast concrete products – Bridge elements
EN 15069:2008Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
EN 15088:2005Aluminium and aluminium alloys – Structural products for construction works – Technical conditions for inspection and delivery
EN 15102:2007+A1:2011 (new)Decorative wall coverings – Roll and panel form
EN 15129:2009Anti-seismic devices
EN 15167-1:2006Ground granulated blast furnace slag for use in concrete, mortar and grout – Part 1: Definitions, specifications and conformity criteria
EN 1520:2011Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 15250:2007Slow heat release appliances fired by solid fuel – Requirements and test methods
EN 15258:2008-Precast concrete products – Retaining wall elements
EN 15274:2007General purpose adhesives for structural assembly – Requirements and test methods
EN 15275:2007Structural adhesives – Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
EN 15283-1:2008+A1:2009Gypsum boards with fibrous reinforcement – Definitions, requirements and test methods – Part 1: Gypsum boards with mat reinforcement
EN 15283-2:2008+A1:2009Gypsum boards with fibrous reinforcement – Definitions, requirements and test methods – Part 2: Gypsum fibre boards
EN 15285:2008Agglomerated stone – Modular tiles for flooring and stairs (internal and external)
EN 15322:2009Bitumen and bituminous binders – Framework for specifying cut-back and fluxed bituminous binders
EN 15368:2008+A1:2010Hydraulic binder for non-structural applications – Definition, specifications and conformity criteria
EN 15381:2008Geotextiles and geotextile-related products – Characteristics required for use in pavements and asphalt overlays
EN 15382:2008Geosynthetic barriers – Characteristics required for use in transportation infrastructure
EN 15435:2008Precast concrete products – Normal weight and lightweight concrete shuttering blocks – Product properties and performance
EN 15498:2008Precast concrete products – Wood-chip concrete shuttering blocks – Product properties and performance
EN 15599-1:2010Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from expanded perlite (EP) products – Part 1: Specification for bonded and loose-fill products before installation
EN 15600-1:2010Thermal insulation products for building equipment and industrial installations – In-situ thermal insulation formed from exfoliated vermiculite (EV) products – Part 1: Specification for bonded and loose-fill products before installation
EN 15650:2010Ventilation for buildings – Fire dampers
EN 15743:2010Supersulfated cement – Composition, specifications and conformity criteria
EN 15821:2010Multi-firing sauna stoves fired by natural wood logs – Requirements and test methods
EN 15824:2009Specifications for external renders and internal plasters based on organic binders
EN 1748-1-2:2004Glass in building – Special basic products – Borosilicate glasses – Part 1-2: Evaluation of conformity/Product standard
EN 1748-2-2:2004Glass in building – Special basic products – Glass ceramics – Part 2-2: Evaluation of conformity/Product standard
EN 179:2008Building hardware – Emergency exit devices operated by a lever handle or push pad, for use on escape routes – Requirements and test methods
EN 1806:2006Chimneys – Clay/ceramic flue blocks for single wall chimneys – Requirements and test methods
EN 1825-1:2004Grease separators – Part 1: Principles of design, performance and testing, marking and quality control
EN 1856-1:2009Chimneys – Requirements for metal chimneys – Part 1: System chimney products
EN 1856-2:2009Chimneys – Requirements for metal chimneys – Part 2: Metal flue liners and connecting flue pipes
EN 1857:2010Chimneys – Components – Concrete flue liners
EN 1858:2008+A1:2011Chimneys – Components – Concrete flue blocks
EN 1863-2:2004Glass in building – Heat strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard
EN 1873:2005Prefabricated accessories for roofing – Individual roof lights of plastics – Product specification and test methods
EN 1916:2002Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1917:2002Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
EN 1935:2002Building hardware – Single-axis hinges – Requirements and test methods
EN 197-1:2011 (new)Cement – Part 1: Composition, specifications and conformity criteria for common cements
EN 295-10:2005Vitrified clay pipes and fittings and pipe joints for drains and sewers – Part 10: Performance requirements
EN 331:1998Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 40-4:2005Lighting columns – Part 4: Requirements for reinforced and prestressed concrete lighting columns
EN 40-5:2002Lighting columns – Part 5: Requirements for steel lighting columns
EN 40-6:2002Lighting columns – Part 6: Requirements for aluminium lighting columns
EN 413-1:2011Masonry cement – Part 1: Composition, specifications and conformity criteria
EN 416-1:2009Single burner gas-fired overhead radiant tube heaters for non-domestic use – Part 1: Safety
EN 438-7:2005High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 442-1:1995Radiators and convectors – Part 1: Technical specifications and requirements
EN 450-1:2005+A1:2007Fly ash for concrete – Part 1: Definition, specifications and conformity criteria
EN 459-1:2010Building lime – Part 1: Definitions, specifications and conformity criteria
EN 490:2011 (new)Concrete roofing tiles and fittings for roof covering and wall cladding – Product specifications
EN 492:2004Fibre-cement slates and fittings – Product specification and test methods
EN 494:2004+A3:2007Fibre-cement profiled sheets and fittings – Product specification and test methods
EN 516:2006Prefabricated accessories for roofing – Installations for roof access – Walkways, treads and steps
EN 517:2006Prefabricated accessories for roofing – Roof safety hooks
EN 520:2004+A1:2009Gypsum plasterboards – Definitions, requirements and test methods
EN 523:2003Steel strip sheaths for prestressing tendons – Terminology, requirements, quality control
EN 534:2006+A1:2010Corrugated bitumen sheets – Product specification and test methods
EN 54-10:2002Fire detection and fire alarm systems – Part 10: Flame detectors – Point detectors
EN 54-11:2001Fire detection and fire alarm systems – Part 11: Manual call points
EN 54-12:2002Fire detection and fire alarm systems – Part 12: Smoke detectors – Line detectors using an optical light beam
EN 54-16:2008Fire detection and fire alarm systems – Part 16: Voice alarm control and indicating equipment
EN 54-17:2005Fire detection and fire alarm systems – Part 17: Short-circuit isolators
EN 54-18:2005Fire detection and fire alarm systems – Part 18: Input/output devices
EN 54-2:1997Fire detection and fire alarm systems – Part 2: Control and indicating equipment
EN 54-20:2006Fire detection and fire alarm systems – Part 20: Aspirating smoke detectors
EN 54-21:2006Fire detection and fire alarm systems – Part 21: Alarm transmission and fault warning routing equipment
EN 54-23:2010Fire detection and fire alarm systems – Part 23: Fire alarm devices – Visual alarm devices
EN 54-24:2008Fire detection and fire alarm systems – Part 24: Components of voice alarm systems – Loudspeakers
EN 54-25:2008Fire detection and fire alarm systems – Part 25: Components using radio links
EN 54-3:2001Fire detection and fire alarm systems – Part 3: Fire alarm devices – Sounders
EN 54-4:1997Fire detection and fire alarm systems – Part 4: Power supply equipment
EN 544:2011Bitumen shingles with mineral and/or synthetic reinforcements – Product specification and test methods
EN 54-5:2000Fire detection and fire alarm systems – Part 5: Heat detectors – Point detectors
EN 54-7:2000Fire detection and fire alarm systems – Part 7: Smoke detectors – Point detectors using scattered light, transmitted light or ionization
EN 572-9:2004Glass in building – Basic soda lime silicate glass products – Part 9: Evaluation of conformity/Product standard
EN 588-2:2001Fibre cement pipes for drains and sewers – Part 2: Manholes and inspection chambers
EN 598:2007+A1:2009Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods
EN 621:2009Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 671-1:2001Fixed firefighting systems – Hose systems – Part 1: Hose reels with semi-rigid hose
EN 671-2:2001Fixed firefighting systems – Hose systems – Part 2: Hose systems with lay-flat hose
EN 681-1:1996Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 1: Vulcanized rubber
EN 681-2:2000Elastomeric Seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 2: Thermoplastic elastomers
EN 681-3:2000Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 3: Cellular materials of vulcanized rubber
EN 681-4:2000Elastomeric seals – Materials requirements for pipe joint seals used in water and drainage applications – Part 4: Cast polyurethane sealing elements
EN 682:2002Elastomeric Seals – Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 771-1:2011Specification for masonry units – Part 1: Clay masonry units
EN 771-2:2011Specification for masonry units – Part 2: Calcium silicate masonry units
EN 771-3:2011Specification for masonry units – Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-4:2011Specification for masonry units – Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2011Specification for masonry units – Part 5: Manufactured stone masonry units
EN 771-6:2011Specification for masonry units – Part 6: Natural stone masonry units
EN 777-1:2009Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 1: System D – Safety
EN 777-2:2009Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 2: System E – Safety
EN 777-3:2009Multi-burner gas-fired overhead radiant tube heater systems for non domestic use – Part 3: System F – Safety
EN 777-4:2009Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use – Part 4: System H – Safety
EN 778:2009Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 845-1:2003+A1:2008Specification for ancillary components for masonry – Part 1: Ties, tension straps, hangers and brackets
EN 845-2:2003Specification for ancillary components for masonry – Part 2: Lintels
EN 845-3:2003+A1:2008Specification for ancillary components for masonry – Part 3: Bed joint reinforcement of steel meshwork
EN 858-1:2002Separator systems for light liquids (e.g. oil and petrol) – Part 1: Principles of product design, performance and testing, marking and quality control
EN 877:1999Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 934-2:2009Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling
EN 934-3:2009Admixtures for concrete, mortar and grout – Part 3: Admixtures for masonry mortar – Definitions, requirements, conformity and marking and labelling
EN 934-4:2009Admixtures for concrete, mortar and grout – Part 4: Admixtures for grout for prestressing tendons – Definitions, requirements, conformity, marking and labelling
EN 934-5:2007Admixtures for concrete, mortar and grout – Part 5: Admixtures for sprayed concrete – Definitions, requirements, conformity, marking and labelling
EN 969:2009Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
EN 997:2012 (new)WC pans and WC suites with integral trap
EN 998-1:2010Specification for mortar for masonry – Part 1: Rendering and plastering mortar
EN 998-2:2010Specification for mortar for masonry – Part 2: Masonry mortar
Comments are closed.